ASANTE-AH1012-MIB
- Registered at
- 1.3.6.1.4.1.298
- Namespace
- asante
- Source file
ASANTE-AH1012-MIB- Digest
sha256:dfc9d10a6a165f75e24abcc908ba0a6d0a69dac4ff31a824f821cd3b055f18f0
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso, private |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ASANTE-AH1012-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.298.1 | products | |
| 1.3.6.1.4.1.298.2 | productId |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DisplayString type | ||||
| PhysAddress type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| asante OBJECT-IDENTITY | 1.3.6.1.4.1.298 | |||
| products OBJECT-IDENTITY | 1.3.6.1.4.1.298.1 | |||
| snmpAgent OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1 | |||
| agentSw OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1.1 | |||
| agentRunTimeImageMajorVer OBJECT-TYPE The major software version number of the agent run time image. | 1.3.6.1.4.1.298.1.1.1.1 | INTEGER | read-only | mandatory |
| agentRunTimeImageMinorVer OBJECT-TYPE The minor software version number of the agent run time image. | 1.3.6.1.4.1.298.1.1.1.2 | INTEGER | read-only | mandatory |
| agentImageLoadMode OBJECT-TYPE Tells hub whether the software image is to be loaded from the FLASH EPROM or from over the network. | 1.3.6.1.4.1.298.1.1.1.3 | INTEGER {other(1), localBoot(2), netBoot(3)} | read-write | mandatory |
| agentRemoteBootInfo OBJECT-TYPE The method for getting boot parameter information. | 1.3.6.1.4.1.298.1.1.1.4 | INTEGER {other(1), eepromBootInfo(2)} | read-only | mandatory |
| agentRemoteBootProtocol OBJECT-TYPE The netboot protocol that used to load the agent software. | 1.3.6.1.4.1.298.1.1.1.5 | INTEGER {other(1), bootp-tftp(2), tftp-only(3)} | read-write | mandatory |
| agentRemoteBootFile OBJECT-TYPE The boot file name that is sent to the boot file server by agent boot code during boot time. | 1.3.6.1.4.1.298.1.1.1.6 | OCTET STRING (SIZE(0..64)) | read-write | mandatory |
| agentOutBandDialString OBJECT-TYPE This is the initialization string used by the Network Management station to establish the out-of-band connection for modem only. | 1.3.6.1.4.1.298.1.1.1.7 | OCTET STRING (SIZE(0..64)) | read-write | mandatory |
| agentOutBandBaudRate OBJECT-TYPE The baud rate setting for the out-of-band port. | 1.3.6.1.4.1.298.1.1.1.8 | INTEGER {other(1), b1200(2), b2400(3), b4800(4), b9600(5)} | read-write | mandatory |
| agentReset OBJECT-TYPE The object to allow software to perform 'push_button' system reset. | 1.3.6.1.4.1.298.1.1.1.9 | INTEGER {other(1), reset(2), not-reset(3)} | read-write | mandatory |
| agentFw OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1.2 | |||
| agentFwMajorVer OBJECT-TYPE The major firmware version number of the agent prom code. | 1.3.6.1.4.1.298.1.1.2.1 | INTEGER | read-only | mandatory |
| agentFwMinorVer OBJECT-TYPE The minor firmware version number of the agent prom code. | 1.3.6.1.4.1.298.1.1.2.2 | INTEGER | read-only | mandatory |
| agentHw OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1.3 | |||
| agentHwReVer OBJECT-TYPE The hardware reversion number of the network management module. | 1.3.6.1.4.1.298.1.1.3.1 | INTEGER | read-only | mandatory |
| agentHwVer OBJECT-TYPE The hardware model number of the network management module | 1.3.6.1.4.1.298.1.1.3.2 | INTEGER | read-only | mandatory |
| agentNetProtoStkCapMap OBJECT-TYPE This octet string represents the current protocol stack configuration supported by the agent, encoded as a bit string. Each protocol stack is represented by a single bit. When the value of a bit = 1, it indicates that the protocol stack on the agent represented by that bit is supported; when zero, the protocol stack is not supported. The number of octets in the string is always integer multiple of the octet. The first protocol stack will encode in the least significant bit of the first octet. Current, only IP Stack(bit 0) and IPX Stack(bit 1) were defined, all other bits should be zero. | 1.3.6.1.4.1.298.1.1.4 | OCTET STRING (SIZE(1..4)) | read-only | mandatory |
| agentNetProtocol OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1.5 | |||
| ipagentProtocol OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.1.5.1 | |||
| ipagentIpAddr OBJECT-TYPE The ipagent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM. | 1.3.6.1.4.1.298.1.1.5.1.1 | IpAddress | read-write | mandatory |
| ipagentIpNetMask OBJECT-TYPE The ipagent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM. | 1.3.6.1.4.1.298.1.1.5.1.2 | IpAddress | read-write | mandatory |
| ipagentDefaultGateway OBJECT-TYPE The ipagent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRouteTable. This parameter will take effect only after reset hub. This parameter will always be updated in the EEPROM. | 1.3.6.1.4.1.298.1.1.5.1.3 | IpAddress | read-write | mandatory |
| ipagentBootServerAddr OBJECT-TYPE The IP address of the boot server that was used for booting this ipagent. This parameter will always be updated in the EEPROM. | 1.3.6.1.4.1.298.1.1.5.1.4 | IpAddress | read-write | mandatory |
| ipagentUnAuthIP OBJECT-TYPE The IP address of the last station that tried to access this ipagent with an invalid community string. | 1.3.6.1.4.1.298.1.1.5.1.5 | IpAddress | read-only | mandatory |
| ipagentUnAuthComm OBJECT-TYPE The community string of the last station that tried to access this ipagent with an invalid community string. | 1.3.6.1.4.1.298.1.1.5.1.6 | OCTET STRING | read-only | mandatory |
| ipagentTrapRcvrTable OBJECT-TYPE Table consisting of the list of Network Management Stations that are to receive traps generated by this agent. | 1.3.6.1.4.1.298.1.1.5.2 | not-accessible | mandatory | |
| ipagentTrapRcvrEntry OBJECT-TYPE Destination IP address and community string for a particular trap server. | 1.3.6.1.4.1.298.1.1.5.2.1 | not-accessible | mandatory | |
| ipagentTrapRcvrIpAddr OBJECT-TYPE IP address for trap server receiving trap. | 1.3.6.1.4.1.298.1.1.5.2.1.1 | IpAddress | read-only | mandatory |
| ipagentTrapRcvrStatus OBJECT-TYPE Validation of individual trap receiver. If value of this object is set to invalid(3), then that particular entry is deemed invalid, meaning that the address for that entry is no longer valid because the entry has been removed from the table. | 1.3.6.1.4.1.298.1.1.5.2.1.2 | INTEGER {other(1), valid(2), invalid(3)} | read-write | mandatory |
| ipagentTrapRcvrComm OBJECT-TYPE Community string for traps sent to this trap receiver. | 1.3.6.1.4.1.298.1.1.5.2.1.3 | OCTET STRING | read-write | mandatory |
| adaptCard OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.2 | |||
| concentrator OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3 | |||
| concChassis OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.1 | |||
| concBasicGrp OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.1.1 | |||
| concChassisType OBJECT-TYPE The concentrator's chassis type. | 1.3.6.1.4.1.298.1.3.1.1.1 | INTEGER {other(1), aH1012(2)} | read-only | mandatory |
| concChassisBkplType OBJECT-TYPE The concentrator's chassis backplane type. | 1.3.6.1.4.1.298.1.3.1.1.2 | INTEGER {other(1), no-backplane(2)} | read-only | mandatory |
| concChassisBkplRev OBJECT-TYPE The concentrator's chassis backplane revision number. | 1.3.6.1.4.1.298.1.3.1.1.3 | INTEGER | read-only | mandatory |
| concChassisPsTable OBJECT-TYPE This table contains concentrator's power supply information. | 1.3.6.1.4.1.298.1.3.1.1.4 | not-accessible | mandatory | |
| concChassisPsEntry OBJECT-TYPE The entry in the table containing the information about a single power supply. | 1.3.6.1.4.1.298.1.3.1.1.4.1 | not-accessible | mandatory | |
| concChassisPsIndex OBJECT-TYPE The value of this object identifies the power supply table for which this entry contains power supply type and status. | 1.3.6.1.4.1.298.1.3.1.1.4.1.1 | INTEGER | read-only | mandatory |
| concChassisPsModuleType OBJECT-TYPE The value of this object identifies the power supply module type. | 1.3.6.1.4.1.298.1.3.1.1.4.1.2 | INTEGER {other(1)} | read-only | mandatory |
| concChassisPsStatus OBJECT-TYPE The value of this object identifies the power supply module status. | 1.3.6.1.4.1.298.1.3.1.1.4.1.3 | INTEGER {other(1), good(2), bad(3)} | read-only | mandatory |
| concChassisFanStatus OBJECT-TYPE The value of this object identifies the fan status. | 1.3.6.1.4.1.298.1.3.1.1.5 | INTEGER {other(1), no-fan(2), good(3), bad(4)} | read-only | mandatory |
| concChassisGroupCapacity OBJECT-TYPE The number of groups that can be contained within the concentrator. | 1.3.6.1.4.1.298.1.3.1.1.6 | INTEGER | read-only | mandatory |
| concChassisGroupMap OBJECT-TYPE This octet string represents the current configuration of groups, encoded as a bit string, each group is represented by a single bit. | 1.3.6.1.4.1.298.1.3.1.1.7 | OCTET STRING | read-only | mandatory |
| concChassisGrpTable OBJECT-TYPE A table that contains information about the group/slot in this chassis. | 1.3.6.1.4.1.298.1.3.1.1.8 | not-accessible | mandatory | |
| concChassisGrpEntry OBJECT-TYPE A list of information for each slot in this chassis. | 1.3.6.1.4.1.298.1.3.1.1.8.1 | not-accessible | mandatory | |
| concChassisGrpIndex OBJECT-TYPE The value of this object identifies the chassis group table for which this entry contains group related information. | 1.3.6.1.4.1.298.1.3.1.1.8.1.1 | INTEGER | read-only | mandatory |
| concChassisGrpNumberPort OBJECT-TYPE The number of port is available for up/down link within this group. | 1.3.6.1.4.1.298.1.3.1.1.8.1.2 | INTEGER | read-only | mandatory |
| concChassisGrpType OBJECT-TYPE The value represents the function of this group. | 1.3.6.1.4.1.298.1.3.1.1.8.1.3 | INTEGER | read-only | mandatory |
| concChassisGrpDescr OBJECT-TYPE A description of this group device. | 1.3.6.1.4.1.298.1.3.1.1.8.1.4 | DisplayString | read-only | mandatory |
| concChassisGrpHwRev OBJECT-TYPE The hardware revision number of this particular group. | 1.3.6.1.4.1.298.1.3.1.1.8.1.5 | INTEGER | read-only | mandatory |
| concConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.2 | |||
| eSmartHubConfig OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.2.1 | |||
| eSmartHubId OBJECT-TYPE Hub MAC address (octet string) found from prom chip in hub. | 1.3.6.1.4.1.298.1.3.2.1.1 | PhysAddress | read-only | mandatory |
| eSmartHubAssignedId OBJECT-TYPE Assigned hub ID for Out-of-Band. | 1.3.6.1.4.1.298.1.3.2.1.2 | INTEGER | read-only | mandatory |
| eSmartHubTerSwitch OBJECT-TYPE Status of position of PC/terminal switch located on rear panel of hub. Switches between serial and parallel communications for modem/PC or terminal connection to RS-232 Port. Up (off) for PC, down (on) for terminal. If position of switch is changed, there will be no change in this status until hub is reset. | 1.3.6.1.4.1.298.1.3.2.1.3 | INTEGER {other(1), terminal(2), pc-modem(3)} | read-only | mandatory |
| eSmartHubHwLoadPatStatus OBJECT-TYPE Which logic configuration pattern is loaded into the Programmable Logic Device PLD. | 1.3.6.1.4.1.298.1.3.2.1.4 | INTEGER | read-write | mandatory |
| eSmartHubHwLoadPatCapacity OBJECT-TYPE What kind of function the PLD can perform. | 1.3.6.1.4.1.298.1.3.2.1.5 | OCTET STRING | read-only | mandatory |
| eSmartHubNodeAgeTimer OBJECT-TYPE How long to keep node entry in node summary table, measured in sec. The maximum is 11 hours. | 1.3.6.1.4.1.298.1.3.2.1.6 | INTEGER | read-write | mandatory |
| eSmartHub3in1LnConStatus OBJECT-TYPE Status of 3In1 Uplink which is located on rear panel of hub. Describes the physical link type or types currently connected. | 1.3.6.1.4.1.298.1.3.2.1.7 | INTEGER {other(1), uTP(2), aUI(3), uTP-and-AUI(4)} | read-only | mandatory |
| eSmartHub3in1StateCtrl OBJECT-TYPE Whether using Auto-sense or manually selected a particular media type for the uplink connection. If using Auto-sense it first tries AUI. If AUI is not present then 10T. If neither AUI nor 10T is present, then it defaults to BNC. | 1.3.6.1.4.1.298.1.3.2.1.8 | INTEGER {other(1), uTP(2), bNC(3), aUI(4), auto(5)} | read-write | mandatory |
| concStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.3 | |||
| eStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.3.1 | |||
| eGlobalStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.3.1.1 | |||
| eGlobalHubReadableFrames OBJECT-TYPE Global counter of good or readable frames for this hub. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.1.1 | Counter | read-only | mandatory |
| eGlobalHubMcastFrames OBJECT-TYPE Global counter of number of multicast frames for this hub. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.1.2 | Counter | read-only | mandatory |
| eGlobalHubBcastFrames OBJECT-TYPE Global counter of number of broadcast frames for his hub. All 1s in network destination address. Multicast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.1.3 | Counter | read-only | mandatory |
| eGlobalHubFrameTooLongs OBJECT-TYPE Global counter, for this hub, of data frames longer than 1518 bytes, with a SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.1.4 | Counter | read-only | mandatory |
| eGlobalHubRunts OBJECT-TYPE Global counter, for this hub, of data frames with size less than 64 bytes, with no CRC or alignment errors. | 1.3.6.1.4.1.298.1.3.3.1.1.5 | Counter | read-only | mandatory |
| eGlobalHubAlignmentErrors OBJECT-TYPE Global counter, for this hub, of frames which are not integer multiples of 1 byte. | 1.3.6.1.4.1.298.1.3.3.1.1.6 | Counter | read-only | mandatory |
| eGlobalHubFragmentErrors OBJECT-TYPE Global counter, for this hub, of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). | 1.3.6.1.4.1.298.1.3.3.1.1.7 | Counter | read-only | mandatory |
| eGlobalHubFCSErrors OBJECT-TYPE Global counter, for this hub, of frames that failed Cyclic Redundancy Check (CRC). | 1.3.6.1.4.1.298.1.3.3.1.1.8 | Counter | read-only | mandatory |
| eGlobalHubIFGErrors OBJECT-TYPE Global counter, for this hub, of occurrences of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. | 1.3.6.1.4.1.298.1.3.3.1.1.9 | Counter | read-only | mandatory |
| eGlobalHubDataRateMismatchs OBJECT-TYPE Global counter, for this hub, of errors where incoming data rate is not with in the tolerance level of 10MHZ + or - 0.01%. | 1.3.6.1.4.1.298.1.3.3.1.1.10 | Counter | read-only | mandatory |
| eGlobalHubShortEvents OBJECT-TYPE Global counter, for this hub, of data burst where data is less than 10 bytes in length, with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.1.11 | Counter | read-only | mandatory |
| eGlobalHubCollisions OBJECT-TYPE Global counter of collision flags, for this hub. | 1.3.6.1.4.1.298.1.3.3.1.1.12 | Counter | read-only | mandatory |
| eGlobalHubLateCollisions OBJECT-TYPE Global counter, for this hub, of collisions occurring after the 64 byte collision window. | 1.3.6.1.4.1.298.1.3.3.1.1.13 | Counter | read-only | mandatory |
| eGlobalHubMJLPs OBJECT-TYPE Global counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. | 1.3.6.1.4.1.298.1.3.3.1.1.14 | Counter | read-only | mandatory |
| eGlobalHubAutoPartitions OBJECT-TYPE Global counter, for this hub, of all ports including 3in1 port being partitioned from network in response to 31 or more continuous collisions. | 1.3.6.1.4.1.298.1.3.3.1.1.15 | Counter | read-only | mandatory |
| eGlobalHubSFDMissings OBJECT-TYPE Global counter, for this hub, of a burst of data greater than or equal to 10 bytes in length with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.1.16 | Counter | read-only | mandatory |
| eGlobalHubBadFrames OBJECT-TYPE Global counter, for this hub, of total errored frame including toolong, runts, misaligned, or bad FCS. | 1.3.6.1.4.1.298.1.3.3.1.1.17 | Counter | read-only | mandatory |
| eGrpStatisticsTable OBJECT-TYPE Table of statistical information for each group. | 1.3.6.1.4.1.298.1.3.3.1.3 | not-accessible | mandatory | |
| eGrpStatisticsEntry OBJECT-TYPE Entry for individual group in table. | 1.3.6.1.4.1.298.1.3.3.1.3.1 | not-accessible | mandatory | |
| eGrpStatIndex OBJECT-TYPE The value of this object identifies the group for which this entry contains group statistical information. | 1.3.6.1.4.1.298.1.3.3.1.3.1.1 | INTEGER | read-only | mandatory |
| eGrpStatReadableFrames OBJECT-TYPE Group counter of 'good' or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.3.1.2 | Counter | read-only | mandatory |
| eGrpStatMcastFrames OBJECT-TYPE Group counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.3.1.3 | Counter | read-only | mandatory |
| eGrpStatBcastFrames OBJECT-TYPE Group counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.3.1.4 | Counter | read-only | mandatory |
| eGrpStatFrameTooLongs OBJECT-TYPE Group counter for data frames longer than 1518 bytes, with a SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.3.1.5 | Counter | read-only | mandatory |
| eGrpStatRunts OBJECT-TYPE Group counter for data frames with size less than 64 bytes, with no CRC or alignment errors. | 1.3.6.1.4.1.298.1.3.3.1.3.1.6 | Counter | read-only | mandatory |
| eGrpStatAlignmentErrors OBJECT-TYPE Group counter of frames which are not integer multiples of 1 byte . | 1.3.6.1.4.1.298.1.3.3.1.3.1.7 | Counter | read-only | mandatory |
| eGrpStatFragmentErrors OBJECT-TYPE Group counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). | 1.3.6.1.4.1.298.1.3.3.1.3.1.8 | Counter | read-only | mandatory |
| eGrpStatFCSErrors OBJECT-TYPE Group counter frames that failed Cyclic Redundancy Check (CRC). | 1.3.6.1.4.1.298.1.3.3.1.3.1.9 | Counter | read-only | mandatory |
| eGrpStatIFGErrors OBJECT-TYPE Group counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. | 1.3.6.1.4.1.298.1.3.3.1.3.1.10 | Counter | read-only | mandatory |
| eGrpStatDataRateMismatchs OBJECT-TYPE Group counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%. | 1.3.6.1.4.1.298.1.3.3.1.3.1.11 | Counter | read-only | mandatory |
| eGrpStatShortEvents OBJECT-TYPE Group counter of data burst where data is less than 10 bytes in length, with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.3.1.12 | Counter | read-only | mandatory |
| eGrpStatCollisions OBJECT-TYPE Group counter of collision flags. | 1.3.6.1.4.1.298.1.3.3.1.3.1.13 | Counter | read-only | mandatory |
| eGrpStatLateCollisions OBJECT-TYPE Group counter of collisions occurring after the 64 byte collision window. | 1.3.6.1.4.1.298.1.3.3.1.3.1.14 | Counter | read-only | mandatory |
| eGrpStatMJLPs OBJECT-TYPE Group counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. | 1.3.6.1.4.1.298.1.3.3.1.3.1.15 | Counter | read-only | mandatory |
| eGrpStatAutoPartitions OBJECT-TYPE Group counter of ports in group autopartitioned in response to 31 or more continuous collisions. | 1.3.6.1.4.1.298.1.3.3.1.3.1.16 | Counter | read-only | mandatory |
| eGrpStatSFDMissings OBJECT-TYPE Group counter of a burst of data greater than or equal to 10 bytes in length with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.3.1.17 | Counter | read-only | mandatory |
| eGrpStatBadFrames OBJECT-TYPE Group counter of total errored frames including toolong, runts, misaligned, or bad FCS. | 1.3.6.1.4.1.298.1.3.3.1.3.1.18 | Counter | read-only | mandatory |
| ePortStatisticsTable OBJECT-TYPE Table for port specific network statistics. | 1.3.6.1.4.1.298.1.3.3.1.4 | not-accessible | mandatory | |
| ePortStatisticsEntry OBJECT-TYPE Entry for individual port in table. | 1.3.6.1.4.1.298.1.3.3.1.4.1 | not-accessible | mandatory | |
| ePortGrpIndex OBJECT-TYPE The value of this object identifies the group for which this entry contains port statistical information. | 1.3.6.1.4.1.298.1.3.3.1.4.1.1 | INTEGER | read-only | mandatory |
| ePortIndex OBJECT-TYPE The value of this object identifies the port for which this entry contains port statistical information. | 1.3.6.1.4.1.298.1.3.3.1.4.1.2 | INTEGER | read-only | mandatory |
| ePortStatReadableFrames OBJECT-TYPE Port counter of good or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.4.1.3 | Counter | read-only | mandatory |
| ePortStatMcastFrames OBJECT-TYPE Port counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.4.1.4 | Counter | read-only | mandatory |
| ePortStatBcastFrames OBJECT-TYPE Port counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.4.1.5 | Counter | read-only | mandatory |
| ePortStatFrameTooLongs OBJECT-TYPE Port counter for data frames longer than 1518 bytes, with a SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.4.1.6 | Counter | read-only | mandatory |
| ePortStatRunts OBJECT-TYPE Port counter for data frames with size less than 64 bytes, with no CRC or alignment errors. | 1.3.6.1.4.1.298.1.3.3.1.4.1.7 | Counter | read-only | mandatory |
| ePortStatAlignmentErrors OBJECT-TYPE Port counter of frames which are not integer multiples of 1 byte. | 1.3.6.1.4.1.298.1.3.3.1.4.1.8 | Counter | read-only | mandatory |
| ePortStatFragmentErrors OBJECT-TYPE Port counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). | 1.3.6.1.4.1.298.1.3.3.1.4.1.9 | Counter | read-only | mandatory |
| ePortStatFCSErrors OBJECT-TYPE Port counter of frames that failed Cyclic Redundancy Check (CRC). | 1.3.6.1.4.1.298.1.3.3.1.4.1.10 | Counter | read-only | mandatory |
| ePortStatIFGErrors OBJECT-TYPE Port counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. | 1.3.6.1.4.1.298.1.3.3.1.4.1.11 | Counter | read-only | mandatory |
| ePortStatDataRateMismatchs OBJECT-TYPE Port counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%. | 1.3.6.1.4.1.298.1.3.3.1.4.1.12 | Counter | read-only | mandatory |
| ePortStatShortEvents OBJECT-TYPE Port counter of data burst where data is less than 10 bytes in length, with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.4.1.13 | Counter | read-only | mandatory |
| ePortStatCollisions OBJECT-TYPE Port counter of collision flags. | 1.3.6.1.4.1.298.1.3.3.1.4.1.14 | Counter | read-only | mandatory |
| ePortStatLateCollisions OBJECT-TYPE Port counter of collisions occurring after the 64 byte collision window. | 1.3.6.1.4.1.298.1.3.3.1.4.1.15 | Counter | read-only | mandatory |
| ePortStatMJLPs OBJECT-TYPE Port counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. | 1.3.6.1.4.1.298.1.3.3.1.4.1.16 | Counter | read-only | mandatory |
| ePortStatAutoPartitions OBJECT-TYPE Port counter of number of times port was autopartitioned in response to 31 or more continuous collisions. | 1.3.6.1.4.1.298.1.3.3.1.4.1.17 | Counter | read-only | mandatory |
| ePortStatSFDMissings OBJECT-TYPE Port counter of a burst of data greater than or equal to 10 bytes in length with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.4.1.18 | Counter | read-only | mandatory |
| ePortStatBadFrames OBJECT-TYPE Port counter of total errored frames including toolong, runts, misaligned, or bad FCS. | 1.3.6.1.4.1.298.1.3.3.1.4.1.19 | Counter | read-only | mandatory |
| eTrafficMatrixTable OBJECT-TYPE Table to analyze the number of packets received through network traffic by the size of each packet. | 1.3.6.1.4.1.298.1.3.3.1.5 | not-accessible | mandatory | |
| eTrafficMatrixEntry OBJECT-TYPE Individual entry in matrix of packet lengths table. | 1.3.6.1.4.1.298.1.3.3.1.5.1 | not-accessible | mandatory | |
| eTrafficMatrixLength OBJECT-TYPE Starting length for each range in table. | 1.3.6.1.4.1.298.1.3.3.1.5.1.1 | INTEGER | read-only | mandatory |
| eTrafficMatrixRange OBJECT-TYPE Range of packet sizes to be scanned for in network traffic. | 1.3.6.1.4.1.298.1.3.3.1.5.1.2 | INTEGER {other(1), from-1-to-63-bytes(2), from-64-to-127-bytes(3), from-128-to-255-bytes(4), from-256-to-511-bytes(5), from-512-to-767-bytes(6), from-768-to-1023-bytes(7), from-1024-to-1518-bytes(8), from-512-to-1023-bytes(9), from-65-to-511-bytes(10), exact-64-bytes(11), over-1518-bytes(12)} | read-only | mandatory |
| eTrafficMatrixFramesCounts OBJECT-TYPE Counter for number of frames received for particular range specified by the MatrixRange. | 1.3.6.1.4.1.298.1.3.3.1.5.1.3 | Counter | read-only | mandatory |
| eSpecific OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.3.1.6 | |||
| eSmartHubSpec OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.3.1.6.1 | |||
| eColGraphBar OBJECT-TYPE Information on hardware LED collision graph bar. | 1.3.6.1.4.1.298.1.3.3.1.6.1.1 | INTEGER | read-only | mandatory |
| eUtilGraphBar OBJECT-TYPE Information on hardware LED for utilization graph bar. | 1.3.6.1.4.1.298.1.3.3.1.6.1.2 | INTEGER | read-only | mandatory |
| ePortRateTable OBJECT-TYPE Network statistics for individual ports measured in Rate/Second. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6 | not-accessible | optional | |
| ePortRateEntry OBJECT-TYPE Individual entry in port rate table. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1 | not-accessible | optional | |
| ePortRateGrpIndex OBJECT-TYPE The value of this object identifies the group for which this entry contains port statistical information. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.1 | INTEGER | read-only | optional |
| ePortRatePortIndex OBJECT-TYPE This value identifies the port for which this entry contains port statistical information. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.2 | INTEGER | read-only | optional |
| ePortRateReadableFrames OBJECT-TYPE Rate of occurrence of good or readable frames. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.3 | INTEGER | read-only | optional |
| ePortRateMcastFrames OBJECT-TYPE Rate of occurrence of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.4 | INTEGER | read-only | optional |
| ePortRateBcastFrames OBJECT-TYPE Rate of occurrence of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.5 | INTEGER | read-only | optional |
| ePortRateFrameTooLongs OBJECT-TYPE Rate of occurrence of data frames longer than 1518 bytes, with a SFD and good FCS. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.6 | INTEGER | read-only | optional |
| ePortRateRunts OBJECT-TYPE Rate of occurrence of data frames with size less than 64 bytes, with no CRC or alignment errors. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.7 | INTEGER | read-only | optional |
| ePortRateAlignmentErrors OBJECT-TYPE Rate of occurrence of frames which are not integer multiples of 1 byte. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.8 | INTEGER | read-only | optional |
| ePortRateFragmentErrors OBJECT-TYPE Rate of occurrence of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.9 | INTEGER | read-only | optional |
| ePortRateFCSErrors OBJECT-TYPE Rate of occurrence of frames that failed Cyclic Redundancy Check (CRC). | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.10 | INTEGER | read-only | optional |
| ePortRateIFGErrors OBJECT-TYPE Rate of occurrence of interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.11 | INTEGER | read-only | optional |
| ePortRateDataRateMismatch OBJECT-TYPE Rate of occurrence of errors where incoming data rate is not with in the tolerance level of 10 MHz + or - 0.01%. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.12 | INTEGER | read-only | optional |
| ePortRateShortEvents OBJECT-TYPE Rate of occurrence of data burst where data is less than 10 bytes in length, with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.13 | INTEGER | read-only | optional |
| ePortRateCollisions OBJECT-TYPE Rate of occurrence of collision flags. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.14 | INTEGER | read-only | optional |
| ePortRateLateCollisions OBJECT-TYPE Rate of occurrence of collisions occurring after the 64 byte collision window. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.15 | INTEGER | read-only | optional |
| ePortRateMJLPs OBJECT-TYPE Rate of occurrence of MAU jabber lockup protection where hub repeater chip goes into lockup state. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.16 | INTEGER | read-only | optional |
| ePortRateAutoPartitions OBJECT-TYPE Rate of occurrence of times port was autopartitioned in response to 31 or more continuous collisions. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.17 | INTEGER | read-only | optional |
| ePortRateSFDMissings OBJECT-TYPE Rate of occurrence of a burst of data greater than or equal to 10 bytes in length with no SFD. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.18 | INTEGER | read-only | optional |
| ePortRateBadFrames OBJECT-TYPE Rate of occurrence of total errored frames including toolong, runts, misaligned, or bad FCS. | 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.19 | INTEGER | read-only | optional |
| concStateCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.4 | |||
| eStateCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.4.1 | |||
| ePortStateCtrlTable OBJECT-TYPE Table for port control parameters. | 1.3.6.1.4.1.298.1.3.4.1.1 | not-accessible | mandatory | |
| ePortStateCtrlEntry OBJECT-TYPE Individual entry of port control in table. | 1.3.6.1.4.1.298.1.3.4.1.1.1 | not-accessible | mandatory | |
| ePortStateGrpIndex OBJECT-TYPE The value of this object identifies the group for which this entry contains port control information. | 1.3.6.1.4.1.298.1.3.4.1.1.1.1 | INTEGER | read-only | mandatory |
| ePortStatePortIndex OBJECT-TYPE This value identifies the port for which this entry contains port control information. | 1.3.6.1.4.1.298.1.3.4.1.1.1.2 | INTEGER | read-only | mandatory |
| ePortStateType OBJECT-TYPE Type of cabling physically connected to port. | 1.3.6.1.4.1.298.1.3.4.1.1.1.3 | INTEGER {other(1), bNC(2), aUI(3), rJ45(4), foil(5), three-in-one(6)} | read-only | mandatory |
| ePortStateLinkStatus OBJECT-TYPE Link status for particular port. On=physical link if link test enabled. Off=no physical link exists or link test is disabled. | 1.3.6.1.4.1.298.1.3.4.1.1.1.4 | INTEGER {others(1), linkon(2), linkoff(3)} | read-only | mandatory |
| ePortStateLinkIntegTest OBJECT-TYPE Set can enable or disabled link integrity test. Get will say if link integrity test is enabled (2) or disabled (3). | 1.3.6.1.4.1.298.1.3.4.1.1.1.5 | INTEGER {others(1), linkTestEnable(2), linkTestDisable(3)} | read-write | mandatory |
| ePortStateAutoPartStatus OBJECT-TYPE Whether port has been autopartitioned (2) or not autopartitioned (3). | 1.3.6.1.4.1.298.1.3.4.1.1.1.6 | INTEGER {others(1), autopartitioned(2), notautopartitioned(3)} | read-only | mandatory |
| ePortStateJabberStatus OBJECT-TYPE Jabber detection for port. If On(2), then jabber occurred on this port. Off(3), then no jabber occurred or jabber detection has been manually disabled. | 1.3.6.1.4.1.298.1.3.4.1.1.1.7 | INTEGER {others(1), on(2), off(3)} | read-only | mandatory |
| ePortStateJabberState OBJECT-TYPE Set can enable or disable jabber detection test. Get will say if jabber detection test is enabled (2) or disabled (3). | 1.3.6.1.4.1.298.1.3.4.1.1.1.8 | INTEGER {others(1), enabled(2), disabled(3)} | read-write | mandatory |
| ePortStateAdminState OBJECT-TYPE Set will manually enable or disable any port. Get will say if port has been enabled (2) or disabled (3). | 1.3.6.1.4.1.298.1.3.4.1.1.1.9 | INTEGER {others(1), enabled(2), disabled(3)} | read-write | mandatory |
| ePortStateRDTState OBJECT-TYPE Whether RecvThreshold has been enabled or disabled. Can use this to lower noise threshold (tolerance) so that longer twisted pair links can be used. | 1.3.6.1.4.1.298.1.3.4.1.1.1.10 | INTEGER {others(1), unreduce(2), reduce(3)} | read-write | mandatory |
| ePortStatePolarityStatus OBJECT-TYPE Polarity is correct (2) or not for this port. | 1.3.6.1.4.1.298.1.3.4.1.1.1.11 | INTEGER {others(1), normal(2), reversed(3)} | read-only | mandatory |
| ePortStatePolarityState OBJECT-TYPE Autopolarity correction enabled or disabled. Allows hub to make electrical corrections automatically if cable does not reverse polarity within wire pairs. If do not want this correction to take place, autocorrection can be disabled. | 1.3.6.1.4.1.298.1.3.4.1.1.1.12 | INTEGER {others(1), enabled(2), disabled(3)} | read-write | mandatory |
| concNodeMgt OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.5 | |||
| nodeSummaryTable OBJECT-TYPE Node summary of all traffic through hub. | 1.3.6.1.4.1.298.1.3.5.1 | not-accessible | mandatory | |
| nodeSummaryEntry OBJECT-TYPE Individual entry in node summary table. | 1.3.6.1.4.1.298.1.3.5.1.1 | not-accessible | mandatory | |
| nodeSummaryGrpIndex OBJECT-TYPE Group Id for identifying the group where node activity is detected. | 1.3.6.1.4.1.298.1.3.5.1.1.1 | INTEGER | read-only | mandatory |
| nodeSummaryPortIndex OBJECT-TYPE Port Id for identifying the port where node activity is detected. | 1.3.6.1.4.1.298.1.3.5.1.1.2 | INTEGER | read-only | mandatory |
| nodeSummarySrcMacAddr OBJECT-TYPE The source MAC address of the node that is transmitting frames received by this port. | 1.3.6.1.4.1.298.1.3.5.1.1.3 | PhysAddress | read-only | mandatory |
| nodeSummaryDestMacAddr OBJECT-TYPE The destination MAC address of the node to which frames are being received by this port. | 1.3.6.1.4.1.298.1.3.5.1.1.4 | PhysAddress | read-only | mandatory |
| nodeSummaryEtherType OBJECT-TYPE The 2 bytes after the source (src) address in packet. | 1.3.6.1.4.1.298.1.3.5.1.1.5 | INTEGER | read-only | mandatory |
| nodeSummaryIpAddrPair OBJECT-TYPE Destination and source IP address if packet is an Ethernet IP packet. It the packet is not an Ethernet IP packet, then the information may not be accurate. | 1.3.6.1.4.1.298.1.3.5.1.1.6 | OCTET STRING | read-only | mandatory |
| nodeSummaryTimeStamp OBJECT-TYPE nodeSummary entry time stamp (in hundredths of a second) since the network management portion of the system was last re-initialized. | 1.3.6.1.4.1.298.1.3.5.1.1.7 | TimeTicks | read-only | mandatory |
| nodeSecurity OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.5.2 | |||
| nodeSecuLev1Table OBJECT-TYPE Table of nodes which have access to particular ports. Nodes are identified by MAC address. | 1.3.6.1.4.1.298.1.3.5.2.1 | not-accessible | mandatory | |
| nodeSecuLev1Entry OBJECT-TYPE Individual entry for node security table. | 1.3.6.1.4.1.298.1.3.5.2.1.1 | not-accessible | mandatory | |
| nodeSecuLev1GrpIndex OBJECT-TYPE Group ID for port which verifying node access. | 1.3.6.1.4.1.298.1.3.5.2.1.1.1 | INTEGER | read-only | mandatory |
| nodeSecuLev1PortIndex OBJECT-TYPE Specific port for which verifying node access. | 1.3.6.1.4.1.298.1.3.5.2.1.1.2 | INTEGER | read-only | mandatory |
| nodeSecuLev1Status OBJECT-TYPE Address is valid or invalid. | 1.3.6.1.4.1.298.1.3.5.2.1.1.3 | INTEGER {other(1), valid(2), invalid(3)} | read-write | mandatory |
| nodeSecuLev1AllowedAddr OBJECT-TYPE MAC address of nodes allowed for particular port. | 1.3.6.1.4.1.298.1.3.5.2.1.1.4 | PhysAddress | read-write | mandatory |
| nodeSecuLev1Action OBJECT-TYPE Set action for node intrusion violation. | 1.3.6.1.4.1.298.1.3.5.2.1.1.5 | INTEGER {other(1), partition-port(2), send-trap(3), partition-port-and-send-trap(4), send-trap-and-request-page(5), partition-port-and-send-trap-and-request-page(6)} | read-write | mandatory |
| concAlarmMgt OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.6 | |||
| thresholdAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.298.1.3.6.1 | |||
| thresholdLev1Table OBJECT-TYPE Threshold/trap table. | 1.3.6.1.4.1.298.1.3.6.1.1 | not-accessible | optional | |
| thresholdLev1Entry OBJECT-TYPE Individual entry in threshold trap table. | 1.3.6.1.4.1.298.1.3.6.1.1.1 | not-accessible | optional | |
| thresholdLev1Index OBJECT-TYPE An index that uniquely identifies an entry in the alarm table. | 1.3.6.1.4.1.298.1.3.6.1.1.1.1 | INTEGER | read-only | optional |
| thresholdLev1Status OBJECT-TYPE Status of entry in threshold/trap table. | 1.3.6.1.4.1.298.1.3.6.1.1.1.2 | INTEGER {other(1), valid(2), invalid(3)} | read-write | optional |
| thresholdLev1Target OBJECT-TYPE Set target for threshold definition. Either whole hub(2) or particular port (3). | 1.3.6.1.4.1.298.1.3.6.1.1.1.3 | INTEGER {other(1), hub(2), port(3)} | read-write | optional |
| thresholdLev1GroupIndex OBJECT-TYPE Group ID for trap set. One note--if the target is selected as hub, the group index will be ignored. | 1.3.6.1.4.1.298.1.3.6.1.1.1.4 | INTEGER | read-write | optional |
| thresholdLev1PortIndex OBJECT-TYPE Port number for trap set. One note--if the target is selected as hub, the port index will be ignored. | 1.3.6.1.4.1.298.1.3.6.1.1.1.5 | INTEGER | read-write | optional |
| thresholdLev1Subject OBJECT-TYPE Variable checking for in trap. These are the type of frames that a trap will be verified against. | 1.3.6.1.4.1.298.1.3.6.1.1.1.6 | INTEGER {other(1), readable-frames(2), mcast-frames(3), bcast-frames(4), frame-too-longs(5), runts(6), alignment-errors(7), fragment-errors(8), fCS-errors(9), iFG-errors(10), data-rate-mismatch(11), short-events(12), collisions(13), late-collisions(14), auto-partitions(15), sfd-missing(16), bad-frames(17)} | read-write | optional |
| thresholdLev1SampleType OBJECT-TYPE The method of sampling the selected variable and calculating the value to be compared against the threshold. | 1.3.6.1.4.1.298.1.3.6.1.1.1.7 | INTEGER {other(1), event-per-second(2)} | read-write | optional |
| thresholdLev1StartupAlarm OBJECT-TYPE When the trap is triggered in relation to value set. When goes above (2), below (3), or changes at all from (4). | 1.3.6.1.4.1.298.1.3.6.1.1.1.8 | INTEGER {other(1), rising(2), falling(3), rising-or-falling(4)} | read-write | optional |
| thresholdLev1WaterMark OBJECT-TYPE Counter of threshold. | 1.3.6.1.4.1.298.1.3.6.1.1.1.9 | INTEGER | read-write | optional |
| thresholdLev1DetectedValue OBJECT-TYPE The value of the statistic for the last sampling period. | 1.3.6.1.4.1.298.1.3.6.1.1.1.10 | INTEGER | read-only | optional |
| thresholdLev1RisingEvent OBJECT-TYPE How to respond to a triggered event for a rising event. | 1.3.6.1.4.1.298.1.3.6.1.1.1.11 | INTEGER {other(1), partition-port(2), send-trap(3), partition-port-and-send-trap(4), send-trap-and-request-page(5), partition-port-and-send-trap-and-request-page(6)} | read-write | optional |
| thresholdLev1FallingEvent OBJECT-TYPE How to respond to a triggered event for a falling event. | 1.3.6.1.4.1.298.1.3.6.1.1.1.12 | INTEGER {other(1), partition-port(2), send-trap(3), partition-port-and-send-trap(4), send-trap-and-request-page(5), partition-port-and-send-trap-and-request-page(6)} | read-write | optional |
| thresholdLev1Interval OBJECT-TYPE The interval in seconds over which the data is sampled. | 1.3.6.1.4.1.298.1.3.6.1.1.1.13 | INTEGER | read-write | optional |
| thresholdLev1OwnerString OBJECT-TYPE 8-byte octet reserved for the owner who defined this entry. | 1.3.6.1.4.1.298.1.3.6.1.1.1.14 | OCTET STRING (SIZE(8)) | read-write | optional |
| productId OBJECT-IDENTITY | 1.3.6.1.4.1.298.2 | |||
| adapterProductId OBJECT-IDENTITY | 1.3.6.1.4.1.298.2.1 | |||
| concProductId OBJECT-IDENTITY | 1.3.6.1.4.1.298.2.2 | |||
| hub1012 OBJECT-IDENTITY | 1.3.6.1.4.1.298.2.2.1 | |||
| hub1012_bridge OBJECT-IDENTITY | 1.3.6.1.4.1.298.2.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| thresholdLev1 NOTIFICATION-TYPE The SNMP trap that is generated when an alarm entry crosses its rising threshold or falling threshold, and generates an event that is configured for sending SNMP traps. | 1.3.6.1.4.1.298.2.2.1.0.1 | |
| nodeSecuLevel1 NOTIFICATION-TYPE The SNMP trap that is generated when the MAC layer address of the incoming frame from a particular port does not match the pre-assigned address with that port, and generates an event that is configured for sending SNMP traps. | 1.3.6.1.4.1.298.2.2.1.0.2 |