MIBs Depot

ASANTE-SWITCH-MIB

Registered at
1.3.6.1.4.1.298.1.5
1.3.6.1.4.1.298.2.2.11
1.3.6.1.4.1.298.2.2.12
1.3.6.1.4.1.298.2.2.13
1.3.6.1.4.1.298.2.2.16
1.3.6.1.4.1.298.2.2.17
1.3.6.1.4.1.298.2.2.22
1.3.6.1.4.1.298.2.2.23
Namespace
asante
Source file
ASANTE-SWITCH-MIB
Digest
sha256:8d6e26af8b12e38251c3aea7251a3cb59414c18221e4cdbc424e898fd35bd6b9

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ASANTE-SWITCH-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MacAddress
type

Objects

NameOIDSyntaxAccessStatus
asante
OBJECT-IDENTITY
1.3.6.1.4.1.298
products
OBJECT-IDENTITY
1.3.6.1.4.1.298.1
snmpAgent
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1
agentSw
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1.1
agentRunTimeImageMajorVer
OBJECT-TYPE
The major software version number of the agent runtime image.
1.3.6.1.4.1.298.1.1.1.1INTEGERread-onlymandatory
agentRunTimeImageMinorVer
OBJECT-TYPE
The minor software version number of the agent runtime image.
1.3.6.1.4.1.298.1.1.1.2INTEGERread-onlymandatory
agentImageLoadMode
OBJECT-TYPE
Tells agent device whether the software image is to be loaded from the FLASH EPROM or from over the network.
1.3.6.1.4.1.298.1.1.1.3INTEGER {other(1), localBoot(2), netBoot(3)}read-writemandatory
agentRemoteBootInfo
OBJECT-TYPE
The method for getting boot information.
1.3.6.1.4.1.298.1.1.1.4INTEGER {other(1), eepromBootInfo(2)}read-onlymandatory
agentRemoteBootProtocol
OBJECT-TYPE
The boot protocol that is used to load the agent image software.
1.3.6.1.4.1.298.1.1.1.5INTEGER {other(1), bootp-tftp(2), tftp-only(3)}read-writemandatory
agentRemoteBootFile
OBJECT-TYPE
The boot file name that is sent to the boot file server by agent boot code during boot time. For IntraStack switch, this file is the image file.
1.3.6.1.4.1.298.1.1.1.6DisplayString (SIZE(0..64))read-writemandatory
agentOutBandDialString
OBJECT-TYPE
This is the initialization string used by the Network Management station to establish an out-of-band connection.
1.3.6.1.4.1.298.1.1.1.7DisplayString (SIZE(0..64))read-writemandatory
agentOutBandBaudRate
OBJECT-TYPE
The baud rate setting for the out-of-band port.
1.3.6.1.4.1.298.1.1.1.8INTEGER {other(1), b1200(2), b2400(3), b4800(4), b9600(5), b19200(6)}read-writemandatory
agentReset
OBJECT-TYPE
The object to allow software to perform 'push-button' system reset.
1.3.6.1.4.1.298.1.1.1.9INTEGER {other(1), reset(2), not-reset(3)}read-writemandatory
agentFw
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1.2
agentFwMajorVer
OBJECT-TYPE
The major firmware version number of the agent PROM code.
1.3.6.1.4.1.298.1.1.2.1INTEGERread-onlymandatory
agentFwMinorVer
OBJECT-TYPE
The minor firmware version number of the agent PROM code.
1.3.6.1.4.1.298.1.1.2.2INTEGERread-onlymandatory
agentHw
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1.3
agentHwReVer
OBJECT-TYPE
The hardware version number of the switch.
1.3.6.1.4.1.298.1.1.3.1INTEGERread-onlymandatory
agentHwVer
OBJECT-TYPE
The hardware model number of the switch.
1.3.6.1.4.1.298.1.1.3.2INTEGERread-onlymandatory
agentNetProtoStkCapMap
OBJECT-TYPE
This octet string represents the current protocol stack configuration supported by the agent, encoded as a bit string. Each protocol statck is represented by a single bit. When the value of a bit = 1, it indicates that the protocol stack on the agent represented by that bit is supported; when zero, the protocol stack is not supported. The first protocol stack will encode in the least significant bit of the first octet. Currently, only IP Stack(bit 0) and IPX Stack(bit 1) are defined; all other bits should be zero.
1.3.6.1.4.1.298.1.1.4OCTET STRING (SIZE(4))read-onlymandatory
agentNetProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1.5
ipagentProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.1.5.1
ipagentIpAddr
OBJECT-TYPE
The IP agent's administrative IP address. The current operational IP address can be obtained from ipAdEntAddr in the ipAddrTable. This parameter will take effect only after an agent restart or reset. This parameter will always be updated in EEPROM.
1.3.6.1.4.1.298.1.1.5.1.1IpAddressread-writemandatory
ipagentIpNetMask
OBJECT-TYPE
The ipagent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from ipAdEntMask in the ipAddrTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM.
1.3.6.1.4.1.298.1.1.5.1.2IpAddressread-writemandatory
ipagentDefaultGateway
OBJECT-TYPE
The ip agent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from ipRouteDest in the ipRouteTable. This parameter will take effect only after an agent restart or reset. This parameter will always be updated in EEPROM.
1.3.6.1.4.1.298.1.1.5.1.3IpAddressread-writemandatory
ipagentBootServerAddr
OBJECT-TYPE
The IP address of the boot server that is used to boot this ipagent. This parameter will always be updated in the EEPROM.
1.3.6.1.4.1.298.1.1.5.1.4IpAddressread-writemandatory
ipagentUnAuthIP
OBJECT-TYPE
The IP address of the last station that tried to access this ipagent with an invalid community string.
1.3.6.1.4.1.298.1.1.5.1.5IpAddressread-onlymandatory
ipagentUnAuthComm
OBJECT-TYPE
The community string of the last station that tried to access this ipagent with an invalid community string.
1.3.6.1.4.1.298.1.1.5.1.6DisplayStringread-onlymandatory
ipagentTrapRcvrTable
OBJECT-TYPE
Table listing the Network Management Stations that are to receive traps generated by this agent.
1.3.6.1.4.1.298.1.1.5.2not-accessiblemandatory
ipagentTrapRcvrEntry
OBJECT-TYPE
Destination IP address and community string for a particular trap receiver. Entries can be added or deleted. To add an entry, all objects which have read-write access defined in the same table should be set in one set request with a valid value in the object ipagentTrapRcvrStatus. To delete an entry, set ipagentTrapRcvrStatus to invalid.
1.3.6.1.4.1.298.1.1.5.2.1not-accessiblemandatory
ipagentTrapRcvrIpAddr
OBJECT-TYPE
IP address of the management station to receive traps.
1.3.6.1.4.1.298.1.1.5.2.1.1IpAddressread-onlymandatory
ipagentTrapRcvrStatus
OBJECT-TYPE
Validation status of this entry. If the value of this object is set to invalid(3), then that particular entry is deemed invalid, meaning that the address for that entry is no longer valid because the entry has been removed from the table.
1.3.6.1.4.1.298.1.1.5.2.1.2INTEGER {other(1), valid(2), invalid(3)}read-writemandatory
ipagentTrapRcvrComm
OBJECT-TYPE
Community string for traps sent to this trap receiver.
1.3.6.1.4.1.298.1.1.5.2.1.3DisplayStringread-writemandatory
switch
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5
eAsntSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1
eSWAgent
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.1
eSWAgentSW
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.1.1
eSWUpDownloadAction
OBJECT-TYPE
Agent upload/download action. May refer to the configuration file or image file. The upload action is valid only for the configuration file.
1.3.6.1.4.1.298.1.5.1.1.1.1INTEGER {other(1), off(2), download(3), upload(4)}read-writemandatory
eSWUpDownloadStatus
OBJECT-TYPE
Result of the last upload/download request by this agent.
1.3.6.1.4.1.298.1.5.1.1.1.2INTEGER {other(1), action-Success(2), action-Failure(3), in-Progress(4), no-Action(5), configError(6)}read-onlymandatory
eSWRemoteDownloadFile
OBJECT-TYPE
Downloading what kind of file. The configuration file name should be stored in the agentRemoteBootFile MIB object, and the image file name should be stored in the eSWImageFileName MIB object. If this object has the value Config-File(1), agentRemoteBootProtocol cannot be set to bootp-tftp(2). If agentRemoteBootProtocol is set to bootp-tftp(2), this object cannot be set to Config-File(1). This object value is meaningful only at download time.
1.3.6.1.4.1.298.1.5.1.1.1.3INTEGER {other(1), config-File(2), image-File(3)}read-writemandatory
eSWRemoteConfigServer
OBJECT-TYPE
The IP address of the configuration file server.
1.3.6.1.4.1.298.1.5.1.1.1.4IpAddressread-writemandatory
eSWRemoteConfigFileName
OBJECT-TYPE
The name of switch configuration file. The server's IP address is in eSWRemoteConfigServer.
1.3.6.1.4.1.298.1.5.1.1.1.5DisplayString (SIZE(0..64))read-writemandatory
eSWConfigRetryCounter
OBJECT-TYPE
The number of times the agent will retry a failed image file download.
1.3.6.1.4.1.298.1.5.1.1.1.6INTEGER (1..20)read-writemandatory
eSWRemoteImageServer
OBJECT-TYPE
The IP address of the image file server.
1.3.6.1.4.1.298.1.5.1.1.1.7IpAddressread-writemandatory
eSWRemoteImageFileName
OBJECT-TYPE
The name of the switch image file.
1.3.6.1.4.1.298.1.5.1.1.1.8DisplayString (SIZE(0..64))read-writemandatory
eSWImageRetryCounter
OBJECT-TYPE
The number of times the agent will retry a failed configuration file download.
1.3.6.1.4.1.298.1.5.1.1.1.9INTEGER (1..20)read-writemandatory
eSWActiveImageBank
OBJECT-TYPE
The image bank from which runtime code will be loaded at next boot. If the value is set to other(1) the agent will boot from the default bank, i.e. Bank1(2).
1.3.6.1.4.1.298.1.5.1.1.1.10INTEGER {other(1), bank1(2), bank2(3)}read-writemandatory
eSWRemoteDownloadImageBank
OBJECT-TYPE
The number of the destination bank to which the image will be downloaded. 'other' will be recognized as the default bank, i.e. bank 1.
1.3.6.1.4.1.298.1.5.1.1.1.11INTEGER {other(1), bank1(2), bank2(3)}read-writemandatory
eSWResetWaitTime
OBJECT-TYPE
The time to wait before executing a reset of the agent. The time is in seconds, with a range of 1 second to 1 day.
1.3.6.1.4.1.298.1.5.1.1.1.12INTEGER (1..86400)read-writemandatory
eSWResetLeftTime
OBJECT-TYPE
Time left until the agent will reset. If a reset request is not in progress, this should have a value of 0.
1.3.6.1.4.1.298.1.5.1.1.1.13INTEGERread-onlymandatory
eSWBankImageInfoTable
OBJECT-TYPE
A table of information about the switch's image banks.
1.3.6.1.4.1.298.1.5.1.1.1.14not-accessiblemandatory
eSWBankImageInfoEntry
OBJECT-TYPE
A row in the image bank table containing information about a specific bank.
1.3.6.1.4.1.298.1.5.1.1.1.14.1not-accessiblemandatory
eSWBankIndex
OBJECT-TYPE
The index of bank image information table. It is the number of the image bank. Currently the IntraSwitch 62xx family supports 2 image banks.
1.3.6.1.4.1.298.1.5.1.1.1.14.1.1INTEGER (1..2)read-onlymandatory
eSWMajorVer
OBJECT-TYPE
The major version of the image file loaded in the bank. If this object and eSWMinorVer both have zero values, the bank has no image code loaded.
1.3.6.1.4.1.298.1.5.1.1.1.14.1.2INTEGERread-onlymandatory
eSWMinorVer
OBJECT-TYPE
The minor version number of the bank image software. If this object and eSWMajorVer both have zero values, the bank has no image code loaded.
1.3.6.1.4.1.298.1.5.1.1.1.14.1.3INTEGERread-onlymandatory
eSWDateTime
OBJECT-TYPE
The date and time of the image software loaded in this bank.
1.3.6.1.4.1.298.1.5.1.1.1.14.1.4DisplayStringread-onlymandatory
eSWTelnetSessions
OBJECT-TYPE
Number of concurrent Telnet sessions the agent will support.
1.3.6.1.4.1.298.1.5.1.1.1.15INTEGER (1..4)read-onlymandatory
eSWTelnetSessionActive
OBJECT-TYPE
Number of Telnet sessions active. This value cannot be greater than the value of eSWTelnetSessions.
1.3.6.1.4.1.298.1.5.1.1.1.16INTEGER (1..4)read-onlymandatory
eSWTelnetTimeOut
OBJECT-TYPE
Telnet session time-out value, in minutes. The default for this object is 5 minutes.
1.3.6.1.4.1.298.1.5.1.1.1.17INTEGER (1..60)read-writemandatory
eSWSTP
OBJECT-TYPE
Setting this value to enable(2) will cause the switch to perform the Spanning Tree Algorithm as described in IEEE 802.1d.Setting it to disable(3) will stop the Spanning Tree Algorithm for all ports on the switch. If STP is disabled, the state of all ports in this switch should be set to Forwarding. When STP is changed from Disabled(3) to Enabled(2), the state of all enabled ports will be changed from forwarding to blocking, and the switch will recalculate the spanning tree.
1.3.6.1.4.1.298.1.5.1.1.1.18INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWUserInterfaceTimeOut
OBJECT-TYPE
The console interface time-out value, in minutes. A value of 0 means that the console interface will not time out. The default is 5 minutes.
1.3.6.1.4.1.298.1.5.1.1.1.19INTEGER (0..60)read-writemandatory
eSWBCastMcastThreshold
OBJECT-TYPE
The switch will detect a Broadcast or Multicast storm on the network based on the value of this object. This value is represented as number of packets per second. The value must be greater than or equal to 7000 packets per second.
1.3.6.1.4.1.298.1.5.1.1.1.20INTEGERread-writemandatory
eSWBCastMcastDuration
OBJECT-TYPE
The switch will detect a Broadcast or Multicast storm on the network based on the value represented by this object. The switch will declare that a storm is present if the bcast/mcast rate is over the threshold defined by eSWBCastMcastThreshold for this duration of time. The value must be greater than or equal to 2 seconds.
1.3.6.1.4.1.298.1.5.1.1.1.21INTEGERread-writemandatory
eSWCfgFileErrStatus
OBJECT-TYPE
This object represents the results of previous Config File download operation. Each bit from least Significant bit represent a configuration section in the switch. Value 1 for a bit indicates that the corresponding section had error in previous config file configuration operation. Following is the detatiled section information. Bit 0 - System Administration section Bit 1 - IP section Bit 2 - Bootstrap section Bit 3 - SNMP section Bit 4 - Port section Bit 5 - STP section Bit 6 - VLAN section Bit 7 - NW Security section Bit 8 - Switch Stats and Duplicate IP Trap section Bit 9:15 - Reserved.
1.3.6.1.4.1.298.1.5.1.1.1.22OCTET STRING (SIZE(2))read-onlymandatory
eSWAgentHW
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.1.2
eSWDRAMSize
OBJECT-TYPE
DRAM installed on the switch, in bytes.
1.3.6.1.4.1.298.1.5.1.1.2.1INTEGERread-onlymandatory
eSWFlashRAMSize
OBJECT-TYPE
Flash RAM installed on the switch, in bytes.
1.3.6.1.4.1.298.1.5.1.1.2.2INTEGERread-onlymandatory
eSWEEPROMSize
OBJECT-TYPE
EEPROM installed on the switch, in bytes.
1.3.6.1.4.1.298.1.5.1.1.2.3INTEGERread-onlymandatory
eSWAgentFW
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.1.3
eSWBasic
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.2
eSWType
OBJECT-TYPE
The ethernet switch type.
1.3.6.1.4.1.298.1.5.1.2.1INTEGER {other(1), thunderBird(2), intraStack(3), intraSwitch(4), intraCore8000(5), intraCore9000(6)}read-onlymandatory
eSWBkpType
OBJECT-TYPE
The backplane type of this switch.
1.3.6.1.4.1.298.1.5.1.2.2INTEGER {other(1), no-Bkp(2), intraStack(3), intraSwitch6216M(4), intraSwitch6224(5), intraSwitch6224M(6), intraCore8000(7), intraCore9000(8)}read-onlymandatory
eSWGroupCapacity
OBJECT-TYPE
The number of groups that can be contained within the switch.
1.3.6.1.4.1.298.1.5.1.2.3INTEGERread-onlymandatory
eSWStackLastChange
OBJECT-TYPE
The value of sysUpTime at the last change of stack status. If no change has occurred since the stack was in operation, the value is zero.
1.3.6.1.4.1.298.1.5.1.2.4TimeTicksread-onlymandatory
eSWGroupInfoTable
OBJECT-TYPE
This is the table to describe basic information for each group of ports in the switch.
1.3.6.1.4.1.298.1.5.1.2.5not-accessiblemandatory
eSWGroupInfoEntry
OBJECT-TYPE
This is the entry to describe basic information for a particular group of ports.
1.3.6.1.4.1.298.1.5.1.2.5.1not-accessiblemandatory
eSWGrpIndex
OBJECT-TYPE
The group number, which is the index of the table.
1.3.6.1.4.1.298.1.5.1.2.5.1.1INTEGERread-onlymandatory
eSWGrpID
OBJECT-TYPE
The ID of this group module. This is the MAC address of the first port in the group.
1.3.6.1.4.1.298.1.5.1.2.5.1.2MacAddressread-onlymandatory
eSWGrpState
OBJECT-TYPE
A command to disable or enable a physical module in the switch device stack.
1.3.6.1.4.1.298.1.5.1.2.5.1.3INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWGrpNumofPorts
OBJECT-TYPE
The number of ports including expansion ports in the group.
1.3.6.1.4.1.298.1.5.1.2.5.1.4INTEGERread-onlymandatory
eSWGrpType
OBJECT-TYPE
The type of group module described by this entry.
1.3.6.1.4.1.298.1.5.1.2.5.1.5INTEGER {other(1), empty(2), intraSwitch(3), intraStack-Base(4), intraStack-FX8(5), intraStack-TX16(6), enterprise6216M-TX16(7), enterprise6224M-TX24(8), intraCore8000(9), intraCore-RJ45(10), intraCore-RJ21(11), intraCore-GIGA(12)}read-onlymandatory
eSWGrpDescrption
OBJECT-TYPE
A description of the group module described by this entry.
1.3.6.1.4.1.298.1.5.1.2.5.1.6DisplayStringread-onlymandatory
eSWGrpLED
OBJECT-TYPE
This octet string represents the current LED setting for this slot/group. Each octet in the string represents one led. LEDs on the front panel of the slot module are ordered from the top to the bottom and order in left to right. Each LED uses two bits for its action and state, two bits for color, and has four reserved bits. Bits 0-1: 00 -- LED on 01 -- LED off 10 -- LED blink. Bits 6-7: 00 -- unknown color, 01 -- green, 10 -- yellow, 11 -- amber. Bits 2-5 are reserved. The 62XX LEDs on the front panel are ordered by port LEDs followed by power, two MII (for 6216) and eight utilization LEDs(for 6224). The Octet String will be Port1, Port2, port3 ... , PortN 0 - 3, 4 - 7, 8 -11 ... , (N - 1) * 4 - (( N * 4) - 1). For the 6216, LED#65 is the power LED and 66 & 67 are MII LEDs. For the 6224, LED#97 represents the power and LEDs 98 - 105 represent utilization information. Port octets meaning : Octet 3 : Link Status. Octet 2 : Data RX/TX. Octet 1 : FDP. Octet 0 : Speed. Utilization octets meaning: Octet 7 : 90+ % Octet 6 : 75 - 90 % Octet 5 : 50 - 75 % Octet 4 : 25 - 50 % Octet 3 : 10 - 25 % Octet 2 : 5 - 10 % Octet 1 : 3 - 5 % Octet 0 : 1 - 3 %.
1.3.6.1.4.1.298.1.5.1.2.5.1.7OCTET STRING (SIZE(128))read-onlymandatory
eSWGrpFanStatus
OBJECT-TYPE
The value of this object describes the fan status. If there is more than one fan within the device, the indication shows any failure among the fans.
1.3.6.1.4.1.298.1.5.1.2.5.1.8INTEGER {other(1), no-fan(2), normal(3), fail(4), fan-1-bad(5), fan-2-bad(6), fan-1-2-bad(7)}read-onlymandatory
eSWGrpNumofExpPorts
OBJECT-TYPE
The number of expansion ports in this group.
1.3.6.1.4.1.298.1.5.1.2.5.1.9INTEGERread-onlymandatory
eSWGrpLastChange
OBJECT-TYPE
The value of sysUpTime at the last change in status of the group since it has been in operation. If no change has occurred since this group became operational, its value is zero. In IntraStack, this object is useful only for the base module.
1.3.6.1.4.1.298.1.5.1.2.5.1.10TimeTicksread-onlymandatory
eSWGrpReset
OBJECT-TYPE
This object represents the current group reset state.
1.3.6.1.4.1.298.1.5.1.2.5.1.11INTEGER {other(1), noReset(2), reset(3)}read-onlymandatory
eSWPortInfoTable
OBJECT-TYPE
A table containing basic information for each port in this switch.
1.3.6.1.4.1.298.1.5.1.2.6not-accessiblemandatory
eSWPortInfoEntry
OBJECT-TYPE
A table entry containing information about a specific port.
1.3.6.1.4.1.298.1.5.1.2.6.1not-accessiblemandatory
eSWPortGrpIndex
OBJECT-TYPE
The number of the group containing the port.
1.3.6.1.4.1.298.1.5.1.2.6.1.1INTEGERread-onlymandatory
eSWPortIndex
OBJECT-TYPE
The number of the port which this entry describes.
1.3.6.1.4.1.298.1.5.1.2.6.1.2INTEGERread-onlymandatory
eSWPortType
OBJECT-TYPE
The type port in this switch. MII-Empty(1) means there is no expansion module plugged in.
1.3.6.1.4.1.298.1.5.1.2.6.1.3INTEGER {other(1), mii-Empty(2), mii-FL(3), mii-RJ45(4), mii-FX(5), rj45(6), foil(7)}read-onlymandatory
eSWPortAutoNegAbility
OBJECT-TYPE
Indicates whether the port has Auto Negotiation signaling ability.
1.3.6.1.4.1.298.1.5.1.2.6.1.4INTEGER {other(1), with(2), without(3)}read-onlymandatory
eSWPortSpeed
OBJECT-TYPE
The working speed of this port. If the port's link is not up, this object should show the configured speed.
1.3.6.1.4.1.298.1.5.1.2.6.1.6INTEGER {other(1), m10-Mbps(2), m100-Mbps(3), g1-Gbps(4)}read-onlymandatory
eSWPortDuplex
OBJECT-TYPE
The duplex state of this port. When the port link is not up, this object should show the configured duplex information.
1.3.6.1.4.1.298.1.5.1.2.6.1.7INTEGER {other(1), half-Duplex(2), full-Duplex(3)}read-onlymandatory
eSWGpPtInfoTable
OBJECT-TYPE
A table describing the port information for each group in BYTE mapping method. The main purpose of creating this table is to reduce the SNMP parsing time and the load of network traffic.
1.3.6.1.4.1.298.1.5.1.2.7not-accessiblemandatory
eSWGpPtInfoEntry
OBJECT-TYPE
This is an entry of eSWGroupPortInfoTable.
1.3.6.1.4.1.298.1.5.1.2.7.1not-accessiblemandatory
eSWGpPtInfoIndex
OBJECT-TYPE
The group number .
1.3.6.1.4.1.298.1.5.1.2.7.1.1INTEGERread-onlymandatory
eSWGpPtInfoType
OBJECT-TYPE
This octet string is for the type of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortType.
1.3.6.1.4.1.298.1.5.1.2.7.1.2OCTET STRING (SIZE(64))read-onlymandatory
eSWGpPtInfoAutoNegAbility
OBJECT-TYPE
This octet string is for the auto negotiation ability of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortAutoNegAbility.
1.3.6.1.4.1.298.1.5.1.2.7.1.3OCTET STRING (SIZE(64))read-onlymandatory
eSWGpPtInfoSpeed
OBJECT-TYPE
This octet string is for the operating speed of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortSpeed.
1.3.6.1.4.1.298.1.5.1.2.7.1.5OCTET STRING (SIZE(64))read-onlymandatory
eSWGpPtInfoDuplex
OBJECT-TYPE
This octet string is for the Duplex state of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortDuplex.
1.3.6.1.4.1.298.1.5.1.2.7.1.6OCTET STRING (SIZE(64))read-onlymandatory
eSWPtMacInfoTable
OBJECT-TYPE
A table describing the MAC addresses learned on each port.
1.3.6.1.4.1.298.1.5.1.2.8not-accessiblemandatory
eSWPtMacInfoEntry
OBJECT-TYPE
Entry of eSWPtMacInfoTable.
1.3.6.1.4.1.298.1.5.1.2.8.1not-accessiblemandatory
eSWPtMacPort
OBJECT-TYPE
The port number in the switch.
1.3.6.1.4.1.298.1.5.1.2.8.1.1INTEGERread-onlymandatory
eSWPtMacMACADDR
OBJECT-TYPE
MAC address.
1.3.6.1.4.1.298.1.5.1.2.8.1.2MacAddressread-onlymandatory
eSWVlanInfo
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.2.9
eSWVlanVersion
OBJECT-TYPE
The version of VLAN implementation in the switch
1.3.6.1.4.1.298.1.5.1.2.9.1INTEGERread-onlymandatory
eSWVlanMaxCapacity
OBJECT-TYPE
The maximum number of VLANs that can be supported within the switch.
1.3.6.1.4.1.298.1.5.1.2.9.2INTEGERread-onlymandatory
eSWVlanTypesSupported
OBJECT-TYPE
The types of VLAN supported by the switch. Here each bit position indicates the type of VLAN supported by the switch. Bit 0 - Port based VLAN Bit 1 - MAC Address based VLAN Bit 3 - Protocol based VLAN
1.3.6.1.4.1.298.1.5.1.2.9.3INTEGERread-onlymandatory
eSWVlanTable
OBJECT-TYPE
A table describing the information about every VLAN associated with the switch.
1.3.6.1.4.1.298.1.5.1.2.9.4not-accessiblemandatory
eSWVlanEntry
OBJECT-TYPE
A list of information for each VLAN within the switch.
1.3.6.1.4.1.298.1.5.1.2.9.4.1not-accessiblemandatory
eSWVLANIndex
OBJECT-TYPE
Index in VLAN Configuration Table within the switch.
1.3.6.1.4.1.298.1.5.1.2.9.4.1.1INTEGERread-onlymandatory
eSWVlanName
OBJECT-TYPE
This octet string is the name of the VLAN. The length of the name can be up to 32 printable characters.
1.3.6.1.4.1.298.1.5.1.2.9.4.1.2DisplayString (SIZE(0..32))read-writemandatory
eSWVlanID
OBJECT-TYPE
A 12 bit indentifier for this VLAN. 0 - The NULL VLAN ID. It is used when the tagging header contains only user priority information; no VLAN identifier is present in the frame. This number is not allowed here. 1 - The default VLAN ID; To be used as default PVID for the port through which tagged frames will be sent within the switch. 4095 - Reserved for implementation use.
1.3.6.1.4.1.298.1.5.1.2.9.4.1.3INTEGERread-writemandatory
eSWVlanMemberSet
OBJECT-TYPE
The set of ports to which traffic destined for this VLAN may be transmitted. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, ech port of the switch is represented by a single bit within the value of this object. Bit value 1 means the corresponding port is included in the member set and bit value 0 represents the port is not included.
1.3.6.1.4.1.298.1.5.1.2.9.4.1.4OCTET STRINGread-onlymandatory
eSWVlanMgmAccess
OBJECT-TYPE
This object provides enabling and disabling of switch management access. When this object for a VLAN entry is set to Enable(1), the switch management (Telnet, SNMP Agent, HTTP Server and ICMP serverices can be accessed by a corresponding manager in the VLAN. If this object of a VLAN entry is set to Disable(2), the switch management cannot be accessed in the VLAN.
1.3.6.1.4.1.298.1.5.1.2.9.4.1.5INTEGER {enable(1), disable(2)}read-writemandatory
eSWTrunkBundleCapacity
OBJECT-TYPE
The number of Trunk Bundles that can be supported within the switch.
1.3.6.1.4.1.298.1.5.1.2.10INTEGERread-onlymandatory
eSWTrunkBundleTable
OBJECT-TYPE
A table describing the Trunk Bundles information of the switch.
1.3.6.1.4.1.298.1.5.1.2.11not-accessiblemandatory
eSWTrunkBundleEntry
OBJECT-TYPE
This is an entry of eSWTrunkBundleTable.
1.3.6.1.4.1.298.1.5.1.2.11.1not-accessiblemandatory
eSWTrunkBundleIndex
OBJECT-TYPE
The index of eSWTrunkBundleTable table.
1.3.6.1.4.1.298.1.5.1.2.11.1.1INTEGERread-onlymandatory
eSWTrunkBundlePortA
OBJECT-TYPE
The ID of the first port of the Trunk Bundles.
1.3.6.1.4.1.298.1.5.1.2.11.1.2INTEGERread-onlymandatory
eSWTrunkBundlePortB
OBJECT-TYPE
The ID of the second port of the Trunk Bundles.
1.3.6.1.4.1.298.1.5.1.2.11.1.3INTEGERread-onlymandatory
eSWTrunkBundleState
OBJECT-TYPE
When this function is enabled, ports specified by port A and port B will form a Trunk Bundle to provide a fat communications channel.
1.3.6.1.4.1.298.1.5.1.2.11.1.4INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWNetSecurityInfo
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.2.13
eSWNetworkSecurityVersion
OBJECT-TYPE
The version of Network Security implementation in the switch
1.3.6.1.4.1.298.1.5.1.2.13.1INTEGERread-onlymandatory
eSWNetworkSecurityMAXLevels
OBJECT-TYPE
The maximum number of Security Levels that can be supported within the switch.
1.3.6.1.4.1.298.1.5.1.2.13.2INTEGERread-onlymandatory
eSWSecurityTypesSupported
OBJECT-TYPE
The type of network security supported by the switch. Here each bit position indicates the type of Network Security Levels supported by the Switch Bit 0 - VLAN Level Security Bit 1 - Port Level Security
1.3.6.1.4.1.298.1.5.1.2.13.3INTEGERread-onlymandatory
eSWSecConfigTable
OBJECT-TYPE
A table that contains information about the Security Configuration that is associated with each port of the switch.
1.3.6.1.4.1.298.1.5.1.2.13.4not-accessiblemandatory
eSWSecConfigEntry
OBJECT-TYPE
A list of information for each port within the switch.
1.3.6.1.4.1.298.1.5.1.2.13.4.1not-accessiblemandatory
eSWSecPortIndex
OBJECT-TYPE
The number of the port which this entry describes.
1.3.6.1.4.1.298.1.5.1.2.13.4.1.1INTEGERread-onlymandatory
eSWSecurityLevel
OBJECT-TYPE
Security Level Configured for the port.
1.3.6.1.4.1.298.1.5.1.2.13.4.1.2INTEGER {newNodeDetection(1), knownMACAddressForwarding(2), restrictedKnownMACAddressForwarding(3), knownMACAddressForwardingWithIntruderLock(4), normalPort(5), other(6)}read-writemandatory
eSWSecMonitorPort
OBJECT-TYPE
The port number within the switch which is configured as the monitor port. All the traffic from the Intruder Detection and Monitoring secured port will be also forwarded to the monitor port. Value of 0 indicates that no monitored port is been configured by the switch.
1.3.6.1.4.1.298.1.5.1.2.13.5INTEGERread-writemandatory
eSWSecurityTrapEnable
OBJECT-TYPE
The object is to allow the management to control the Security generated Enterprise Specific Trap.
1.3.6.1.4.1.298.1.5.1.2.13.6INTEGER {enable(1), disable(2), other(3)}read-writemandatory
eSWSecIncSetConfigTable
OBJECT-TYPE
A table describing the MAC addresses configured by the management for a port. This entries of the MAC Address are static entries (No aging will be performed on these MAC Addresses).
1.3.6.1.4.1.298.1.5.1.2.13.7not-accessiblemandatory
eSWSecIncSetConfigEntry
OBJECT-TYPE
Entry of eSWSecIncSetConfigTable.
1.3.6.1.4.1.298.1.5.1.2.13.7.1not-accessiblemandatory
eSWIncSetPort
OBJECT-TYPE
The port number in the switch associated with the Inclusive Set MAC Address.
1.3.6.1.4.1.298.1.5.1.2.13.7.1.1INTEGERread-onlymandatory
eSWIncSetMACAddr
OBJECT-TYPE
MAC address which is part of the Inclusive Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be forwarded by the Associated Port if the Port is set for Security Level 2 , Level 3 , Level 4.
1.3.6.1.4.1.298.1.5.1.2.13.7.1.2MacAddressread-onlymandatory
eSWIncSetMACStatus
OBJECT-TYPE
MAC address which is part of the Inclusive Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be forwarded by the Associated Port if the Port is set for Security Level 2 , Level 3 , Level 4.
1.3.6.1.4.1.298.1.5.1.2.13.7.1.3INTEGER {valid(1), invalid(2)}read-writemandatory
eSWSecIntMACAddrTable
OBJECT-TYPE
A table containing Intruder MAC Addresses when any port is set to Security Level 2 or Security Level 4. In case of a Port set to Security Level 4 this table indicating the Intruder MAC Addresses are locked ( that is any station with its MAC Address in the table will not able to forward \ transmits using any of the switch Ports.
1.3.6.1.4.1.298.1.5.1.2.13.8not-accessiblemandatory
eSWSecIntMACAddrEntry
OBJECT-TYPE
Entry of eSWSecIntMACAddrTable.
1.3.6.1.4.1.298.1.5.1.2.13.8.1not-accessiblemandatory
eSWIntMACAddrPort
OBJECT-TYPE
The port number in the switch associated with the Inturder MAC Address.
1.3.6.1.4.1.298.1.5.1.2.13.8.1.1INTEGERread-onlymandatory
eSWIntMACAddr
OBJECT-TYPE
Intruder MAC Address.
1.3.6.1.4.1.298.1.5.1.2.13.8.1.2MacAddressread-onlymandatory
eSWFilteringInfo
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.2.14
eSWFilteringTypesSupported
OBJECT-TYPE
The type of Filtering Configuration supported by the switch. Here each bit position indicates the type of Filtering Configuration Levels supported by the Switch Bit 0 - VLAN Level MAC Address Filtering Bit 1 - Port Level MAC Address Filtering Bit 2 - VLAN Level Protocol Type Filtering Bit 3 - Port Level Protocol Type Filtering
1.3.6.1.4.1.298.1.5.1.2.14.1INTEGERread-onlymandatory
eSWFiltMACVLANBasedConfigTable
OBJECT-TYPE
A table describing the filtering MAC addresses configured by the management for a VLAN. This entries of the MAC Address are static entries. No aging will be performed on these MAC Addresses.
1.3.6.1.4.1.298.1.5.1.2.14.2not-accessiblemandatory
eSWFiltMACVLANBasedConfigEntry
OBJECT-TYPE
Entryof eSWFiltMACVLANBasedConfigTable.
1.3.6.1.4.1.298.1.5.1.2.14.2.1not-accessiblemandatory
eSWVIDIndex
OBJECT-TYPE
Index in VLAN Configuration Table within the switch for which the Filtering MAC Address is associated.
1.3.6.1.4.1.298.1.5.1.2.14.2.1.1INTEGERread-onlymandatory
eSWFiltMACAddr
OBJECT-TYPE
MAC Address which will be filtered in the indexed VID, when appear in source MAC Address field of the frame.
1.3.6.1.4.1.298.1.5.1.2.14.2.1.2MacAddressread-onlymandatory
eSWFiltMACSts
OBJECT-TYPE
MAC address which is part of the VLAN Based Filtering MAC Address Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be filtered in the indexed VID.
1.3.6.1.4.1.298.1.5.1.2.14.2.1.3INTEGER {valid(1), invalid(2)}read-writemandatory
eSWFiltMACPortBasedConfigTable
OBJECT-TYPE
A table describing the filtering MAC addresses configured by the management for a port. This entries of the MAC Address are static entries No aging will be performed on this MAC Addresses.
1.3.6.1.4.1.298.1.5.1.2.14.3not-accessiblemandatory
eSWFiltMACPortBasedConfigEntry
OBJECT-TYPE
Entry of eSWFiltMACPortBasedConfigTable.
1.3.6.1.4.1.298.1.5.1.2.14.3.1not-accessiblemandatory
eSWFiltPortIndex
OBJECT-TYPE
The Port number in the switch.
1.3.6.1.4.1.298.1.5.1.2.14.3.1.1INTEGERread-writemandatory
eSWFiltPMACAddr
OBJECT-TYPE
MAC Address which will be filtered in the indexed Port, when appear in destination MAC Address field of the frame.
1.3.6.1.4.1.298.1.5.1.2.14.3.1.2MacAddressread-writemandatory
eSWFiltPMACStatus
OBJECT-TYPE
This field indicates status associated with the MAC Address.
1.3.6.1.4.1.298.1.5.1.2.14.3.1.3INTEGER {valid(1), invalid(2)}read-writemandatory
eSWFiltProtVLANBasedCFGTable
OBJECT-TYPE
A table describing the filtering Protocol Type configured by the management for a port.
1.3.6.1.4.1.298.1.5.1.2.14.4not-accessiblemandatory
eSWFiltProtVLANBasedCFGEntry
OBJECT-TYPE
Entry of eSWFiltProtVLANBasedCFGTable.
1.3.6.1.4.1.298.1.5.1.2.14.4.1not-accessiblemandatory
eSWFiltProtocolVID
OBJECT-TYPE
Index in VLAN Configuration Table within the switch for which the Filtering Protocol Type is associated.
1.3.6.1.4.1.298.1.5.1.2.14.4.1.1INTEGERread-writemandatory
eSWFiltVLANProtocolType
OBJECT-TYPE
This object represents the Protocol Type Filter as applied to the Indexed VID. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit 0 : Filter OUT All AppleTalk Protocol Packets Bit 1 : Filter OUT All Banyan VINES Protocol Packets Bit 2 : Filter OUT All IBM Netbios Protocol Packets Bit 3 : Filter OUT All IPX/SPX Novell Protocol Packets Bit 4 : Filter OUT All IP Protocol Packets Bit 5 : Filter OUT All Unknown Protocol Packets that are not defined by the above protocol Filtering bits ( Bit 0-4) Bit 6 - 7 - Reserved.
1.3.6.1.4.1.298.1.5.1.2.14.4.1.2OCTET STRING (SIZE(1))read-writemandatory
eSWFiltProtPortBasedCFGTable
OBJECT-TYPE
A table describing the filtering Protocol Type configured by the management for a port.
1.3.6.1.4.1.298.1.5.1.2.14.5not-accessiblemandatory
eSWFiltProtPortBasedCFGEntry
OBJECT-TYPE
Entry of eSWFiltProtPortBasedCFGTable.
1.3.6.1.4.1.298.1.5.1.2.14.5.1not-accessiblemandatory
eSWFiltProtPort
OBJECT-TYPE
The Port number in the switch.
1.3.6.1.4.1.298.1.5.1.2.14.5.1.1INTEGERread-writemandatory
eSWFiltProtcolType
OBJECT-TYPE
This object represents the Protocol Type Filter as applied to the Indexed Port. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit 0 : Filter OUT All AppleTalk Protocol Packets Bit 1 : Filter OUT All Banyan VINES Protocol Packets Bit 2 : Filter OUT All IBM Netbios Protocol Packets Bit 3 : Filter OUT All IPX/SPX Novell Protocol Packets Bit 4 : Filter OUT All IP Protocol Packets Bit 5 : Filter OUT All Unknown Protocol Packets that are not defined by the above protocol Filtering bits ( Bit 0-4) Bit 6 - 7 - Reserved.
1.3.6.1.4.1.298.1.5.1.2.14.5.1.2OCTET STRING (SIZE(1))read-writemandatory
eSWCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.3
eSWPortCtrlTable
OBJECT-TYPE
A table describing the port control information for each port in this group.
1.3.6.1.4.1.298.1.5.1.3.1not-accessiblemandatory
eSWPortCtrlEntry
OBJECT-TYPE
An entry describing control information for a specific port.
1.3.6.1.4.1.298.1.5.1.3.1.1not-accessiblemandatory
eSWGrpPtCtrlIndex
OBJECT-TYPE
The group containing the port for which this entry has information.
1.3.6.1.4.1.298.1.5.1.3.1.1.1INTEGERread-onlymandatory
eSWPortCtrlIndex
OBJECT-TYPE
The port number for this entry.
1.3.6.1.4.1.298.1.5.1.3.1.1.2INTEGERread-onlymandatory
eSWPortCtrlState
OBJECT-TYPE
Identifies whether the port is administratively enabled or disabled.
1.3.6.1.4.1.298.1.5.1.3.1.1.3INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWPortCtrlBcastFilter
OBJECT-TYPE
Broadcast packet filtering control. If this is enabled, broadcast packets received on this port will be filtered out. The default is Disable(3).
1.3.6.1.4.1.298.1.5.1.3.1.1.4INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWPortCtrlStNFw
OBJECT-TYPE
Enables or disables store-and-forward switching for this port When set to Enable(2) the frame will be forwarded after it has been completely received and checksummed. When set to Disable(3), the port will use fragment-free switching.
1.3.6.1.4.1.298.1.5.1.3.1.1.5INTEGER {other(1), enable(2), disable(3)}read-writemandatory
eSWPortCtrlSTP
OBJECT-TYPE
If this function is enable(1) and eSWPortCtrlState is also enable(1), that means this port will join the Spanning Tree Algorithm (STP) caculation. Asante 6016/6024 switches do not support individual port STP participation enable/disable, therefore this object will have the same value for all ports.
1.3.6.1.4.1.298.1.5.1.3.1.1.6INTEGER {other(1), enable(2), disable(3)}read-onlymandatory
eSWPortCtrlVlanID
OBJECT-TYPE
The 12 bit port VLAN indentifier for this port within the switch. 0 - The NULL VLAN ID. It is used when the tagging header contains only user priority information; no VLAN identifier is present in the frame. This number is not allowed here. 1 - The default VLAN ID; To be used as default PVID for the port through which tagged frames will be sent within the switch. 4095 - Reserved for implementation use.
1.3.6.1.4.1.298.1.5.1.3.1.1.7INTEGERread-writemandatory
eSWPortCtrlVlanTagging
OBJECT-TYPE
Whether a frame should be tagged with VLAN Tagging Header when transmitted through this port within the switch. Enable - Use Asante proprietary tagging mechanism on this port wihtin the switch. Enable8021Q - Use 802.1Q standard tagging on this port within the switch. Disable - Disable the tagging on this port within the switch.
1.3.6.1.4.1.298.1.5.1.3.1.1.8INTEGER {enable(1), enable8021Q(2), disable(3)}read-writemandatory
eSWPortCtrlVlanGroups
OBJECT-TYPE
This object represents the port vlan map in 2 octets. The octets meaning is as follow: If 2 octets are considered together as 16 bit field, then the least significant bit (bit0) represents VLAN Group1, bit1 represents VLAN Group2, ..., bit14 represents VLAN Group15. If a bit is set (bit value = 1) then the port in question is a member of the VLAN Group represented by the bit.
1.3.6.1.4.1.298.1.5.1.3.1.1.9OCTET STRING (SIZE(2))read-writemandatory
eSWPortCtrlTrunkBundleIndex
OBJECT-TYPE
A value of 0 means that the port does not belong to any trunk Bundle. A non-zero value is the index of the Trunk Bundle to which this port belongs.
1.3.6.1.4.1.298.1.5.1.3.1.1.10INTEGERread-onlymandatory
eSWPortCtrlGVRPEnable
OBJECT-TYPE
This entry when set to enable, means GVRP frames can be transmitted and received on this port. If disabled, it means GVRP frames cannot be transmitted on this port and the received GVRP frames should be discarded. Default value for this entry is disable(2).
1.3.6.1.4.1.298.1.5.1.3.1.1.11INTEGER {enable(1), disable(2)}read-writemandatory
eSWPortCtrlSecurityLevel
OBJECT-TYPE
Security Level associated with the port. When set to Normal Port (5) , the Security Level (if present) will be cleared.
1.3.6.1.4.1.298.1.5.1.3.1.1.12INTEGER {newNodeDetection(1), knownMACAddressForwarding(2), restrictedKnownMACAddressForwarding(3), knownMACAddressForwardingWithIntruderLock(4), normalPort(5), other(6)}read-writemandatory
eSWPortProtocolFilter
OBJECT-TYPE
This object represents the Protocol Level Security Filter as applied to the Port. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit 0 : Filter OUT All AppleTalk Protocol Packets Bit 1 : Filter OUT All Banyan VINES Protocol Packets Bit 2 : Filter OUT All IBM Netbios Protocol Packets Bit 3 : Filter OUT All IPX/SPX Novell Protocol Packets Bit 4 : Filter OUT All IP Protocol Packets Bit 5 : Filter OUT All Unknown Protocol Packets that are not defined by the above protocol Filtering bits (Bit 0-4) Bit 6 - 7 - Reserved.
1.3.6.1.4.1.298.1.5.1.3.1.1.13OCTET STRING (SIZE(2))read-writemandatory
eSWGpPtCtrlTable
OBJECT-TYPE
A table containing control information for each port in a group. This table is indexed by the group number. It uses a BYTE mapping method. Each byte represents control information for a port in this group. The main purpose of creating this table is to reduce the SNMP engine parsing time and the load of network traffic.
1.3.6.1.4.1.298.1.5.1.3.2not-accessiblemandatory
eSWGpPtCtrlEntry
OBJECT-TYPE
An entry of table eSWGpPtCtrlTable.
1.3.6.1.4.1.298.1.5.1.3.2.1not-accessiblemandatory
eSWGpPtCtrlIndex
OBJECT-TYPE
The index of this table. It is the group number.
1.3.6.1.4.1.298.1.5.1.3.2.1.1INTEGERread-onlymandatory
eSWGpPtCtrlState
OBJECT-TYPE
This octet string displays the administrative enable/disable state of each port in the group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortCtrlState.
1.3.6.1.4.1.298.1.5.1.3.2.1.2OCTET STRING (SIZE(64))read-writemandatory
eSWGpPtCtrlBcastFilter
OBJECT-TYPE
This octet string displays the broadcast filter state for each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortCtrlBcastFilter.
1.3.6.1.4.1.298.1.5.1.3.2.1.3OCTET STRING (SIZE(64))read-writemandatory
eSWGpPtCtrlStNFw
OBJECT-TYPE
This octet string displays the switching technique (store-and-forward or fragment-free) being used by each port in the group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortCtrlStNFw.
1.3.6.1.4.1.298.1.5.1.3.2.1.4OCTET STRING (SIZE(64))read-onlymandatory
eSWGpPtCtrlSTP
OBJECT-TYPE
This octet string displays the individual port's participation in the Spanning Tree Algorithm. Asante 62xx switches do not support individual port STP participation, so all ports should show the same value. Each octet stores the value from eSWPortCtrlSTP.
1.3.6.1.4.1.298.1.5.1.3.2.1.5OCTET STRING (SIZE(64))read-onlymandatory
eSWGpPtCtrlSecurityLevel
OBJECT-TYPE
This octet string is for the Security Level information of each port in the group. Each octet represents one port; therefore , the octet 0 is port 1 and the octet 9 is port 10. Each octet stores the data from eSWPortCtrlSecurityLevel.
1.3.6.1.4.1.298.1.5.1.3.2.1.6OCTET STRING (SIZE(64))read-writemandatory
eSWGpPtProtocolFilter
OBJECT-TYPE
This octet string represents the Protocol Level Security Filter as applied to each Port. Each octet represents one port; therefore , the octet 0 is port 1 and the octet 9 is port 10. Each octet stores the data from eSWPortProtocolFilter.
1.3.6.1.4.1.298.1.5.1.3.2.1.7OCTET STRING (SIZE(64))read-writemandatory
eSWAutoPortCtrlTable
OBJECT-TYPE
A table containing information about each port's auto- negotiation information.
1.3.6.1.4.1.298.1.5.1.3.3not-accessiblemandatory
eSWAutoPortCtrlEntry
OBJECT-TYPE
A entry of eSWAutoPortControlTable. It uses eSWAutoNegGrpIndex and eSWAutoNegPortIndex to find the table entry.
1.3.6.1.4.1.298.1.5.1.3.3.1not-accessiblemandatory
eSWAutoNegGrpIndex
OBJECT-TYPE
The value of this object identifies the group for which this entry contains port auto-negotiation information.
1.3.6.1.4.1.298.1.5.1.3.3.1.1INTEGERread-onlymandatory
eSWAutoNegPortIndex
OBJECT-TYPE
The value of this object identifies the port for which this entry contains auto-negotiation information.
1.3.6.1.4.1.298.1.5.1.3.3.1.2INTEGERread-onlymandatory
eSWAutoNegAdminState
OBJECT-TYPE
A port which has auto-negotiation signaling ability will be enabled to do so when this object is set to enabled(2). If the object is set to disable(3) the port will operate as if it had no auto-negotiation ability.
1.3.6.1.4.1.298.1.5.1.3.3.1.3INTEGER {other(1), enabled(2), disable(3)}read-writemandatory
eSWAutoNegRemoteAble
OBJECT-TYPE
This object will be set to able(2) if the port has detected that the link partner has auto-negotiation ability.
1.3.6.1.4.1.298.1.5.1.3.3.1.4INTEGER {other(1), able(2), not-able(3)}read-onlymandatory
eSWAutoNegAutoConfig
OBJECT-TYPE
Indicates whether Auto Negotiation signaling is in progress or has completed.
1.3.6.1.4.1.298.1.5.1.3.3.1.5INTEGER {other(1), configuring(2), complete(3), disable(4), parallel-detect-fail(5), remote-fault(6)}read-onlymandatory
eSWAutoNegLocalAbility
OBJECT-TYPE
The connecting ability of local port. The capability of the local port will be represented by each bit in this 2 byte octet string. The meaning of each bit is as follows: 0: is not capable 1: is capable Bit 0 : undefined Bit 1 : 10Mbps Ethernet capable Bit 2 : 10Mbps Ethernet full duplex capable Bit 3 : 100BASE-TX capable Bit 4 : 100BASE-TX full duplex capable Bit 5 : 100BASE-FX full duplex capable Bit 6 : 100BASE-T4 capable Bit 7 : 802.9 capable Bit 8 - 15 : reserved Note that the bit ordering is such that the most significant bit (in network order) is bit 0.
1.3.6.1.4.1.298.1.5.1.3.3.1.6OCTET STRING (SIZE(2))read-onlymandatory
eSWAutoNegAdvertisedAbility
OBJECT-TYPE
This object represents the capabilities which will be advertised in the Auto-Negotiation sequence. The capability is indicated by each bit in this 2 byte octet string. 0: is not capable 1: is capable Bit 0 : default capabilities Bit 1 : 10Mbps Ethernet capable Bit 2 : 10Mbps Ethernet full duplex capable Bit 3 : 100BASE-TX capable Bit 4 : 100BASE-TX full duplex capable Bit 5 : 100BASE-FX full duplex capable Bit 6 : 100BASE-T4 capable Bit 7 : 802.9 capable Bit 8 - 15 : reserved Note that Auto-Negotiation will restart automatically if the supported capabilities are set. The bit ordering is such that the most significant bit (in network order) is Bit 0.
1.3.6.1.4.1.298.1.5.1.3.3.1.7OCTET STRING (SIZE(2))read-writemandatory
eSWAutoNegReceivedAbility
OBJECT-TYPE
Indicates the advertised capabilities of link partner. The capability will be represented by each bit in this 2 byte octet string. The meaning of each bit is as follows: 0: is not capable 1: is capable Bit 0 : undefined Bit 1 : 10Mbps Ethernet capable Bit 2 : 10Mbps Ethernet full duplex capable Bit 3 : 100BASE-TX capable Bit 4 : 100BASE-TX full duplex capable Bit 5 : 100BASE-FX full duplex capable Bit 6 : 100BASE-T4 capable Bit 7 : 802.9 capable Bit 8 - 15 : reserved Note that the bit ordering is such that the most significant bit (in network order) is bit 0.
1.3.6.1.4.1.298.1.5.1.3.3.1.8OCTET STRING (SIZE(2))read-onlymandatory
eSWAutoNegRestartAutoConfig
OBJECT-TYPE
Forces auto-negotiation to begin link negotiation. Has no effect if auto-negotiation signaling is diabled. Always returns noRestart(3).
1.3.6.1.4.1.298.1.5.1.3.3.1.9INTEGER {other(1), reStart(2), noRestart(3)}read-writemandatory
eSWMonitor
OBJECT-IDENTITY
1.3.6.1.4.1.298.1.5.1.4
eSWMonIPTable
OBJECT-TYPE
This table describes the source IP address and source MAC address mapping pair. It also provides a function to detect IP address duplication. This table can show that 2 MAC addresses map to the same IP address. It is an important function to help the system administrator to do network administration.
1.3.6.1.4.1.298.1.5.1.4.1not-accessiblemandatory
eSWMonIPEntry
OBJECT-TYPE
The entry of this table. The table is indexed by the MAC address.
1.3.6.1.4.1.298.1.5.1.4.1.1not-accessiblemandatory
eSWMonIP
OBJECT-TYPE
The IP address corresponding to the MAC address in eSWMonMAC.
1.3.6.1.4.1.298.1.5.1.4.1.1.1IpAddressread-onlymandatory
eSWMonMAC
OBJECT-TYPE
The source MAC address of the monitor entry.
1.3.6.1.4.1.298.1.5.1.4.1.1.2MacAddressread-onlymandatory
eSWMonVLANID
OBJECT-TYPE
The VLAN number of this monitor address entry.
1.3.6.1.4.1.298.1.5.1.4.1.1.3INTEGERread-onlymandatory
eSWMonGrp
OBJECT-TYPE
The IP address is learned from which group number.
1.3.6.1.4.1.298.1.5.1.4.1.1.4INTEGERread-onlymandatory
eSWMonPort
OBJECT-TYPE
The port on which the IP address was learned The agent should display value = (maximum number of ports in the system + 1) when reflecting the System's Management IP address.
1.3.6.1.4.1.298.1.5.1.4.1.1.5INTEGERread-onlymandatory
productId
OBJECT-IDENTITY
1.3.6.1.4.1.298.2
concProductId
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2
intraswitch
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.11
intrastack
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.12
friendlyswitch
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.13
intraSwitch6216M
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.16
intraSwitch6224
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.17
intraCore8000
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.22
intraCore9000
OBJECT-IDENTITY
1.3.6.1.4.1.298.2.2.23

Notifications

NameOIDStatus
eSWFanFail
NOTIFICATION-TYPE
The SNMP trap that is generated when a fan in the switch fails.
1.3.6.1.4.1.298.0.3
eSWExpPortConnectStateChange
NOTIFICATION-TYPE
This trap will be sent when an MII module is inserted or removed from the MII slot The trap contains the port number of the MII slot whose state has changed.
1.3.6.1.4.1.298.0.4
eSWIPSpoofing
NOTIFICATION-TYPE
This trap is caused by the detection of a duplicate IP address. It means that there are 2 or more stations using the same IP address. The first three parameters are the IP address, MAC address, and port number of the existing workstation. The remaining three parameters are the IP address, MAC address, and port number of to the workstation which is trying to spoof the network environment. Therefore, the IP addresses should be the same, but the MAC addresses are different.
1.3.6.1.4.1.298.0.5
eSWStationMove
NOTIFICATION-TYPE
The trap is caused by the detection of station moving.
1.3.6.1.4.1.298.0.6
eSWNewNodeDetected
NOTIFICATION-TYPE
The trap is generated when any port which is set for New Node Detection Security levels detects any New Node.
1.3.6.1.4.1.298.0.7
eSWIntruderDetected
NOTIFICATION-TYPE
The trap is generated when any port which is set for security levels 1) Known MAC Address Forwarding 2) Known MAC Address Forwarding with Intruder Lock detects any Intruder MAC Address.
1.3.6.1.4.1.298.0.8
eSWIntruderPortDisable
NOTIFICATION-TYPE
The trap is generated when any port which is set for security levels restricted Known MAC Address Forwarding detects Intruder MAC Address and disables the Port.
1.3.6.1.4.1.298.0.9
eSWEnhIPSpoofing
NOTIFICATION-TYPE
This trap is caused by the detection of a duplicate IP address. It means that there are 2 or more stations using the same IP address. The first parameter is the IP Address which is duplicated. The next three parameters are the MAC address, VLAN ID, Group number and port number of the switch from where the original IP-MAC Address binding was detected. The remaining three parameters are the MAC address, VLAN ID, Group number and Port number of the switch from where the spoofed IP-MAC Address binding was detected.
1.3.6.1.4.1.298.0.10
eSWEnhStationMove
NOTIFICATION-TYPE
The trap is caused by the detection of station movement. The first two parameters are the IP Address and MAC Address of the station which was moved across the switch ports. The next parameter is the VLAN ID to which eSWMonMAC MAC Address has been classified.The next two parameters are the Group number and Port number within the switch where the station was originally (first) detected. The next two parameters are the Group number and Port number within the switch where the station was moved.
1.3.6.1.4.1.298.0.11
eSWEnhNewNodeDetected
NOTIFICATION-TYPE
The trap is generated when any port which is set for New Node Detection Security level detects any New Node. The two parameters are the Group number and Port number. The next three parameters are the MAC Address ,VLAN ID (to which eSWMonMAC MAC Address has been classifiedand) and IP Address of the newly detected node.
1.3.6.1.4.1.298.0.12
eSWEnhIntruderDetected
NOTIFICATION-TYPE
The trap is generated when any secured port detects Intruder node. For the secured port Intruder nodes are the nodes whose MAC Address is not part of port trusted MAC Address set. The first two parameters are the Group number and Port number. The next three parameters are the MAC Address ,VLAN ID (to which eSWMonMAC MAC Address has been classifiedand) and IP Address of the Intruder Node.
1.3.6.1.4.1.298.0.13
eSWEnhIntruderPortDisable
NOTIFICATION-TYPE
The trap is generated when any port which is set for Intruder Port Disable security level detects Intruder MAC Address and disables the secured Port. For the secured port Intruder nodes are the nodes whose MAC Address is not part of port trusted MAC Address set. The first two parameters are the Group number and Port number. The next three parameters are the MAC Address ,VLAN ID (to which eSWMonMAC MAC Address has been classifiedand) and IP Address of the Intruder Node which caused the port to be disabled.
1.3.6.1.4.1.298.0.14