MIBs Depot

ARUBAWIRED-VSX-MIB

Registered at
1.3.6.1.4.1.47196.4.1.1.3.7
Last updated
2018-09-05 00:00
Organization
HPE/Aruba Networking Division
Revisions
2018-09-05 00:00, 2018-06-08 00:00
Namespace
arubaos
Source file
ARUBAWIRED-VSX-MIB
Digest
sha256:48a7a4ce2626aac72d8011d1773abb0cdb1b8288326ca59784b2285cd4f9d8d0

Description

This is the MIB module related to HPE Aruba VSX feature

Contact

Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
ARUBAWIRED-NETWORKING-OIDwndFeatures
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ARUBAWIRED-NETWORKING-OID
ARUBAWIRED-VSX-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
VidList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight VLAN index (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VLAN index values defined in the scope of IEEE 802.1Q.
current

Objects

NameOIDSyntaxAccessStatus
arubaWiredVsxConfig
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.1
arubaWiredVsxIslConfig
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.1.1
arubaWiredVsxIslPort
OBJECT-TYPE
Interface name corresponding to the VSX InterSwitchLink port. A value of 0 means there is no ISL port configuration.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.1DisplayStringread-writecurrent
arubaWiredVsxIslHelloInterval
OBJECT-TYPE
ISLP hello interval in seconds. The default value is 1.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.2Integer32 (1..5)read-writecurrent
arubaWiredVsxIslHoldTime
OBJECT-TYPE
ISL port-flap hold time in seconds. The default value is 0.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.3Integer32 (0..3)read-writecurrent
arubaWiredVsxIslHelloTimeout
OBJECT-TYPE
ISL hello timeout in seconds. The default value is 3.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.4Integer32 (3..20)read-writecurrent
arubaWiredVsxIslSystemID
OBJECT-TYPE
Device identifier. This is advertised over ISL.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.5DisplayStringread-onlycurrent
arubaWiredVsxIslPlatformName
OBJECT-TYPE
Device type. This is advertised over ISL.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.6DisplayStringread-onlycurrent
arubaWiredVsxIslSwVersion
OBJECT-TYPE
S/W version running on the device type. This is advertised over ISL.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.7DisplayStringread-onlycurrent
arubaWiredVsxIslVIDList
OBJECT-TYPE
VLAN IDs that the ISL port is a member of.
1.3.6.1.4.1.47196.4.1.1.3.7.1.1.8VidListread-onlycurrent
arubaWiredVsxKeepAliveConfig
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.1.2
arubaWiredVsxKeepAliveSrcIPAddrType
OBJECT-TYPE
The KeepAlive source address type. It can be IPv4 or IPv6.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.1InetAddressTyperead-writecurrent
arubaWiredVsxKeepAliveSrcIPAddr
OBJECT-TYPE
The KeepAlive source address. It can be IPv4 or IPv6.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.2InetAddressread-writecurrent
arubaWiredVsxKeepAliveVrf
OBJECT-TYPE
The KeepAlive VRF domain.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.3DisplayStringread-writecurrent
arubaWiredVsxKeepAliveUdpPort
OBJECT-TYPE
The KeepAlive UDP port. Same port is used as source and destination UDP ports.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.4Integer32 (1024..65535)read-writecurrent
arubaWiredVsxKeepAlivePeerIPAddrType
OBJECT-TYPE
The KeepAlive peer address type. It can be IPv4 or IPv6.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.5InetAddressTyperead-writecurrent
arubaWiredVsxKeepAlivePeerIPAddr
OBJECT-TYPE
The KeepAlive peer address. It can be IPv4 or IPv6.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.6InetAddressread-writecurrent
arubaWiredVsxKeepAliveHelloInterval
OBJECT-TYPE
KeepAlive hello interval in seconds. The default value is 1.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.7Integer32 (1..5)read-writecurrent
arubaWiredVsxKeepAliveHelloTimeout
OBJECT-TYPE
KeepAlive hello timeout in seconds. The default value is 3.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.8Integer32 (3..20)read-writecurrent
arubaWiredVsxKeepAliveSystemID
OBJECT-TYPE
Device identifier that will be advertised via KeepAlive protocol.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.9DisplayStringread-onlycurrent
arubaWiredVsxKeepAlivePlatformName
OBJECT-TYPE
Device type that will be advertised via KeepAlive protocol.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.10DisplayStringread-onlycurrent
arubaWiredVsxKeepAliveSwVersion
OBJECT-TYPE
S/W version that will be advertised via KeepAlive protocol.
1.3.6.1.4.1.47196.4.1.1.3.7.1.2.11DisplayStringread-onlycurrent
arubaWiredVsxAggregatorConfig
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.1.3
arubaWiredVsxAggregatorTable
OBJECT-TYPE
This table supplements the table 'dot3adAggTable' in ieee802.3ad mib.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1not-accessiblecurrent
arubaWiredVsxAggregatorEntry
OBJECT-TYPE
The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1not-accessiblecurrent
arubaWiredVsxAggregatorIndex
OBJECT-TYPE
The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.1InterfaceIndexnot-accessiblecurrent
arubaWiredVsxAggregatorType
OBJECT-TYPE
This field specifies the aggregator/lag type.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.2INTEGER {point2Point(1), multiChassis(2)}read-createcurrent
arubaWiredVsxVlanList
OBJECT-TYPE
VLANs that this aggregator is a member of. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.3VidListread-onlycurrent
arubaWiredVsxLoopProtectEnabled
OBJECT-TYPE
Loop Protect protocol admin state for this VSX. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.4TruthValueread-onlycurrent
arubaWiredVsxLoadBalanceScheme
OBJECT-TYPE
Load balance scheme configured for this VSX. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.5INTEGER {l2-Src-Dst(1), l3-Src-Dst(2), l4-Src-Dst(3)}read-onlycurrent
arubaWiredVsxCosOverride
OBJECT-TYPE
CoS override configuration for this VSX. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.6INTEGER (0..7)read-onlycurrent
arubaWiredVsxDscpOverride
OBJECT-TYPE
DSCP override configuration for this VSX. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.7INTEGER (0..63)read-onlycurrent
arubaWiredVsxQoSTrust
OBJECT-TYPE
Port QoS trust mode configured for this VSX. This is used for configuration consistency validation.
1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.8INTEGER {cos(1), dscp(2)}read-onlycurrent
arubaWiredVsxGlobalConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.1.4
arubaWiredVsxDeviceRole
OBJECT-TYPE
VSX device role.
1.3.6.1.4.1.47196.4.1.1.3.7.1.4.1INTEGER {primary(1), secondary(2), notConfigured(3)}read-onlycurrent
arubaWiredVsxConfigSync
OBJECT-TYPE
VSX config sync.
1.3.6.1.4.1.47196.4.1.1.3.7.1.4.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
arubaWiredVsxStatus
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.2
arubaWiredVsxIslStatus
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.2.1
arubaWiredVsxIslOperState
OBJECT-TYPE
ISL operational state.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.1INTEGER {init(1), outSync(2), inSync(3)}read-onlycurrent
arubaWiredVsxIslPduTx
OBJECT-TYPE
Number of ISL PDUs transmitted by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.2Integer32read-onlycurrent
arubaWiredVsxIslPduRx
OBJECT-TYPE
Number of ISL PDUs received by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.3Integer32read-onlycurrent
arubaWiredVsxIslHelloTx
OBJECT-TYPE
Number of ISL Hello packets transmitted by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.4Integer32read-onlycurrent
arubaWiredVsxIslHelloRx
OBJECT-TYPE
Number of ISL Hello packets received by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.5Integer32read-onlycurrent
arubaWiredVsxDeviceOperSystemID
OBJECT-TYPE
System identifier used by this device - derived from system identifier values of the 2 devices.
1.3.6.1.4.1.47196.4.1.1.3.7.2.1.6DisplayStringread-onlycurrent
arubaWiredVsxKeepAliveStatus
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.2.2
arubaWiredVsxKeepAliveOperState
OBJECT-TYPE
KeepAlive protocol operational state.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.1INTEGER {init(1), configured(2), inSyncEstablished(3), outofSyncEstablished(4), initEstablished(5), failed(6), stopped(7)}read-onlycurrent
arubaWiredVsxKeepAlivePacketsTx
OBJECT-TYPE
Number of KeepAlive protocol packets transmitted by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.2Integer32read-onlycurrent
arubaWiredVsxKeepAlivePacketsRx
OBJECT-TYPE
Number of KeepAlive protocol packets received by this device.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.3Integer32read-onlycurrent
arubaWiredVsxKeepAlivePacketsDrop
OBJECT-TYPE
Number of KeepAlive protocol packets dropped.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.4Integer32read-onlycurrent
arubaWiredVsxKeepAliveTimeoutCount
OBJECT-TYPE
Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.5Integer32read-onlycurrent
arubaWiredVsxKeepAliveLastEstablishedTime
OBJECT-TYPE
Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.6TimeTicksread-onlycurrent
arubaWiredVsxKeepAliveLastFailedTime
OBJECT-TYPE
Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed.
1.3.6.1.4.1.47196.4.1.1.3.7.2.2.7TimeTicksread-onlycurrent
arubaWiredVsxNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.3
arubaWiredVsxTraps
OBJECT-IDENTITY
1.3.6.1.4.1.47196.4.1.1.3.7.3.1

Notifications

NameOIDStatus
islUp
NOTIFICATION-TYPE
An islUp trap signifies that ISL transitioned to inSync state
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1current
islDown
NOTIFICATION-TYPE
An islDown trap signifies that ISL transitioned to outOfSync state
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2current
keepAliveUp
NOTIFICATION-TYPE
A keepAliveUp trap signifies that KA is in established state
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3current
keepAliveDown
NOTIFICATION-TYPE
A keepAliveDown trap signifies that KA is in failed state
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4current