MIBs Depot

ARRIS-CM-DEVICE-MIB

Registered at
1.3.6.1.4.1.4115.1.3.1
Last updated
1902-12-10 00:00
Organization
ARRIS Broadband
Revisions
1902-11-08 00:00, 1902-10-29 00:00, 1902-10-23 00:00, 1902-07-10 00:00
Namespace
arris
Source file
ARRIS-CM-DEVICE-MIB
Digest
sha256:031b7aa4aa9b89945d6dcb683005aa88a8b37863b98c7746646e12cb3b73a889

Description

This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices.

Contact

Robert Coley Postal: ARRIS Broadband 3871 Lakefield Drive Suite 300 Suwanee, GA 30024-1242 U.S.A. Phone: +1 770-622-8400 E-mail: robert.coley@arrisi.com

Imports

FromSymbols
ARRIS-MIBarrisProdIdCM
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ARRIS-CM-DEVICE-MIB
ARRIS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
ArrsCmDevProvMethod
TEXTUAL-CONVENTION
These are the various provisioning methods that are supported by the device.
current

Objects

NameOIDSyntaxAccessStatus
arrisCmDevMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1
arrisCmDevBase
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.1
arrisCmDevWanIsolationState
OBJECT-TYPE
The object controls the state of WAN Isolation. The meaning of the state is as follows: off-InActiveMode(1) - Data traffic passes freely between the home user’s network and the outside network (i.e. the Internet). In this mode, the WAN Isolation state is considered 'InActive'. on-ActiveMode(2) - The home user’s network is isolated from the Internet. Data traffic will not pass between the home user's network and the Internet. In this mode, the WAN Isolation state is considered 'Active'.
1.3.6.1.4.1.4115.1.3.1.1.1.1INTEGER {off-InActiveMode(1), on-ActiveMode(2)}read-writecurrent
arrisCmDevSwImageName
OBJECT-TYPE
The name of the software image currently operating on this device.
1.3.6.1.4.1.4115.1.3.1.1.1.2DisplayStringread-onlycurrent
arrisCmDevSwImageBuildTime
OBJECT-TYPE
The build date and time of the software image currently operating on this device.
1.3.6.1.4.1.4115.1.3.1.1.1.3DisplayStringread-onlycurrent
arrisCmDevCmSetup
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.2
arrisCmDevPermanentSetup
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.2.2
arrisCmDevOperationalSetup
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.2.3
arrisCmDevProvMethodIndicator
OBJECT-TYPE
Indicates the method used to provision the device. This object should only be changed by the configuration file. The following provisioning methods are supported: docsisOnly(0) - DOCSIS-only provisioning fullPacketCable(1) - fully PacketCable compliant provisioning packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and SNMPv3 disabled cps(3) - compatible with CPS2000 (SNMPv2; IPSEC disabled) gupi(4) - SNMPv2, with no SNMP Informs and IPSEC disabled singleMAC(5) - single config file (SNMPv2, single IP address, single MAC address, no SNMP Informs, IPSEC disabled)
1.3.6.1.4.1.4115.1.3.1.1.2.3.2ArrsCmDevProvMethodread-writecurrent
arrisCmDevEnableDocsis20
OBJECT-TYPE
This object is used to enable/disable DOCSIS 2.0 operation mode. This object is stored into NVRAM and will be operational after the next reboot of the device. Set to true(1) to enable DOCSIS 2.0 operation mode. Set to false(2) to disable DOCSIS 2.0 operation mode. Setting this object to the same value that is already stored in NVRAM will do nothing. After the successful setting of this object, the device will automatically reboot.
1.3.6.1.4.1.4115.1.3.1.1.2.3.3TruthValueread-writecurrent
arrisCmDevSalesSetup
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.2.4
arrisCmDevCmTest
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.3
arrisCmDevManufacturingTest
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.3.2
arrisCmDevOperationalTest
OBJECT-IDENTITY
1.3.6.1.4.1.4115.1.3.1.1.3.3