ARRIS-C3-MAC-MIB
- Registered at
- 1.3.6.1.4.1.4115.1.4.3.6
- Last updated
- 2004-12-03 00:00
- Organization
- Arris International
- Revisions
- 2004-11-21 00:00, 2004-11-26 00:00, 2004-12-03 00:00
- Namespace
- arris
- Source file
ARRIS-C3-MAC-MIB- Digest
sha256:dfc03855d5117e54649945674f49144330c8671ebf9720e05e8c87df0dee9299
Description
This MIB manages the MAC software on the Cadant C3 CMTS.
Contact
Network Management Postal: Arris International. 4400 Cork Airport Business Park Cork Airport, Kinsale Road Cork, Ireland. Tel: +353 21 7305 800 Fax: +353 21 4321 972
Imports
| From | Symbols |
|---|---|
| ARRIS-MIB | cmtsC3 |
| DOCS-IF-MIB | TenthdB, TenthdBmV |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARRIS-C3-MAC-MIB ARRIS-MIB DOCS-IF-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DocsisMacType TEXTUAL-CONVENTION Indicates the DOCSIS Channel Type. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dcxMACObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4115.1.4.3.6.1 | |||
| dcxMACCmtsMacTable OBJECT-TYPE Additional columns for docsIfCmtsMacTable. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). | 1.3.6.1.4.1.4115.1.4.3.6.1.1 | not-accessible | current | |
| dcxMACCmtsMacEntry OBJECT-TYPE dcxMACCmtsMacEntry | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1 | not-accessible | current | |
| dcxMACCmtsMacMode OBJECT-TYPE Indicates the mode in which the MAC is operating. A read to this value may return any of the modes defined by DocsisMacType. Only the modes docsis, euroDocsis and mixed may be written. When set to docsis or euroDocsis, all downstream and upstream channels in this MAC domain will be configured in DOCSIS or EuroDOCSIS mode respectively. When set to mixed, the downstream channels will be configured in DOCSIS and the upstream channels will be running in EuroDOCSIS mode. The value custom will be returned in a read operation if any of the underlying channels has been reconfigured in such a way that the MAC can not be described a docsis, euroDocsis or mixed. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.1 | DocsisMacType | read-write | current |
| dcxMACCableAdvanceType OBJECT-TYPE Cable Map Advance Type - 0 for Static, 1 for Dynamic. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.2 | INTEGER {static(0), dynamic(1)} | read-write | current |
| dcxMACPlantLength OBJECT-TYPE Cable Plant Length (1-way) in kilometers. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.3 | Unsigned32 (0..161) | read-write | current |
| dcxMACFlapAgingTime OBJECT-TYPE Cable Flap List Aging Time in seconds. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.4 | Unsigned32 (0..864000) | read-write | current |
| dcxMACFlapInsertTime OBJECT-TYPE Cable Flap List Insertion Time threshold in seconds. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.5 | Unsigned32 (0..86400) | read-write | current |
| dcxMACFlapMissThresh OBJECT-TYPE Cable Flap List Miss Threshold in misses. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.6 | Unsigned32 (0..12) | read-write | current |
| dcxMACFlapListSize OBJECT-TYPE Cable Flap List Maximum Number of Entries. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.8 | Unsigned32 (0..6000) | read-write | current |
| dcxMACCmOfflineAgingTime OBJECT-TYPE Cable modem offline aging time in seconds. Minimum value is 1 hour. Maximum time before aging a modem is 10 days. Default value is 24 hours. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.9 | Unsigned32 (3600..864000) | read-write | current |
| dcxMACUccMaxFailedAttempts OBJECT-TYPE Maximum number of consecutive failed channel change attempts that a modem is allowed before the CMTS decides to no longer use the modem for load balancing purposes. If a modem successfully completes a channel change before the maximum number of attempts is reached, the number of consecutive failed attempts for the modem is reset. A value of 0 indicates no limit. | 1.3.6.1.4.1.4115.1.4.3.6.1.1.1.10 | Unsigned32 | read-write | current |
| dcxMACDownstreamChannelTable OBJECT-TYPE Additional columns for docsIfDownstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128). | 1.3.6.1.4.1.4115.1.4.3.6.1.2 | not-accessible | current | |
| dcxMACDownstreamChannelEntry OBJECT-TYPE dcxMACDownstreamChannelEntry | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1 | not-accessible | current | |
| dcxMACDownChannelMacMode OBJECT-TYPE Configures the downstream to DOCSIS or EuroDOCSIS. When dcxMACDownChannelWirelessMode is disabled, changes to this will impact the downstream annex type, modulation, symbol rate and interleaver. When wireless mode is enabled, only the annex type and interleaver will be changed. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.1 | DocsisMacType | read-write | current |
| dcxMACDownChannelUpconverter OBJECT-TYPE Controls whether or not the internal upconverter is used. If set to internal, the downstream IF frequency will operate in read-only mode and will be configured internally by the CMTS based on the downstream channel configuration. If set to external, the IF frequency may be programmed to set the frequency supplied to an external upconverter via the IF output. In this mode, the downstream RF frequency and power will both return 0 when read. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.2 | INTEGER {internal(1), external(2)} | read-write | current |
| dcxMACDownChannelIfFrequency OBJECT-TYPE The IF frequency output by the modulator for this channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.3 | Integer32 (10000000..60000000) | read-write | current |
| dcxMACDownChannelWirelessMode OBJECT-TYPE Enabling this mode allows non-standard downstream modulations and symbol rates to be configured which are suitable when using the CMTS in a wireless application. Changes to dcxMACDownChannelMacMode when wireless mode is active will only impact the downstream annex type and interleaver settings. Modulation and symbol rates will only be affected when wireless mode is disabled. Disabling wireless mode will reset any non-standard modulation and symbol rates settings in order to restore a standard DOCSIS or EuroDOCSIS downstream. If a set to active fails, a license may be required to activate the feature. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.4 | INTEGER {active(1), inactive(2)} | read-write | current |
| dcxMACDownChannelSymbolRate OBJECT-TYPE Sets the downstream symbol rate. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.5 | Integer32 (1250000..6952000) | read-write | current |
| dcxMACDownChannelAlpha OBJECT-TYPE The percentage of excess bandwidth for the channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.2.1.6 | Integer32 | read-only | current |
| dcxMACUpstreamChannelTable OBJECT-TYPE Additional columns for docsIfUpstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129). | 1.3.6.1.4.1.4115.1.4.3.6.1.3 | not-accessible | current | |
| dcxMACUpstreamChannelEntry OBJECT-TYPE dcxMACUpstreamChannelEntry | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1 | not-accessible | current | |
| dcxMACUpChannelMacMode OBJECT-TYPE Indicates the mode in which this upstream is operating. A read or write to this may consist only of the values docsis or euroDocsis. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.1 | DocsisMacType | read-write | current |
| dcxMACUpChannelAmpAttenuation OBJECT-TYPE The amplifier attenuation level for this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.2 | TenthdBmV | read-write | current |
| dcxMACUpChannelIngressCancellation OBJECT-TYPE Sets the ingress noise cancellation mode for this logical channel. Not all modes may be valid for a given logical channel configuration or hardware. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.3 | INTEGER {disabled(1), tdmaOnly(2), scdmaSec(3), scdmaInc1(4), scdmaInc2(5)} | read-write | current |
| dcxMACUpChannelGroupId OBJECT-TYPE The group ID for this logical channel used to associate it with other upsteams on the same physical network. The group ID is an index into the dcxMACUpstreamGroupTable which defines common parameters for grouped upsteams. Upstreams do not have to be grouped and there may be more than one group on the same physical network. Spatially diverse upstreams should not have the same group ID. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.4 | Unsigned32 | read-write | current |
| dcxMACUpChannelShortPollInterval OBJECT-TYPE The short interval for initial unicast maintanance on this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.5 | TimeInterval (1..100) | read-write | current |
| dcxMACUpChannelPeriodicPollInterval OBJECT-TYPE The periodic station maintanance interval on this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.6 | TimeInterval (100..10000) | read-write | current |
| dcxMACUpChannelInputPowerMode OBJECT-TYPE The receiver input power mode for this logical channel. In fixed mode the input power to the demodulator will remain fixed across symbol rate changes. In automatic mode the demodulator may vary the input power for optimal performance. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.7 | INTEGER {fixed(1), automatic(2)} | read-write | current |
| dcxMACUpChannelPower OBJECT-TYPE The nominal receiver input power for this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.8 | TenthdBmV | read-write | current |
| dcxMACUpChannelPlantLength OBJECT-TYPE The cable length in km to the most distant CM on this logical upstream. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.9 | Unsigned32 (1..320) | read-write | current |
| dcxMACUpChannelMaxCmMapProcTime OBJECT-TYPE The maximum time in microseconds allowed for modems on this logical channel to process the Upstream Bandwidth Allocation MAP. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.10 | Unsigned32 (0..1000000) | read-write | current |
| dcxMACUpChannelConcatenation OBJECT-TYPE Enables or disables the use of packet concatenation by Cable Modems on this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.11 | TruthValue | read-write | current |
| dcxMACUpChannelSpMgtTriggerIndex OBJECT-TYPE An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same logical upstream channel or group. Returns 0 if there are no triggers assigned to this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.12 | Unsigned32 (0..255) | read-write | current |
| dcxMACUpChannelLowPowerOffset OBJECT-TYPE The maximum power offset of a burst below the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from -10 dBmV to -1 dBmV in 1 dB increments. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.13 | TenthdBmV (-100..-10) | read-write | current |
| dcxMACUpChannelHighPowerOffset OBJECT-TYPE The maximum power offset of a burst above the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from +1 dBmV to +10 dBmV in 1 dB increments. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.14 | TenthdBmV (10..100) | read-write | current |
| dcxMACUpChannelLogSnrAveTimeconstant OBJECT-TYPE The averaging timeconstant used to calculate the per-logical channel MIB variable docsIfSigQSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0 | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.15 | Unsigned32 (0..10) | read-write | current |
| dcxMACUpChannelImpulseMitigation OBJECT-TYPE Enables or disables impulse noise mitigation for this logical channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.16 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| dcxMACUpChannelRngPreambleGuardSymbols OBJECT-TYPE Number of guard symbols before the preamble pilot pattern for ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.17 | Unsigned32 | read-write | current |
| dcxMACUpChannelNrngPreambleGuardSymbols OBJECT-TYPE Number of guard symbols before the preamble pilot pattern for non-ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.18 | Unsigned32 | read-write | current |
| dcxMACUpChannelExtendedFrequencyErrorDetect OBJECT-TYPE Offsets in carrier frequency in the modem are corrected by the CMTS during ranging. Typically most if not all off the frequency error is removed in the initial ranging response with incremental changes removed during periodic ranging. If large frequency offsets are expected during initial or periodic ranging, this value may be configured to provide extended frequency offset detection and correction. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.19 | INTEGER {none(0), initialRanging(1), periodicRanging(2), allRanging(3)} | read-write | current |
| dcxMACUpChannelLogC3SnrTimeconstant OBJECT-TYPE The averaging timeconstant used to calculate the per-logical channel MIB variable dcxMACUpChannelSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0 | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.20 | Unsigned32 | read-write | current |
| dcxMACUpChannelSignalNoise OBJECT-TYPE A measurement of the average signal/noise ratio for the logical upstream. The averaging may be controlled using the dcxMACUpChannelLogC3SnrTimeconstant variable | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.21 | TenthdB | read-only | current |
| dcxMACUpChannelSafeConfig OBJECT-TYPE If true, MIB SETs which would cause this logical channel to go offline will return a failure | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.22 | TruthValue | read-write | current |
| dcxMACUpChannelInitialRangingDelay OBJECT-TYPE The number of extra microseconds to allow in a broadcast IUC3 grant to compensate for modems that perform initial ranging later than expected. | 1.3.6.1.4.1.4115.1.4.3.6.1.3.1.23 | Unsigned32 (300..3000) | read-write | current |
| dcxMACUpstreamGroupTable OBJECT-TYPE Entries containing definitions for group IDs that can be associated with an upstream channel. | 1.3.6.1.4.1.4115.1.4.3.6.1.4 | not-accessible | current | |
| dcxMACUpstreamGroupEntry OBJECT-TYPE dcxMACUpstreamGroupEntry | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1 | not-accessible | current | |
| dcxMACUpstreamGroupId OBJECT-TYPE The ID for this group. | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.1 | Unsigned32 (1..255) | not-accessible | current |
| dcxMACUpstreamGroupName OBJECT-TYPE The name associated with this group | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.2 | OCTET STRING (SIZE(1..63)) | read-create | current |
| dcxMACUpstreamGroupLoadBalancing OBJECT-TYPE Configures upstream load balancing for the group. Options are: none, initialNumeric, periodic. If set to none, no load balancing will be performed. If set to initialNumeric, the CMTS may redirect modems to other active upstream channels in the same group by setting the upstream channel ID override in the RNG-RSP at any time up to the point where the modem successfully completes periodic ranging. Once a modem has completed ranging it must be reset before it may be moved to another upstream. The modems in a group will be distributed evenly and numerically across the active channels in the group. When a modems performs initial ranging, it will be sent to the upsteam with the least number of active modems if the number of active modems on the current upsteam is greater than the average number of modems per upsteam in the group. All channels are treated equally when calculating loads. If a modem fails to range on the desired channel following a ranging overide, it will be allowed to remain on the channel on which it next performs initial ranging. If set to periodic, modems will be numerically distributed during initial ranging and then selectively moved after registration using UCC. Periodic load balancing will attempt to distribute the modems to maintain even bandwidth utilization across the channels in a group. | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.3 | INTEGER {none(1), initialNumeric(2), periodic(3)} | read-create | current |
| dcxMACUpstreamGroupFrequencyIndex OBJECT-TYPE An index into upstream frequency table, identical to dcxMACUpstreamFrequencyIndex in that table. All entries with the same value of dcxMACUpstreamFrequencyIndex form a spectral frequency group all assigned to the same upstream group. Returns 0 if there are no triggers assigned to this group. | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.4 | Unsigned32 (0..255) | read-create | current |
| dcxMACUpstreamGroupSpMgtTriggerIndex OBJECT-TYPE An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same upstream group or channel. Returns 0 if there are no triggers assigned to this group. | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.5 | Unsigned32 (0..255) | read-create | current |
| dcxMACUpstreamGroupStatus OBJECT-TYPE Used to create rows in this table | 1.3.6.1.4.1.4115.1.4.3.6.1.4.1.6 | RowStatus | read-create | current |
| dcxMACUpstreamFrequencyTable OBJECT-TYPE Describes the upstream spectrum available for use by one or more upstream groups. Entries are grouped by dcxMACUpstreamFrequencyIndex, with each group assigned to one or more upstream groups. | 1.3.6.1.4.1.4115.1.4.3.6.1.5 | not-accessible | current | |
| dcxMACUpstreamFrequencyEntry OBJECT-TYPE Describes a single contiguous region of upstream spectrum, available for use by one or more upstream spectral groups. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1 | not-accessible | current | |
| dcxMACUpstreamFrequencyIndex OBJECT-TYPE An index into the upstream frequency table representing a group of spectral regions, all associated with the same upstream spectral group. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1.1 | Unsigned32 (1..255) | not-accessible | current |
| dcxMACUpstreamFrequencyRegion OBJECT-TYPE An index into the upstream frequency table which, when grouped with other frequency regions with the same frequency index fully describe the upstream frequency spectrum available for use by a given spectral group. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1.2 | Unsigned32 (1..255) | not-accessible | current |
| dcxMACUpstreamFrequencyStart OBJECT-TYPE The start frequency for this upstream spectral region. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1.3 | Integer32 | read-create | current |
| dcxMACUpstreamFrequencyStop OBJECT-TYPE The stop frequency for this upstream spectral region. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1.4 | Integer32 | read-create | current |
| dcxMACUpstreamFrequencyStatus OBJECT-TYPE Used to create entries in this table. | 1.3.6.1.4.1.4115.1.4.3.6.1.5.1.5 | RowStatus | read-create | current |
| dcxMACSpectralMgtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4115.1.4.3.6.1.6 | |||
| dcxMACSpectralMgtTriggerTable OBJECT-TYPE Describes the spectral management triggers assigned to one or more upstream groups or channels. Entries are grouped by dcxMACSpMgtTriggerIndex, with each group assigned to one or more upstream channels or groups. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1 | not-accessible | current | |
| dcxMACSpectralMgtTriggerEntry OBJECT-TYPE Describes a single spectral management trigger, available for use by one or more upstream channels or spectral groups. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1 | not-accessible | current | |
| dcxMACSpMgtTriggerIndex OBJECT-TYPE An index into the spectral managment trigger table representing a group of triggers, all assigned to the same upstream channel or spectral group. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.1 | Unsigned32 (0..255) | not-accessible | current |
| dcxMACSpMgtTriggerNumber OBJECT-TYPE An index into the spectral managment trigger table which, when grouped with other triggers with the same trigger index fully describe the spectral mangement triggers assigned to the same upstream channel or spectral group. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.2 | Unsigned32 (1..255) | not-accessible | current |
| dcxMACSpMgtTriggerType OBJECT-TYPE Identifies the trigger type represented by this entry. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.3 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerAction OBJECT-TYPE An index into the spectral management action table, identical to dcxMACSpMgtActionIndex in that table, identifying the action to take if this trigger is invoked. Returns 0 if there is no action associated with this trigger. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.4 | Unsigned32 (1..255) | read-create | current |
| dcxMACSpMgtTriggerParam1 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.5 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam2 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.6 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam3 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.7 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam4 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.8 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam5 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.9 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam6 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.10 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam7 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.11 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerParam8 OBJECT-TYPE Parameter dependent on trigger type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.12 | Integer32 | read-create | current |
| dcxMACSpMgtTriggerStatus OBJECT-TYPE Used to create and control the status of entries in this table. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.13 | RowStatus | read-create | current |
| dcxMACSpectralMgtActionTable OBJECT-TYPE Describes the spectral management actions assigned to one or more spectral managment triggers. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2 | not-accessible | current | |
| dcxMACSpectralMgtActionEntry OBJECT-TYPE Describes a single spectral management action, assigned to one or more spectral management triggers. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1 | not-accessible | current | |
| dcxMACSpMgtActionIndex OBJECT-TYPE An index into the spectral managment actions table used to assign actions to spectral management triggers. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.1 | Unsigned32 (1..255) | not-accessible | current |
| dcxMACSpMgtActionType OBJECT-TYPE Identifies the action type represented by this entry. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.2 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam1 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.3 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam2 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.4 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam3 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.5 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam4 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.6 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam5 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.7 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam6 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.8 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam7 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.9 | Integer32 | read-create | current |
| dcxMACSpMgtActionParam8 OBJECT-TYPE Parameter dependent on action type. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.10 | Integer32 | read-create | current |
| dcxMACSpMgtActionStatus OBJECT-TYPE Used to create and control the status of entries in this table. | 1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.11 | RowStatus | read-create | current |
| dcxMACSharedSecretTable OBJECT-TYPE Set up shared secrets for this DOCSIS MAC Interface | 1.3.6.1.4.1.4115.1.4.3.6.1.7 | not-accessible | current | |
| dcxMACSharedSecretEntry OBJECT-TYPE dcxMACSharedSecretEntry | 1.3.6.1.4.1.4115.1.4.3.6.1.7.1 | not-accessible | current | |
| dcxMACSharedSecretId OBJECT-TYPE ID for the associated shared secret. | 1.3.6.1.4.1.4115.1.4.3.6.1.7.1.1 | Integer32 (1..16) | not-accessible | current |
| dcxMACSharedSecretStr OBJECT-TYPE This is the shared secret itself, which is considered write-only. It can be SET but when a GET operation is performed the value is not returned. | 1.3.6.1.4.1.4115.1.4.3.6.1.7.1.2 | DisplayString | read-create | current |
| dcxMACSharedSecretStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.4115.1.4.3.6.1.7.1.3 | RowStatus | read-create | current |