MIBs Depot

AT-PRI-MIB

Registered at
1.3.6.1.4.1.207.8.4.4.4.42
Last updated
2006-06-28 12:22
Organization
Allied Telesis, Inc
Revisions
2006-06-28 12:22
Namespace
allied
Source file
AT-PRI-MIB
Digest
sha256:8ae1b213d9946feafd5261e1b496af8e5008855d68d6ae60283d00f60b5e4ab6

Description

This MIB file contains definitions of managed objects for the PRI module.

Contact

http://www.alliedtelesis.com

Imports

FromSymbols
AT-SMI-MIBDisplayStringUnsized, modules
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AT-PRI-MIB
AT-SMI-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
priIntTable
OBJECT-TYPE
The table of PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.1not-accessiblecurrent
priIntEntry
OBJECT-TYPE
A single entry in the PRI interfaces table.
1.3.6.1.4.1.207.8.4.4.4.42.1.1not-accessiblecurrent
priIntIndex
OBJECT-TYPE
The ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.1INTEGERread-onlycurrent
priIntBoardIndex
OBJECT-TYPE
The index in the arBoardTable of the board on which this PRI interface resides.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.2INTEGERread-onlycurrent
priIntBoardPosition
OBJECT-TYPE
The position on this PRI interface's board of this PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.3INTEGERread-onlycurrent
priIntMode
OBJECT-TYPE
The mode of operation of this PRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the entire interface is operating as TDM groups and the value mixed means that some channels in the interface are dedicated to ISDN and some to TDM groups.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.4INTEGER {isdn(1), tdm(2), mixed(3)}read-onlycurrent
priIntTdmChannelMap
OBJECT-TYPE
A bit map of the channels in the PRI interface which are dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.5INTEGERread-onlycurrent
priIntIsdnChannelMap
OBJECT-TYPE
A bit map of the channels in the PRI interface which are dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.6INTEGERread-onlycurrent
priIntType
OBJECT-TYPE
The type of primary rate interface. E1 has 30 B + D channel, T1 has 23 B + D channel. If the value unknown is returned for this object, the exact PRI type has not yet been determined.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.7INTEGER {e1(1), t1(2), unknown(3)}read-onlycurrent
priChanTable
OBJECT-TYPE
The table of channels on PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.2not-accessiblecurrent
priChanEntry
OBJECT-TYPE
A single entry in the PRI channels table.
1.3.6.1.4.1.207.8.4.4.4.42.2.1not-accessiblecurrent
priChanIntIndex
OBJECT-TYPE
The ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.1INTEGERread-onlycurrent
priChanChannelIndex
OBJECT-TYPE
The channel index of the PRI channel. Valid channels have indices from 1 to 31. The D channel on an E1 interface has index 16, the D channel on a T1 interface has index 24.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.2INTEGER (1..31)read-onlycurrent
priChanMode
OBJECT-TYPE
The mode of this PRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use by TDM. For the D channel, this object will usually have the value isdn. An exception is if the interface is running common D channel mode and the D channel is reserved for TDM.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.3INTEGER {isdn(1), tdm(2), neither(3)}read-onlycurrent
priChanState
OBJECT-TYPE
The state of this PRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. The value active means that the channel is in use, either by an ISDN call or an active TDM group.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.4INTEGER {inactive(1), active(2)}read-onlycurrent