AT-DS3-MIB
- Registered at
- 1.3.6.1.4.1.207.8.4.4.4.109
- Last updated
- 2006-06-28 12:22
- Organization
- Allied Telesis, Inc
- Revisions
- 2006-06-28 12:22
- Namespace
- allied
- Source file
AT-DS3-MIB- Digest
sha256:72ce01b325b7a6d0c96d5898543be1c9e2a68baabda31c1974f63614c9be12b8
Description
This MIB file contains definitions of managed objects for the DS3 module.
Contact
http://www.alliedtelesis.com
Imports
| From | Symbols |
|---|---|
| AT-SMI-MIB | DisplayStringUnsized, modules |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
AT-DS3-MIB AT-SMI-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ds3Traps OBJECT-IDENTITY | 1.3.6.1.4.1.207.8.4.4.4.109.0 | |||
| ds3TrapTable OBJECT-TYPE The ATR enterprise DS3 trap table. | 1.3.6.1.4.1.207.8.4.4.4.109.1 | not-accessible | current | |
| ds3TrapEntry OBJECT-TYPE An entry in the ATR enterprise DS3 trap table. | 1.3.6.1.4.1.207.8.4.4.4.109.1.1 | not-accessible | current | |
| ds3TcaTrapEnable OBJECT-TYPE Indicates whether the threshold crossing alert traps should be generated for this interface. | 1.3.6.1.4.1.207.8.4.4.4.109.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| ds3TrapError OBJECT-TYPE This variable shows which kind of parameter or primitive caused the trap. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoError shows no trap has occured | 1.3.6.1.4.1.207.8.4.4.4.109.1.1.2 | INTEGER {ds3NoError(1), ds3PES(2), ds3PSES(3), ds3SEFs(4), ds3UAS(5), ds3LCVs(6), ds3PCVs(7), ds3LESs(8), ds3CCVs(9), ds3CESs(10), ds3CSESs(11)} | read-only | current |
| ds3TrapLoc OBJECT-TYPE This variable shows whether the trap was caused by a problem at the local or remote end. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoLoc shows no trap had occured. | 1.3.6.1.4.1.207.8.4.4.4.109.1.1.3 | INTEGER {ds3NoLoc(1), ds3Near(2), ds3Far(3)} | read-only | current |
| ds3TrapInterval OBJECT-TYPE This variable shows whether the counter which has crossed the threshold is a twenty four hour or fifteen minute counter. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoInt shows no trap has occured. | 1.3.6.1.4.1.207.8.4.4.4.109.1.1.4 | INTEGER {ds3NoInt(1), ds3Fifteen(2), ds3Twentyfour(3)} | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| tcaTrap NOTIFICATION-TYPE A DS3 trap is generated when a threshold crossing alert occurs. This happens when an error count exceeds a pre determined value. The values are counted over 15 minute and 24 hour periods. Once a trap has occured in a given period it may not occur again within the same period. | 1.3.6.1.4.1.207.8.4.4.4.109.0.1 | current |