MIBs Depot

ALTEON-CHEETAH-LAYER4-MIB

Registered at
1.3.6.1.4.1.1872.2.5.4
Last updated
2009-08-05 00:00
Organization
Radware Ltd
Revisions
2009-08-05 00:00
Namespace
alteonos
Source file
ALTEON-CHEETAH-LAYER4-MIB
Digest
sha256:681821201056f82f7b619f90b685340bfa42354daba7b6b7cd14e98c52ff9148

Description

The MIB module for the Alteon OS Layer 4 configuration, statistics and information .

Contact

Lobby 1 (Visitors) and Lobby 2 (Deliveries) 575 Corporate Drive Mahwah, NJ 07430 support@radware.com

Imports

FromSymbols
ALTEON-ROOT-MIBaws-switch
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALTEON-CHEETAH-LAYER4-MIB
ALTEON-ROOT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
layer4Configs
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1
slbCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1
slbGeneralCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.1
slbCurCfgGlobalControl
OBJECT-TYPE
The global state of Server Load Balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.1.1INTEGER {enabled(2), disabled(3)}read-onlycurrent
slbNewCfgGlobalControl
OBJECT-TYPE
The global state of Server Load Balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.1.2INTEGER {enabled(2), disabled(3)}read-writecurrent
slbCurCfgImask
OBJECT-TYPE
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.3IpAddressread-onlycurrent
slbNewCfgImask
OBJECT-TYPE
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.4IpAddressread-writecurrent
slbCurCfgMnet
OBJECT-TYPE
The management network - corresponding to the mnet command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.5IpAddressread-onlycurrent
slbNewCfgMnet
OBJECT-TYPE
The management network - corresponding to the mnet command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.6IpAddressread-writecurrent
slbCurCfgMmask
OBJECT-TYPE
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.7IpAddressread-onlycurrent
slbNewCfgMmask
OBJECT-TYPE
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.8IpAddressread-writecurrent
slbCurCfgRadiusAuthenString
OBJECT-TYPE
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
1.3.6.1.4.1.1872.2.5.4.1.1.1.9DisplayString (SIZE(0..32))read-onlycurrent
slbNewCfgRadiusAuthenString
OBJECT-TYPE
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
1.3.6.1.4.1.1872.2.5.4.1.1.1.10DisplayString (SIZE(0..32))read-writecurrent
slbCurCfgDirectMode
OBJECT-TYPE
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.5.4.1.1.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgDirectMode
OBJECT-TYPE
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.5.4.1.1.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgPmask
OBJECT-TYPE
The persistent mask - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.13IpAddressread-onlycurrent
slbNewCfgPmask
OBJECT-TYPE
The persistent mask - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.14IpAddressread-writecurrent
slbCurCfgGrace
OBJECT-TYPE
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.5.4.1.1.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgGrace
OBJECT-TYPE
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.5.4.1.1.1.16INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgVirtMatrixArch
OBJECT-TYPE
Enable or disable Virtual Matrix Architecture.
1.3.6.1.4.1.1872.2.5.4.1.1.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVirtMatrixArch
OBJECT-TYPE
Enable or disable Virtual Matrix Architecture.
1.3.6.1.4.1.1872.2.5.4.1.1.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgFastage
OBJECT-TYPE
Session table fast-age (1 sec) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.19INTEGER (0..7)read-onlycurrent
slbNewCfgFastage
OBJECT-TYPE
Session table fast-age (1 sec) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.20INTEGER (0..7)read-writecurrent
slbCurCfgSlowage
OBJECT-TYPE
Session table slow-age (2 min) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.21INTEGER (0..15)read-onlyobsolete
slbNewCfgSlowage
OBJECT-TYPE
Session table slow-age (2 min) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.22INTEGER (0..15)read-writeobsolete
slbCurCfgTpcp
OBJECT-TYPE
Enable or disable Transparent Proxy Cache Protocol.
1.3.6.1.4.1.1872.2.5.4.1.1.1.23INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgTpcp
OBJECT-TYPE
Enable or disable Transparent Proxy Cache Protocol.
1.3.6.1.4.1.1872.2.5.4.1.1.1.24INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgMetricInterval
OBJECT-TYPE
The interval of response and bandwidth metric updates.
1.3.6.1.4.1.1872.2.5.4.1.1.1.25INTEGER (1..256)read-onlycurrent
slbNewCfgMetricInterval
OBJECT-TYPE
The interval of response and bandwidth metric updates.
1.3.6.1.4.1.1872.2.5.4.1.1.1.26INTEGER (1..256)read-writecurrent
slbCurCfgLdapVersion
OBJECT-TYPE
The version number for LDAP.
1.3.6.1.4.1.1872.2.5.4.1.1.1.27INTEGER {version2(1), version3(2)}read-onlycurrent
slbNewCfgLdapVersion
OBJECT-TYPE
The Version number of LDAP.
1.3.6.1.4.1.1872.2.5.4.1.1.1.28INTEGER {version2(1), version3(2)}read-writecurrent
slbCurCfgAllowHttpHc
OBJECT-TYPE
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured.
1.3.6.1.4.1.1872.2.5.4.1.1.1.29INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgAllowHttpHc
OBJECT-TYPE
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured.
1.3.6.1.4.1.1872.2.5.4.1.1.1.30INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSubmac
OBJECT-TYPE
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution.
1.3.6.1.4.1.1872.2.5.4.1.1.1.31INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSubmac
OBJECT-TYPE
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution.
1.3.6.1.4.1.1872.2.5.4.1.1.1.32INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgProxyGratArp
OBJECT-TYPE
Enable or disable Proxy IP Gratuitous ARP.
1.3.6.1.4.1.1872.2.5.4.1.1.1.33INTEGER {enabled(1), disabled(2)}read-onlyobsolete
slbNewCfgProxyGratArp
OBJECT-TYPE
Enable or disable Proxy IP Gratuitous ARP.
1.3.6.1.4.1.1872.2.5.4.1.1.1.34INTEGER {enabled(1), disabled(2)}read-writeobsolete
slbCurCfgRtsVlan
OBJECT-TYPE
Enable or disable use VLAN info for real server lookup
1.3.6.1.4.1.1872.2.5.4.1.1.1.35INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgRtsVlan
OBJECT-TYPE
Enable or disable use VLAN info for real server lookup
1.3.6.1.4.1.1872.2.5.4.1.1.1.36INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgVirtualServiceStats
OBJECT-TYPE
Enable/disable Virtual Service Statistics.
1.3.6.1.4.1.1872.2.5.4.1.1.1.37INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVirtualServiceStats
OBJECT-TYPE
Enable/disable Virtual Service Statistics.
1.3.6.1.4.1.1872.2.5.4.1.1.1.38INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSlbSessAtkIntrval
OBJECT-TYPE
Set SLB session attack inspection interval.
1.3.6.1.4.1.1872.2.5.4.1.1.1.39INTEGER (0..3600)read-onlycurrent
slbNewCfgSlbSessAtkIntrval
OBJECT-TYPE
Set SLB session attack inspection interval.
1.3.6.1.4.1.1872.2.5.4.1.1.1.40INTEGER (0..3600)read-writecurrent
slbCurCfgSlbSessAtkAllowlim
OBJECT-TYPE
Set SLB session attack alert allowable limit.
1.3.6.1.4.1.1872.2.5.4.1.1.1.41INTEGER (1..11999961)read-onlycurrent
slbNewCfgSlbSessAtkAllowlim
OBJECT-TYPE
Set SLB session attack alert allowable limit.
1.3.6.1.4.1.1872.2.5.4.1.1.1.42INTEGER (1..11999961)read-writecurrent
slbCurCfgNewSlowage
OBJECT-TYPE
Session table slow-age (2 min) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.43INTEGER (0..14)read-onlycurrent
slbNewCfgNewSlowage
OBJECT-TYPE
Session table slow-age (2 min) period bit shift.
1.3.6.1.4.1.1872.2.5.4.1.1.1.44INTEGER (0..14)read-writecurrent
slbCurCfgPortBind
OBJECT-TYPE
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable.
1.3.6.1.4.1.1872.2.5.4.1.1.1.45INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgPortBind
OBJECT-TYPE
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable.
1.3.6.1.4.1.1872.2.5.4.1.1.1.46INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgVmaSrcPort
OBJECT-TYPE
Enable/disable VMA source port.
1.3.6.1.4.1.1872.2.5.4.1.1.1.47INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVmaSrcPort
OBJECT-TYPE
Enable/disable VMA source port.
1.3.6.1.4.1.1872.2.5.4.1.1.1.48INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgIpTcpCksum
OBJECT-TYPE
Enable/disable Layer 7 IP/TCP Checksum Validation.
1.3.6.1.4.1.1872.2.5.4.1.1.1.49INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgIpTcpCksum
OBJECT-TYPE
Enable/disable Layer 7 IP/TCP Checksum Validation.
1.3.6.1.4.1.1872.2.5.4.1.1.1.50INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgAuxRipHash
OBJECT-TYPE
Enable/disable Include RIP in AUX table hashing.
1.3.6.1.4.1.1872.2.5.4.1.1.1.51INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgAuxRipHash
OBJECT-TYPE
Enable/disable Include RIP in AUX table hashing.
1.3.6.1.4.1.1872.2.5.4.1.1.1.52INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgClearBackup
OBJECT-TYPE
Enable/Disable clear backup in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.53INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgClearBackup
OBJECT-TYPE
Enable/Disable clear backup in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.54INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgmStat
OBJECT-TYPE
Measuring period for Acceleration, HTTP and SSL offloading statistics in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.55INTEGER (1..3600)read-onlycurrent
slbNewCfgmStat
OBJECT-TYPE
Measuring period for Acceleration, HTTP and SSL offloading statistics in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.56INTEGER (1..3600)read-writecurrent
slbCurCfgvStat
OBJECT-TYPE
Enable/Disable Virtual Service Statistics in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.57INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgvStat
OBJECT-TYPE
Enable/Disable Virtual Service Statistics in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.58INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgVmaDip
OBJECT-TYPE
Enable/Disable VMA with destination IP in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.59INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVmaDip
OBJECT-TYPE
Enable/Disable VMA with destination IP in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.60INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgClsRst
OBJECT-TYPE
Enable/Disable Session clear on RST in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.61INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgClsRst
OBJECT-TYPE
Enable/Disable Session clear on RST in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.62INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgRtsIpLkp
OBJECT-TYPE
Enable/Disable RTS-IP lookup in the current config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.63INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgRtsIpLkp
OBJECT-TYPE
Enable/Disable RTS-IP lookup in the new config.
1.3.6.1.4.1.1872.2.5.4.1.1.1.64INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgPprefix
OBJECT-TYPE
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.65INTEGER (1..128)read-onlycurrent
slbNewCfgPprefix
OBJECT-TYPE
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.5.4.1.1.1.66INTEGER (1..128)read-writecurrent
slbCurCfgSubdmac
OBJECT-TYPE
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution.
1.3.6.1.4.1.1872.2.5.4.1.1.1.67INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSubdmac
OBJECT-TYPE
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution.
1.3.6.1.4.1.1872.2.5.4.1.1.1.68INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgpVlanTag
OBJECT-TYPE
Enable or disable preserving vlan tag during packet forwarding
1.3.6.1.4.1.1872.2.5.4.1.1.1.69INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgpVlanTag
OBJECT-TYPE
Enable or disable preserving vlan tag during packet forwarding
1.3.6.1.4.1.1872.2.5.4.1.1.1.70INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgNmask
OBJECT-TYPE
The session mask in the current config block.
1.3.6.1.4.1.1872.2.5.4.1.1.1.71IpAddressread-onlycurrent
slbNewCfgNmask
OBJECT-TYPE
The session mask in the new config block.
1.3.6.1.4.1.1872.2.5.4.1.1.1.72IpAddressread-writecurrent
realServerCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.2
slbRealServerMaxSize
OBJECT-TYPE
The maximum number of entries in SLB RealServerTable.
1.3.6.1.4.1.1872.2.5.4.1.1.2.1Integer32read-onlycurrent
slbCurCfgRealServerTable
OBJECT-TYPE
The table of Real Server configuration in the current_config.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2not-accessiblecurrent
slbCurCfgRealServerEntry
OBJECT-TYPE
Information about a particular Real Server configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1not-accessiblecurrent
slbCurCfgRealServerIndex
OBJECT-TYPE
The real server number
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.1Integer32read-onlycurrent
slbCurCfgRealServerIpAddr
OBJECT-TYPE
IP address of the real server identified by the instance of the slbRealServerIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.2IpAddressread-onlycurrent
slbCurCfgRealServerWeight
OBJECT-TYPE
The server weight.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.3INTEGER (1..48)read-onlycurrent
slbCurCfgRealServerMaxConns
OBJECT-TYPE
The maximum number of connections that are allowed.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.4INTEGER (0..200000)read-onlycurrent
slbCurCfgRealServerTimeOut
OBJECT-TYPE
The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.5INTEGER (2..32768)read-onlycurrent
slbCurCfgRealServerBackUp
OBJECT-TYPE
The backup server number for this server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.6Integer32read-onlycurrent
slbCurCfgRealServerPingInterval
OBJECT-TYPE
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.7INTEGER (0..60)read-onlycurrent
slbCurCfgRealServerFailRetry
OBJECT-TYPE
The number of failed attempts to declare this server DOWN.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.8INTEGER (1..63)read-onlycurrent
slbCurCfgRealServerSuccRetry
OBJECT-TYPE
The number of successful attempts to declare a server UP.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.9INTEGER (1..63)read-onlycurrent
slbCurCfgRealServerState
OBJECT-TYPE
Enable or disable the server and remove the existing sessions using disabled-with-fastage option.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.10INTEGER {enabled(2), disabled(3), disabled-with-fastage(4)}read-onlycurrent
slbCurCfgRealServerType
OBJECT-TYPE
The server type. It participates in global server load balancing when it is configured as remote-server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.11INTEGER {local-server(1), remote-server(2)}read-onlycurrent
slbCurCfgRealServerName
OBJECT-TYPE
The name of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.12DisplayString (SIZE(0..31))read-onlycurrent
slbCurCfgRealServerUrlBmap
OBJECT-TYPE
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.13OCTET STRINGread-onlycurrent
slbCurCfgRealServerCookie
OBJECT-TYPE
The real server that will handle client requests that doesn't contain an URL cookie if Cookie loadbalance is enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerExcludeStr
OBJECT-TYPE
The real server will handle requests that don't match the loadbalance string if it is enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerSubmac
OBJECT-TYPE
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.16INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerProxy
OBJECT-TYPE
The real server config to enable/disable client proxy operation.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerLdapwr
OBJECT-TYPE
The real server config to enable/disable LDAP write server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.18INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerOid
OBJECT-TYPE
The OID to be sent in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.19DisplayString (SIZE(0..128))read-onlycurrent
slbCurCfgRealServerCommString
OBJECT-TYPE
The community string to be used in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.20DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgRealServerIdsvlan
OBJECT-TYPE
The VLAN to be associated with the IDS server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.21INTEGER (0..4090)read-onlycurrent
slbCurCfgRealServerIdsport
OBJECT-TYPE
The port to be connected to the IDS server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.22Integer32read-onlycurrent
slbCurCfgRealServerAvail
OBJECT-TYPE
The remote real server Global SLB availability.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.23INTEGER (1..48)read-onlycurrent
slbCurCfgRealServerFastHealthCheck
OBJECT-TYPE
The real server config to enable/disable Fast Health Check Operation.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.24INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerSubdmac
OBJECT-TYPE
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.25INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerOverflow
OBJECT-TYPE
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.26INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerBkpPreempt
OBJECT-TYPE
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.27INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgRealServerIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.28INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
slbCurCfgRealServerIpv6Addr
OBJECT-TYPE
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.29DisplayString (SIZE(0..40))read-onlycurrent
slbNewCfgRealServerTable
OBJECT-TYPE
The table of Real Server configuration in the new_config.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3not-accessiblecurrent
slbNewCfgRealServerEntry
OBJECT-TYPE
Information about a particular Real Server configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1not-accessiblecurrent
slbNewCfgRealServerIndex
OBJECT-TYPE
The real server number
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.1Integer32read-onlycurrent
slbNewCfgRealServerIpAddr
OBJECT-TYPE
IP address of the real server identified by the instance of slbRealServerIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.2IpAddressread-createcurrent
slbNewCfgRealServerWeight
OBJECT-TYPE
The server weight.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.3INTEGER (1..48)read-createcurrent
slbNewCfgRealServerMaxConns
OBJECT-TYPE
The maximum number of connections that are allowed.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.4INTEGER (0..200000)read-createcurrent
slbNewCfgRealServerTimeOut
OBJECT-TYPE
The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.5INTEGER (2..32768)read-createcurrent
slbNewCfgRealServerBackUp
OBJECT-TYPE
The backup server number for this server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.6Integer32read-createcurrent
slbNewCfgRealServerPingInterval
OBJECT-TYPE
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.7INTEGER (0..60)read-createcurrent
slbNewCfgRealServerFailRetry
OBJECT-TYPE
The number of failed attempts to declare this server DOWN.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.8INTEGER (1..63)read-createcurrent
slbNewCfgRealServerSuccRetry
OBJECT-TYPE
The number of successful attempts to declare a server UP.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.9INTEGER (1..63)read-createcurrent
slbNewCfgRealServerState
OBJECT-TYPE
Enable or disable the server and remove the existing sessions using disabled-with-fastage option.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.10INTEGER {enabled(2), disabled(3), disabled-with-fastage(4)}read-createcurrent
slbNewCfgRealServerDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.11INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgRealServerType
OBJECT-TYPE
The server type. It participates in global server load balancing when it is configured as remote-server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.12INTEGER {local-server(1), remote-server(2)}read-createcurrent
slbNewCfgRealServerName
OBJECT-TYPE
The name of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.13DisplayString (SIZE(0..31))read-createcurrent
slbNewCfgRealServerUrlBmap
OBJECT-TYPE
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.14OCTET STRINGread-onlycurrent
slbNewCfgRealServerAddUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.15Integer32read-createcurrent
slbNewCfgRealServerRemUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.16Integer32read-createcurrent
slbNewCfgRealServerCookie
OBJECT-TYPE
Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.17INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerExcludeStr
OBJECT-TYPE
Enable or disable exclusionary matching string on real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerSubmac
OBJECT-TYPE
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerProxy
OBJECT-TYPE
The real server config to enable/disable client proxy operation.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerLdapwr
OBJECT-TYPE
The real server config to enable/disable LDAP write server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.21INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerOid
OBJECT-TYPE
The OID to be sent in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.22DisplayString (SIZE(0..128))read-createcurrent
slbNewCfgRealServerCommString
OBJECT-TYPE
The community string to be used in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.23DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgRealServerIdsvlan
OBJECT-TYPE
The VLAN to be associated with IDS server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.24INTEGER (0..4090)read-createcurrent
slbNewCfgRealServerIdsport
OBJECT-TYPE
The port to be connected to IDS server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.25Integer32read-createcurrent
slbNewCfgRealServerAvail
OBJECT-TYPE
The remote real server Global SLB availability.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.26INTEGER (1..48)read-createcurrent
slbNewCfgRealServerFastHealthCheck
OBJECT-TYPE
The real server config to enable/disable Fast Health Check Operation.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.27INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerSubdmac
OBJECT-TYPE
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.28INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerOverflow
OBJECT-TYPE
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.29INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerBkpPreempt
OBJECT-TYPE
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.30INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgRealServerIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.31INTEGER {ipv4(1), ipv6(2)}read-createcurrent
slbNewCfgRealServerIpv6Addr
OBJECT-TYPE
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.32DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgRealServerNxtRportIdx
OBJECT-TYPE
The next available free slot index number, to add the real port to the server. Value 0 will be returned if no free slot available.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.33INTEGER (0..64)read-onlycurrent
slbNewCfgRealServerNxtBuddyIdx
OBJECT-TYPE
The next available free slot Buddy index number, to add the Buddy Server to the Real server. Value 0 will be returned if no free slot available.
1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.34INTEGER (0..4)read-onlycurrent
slbRealServPortTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB RealServPortTable.
1.3.6.1.4.1.1872.2.5.4.1.1.2.4Integer32read-onlycurrent
slbCurCfgRealServPortTable
OBJECT-TYPE
The table of real server service ports.
1.3.6.1.4.1.1872.2.5.4.1.1.2.5not-accessiblecurrent
slbCurCfgRealServPortEntry
OBJECT-TYPE
A row in the real server service ports table.
1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1not-accessiblecurrent
slbCurCfgRealServIndex
OBJECT-TYPE
The number of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.1Integer32read-onlycurrent
slbCurCfgRealServPortIndex
OBJECT-TYPE
The port index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.2Integer32read-onlycurrent
slbCurCfgRealServRealPort
OBJECT-TYPE
The layer4 real service port number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.3INTEGER (2..65534)read-onlycurrent
slbNewCfgRealServPortTable
OBJECT-TYPE
The table of real server service ports.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6not-accessiblecurrent
slbNewCfgRealServPortEntry
OBJECT-TYPE
A row in the real server service ports table.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1not-accessiblecurrent
slbNewCfgRealServIndex
OBJECT-TYPE
The number of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.1Integer32read-onlycurrent
slbNewCfgRealServPortIndex
OBJECT-TYPE
The port index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.2Integer32read-onlycurrent
slbNewCfgRealServRealPort
OBJECT-TYPE
The layer4 real service port number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.3INTEGER (2..65534)read-createcurrent
slbNewCfgRealServPortDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgRealServRealPortFreeIdx
OBJECT-TYPE
The first free port index number of the real server. Value 0 will be returned when all 64 ports are configured for a real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.5INTEGER (0..64)read-createcurrent
slbBuddyTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB real buddy server table.
1.3.6.1.4.1.1872.2.5.4.1.1.2.7Integer32read-onlycurrent
slbCurCfgBuddyTable
OBJECT-TYPE
The table of buddy information.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8not-accessiblecurrent
slbCurCfgBuddyEntry
OBJECT-TYPE
A row in the buddy server table.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1not-accessiblecurrent
slbCurCfgRealSerIndex
OBJECT-TYPE
The number of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.1Integer32read-onlycurrent
slbCurCfgBuddyIndex
OBJECT-TYPE
The buddy index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.2Integer32read-onlycurrent
slbCurCfgBuddyRealIndex
OBJECT-TYPE
The buddy server's real server number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.3Integer32read-onlycurrent
slbCurCfgBuddyGroupIndex
OBJECT-TYPE
The buddy server's real group number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.4Integer32read-onlycurrent
slbCurCfgBuddyService
OBJECT-TYPE
The buddy server's service.
1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.5INTEGER (9..65534)read-onlycurrent
slbNewCfgBuddyTable
OBJECT-TYPE
The table of buddy servers.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9not-accessiblecurrent
slbNewCfgBuddyEntry
OBJECT-TYPE
A row in the real server buddy table.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1not-accessiblecurrent
slbNewCfgRealSerIndex
OBJECT-TYPE
The number of the real server.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.1Integer32read-onlycurrent
slbNewCfgBuddyIndex
OBJECT-TYPE
The buddy index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.2Integer32read-onlycurrent
slbNewCfgBuddyRealIndex
OBJECT-TYPE
The buddy server's real server number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.3Integer32read-createcurrent
slbNewCfgBuddyGroupIndex
OBJECT-TYPE
The buddy server's real group number.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.4Integer32read-createcurrent
slbNewCfgBuddyService
OBJECT-TYPE
The buddy server's service.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.5INTEGER (9..65534)read-createcurrent
slbNewCfgBuddyDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.6INTEGER {other(1), delete(2)}read-createcurrent
realServerGroupCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.3
slbGroupTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB group tables.
1.3.6.1.4.1.1872.2.5.4.1.1.3.1Integer32read-onlycurrent
slbGroupMaxIdsSize
OBJECT-TYPE
The maximum number of groups IDS can be enabled on.
1.3.6.1.4.1.1872.2.5.4.1.1.3.2Integer32read-onlycurrent
slbCurCfgGroupTable
OBJECT-TYPE
The table of groups
1.3.6.1.4.1.1872.2.5.4.1.1.3.3not-accessiblecurrent
slbCurCfgGroupEntry
OBJECT-TYPE
A row in the slbCurCfgGroupTable
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1not-accessiblecurrent
slbCurCfgGroupIndex
OBJECT-TYPE
The group number for which the information pertains.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.1Integer32read-onlycurrent
slbCurCfgGroupRealServers
OBJECT-TYPE
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.2OCTET STRINGread-onlycurrent
slbCurCfgGroupMetric
OBJECT-TYPE
The metric used to select next server in group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.3INTEGER {roundRobin(1), leastConnections(2), minMisses(3), hash(4), response(5), bandwidth(6), phash(7), svcLeast(8)}read-onlycurrent
slbCurCfgGroupBackupServer
OBJECT-TYPE
The backup real server for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.4Integer32read-onlycurrent
slbCurCfgGroupBackupGroup
OBJECT-TYPE
The backup real server group for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.5Integer32read-onlycurrent
slbCurCfgGroupHealthCheckUrl
OBJECT-TYPE
The specific content which is examined during health checks. The content depends on the type of health check.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.6DisplayString (SIZE(0..127))read-onlycurrent
slbCurCfgGroupHealthCheckLayer
OBJECT-TYPE
The OSI layer at which servers are health checked.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.7INTEGER {icmp(1), tcp(2), http(3), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19), script9(20), script10(21), script11(22), script12(23), script13(24), script14(25), script15(26), script16(27), link(28), wsp(29), wtls(30), ldap(31), udpdns(32), arp(33), snmp1(34), snmp2(35), snmp3(36), snmp4(37), snmp5(38), radiusacs(39), tftp(40), wtp(41), rtsp(42), sipping(43), httphead(44), sipoptions(45), wts(46), dhcp(47), radiusaa(48), sslv3(49), script17(116), script18(117), script19(118), script20(119), script21(120), script22(121), script23(122), script24(123), script25(124), script26(125), script27(126), script28(127), script29(128), script30(129), script31(130), script32(131), script33(132), script34(133), script35(134), script36(135), script37(136), script38(137), script39(138), script40(139), script41(140), script42(141), script43(142), script44(143), script45(144), script46(145), script47(146), script48(147), script49(148), script50(149), script51(150), script52(151), script53(152), script54(153), script55(154), script56(155), script57(156), script58(157), script59(158), script60(159), script61(160), script62(161), script63(162), script64(163)}read-onlycurrent
slbCurCfgGroupName
OBJECT-TYPE
The name of the real server group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.8DisplayString (SIZE(0..31))read-onlycurrent
slbCurCfgGroupRealThreshold
OBJECT-TYPE
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.9INTEGER (0..15)read-onlycurrent
slbCurCfgGroupVipHealthCheck
OBJECT-TYPE
Enable or disable VIP health checking in DSR mode.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgGroupIdsState
OBJECT-TYPE
Enable or disable intrusion detection.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgGroupIdsPort
OBJECT-TYPE
The intrusion detection port. A value of 1 is invalid.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.12INTEGER (0..65534)read-onlycurrent
slbCurCfgGroupIdsFlood
OBJECT-TYPE
Enable or disable intrusion detection group flood.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.13INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgGroupMinmissHash
OBJECT-TYPE
24|32 number of ip bits used for minmisses hash in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.14INTEGER {minmiss-24(1), minmiss-32(2)}read-onlycurrent
slbCurCfgGroupPhashMask
OBJECT-TYPE
IP address mask used by the persistent hash metric.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.15IpAddressread-onlycurrent
slbCurCfgGroupRmetric
OBJECT-TYPE
The metric used to select next rport in server.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.16INTEGER {roundRobin(1), hash(2), leastConnections(3)}read-onlycurrent
slbCurCfgGroupHealthCheckFormula
OBJECT-TYPE
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.17DisplayString (SIZE(0..31))read-onlycurrent
slbCurCfgGroupOperatorAccess
OBJECT-TYPE
Enable or disable access to this group for operator.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.18INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgGroupWlm
OBJECT-TYPE
The Workload Manager for this Group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.19Integer32read-onlycurrent
slbCurCfgGroupRadiusAuthenString
OBJECT-TYPE
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.20DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgGroupSecBackupGroup
OBJECT-TYPE
The Secondary backup real server group for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.21Integer32read-onlycurrent
slbCurCfgGroupSlowstart
OBJECT-TYPE
The slow-start time for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.22Integer32read-onlycurrent
slbCurCfgGroupMinThreshold
OBJECT-TYPE
The minimum threshold value for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.23Integer32read-onlycurrent
slbCurCfgGroupMaxThreshold
OBJECT-TYPE
The maximum threshold value for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.24Integer32read-onlycurrent
slbCurCfgGroupIpVer
OBJECT-TYPE
The type of real server group IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.25INTEGER {ipv4(1), ipv6(2), mixed(3)}read-onlycurrent
slbCurCfgGroupBackup
OBJECT-TYPE
The backup real group or real server for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.26DisplayString (SIZE(0..255))read-onlycurrent
slbNewCfgGroupTable
OBJECT-TYPE
The table of groups
1.3.6.1.4.1.1872.2.5.4.1.1.3.4not-accessiblecurrent
slbNewCfgGroupEntry
OBJECT-TYPE
A row in the slbNewCfgGroupTable
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1not-accessiblecurrent
slbNewCfgGroupIndex
OBJECT-TYPE
The group number for which the information pertains.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.1Integer32read-onlycurrent
slbNewCfgGroupRealServers
OBJECT-TYPE
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.2OCTET STRINGread-onlycurrent
slbNewCfgGroupAddServer
OBJECT-TYPE
The real server to be added to the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.3Integer32read-createcurrent
slbNewCfgGroupRemoveServer
OBJECT-TYPE
The real server to be removed from the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.4Integer32read-createcurrent
slbNewCfgGroupMetric
OBJECT-TYPE
The metric used to select next server in group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.5INTEGER {roundRobin(1), leastConnections(2), minMisses(3), hash(4), response(5), bandwidth(6), phash(7), svcLeast(8)}read-createcurrent
slbNewCfgGroupBackupServer
OBJECT-TYPE
The backup real server for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.6Integer32read-createcurrent
slbNewCfgGroupBackupGroup
OBJECT-TYPE
The backup real server group for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.7Integer32read-createcurrent
slbNewCfgGroupHealthCheckUrl
OBJECT-TYPE
The specific content which is examined during health checks. The content depends on the type of health check.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.8DisplayString (SIZE(0..127))read-createcurrent
slbNewCfgGroupHealthCheckLayer
OBJECT-TYPE
The OSI layer at which servers are health checked.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.9INTEGER {icmp(1), tcp(2), http(3), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19), script9(20), script10(21), script11(22), script12(23), script13(24), script14(25), script15(26), script16(27), link(28), wsp(29), wtls(30), ldap(31), udpdns(32), arp(33), snmp1(34), snmp2(35), snmp3(36), snmp4(37), snmp5(38), radiusacs(39), tftp(40), wtp(41), rtsp(42), sipping(43), httphead(44), sipoptions(45), wts(46), dhcp(47), radiusaa(48), sslv3(49), script17(116), script18(117), script19(118), script20(119), script21(120), script22(121), script23(122), script24(123), script25(124), script26(125), script27(126), script28(127), script29(128), script30(129), script31(130), script32(131), script33(132), script34(133), script35(134), script36(135), script37(136), script38(137), script39(138), script40(139), script41(140), script42(141), script43(142), script44(143), script45(144), script46(145), script47(146), script48(147), script49(148), script50(149), script51(150), script52(151), script53(152), script54(153), script55(154), script56(155), script57(156), script58(157), script59(158), script60(159), script61(160), script62(161), script63(162), script64(163)}read-createcurrent
slbNewCfgGroupName
OBJECT-TYPE
The name of the real server group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.10DisplayString (SIZE(0..31))read-createcurrent
slbNewCfgGroupRealThreshold
OBJECT-TYPE
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.11INTEGER (0..15)read-createcurrent
slbNewCfgGroupVipHealthCheck
OBJECT-TYPE
Enable or disable VIP health checking in DSR mode.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgGroupIdsState
OBJECT-TYPE
Enable or disable intrusion detection.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.13INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgGroupIdsPort
OBJECT-TYPE
The intrusion detection port. A value of 1 is invalid.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.14INTEGER (0..65534)read-createcurrent
slbNewCfgGroupDelete
OBJECT-TYPE
By setting the value to delete(2), the entire group is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.15INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgGroupIdsFlood
OBJECT-TYPE
Enable or disable intrusion detection group flood.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgGroupMinmissHash
OBJECT-TYPE
24|32 number of sip bits used for minmisses hash in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.17INTEGER {minmiss-24(1), minmiss-32(2)}read-createcurrent
slbNewCfgGroupPhashMask
OBJECT-TYPE
IP address mask used by the persistent hash metric.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.18IpAddressread-createcurrent
slbNewCfgGroupRmetric
OBJECT-TYPE
The metric used to select next rport in server.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.19INTEGER {roundRobin(1), hash(2), leastConnections(3)}read-createcurrent
slbNewCfgGroupHealthCheckFormula
OBJECT-TYPE
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.20DisplayString (SIZE(0..31))read-createcurrent
slbNewCfgGroupOperatorAccess
OBJECT-TYPE
Enable or disable access to this group for operator.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.21INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgGroupWlm
OBJECT-TYPE
The Workload Manager for this Group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.22Integer32read-createcurrent
slbNewCfgGroupRadiusAuthenString
OBJECT-TYPE
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.23DisplayString (SIZE(0..32))read-writecurrent
slbNewCfgGroupSecBackupGroup
OBJECT-TYPE
The Secondary backup real server group for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.24Integer32read-createcurrent
slbNewCfgGroupSlowstart
OBJECT-TYPE
The slow-start time for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.25Integer32read-createcurrent
slbNewCfgGroupMinThreshold
OBJECT-TYPE
The minimum threshold value for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.26Integer32read-createcurrent
slbNewCfgGroupMaxThreshold
OBJECT-TYPE
The maximum threshold value for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.27Integer32read-createcurrent
slbNewCfgGroupIpVer
OBJECT-TYPE
The type of real server group IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.28INTEGER {ipv4(1), ipv6(2), mixed(3)}read-createcurrent
slbNewCfgGroupBackup
OBJECT-TYPE
The backup real group or real server for this group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.29DisplayString (SIZE(0..255))read-onlycurrent
slbNewCfgGroupBackupType
OBJECT-TYPE
Backup type of the real server group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.30INTEGER {none(1), server(2), group(3)}read-createcurrent
slbCurCfgGroupRealServerTable
OBJECT-TYPE
The table of real servers per group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.5not-accessiblecurrent
slbCurCfgGroupRealServerEntry
OBJECT-TYPE
A row in the Real server group table.
1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1not-accessiblecurrent
slbCurCfgRealServGroupIndex
OBJECT-TYPE
The real server group index.
1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.1Integer32read-onlycurrent
slbCurCfgGroupRealServIndex
OBJECT-TYPE
The real server index.
1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.2Integer32read-onlycurrent
slbCurCfgGroupRealServerState
OBJECT-TYPE
Enable/disable a real server gracefully on a per group basis.
1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgGroupRealServerTable
OBJECT-TYPE
The table of real server per group.
1.3.6.1.4.1.1872.2.5.4.1.1.3.6not-accessiblecurrent
slbNewCfgGroupRealServerEntry
OBJECT-TYPE
A row in the Real server group table.
1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1not-accessiblecurrent
slbNewCfgRealServGroupIndex
OBJECT-TYPE
The real server group index.
1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.1Integer32read-onlycurrent
slbNewCfgGroupRealServIndex
OBJECT-TYPE
The real server index.
1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.2Integer32read-onlycurrent
slbNewCfgGroupRealServerState
OBJECT-TYPE
Enable/disable a real server gracefully on a per group basis.
1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.3INTEGER {enabled(1), disabled(2)}read-createcurrent
virtualServerCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.4
slbVirtServerTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB VirtServerTable.
1.3.6.1.4.1.1872.2.5.4.1.1.4.1Integer32read-onlycurrent
slbCurCfgVirtServerTable
OBJECT-TYPE
The table of virtual Servers.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2not-accessiblecurrent
slbCurCfgVirtualServerEntry
OBJECT-TYPE
A row in the virtual server table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1not-accessiblecurrent
slbCurCfgVirtServerIndex
OBJECT-TYPE
Virtual Server Number
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.1Integer32read-onlycurrent
slbCurCfgVirtServerIpAddress
OBJECT-TYPE
IP address of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.2IpAddressread-onlycurrent
slbCurCfgVirtServerLayer3Only
OBJECT-TYPE
Enable or disable layer3 only balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.3INTEGER {layer3Only(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServerState
OBJECT-TYPE
Enable or disable the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.4INTEGER {enabled(2), disabled(3)}read-onlycurrent
slbCurCfgVirtServerDname
OBJECT-TYPE
The domain name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.5DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServerBwmContract
OBJECT-TYPE
The default BW contract of virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.6Integer32read-onlycurrent
slbCurCfgVirtServerWeight
OBJECT-TYPE
The virtual server Global SLB weight.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.7INTEGER (1..48)read-onlycurrent
slbCurCfgVirtServerAvail
OBJECT-TYPE
The virtual server Global SLB availability.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.8INTEGER (1..48)read-onlycurrent
slbCurCfgVirtServerRule
OBJECT-TYPE
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.9OCTET STRINGread-onlycurrent
slbCurCfgVirtServerVname
OBJECT-TYPE
The name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.10DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServerIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.11INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
slbCurCfgVirtServerIpv6Addr
OBJECT-TYPE
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.12DisplayString (SIZE(0..40))read-onlycurrent
slbCurCfgVirtServerCReset
OBJECT-TYPE
Enable/disable client connection reset for invalid VPORT.
1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.13INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVirtServerTable
OBJECT-TYPE
The table of virtual Servers.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3not-accessiblecurrent
slbNewCfgVirtualServerEntry
OBJECT-TYPE
A row in the virtual server table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1not-accessiblecurrent
slbNewCfgVirtServerIndex
OBJECT-TYPE
The Virtual Server Number
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.1Integer32read-onlycurrent
slbNewCfgVirtServerIpAddress
OBJECT-TYPE
IP address of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.2IpAddressread-createcurrent
slbNewCfgVirtServerLayer3Only
OBJECT-TYPE
Enable or disable layer3 only balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.3INTEGER {layer3Only(1), disabled(2)}read-createcurrent
slbNewCfgVirtServerState
OBJECT-TYPE
Enable or disable the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.4INTEGER {enabled(2), disabled(3)}read-createcurrent
slbNewCfgVirtServerDname
OBJECT-TYPE
The domain name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.6DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServerBwmContract
OBJECT-TYPE
The default BW contract number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.7Integer32read-createcurrent
slbNewCfgVirtServerDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.8INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgVirtServerWeight
OBJECT-TYPE
The virtual server Global SLB weight.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.9INTEGER (1..48)read-createcurrent
slbNewCfgVirtServerAvail
OBJECT-TYPE
The virtual server Global SLB availability.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.10INTEGER (1..48)read-createcurrent
slbNewCfgVirtServerRule
OBJECT-TYPE
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.11OCTET STRINGread-onlycurrent
slbNewCfgVirtServerAddRule
OBJECT-TYPE
The rule to be added to the domain. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.12Integer32read-createcurrent
slbNewCfgVirtServerRemoveRule
OBJECT-TYPE
The rule to be removed from the domain. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.13Integer32read-createcurrent
slbNewCfgVirtServerVname
OBJECT-TYPE
The name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.14DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServerIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.15INTEGER {ipv4(1), ipv6(2)}read-createcurrent
slbNewCfgVirtServerIpv6Addr
OBJECT-TYPE
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.16DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgVirtServerFreeServiceIdx
OBJECT-TYPE
The first free service index number of the virtual server. Value 0 will be returned when all 8 virtual services are configured for a virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.17INTEGER (0..8)read-onlycurrent
slbNewCfgVirtServerCReset
OBJECT-TYPE
Enable/disable client connection reset for invalid VPORT.
1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
slbVirtServicesTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB Virtual Services Table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.4Integer32read-onlycurrent
slbCurCfgVirtServicesTable
OBJECT-TYPE
The table of virtual services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5not-accessiblecurrent
slbCurCfgVirtServicesEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1not-accessiblecurrent
slbCurCfgVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.1Integer32read-onlycurrent
slbCurCfgVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.2Integer32read-onlycurrent
slbCurCfgVirtServiceVirtPort
OBJECT-TYPE
The layer4 virtual port number of the service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.3INTEGER (9..65534)read-onlycurrent
slbCurCfgVirtServiceRealGroup
OBJECT-TYPE
The real server group number for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.4Integer32read-onlycurrent
slbCurCfgVirtServiceRealPort
OBJECT-TYPE
The layer4 real port number of the service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.5INTEGER (0..65534)read-onlycurrent
slbCurCfgVirtServiceUDPBalance
OBJECT-TYPE
Enable, disable or stateless the UDP balancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.6INTEGER {enabled(2), disabled(3), stateless(4)}read-onlycurrent
slbCurCfgVirtServiceHname
OBJECT-TYPE
The host name of the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.7DisplayString (SIZE(0..34))read-onlycurrent
slbCurCfgVirtServiceBwmContract
OBJECT-TYPE
The BWM contract number for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.8Integer32read-onlycurrent
slbCurCfgVirtServiceDirServerRtn
OBJECT-TYPE
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceRtspUrlParse
OBJECT-TYPE
Select RTSP URL load balancing type.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.10INTEGER {none(1), l4hash(2), hash(3), patternMatch(4)}read-onlycurrent
slbCurCfgVirtServiceDBind
OBJECT-TYPE
Enable/disable/forceproxy delayed binding.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.11INTEGER {enabled(1), disabled(2), forceproxy(3)}read-onlycurrent
slbCurCfgVirtServiceFtpParsing
OBJECT-TYPE
Enable or Disable the ftp parsing for the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceRemapUDPFrags
OBJECT-TYPE
Enable or disable remapping UDP server fragments
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.13INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceDnsSlb
OBJECT-TYPE
Enable or disable DNS query load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceResponseCount
OBJECT-TYPE
The number of cookie search response count.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.15INTEGER (1..16)read-onlycurrent
slbCurCfgVirtServicePBind
OBJECT-TYPE
Enable or disable persistent bindings for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.16INTEGER {clientip(2), disabled(3), sslid(4), cookie(5)}read-onlycurrent
slbCurCfgVirtServiceCname
OBJECT-TYPE
The cookie name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.17DisplayString (SIZE(0..20))read-onlycurrent
slbCurCfgVirtServiceCoffset
OBJECT-TYPE
The starting byte offset of the cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.18INTEGER (1..64)read-onlycurrent
slbCurCfgVirtServiceClength
OBJECT-TYPE
The number of bytes to extract from the cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.19INTEGER (1..64)read-onlycurrent
slbCurCfgVirtServiceUriCookie
OBJECT-TYPE
Enable or disable cookie search in URI
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.20INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceCExpire
OBJECT-TYPE
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format <MM/dd/yy[@hh:mm]> absolute mode or <days[:hours[:minutes]]> for relative mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.21DisplayString (SIZE(0..20))read-onlycurrent
slbCurCfgVirtServiceCookieMode
OBJECT-TYPE
Select cookie persistence mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.22INTEGER {rewrite(1), passive(2), insert(3), disabled(4)}read-onlycurrent
slbCurCfgVirtServiceHttpSlb
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.23INTEGER {disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)}read-onlycurrent
slbCurCfgVirtServiceHttpSlbOption
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.24INTEGER {and(1), or(2), none(3)}read-onlycurrent
slbCurCfgVirtServiceHttpSlb2
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.25INTEGER {disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)}read-onlycurrent
slbCurCfgVirtServiceHttpHdrName
OBJECT-TYPE
The HTTP header name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.26DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceUrlHashLen
OBJECT-TYPE
The number of bytes used to hash onto server, A zero means URL hashing disabled.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.27INTEGER (0..255)read-onlycurrent
slbCurCfgVirtServiceDirect
OBJECT-TYPE
Enable or disable DAM for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.28INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceThash
OBJECT-TYPE
Set hash parameter.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.29INTEGER {sip(1), sip-sport(2)}read-onlycurrent
slbCurCfgVirtServiceLdapreset
OBJECT-TYPE
Enable or disable LDAP Server Reset
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.30INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceLdapslb
OBJECT-TYPE
Enable or disable LDAP Server load balancing
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.31INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceSip
OBJECT-TYPE
Enable/disable SIP load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.32INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceXForwardedFor
OBJECT-TYPE
Enable/disable X-Forwarded-For for proxy mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.33INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceHttpRedir
OBJECT-TYPE
Enable/disable HTTP/HTTPS redirect for GSLB.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.34INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServicePbindRport
OBJECT-TYPE
Enable or disable use of rport in the session lookup for a persistent session.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.35INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceEgressPip
OBJECT-TYPE
Enable/disable pip selection based on egress port/vlan.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.36INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceCookieDname
OBJECT-TYPE
Select dname for insert cookie persistence mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.37INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceWts
OBJECT-TYPE
Enable or disable WTS loadbalancing and persistence.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.38INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceUhash
OBJECT-TYPE
Enable when there is no Session Directory server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.39INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceTimeOut
OBJECT-TYPE
The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.40INTEGER (0..32768)read-onlycurrent
slbCurCfgVirtServiceSdpNat
OBJECT-TYPE
Enable/disable SIP Media portal NAT.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.41INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceSessionMirror
OBJECT-TYPE
Enable/disable session mirroring.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.42INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceSoftGrid
OBJECT-TYPE
Enable/disable softgrid load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.43INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceConnPooling
OBJECT-TYPE
Enable/disable connection pooling for HTTP traffic.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.44INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtPersistentTimeOut
OBJECT-TYPE
The maximum number of minutes a persistent session should exist.
1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.45INTEGER (0..32768)read-onlycurrent
slbNewCfgVirtServicesTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6not-accessiblecurrent
slbNewCfgVirtServicesEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1not-accessiblecurrent
slbNewCfgVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.1Integer32read-onlycurrent
slbNewCfgVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.2Integer32 (1..8)read-onlycurrent
slbNewCfgVirtServiceVirtPort
OBJECT-TYPE
The layer4 virtual port number of the service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.3INTEGER (9..65534)read-createcurrent
slbNewCfgVirtServiceRealGroup
OBJECT-TYPE
The real server group number for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.4Integer32read-createcurrent
slbNewCfgVirtServiceRealPort
OBJECT-TYPE
The layer4 real port number of the service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.5INTEGER (0..65534)read-createcurrent
slbNewCfgVirtServiceUDPBalance
OBJECT-TYPE
Enable, disable or stateless the UDP balancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.6INTEGER {enabled(2), disabled(3), stateless(4)}read-createcurrent
slbNewCfgVirtServiceHname
OBJECT-TYPE
The host name of the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.7DisplayString (SIZE(0..34))read-createcurrent
slbNewCfgVirtServiceBwmContract
OBJECT-TYPE
The BWM contract number for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.8Integer32read-createcurrent
slbNewCfgVirtServiceDirServerRtn
OBJECT-TYPE
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceRtspUrlParse
OBJECT-TYPE
Select RTSP URL load balancing type.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.10INTEGER {none(1), l4hash(2), hash(3), patternMatch(4)}read-createcurrent
slbNewCfgVirtServiceDBind
OBJECT-TYPE
Enable/disable/forceproxy delayed binding.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.11INTEGER {enabled(1), disabled(2), forceproxy(3)}read-createcurrent
slbNewCfgVirtServiceFtpParsing
OBJECT-TYPE
Enable or Disable the ftp parsing for the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceRemapUDPFrags
OBJECT-TYPE
Enable or disable remapping UDP server fragments
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.13INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceDnsSlb
OBJECT-TYPE
Enable or disable DNS query load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceResponseCount
OBJECT-TYPE
The number of cookie search response count.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.15INTEGER (1..16)read-createcurrent
slbNewCfgVirtServicePBind
OBJECT-TYPE
Enable or disable persistent bindings for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.16INTEGER {clientip(2), disabled(3), sslid(4), cookie(5)}read-createcurrent
slbNewCfgVirtServiceCname
OBJECT-TYPE
The cookie name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.17DisplayString (SIZE(0..20))read-createcurrent
slbNewCfgVirtServiceCoffset
OBJECT-TYPE
The starting byte offset of the cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.18INTEGER (1..64)read-createcurrent
slbNewCfgVirtServiceClength
OBJECT-TYPE
The number of bytes to extract from the cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.19INTEGER (1..64)read-createcurrent
slbNewCfgVirtServiceUriCookie
OBJECT-TYPE
Enable or disable cookie search in URI
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceCExpire
OBJECT-TYPE
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format <MM/dd/yy[@hh:mm]> absolute mode or <days[:hours[:minutes]]> for relative mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.21DisplayString (SIZE(0..20))read-createcurrent
slbNewCfgVirtServiceCookieMode
OBJECT-TYPE
Select cookie persistence mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.22INTEGER {rewrite(1), passive(2), insert(3)}read-createcurrent
slbNewCfgVirtServiceHttpSlb
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.23INTEGER {disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)}read-createcurrent
slbNewCfgVirtServiceHttpSlbOption
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.24INTEGER {and(1), or(2), none(3)}read-createcurrent
slbNewCfgVirtServiceHttpSlb2
OBJECT-TYPE
Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.25INTEGER {disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)}read-createcurrent
slbNewCfgVirtServiceHttpHdrName
OBJECT-TYPE
The HTTP header name of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.26DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceUrlHashLen
OBJECT-TYPE
The number of bytes used to hash onto server, A zero means URL hashing disabled.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.27INTEGER (0..255)read-createcurrent
slbNewCfgVirtServiceDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.28INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgVirtServiceDirect
OBJECT-TYPE
Enable or disable DAM for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.29INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceThash
OBJECT-TYPE
Set hash parameter.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.30INTEGER {sip(1), sip-sport(2)}read-createcurrent
slbNewCfgVirtServiceLdapreset
OBJECT-TYPE
Enable or disable LDAP Server Reset
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.31INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceLdapslb
OBJECT-TYPE
Enable or disable LDAP Server load balancing
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.32INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceSip
OBJECT-TYPE
Enable/disable SIP load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.33INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceXForwardedFor
OBJECT-TYPE
Enable/disable X-Forwarded-For for proxy mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.34INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceHttpRedir
OBJECT-TYPE
Enable/disable HTTP/HTTPS redirect for GSLB.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.35INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServicePbindRport
OBJECT-TYPE
Enable or disable use of rport in the session lookup for a persistent session.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.36INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceEgressPip
OBJECT-TYPE
Enable/disable pip selection based on egress port/vlan.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.37INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceCookieDname
OBJECT-TYPE
Select dname for insert cookie persistence mode.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.38INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceWts
OBJECT-TYPE
Enable or disable WTS loadbalancing and persistence.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.39INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceUhash
OBJECT-TYPE
Enable when there is no Session Directory server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceTimeOut
OBJECT-TYPE
The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.41INTEGER (0..32768)read-createcurrent
slbNewCfgVirtServiceSdpNat
OBJECT-TYPE
Enable/disable SIP Media portal NAT.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.42INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceSessionMirror
OBJECT-TYPE
Enable/disable session mirroring.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.43INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceSoftGrid
OBJECT-TYPE
Enable/disable softgrid load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.44INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceConnPooling
OBJECT-TYPE
Enable/disable connection pooling for HTTP traffic.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.45INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtPersistentTimeOut
OBJECT-TYPE
The maximum number of minutes a persistent session should exist.
1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.46INTEGER (0..32768)read-createcurrent
slbUrlBwmTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB URL BWM Table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.7Integer32read-onlycurrent
slbCurCfgUrlBwmTable
OBJECT-TYPE
The table of URL based BWM for Virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.8not-accessiblecurrent
slbCurCfgUrlBwmEntry
OBJECT-TYPE
A row in the URL based BWM virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1not-accessiblecurrent
slbCurCfgUrlBwmVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.1Integer32read-onlycurrent
slbCurCfgUrlBwmVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.2Integer32read-onlycurrent
slbCurCfgUrlBwmUrlId
OBJECT-TYPE
The URL Path Identifier.
1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.3Integer32read-onlycurrent
slbCurCfgUrlBwmContract
OBJECT-TYPE
The BW contract number.
1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.4Integer32read-onlycurrent
slbNewCfgUrlBwmTable
OBJECT-TYPE
The table of URL based BWM for Virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9not-accessiblecurrent
slbNewCfgUrlBwmEntry
OBJECT-TYPE
A row in the URL based BWM virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1not-accessiblecurrent
slbNewCfgUrlBwmVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.1Integer32read-onlycurrent
slbNewCfgUrlBwmVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.2Integer32read-onlycurrent
slbNewCfgUrlBwmUrlId
OBJECT-TYPE
The URL Path Identifier.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.3Integer32read-onlycurrent
slbNewCfgUrlBwmContract
OBJECT-TYPE
The BW contract number.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.4Integer32read-createcurrent
slbNewCfgUrlBwmDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.5INTEGER {other(1), delete(2)}read-createcurrent
slbCurCfgContRuleTable
OBJECT-TYPE
The table of Content based Services Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10not-accessiblecurrent
slbCurCfgContRuleEntry
OBJECT-TYPE
A row in the Content Based Services Rules table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1not-accessiblecurrent
slbCurCfgContVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.1Integer32read-onlycurrent
slbCurCfgContVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.2Integer32read-onlycurrent
slbCurCfgContRuleIndex
OBJECT-TYPE
The content based service rule index.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.3Integer32read-onlycurrent
slbCurCfgContRuleName
OBJECT-TYPE
The Content Rule Name.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.4DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgContRuleContClass
OBJECT-TYPE
The Content Class for the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.5DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgContRuleAction
OBJECT-TYPE
Action type of the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.6INTEGER {group(1), appredir(2), discard(3), goto(4)}read-onlycurrent
slbCurCfgContRuleRealGrpNum
OBJECT-TYPE
The group number of real server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.7INTEGER (1..1024)read-onlycurrent
slbCurCfgContRuleGotoRuleNum
OBJECT-TYPE
The group number of real server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.8INTEGER (1..12800)read-onlycurrent
slbCurCfgContRuleRedirection
OBJECT-TYPE
Application redirection for the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.9DisplayString (SIZE(0..255))read-onlycurrent
slbCurCfgContRuleState
OBJECT-TYPE
Enable or disable Content Based Services Rule .
1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgContRuleTable
OBJECT-TYPE
The table of Content based Services Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11not-accessiblecurrent
slbNewCfgContRuleEntry
OBJECT-TYPE
A row in the Content Based Services Rules table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1not-accessiblecurrent
slbNewCfgContVirtServIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.1Integer32read-onlycurrent
slbNewCfgContVirtServiceIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.2Integer32read-onlycurrent
slbNewCfgContRuleIndex
OBJECT-TYPE
The content based service index.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.3Integer32read-onlycurrent
slbNewCfgContRuleName
OBJECT-TYPE
The Content Rule Name.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.4DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgContRuleContClass
OBJECT-TYPE
The Content Class for the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.5DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgContRuleAction
OBJECT-TYPE
Action type of the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.6INTEGER {group(1), appredir(2), discard(3), goto(4)}read-createcurrent
slbNewCfgContRuleRealGrpNum
OBJECT-TYPE
The group number of real server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.7INTEGER (1..1024)read-createcurrent
slbNewCfgContRuleGotoRuleNum
OBJECT-TYPE
The group number of real server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.8INTEGER (1..12800)read-createcurrent
slbNewCfgContRuleRedirection
OBJECT-TYPE
Application redirection for the rule.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.9DisplayString (SIZE(0..255))read-createcurrent
slbNewCfgContRuleCopy
OBJECT-TYPE
The Number to which current rule is to be copied.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.10INTEGER (1..12800)read-createcurrent
slbNewCfgContRuleState
OBJECT-TYPE
Enable or disable Content Based Services Rule .
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.11INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgContRuleDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.12INTEGER {other(1), delete(2)}read-createcurrent
slbCurCfgVirtServicesSecondPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12not-accessiblecurrent
slbCurCfgVirtServicesSecondPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1not-accessiblecurrent
slbCurCfgVirtServSecondPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.1Integer32read-onlycurrent
slbCurCfgVirtServiceSecondPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.2Integer32read-onlycurrent
slbCurCfgVirtServiceConnmgtStatus
OBJECT-TYPE
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.3INTEGER {disabled(0), pooling(1), muxenabled(2)}read-onlycurrent
slbCurCfgVirtServiceConnmgtTimeout
OBJECT-TYPE
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.4INTEGER (0..32768)read-onlycurrent
slbCurCfgVirtServiceCachepol
OBJECT-TYPE
Cache policy name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.5DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceComppol
OBJECT-TYPE
Compression policy name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.6DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceSSLpol
OBJECT-TYPE
SSL policy name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.7DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceServCert
OBJECT-TYPE
Server Certificate name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.8DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceHttpmodList
OBJECT-TYPE
HTTP Content Modifications Rule-list associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.9DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceCloaksrv
OBJECT-TYPE
Enable/disable server cloaking.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServErrcodeStatus
OBJECT-TYPE
Enable/disable/clear error-code configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.11INTEGER {enabled(1), disabled(2), clear(3)}read-onlycurrent
slbCurCfgVirtServErrcodeMatch
OBJECT-TYPE
Match error-code(s), e.g 203,204 .
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.12DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServErrcodeHttpRedir
OBJECT-TYPE
Use http redirection [yes/no] [Default: yes].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.13INTEGER {yes(1), no(2)}read-onlycurrent
slbCurCfgVirtServErrcodeUrl
OBJECT-TYPE
URL for redirection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.14DisplayString (SIZE(0..240))read-onlycurrent
slbCurCfgVirtServErrcode
OBJECT-TYPE
Set error code [Default: 302].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.15DisplayString (SIZE(0..3))read-onlycurrent
slbCurCfgVirtServErrcodeNew
OBJECT-TYPE
Enter Cur error code [Default: 302].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.16DisplayString (SIZE(0..3))read-onlycurrent
slbCurCfgVirtServErrcodeReason
OBJECT-TYPE
Enter error reason.
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.17DisplayString (SIZE(0..128))read-onlycurrent
slbCurCfgVirtServUrlchangStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.18INTEGER {enable(1), disable(2), clear(3)}read-onlycurrent
slbCurCfgVirtServUrlchangHostType
OBJECT-TYPE
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any]
1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.19INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5)}read-onlycurrent
slbCurCfgVirtServicesThirdPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13not-accessiblecurrent
slbCurCfgVirtServicesThirdPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1not-accessiblecurrent
slbCurCfgVirtServThirdPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.1Integer32read-onlycurrent
slbCurCfgVirtServiceThirdPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.2Integer32read-onlycurrent
slbCurCfgVirtServUrlchangHostName
OBJECT-TYPE
Enter hostname to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.3DisplayString (SIZE(0..250))read-onlycurrent
slbCurCfgVirtServUrlchangPathType
OBJECT-TYPE
Enter path match type [sufx|prefx|eq|incl|any].
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.4INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5), none(6)}read-onlycurrent
slbCurCfgVirtServUrlchangPathMatch
OBJECT-TYPE
Enter path to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.5DisplayString (SIZE(0..250))read-onlycurrent
slbCurCfgVirtServUrlchangPageName
OBJECT-TYPE
Enter page name to match or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.6DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServUrlchangPageType
OBJECT-TYPE
Enter page type to match or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.7DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServUrlchangActnType
OBJECT-TYPE
Enter path action type.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.8INTEGER {insert(1), replace(2), remove(3), none(4)}read-onlycurrent
slbCurCfgVirtServUrlchangPathInsrt
OBJECT-TYPE
Enter path to insert.
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.9DisplayString (SIZE(0..250))read-onlycurrent
slbCurCfgVirtServUrlchangInsrtPostn
OBJECT-TYPE
Insert the specified path before or after the matched section?
1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.10INTEGER {before(1), after(2)}read-onlycurrent
slbCurCfgVirtServicesFourthPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14not-accessiblecurrent
slbCurCfgVirtServicesFourthPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1not-accessiblecurrent
slbCurCfgVirtServFourthPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.1Integer32read-onlycurrent
slbCurCfgVirtServiceFourthPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.2Integer32read-onlycurrent
slbCurCfgVirtServUrlchangNewPgName
OBJECT-TYPE
Enter Cur page name or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.3DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServUrlchangNewPgType
OBJECT-TYPE
Enter Cur page type or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.4DisplayString (SIZE(0..64))read-onlycurrent
slbCurCfgVirtServPathHideStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.5INTEGER {enable(1), disable(2), clear(3)}read-onlycurrent
slbCurCfgVirtServPathHideHostType
OBJECT-TYPE
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any].
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.6INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5)}read-onlycurrent
slbCurCfgVirtServPathHideHostName
OBJECT-TYPE
Enter hostname to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.7DisplayString (SIZE(0..250))read-onlycurrent
slbCurCfgVirtServPathHidePathType
OBJECT-TYPE
Enter path match type [sufx|prefx|eq|none].
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.8INTEGER {sufx(1), prefx(2), eq(3), none(4)}read-onlycurrent
slbCurCfgVirtServPathHidePathName
OBJECT-TYPE
Enter path to remove.
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.9DisplayString (SIZE(0..250))read-onlycurrent
slbCurCfgVirtServTextrepStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.10INTEGER {enable(1), disable(2), clear(3)}read-onlycurrent
slbCurCfgVirtServTextrepAction
OBJECT-TYPE
Enter action [replace|remove|none].
1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.11INTEGER {none(0), replace(1), remove(2)}read-onlycurrent
slbCurCfgVirtServicesFifthPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15not-accessiblecurrent
slbCurCfgVirtServicesFifthPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1not-accessiblecurrent
slbCurCfgVirtServFifthPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.1Integer32read-onlycurrent
slbCurCfgVirtServiceFifthPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.2Integer32read-onlycurrent
slbCurCfgVirtServTextrepMatchText
OBJECT-TYPE
Enter text to be replaced.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.3DisplayString (SIZE(0..128))read-onlycurrent
slbCurCfgVirtServTextrepReplacTxt
OBJECT-TYPE
Enter Cur text/ text to remove.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.4DisplayString (SIZE(0..128))read-onlycurrent
slbCurCfgVirtServApplicationType
OBJECT-TYPE
Application Type for virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.5INTEGER {basic-slb(1), dns(2), ftp(3), ftp-data(4), ldap(5), http(6), https(7), ssl(8), rtsp(9), sip(10), wts(11), tftp(12)}read-onlycurrent
slbCurCfgVirtServiceName
OBJECT-TYPE
The name of the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.6DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceAction
OBJECT-TYPE
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.7INTEGER {group(1), redirect(2), discard(3)}read-onlycurrent
slbCurCfgVirtServiceRedirect
OBJECT-TYPE
application redirection location.We need to provide this value When action type is set to redirect(2).
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.8DisplayString (SIZE(0..255))read-onlycurrent
slbCurCfgVirtServiceServCertGrpMark
OBJECT-TYPE
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.9INTEGER {cert(1), group(2)}read-onlycurrent
slbCurCfgVirtServiceDnsType
OBJECT-TYPE
Set DNS type for this service (DNS, DNSSEC).
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.10INTEGER {dns(1), dnssec(2), both(3)}read-onlycurrent
slbCurCfgVirtServiceClntproxType
OBJECT-TYPE
Set client proximity type for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.11INTEGER {none(1), http(2), https(3)}read-onlycurrent
slbCurCfgVirtServiceZerowinSize
OBJECT-TYPE
Enable or disable zero window size in SYN+ACK for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceCookiePath
OBJECT-TYPE
The cookie path name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.13DisplayString (SIZE(0..32))read-onlycurrent
slbCurCfgVirtServiceCookieSecure
OBJECT-TYPE
Is cookie secure [yes/no] [Default: no].
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.14INTEGER {no(1), yes(2)}read-onlycurrent
slbCurCfgVirtServiceNoRtsp
OBJECT-TYPE
Enable or disable only rtsp SLB for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceCkRebind
OBJECT-TYPE
Server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.16INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceParseLimit
OBJECT-TYPE
Enable or disable buffer limit for content based selection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgVirtServiceParseLength
OBJECT-TYPE
The buffer length for content based selection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.18INTEGER (0..18200)read-onlycurrent
slbCurCfgVirtServiceUriNorm
OBJECT-TYPE
Enable or disable URI normalization for HTTP content matching.
1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.19INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgVirtServicesSecondPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16not-accessiblecurrent
slbNewCfgVirtServicesSecondPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1not-accessiblecurrent
slbNewCfgVirtServSecondPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.1Integer32read-onlycurrent
slbNewCfgVirtServiceSecondPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.2Integer32read-onlycurrent
slbNewCfgVirtServiceConnmgtStatus
OBJECT-TYPE
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.3INTEGER {disabled(0), pooling(1), muxenabled(2)}read-createcurrent
slbNewCfgVirtServiceConnmgtTimeout
OBJECT-TYPE
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.4INTEGER (0..32768)read-createcurrent
slbNewCfgVirtServiceCachepol
OBJECT-TYPE
Cache policy name associated with this virtual service.Set none to delete entry
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.5DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceComppol
OBJECT-TYPE
Compression policy name associated with this virtual service.Set none to delete entry
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.6DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceSSLpol
OBJECT-TYPE
SSL policy name associated with this virtual service.Set none to delete entry
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.7DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceServCert
OBJECT-TYPE
Server Certificate name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.8DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceHttpmodList
OBJECT-TYPE
HTTP Content Modifications Rule-list associated with this virtual service.Set none to delete entry
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.9DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceCloaksrv
OBJECT-TYPE
Enable/disable server cloaking.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServErrcodeStatus
OBJECT-TYPE
Enable/disable/clear error-code configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.11INTEGER {enabled(1), disabled(2), clear(3)}read-createcurrent
slbNewCfgVirtServErrcodeMatch
OBJECT-TYPE
Match error-code(s), e.g 203,204 .
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.12DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServErrcodeHttpRedir
OBJECT-TYPE
Use http redirection [yes/no] [Default: yes].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.13INTEGER {yes(1), no(2)}read-createcurrent
slbNewCfgVirtServErrcodeUrl
OBJECT-TYPE
URL for redirection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.14DisplayString (SIZE(0..240))read-createcurrent
slbNewCfgVirtServErrcode
OBJECT-TYPE
set error code [Default: 302].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.15DisplayString (SIZE(0..3))read-createcurrent
slbNewCfgVirtServErrcodeNew
OBJECT-TYPE
Enter new error code [Default: 302].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.16DisplayString (SIZE(0..3))read-createcurrent
slbNewCfgVirtServErrcodeReason
OBJECT-TYPE
Enter error reason.
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.17DisplayString (SIZE(0..128))read-createcurrent
slbNewCfgVirtServUrlchangStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.18INTEGER {enable(1), disable(2), clear(3)}read-createcurrent
slbNewCfgVirtServUrlchangHostType
OBJECT-TYPE
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any]
1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.19INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5)}read-createcurrent
slbNewCfgVirtServicesThirdPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17not-accessiblecurrent
slbNewCfgVirtServicesThirdPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1not-accessiblecurrent
slbNewCfgVirtServThirdPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.1Integer32read-onlycurrent
slbNewCfgVirtServiceThirdPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.2Integer32read-onlycurrent
slbNewCfgVirtServUrlchangHostName
OBJECT-TYPE
Enter hostname to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.3DisplayString (SIZE(0..250))read-createcurrent
slbNewCfgVirtServUrlchangPathType
OBJECT-TYPE
Enter path match type [sufx|prefx|eq|incl|any|none].
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.4INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5), none(6)}read-createcurrent
slbNewCfgVirtServUrlchangPathMatch
OBJECT-TYPE
Enter path to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.5DisplayString (SIZE(0..250))read-createcurrent
slbNewCfgVirtServUrlchangPageName
OBJECT-TYPE
Enter page name to match or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.6DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServUrlchangPageType
OBJECT-TYPE
Enter page type to match or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.7DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServUrlchangActnType
OBJECT-TYPE
Enter path action type.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.8INTEGER {insert(1), replace(2), remove(3), none(4)}read-createcurrent
slbNewCfgVirtServUrlchangPathInsrt
OBJECT-TYPE
Enter path to insert.
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.9DisplayString (SIZE(0..250))read-createcurrent
slbNewCfgVirtServUrlchangInsrtPostn
OBJECT-TYPE
Insert the specified path before or after the matched section?
1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.10INTEGER {before(1), after(2)}read-createcurrent
slbNewCfgVirtServicesFourthPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18not-accessiblecurrent
slbNewCfgVirtServicesFourthPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1not-accessiblecurrent
slbNewCfgVirtServFourthPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.1Integer32read-onlycurrent
slbNewCfgVirtServiceFourthPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.2Integer32read-onlycurrent
slbNewCfgVirtServUrlchangNewPgName
OBJECT-TYPE
Enter new page name or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.3DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServUrlchangNewPgType
OBJECT-TYPE
Enter new page type or none.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.4DisplayString (SIZE(0..64))read-createcurrent
slbNewCfgVirtServPathHideStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.5INTEGER {enable(1), disable(2), clear(3)}read-createcurrent
slbNewCfgVirtServPathHideHostType
OBJECT-TYPE
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any].
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.6INTEGER {sufx(1), prefx(2), eq(3), incl(4), any(5)}read-createcurrent
slbNewCfgVirtServPathHideHostName
OBJECT-TYPE
Enter hostname to match.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.7DisplayString (SIZE(0..250))read-createcurrent
slbNewCfgVirtServPathHidePathType
OBJECT-TYPE
Enter path match type [sufx|prefx|eq|none].
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.8INTEGER {sufx(1), prefx(2), eq(3), none(4)}read-createcurrent
slbNewCfgVirtServPathHidePathName
OBJECT-TYPE
Enter path to remove.
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.9DisplayString (SIZE(0..250))read-createcurrent
slbNewCfgVirtServTextrepStatus
OBJECT-TYPE
Enter enabled/disabled/clear [Default: clear].
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.10INTEGER {enable(1), disable(2), clear(3)}read-createcurrent
slbNewCfgVirtServTextrepAction
OBJECT-TYPE
Enter action [replace|remove|none].
1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.11INTEGER {none(0), replace(1), remove(2)}read-createcurrent
slbNewCfgVirtServicesFifthPartTable
OBJECT-TYPE
The table of virtual Services.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19not-accessiblecurrent
slbNewCfgVirtServicesFifthPartEntry
OBJECT-TYPE
A row in the virtual services table.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1not-accessiblecurrent
slbNewCfgVirtServFifthPartIndex
OBJECT-TYPE
The number of the virtual server.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.1Integer32read-onlycurrent
slbNewCfgVirtServiceFifthPartIndex
OBJECT-TYPE
The service index. This has no external meaning
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.2Integer32read-onlycurrent
slbNewCfgVirtServTextrepMatchText
OBJECT-TYPE
Enter text to be replaced.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.3DisplayString (SIZE(0..128))read-createcurrent
slbNewCfgVirtServTextrepReplacTxt
OBJECT-TYPE
Enter new text/ text to remove.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.4DisplayString (SIZE(0..128))read-createcurrent
slbNewCfgVirtServApplicationType
OBJECT-TYPE
Application Type for virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.5INTEGER {basic-slb(1), dns(2), ftp(3), ftp-data(4), ldap(5), http(6), https(7), ssl(8), rtsp(9), sip(10), wts(11), tftp(12)}read-createcurrent
slbNewCfgVirtServiceName
OBJECT-TYPE
The name of the virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.6DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceAction
OBJECT-TYPE
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.7INTEGER {group(1), redirect(2), discard(3)}read-createcurrent
slbNewCfgVirtServiceRedirect
OBJECT-TYPE
application redirection location.We need to provide this value When action type is set to redirect(2).
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.8DisplayString (SIZE(0..255))read-createcurrent
slbNewCfgVirtServiceServCertGrpMark
OBJECT-TYPE
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.9INTEGER {cert(1), group(2)}read-createcurrent
slbNewCfgVirtServiceDnsType
OBJECT-TYPE
Set DNS type for this service (DNS, DNSSEC).
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.10INTEGER {dns(1), dnssec(2), both(3)}read-createcurrent
slbNewCfgVirtServiceClntproxType
OBJECT-TYPE
Set client proximity type for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.11INTEGER {none(1), http(2), https(3)}read-createcurrent
slbNewCfgVirtServiceZerowinSize
OBJECT-TYPE
Enable or disable zero window size in SYN+ACK for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceCookiePath
OBJECT-TYPE
The cookie path name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.13DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgVirtServiceCookieSecure
OBJECT-TYPE
Is cookie secure [yes/no] [Default: no].
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.14INTEGER {no(1), yes(2)}read-createcurrent
slbNewCfgVirtServiceNoRtsp
OBJECT-TYPE
Enable or disable only rtsp SLB for this service.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.15INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceCkRebind
OBJECT-TYPE
Enable or disable server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceParseLimit
OBJECT-TYPE
Enable or disable buffer limit for content based selection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.17INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgVirtServiceParseLength
OBJECT-TYPE
The buffer length for content based selection.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.18INTEGER (0..18200)read-createcurrent
slbNewCfgVirtServiceUriNorm
OBJECT-TYPE
Enable or disable URI normalization for HTTP content matching.
1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
portCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.5
slbPortTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB Port Table.
1.3.6.1.4.1.1872.2.5.4.1.1.5.1Integer32read-onlycurrent
slbCurCfgPortTable
OBJECT-TYPE
The table of ports and their SLB states
1.3.6.1.4.1.1872.2.5.4.1.1.5.2not-accessiblecurrent
slbCurCfgPortEntry
OBJECT-TYPE
A row in the slbPortTable
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1not-accessiblecurrent
slbCurCfgPortIndex
OBJECT-TYPE
The port number for which the SLB information pertains.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.1Integer32read-onlycurrent
slbCurCfgPortSlbState
OBJECT-TYPE
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.2INTEGER {none(1), client(2), server(3), client-server(4)}read-onlycurrent
slbCurCfgPortSlbHotStandby
OBJECT-TYPE
Enable or disable hot standby processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbInterSwitch
OBJECT-TYPE
Enable or disable inter-switch processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbPipState
OBJECT-TYPE
Enable or disable use of proxy IP address on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbRtsState
OBJECT-TYPE
Enable or disable RTS processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbIdslbState
OBJECT-TYPE
Enable or disable Intrusion Detection server load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbFilter
OBJECT-TYPE
Enable or disable Filtering.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbServState
OBJECT-TYPE
Enable or disable server processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbClntState
OBJECT-TYPE
Enable or disable client processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbL3Filter
OBJECT-TYPE
Enable or disable Layer3 Filtering.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgPortSlbFilterBmap
OBJECT-TYPE
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.13OCTET STRING (SIZE(0..256))read-onlycurrent
slbCurCfgPortInterSwitchVlan
OBJECT-TYPE
VLAN for inter-switch processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.14INTEGER (1..4090)read-onlycurrent
slbCurCfgPortVlanBmap
OBJECT-TYPE
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.15OCTET STRINGread-onlycurrent
slbNewCfgPortTable
OBJECT-TYPE
The table of ports and their SLB states
1.3.6.1.4.1.1872.2.5.4.1.1.5.3not-accessiblecurrent
slbNewCfgPortEntry
OBJECT-TYPE
A row in the slbPortTable
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1not-accessiblecurrent
slbNewCfgPortIndex
OBJECT-TYPE
The port number for which the SLB information pertains.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.1Integer32read-onlycurrent
slbNewCfgPortSlbState
OBJECT-TYPE
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.2INTEGER {none(1), client(2), server(3), client-server(4)}read-writecurrent
slbNewCfgPortSlbHotStandby
OBJECT-TYPE
Enable or disable hot standby processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbInterSwitch
OBJECT-TYPE
Enable or disable inter-switch processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbPipState
OBJECT-TYPE
Enable or disable use of proxy IP address on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.5INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbRtsState
OBJECT-TYPE
Enable or disable RTS processing on the switch port.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.7INTEGER {other(1), delete(2)}read-writecurrent
slbNewCfgPortSlbIdslbState
OBJECT-TYPE
Enable or disable Intrusion Detection server load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbFilter
OBJECT-TYPE
Enable or disable Filtering.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.10INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbAddFilter
OBJECT-TYPE
Specify the Filter Number to be added to this Port table.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.11INTEGER (1..2048)read-writecurrent
slbNewCfgPortSlbRemFilter
OBJECT-TYPE
Specify the Filter Number to be deleted from this Port table.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.12INTEGER (1..2048)read-writecurrent
slbNewCfgPortSlbServState
OBJECT-TYPE
Enable or disable Server Processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.13INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbClntState
OBJECT-TYPE
Enable or disable Client Processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbL3Filter
OBJECT-TYPE
Enable or disable Layer3 Filtering.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.15INTEGER {enabled(1), disabled(2)}read-writecurrent
slbNewCfgPortSlbFilterBmap
OBJECT-TYPE
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.16OCTET STRING (SIZE(0..256))read-onlycurrent
slbNewCfgPortInterSwitchVlan
OBJECT-TYPE
VLAN for inter-switch processing.
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.17INTEGER (1..4090)read-writecurrent
slbNewCfgPortVlanBmap
OBJECT-TYPE
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.18OCTET STRINGread-onlycurrent
syncCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.6
syncGeneralCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.6.1
slbCurCfgSyncFilt
OBJECT-TYPE
Enable or disable synch filter configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncFilt
OBJECT-TYPE
Enable or disable synch filter configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncPort
OBJECT-TYPE
Enable or disable synch port configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncPort
OBJECT-TYPE
Enable or disable synch port configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncVrrp
OBJECT-TYPE
Enable or disable synch VRRP Priorities.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncVrrp
OBJECT-TYPE
Enable or disable synch VRRP Priorities.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncPip
OBJECT-TYPE
Enable or disable synch proxy IP addresses.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncPip
OBJECT-TYPE
Enable or disable synch proxy IP addresses.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncSfo
OBJECT-TYPE
Enable or disable synch stateful failover.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncSfo
OBJECT-TYPE
Enable or disable synch stateful failover.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.10INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncSfoUpdatePeriod
OBJECT-TYPE
The stateful failover update period in seconds.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.11INTEGER (1..60)read-onlycurrent
slbNewCfgSyncSfoUpdatePeriod
OBJECT-TYPE
The stateful failover update period in seconds.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.12INTEGER (1..60)read-writecurrent
slbCurCfgSyncBwm
OBJECT-TYPE
Enable or disable syncing BWM configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.13INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncBwm
OBJECT-TYPE
Enable or disable syncing BWM configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncPeerPip
OBJECT-TYPE
Enable or disable synch peer proxy IP addresses.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncPeerPip
OBJECT-TYPE
Enable or disable synch peer proxy IP addresses.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.16INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncCerts
OBJECT-TYPE
Enable or disable syncing certificate repository components.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncCerts
OBJECT-TYPE
Enable or disable syncing certificate repository components. If Enable option is selected then Passphrase to encrypt/decrypt certificates and private keys during configuration sync must be set in all peer switches.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgSyncCertsPassPhrase
OBJECT-TYPE
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.19DisplayString (SIZE(0..32))read-onlycurrent
slbNewCfgSyncCertsPassPhrase
OBJECT-TYPE
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.Same PassPhrase should be set at all peer switches.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.20DisplayString (SIZE(0..32))read-writecurrent
slbNewCfgSyncCertsConfPassPhrase
OBJECT-TYPE
This character string is used to confirm Passphrase which is already entered in slbNewCfgSyncCertsPassPhrase.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.21DisplayString (SIZE(0..32))read-writecurrent
slbCurCfgSyncRoute
OBJECT-TYPE
Enable or disable synch static route configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.22INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgSyncRoute
OBJECT-TYPE
Enable or disable synch static route configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.1.23INTEGER {enabled(1), disabled(2)}read-writecurrent
slbPeerTableMaxSize
OBJECT-TYPE
The maximum number of entries in SLB Peer Table.
1.3.6.1.4.1.1872.2.5.4.1.1.6.2Integer32read-onlycurrent
slbCurCfgPeerTable
OBJECT-TYPE
The table of Synch Peer Switch configuration in the current_config.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3not-accessiblecurrent
slbCurCfgPeerEntry
OBJECT-TYPE
Information about Synch Peer Switch configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1not-accessiblecurrent
slbCurCfgPeerIndex
OBJECT-TYPE
The index for synch peer switchs.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.1Integer32read-onlycurrent
slbCurCfgPeerIpAddr
OBJECT-TYPE
The IP address of the peer switch.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.2IpAddressread-onlycurrent
slbCurCfgPeerState
OBJECT-TYPE
Enable or disable the peer switch.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.3INTEGER {enable(1), disable(2)}read-onlycurrent
slbCurCfgPeerIpv6Addr
OBJECT-TYPE
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.4DisplayString (SIZE(0..40))read-onlycurrent
slbCurCfgPeerIpVersion
OBJECT-TYPE
Peer Ip Address Version.
1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.5INTEGER {ipv4(4), ipv6(6)}read-onlycurrent
slbNewCfgPeerTable
OBJECT-TYPE
The table of Synch Peer Switch configuration in the new_config.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4not-accessiblecurrent
slbNewCfgPeerEntry
OBJECT-TYPE
Information about synch peer switch configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1not-accessiblecurrent
slbNewCfgPeerIndex
OBJECT-TYPE
The index number for synch peer switchs.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.1Integer32read-onlycurrent
slbNewCfgPeerIpAddr
OBJECT-TYPE
The IP address of the peer switch.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.2IpAddressread-createcurrent
slbNewCfgPeerState
OBJECT-TYPE
Enable or disable the peer switch.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.3INTEGER {enable(1), disable(2)}read-createcurrent
slbNewCfgPeerDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgPeerIpv6Addr
OBJECT-TYPE
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.5DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgPeerIpVersion
OBJECT-TYPE
Peer Ip Address Version.
1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.6INTEGER {ipv4(4), ipv6(6)}read-onlycurrent
wapCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.7
slbCurCfgWapTpcp
OBJECT-TYPE
Enable or disable WAP load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.7.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgWapTpcp
OBJECT-TYPE
Enable or disable WAP load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.7.2INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgWapDebug
OBJECT-TYPE
WAP Debug level.
1.3.6.1.4.1.1872.2.5.4.1.1.7.3INTEGER (0..10)read-onlycurrent
slbNewCfgWapDebug
OBJECT-TYPE
WAP Debug level.
1.3.6.1.4.1.1872.2.5.4.1.1.7.4INTEGER (0..10)read-writecurrent
waphcCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.8
slbCurCfgWaphcWSPPort
OBJECT-TYPE
The WSP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.1INTEGER (0..65534)read-onlycurrent
slbNewCfgWaphcWSPPort
OBJECT-TYPE
The WSP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.2INTEGER (0..65534)read-writecurrent
slbCurCfgWaphcOffset
OBJECT-TYPE
The offset in received WSP packet.
1.3.6.1.4.1.1872.2.5.4.1.1.8.3INTEGER (0..256)read-onlycurrent
slbNewCfgWaphcOffset
OBJECT-TYPE
The offset in received WSP packet.
1.3.6.1.4.1.1872.2.5.4.1.1.8.4INTEGER (0..256)read-writecurrent
slbCurCfgWaphcSndContent
OBJECT-TYPE
The content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.5OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcSndContent
OBJECT-TYPE
The content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.6OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcRcvContent
OBJECT-TYPE
The content to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.7OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcRcvContent
OBJECT-TYPE
The content to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.8OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcWTLSPort
OBJECT-TYPE
The WTLS port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.9INTEGER (0..65534)read-onlycurrent
slbNewCfgWaphcWTLSPort
OBJECT-TYPE
The WTLS port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.10INTEGER (0..65534)read-writecurrent
slbCurCfgWaphcWTPSndContent
OBJECT-TYPE
The WTP+WSP content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.11OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcWTPSndContent
OBJECT-TYPE
The WTP+WSP content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.12OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcWTPRcvContent
OBJECT-TYPE
The WTP+WSP content to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.13OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcWTPRcvContent
OBJECT-TYPE
The WTP+WSP content to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.14OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcWTPConnContent
OBJECT-TYPE
The WTP+WSP CONNECT content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.15OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcWTPConnContent
OBJECT-TYPE
The WTP+WSP CONNECT content to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.16OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcWTPPort
OBJECT-TYPE
The WTP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.17INTEGER (0..65534)read-onlycurrent
slbNewCfgWaphcWTPPort
OBJECT-TYPE
The WTP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.18INTEGER (0..65534)read-writecurrent
slbCurCfgWaphcWTLSWSPPort
OBJECT-TYPE
The WTLS+WSP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.19INTEGER (0..65534)read-onlycurrent
slbNewCfgWaphcWTLSWSPPort
OBJECT-TYPE
The WTLS+WSP port number to health check.
1.3.6.1.4.1.1872.2.5.4.1.1.8.20INTEGER (0..65534)read-writecurrent
slbCurCfgWaphcWTPOffset
OBJECT-TYPE
The offset in received WTP packet.
1.3.6.1.4.1.1872.2.5.4.1.1.8.21INTEGER (0..256)read-onlycurrent
slbNewCfgWaphcWTPOffset
OBJECT-TYPE
The offset in received WTP packet.
1.3.6.1.4.1.1872.2.5.4.1.1.8.22INTEGER (0..256)read-writecurrent
slbCurCfgWaphcCouple
OBJECT-TYPE
Enable or disable coupling of WAP and RADIUS Accounting health checks.
1.3.6.1.4.1.1872.2.5.4.1.1.8.23INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgWaphcCouple
OBJECT-TYPE
Enable or disable coupling of WAP and RADIUS Accounting health checks.
1.3.6.1.4.1.1872.2.5.4.1.1.8.24INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgWaphcConnPDU
OBJECT-TYPE
The CONNECT PDU to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.25OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcConnPDU
OBJECT-TYPE
The CONNECT PDU to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.26OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcSndPDU
OBJECT-TYPE
The GET PDU to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.27OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcSndPDU
OBJECT-TYPE
The GET PDU to be sent to the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.28OCTET STRING (SIZE(0..512))read-writecurrent
slbCurCfgWaphcRcvPDU
OBJECT-TYPE
The REPLY PDU to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.29OCTET STRING (SIZE(0..512))read-onlycurrent
slbNewCfgWaphcRcvPDU
OBJECT-TYPE
The REPLY PDU to be received from the WAP gateway.
1.3.6.1.4.1.1872.2.5.4.1.1.8.30OCTET STRING (SIZE(0..512))read-writecurrent
synAttackDetCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.9
synAttackCurCfgInterval
OBJECT-TYPE
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
1.3.6.1.4.1.1872.2.5.4.1.1.9.1INTEGER (2..3600)read-onlycurrent
synAttackNewCfgInterval
OBJECT-TYPE
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
1.3.6.1.4.1.1872.2.5.4.1.1.9.2INTEGER (2..3600)read-writecurrent
synAttackCurCfgThreshhold
OBJECT-TYPE
The threshhold indicating the number of new half-open sessions per second.
1.3.6.1.4.1.1872.2.5.4.1.1.9.3INTEGER (1..100000)read-onlycurrent
synAttackNewCfgThreshhold
OBJECT-TYPE
The threshhold indicating the number of new half-open sessions per second.
1.3.6.1.4.1.1872.2.5.4.1.1.9.4INTEGER (1..100000)read-writecurrent
synAttackCurCfgResponseInterval
OBJECT-TYPE
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.9.5INTEGER (10..1000)read-onlycurrent
synAttackNewCfgResponseInterval
OBJECT-TYPE
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
1.3.6.1.4.1.1872.2.5.4.1.1.9.6INTEGER (10..1000)read-writecurrent
synAttackCurCfgOnOff
OBJECT-TYPE
Globally ON or OFF of SYN Protection.
1.3.6.1.4.1.1872.2.5.4.1.1.9.7INTEGER {on(1), off(2)}read-onlycurrent
synAttackNewCfgOnOff
OBJECT-TYPE
Globally ON or OFF of SYN Protection.
1.3.6.1.4.1.1872.2.5.4.1.1.9.8INTEGER {on(1), off(2)}read-writecurrent
hcsCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.13
hcsTableMaxSize
OBJECT-TYPE
The maximum number of scriptable health check entries.
1.3.6.1.4.1.1872.2.5.4.1.1.13.1Integer32read-onlycurrent
hcsCurCfgTable
OBJECT-TYPE
The scriptable health check table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.13.2not-accessiblecurrent
hcsCurCfgTableEntry
OBJECT-TYPE
A row in the scriptable health check table.
1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1not-accessiblecurrent
hcsCurCfgScriptIndex
OBJECT-TYPE
The index in the scriptable health check table.
1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.1Integer32read-onlycurrent
hcsCurCfgScriptString
OBJECT-TYPE
The scriptable health check string.
1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.2OCTET STRINGread-onlycurrent
hcsNewCfgTable
OBJECT-TYPE
The scriptable health check table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3not-accessiblecurrent
hcsNewCfgTableEntry
OBJECT-TYPE
A row in the scriptable health check table.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1not-accessiblecurrent
hcsNewCfgScriptIndex
OBJECT-TYPE
The index the scriptable health check.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.1Integer32read-onlycurrent
hcsNewCfgScriptString
OBJECT-TYPE
The scriptable health check string.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.2OCTET STRINGread-onlycurrent
hcsNewCfgAddSendCmd
OBJECT-TYPE
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.4DisplayString (SIZE(0..255))read-createobsolete
hcsNewCfgAddExpectCmd
OBJECT-TYPE
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.5DisplayString (SIZE(0..255))read-createobsolete
hcsNewCfgAddCloseCmd
OBJECT-TYPE
Add close command to end of the script. When set to the value of 2 (add), 'close' will be appended to the script. Also, a 'null terminator'(\0) will be automatically appended. The null terminator and the 'close' characters will be counted as characters in the script. This command is only valid for TCP.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.6INTEGER {other(1), close(2)}read-createcurrent
hcsNewCfgRemLastCmd
OBJECT-TYPE
Remove the last command from the script. When set to the value of 2 (remove), last command will be removed from the script. When read, other(1) is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.7INTEGER {other(1), remove(2)}read-createcurrent
hcsNewCfgDeleteScript
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.8INTEGER {other(1), delete(2)}read-createcurrent
hcsNewCfgAddOffsetCmd
OBJECT-TYPE
Append an 'offset' command to the script. The set value of this object should be the offset from the beginning of the data area of the TCP/UDP packet to start matching the string configured in the last bexpect command. The 'offset ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'offset ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.9INTEGER (1..1464)read-createcurrent
hcsNewCfgAddWaitCmd
OBJECT-TYPE
Append a 'wait' command to the script. The set value of this object should be the maximum waiting time for the packet containing the content configured in the last expect command. Wait time is in units of milliseconds, and the maximum supported is 65535 ms. The 'wait ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'wait ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.10INTEGER (1..65535)read-createcurrent
hcsNewCfgAddOpenProtCmd
OBJECT-TYPE
Append an 'open' command to the script. The value of this object should be real server port number or name, followed by a comma, and then the protocol (either tcp or udp), e.g. '80,tcp'. Only the port number or name, and tcp or udp should be set. The 'open ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'open ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.11DisplayString (SIZE(0..31))read-createcurrent
hcsNewCfgAddNsendCmd
OBJECT-TYPE
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.12DisplayString (SIZE(0..255))read-createobsolete
hcsNewCfgAddNexpectCmd
OBJECT-TYPE
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.13DisplayString (SIZE(0..255))read-createobsolete
hcsNewCfgAddDepthCmd
OBJECT-TYPE
Append a 'depth' command to the script. The set value of this object should be the depth (search window) within the data area of the TCP/UDP packet for matching the string configured in the last bexpect command. The 'depth ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'depth ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.14INTEGER (1..1464)read-createcurrent
hcsNewCfgAddLongBsendCmd
OBJECT-TYPE
Append a 'bsend' command to the script. The set value of this object should be the exact binary data in hex format to be sent on the port opened with the 'open' command. The 'bsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'bsend ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.15OCTET STRING (SIZE(0..506))read-createcurrent
hcsNewCfgAddLongBexpectCmd
OBJECT-TYPE
Append a 'bexpect' command to the script. The set value of this object should be the exact binary data in hex format expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'bexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'bexpect ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.16OCTET STRING (SIZE(0..504))read-createcurrent
hcsNewCfgAddLongSendCmd
OBJECT-TYPE
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.17OCTET STRING (SIZE(0..507))read-createcurrent
hcsNewCfgAddLongExpectCmd
OBJECT-TYPE
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.18OCTET STRING (SIZE(0..505))read-createcurrent
hcsNewCfgAddLongNsendCmd
OBJECT-TYPE
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.19OCTET STRING (SIZE(0..506))read-createcurrent
hcsNewCfgAddLongNexpectCmd
OBJECT-TYPE
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.20OCTET STRING (SIZE(0..504))read-createcurrent
snmphcCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.14
snmphcTableMaxSize
OBJECT-TYPE
The maximum number of SNMP health check entries.
1.3.6.1.4.1.1872.2.5.4.1.1.14.1Integer32read-onlycurrent
snmphcCurCfgTable
OBJECT-TYPE
The SNMP health check table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2not-accessiblecurrent
snmphcCurCfgTableEntry
OBJECT-TYPE
A row in the SNMP health check table.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1not-accessiblecurrent
snmphcCurCfgIndex
OBJECT-TYPE
The index of the SNMP health check.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.1Integer32read-onlycurrent
snmphcCurCfgOid
OBJECT-TYPE
The OID to be sent in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.2DisplayString (SIZE(0..128))read-onlycurrent
snmphcCurCfgCommString
OBJECT-TYPE
The community string to be used in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.3DisplayString (SIZE(0..32))read-onlycurrent
snmphcCurCfgRcvContent
OBJECT-TYPE
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.4DisplayString (SIZE(0..64))read-onlycurrent
snmphcCurCfgInvert
OBJECT-TYPE
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
snmphcCurCfgUseWeight
OBJECT-TYPE
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response.
1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
snmphcNewCfgTable
OBJECT-TYPE
The SNMP health check table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3not-accessiblecurrent
snmphcNewCfgTableEntry
OBJECT-TYPE
A row in the SNMP health check table.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1not-accessiblecurrent
snmphcNewCfgIndex
OBJECT-TYPE
The index of the SNMP health check.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.1Integer32read-onlycurrent
snmphcNewCfgOid
OBJECT-TYPE
The OID to be sent in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.2DisplayString (SIZE(0..128))read-createcurrent
snmphcNewCfgCommString
OBJECT-TYPE
The community string to be used in the SNMP get request packet.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.3DisplayString (SIZE(0..32))read-createcurrent
snmphcNewCfgRcvContent
OBJECT-TYPE
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.4DisplayString (SIZE(0..64))read-createcurrent
snmphcNewCfgInvert
OBJECT-TYPE
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
snmphcNewCfgDeleteHc
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.6INTEGER {other(1), delete(2)}read-createcurrent
snmphcNewCfgUseWeight
OBJECT-TYPE
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response.
1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
pipTblCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.15
pipTableMaxSize
OBJECT-TYPE
The maximum number of PIP entries.
1.3.6.1.4.1.1872.2.5.4.1.1.15.1Integer32read-onlycurrent
pipCurCfgBaseType
OBJECT-TYPE
The PIP base. 1 = port based, 2 = VLAN based
1.3.6.1.4.1.1872.2.5.4.1.1.15.2INTEGER {port(1), vlan(2)}read-onlycurrent
pipCurCfgTable
OBJECT-TYPE
The PIP table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.15.3not-accessiblecurrent
pipCurCfgTableEntry
OBJECT-TYPE
A row in the PIP table.
1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1not-accessiblecurrent
pipCurCfgPip
OBJECT-TYPE
Proxy IP address by the instance of the pipCurCfgIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.1IpAddressread-onlycurrent
pipCurCfgPortMap
OBJECT-TYPE
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
pipCurCfgVlanMap
OBJECT-TYPE
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
pipNewCfgBaseType
OBJECT-TYPE
The PIP base. 1 = port based, 2 = VLAN based
1.3.6.1.4.1.1872.2.5.4.1.1.15.4INTEGER {port(1), vlan(2)}read-writecurrent
pipNewCfgTable
OBJECT-TYPE
The PIP table in the New configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5not-accessiblecurrent
pipNewCfgTableEntry
OBJECT-TYPE
A row in the PIP table.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1not-accessiblecurrent
pipNewCfgPip
OBJECT-TYPE
PIP address by the instance of the pipCurCfgIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.1IpAddressread-onlycurrent
pipNewCfgPortMap
OBJECT-TYPE
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
pipNewCfgVlanMap
OBJECT-TYPE
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
pipNewCfgDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.4INTEGER {other(1), delete(2)}read-createcurrent
pipNewCfgAddPortVlan
OBJECT-TYPE
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.5Integer32read-createcurrent
pipNewCfgRemovePortVlan
OBJECT-TYPE
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.6Integer32read-createcurrent
pipNewCfgAddPort
OBJECT-TYPE
The Port to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.7Integer32read-createcurrent
pipNewCfgAddVlan
OBJECT-TYPE
The VLAN to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.8Integer32read-createcurrent
pipNewCfgRemovePort
OBJECT-TYPE
The Port to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.9Integer32read-createcurrent
pipNewCfgRemoveVlan
OBJECT-TYPE
The VLAN to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.10Integer32read-createcurrent
pip6CurCfgTable
OBJECT-TYPE
The IPv6 PIP table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.15.6not-accessiblecurrent
pip6CurCfgTableEntry
OBJECT-TYPE
A row in the IPv6 PIP table.
1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1not-accessiblecurrent
pip6CurCfgPip
OBJECT-TYPE
IPv6 Proxy IP address by the instance of the pip6CurCfgIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.1DisplayString (SIZE(0..40))read-onlycurrent
pip6CurCfgPortMap
OBJECT-TYPE
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
pip6CurCfgVlanMap
OBJECT-TYPE
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
pip6NewCfgTable
OBJECT-TYPE
The IPv6 PIP table in the New configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7not-accessiblecurrent
pip6NewCfgTableEntry
OBJECT-TYPE
A row in the IPv6 PIP table.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1not-accessiblecurrent
pip6NewCfgPip
OBJECT-TYPE
IPv6 PIP address by the instance of the pip6CurCfgIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.1DisplayString (SIZE(0..50))read-onlycurrent
pip6NewCfgPortMap
OBJECT-TYPE
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
pip6NewCfgVlanMap
OBJECT-TYPE
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
pip6NewCfgDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.4INTEGER {other(1), delete(2)}read-createcurrent
pip6NewCfgAddPortVlan
OBJECT-TYPE
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.5Integer32read-createcurrent
pip6NewCfgRemovePortVlan
OBJECT-TYPE
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.6Integer32read-createcurrent
pip6NewCfgAddPort
OBJECT-TYPE
The Port to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.7Integer32read-createcurrent
pip6NewCfgAddVlan
OBJECT-TYPE
The VLAN to be associated with the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.8Integer32read-createcurrent
pip6NewCfgRemovePort
OBJECT-TYPE
The Port to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.9Integer32read-createcurrent
pip6NewCfgRemoveVlan
OBJECT-TYPE
The VLAN to be disassociated from the PIP. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.10Integer32read-createcurrent
linklbCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.16
slbCurCfgLinklbState
OBJECT-TYPE
Enable or disable Inbound Link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgLinklbState
OBJECT-TYPE
Enable or disable Inbound Link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.2INTEGER {enabled(1), disabled(2)}read-writecurrent
slbCurCfgLinklbRealGroup
OBJECT-TYPE
The real server group number for Link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.3Integer32read-onlycurrent
slbNewCfgLinklbRealGroup
OBJECT-TYPE
The real server group number for Link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.4Integer32read-writecurrent
slbLinklbDrecord
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.16.5
slbDrecordTableMaxSize
OBJECT-TYPE
The maximum number of entries in Drecord table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.1Integer32read-onlycurrent
slbCurCfgDrecordTable
OBJECT-TYPE
The table of Domain records for Inbound link load balancing in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2not-accessiblecurrent
slbCurCfgDrecordEntry
OBJECT-TYPE
A row in the Domain record table for Inbound Link Load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1not-accessiblecurrent
slbCurCfgDrecordIndex
OBJECT-TYPE
The index of the Domain record table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.1INTEGER (1..64)read-onlycurrent
slbCurCfgDomainRecordState
OBJECT-TYPE
Enable/disable a domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgDomainRecordName
OBJECT-TYPE
The name of the domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.3DisplayString (SIZE(0..34))read-onlycurrent
slbNewCfgDrecordTable
OBJECT-TYPE
The table of Domain records for Inbound link load balancing in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3not-accessiblecurrent
slbNewCfgDrecordEntry
OBJECT-TYPE
A row in the Domain record table for Inbound Link Load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1not-accessiblecurrent
slbNewCfgDrecordIndex
OBJECT-TYPE
The index of the Domain record table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.1INTEGER (1..64)read-onlycurrent
slbNewCfgDomainRecordState
OBJECT-TYPE
Enable/disable a domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.2INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgDomainRecordName
OBJECT-TYPE
The name of the domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.3DisplayString (SIZE(0..34))read-createcurrent
slbNewCfgDrecordDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbDrecordVirtRealMappingTableMaxSize
OBJECT-TYPE
The maximum number of entries in Drecord Virtual Real server mapping Table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.4Integer32read-onlycurrent
slbCurCfgDrecordVirtRealMappingTable
OBJECT-TYPE
The table of Domain records and virtual server and real server mappings.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5not-accessiblecurrent
slbCurCfgDrecordVirtRealMappingEntry
OBJECT-TYPE
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1not-accessiblecurrent
slbCurCfgDomainRecordIndex
OBJECT-TYPE
The number of the domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.1INTEGER (1..64)read-onlycurrent
slbCurCfgEntryIndex
OBJECT-TYPE
The number of the entry virtual real server mapping.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.2INTEGER (1..8)read-onlycurrent
slbCurCfgDrecordVirtServer
OBJECT-TYPE
The virtual server number.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.3Integer32read-onlycurrent
slbCurCfgDrecordRealServer
OBJECT-TYPE
The Real server number.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.4Integer32read-onlycurrent
slbCurCfgDrecordEntryState
OBJECT-TYPE
Enable/disable a mapping in this table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgDrecordVirtRealMappingTable
OBJECT-TYPE
The table of Domain records and virtual server and real server mappings.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6not-accessiblecurrent
slbNewCfgDrecordVirtRealMappingEntry
OBJECT-TYPE
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1not-accessiblecurrent
slbNewCfgDomainRecordIndex
OBJECT-TYPE
The number of the domain record.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.1INTEGER (1..64)read-onlycurrent
slbNewCfgEntryIndex
OBJECT-TYPE
The number of the virtual real server mapping.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.2INTEGER (1..8)read-onlycurrent
slbNewCfgDrecordVirtServer
OBJECT-TYPE
The virtual server number.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.3Integer32read-createcurrent
slbNewCfgDrecordRealServer
OBJECT-TYPE
The Real server number.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.4Integer32read-createcurrent
slbNewCfgDrecordEntryState
OBJECT-TYPE
Enable/disable a mapping in this table.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgDrecordEntryDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.6INTEGER {other(1), delete(2)}read-createcurrent
slbCurCfgLinklbTTL
OBJECT-TYPE
Set Time to Live for DNS resource records.
1.3.6.1.4.1.1872.2.5.4.1.1.16.6INTEGER (0..65535)read-onlycurrent
slbNewCfgLinklbTTL
OBJECT-TYPE
Set Time to Live for DNS resource records.
1.3.6.1.4.1.1872.2.5.4.1.1.16.7INTEGER (0..65535)read-writecurrent
smtportCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.17
slbSmtportTableMaxSize
OBJECT-TYPE
The maximum number of entries in service mapping real port table.
1.3.6.1.4.1.1872.2.5.4.1.1.17.1Integer32read-onlycurrent
slbCurCfgSmtportTable
OBJECT-TYPE
The service mapping real port table.
1.3.6.1.4.1.1872.2.5.4.1.1.17.2not-accessiblecurrent
slbCurCfgSmtportEntry
OBJECT-TYPE
A row in the service mapping real port table.
1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1not-accessiblecurrent
slbCurCfgSmtportIndex
OBJECT-TYPE
The service mapping real port index.
1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.1Integer32read-onlycurrent
slbCurCfgSmtportNum
OBJECT-TYPE
The service mapping real port number.
1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.2INTEGER (2..65534)read-onlycurrent
slbNewCfgSmtportTable
OBJECT-TYPE
The table of real server service ports.
1.3.6.1.4.1.1872.2.5.4.1.1.17.3not-accessiblecurrent
slbNewCfgSmtportEntry
OBJECT-TYPE
A row in the service mapping real port table.
1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1not-accessiblecurrent
slbNewCfgSmtportIndex
OBJECT-TYPE
The service mapping real port index
1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.1Integer32read-onlycurrent
slbNewCfgSmtportNum
OBJECT-TYPE
The service mapping real port number.
1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.2INTEGER (2..65534)read-createcurrent
slbNewCfgSmtportDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.3INTEGER {other(1), delete(2)}read-createcurrent
slbSmtportTableAvaibleIndex
OBJECT-TYPE
The first free real port index of the Service Mapping Table. Value 0 will be returned when all 16 real ports are configured.
1.3.6.1.4.1.1872.2.5.4.1.1.17.4Integer32read-onlycurrent
acclCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.18
caching
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.18.1
slbCurAcclCfgCachememcache
OBJECT-TYPE
Maximum percentage of Alteon RAM to be allocate for caching.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.1INTEGER (1..50)read-onlycurrent
slbNewAcclCfgCachememcache
OBJECT-TYPE
Defines the maximum percentage of Alteon RAM to be allocate for caching.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.2INTEGER (1..50)read-writecurrent
slbCurAcclCfgCacheOnOff
OBJECT-TYPE
Globally ON or OFF of caching.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.3INTEGER {on(1), off(2)}read-onlycurrent
slbNewAcclCfgCacheOnOff
OBJECT-TYPE
Globally ON or OFF of caching.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.4INTEGER {on(1), off(2)}read-writecurrent
slbCurAcclCfgCachePolTable
OBJECT-TYPE
The table for configuring caching policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5not-accessiblecurrent
slbCurAcclCfgCachePolEntry
OBJECT-TYPE
A row in the caching policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1not-accessiblecurrent
slbCurAcclCfgCachePolNameIdIndex
OBJECT-TYPE
The caching policy ID(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCachePolName
OBJECT-TYPE
Cache policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.2DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCachePolExpireTime
OBJECT-TYPE
Maximum expiration time in seconds.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.3INTEGERread-onlycurrent
slbCurAcclCfgCachePolMinSize
OBJECT-TYPE
Minimum Object size to be stored in bytes.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.4INTEGERread-onlycurrent
slbCurAcclCfgCachePolMaxSize
OBJECT-TYPE
Maximum Object size to be stored in bytes.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.5INTEGERread-onlycurrent
slbCurAcclCfgCachePolURLList
OBJECT-TYPE
URL list which is associated with this policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.6DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCachePolStore
OBJECT-TYPE
Caching behavior for storing new objects in cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.7INTEGER {srvrhdr(1), cacheall(2)}read-onlycurrent
slbCurAcclCfgCachePolServe
OBJECT-TYPE
Cache behavior when serving clients with objects.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.8INTEGER {clnthdr(1), refresh(2), cache(3)}read-onlycurrent
slbCurAcclCfgCachePolQuery
OBJECT-TYPE
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.9INTEGER {consider(1), ignore(2)}read-onlycurrent
slbCurAcclCfgCachePolBrowser
OBJECT-TYPE
Optimize browser cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCachePolAdminStatus
OBJECT-TYPE
Status (enable/disable) of caching policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCachePolTable
OBJECT-TYPE
The table for configuring caching policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6not-accessiblecurrent
slbNewAcclCfgCachePolEntry
OBJECT-TYPE
A row in the caching policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1not-accessiblecurrent
slbNewAcclCfgCachePolNameIdIndex
OBJECT-TYPE
The caching policy ID(key id) as an index, length of the string should be 32 charecters.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCachePolName
OBJECT-TYPE
Cache policy name, length of the string should be 32 charecters.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.2DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCachePolExpireTime
OBJECT-TYPE
Set maximum expiration time, Range is 60- 43,200,000 seconds (~500 days).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.3INTEGERread-createcurrent
slbNewAcclCfgCachePolMinSize
OBJECT-TYPE
Minimum Object size to be stored [Bytes], Values: 1-65536.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.4INTEGERread-createcurrent
slbNewAcclCfgCachePolMaxSize
OBJECT-TYPE
Maximum Object size to be stored [Bytes], Values: 1-512000000.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.5INTEGERread-createcurrent
slbNewAcclCfgCachePolURLList
OBJECT-TYPE
URL list to be associated with this policy, Values: 1-32 character string.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.6DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCachePolStore
OBJECT-TYPE
Define caching behavior for storing New objects in cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.7INTEGER {srvrhdr(1), cacheall(2)}read-createcurrent
slbNewAcclCfgCachePolServe
OBJECT-TYPE
Define cache behavior when serving clients with objects.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.8INTEGER {clnthdr(1), refresh(2), cache(3)}read-createcurrent
slbNewAcclCfgCachePolQuery
OBJECT-TYPE
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.9INTEGER {consider(1), ignore(2)}read-createcurrent
slbNewAcclCfgCachePolBrowser
OBJECT-TYPE
Optimize browser cache.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCachePolAdminStatus
OBJECT-TYPE
Enable or disable caching policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.11INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCachePolDelete
OBJECT-TYPE
Delete Caching policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.12INTEGER {other(1), delete(2)}read-createcurrent
slbCurAcclCfgCacheUrlListTable
OBJECT-TYPE
The table for configuring caching URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7not-accessiblecurrent
slbCurAcclCfgCacheUrlListEntry
OBJECT-TYPE
A row in the caching URL LIST table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1not-accessiblecurrent
slbCurAcclCfgCacheUrlListIdIndex
OBJECT-TYPE
The caching policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCacheUrlListName
OBJECT-TYPE
Cache URL LIST name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.2DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCacheUrlListAdminStatus
OBJECT-TYPE
Status (enable/disable) of caching URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCacheUrlListTable
OBJECT-TYPE
The table for configuring caching URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8not-accessiblecurrent
slbNewAcclCfgCacheUrlListEntry
OBJECT-TYPE
A row in the caching URL LIST table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1not-accessiblecurrent
slbNewAcclCfgCacheUrlListIdIndex
OBJECT-TYPE
The caching policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCacheUrlListName
OBJECT-TYPE
Cache URL LIST name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.2DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCacheUrlListAdminStatus
OBJECT-TYPE
Status (enable/disable) of caching URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.3INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCacheUrlListDel
OBJECT-TYPE
Delete Caching URL list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.5INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCacheUrlListCopy
OBJECT-TYPE
Duplicating an entire Rule-List by defining the destination Rule-list id.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.6DisplayStringread-createcurrent
slbCurAcclCfgCacheUrlRuleTable
OBJECT-TYPE
The table for configuring caching URL Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9not-accessiblecurrent
slbCurAcclCfgCacheUrlRuleEntry
OBJECT-TYPE
A row in the caching URL Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1not-accessiblecurrent
slbCurAcclCfgCacheUrlRuleListIdIndex
OBJECT-TYPE
The caching policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCacheUrlRuleIndex
OBJECT-TYPE
The caching URL Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.2INTEGERread-onlycurrent
slbCurAcclCfgCacheUrlRuleName
OBJECT-TYPE
The caching URL Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.3DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCacheUrlRuleDomainM
OBJECT-TYPE
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.4INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCacheUrlRuleDomain
OBJECT-TYPE
Defines the Virtual Host for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.5DisplayString (SIZE(0..255))read-onlycurrent
slbCurAcclCfgCacheUrlRuleURLm
OBJECT-TYPE
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.6INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCacheUrlRuleURL
OBJECT-TYPE
Defines URL of specific object (file/folder) to be matched by this rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.7DisplayStringread-onlycurrent
slbCurAcclCfgCacheUrlRuleExpire
OBJECT-TYPE
The Maximum time for the cache object to served from cache (in seconds).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.8INTEGERread-onlycurrent
slbCurAcclCfgCacheUrlRuleCache
OBJECT-TYPE
Defines if the matched response should be cached or not.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCacheUrlRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of caching URL Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCacheUrlRuleTable
OBJECT-TYPE
The table for configuring caching URL Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10not-accessiblecurrent
slbNewAcclCfgCacheUrlRuleEntry
OBJECT-TYPE
A row in the caching URL Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1not-accessiblecurrent
slbNewAcclCfgCacheUrlRuleListIdIndex
OBJECT-TYPE
The caching policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCacheUrlRuleIndex
OBJECT-TYPE
The caching URL Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.2INTEGERread-onlycurrent
slbNewAcclCfgCacheUrlRuleName
OBJECT-TYPE
The caching URL Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.3DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCacheUrlRuleDomainM
OBJECT-TYPE
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.4INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCacheUrlRuleDomain
OBJECT-TYPE
Defines the Virtual Host for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.5DisplayString (SIZE(0..255))read-createcurrent
slbNewAcclCfgCacheUrlRuleURLm
OBJECT-TYPE
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.6INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCacheUrlRuleURL
OBJECT-TYPE
Defines URL of specific object (file/folder) to be matched by this rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.7DisplayStringread-createcurrent
slbNewAcclCfgCacheUrlRuleExpire
OBJECT-TYPE
The Maximum time for the cache object to served from cache (in seconds).
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.8INTEGERread-createcurrent
slbNewAcclCfgCacheUrlRuleCache
OBJECT-TYPE
Defines if the matched response should be cached or not.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCacheUrlRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of caching URL Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCacheUrlRuleDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.11INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCacheUrlRuleCopy
OBJECT-TYPE
Copy rule to another index in the same rule-list. When read, zero is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.12INTEGERread-createcurrent
compression
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.18.2
slbCurAcclCfgCompOnOff
OBJECT-TYPE
Globally ON or OFF of compression.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.1INTEGER {on(1), off(2)}read-onlycurrent
slbNewAcclCfgCompOnOff
OBJECT-TYPE
Globally ON or OFF of compression.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.2INTEGER {on(1), off(2)}read-writecurrent
slbCurAcclCfgCompPolTable
OBJECT-TYPE
The table for configuring compression policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3not-accessiblecurrent
slbCurAcclCfgCompPolEntry
OBJECT-TYPE
A row in the compression policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1not-accessiblecurrent
slbCurAcclCfgCompPolNameIdIndex
OBJECT-TYPE
The compression policy ID(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompPolName
OBJECT-TYPE
Compression policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.2DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompPolAlgrthm
OBJECT-TYPE
Preferred compression algorithm.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.3INTEGER {gzip(1), deflate(2)}read-onlycurrent
slbCurAcclCfgCompPolComplv1
OBJECT-TYPE
Compression level.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.4INTEGER (1..9)read-onlycurrent
slbCurAcclCfgCompPolMinSize
OBJECT-TYPE
Minimum file size to be compressed [Byte].
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.5INTEGER (1..65535)read-onlycurrent
slbCurAcclCfgCompPolMaxSize
OBJECT-TYPE
Maximum file size to be compressed [Byte].
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.6INTEGERread-onlycurrent
slbCurAcclCfgCompPolURLList
OBJECT-TYPE
URL list which is associated with this policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.7DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompPolBrwsList
OBJECT-TYPE
Browser list which is associated with this policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.8DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompPolPreDefBrwsRuleList
OBJECT-TYPE
Enable/Disable predefined browser exceptions rule-list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCompPolCompsrv
OBJECT-TYPE
Enable/Disable compression by real server.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCompPolAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCompPolTable
OBJECT-TYPE
The table for configuring compression policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4not-accessiblecurrent
slbNewAcclCfgCompPolEntry
OBJECT-TYPE
A row in the compression policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1not-accessiblecurrent
slbNewAcclCfgCompPolNameIdIndex
OBJECT-TYPE
The compression policy ID(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCompPolName
OBJECT-TYPE
Compression policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.2DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompPolAlgrthm
OBJECT-TYPE
Preferred compression algorithm.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.3INTEGER {gzip(1), deflate(2)}read-createcurrent
slbNewAcclCfgCompPolComplv1
OBJECT-TYPE
Compression level.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.4INTEGER (1..9)read-createcurrent
slbNewAcclCfgCompPolMinSize
OBJECT-TYPE
Minimum file size to be compressed [Byte].
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.5INTEGER (1..65535)read-createcurrent
slbNewAcclCfgCompPolMaxSize
OBJECT-TYPE
Maximum file size to be compressed [Byte], Values: 1-2000000000, 0-Unlimited
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.6INTEGERread-createcurrent
slbNewAcclCfgCompPolURLList
OBJECT-TYPE
URL list which is associated with this policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.7DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompPolBrwsList
OBJECT-TYPE
Browser list which is associated with this policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.8DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompPolPreDefBrwsRuleList
OBJECT-TYPE
Enable/Disable predefined browser exceptions rule-list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompPolCompsrv
OBJECT-TYPE
Enable/Disable compression by real server.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompPolAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.11INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompPolDelete
OBJECT-TYPE
Delete compression policy.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.12INTEGER {other(1), delete(2)}read-createcurrent
slbCurAcclCfgCompUrlListTable
OBJECT-TYPE
The table for configuring compression URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5not-accessiblecurrent
slbCurAcclCfgCompUrlListEntry
OBJECT-TYPE
A row in the compression URL LIST table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1not-accessiblecurrent
slbCurAcclCfgCompUrlListIdIndex
OBJECT-TYPE
The compression policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompUrlListName
OBJECT-TYPE
Compression URL LIST name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.2DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompUrlListAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCompUrlListTable
OBJECT-TYPE
The table for configuring compression URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6not-accessiblecurrent
slbNewAcclCfgCompUrlListEntry
OBJECT-TYPE
A row in the compression URL LIST table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1not-accessiblecurrent
slbNewAcclCfgCompUrlListIdIndex
OBJECT-TYPE
The compression policy URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCompUrlListName
OBJECT-TYPE
Compression URL LIST name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.2DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompUrlListAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression URL LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.3INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompUrlListDel
OBJECT-TYPE
Delete Compression URL list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCompUrlListCopy
OBJECT-TYPE
Duplicating an entire Rule-List by defining the destination Rule-list id.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.5DisplayStringread-createcurrent
slbCurAcclCfgCompUrlRuleTable
OBJECT-TYPE
The table for configuring compression URL Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7not-accessiblecurrent
slbCurAcclCfgCompUrlRuleEntry
OBJECT-TYPE
A row in the compression URL Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1not-accessiblecurrent
slbCurAcclCfgCompUrlRuleListIdIndex
OBJECT-TYPE
The compression URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompUrlRuleIndex
OBJECT-TYPE
The compression URL Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.2INTEGERread-onlycurrent
slbCurAcclCfgCompUrlRuleName
OBJECT-TYPE
The compression URL Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.3DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompUrlRuleDomainM
OBJECT-TYPE
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.4INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCompUrlRuleDomain
OBJECT-TYPE
Defines the Virtual Host for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.5DisplayString (SIZE(0..255))read-onlycurrent
slbCurAcclCfgCompUrlRuleURLm
OBJECT-TYPE
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.6INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCompUrlRuleURL
OBJECT-TYPE
Defines URL of specific object (file/folder) to be matched by this rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.7DisplayStringread-onlycurrent
slbCurAcclCfgCompUrlRuleCompress
OBJECT-TYPE
Enable/Disable the compression.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.8INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCompUrlRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression URL Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCompUrlRuleTable
OBJECT-TYPE
The table for configuring compression URL Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8not-accessiblecurrent
slbNewAcclCfgCompUrlRuleEntry
OBJECT-TYPE
A row in the compression URL Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1not-accessiblecurrent
slbNewAcclCfgCompUrlRuleListIdIndex
OBJECT-TYPE
The compression URL LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCompUrlRuleIndex
OBJECT-TYPE
The compression URL Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.2INTEGERread-onlycurrent
slbNewAcclCfgCompUrlRuleName
OBJECT-TYPE
The compression URL Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.3DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompUrlRuleDomainM
OBJECT-TYPE
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.4INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCompUrlRuleDomain
OBJECT-TYPE
Defines the Virtual Host for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.5DisplayString (SIZE(0..255))read-createcurrent
slbNewAcclCfgCompUrlRuleURLm
OBJECT-TYPE
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.6INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCompUrlRuleURL
OBJECT-TYPE
Defines URL of specific object (file/folder) to be matched by this rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.7DisplayStringread-createcurrent
slbNewAcclCfgCompUrlRuleCompress
OBJECT-TYPE
Enable/Disable the compression.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompUrlRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression URL Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompUrlRuleDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.10INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCompUrlRuleCopy
OBJECT-TYPE
Copy rule to another index in the same rule-list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.11DisplayStringread-createcurrent
slbCurAcclCfgCompBrwsListTable
OBJECT-TYPE
The table for configuring compression browser LIST.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9not-accessiblecurrent
slbCurAcclCfgCompBrwsListEntry
OBJECT-TYPE
A row in the compression browser LIST table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1not-accessiblecurrent
slbCurAcclCfgCompBrwsListIdIndex
OBJECT-TYPE
The compression policy browser LIST (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompBrwsListName
OBJECT-TYPE
Compression browser list name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.2DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompBrwsListAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression browser list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCompBrwsListTable
OBJECT-TYPE
The table for configuring compression browser list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10not-accessiblecurrent
slbNewAcclCfgCompBrwsListEntry
OBJECT-TYPE
A row in the compression browser list table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1not-accessiblecurrent
slbNewAcclCfgCompBrwsListIdIndex
OBJECT-TYPE
The compression policy browser list (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCompBrwsListName
OBJECT-TYPE
Compression browser list name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.2DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompBrwsListAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression browser list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.3INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompBrwsListDel
OBJECT-TYPE
Delete Compression Browser list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCompBrwsListCopy
OBJECT-TYPE
Duplicating an entire browser list by defining the destination browser list id.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.5DisplayStringread-createcurrent
slbCurAcclCfgCompBrwsRuleTable
OBJECT-TYPE
The table for configuring compression browser Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11not-accessiblecurrent
slbCurAcclCfgCompBrwsRuleEntry
OBJECT-TYPE
A row in the compression browser Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1not-accessiblecurrent
slbCurAcclCfgCompBrwsRuleListIdIndex
OBJECT-TYPE
The compression browser list (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompBrwsRuleIndex
OBJECT-TYPE
The compression browser Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.2INTEGERread-onlycurrent
slbCurAcclCfgCompBrwsRuleName
OBJECT-TYPE
The compression browser Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.3DisplayString (SIZE(0..31))read-onlycurrent
slbCurAcclCfgCompBrwsRuleAgentM
OBJECT-TYPE
Defines whether user agent field should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.4INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCompBrwsRuleAgent
OBJECT-TYPE
Defines the User-Agent string for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.5DisplayString (SIZE(0..255))read-onlycurrent
slbCurAcclCfgCompBrwsRuleContentM
OBJECT-TYPE
Defines whether content type should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.6INTEGER {any(1), text(2), regex(3)}read-onlycurrent
slbCurAcclCfgCompBrwsRuleContent
OBJECT-TYPE
Defines the Content-type string for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.7DisplayStringread-onlycurrent
slbCurAcclCfgCompBrwsRuleCompress
OBJECT-TYPE
Enable/Disable the compression. Defines if the matched response should be compressed or not
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.8INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurAcclCfgCompBrwsRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression browser Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewAcclCfgCompBrwsRuleTable
OBJECT-TYPE
The table for configuring compression browser Rules.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12not-accessiblecurrent
slbNewAcclCfgCompBrwsRuleEntry
OBJECT-TYPE
A row in the compression browser Rule table.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1not-accessiblecurrent
slbNewAcclCfgCompBrwsRuleListIdIndex
OBJECT-TYPE
The compression browser list (key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.1DisplayString (SIZE(0..31))read-onlycurrent
slbNewAcclCfgCompBrwsRuleIndex
OBJECT-TYPE
The compression browser Rule number as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.2INTEGERread-onlycurrent
slbNewAcclCfgCompBrwsRuleName
OBJECT-TYPE
The compression browser Rule name.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.3DisplayString (SIZE(0..31))read-createcurrent
slbNewAcclCfgCompBrwsRuleAgentM
OBJECT-TYPE
Defines whether user agent field should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.4INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCompBrwsRuleAgent
OBJECT-TYPE
Defines the User-Agent string for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.5DisplayString (SIZE(0..255))read-createcurrent
slbNewAcclCfgCompBrwsRuleContentM
OBJECT-TYPE
Defines whether content type should be evaluated as String, Regex or match, any (default any).
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.6INTEGER {any(1), text(2), regex(3)}read-createcurrent
slbNewAcclCfgCompBrwsRuleContent
OBJECT-TYPE
Defines the Content-type string for which this rule applies.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.7DisplayStringread-createcurrent
slbNewAcclCfgCompBrwsRuleCompress
OBJECT-TYPE
Enable/Disable the compression. Defines if the matched response should be compressed or not
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompBrwsRuleAdminStatus
OBJECT-TYPE
Status (enable/disable) of compression browser Rule.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewAcclCfgCompBrwsRuleDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.10INTEGER {other(1), delete(2)}read-createcurrent
slbNewAcclCfgCompBrwsRuleCopy
OBJECT-TYPE
Copy rule to another index in the same rule-list.
1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.11INTEGERread-createcurrent
sslCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.19
slbCurSslCfgSSLAdminStatus
OBJECT-TYPE
Status (enable/disable) of SSL policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewSslCfgSSLAdminStatus
OBJECT-TYPE
Status (enable/disable) of SSL policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.2INTEGER {enabled(1), disabled(2)}read-createcurrent
sslPol
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.19.3
slbCurSslCfgSSLPolTable
OBJECT-TYPE
The table for configuring ssl policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5not-accessiblecurrent
slbCurSslCfgSSLPolEntry
OBJECT-TYPE
A row in the ssl policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1not-accessiblecurrent
slbCurSslCfgSSLPolNameIdIndex
OBJECT-TYPE
The SSL policy name(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.1DisplayStringread-onlycurrent
slbCurSslCfgSSLPolName
OBJECT-TYPE
SSL policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.2DisplayStringread-onlycurrent
slbCurSslCfgSSLPolPassInfoCipherName
OBJECT-TYPE
The SSL cipher-suite header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.3DisplayStringread-onlycurrent
slbCurSslCfgSSLPolPassInfoCipherFlag
OBJECT-TYPE
SSL cipher-suite information to backend servers enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.4INTEGERread-onlycurrent
slbCurSslCfgSSLPolPassInfoVersionName
OBJECT-TYPE
SSL version header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.5DisplayStringread-onlycurrent
slbCurSslCfgSSLPolPassInfoVersionFlag
OBJECT-TYPE
SSL version information to backend servers enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.6INTEGERread-onlycurrent
slbCurSslCfgSSLPolPassInfoHeadBitsName
OBJECT-TYPE
The passive cipher bits information to backend server.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.7DisplayStringread-onlycurrent
slbCurSslCfgSSLPolPassInfoHeadBitsFlag
OBJECT-TYPE
Cipher bits information to backend servers enabled.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.8INTEGERread-onlycurrent
slbCurSslCfgSSLPolPassInfoFrontend
OBJECT-TYPE
Enable/Disable add Front-End-Https: on header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.9INTEGERread-onlycurrent
slbCurSslCfgSSLPolCipherName
OBJECT-TYPE
Cipher name for SSL.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.10INTEGERread-onlycurrent
slbCurSslCfgSSLPolCipherUserdef
OBJECT-TYPE
Cipher-suite allowed for SSL.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.11DisplayStringread-onlycurrent
slbCurSslCfgSSLPolIntermcaChainName
OBJECT-TYPE
Intermediate CA certificate chain name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.12DisplayStringread-onlycurrent
slbCurSslCfgSSLPolIntermcaChainType
OBJECT-TYPE
Intermediate CA certificate chain type certificate=cert,Group=group,None=<empty string>.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.13DisplayStringread-onlycurrent
slbCurSslCfgSSLPolBecipher
OBJECT-TYPE
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high] .
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.14INTEGER {low(0), medium(1), high(2)}read-onlycurrent
slbCurSslCfgSSLPolAuthpol
OBJECT-TYPE
Client authentication policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.15DisplayStringread-onlycurrent
slbCurSslCfgSSLPolConvuri
OBJECT-TYPE
Host regex for HTTP redirection conversion.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.16DisplayStringread-onlycurrent
slbCurSslCfgSSLPolBessl
OBJECT-TYPE
Enable/Disable backend SSL encryption.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurSslCfgSSLPolConvert
OBJECT-TYPE
Enable/Disable HTTP redirection conversion.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.18INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurSslCfgSSLPolAdminStatus
OBJECT-TYPE
Enable or disable ssl policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.19INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewSslCfgSSLPolTable
OBJECT-TYPE
The table for configuring ssl policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7not-accessiblecurrent
slbNewSslCfgSSLPolEntry
OBJECT-TYPE
A row in the ssl policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1not-accessiblecurrent
slbNewSslCfgSSLPolNameIdIndex
OBJECT-TYPE
The SSL policy name(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.1DisplayStringread-createcurrent
slbNewSslCfgSSLPolName
OBJECT-TYPE
SSL policy name,length of the string should be 32 charecters.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.2DisplayStringread-createcurrent
slbNewSslCfgSSLPolPassInfoCipherName
OBJECT-TYPE
The SSL cipher-suite header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.3DisplayStringread-createcurrent
slbNewSslCfgSSLPolPassInfoCipherFlag
OBJECT-TYPE
Enable/Disable cipher-suite information to backend servers.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolPassInfoVersionName
OBJECT-TYPE
SSL version header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.5DisplayStringread-createcurrent
slbNewSslCfgSSLPolPassInfoVersionFlag
OBJECT-TYPE
Enable/Disable SSL version information to backend servers.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolPassInfoHeadBitsName
OBJECT-TYPE
The passive cipher bits information to backend server.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.7DisplayStringread-createcurrent
slbNewSslCfgSSLPolPassInfoHeadBitsFlag
OBJECT-TYPE
Enable/Disable Cipher bits information to backend servers.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolPassInfoFrontend
OBJECT-TYPE
Enable/Disable add Front-End-Https: on header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolCipherName
OBJECT-TYPE
Cipher name for SSL.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.10INTEGERread-createcurrent
slbNewSslCfgSSLPolCipherUserdef
OBJECT-TYPE
Cipher-suite allowed for SSL.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.11DisplayStringread-createcurrent
slbNewSslCfgSSLPolIntermcaChainName
OBJECT-TYPE
Intermediate CA certificate chain name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.12DisplayStringread-createcurrent
slbNewSslCfgSSLPolIntermcaChainType
OBJECT-TYPE
Intermediate CA certificate chain type certificate=cert,Group=group,None=<empty string>.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.13DisplayStringread-createcurrent
slbNewSslCfgSSLPolBecipher
OBJECT-TYPE
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high].
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.14INTEGER {low(0), medium(1), high(2)}read-createcurrent
slbNewSslCfgSSLPolAuthpol
OBJECT-TYPE
Client authentication policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.15DisplayStringread-createcurrent
slbNewSslCfgSSLPolConvuri
OBJECT-TYPE
Host regex for HTTP redirection conversion.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.16DisplayStringread-createcurrent
slbNewSslCfgSSLPolBessl
OBJECT-TYPE
Enable/Disable backend SSL encryption.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.17INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolConvert
OBJECT-TYPE
Enable/Disable HTTP redirection conversion.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolAdminStatus
OBJECT-TYPE
Enable or disable ssl policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgSSLPolDel
OBJECT-TYPE
Delete SSL policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.20INTEGER {other(1), delete(2)}read-createcurrent
authPol
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.19.4
slbCurSslCfgAuthPolTable
OBJECT-TYPE
The table for configuring Client Authentication policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1not-accessiblecurrent
slbCurSslCfgAuthPolEntry
OBJECT-TYPE
A row in the Client Authentication policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1not-accessiblecurrent
slbCurSslCfgAuthPolNameIdIndex
OBJECT-TYPE
The Auth policy name(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.1DisplayStringread-onlycurrent
slbCurSslCfgAuthPolName
OBJECT-TYPE
Auth policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.2DisplayStringread-onlycurrent
slbCurSslCfgAuthPolValidityMethod
OBJECT-TYPE
Certificate validation check method.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.3INTEGERread-onlycurrent
slbCurSslCfgAuthPolValidityStaturi
OBJECT-TYPE
Static URI for OCSP validation requests.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.4DisplayStringread-onlycurrent
slbCurSslCfgAuthPolValidityUriprior
OBJECT-TYPE
OCSP URI priority.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.5INTEGER {clientcert(1), staticuri(2)}read-onlycurrent
slbCurSslCfgAuthPolValidityCachtime
OBJECT-TYPE
OCSP response cache time.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.6INTEGERread-onlycurrent
slbCurSslCfgAuthPolValidityTimedev
OBJECT-TYPE
OCSP response time deviation.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.7INTEGERread-onlycurrent
slbCurSslCfgAuthPolValidityAlgorthmName
OBJECT-TYPE
Allowed signing algorithm for the OCSP response[all, md5, sha1, sha256, sha384, sha512].
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.8DisplayStringread-onlycurrent
slbCurSslCfgAuthPolValidityVchain
OBJECT-TYPE
Enable/Disable validating every CA certificate in the CA chain u.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurSslCfgAuthPolValiditySecure
OBJECT-TYPE
Enable/Disable secure OCSP response by sending random nonce with.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurSslCfgAuthPolPassinfoVersionName
OBJECT-TYPE
Certificate version header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.11DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoVersionFlag
OBJECT-TYPE
Pass certificate version information to backend server?.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.12INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoSerialName
OBJECT-TYPE
Certificate serial-number header .
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.13DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoSerialFlag
OBJECT-TYPE
Pass certificate serial-number to backend server?.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.14INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoAlgoName
OBJECT-TYPE
Certificate signature algorithm header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.15DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoAlgoFlag
OBJECT-TYPE
Pass certificate Signature Algorithm to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.16INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoIssuerName
OBJECT-TYPE
Certificate issuer header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.17DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoIssuerFlag
OBJECT-TYPE
Pass certificate issuer information to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.18INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoNbeforeName
OBJECT-TYPE
Certificate 'Not Before Validity Dates' header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.19DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoNbeforeFlag
OBJECT-TYPE
Pass certificate 'Not Before' Validity Date to backend serverr?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.20INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoNafterName
OBJECT-TYPE
Certificate 'Not After Validity Dates' header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.21DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoNafterFlag
OBJECT-TYPE
Pass certificate 'Not After' Validity Date to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.22INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoSubjectName
OBJECT-TYPE
Certificate subject header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.23DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoSubjectFlag
OBJECT-TYPE
Pass certificate subject to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.24INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoKeytypeName
OBJECT-TYPE
Certificate Public Key Type header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.25DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoKeytypeFlag
OBJECT-TYPE
Pass certificate Public Key Type information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.26INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoMd5Name
OBJECT-TYPE
Certificate MD5 Hash header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.27DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoMd5Flag
OBJECT-TYPE
Pass certificate MD5 Hash information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.28INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoCertName
OBJECT-TYPE
Certificate header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.29DisplayStringread-onlycurrent
slbCurSslCfgAuthPolPassinfoCertFormat
OBJECT-TYPE
Certificate Header Lines Format.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.30INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoCertFlag
OBJECT-TYPE
Pass certificate information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.31INTEGERread-onlycurrent
slbCurSslCfgAuthPolPassinfoCharset
OBJECT-TYPE
Set the character set to be used for information.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.32INTEGERread-onlycurrent
slbCurSslCfgAuthPolTrustcaChainName
OBJECT-TYPE
Trusted client's CA certificate.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.33DisplayStringread-onlycurrent
slbCurSslCfgAuthPolTrustcaChainType
OBJECT-TYPE
Tusted client's CA certificate type certificate=cert,Group=group,None=<empty string>.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.34DisplayStringread-onlycurrent
slbCurSslCfgAuthPolCadepth
OBJECT-TYPE
Maximum depth to search the trusted CA in the CA certificate.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.35INTEGERread-onlycurrent
slbCurSslCfgAuthPolCaverify
OBJECT-TYPE
Certificate's CA verification level.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.36INTEGERread-onlycurrent
slbCurSslCfgAuthPolFailurl
OBJECT-TYPE
URL for redirection when client authentication fails
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.37DisplayStringread-onlycurrent
slbCurSslCfgAuthPolAdminStatus
OBJECT-TYPE
Enable or disable Auth policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.38INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurSslCfgAuthPolPassinfoComp2424
OBJECT-TYPE
Enable/Disable the 2424SSL Headers Compliance Mode.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.39INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewSslCfgAuthPolTable
OBJECT-TYPE
The table for configuring Client Authentication policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3not-accessiblecurrent
slbNewSslCfgAuthPolEntry
OBJECT-TYPE
A row in the Client Authentication policy table.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1not-accessiblecurrent
slbNewSslCfgAuthPolNameIdIndex
OBJECT-TYPE
The Auth policy name(key id) as an index.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.1DisplayStringread-onlycurrent
slbNewSslCfgAuthPolName
OBJECT-TYPE
Auth policy name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.2DisplayStringread-createcurrent
slbNewSslCfgAuthPolValidityMethod
OBJECT-TYPE
Certificate validation check method.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.3INTEGERread-createcurrent
slbNewSslCfgAuthPolValidityStaturi
OBJECT-TYPE
Static URI for OCSP validation requests.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.4DisplayStringread-createcurrent
slbNewSslCfgAuthPolValidityUriprior
OBJECT-TYPE
OCSP URI priority.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.5INTEGER {clientcert(1), staticuri(2)}read-createcurrent
slbNewSslCfgAuthPolValidityCachtime
OBJECT-TYPE
OCSP response cache time.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.6INTEGERread-createcurrent
slbNewSslCfgAuthPolValidityTimedev
OBJECT-TYPE
OCSP response time deviation.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.7INTEGERread-createcurrent
slbNewSslCfgAuthPolValidityAlgorthmName
OBJECT-TYPE
Allowed signing algorithm for the OCSP response [all, md5, sha1, sha256, sha384, sha512].
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.8DisplayStringread-createcurrent
slbNewSslCfgAuthPolValidityVchain
OBJECT-TYPE
Enable/Disable validating every CA certificate in the CA chain u.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolValiditySecure
OBJECT-TYPE
Enable/Disable secure OCSP response by sending random nonce with.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoVersionName
OBJECT-TYPE
Certificate version header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.11DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoVersionFlag
OBJECT-TYPE
Pass certificate version information to backend server?.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoSerialName
OBJECT-TYPE
Certificate serial-number header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.13DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoSerialFlag
OBJECT-TYPE
Pass certificate serial-number to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoAlgoName
OBJECT-TYPE
Certificate signature algorithm header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.15DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoAlgoFlag
OBJECT-TYPE
Pass certificate Signature Algorithm to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoIssuerName
OBJECT-TYPE
Certificate issuer header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.17DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoIssuerFlag
OBJECT-TYPE
Pass certificate issuer information to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoNbeforeName
OBJECT-TYPE
Certificate 'Not Before Validity Dates' header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.19DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoNbeforeFlag
OBJECT-TYPE
Pass certificate 'Not Before' Validity Date to backend serverr?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoNafterName
OBJECT-TYPE
Certificate 'Not After Validity Dates' header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.21DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoNafterFlag
OBJECT-TYPE
Pass certificate 'Not After' Validity Date to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.22INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoSubjectName
OBJECT-TYPE
Certificate subject header name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.23DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoSubjectFlag
OBJECT-TYPE
Pass certificate subject to backend server?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.24INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoKeytypeName
OBJECT-TYPE
Certificate Public Key Type header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.25DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoKeytypeFlag
OBJECT-TYPE
Pass certificate Public Key Type information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.26INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoMd5Name
OBJECT-TYPE
Certificate MD5 Hash header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.27DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoMd5Flag
OBJECT-TYPE
Pass certificate MD5 Hash information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.28INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoCertName
OBJECT-TYPE
Certificate header.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.29DisplayStringread-createcurrent
slbNewSslCfgAuthPolPassinfoCertFormat
OBJECT-TYPE
Certificate Header Lines Format.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.30INTEGERread-createcurrent
slbNewSslCfgAuthPolPassinfoCertFlag
OBJECT-TYPE
Pass certificate information to backend servers?
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.31INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoCharset
OBJECT-TYPE
Set the character set to be used for information.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.32INTEGERread-createcurrent
slbNewSslCfgAuthPolTrustcaChainName
OBJECT-TYPE
Trusted client's CA certificate name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.33DisplayStringread-createcurrent
slbNewSslCfgAuthPolTrustcaChainType
OBJECT-TYPE
Trusted client's CA certificate type certificate=cert,Group=group,None=<empty string>.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.34DisplayStringread-createcurrent
slbNewSslCfgAuthPolCadepth
OBJECT-TYPE
Maximum depth to search the trusted CA in the CA certificate.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.35INTEGERread-createcurrent
slbNewSslCfgAuthPolCaverify
OBJECT-TYPE
Certificate's CA verification level.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.36INTEGERread-createcurrent
slbNewSslCfgAuthPolFailurl
OBJECT-TYPE
URL for redirection when client authentication fails
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.37DisplayStringread-createcurrent
slbNewSslCfgAuthPolAdminStatus
OBJECT-TYPE
Enable or disable Auth policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.38INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewSslCfgAuthPolDelete
OBJECT-TYPE
Delete Client Authentication Policy.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.39INTEGER {other(1), delete(2)}read-createcurrent
slbNewSslCfgAuthPolPassinfoComp2424
OBJECT-TYPE
Enable/Disable the 2424SSL Headers Compliance Mode.
1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
certs
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.19.5
slbCurSslCfgCertsTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1not-accessiblecurrent
slbCurSslCfgCertsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1not-accessiblecurrent
slbCurSslCfgCertsID
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbCurSslCfgCertsType
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.2INTEGER {key(1), certificateRequest(2), serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)}read-onlycurrent
slbCurSslCfgCertsName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.3DisplayString (SIZE(0..32))read-onlycurrent
slbCurSslCfgCertsKeySize
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.4INTEGER {ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6)}read-onlycurrent
slbCurSslCfgCertsExpirty
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.5DisplayStringread-onlycurrent
slbCurSslCfgCertsCommonName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.6DisplayString (SIZE(0..85))read-onlycurrent
slbCurSslCfgCertsHashAlgo
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.7INTEGER {md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6)}read-onlycurrent
slbCurSslCfgCertsCountryName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.8DisplayString (SIZE(0..85))read-onlycurrent
slbCurSslCfgCertsPrpvinceName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.9DisplayString (SIZE(0..149))read-onlycurrent
slbCurSslCfgCertsLocalityName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.10DisplayString (SIZE(0..149))read-onlycurrent
slbCurSslCfgCertsOrganizationName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.11DisplayString (SIZE(0..85))read-onlycurrent
slbCurSslCfgCertsOrganizationUnitName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.12DisplayString (SIZE(0..85))read-onlycurrent
slbCurSslCfgCertsEMail
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.13DisplayString (SIZE(0..149))read-onlycurrent
slbCurSslCfgCertsValidityPeriod
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.14INTEGER (1..3650)read-onlycurrent
slbCurSslCfgCertsStatus
OBJECT-TYPE
Shows if the current certificate is generated.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.15INTEGER {generated(1), notGenerated(2)}read-onlycurrent
slbNewSslCfgCertsTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2not-accessiblecurrent
slbNewSslCfgCertsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1not-accessiblecurrent
slbNewSslCfgCertsID
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbNewSslCfgCertsType
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.2INTEGER {key(1), certificateRequest(2), serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)}read-onlycurrent
slbNewSslCfgCertsName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.3DisplayString (SIZE(0..32))read-writecurrent
slbNewSslCfgCertsKeySize
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.4INTEGER {ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6)}read-createcurrent
slbNewSslCfgCertsExpirty
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.5DisplayStringread-onlycurrent
slbNewSslCfgCertsCommonName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.6DisplayString (SIZE(0..85))read-createcurrent
slbNewSslCfgCertsHashAlgo
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.7INTEGER {md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6)}read-createcurrent
slbNewSslCfgCertsCountryName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.8DisplayString (SIZE(0..85))read-createcurrent
slbNewSslCfgCertsPrpvinceName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.9DisplayString (SIZE(0..149))read-createcurrent
slbNewSslCfgCertsLocalityName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.10DisplayString (SIZE(0..149))read-createcurrent
slbNewSslCfgCertsOrganizationName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.11DisplayString (SIZE(0..85))read-createcurrent
slbNewSslCfgCertsOrganizationUnitName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.12DisplayString (SIZE(0..85))read-createcurrent
slbNewSslCfgCertsEMail
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.13DisplayString (SIZE(0..149))read-createcurrent
slbNewSslCfgCertsValidityPeriod
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.14INTEGER (1..3650)read-createcurrent
slbNewSslCfgCertsDelete
OBJECT-TYPE
Delete certificate.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.15INTEGER {other(1), delete(2)}read-writecurrent
slbNewSslCfgCertsGenerate
OBJECT-TYPE
By setting the value to generate(2), the Certicicate will be generated.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.16INTEGER {other(1), generate(2)}read-writecurrent
slbNewSslCfgCertsStatus
OBJECT-TYPE
Shows if the current certificate is generated.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.17INTEGER {generated(1), notGenerated(2), inProgress(3)}read-onlycurrent
slbSslCfgCertsDefaults
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3
slbCurSslCfgCertsDefaultsCountryName
OBJECT-TYPE
SSL certificate Country Name in 2 letter code.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.1DisplayString (SIZE(2))read-onlycurrent
slbNewSslCfgCertsDefaultsCountryName
OBJECT-TYPE
SSL certificate Country Name in 2 letter code.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.2DisplayString (SIZE(2))read-writecurrent
slbCurSslCfgCertsDefaultsProvinceName
OBJECT-TYPE
SSL Certificate State or Province Name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.3DisplayString (SIZE(0..149))read-onlycurrent
slbNewSslCfgCertsDefaultsProvinceName
OBJECT-TYPE
SSL Certificate State or Province Name.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.4DisplayString (SIZE(0..149))read-writecurrent
slbCurSslCfgCertsDefaultsLocallyName
OBJECT-TYPE
SSL certificate locality name (e.g. city).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.5DisplayString (SIZE(0..149))read-onlycurrent
slbNewSslCfgCertsDefaultsLocallyName
OBJECT-TYPE
SSL certificate locality name (e.g. city).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.6DisplayString (SIZE(0..149))read-writecurrent
slbCurSslCfgCertsDefaultsOrganizationName
OBJECT-TYPE
SSL certificate Organization Name (e.g. company).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.7DisplayString (SIZE(0..85))read-onlycurrent
slbNewSslCfgCertsDefaultsOrganizationName
OBJECT-TYPE
SSL certificate Organization Name (e.g. company).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.8DisplayString (SIZE(0..85))read-writecurrent
slbCurSslCfgCertsDefaultsOrganizationUnitName
OBJECT-TYPE
SSL certificate Organizational Unit Name (e.g. accounting).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.9DisplayString (SIZE(0..85))read-onlycurrent
slbNewSslCfgCertsDefaultsOrganizationUnitName
OBJECT-TYPE
SSL certificate Organizational Unit Name (e.g. accounting).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.10DisplayString (SIZE(0..85))read-writecurrent
slbCurSslCfgCertsDefaultsEMail
OBJECT-TYPE
SSL certificate Email (e.g. admin@company.com).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.11DisplayString (SIZE(0..149))read-onlycurrent
slbNewSslCfgCertsDefaultsEMail
OBJECT-TYPE
SSL certificate Email (e.g. admin@company.com).
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.12DisplayString (SIZE(0..149))read-writecurrent
slbCurSslCfgGroupsTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4not-accessiblecurrent
slbCurSslCfgGroupsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1not-accessiblecurrent
slbCurSslCfgGroupsID
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbCurSslCfgGroupsName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.2DisplayString (SIZE(0..32))read-onlycurrent
slbCurSslCfgGroupsType
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.3INTEGER {serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)}read-onlycurrent
slbCurSslCfgGroupsDefaultCert
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.4DisplayString (SIZE(0..32))read-onlycurrent
slbCurSslCfgGroupsCertBmap
OBJECT-TYPE
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.5OCTET STRINGread-onlycurrent
slbNewSslCfgGroupsTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5not-accessiblecurrent
slbNewSslCfgGroupsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1not-accessiblecurrent
slbNewSslCfgGroupsID
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbNewSslCfgGroupsName
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.2DisplayString (SIZE(0..32))read-writecurrent
slbNewSslCfgGroupsType
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.3INTEGER {serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)}read-writecurrent
slbNewSslCfgGroupsDelete
OBJECT-TYPE
Delete certificate group.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.4INTEGER {other(1), delete(2)}read-writecurrent
slbNewSslCfgGroupsDefaultCert
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.5DisplayString (SIZE(0..32))read-writecurrent
slbNewSslCfgGroupsAddCert
OBJECT-TYPE
Add cerificate to the group
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.6DisplayString (SIZE(0..32))read-writecurrent
slbNewSslCfgGroupsRemCert
OBJECT-TYPE
Remove cerificate from the group
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.7DisplayString (SIZE(0..32))read-writecurrent
slbNewSslCfgGroupsCertBmap
OBJECT-TYPE
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.8OCTET STRINGread-onlycurrent
sapCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.20
slbSapAslrTableMaxSize
OBJECT-TYPE
The maximum number of entries in SAP ASLR connection management table.
1.3.6.1.4.1.1872.2.5.4.1.1.20.1Integer32read-onlycurrent
slbCurCfgSapAslrTable
OBJECT-TYPE
The SAP ASLR connection management table.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2not-accessiblecurrent
slbCurCfgSapAslrEntry
OBJECT-TYPE
A row in the SAP ASLR connection management table.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1not-accessiblecurrent
slbCurCfgSapAslrIndex
OBJECT-TYPE
The Sap Aslr number
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.1Integer32read-onlycurrent
slbCurCfgSapAslrIpAddr
OBJECT-TYPE
IP address of the Sap Aslr identified by the instance of the slbCurCfgSapAslrIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.2IpAddressread-onlycurrent
slbCurCfgSapAslrIpv6Addr
OBJECT-TYPE
IPV6 address of the Sap Aslr manager identified by the instance of the slbCurCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.3DisplayString (SIZE(0..40))read-onlycurrent
slbCurCfgSapAslrIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.4INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
slbCurCfgSapAslrPortNum
OBJECT-TYPE
The Sap Aslr service port number.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.5INTEGER (2..65534)read-onlycurrent
slbCurCfgSapAslrVipAddr
OBJECT-TYPE
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.6IpAddressread-onlycurrent
slbCurCfgSapAslrVipv6Addr
OBJECT-TYPE
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.7DisplayString (SIZE(0..40))read-onlycurrent
slbCurCfgSapAslrVipIpVer
OBJECT-TYPE
The type of VIP IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.8INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
slbCurCfgSapAslrInterval
OBJECT-TYPE
Set the Sap Aslr server inspection interval.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.9INTEGER (1..60)read-onlycurrent
slbCurCfgSapAslrState
OBJECT-TYPE
Enable or disable the Sap Aslr server sampling.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbCurCfgSapAslrName
OBJECT-TYPE
The name of the Sap Aslr connection.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.11DisplayString (SIZE(0..31))read-onlycurrent
slbCurCfgSapAslrLastAct
OBJECT-TYPE
The Sap Aslr connection last activity time stamp.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.12DisplayString (SIZE(0..31))read-onlycurrent
slbCurCfgSapAslrAutoConfig
OBJECT-TYPE
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2)
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.13INTEGER {basic(1), full(2)}read-createcurrent
slbCurCfgSapAslrSessionInfo
OBJECT-TYPE
Set the Sap Aslr session information. When read, zero is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.14INTEGERread-onlycurrent
slbCurCfgSapAslrDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.15INTEGER {other(1), delete(2)}read-onlycurrent
slbCurCfgSapAslrSignature
OBJECT-TYPE
The Sap Aslr connection signature.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.16DisplayString (SIZE(0..40))read-onlycurrent
slbCurCfgSapAslrServCert
OBJECT-TYPE
Server Certificate name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.17DisplayString (SIZE(0..32))read-createcurrent
slbNewCfgSapAslrTable
OBJECT-TYPE
The SAP ASLR connection management table.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3not-accessiblecurrent
slbNewCfgSapAslrEntry
OBJECT-TYPE
A row in the SAP ASLR connection management table.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1not-accessiblecurrent
slbNewCfgSapAslrIndex
OBJECT-TYPE
The Sap Aslr number
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.1Integer32read-createcurrent
slbNewCfgSapAslrIpAddr
OBJECT-TYPE
IP address of the Sap Aslr identified by the instance of the slbNewCfgSapAslrIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.2IpAddressread-createcurrent
slbNewCfgSapAslrIpv6Addr
OBJECT-TYPE
IPV6 address of the Sap Aslr manager identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.3DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgSapAslrIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.4INTEGER {ipv4(1), ipv6(2)}read-createcurrent
slbNewCfgSapAslrPortNum
OBJECT-TYPE
The Sap Aslr service port number.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.5INTEGER (2..65534)read-createcurrent
slbNewCfgSapAslrVipAddr
OBJECT-TYPE
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.6IpAddressread-createcurrent
slbNewCfgSapAslrVipv6Addr
OBJECT-TYPE
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.7DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgSapAslrVipIpVer
OBJECT-TYPE
The type of VIP IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.8INTEGER {ipv4(1), ipv6(2)}read-createcurrent
slbNewCfgSapAslrInterval
OBJECT-TYPE
Set the Sap Aslr server inspection interval.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.9INTEGER (4..60)read-createcurrent
slbNewCfgSapAslrState
OBJECT-TYPE
Enable or disable the Sap Aslr server sampling.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
slbNewCfgSapAslrName
OBJECT-TYPE
The name of the Sap Aslr connection.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.11DisplayString (SIZE(0..31))read-createcurrent
slbNewCfgSapAslrLastAct
OBJECT-TYPE
The Sap Aslr last activity time stamp.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.12DisplayString (SIZE(0..31))read-createcurrent
slbNewCfgSapAslrAutoConfig
OBJECT-TYPE
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2)
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.13INTEGER {basic(1), full(2)}read-createcurrent
slbNewCfgSapAslrSessionInfo
OBJECT-TYPE
Set the Sap Aslr session information. When read, zero is returned.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.14INTEGERread-createcurrent
slbNewCfgSapAslrDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.15INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgSapAslrSignature
OBJECT-TYPE
The Sap Aslr connection signature.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.16DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgSapAslrServCert
OBJECT-TYPE
Server Certificate name associated with this virtual service.
1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.17DisplayString (SIZE(0..32))read-createcurrent
peerpipTblCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.21
slbCurCfgPeerPIPTable
OBJECT-TYPE
The table of Peer PIP configuration in the current_config.
1.3.6.1.4.1.1872.2.5.4.1.1.21.1not-accessiblecurrent
slbCurCfgPeerPIPEntry
OBJECT-TYPE
Information about Peer PIP configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1not-accessiblecurrent
slbCurCfgPeerPIPIndex
OBJECT-TYPE
The index for peer PIP.
1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.1Integer32read-onlycurrent
slbCurCfgPeerPIPAddr
OBJECT-TYPE
The IP address of the peer PIP.
1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.2IpAddressread-onlycurrent
slbCurCfgPeerPIPv6Addr
OBJECT-TYPE
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.3DisplayString (SIZE(0..40))read-onlycurrent
slbNewCfgPeerPIPTable
OBJECT-TYPE
The table of Peer PIP configuration in the new_config.
1.3.6.1.4.1.1872.2.5.4.1.1.21.2not-accessiblecurrent
slbNewCfgPeerPIPEntry
OBJECT-TYPE
Information about Peer PIP configuration.
1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1not-accessiblecurrent
slbNewCfgPeerPIPIndex
OBJECT-TYPE
The index for peer PIP.
1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.1Integer32read-onlycurrent
slbNewCfgPeerPIPAddr
OBJECT-TYPE
The IP address of the peer PIP.
1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.2IpAddressread-createcurrent
slbNewCfgPeerPIPv6Addr
OBJECT-TYPE
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.3DisplayString (SIZE(0..40))read-createcurrent
slbNewCfgPeerPIPDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.4INTEGER {other(1), delete(2)}read-createcurrent
nwclssCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.1.22
slbCurNwclssCfgNetworkClassesTable
OBJECT-TYPE
Current network classes table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.1not-accessiblecurrent
slbCurNwclssCfgNetworkClassesEntry
OBJECT-TYPE
A row in the network classes table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1not-accessiblecurrent
slbCurNwclssCfgNetworkClassesId
OBJECT-TYPE
Network class id.
1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbCurNwclssCfgNetworkClassesName
OBJECT-TYPE
Network class name.
1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
slbCurNwclssCfgNetworkClassesIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.3INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
slbNewNwclssCfgNetworkClassesTable
OBJECT-TYPE
New network classes table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2not-accessiblecurrent
slbNewNwclssCfgNetworkClassesEntry
OBJECT-TYPE
A row in the new network classes table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1not-accessiblecurrent
slbNewNwclssCfgNetworkClassesId
OBJECT-TYPE
Network class id.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbNewNwclssCfgNetworkClassesName
OBJECT-TYPE
Network class name.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.2DisplayString (SIZE(0..32))read-createcurrent
slbNewNwclssCfgNetworkClassesIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.3INTEGER {ipv4(1), ipv6(2)}read-createcurrent
slbNewNwclssCfgNetworkClassesDel
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewNwclssCfgNetworkClassesCopy
OBJECT-TYPE
Duplicating an entire Network class by defining the destination Network class id.
1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.5DisplayString (SIZE(0..32))read-createcurrent
slbCurNwclssCfgNetworkElementsTable
OBJECT-TYPE
Current network elements table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3not-accessiblecurrent
slbCurNwclssCfgNetworkElementsEntry
OBJECT-TYPE
A row in the network elements table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1not-accessiblecurrent
slbCurNwclssCfgNetworkElementsNcId
OBJECT-TYPE
Id of network class which owns network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbCurNwclssCfgNetworkElementsId
OBJECT-TYPE
Network element id.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.2DisplayString (SIZE(0..32))read-onlycurrent
slbCurNwclssCfgNetworkElementsNetType
OBJECT-TYPE
The type of network.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.3INTEGER {subnet(1), range(2)}read-onlycurrent
slbCurNwclssCfgNetworkElementsIp
OBJECT-TYPE
IPv4 address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.4IpAddressread-onlycurrent
slbCurNwclssCfgNetworkElementsMask
OBJECT-TYPE
Subnet mask of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.5IpAddressread-onlycurrent
slbCurNwclssCfgNetworkElementsFromIp
OBJECT-TYPE
From IP address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.6IpAddressread-onlycurrent
slbCurNwclssCfgNetworkElementsToIp
OBJECT-TYPE
To IP address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.7IpAddressread-onlycurrent
slbCurNwclssCfgNetworkElementsIpv6Addr
OBJECT-TYPE
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.8DisplayString (SIZE(0..40))read-onlycurrent
slbCurNwclssCfgNetworkElementsPrefixLen
OBJECT-TYPE
The prefix length associated with the network IP address .
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.9INTEGER (1..128)read-onlycurrent
slbCurNwclssCfgNetworkElementsFromIpv6Addr
OBJECT-TYPE
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.10DisplayString (SIZE(0..40))read-onlycurrent
slbCurNwclssCfgNetworkElementsToIpv6Addr
OBJECT-TYPE
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.11DisplayString (SIZE(0..40))read-onlycurrent
slbCurNwclssCfgNetworkElementsMatchType
OBJECT-TYPE
The match type of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.12INTEGER {include(1), exclude(2)}read-onlycurrent
slbNewNwclssCfgNetworkElementsTable
OBJECT-TYPE
New network elements table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4not-accessiblecurrent
slbNewNwclssCfgNetworkElementsEntry
OBJECT-TYPE
A row in the new network elements table.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1not-accessiblecurrent
slbNewNwclssCfgNetworkElementsNcId
OBJECT-TYPE
ID of network class which owns network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.1DisplayString (SIZE(0..32))read-onlycurrent
slbNewNwclssCfgNetworkElementsId
OBJECT-TYPE
Network class ID.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.2DisplayString (SIZE(0..32))read-onlycurrent
slbNewNwclssCfgNetworkElementsNetType
OBJECT-TYPE
The type of network.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.3INTEGER {subnet(1), range(2)}read-createcurrent
slbNewNwclssCfgNetworkElementsIp
OBJECT-TYPE
IP address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.4IpAddressread-createcurrent
slbNewNwclssCfgNetworkElementsMask
OBJECT-TYPE
Subnet mask of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.5IpAddressread-createcurrent
slbNewNwclssCfgNetworkElementsFromIp
OBJECT-TYPE
From IP address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.6IpAddressread-createcurrent
slbNewNwclssCfgNetworkElementsToIp
OBJECT-TYPE
To IP address of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.7IpAddressread-createcurrent
slbNewNwclssCfgNetworkElementsIpv6Addr
OBJECT-TYPE
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.8DisplayString (SIZE(0..40))read-createcurrent
slbNewNwclssCfgNetworkElementsPrefixLen
OBJECT-TYPE
The prefix length associated with the network IP address .
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.9INTEGER (1..128)read-createcurrent
slbNewNwclssCfgNetworkElementsFromIpv6Addr
OBJECT-TYPE
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.10DisplayString (SIZE(0..40))read-createcurrent
slbNewNwclssCfgNetworkElementsToIpv6Addr
OBJECT-TYPE
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.11DisplayString (SIZE(0..40))read-createcurrent
slbNewNwclssCfgNetworkElementsMatchType
OBJECT-TYPE
The match type of network element.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.12INTEGER {include(1), exclude(2)}read-createcurrent
slbNewNwclssCfgNetworkElementsDel
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.13INTEGER {other(1), delete(2)}read-createcurrent
filterCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.2
fltCfgTableMaxSize
OBJECT-TYPE
The maximum number of filtering table entries.
1.3.6.1.4.1.1872.2.5.4.1.2.1Integer32read-onlycurrent
fltCurCfgTable
OBJECT-TYPE
The filtering table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.2.2not-accessiblecurrent
fltCurCfgTableEntry
OBJECT-TYPE
A row in the filtering table.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1not-accessiblecurrent
fltCurCfgIndx
OBJECT-TYPE
The filtering table index.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.1Integer32read-onlycurrent
fltCurCfgSrcIp
OBJECT-TYPE
The source IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.2IpAddressread-onlycurrent
fltCurCfgSrcIpMask
OBJECT-TYPE
The source IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.3IpAddressread-onlycurrent
fltCurCfgDstIp
OBJECT-TYPE
The destination IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.4IpAddressread-onlycurrent
fltCurCfgDstIpMask
OBJECT-TYPE
The destination IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.5IpAddressread-onlycurrent
fltCurCfgProtocol
OBJECT-TYPE
The protocol to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.6INTEGER (0..255)read-onlycurrent
fltCurCfgRangeHighSrcPort
OBJECT-TYPE
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.7INTEGER (0..65534)read-onlycurrent
fltCurCfgRangeLowSrcPort
OBJECT-TYPE
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.8INTEGER (0..65534)read-onlycurrent
fltCurCfgRangeLowDstPort
OBJECT-TYPE
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.9INTEGER (0..65534)read-onlycurrent
fltCurCfgRangeHighDstPort
OBJECT-TYPE
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.10INTEGER (0..65534)read-onlycurrent
fltCurCfgAction
OBJECT-TYPE
The action for the filtering rule.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.11INTEGER {allow(1), deny(2), redirect(3), nat(4), goto(5)}read-onlycurrent
fltCurCfgRedirPort
OBJECT-TYPE
The real server port number used for redirection.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.12INTEGER (0..65534)read-onlycurrent
fltCurCfgRedirGroup
OBJECT-TYPE
The real server group to be redirected to.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.13Integer32read-onlycurrent
fltCurCfgLog
OBJECT-TYPE
Enable or disable logging.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgState
OBJECT-TYPE
The state of this filtering rule.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgNat
OBJECT-TYPE
The selection of destination or source or multicast for network address translation.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16INTEGER {destination-address(1), source-address(2), multicast-address(3)}read-onlycurrent
fltCurCfgCache
OBJECT-TYPE
Enable or disable caching sessions that match filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgInvert
OBJECT-TYPE
Turn the invert logic on or off for the filter entry.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.18INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgClientProxy
OBJECT-TYPE
Enable or disable client proxy.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.19INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgTcpAck
OBJECT-TYPE
Enable or disable filtering on matching TCP ACK and RST flag.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.20INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgSrcMac
OBJECT-TYPE
The source MAC address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.22PhysAddressread-onlycurrent
fltCurCfgDstMac
OBJECT-TYPE
The Destination MAC address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.23PhysAddressread-onlycurrent
fltCurCfgFtpNatActive
OBJECT-TYPE
Enable or disable FTP NAT for active ftp only.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.24INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgAclTcpUrg
OBJECT-TYPE
Enable or disable TCP URG packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.25INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclTcpAck
OBJECT-TYPE
Enable or disable TCP ACK packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.26INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclTcpPsh
OBJECT-TYPE
Enable or disable TCP PSH packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.27INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclTcpRst
OBJECT-TYPE
Enable or disable TCP RST packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.28INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclTcpSyn
OBJECT-TYPE
Enable or disable TCP SYN packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.29INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclTcpFin
OBJECT-TYPE
Enable or disable TCP FIN packet.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.30INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgAclIcmp
OBJECT-TYPE
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.31INTEGER (0..255)read-onlycurrent
fltCurCfgAclIpOption
OBJECT-TYPE
Enable or disable IP option matching.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.32INTEGER {enable(1), disable(2)}read-onlycurrent
fltCurCfgBwmContract
OBJECT-TYPE
Filt default BW contract number.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.33Integer32read-onlycurrent
fltCurCfgAclIpTos
OBJECT-TYPE
The IP TOS value to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.34INTEGER (0..255)read-onlycurrent
fltCurCfgAclIpTosMask
OBJECT-TYPE
The IP TOS mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.35INTEGER (0..255)read-onlycurrent
fltCurCfgAclIpTosNew
OBJECT-TYPE
The new IP TOS value to over-write when filtering fired.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.36INTEGER (0..255)read-onlycurrent
fltCurCfgFwlb
OBJECT-TYPE
Enable or disable filtering on firewall redirect hash method.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.37INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgNatTimeout
OBJECT-TYPE
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.38INTEGER (4..32768)read-onlycurrent
fltCurCfgLinklb
OBJECT-TYPE
Enable or disable WAN link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.39INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgWapRadiusSnoop
OBJECT-TYPE
Enable or disable WAP RADIUS snooping.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.40INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgSrcIpMac
OBJECT-TYPE
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.41INTEGER {ip(1), mac(2)}read-onlycurrent
fltCurCfgDstIpMac
OBJECT-TYPE
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.42INTEGER {ip(1), mac(2)}read-onlycurrent
fltCurCfgIdslbHash
OBJECT-TYPE
Set hash parameter for intrusion detection server load balancing.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.43INTEGER {sip(1), dip(2), both(3)}read-onlycurrent
fltCurCfgVlan
OBJECT-TYPE
Set the VLAN assoicated with the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.44INTEGER (0..4090)read-onlycurrent
fltCurCfgName
OBJECT-TYPE
The name of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.45DisplayString (SIZE(0..31))read-onlycurrent
fltCurCfgTcpRateLimit
OBJECT-TYPE
Enable or disable protocol rate limiting.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.46INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgTcpRateMaxConn
OBJECT-TYPE
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47INTEGER (0..255)read-onlycurrent
fltCurCfgHash
OBJECT-TYPE
Set hash parameter for the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.48INTEGER {auto(1), sip(2), dip(3), both(4), sipsport(5)}read-onlycurrent
fltCurCfgLayer7DenyState
OBJECT-TYPE
Enable or disable layer 7 deny filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.50INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgLayer7DenyUrlBmap
OBJECT-TYPE
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.51OCTET STRINGread-onlycurrent
fltCurCfgGotoFilter
OBJECT-TYPE
The filter ID for GOTO action in the current config.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.52Integer32read-onlycurrent
fltCurCfgRadiusWapPersist
OBJECT-TYPE
Enable or disable Radius/WAP persistence.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.53INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgPbind
OBJECT-TYPE
Enable or disable filter persistent binding.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.54INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgTimeWindow
OBJECT-TYPE
The time window for protocol rate limiting (in seconds).
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.55INTEGER (1..65535)read-onlycurrent
fltCurCfgHoldDuration
OBJECT-TYPE
The hold down duration for protocol rate limiting (in minutes).
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.56INTEGER (2..65535)read-onlycurrent
fltCurCfgPatternMatch
OBJECT-TYPE
Enable or disable binary pattern matching.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.57INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgLayer7DenyMatchAll
OBJECT-TYPE
Enable or disable match-all criteria for L7 deny string matching.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.58INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgProxyIp
OBJECT-TYPE
The client proxy IP address for NAT and REDIR filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.59IpAddressread-onlycurrent
fltCurCfgLayer7ParseAll
OBJECT-TYPE
Enable or disable layer 7 lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.60INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgSecurityParseAll
OBJECT-TYPE
Enable or disable pattern string lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.61INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgPatternMatchGroupBmap
OBJECT-TYPE
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.62OCTET STRINGread-onlycurrent
fltCurCfg8021pBitsValue
OBJECT-TYPE
The 802.1p bits value to match.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.63INTEGER (0..7)read-onlycurrent
fltCurCfg8021pBitsMatch
OBJECT-TYPE
Enable or disable matching on 802.1p bits in the packets.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.64INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgAclIpLength
OBJECT-TYPE
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.65INTEGER (0..65535)read-onlycurrent
fltCurCfgIdsGroup
OBJECT-TYPE
The real server group for IDS load balancing. A value of 0 indicates 'none'.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.66Integer32read-onlycurrent
fltCurCfgEgressPip
OBJECT-TYPE
Enable or disable pip selection based on egress port/vlan.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.67INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgDbind
OBJECT-TYPE
Enable or disable filter delayed binding.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.68INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgRevBwmContract
OBJECT-TYPE
Filt reverse session BWM contract number.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.69Integer32read-onlycurrent
fltCurCfgReverse
OBJECT-TYPE
Enable or disable creating session for reverse side traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.70INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgParseChn
OBJECT-TYPE
Enable or disable chained pgroup match criteria for l7 filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.71INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgRtpBwmContract
OBJECT-TYPE
BWM contract for SIP RTP traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.72Integer32read-onlycurrent
fltCurCfgSipParsing
OBJECT-TYPE
Enable or disable SIP NAT.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.73INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgSessionMirror
OBJECT-TYPE
Enable or disable session mirroring.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.74INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.75INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
fltCurCfgIpv6Sip
OBJECT-TYPE
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.76DisplayString (SIZE(0..40))read-onlycurrent
fltCurCfgIpv6Sprefix
OBJECT-TYPE
The prefix length associated with source IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.77INTEGER (0..128)read-onlycurrent
fltCurCfgIpv6Dip
OBJECT-TYPE
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.78DisplayString (SIZE(0..40))read-onlycurrent
fltCurCfgIpv6Dprefix
OBJECT-TYPE
The prefix length associated with destination IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.79INTEGER (0..128)read-onlycurrent
fltCurCfgHdrHash
OBJECT-TYPE
The header hash filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.80INTEGER {none(1), headerhash(2)}read-onlycurrent
fltCurCfgHdrName
OBJECT-TYPE
The header name of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.81DisplayString (SIZE(0..31))read-onlycurrent
fltCurCfgHdrHashLen
OBJECT-TYPE
The header hash length of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.82INTEGER (0..255)read-onlycurrent
fltCurCfgL3Filter
OBJECT-TYPE
The L3 filter processing state for this filter.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.83INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgNatIp
OBJECT-TYPE
The nat IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.84IpAddressread-onlycurrent
fltCurCfgIpv6Nip
OBJECT-TYPE
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.85DisplayString (SIZE(0..40))read-onlycurrent
fltCurCfgIpv6Proxy
OBJECT-TYPE
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.86DisplayString (SIZE(0..40))read-onlycurrent
fltCurCfgL7SipFilt
OBJECT-TYPE
Enable/Disable L7 application SIP UDP filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.87INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgNatMcastVlan
OBJECT-TYPE
Multicast VLAN.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.88INTEGER (0..4090)read-onlycurrent
fltCurCfgNbind
OBJECT-TYPE
Enable or disable subnet binding for redirection.
1.3.6.1.4.1.1872.2.5.4.1.2.2.1.89INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltNewCfgTable
OBJECT-TYPE
The filtering table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.2.3not-accessiblecurrent
fltNewCfgTableEntry
OBJECT-TYPE
A row in the filtering table.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1not-accessiblecurrent
fltNewCfgIndx
OBJECT-TYPE
The filtering table index.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.1Integer32read-onlycurrent
fltNewCfgSrcIp
OBJECT-TYPE
The source IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.2IpAddressread-createcurrent
fltNewCfgSrcIpMask
OBJECT-TYPE
The source IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.3IpAddressread-createcurrent
fltNewCfgDstIp
OBJECT-TYPE
The destination IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.4IpAddressread-createcurrent
fltNewCfgDstIpMask
OBJECT-TYPE
The destination IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.5IpAddressread-createcurrent
fltNewCfgProtocol
OBJECT-TYPE
The protocol to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.6INTEGER (0..255)read-createcurrent
fltNewCfgRangeHighSrcPort
OBJECT-TYPE
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.7INTEGER (0..65534)read-createcurrent
fltNewCfgRangeLowSrcPort
OBJECT-TYPE
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.8INTEGER (0..65534)read-createcurrent
fltNewCfgRangeLowDstPort
OBJECT-TYPE
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.9INTEGER (0..65534)read-createcurrent
fltNewCfgRangeHighDstPort
OBJECT-TYPE
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.10INTEGER (0..65534)read-createcurrent
fltNewCfgAction
OBJECT-TYPE
The action for the filtering rule.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.11INTEGER {allow(1), deny(2), redirect(3), nat(4), goto(5)}read-createcurrent
fltNewCfgRedirPort
OBJECT-TYPE
The real server port number used for redirection.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.12INTEGER (0..65534)read-createcurrent
fltNewCfgRedirGroup
OBJECT-TYPE
The real server group to be redirected to.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.13Integer32read-createcurrent
fltNewCfgLog
OBJECT-TYPE
Enable or disable logging.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgState
OBJECT-TYPE
The state of this filtering rule.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.15INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.16INTEGER {other(1), delete(2)}read-createcurrent
fltNewCfgNat
OBJECT-TYPE
The selection of destination or source or multicast for network address translation.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.17INTEGER {destination-address(1), source-address(2), multicast-address(3)}read-createcurrent
fltNewCfgCache
OBJECT-TYPE
Enable or disable caching sessions that match filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgInvert
OBJECT-TYPE
Turn the invert logic on or off for the filter entry.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgClientProxy
OBJECT-TYPE
Enable or disable client proxy.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgTcpAck
OBJECT-TYPE
Enable or disable filtering on matching TCP ACK and RST flag.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.21INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgSrcMac
OBJECT-TYPE
The source MAC address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.23PhysAddressread-createcurrent
fltNewCfgDstMac
OBJECT-TYPE
The Destination MAC address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.24PhysAddressread-createcurrent
fltNewCfgFtpNatActive
OBJECT-TYPE
Enable or disable FTP NAT for active ftp.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.25INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgAclTcpUrg
OBJECT-TYPE
Enable or disable TCP URG packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.26INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclTcpAck
OBJECT-TYPE
Enable or disable TCP ACK packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.27INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclTcpPsh
OBJECT-TYPE
Enable or disable TCP PSH packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.28INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclTcpRst
OBJECT-TYPE
Enable or disable TCP RST packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.29INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclTcpSyn
OBJECT-TYPE
Enable or disable TCP SYN packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.30INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclTcpFin
OBJECT-TYPE
Enable or disable TCP FIN packet.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.31INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgAclIcmp
OBJECT-TYPE
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.32INTEGER (0..255)read-createcurrent
fltNewCfgAclIpOption
OBJECT-TYPE
Enable or disable IP option matching.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.33INTEGER {enable(1), disable(2)}read-createcurrent
fltNewCfgBwmContract
OBJECT-TYPE
Filt default BW contract number.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.34Integer32read-createcurrent
fltNewCfgAclIpTos
OBJECT-TYPE
The IP TOS value to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.35INTEGER (0..255)read-createcurrent
fltNewCfgAclIpTosMask
OBJECT-TYPE
The IP TOS mask for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.36INTEGER (0..255)read-createcurrent
fltNewCfgAclIpTosNew
OBJECT-TYPE
The new IP TOS value to over-write when filtering fired.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.37INTEGER (0..255)read-createcurrent
fltNewCfgFwlb
OBJECT-TYPE
Enable or disable filtering on firewall redirect hash method.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.38INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgNatTimeout
OBJECT-TYPE
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.39INTEGER (4..32768)read-createcurrent
fltNewCfgLinklb
OBJECT-TYPE
Enable or disable WAN link load balancing.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgWapRadiusSnoop
OBJECT-TYPE
Enable or disable WAP RADIUS snooping.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.41INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgSrcIpMac
OBJECT-TYPE
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.42INTEGER {ip(1), mac(2)}read-createcurrent
fltNewCfgDstIpMac
OBJECT-TYPE
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.43INTEGER {ip(1), mac(2)}read-createcurrent
fltNewCfgIdslbHash
OBJECT-TYPE
Set hash parameter for intrusion detection server load balancing.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.44INTEGER {sip(1), dip(2), both(3)}read-createcurrent
fltNewCfgVlan
OBJECT-TYPE
Set the VLAN assoicated with the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.45INTEGER (0..4090)read-createcurrent
fltNewCfgName
OBJECT-TYPE
The name of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.46DisplayString (SIZE(0..31))read-createcurrent
fltNewCfgTcpRateLimit
OBJECT-TYPE
Enable or disable protocol rate limiting.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.47INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgTcpRateMaxConn
OBJECT-TYPE
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.48INTEGER (0..255)read-createcurrent
fltNewCfgHash
OBJECT-TYPE
Set hash parameter for the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.49INTEGER {auto(1), sip(2), dip(3), both(4), sipsport(5)}read-createcurrent
fltNewCfgLayer7DenyState
OBJECT-TYPE
Enable or disable layer 7 deny filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.51INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgLayer7DenyUrlBmap
OBJECT-TYPE
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.52OCTET STRINGread-onlycurrent
fltNewCfgLayer7DenyAddUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.53Integer32read-createcurrent
fltNewCfgLayer7DenyRemUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.54Integer32read-createcurrent
fltNewCfgGotoFilter
OBJECT-TYPE
The filter ID for GOTO action in the new config.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.55Integer32read-createcurrent
fltNewCfgRadiusWapPersist
OBJECT-TYPE
Enable or disable Radius/WAP persistence.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.56INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgPbind
OBJECT-TYPE
Enable or disable filter persistent binding.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.57INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgTimeWindow
OBJECT-TYPE
The time window for protocol rate limiting (in seconds).
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.58INTEGER (1..65535)read-createcurrent
fltNewCfgHoldDuration
OBJECT-TYPE
The hold down duration for protocol rate limiting (in minutes).
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.59INTEGER (2..65535)read-createcurrent
fltNewCfgPatternMatch
OBJECT-TYPE
Enable or disable binary pattern matching.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.60INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgLayer7DenyMatchAll
OBJECT-TYPE
Enable or disable match-all criteria for L7 deny string matching.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.61INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgProxyIp
OBJECT-TYPE
The client proxy IP address for NAT and REDIR filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.62IpAddressread-createcurrent
fltNewCfgLayer7ParseAll
OBJECT-TYPE
Enable or disable layer 7 lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.63INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgSecurityParseAll
OBJECT-TYPE
Enable or disable pattern string lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.64INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgPatternMatchGroupBmap
OBJECT-TYPE
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.65OCTET STRINGread-onlycurrent
fltNewCfgAddPatternMatchGroup
OBJECT-TYPE
The pattern match group to be added to the security filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.66Integer32read-createcurrent
fltNewCfgRemPatternMatchGroup
OBJECT-TYPE
The pattern match group to be to be removed from the security filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.67Integer32read-createcurrent
fltNewCfg8021pBitsValue
OBJECT-TYPE
The 802.1p bits value to match.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.68INTEGER (0..7)read-createcurrent
fltNewCfg8021pBitsMatch
OBJECT-TYPE
Enable or disable matching on 802.1p bits in the packets.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.69INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgAclIpLength
OBJECT-TYPE
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.70INTEGER (0..65535)read-createcurrent
fltNewCfgIdsGroup
OBJECT-TYPE
The real server group for IDS load balancing. A value of 0 indicates 'none'.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.71Integer32read-createcurrent
fltNewCfgEgressPip
OBJECT-TYPE
Enable or disable pip selection based on egress port/vlan.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.72INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgDbind
OBJECT-TYPE
Enable or disable filter delayed binding.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.73INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgRevBwmContract
OBJECT-TYPE
Filt reverse session BWM contract number.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.74Integer32read-createcurrent
fltNewCfgReverse
OBJECT-TYPE
Enable or disable creating session for reverse side traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.75INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgParseChn
OBJECT-TYPE
Enable or disable chained pgroup match criteria for l7 filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.76INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgRtpBwmContract
OBJECT-TYPE
BWM contract for SIP RTP traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.77Integer32read-createcurrent
fltNewCfgSipParsing
OBJECT-TYPE
Enable or disable SIP NAT.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.78INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgSessionMirror
OBJECT-TYPE
Enable or disable session mirroring.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.79INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.80INTEGER {ipv4(1), ipv6(2)}read-createcurrent
fltNewCfgIpv6Sip
OBJECT-TYPE
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.81DisplayString (SIZE(0..40))read-createcurrent
fltNewCfgIpv6Sprefix
OBJECT-TYPE
The prefix length associated with source IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.82INTEGER (0..128)read-createcurrent
fltNewCfgIpv6Dip
OBJECT-TYPE
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.83DisplayString (SIZE(0..40))read-createcurrent
fltNewCfgIpv6Dprefix
OBJECT-TYPE
The prefix length associated with destination IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.84INTEGER (0..128)read-createcurrent
fltNewCfgHdrHash
OBJECT-TYPE
The header hash filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.85INTEGER {none(1), headerhash(2)}read-createcurrent
fltNewCfgHdrName
OBJECT-TYPE
The header name of the filter. Headerhash should be enabled before header name is configured.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.86DisplayString (SIZE(0..31))read-createcurrent
fltNewCfgHdrHashLen
OBJECT-TYPE
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.87INTEGER (1..255)read-createcurrent
fltNewCfgL3Filter
OBJECT-TYPE
The L3 filter processing state for this filter.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.88INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgNatIp
OBJECT-TYPE
The nat IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.89IpAddressread-writecurrent
fltNewCfgIpv6Nip
OBJECT-TYPE
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.90DisplayString (SIZE(0..40))read-writecurrent
fltNewCfgIpv6Proxy
OBJECT-TYPE
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.91DisplayString (SIZE(0..40))read-writecurrent
fltNewCfgL7SipFilt
OBJECT-TYPE
Enable/Disable L7 application SIP UDP filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.92INTEGER {enabled(1), disabled(2)}read-writecurrent
fltNewCfgNatMcastVlan
OBJECT-TYPE
Multicast VLAN.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.93INTEGER (0..4090)read-writecurrent
fltNewCfgNbind
OBJECT-TYPE
Enable or disable subnet binding for redirection.
1.3.6.1.4.1.1872.2.5.4.1.2.3.1.94INTEGER {enabled(1), disabled(2)}read-createcurrent
fltCurCfgPortTable
OBJECT-TYPE
The filtering port table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.2.4not-accessiblecurrent
fltCurCfgPortTableEntry
OBJECT-TYPE
A row in the filtering port table.
1.3.6.1.4.1.1872.2.5.4.1.2.4.1not-accessiblecurrent
fltCurCfgPortIndx
OBJECT-TYPE
The port index.
1.3.6.1.4.1.1872.2.5.4.1.2.4.1.1Integer32read-onlycurrent
fltCurCfgPortState
OBJECT-TYPE
Enable or disable filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.4.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
fltCurCfgPortFiltBmap
OBJECT-TYPE
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
1.3.6.1.4.1.1872.2.5.4.1.2.4.1.3OCTET STRING (SIZE(0..256))read-onlycurrent
fltNewCfgPortTable
OBJECT-TYPE
The filtering port table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.2.5not-accessiblecurrent
fltNewCfgPortTableEntry
OBJECT-TYPE
A row in the filtering port table.
1.3.6.1.4.1.1872.2.5.4.1.2.5.1not-accessiblecurrent
fltNewCfgPortIndx
OBJECT-TYPE
The port index.
1.3.6.1.4.1.1872.2.5.4.1.2.5.1.1Integer32read-onlycurrent
fltNewCfgPortState
OBJECT-TYPE
Enable or disable filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.5.1.2INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgPortFiltBmap
OBJECT-TYPE
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
1.3.6.1.4.1.1872.2.5.4.1.2.5.1.3OCTET STRING (SIZE(0..256))read-createcurrent
fltNewCfgPortAddFiltRule
OBJECT-TYPE
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
1.3.6.1.4.1.1872.2.5.4.1.2.5.1.4Integer32read-createcurrent
fltNewCfgPortRemFiltRule
OBJECT-TYPE
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
1.3.6.1.4.1.1872.2.5.4.1.2.5.1.5Integer32read-createcurrent
fltUrlBwmTableMaxSize
OBJECT-TYPE
The maximum number of URL based BWM entries.
1.3.6.1.4.1.1872.2.5.4.1.2.6Integer32read-onlycurrent
fltCurCfgUrlBwmTable
OBJECT-TYPE
The table of URL based BWM for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.7not-accessiblecurrent
fltCurCfgUrlBwmEntry
OBJECT-TYPE
A row in the URL based BWM filtering table.
1.3.6.1.4.1.1872.2.5.4.1.2.7.1not-accessiblecurrent
fltCurCfgUrlBwmFltIndex
OBJECT-TYPE
The number of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.7.1.1Integer32read-onlycurrent
fltCurCfgUrlBwmUrlId
OBJECT-TYPE
The URL Path Identifier.
1.3.6.1.4.1.1872.2.5.4.1.2.7.1.2Integer32read-onlycurrent
fltCurCfgUrlBwmContract
OBJECT-TYPE
The BW contract.
1.3.6.1.4.1.1872.2.5.4.1.2.7.1.3Integer32read-onlycurrent
fltCurCfgUrlReverseBwmContract
OBJECT-TYPE
The BWM contract for reverse traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.7.1.4Integer32read-onlycurrent
fltNewCfgUrlBwmTable
OBJECT-TYPE
The table of URL based BWM for filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.8not-accessiblecurrent
fltNewCfgUrlBwmEntry
OBJECT-TYPE
A row in the URL based BWM filtering table.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1not-accessiblecurrent
fltNewCfgUrlBwmFltIndex
OBJECT-TYPE
The number of the filter.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1.1Integer32read-onlycurrent
fltNewCfgUrlBwmUrlId
OBJECT-TYPE
The URL Path Identifier.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1.2Integer32read-onlycurrent
fltNewCfgUrlBwmContract
OBJECT-TYPE
The BW traffic contract.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1.3Integer32read-createcurrent
fltNewCfgUrlBwmDelete
OBJECT-TYPE
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1.4INTEGER {other(1), delete(2)}read-createcurrent
fltNewCfgUrlReverseBwmContract
OBJECT-TYPE
The BWM contract for reverse traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.8.1.5Integer32read-createcurrent
fltCfgHttpRedirMappingTableMaxSize
OBJECT-TYPE
The maximum number of entries in HttpRedirMappingTable.
1.3.6.1.4.1.1872.2.5.4.1.2.9Integer32read-onlycurrent
fltCurCfgHttpRedirMappingTable
OBJECT-TYPE
The table of HTTP redirection mapping table.
1.3.6.1.4.1.1872.2.5.4.1.2.10not-accessiblecurrent
fltCurCfgHttpRedirMappingEntry
OBJECT-TYPE
A row in the HTTP redirect mapping table.
1.3.6.1.4.1.1872.2.5.4.1.2.10.1not-accessiblecurrent
fltCurCfgHttpRedirMappingFilter
OBJECT-TYPE
The filter number.
1.3.6.1.4.1.1872.2.5.4.1.2.10.1.1Integer32read-onlycurrent
fltCurCfgHttpRedirMappingFromStr
OBJECT-TYPE
This index is the string ID of Layer7 string table. If HTTP request matches this string, then switch issues a HTTP REDIRECT to client with the fltCurCfgHttpRedirMappingToStr string.
1.3.6.1.4.1.1872.2.5.4.1.2.10.1.2INTEGER (1..1024)read-onlycurrent
fltCurCfgHttpRedirMappingToStr
OBJECT-TYPE
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when HTTP request matches the fltCurCfgHttpRedirMappingFromStr string
1.3.6.1.4.1.1872.2.5.4.1.2.10.1.3INTEGER (2..1024)read-onlycurrent
fltNewCfgHttpRedirMappingTable
OBJECT-TYPE
The table of HTTP redirection mapping table.
1.3.6.1.4.1.1872.2.5.4.1.2.11not-accessiblecurrent
fltNewCfgHttpRedirMappingEntry
OBJECT-TYPE
A row in the HTTP redirect mapping table.
1.3.6.1.4.1.1872.2.5.4.1.2.11.1not-accessiblecurrent
fltNewCfgHttpRedirMappingFilter
OBJECT-TYPE
The filter number.
1.3.6.1.4.1.1872.2.5.4.1.2.11.1.1Integer32read-onlycurrent
fltNewCfgHttpRedirMappingFromStr
OBJECT-TYPE
The string ID of Layer7 string table. If HTTP request matches this string then switch issues a HTTP REDIRECT to client with the fltNewCfgHttpRedirMappingToStr string.
1.3.6.1.4.1.1872.2.5.4.1.2.11.1.2INTEGER (1..1024)read-onlycurrent
fltNewCfgHttpRedirMappingToStr
OBJECT-TYPE
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when the HTTP request matches fltNewCfgHttpRedirMappingFromStr string.
1.3.6.1.4.1.1872.2.5.4.1.2.11.1.4INTEGER (2..1024)read-createcurrent
fltNewCfgHttpRedirMappingDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.2.11.1.6INTEGER {other(1), delete(2)}read-createcurrent
fltNewCfgExtendedTable
OBJECT-TYPE
The filtering table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.2.12not-accessiblecurrent
fltNewCfgExtendedTableEntry
OBJECT-TYPE
A row in the filtering table.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1not-accessiblecurrent
fltNewCfgExtendedIndx
OBJECT-TYPE
The filtering table index.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.1Integer32read-onlycurrent
fltNewCfgExtendedLayer7DenyState
OBJECT-TYPE
Enable or disable layer 7 deny filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.3INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedLayer7DenyUrlBmap
OBJECT-TYPE
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.4OCTET STRINGread-onlycurrent
fltNewCfgExtendedLayer7DenyAddUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.5Integer32read-createcurrent
fltNewCfgExtendedLayer7DenyRemUrl
OBJECT-TYPE
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.6Integer32read-createcurrent
fltNewCfgExtendedGotoFilter
OBJECT-TYPE
The filter ID for GOTO action in the new config.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.7Integer32read-createcurrent
fltNewCfgExtendedRadiusWapPersist
OBJECT-TYPE
Enable or disable Radius/WAP persistence.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedPbind
OBJECT-TYPE
Enable or disable filter persistent binding.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedTimeWindow
OBJECT-TYPE
The time window for protocol rate limiting (in seconds).
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.10INTEGER (1..65535)read-createcurrent
fltNewCfgExtendedHoldDuration
OBJECT-TYPE
The hold down duration for protocol rate limiting (in minutes).
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.11INTEGER (2..65535)read-createcurrent
fltNewCfgExtendedPatternMatch
OBJECT-TYPE
Enable or disable binary pattern matching.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedLayer7DenyMatchAll
OBJECT-TYPE
Enable or disable match-all criteria for L7 deny string matching.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.13INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedProxyIp
OBJECT-TYPE
The client proxy IP address for NAT and REDIR filter.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.14IpAddressread-createcurrent
fltNewCfgExtendedLayer7ParseAll
OBJECT-TYPE
Enable or disable layer 7 lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.15INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedSecurityParseAll
OBJECT-TYPE
Enable or disable pattern string lookup (parsing) of all packets.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedPatternMatchGroupBmap
OBJECT-TYPE
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.17OCTET STRINGread-onlycurrent
fltNewCfgExtendedAddPatternMatchGroup
OBJECT-TYPE
The pattern match group to be added to the security filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.18Integer32read-createcurrent
fltNewCfgExtendedRemPatternMatchGroup
OBJECT-TYPE
The pattern match group to be to be removed from the security filter. A zero is returned when read.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.19Integer32read-createcurrent
fltNewCfgExtended8021pBitsValue
OBJECT-TYPE
The 802.1p bits value to match.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.20INTEGER (0..7)read-createcurrent
fltNewCfgExtended8021pBitsMatch
OBJECT-TYPE
Enable or disable matching on 802.1p bits in the packets.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.21INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedAclIpLength
OBJECT-TYPE
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.22INTEGER (0..65535)read-createcurrent
fltNewCfgExtendedIdsGroup
OBJECT-TYPE
The real server group for IDS load balancing. A value of 0 indicates 'none'.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.23Integer32read-createcurrent
fltNewCfgExtendedEgressPip
OBJECT-TYPE
Enable or disable pip selection based on egress port/vlan.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.24INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedDbind
OBJECT-TYPE
Enable or disable filter delayed binding.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.25INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedRevBwmContract
OBJECT-TYPE
Filt reverse session BWM contract number.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.26Integer32read-createcurrent
fltNewCfgExtendedReverse
OBJECT-TYPE
Enable or disable creating session for reverse side traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.27INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedParseChn
OBJECT-TYPE
Enable or disable chained pgroup match criteria for l7 filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.28INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedRtpBwmContract
OBJECT-TYPE
BWM contract for SIP RTP traffic.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.29Integer32read-createcurrent
fltNewCfgExtendedSipParsing
OBJECT-TYPE
Enable or disable SIP NAT.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.30INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedSessionMirror
OBJECT-TYPE
Enable or disable session mirroring.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.31INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedIpVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.32INTEGER {ipv4(1), ipv6(2)}read-createcurrent
fltNewCfgExtendedIpv6Sip
OBJECT-TYPE
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.33DisplayString (SIZE(0..40))read-createcurrent
fltNewCfgExtendedIpv6Sprefix
OBJECT-TYPE
The prefix length associated with source IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.34INTEGER (0..128)read-createcurrent
fltNewCfgExtendedIpv6Dip
OBJECT-TYPE
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.35DisplayString (SIZE(0..40))read-createcurrent
fltNewCfgExtendedIpv6Dprefix
OBJECT-TYPE
The prefix length associated with destination IP address .
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.36INTEGER (0..128)read-createcurrent
fltNewCfgExtendedHdrHash
OBJECT-TYPE
The header hash filter.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.37INTEGER {none(1), headerhash(2)}read-createcurrent
fltNewCfgExtendedHdrName
OBJECT-TYPE
The header name of the filter. Headerhash should be enabled before header name is configured.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.38DisplayString (SIZE(0..31))read-createcurrent
fltNewCfgExtendedHdrHashLen
OBJECT-TYPE
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.39INTEGER (1..255)read-createcurrent
fltNewCfgExtendedNatIp
OBJECT-TYPE
The nat IP address to be filtered.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.40IpAddressread-writecurrent
fltNewCfgExtendedIpv6Nip
OBJECT-TYPE
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.41DisplayString (SIZE(0..40))read-writecurrent
fltNewCfgExtendedIpv6Proxy
OBJECT-TYPE
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.42DisplayString (SIZE(0..40))read-writecurrent
fltNewCfgExtendedL7SipFilt
OBJECT-TYPE
Enable/Disable L7 application SIP UDP filtering.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.43INTEGER {enabled(1), disabled(2)}read-writecurrent
fltNewCfgExtendedNatMcastVlan
OBJECT-TYPE
Multicast VLAN.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.44INTEGER (0..4090)read-writecurrent
fltNewCfgExtendedNbind
OBJECT-TYPE
Enable or disable subnet binding for redirection.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.45INTEGER {enabled(1), disabled(2)}read-createcurrent
fltNewCfgExtendedL3State
OBJECT-TYPE
The L3 filter processing state for this filter.
1.3.6.1.4.1.1872.2.5.4.1.2.12.1.46INTEGER {enabled(1), disabled(2)}read-createcurrent
gslbCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3
gslbGeneralCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.1
gslbCurCfgGenState
OBJECT-TYPE
Turn on or off Distributed Server Load Balance.
1.3.6.1.4.1.1872.2.5.4.1.3.1.1INTEGER {on(1), off(2)}read-onlycurrent
gslbNewCfgGenState
OBJECT-TYPE
Turn on or off Distributed Server Load Balance.
1.3.6.1.4.1.1872.2.5.4.1.3.1.2INTEGER {on(1), off(2)}read-writecurrent
gslbCurCfgGenHttpRedirect
OBJECT-TYPE
Enable/Disable HTTP redirect based GSLB in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenHttpRedirect
OBJECT-TYPE
Enable/Disable HTTP redirect based GSLB in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenMinco
OBJECT-TYPE
Minmum number of site connections in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.13INTEGER (0..65535)read-onlycurrent
gslbNewCfgGenMinco
OBJECT-TYPE
Minmum number of site connections in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.14INTEGER (0..65535)read-writecurrent
gslbCurCfgGenUsern
OBJECT-TYPE
Enable/Disable HTTP redirect to real server name.
1.3.6.1.4.1.1872.2.5.4.1.3.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenUsern
OBJECT-TYPE
Enable/Disable HTTP redirect to real server name.
1.3.6.1.4.1.1872.2.5.4.1.3.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenNoremote
OBJECT-TYPE
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down.
1.3.6.1.4.1.1872.2.5.4.1.3.1.25INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenNoremote
OBJECT-TYPE
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down.
1.3.6.1.4.1.1872.2.5.4.1.3.1.26INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenEncrypt
OBJECT-TYPE
Enable/Disable encrypting remote site update.
1.3.6.1.4.1.1872.2.5.4.1.3.1.27INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenEncrypt
OBJECT-TYPE
Enable/Disable encrypting remote site update.
1.3.6.1.4.1.1872.2.5.4.1.3.1.28INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenRemSiteUpdatePort
OBJECT-TYPE
TCP port number for remote site updates in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.29INTEGER (1..65535)read-onlycurrent
gslbNewCfgGenRemSiteUpdatePort
OBJECT-TYPE
TCP port number for remote site updates in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.30INTEGER (1..65535)read-writecurrent
gslbCurCfgGenSessUtilCap
OBJECT-TYPE
Session utilization capacity threshold in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.31INTEGER (1..100)read-onlycurrent
gslbNewCfgGenSessUtilCap
OBJECT-TYPE
Session utilization capacity threshold in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.32INTEGER (1..100)read-writecurrent
gslbCurCfgGenCpuUtilCap
OBJECT-TYPE
CPU utilization capacity threshold in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.33INTEGER (1..100)read-onlycurrent
gslbNewCfgGenCpuUtilCap
OBJECT-TYPE
CPU utilization capacity threshold in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.34INTEGER (1..100)read-writecurrent
gslbCurCfgGenSourceIpNetmask
OBJECT-TYPE
Source IP netmask for DNS persistence cache in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.35IpAddressread-onlycurrent
gslbNewCfgGenSourceIpNetmask
OBJECT-TYPE
Source IP netmask for DNS persistence cache in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.36IpAddressread-writecurrent
gslbCurCfgGenTimeout
OBJECT-TYPE
Timeout in minutes for DNS persistence cache in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.37INTEGER (1..1440)read-onlycurrent
gslbNewCfgGenTimeout
OBJECT-TYPE
Timeout in minutes for DNS persistence cache in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.38INTEGER (1..1440)read-writecurrent
gslbCurCfgGenDnsDirect
OBJECT-TYPE
Enable/Disable authoritative DNS direct based Global SLB in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.39INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenDnsDirect
OBJECT-TYPE
Enable/Disable authoritative DNS direct based Global SLB in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.40INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenRemSiteUpdateVersion
OBJECT-TYPE
DSSP version 1,2,3,4 or 5 to send out remote site updates in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.41INTEGER (1..5)read-onlycurrent
gslbNewCfgGenRemSiteUpdateVersion
OBJECT-TYPE
DSSP version 1,2,3,4 or 5 to send out remote site updates in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.42INTEGER (1..5)read-writecurrent
gslbCurCfgGenHostname
OBJECT-TYPE
Enable/Disable virtual service hostname matching in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.43INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgGenHostname
OBJECT-TYPE
Enable/Disable virtual service hostname matching in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.44INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgGenRemSiteUpdateIntervalSeconds
OBJECT-TYPE
The time interval in seconds for updating remote site status in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.45INTEGER (10..7200)read-onlycurrent
gslbNewCfgGenRemSiteUpdateIntervalSeconds
OBJECT-TYPE
The time interval in seconds for updating remote site status in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.46INTEGER (10..7200)read-writecurrent
gslbCurCfgGenNoResp
OBJECT-TYPE
DNS response code when no server is returned for the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.47INTEGER (1..5)read-onlycurrent
gslbNewCfgGenNoResp
OBJECT-TYPE
DNS response code when no server is returned for the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.48INTEGER (1..5)read-writecurrent
gslbCurCfgProximityTime
OBJECT-TYPE
Current_configuration block maximum time allowed for Client Proximity calculation.
1.3.6.1.4.1.1872.2.5.4.1.3.1.49INTEGER (1..24)read-onlycurrent
gslbNewCfgProximityTime
OBJECT-TYPE
New_configuration block maximum time allowed for Client Proximity calculation.
1.3.6.1.4.1.1872.2.5.4.1.3.1.50INTEGER (1..24)read-writecurrent
gslbCurCfgProximityMask
OBJECT-TYPE
Client Proximity default netmask of the client cache for the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.51INTEGER (8..24)read-onlycurrent
gslbNewCfgProximityMask
OBJECT-TYPE
Client Proximity default netmask of the client cache for the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.52INTEGER (8..24)read-writecurrent
gslbCurCfgProximityAge
OBJECT-TYPE
Client Proximity Age timeout of each client network entries for the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.53INTEGER (0..10080)read-onlycurrent
gslbNewCfgProximityAge
OBJECT-TYPE
Client Proximity Age timeout of each client network entries for the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.54INTEGER (0..10080)read-writecurrent
gslbCurCfgGenSourceIpv6Prefix
OBJECT-TYPE
Source IPv6 prefix for DNS persistence cache in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.55INTEGER (0..128)read-onlycurrent
gslbNewCfgGenSourceIpv6Prefix
OBJECT-TYPE
Source IPv6 prefix for DNS persistence cache in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.1.56INTEGER (0..128)read-writecurrent
gslbSitesCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.2
gslbRemSiteTableMaxSize
OBJECT-TYPE
The maximum number of GSLB remote sites.
1.3.6.1.4.1.1872.2.5.4.1.3.2.1Integer32read-onlycurrent
gslbCurCfgRemSiteTable
OBJECT-TYPE
The GSLB remote site table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2not-accessiblecurrent
gslbCurCfgRemSiteTableEntry
OBJECT-TYPE
A row in the GSLB remote site table.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1not-accessiblecurrent
gslbCurCfgRemSiteIndx
OBJECT-TYPE
The GSLB remote site table index.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.1Integer32read-onlycurrent
gslbCurCfgRemSitePrimaryIp
OBJECT-TYPE
The primary IP address of the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.2IpAddressread-onlycurrent
gslbCurCfgRemSiteSecondaryIp
OBJECT-TYPE
The secondary IP address of the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.3IpAddressread-onlycurrent
gslbCurCfgRemSiteState
OBJECT-TYPE
Enable/Disable GSLB for the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbCurCfgRemSiteUpdate
OBJECT-TYPE
Enable/Disable GSLB for the remote site status update in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbCurCfgRemSiteName
OBJECT-TYPE
The name of the GSLB remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.6DisplayString (SIZE(0..31))read-onlycurrent
gslbCurCfgRemSitePrimaryIPVer
OBJECT-TYPE
The primary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.8INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbCurCfgRemSitePrimaryIp6
OBJECT-TYPE
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.9DisplayString (SIZE(0..40))read-onlycurrent
gslbCurCfgRemSiteSecondaryIPVer
OBJECT-TYPE
The secondary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.10INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbCurCfgRemSiteSecondaryIp6
OBJECT-TYPE
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.11DisplayString (SIZE(0..40))read-onlycurrent
gslbNewCfgRemSiteTable
OBJECT-TYPE
The GSLB remote site table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3not-accessiblecurrent
gslbNewCfgRemSiteTableEntry
OBJECT-TYPE
A row in the GSLB remote site table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1not-accessiblecurrent
gslbNewCfgRemSiteIndx
OBJECT-TYPE
The GSLB remote site table index.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.1Integer32read-onlycurrent
gslbNewCfgRemSitePrimaryIp
OBJECT-TYPE
The primary IP address of the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.2IpAddressread-createcurrent
gslbNewCfgRemSiteSecondaryIp
OBJECT-TYPE
The secondary IP address of the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.3IpAddressread-createcurrent
gslbNewCfgRemSiteState
OBJECT-TYPE
Enable/Disable GSLB for the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
gslbNewCfgRemSiteUpdate
OBJECT-TYPE
Enable/Disable GSLB for the remote site status update in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
gslbNewCfgRemSiteDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.6INTEGER {other(1), delete(2)}read-createcurrent
gslbNewCfgRemSiteName
OBJECT-TYPE
The name of the GSLB remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.7DisplayString (SIZE(0..31))read-createcurrent
gslbNewCfgRemSitePrimaryIPVer
OBJECT-TYPE
The primary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.9INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbNewCfgRemSitePrimaryIp6
OBJECT-TYPE
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.10DisplayString (SIZE(0..40))read-createcurrent
gslbNewCfgRemSiteSecondaryIPVer
OBJECT-TYPE
The secondary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.11INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbNewCfgRemSiteSecondaryIp6
OBJECT-TYPE
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.12DisplayString (SIZE(0..40))read-createcurrent
gslbEnhNetworkCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.4
gslbEnhNetworkTableMaxSize
OBJECT-TYPE
The maximum number of Global SLB networks.
1.3.6.1.4.1.1872.2.5.4.1.3.4.1Integer32read-onlycurrent
gslbCurCfgEnhNetworkTable
OBJECT-TYPE
The table of network preference in the current_config.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2not-accessiblecurrent
gslbCurCfgEnhNetworkTableEntry
OBJECT-TYPE
The table about a network preference entry configuration.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1not-accessiblecurrent
gslbCurCfgEnhNetworkIndx
OBJECT-TYPE
The current network preference table index.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.1Integer32read-onlycurrent
gslbCurCfgEnhNetworkState
OBJECT-TYPE
Enable/Disable Global SLB for the network in the current_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbCurCfgEnhNetworkSourceIp
OBJECT-TYPE
The Source IP address of the network preference table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.3IpAddressread-onlycurrent
gslbCurCfgEnhNetworkNetMask
OBJECT-TYPE
The Net mask of the network preference table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.4IpAddressread-onlycurrent
gslbCurCfgEnhNetworkVirtServer
OBJECT-TYPE
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.5OCTET STRINGread-onlycurrent
gslbCurCfgEnhNetworkRemRealServer
OBJECT-TYPE
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.6OCTET STRINGread-onlycurrent
gslbCurCfgEnhNetworkSourceIpV6
OBJECT-TYPE
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.7DisplayString (SIZE(0..40))read-onlycurrent
gslbCurCfgEnhNetworkVer
OBJECT-TYPE
The secondary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.8INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbCurCfgEnhNetworkSprefix
OBJECT-TYPE
The prefix length associated with the source IPV6 address of the network table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.9INTEGER (0..128)read-onlycurrent
gslbNewCfgEnhNetworkTable
OBJECT-TYPE
The table of network preference in the new_config.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3not-accessiblecurrent
gslbNewCfgEnhNetworkTableEntry
OBJECT-TYPE
The table about a network preference entry configuration.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1not-accessiblecurrent
gslbNewCfgEnhNetworkIndx
OBJECT-TYPE
The new network preference table index.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.1Integer32read-onlycurrent
gslbNewCfgEnhNetworkState
OBJECT-TYPE
Enable/Disable Global SLB for the network in the new_configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.2INTEGER {enabled(1), disabled(2)}read-createcurrent
gslbNewCfgEnhNetworkSourceIp
OBJECT-TYPE
The Source IP address of the network table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.3IpAddressread-createcurrent
gslbNewCfgEnhNetworkNetMask
OBJECT-TYPE
The Net mask of the network preference table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.4IpAddressread-createcurrent
gslbNewCfgEnhNetworkDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.5INTEGER {other(1), delete(2)}read-createcurrent
gslbNewCfgEnhNetworkVirtServer
OBJECT-TYPE
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.6OCTET STRINGread-onlycurrent
gslbNewCfgEnhNetworkRemRealServer
OBJECT-TYPE
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.7OCTET STRINGread-onlycurrent
gslbNewCfgEnhNetworkAddVirtServer
OBJECT-TYPE
The virtual server to be added to the network. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.8Integer32read-createcurrent
gslbNewCfgEnhNetworkRemoveVirtServer
OBJECT-TYPE
The virtual server to be removed from the network. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.9Integer32read-createcurrent
gslbNewCfgEnhNetworkAddRemRealServer
OBJECT-TYPE
The remote real server to be added to the network. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.10Integer32read-createcurrent
gslbNewCfgEnhNetworkRemoveRemRealServer
OBJECT-TYPE
The remote real server to be removed from the network. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.11Integer32read-createcurrent
gslbNewCfgEnhNetworkSourceIpV6
OBJECT-TYPE
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.12DisplayString (SIZE(0..40))read-createcurrent
gslbNewCfgEnhNetworkVer
OBJECT-TYPE
The secondary IP address version of the remote site.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.13INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbNewCfgEnhNetworkSprefix
OBJECT-TYPE
The prefix length associated with the source IPV6 address of the network table.
1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.14INTEGER (0..128)read-createcurrent
gslbRuleCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.5
gslbRuleTableMaxSize
OBJECT-TYPE
The maximum number of Global SLB rules.
1.3.6.1.4.1.1872.2.5.4.1.3.5.1Integer32read-onlycurrent
gslbCurCfgRuleTable
OBJECT-TYPE
The rule table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2not-accessiblecurrent
gslbCurCfgRuleTableEntry
OBJECT-TYPE
An entry in the rule table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1not-accessiblecurrent
gslbCurCfgRuleIndx
OBJECT-TYPE
The rule table index in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.1Integer32read-onlycurrent
gslbCurCfgRuleState
OBJECT-TYPE
Enable/Disable the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbCurCfgRuleStartHour
OBJECT-TYPE
Start hour in 24-hour format for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.3INTEGER (0..23)read-onlycurrent
gslbCurCfgRuleStartMin
OBJECT-TYPE
Start minutes for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.4INTEGER (0..59)read-onlycurrent
gslbCurCfgRuleEndHour
OBJECT-TYPE
End hour in 24-hour format for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.5INTEGER (0..23)read-onlycurrent
gslbCurCfgRuleEndMin
OBJECT-TYPE
End minutes for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.6INTEGER (0..59)read-onlycurrent
gslbCurCfgRuleTTL
OBJECT-TYPE
Time to live in seconds of DNS resource records for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.7INTEGER (0..65535)read-onlycurrent
gslbCurCfgRuleRR
OBJECT-TYPE
DNS resource records in DNS response for the rule in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.8INTEGER (1..10)read-onlycurrent
gslbCurCfgRuleDname
OBJECT-TYPE
Network preference domain name for rule.
1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.9DisplayString (SIZE(0..64))read-onlycurrent
gslbNewCfgRuleTable
OBJECT-TYPE
The rule table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3not-accessiblecurrent
gslbNewCfgRuleTableEntry
OBJECT-TYPE
An entry in the rule table in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1not-accessiblecurrent
gslbNewCfgRuleIndx
OBJECT-TYPE
The rule table index in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.1Integer32read-onlycurrent
gslbNewCfgRuleState
OBJECT-TYPE
Enable/Disable the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.2INTEGER {enabled(1), disabled(2)}read-createcurrent
gslbNewCfgRuleStartHour
OBJECT-TYPE
Start hour in 24-hour format for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.3INTEGER (0..23)read-writecurrent
gslbNewCfgRuleStartMin
OBJECT-TYPE
Start minutes for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.4INTEGER (0..59)read-writecurrent
gslbNewCfgRuleEndHour
OBJECT-TYPE
End hour in 24-hour format for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.5INTEGER (0..23)read-writecurrent
gslbNewCfgRuleEndMin
OBJECT-TYPE
End minutes for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.6INTEGER (0..59)read-writecurrent
gslbNewCfgRuleTTL
OBJECT-TYPE
Time to live in seconds of DNS resource records for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.7INTEGER (0..65535)read-writecurrent
gslbNewCfgRuleRR
OBJECT-TYPE
DNS resource records in DNS response for the rule in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.8INTEGER (1..10)read-writecurrent
gslbNewCfgRuleDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.9INTEGER {other(1), delete(2)}read-createcurrent
gslbNewCfgRuleDname
OBJECT-TYPE
Network preference domain name for rule
1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.10DisplayString (SIZE(0..64))read-createcurrent
gslbMetricTableMaxSize
OBJECT-TYPE
The maximum number of Global SLB metrics for each Global SLB rule.
1.3.6.1.4.1.1872.2.5.4.1.3.5.4Integer32read-onlycurrent
gslbCurCfgMetricTable
OBJECT-TYPE
The metric table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.5not-accessiblecurrent
gslbCurCfgMetricTableEntry
OBJECT-TYPE
An entry in the metric table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1not-accessiblecurrent
gslbCurCfgRuleMetricIndx
OBJECT-TYPE
The rule table index in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.1Integer32read-onlycurrent
gslbCurCfgMetricIndx
OBJECT-TYPE
The metric table index in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.2Integer32read-onlycurrent
gslbCurCfgMetricMetric
OBJECT-TYPE
The metric to use to select next server in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.3INTEGER {leastconns(1), roundrobin(2), response(3), geographical(4), network(5), random(6), availability(7), qos(8), minmisses(9), hash(10), local(11), always(12), remote(13), none(14), persistence(15)}read-onlycurrent
gslbCurCfgMetricNetworkBmap
OBJECT-TYPE
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.4OCTET STRINGread-onlycurrent
gslbNewCfgMetricTable
OBJECT-TYPE
The metric table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6not-accessiblecurrent
gslbNewCfgMetricTableEntry
OBJECT-TYPE
An entry in the metric table in the current configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1not-accessiblecurrent
gslbNewCfgRuleMetricIndx
OBJECT-TYPE
The rule table index in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.1Integer32read-onlycurrent
gslbNewCfgMetricIndx
OBJECT-TYPE
The metric table index in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.2Integer32read-onlycurrent
gslbNewCfgMetricMetric
OBJECT-TYPE
The metric to use to select next server in the new configuration block.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.3INTEGER {leastconns(1), roundrobin(2), response(3), geographical(4), network(5), random(6), availability(7), qos(8), minmisses(9), hash(10), local(11), always(12), remote(13), none(14), persistence(15)}read-writecurrent
gslbNewCfgMetricNetworkBmap
OBJECT-TYPE
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.4OCTET STRINGread-onlycurrent
gslbNewCfgMetricAddNetwork
OBJECT-TYPE
This is an action object to add network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.5Integer32read-writecurrent
gslbNewCfgMetricRemNetwork
OBJECT-TYPE
This is an action object to remove network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.6Integer32read-writecurrent
gslbDnsSecCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.6
gslbDnsSecGlobalCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.6.1
gslbCurCfgDnsSecGlobalEnabled
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
gslbNewCfgDnsSecGlobalEnabled
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbCurCfgDnsSecGlobalRollTm
OBJECT-TYPE
Automatic Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.3INTEGER (1..168)read-onlycurrent
gslbNewCfgDnsSecGlobalRollTm
OBJECT-TYPE
Automatic Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.4INTEGER (1..168)read-writecurrent
gslbCurCfgDnsSecGlobalType
OBJECT-TYPE
Automatic Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.5INTEGER {nsec(1), nsec3(2)}read-onlycurrent
gslbNewCfgDnsSecGlobalType
OBJECT-TYPE
Automatic Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.6INTEGER {nsec(1), nsec3(2)}read-writecurrent
gslbCurCfgDnsSecGlobalKskRollTm
OBJECT-TYPE
Automatic KSK Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.9INTEGER (1..168)read-onlycurrent
gslbNewCfgDnsSecGlobalKskRollTm
OBJECT-TYPE
Automatic KSK Roll Over Timer - In Hours.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.10INTEGER (1..168)read-writecurrent
gslbCurCfgDnsSecGlobalNsec3SaltLen
OBJECT-TYPE
NSEC3 Salt Length in bytes.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.11INTEGER (1..255)read-onlycurrent
gslbNewCfgDnsSecGlobalNsec3SaltLen
OBJECT-TYPE
NSEC3 Salt Length in bytes.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.12INTEGER (1..255)read-writecurrent
gslbCurCfgDnsSecGlobalNsec3SaltLifetime
OBJECT-TYPE
NSEC3 Salt Lifetime in seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.13INTEGER (86400..2419200)read-onlycurrent
gslbNewCfgDnsSecGlobalNsec3SaltLifetime
OBJECT-TYPE
NSEC3 Salt Lifetime in seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.14INTEGER (86400..2419200)read-writecurrent
gslbCurCfgDnsSecGlobalNsec3HashIterations
OBJECT-TYPE
NSEC3 Salt Hash Iterations.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.15INTEGER (1..500)read-onlycurrent
gslbNewCfgDnsSecGlobalNsec3HashIterations
OBJECT-TYPE
NSEC3 Salt Hash Iterations.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.16INTEGER (1..500)read-writecurrent
gslbCurCfgDnsSecGlobalSMPTServerUserName
OBJECT-TYPE
SMPT Server User Name.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.17DisplayString (SIZE(0..20))read-onlycurrent
gslbNewCfgDnsSecGlobalSMPTServerUserName
OBJECT-TYPE
SMPT Server User Name.
1.3.6.1.4.1.1872.2.5.4.1.3.6.1.18DisplayString (SIZE(0..20))read-writecurrent
gslbDnsSecKeyCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.6.2
gslbCurDnsSecKeyTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1not-accessiblecurrent
gslbCurDnsSecKeyEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1not-accessiblecurrent
gslbCurDnsSecKeyID
OBJECT-TYPE
DNS Sec Table Key.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecKeyUseCount
OBJECT-TYPE
Usage count.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.2INTEGER (0..65534)read-onlycurrent
gslbCurDnsSecKeyType
OBJECT-TYPE
KSK or ZSK.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.3INTEGER {keyTypeKSK(1), keyTypeZSK(2), keyTypeInvalid(3)}read-onlycurrent
gslbCurDnsSecKeyStatus
OBJECT-TYPE
Key status.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.4INTEGER {enable(1), disable(2)}read-onlycurrent
gslbCurDnsSecKeySize
OBJECT-TYPE
Size of key (bits).
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.5INTEGER {keySize1024(1), keySize2048(2), keySize4096(3), keySizeInvalid(4)}read-onlycurrent
gslbCurDnsSecKeyAlgo
OBJECT-TYPE
Signing algorithm.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.6INTEGER {keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)}read-onlycurrent
gslbCurDnsSecKeyTTL
OBJECT-TYPE
DNSSEC - TTL in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.7INTEGER (0..86400)read-onlycurrent
gslbCurDnsSecKeyExpPeriod
OBJECT-TYPE
Expiration period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.8Unsigned32 (1..4294967295)read-onlycurrent
gslbCurDnsSecKeyRollOverPeriod
OBJECT-TYPE
RollOver period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.9Unsigned32 (1..4294967295)read-onlycurrent
gslbCurDnsSecKeyValidityPeriod
OBJECT-TYPE
Signature validity period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.10Unsigned32 (1..4294967295)read-onlycurrent
gslbCurDnsSecKeyPublicationPeriod
OBJECT-TYPE
Signature publication period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.11Unsigned32 (1..4294967295)read-onlycurrent
gslbNewDnsSecKeyTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2not-accessiblecurrent
gslbNewDnsSecKeyEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1not-accessiblecurrent
gslbNewDnsSecKeyID
OBJECT-TYPE
DNS Sec Table Key.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.1DisplayString (SIZE(0..32))read-createcurrent
gslbNewDnsSecKeyUseCount
OBJECT-TYPE
Usage count.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.2INTEGER (0..65534)read-onlycurrent
gslbNewDnsSecKeyType
OBJECT-TYPE
KSK or ZSK.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.3INTEGER {keyTypeKSK(1), keyTypeZSK(2), keyTypeInvalid(3)}read-createcurrent
gslbNewDnsSecKeyStatus
OBJECT-TYPE
Key state.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
gslbNewDnsSecKeySize
OBJECT-TYPE
Size of key (bits).
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.5INTEGER {keySize1024(1), keySize2048(2), keySize4096(3), keySizeInvalid(4)}read-createcurrent
gslbNewDnsSecKeyAlgo
OBJECT-TYPE
Signing algorithm.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.6INTEGER {keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)}read-createcurrent
gslbNewDnsSecKeyTTL
OBJECT-TYPE
DNSSEC - TTL.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.7INTEGER (0..86400)read-writecurrent
gslbNewDnsSecKeyExpPeriod
OBJECT-TYPE
Expiration period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.8Unsigned32 (1..4294967295)read-writecurrent
gslbNewDnsSecKeyRollOverPeriod
OBJECT-TYPE
RollOver period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.9Unsigned32 (1..4294967295)read-writecurrent
gslbNewDnsSecKeyValidityPeriod
OBJECT-TYPE
Signature validity period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.10Unsigned32 (1..4294967295)read-writecurrent
gslbNewDnsSecKeyPublicationPeriod
OBJECT-TYPE
Signature publication period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.11Unsigned32 (1..4294967295)read-writecurrent
gslbNewDnsSecKeyDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.13INTEGER {other(1), delete(2)}read-createcurrent
gslbNewDnsSecKeyGenerate
OBJECT-TYPE
By setting the value to generate(2), the key will be generated.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.14INTEGER {other(1), generate(2)}read-createcurrent
gslbNewDnsSecKeyGenerateStatus
OBJECT-TYPE
Returns the generate status.
1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.15INTEGER {notGenerated(1), generated(2), inProgress(3)}read-onlycurrent
gslbDnsSecZoneCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.6.3
gslbCurDnsSecZoneTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1not-accessiblecurrent
gslbCurDnsSecZoneEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1not-accessiblecurrent
gslbCurDnsSecZoneID
OBJECT-TYPE
Zone ID.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneName
OBJECT-TYPE
Zone name (virt's dname).
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.2DisplayString (SIZE(0..65))read-onlycurrent
gslbCurDnsSecZoneKSK1
OBJECT-TYPE
KSK 1 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.3DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneKSK2
OBJECT-TYPE
KSK 2 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.4DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneKSK3
OBJECT-TYPE
KSK 3 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.5DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneZSK1
OBJECT-TYPE
ZSK 1 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.6DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneZSK2
OBJECT-TYPE
ZSK 2 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.7DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneZSK3
OBJECT-TYPE
ZSK 1 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.8DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsSecZoneStatus
OBJECT-TYPE
Zone status - Enabled/Disabled.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.9INTEGER {enable(1), disable(2)}read-onlycurrent
gslbCurDnsSecZoneParentIPVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.10INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbCurDnsSecZoneParentIPv4
OBJECT-TYPE
Parent IP.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.11IpAddressread-onlycurrent
gslbCurDnsSecZoneParentIPv6
OBJECT-TYPE
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.12DisplayString (SIZE(0..40))read-onlycurrent
gslbNewDnsSecZoneTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2not-accessiblecurrent
gslbNewDnsSecZoneEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1not-accessiblecurrent
gslbNewDnsSecZoneID
OBJECT-TYPE
Zone ID.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.1DisplayString (SIZE(0..32))read-createcurrent
gslbNewDnsSecZoneName
OBJECT-TYPE
Zone name (virt's dname).
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.2DisplayString (SIZE(0..65))read-writecurrent
gslbNewDnsSecZoneKSK1
OBJECT-TYPE
KSK 1 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.3DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneKSK2
OBJECT-TYPE
KSK 2 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.4DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneKSK3
OBJECT-TYPE
KSK 3 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.5DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneZSK1
OBJECT-TYPE
ZSK 1 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.6DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneZSK2
OBJECT-TYPE
ZSK 2 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.7DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneZSK3
OBJECT-TYPE
ZSK 3 of the zone.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.8DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsSecZoneStatus
OBJECT-TYPE
Zone status - Enabled/Disabled.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.9INTEGER {enable(1), disable(2)}read-writecurrent
gslbNewDnsSecZoneParentIPVer
OBJECT-TYPE
The type of IP address.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.10INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbNewDnsSecZoneParentIPv4
OBJECT-TYPE
IPV4 address of the Parent IP.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.11IpAddressread-writecurrent
gslbNewDnsSecZoneParentIPv6
OBJECT-TYPE
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.12DisplayString (SIZE(0..40))read-writecurrent
gslbNewDnsSecZoneDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.13INTEGER {other(1), delete(2)}read-writecurrent
gslbDnsSecImportExport
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.6.4
gslbDnsSecImportExportSCPHostName
OBJECT-TYPE
SCP Server Host Name or Server IP Address.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.1DisplayString (SIZE(0..128))read-writecurrent
gslbDnsSecImportExportSCPFileName
OBJECT-TYPE
SCP Server File name.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.2DisplayString (SIZE(0..128))read-writecurrent
gslbDnsSecImportExportSCPUserName
OBJECT-TYPE
SCP Server User Name.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.3DisplayString (SIZE(0..128))read-writecurrent
gslbDnsSecImportExportSCPPassword
OBJECT-TYPE
SCP Server Password.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.4DisplayString (SIZE(0..128))read-writecurrent
gslbDnsSecImportExportKeyID
OBJECT-TYPE
DNSSEC Key ID.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.5DisplayString (SIZE(0..32))read-writecurrent
gslbDnsSecImportExportZoneID
OBJECT-TYPE
DNSSEC Zone ID.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.6DisplayString (SIZE(0..32))read-writecurrent
gslbDnsSecImportExportPassphrase
OBJECT-TYPE
Passphrase.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.7DisplayString (SIZE(0..40))read-writecurrent
gslbDnsSecImportExportComponentType
OBJECT-TYPE
Component type to import/export: key, dnskey or ds record. Currently only the key is Supported
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.8INTEGER {none(0), key(1), dnskey(2), dsrecord(3)}read-writecurrent
gslbDnsSecImportExportPortType
OBJECT-TYPE
The port type: management or data.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.9INTEGER {data(0), mgmt(1)}read-writecurrent
gslbDnsSecImportExportImpKeyType
OBJECT-TYPE
KSK or ZSK.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.10INTEGER {keyTypeKSK(1), keyTypeZSK(2)}read-writecurrent
gslbDnsSecImportExportImpKeyStatus
OBJECT-TYPE
Key status.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.11INTEGER {enable(1), disable(2)}read-writecurrent
gslbDnsSecImportExportImpKeySize
OBJECT-TYPE
Size of key (bits).
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.12INTEGER {keySize1024(1), keySize2048(2), keySize4096(3)}read-onlycurrent
gslbDnsSecImportExportImpKeyAlgo
OBJECT-TYPE
Signing algorithm.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.13INTEGER {keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)}read-writecurrent
gslbDnsSecImportExportImpKeyTTL
OBJECT-TYPE
DNSSEC - TTL in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.14INTEGER (0..86400)read-writecurrent
gslbDnsSecImportExportImpKeyExpPeriod
OBJECT-TYPE
Expiration period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.15Unsigned32 (1..4294967295)read-writecurrent
gslbDnsSecImportExportImpKeyRollOverPeriod
OBJECT-TYPE
RollOver period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.16Unsigned32 (1..4294967295)read-writecurrent
gslbDnsSecImportExportImpKeyValidityPeriod
OBJECT-TYPE
Signature validity period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.17Unsigned32 (1..4294967295)read-writecurrent
gslbDnsSecImportExportImpKeyPublicationPeriod
OBJECT-TYPE
Signature publication period in Seconds.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.18Unsigned32 (1..4294967295)read-writecurrent
gslbDnsSecImportExportAction
OBJECT-TYPE
Component type to import/export: key or dnskey.
1.3.6.1.4.1.1872.2.5.4.1.3.6.4.19INTEGER {none(0), import(1), export(2)}read-writecurrent
gslbDnsResVipCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.3.7
gslbCurDnsResVipTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1not-accessiblecurrent
gslbCurDnsResVipEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1not-accessiblecurrent
gslbCurDnsResVipIndex1
OBJECT-TYPE
DNS Responder VIP Index 1.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.1INTEGER (1..1024)read-onlycurrent
gslbCurDnsResVipIndex2
OBJECT-TYPE
DNS Responder VIP Index 2.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.2INTEGER (1..1024)read-onlycurrent
gslbCurDnsResVipName
OBJECT-TYPE
DNS Responder VIP Name.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.3DisplayString (SIZE(0..32))read-onlycurrent
gslbCurDnsResVipIPVer
OBJECT-TYPE
The type of IP address of DNS Responder VIP.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.4INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbCurDnsResVipV4
OBJECT-TYPE
IPV4 address of the DNS Responder VIP.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.5IpAddressread-onlycurrent
gslbCurDnsResVipV6
OBJECT-TYPE
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.6DisplayString (SIZE(0..40))read-onlycurrent
gslbCurDnsResVipStatus
OBJECT-TYPE
Zone status - Enabled/Disabled.
1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.7INTEGER {enable(1), disable(2)}read-onlycurrent
gslbNewDnsResVipTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2not-accessiblecurrent
gslbNewDnsResVipEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1not-accessiblecurrent
gslbNewDnsResVipIndex1
OBJECT-TYPE
DNS Responder VIP Index 1.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.1INTEGER (1..1024)read-createcurrent
gslbNewDnsResVipIndex2
OBJECT-TYPE
DNS Responder VIP Index 2.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.2INTEGER (1..1024)read-createcurrent
gslbNewDnsResVipName
OBJECT-TYPE
DNS Responder VIP Name.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.3DisplayString (SIZE(0..32))read-writecurrent
gslbNewDnsResVipIPVer
OBJECT-TYPE
The type of IP address of DNS Responder VIP.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.4INTEGER {ipv4(1), ipv6(2)}read-writecurrent
gslbNewDnsResVipV4
OBJECT-TYPE
IPV4 address of the DNS Responder VIP.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.5IpAddressread-writecurrent
gslbNewDnsResVipV6
OBJECT-TYPE
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.6DisplayString (SIZE(0..40))read-writecurrent
gslbNewDnsResVipStatus
OBJECT-TYPE
Zone status - Enabled/Disabled.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.7INTEGER {enable(1), disable(2)}read-writecurrent
gslbNewDnsResVipDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.8INTEGER {other(1), delete(2)}read-writecurrent
gslbDnsResVipEmptyIndexesTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.3not-accessiblecurrent
gslbDnsResVipEmptyIndexesEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1not-accessiblecurrent
gslbDnsResVipEmptyIndexesIndex
OBJECT-TYPE
DNS Responder VIP Index.
1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1.1INTEGER (1..1024)read-onlycurrent
layer4TableSize
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.4
curCfgFilterTableSize
OBJECT-TYPE
Indicates the number of entries in the filter table current configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.1Integer32read-onlycurrent
newCfgFilterTableSize
OBJECT-TYPE
Indicates the number of entries in the filter table new configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.2Integer32read-onlycurrent
curCfgRealServerTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB real server table current configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.3Integer32read-onlycurrent
newCfgRealServerTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB real server table new configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.4Integer32read-onlycurrent
curCfgRealServerGroupTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB real server group table current configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.5Integer32read-onlycurrent
newCfgRealServerGroupTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB real server group table new configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.6Integer32read-onlycurrent
curCfgVirtServerTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB virtual server table current configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.7Integer32read-onlycurrent
newCfgVirtServerTableSize
OBJECT-TYPE
Indicates the number of entries in the SLB virtual server table new configuration.
1.3.6.1.4.1.1872.2.5.4.1.4.8Integer32read-onlycurrent
wlmCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.1.6
slbWlmTableMaxSize
OBJECT-TYPE
The maximum number of entries in Workload Manager table.
1.3.6.1.4.1.1872.2.5.4.1.6.1Integer32read-onlycurrent
slbCurCfgWlmTable
OBJECT-TYPE
The table of Workload Managers configuration.
1.3.6.1.4.1.1872.2.5.4.1.6.2not-accessiblecurrent
slbCurCfgWlmEntry
OBJECT-TYPE
Information about a particular Workload Manager configuration.
1.3.6.1.4.1.1872.2.5.4.1.6.2.1not-accessiblecurrent
slbCurCfgWlmIndex
OBJECT-TYPE
The Workload Manager number
1.3.6.1.4.1.1872.2.5.4.1.6.2.1.1Integer32read-onlycurrent
slbCurCfgWlmIpAddr
OBJECT-TYPE
IP address of the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.2.1.2IpAddressread-onlycurrent
slbCurCfgWlmPort
OBJECT-TYPE
The port number for the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.2.1.3INTEGER (0..65534)read-onlycurrent
slbCurCfgWlmGroups
OBJECT-TYPE
The group number for the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.2.1.4DisplayString (SIZE(0..255))read-onlycurrent
slbCurCfgWlmState
OBJECT-TYPE
Connection state of the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.2.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbNewCfgWlmTable
OBJECT-TYPE
The table of Workload Managers configuration.
1.3.6.1.4.1.1872.2.5.4.1.6.3not-accessiblecurrent
slbNewCfgWlmEntry
OBJECT-TYPE
Information about a particular Workload Manager configuration.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1not-accessiblecurrent
slbNewCfgWlmIndex
OBJECT-TYPE
The Workload Manager number
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.1Integer32read-onlycurrent
slbNewCfgWlmIpAddr
OBJECT-TYPE
IP address of the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.2IpAddressread-createcurrent
slbNewCfgWlmPort
OBJECT-TYPE
The port number for the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.3INTEGER (0..65534)read-createcurrent
slbNewCfgWlmDelete
OBJECT-TYPE
By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.4INTEGER {other(1), delete(2)}read-createcurrent
slbNewCfgWlmGroups
OBJECT-TYPE
The group number for the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.5DisplayString (SIZE(0..255))read-onlycurrent
slbNewCfgWlmState
OBJECT-TYPE
Connection state of the Workload Manager.
1.3.6.1.4.1.1872.2.5.4.1.6.3.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
layer4Stats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2
slbSpStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.1
slbStatSpRealServerTable
OBJECT-TYPE
The sp-server statistics table. This table shows the statistics of real servers for a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.1not-accessiblecurrent
slbStatSpRealServerEntry
OBJECT-TYPE
A row in the sp-server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1not-accessiblecurrent
slbStatSpRealServerSpIndex
OBJECT-TYPE
The SP index.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.1Integer32read-onlycurrent
slbStatSpRealServerServerIndex
OBJECT-TYPE
The real server number that identifies the server.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.2Integer32read-onlycurrent
slbStatSpRealServerCurrSessions
OBJECT-TYPE
The current sessions for the real server.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.3Gauge32read-onlycurrent
slbStatSpRealServerTotalSessions
OBJECT-TYPE
The total number of sessions for the real server.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.4Counter32read-onlycurrent
slbStatSpRealServerHCOctetsLow32
OBJECT-TYPE
The lower 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.5Counter32read-onlycurrent
slbStatSpRealServerHCOctetsHigh32
OBJECT-TYPE
The higher 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.6Counter32read-onlycurrent
slbStatSpRealServerHCOctets
OBJECT-TYPE
The total octets received and transmitted by the real server on a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.1.1.7Counter64read-onlycurrent
slbStatSpFltTable
OBJECT-TYPE
The filter statistics table. This table shows the statistics of filters for a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.4not-accessiblecurrent
slbStatSpFltEntry
OBJECT-TYPE
A row in the filter statistics table.
1.3.6.1.4.1.1872.2.5.4.2.1.4.1not-accessiblecurrent
slbStatSpFltSpIndex
OBJECT-TYPE
The SP index.
1.3.6.1.4.1.1872.2.5.4.2.1.4.1.1Integer32read-onlycurrent
slbStatSpFltIndex
OBJECT-TYPE
The filter number.
1.3.6.1.4.1.1872.2.5.4.2.1.4.1.2Integer32read-onlycurrent
slbStatSpFltFirings
OBJECT-TYPE
The number of instances that the received packet matches the filter rule on this SP.
1.3.6.1.4.1.1872.2.5.4.2.1.4.1.3Counter32read-onlycurrent
slbStatSpMaintTable
OBJECT-TYPE
The table of SLB SP maintenance statistics.
1.3.6.1.4.1.1872.2.5.4.2.1.5not-accessiblecurrent
slbStatSpMaintEntry
OBJECT-TYPE
A row in the SLB SP maintenance statistics table.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1not-accessiblecurrent
slbStatSpMaintSpIndex
OBJECT-TYPE
The SP number for which the statistics apply.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.1Integer32read-onlycurrent
slbStatSpMaintMaximumSessions
OBJECT-TYPE
The maximun number of entries per SP in the session table.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.2Integer32read-onlycurrent
slbStatSpMaintCurBindings
OBJECT-TYPE
The current number of sessions on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.3Gauge32read-onlycurrent
slbStatSpMaintCurBindings4Seconds
OBJECT-TYPE
The 4 second average current number of sessions on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.4Gauge32read-onlycurrent
slbStatSpMaintCurBindings64Seconds
OBJECT-TYPE
The 64 second average current number of sessions on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.5Gauge32read-onlycurrent
slbStatSpMaintTerminatedSessions
OBJECT-TYPE
The count of the number of sessions closed because the server failed.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.6Counter32read-onlycurrent
slbStatSpMaintBindingFails
OBJECT-TYPE
The total number of binding failures on the SP. A binding failure occurs when a SP runs out of session table entries.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.7Counter32read-onlycurrent
slbStatSpMaintNonTcpFrames
OBJECT-TYPE
The total number of non-TCP/IP frames dropped on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.8Counter32read-onlycurrent
slbStatSpMaintTcpFragments
OBJECT-TYPE
The total number of TCP fragments dropped on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.9Counter32read-onlyobsolete
slbStatSpMaintUdpDatagrams
OBJECT-TYPE
The total number of UDP datagrams dropped on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.10Counter32read-onlycurrent
slbStatSpMaintIncorrectVIPs
OBJECT-TYPE
The total number of frames with incorrect VIPs that are dropped on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.11Counter32read-onlycurrent
slbStatSpMaintIncorrectVports
OBJECT-TYPE
The total number of frames with incorrect Virtual Port that are dropped on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.12Counter32read-onlycurrent
slbStatSpMaintRealServerNoAvails
OBJECT-TYPE
The total number of frames that are dropped on the SP because no real server is available.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.13Counter32read-onlycurrent
slbStatSpMaintFilteredDeniedFrames
OBJECT-TYPE
The total number of frames that are denied on the SP by the filter.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.14Counter32read-onlycurrent
slbStatSpMaintLandAttacks
OBJECT-TYPE
The total number of attacks that frames contain the same source and destination IP addresses.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.15Counter32read-onlycurrent
slbStatSpMaintIpFragTotalSessions
OBJECT-TYPE
The total number of fragment sessions processed on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.16Counter32read-onlycurrent
slbStatSpMaintIpFragCurSessions
OBJECT-TYPE
The number of sessions in the IP fragment binding table on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.17Gauge32read-onlycurrent
slbStatSpMaintIpFragDiscards
OBJECT-TYPE
The total number of fragments discarded on the SP because there is no entry in the IP fragment binding table.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.18Counter32read-onlycurrent
slbStatSpMaintIpFragTableFull
OBJECT-TYPE
The total number of times IP fragment binding table is full on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.19Counter32read-onlycurrent
slbStatSpMaintClear
OBJECT-TYPE
This is an action object to clear the non-operational SLB statistics on the particular SP. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.20INTEGER {ok(1), clear(2)}read-writecurrent
slbStatSpMaintOOSFinPktDrops
OBJECT-TYPE
The total number of Out of state FIN Packets received on the SP.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.21Counter32read-onlycurrent
slbStatSpMaintSymSessions
OBJECT-TYPE
Number of Symantec sessions.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.22Counter32read-onlycurrent
slbStatSpMaintSymValidSegments
OBJECT-TYPE
Number of Symantec valid segments.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.23Counter32read-onlycurrent
slbStatSpMaintSymFragSessions
OBJECT-TYPE
Number of Symantec fragment sessions.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.24Counter32read-onlycurrent
slbStatSpMaintSymSegAllocFails
OBJECT-TYPE
Number of Symantec segment allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.25Counter32read-onlycurrent
slbStatSpMaintSymBufferAllocFails
OBJECT-TYPE
Number of Symantec buffers allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.26Counter32read-onlycurrent
slbStatSpMaintSymConnAllocFails
OBJECT-TYPE
Number of Symantec Connection allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.27Counter32read-onlycurrent
slbStatSpMaintSymInvalidBuffers
OBJECT-TYPE
Number of Symantec Invalid buffers.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.28Counter32read-onlycurrent
slbStatSpMaintSymSegReallocFails
OBJECT-TYPE
Number of Symantec Segment reallocation fails.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.29Counter32read-onlycurrent
slbStatSpMaintSymPacketsIn
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of packets in.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.30Counter32read-onlycurrent
slbStatSpMaintSymPacketsWithNoData
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of packets with no data.
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.31Counter32read-onlycurrent
slbStatSpMaintSymTcpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of TCP packets
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.32Counter32read-onlycurrent
slbStatSpMaintSymUdpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of UDP Packets
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.33Counter32read-onlycurrent
slbStatSpMaintSymIcmpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of ICMP Packets
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.34Counter32read-onlycurrent
slbStatSpMaintSymOtherPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of Packets other than TCP UDP or ICMP
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.35Counter32read-onlycurrent
slbStatSpMaintSymMatchCount
OBJECT-TYPE
Symantec Deuce Inspection Stats - Match Count
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.36Counter32read-onlycurrent
slbStatSpMaintSymFetchErrors
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of Fetch Errors
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.37Counter32read-onlycurrent
slbStatSpMaintSymTruncPayloadToMp
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of Truncated payload to MP
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.38Counter32read-onlycurrent
slbStatSpMaintSymPacketsInFastPath
OBJECT-TYPE
Symantec Deuce Inspection Stats - No. of Packets in fast path
1.3.6.1.4.1.1872.2.5.4.2.1.5.1.39Counter32read-onlycurrent
slbStatSpAuxSessTable
OBJECT-TYPE
The auxiliary session table statistics for a particular SP.
1.3.6.1.4.1.1872.2.5.4.2.1.6not-accessiblecurrent
slbStatSpAuxSessEntry
OBJECT-TYPE
The statistics of a particular auxiliary session table entry.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1not-accessiblecurrent
slbStatSpAuxSessSpIndex
OBJECT-TYPE
The SP number.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1.1Integer32read-onlycurrent
slbStatSpAuxSessIndex
OBJECT-TYPE
The auxiliary session table number.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1.2Integer32read-onlycurrent
slbStatSpAuxSessCurConn
OBJECT-TYPE
The number of connections in this auxiliary sessions table.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1.3Gauge32read-onlycurrent
slbStatSpAuxSessMaxConn
OBJECT-TYPE
The maximum number of connections handled by this auxiliary session table.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1.4Integer32read-onlycurrent
slbStatSpAuxSessAllocFails
OBJECT-TYPE
The total number of allocation failures for this auxiliary session table.
1.3.6.1.4.1.1872.2.5.4.2.1.6.1.5Counter32read-onlycurrent
slbStatRServerTable
OBJECT-TYPE
The real server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.2not-accessiblecurrent
slbStatRServerEntry
OBJECT-TYPE
The statistics of a particular real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1not-accessiblecurrent
slbStatRServerIndex
OBJECT-TYPE
The real server number that identifies the server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.1Integer32read-onlycurrent
slbStatRServerCurrSessions
OBJECT-TYPE
The number of sessions that are currently handled by the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.2Gauge32read-onlycurrent
slbStatRServerTotalSessions
OBJECT-TYPE
The total number of sessions that are handled by the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.3Counter32read-onlycurrent
slbStatRServerFailures
OBJECT-TYPE
The total number of times that the real server is claimed down.
1.3.6.1.4.1.1872.2.5.4.2.2.1.4Counter32read-onlycurrent
slbStatRServerHighestSessions
OBJECT-TYPE
The highest sessions that have been handled by the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.5Counter32read-onlycurrent
slbStatRServerHCOctetsLow32
OBJECT-TYPE
The lower 32 bit value of octets received and transmitted out of the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.6Counter32read-onlycurrent
slbStatRServerHCOctetsHigh32
OBJECT-TYPE
The higher 32 bit value of octets received and transmitted out of the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.7Counter32read-onlycurrent
slbStatRServerHCOctets
OBJECT-TYPE
The total number of octets received and transmitted by the real server.
1.3.6.1.4.1.1872.2.5.4.2.2.1.8Counter64read-onlycurrent
slbStatGroupTable
OBJECT-TYPE
The real server group statistics table.
1.3.6.1.4.1.1872.2.5.4.2.3not-accessiblecurrent
slbStatGroupEntry
OBJECT-TYPE
The statistics of a particular real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1not-accessiblecurrent
slbStatGroupIndex
OBJECT-TYPE
The real server group number that identifies the group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.1Integer32read-onlycurrent
slbStatGroupCurrSessions
OBJECT-TYPE
The number of sessions that are currently handled by the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.2Gauge32read-onlycurrent
slbStatGroupTotalSessions
OBJECT-TYPE
The total number of sessions that are handled by the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.3Counter32read-onlycurrent
slbStatGroupHighestSessions
OBJECT-TYPE
The highest sessions that have been handled by the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.4Counter32read-onlycurrent
slbStatGroupHCOctetsLow32
OBJECT-TYPE
The lower 32 bit value of octets received and transmitted out of the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.5Counter32read-onlycurrent
slbStatGroupHCOctetsHigh32
OBJECT-TYPE
The higher 32 bit value of octets received and transmitted out of the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.6Counter32read-onlycurrent
slbStatGroupHCOctets
OBJECT-TYPE
The total octets received and transmitted by the real server group.
1.3.6.1.4.1.1872.2.5.4.2.3.1.7Counter64read-onlycurrent
slbStatGroupWlmUpdates
OBJECT-TYPE
Total weight updates from work load manager.
1.3.6.1.4.1.1872.2.5.4.2.3.1.8Counter32read-onlycurrent
slbStatVServerTable
OBJECT-TYPE
The virtual server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.4not-accessiblecurrent
slbStatVServerEntry
OBJECT-TYPE
The statistics of a particular virtual server group.
1.3.6.1.4.1.1872.2.5.4.2.4.1not-accessiblecurrent
slbStatVServerIndex
OBJECT-TYPE
The virtual server number that identifies the server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.1Integer32read-onlycurrent
slbStatVServerCurrSessions
OBJECT-TYPE
The number of sessions that are currently handled by the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.2Gauge32read-onlycurrent
slbStatVServerTotalSessions
OBJECT-TYPE
The total number of sessions that are handled by the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.3Counter32read-onlycurrent
slbStatVServerHighestSessions
OBJECT-TYPE
The highest sessions that have been handled by the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.4Counter32read-onlycurrent
slbStatVServerHCOctetsLow32
OBJECT-TYPE
The lower 32 bit value of octets received and transmitted out of the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.5Counter32read-onlycurrent
slbStatVServerHCOctetsHigh32
OBJECT-TYPE
The higher 32 bit value of octets received and transmitted out of the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.6Counter32read-onlycurrent
slbStatVServerHeaderHits
OBJECT-TYPE
The current HTTP header hits.
1.3.6.1.4.1.1872.2.5.4.2.4.1.8Counter32read-onlycurrent
slbStatVServerHeaderMisses
OBJECT-TYPE
The current HTTP header misses.
1.3.6.1.4.1.1872.2.5.4.2.4.1.9Counter32read-onlycurrent
slbStatVServerHeaderTotalSessions
OBJECT-TYPE
The total HTTP header sessions.
1.3.6.1.4.1.1872.2.5.4.2.4.1.10Counter32read-onlycurrent
slbStatVServerCookieRewrites
OBJECT-TYPE
The total Cookie Rewrites.
1.3.6.1.4.1.1872.2.5.4.2.4.1.11Counter32read-onlycurrent
slbStatVServerCookieInserts
OBJECT-TYPE
The total Cookie Inserts.
1.3.6.1.4.1.1872.2.5.4.2.4.1.12Counter32read-onlycurrent
slbStatVServerHCOctets
OBJECT-TYPE
The total octets received and transmitted by the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.13Counter64read-onlycurrent
slbStatVServerIpAddress
OBJECT-TYPE
IP address of the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.4.1.14DisplayStringread-onlycurrent
slbMaintStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.5
slbStatMaintMaximumSessions
OBJECT-TYPE
The maximun number entries in the session table.
1.3.6.1.4.1.1872.2.5.4.2.5.1Integer32read-onlycurrent
slbStatMaintCurBindings
OBJECT-TYPE
The current number of bindings on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.2Gauge32read-onlycurrent
slbStatMaintCurBindings4Seconds
OBJECT-TYPE
The 4 second average current number of bindings on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.3Gauge32read-onlycurrent
slbStatMaintCurBindings64Seconds
OBJECT-TYPE
The 64 second average current number of bindings on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.4Gauge32read-onlycurrent
slbStatMaintTerminatedSessions
OBJECT-TYPE
The count of the number of sessions closed because the server failed.
1.3.6.1.4.1.1872.2.5.4.2.5.5Counter32read-onlycurrent
slbStatMaintAllocFailures
OBJECT-TYPE
The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries.
1.3.6.1.4.1.1872.2.5.4.2.5.6Counter32read-onlycurrent
slbStatMaintNonTcpFrames
OBJECT-TYPE
The total number of non-TCP/IP frames dropped on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.7Counter32read-onlycurrent
slbStatMaintTcpFragments
OBJECT-TYPE
The total number of TCP fragments dropped on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.8Counter32read-onlycurrent
slbStatMaintUdpDatagrams
OBJECT-TYPE
The total number of UDP datagrams dropped on the port.
1.3.6.1.4.1.1872.2.5.4.2.5.9Counter32read-onlycurrent
slbIncorrectVirtServs
OBJECT-TYPE
Incorrect Virtual Servers specified for Server Load Balancing.
1.3.6.1.4.1.1872.2.5.4.2.5.10Counter32read-onlycurrent
slbIncorrectVports
OBJECT-TYPE
Incorrect Virtual ports specified for Server Load Balancing.
1.3.6.1.4.1.1872.2.5.4.2.5.11Counter32read-onlycurrent
slbNoRealServs
OBJECT-TYPE
No Real Servers available for Server Load Balancing.
1.3.6.1.4.1.1872.2.5.4.2.5.12Counter32read-onlycurrent
slbStatMaintBackupServActs
OBJECT-TYPE
The total number of times that backup servers become active due to failure of primary servers.
1.3.6.1.4.1.1872.2.5.4.2.5.13Counter32read-onlycurrent
slbStatMaintOverflowServActs
OBJECT-TYPE
The total number of times that backup servers become active due to primary servers reach overflow situation.
1.3.6.1.4.1.1872.2.5.4.2.5.14Counter32read-onlycurrent
slbStatMaintFilteredDeniedFrames
OBJECT-TYPE
The total number of frames that are denied on the port by the filter.
1.3.6.1.4.1.1872.2.5.4.2.5.15Counter32read-onlycurrent
slbStatMaintLandAttacks
OBJECT-TYPE
The total number of attacks that frames contain the same source and destination IP addresses.
1.3.6.1.4.1.1872.2.5.4.2.5.16Counter32read-onlycurrent
slbStatMaintIpFragTotalSessions
OBJECT-TYPE
The total number of fragment sessions processed.
1.3.6.1.4.1.1872.2.5.4.2.5.17Counter32read-onlycurrent
slbStatMaintIpFragCurSessions
OBJECT-TYPE
The number of sessions in the IP fragment binding table.
1.3.6.1.4.1.1872.2.5.4.2.5.18Gauge32read-onlycurrent
slbStatMaintIpFragDiscards
OBJECT-TYPE
The total number of fragmemts discarded on the SP because there is no entry in the IP fragment binding table.
1.3.6.1.4.1.1872.2.5.4.2.5.19Counter32read-onlycurrent
slbStatMaintIpFragTableFull
OBJECT-TYPE
The total number times IP fragment binding table is full on the SP.
1.3.6.1.4.1.1872.2.5.4.2.5.20Counter32read-onlycurrent
slbStatMaintIp6CurrSessions
OBJECT-TYPE
The number of sessions for ipv6.
1.3.6.1.4.1.1872.2.5.4.2.5.21Counter32read-onlycurrent
slbIncorrectIp6Vip
OBJECT-TYPE
Incorrect Ip6 VIPs specified for server load balancing.
1.3.6.1.4.1.1872.2.5.4.2.5.22Counter32read-onlycurrent
slbIncorrectIp6Vports
OBJECT-TYPE
Incorrect Ip6 virtual ports specified for server load balancing.
1.3.6.1.4.1.1872.2.5.4.2.5.23Counter32read-onlycurrent
slbStatMaintIp6PktDropped
OBJECT-TYPE
The total number of Ip6 pacekets dropped.
1.3.6.1.4.1.1872.2.5.4.2.5.24Counter32read-onlycurrent
slbStatMaintOOSFinPktDrops
OBJECT-TYPE
The total number Out of state FIN Packet drops.
1.3.6.1.4.1.1872.2.5.4.2.5.25Counter32read-onlycurrent
slbStatMaintSymSessions
OBJECT-TYPE
Total number of Symantec sessions.
1.3.6.1.4.1.1872.2.5.4.2.5.26Counter32read-onlycurrent
slbStatMaintSymValidSegments
OBJECT-TYPE
Total number of Symantec valid segments.
1.3.6.1.4.1.1872.2.5.4.2.5.27Counter32read-onlycurrent
slbStatMaintSymFragSessions
OBJECT-TYPE
Total number of Symantec fragment sessions.
1.3.6.1.4.1.1872.2.5.4.2.5.28Counter32read-onlycurrent
slbStatMaintSymSegAllocFails
OBJECT-TYPE
Total number of Symantec segment allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.5.29Counter32read-onlycurrent
slbStatMaintSymBufferAllocFails
OBJECT-TYPE
Total number of Symantec buffers allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.5.30Counter32read-onlycurrent
slbStatMaintSymConnAllocFails
OBJECT-TYPE
Total number of Symantec Connection allocation fails.
1.3.6.1.4.1.1872.2.5.4.2.5.31Counter32read-onlycurrent
slbStatMaintSymInvalidBuffers
OBJECT-TYPE
Total number of Symantec Invalid buffers.
1.3.6.1.4.1.1872.2.5.4.2.5.32Counter32read-onlycurrent
slbStatMaintSymSegReallocFails
OBJECT-TYPE
Total number of Symantec Segment reallocation fails.
1.3.6.1.4.1.1872.2.5.4.2.5.33Counter32read-onlycurrent
slbStatMaintSymPacketsIn
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Packets in.
1.3.6.1.4.1.1872.2.5.4.2.5.34Counter32read-onlycurrent
slbStatMaintSymPacketsWithNoData
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Packets with no data.
1.3.6.1.4.1.1872.2.5.4.2.5.35Counter32read-onlycurrent
slbStatMaintSymTcpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of TCP packets
1.3.6.1.4.1.1872.2.5.4.2.5.36Counter32read-onlycurrent
slbStatMaintSymUdpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of UDP Packets
1.3.6.1.4.1.1872.2.5.4.2.5.37Counter32read-onlycurrent
slbStatMaintSymIcmpPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of ICMP Packets
1.3.6.1.4.1.1872.2.5.4.2.5.38Counter32read-onlycurrent
slbStatMaintSymOtherPackets
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Packets other than TCP UDP or ICMP
1.3.6.1.4.1.1872.2.5.4.2.5.39Counter32read-onlycurrent
slbStatMaintSymMatchCount
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total Match Count
1.3.6.1.4.1.1872.2.5.4.2.5.40Counter32read-onlycurrent
slbStatMaintSymFetchErrors
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Fetch Errors
1.3.6.1.4.1.1872.2.5.4.2.5.41Counter32read-onlycurrent
slbStatMaintSymTruncPayloadToMp
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Truncated payload to MP
1.3.6.1.4.1.1872.2.5.4.2.5.42Counter32read-onlycurrent
slbStatMaintSymPacketsInFastPath
OBJECT-TYPE
Symantec Deuce Inspection Stats - Total no. of Packets in fast path
1.3.6.1.4.1.1872.2.5.4.2.5.43Counter32read-onlycurrent
filterStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.6
fltStatTable
OBJECT-TYPE
The filter statistics table.
1.3.6.1.4.1.1872.2.5.4.2.6.1not-accessiblecurrent
fltStatTableEntry
OBJECT-TYPE
A row in filter statistics table.
1.3.6.1.4.1.1872.2.5.4.2.6.1.1not-accessiblecurrent
fltStatFltIndex
OBJECT-TYPE
The number that identifies the filter.
1.3.6.1.4.1.1872.2.5.4.2.6.1.1.1Integer32read-onlycurrent
fltStatFltFirings
OBJECT-TYPE
The number of instances that the received packet matches the filter rule.
1.3.6.1.4.1.1872.2.5.4.2.6.1.1.2Counter32read-onlycurrent
gslbStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.7
gslbStatRemRealServerTable
OBJECT-TYPE
The GSLB remote real server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.1not-accessiblecurrent
gslbStatRemRealServerEntry
OBJECT-TYPE
A row in the remote real server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.1.1not-accessiblecurrent
gslbStatRemRealServerIndex
OBJECT-TYPE
The server number that identifies the remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.1.1.1Integer32read-onlycurrent
gslbStatRemRealServerDnsHandoffs
OBJECT-TYPE
The number of DNS handoffs by the remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.1.1.2Counter32read-onlycurrent
gslbStatRemRealServerHttpRedirs
OBJECT-TYPE
The number of HTTP redirections by the remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.1.1.3Counter32read-onlycurrent
gslbMaintStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.7.2
gslbStatMaintInGoodSiteUpdates
OBJECT-TYPE
The number of good DSSPv1 remote site updates received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.1Counter32read-onlycurrent
gslbStatMaintInBadSiteUpdates
OBJECT-TYPE
The number of bad remote site packets received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.2Counter32read-onlycurrent
gslbStatMaintOutSiteUpdates
OBJECT-TYPE
The number of DSSPv1 remote site updates sent.
1.3.6.1.4.1.1872.2.5.4.2.7.2.3Counter32read-onlycurrent
gslbStatMaintInGoodSiteUpdates2
OBJECT-TYPE
The number of good DSSPv2 remote site updates received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.4Counter32read-onlycurrent
gslbStatMaintOutSiteUpdates2
OBJECT-TYPE
The number of DSSPv2 remote site updates sent.
1.3.6.1.4.1.1872.2.5.4.2.7.2.5Counter32read-onlycurrent
gslbStatMaintLocalSitePers
OBJECT-TYPE
The number of local site DNS persistence cache entries added.
1.3.6.1.4.1.1872.2.5.4.2.7.2.8Counter32read-onlycurrent
gslbStatMaintInDns
OBJECT-TYPE
The number of DNS queries received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.10Counter32read-onlycurrent
gslbStatMaintInBadDns
OBJECT-TYPE
The number of bad DNS queries received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.11Counter32read-onlycurrent
gslbStatMaintOutDns
OBJECT-TYPE
The number of DNS responses sent.
1.3.6.1.4.1.1872.2.5.4.2.7.2.12Counter32read-onlycurrent
gslbStatMaintInHttp
OBJECT-TYPE
The number of HTTP requests received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.13Counter32read-onlycurrent
gslbStatMaintInBadHttp
OBJECT-TYPE
The number of bad HTTP requests received.
1.3.6.1.4.1.1872.2.5.4.2.7.2.14Counter32read-onlycurrent
gslbStatMaintOutHttp
OBJECT-TYPE
The number of HTTP responses sent.
1.3.6.1.4.1.1872.2.5.4.2.7.2.15Counter32read-onlycurrent
gslbStatMaintNoServer
OBJECT-TYPE
The number of times no server returned.
1.3.6.1.4.1.1872.2.5.4.2.7.2.16Counter32read-onlycurrent
gslbStatMaintNoDomain
OBJECT-TYPE
The number of times no matching domain.
1.3.6.1.4.1.1872.2.5.4.2.7.2.17Counter32read-onlycurrent
gslbStatMaintHostHits
OBJECT-TYPE
The number of hostname domain hits.
1.3.6.1.4.1.1872.2.5.4.2.7.2.18Counter32read-onlycurrent
gslbStatMaintRuleHits
OBJECT-TYPE
The number of network domain hits.
1.3.6.1.4.1.1872.2.5.4.2.7.2.19Counter32read-onlycurrent
gslbStatMaintVirtHits
OBJECT-TYPE
The number of basic domain hits.
1.3.6.1.4.1.1872.2.5.4.2.7.2.20Counter32read-onlycurrent
gslbStatMaintNoServerHost
OBJECT-TYPE
The number of times no server returned for hostname domain.
1.3.6.1.4.1.1872.2.5.4.2.7.2.21Counter32read-onlycurrent
gslbStatMaintNoServerRule
OBJECT-TYPE
The number of times no server returned for network domain.
1.3.6.1.4.1.1872.2.5.4.2.7.2.22Counter32read-onlycurrent
gslbStatMaintNoServerVirt
OBJECT-TYPE
The number of times no server returned for basic domain.
1.3.6.1.4.1.1872.2.5.4.2.7.2.23Counter32read-onlycurrent
gslbStatMaintLastNoResultDomain
OBJECT-TYPE
The last no result domain.
1.3.6.1.4.1.1872.2.5.4.2.7.2.24DisplayString (SIZE(0..255))read-onlycurrent
gslbStatMaintLastSrcIp
OBJECT-TYPE
The last source IP address.
1.3.6.1.4.1.1872.2.5.4.2.7.2.25IpAddressread-onlycurrent
gslbStatMaintThresholdHits
OBJECT-TYPE
The number of times any servers not returned due to threshold exceeded for the corresponding server.
1.3.6.1.4.1.1872.2.5.4.2.7.2.26Counter32read-onlycurrent
gslbStatMaintLastSrcIpV6
OBJECT-TYPE
The last source IPV6 address.
1.3.6.1.4.1.1872.2.5.4.2.7.2.27DisplayString (SIZE(0..40))read-onlycurrent
gslbStatGroupTable
OBJECT-TYPE
The GSLB group statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.3not-accessiblecurrent
gslbStatGroupEntry
OBJECT-TYPE
A row in the GSLB group statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.3.1not-accessiblecurrent
gslbStatGroupIndex
OBJECT-TYPE
The group number that identifies the real server group.
1.3.6.1.4.1.1872.2.5.4.2.7.3.1.1Integer32read-onlycurrent
gslbStatGroupDnsHandoffs
OBJECT-TYPE
The total number of DNS hand-offs sent to the remote real servers in the group.
1.3.6.1.4.1.1872.2.5.4.2.7.3.1.2Counter32read-onlycurrent
gslbStatGroupHttpRedirs
OBJECT-TYPE
The total number of HTTP redirects sent to the remote real servers in the group.
1.3.6.1.4.1.1872.2.5.4.2.7.3.1.3Counter32read-onlycurrent
gslbStatVirtServerTable
OBJECT-TYPE
The Global SLB virtual server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.4not-accessiblecurrent
gslbStatVirtServerEntry
OBJECT-TYPE
A row in the Global SLB virtual server statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1not-accessiblecurrent
gslbStatVirtServerIdx
OBJECT-TYPE
The virtual server number that identifies the virtual server.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.1Integer32read-onlycurrent
gslbStatVirtServerServiceIdx
OBJECT-TYPE
The virtual server service number that identifies the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.2Integer32read-onlycurrent
gslbStatVirtServerRserverIdx
OBJECT-TYPE
The real server number that identifies a remote site. A index of 0 indicates a local virtual server number.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.3Integer32read-onlycurrent
gslbStatVirtServerVirtPort
OBJECT-TYPE
The virtual server service port.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.4Integer32read-onlycurrent
gslbStatVirtServerIpAddress
OBJECT-TYPE
The IP address of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.5IpAddressread-onlycurrent
gslbStatVirtServerResponseTime
OBJECT-TYPE
The average time (current weight) that each service takes to respond to information exchanges with its peers The time is specified in ticks of 65 milliseconds.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.6Integer32read-onlycurrent
gslbStatVirtServerMinSessAvail
OBJECT-TYPE
The current number of sessions available for serving client requests. This number will change as client traffic loads change, or as real servers under the virtual server or remote sites go in or out of service.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.7Gauge32read-onlycurrent
gslbStatVirtServerDname
OBJECT-TYPE
The domain name of the virtual server and remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.8DisplayString (SIZE(0..64))read-onlycurrent
gslbStatVirtServerRemSite
OBJECT-TYPE
The remote site of the remote real server. For virtual server, the remote site is 0.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.9Integer32read-onlycurrent
gslbStatVirtDnsDirect
OBJECT-TYPE
The total number of DNS directs sent to the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.2.7.4.1.10Counter32read-onlycurrent
gslbStatRemSiteTable
OBJECT-TYPE
The Global SLB remote site statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.5not-accessiblecurrent
gslbStatRemSiteTableEntry
OBJECT-TYPE
A row in the Global SLB remote site statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1not-accessiblecurrent
gslbStatRemSiteIdx
OBJECT-TYPE
The remote site number that identifies the remote site.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.1Integer32read-onlycurrent
gslbStatRemSiteOutUpdates
OBJECT-TYPE
The number of DSSPv1 remote site updates sent.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.2Counter32read-onlycurrent
gslbStatRemSiteInUpdates
OBJECT-TYPE
The number of good DSSPv1 remote site updates received.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.3Counter32read-onlycurrent
gslbStatRemSiteOutUpdates2
OBJECT-TYPE
The number of DSSPv2 remote site updates sent.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.4Counter32read-onlycurrent
gslbStatRemSiteInUpdates2
OBJECT-TYPE
The number of good DSSPv2 remote site updates received.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.5Counter32read-onlycurrent
gslbStatRemSiteInBadUpdates
OBJECT-TYPE
The number of bad remote site updates received.
1.3.6.1.4.1.1872.2.5.4.2.7.5.1.6Counter32read-onlycurrent
gslbStatEnhNetworkTable
OBJECT-TYPE
The Global SLB network statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.6not-accessiblecurrent
gslbStatEnhNetworkTableEntry
OBJECT-TYPE
A row in the Global SLB network statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.6.1not-accessiblecurrent
gslbStatEnhNetworkIdx
OBJECT-TYPE
The network number that identifies the network.
1.3.6.1.4.1.1872.2.5.4.2.7.6.1.1Integer32read-onlycurrent
gslbStatEnhNetworkHit
OBJECT-TYPE
The number of times network is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.6.1.2Counter32read-onlycurrent
gslbStatRuleTable
OBJECT-TYPE
The Global SLB rule statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.7not-accessiblecurrent
gslbStatRuleTableEntry
OBJECT-TYPE
A row in the Global SLB rule statistics table.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1not-accessiblecurrent
gslbStatRuleIdx
OBJECT-TYPE
The rule number that identifies the rule.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.1Integer32read-onlycurrent
gslbStatRuleLeastconns
OBJECT-TYPE
The number of times leastconns is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.2Counter32read-onlycurrent
gslbStatRuleRoundrobin
OBJECT-TYPE
The number of times roundrobin is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.3Counter32read-onlycurrent
gslbStatRuleMinmisses
OBJECT-TYPE
The number of times minmisses is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.4Counter32read-onlycurrent
gslbStatRuleHash
OBJECT-TYPE
The number of times hash is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.5Counter32read-onlycurrent
gslbStatRuleResponse
OBJECT-TYPE
The number of times response is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.6Counter32read-onlycurrent
gslbStatRuleGeographical
OBJECT-TYPE
The number of times geographical is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.7Counter32read-onlycurrent
gslbStatRuleNetwork
OBJECT-TYPE
The number of times network is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.8Counter32read-onlycurrent
gslbStatRuleRandom
OBJECT-TYPE
The number of times random is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.9Counter32read-onlycurrent
gslbStatRuleAvailability
OBJECT-TYPE
The number of times availability is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.10Counter32read-onlycurrent
gslbStatRuleQos
OBJECT-TYPE
The number of times qos is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.11Counter32read-onlycurrent
gslbStatRulePersistence
OBJECT-TYPE
The number of times persistence is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.12Counter32read-onlycurrent
gslbStatRuleLocal
OBJECT-TYPE
The number of times local is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.13Counter32read-onlycurrent
gslbStatRuleAlways
OBJECT-TYPE
The number of times always is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.14Counter32read-onlycurrent
gslbStatRuleRemote
OBJECT-TYPE
The number of times remote is used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.15Counter32read-onlycurrent
gslbStatRuleTotal
OBJECT-TYPE
The number of times all the metrics are used.
1.3.6.1.4.1.1872.2.5.4.2.7.7.1.16Counter32read-onlycurrent
gslbStatGeo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.7.8
gslbStatGeoNA
OBJECT-TYPE
The number of times North America is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.1Counter32read-onlycurrent
gslbStatGeoSA
OBJECT-TYPE
The number of times South America is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.2Counter32read-onlycurrent
gslbStatGeoEU
OBJECT-TYPE
The number of times Europe is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.3Counter32read-onlycurrent
gslbStatGeoCA
OBJECT-TYPE
The number of times Caribbean is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.4Counter32read-onlycurrent
gslbStatGeoPR
OBJECT-TYPE
The number of times Pacific Rim is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.5Counter32read-onlycurrent
gslbStatGeoSS
OBJECT-TYPE
The number of times Sub-Sahara is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.6Counter32read-onlycurrent
gslbStatGeoJP
OBJECT-TYPE
The number of times Japan is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.7Counter32read-onlycurrent
gslbStatGeoTotal
OBJECT-TYPE
The number of times any of the regions are selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.8Counter32read-onlycurrent
gslbStatGeoAF
OBJECT-TYPE
The number of times Africa is selected.
1.3.6.1.4.1.1872.2.5.4.2.7.8.9Counter32read-onlycurrent
gslbStatPers
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.7.9
gslbStatPersCurrent
OBJECT-TYPE
The current number of entries in the DNS persistence cache.
1.3.6.1.4.1.1872.2.5.4.2.7.9.1Counter32read-onlycurrent
gslbStatPersHiwat
OBJECT-TYPE
The highest number of entries recorded in the DNS persistence cache.
1.3.6.1.4.1.1872.2.5.4.2.7.9.2Counter32read-onlycurrent
gslbStatPersMax
OBJECT-TYPE
The maximum number of entries supported in the DNS persistence cache.
1.3.6.1.4.1.1872.2.5.4.2.7.9.3Counter32read-onlycurrent
wapStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.8
radiusAcctReqsStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.8.1
radiusAcctReqs
OBJECT-TYPE
Radius Account Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.1Counter32read-onlycurrent
radiusAcctWrapReqs
OBJECT-TYPE
Radius Account Wrap Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.2Counter32read-onlycurrent
radiusAcctStartReqs
OBJECT-TYPE
Radius Account Start Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.3Counter32read-onlycurrent
radiusAcctUpdateReqs
OBJECT-TYPE
Radius Account Update Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.4Counter32read-onlycurrent
radiusAcctStopReqs
OBJECT-TYPE
Radius Account stop Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.5Counter32read-onlycurrent
radiusAcctBadReqs
OBJECT-TYPE
Radius Account Bad Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.6Counter32read-onlycurrent
radiusAcctAddSessionReqs
OBJECT-TYPE
Radius Account add session Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.7Counter32read-onlycurrent
radiusAcctDeleteSessionReqs
OBJECT-TYPE
Radius Account delete session Request.
1.3.6.1.4.1.1872.2.5.4.2.8.1.8Counter32read-onlycurrent
radiusAcctReqFailsSPDead
OBJECT-TYPE
Radius Account request fails SP Dead.
1.3.6.1.4.1.1872.2.5.4.2.8.1.10Counter32read-onlycurrent
radiusAcctReqFailsDMAFails
OBJECT-TYPE
Radius Account request fails DMA fails.
1.3.6.1.4.1.1872.2.5.4.2.8.1.11Counter32read-onlycurrent
radiusAcctReqWithFramedIp
OBJECT-TYPE
Radius Account request containing the FRAMED_IP field.
1.3.6.1.4.1.1872.2.5.4.2.8.1.12Counter32read-onlycurrent
radiusAcctReqWithoutFramedIp
OBJECT-TYPE
Radius Account request not containing the FRAMED_IP field.
1.3.6.1.4.1.1872.2.5.4.2.8.1.13Counter32read-onlycurrent
tpcpAddSessReqsStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.8.2
tpcpAddSessReqs
OBJECT-TYPE
WAP add Session requests.
1.3.6.1.4.1.1872.2.5.4.2.8.2.1Counter32read-onlycurrent
tpcpAddSessReqsFailsSPDead
OBJECT-TYPE
WAP add Session Fails as the SP is dead.
1.3.6.1.4.1.1872.2.5.4.2.8.2.3Counter32read-onlycurrent
tpcpDeleteSessReqsStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.8.3
tpcpDeleteSessReqs
OBJECT-TYPE
TPCP Delete Session Requests.
1.3.6.1.4.1.1872.2.5.4.2.8.3.1Counter32read-onlycurrent
tpcpDeleteSessReqsFailsSPDead
OBJECT-TYPE
TPCP Delete Session Fails as the SP is dead.
1.3.6.1.4.1.1872.2.5.4.2.8.3.3Counter32read-onlycurrent
wapRequestToWrongSP
OBJECT-TYPE
The WAP delete Session Entries sent to wrong SP.
1.3.6.1.4.1.1872.2.5.4.2.8.4Counter32read-onlycurrent
ftpStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.10
ftpSlbStatTotal
OBJECT-TYPE
The number of times the switch receives both active and passive FTP connections.
1.3.6.1.4.1.1872.2.5.4.2.10.1Counter32read-onlycurrent
ftpNatStatTotal
OBJECT-TYPE
The number of times the switch receives the 'port' command from the client.
1.3.6.1.4.1.1872.2.5.4.2.10.2Counter32read-onlycurrent
ftpStatActiveNatIndex
OBJECT-TYPE
The number of times the switch creates a new index due to 'port' command from the client.
1.3.6.1.4.1.1872.2.5.4.2.10.3Counter32read-onlycurrent
ftpStatNatAckSeqDiff
OBJECT-TYPE
The difference in the numbers of ACK and SEQ that the switch needs for packet adjustment.
1.3.6.1.4.1.1872.2.5.4.2.10.4Counter32read-onlycurrent
ftpStatSlbParseIndex
OBJECT-TYPE
The number of times the switch creates a new index in response to the 'pasv' command from the client.
1.3.6.1.4.1.1872.2.5.4.2.10.5Counter32read-onlycurrent
ftpStatSlbParseAckSeqDiff
OBJECT-TYPE
The difference in the numbers of ACK and SEQ that the switch needs for FTP SLB parsing.
1.3.6.1.4.1.1872.2.5.4.2.10.6Counter32read-onlycurrent
ftpStatModeSwitchError
OBJECT-TYPE
The number of times the switch is not able to switch modes from active to passive and vice versa.
1.3.6.1.4.1.1872.2.5.4.2.10.7Counter32read-onlycurrent
rtspStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.11
rtspStatControlConns
OBJECT-TYPE
Total number of active RTSP control connections.
1.3.6.1.4.1.1872.2.5.4.2.11.1Counter32read-onlycurrent
rtspStatUDPStreams
OBJECT-TYPE
Total number of active UDP streams.
1.3.6.1.4.1.1872.2.5.4.2.11.2Counter32read-onlycurrent
rtspStatRedirects
OBJECT-TYPE
Total number of switch redirects.
1.3.6.1.4.1.1872.2.5.4.2.11.3Counter32read-onlycurrent
rtspStatConnDenied
OBJECT-TYPE
Total connections denied due to RTSP connection limit.
1.3.6.1.4.1.1872.2.5.4.2.11.4Counter32read-onlycurrent
rtspStatAllocFails
OBJECT-TYPE
Total cases of heap memory allocation failures.
1.3.6.1.4.1.1872.2.5.4.2.11.5Counter32read-onlycurrent
rtspStatBufferAllocs
OBJECT-TYPE
The total number of buffer allocations used.
1.3.6.1.4.1.1872.2.5.4.2.11.6Gauge32read-onlycurrent
tcpLimitStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.12
tcpLimitStatHoldDowns
OBJECT-TYPE
Total number of client hold downs triggered.
1.3.6.1.4.1.1872.2.5.4.2.12.1Counter32read-onlycurrent
tcpLimitStatClientEntries
OBJECT-TYPE
Current number of TCP rate limiting per-client state entries.
1.3.6.1.4.1.1872.2.5.4.2.12.2Gauge32read-onlycurrent
udpLimitStatHoldDowns
OBJECT-TYPE
Total number of UDP client hold downs triggered.
1.3.6.1.4.1.1872.2.5.4.2.12.3Counter32read-onlycurrent
icmpLimitStatHoldDowns
OBJECT-TYPE
Total number of ICMP client hold downs triggered.
1.3.6.1.4.1.1872.2.5.4.2.12.4Counter32read-onlycurrent
udpLimitStatClientEntries
OBJECT-TYPE
Current number of UDP rate limiting per-client state entries.
1.3.6.1.4.1.1872.2.5.4.2.12.5Counter32read-onlycurrent
icmpLimitStatClientEntries
OBJECT-TYPE
Current number of ICMP rate limiting per-client state entries.
1.3.6.1.4.1.1872.2.5.4.2.12.6Counter32read-onlycurrent
dnsSlbStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.13
dnsSlbStatTCPQueries
OBJECT-TYPE
Total number of TCP DNS queries.
1.3.6.1.4.1.1872.2.5.4.2.13.1Counter32read-onlycurrent
dnsSlbStatUDPQueries
OBJECT-TYPE
Total number of UDP DNS queries.
1.3.6.1.4.1.1872.2.5.4.2.13.2Counter32read-onlycurrent
dnsSlbStatInvalidQueries
OBJECT-TYPE
Total number of invalid DNS queries.
1.3.6.1.4.1.1872.2.5.4.2.13.3Counter32read-onlycurrent
dnsSlbStatMultipleQueries
OBJECT-TYPE
Total number of multiple DNS queries.
1.3.6.1.4.1.1872.2.5.4.2.13.4Counter32read-onlycurrent
dnsSlbStatDnameParseErrors
OBJECT-TYPE
Total number of domain name parse errors.
1.3.6.1.4.1.1872.2.5.4.2.13.5Counter32read-onlycurrent
dnsSlbStatFailedMatches
OBJECT-TYPE
Total number of failed real server name matches.
1.3.6.1.4.1.1872.2.5.4.2.13.6Counter32read-onlycurrent
dnsSlbStatInternalErrors
OBJECT-TYPE
Total number of DNS parsing internal errors.
1.3.6.1.4.1.1872.2.5.4.2.13.7Counter32read-onlycurrent
slbStatsClear
OBJECT-TYPE
This is an action object to clear the non-operational SLB statistics. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.5.4.2.15INTEGER {ok(1), clear(2)}read-writecurrent
sslSlbStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.16
sslSlbStatSessIdAllocFails
OBJECT-TYPE
The number of times allocation of a session table entry failed when attempting to store a SessionId in the table.
1.3.6.1.4.1.1872.2.5.4.2.16.1Counter32read-onlycurrent
sslSlbStatCurSessions
OBJECT-TYPE
The current number of different TCP sessions using SSL service.
1.3.6.1.4.1.1872.2.5.4.2.16.2Gauge32read-onlycurrent
sslSlbStatTotalSessions
OBJECT-TYPE
The total number of different TCP sessions using SSL service.
1.3.6.1.4.1.1872.2.5.4.2.16.3Counter32read-onlycurrent
sslSlbStatHighestSessions
OBJECT-TYPE
The high water mark of current sessions of different TCP sessions using SSL service.
1.3.6.1.4.1.1872.2.5.4.2.16.4Counter32read-onlycurrent
sslSlbStatUniqCurSessions
OBJECT-TYPE
The current number of unique SSL sessions seen on the switch.
1.3.6.1.4.1.1872.2.5.4.2.16.5Gauge32read-onlycurrent
sslSlbStatUniqTotalSessions
OBJECT-TYPE
The total number of unique SSL sessions seen on the switch.
1.3.6.1.4.1.1872.2.5.4.2.16.6Counter32read-onlycurrent
sslSlbStatUniqHighestSessions
OBJECT-TYPE
The high water mark of unique SSL sessions seen on the switch.
1.3.6.1.4.1.1872.2.5.4.2.16.7Counter32read-onlycurrent
sslSlbStatPersistPortCurSessions
OBJECT-TYPE
The current number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
1.3.6.1.4.1.1872.2.5.4.2.16.8Gauge32read-onlycurrent
sslSlbStatPersistPortTotalSessions
OBJECT-TYPE
The total number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
1.3.6.1.4.1.1872.2.5.4.2.16.9Counter32read-onlycurrent
sslSlbStatPersistPortHighestSessions
OBJECT-TYPE
The high water mask of SessionIds maintained on SP 4, to allow for persistence across different client ports.
1.3.6.1.4.1.1872.2.5.4.2.16.10Counter32read-onlycurrent
sslOffNewHandShake
OBJECT-TYPE
Number of new SSL handshakes between clients and AAS per second.
1.3.6.1.4.1.1872.2.5.4.2.16.11Integer32read-onlycurrent
sslOffReusedHandShake
OBJECT-TYPE
Number of existing SSL handshakes reused by clients to communicate with AAS per second.
1.3.6.1.4.1.1872.2.5.4.2.16.12Integer32read-onlycurrent
sslOffPerReusedHandShake
OBJECT-TYPE
Percentage of SSL session re-using keys.
1.3.6.1.4.1.1872.2.5.4.2.16.13Integer32read-onlycurrent
sslOffPercSessUsingSSLv2
OBJECT-TYPE
Percentage of session using SSLv2 out of all session during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.16.14Integer32read-onlycurrent
sslOffPercSessUsingSSLv3
OBJECT-TYPE
Percentage of session using SSLv3 out of all session during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.16.15INTEGERread-onlycurrent
sslOffPercSessUsingTLS
OBJECT-TYPE
Percentage of session using TLS1.0 out of all session during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.16.16INTEGERread-onlycurrent
sslOffPerServStatsTable
OBJECT-TYPE
A table for SSL statistics per virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17not-accessiblecurrent
sslOffPerServStatsEntry
OBJECT-TYPE
The row definition for SSL statistics per virtual service table.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1not-accessiblecurrent
sslOffPerServVirtServIndex
OBJECT-TYPE
Virtual server number.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.1Integer32read-onlycurrent
sslOffPerServVirtServiceIndex
OBJECT-TYPE
Virtual server service index.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.2Integer32read-onlycurrent
sslOffPerServVirtServPort
OBJECT-TYPE
Virtual server service port number.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.3Integer32read-onlycurrent
sslOffPerServSslPolId
OBJECT-TYPE
SSL policy identifier associated with the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.4DisplayStringread-onlycurrent
sslOffPerServNewhandShake
OBJECT-TYPE
Number of New SSL handshakes between Clients and AAS per second for this virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.5Integer32read-onlycurrent
sslOffPerServReusedhandShake
OBJECT-TYPE
Number of existing SSL handshakes re-used by clients to communicate with AAS per second for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.6Integer32read-onlycurrent
sslOffPerServPercReusedhandShake
OBJECT-TYPE
Percentage of SSL session re-using keys for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.7Integer32read-onlycurrent
sslOffPerServSessUsingSSLv2
OBJECT-TYPE
Percentage of session using SSLv2 out of all session during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.8Integer32read-onlycurrent
sslOffPerServSessUsingSSLv3
OBJECT-TYPE
Percentage of session using SSLv3 out of all session during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.9Integer32read-onlycurrent
sslOffPerServSessUsingTLS
OBJECT-TYPE
Percentage of session using TLS1.0 out of all session during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.10Integer32read-onlycurrent
sslOffPerServSessUsingTLS11
OBJECT-TYPE
Percentage of session using TLS1.1 out of all session during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.16.17.1.11Integer32read-onlycurrent
sslOffPercSessUsingTLS11
OBJECT-TYPE
Percentage of session using TLS1.1 out of all session during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.16.18INTEGERread-onlycurrent
slbStatAuxSessTable
OBJECT-TYPE
The auxiliary session table statistics.
1.3.6.1.4.1.1872.2.5.4.2.17not-accessiblecurrent
slbStatAuxSessEntry
OBJECT-TYPE
The statistics of a particular auxiliary session table entry.
1.3.6.1.4.1.1872.2.5.4.2.17.1not-accessiblecurrent
slbStatAuxSessIndex
OBJECT-TYPE
The auxiliary session table number.
1.3.6.1.4.1.1872.2.5.4.2.17.1.1Integer32read-onlycurrent
slbStatAuxSessCurConn
OBJECT-TYPE
The number of connections in this auxiliary sessions table.
1.3.6.1.4.1.1872.2.5.4.2.17.1.2Gauge32read-onlycurrent
slbStatAuxSessMaxConn
OBJECT-TYPE
The maximum number of connections handled by this auxiliary session table.
1.3.6.1.4.1.1872.2.5.4.2.17.1.3Integer32read-onlycurrent
slbStatAuxSessAllocFails
OBJECT-TYPE
The total number of allocation failures for this auxiliary session table.
1.3.6.1.4.1.1872.2.5.4.2.17.1.4Counter32read-onlycurrent
slbStatVirtServiceTable
OBJECT-TYPE
The virtual service statistics table.
1.3.6.1.4.1.1872.2.5.4.2.18not-accessiblecurrent
slbStatVirtServiceEntry
OBJECT-TYPE
The statistics of a particular virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1not-accessiblecurrent
slbStatVirtServerIndex
OBJECT-TYPE
The virtual server number that identifies the service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.1Integer32read-onlycurrent
slbStatVirtServiceIndex
OBJECT-TYPE
The virtual service number that identifies the service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.2Integer32read-onlycurrent
slbStatRealServerIndex
OBJECT-TYPE
The real server index.
1.3.6.1.4.1.1872.2.5.4.2.18.1.3Integer32read-onlycurrent
slbStatVirtServiceCurrSessions
OBJECT-TYPE
The number of sessions that are currently handled by the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.4Gauge32read-onlycurrent
slbStatVirtServiceTotalSessions
OBJECT-TYPE
The total number of sessions that are handled by the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.5Counter32read-onlycurrent
slbStatVirtServiceHighestSessions
OBJECT-TYPE
The highest sessions that have been handled by the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.6Counter32read-onlycurrent
slbStatVirtServiceHCOctetsLow32
OBJECT-TYPE
The lower 32 bit value of octets received and transmitted out of the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.7Counter32read-onlycurrent
slbStatVirtServiceHCOctetsHigh32
OBJECT-TYPE
The higher 32 bit value of octets received and transmitted out of the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.8Counter32read-onlycurrent
slbStatVirtServiceHCOctets
OBJECT-TYPE
The total octets received and transmitted by the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.18.1.9Counter64read-onlycurrent
sipStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.20
sipTotalClientParseErrors
OBJECT-TYPE
Total number of SIP Client parse Errors.
1.3.6.1.4.1.1872.2.5.4.2.20.1Counter32read-onlycurrent
sipTotalServerParseErrors
OBJECT-TYPE
Total number of SIP Server parse Errors.
1.3.6.1.4.1.1872.2.5.4.2.20.2Counter32read-onlycurrent
sipTotalUnknownMethodReq
OBJECT-TYPE
Total number of SIP unknown method requests.
1.3.6.1.4.1.1872.2.5.4.2.20.3Counter32read-onlycurrent
sipTotalIncompleteMsgs
OBJECT-TYPE
Total number of SIP Incomplete messages.
1.3.6.1.4.1.1872.2.5.4.2.20.4Counter32read-onlycurrent
sipTotalSdpNatPackets
OBJECT-TYPE
Total number of SDP NAT packets.
1.3.6.1.4.1.1872.2.5.4.2.20.5Counter32read-onlycurrent
wlmStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.21
slbStatWlmTable
OBJECT-TYPE
The WLM statistics table.
1.3.6.1.4.1.1872.2.5.4.2.21.1not-accessiblecurrent
slbStatWlmEntry
OBJECT-TYPE
The statistics of a particular work load manager.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1not-accessiblecurrent
slbStatWlmIndex
OBJECT-TYPE
The work load manager number.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.1Integer32read-onlycurrent
slbStatWlmRegReq
OBJECT-TYPE
Total number of registration request messages sent by the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.2Counter32read-onlycurrent
slbStatWlmRegRep
OBJECT-TYPE
Total number of registration replies received from the GWM.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.3Counter32read-onlycurrent
slbStatWlmRegRepErr
OBJECT-TYPE
Total number of registration replies received where the return code indicates an error.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.4Counter32read-onlycurrent
slbStatWlmDeregReq
OBJECT-TYPE
Total number of deregistration request messages sent by the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.5Counter32read-onlycurrent
slbStatWlmDeregRep
OBJECT-TYPE
Total number of deregistration replies received from the GWM.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.6Counter32read-onlycurrent
slbStatWlmDeregRepErr
OBJECT-TYPE
Total number of deregistration replies received where the return code flag set indicating an error in processing of the deregistration request.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.7Counter32read-onlycurrent
slbStatWlmLbStateReq
OBJECT-TYPE
Total number of set LB state request messages sent by the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.8Counter32read-onlycurrent
slbStatWlmLbStateRep
OBJECT-TYPE
Total number of set LB state replies received from the GWM.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.9Counter32read-onlycurrent
slbStatWlmLbStateRepErr
OBJECT-TYPE
Total number of set LB state replies received where the return code code flag set indicating an error in processing of the set LB state request.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.10Counter32read-onlycurrent
slbStatWlmMembStateReq
OBJECT-TYPE
Total number of set member state request messages sent by the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.11Counter32read-onlycurrent
slbStatWlmMembStateRep
OBJECT-TYPE
Total number of set member state replies received from the GWM.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.12Counter32read-onlycurrent
slbStatWlmMembStateRepErr
OBJECT-TYPE
Total number of set member state replies received where the return code code flag set indicating an error in processing of the set member state request.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.13Counter32read-onlycurrent
slbStatWlmWtMsgRecv
OBJECT-TYPE
Total number of weight updates received from the GWM.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.14Counter32read-onlycurrent
slbStatWlmWtMsgParErr
OBJECT-TYPE
Total number of errorsencountered during parsing of the send weights message.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.15Counter32read-onlycurrent
slbStatWlmTotInvalidLb
OBJECT-TYPE
This counter is incremented when the LB name in send weights message does not match the switch LB name.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.16Counter32read-onlycurrent
slbStatWlmTotInvalidGrp
OBJECT-TYPE
This counter is incremented when the group name in send weights message does not match with any of the groups configured on the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.17Counter32read-onlycurrent
slbStatWlmTotInvalidRealSer
OBJECT-TYPE
This counter is incremented when the real server name in send weights message does not match with any of the reals configured on the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.18Counter32read-onlycurrent
slbStatWlmMsgInvalidSASPHeader
OBJECT-TYPE
Total number of messages received from the GWM with invalid headers.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.19Counter32read-onlycurrent
slbStatWlmMsgParseErr
OBJECT-TYPE
Total number of parse errors.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.20Counter32read-onlycurrent
slbStatWlmMsgUnsupMsgType
OBJECT-TYPE
Total messages received where the message type is not supported by the switch.
1.3.6.1.4.1.1872.2.5.4.2.21.1.1.21Counter32read-onlycurrent
sessMirrorStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.22
sessMirrorTotalCreateSessionMsgRx
OBJECT-TYPE
Total number of create session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.1Counter32read-onlycurrent
sessMirrorTotalCreateSessionMsgTx
OBJECT-TYPE
Total number of create session messages transmitted .
1.3.6.1.4.1.1872.2.5.4.2.22.2Counter32read-onlycurrent
sessMirrorTotalCreateDataSessionMsgRx
OBJECT-TYPE
Total number of create data session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.3Counter32read-onlycurrent
sessMirrorTotalCreateDataSessionMsgTx
OBJECT-TYPE
Total number of create data session messages transmitted.
1.3.6.1.4.1.1872.2.5.4.2.22.4Counter32read-onlycurrent
sessMirrorTotalUpdateSessionMsgRx
OBJECT-TYPE
Total number of update session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.5Counter32read-onlycurrent
sessMirrorTotalUpdateSessionMsgTx
OBJECT-TYPE
Total number of update session messages transmitted.
1.3.6.1.4.1.1872.2.5.4.2.22.6Counter32read-onlycurrent
sessMirrorTotalUpdateDataSessionMsgRx
OBJECT-TYPE
Total number of update data session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.7Counter32read-onlycurrent
sessMirrorTotalUpdateDataSessionMsgTx
OBJECT-TYPE
Total number of update data session messages transmitted.
1.3.6.1.4.1.1872.2.5.4.2.22.8Counter32read-onlycurrent
sessMirrorTotalDeleteSessionMsgRx
OBJECT-TYPE
Total number of delete session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.9Counter32read-onlycurrent
sessMirrorTotalDeleteSessionMsgTx
OBJECT-TYPE
Total number of delete session messages transmitted.
1.3.6.1.4.1.1872.2.5.4.2.22.10Counter32read-onlycurrent
sessMirrorTotalDeleteDataSessionMsgRx
OBJECT-TYPE
Total number of delete data session messages received.
1.3.6.1.4.1.1872.2.5.4.2.22.11Counter32read-onlycurrent
sessMirrorTotalDeleteDataSessionMsgTx
OBJECT-TYPE
Total number of delete data session messages transmitted.
1.3.6.1.4.1.1872.2.5.4.2.22.12Counter32read-onlycurrent
sessMirrorTotalSessionsCreated
OBJECT-TYPE
Total number of sessions created.
1.3.6.1.4.1.1872.2.5.4.2.22.13Counter32read-onlycurrent
sessMirrorTotalDataSessionsCreated
OBJECT-TYPE
Total number of data sessions created.
1.3.6.1.4.1.1872.2.5.4.2.22.14Counter32read-onlycurrent
sessMirrorTotalSessionsUpdated
OBJECT-TYPE
Total number of sessions updated.
1.3.6.1.4.1.1872.2.5.4.2.22.15Counter32read-onlycurrent
sessMirrorTotalDataSessionsUpdated
OBJECT-TYPE
Total number of data sessions updated.
1.3.6.1.4.1.1872.2.5.4.2.22.16Counter32read-onlycurrent
sessMirrorTotalSessionsDeleted
OBJECT-TYPE
Total number of sessions deleted.
1.3.6.1.4.1.1872.2.5.4.2.22.17Counter32read-onlycurrent
sessMirrorTotalDataSessionsDeleted
OBJECT-TYPE
Total number of data sessions deleted.
1.3.6.1.4.1.1872.2.5.4.2.22.18Counter32read-onlycurrent
sessMirrorSessionTableFullErr
OBJECT-TYPE
Error indicates session table full.
1.3.6.1.4.1.1872.2.5.4.2.22.19Counter32read-onlycurrent
sessMirrorNoPortErr
OBJECT-TYPE
Error indicates unavailable port.
1.3.6.1.4.1.1872.2.5.4.2.22.20Counter32read-onlycurrent
sessMirrorSessionPresentErr
OBJECT-TYPE
Error indicates session already present.
1.3.6.1.4.1.1872.2.5.4.2.22.21Counter32read-onlycurrent
sessMirrorSessionNotFoundErr
OBJECT-TYPE
Error indicates session not found.
1.3.6.1.4.1.1872.2.5.4.2.22.22Counter32read-onlycurrent
sessMirrorCtrlSessionNotFoundErr
OBJECT-TYPE
Error indicates control session not found.
1.3.6.1.4.1.1872.2.5.4.2.22.23Counter32read-onlycurrent
accelStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.23
cachStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.23.1
cachStatSummTotObj
OBJECT-TYPE
Number of Objects served by cache within the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.1.1Integer32read-onlycurrent
cachStatSummHitPerc
OBJECT-TYPE
Percent of HTTP requests served by objects from cache.
1.3.6.1.4.1.1872.2.5.4.2.23.1.2Integer32read-onlycurrent
cachStatSummServRate
OBJECT-TYPE
Rate of requests served by cache every second.
1.3.6.1.4.1.1872.2.5.4.2.23.1.3Integer32read-onlycurrent
cachStatSummNewCachedObj
OBJECT-TYPE
Amount of new objects cached during the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.1.4Integer32read-onlycurrent
cachStatSummRateNewCachedObj
OBJECT-TYPE
Average number of new objects cached every second.
1.3.6.1.4.1.1872.2.5.4.2.23.1.5Integer32read-onlycurrent
cachStatSummNewCachedBytes
OBJECT-TYPE
Amount of new bytes cached during the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.1.6Integer32read-onlycurrent
cachStatSummRateNewCachedBytes
OBJECT-TYPE
Average number of new bytes cached every second.
1.3.6.1.4.1.1872.2.5.4.2.23.1.7Integer32read-onlycurrent
cachStatSummObjSmaller10K
OBJECT-TYPE
Amount of objects cached during last measuring period of size smaller than 10KB.
1.3.6.1.4.1.1872.2.5.4.2.23.1.8Integer32read-onlycurrent
cachStatSummObj11KTO50K
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 11KB and 50KB.
1.3.6.1.4.1.1872.2.5.4.2.23.1.9Integer32read-onlycurrent
cachStatSummObj51KTO100K
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 51KB and 100KB.
1.3.6.1.4.1.1872.2.5.4.2.23.1.10Integer32read-onlycurrent
cachStatSummObj101KTO1M
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 101KB and 1MB.
1.3.6.1.4.1.1872.2.5.4.2.23.1.11Integer32read-onlycurrent
cachStatSummObjLarger1M
OBJECT-TYPE
Amount of objects cached during last measuring period of size larger than 1MB.
1.3.6.1.4.1.1872.2.5.4.2.23.1.12Integer32read-onlycurrent
cachPerServStatTable
OBJECT-TYPE
A table for cache statistics per virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13not-accessiblecurrent
cachPerServStatEntry
OBJECT-TYPE
The row definition for cache statistics per virtual service table.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1not-accessiblecurrent
cachStatPerServVirtServIndex
OBJECT-TYPE
Virtual server index.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.1Integer32read-writecurrent
cachStatPerServVirtServiceIndex
OBJECT-TYPE
Virtual server service index.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.2Integer32read-writecurrent
cachStatPerServVirtServPort
OBJECT-TYPE
Virtual server service port number.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.3Integer32read-writecurrent
cachStatPerServCachePolId
OBJECT-TYPE
Cache policy identifier associated with the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.4DisplayStringread-onlycurrent
cachStatPerServTotObj
OBJECT-TYPE
Number of objects served by cache during the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.5Integer32read-onlycurrent
cachStatPerServHitPerc
OBJECT-TYPE
Percent of HTTP requests served by objects from cache for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.6Integer32read-onlycurrent
cachStatPerServServRate
OBJECT-TYPE
Rate of requests served by cache every second for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.7Integer32read-onlycurrent
cachStatPerServNewCachedObj
OBJECT-TYPE
Amount of new objects cached during the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.8Integer32read-onlycurrent
cachStatPerServRateNewCachedObj
OBJECT-TYPE
Average number of new objects cached every second for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.9Integer32read-onlycurrent
cachStatPerServNewCachedBytes
OBJECT-TYPE
Amount of new bytes cached during the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.10Integer32read-onlycurrent
cachStatPerServRateNewCachedBytes
OBJECT-TYPE
Average number of new bytes cached every second for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.11Integer32read-onlycurrent
cachStatPerServObjSmaller10K
OBJECT-TYPE
Amount of objects cached during last measuring period of size smaller than 10KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.12Integer32read-onlycurrent
cachStatPerServObj11KTO50K
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 11KB and 50KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.13Integer32read-onlycurrent
cachStatPerServObj51KTO100K
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 51KB and 100KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.14Integer32read-onlycurrent
cachStatPerServObj101KTO1M
OBJECT-TYPE
Amount of objects cached during last measuring period of size between 101KB and 1MB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.15Integer32read-onlycurrent
cachStatPerServObjLarger1M
OBJECT-TYPE
Amount of objects cached during last measuring period of size larger than 1MB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.16Integer32read-onlycurrent
cachPerRuleListStatsTable
OBJECT-TYPE
A table for cache statistics per rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14not-accessiblecurrent
cachPerRuleListStatsEntry
OBJECT-TYPE
The row definition for cache statistics per rule list table.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1not-accessiblecurrent
cachRuleListIndex
OBJECT-TYPE
Cache rule list index.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.1Integer32read-onlycurrent
cachRuleListId
OBJECT-TYPE
Cache rule list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.2DisplayStringread-onlycurrent
cachRuleListNumOfObjCac
OBJECT-TYPE
Number of objects cached by this rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.3Integer32read-onlycurrent
cachRuleListNumOfBytesCac
OBJECT-TYPE
Number of bytes cached by this rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.4Integer32read-onlycurrent
cachPerRuleStatsTable
OBJECT-TYPE
A table for cache statistics per rule.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15not-accessiblecurrent
cachPerRuleStatsEntry
OBJECT-TYPE
The row definition for cache statistics per rule table.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1not-accessiblecurrent
cachRuleRuleListIndex
OBJECT-TYPE
Cache rule rule-list index.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.1Integer32read-onlycurrent
cachRuleIndex
OBJECT-TYPE
Cache rule number.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.2Integer32read-onlycurrent
cachRuleRuleListId
OBJECT-TYPE
Cache rule rule-list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.3DisplayStringread-onlycurrent
cachRuleNumOfObjCac
OBJECT-TYPE
Number of objects cached by the rule.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.4Integer32read-onlycurrent
cachRuleNumOfBytesCac
OBJECT-TYPE
Number of bytes cached by the rule.
1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.5Integer32read-onlycurrent
compStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.23.2
compUnCompressedThrputKB
OBJECT-TYPE
Total throughput of compressible object before compression counted during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.1Integer32read-onlycurrent
compAvgSizeBefCompKB
OBJECT-TYPE
Average object size before compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.2Integer32read-onlycurrent
compCompressedThrputKB
OBJECT-TYPE
Total throughput of compressible objects after compression counted during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.3Integer32read-onlycurrent
compAvgSizeAftCompKB
OBJECT-TYPE
Average object size after compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.4Integer32read-onlycurrent
compAvgCompRatio
OBJECT-TYPE
Average compression ratio during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.5Integer32read-onlycurrent
compThrputCompRatio
OBJECT-TYPE
Effective compression ratio out of total traffic.
1.3.6.1.4.1.1872.2.5.4.2.23.2.6Integer32read-onlycurrent
compStatPerServTable
OBJECT-TYPE
A table for compression statistics per virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7not-accessiblecurrent
compStatPerServEntry
OBJECT-TYPE
The row definition for compression statistics per virtual service table.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1not-accessiblecurrent
compStatPerServVirtServIndex
OBJECT-TYPE
Virtual server number.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.1Integer32read-writecurrent
compStatPerServVirtServiceIndex
OBJECT-TYPE
Virtual server service index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.2Integer32read-writecurrent
compStatPerServVirtServPort
OBJECT-TYPE
Virtual server service port number.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.3Integer32read-writecurrent
compStatPerServCompPolId
OBJECT-TYPE
Compression policy identifier associated with the virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.4DisplayStringread-onlycurrent
compStatPerServUnComprTputKb
OBJECT-TYPE
Total throughput of compressible object before compression counted during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.5Integer32read-onlycurrent
compStatPerServComprTputKb
OBJECT-TYPE
Total throughput of compressible objects after compression counted during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.6Integer32read-onlycurrent
compStatPerServAvgSizeBefComp
OBJECT-TYPE
Average object size before compression for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.7Integer32read-onlycurrent
compStatPerServAvgSizeAftComp
OBJECT-TYPE
Average object size after compression for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.8Integer32read-onlycurrent
compStatPerServAvgCompRatio
OBJECT-TYPE
Average compression ratio during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.9Integer32read-onlycurrent
compStatPerServThrputCompRatio
OBJECT-TYPE
Effective compression ratio out of total traffic for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.10Integer32read-onlycurrent
compPerBrowRuleListStatsTable
OBJECT-TYPE
A table for compression statistics per rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8not-accessiblecurrent
compPerBrowRuleListStatsEntry
OBJECT-TYPE
The row definition for compression statistics per rule list table.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1not-accessiblecurrent
compBrowRuleListIndex
OBJECT-TYPE
Compression browsing rule list index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.1Integer32read-onlycurrent
compBrowRuleListId
OBJECT-TYPE
Compression browsing rule list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.2DisplayStringread-onlycurrent
compBrowRuleListNumOfObj
OBJECT-TYPE
Number of objects matched by this rule-list during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.3Integer32read-onlycurrent
compBrowRuleListSizeBefComp
OBJECT-TYPE
Total size of all matched objects by this browser rule-list before compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.4Integer32read-onlycurrent
compBrowRuleListSizeAftComp
OBJECT-TYPE
Total size of all matched objects by this browser rule-list after compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.5Integer32read-onlycurrent
compBrowRuleListCompRatio
OBJECT-TYPE
Compression ratio per rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.6Integer32read-onlycurrent
compPerBrowRuleStatsTable
OBJECT-TYPE
A table for compression statistics per browser rule.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9not-accessiblecurrent
compPerBrowRuleStatsEntry
OBJECT-TYPE
The row definition for compression statistics per browser rule.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1not-accessiblecurrent
compBrowRuleRuleListIndex
OBJECT-TYPE
Compression browser rule rule-list index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.1Integer32read-onlycurrent
compBrowRuleIndex
OBJECT-TYPE
Compression browser rule index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.2Integer32read-onlycurrent
compBrowRuleRuleListId
OBJECT-TYPE
Compression browser rule rule-list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.3DisplayStringread-onlycurrent
compBrowRuleNumOfObj
OBJECT-TYPE
Number of objects matched by this browser rule during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.4Integer32read-onlycurrent
compBrowRuleSizeBefComp
OBJECT-TYPE
Total size of all matched objects for this browser rule before compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.5Integer32read-onlycurrent
compBrowRuleSizeAftComp
OBJECT-TYPE
Total size of all matched objects for this browser rule after compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.6Integer32read-onlycurrent
compBrowRuleCompRatio
OBJECT-TYPE
Compression ratio per browser rule.
1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.7Integer32read-onlycurrent
compPerUrlRuleListStatsTable
OBJECT-TYPE
A table for compression statistics per URL Rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10not-accessiblecurrent
compPerUrlRuleListStatsEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1not-accessiblecurrent
compUrlRuleListIndex
OBJECT-TYPE
Compression url rule list index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.1Integer32read-onlycurrent
compUrlRuleListId
OBJECT-TYPE
Compression url rule list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.2DisplayStringread-onlycurrent
compUrlRuleListNumOfObj
OBJECT-TYPE
Number of objects matched by this url rule list during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.3Integer32read-onlycurrent
compUrlRuleListSizeBefComp
OBJECT-TYPE
Total size of all matched objects for this url rule list before compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.4Integer32read-onlycurrent
compUrlRuleListSizeAftComp
OBJECT-TYPE
Total size of all matched objects this url rule list after compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.5Integer32read-onlycurrent
compUrlRuleListCompRatio
OBJECT-TYPE
Compression ratio for this url rule list.
1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.6Integer32read-onlycurrent
compPerUrlRuleStatsTable
OBJECT-TYPE
A table for compression statistics per URL Rule.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11not-accessiblecurrent
compPerUrlRuleStatsEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1not-accessiblecurrent
compUrlRuleRuleListIndex
OBJECT-TYPE
Compression url rule rule-list index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.1Integer32read-onlycurrent
compUrlRuleIndex
OBJECT-TYPE
Compression url rule index.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.2Integer32read-onlycurrent
compUrlRuleRuleListId
OBJECT-TYPE
Compression url rule rule-list identifier.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.3DisplayStringread-onlycurrent
compUrlRuleNumOfObj
OBJECT-TYPE
Number of objects matched by this url rule during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.4Integer32read-onlycurrent
compUrlRuleSizeBefComp
OBJECT-TYPE
Total size of all matched objects for this url rule before compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.5Integer32read-onlycurrent
compUrlRuleSizeAftComp
OBJECT-TYPE
Total size of all matched objects for this url rule after compression.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.6Integer32read-onlycurrent
compUrlRuleCompRatio
OBJECT-TYPE
Compression ratio for this url rule.
1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.7Integer32read-onlycurrent
httpStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.24
httpStatSummCliusingKeepAliv
OBJECT-TYPE
Number of clients sending connection: keep-alive.
1.3.6.1.4.1.1872.2.5.4.2.24.1Integer32read-onlycurrent
httpStatSummHTTP10Per
OBJECT-TYPE
Percent of requests done using HTTP 1.0 during the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.24.2Integer32read-onlycurrent
httpStatSummHTTP11Per
OBJECT-TYPE
Percent of requests done using HTTP 1.1 during measuring period.
1.3.6.1.4.1.1872.2.5.4.2.24.3Integer32read-onlycurrent
httpStatSummHttpToHttpsRedir
OBJECT-TYPE
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS.
1.3.6.1.4.1.1872.2.5.4.2.24.4Integer32read-onlycurrent
httpStatSummAvgNumReqPerConn
OBJECT-TYPE
The average number of requests done over each client connection.
1.3.6.1.4.1.1872.2.5.4.2.24.5Integer32read-onlycurrent
httpStatSummResSmall1Kb
OBJECT-TYPE
Number of responses for which content size reported smaller than 1KB.
1.3.6.1.4.1.1872.2.5.4.2.24.6Integer32read-onlycurrent
httpStatSummRes1KbTo10Kb
OBJECT-TYPE
Number of responses for which content size reported between 1KB and 10KB.
1.3.6.1.4.1.1872.2.5.4.2.24.7Integer32read-onlycurrent
httpStatSummRes11KbTo50Kb
OBJECT-TYPE
Number of responses for which content size reported between 11KB and 50KB.
1.3.6.1.4.1.1872.2.5.4.2.24.8Integer32read-onlycurrent
httpStatSummRes51KbTo100Kb
OBJECT-TYPE
Number of responses for which content size reported between 51KB and 100KB.
1.3.6.1.4.1.1872.2.5.4.2.24.9Integer32read-onlycurrent
httpStatSummResLarger100Kb
OBJECT-TYPE
Number of responses for which content size reported larger than 100KB.
1.3.6.1.4.1.1872.2.5.4.2.24.10Integer32read-onlycurrent
httpTransSummReqCliToAas
OBJECT-TYPE
Number of clients requests from AAS done in the measuring period .
1.3.6.1.4.1.1872.2.5.4.2.24.11Integer32read-onlycurrent
httpTransSummReqAasToSer
OBJECT-TYPE
Number of AAS requests from servers done in the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.24.12Integer32read-onlycurrent
httpTransSummResSerToAas
OBJECT-TYPE
Number of servers responses to AAS in the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.24.13Integer32read-onlycurrent
httpTransSummResAasToCli
OBJECT-TYPE
Number of AAS responses to clients in the measuring period.
1.3.6.1.4.1.1872.2.5.4.2.24.14Integer32read-onlycurrent
httpTransSummTransRate
OBJECT-TYPE
HTTP transactions per second.
1.3.6.1.4.1.1872.2.5.4.2.24.15Integer32read-onlycurrent
httpPerServStatsTable
OBJECT-TYPE
A table for HTTP statistics per virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16not-accessiblecurrent
httpPerServStatsEntry
OBJECT-TYPE
The row definition for HTTP statistics per virtual service table.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1not-accessiblecurrent
httpPerServStatsVirtServIndex
OBJECT-TYPE
Virtual server number.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.1Integer32read-writecurrent
httpPerServStatsVirtServiceIndex
OBJECT-TYPE
Virtual server service index.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.2Integer32read-writecurrent
httpPerServStatsVirtServPort
OBJECT-TYPE
Virtual server service port number.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.3Integer32read-writecurrent
httpPerServStatsCliUseKeepAlive
OBJECT-TYPE
Number of clients sending Connection: Keep-Alive for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.4Integer32read-onlycurrent
httpPerServStatsHttp10VsHttp11Ratio
OBJECT-TYPE
Ratio of requests done using HTTP 1.0 and HTTP 1.1 during measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.5Integer32read-onlycurrent
httpPerServStatsHttpToHTTPSRedir
OBJECT-TYPE
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.6Integer32read-onlycurrent
httpPerServStatsAvgNumReqPerConn
OBJECT-TYPE
The average number of requests done over each client connection for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.7Integer32read-onlycurrent
httpPerServStatsRespSmall1Kb
OBJECT-TYPE
Number of responses for which content size reported smaller than 1KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.8Integer32read-onlycurrent
httpPerServStatsResp1KbTo10Kb
OBJECT-TYPE
Number of responses for which content size reported between 1KB and 10KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.9Integer32read-onlycurrent
httpPerServStatsResp11KbTo50Kb
OBJECT-TYPE
Number of responses for which content size reported between 11KB and 50KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.10Integer32read-onlycurrent
httpPerServStatsResp51KbTo100Kb
OBJECT-TYPE
Number of responses for which content size reported between 51KB and 100KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.11Integer32read-onlycurrent
httpPerServStatsRespLarger100Kb
OBJECT-TYPE
Number of responses for which content size reported larger than 100KB for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.12Integer32read-onlycurrent
httpPerServStatsReqCliToAas
OBJECT-TYPE
Number of clients requests from AAS done in the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.13Integer32read-onlycurrent
httpPerServStatsReqAasToSer
OBJECT-TYPE
Number of AAS requests from servers done in the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.14Integer32read-onlycurrent
httpPerServStatsRespSerToAas
OBJECT-TYPE
Number of servers responses to AAS in the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.15Integer32read-onlycurrent
httpPerServStatsRespAasToCli
OBJECT-TYPE
Number of AAS responses to clients in the measuring period for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.16Integer32read-onlycurrent
httpPerServStatsTransRate
OBJECT-TYPE
Transactions rate for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.16.1.17Integer32read-onlycurrent
connmngStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.24.17
connmngStatSummServConn
OBJECT-TYPE
Number of concurrent backend server connections.
1.3.6.1.4.1.1872.2.5.4.2.24.17.1Integer32read-onlycurrent
connmngStatSummCliReq
OBJECT-TYPE
Number of client requests passed to AX.
1.3.6.1.4.1.1872.2.5.4.2.24.17.2Integer32read-onlycurrent
connmngStatSummMulRatio
OBJECT-TYPE
Connection multiplexing ratio.
1.3.6.1.4.1.1872.2.5.4.2.24.17.3Integer32read-onlycurrent
connmngPerServStatsTable
OBJECT-TYPE
A table for connection management statistics per virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4not-accessiblecurrent
connmngPerServStatsEntry
OBJECT-TYPE
The row definition for connection management statistics per virtual service table.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1not-accessiblecurrent
connmngPerServStatsVirtServIndex
OBJECT-TYPE
Virtual server number.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.1Integer32read-writecurrent
connmngPerServStatsVirtServiceIndex
OBJECT-TYPE
Virtual server service index.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.2Integer32read-writecurrent
connmngPerServStatsVirtServPort
OBJECT-TYPE
Virtual server service port number.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.3Integer32read-writecurrent
connmngPerServStatsServConn
OBJECT-TYPE
Number of concurrent backend server connections for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.4Integer32read-onlycurrent
connmngPerServStatsCliReq
OBJECT-TYPE
Number of client requests passed to AX for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.5Integer32read-onlycurrent
connmngPerServStatsMulRatio
OBJECT-TYPE
Connection multiplexing ratio for virtual service.
1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.6Integer32read-onlycurrent
sapStats
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.2.25
slbStatSapAslrTable
OBJECT-TYPE
The sap aslrr statistics table. This table shows the statistics of sap aslr for a particular vip.
1.3.6.1.4.1.1872.2.5.4.2.25.1not-accessiblecurrent
slbStatSapAslrEntry
OBJECT-TYPE
A row in the sap aslr statistics table.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1not-accessiblecurrent
slbStatSapAslrIndex
OBJECT-TYPE
The Sap Aslr table index.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.1Integer32read-onlycurrent
slbStatSapAslrSampling
OBJECT-TYPE
The number of Sap Aslr server lookups.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.2Counter32read-onlycurrent
slbStatSapAslrFailure
OBJECT-TYPE
The number of Sap Aslr server lookup failures.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.3Counter32read-onlycurrent
slbStatSapAslrDeviceUpdates
OBJECT-TYPE
The number of Alteon automated configuration updates.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.4Counter32read-onlycurrent
slbStatSapAslrDeviceFailure
OBJECT-TYPE
The number of Alteon automated configuration failure.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.5Counter32read-onlycurrent
slbStatSapAslrLastAct
OBJECT-TYPE
The Sap Aslr last activity time stamp.
1.3.6.1.4.1.1872.2.5.4.2.25.1.1.6DisplayString (SIZE(0..31))read-onlycurrent
layer4Info
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3
slbRealServerInfoTable
OBJECT-TYPE
The table of real server run-time information.
1.3.6.1.4.1.1872.2.5.4.3.1not-accessiblecurrent
slbRealServerInfoEntry
OBJECT-TYPE
A row in the real server information table.
1.3.6.1.4.1.1872.2.5.4.3.1.1not-accessiblecurrent
slbRealServerInfoIndex
OBJECT-TYPE
The real server index
1.3.6.1.4.1.1872.2.5.4.3.1.1.1Integer32read-onlycurrent
slbRealServerInfoIpAddr
OBJECT-TYPE
IP address of the real server.
1.3.6.1.4.1.1872.2.5.4.3.1.1.2IpAddressread-onlycurrent
slbRealServerMacAddr
OBJECT-TYPE
The MAC address of the real server.
1.3.6.1.4.1.1872.2.5.4.3.1.1.3PhysAddressread-onlycurrent
slbRealServerInfoSwitchPort
OBJECT-TYPE
The switch port that the real server is connected to.
1.3.6.1.4.1.1872.2.5.4.3.1.1.4Integer32read-onlycurrent
slbRealServerInfoHealthLayer
OBJECT-TYPE
The OSI layer at which the real server functionality is verified.
1.3.6.1.4.1.1872.2.5.4.3.1.1.5INTEGER {layer1(1), layer3(3), layer4(4)}read-onlycurrent
slbRealServerInfoOverflow
OBJECT-TYPE
The overflow state of the real server.
1.3.6.1.4.1.1872.2.5.4.3.1.1.6INTEGER {overflow(1), no-overflow(2)}read-onlycurrent
slbRealServerInfoState
OBJECT-TYPE
The state of the real server.
1.3.6.1.4.1.1872.2.5.4.3.1.1.7INTEGER {running(2), failed(3), disabled(4)}read-onlycurrent
slbRealServerInfoVlan
OBJECT-TYPE
The VLAN that the real server belongs to.
1.3.6.1.4.1.1872.2.5.4.3.1.1.8Integer32read-onlycurrent
slbRealServerRportInfoTable
OBJECT-TYPE
The table of real server rport run-time information.
1.3.6.1.4.1.1872.2.5.4.3.3not-accessiblecurrent
slbRealServerRportInfoEntry
OBJECT-TYPE
A row in the real server rport information table.
1.3.6.1.4.1.1872.2.5.4.3.3.1not-accessiblecurrent
slbRealServerRportRealIndex
OBJECT-TYPE
The real server index
1.3.6.1.4.1.1872.2.5.4.3.3.1.1Integer32read-onlycurrent
slbRealServerRportServIndex
OBJECT-TYPE
The real server service index
1.3.6.1.4.1.1872.2.5.4.3.3.1.2Integer32read-onlycurrent
slbRealServerRportInfoRport
OBJECT-TYPE
The real server real port number
1.3.6.1.4.1.1872.2.5.4.3.3.1.3Integer32read-onlycurrent
slbRealServerRportInfoState
OBJECT-TYPE
The state of the real server port.
1.3.6.1.4.1.1872.2.5.4.3.3.1.4INTEGER {up(1), down(2), slowstart(3)}read-onlycurrent
slbRealServerRportInfoGroup
OBJECT-TYPE
The real server group number.
1.3.6.1.4.1.1872.2.5.4.3.3.1.5INTEGERread-onlycurrent
slbVirtServicesInfoTable
OBJECT-TYPE
The table of virtual server services run-time information.
1.3.6.1.4.1.1872.2.5.4.3.4not-accessiblecurrent
slbVirtServicesInfoEntry
OBJECT-TYPE
A row in the virtual service information table.
1.3.6.1.4.1.1872.2.5.4.3.4.1not-accessiblecurrent
slbVirtServicesInfoVirtServIndex
OBJECT-TYPE
The virtual server index.
1.3.6.1.4.1.1872.2.5.4.3.4.1.1Integer32read-onlycurrent
slbVirtServicesInfoSvcIndex
OBJECT-TYPE
The virtual service index.
1.3.6.1.4.1.1872.2.5.4.3.4.1.2Integer32read-onlycurrent
slbVirtServicesInfoRealServIndex
OBJECT-TYPE
The real server index.
1.3.6.1.4.1.1872.2.5.4.3.4.1.3Integer32read-onlycurrent
slbVirtServicesInfoVport
OBJECT-TYPE
The layer 4 virtual port number for the service.
1.3.6.1.4.1.1872.2.5.4.3.4.1.4Integer32read-onlycurrent
slbVirtServicesInfoRport
OBJECT-TYPE
The layer 4 real port number for the service.
1.3.6.1.4.1.1872.2.5.4.3.4.1.5Integer32read-onlycurrent
slbVirtServicesInfoState
OBJECT-TYPE
The state of the real server for this virtual service.
1.3.6.1.4.1.1872.2.5.4.3.4.1.6INTEGER {blocked(1), running(2), failed(3), disabled(4), slowstart(5)}read-onlycurrent
slbVirtServicesInfoResponseTime
OBJECT-TYPE
The health check response time for the real server for this virtual service.
1.3.6.1.4.1.1872.2.5.4.3.4.1.7Integer32read-onlycurrent
slbVirtServicesInfoWeight
OBJECT-TYPE
The real server weight.
1.3.6.1.4.1.1872.2.5.4.3.4.1.8Integer32read-onlycurrent
slbSessionInfo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.5
slbSessionInfoState
OBJECT-TYPE
When this object is read the current state is returned. idle(2) indicates that there is no session binding table request in progress. When a read on this object returns inprogress(3) indicates that a session binding table retrieval request is in progress. Setting the value to start(1), will start a new session table retrieval operation based on the filtering criteria. complete(4) indicates that the session table has been retrieved. Once the slbSessionInfoTable is read the state should be set back to 'idle' which frees the session table buffer and others can issue a request command via SNMP.
1.3.6.1.4.1.1872.2.5.4.3.5.1INTEGER {start(1), idle(2), inprogress(3), complete(4)}read-writecurrent
slbSessionInfoType
OBJECT-TYPE
This identifies the filtering criteria for the session binding table request. all(1) : Show all session entries cip(2) : Show all session entries with source IP address cport(3) : Show all session entries with source port dip(4) : Show all session entries with destination IP address dport(5) : Show all session entries with destination port pip(6) : Show all session entries with proxy IP address pport(7) : Show all session entries with proxy port filter(8): Show all session entries with matching filter flag(9) : Show all session entries with matching flag port(10) : Show all session entries with ingress port real(11) : Show all session entries with real IP address.
1.3.6.1.4.1.1872.2.5.4.3.5.2INTEGER {all(1), cip(2), cport(3), dip(4), dport(5), pip(6), pport(7), filter(8), flag(9), port(10), real(11)}read-writecurrent
slbSessionInfoIpAddr
OBJECT-TYPE
IP address of the requested filtering criteria 0.0.0.0 if the filtering criteria is not to match session entries with the same IP address.
1.3.6.1.4.1.1872.2.5.4.3.5.3IpAddressread-writecurrent
slbSessionInfoFilterId
OBJECT-TYPE
This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. 0 if slbSessionInfoFilterID is not the matching criteria.
1.3.6.1.4.1.1872.2.5.4.3.5.4Integer32read-writecurrent
slbSessionInfoPortId
OBJECT-TYPE
The <port number> if the filtering criteria is (port) to match all session entries with the matching ingress port or this represents the <real port> if the requested filtering criteria is to match session entries with (pport) proxy port, (cport) source port, (dport) destination port, This entry is 0 if the filtering criteria is not to match session entries with the same port.
1.3.6.1.4.1.1872.2.5.4.3.5.5Integer32read-writecurrent
slbSessionInfoFlag
OBJECT-TYPE
If the filtering criteria is flag select one of e|l|n|p|s|t|u|w(Flag) none(20) is selected if flag is not the fitering criteria. eFlag: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. lFlag: Indicates the session is a link load balance session. nFlag: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. pFlag: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. sFlag: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. tFlag: Indicates the session is TCP rate limiting per-client entry. uFlag: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. wFlag: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. ruFlag: Indicates the session is a UDP rate limiting per-client entry. riFlag: Indicates the session is a ICMP rate limiting per-client entry. viFlag: Indicates the session is a SIP INVITE session. vrFlag: Indicates the session is a SIP REGISTER session. vsFlag: Indicates the session is a SIP SUBSCRIBE session. vmFlag: Indicates the session is a SIP MESSAGE session. vdFlag: Indicates the session is a SIP NAT data session.
1.3.6.1.4.1.1872.2.5.4.3.5.6INTEGER {eFlag(1), lFlag(2), nFlag(3), pFlag(4), sFlag(5), tFlag(6), uFlag(7), wFlag(8), ruFlag(9), riFlag(10), viFlag(11), vrFlag(12), vsFlag(13), vmFlag(14), vdFlag(15), none(20)}read-writecurrent
slbSessionInfoStringFormatFlag
OBJECT-TYPE
The flag which determines if the session table entries have to be formatted or (none) indicates no formatting to be done.
1.3.6.1.4.1.1872.2.5.4.3.5.7INTEGER {formatted(1), none(2)}read-writecurrent
slbSessionInfoTable
OBJECT-TYPE
The table of SLB session entries.
1.3.6.1.4.1.1872.2.5.4.3.5.8not-accessiblecurrent
slbSessionInfoEntry
OBJECT-TYPE
Information about SLB sessions.
1.3.6.1.4.1.1872.2.5.4.3.5.8.1not-accessiblecurrent
slbSessionInfoSpIndex
OBJECT-TYPE
The SP which created the session.
1.3.6.1.4.1.1872.2.5.4.3.5.8.1.1Integer32read-onlycurrent
slbSessionInfoIndex
OBJECT-TYPE
The index to the slbSessionInfoTable.
1.3.6.1.4.1.1872.2.5.4.3.5.8.1.2Integer32read-onlycurrent
slbSessionInfoString
OBJECT-TYPE
The string representing the SLB session entries in the formatted case: The fields, (1)-(13), associated with a session, as identified in the example below are described in the following. 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> (1) (2) (3) (4) (5) (6) 1.1.1.2 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (7a) (7) (8) (9) (10) (11) (12) (13) ------------------------------------------------------------------ (1) SP number: This field indicates which SP created the session. (2) Ingress port: This field shows the physical port# of the client traffic that entered to the switch. (3) Source IP address: This field contains the source IP address from client IP packet. (4) Source port: This field identifies the TCP/UDP source port from client packet. (5) Destination IP address: This is the destination IP address from client TCP/UDP packet. For load balancing, this address is the virtual IP address. For filtering redirect, this address is the destination server's address. (6) Destination port: This field identifies the TCP/UDP destination port from client packet. (7a)Proxy IP address: This field contains the proxy IP address substituted by the switch. (7) Proxy port: This field identifies the TCP/UDP source port substituted by the switch. The switch does this substitution when Direct Access Mode is enabled or Proxy is enabled. (8) Real server IP address: For load balancing, this field contains the IP address of the real server that the switch selects to forward client packet to. If the switch does not find live server, this field is the same as destination IP address(5). e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 2.2.2.1 http age 10 For filtering, this field also shows the real server IP address. No address is shown if the filter action is Allow, Deny or NAT. It will show ALLOW, DENY or NAT instead. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 f:11 3,01: 1.1.1.1 1040, 2.2.2.1 http ALLOW age 10 f:22 (9) Server port: For load balancing, this field is the same as destination port(6) except for the RTSP UDP session. For RTSP UDP session, this server port is obtained from client-server negotiation. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 6970, 2.2.2.1 rtsp -> 3.3.3.1 21220 age 10 P For filtering, this field is the filtering application port. It is for internal use only. This field can be urlwcr, wcr, idslb, linkslb or nonat. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 urlwcr age 4 f:123 2,07: 1.1.1.1 1706, 2.2.2.1 http -> 192.168.4.10 linklb age 8 f:10 E (10) Age: This is the session timeout value. If no packet is received within the value specified, the session is freed. e.g. age 10 - The session is aged out in 10 minutes. age < 160 - The session is aged out in 160 minutes. This < indicates that slowage is used(user configures /cfg/slb/adv/slowage) (11) Filter number: This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. (12) Flag: E: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. L: Indicates the session is a link load balance session. N: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. P: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. S: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. Rt: Indicates the session is TCP rate limiting per-client entry. Ru: Indicates the session is UDP rate limiting per-client entry. Ri: Indicates the session is ICMP rate limiting per-client entry. U: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. W: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. (13) Persistent session user count: This counter indicates the number of client sessions created associated with this persistent session.
1.3.6.1.4.1.1872.2.5.4.3.5.8.1.3OCTET STRINGread-onlycurrent
slbSessionInfoMaxSessDump
OBJECT-TYPE
The maximum number of sessions that can exist at any given time.
1.3.6.1.4.1.1872.2.5.4.3.5.9Integer32read-onlycurrent
gslbInfo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.6
gslbInfoRemRealServerTable
OBJECT-TYPE
The Global SLB virtual server information table.
1.3.6.1.4.1.1872.2.5.4.3.6.1not-accessiblecurrent
gslbInfoRemRealServerEntry
OBJECT-TYPE
A row in the Global SLB remote real server information table.
1.3.6.1.4.1.1872.2.5.4.3.6.1.1not-accessiblecurrent
gslbInfoRemRealServerIdx
OBJECT-TYPE
The remote real server number that identifies the remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.1.1.1Integer32read-onlycurrent
gslbInfoRemRealServerIpAddr
OBJECT-TYPE
IP address of the remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.1.1.2IpAddressread-onlycurrent
gslbInfoRemRealServerName
OBJECT-TYPE
The name of the remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.1.1.3DisplayString (SIZE(0..31))read-onlycurrent
gslbInfoRemRealServerState
OBJECT-TYPE
The state of the remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.1.1.4INTEGER {running(2), failed(3), disabled(4)}read-onlycurrent
gslbInfoVirtServerTable
OBJECT-TYPE
The Global SLB virtual server information table.
1.3.6.1.4.1.1872.2.5.4.3.6.2not-accessiblecurrent
gslbInfoVirtServerEntry
OBJECT-TYPE
A row in the Global SLB virtual server information table.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1not-accessiblecurrent
gslbInfoVirtServerIdx
OBJECT-TYPE
The virtual server number that identifies the virtual server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.1Integer32read-onlycurrent
gslbInfoVirtServerServiceIdx
OBJECT-TYPE
The virtual server service number that identifies the virtual service.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.2Integer32read-onlycurrent
gslbInfoVirtServerRserverIdx
OBJECT-TYPE
The real server number that identifies a remote real server. An index of 0 indicates virtual server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.3Integer32read-onlycurrent
gslbInfoVirtServerDname
OBJECT-TYPE
The domain name of the virtual server and remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.4DisplayString (SIZE(0..64))read-onlycurrent
gslbInfoVirtServerVirtPort
OBJECT-TYPE
The service port of the virtual server and remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.5Integer32read-onlycurrent
gslbInfoVirtServerIpAddress
OBJECT-TYPE
The IP address of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.6IpAddressread-onlycurrent
gslbInfoVirtServerResponse
OBJECT-TYPE
The health check response time of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.7Integer32read-onlycurrent
gslbInfoVirtServerSessAvail
OBJECT-TYPE
The available sessions of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.8Integer32read-onlycurrent
gslbInfoVirtServerSessCur
OBJECT-TYPE
The current sessions of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.9Integer32read-onlycurrent
gslbInfoVirtServerSessMax
OBJECT-TYPE
The maximum sessions supported by the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.10Integer32read-onlycurrent
gslbInfoVirtServerSessUtil
OBJECT-TYPE
The sessions utilization (current/max) of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.11INTEGER (1..100)read-onlycurrent
gslbInfoVirtServerCpuUtil
OBJECT-TYPE
The CPU utilization of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.12INTEGER (1..100)read-onlycurrent
gslbInfoVirtServerRemSite
OBJECT-TYPE
The remote site of the remote real server. For virtual server, the remote site is 0.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.13Integer32read-onlycurrent
gslbInfoVirtServerWeight
OBJECT-TYPE
The weight of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.14INTEGER (1..48)read-onlycurrent
gslbInfoVirtServerAvail
OBJECT-TYPE
The availability of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.15INTEGER (1..48)read-onlycurrent
gslbInfoVirtServerRegion
OBJECT-TYPE
The region of the virtual server or remote real server.
1.3.6.1.4.1.1872.2.5.4.3.6.2.1.16INTEGER {unknown(0), northamerica(1), southamerica(2), europe(3), caribbean(4), pacificrim(5), subsahara(6), japan(7), caribbeansubsahara(8), africa(9)}read-onlycurrent
gslbInfoRemSiteTable
OBJECT-TYPE
The Global SLB remote site information table.
1.3.6.1.4.1.1872.2.5.4.3.6.3not-accessiblecurrent
gslbInfoRemSiteEntry
OBJECT-TYPE
A row in the Global SLB remote site information table.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1not-accessiblecurrent
gslbInfoRemSiteIdx
OBJECT-TYPE
The remote site number that identifies the remote site.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1.1Integer32read-onlycurrent
gslbInfoRemSitePrimaryIp
OBJECT-TYPE
The primary IP address of the remote site.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1.2IpAddressread-onlycurrent
gslbInfoRemSiteSecondaryIp
OBJECT-TYPE
The secondary IP address of the remote site.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1.3IpAddressread-onlycurrent
gslbInfoRemSiteName
OBJECT-TYPE
The name of the remote site.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1.4DisplayString (SIZE(0..31))read-onlycurrent
gslbInfoRemSiteState
OBJECT-TYPE
The state of the remote site.
1.3.6.1.4.1.1872.2.5.4.3.6.3.1.5INTEGER {running(2), failed(3), disabled(4)}read-onlycurrent
gslbInfoDnsSec
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.6.4
gslbInfoDnsSecKey
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.6.4.2
gslbInfoDnsSecKeyTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1not-accessiblecurrent
gslbInfoDnsSecKeyEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1not-accessiblecurrent
gslbInfoDnsSecKeyID
OBJECT-TYPE
DNS Sec Table Key.
1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
gslbInfoDnsSecKeyStatus
OBJECT-TYPE
Key status.
1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.4INTEGER {initRollProess(1), newKeyCreated(2), newZskKeyDeployed(3), oldKeyRemoval(4), retrDsFromParent(5), newKskKeyDeployed(6), waitDsChangeOnParent(7), rolloverNotRunning(8), invalid(9), expired(10)}read-onlycurrent
wlmInfo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.7
slbWlmInfoTable
OBJECT-TYPE
The table of workload manager run-time information.
1.3.6.1.4.1.1872.2.5.4.3.7.1not-accessiblecurrent
slbWlmInfoEntry
OBJECT-TYPE
A row in the workload manager information table.
1.3.6.1.4.1.1872.2.5.4.3.7.1.1not-accessiblecurrent
slbWlmInfoIndex
OBJECT-TYPE
The workload manager index.
1.3.6.1.4.1.1872.2.5.4.3.7.1.1.1Integer32read-onlycurrent
slbWlmInfoIpAddr
OBJECT-TYPE
IP address of the workload manager.
1.3.6.1.4.1.1872.2.5.4.3.7.1.1.2IpAddressread-onlycurrent
slbWlmInfoPort
OBJECT-TYPE
The port number of the workload manager.
1.3.6.1.4.1.1872.2.5.4.3.7.1.1.3INTEGER (0..65534)read-onlycurrent
slbWlmInfoState
OBJECT-TYPE
The state of the workload manager.
1.3.6.1.4.1.1872.2.5.4.3.7.1.1.4INTEGER {connected(1), notconnected(2)}read-onlycurrent
slbPortInfo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.8
slbPortInfoTable
OBJECT-TYPE
The table of port information.
1.3.6.1.4.1.1872.2.5.4.3.8.1not-accessiblecurrent
slbPortInfoEntry
OBJECT-TYPE
A row in the port information table.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1not-accessiblecurrent
slbPortInfoIndex
OBJECT-TYPE
Index of slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.1Integer32read-onlycurrent
slbPortClientState
OBJECT-TYPE
Client state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortSerState
OBJECT-TYPE
Server state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortFltState
OBJECT-TYPE
Filter state on the slb port .
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortRTSState
OBJECT-TYPE
RTS processing state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortHotStandbyState
OBJECT-TYPE
Hot standby state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortInterSWState
OBJECT-TYPE
Inter-switch processing state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortProxyState
OBJECT-TYPE
Proxy state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.8INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortIdSlbState
OBJECT-TYPE
Intrusion detection server load balancing state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortSymantecState
OBJECT-TYPE
Symantec Processing state on the slb port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
slbPortFitersAdded
OBJECT-TYPE
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port.
1.3.6.1.4.1.1872.2.5.4.3.8.1.1.11OCTET STRING (SIZE(0..256))read-onlycurrent
synAttackInfo
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.3.9
synAtkState
OBJECT-TYPE
State of the Syn Attack, represents whether it is running or not.
1.3.6.1.4.1.1872.2.5.4.3.9.1INTEGER {on(1), off(2)}read-onlycurrent
synAtkInterval
OBJECT-TYPE
Specifies interval period of syn attack inspection in seconds, it returns 0 if synAtk is OFF.
1.3.6.1.4.1.1872.2.5.4.3.9.2Integer32read-onlycurrent
synAtkThreshhold
OBJECT-TYPE
Specifies threshold of syn attack alram, it returns 0 if synAtk is OFF .
1.3.6.1.4.1.1872.2.5.4.3.9.3Integer32read-onlycurrent
synAtkWarningFired
OBJECT-TYPE
Specifies number of times syn attack warnings fired.
1.3.6.1.4.1.1872.2.5.4.3.9.4Integer32read-onlycurrent
synAtkResponseInterval
OBJECT-TYPE
Specifies interval period of syn cookie generation in milliseconds, it returns 0 if synAtk is OFF.
1.3.6.1.4.1.1872.2.5.4.3.9.5Integer32read-onlycurrent
synAtkOnOff
OBJECT-TYPE
Globaly set SYN Protection ON/FF.
1.3.6.1.4.1.1872.2.5.4.3.9.6INTEGER {on(1), off(2)}read-onlycurrent
slbFreeVirtualServerIndexInfo
OBJECT-TYPE
Retrieve the next virtual server index
1.3.6.1.4.1.1872.2.5.4.3.10INTEGERread-onlycurrent
slbFreeRealGroupIndexInfo
OBJECT-TYPE
Retrieve the next server group index
1.3.6.1.4.1.1872.2.5.4.3.11INTEGERread-onlycurrent
slbFreeRealServerIndexInfo
OBJECT-TYPE
Retrieve the next real server index
1.3.6.1.4.1.1872.2.5.4.3.12INTEGERread-onlycurrent
layer4Oper
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4
slbOperRealServerTable
OBJECT-TYPE
The table of real servers.
1.3.6.1.4.1.1872.2.5.4.4.1not-accessiblecurrent
slbOperRealServerEntry
OBJECT-TYPE
A row in the slbOperRealServerTable
1.3.6.1.4.1.1872.2.5.4.4.1.1not-accessiblecurrent
slbOperRealServerIndex
OBJECT-TYPE
The index for the real server.
1.3.6.1.4.1.1872.2.5.4.4.1.1.1Integer32read-onlycurrent
slbOperRealServerStatus
OBJECT-TYPE
This an action object which is used to temporarily enable/disable a real server. The real server will be returned to its configured operational mode when the switch is reset. Setting the value to 'cookiepersistant' allows cookie persistent HTTP 1.0 sessions when the real server is offline.'fastage' option is for removing the existing sessions. And 'cookiepersistentfastage' allows cookie persistent sessions and remove the existing sessions when real server is offline.
1.3.6.1.4.1.1872.2.5.4.4.1.1.2INTEGER {enable(1), disable(2), cookiepersistent(3), fastage(4), cookiepersistentfastage(5)}read-writecurrent
slbOperClearSessionTable
OBJECT-TYPE
This is an action object to clear session binding table. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.5.4.4.2INTEGER {ok(1), clear(2)}read-writecurrent
slbOperConfigSync
OBJECT-TYPE
When set to a value of 'sync(2)' it synchronizes the SLB, filter and VRRP configuration on a peer switch. To take effect, peers must be configured on the switches and the administrator password on the switches must be identical. 'ok(1)' is returned when the object os read.
1.3.6.1.4.1.1872.2.5.4.4.3INTEGER {ok(1), sync(2)}read-writecurrent
gslbOper
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.4
gslbOperQuery
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.4.1
gslbOperQueryDomain
OBJECT-TYPE
Domain to query Global SLB selection.
1.3.6.1.4.1.1872.2.5.4.4.4.1.1DisplayStringread-writecurrent
gslbOperQuerySrcIp
OBJECT-TYPE
Source Ip Address to query Global SLB selection.
1.3.6.1.4.1.1872.2.5.4.4.4.1.2IpAddressread-writecurrent
gslbOperSendQuery
OBJECT-TYPE
Query Global SLB selection.When set to a value of Query(2) it sends Global SLB selection query.Ok(1) is returned when this object is read.
1.3.6.1.4.1.1872.2.5.4.4.4.1.3INTEGER {ok(1), query(2)}read-writecurrent
gslbOperQuerySrcIpV6
OBJECT-TYPE
Source Ip V6 Address to query Global SLB selection. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.4.4.1.4DisplayString (SIZE(0..40))read-writecurrent
gslbOperQuerySrcIpVer
OBJECT-TYPE
Source Ip Version to query Global SLB selection.
1.3.6.1.4.1.1872.2.5.4.4.4.1.5INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
gslbOperQueryType
OBJECT-TYPE
Global SLB selection Query Type.
1.3.6.1.4.1.1872.2.5.4.4.4.1.6INTEGER {a(1), aaaa(2)}read-writecurrent
gslbOperAdd
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.4.2
gslbOperAddDomain
OBJECT-TYPE
Domain to be added into Global SLB DNS Presistence cache.
1.3.6.1.4.1.1872.2.5.4.4.4.2.1DisplayStringread-writecurrent
gslbOperAddSrcIp
OBJECT-TYPE
Source Ip Address to be added into Global SLB DNS Persistence cache.
1.3.6.1.4.1.1872.2.5.4.4.4.2.2IpAddressread-writecurrent
gslbOperAddServerIp
OBJECT-TYPE
Server Ip Address to be added into Global SLB DNS Persistence cache.
1.3.6.1.4.1.1872.2.5.4.4.4.2.3IpAddressread-writecurrent
gslbOperAddEntry
OBJECT-TYPE
Add entry to Global SLB DNS persistence cache. When set to a value of add(2) Entry will be added into Global SLB DNS persistence cache. Ok(1) is returned when object is read.
1.3.6.1.4.1.1872.2.5.4.4.4.2.4INTEGER {ok(1), add(2)}read-writecurrent
gslbOperAddSrcIp6
OBJECT-TYPE
Source Ip Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.4.4.2.5DisplayString (SIZE(0..40))read-writecurrent
gslbOperAddServerIp6
OBJECT-TYPE
Server IPV6 Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
1.3.6.1.4.1.1872.2.5.4.4.4.2.6DisplayString (SIZE(0..40))read-writecurrent
gslbOperRemove
OBJECT-TYPE
This is an action object to Remove all entries from Global SLB DNS persistence cache. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.5.4.4.4.3INTEGER {ok(1), remove(2)}read-writecurrent
gslbOperAvPersis
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.4.4
gslbOperAvPersisVirtNum
OBJECT-TYPE
Enter Virtual Server Number for which GSLB availability persistence should be enabled/disabled.
1.3.6.1.4.1.1872.2.5.4.4.4.4.1INTEGER (1..1024)read-writecurrent
gslbOperAvPersisState
OBJECT-TYPE
Enable or Disable GSLB availability persistence.
1.3.6.1.4.1.1872.2.5.4.4.4.4.2INTEGER {enabled(1), disabled(2)}read-writecurrent
gslbOperAvpersistence
OBJECT-TYPE
When we set to a value of 2(config),it enable/disable GSLB availability persistence for configures virtual server. Ok(1) is returned when this object is read.
1.3.6.1.4.1.1872.2.5.4.4.4.4.3INTEGER {ok(1), config(2)}read-writecurrent
gslbOperClear
OBJECT-TYPE
This is an action object when we set to a value of(2) it clear the client cache of dynamic entries. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.5.4.4.4.5INTEGER {ok(1), clear(2)}read-writecurrent
gslbOperDnsSec
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.4.6
gslbOperDnsSecTable
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.4.4.6.1not-accessiblecurrent
gslbOperDnsSecEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1not-accessiblecurrent
gslbOperDnsSecKeyID
OBJECT-TYPE
DNS Sec Table Key.
1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.1DisplayString (SIZE(0..32))read-onlycurrent
gslbOperDnsSecEmergencyRollover
OBJECT-TYPE
By setting the value to rollover(2), DNSSEC emergency rollover procedure of a key will be Performed.
1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.2INTEGER {other(1), rollover(2)}read-writecurrent
gslbOperDnsSecImmediateRollover
OBJECT-TYPE
By setting the value to rollover(2), DNSSEC immediate rollover procedure of a key will be Performed.
1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.3INTEGER {other(1), rollover(2)}read-writecurrent
slbOperGroupRealServerTable
OBJECT-TYPE
The table of real server per group.
1.3.6.1.4.1.1872.2.5.4.4.5not-accessiblecurrent
slbOperGroupRealServerEntry
OBJECT-TYPE
A row in the Real server group table.
1.3.6.1.4.1.1872.2.5.4.4.5.1not-accessiblecurrent
slbOperRealServGroupIndex
OBJECT-TYPE
The real server group index.
1.3.6.1.4.1.1872.2.5.4.4.5.1.1Integer32read-onlycurrent
slbOperGroupRealServIndex
OBJECT-TYPE
The real server index.
1.3.6.1.4.1.1872.2.5.4.4.5.1.2Integer32read-onlycurrent
slbOperGroupRealServerState
OBJECT-TYPE
This an action object which is used to temporarily enable/disable a real server in group. The real server will be returned to its configured operational mode when the switch is reset.
1.3.6.1.4.1.1872.2.5.4.4.5.1.3INTEGER {enable(1), disable(2)}read-writecurrent
slbOperSessionDel
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.6
slbOperSessionDelSrcIp
OBJECT-TYPE
Session Source IP Address to be deleted
1.3.6.1.4.1.1872.2.5.4.4.6.1IpAddressread-writecurrent
slbOperSessionDelSrcPort
OBJECT-TYPE
Session Source Port to be deleted
1.3.6.1.4.1.1872.2.5.4.4.6.2INTEGER (0..65534)read-writecurrent
slbOperSessionDelDestIp
OBJECT-TYPE
Session Destination IP Address to be deleted
1.3.6.1.4.1.1872.2.5.4.4.6.3IpAddressread-writecurrent
slbOperSessionDelDestPort
OBJECT-TYPE
Session Destination Port to be deleted
1.3.6.1.4.1.1872.2.5.4.4.6.4INTEGER (0..65534)read-writecurrent
slbOperSessionDelTransType
OBJECT-TYPE
Set a flag indicating whether Transport Type is TCP or UDP
1.3.6.1.4.1.1872.2.5.4.4.6.5INTEGER {tcp(1), udp(2)}read-writecurrent
slbOperSessionDelete
OBJECT-TYPE
This is an action object to delete session table entry. when set to a value of delete(2) it deletes session table entry. Ok(1) is returned when object is read.
1.3.6.1.4.1.1872.2.5.4.4.6.6INTEGER {ok(1), delete(2)}read-writecurrent
slbOperHttpCachePurgeTable
OBJECT-TYPE
The table of services per server.
1.3.6.1.4.1.1872.2.5.4.4.7not-accessiblecurrent
slbOperHttpCachePurgeEntry
OBJECT-TYPE
A row in the http cache purge service table.
1.3.6.1.4.1.1872.2.5.4.4.7.1not-accessiblecurrent
slbOperHttpCachePurgeServerIndex
OBJECT-TYPE
The Http Cache purge server index.
1.3.6.1.4.1.1872.2.5.4.4.7.1.1Integer32 (1..1024)read-createcurrent
slbOperHttpCachePurgeServiceIndex
OBJECT-TYPE
The Http Cache purge service index.
1.3.6.1.4.1.1872.2.5.4.4.7.1.2Integer32 (10..65534)read-createcurrent
slbOperHttpCachePurgeURL
OBJECT-TYPE
Set object URL or all.
1.3.6.1.4.1.1872.2.5.4.4.7.1.3DisplayStringread-createcurrent
ocspCachePurge
OBJECT-IDENTITY
1.3.6.1.4.1.1872.2.5.4.4.8
slbOperOcspCachePurge
OBJECT-TYPE
Client authentication policy id or All.
1.3.6.1.4.1.1872.2.5.4.4.8.1DisplayStringread-writecurrent