MIBs Depot

ASAM-EQUIP-MIB

Registered at
1.3.6.1.4.1.637.61.1.23
Namespace
nokia
Source file
ASAM-EQUIP-MIB
Digest
sha256:24f491313da8e553c03b469850bf8ed0732c18a912e9cac875b642341ca95fcb

Imports

FromSymbols
ASAM-ALARM-MIBAsamAlarmSeverityType
ASAM-TC-MIBAsamNextProfileIndex, AsamProfileIndex, AsamProfileName, AsamProfilePointer, AsamProfileRefCount, NetworkTimeInSeconds
ITF-MIBInterfaceIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
SYSTEM-MIBasam

Imported by

3 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ASAM-ALARM-MIB
ASAM-EQUIP-MIB
ASAM-TC-MIB
IANAifType-MIB
IF-MIB
ITF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
SYSTEM-MIB

Textual conventions

NameOIDSyntaxAccessStatus
EqptCustAlarmProfileOutputType
type
EqptCustAlarmProfilePolarityType
type
EqptHolderIndex
type
EqptHolderIndexOrZero
type
EqptPortMappingIndex
type
EqptPowerRftcIndex
type
EqptPowerRftcLineStatus
type
EqptPowerSupplyIndex
type
EqptSlotIndex
type

Objects

NameOIDSyntaxAccessStatus
asamEquipmentMIB
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23
eqptAsam
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.1
eqptAsamId
OBJECT-TYPE
Unique identifier of the system. In practice, this attribute contains the serial number of the most recently equipped SMAS board within the main shelf. Notice however that there are also shelves in which the SMAS is replaced by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which the serial number of the ACU is taken. This attribute is used internally by the system in case both NTs start-up simultaneously to determine whether either the database on NT-A or the database on NT-B should be used as the systems database. It's not the intention to make this attribute visible to an operator. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: '' UNITS: -
1.3.6.1.4.1.637.61.1.23.1.1DisplayStringread-onlymandatory
eqptAsamRestart
OBJECT-TYPE
This attribute is used to restart the system. The persistent data is preserved. Contains previous restart reason, if not available it contains value 255. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: initialValue (255) UNITS: -
1.3.6.1.4.1.637.61.1.23.1.2INTEGER {restartWithSelfTest(1), restartWithoutSelfTest(2), restartHot(5), initialValue(255)}read-writemandatory
eqptMaxRacksPerAsam
OBJECT-TYPE
This object is initialized by the system and specifies the maximum number of racks supported by the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..7 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.1.3INTEGERread-onlymandatory
eqptMaxShelvesPerRack
OBJECT-TYPE
This object is initialized by the system and specifies the maximum number of shelves which can be equipped within one rack. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.1.4INTEGERread-onlymandatory
eqptMaxSlotsPerShelf
OBJECT-TYPE
This object is initialized by the system and specifies the maximum number of regular slots supported by one shelf. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..22 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.1.5INTEGERread-onlymandatory
eqptHwNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the number of configuration or status changes in the Equipment MIB objects. This counter is incremented each time any of the summary table objects change. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.1.6Counterread-onlymandatory
eqptProtNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the overall number of status changes in the equipment protection MIB objects. This counter is incremented each time any of the eqptProtGroupNumberOfChanges counters is incremented. ALCATEL NOTE: SUPPORT:YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.1.7Counterread-onlymandatory
eqptRestartNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the overall number of status changes in the eqptBoardRestartNumberOfChanges objects in eqptBoardTable. This counter is incremented each time any of the eqptBoardRestartNumberOfChanges counters is incremented. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.1.8Counterread-onlymandatory
eqptFanMode
OBJECT-TYPE
Parameter indicates the actually applied FAN tray mode: 'default': the fan packs run in average mode, predefined thermal margins are used for defining/adapting the fan speeds 'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal thermal margins wrt default settings 'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt default settings 'classic': fixed speed settings apply wrt the fan - no SW control ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.1.9INTEGER {default(0), eco(1), protect(2), classic(3)}read-writemandatory
eqptHolderTable
OBJECT-TYPE
Equipment holder table, representing the system, the racks and the shelves. This table contains one row for the system, one row per rack, and one row per shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.2not-accessiblemandatory
eqptHolderEntry
OBJECT-TYPE
An entry of the equipment holder table. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.2.1not-accessiblemandatory
eqptHolderId
OBJECT-TYPE
Index in equipment holder Table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.1EqptHolderIndexnot-accessiblemandatory
eqptHolderClass
OBJECT-TYPE
Classification of shelves. This object has no meaning for the system and the rack equipment holders. Note: for ISAM, only the values mainEthernet (4) and extEthernet (5) are allowed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1..5 PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.2INTEGER {mainIqHcl(1), extIq(2), extHcl(3), mainEthernet(4), extEthernet(5)}read-writemandatory
eqptHolderPlannedType
OBJECT-TYPE
A string representing the planned type of equipment holder. If the equipment holder is planned, the string consists of a mnemonic, identifying the holder type. This object is only writable for the entries that represent a shelf. Other entries get a value corresponding to the detected equipment practice type. Following values are valid: System-types: ============= LAUS Large ASAM US market (6 racks, 3 shelves per rack) LAEU Large ASAM EU market (6 racks, 3 shelves per rack) LEEU Large ESAM EU market (7 racks, 4 shelves per rack) LEUS Large ESAM US market (7 racks, 4 shelves per rack) LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves per rack) LEWW Large ESAM World Wide (7 racks, 4 shelves per rack) LNWW Large ESAM World Wide (7 racks, 4 shelves per rack) Rack-types: =========== ALTR-A ADSL Line Termination Rack version A (US) ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm) Shelf-types: ============ <SHELF_MNEMONIC> A shelf of a specific type. Refer to the ETSI Configurations and US Configurations documents for the list of shelf types that are supported in a given system release. NOT_PLANNED The shelf is not planned. NOT_ALLOWED Shelf planning is not allowed in this position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: See above PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.3DisplayStringread-writemandatory
eqptHolderActualType
OBJECT-TYPE
A string representing the actual equipment holder type. Following values are possible: <HOLDER_MNEMONIC> Indicates the detected equipment holder-type. Uses same mnemonics as described in object eqptHolderPlannedType. EMPTY Equipment holder is not detected UNKNOWN The type of the detected holder is unknown. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.4DisplayStringread-onlymandatory
eqptHolderAdminStatus
OBJECT-TYPE
Used by the administrator to lock or unlock an equipment holder. This attribute is only supported for shelves. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.5INTEGER {unlock(1), lock(2)}read-writemandatory
eqptHolderOperStatus
OBJECT-TYPE
This attribute identifies whether or not the equipment holder is capable of performing its normal functions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.6INTEGER {enabled(1), disabled(2)}read-onlymandatory
eqptHolderOperError
OBJECT-TYPE
This attribute describes for what reason the equipment holder is not operational. These values correspond with the alarms that are generated in case of a failure. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4, 15 PERSIST: NO DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.7INTEGER {no-error(1), type-mismatch(2), holder-missing(3), holder-installation-missing(4), defense(15)}read-onlymandatory
eqptHolderAvailStatus
OBJECT-TYPE
This attribute indicates whether the equipment holder is available or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.8INTEGER {available(1), failed(3), notInstalled(5), offLine(6)}read-onlymandatory
eqptHolderDescription
OBJECT-TYPE
Text-field, which can for instance be used to describe the location of the equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: '' UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.9DisplayString (SIZE(0..127))read-writemandatory
eqptHolderContainerId
OBJECT-TYPE
This attribute describes in which equipment holder the equipment holder is contained. This object is only meaningful for racks and shelves, since the system itself has no containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.10INTEGERread-onlymandatory
eqptHolderContainerOffset
OBJECT-TYPE
This attribute describes the position of the equipment holder in the containing equipment holder. This object is only meaningful for racks and shelves, since the system itself has no containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.11INTEGERread-onlymandatory
eqptHolderMode
OBJECT-TYPE
This attribute identifies the holder mode and is used by both the NEP shelf and the ARAM-E shelf: ntbntio-supported: this mode works in the same manner as iSAM XD. The LSM can only be used on LSM slot. NT in NTB is supported. NTIO is also supported. ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as LT slot. So, two more LSM can be supported in this mode. Therefore, NTIO/NTB board is not supported. ntb-unsupported: In this mode, NTB slot can be used as LT slot. So one more LT can be supported in this mode. Therefore, NTB board will not be supported. This mode is applicable for NFXS-B shelf only. ntio-unsupported: In this mode, there is no NTIO; the slot can be used for an LSM. DEFAULTVALUE: The default Value of the eqptHolderMode depends on the shelf type. In the case of ARAM-E, default will be ntio-unsupported. All other shelves will default to ntbntio-supported mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: Yes DEFVALUE: See above UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.12INTEGER {ntbntio-supported(1), ntbntio-unsupported(2), ntb-unsupported(3), ntbntioextlt-unsupported(4), ntio-unsupported(6), ngpon-supported(7), gpon-supported(8), ngpon-port-reduced(9)}read-writemandatory
eqptHolderSerialNumber
OBJECT-TYPE
This attribute represents the serial number of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.13DisplayStringread-onlymandatory
eqptHolderVariant
OBJECT-TYPE
This attribute represents the ALU code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.14DisplayStringread-onlymandatory
eqptHolderICScode
OBJECT-TYPE
This attribute represents the Item Change Status iteration code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.2.1.15DisplayStringread-onlymandatory
eqptBoardTable
OBJECT-TYPE
A table representing the slots of all planned shelves. Each slot can hold a board of one of the following types: NT, EXT, LSM, ACU, CTRL, applique. This table has a row for each slot in each planned shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.3not-accessiblemandatory
eqptBoardEntry
OBJECT-TYPE
An entry in the eqptBoardTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.3.1not-accessiblemandatory
eqptSlotId
OBJECT-TYPE
A unique value to identify a slot position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.1EqptSlotIndexnot-accessiblemandatory
eqptSlotPlannedType
OBJECT-TYPE
A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is planned in the slot. If the board is planned, the string consists of a mnemonic that identifies the board-type. Following mnemonics are valid: <BOARD_MNEMONIC> A board of a specific type. Refer to the ETSI and US Configurations documents for the list of boards that are supported in a given release. ODM board types are planned with the board mnemonic, they are treated as unmanaged boards. EXT_MANAGED The presence of the LT module can be detected but it is not managed by this NT in the HYNT module. The LT type must be planned on the other NT. UNMANAGED Unmanaged board: this means that the presence of the board can be detected and that the board can be reset and powered-down but that it is not possible to establish communication with the board in software. NOT_PLANNED No board is planned in the slot. NOT_ALLOWED Slot planning is not allowed in this position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.2DisplayStringread-writemandatory
eqptSlotActualType
OBJECT-TYPE
A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is actually present in the slot. Following values are possible: <BOARD_MNEMONIC> Indicates the detected board-type. Uses same mnemonics as described in object eqptSlotPlannedType. EMPTY No board plugged within this slot. EXT_MANAGED The presence of the LT module can be detected but it is not managed by this NT in the HYNT module. The LT type must be planned on the other NT. UNMANAGED The type of the detected board is unknown and the planned board type is UNMANAGED or ODMboardtype. UNKNOWN The type of the detected board is unknown and the planned board type is not UNMANAGED and the planned board type is not EXT_MANAGED. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.3DisplayStringread-onlymandatory
eqptSlotPowerStatus
OBJECT-TYPE
This attribute is used by the operator to power-up or power-down an LSM slot. This attribute is not supported for other type of slots. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.4INTEGER {powerUp(1), powerDown(2)}read-writemandatory
eqptBoardAdminStatus
OBJECT-TYPE
This attribute is used by the operator to lock or unlock the board. This attribute is only supported for the following type of boards: NT (but notice that the system will refuse a request to lock the NT of a simplex system), EXT and LSM (if managed). This attribute has no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM, for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL board of the FD-REM, that has LT capabilities next to the regular CTRL capabilities. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.5INTEGER {unlock(1), lock(2)}read-writemandatory
eqptBoardOperStatus
OBJECT-TYPE
This attribute informs the operator whether the plug-in unit is able to perform its normal operation. This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.6INTEGER {enabled(1), disabled(2)}read-onlymandatory
eqptBoardOperError
OBJECT-TYPE
This attribute describes for what reason the board is not operational. These values correspond with the alarms which are generated in case of a failure. This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. Default value is no-error, replaced by result from startup sequence. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255 PERSIST: NO DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.7INTEGER {no-error(1), type-mismatch(2), board-missing(3), board-installation-missing(4), no-planned-board(5), waiting-for-sw(6), init-boot-failed(7), init-download-failed(8), init-connection-failed(9), init-configuration-failed(10), board-reset-protection(11), invalid-parameter(12), temperature-alarm(13), tempshutdown(14), defense(15), board-not-licensed(16), sem-power-fail(17), sem-ups-fail(18), board-in-incompatible-slot(19), download-ongoing(21), unknown-error(255)}read-onlymandatory
eqptBoardAvailStatus
OBJECT-TYPE
This attribute provides further information regarding the state of the board. It is set to available after a successfull selftest of the board (if applicable). This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..7 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.8INTEGER {available(1), inTest(2), failed(3), powerOff(4), notInstalled(5), offLine(6), dependency(7)}read-onlymandatory
eqptBoardRestart
OBJECT-TYPE
Writing a valid value to this object will restart the board in the specified mode. This attribute is only supported for the following type of boards: NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a restart without selftest is supported. An exception is the NRCD-C, FD-REM CTRL board, that has LT capabilities (restart with/without selftest) next to the regular CTRL capabilities. Contains previous restart reason, if not available it has value 255. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255 PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.9INTEGER {with-selftest(1), without-selftest(2), hot-restart(5), initialValue(255)}read-writemandatory
eqptBoardSwOverruleStatus
OBJECT-TYPE
Used to overrule the default software version for this board. This attribute is only supported for managed LSMs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: NO DEFVALUE: 1 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.10INTEGER {no-overrule(1), overrule(2)}read-writemandatory
eqptBoardContainerId
OBJECT-TYPE
This attribute describes in which equipment holder the slot is contained. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.11INTEGERread-onlymandatory
eqptBoardContainerOffset
OBJECT-TYPE
This attribute describes the position of the slot in the containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.12INTEGERread-onlymandatory
eqptBoardInventoryAlcatelCompanyId
OBJECT-TYPE
This attribute represents the company of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.13DisplayStringread-onlymandatory
eqptBoardInventoryTypeName
OBJECT-TYPE
This attribute represents the name of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.14DisplayStringread-onlymandatory
eqptBoardInventoryPBACode
OBJECT-TYPE
This attribute represents the Alcatel Printed Board Assembly code of of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.15DisplayStringread-onlymandatory
eqptBoardInventoryFPBACode
OBJECT-TYPE
This attribute represents the Alcatel Printed Board Assembly code of the board, which also identifies the boot software. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.16DisplayStringread-onlymandatory
eqptBoardInventoryICScode
OBJECT-TYPE
This attribute represents the Item Change Status iteration code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.17DisplayStringread-onlymandatory
eqptBoardInventoryCLEICode
OBJECT-TYPE
This attribute represents the (USA) Common Language Equipment Identification code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.18DisplayStringread-onlymandatory
eqptBoardInventorySerialNumber
OBJECT-TYPE
This attribute represents the serial number of the board. Breakdown of a sample serial number is : sample NANT-D serial number is AA1003ZA028 AA 10 03 ZA028 --- ==== ========== | | |=====' Production Plant Code | | | |==============' Week | |====================' Year ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.19DisplayStringread-onlymandatory
eqptBoardInventoryLastFailedTest
OBJECT-TYPE
Identifies the last failing test by means of 4 numbers, from MSB to LSB: - Table number (1 byte) - Segment number (1 byte) - Case number (1 byte) - Check number (1 byte) As long as there has been no failing selftest, the value of this object will be 0. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.20OCTET STRING (SIZE(4))read-onlymandatory
eqptSlotPlannedCapabilityProfile
OBJECT-TYPE
A pointer to the capability profile that will be used for this slot. Capability profiles are only applicable for LT cards that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards. Planning the profile should always be done at the same moment the LT/NTIO is planned. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.22AsamProfilePointerread-writemandatory
eqptBoardCustAlarmProfile
OBJECT-TYPE
A pointer to the customizable alarms profile which will be associated to NT for all shelves except FD-REM where the customizable alarms profile will be associated to master LT. In redundant NT shelves the profile will be associated to both NTA and NTB while associating customizable alarms profile to NTA or NTB. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.23AsamProfilePointerread-writemandatory
eqptBoardLastRestartCause
OBJECT-TYPE
This attribute gives the last restart cause for board. Currently only LSM board can support. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: unknown UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.24INTEGER {poweron(1), unknown(2), watchdog(3), coldreset(4), warmreset(5), hotreset(6), hotreload(7), cleandata(8), emergencybuild(9), poweronreset(10), commitfailure(11), timezonemodified(12)}read-onlymandatory
eqptBoardLastRestartTime
OBJECT-TYPE
This attribute gives the last restart time. Currently only LSM board can support. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.25NetworkTimeInSecondsread-onlymandatory
eqptBoardRestartNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the number of restart times. This counter is incremented each time eqptBoardLastRestartTime changes. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.26Counterread-onlymandatory
eqptBoardRelatedMgntEntityIPAddress
OBJECT-TYPE
Network address. It is a public OAM IP address related to xVPS. For single OAM IP is introduced, multi-xVPS boards existing on a same shelf may use one single OAM IP. This IP is configured on NT which manages these xVPS boards. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.27IpAddressread-onlymandatory
eqptBoardRelatedMgntEntityPairedNumber
OBJECT-TYPE
For single OAM IP is introduced, one public OAM IP can not identify an xVPS, so community string is introduced. Each active xVPS will have different community string in one shelf. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.28INTEGERread-onlymandatory
eqptBoardDualHostIPAddress
OBJECT-TYPE
Network address. Only applicable for FD REM connected to dual host. It is the public OAM IP address of the host connecting the Lsm in this externally managed slot. It is instantiated with default value and can only be set when the planned type is EXT_MANAGED. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.29IpAddressread-writemandatory
eqptBoardDualHostLsmLocation
OBJECT-TYPE
Only applicable for FD REM connected to dual host. It is the Rack/Shelf identifying the location of this externally managed slot, within the scope of the host connecting the Lsm. The slot component is implicitly present in the key. It is instantiated with default value and can only be set when the planned type is EXT_MANAGED. The type corresponds to the type EqptHolderIndex, except for the fact that this field can be 0, which is the default value. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.30EqptHolderIndexOrZeroread-writemandatory
eqptBoardIfSlotId
OBJECT-TYPE
This object gives the slot's linear number, which could be used by an external manager to help in mapping a given IfIndex to a physical slot location. It is a numerical value that consists of 6 bits. For a slot that does not carry any interfaces (e.g. applique or NTIO slot), the value is always '0xFF'. Note that this linear slot number is persistent across system restarts, i.e. the same linear slot number will be used for the same slot even after a restart of the ISAM system. However, it is not guaranteed that the same linear slot number will used after a migration to a new release. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0xFF UNITS: -
1.3.6.1.4.1.637.61.1.23.3.1.32INTEGERread-onlymandatory
eqptBoardRestartCountPerLt
OBJECT-TYPE
Wrap around counter which indicates the number of restart times per LT. This counter is incremented each time eqptBoardLastRestartTime changes.This counter will reset to zero when LT replaced or unplanned. Note:This counter is Per LT basis. LTs are distinguished based on serialNumber. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: NA
1.3.6.1.4.1.637.61.1.23.3.1.33Counterread-onlymandatory
eqptBoardClearRestartCountPerLt
OBJECT-TYPE
This object is a button-like object to reset the eqptBoardRestartCountPerLt counter. When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared. A value set to false(2) or other is ignored.. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: FALSE UNITS: NA
1.3.6.1.4.1.637.61.1.23.3.1.34TruthValueread-writemandatory
eqptShelfSummaryTable
OBJECT-TYPE
Shelf summary table, summarizing slot or board related status changes within each shelf. This table has one row per planned shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above.
1.3.6.1.4.1.637.61.1.23.4not-accessiblemandatory
eqptShelfSummaryEntry
OBJECT-TYPE
An entry of the shelf summary table. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.4.1not-accessiblemandatory
eqptShelfHwNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the number of configuration or status changes for slots/boards within this shelf. This counter is incremented each time any of the summary table objects of this shelf changes. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.1Counterread-onlymandatory
eqptShelfSlotSummaryOccupation
OBJECT-TYPE
Bitmap of the occupation of slots (0 = empty, 1 = full) Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.2OCTET STRING (SIZE(8))read-onlymandatory
eqptShelfBoardSummaryAdmin
OBJECT-TYPE
Bitmap of the administrative state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.3OCTET STRING (SIZE(8))read-onlymandatory
eqptShelfBoardSummaryAvail
OBJECT-TYPE
Bitmap of the availability state of the boards (0 = not available, 1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.4OCTET STRING (SIZE(8))read-onlymandatory
eqptShelfBoardSummaryOper
OBJECT-TYPE
Bitmap of the operational state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.5OCTET STRING (SIZE(8))read-onlymandatory
eqptShelfBoardSummaryTypeMismatch
OBJECT-TYPE
Bitmap of the mismatch between the actual board-type and the planned board-type (0 = mismatch, 1 = no mismatch). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.6OCTET STRING (SIZE(8))read-onlymandatory
eqptShelfBoardSummaryAlarm
OBJECT-TYPE
Bitmap of the boards which generated an alarm (0 = alarm, 1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.4.1.7OCTET STRING (SIZE(8))read-onlymandatory
eqptProt
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.5
eqptProtNextProtGroupId
OBJECT-TYPE
This object contains an appropriate value to be used for eqptProtGroupId when creating entries in the eqptProtGroupTable. The value 0 indicates that no unassigned entries are available. After each retrieval, the agent will modify the value to the next unassigned index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.1INTEGERread-onlymandatory
eqptProtGroupTable
OBJECT-TYPE
A table representing groups of protected or protecting elements. Only one row for NT protection group which will always be created and cannot be deleted. From ISAM R4.1.02 the default created NT protection group will be locked. (before it was unlocked). From R3.3 onwards, each LT protection group (comprised of 2 adjacent slots LT n and LT n+1, where n is a odd number), also has a row. The protection groups are created by default even though the protection groups are not used. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.5.2not-accessiblemandatory
eqptProtGroupEntry
OBJECT-TYPE
An entry of the eqptProtGroupTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.5.2.1not-accessiblemandatory
eqptProtGroupId
OBJECT-TYPE
A unique value to identify a protection group. The value 1 is reserved for the NT protection group, which is always present and cannot be deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.1INTEGERnot-accessiblemandatory
eqptProtGroupType
OBJECT-TYPE
This attributes distinguishes between 1+1 and 1:N protection groups. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.2INTEGER {one-plus-one(1), one-for-N(2)}read-writemandatory
eqptProtGroupNumberOfChanges
OBJECT-TYPE
Wrap around counter which indicates the number of status changes in this protection group as well as the status changes for the protecting elements within this group: eqptProtGroupSwitchoverCount; eqptProtGroupLastSwitchoverReason; eqptProtGroupAlarmBitmap; eqptProtElementStandbyStatus. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.3Counterread-onlymandatory
eqptProtGroupSwitchoverCount
OBJECT-TYPE
Wrap around counter for the number of switchovers being performed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.4Counterread-onlymandatory
eqptProtGroupLastSwitchoverReason
OBJECT-TYPE
This object contains the reason of the last switch over. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..17 PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.5INTEGER {noSwitchOver(1), forcedActive(2), boardNotPresent(3), extenderChainFailure(4), linkFailure(5), watchDogTimeOut(6), fileSystemCorrupt(7), configurationMismatch(8), boardUnplanned(9), boardLocked(10), shelfDefense(11), revertiveSwitchOver(12), lanxFailure(13), lanxHwFailure(14), lanxSdkFailure(15), dpoeAppFailure(16), dpoeUnreachable(17)}read-onlymandatory
eqptProtGroupEpsQuenchfactor
OBJECT-TYPE
This object contains a timervalue in 1/100 sec. The EpsQuench timer is used to prevent continuous switch-overs in case of unstable EPS. Value equal to zero means the quenching mechanism is disabled. Configuration of the EPS quenchfactor has mainly be foreseen for test purposes. Operators should preferably not be able to reconfigure the default value. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 seconds
1.3.6.1.4.1.637.61.1.23.5.2.1.6TimeTicksread-writemandatory
eqptProtGroupAlarmBitmap
OBJECT-TYPE
Status bitmap: bit 0 set means No defect at all bit 1 : if bit set, Standby degradation alarm is set (excludes bit 0 setting) bit 2 .. 31 : reserved for future extensions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0x00000001 UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.7INTEGER (1..4294967295)read-onlymandatory
eqptProtGroupAdminStatus
OBJECT-TYPE
Used by the administrator to disable or enable protection within that protection group. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: unlock(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.8INTEGER {unlock(1), lock(2)}read-writemandatory
eqptProtGroupAdminProtElement
OBJECT-TYPE
Only supported for 1:N protection groups. In case of a forced switchover to the spare element, this attribute is used to specify the element to be protected. The value 0 means that no element is specified. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.9INTEGERread-writemandatory
eqptProtGroupOperProtElement
OBJECT-TYPE
Only supported for 1:N protection groups. Indicates which element is currently protected by the spare element. The value 0 means that currently the spare element is not protecting any element. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.10INTEGERread-onlymandatory
eqptProtGroupRowStatus
OBJECT-TYPE
Entries in the eqptProtGroupTable can only be created at once, by specifying eqptProtGroupRowStatus=createAndGo(4). For NT protection group, if all values are valid then the entry is made active(1). For LT protection group, if the group is in service then the entry is made active(1). If the group is not in service then the entry is made notInService(2). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.2.1.11RowStatusread-writemandatory
eqptProtElementTable
OBJECT-TYPE
A table representing the protected or protecting elements. An element can be either a board or an extension chain. Both are identified by the corresponding slot identifier (extension chain is identified by slot of corresponding NT board). This table has only two rows from ISAM R2.2 to R3.2. From R3.3 onwards, this table has a row for each slots in the main shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.5.3not-accessiblemandatory
eqptProtElementEntry
OBJECT-TYPE
An entry of the eqptProtElementTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.5.3.1not-accessiblemandatory
eqptProtElementGroupId
OBJECT-TYPE
This attributes identifies the protection group to which this element belongs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.1INTEGERread-writemandatory
eqptProtElementType
OBJECT-TYPE
This attribute is used to distinguish between normal elements of a protection group and the spare element of a 1:N protection group. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: normal(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.2INTEGER {normal(1), spare(2)}read-writemandatory
eqptProtElementStandbyStatus
OBJECT-TYPE
This attribute reflects the standby status of the protection group element. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.3INTEGER {providing-service(1), hot-standby(2), cold-standby(3), idle(4)}read-onlymandatory
eqptProtElementRedcyCtrlStatus
OBJECT-TYPE
This attribute is used to force a switchover between elements of a protection group or to keep one of the elements active. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: normal(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.4INTEGER {normal(1), forced-active(2)}read-writemandatory
eqptProtElementRowStatus
OBJECT-TYPE
Entries in the eqptProtElementTable can only be created at once, by specifying eqptProtEelementRowStatus=createAndGo(4). If all values are valid then the entry is made active(1). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.5RowStatusread-writemandatory
eqptProtElementStandbyStatuschangeReason
OBJECT-TYPE
This attribute reflects the reason why the standby status of the protection group element has changed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..24 PERSIST: NO DEFVALUE: none(0) UNITS: -
1.3.6.1.4.1.637.61.1.23.5.3.1.6INTEGER {none(0), protectionGroupLocked(1), forcedActive(2), peerLinkUnAvailable(3), peerLocked(4), peerNotPlanned(5), peerNotPluggedIn(6), databaseNotInSync(7), lanxDynamicDataNotSynced(8), lanxSdkFailure(9), lanxRecovSdkFailure(10), lanxHwFailure(11), lanxDynDataSyncFailure(12), lanxStaticSyncFailure(13), lanxPeerCommFailure(14), lanxFailure(15), linkGroupNotAvailable(16), ltNotEnabled(17), lanxHiGigFailure(18), lanxReconcileFailure(19), lanxDiscoveryFailure(20), dpoeAppFailure(21), dpoeCommFailure(22), dpoeSyncFailure(23), dpoeUnreachable(24)}read-onlymandatory
eqptProfile
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.6
eqptProfileTable
OBJECT-TYPE
A table holding the mapping between the profileId and the corresponding profile name. This table has a row for every profile in the system. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.6.1not-accessiblemandatory
eqptProfileEntry
OBJECT-TYPE
An entry in the eqptProfileTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.6.1.1not-accessiblemandatory
eqptProfileId
OBJECT-TYPE
A value identifying a profile. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.6.1.1.1AsamProfileIndexread-onlymandatory
eqptProfileName
OBJECT-TYPE
The corresponding name for a given profile id. The name corresponding to the ProfileId must also be unique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.6.1.1.2AsamProfileNameread-onlymandatory
eqptProfileDescription
OBJECT-TYPE
A short description for the given profile, explaining the key attributes. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.6.1.1.3DisplayStringread-onlymandatory
eqptProfileApplicabilityTable
OBJECT-TYPE
This table lists for every defined profile in the system for which boards it is applicable. One profile can be applicable for multiple board types. Multiple profiles can be applicable for the same board type. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.6.2not-accessiblemandatory
eqptProfileApplicabilityEntry
OBJECT-TYPE
An entry in the eqptProfileApplicabilityTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.6.2.1not-accessiblemandatory
eqptBoardType
OBJECT-TYPE
A string representing the board for which the profile is applicable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.6.2.1.1DisplayStringread-onlymandatory
eqptDefaultProfile
OBJECT-TYPE
A flag indicating if this is the default profile for a specific board type. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.6.2.1.2TruthValueread-onlymandatory
eqptTestChainTable
OBJECT-TYPE
A table contains the test chain configuration indicating which shelf is connected to the TAP_UP or whether an external test head is connected to the TAP_UP. This table has one row for each planned shelf. ALCATEL NOTE: TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.7not-accessiblemandatory
eqptTestChainEntry
OBJECT-TYPE
An entry in the eqptTestChainTable.
1.3.6.1.4.1.637.61.1.23.7.1not-accessiblemandatory
eqptTestChainShelfToTapUp
OBJECT-TYPE
A unique value to identify a shelf position which is connected to the TAP_UP. The value '0' (default value) indicates that it is not connected. This parameter is used if eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and is ignored if eqptTestChainExtTestHeadToTapUp is set to '2' (i.e., 'yes'). ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: DEP / 0 plus the range of eqptHolderId of the shelves. DEFVALUE: 0 / this means that no shelf is configured to be connected to the TAP_UP. UNITS: NA SPARSE: NO DESCR: NA
1.3.6.1.4.1.637.61.1.23.7.1.1INTEGER (0..255)read-writemandatory
eqptTestChainExtTestHeadToTapUp
OBJECT-TYPE
This parameter is used to indicate whether an external test head is connected to the TAP_UP. no (1): no external test head is connected to the TAP_UP. yes (2): an external test head is connected to the TAP_UP. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: NA
1.3.6.1.4.1.637.61.1.23.7.1.2INTEGER {no(1), yes(2)}read-writemandatory
eqptCustAlarmProfile
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.8
eqptCustAlarmProfileIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for eqptCustAlarmProfileIndex when creating entries in the associated profile table. The value 0 indicates that no unassigned entries are available. To obtain the profile index value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index.
1.3.6.1.4.1.637.61.1.23.8.1AsamNextProfileIndexread-onlymandatory
eqptCustAlarmProfileTable
OBJECT-TYPE
A table representing the configurable attributes of the customizable alarms : a description, and the corresponding Alarm Outputs to be activated when this alarm occurs. This table has a row for each external alarms profile. It offers data for a maximum of 5 external alarms. Alarms that are not defined for a particular profile, need to contain default values in the fields corresponding to that alarm number. Independent of the alarm number, the name of the profile is also present, as well as the row status. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.8.2not-accessiblemandatory
eqptCustAlarmProfileEntry
OBJECT-TYPE
An entry in the eqptCustAlarmProfileTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.8.2.1not-accessiblemandatory
eqptCustAlarmProfileIndex
OBJECT-TYPE
The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.1AsamProfileIndexread-onlymandatory
eqptCustAlarmProfileName
OBJECT-TYPE
A textual name uniquely identifying this profile. Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.2AsamProfileNameread-writemandatory
eqptCustAlarmProfileUsedStatus
OBJECT-TYPE
Indicates the number of entities using this profile. If the reference count is greater than 0, then this profile is 'in use', and may NOT be deleted. If the value is 0, then this profile is 'not in use', and can be deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.3AsamProfileRefCountread-onlymandatory
eqptCustAlarmProfileRowStatus
OBJECT-TYPE
Entries in the eqptCustAlarmProfileTable can only be created at once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4). If all values are valid then the entry is made active(1). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.4RowStatusread-writemandatory
eqptCustAlarmProfileMnemonic1
OBJECT-TYPE
The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.5DisplayString (SIZE(0..16))read-writemandatory
eqptCustAlarmProfileDescription1
OBJECT-TYPE
The description of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.6DisplayString (SIZE(0..40))read-writemandatory
eqptCustAlarmProfileVisibleOutput1
OBJECT-TYPE
Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.7EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfileAudibleOutput1
OBJECT-TYPE
Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.8EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfilePolarity1
OBJECT-TYPE
Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.9EqptCustAlarmProfilePolarityTyperead-writemandatory
eqptCustAlarmProfileSeverity1
OBJECT-TYPE
Shows the severity of the alarm, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.10AsamAlarmSeverityTyperead-writemandatory
eqptCustAlarmProfileMnemonic2
OBJECT-TYPE
The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.11DisplayString (SIZE(0..16))read-writemandatory
eqptCustAlarmProfileDescription2
OBJECT-TYPE
The description of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.12DisplayString (SIZE(0..40))read-writemandatory
eqptCustAlarmProfileVisibleOutput2
OBJECT-TYPE
Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.13EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfileAudibleOutput2
OBJECT-TYPE
Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.14EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfilePolarity2
OBJECT-TYPE
Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2), UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.15EqptCustAlarmProfilePolarityTyperead-writemandatory
eqptCustAlarmProfileSeverity2
OBJECT-TYPE
Shows the severity of the alarm, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.16AsamAlarmSeverityTyperead-writemandatory
eqptCustAlarmProfileMnemonic3
OBJECT-TYPE
The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.17DisplayString (SIZE(0..16))read-writemandatory
eqptCustAlarmProfileDescription3
OBJECT-TYPE
The description of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.18DisplayString (SIZE(0..40))read-writemandatory
eqptCustAlarmProfileVisibleOutput3
OBJECT-TYPE
Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.19EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfileAudibleOutput3
OBJECT-TYPE
Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.20EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfilePolarity3
OBJECT-TYPE
Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.21EqptCustAlarmProfilePolarityTyperead-writemandatory
eqptCustAlarmProfileSeverity3
OBJECT-TYPE
Shows the severity of the alarm, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.22AsamAlarmSeverityTyperead-writemandatory
eqptCustAlarmProfileMnemonic4
OBJECT-TYPE
The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.23DisplayString (SIZE(0..16))read-writemandatory
eqptCustAlarmProfileDescription4
OBJECT-TYPE
The description of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.24DisplayString (SIZE(0..40))read-writemandatory
eqptCustAlarmProfileVisibleOutput4
OBJECT-TYPE
Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.25EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfileAudibleOutput4
OBJECT-TYPE
Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.26EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfilePolarity4
OBJECT-TYPE
Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.27EqptCustAlarmProfilePolarityTyperead-writemandatory
eqptCustAlarmProfileSeverity4
OBJECT-TYPE
Shows the severity of the alarm, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.28AsamAlarmSeverityTyperead-writemandatory
eqptCustAlarmProfileMnemonic5
OBJECT-TYPE
The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.29DisplayString (SIZE(0..16))read-writemandatory
eqptCustAlarmProfileDescription5
OBJECT-TYPE
The description of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.30DisplayString (SIZE(0..40))read-writemandatory
eqptCustAlarmProfileVisibleOutput5
OBJECT-TYPE
Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.31EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfileAudibleOutput5
OBJECT-TYPE
Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.32EqptCustAlarmProfileOutputTyperead-writemandatory
eqptCustAlarmProfilePolarity5
OBJECT-TYPE
Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.33EqptCustAlarmProfilePolarityTyperead-writemandatory
eqptCustAlarmProfileSeverity5
OBJECT-TYPE
Shows the severity of the alarm, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -
1.3.6.1.4.1.637.61.1.23.8.2.1.34AsamAlarmSeverityTyperead-writemandatory
eqptCustAlarmProfileMappingTable
OBJECT-TYPE
The table listing the profile name to profile Index Mapping.
1.3.6.1.4.1.637.61.1.23.8.3not-accessiblemandatory
eqptCustAlarmProfileMappingEntry
OBJECT-TYPE
An entry (conceptual row) representing the Customizable Alarm Profile Name to Index mapping. The system automatically creates an entry in this table for each corresponding entry (custAlarm-profile) created in the eqptCustAlarmProfileTable. Similarly, when a profile is deleted, the corresponding entry in this table is also automatically deleted by the system.
1.3.6.1.4.1.637.61.1.23.8.3.1not-accessiblemandatory
eqptCustAlarmProfileMappingName
OBJECT-TYPE
A textual name uniquely identifying this profile. This name has to be unique within the assigned scope. Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.8.3.1.1AsamProfileNamenot-accessiblemandatory
eqptCustAlarmProfileMappingIndex
OBJECT-TYPE
The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.8.3.1.2AsamProfileIndexread-onlymandatory
eqptMtaTest
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.9
eqptMtaTestHeadType
OBJECT-TYPE
setting the MTA test head type, four-wire mode or two-wire mode. This object should be consistent with external test head equipment, MTA subsystem will operate different relays based on this object. MTA commands will have differentiation between these two mode. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: NA
1.3.6.1.4.1.637.61.1.23.9.1INTEGER {four-wire(1), two-wire(2)}read-writemandatory
eqptBoardThermalSensorTable
OBJECT-TYPE
A table representing the actual value and thresholds of Thermal Sensor(s) on boards. One entry corresponds to each sensor on board. The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.10not-accessiblemandatory
eqptBoardThermalSensorEntry
OBJECT-TYPE
An entry of the equipment thermal sensor table on boards ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.10.1not-accessiblemandatory
eqptBoardThermalSensorId
OBJECT-TYPE
Index of thermal sensors on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..15 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.10.1.1INTEGERread-onlymandatory
eqptBoardThermalSensorActualTemperature
OBJECT-TYPE
Actual Temperature value read from thermal sensor on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -40..150 PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
1.3.6.1.4.1.637.61.1.23.10.1.2INTEGERread-onlymandatory
eqptBoardThermalSensorTcaThresholdLow
OBJECT-TYPE
Low Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
1.3.6.1.4.1.637.61.1.23.10.1.3INTEGERread-onlymandatory
eqptBoardThermalSensorTcaThresholdHigh
OBJECT-TYPE
High Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
1.3.6.1.4.1.637.61.1.23.10.1.4INTEGERread-onlymandatory
eqptBoardThermalSensorShutdownThresholdLow
OBJECT-TYPE
Low Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
1.3.6.1.4.1.637.61.1.23.10.1.5INTEGERread-onlymandatory
eqptBoardThermalSensorShutdownThresholdHigh
OBJECT-TYPE
High Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
1.3.6.1.4.1.637.61.1.23.10.1.6INTEGERread-onlymandatory
eqptPortMappingTable
OBJECT-TYPE
Equipment PortMapping table, showing the mapping between logical ports and physical ports (faceplate numbering). This table contains one row per logical port on the xHUB. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.13not-accessiblemandatory
eqptPortMappingEntry
OBJECT-TYPE
An entry of the equipment PortMapping table. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.13.1not-accessiblemandatory
eqptPortMappingLogPortNbr
OBJECT-TYPE
Index in equipment PortMapping Table: corresponds to the logical port id on the xHUB. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.1EqptPortMappingIndexnot-accessiblemandatory
eqptPortMappingLogPortType
OBJECT-TYPE
The logical port type corresponds to the link classification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.2INTEGER {uplink(1), downlink(2), hostlink(3), internal(4)}read-onlymandatory
eqptPortMappingPhyPortSlot
OBJECT-TYPE
The equipment slot index of the physical port. This slot will point to either a NT or NTIO slot position. This field is not applicable for hostlinks or internal, in which case it gets the value 0xFFFF ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.3EqptSlotIndexread-onlymandatory
eqptPortMappingPhyPortType
OBJECT-TYPE
The physcial port type. This field is not applicable for hostlinks. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14 PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.4INTEGER {not-applicable(1), sfp(2), xfp(3), vp(5), eth(10), mcast(11), ai(12), ieee(13), cfp(14)}read-onlymandatory
eqptPortMappingPhyPortNbr
OBJECT-TYPE
The pysical port number, which corresponds to the faceplate number of the sfp/xfp port. This field is not applicable for hostlinks or internal, in which case it gets the value 0xFF. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.5INTEGERread-onlymandatory
eqptPortMappingLSMSlot
OBJECT-TYPE
The equipment slot index of the corresponding LSM slot. This field is only applicable for hostlinks, and downlinks to which a remote LSM slot is assigned. In other cases it gets the value 0xFFFF. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.6EqptSlotIndexread-onlymandatory
eqptPortMappingChanges
OBJECT-TYPE
This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.13.1.7Counterread-onlymandatory
eqptPortMappingGlobalChangeCounter
OBJECT-TYPE
This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX. SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.14Counterread-onlymandatory
eqptPortProtectionTable
OBJECT-TYPE
This table holds the port protection groups
1.3.6.1.4.1.637.61.1.23.15not-accessiblemandatory
eqptPortProtectionEntry
OBJECT-TYPE
This entry represents a protection group which consists of two ports. These two ports can be on the same LT board, or on different LT's.
1.3.6.1.4.1.637.61.1.23.15.1not-accessiblemandatory
eqptPortProtectionPortId
OBJECT-TYPE
Each row is indexed by the IfIndex of the primary port of the protection group, the one which is protected. Only PON ports can be selected.
1.3.6.1.4.1.637.61.1.23.15.1.1InterfaceIndexread-onlymandatory
eqptPortProtectionRowStatus
OBJECT-TYPE
All rows instantiated using 'create-and-go' to mate 2 ports in a protection group. Set to 'destroy' to eliminate the protection group. RULE 1 - Cannot create a protection group on an LT card that doesn't support any-to-any redundancy. RULE 2 - Cannot mate two ports in a protection group if the paired port has already one or more interface(s) defined on top of the physical link interface. RULE 3 - Cannot delete a protection group if paired port is Admin UP.
1.3.6.1.4.1.637.61.1.23.15.1.2RowStatusread-writemandatory
eqptPortProtectionPairedPortId
OBJECT-TYPE
This attribute represents the IfIndex of the paired port. Only PON ports can be selected. Must satisfy the following VALIDATIONs (otherwise OLT should reject): 1) IfIndex must represent a real port. 2) PON cannot have any provisioned (planned) ONTs. 3) Cannot mate a PON with itself. 4) Cannot mate with a PON that is already mated in a protection scheme.
1.3.6.1.4.1.637.61.1.23.15.1.3InterfaceIndexread-writemandatory
eqptPortProtectionPortStatus
OBJECT-TYPE
This attribute represents the status of the primary port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the system is NOT using the port for transmission. Up - means the port is capable of being used for transmission/reception. Down - means the port is NOT capable of being used for transmission/reception (this includes a port that is ADMIN down as well as a port that is down due to an operational fault). Enumerations are as follows: 1 = Active Up 2 = Active Down 3 = Inactive Up 4 = Inactive Down
1.3.6.1.4.1.637.61.1.23.15.1.4INTEGERread-onlymandatory
eqptPortProtectionPairedPortStatus
OBJECT-TYPE
This attribute represents the status of the paired port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the system is NOT using the port for transmission. Up - means the port is capable of being used for transmission/reception. Down - means the port is NOT capable of being used for transmission/reception (this includes a port that is ADMIN down as well as a port that is down due to an operational fault). Enumerations are as follows: 1 = Active Up 2 = Active Down 3 = Inactive Up 4 = Inactive Down
1.3.6.1.4.1.637.61.1.23.15.1.5INTEGERread-onlymandatory
eqptPortProtectionSwitchCommand
OBJECT-TYPE
This attribute represents the IfIndex of the desired port to switch over to. Must satisfy the following VALIDATIONs (otherwise OLT should reject): 1) IfIndex must represent a real port. 2) IfIndex must be part of a protection group. 3) IfIndex must be either the primary or the paired port of the protection group on which the switchover is triggered.
1.3.6.1.4.1.637.61.1.23.15.1.6InterfaceIndexwrite-onlymandatory
eqptPortProtectionLastSwitchReason
OBJECT-TYPE
This attribute contains the reason for the last port switchover (if any). 0 = No switch has occurred (since last LT startup). 1 = Manual switch due to port Admin State change. 2 = Manual switch due to usage of Switch command. 3 = Automatic switch due to system determination. 4 = Automatic switch due to LT failure.
1.3.6.1.4.1.637.61.1.23.15.1.7INTEGERread-onlymandatory
eqptPortProtectionNumberOfSwitchovers
OBJECT-TYPE
This attribute contains the number of switchovers since last LT startup.
1.3.6.1.4.1.637.61.1.23.15.1.8INTEGERread-onlymandatory
eqptPortProtectionLookupTable
OBJECT-TYPE
This table holds the lookup port protection groups
1.3.6.1.4.1.637.61.1.23.16not-accessiblemandatory
eqptPortProtectionLookupEntry
OBJECT-TYPE
This entry represents a lookup protection group which consists of two ports. The key is either a primary or a paired port in the eqptPortProtectionTable.
1.3.6.1.4.1.637.61.1.23.16.1not-accessiblemandatory
eqptPortProtectionLookupPortId
OBJECT-TYPE
Each row is indexed by the IfIndex of a port in a protection group, either a primary or a paired port. Only PON ports can be selected.
1.3.6.1.4.1.637.61.1.23.16.1.1InterfaceIndexread-onlymandatory
eqptPortProtectionLookupPrimaryPortId
OBJECT-TYPE
This attribute represents the IfIndex of the primary port of the protection group to which the key port belongs. Only PON ports can be selected.
1.3.6.1.4.1.637.61.1.23.16.1.2InterfaceIndexread-onlymandatory
eqptBoardPlannedResourceTable
OBJECT-TYPE
A table representing the actual values of configured hardware resources on boards. This table only displays entries for resources on the boards that support this view. These are boards for which the relation between HW resource consumption and system configuration is not trivial. If the board is not supporting this view, then no entries will be displayed. The board does not physically need to be present for displaying the resources. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.17not-accessiblemandatory
eqptBoardPlannedResourceEntry
OBJECT-TYPE
An entry of the equipment planned resource table ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.17.1not-accessiblemandatory
eqptBoardPlannedResourceId
OBJECT-TYPE
Index of the planned resource for a board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.17.1.1INTEGERnot-accessiblemandatory
eqptBoardPlannedResourceCurrentValue
OBJECT-TYPE
The actual planned value for the resource ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.17.1.2INTEGERread-onlymandatory
eqptBoardPlannedResourceMaxValue
OBJECT-TYPE
The maximum value that the board supports for this resource. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.17.1.3INTEGERread-onlymandatory
eqptBoardPlannedResourceDescription
OBJECT-TYPE
A string describing the planned resource for this board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.17.1.4DisplayStringread-onlymandatory
eqptPowerTable
OBJECT-TYPE
Equipment power table, representing the power management objects per system, rack or shelf. This table contains one row for the system, rack or shelf that is subject to power management. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.18not-accessiblemandatory
eqptPowerEntry
OBJECT-TYPE
An entry of the equipment power table. An entry will be instantiated for a system/rack or shelf with active power management functionality. At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned RANI-B/RPNI-B comply to this requirement. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.18.1not-accessiblemandatory
eqptPowerId
OBJECT-TYPE
Index in equipment Power Table. Index gives the shelf identification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.1EqptHolderIndexnot-accessiblemandatory
eqptPowerAdminMode
OBJECT-TYPE
The eqptPowerAdminMode shows the configured power mode. This configured mode will be used to mask any failures detected for non-supported modes. Enumeration is as follows: 0 = no powermanagement mode configured 1 = AC -> failures on DC local and DC network suppressed 2 = AC + DC local -> failures on DC network suppressed 3 = DC network -> failures on AC or DC local suppressed 4 = DC network + DC local -> failures on AC suppressed 5 = DC local -> failures on DC network or AC suppressed Configuration of the eqptPowerAdminMode is not mandatory and will not impact the behavior of the power module. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.2INTEGER {no-powermgnt(0), ac(1), ac-and-dc-local(2), dc-network(3), dc-network-and-dc-local(4), dc-local(5)}read-writemandatory
eqptPowerOperMode
OBJECT-TYPE
The eqptPowerOperMode shows the power mode the NE is using at the moment of reading. The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO (e.g. RANI-B or RPNI-B) will provide valid information for this object. Other systems without Power mode support get no-powermgnt (0). Enumeration is as follows: 0 = system without an active power management 1 = AC 2 = AC + DC local 3 = DC network 4 = DC network + DC local 5 = DC local 6 = Battery fallback, i.e. only battery provides power to the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.3INTEGER {no-powermgnt(0), ac(1), ac-and-dc-local(2), dc-network(3), dc-network-and-dc-local(4), dc-local(5), battery-fallback(6)}read-onlymandatory
eqptPowerBatType
OBJECT-TYPE
This object is used to configure the battery type. This configuration only possible for planned powermanagement devices, in this case a planned RANI-B or RPNI-B. Only values for supported battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium BATTERY (1) is supported for the RANI-B/RPNI-B) The configured value is used to configure the power management driver. The link between the configurable value and the battery type is: 0 = no battery configured 1 = AGM/VRLA Lead Calcium BATTERY 2 = AGM/VRLA Pure Lead BATTERY 3 = FLOODED BATTERY 4 = GEL BATTERY ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.4INTEGER {not-configured(0), agm-vrla-PbCa-battery(1), agm-vrla-Pure-Pb-battery(2), flooded-battery(3), gel-battery(4)}read-writemandatory
eqptPowerBatStartCapacity
OBJECT-TYPE
The capacity (Ah) of the battery at the moment of installation. The value of the capacity is in 1/100 Ah. Instatiated when eqptPowerBatType is configured. The configuration of this object is mandatory together with the configuration of the eqptPowerBatType ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1000 .. 10000 PERSIST: YES DEFVALUE: 1000 UNITS: 1/10O Ah
1.3.6.1.4.1.637.61.1.23.18.1.5INTEGERread-writemandatory
eqptPowerBatPlannedLifetime
OBJECT-TYPE
Planned lifetime of the installed battery in 1/10 year. The planned lifetime, together with the start capacity, is used to calculate the actual maximal capacity of the battery. Instatiated when eqptPowerBatType is configured. The configuration of this object is mandatory together with the configuration of the eqptPowerBatType ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 150 PERSIST: YES DEFVALUE: 0 UNITS: 1/10 Year
1.3.6.1.4.1.637.61.1.23.18.1.6INTEGERread-writemandatory
eqptPowerBatState
OBJECT-TYPE
The battery state will provide a view on the state of the battery. Possible states are: charging, charged and discharging. This operational state has meaning for devices that have a configured eqptPowerBatType. Other devices get a not-configured (0) value returned. Enumeration is as follows: 1 = no data available, e.g. battery configured, but not connected 2 = charging 3 = charged 4 = discharging ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.7INTEGER {not-configured(0), no-data(1), charging(2), charged(3), discharging(4)}read-onlymandatory
eqptPowerBatFailure
OBJECT-TYPE
The battery failure state will provide an view on the failure state of the battery. This failure state has meaning for devices that have a configured eqptPowerBatType and eqptPowerBatState different from default or no-data. Other devices get a not-applicable (0) value returned. Specific ranges for the failure cases strongly depend on the battery type used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not applicable 1 = voltage good 2 = voltage out of range 3 = over-voltage 4 = over-temperature alarm on local temperature sensor 5 = battery depleted ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.8INTEGER {not-applicable(0), voltage-good(1), voltage-out-of-range(2), over-voltage(3), over-temperature(4), battery-depleted(5)}read-onlymandatory
eqptPowerBatTemperature
OBJECT-TYPE
Measured temperature of the battery in 1/10 Celcius The value is only readable when the battery type (eqptPowerBatType) is configured and the battery is installed and reachable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -1000 .. 1000 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Celcius
1.3.6.1.4.1.637.61.1.23.18.1.9INTEGERread-onlymandatory
eqptPowerBatActualCapacity
OBJECT-TYPE
The capacity (in % of a fully charged battery) of the battery. The value is only readable when the battery type (eqptPowerBatType) is configured and the battery is installed and reachable. Default value of 0% is returned when the battery is not reachable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 - 100 PERSIST: NO DEFVALUE: 0 UNITS: %
1.3.6.1.4.1.637.61.1.23.18.1.10INTEGERread-onlymandatory
eqptPowerBatDefenseMode
OBJECT-TYPE
The battery defense modes offers the operator the possibility to select the preferred power defense mode in case the system falls back to the battery mode. The power defense mode is a way to optimize the power consumption. In R5001 two options are possible. In later releases additional defense modes will be introduced. - no battery defense. In this mode the system will run normally, offering regular service until the battery runs out and the regular hw defenses are started (Dying Gasp) - voice priority. In this mode when the system falls back to the battery the regular service will be maintained until the battery drains until 90% and will then give priority to the voice LT's by powering down the DSL LT's. Voice service will be maintained until the battery runs out and the regular hw defenses are started (Dying Gasp). This configuration only possible for planned powermanagement devices, in this case a planned RANI-B or RPNI-B. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.11INTEGER {no-defense(0), voice-priority(1)}read-writemandatory
eqptPowerBatDefenseThreshold
OBJECT-TYPE
The threshold gives an indication of the remaining capacity of the battery at the moment the defense defined in eqptPowerBatDefenseMode should be started. The value is in %. In the default case the configured defense mode is immediately activated. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0-100 PERSIST: YES DEFVALUE: 80 UNITS: %
1.3.6.1.4.1.637.61.1.23.18.1.12INTEGERread-writemandatory
eqptPowerACState
OBJECT-TYPE
The AC power state will provide an view on the state of the AC Power supply. The value is different from no-powermgnt (0) for devices with power management functionality and AC input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.13INTEGER {no-powermgnt(0), active(1), active-failure(2), failure(3)}read-onlymandatory
eqptPowerACFailure
OBJECT-TYPE
The AC failure state will provide an view on the failure state of the AC power supply. This failure state has meaning when eqptPowerACstate different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the AC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.14INTEGER {not-applicable(0), voltage-good(1), voltage-out-of-range(2)}read-onlymandatory
eqptPowerNDCaState
OBJECT-TYPE
The NDCa (Network DC a) state will provide an view on the state of the Network DC Power supply. The value is different from no-powermgnt (0) for devices with power management functionality and NDC a input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.15INTEGER {no-powermgnt(0), active(1), active-failure(2), failure(3)}read-onlymandatory
eqptPowerNDCaFailure
OBJECT-TYPE
The NDCa failure state will provide an view on the failure state of the Network DC a power supply. This failure state has meaning when eqptPowerNDCaState different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the DC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage-good 2 = low-voltage 3 = under-voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.16INTEGER {not-applicable(0), voltage-good(1), low-voltage(2), under-voltage(3)}read-onlymandatory
eqptPowerNDCbState
OBJECT-TYPE
The NDCb (Network DC a) state will provide an view on the state of the Network DC b power supply. The value is different from no-powermgnt (0) for devices with power management functionality and NDC b input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.17INTEGER {no-powermgnt(0), active(1), active-failure(2), failure(3)}read-onlymandatory
eqptPowerNDCbFailure
OBJECT-TYPE
The NDCb failure state will provide an view on the failure state of the Network DC b power supply. This failure state has meaning when eqptPowerNDCbState different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the DC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage-good 2 = low-voltage 3 = under-voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.18INTEGER {not-applicable(0), voltage-good(1), low-voltage(2), under-voltage(3)}read-onlymandatory
eqptPowerLDCaState
OBJECT-TYPE
The LDCa power state will provide an view on the state of the local DC a power supply. The value is different from no-powermgnt (0) for devices with power management functionality and LDC a input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.19INTEGER {no-powermgnt(0), active(1), active-failure(2), failure(3)}read-onlymandatory
eqptPowerLDCaFailure
OBJECT-TYPE
The LDCa failure state will provide an view on the failure state of the local DC a power supply. This failure state has meaning when eqptPowerLDCaState different from default. In other cases not-applicable (0) is returned. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.20INTEGER {not-applicable(0), voltage-good(1), voltage-out-of-range(2)}read-onlymandatory
eqptPowerLDCbState
OBJECT-TYPE
The LDCb power state will provide an view on the state of the local DC b power suply. The value is different from no-powermgnt (0) for devices with power management functionality and LDC b input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.21INTEGER {no-powermgnt(0), active(1), active-failure(2), failure(3)}read-onlymandatory
eqptPowerLDCbFailure
OBJECT-TYPE
The LDCb failure state will provide an view on the failure state of the local DC b power supply. This failure state has meaning when eqptPowerLDCbState different from default. In other cases not-applicable (0) is returned. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -
1.3.6.1.4.1.637.61.1.23.18.1.22INTEGER {not-applicable(0), voltage-good(1), voltage-out-of-range(2)}read-onlymandatory
eqptPowerInVoltage
OBJECT-TYPE
Measured incoming voltage in 1/10 Volt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Volt
1.3.6.1.4.1.637.61.1.23.18.1.23INTEGERread-onlymandatory
eqptPowerInCurrent
OBJECT-TYPE
Measured incoming current in 1/10 Ampere Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Ampere
1.3.6.1.4.1.637.61.1.23.18.1.24INTEGERread-onlymandatory
eqptPowerInConsumedPower
OBJECT-TYPE
Calculated incoming consumed power in 1/10 Watt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 6000 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Watt
1.3.6.1.4.1.637.61.1.23.18.1.25INTEGERread-onlymandatory
eqptPowerSupplyTable
OBJECT-TYPE
Equipment power table, representing the power suplly management objects This table contains one row per power supply supported on the system. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.19not-accessiblemandatory
eqptPowerSupplyEntry
OBJECT-TYPE
An entry of the equipment power table. An entry will be instantiated per power supply supported on the system. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.19.1not-accessiblemandatory
eqptPowerSupplyId
OBJECT-TYPE
Index in equipment Power Supply Table. This is a number representing the Nth power supply present in the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.1EqptPowerSupplyIndexnot-accessiblemandatory
eqptPowerSupplyPartNumber
OBJECT-TYPE
Report the part number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.2OCTET STRING (SIZE(13))read-onlymandatory
eqptPowerSupplyCleiCode
OBJECT-TYPE
Report the CLEI code of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.3OCTET STRING (SIZE(11))read-onlymandatory
eqptPowerSupplySerNumber
OBJECT-TYPE
Report the serial number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.4OCTET STRING (SIZE(19))read-onlymandatory
eqptPowerSupplyVin
OBJECT-TYPE
Report the incoming voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.5INTEGERread-onlymandatory
eqptPowerSupplyIin
OBJECT-TYPE
Report the incoming current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.6INTEGERread-onlymandatory
eqptPowerSupplyVout
OBJECT-TYPE
Report the output voltage provided by the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.7INTEGERread-onlymandatory
eqptPowerSupplyIout
OBJECT-TYPE
Report the output current provided by the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.8INTEGERread-onlymandatory
eqptPowerSupplyTemperature
OBJECT-TYPE
Report the temperature of the power supply in millidegree ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.9INTEGERread-onlymandatory
eqptPowerSupplyFaultVin
OBJECT-TYPE
Report the fault or warning occurring for the input voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.10INTEGER {no-error(0), input-overvoltage-fault(1), input-overvoltage-warning(2), input-undervoltage-warning(3), input-undervoltage-fault(4), input-ac-nok-fault(5), input-ac-nok-warning(6), unit-off-for-insufficient-input-voltage(7)}read-onlymandatory
eqptPowerSupplyFaultVout
OBJECT-TYPE
Report the fault or warning occurring for the output voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.11INTEGER {no-error(0), output-overvoltage-fault(1), output-overvoltage-warning(2), output-undervoltage-warning(3), output-undervoltage-fault(4)}read-onlymandatory
eqptPowerSupplyFaultIin
OBJECT-TYPE
Report the fault or warning occurring for the input current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.12INTEGER {no-error(0), input-overcurrent-fault(1), input-overcurrent-warning(2), input-overpower-warning(3)}read-onlymandatory
eqptPowerSupplyFaultIout
OBJECT-TYPE
Report the fault or warning occurring for the output current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.13INTEGER {no-error(0), output-overcurrent-fault(1), output-overcurrent-warning(2), output-undercurrent-warning(3), output-undercurrent-fault(4)}read-onlymandatory
eqptPowerSupplyFaultTemperature
OBJECT-TYPE
Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.14INTEGER {no-error(0), overtemperature-fault(1), overtemperature-warning(2), undertemperature-warning(3), undertemperature-fault(4)}read-onlymandatory
eqptPowerSupplyFaultCml
OBJECT-TYPE
Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.15INTEGER {no-error(0), invalid-or-unsupported-command-received(1), invalid-or-unsupported-data-received(2), packet-error-check-failed(3), memory-fault-detected(4), processor-fault-detected(5), other-communication-fault(6), other-memory-or-logic-fault(7)}read-onlymandatory
eqptPowerSupplyPresent
OBJECT-TYPE
Report if the power supply is present. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.16INTEGER {yes(0), no(1)}read-onlymandatory
eqptPowerSupplyFaultDetected
OBJECT-TYPE
Report if a fault has been detected. If yes, then eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout, eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut, eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml is reporting an error. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.19.1.17INTEGER {no(0), yes(1)}read-onlymandatory
eqptPowerSupplyRftc
OBJECT-IDENTITY
1.3.6.1.4.1.637.61.1.23.20
eqptPowerRftcTable
OBJECT-TYPE
Equipment RFT-C power table, representing the RFT-C management objects This table contains one row per RFT-C module supported on the system. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.20.1not-accessiblemandatory
eqptPowerRftcEntry
OBJECT-TYPE
An entry of the equipment RFT-C power table. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.20.1.1not-accessiblemandatory
eqptPowerRftcId
OBJECT-TYPE
Index in equipment Power RFT-C Table. This is a number represents the shelf containting the RFT-C module. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.1EqptHolderIndexread-onlymandatory
eqptPowerRftcVCommon
OBJECT-TYPE
Report the common voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: mV
1.3.6.1.4.1.637.61.1.23.20.1.1.2INTEGERread-onlyoptional
eqptPowerRftcICommon
OBJECT-TYPE
Report the common current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: mA
1.3.6.1.4.1.637.61.1.23.20.1.1.3INTEGERread-onlyoptional
eqptPowerRftcTHotspot
OBJECT-TYPE
Report the temperature of the power supplys hotspot in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: °C
1.3.6.1.4.1.637.61.1.23.20.1.1.4INTEGERread-onlyoptional
eqptPowerRftcTAmbient
OBJECT-TYPE
Report the ambient temperature of the power supply in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: °C
1.3.6.1.4.1.637.61.1.23.20.1.1.5INTEGERread-onlyoptional
eqptPowerRftcSWVersion
OBJECT-TYPE
Report the software version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.6DisplayStringread-onlyoptional
eqptPowerRftcHWVersion
OBJECT-TYPE
Report the hardware version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.7DisplayStringread-onlyoptional
eqptPowerRftcHWRevision
OBJECT-TYPE
Report hardware revision of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.8INTEGERread-onlyoptional
eqptPowerRftcSerialnumber
OBJECT-TYPE
Report serial number of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.9DisplayStringread-onlyoptional
eqptPowerRftcManufacturer
OBJECT-TYPE
Report the manufacturer code of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.10DisplayStringread-onlyoptional
eqptPowerRftcLineCount
OBJECT-TYPE
Report the number of lines used on this RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.1.1.11INTEGERread-onlyoptional
eqptPowerRftcLineTable
OBJECT-TYPE
ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above
1.3.6.1.4.1.637.61.1.23.20.2not-accessiblemandatory
eqptPowerRftcLineEntry
OBJECT-TYPE
An entry in the eqptPowerRftcLineTable. ALCATEL NOTE: SUPPORT: YES
1.3.6.1.4.1.637.61.1.23.20.2.1not-accessiblemandatory
eqptPowerRftcLineId
OBJECT-TYPE
Report the line number ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.2.1.1INTEGERread-onlymandatory
eqptPowerRftcLineStatus
OBJECT-TYPE
Report the line status. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -
1.3.6.1.4.1.637.61.1.23.20.2.1.2EqptPowerRftcLineStatusread-onlymandatory