MIBs Depot

AP80-PRIVATE-MIB

Registered at
1.3.6.1.4.1.14823
Namespace
arubaos
Source file
AP80-PRIVATE-MIB
Digest
sha256:a13a27fb5c618bade767d92ed2664d52516700b1e1660d5648d6d0ae59ccacf7

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso, mgmt
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AP80-PRIVATE-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.14823.1productsARUBA-MIB
1.3.6.1.4.1.14823.2arubaEnterpriseMibModules
1.3.6.1.4.1.14823.3arubaMgmtARUBA-MIB
1.3.6.1.4.1.14823.4arubaPkiARUBA-MIB

Textual conventions

NameOIDSyntaxAccessStatus
DisplayString
type
MacAddress
type
TruthValue
type

Objects

NameOIDSyntaxAccessStatus
aruba
OBJECT-IDENTITY
1.3.6.1.4.1.14823
arubaEnterpriseMibModules
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2
arubaAp
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3
wlsrOutDoorApMibModules
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2
enterpriseApSys
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.1
swHardwareVer
OBJECT-TYPE
Hardware version of the main board.
1.3.6.1.4.1.14823.2.3.2.1.1DisplayString (SIZE(0..20))read-onlycurrent
swBootRomVer
OBJECT-TYPE
Boot ROM code version of the main board.
1.3.6.1.4.1.14823.2.3.2.1.2DisplayString (SIZE(0..20))read-onlycurrent
swOpCodeVer
OBJECT-TYPE
Operation code version of the main board.
1.3.6.1.4.1.14823.2.3.2.1.3DisplayString (SIZE(0..20))read-onlycurrent
swSerialNumber
OBJECT-TYPE
Serial Number of the Access Point.
1.3.6.1.4.1.14823.2.3.2.1.4DisplayString (SIZE(0..20))read-onlycurrent
sysNotificationTree
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.1.5
sysNotificationObjects
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.1.5.1
sysNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.1.5.2
enterpriseApLineMgnt
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.2
lineTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each RS-232 line in this system
1.3.6.1.4.1.14823.2.3.2.2.1not-accessiblecurrent
lineEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one RS232 line of the Access Point.
1.3.6.1.4.1.14823.2.3.2.2.1.1not-accessiblecurrent
lineIndex
OBJECT-TYPE
This is defined as RS-232 index.
1.3.6.1.4.1.14823.2.3.2.2.1.1.1Integer32not-accessiblecurrent
lineDataBits
OBJECT-TYPE
This is defined as number of data bits for the RS232 interface.
1.3.6.1.4.1.14823.2.3.2.2.1.1.2Integer32read-onlycurrent
lineParity
OBJECT-TYPE
This is defined as parity of the RS232 interface.
1.3.6.1.4.1.14823.2.3.2.2.1.1.3INTEGER {odd(1), even(2), none(99)}read-onlycurrent
lineSpeed
OBJECT-TYPE
This is defined as the speed of the RS-232 interface.
1.3.6.1.4.1.14823.2.3.2.2.1.1.4Integer32read-onlycurrent
lineStopBits
OBJECT-TYPE
This is defined as the number of stop bits for the RS-232 interface.
1.3.6.1.4.1.14823.2.3.2.2.1.1.5Integer32read-onlycurrent
enterpriseApPortMgnt
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.3
portTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
1.3.6.1.4.1.14823.2.3.2.3.1not-accessiblecurrent
portEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one switch port of the switch.
1.3.6.1.4.1.14823.2.3.2.3.1.1not-accessiblecurrent
portIndex
OBJECT-TYPE
This is defined as ifIndex in the IF-MIB.
1.3.6.1.4.1.14823.2.3.2.3.1.1.1Integer32not-accessiblecurrent
portName
OBJECT-TYPE
Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
1.3.6.1.4.1.14823.2.3.2.3.1.1.2DisplayString (SIZE(0..64))read-onlycurrent
portType
OBJECT-TYPE
Indicates the port type.
1.3.6.1.4.1.14823.2.3.2.3.1.1.3INTEGER {other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8)}read-onlycurrent
portSpeedDpxCfg
OBJECT-TYPE
Indicates the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
1.3.6.1.4.1.14823.2.3.2.3.1.1.4INTEGER {reserved(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)}read-onlycurrent
portFlowCtrlCfg
OBJECT-TYPE
(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
1.3.6.1.4.1.14823.2.3.2.3.1.1.5INTEGER {enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4)}read-onlycurrent
portCapabilities
OBJECT-TYPE
Port capabilities.
1.3.6.1.4.1.14823.2.3.2.3.1.1.6INTEGER {portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15), portCap10half(99)}read-onlycurrent
portAutonegotiation
OBJECT-TYPE
Whether autonegotiation is enabled.
1.3.6.1.4.1.14823.2.3.2.3.1.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
portSpeedDpxStatus
OBJECT-TYPE
The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
1.3.6.1.4.1.14823.2.3.2.3.1.1.8INTEGER {error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)}read-onlycurrent
portFlowCtrlStatus
OBJECT-TYPE
(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
1.3.6.1.4.1.14823.2.3.2.3.1.1.9INTEGER {error(1), backPressure(2), dot3xFlowControl(3), none(4)}read-onlycurrent
enterpriseApFileTransferMgt
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.4
transferType
OBJECT-TYPE
Type of file to transfer.
1.3.6.1.4.1.14823.2.3.2.4.1INTEGER {ftp(1), tftp(2)}read-writecurrent
fileType
OBJECT-TYPE
Type of file to transfer.
1.3.6.1.4.1.14823.2.3.2.4.2INTEGER {application(1), config(2), bootcode(3)}read-writecurrent
srcFile
OBJECT-TYPE
The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
1.3.6.1.4.1.14823.2.3.2.4.3DisplayString (SIZE(0..127))read-writecurrent
destFile
OBJECT-TYPE
The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
1.3.6.1.4.1.14823.2.3.2.4.4DisplayString (SIZE(0..127))read-writecurrent
fileServer
OBJECT-TYPE
The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
1.3.6.1.4.1.14823.2.3.2.4.5IpAddressread-writecurrent
userName
OBJECT-TYPE
The username specified for an FTP Transfer.
1.3.6.1.4.1.14823.2.3.2.4.6DisplayString (SIZE(0..127))read-writecurrent
password
OBJECT-TYPE
The password specified for an FTP Transfer.
1.3.6.1.4.1.14823.2.3.2.4.7DisplayString (SIZE(0..127))read-writecurrent
status
OBJECT-TYPE
The status of the transfer.
1.3.6.1.4.1.14823.2.3.2.4.8INTEGER {running(1), success(2), failureGeneric(3), flashOpenError(10), flashMallocError(11), flashReadError(12), flashFtypeError(13), socketWriteError(20), protocolError(30)}read-onlycurrent
transferStart
OBJECT-TYPE
Set to go(1) to start a transfer.
1.3.6.1.4.1.14823.2.3.2.4.9INTEGER {nothing(0), download(1), upload(2)}read-writecurrent
enterpriseApResetMgt
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.5
restartOpCodeFile
OBJECT-TYPE
Name of op-code file for start-up.
1.3.6.1.4.1.14823.2.3.2.5.1DisplayString (SIZE(0..127))read-writecurrent
restartControl
OBJECT-TYPE
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
1.3.6.1.4.1.14823.2.3.2.5.2INTEGER {running(1), warmBoot(2), coldBoot(3)}read-writecurrent
enterpriseApIpMgt
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.6
netConfigIPAddress
OBJECT-TYPE
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
1.3.6.1.4.1.14823.2.3.2.6.1IpAddressread-writecurrent
netConfigSubnetMask
OBJECT-TYPE
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
1.3.6.1.4.1.14823.2.3.2.6.2IpAddressread-writecurrent
netConfigDefaultGateway
OBJECT-TYPE
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
1.3.6.1.4.1.14823.2.3.2.6.3IpAddressread-writecurrent
netConfigHttpState
OBJECT-TYPE
Whether HTTP is enabled.
1.3.6.1.4.1.14823.2.3.2.6.4INTEGER {enabled(1), disabled(2)}read-writecurrent
netConfigHttpPort
OBJECT-TYPE
The port number for HTTP. Default port number is 80.
1.3.6.1.4.1.14823.2.3.2.6.5INTEGER (1024..65535)read-writecurrent
netConfigHttpsState
OBJECT-TYPE
Whether Secure HTTP is enabled.
1.3.6.1.4.1.14823.2.3.2.6.6INTEGER {enabled(1), disabled(2)}read-writecurrent
netConfigHttpsPort
OBJECT-TYPE
The port number for Secure HTTP. Default port number is 443.
1.3.6.1.4.1.14823.2.3.2.6.7INTEGER (1024..65535)read-writecurrent
netConfigDHCPState
OBJECT-TYPE
Whether DHCP is enabled.
1.3.6.1.4.1.14823.2.3.2.6.8INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseAPdot11
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7
dot11AuthenticationEntry
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7.1
dot118021xState
OBJECT-TYPE
This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
1.3.6.1.4.1.14823.2.3.2.7.1.1INTEGER {disabled(0), supported(1), required(2)}read-writeobsolete
dot118021xBroadcastKeyRefreshRate
OBJECT-TYPE
The number (in minutes) between changing the broadcast key for 802.1x and WPA clients
1.3.6.1.4.1.14823.2.3.2.7.1.2INTEGER (0..1440)read-writeobsolete
dot118021xSessionKeyRefreshRate
OBJECT-TYPE
The number (in minutes) between changing session keys for 802.1x and WPA clients
1.3.6.1.4.1.14823.2.3.2.7.1.3INTEGER (0..1440)read-writeobsolete
dot118021xReauthenticationTimeout
OBJECT-TYPE
The number (in minutes) between forcing 802.1x clients to reauthenticate
1.3.6.1.4.1.14823.2.3.2.7.1.4INTEGER (0..1440)read-writeobsolete
dot11MACAuthenticationType
OBJECT-TYPE
This value indicates the type of mac authentication in use.
1.3.6.1.4.1.14823.2.3.2.7.1.5INTEGER {disabled(0), local(1), radius(2)}read-writeobsolete
dot11AuthenticationServerTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2not-accessiblecurrent
dot11AuthenticationServerEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one authentication server of the AP.
1.3.6.1.4.1.14823.2.3.2.7.2.1not-accessiblecurrent
dot11AuthenticationServerIndex
OBJECT-TYPE
Index of the Authentication Server
1.3.6.1.4.1.14823.2.3.2.7.2.1.1Integer32not-accessiblecurrent
dot11AuthenticationServer
OBJECT-TYPE
This value indicates the IP address of the authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.2IpAddressread-writecurrent
dot11AuthenticationPort
OBJECT-TYPE
This value indicates the UDP Port used by the authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.3INTEGER (1024..65535)read-writecurrent
dot11AuthenticationKey
OBJECT-TYPE
This value indicates the shared key used by the authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.4DisplayString (SIZE(0..20))read-writecurrent
dot11AuthenticationRetransmit
OBJECT-TYPE
This value indicates the retransmit timer length used by the authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.5INTEGER (1..30)read-writecurrent
dot11AuthenticationTimeout
OBJECT-TYPE
This value indicates the Timeout value(sec) used by the authentication server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.6INTEGER (1..60)read-writecurrent
dot11AuthenticationAcctPort
OBJECT-TYPE
The port number for radius server accounting.
1.3.6.1.4.1.14823.2.3.2.7.2.1.7INTEGER (1024..65535)read-writecurrent
dot11AuthenticationAcctInterimUpdate
OBJECT-TYPE
This value indicates the Timeout value(sec) used by the radius server interim update.
1.3.6.1.4.1.14823.2.3.2.7.2.1.8INTEGER (60..86400)read-writecurrent
dot11AuthenticationMACAddressFormat
OBJECT-TYPE
This value indicates the MAC address format from Radius MAC authentication. no-delimiter format: aabbccddeeff single-dash format: aabbcc-ddeeff multi-dash format: aa-bb-cc-dd-ee-ff multi-colon format: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.14823.2.3.2.7.2.1.9INTEGER {no-delimiter(1), single-dash(2), multi-dash(3), multi-colon(4)}read-writecurrent
dot11AuthenticationVLANIDFormat
OBJECT-TYPE
This value indicates the VLAN ID format from Radius server.
1.3.6.1.4.1.14823.2.3.2.7.2.1.10INTEGER {hex(1), ascii(2)}read-writecurrent
dot11MACAuthenticationFilter
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7.3
dot11FilterDefault
OBJECT-TYPE
This value indicates the default access for local mac filters.
1.3.6.1.4.1.14823.2.3.2.7.3.1INTEGER {allow(1), deny(2)}read-writecurrent
dot11FilterTable
OBJECT-TYPE
Table of status information about each configured MAC Address Filtering Entry.
1.3.6.1.4.1.14823.2.3.2.7.3.2not-accessiblecurrent
dot11FilterEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one radio of the AP.
1.3.6.1.4.1.14823.2.3.2.7.3.2.1not-accessiblecurrent
dot11FilterAddress
OBJECT-TYPE
This value indicates the MAC address of the filter entry.
1.3.6.1.4.1.14823.2.3.2.7.3.2.1.1MacAddressnot-accessiblecurrent
dot11FilterStatus
OBJECT-TYPE
This value indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client.
1.3.6.1.4.1.14823.2.3.2.7.3.2.1.2INTEGER {allowed(30), denied(31), delete(32)}read-writecurrent
dot11NotificationTree
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7.4
dot11NotificationObjects
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7.4.1
dot11MacAddr
OBJECT-TYPE
Mac Address of the affected interface, returned with traps only.
1.3.6.1.4.1.14823.2.3.2.7.4.1.1MacAddressnot-accessiblecurrent
dot11Station
OBJECT-TYPE
This attribute holds the MAC address of the wireless station
1.3.6.1.4.1.14823.2.3.2.7.4.1.2MacAddressnot-accessiblecurrent
dot11RequestType
OBJECT-TYPE
This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication
1.3.6.1.4.1.14823.2.3.2.7.4.1.3INTEGER {unknown(1), association(2), reAssociation(3), authentication(4)}not-accessiblecurrent
dot11ReasonCode
OBJECT-TYPE
This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal error Value = 4: Out of sequence frame Value = 5: Un-supportd algorithm Value = 6: Invalid frame length Value = 7: WEP is required on the AP Value = 8: WEP not allowed Value = 9: Challenge text mismatch
1.3.6.1.4.1.14823.2.3.2.7.4.1.4INTEGER {invalidModeOrState(1), unAuthenticatedStation(2), internalError(3), outOfSequenceFrame(4), unsupportedAlgorithm(5), invalidFrameLngth(6), wepRequiredOnAP(7), wepNotAllowed(8), challengeTextMismatch(9)}not-accessiblecurrent
dot11ApIpAddress
OBJECT-TYPE
This value indicates the IP address of the Access Point
1.3.6.1.4.1.14823.2.3.2.7.4.1.5IpAddressnot-accessiblecurrent
dot1xAuthenticatorMacAddr
OBJECT-TYPE
This attribute holds the MAC address of the authenticator for the AP.
1.3.6.1.4.1.14823.2.3.2.7.4.1.6MacAddressnot-accessiblecurrent
dot11Notifications
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.7.4.2
dot11AuthenticationSupplicantTable
OBJECT-TYPE
Table of descriptive and status information about configuration of supplicant
1.3.6.1.4.1.14823.2.3.2.7.5not-accessiblecurrent
dot11AuthenticationSupplicantEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one supplicant.
1.3.6.1.4.1.14823.2.3.2.7.5.1not-accessiblecurrent
dot118021xSuppIndex
OBJECT-TYPE
Index of the interface for which this supplicant is running. Currently only the ethernet interface.
1.3.6.1.4.1.14823.2.3.2.7.5.1.1Integer32not-accessiblecurrent
dot118021xSuppState
OBJECT-TYPE
This object is used to enable or disable the 802.1x supplicant.
1.3.6.1.4.1.14823.2.3.2.7.5.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
dot118021xSuppUser
OBJECT-TYPE
This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY.
1.3.6.1.4.1.14823.2.3.2.7.5.1.3DisplayString (SIZE(1..32))read-writecurrent
dot118021xSuppPasswd
OBJECT-TYPE
This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY.
1.3.6.1.4.1.14823.2.3.2.7.5.1.4DisplayString (SIZE(1..32))read-writecurrent
dot11VapAuthenticationTable
OBJECT-TYPE
Table of descriptive and status information about configuration of 8021x for each Vap.
1.3.6.1.4.1.14823.2.3.2.7.6not-accessiblecurrent
dot11VapAuthenticationEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
1.3.6.1.4.1.14823.2.3.2.7.6.1not-accessiblecurrent
dot11Vap8021xIndex
OBJECT-TYPE
Index for configuration.
1.3.6.1.4.1.14823.2.3.2.7.6.1.1Integer32not-accessiblecurrent
dot11Vap8021xState
OBJECT-TYPE
This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
1.3.6.1.4.1.14823.2.3.2.7.6.1.2INTEGER {disabled(0), supported(1), required(2)}read-writecurrent
dot11Vap8021xBroadcastKeyRefreshRate
OBJECT-TYPE
The number (in minutes) between changing the broadcast key for 802.1x and WPA clients
1.3.6.1.4.1.14823.2.3.2.7.6.1.3INTEGER (0..1440)read-writecurrent
dot11Vap8021xSessionKeyRefreshRate
OBJECT-TYPE
The number (in minutes) between changing session keys for 802.1x and WPA clients
1.3.6.1.4.1.14823.2.3.2.7.6.1.4INTEGER (0..1440)read-writecurrent
dot11Vap8021xReauthenticationTimeout
OBJECT-TYPE
The number (in minutes) between forcing 802.1x clients to reauthenticate
1.3.6.1.4.1.14823.2.3.2.7.6.1.5INTEGER (0..1440)read-writecurrent
dot11VapAuthMACAuthenticationType
OBJECT-TYPE
This value indicates the type of mac authentication in use.
1.3.6.1.4.1.14823.2.3.2.7.6.1.6INTEGER {disabled(0), local(1), remote(2)}read-writecurrent
dot11VapAuthMACAuthenticationTimeout
OBJECT-TYPE
The number (in minutes) between forcing Radius MAC to authenticate.
1.3.6.1.4.1.14823.2.3.2.7.6.1.7INTEGER (0..1440)read-writecurrent
enterpriseApAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.8
enterpriseApAdminUser
OBJECT-TYPE
This value indicates the username for management login.
1.3.6.1.4.1.14823.2.3.2.8.1DisplayString (SIZE(3..16))read-writecurrent
enterpriseApAdminPassword
OBJECT-TYPE
This value indicates the password for management login. The password length is betwen 3 and 16. 'Zero-length' indicates 'no password'.
1.3.6.1.4.1.14823.2.3.2.8.2DisplayString (SIZE(0..16))read-writecurrent
enterpriseApVLAN
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.9
enterpriseApVLANNativeId
OBJECT-TYPE
This value indicates the native VLAN id.
1.3.6.1.4.1.14823.2.3.2.9.1INTEGERread-writecurrent
enterpriseApVLANState
OBJECT-TYPE
This value indicates whether VLANs are enabled or disabled.
1.3.6.1.4.1.14823.2.3.2.9.2INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApNativeVlanTable
OBJECT-TYPE
Table used to manage the Vlans for each wireless interface.
1.3.6.1.4.1.14823.2.3.2.9.3not-accessiblemandatory
enterpriseApNativeVlanEntry
OBJECT-TYPE
An entry in the table, containing information about vlan configuration of one wireless interface.
1.3.6.1.4.1.14823.2.3.2.9.3.1not-accessiblemandatory
nativeVlanIfIndex
OBJECT-TYPE
Interface Index of the wireless interface for which the vlan is assigned to.
1.3.6.1.4.1.14823.2.3.2.9.3.1.1Integer32not-accessiblemandatory
nativeVlanSsidNumber
OBJECT-TYPE
Associated Number for Service Set Id (SSID) of the wireless interface for which the vlan is assigned to. Note: This is for future support of multiple SSIDs per radio interface.
1.3.6.1.4.1.14823.2.3.2.9.3.1.2Integer32not-accessiblemandatory
nativeVlanVlanId
OBJECT-TYPE
This value indicates the native VLAN id of the wireless interface associated with the if index and the SSID number(if it is not 0).
1.3.6.1.4.1.14823.2.3.2.9.3.1.3Integer32read-writemandatory
enterpriseApFilterControl
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.10
enterpriseApFilterControlInterClientSTAsCommun
OBJECT-TYPE
This value indicates the Inter Client STAs Communication Filter setting. disabled (1) To disable the Inter Client STAs Communication Filter PreventIntraVAPClient (2) To set filter to prevent intra VAP client communication PreventInterAndIntraVAPClient(3) To set filter to prevent inter and intra VAP client communication
1.3.6.1.4.1.14823.2.3.2.10.1INTEGER {disabled(1), PreventIntraVAPClient(2), PreventInterAndIntraVAPClient(3)}read-writecurrent
enterpriseApFilterControlAPManage
OBJECT-TYPE
This value indicates the AP management filter setting.
1.3.6.1.4.1.14823.2.3.2.10.2INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApFilterControlEthernet
OBJECT-TYPE
This value indicates the ethernet filter setting.
1.3.6.1.4.1.14823.2.3.2.10.3INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApFilterProtocolTable
OBJECT-TYPE
Table of descriptive and status information about configuration of the filter protocol table.
1.3.6.1.4.1.14823.2.3.2.10.4not-accessiblecurrent
enterpriseApFilterProtocolEntry
OBJECT-TYPE
An entry in the filter protocol table, containing information about configuration of one filter table entry.
1.3.6.1.4.1.14823.2.3.2.10.4.1not-accessiblecurrent
enterpriseApFilterProtocolIndex
OBJECT-TYPE
Index of the Protocol Filters.
1.3.6.1.4.1.14823.2.3.2.10.4.1.1Integer32not-accessiblecurrent
enterpriseApFilterProtocolName
OBJECT-TYPE
This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3
1.3.6.1.4.1.14823.2.3.2.10.4.1.2DisplayStringread-onlycurrent
enterpriseApFilterProtocolISODesignator
OBJECT-TYPE
This value indicates the name of the protocol filter.
1.3.6.1.4.1.14823.2.3.2.10.4.1.3DisplayStringread-onlycurrent
enterpriseApFilterProtocolState
OBJECT-TYPE
This value indicates whether the protocol filter is enabled.
1.3.6.1.4.1.14823.2.3.2.10.4.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApFilterUplinkPortMACAddrFilter
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.10.5
uplinkPortMACAddrFilterStatus
OBJECT-TYPE
This value indicates whether the Uplink Port MAC Address Filter Table is enabled or not.
1.3.6.1.4.1.14823.2.3.2.10.5.1INTEGER {enable(1), disabled(2)}read-writecurrent
uplinkPortMACAddrFilterAddMac
OBJECT-TYPE
To add mac address to Uplink Port MAC Address Filter Table. (Mac Address format: xx-xx-xx-xx-xx-xx or xx:xx:xx:xx:xx:xx)
1.3.6.1.4.1.14823.2.3.2.10.5.2MacAddressread-writecurrent
uplinkPortMACAddrFilteringTable
OBJECT-TYPE
Table of descriptive and status information about configuration of the Uplink Port MAC Address Filter Table.
1.3.6.1.4.1.14823.2.3.2.10.5.3not-accessiblecurrent
uplinkPortMACAddrFilteringEntry
OBJECT-TYPE
An entry in Uplink Port MAC Address Filter Table.
1.3.6.1.4.1.14823.2.3.2.10.5.3.1not-accessiblecurrent
uplinkPortMacAddrIndex
OBJECT-TYPE
The index for Uplink Port MAC Address Filter Table.
1.3.6.1.4.1.14823.2.3.2.10.5.3.1.1Integer32read-onlycurrent
uplinkPortMACAddr
OBJECT-TYPE
The MAC Address of wireless clients which allowed to communicate on subnet.
1.3.6.1.4.1.14823.2.3.2.10.5.3.1.2MacAddressread-onlycurrent
deleteMacAddr
OBJECT-TYPE
To delete the MAC Address from Uplink Port MAC Address Filter Table. Delete(1) To start delete MAC address. Nothing(2) Nothing occur.
1.3.6.1.4.1.14823.2.3.2.10.5.3.1.3INTEGER {Delete(1), Nothing(2)}read-writecurrent
enterpriseApSNTP
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.11
enterpriseApSNTPState
OBJECT-TYPE
This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled.
1.3.6.1.4.1.14823.2.3.2.11.1INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSNTPPrimaryServer
OBJECT-TYPE
This value indicates the IP address of the primary SNTP server.
1.3.6.1.4.1.14823.2.3.2.11.2IpAddressread-writecurrent
enterpriseApSNTPSecondaryServer
OBJECT-TYPE
This value indicates the IP address of the secondary SNTP server.
1.3.6.1.4.1.14823.2.3.2.11.3IpAddressread-writecurrent
enterpriseApSNTPTimezone
OBJECT-TYPE
This value indicates which timezone to use.
1.3.6.1.4.1.14823.2.3.2.11.4INTEGER {enewetakKwajalein(0), midwayIsland(1), hawaii(2), alaska(3), pacific(4), arizona(5), mountain(6), central(7), mexicoCity(8), saskatchewan(9), bogota(10), eastern(11), indiana(12), atlantic(13), caracas(14), santiago(15), newfoundland(16), brasilia(17), buenos(18), midAtlantic(19), azores(20), casablanca(21), greenwichMeanTimeDublin(22), greenwichMeanTimeLisbon(23), amsterdam(24), stockhoim(25), bratislava(26), prague(27), paris(28), sofija(29), athens(30), bucharest(31), cairo(32), harare(33), helsinki(34), israel(35), baghdad(36), moscow(37), tehran(38), abuDhabi(39), vogograd(40), islamabad(41), almaty(42), bangkok(43), beijing(44), taipei(45), tokyo(46), brisbane(47), canberra(48), guam(49), hobart(50), magadan(51), fiji(52), wellington(53)}read-writecurrent
enterpriseApSNTPDST
OBJECT-TYPE
This value indicates whether Daylight Savings Time is enabled or not.
1.3.6.1.4.1.14823.2.3.2.11.5INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSNTPDSTStartMonth
OBJECT-TYPE
This value indicates the starting month for Daylight Savings Time.
1.3.6.1.4.1.14823.2.3.2.11.6INTEGER (1..12)read-writecurrent
enterpriseApSNTPDSTStartDay
OBJECT-TYPE
This value indicates the starting day for Daylight Savings Time.
1.3.6.1.4.1.14823.2.3.2.11.7INTEGER (1..31)read-writecurrent
enterpriseApSNTPDSTEndMonth
OBJECT-TYPE
This value indicates the ending month for Daylight Savings Time.
1.3.6.1.4.1.14823.2.3.2.11.8INTEGER (1..12)read-writecurrent
enterpriseApSNTPDSTEndDay
OBJECT-TYPE
This value indicates the ending day for Daylight Savings Time.
1.3.6.1.4.1.14823.2.3.2.11.9INTEGER (1..31)read-writecurrent
sntpNotificationTree
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.11.10
sntpNotificationObjects
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.11.10.1
sntpNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.11.10.2
enterpriseApDNS
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.12
enterpriseApDNSPrimaryServer
OBJECT-TYPE
This value indicates the IP address of the primary DNS server.
1.3.6.1.4.1.14823.2.3.2.12.1IpAddressread-writecurrent
enterpriseApDNSSecondaryServer
OBJECT-TYPE
This value indicates the IP address of the secondary DNS server.
1.3.6.1.4.1.14823.2.3.2.12.2IpAddressread-writecurrent
enterpriseApSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.13
enterpriseApSyslogState
OBJECT-TYPE
This value indicates whether syslog is enabled.
1.3.6.1.4.1.14823.2.3.2.13.1INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSyslogConsoleState
OBJECT-TYPE
This value indicates whether syslog console logging is enabled.
1.3.6.1.4.1.14823.2.3.2.13.2INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSyslogLevel
OBJECT-TYPE
This value indicates the syslog logging level.
1.3.6.1.4.1.14823.2.3.2.13.3INTEGER {emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)}read-writecurrent
enterpriseApSyslogServerTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each syslog server.
1.3.6.1.4.1.14823.2.3.2.13.4not-accessiblecurrent
enterpriseApSyslogServerEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one syslog server of the AP.
1.3.6.1.4.1.14823.2.3.2.13.4.1not-accessiblecurrent
enterpriseApSyslogServerIndex
OBJECT-TYPE
Index of the Syslog Server
1.3.6.1.4.1.14823.2.3.2.13.4.1.1Integer32not-accessiblecurrent
enterpriseApSyslogServerState
OBJECT-TYPE
This value indicates whether the syslog server is enabled.
1.3.6.1.4.1.14823.2.3.2.13.4.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSyslogServerIPAddress
OBJECT-TYPE
This value indicates the IP address of the syslog server.
1.3.6.1.4.1.14823.2.3.2.13.4.1.3IpAddressread-writecurrent
enterpriseApSyslogServerPort
OBJECT-TYPE
This value indicates the UDP Port used by the syslog server.
1.3.6.1.4.1.14823.2.3.2.13.4.1.4INTEGER (1024..65535)read-writecurrent
enterpriseApSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.14
enterpriseApSecurityTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each radio in terms of security settings.
1.3.6.1.4.1.14823.2.3.2.14.1not-accessiblecurrent
enterpriseApSecurityEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one radio of the AP.
1.3.6.1.4.1.14823.2.3.2.14.1.1not-accessiblecurrent
enterpriseApSecurityIndex
OBJECT-TYPE
Radio Index for security settings.
1.3.6.1.4.1.14823.2.3.2.14.1.1.1Integer32not-accessiblecurrent
enterpriseApSecurityAuthType
OBJECT-TYPE
This value indicates the type of authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode
1.3.6.1.4.1.14823.2.3.2.14.1.1.2INTEGER {opensystem(0), sharedkey(1), wpa(2), wpapsk(3), wpawpa2mixed(4), wpawpa2pskmixed(5), wpa2(6), wpa2psk(7)}read-writecurrent
enterpriseApSecuritySharedKeyLen
OBJECT-TYPE
This value indicates the shared key length for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.3INTEGER {none(0), sixtyFour(1), oneHundredTwentyEight(2), oneHundredFiftyTwo(3)}read-onlycurrent
enterpriseApSecurityWPAMode
OBJECT-TYPE
This value indicates the state of WPA for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.4INTEGER {supported(0), required(1), disabled(2)}read-writecurrent
enterpriseApSecurityWPAKeyType
OBJECT-TYPE
This value indicates the type of WPA Key Management in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.5INTEGER {dot1x(0), presharedkey(1)}read-writecurrent
enterpriseApSecurityWPACipher
OBJECT-TYPE
This value indicates the type of WPA Cipher in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.6INTEGER {wep(0), tkip(1), aes(2)}read-writeobsolete
enterpriseApSecurityWPAPSKType
OBJECT-TYPE
This value indicates the type of WPA Pre Shared Key in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.7INTEGER {hex(0), alphanumeric(1)}read-writecurrent
enterpriseApSecurityWPAPSK
OBJECT-TYPE
This value indicates WPA Pre Shared Key in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.8DisplayString (SIZE(0..80))read-writecurrent
enterpriseApSecurityWEPKeyType
OBJECT-TYPE
This value indicates the type of WEP Key in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.9INTEGER {hexadecimal(0), alphanumeric(1)}read-writecurrent
enterpriseApSecurityWEPEnabled
OBJECT-TYPE
This value indicates whether WEP is enabled.
1.3.6.1.4.1.14823.2.3.2.14.1.1.10TruthValueread-writecurrent
enterpriseApSecurityWPACipherSuite
OBJECT-TYPE
This value indicates the type of WPA Cipher Suite in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.14.1.1.11INTEGER {aes-ccmp(0), tkip(1), wep(2)}read-writecurrent
enterpriseApSecurityWPAPreAuthentication
OBJECT-TYPE
Whether Pre-Authentication is enabled.
1.3.6.1.4.1.14823.2.3.2.14.1.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSecurityWPAPmksaLifetime
OBJECT-TYPE
The number (in minutes) for Pmksa-Lifetime.
1.3.6.1.4.1.14823.2.3.2.14.1.1.13INTEGER (0..14400)read-writecurrent
enterpriseApSsh
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.14.2
enterpriseApSshServerEnabled
OBJECT-TYPE
This value indicates whether SSH server is enabled.
1.3.6.1.4.1.14823.2.3.2.14.2.1TruthValueread-writemandatory
enterpriseApSshServerPort
OBJECT-TYPE
This value indicates SSH server's port number.
1.3.6.1.4.1.14823.2.3.2.14.2.2Integer32read-writemandatory
enterpriseApSshTelnetServerEnabled
OBJECT-TYPE
This value indicates whether telnet server is enabled.
1.3.6.1.4.1.14823.2.3.2.14.2.3TruthValueread-writemandatory
enterpriseApRadio
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.15
enterpriseApRadioTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each radio.
1.3.6.1.4.1.14823.2.3.2.15.1not-accessiblecurrent
enterpriseApRadioEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one radio of the AP.
1.3.6.1.4.1.14823.2.3.2.15.1.1not-accessiblecurrent
enterpriseApRadioIndex
OBJECT-TYPE
Radio Index for configuration.
1.3.6.1.4.1.14823.2.3.2.15.1.1.1Integer32not-accessiblecurrent
enterpriseApRadioState
OBJECT-TYPE
This value indicates the state of the radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.2INTEGER {enabled(1), disabled(2)}read-writeobsolete
enterpriseApRadioAutoChannel
OBJECT-TYPE
This value indicates whether auto channel selection is enabled or not for this radio interface
1.3.6.1.4.1.14823.2.3.2.15.1.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApRadioTransmitPower
OBJECT-TYPE
This value indicates the transmit power for this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.4INTEGER {min(0), eighth(1), quarter(2), half(3), full(4)}read-writecurrent
enterpriseApRadioClosedSystem
OBJECT-TYPE
This value indicates whether closed system is enabled for this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.5INTEGER {enabled(1), disabled(2)}read-writeobsolete
enterpriseApRadioMaxAssoc
OBJECT-TYPE
This value indicates the max number of clients allowed on this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.6INTEGER (1..64)read-writeobsolete
enterpriseApRadioTransmitKey
OBJECT-TYPE
This value indicates default transmit key in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.7INTEGER (1..4)read-writeobsolete
enterpriseApRadioTurboMode
OBJECT-TYPE
This value indicates whether turbo mode is enabled for this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.8INTEGER {disabled(1), static-turbo(2), dynamic-turbo(3)}read-writecurrent
enterpriseApRadioDescription
OBJECT-TYPE
This value indicates the description for this radio interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.9DisplayString (SIZE(0..80))read-writeobsolete
enterpriseApRadioDataRate
OBJECT-TYPE
This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best data rate for the interface
1.3.6.1.4.1.14823.2.3.2.15.1.1.10INTEGER {oneMbps(1), twoMbps(2), fiveAndHalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fourtyEightMbps(48), fiftyFourMbps(54), auto(255)}read-writecurrent
enterpriseApRadioGMode
OBJECT-TYPE
This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.11INTEGER {bOnly(1), gOnly(2), bg(3)}read-writecurrent
enterpriseApRadioAntennaMode
OBJECT-TYPE
This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: fixed(1) means use both built-in antennas, external(2) means use one external antenna on the right side. This setting is only valid for the 802.11g interface.
1.3.6.1.4.1.14823.2.3.2.15.1.1.12INTEGER {fixed(1), external(2)}read-writemandatory
enterpriseApRadioAntennaId
OBJECT-TYPE
1.3.6.1.4.1.14823.2.3.2.15.1.1.13DisplayStringread-onlycurrent
enterpriseApRadioAntennaControlMethod
OBJECT-TYPE
This value indicates the antenna control method for the radio index. Diversity(1) AP select the antenna automatically. Left (2) Use the left antenna. Right (3) Use the right antenna.
1.3.6.1.4.1.14823.2.3.2.15.1.1.14INTEGER {Diversity(1), Left(2), Right(3)}read-writecurrent
enterpriseApRadioAntennaLocation
OBJECT-TYPE
This value indicates the location of antenna for each radio index.
1.3.6.1.4.1.14823.2.3.2.15.1.1.15INTEGER {Indoor(1), Outdoor(2)}read-writecurrent
enterpriseApRadioRogueApDetection
OBJECT-TYPE
The status of Rogue AP detection for each index. enabled(1) To set rogue Ap detection enabled. disabled(2) To set rogue Ap detection disabled.
1.3.6.1.4.1.14823.2.3.2.15.1.1.16INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApRadioRogueApScanInterval
OBJECT-TYPE
This value indicates the interval between each rogue AP scan.(unit: minutes)
1.3.6.1.4.1.14823.2.3.2.15.1.1.17Integer32 (30..10080)read-writecurrent
enterpriseApRadioRogueApScanDuration
OBJECT-TYPE
This value indicates the rogue AP scan duratoin.(unit: minutes)
1.3.6.1.4.1.14823.2.3.2.15.1.1.18Integer32 (100..1000)read-writecurrent
enterpriseApRadioRogueApScanNow
OBJECT-TYPE
To force Ap to do rogue AP scan right away. enabled(1) To do Rogue AP scan right now. disabled(2) To set rogue Ap.
1.3.6.1.4.1.14823.2.3.2.15.1.1.19INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApRadioMICMode
OBJECT-TYPE
This value indicates the MIC mode status for this radio index. software(1) To set MIC mode to software. hardware(2) To set MIC mode to hardware.
1.3.6.1.4.1.14823.2.3.2.15.1.1.21INTEGER {software(1), hardware(2)}read-writecurrent
enterpriseApRadioSuperMode
OBJECT-TYPE
This value indicates the super mode status for this radio index. enabled (1) To set super mode enabled. disabled(2) To set super mode disabled.
1.3.6.1.4.1.14823.2.3.2.15.1.1.22INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApRadioBeaconInterval
OBJECT-TYPE
This value indicates the beacon interval for this radio index.
1.3.6.1.4.1.14823.2.3.2.15.1.1.23Integer32 (20..1000)read-writecurrent
enterpriseApRadioDataBeaconRate
OBJECT-TYPE
This value indicates the data beacon rate for the radio index.
1.3.6.1.4.1.14823.2.3.2.15.1.1.24Integer32read-writecurrent
enterpriseApRadioChannel
OBJECT-TYPE
This valud indicates the radio channel for the radio index. set channel 42/50/58/152/160 for static turbo mode, set channel 40/48/56/153/161 for dynamic turbo mode, set channel 36/40/44/48/52/56/60/64/149/153/157/161/165 when turbo mode is disabled. The value '0' indicates the radio interface cannot be enable in current country code.
1.3.6.1.4.1.14823.2.3.2.15.1.1.25Integer32read-writecurrent
enterpriseApRadioFragmentLength
OBJECT-TYPE
This value indicates the fragment length for the radio index.(unit: Byte)
1.3.6.1.4.1.14823.2.3.2.15.1.1.26Integer32 (256..2346)read-writecurrent
enterpriseApRadioRTSThreshold
OBJECT-TYPE
This value indicates the RTS Threshold for the radio index.(unit: Byte)
1.3.6.1.4.1.14823.2.3.2.15.1.1.27Integer32 (0..2347)read-writecurrent
enterpriseApRadioAntennaGainReduction
OBJECT-TYPE
This value indicates the antenna gain reduction for the radio index.(unit: dB)
1.3.6.1.4.1.14823.2.3.2.15.1.1.28Integer32 (0..29)read-writecurrent
enterpriseApSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.16
enterpriseApSNMPCommunityReadOnly
OBJECT-TYPE
The SNMP Read Only Community. The value if read, will only show ******.
1.3.6.1.4.1.14823.2.3.2.16.1DisplayString (SIZE(0..32))read-writecurrent
enterpriseApSNMPCommunityReadWrite
OBJECT-TYPE
The SNMP Read Write Community. The value if read, will only show *****.
1.3.6.1.4.1.14823.2.3.2.16.2DisplayString (SIZE(0..32))read-writecurrent
enterpriseApSNMPTrapDestinationTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each trap receiving server.
1.3.6.1.4.1.14823.2.3.2.16.3not-accessiblecurrent
enterpriseApSNMPTrapDestinationEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one trap receiving server.
1.3.6.1.4.1.14823.2.3.2.16.3.1not-accessiblecurrent
enterpriseApSNMPTrapDestinationIndex
OBJECT-TYPE
Index of the Trap Destination Table.
1.3.6.1.4.1.14823.2.3.2.16.3.1.1INTEGER (1..4)not-accessiblecurrent
enterpriseApSNMPTrapDestinationCommunity
OBJECT-TYPE
The SNMP Trap Community
1.3.6.1.4.1.14823.2.3.2.16.3.1.2DisplayString (SIZE(0..32))read-writecurrent
enterpriseApSNMPTrapDestinationIP
OBJECT-TYPE
The IP address of the trap receiving server.
1.3.6.1.4.1.14823.2.3.2.16.3.1.3IpAddressread-writecurrent
enterpriseApSNMPTrapDestinationState
OBJECT-TYPE
This value indicates whether the trap receiving server is enabled.
1.3.6.1.4.1.14823.2.3.2.16.3.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSNMPTrapFilters
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.16.4
sysSystemUpTrapEnabled
OBJECT-TYPE
This value indicates whether the sysSystemUp trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.1INTEGER {enabled(1), disabled(2)}read-writecurrent
sysSystemDownTrapEnabled
OBJECT-TYPE
This value indicates whether the sysSystemDowntrap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.2INTEGER {enabled(1), disabled(2)}read-writecurrent
sysRadiusServerChangedTrapEnabled
OBJECT-TYPE
This value indicates whether the sysRadiusServerChanged trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.3INTEGER {enabled(1), disabled(2)}read-writecurrent
sysConfigFileVersionChangedTrapEnabled
OBJECT-TYPE
This value indicates whether the sysConfigFileVersionChanged trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.4INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11StationAssociationTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11StationAssociation trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.5INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11StationReAssociationTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11StationReAssociation trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.6INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11StationAuthenticationTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11StationAuthentication trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.7INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11StationRequestFailTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11StationRequestFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.8INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11InterfaceBFailTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11InterfaceBFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.9INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11InterfaceAGFailTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11InterfaceAGFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.10INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xMacAddrAuthSuccessTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xMacAddrAuthSuccess trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.11INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xMacAddrAuthFailTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xMacAddrAuthFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.12INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xAuthNotInitiatedTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xAuthNotInitiated trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.13INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xAuthSuccessTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xAuthSuccess trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.14INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xAuthFailTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xAuthFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.15INTEGER {enabled(1), disabled(2)}read-writecurrent
localMacAddrAuthSuccessTrapEnabled
OBJECT-TYPE
This value indicates whether the localMacAddrAuthSuccess trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.16INTEGER {enabled(1), disabled(2)}read-writecurrent
localMacAddrAuthFailTrapEnabled
OBJECT-TYPE
This value indicates whether the localMacAddrAuthFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.17INTEGER {enabled(1), disabled(2)}read-writecurrent
pppLogonFailTrapEnabled
OBJECT-TYPE
This value indicates whether the pppLogonFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.18INTEGER {enabled(1), disabled(2)}read-writecurrent
iappStationRoamedFromTrapEnabled
OBJECT-TYPE
This value indicates whether the iappStationRoamedFrom trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.19INTEGER {enabled(1), disabled(2)}read-writecurrent
iappStationRoamedToTrapEnabled
OBJECT-TYPE
This value indicates whether the iappStationRoamedTo trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.20INTEGER {enabled(1), disabled(2)}read-writecurrent
iappContextDataSentTrapEnabled
OBJECT-TYPE
This value indicates whether the iappContextDataSent trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.21INTEGER {enabled(1), disabled(2)}read-writecurrent
sntpServerFailTrapEnabled
OBJECT-TYPE
This value indicates whether the sntpServerFail trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.22INTEGER {enabled(1), disabled(2)}read-writecurrent
dot1xSuppAuthenticatedTrapEnabled
OBJECT-TYPE
This value indicates whether the dot1xSupplicantAuthenticated trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.23INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11FailedTransmitsTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11FailedTransmitsTrapEnabled trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.24INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11AckFailuresTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11AckFailuresTrapEnabled trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.25INTEGER {enabled(1), disabled(2)}read-writecurrent
dot11FcsErrorsTrapEnabled
OBJECT-TYPE
This value indicates whether the dot11FcsErrorsTrapEnabled trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.26INTEGER {enabled(1), disabled(2)}read-writecurrent
rogueAPDetectedTrapEnabled
OBJECT-TYPE
This value indicates whether the RogueAPDetectedTrapEnabled trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.27INTEGER {enabled(1), disabled(2)}read-writecurrent
possibleRogueAPDetectedTrapEnabled
OBJECT-TYPE
This value indicates whether the RogueAPDetectedTrapEnabled trap is enabled.
1.3.6.1.4.1.14823.2.3.2.16.4.28INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSession
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.17
enterpriseApSessionTable
OBJECT-TYPE
This table list all sessions (wireless stations) status
1.3.6.1.4.1.14823.2.3.2.17.1not-accessiblecurrent
enterpriseApSessionEntry
OBJECT-TYPE
An entry in the table, containing information about status and statistics of the wireless station.
1.3.6.1.4.1.14823.2.3.2.17.1.1not-accessiblecurrent
enterpriseApSessionIfIndex
OBJECT-TYPE
Interface index for the radio this session is associated with.
1.3.6.1.4.1.14823.2.3.2.17.1.1.1Integer32not-accessiblecurrent
enterpriseApSessionStationAddres
OBJECT-TYPE
The unique MAC Address of the station for this session.
1.3.6.1.4.1.14823.2.3.2.17.1.1.2MacAddressnot-accessiblecurrent
enterpriseApSessionAuthenticated
OBJECT-TYPE
Whether the session is authenticated or not.
1.3.6.1.4.1.14823.2.3.2.17.1.1.3TruthValueread-onlycurrent
enterpriseApSessionAssociated
OBJECT-TYPE
Whether the session is associated or not. It is rare case that not associated stations show up in the table.
1.3.6.1.4.1.14823.2.3.2.17.1.1.4TruthValueread-onlycurrent
enterpriseApSessionIsForwarding
OBJECT-TYPE
Whether the AP is forwarding the client station traffic (higher level authentication)
1.3.6.1.4.1.14823.2.3.2.17.1.1.5TruthValueread-onlycurrent
enterpriseApSessionKeyType
OBJECT-TYPE
The encryption key type used by the station. Note that wpa-wep is not supported
1.3.6.1.4.1.14823.2.3.2.17.1.1.6INTEGER {none(1), staticWep(2), dynamicWep(3), wpaWep(4), wpaTkip(5), wpaAes(6)}read-onlycurrent
enterpriseApSessionAssociationId
OBJECT-TYPE
The internal association identify number
1.3.6.1.4.1.14823.2.3.2.17.1.1.7Integer32read-onlycurrent
enterpriseApSessionLastAuthenticatedTime
OBJECT-TYPE
This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup
1.3.6.1.4.1.14823.2.3.2.17.1.1.8TimeTicksread-onlycurrent
enterpriseApSessionAssociatedTime
OBJECT-TYPE
This is the time in hundredths of a second since the client associated. The value is related to the system startup
1.3.6.1.4.1.14823.2.3.2.17.1.1.9TimeTicksread-onlycurrent
enterpriseApSessionLastAssociatedTime
OBJECT-TYPE
This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup
1.3.6.1.4.1.14823.2.3.2.17.1.1.10TimeTicksread-onlycurrent
enterpriseApSessionLastDisassociatedTime
OBJECT-TYPE
This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup
1.3.6.1.4.1.14823.2.3.2.17.1.1.11TimeTicksread-onlycurrent
enterpriseApSessionTxPacketCount
OBJECT-TYPE
This is the number of packets transmitted from the client to the AP. It includes data, control and management packets.
1.3.6.1.4.1.14823.2.3.2.17.1.1.12Counter32read-onlycurrent
enterpriseApSessionRxPacketCount
OBJECT-TYPE
This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets.
1.3.6.1.4.1.14823.2.3.2.17.1.1.13Counter32read-onlycurrent
enterpriseApSessionTxByteCount
OBJECT-TYPE
This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets.
1.3.6.1.4.1.14823.2.3.2.17.1.1.14Counter32read-onlycurrent
enterpriseApSessionRxByteCount
OBJECT-TYPE
This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets.
1.3.6.1.4.1.14823.2.3.2.17.1.1.15Counter32read-onlycurrent
enterpriseAPVapRadio
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.20
enterpriseAPVapRadioTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each radio.
1.3.6.1.4.1.14823.2.3.2.20.1not-accessiblecurrent
enterpriseAPVapRadioEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of one radio of the AP.
1.3.6.1.4.1.14823.2.3.2.20.1.1not-accessiblecurrent
enterpriseAPVapRadioIndex
OBJECT-TYPE
Radio Index for configuration.
1.3.6.1.4.1.14823.2.3.2.20.1.1.1Integer32not-accessiblecurrent
enterpriseAPVapRadioState
OBJECT-TYPE
This value indicates the state of the radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseAPVapRadioClosedSystem
OBJECT-TYPE
This value indicates whether closed system is enabled for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseAPVapRadioMaxAssoc
OBJECT-TYPE
This value indicates the max number of clients allowed on this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.4INTEGER (1..64)read-writecurrent
enterpriseAPVapRadioTransmitKey
OBJECT-TYPE
This value indicates default transmit key in use for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.5INTEGER (1..4)read-writecurrent
enterpriseAPVapRadioDescription
OBJECT-TYPE
This value indicates the description for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.6DisplayString (SIZE(0..80))read-writecurrent
enterpriseAPVapRadioAuthTimeoutInterval
OBJECT-TYPE
This value indicates the Authentication Timeout interval for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.8Integer32 (5..60)read-writecurrent
enterpriseAPVapRadioAssocTimeoutInterval
OBJECT-TYPE
This value indicates the Association Timeout interval for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.9Integer32 (5..60)read-writecurrent
enterpriseAPVapRadioWPA2PMKSALifeTime
OBJECT-TYPE
This value indicates the WPA2 PMSA Life Time for this radio interface.
1.3.6.1.4.1.14823.2.3.2.20.1.1.10Integer32 (1..1440)read-writecurrent
enterpriseApRadioWds
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.22
enterpriseApRadioWdsTable
OBJECT-TYPE
Table of configuration information for Wds for each Radio interface.
1.3.6.1.4.1.14823.2.3.2.22.1not-accessiblecurrent
enterpriseApRadioWdsEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable). The table does not contain the radio index as a member of the table.
1.3.6.1.4.1.14823.2.3.2.22.1.1not-accessiblecurrent
wdsApRole
OBJECT-TYPE
This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(4): Bridge Mode. relay wireless traffic.
1.3.6.1.4.1.14823.2.3.2.22.1.1.1INTEGER {roleAp(1), roleBridgeMaster(2), roleBridge(4)}read-writecurrent
wdsChannelAutoSync
OBJECT-TYPE
This value indicates the states of channel auto synchronize for this radio.
1.3.6.1.4.1.14823.2.3.2.22.1.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
wdsMasterSlaveMode
OBJECT-TYPE
This value indicates the Master/Slave mode for this radio. master (1) To set to master mode. slave (2) To set to slave mode.
1.3.6.1.4.1.14823.2.3.2.22.1.1.4INTEGER {master(1), slave(2)}read-writecurrent
enterpriseApRadioWdsPeerTable
OBJECT-TYPE
Table of configuration information for Wds Peers for each Radio interface.
1.3.6.1.4.1.14823.2.3.2.22.2not-accessiblecurrent
enterpriseApRadioWdsPeerEntry
OBJECT-TYPE
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable) and the peer index (Up to 8). The table does not contain the radio index as a member of the table.
1.3.6.1.4.1.14823.2.3.2.22.2.1not-accessiblecurrent
wdsPeerIndex
OBJECT-TYPE
Peer Index for the radio interface.
1.3.6.1.4.1.14823.2.3.2.22.2.1.1Integer32not-accessiblecurrent
wdsPeerBssid
OBJECT-TYPE
The BSSID for this peer.
1.3.6.1.4.1.14823.2.3.2.22.2.1.2DisplayString (SIZE(1..6))read-writecurrent
enterpriseApWMM
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.24
enterpriseApWMMTable
OBJECT-TYPE
The table of WMM information for each radio interface.
1.3.6.1.4.1.14823.2.3.2.24.1not-accessiblecurrent
enterpriseApWMMEntry
OBJECT-TYPE
An entry of table, contains the WMM information.
1.3.6.1.4.1.14823.2.3.2.24.1.1not-accessiblecurrent
enterpriseApWMMModeIndex
OBJECT-TYPE
Peer Index for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.1.1.1Integer32not-accessiblecurrent
enterpriseApWMMMode
OBJECT-TYPE
This value indicates the WMM mode for the radio interface. disabled(1) To set WMM mode disabled. support (2) To set WMM mode supported. required(3) To set WMM mode required.
1.3.6.1.4.1.14823.2.3.2.24.1.1.2INTEGER {disabled(1), support(2), required(3)}read-writecurrent
enterpriseApWMMAckPolicyTable
OBJECT-TYPE
The table of WMM Ack Policy information for each ac number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.2not-accessiblecurrent
enterpriseApWMMAckPolicyEntry
OBJECT-TYPE
An entry of table, contains the WMM Ack Policy information.
1.3.6.1.4.1.14823.2.3.2.24.2.1not-accessiblecurrent
enterpriseApWMMAckPolicyIndex
OBJECT-TYPE
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effect) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
1.3.6.1.4.1.14823.2.3.2.24.2.1.1Integer32read-onlycurrent
enterpriseApWMMACKPolicy
OBJECT-TYPE
This value indicates WMM Ack Policy state of each ac number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.2.1.2INTEGER {acknowledge(1), NoAcknowledge(2)}read-writecurrent
enterpriseApWMMBSSParamTable
OBJECT-TYPE
The table of WMM BSS parameter information.
1.3.6.1.4.1.14823.2.3.2.24.3not-accessiblecurrent
enterpriseApWMMBSSParamEntry
OBJECT-TYPE
An entry of table, contains the WMM BSS parameter information for each ac number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1not-accessiblecurrent
enterpriseApWMMBSSParamIndex
OBJECT-TYPE
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
1.3.6.1.4.1.14823.2.3.2.24.3.1.1Integer32read-onlycurrent
enterpriseApWMMBSSParamLogCwMin
OBJECT-TYPE
This value indicates the WMM BSS parameter logCwMin of AC number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1.2Integer32 (1..15)read-writecurrent
enterpriseApWMMBSSParamLogCwMax
OBJECT-TYPE
This value indicates the WMM BSS parameter logCwMax of each AC number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1.3Integer32 (1..15)read-writecurrent
enterpriseApWMMBSSParamAIFSN
OBJECT-TYPE
This value indicates the WMM BSS parameters AIFSN of each AC number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1.4Integer32 (1..15)read-writecurrent
enterpriseApWMMBSSParamTXOPLimit
OBJECT-TYPE
This value indicates the WMM BSS parameters TXOP Limit of each AC number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1.5Integer32 (0..65535)read-writecurrent
enterpriseApWMMBSSParamAdmissionCtrl
OBJECT-TYPE
This value indicates the BSS parameters Admission Control of each AC number for the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.3.1.6INTEGER {ebabled(1), disabled(2)}read-writecurrent
enterpriseApWMMAPParamTable
OBJECT-TYPE
The table of configuration information for WMM AP parameters for each ac number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4not-accessiblecurrent
enterpriseApWMMAPParamEntry
OBJECT-TYPE
An entry table, include the Ap parameter information for each ac numbers.
1.3.6.1.4.1.14823.2.3.2.24.4.1not-accessiblecurrent
enterpriseApWMMAPParamIndex
OBJECT-TYPE
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
1.3.6.1.4.1.14823.2.3.2.24.4.1.1Integer32read-onlycurrent
enterpriseApWMMAPParamLogCwMin
OBJECT-TYPE
This value indicates the LogCwMin of AP parameter for each AC number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4.1.2Integer32 (1..15)read-writecurrent
enterpriseApWMMAPParamLogCwMax
OBJECT-TYPE
This value indicates the LogCwMax of AP parameter for each AC number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4.1.3Integer32 (1..15)read-writecurrent
enterpriseApWMMAPParamAIFSN
OBJECT-TYPE
This value indicates the AIFSN of AP parameter for each AC number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4.1.4Integer32 (1..15)read-writecurrent
enterpriseApWMMAPParamTXOPLimit
OBJECT-TYPE
This value indicates the TXOP Limit of AP parameter for each AC number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4.1.5Integer32 (0..65535)read-writecurrent
enterpriseApWMMAPParamAdmissionCtrl
OBJECT-TYPE
This value indicates the admission control of AP parameter for each AC number on the radio interface.
1.3.6.1.4.1.14823.2.3.2.24.4.1.6INTEGER {ebabled(1), disabled(2)}read-writecurrent
enterpriseApSTP
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.25
enterpriseApSTPBridgeStatus
OBJECT-TYPE
This value indicates the STP bridge status for the radio interface.
1.3.6.1.4.1.14823.2.3.2.25.1INTEGER {enabled(1), disabled(2)}read-writecurrent
enterpriseApSTPBridgePriority
OBJECT-TYPE
This value indicates the STP bridge priority for the radio interface.
1.3.6.1.4.1.14823.2.3.2.25.2Integer32 (0..65535)read-writecurrent
enterpriseApSTPBridgeMaxAge
OBJECT-TYPE
This value indicates the STP bridge max age for the radio interface.(unit: second)
1.3.6.1.4.1.14823.2.3.2.25.3Integer32 (6..40)read-writecurrent
enterpriseApSTPHelloTime
OBJECT-TYPE
This value indicates the STP hello time for the radio interface.(unit: second)
1.3.6.1.4.1.14823.2.3.2.25.4Integer32 (1..10)read-writecurrent
enterpriseApSTPBridgeForwardingDelay
OBJECT-TYPE
This value indicates the STP forwarding delay for the radio interface.(unit: second)
1.3.6.1.4.1.14823.2.3.2.25.5Integer32 (4..30)read-writecurrent
enterpriseApSTPRadioInterface
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.25.6
enterpriseApSTPNodeTable
OBJECT-TYPE
The table of STP link Path Cost and link port priority information for each nodes on radio interface.
1.3.6.1.4.1.14823.2.3.2.25.6.1not-accessiblecurrent
enterpriseApSTPNodeEntry
OBJECT-TYPE
An entry in a table, contain the link path cost and link port priroity information.
1.3.6.1.4.1.14823.2.3.2.25.6.1.1not-accessiblecurrent
enterpriseApSTPNodeIndex
OBJECT-TYPE
Peer Index for the nodes on the radio interface.
1.3.6.1.4.1.14823.2.3.2.25.6.1.1.1Integer32not-accessiblecurrent
enterpriseApSTPNodeLinkPathCost
OBJECT-TYPE
This value indicates the link path cost for the node on this radio interface.
1.3.6.1.4.1.14823.2.3.2.25.6.1.1.2Integer32 (1..65535)read-writecurrent
enterpriseApSTPNodeLinkPortPriority
OBJECT-TYPE
This value indicates the link path cost for the node on this radio interface.
1.3.6.1.4.1.14823.2.3.2.25.6.1.1.3Integer32 (0..255)read-writecurrent
enterpriseApSTPEthernetInterface
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.3.2.25.7
enterpriseApSTPEthernetLinkPathCost
OBJECT-TYPE
This value indicates link path cost for ethernet interface.
1.3.6.1.4.1.14823.2.3.2.25.7.1Integer32 (1..65535)read-writecurrent
enterpriseApSTPEthernetLinkPortPriority
OBJECT-TYPE
This value indicates link port prirorty for ethernet interface.
1.3.6.1.4.1.14823.2.3.2.25.7.2Integer32 (0..255)read-writecurrent

Notifications

NameOIDStatus
sysSystemUp
NOTIFICATION-TYPE
The system up notification shall be sent when the AP is fully up and running.
1.3.6.1.4.1.14823.2.3.2.1.5.2.1current
sysSystemDown
NOTIFICATION-TYPE
The system down notification shall be sent before the AP is about to reboot.
1.3.6.1.4.1.14823.2.3.2.1.5.2.2current
sysRadiusServerChanged
NOTIFICATION-TYPE
The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary.
1.3.6.1.4.1.14823.2.3.2.1.5.2.3current
sysConfigFileVersionChanged
NOTIFICATION-TYPE
The Config file version changed notification shall be sent when the version of the AP's configuration file has changed.
1.3.6.1.4.1.14823.2.3.2.1.5.2.4current
dot11StationAssociation
NOTIFICATION-TYPE
The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.1current
dot11StationReAssociation
NOTIFICATION-TYPE
The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.2current
dot11StationAuthentication
NOTIFICATION-TYPE
The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.3current
dot11StationRequestFail
NOTIFICATION-TYPE
The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure.
1.3.6.1.4.1.14823.2.3.2.7.4.2.4current
dot11InterfaceBFail
NOTIFICATION-TYPE
The InterfaceBFail notification shall be sent out when 802.11b wireless interface has failed.
1.3.6.1.4.1.14823.2.3.2.7.4.2.5current
dot11InterfaceAGFail
NOTIFICATION-TYPE
The InterfaceAGFail notification shall be sent out when 802.11a/802.11g wireless interface has failed.
1.3.6.1.4.1.14823.2.3.2.7.4.2.6current
dot1xMacAddrAuthSuccess
NOTIFICATION-TYPE
The 802.1x MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.7current
dot1xMacAddrAuthFail
NOTIFICATION-TYPE
The 802.1x MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
1.3.6.1.4.1.14823.2.3.2.7.4.2.8current
dot1xAuthNotInitiated
NOTIFICATION-TYPE
The 802.1x authentication not initiated notification shall be sent when a station did not initiate 802.1x authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1x authentication.
1.3.6.1.4.1.14823.2.3.2.7.4.2.9current
dot1xAuthSuccess
NOTIFICATION-TYPE
The 802.1x authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.10current
dot1xAuthFail
NOTIFICATION-TYPE
The 802.1x authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
1.3.6.1.4.1.14823.2.3.2.7.4.2.11current
localMacAddrAuthSuccess
NOTIFICATION-TYPE
The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.12current
localMacAddrAuthFail
NOTIFICATION-TYPE
The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
1.3.6.1.4.1.14823.2.3.2.7.4.2.13current
pppLogonFail
NOTIFICATION-TYPE
The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password.
1.3.6.1.4.1.14823.2.3.2.7.4.2.14current
iappStationRoamedFrom
NOTIFICATION-TYPE
The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP.
1.3.6.1.4.1.14823.2.3.2.7.4.2.15current
iappStationRoamedTo
NOTIFICATION-TYPE
The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP.
1.3.6.1.4.1.14823.2.3.2.7.4.2.16current
iappContextDataSent
NOTIFICATION-TYPE
The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP.
1.3.6.1.4.1.14823.2.3.2.7.4.2.17current
dot1xSupplicantAuthenticated
NOTIFICATION-TYPE
The notification shall be sent when the AP has successfully authenticated with the switch. The value of the notification shall include the MAC address of the switch (authenticator) that the AP has authenticated with.
1.3.6.1.4.1.14823.2.3.2.7.4.2.18current
sntpServerFail
NOTIFICATION-TYPE
The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server.
1.3.6.1.4.1.14823.2.3.2.11.10.2.1current