ATM-FORUM-ADDR-REG
- Registered at
- 1.3.6.1.4.1.353.2.6.11.3.6.1.4.1.353.2.7.11.3.6.1.4.1.353.2.11.1
- Namespace
- standard
- Source file
ATM-FORUM-ADDR-REG- Digest
sha256:32f82a9c8b2b309bc1a7e62a69540ef19391c4b774e4b8cc016cde37e25837e4
Imports
| From | Symbols |
|---|---|
| ATM-FORUM-TC-MIB | AtmAddress, NetPrefix, atmfAddressGroup, atmfAddressRegistrationAdminGroup, atmfNetPrefixGroup |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-FORUM-ADDR-REG ATM-FORUM-TC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| atmfAddressTable OBJECT-TYPE A table implemented by the network-side IME, containing the ATM-layer addresses in effect on the user side of the UNI. | 1.3.6.1.4.1.353.2.6.1 | not-accessible | mandatory | |
| atmfAddressEntry OBJECT-TYPE Information about a single ATM-layer address in effect on the user-side IME. Note that the index variable atmAddressAtmAddress is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies. | 1.3.6.1.4.1.353.2.6.1.1 | not-accessible | mandatory | |
| atmfAddressPort OBJECT-TYPE A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI. | 1.3.6.1.4.1.353.2.6.1.1.1 | INTEGER (0..2147483647) | read-only | mandatory |
| atmfAddressAtmAddress OBJECT-TYPE The ATM address which is in effect on the user side of the ATM UNI port. | 1.3.6.1.4.1.353.2.6.1.1.2 | AtmAddress | read-only | mandatory |
| atmfAddressStatus OBJECT-TYPE An indication of the validity of the ATM address at the user side of the UNI port. To configure a new address in this table, the user-side IME must set the appropriate instance of this object to the value valid(1). To delete an existing address in this table, the user-side IME must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side IME which cause an address to become invalid, the network-side IME modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at any time, either immediately or subsequently. | 1.3.6.1.4.1.353.2.6.1.1.3 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |
| atmfAddressOrgScope OBJECT-TYPE This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. If the user-side IME does not specify a value for the atmfAddressOrgScope object, the network shall set the value of this object to localNetwork(1), if the registered address is an ATM group address, or to global(15), if the registered address is an individual address. Refer to Annex 6.0 of ATM Forum UNI Signalling 4.0 for guidelines regarding the use of organizational scopes. This organization hierarchy may be mapped to ATM network's routing hierarchy such as PNNI's routing level and the mapping shall be configurable in nodes. Use of this object in a public network is for further study. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses. | 1.3.6.1.4.1.353.2.6.1.1.4 | INTEGER {localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15)} | read-write | mandatory |
| atmfNetPrefixTable OBJECT-TYPE A table implemented by the user-side IME, containing the network-prefix(es) for ATM-layer addresses in effect on the user side of the UNI. | 1.3.6.1.4.1.353.2.7.1 | not-accessible | mandatory | |
| atmfNetPrefixEntry OBJECT-TYPE Information about a single network-prefix for ATM-layer addresses in effect on the user-side IME. Note that the index variable atmNetPrefixPrefix is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies. | 1.3.6.1.4.1.353.2.7.1.1 | not-accessible | mandatory | |
| atmfNetPrefixPort OBJECT-TYPE A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the special meaning of identifying the local UNI. | 1.3.6.1.4.1.353.2.7.1.1.1 | INTEGER (0..2147483647) | read-only | mandatory |
| atmfNetPrefixPrefix OBJECT-TYPE The network prefix for ATM addresses which is in effect on the user side of the ATM UNI port. | 1.3.6.1.4.1.353.2.7.1.1.2 | NetPrefix | read-only | mandatory |
| atmfNetPrefixStatus OBJECT-TYPE An indication of the validity of the network prefix for ATM addresses on the user side of the UNI port. To configure a new network prefix in this table, the network-side IME must set the appropriate instance of this object to the value valid(1). To delete an existing network prefix in this table, the network-side IME must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the user-side IME which cause a prefix to become invalid, the user-side IME modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular prefix becomes invalid(2), the conceptual row for that prefix may be removed from the table at any time, either immediately or subsequently. | 1.3.6.1.4.1.353.2.7.1.1.3 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |
| atmfAddressRegistrationAdminTable OBJECT-TYPE A table of Address Registration administrative information for the ATM Interface. | 1.3.6.1.4.1.353.2.11.1 | not-accessible | mandatory | |
| atmfAddressRegistrationAdminEntry OBJECT-TYPE An entry in the table, containing Address Registration administrative information for the ATM Interface. | 1.3.6.1.4.1.353.2.11.1.1 | not-accessible | mandatory | |
| atmfAddressRegistrationAdminIndex OBJECT-TYPE The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. | 1.3.6.1.4.1.353.2.11.1.1.1 | INTEGER (0..2147483647) | read-only | mandatory |
| atmfAddressRegistrationAdminStatus OBJECT-TYPE An indication of whether or not Address Registration is supported on this ATM Interface. Supported(1) indicates that this ATM Interface supports address registration. Unsupported(2) indicates that this ATM Interface does not support address registration. | 1.3.6.1.4.1.353.2.11.1.1.2 | INTEGER {supported(1), unsupported(2)} | read-only | mandatory |