ALTEON-TS-PHYSICAL-MIB

Registered at: 1.3.6.1.4.1.1872.2.1.2.3

1.3.6.1.4.1.1872.2.1.4

1.3.6.1.4.1.1872.2.1.6

1.3.6.1.4.1.1872.2.1.7

1.3.6.1.4.1.1872.2.1.8.17

1.3.6.1.4.1.1872.2.1.8.26

1.3.6.1.4.1.1872.2.1.9.1

1.3.6.1.4.1.1872.2.1.14.3

1.3.6.1.4.1.1872.2.1.18

1.3.6.1.4.1.1872.2.1.19
Namespace: alteonos
Source file: ALTEON-TS-PHYSICAL-MIB
Digest: sha256:a061d33d7edafd5709c412be984416385e893b3c00d658e8610ae147a45d082c

Imports

From	Symbols
ALTEON-ROOT-MIB	`switch`
ALTEON-TIGON-SWITCH-MIB	`agent, information, operCmds, stats`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso`
SNMPv2-TC	`DisplayString, PhysAddress, TEXTUAL-CONVENTION`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALTEON-ROOT-MIB
ALTEON-TIGON-SWITCH-MIB
ALTEON-TS-PHYSICAL-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

Name	OID	Syntax	Access	Status
agPortConfig OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.2.3
agPortTableMaxEnt OBJECT-TYPE The maximum number of rows in the port configuration host table.	1.3.6.1.4.1.1872.2.1.2.3.1	INTEGER	read-only	mandatory
agPortCurCfgTable OBJECT-TYPE The table of port configuration in the current_configuration block.	1.3.6.1.4.1.1872.2.1.2.3.2		not-accessible	mandatory
agPortCurCfgTableEntry OBJECT-TYPE A row in the port table in the current_configuration block.	1.3.6.1.4.1.1872.2.1.2.3.2.1		not-accessible	mandatory
agPortCurCfgIndx OBJECT-TYPE The index of the row in port configurations table.	1.3.6.1.4.1.1872.2.1.2.3.2.1.1	INTEGER (1..255)	read-only	mandatory
agPortCurCfgPrefLink OBJECT-TYPE This is the preferred link.	1.3.6.1.4.1.1872.2.1.2.3.2.1.2	INTEGER {fast-ethernet(2), gigabit-ethernet(3)}	read-only	mandatory
agPortCurCfgBackLink OBJECT-TYPE This is the backup link.	1.3.6.1.4.1.1872.2.1.2.3.2.1.3	INTEGER {fast-ethernet(2), gigabit-ethernet(3), none(4)}	read-only	mandatory
agPortCurCfgState OBJECT-TYPE This is the state of the port.	1.3.6.1.4.1.1872.2.1.2.3.2.1.4	INTEGER {enabled(2), disabled(3)}	read-only	mandatory
agPortCurCfgVlanTag OBJECT-TYPE This is VLAN tag state of the port	1.3.6.1.4.1.1872.2.1.2.3.2.1.5	INTEGER {tagged(2), untagged(3)}	read-only	mandatory
agPortCurCfgStp OBJECT-TYPE This object is used to turn Spanning Tree on or off for the port.	1.3.6.1.4.1.1872.2.1.2.3.2.1.6	INTEGER {on(2), off(3)}	read-only	mandatory
agPortCurCfgRmon OBJECT-TYPE This object is used to turn RMON on or off on the port.	1.3.6.1.4.1.1872.2.1.2.3.2.1.7	INTEGER {on(2), off(3)}	read-only	mandatory
agPortCurCfgPVID OBJECT-TYPE The default VLAN ID for the port.	1.3.6.1.4.1.1872.2.1.2.3.2.1.8	INTEGER (1..4094)	read-only	mandatory
agPortCurCfgFastEthAutoNeg OBJECT-TYPE This object is used to turn the autonegotiation on or off for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.9	INTEGER {on(2), off(3)}	read-only	mandatory
agPortCurCfgFastEthSpeed OBJECT-TYPE Selects the port speed for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.10	INTEGER {mbs10(2), mbs100(3), mbs10or100(4)}	read-only	mandatory
agPortCurCfgFastEthMode OBJECT-TYPE This object is used to select port mode for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.11	INTEGER {full-duplex(2), half-duplex(3), full-or-half-duplex(4)}	read-only	mandatory
agPortCurCfgFastEthFctl OBJECT-TYPE Selects the port flow control for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.12	INTEGER {transmit(2), receive(3), both(4), none(5)}	read-only	mandatory
agPortCurCfgGigEthAutoNeg OBJECT-TYPE This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.13	INTEGER {on(2), off(3)}	read-only	mandatory
agPortCurCfgGigEthFctl OBJECT-TYPE This object is used to select port flow control for gigabit Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.2.1.14	INTEGER {transmit(2), receive(3), both(4), none(5)}	read-only	mandatory
agPortCurCfgPortName OBJECT-TYPE The switch port name.	1.3.6.1.4.1.1872.2.1.2.3.2.1.15	DisplayString (SIZE(0..63))	read-only	mandatory
agPortCurCfgBwmContract OBJECT-TYPE The switch port Bandwidth Management contract number.	1.3.6.1.4.1.1872.2.1.2.3.2.1.16	INTEGER	read-only	mandatory
agPortCurCfgDiscardNonIPs OBJECT-TYPE Enable or disable to discard all non-IP traffic on the switch port.	1.3.6.1.4.1.1872.2.1.2.3.2.1.17	INTEGER {enabled(2), disabled(3)}	read-only	mandatory
agPortCurCfgLinkTrap OBJECT-TYPE Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.	1.3.6.1.4.1.1872.2.1.2.3.2.1.18	INTEGER {enabled(1), disabled(2)}	read-only	mandatory
agPortNewCfgTable OBJECT-TYPE The table of port configuration in the new_configuration block.	1.3.6.1.4.1.1872.2.1.2.3.3		not-accessible	mandatory
agPortNewCfgTableEntry OBJECT-TYPE A row in the port configuration table in the new_configuration block.	1.3.6.1.4.1.1872.2.1.2.3.3.1		not-accessible	mandatory
agPortNewCfgIndx OBJECT-TYPE The index of the row in port configurations table.	1.3.6.1.4.1.1872.2.1.2.3.3.1.1	INTEGER (1..255)	read-only	mandatory
agPortNewCfgPrefLink OBJECT-TYPE This is the preferred link.	1.3.6.1.4.1.1872.2.1.2.3.3.1.2	INTEGER {fast-ethernet(2), gigabit-ethernet(3)}	read-write	mandatory
agPortNewCfgBackLink OBJECT-TYPE This is the backup link.	1.3.6.1.4.1.1872.2.1.2.3.3.1.3	INTEGER {fast-ethernet(2), gigabit-ethernet(3), none(4)}	read-write	mandatory
agPortNewCfgState OBJECT-TYPE This is the state of the port.	1.3.6.1.4.1.1872.2.1.2.3.3.1.4	INTEGER {enabled(2), disabled(3)}	read-write	mandatory
agPortNewCfgVlanTag OBJECT-TYPE This is VLAN tag state of the port	1.3.6.1.4.1.1872.2.1.2.3.3.1.5	INTEGER {tagged(2), untagged(3)}	read-write	mandatory
agPortNewCfgStp OBJECT-TYPE This object is used to turn Spanning Tree on or off for the port.	1.3.6.1.4.1.1872.2.1.2.3.3.1.6	INTEGER {on(2), off(3)}	read-write	mandatory
agPortNewCfgRmon OBJECT-TYPE This object is used to turn RMON on or off on the port.	1.3.6.1.4.1.1872.2.1.2.3.3.1.7	INTEGER {on(2), off(3)}	read-write	mandatory
agPortNewCfgPVID OBJECT-TYPE The default VLAN ID for the port.	1.3.6.1.4.1.1872.2.1.2.3.3.1.8	INTEGER (1..4094)	read-write	mandatory
agPortNewCfgFastEthAutoNeg OBJECT-TYPE This object is used to turn the autonegotiation on or off for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.9	INTEGER {on(2), off(3)}	read-write	mandatory
agPortNewCfgFastEthSpeed OBJECT-TYPE Selects the port speed for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.10	INTEGER {mbs10(2), mbs100(3), mbs10or100(4)}	read-write	mandatory
agPortNewCfgFastEthMode OBJECT-TYPE This object is used to select port mode for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.11	INTEGER {full-duplex(2), half-duplex(3), full-or-half-duplex(4)}	read-write	mandatory
agPortNewCfgFastEthFctl OBJECT-TYPE Selects the port flow control for fast Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.12	INTEGER {transmit(2), receive(3), both(4), none(5)}	read-write	mandatory
agPortNewCfgGigEthAutoNeg OBJECT-TYPE This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.13	INTEGER {on(2), off(3)}	read-write	mandatory
agPortNewCfgGigEthFctl OBJECT-TYPE This object is used to select port flow control for gigabit Ethernet connection.	1.3.6.1.4.1.1872.2.1.2.3.3.1.14	INTEGER {transmit(2), receive(3), both(4), none(5)}	read-write	mandatory
agPortNewCfgPortName OBJECT-TYPE The switch port name.	1.3.6.1.4.1.1872.2.1.2.3.3.1.15	DisplayString (SIZE(0..63))	read-write	mandatory
agPortNewCfgBwmContract OBJECT-TYPE The switch port Bandwidth Management contract number.	1.3.6.1.4.1.1872.2.1.2.3.3.1.16	INTEGER	read-write	mandatory
agPortNewCfgDiscardNonIPs OBJECT-TYPE Enable or disable to discard all non-IP traffic on the switch port.	1.3.6.1.4.1.1872.2.1.2.3.3.1.17	INTEGER {enabled(2), disabled(3)}	read-write	mandatory
agPortNewCfgLinkTrap OBJECT-TYPE Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.	1.3.6.1.4.1.1872.2.1.2.3.3.1.18	INTEGER {enabled(1), disabled(2)}	read-write	mandatory
vlans OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.4
vlanMaxEnt OBJECT-TYPE The maximum number of rows in the VLAN configuration table.	1.3.6.1.4.1.1872.2.1.4.1	INTEGER	read-only	mandatory
vlanCurCfgTable OBJECT-TYPE The table of VLAN configuration.	1.3.6.1.4.1.1872.2.1.4.2		not-accessible	mandatory
vlanCurCfgTableEntry OBJECT-TYPE A row in the VLAN configuration table.	1.3.6.1.4.1.1872.2.1.4.2.1		not-accessible	mandatory
vlanCurCfgVlanId OBJECT-TYPE The VLAN identifier.	1.3.6.1.4.1.1872.2.1.4.2.1.1	INTEGER (1..4094)	read-only	mandatory
vlanCurCfgVlanName OBJECT-TYPE The VLAN name.	1.3.6.1.4.1.1872.2.1.4.2.1.2	DisplayString (SIZE(0..32))	read-only	mandatory
vlanCurCfgPorts OBJECT-TYPE The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN	1.3.6.1.4.1.1872.2.1.4.2.1.3	OCTET STRING (SIZE(0..16))	read-only	mandatory
vlanCurCfgState OBJECT-TYPE Enable or disable a VLAN	1.3.6.1.4.1.1872.2.1.4.2.1.4	INTEGER {enabled(2), disabled(3)}	read-only	mandatory
vlanCurCfgJumbo OBJECT-TYPE Enable or Disable the Jumbo frame support for the VLAN	1.3.6.1.4.1.1872.2.1.4.2.1.5	INTEGER {enabled(2), disabled(3)}	read-only	mandatory
vlanCurCfgBwmContract OBJECT-TYPE Default contract number the VLAN	1.3.6.1.4.1.1872.2.1.4.2.1.6	INTEGER	read-only	mandatory
vlanCurCfgStg OBJECT-TYPE The Spanning Tree Group for the VLAN.	1.3.6.1.4.1.1872.2.1.4.2.1.7	INTEGER	read-only	mandatory
vlanNewCfgTable OBJECT-TYPE The table of VLAN configuration.	1.3.6.1.4.1.1872.2.1.4.3		not-accessible	mandatory
vlanNewCfgTableEntry OBJECT-TYPE A row in the VLAN configuration table.	1.3.6.1.4.1.1872.2.1.4.3.1		not-accessible	mandatory
vlanNewCfgVlanId OBJECT-TYPE The VLAN identifier.	1.3.6.1.4.1.1872.2.1.4.3.1.1	INTEGER (1..4094)	read-only	mandatory
vlanNewCfgVlanName OBJECT-TYPE The VLAN name.	1.3.6.1.4.1.1872.2.1.4.3.1.2	DisplayString (SIZE(0..32))	read-write	mandatory
vlanNewCfgPorts OBJECT-TYPE The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN	1.3.6.1.4.1.1872.2.1.4.3.1.3	OCTET STRING (SIZE(0..16))	read-only	mandatory
vlanNewCfgState OBJECT-TYPE Enable or disable a VLAN	1.3.6.1.4.1.1872.2.1.4.3.1.4	INTEGER {enabled(2), disabled(3)}	read-write	mandatory
vlanNewCfgJumbo OBJECT-TYPE Enable or Disable the Jumbo frame support for the VLAN	1.3.6.1.4.1.1872.2.1.4.3.1.5	INTEGER {enabled(2), disabled(3)}	read-write	mandatory
vlanNewCfgAddPort OBJECT-TYPE The port to be added to the specified VLAN. A '0' value is returned when read.	1.3.6.1.4.1.1872.2.1.4.3.1.6	INTEGER	read-write	mandatory
vlanNewCfgRemovePort OBJECT-TYPE The port to be removed from the specified VLAN. A '0' value is returned when read.	1.3.6.1.4.1.1872.2.1.4.3.1.7	INTEGER	read-write	mandatory
vlanNewCfgDelete OBJECT-TYPE This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN	1.3.6.1.4.1.1872.2.1.4.3.1.8	INTEGER {other(1), delete(2)}	read-write	mandatory
vlanNewCfgBwmContract OBJECT-TYPE Default contract number for the VLAN.	1.3.6.1.4.1.1872.2.1.4.3.1.9	INTEGER	read-write	mandatory
vlanNewCfgStg OBJECT-TYPE The Spanning Tree Group for the VLAN.	1.3.6.1.4.1.1872.2.1.4.3.1.10	INTEGER	read-write	mandatory
portmirroring OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.6
pmCurCfgMonitoringPort OBJECT-TYPE The port number of the monitoring port.	1.3.6.1.4.1.1872.2.1.6.1	INTEGER	read-only	obsolete
pmNewCfgMonitoringPort OBJECT-TYPE The port number of the monitoring port.	1.3.6.1.4.1.1872.2.1.6.2	INTEGER	read-write	obsolete
pmCurCfgMirroredPort OBJECT-TYPE The port number of the mirrored port.	1.3.6.1.4.1.1872.2.1.6.3	INTEGER	read-only	obsolete
pmNewCfgMirroredPort OBJECT-TYPE The port number of the mirrored port.	1.3.6.1.4.1.1872.2.1.6.4	INTEGER	read-write	obsolete
pmCurCfgMonitoredTraffic OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored port.	1.3.6.1.4.1.1872.2.1.6.5	INTEGER {none(2), received(3), transmitted(4), both(5)}	read-only	obsolete
pmNewCfgMonitoredTraffic OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored port.	1.3.6.1.4.1.1872.2.1.6.6	INTEGER {none(2), received(3), transmitted(4), both(5)}	read-write	obsolete
pmCurCfgState OBJECT-TYPE The state of Port mirroring.	1.3.6.1.4.1.1872.2.1.6.7	INTEGER {enabled(2), disabled(3)}	read-only	obsolete
pmNewCfgState OBJECT-TYPE The state of Port mirroring.	1.3.6.1.4.1.1872.2.1.6.8	INTEGER {enabled(2), disabled(3)}	read-write	obsolete
pmCurCfgTimeout OBJECT-TYPE The mirroring timeout value in seconds.	1.3.6.1.4.1.1872.2.1.6.9	INTEGER (0..86400)	read-only	obsolete
pmNewCfgTimeout OBJECT-TYPE The mirroring timeout value in seconds.	1.3.6.1.4.1.1872.2.1.6.10	INTEGER (0..86400)	read-write	obsolete
trunkgroup OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.7
trunkGroupTableMaxSize OBJECT-TYPE The maximum number of entries in trunk group table.	1.3.6.1.4.1.1872.2.1.7.1	INTEGER	read-only	mandatory
trunkGroupCurCfgTable OBJECT-TYPE The table of trunk group configuration.	1.3.6.1.4.1.1872.2.1.7.2		not-accessible	mandatory
trunkGroupCurCfgTableEntry OBJECT-TYPE A row in the trunk group configuration table.	1.3.6.1.4.1.1872.2.1.7.2.1		not-accessible	mandatory
trunkGroupCurCfgIndex OBJECT-TYPE The identifier of the trunk group.	1.3.6.1.4.1.1872.2.1.7.2.1.1	INTEGER	read-only	mandatory
trunkGroupCurCfgPorts OBJECT-TYPE The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group	1.3.6.1.4.1.1872.2.1.7.2.1.2	OCTET STRING (SIZE(0..16))	read-only	mandatory
trunkGroupCurCfgState OBJECT-TYPE Enable or disable a trunk group.	1.3.6.1.4.1.1872.2.1.7.2.1.3	INTEGER {enable(1), disable(2)}	read-only	mandatory
trunkGroupCurCfgBwmContract OBJECT-TYPE Default BW contract of a trunk group.	1.3.6.1.4.1.1872.2.1.7.2.1.4	INTEGER	read-only	mandatory
trunkGroupNewCfgTable OBJECT-TYPE The table of trunk group configuration.	1.3.6.1.4.1.1872.2.1.7.3		not-accessible	mandatory
trunkGroupNewCfgTableEntry OBJECT-TYPE A row in the trunk group configuration table.	1.3.6.1.4.1.1872.2.1.7.3.1		not-accessible	mandatory
trunkGroupNewCfgIndex OBJECT-TYPE The identifier of the trunk group.	1.3.6.1.4.1.1872.2.1.7.3.1.1	INTEGER	read-only	mandatory
trunkGroupNewCfgPorts OBJECT-TYPE The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group	1.3.6.1.4.1.1872.2.1.7.3.1.2	OCTET STRING (SIZE(0..16))	read-only	mandatory
trunkGroupNewCfgAddPort OBJECT-TYPE The port to be added in the trunk group. When read, 0 is returned.	1.3.6.1.4.1.1872.2.1.7.3.1.3	INTEGER	read-write	mandatory
trunkGroupNewCfgRemovePort OBJECT-TYPE The port to be deleted from the trunk group. when read, 0 is returned.	1.3.6.1.4.1.1872.2.1.7.3.1.4	INTEGER	read-write	mandatory
trunkGroupNewCfgState OBJECT-TYPE Enable or disable a trunk group.	1.3.6.1.4.1.1872.2.1.7.3.1.5	INTEGER {enable(1), disable(2)}	read-write	mandatory
trunkGroupNewCfgDelete OBJECT-TYPE Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	1.3.6.1.4.1.1872.2.1.7.3.1.6	INTEGER {other(1), delete(2)}	read-write	mandatory
trunkGroupNewCfgBwmContract OBJECT-TYPE Default BW contract of a trunk group.	1.3.6.1.4.1.1872.2.1.7.3.1.7	INTEGER	read-write	mandatory
portCpuStats OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.8.17
portCpuStatsUtilTable OBJECT-TYPE The table of port CPU utilization.	1.3.6.1.4.1.1872.2.1.8.17.1		not-accessible	mandatory
portCpuStatsUtilTableEntry OBJECT-TYPE A row in the port CPU utilization table.	1.3.6.1.4.1.1872.2.1.8.17.1.1		not-accessible	mandatory
portCpuStatsUtilIndx OBJECT-TYPE The port index.	1.3.6.1.4.1.1872.2.1.8.17.1.1.1	INTEGER (1..255)	read-only	mandatory
portCpuAStatsUtil1Second OBJECT-TYPE The utilization of port CPU A over 1 second. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.2	INTEGER	read-only	mandatory
portCpuBStatsUtil1Second OBJECT-TYPE The utilization of port CPU B over 1 second. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.3	INTEGER	read-only	mandatory
portCpuAStatsUtil4Seconds OBJECT-TYPE The utilization of port CPU A over 4 seconds. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.4	INTEGER	read-only	mandatory
portCpuBStatsUtil4Seconds OBJECT-TYPE The utilization of port CPU B over 4 seconds. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.5	INTEGER	read-only	mandatory
portCpuAStatsUtil64Seconds OBJECT-TYPE The utilization of port CPU A over 64 seconds. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.6	INTEGER	read-only	mandatory
portCpuBStatsUtil64Seconds OBJECT-TYPE The utilization of port CPU B over 64 seconds. It shows the percentage.	1.3.6.1.4.1.1872.2.1.8.17.1.1.7	INTEGER	read-only	mandatory
port_stats OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.8.26
portStatsTable OBJECT-TYPE The table of port statistics.	1.3.6.1.4.1.1872.2.1.8.26.1		not-accessible	mandatory
portStatsTableEntry OBJECT-TYPE A row in the port stats table.	1.3.6.1.4.1.1872.2.1.8.26.1.1		not-accessible	mandatory
portStatsIndx OBJECT-TYPE The port index.	1.3.6.1.4.1.1872.2.1.8.26.1.1.1	INTEGER (1..255)	read-only	mandatory
portStatsPhyIfInOctets OBJECT-TYPE The total number of octets received on the interface, including framing characters.	1.3.6.1.4.1.1872.2.1.8.26.1.1.2	Counter	read-only	mandatory
portStatsPhyIfInUcastPkts OBJECT-TYPE The number of subnetwork-unicast packets delivered to a higher-layer protocol.	1.3.6.1.4.1.1872.2.1.8.26.1.1.3	Counter	read-only	mandatory
portStatsPhyIfInNUcastPkts OBJECT-TYPE The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.	1.3.6.1.4.1.1872.2.1.8.26.1.1.4	Counter	read-only	mandatory
portStatsPhyIfInDiscards OBJECT-TYPE The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.	1.3.6.1.4.1.1872.2.1.8.26.1.1.5	Counter	read-only	mandatory
portStatsPhyIfInErrors OBJECT-TYPE The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	1.3.6.1.4.1.1872.2.1.8.26.1.1.6	Counter	read-only	mandatory
portStatsPhyIfInUnknownProtos OBJECT-TYPE The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.	1.3.6.1.4.1.1872.2.1.8.26.1.1.7	Counter	read-only	mandatory
portStatsPhyIfOutOctets OBJECT-TYPE The total number of octets transmitted out of the interface, including framing characters.	1.3.6.1.4.1.1872.2.1.8.26.1.1.8	Counter	read-only	mandatory
portStatsPhyIfOutUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.	1.3.6.1.4.1.1872.2.1.8.26.1.1.9	Counter	read-only	mandatory
portStatsPhyIfOutNUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.	1.3.6.1.4.1.1872.2.1.8.26.1.1.10	Counter	read-only	mandatory
portStatsPhyIfOutDiscards OBJECT-TYPE The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.	1.3.6.1.4.1.1872.2.1.8.26.1.1.11	Counter	read-only	mandatory
portStatsPhyIfOutErrors OBJECT-TYPE The number of outbound packets that could not be transmitted because of errors.	1.3.6.1.4.1.1872.2.1.8.26.1.1.12	Counter	read-only	mandatory
portStatsPhyIfOutQLen OBJECT-TYPE The length of the output packet queue (in packets).	1.3.6.1.4.1.1872.2.1.8.26.1.1.13	Gauge	read-only	mandatory
portStatsPhyIfInBroadcastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	1.3.6.1.4.1.1872.2.1.8.26.1.1.14	Counter	read-only	mandatory
portStatsPhyIfOutBroadcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	1.3.6.1.4.1.1872.2.1.8.26.1.1.15	Counter	read-only	mandatory
port_info OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.9.1
portInfoTable OBJECT-TYPE The table of port information.	1.3.6.1.4.1.1872.2.1.9.1.1		not-accessible	mandatory
portInfoTableEntry OBJECT-TYPE A row in the port information table.	1.3.6.1.4.1.1872.2.1.9.1.1.1		not-accessible	mandatory
portInfoIndx OBJECT-TYPE The port index.	1.3.6.1.4.1.1872.2.1.9.1.1.1.1	INTEGER (1..255)	read-only	mandatory
portInfoSpeed OBJECT-TYPE The current operational speed of the port.	1.3.6.1.4.1.1872.2.1.9.1.1.1.2	INTEGER {mbs10(2), mbs100(3), mbs1000(4), any(5)}	read-only	mandatory
portInfoMode OBJECT-TYPE The current operational mode of the port.	1.3.6.1.4.1.1872.2.1.9.1.1.1.3	INTEGER {full-duplex(2), half-duplex(3)}	read-only	mandatory
portInfoFlowCtrl OBJECT-TYPE The current operational flow control of the port.	1.3.6.1.4.1.1872.2.1.9.1.1.1.4	INTEGER {transmit(2), receive(3), both(4), none(5)}	read-only	mandatory
portInfoLink OBJECT-TYPE The current operational link status of the port.	1.3.6.1.4.1.1872.2.1.9.1.1.1.5	INTEGER {up(1), down(2), disabled(3), inoperative(4)}	read-only	mandatory
portInfoPhyIfDescr OBJECT-TYPE A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.	1.3.6.1.4.1.1872.2.1.9.1.1.1.6	DisplayString (SIZE(0..255))	read-only	mandatory
portInfoPhyIfType OBJECT-TYPE The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.	1.3.6.1.4.1.1872.2.1.9.1.1.1.7	INTEGER {other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32)}	read-only	mandatory
portInfoPhyIfMtu OBJECT-TYPE The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.	1.3.6.1.4.1.1872.2.1.9.1.1.1.8	INTEGER	read-only	mandatory
portInfoPhyIfPhysAddress OBJECT-TYPE The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.	1.3.6.1.4.1.1872.2.1.9.1.1.1.9	PhysAddress	read-only	mandatory
portInfoPhyIfOperStatus OBJECT-TYPE The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.	1.3.6.1.4.1.1872.2.1.9.1.1.1.10	INTEGER {up(1), down(2), testing(3)}	read-only	mandatory
portInfoPhyIfLastChange OBJECT-TYPE The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	1.3.6.1.4.1.1872.2.1.9.1.1.1.11	TimeTicks	read-only	mandatory
mirrOper OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.14.3
mirrOperMonitoringPort OBJECT-TYPE The switch port where the mirrored traffic are sent to. A zero value indicates this field has not been configured.	1.3.6.1.4.1.1872.2.1.14.3.1	INTEGER	read-write	mandatory
mirrOperMirroredPort OBJECT-TYPE The switch port where the egress traffic to be mirrored. A zero value indicates this field has not been configured.	1.3.6.1.4.1.1872.2.1.14.3.2	INTEGER	read-write	mandatory
mirrOperType OBJECT-TYPE Type of packets to be sent to the monitor port. in = packets received at the mirrored port out = packets sent from the mirrored port both = packets sent and received by the mirrored port	1.3.6.1.4.1.1872.2.1.14.3.3	INTEGER {none(1), in(2), out(3), both(4)}	read-write	mandatory
mirrOperTimeout OBJECT-TYPE The duration in seconds for activating the mirroring rule. Zero means forever.	1.3.6.1.4.1.1872.2.1.14.3.4	INTEGER (0..86400)	read-write	mandatory
mirrOperState OBJECT-TYPE Enable or disable port mirroring.	1.3.6.1.4.1.1872.2.1.14.3.5	INTEGER {enabled(1), disabled(2)}	read-write	mandatory
mirroring OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.18
mirrPortMirr OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.18.1
pmCurCfgPortMirrState OBJECT-TYPE The state of port-based port mirroring.	1.3.6.1.4.1.1872.2.1.18.1.1	INTEGER {enabled(1), disabled(2)}	read-only	mandatory
pmNewCfgPortMirrState OBJECT-TYPE The state of port-based port mirroring.	1.3.6.1.4.1.1872.2.1.18.1.2	INTEGER {enabled(1), disabled(2)}	read-write	mandatory
pmCurCfgPortMonitorTable OBJECT-TYPE The table of monitoring ports.	1.3.6.1.4.1.1872.2.1.18.1.3		not-accessible	mandatory
pmCurCfgPortMonitorEntry OBJECT-TYPE A row in the monitoring port table.	1.3.6.1.4.1.1872.2.1.18.1.3.1		not-accessible	mandatory
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE The monitoring port number.	1.3.6.1.4.1.1872.2.1.18.1.3.1.1	INTEGER	read-only	mandatory
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE The mirrored port number	1.3.6.1.4.1.1872.2.1.18.1.3.1.2	INTEGER	read-only	mandatory
pmCurCfgPmirrDirection OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored port.	1.3.6.1.4.1.1872.2.1.18.1.3.1.3	INTEGER {in(1), out(2), both(3)}	read-only	mandatory
pmNewCfgPortMonitorTable OBJECT-TYPE The table of monitoring ports.	1.3.6.1.4.1.1872.2.1.18.1.4		not-accessible	mandatory
pmNewCfgPortMonitorEntry OBJECT-TYPE A row in the monitoring port table.	1.3.6.1.4.1.1872.2.1.18.1.4.1		not-accessible	mandatory
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE The monitoring port number.	1.3.6.1.4.1.1872.2.1.18.1.4.1.1	INTEGER	read-only	mandatory
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE The mirrored port number	1.3.6.1.4.1.1872.2.1.18.1.4.1.2	INTEGER	read-only	mandatory
pmNewCfgPmirrDirection OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored port.	1.3.6.1.4.1.1872.2.1.18.1.4.1.3	INTEGER {in(1), out(2), both(3)}	read-write	mandatory
pmNewCfgPmirrDelete OBJECT-TYPE Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	1.3.6.1.4.1.1872.2.1.18.1.4.1.4	INTEGER {other(1), delete(2)}	read-write	mandatory
mirrVlanMirr OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.18.2
pmCurCfgVlanMirrState OBJECT-TYPE The state of vlan-based port mirroring.	1.3.6.1.4.1.1872.2.1.18.2.1	INTEGER {enabled(1), disabled(2)}	read-only	mandatory
pmNewCfgVlanMirrState OBJECT-TYPE The state of vlan-based port mirroring.	1.3.6.1.4.1.1872.2.1.18.2.2	INTEGER {enabled(1), disabled(2)}	read-write	mandatory
pmCurCfgVlanMonitorTable OBJECT-TYPE The table of vlan based port mirroring.	1.3.6.1.4.1.1872.2.1.18.2.3		not-accessible	mandatory
pmCurCfgVlanMonitorEntry OBJECT-TYPE A row in the monitoring vlan table.	1.3.6.1.4.1.1872.2.1.18.2.3.1		not-accessible	mandatory
pmCurCfgVmirrMoniPortIndex OBJECT-TYPE The monitoring port number.	1.3.6.1.4.1.1872.2.1.18.2.3.1.1	INTEGER	read-only	mandatory
pmCurCfgVmirrMirrVlanIndex OBJECT-TYPE The mirrored vlan number	1.3.6.1.4.1.1872.2.1.18.2.3.1.2	INTEGER	read-only	mandatory
pmCurCfgVmirrDirection OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored vlan.	1.3.6.1.4.1.1872.2.1.18.2.3.1.3	INTEGER {in(1), out(2), both(3)}	read-only	mandatory
pmNewCfgVlanMonitorTable OBJECT-TYPE The table of vlan-based port mirroring.	1.3.6.1.4.1.1872.2.1.18.2.4		not-accessible	mandatory
pmNewCfgVlanMonitorEntry OBJECT-TYPE A row in the monitoring vlan table.	1.3.6.1.4.1.1872.2.1.18.2.4.1		not-accessible	mandatory
pmNewCfgVmirrMoniPortIndex OBJECT-TYPE The monitoring port number.	1.3.6.1.4.1.1872.2.1.18.2.4.1.1	INTEGER	read-only	mandatory
pmNewCfgVmirrMirrVlanIndex OBJECT-TYPE The mirrored vlan number	1.3.6.1.4.1.1872.2.1.18.2.4.1.2	INTEGER	read-only	mandatory
pmNewCfgVmirrDirection OBJECT-TYPE The type of traffic to be monitored with respect to the mirrored vlan.	1.3.6.1.4.1.1872.2.1.18.2.4.1.3	INTEGER {in(1), out(2), both(3)}	read-write	mandatory
pmNewCfgVmirrDelete OBJECT-TYPE Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	1.3.6.1.4.1.1872.2.1.18.2.4.1.4	INTEGER {other(1), delete(2)}	read-write	mandatory
spannTreeGrpCfg OBJECT-IDENTITY	1.3.6.1.4.1.1872.2.1.19
stgCurCfgTable OBJECT-TYPE The table of Spanning Tree Groups configuration in the current_config.	1.3.6.1.4.1.1872.2.1.19.1		not-accessible	mandatory
stgCurCfgTableEntry OBJECT-TYPE Information about a particular Spanning Tree Group configuration.	1.3.6.1.4.1.1872.2.1.19.1.1		not-accessible	mandatory
stgCurCfgIndex OBJECT-TYPE The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	1.3.6.1.4.1.1872.2.1.19.1.1.1	INTEGER (1..8)	read-only	mandatory
stgCurCfgState OBJECT-TYPE Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.1.1.2	INTEGER {on(1), off(2)}	read-only	mandatory
stgCurCfgVlanBmap1 OBJECT-TYPE The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree	1.3.6.1.4.1.1872.2.1.19.1.1.3	OCTET STRING (SIZE(0..256))	read-only	mandatory
stgCurCfgVlanBmap2 OBJECT-TYPE The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 2057 \|\| \|\| \|\| \|\|___ vlan 2056 \|\| \|____ vlan 2055 \|\| . . . \|\|_________ vlan 2050 \|__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree	1.3.6.1.4.1.1872.2.1.19.1.1.4	OCTET STRING (SIZE(0..256))	read-only	mandatory
stgNewCfgTable OBJECT-TYPE The table of Spanning Tree Groups configuration in the new_config.	1.3.6.1.4.1.1872.2.1.19.2		not-accessible	mandatory
stgNewCfgTableEntry OBJECT-TYPE Information about a particular Spanning Tree Group configuration.	1.3.6.1.4.1.1872.2.1.19.2.1		not-accessible	mandatory
stgNewCfgIndex OBJECT-TYPE The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	1.3.6.1.4.1.1872.2.1.19.2.1.1	INTEGER (1..8)	read-only	mandatory
stgNewCfgState OBJECT-TYPE Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.2.1.2	INTEGER {on(1), off(2)}	read-write	mandatory
stgNewCfgDefaultCfg OBJECT-TYPE Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.	1.3.6.1.4.1.1872.2.1.19.2.1.3	INTEGER {default-config(1)}	read-write	mandatory
stgNewCfgAddVlan OBJECT-TYPE The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.	1.3.6.1.4.1.1872.2.1.19.2.1.4	INTEGER	read-write	mandatory
stgNewCfgRemoveVlan OBJECT-TYPE The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.	1.3.6.1.4.1.1872.2.1.19.2.1.5	INTEGER	read-write	mandatory
stgNewCfgVlanBmap1 OBJECT-TYPE The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree	1.3.6.1.4.1.1872.2.1.19.2.1.6	OCTET STRING (SIZE(0..256))	read-only	mandatory
stgNewCfgVlanBmap2 OBJECT-TYPE The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 2057 \|\| \|\| \|\| \|\|___ vlan 2056 \|\| \|____ vlan 2055 \|\| . . . \|\|_________ vlan 2050 \|__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree	1.3.6.1.4.1.1872.2.1.19.2.1.7	OCTET STRING (SIZE(0..256))	read-only	mandatory
stgCurCfgPortTable OBJECT-TYPE The table of Spanning Tree Group port configuration in the current_config.	1.3.6.1.4.1.1872.2.1.19.3		not-accessible	mandatory
stgCurCfgPortTableEntry OBJECT-TYPE Information about port configuration of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.3.1		not-accessible	mandatory
stgCurCfgStgIndex OBJECT-TYPE The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	1.3.6.1.4.1.1872.2.1.19.3.1.1	INTEGER	read-only	mandatory
stgCurCfgPortIndex OBJECT-TYPE The port identifier of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.3.1.2	INTEGER	read-only	mandatory
stgCurCfgPortState OBJECT-TYPE Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.3.1.3	INTEGER {on(1), off(2)}	read-only	mandatory
stgNewCfgPortTable OBJECT-TYPE The table of Spanning Tree Group port configuration in the new_config.	1.3.6.1.4.1.1872.2.1.19.4		not-accessible	mandatory
stgNewCfgPortTableEntry OBJECT-TYPE Information about port configuration of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.4.1		not-accessible	mandatory
stgNewCfgStgIndex OBJECT-TYPE The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	1.3.6.1.4.1.1872.2.1.19.4.1.1	INTEGER	read-only	mandatory
stgNewCfgPortIndex OBJECT-TYPE The port identifier of a particular Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.4.1.2	INTEGER	read-only	mandatory
stgNewCfgPortState OBJECT-TYPE Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	1.3.6.1.4.1.1872.2.1.19.4.1.3	INTEGER {on(1), off(2)}	read-write	mandatory