ARRIS-C3-SUBINT-MIB
- Registered at
- 1.3.6.1.4.1.4115.1.4.3.11
- Last updated
- 2003-08-20 00:00
- Organization
- Arris International
- Namespace
- arris
- Source file
ARRIS-C3-SUBINT-MIB- Digest
sha256:6d6c28fc6b1f1e6e77b0b91b80fbad2d49c62810450198419967018de6ff6802
Description
This MIB manages the Sub-Interface software on the Arris CMTS C3
Contact
Network Management Postal: Arris International. 4400 Cork Airport Business Park Cork Airport, Kinsale Road Cork, Ireland. Tel: +353 21 7305 800 Fax: +353 21 4321 972
Imports
| From | Symbols |
|---|---|
| ARRIS-MIB | cmtsC3 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARRIS-C3-SUBINT-MIB ARRIS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dcxSubIntObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4115.1.4.3.11.1 | |||
| dcxSubIntControlGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4115.1.4.3.11.1.1 | |||
| dcxSubIntTable OBJECT-TYPE Arris C3 Proprietary Sub-Interface table | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1 | not-accessible | current | |
| dcxSubIntEntry OBJECT-TYPE A row in the dcxSubIntTable. An entry in this table exists for each Sub-Interface configured on the CMTS | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1 | not-accessible | current | |
| dcxSubIntSlotIndex OBJECT-TYPE the slot index of the card in the Cmts | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.1 | Unsigned32 (0..4094) | not-accessible | current |
| dcxSubIntPortIndex OBJECT-TYPE the port index of the port on a card | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.2 | Unsigned32 (0..4094) | not-accessible | current |
| dcxSubIntSubIntIndex OBJECT-TYPE the sub-interface index of the sub-inteface on a port | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.3 | Unsigned32 (0..4094) | not-accessible | current |
| dcxSubIntBridgeGroupNum OBJECT-TYPE bridge-group number which the sub-interface is configured on, 0 is reserved, 255 indicates not configured in a bridge-group | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.4 | Unsigned32 (0..254) | read-write | current |
| dcxSubIntManagementAccess OBJECT-TYPE is management of Cmts allowed through sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.5 | TruthValue | read-write | current |
| dcxSubIntPrimaryIpAddress OBJECT-TYPE primary ip address of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.6 | IpAddress | read-write | current |
| dcxSubIntPrimaryIpMask OBJECT-TYPE primary ip subnet mask of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.7 | IpAddress | read-write | current |
| dcxSubIntPrimaryIpBCastAddress OBJECT-TYPE primary ip subnet broadcast address of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.8 | IpAddress | read-write | current |
| dcxSubIntRelayEnabled OBJECT-TYPE are DHCP packets relayed on this sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.9 | TruthValue | read-write | current |
| dcxSubIntRelayInformationOption OBJECT-TYPE is the information options added to the DHCP packets relayed on this sub-interface. Has no effect if dcxSubIntRelayEnabled is False on the sub-interface. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.10 | TruthValue | read-write | current |
| dcxSubIntGiaddrPolicy OBJECT-TYPE which giaddr is used for DHCP packets relayed from CPEs on this sub-interface, off(0) is returned when dcxSubIntRelayEnabled is False, primary(1) indicates that the primary address on sub-interface is used, policy(2) indicates that the first secondary is used. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.11 | INTEGER {off(0), primary(1), policy(2)} | read-write | current |
| dcxSubIntInboundAclIndex OBJECT-TYPE which Access Control List is this sub-interface bound to for inbound packets, a value of zero indicates no ACL binding for inbound packets on the sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.12 | Unsigned32 (0..2999) | read-write | current |
| dcxSubIntOutgoingAclIndex OBJECT-TYPE which Access Control List is this sub-interface bound to for outgoing packets, a value of zero indicates no ACL binding for inbound packets on the sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.13 | Unsigned32 (0..2999) | read-write | current |
| dcxSubIntUnboundTag OBJECT-TYPE sub-interface encapsulate Vlan Tag value, 0 indicates no tag | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.14 | Unsigned32 (0..4094) | read-write | current |
| dcxSubIntUnboundTagIsNative OBJECT-TYPE sub-interface will not generate packets with tags when native is configured | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.15 | TruthValue | read-write | current |
| dcxSubIntOperational OBJECT-TYPE states if the subinterface is operational or not, factors are dcxSubIntStatus and the physical ports oper and admin status | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.16 | TruthValue | read-only | current |
| dcxSubIntStatus OBJECT-TYPE Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no restriction on changing values in a row of this table while the row is active. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.17 | RowStatus | read-create | current |
| dcxSubIntIpTable OBJECT-TYPE Arris C3 Proprietary Sub-Interface table | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2 | not-accessible | current | |
| dcxSubIntIpEntry OBJECT-TYPE A row in the dcxSubIntIpTable. An entry in this table exists for each IP address configured on the Sub-Interface identified by the dcxSubIntNumber | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1 | not-accessible | current | |
| dcxSubIntIpIndex OBJECT-TYPE sub-interface secondary IP address index | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.1 | Unsigned32 | not-accessible | current |
| dcxSubIntIpAddress OBJECT-TYPE a secondary ip address of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.2 | IpAddress | read-write | current |
| dcxSubIntIpMask OBJECT-TYPE a secondary ip subnet mask of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.3 | IpAddress | read-write | current |
| dcxSubIntIpBCastAddress OBJECT-TYPE a secondary ip subnet broadcast address of sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.4 | IpAddress | read-write | current |
| dcxSubIntIpAddressType OBJECT-TYPE primary(1): address is the primary address on the sub-interface, only one allowed secondary(2):address is one of the secondary addresses configured on the sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.5 | INTEGER {primary(1), secondary(2)} | read-write | current |
| dcxSubIntIpStatus OBJECT-TYPE Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.6 | RowStatus | read-create | current |
| dcxSubIntCableHelperTable OBJECT-TYPE Arris C3 Proprietary Sub-Interface Cable Helper Table | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3 | not-accessible | current | |
| dcxSubIntCableHelperEntry OBJECT-TYPE A row in the dcxSubIntCableHelperTable. An entry in this table exists for each cable helper IP address configured on the Sub-Interface which is identified using the dcxSubIntNumber | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1 | not-accessible | current | |
| dcxSubIntCableHelperType OBJECT-TYPE category of cable helper address. cm(1) these helper addresses are only used when relaying DHCP packets originating from a CM. cpe(2) these helper addresses are only used when relaying DHCP packets originating from a CPE. default(0) these helper addresses are used when: - relaying DHCP packets originating from a CM when no helper address of type cm(1) is configured or - relaying DHCP packets originating from a CPE when no helper address of type cpe(2) is configured | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.1 | INTEGER {default(0), cm(1), cpe(2)} | not-accessible | current |
| dcxSubIntCableHelperIndex OBJECT-TYPE sub-interface cable helper index | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.2 | Unsigned32 | not-accessible | current |
| dcxSubIntCableHelperIpAddress OBJECT-TYPE cable helper ip address configured on sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.3 | IpAddress | read-write | current |
| dcxSubIntCableHelperStatus OBJECT-TYPE Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. Entries in this table can only be created or deleted, no modification is possible. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.4 | RowStatus | read-create | current |
| dcxSubIntVlanTagTable OBJECT-TYPE Arris C3 Proprietary Sub-Interface Vlan Tag Table | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4 | not-accessible | current | |
| dcxSubIntVlanTagEntry OBJECT-TYPE A row in the dcxSubIntVlanTagTable. An entry in this table exists for each Vlan tag that is configured on the sub-interface (which is identified using the dcxSubIntNumber) | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1 | not-accessible | current | |
| dcxSubIntVlanTag OBJECT-TYPE sub-interface Vlan Tag value, 0 indicates no tag | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.1 | Unsigned32 (0..4094) | not-accessible | current |
| dcxSubIntVlanNative OBJECT-TYPE sub-interface will not generate packets with tags when native is configured | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.2 | TruthValue | read-write | current |
| dcxSubIntVlanIsBound OBJECT-TYPE is sub-interface tag bound to another sub-interface's VLAN tag | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.3 | TruthValue | read-write | current |
| dcxSubIntBoundVlanSlotIndex OBJECT-TYPE slot index of VLAN tag that dcxSubIntVlanTag is bound to -1 when VLAN not bound to another VLAN tag on another sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.4 | Integer32 (-1..4094) | read-write | current |
| dcxSubIntBoundVlanPortIndex OBJECT-TYPE port index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.5 | Integer32 (-1..4094) | read-write | current |
| dcxSubIntBoundVlanSubIntIndex OBJECT-TYPE sub interface index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.6 | Integer32 (-1..4094) | read-write | current |
| dcxSubIntBoundVlanTag OBJECT-TYPE sub-interface Vlan Tag value, 0 indicates no tag | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.7 | Unsigned32 (0..4094) | read-write | current |
| dcxSubIntBoundVlanNative OBJECT-TYPE bound sub-interface will not generate packets with tags when native is configured FLASE will be returned when VLAN not bound to another VLAN tag on another sub-interface | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.8 | TruthValue | read-write | current |
| dcxSubIntVlanTagStatus OBJECT-TYPE Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active. | 1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.9 | RowStatus | read-create | current |