MIBs Depot

ALLIEDTELESYN-MIB

Namespace
allied
Source file
ALLIEDTELESYN-MIB
Digest
sha256:dbc081bf0613d58a8acb9bc932b8521fb3ebf7fcd5ad4d3bf6b8629ab9ff2724

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALLIEDTELESYN-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
InterfaceIndexOrZero
type

Objects

NameOIDSyntaxAccessStatus
alliedTelesyn
OBJECT-IDENTITY
1.3.6.1.4.1.207
products
OBJECT-IDENTITY
1.3.6.1.4.1.207.1
bridgeRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1
centreCOM_AR300Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.8
centreCOM_AR720Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.11
centreCOM_AR300LRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.12
centreCOM_AR310Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.13
centreCOM_AR300LURouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.14
centreCOM_AR300URouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.15
centreCOM_AR310URouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.16
centreCOM_AR350Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.17
centreCOM_AR370Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.18
centreCOM_AR330Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.19
centreCOM_AR395Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.20
centreCOM_AR390Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.21
centreCOM_AR370URouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.22
centreCOM_AR740Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.23
centreCOM_AR140SRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.24
centreCOM_AR140URouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.25
centreCOM_AR320Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.26
centreCOM_AR130SRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.27
centreCOM_AR130URouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.28
centreCOM_AR160Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.29
at_AR740RouterDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.43
centreCOM_AR120Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.44
at_AR410Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.47
at_AR725Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.48
at_AR745Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.49
at_AR410v2Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.50
at_AR410v3Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.51
at_AR725RouterDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.52
at_AR745RouterDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.53
at_AR450Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.54
at_AR450DualRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.55
at_AR440Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.59
at_AR441Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.60
at_AR442Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.61
at_AR443Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.62
at_AR444Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.63
at_AR420Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.64
at_AR550Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.73
at_AR551Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.74
at_AR552Router
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.1.75
routerSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14
at_Rapier24
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.1
at_Rapier16fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.2
at_Rapier16fVF
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.3
at_Rapier16fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.4
at_Rapier48
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.5
at_Rapier8t8fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.6
at_Rapier8t8fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.7
at_Rapier8t8fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.8
at_Rapier8t8fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.9
at_Rapier8fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.10
at_Rapier8fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.11
at_Rapier8fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.12
at_Rapier8fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.13
at_Rapier16fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.14
at_RapierG6
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.15
at_RapierG6SX
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.16
at_RapierG6LX
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.17
at_RapierG6MT
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.18
at_Rapier16fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.19
at_Rapier24i
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.20
at_Rapier48i
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.21
at_Switchblade4AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.22
at_Switchblade4DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.23
at_Switchblade8AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.24
at_Switchblade8DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.25
at_9816GF
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.26
at_9812TF
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.27
at_9816GB
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.28
at_9812T
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.29
at_8724XL
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.30
at_8748XL
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.31
at_8724XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.32
at_8748XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.33
at_9816GB_DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.34
at_9812T_DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.35
at_8824
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.36
at_8848
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.37
at_8824_DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.38
at_8848_DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.39
at_8624XL_80
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.41
at_8724XL_80
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.42
at_8748XL_80
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.43
at_8948EX
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.44
at_8948MX
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.45
at_8624T2M
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.46
at_Rapier24i_DC_NEBS
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.47
at_8724XL_DC_NEBS
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.48
at_9924T
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.49
at_9924SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.50
at_9924T_4SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.51
at_9924TEMC
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.53
at_8724MLB
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.55
at_8624POE
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.56
at_86482SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.1.14.58
mibObject
OBJECT-IDENTITY
1.3.6.1.4.1.207.8
brouterMib
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4
atRouter
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4
objects
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1
boards
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1
pprIcmAr023
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.39
pprIcmAr021s
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.40
pprIcmAr022
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.41
pprIcmAr025
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.45
pprIcmAr024
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.46
pprAr300
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.49
pprAr300L
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.52
pprAr310
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.53
pprAr120
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.54
pprAr300Lu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.55
pprAr300u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.56
pprAr310u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.57
pprAr350
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.58
pprIcmAr021u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.59
pprAr720
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.63
pprAr010
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.67
pprAr012
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.68
pprAr011
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.69
pprAr370
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.70
pprAr330
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.71
pprAr395
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.72
pprAr390
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.73
pprAr370u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.75
pprIcmAr020
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.76
pprAr740
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.79
pprAr140s
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.80
pprAr140u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.81
pprAr160su
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.82
pprAr320
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.83
pprAr130s
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.85
pprAr130u
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.86
pprRapier24
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.87
pprNsm0404Pic
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.88
pprA35SXSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.89
pprA35LXSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.90
pprA36MTRJ
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.91
pprA37VF45
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.92
pprA38LC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.93
pprA39Tx
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.94
pprAr740DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.95
pprNsm0418BRI
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.96
pprRapier16fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.97
ppr8624xl80
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.98
pprRapier16fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.99
pprRapier16fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.100
pprRapier8t8fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.101
pprRapier8t8fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.102
pprRapier8t8fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.103
pprRapier8t8fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.104
pprRapier8fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.105
pprRapier8fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.106
pprRapier8fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.107
pprRapier8fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.108
pprRapierG6
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.110
pprRapierG6SX
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.111
pprRapierG6LX
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.112
pprRapierG6MT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.113
pprRapier16fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.114
pprRapier24i
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.115
pprAr824
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.116
pprAr816fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.117
pprAr816fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.118
pprAr816fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.119
pprAr816fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.120
pprAr88t8fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.121
pprAr88t8fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.122
pprAr88t8fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.123
pprAr88t8fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.124
pprAr88fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.125
pprAr88fSCi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.126
pprAr88fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.127
pprAr88fMTi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.128
pprAr824i
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.129
pprAt8724XL
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.130
pprAt8748XL
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.131
pprAt8724XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.132
pprAt8748XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.133
pprAt8824
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.134
pprAt8824DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.135
ppr8724XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.141
ppr8748XLDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.142
pprRapier24iDC_NEBS
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.144
pprAt8724XLDC_NEBS
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.146
pprAt8848DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.147
pprRapier48
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.148
pprAt8848
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.149
pprRapier48i
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.150
pprNsm0424BRI
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.151
pprIcmAR026
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.153
ppr9816GF
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.157
ppr9812TF
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.158
pprSbChassis4AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.159
pprSbChassis4DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.160
pprSbChassis8AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.161
pprSbChassis8DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.162
pprSbChassis16AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.163
pprSbChassis16DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.164
pprSbControl
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.165
pprSbControlDTM
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.166
pprSb48t
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.167
pprSb96t
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.168
pprSb32fSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.169
pprSb32fMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.170
pprSb8fRJ
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.172
pprSb8fSXSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.173
pprSb8fSXMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.174
pprSb8fLXSC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.175
pprSb8fLXMT
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.176
pprAr410
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.177
pprA40SC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.178
pprA40MTRJ
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.179
pprA41SC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.180
pprA41MTRJ
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.181
pprAr725
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.182
pprAr745
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.183
pprSb8GBIC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.184
pprA42GBIC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.185
ppr9816GB
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.186
ppr9812T
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.187
pprNsm048DS3
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.188
pprAr450
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.191
pprAr450Dual
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.192
pprSbExpander
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.193
pprAr725DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.194
pprAr745DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.195
pprAr410v2
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.196
pprAr410v3
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.197
pprIcmAr027
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.198
ppr8948EX
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.202
ppr8948MX
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.203
ppr9816GBDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.204
ppr9812TDC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.205
pprIcmAr021v2s
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.206
pprA50
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.207
pprA51
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.208
pprA52
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.209
pprA53
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.210
pprFanA01
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.212
pprAtPwr01AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.213
pprAtPwr01DC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.214
pprAtFan01
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.215
pprSb24RJ
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.216
pprSb1XFP
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.217
ppr9924T
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.218
ppr9924SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.219
ppr9924TEMC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.220
ppr9924T4SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.221
pprAR440
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.227
pprAR441
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.228
pprAR442
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.229
pprAR443
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.230
pprAR444
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.231
pprAR420
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.232
pprAt8624T2M
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.239
pprA46Tx
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.240
pprAR550
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.241
pprAR551
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.242
pprAR552
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.243
pprC8724MLB
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.248
pprAt86482SP
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.252
pprAt8624POE
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.253
pprAtPwr01RAC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.254
pprAtFan01R
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.255
pprAtPwr02AC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.264
pprAtPwr02RAC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.265
pprSb24SFP
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.1.269
release
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.2
iftypes
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3
ifaceEth
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.1
ifaceSyn
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.2
ifaceAsyn
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.3
ifaceBri
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.4
ifacePri
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.5
ifacePots
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.6
ifaceGBIC
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.3.7
chips
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4
chip68020Cpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.1
chip68340Cpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.2
chip68302Cpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.3
chip68360Cpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.4
chip860TCpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.5
chipRtc1
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.21
chipRtc2
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.22
chipRtc3
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.23
chipRtc4
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.24
chipRam1mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.31
chipRam2mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.32
chipRam3mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.33
chipRam4mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.34
chipRam6mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.36
chipRam8mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.38
chipRam12mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.42
chipRam16mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.46
chipRam20mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.50
chipRam32mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.62
chipFlash1mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.71
chipFlash2mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.72
chipFlash3mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.73
chipFlash4mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.74
chipFlash6mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.76
chipFlash8mb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.78
chipPem
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.1.4.120
traps
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.2
sysinfo
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3
fanAndPs
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.1
fanAndPsRpsConnectionStatus
OBJECT-TYPE
The status of the Redundant Power Supply (RPS) connection, ie, whether an RPS is actually connected or not, regardless of whether the RPS is on or not. not-supported means that an RPS is not supported in this hardware platform, connected means that the RPS is connected, not-connected means that the RPS is not connected, and not-monitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON.
1.3.6.1.4.1.207.8.4.4.3.1.1INTEGER {non-supported(0), connected(1), not-connected(2), not-monitoring(3)}read-onlymandatory
fanAndPsMainPSUStatus
OBJECT-TYPE
The status of the main Power Supply. on means that the power supply is present and fully operational. off means that the power supply is totally off (and obviously only applies to systems with a redundant power supply). faulty means that the main power supply is delivering power but that a component of the power supply is faulty. This applies to systems like SwitchBlade which have 3 power supplies but do not provide individual power supply monitoring. Also, in the case of SwitchBlade, power supply status includes the status of the fans in the power supply.
1.3.6.1.4.1.207.8.4.4.3.1.2INTEGER {on(1), off(2), faulty(3)}read-onlymandatory
fanAndPsRedundantPSUStatus
OBJECT-TYPE
The status of the redundant Power Supply. non-supported means this device does not support redundant power supplies, on means that the redundant power supply is connected and able to supply system power if required, off means that the redundant power supply is either not connected or is connected and is not able to supply system power if required, and not-monitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON.
1.3.6.1.4.1.207.8.4.4.3.1.3INTEGER {non-supported(0), on(1), off(2), not-monitoring(3)}read-onlymandatory
fanAndPsRpsMonitoringStatus
OBJECT-TYPE
The current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this variable to on. The value non-supported means that this device does not support redundant power supplies. Only the values on or off may be written to this variable. If this variables reads as non-supported, an attempt to write to this variable will result in a bad value error.
1.3.6.1.4.1.207.8.4.4.3.1.4INTEGER {non-supported(0), on(1), off(2)}read-writemandatory
fanAndPsMainFanStatus
OBJECT-TYPE
The status of the main Power Supply fan. non-supported means that this device does not support monitoring on the main power supply fan, or that there is no main power supply fan. The warning means the fan's speed is outside 30% of the expected speed.
1.3.6.1.4.1.207.8.4.4.3.1.5INTEGER {non-supported(0), ok(1), not-ok(2), warning(3)}read-onlymandatory
fanAndPsRedundantFanStatus
OBJECT-TYPE
The status of the redundant Power Supply Fan. non-supported means this device does not support redundant power supplies, ok means that the redundant power supply fan is running, not-ok means that the redundant power supply fan is not running, and not-monitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON.
1.3.6.1.4.1.207.8.4.4.3.1.6INTEGER {non-supported(0), ok(1), not-ok(2), not-monitoring(3)}read-onlymandatory
fanAndPsTemperatureStatus
OBJECT-TYPE
The status of temperature in this device. ok means that the device is not capable of monitoring temperature or that the temperature is OK, not-ok means that the temperature is being monitored and is currently out of the range 0C - 45C.
1.3.6.1.4.1.207.8.4.4.3.1.7INTEGER {ok(1), not-ok(2)}read-onlymandatory
fanAndPsFanTrayPresent
OBJECT-TYPE
The status of the presence of the fan tray in this system. Systems which do not support a fan tray return the value non-supported. Upon removal of the fan tray there is a short period (20s) before the value of this variable is changed to not-present. This is to allow for scheduled replacement and/or cleaning of the fan tray.
1.3.6.1.4.1.207.8.4.4.3.1.8INTEGER {non-supported(0), present(1), not-present(2)}read-onlymandatory
fanAndPsFanTrayStatus
OBJECT-TYPE
The status of the fan tray in this system. Systems which do not support a fan tray return the value non-supported. The value ok is returned if all fans in the fan tray are running at full speed. The value not-ok is returned if one of more of the fan tray fans is running slow or has stalled.
1.3.6.1.4.1.207.8.4.4.3.1.9INTEGER {non-supported(0), ok(1), not-ok(2)}read-onlymandatory
fanAndPsMainMonitoringStatus
OBJECT-TYPE
The current status of main power supply monitoring. The monitoring of the main power supply and its fan is always enabled by those systems that support it. Systems which do not support main power supply or fan monitoring report a value of not-supported. The value ok is returned for those systems that do support main power supply and fan monitoring, and where the monitoring operation is reporting valid information (refer to fanAndPsMainFanStatus for the current status of the system). When main power supply and fan monitoring is failing, the value not-ok is returned.
1.3.6.1.4.1.207.8.4.4.3.1.10INTEGER {non-supported(0), ok(1), not-ok(2)}read-onlymandatory
fanAndPsPsuStatusTable
OBJECT-TYPE
The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table represents the status of one of the power supplies in AT8948 system. Each power supply has its own board ID.
1.3.6.1.4.1.207.8.4.4.3.1.11not-accessiblemandatory
fanAndPsPsuStatusEntry
OBJECT-TYPE
A single entry of AT8948 fanAndPsPsuStatusTable, indexed by fanAndPsPsuNumber field.
1.3.6.1.4.1.207.8.4.4.3.1.11.1not-accessiblemandatory
fanAndPsPsuNumber
OBJECT-TYPE
The PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.1INTEGERread-onlymandatory
fanAndPsPsuPresent
OBJECT-TYPE
The PSU present state, displayed as 'yes' if present, or 'no' if absent.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.2INTEGER {yes(0), no(1)}read-onlymandatory
fanAndPsPsuType
OBJECT-TYPE
The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.3INTEGER {ac(0), dc(1), fan(2), not-present(3), not-supported(4)}read-onlymandatory
fanAndPsPsuFan
OBJECT-TYPE
The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.4INTEGER {ok(0), fail(1), not-present(2), not-supported(3)}read-onlymandatory
fanAndPsPsuTemperature
OBJECT-TYPE
The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.5INTEGER {good(0), high(1), not-present(2), not-supported(3)}read-onlymandatory
fanAndPsPsuPower
OBJECT-TYPE
The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.6INTEGER {good(0), bad(1), not-present(2), not-supported(3)}read-onlymandatory
fanAndPsAccelFanStatus
OBJECT-TYPE
The status of the accelerator card fans. Non-supported means this device does not support monitoring of the accelerator card fans.
1.3.6.1.4.1.207.8.4.4.3.1.12INTEGER {non-supported(0), ok(1), not-ok(2)}read-onlymandatory
restart
OBJECT-TYPE
A router/switch restart request. A management station can remotely instruct an ATI router/switch to action a warm or cold restart. Once all the appropriate internal checks have been made, the router/switch will acknowledge the request via normal SNMP channels. The restart instruction will be actioned after waiting for a period of 5 seconds, this is because the SNMP acknowledgement packet needs time to reach the management station. Once the request has been actioned, it can not be cancelled and communication with the router/switch will be lost during system initialisation.
1.3.6.1.4.1.207.8.4.4.3.2INTEGER {restart-none(0), restart-warm(1), restart-cold(2)}write-onlymandatory
cpu
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.3
cpuUtilisationMax
OBJECT-TYPE
Maximum CPU utilisation since the router was last restarted. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.1INTEGER (0..100)read-onlymandatory
cpuUtilisationAvg
OBJECT-TYPE
Average CPU utilisation since the router was last restarted. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.2INTEGER (0..100)read-onlymandatory
cpuUtilisationAvgLastMinute
OBJECT-TYPE
Average CPU utilisation over the past minute. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.3INTEGER (0..100)read-onlymandatory
cpuUtilisationAvgLast10Seconds
OBJECT-TYPE
Average CPU utilisation over the past ten seconds. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.4INTEGER (0..100)read-onlymandatory
cpuUtilisationAvgLastSecond
OBJECT-TYPE
Average CPU utilisation over the past second. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.5INTEGER (0..100)read-onlymandatory
cpuUtilisationMaxLast5Minutes
OBJECT-TYPE
Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.6INTEGER (0..100)read-onlymandatory
cpuUtilisationAvgLast5Minutes
OBJECT-TYPE
Average CPU utilisation over the past 5 minutes. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.7INTEGER (0..100)read-onlymandatory
sysTemperature
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.4
generalTemperature
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.4.1
generalTemperatureSupported
OBJECT-TYPE
The value supported indicates general temperature is displayed by the device. The value not-supported indicates the device displays specific temperature information or none at all.
1.3.6.1.4.1.207.8.4.4.3.4.1.1INTEGER {not-supported(0), supported(1)}read-onlymandatory
generalTemperatureActualTemp
OBJECT-TYPE
The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
1.3.6.1.4.1.207.8.4.4.3.4.1.2INTEGERread-onlymandatory
generalTemperatureStatus
OBJECT-TYPE
The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. not-ok indicates the temperature is being monitored and is currently above the threshold temperature (displayed in generalTemperatureThreshold).
1.3.6.1.4.1.207.8.4.4.3.4.1.3INTEGER {ok(1), not-ok(2)}read-onlymandatory
generalTemperatureThreshold
OBJECT-TYPE
The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a not-ok status.
1.3.6.1.4.1.207.8.4.4.3.4.1.4INTEGERread-writemandatory
sbTemperature
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.4.2
sbTempTable
OBJECT-TYPE
The table of SwitchBlade sysTemperature. Each entry in the table represents temperature monitoring from one of the CPU cards which may be present in the SwitchBlade system.
1.3.6.1.4.1.207.8.4.4.3.4.2.1not-accessiblemandatory
sbTempEntry
OBJECT-TYPE
A single entry of SwitchBlade sysTemperature
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1not-accessiblemandatory
sbTempIndex
OBJECT-TYPE
The board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is master(1).
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1INTEGER {master(1), slave(2)}read-onlymandatory
sbTempActualTemperature
OBJECT-TYPE
The actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals.
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2INTEGERread-onlymandatory
sbTempFixedThresholdStatus
OBJECT-TYPE
The temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable represents whether the actual temperature is above the threshold (value is crossover(2)) or below the threshold (value is normal(1)). If the temperature is exactly the same as the fixed temperature threshold, the value of this variable reads as normal(1).
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3INTEGER {normal(1), crossover(2)}read-onlymandatory
sbTempSettableThresholdStatus
OBJECT-TYPE
The temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. This variable represents whether the actual temperature is above the threshold (value is crossover(2)) or below the threshold (value is normal(1)). When the value of this variable is undefined(3), no settable threshold has been specified and the value of sbTempSettableThreshold is not used.
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4INTEGER {normal(1), crossover(2), undefined(3)}read-onlymandatory
sbTempSettableThreshold
OBJECT-TYPE
The value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTempSettableThresholdStatus is not set to undefined(3).
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5INTEGER (30..100)read-writemandatory
sbTempFixedThreshold
OBJECT-TYPE
The value of the fixed temperature threshold. This value is fixed for both CPU cards, and cannot be set.
1.3.6.1.4.1.207.8.4.4.3.4.2.2INTEGERread-onlymandatory
acceleratorTemperature
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.4.3
acceleratorTemperatureSupported
OBJECT-TYPE
The value supported indicates whether accelerator card temperature is displayed by the device. The value not-supported indicates the device does not display specific accelerator card temperature information.
1.3.6.1.4.1.207.8.4.4.3.4.3.1INTEGER {not-supported(0), supported(1)}read-onlymandatory
acceleratorTemperatureActualTemp
OBJECT-TYPE
The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
1.3.6.1.4.1.207.8.4.4.3.4.3.2INTEGERread-onlymandatory
acceleratorTemperatureStatus
OBJECT-TYPE
The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. not-ok indicates the temperature is being monitored and is currently above the threshold temperature (displayed in generalTemperatureThreshold).
1.3.6.1.4.1.207.8.4.4.3.4.3.3INTEGER {ok(1), not-ok(2)}read-onlymandatory
acceleratorTemperatureThreshold
OBJECT-TYPE
The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a not-ok status.
1.3.6.1.4.1.207.8.4.4.3.4.3.4INTEGERread-writemandatory
atContactDetails
OBJECT-TYPE
The contact details for Allied Telesyn inc.
1.3.6.1.4.1.207.8.4.4.3.5DisplayString (SIZE(0..255))read-onlymandatory
bbrNvs
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.6
memory
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.3.7
freeMemory
OBJECT-TYPE
Percentage of free memory still available on device
1.3.6.1.4.1.207.8.4.4.3.7.1INTEGER (0..100)read-onlymandatory
totalBuffers
OBJECT-TYPE
Total number of buffers available on device
1.3.6.1.4.1.207.8.4.4.3.7.2INTEGERread-onlymandatory
realTimeClockStatus
OBJECT-TYPE
Shows the status of the real time clock
1.3.6.1.4.1.207.8.4.4.3.8INTEGER {invalid(0), normal(1)}read-onlymandatory
hostId
OBJECT-TYPE
Host Identifier of this device
1.3.6.1.4.1.207.8.4.4.3.9INTEGER (0..32)read-writemandatory
modules
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4
ethernet
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.23
ethIntTable
OBJECT-TYPE
The table of Ethernet interfaces.
1.3.6.1.4.1.207.8.4.4.4.23.1not-accessiblemandatory
ethIntEntry
OBJECT-TYPE
A single entry in the Ethernet interfaces table.
1.3.6.1.4.1.207.8.4.4.4.23.1.1not-accessiblemandatory
ethIntIndex
OBJECT-TYPE
The ifIndex of the Ethernet interface.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.1INTEGERread-onlymandatory
ethIntBoardIndex
OBJECT-TYPE
The index in the arBoardTable of the board on which this Ethernet interface resides. If this Ethernet interface is not found, the value of this object is 0.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.2INTEGERread-onlymandatory
ethIntBoardPosition
OBJECT-TYPE
The position on this Ethernet interface's board of this Ethernet interface. If this Ethernet interface is not found, the value of this object is 0.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.3INTEGERread-onlymandatory
ethIntDuplexMode
OBJECT-TYPE
The duplex mode of this Ethernet interface. The value unknown is returned when the interface cannot or has not yet made a determination of its duplex mode, or when the interface cannot be found.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.4INTEGER {full-duplex(1), half-duplex(2), unknown(3)}read-onlymandatory
flash
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.31
flashGetFailure
OBJECT-TYPE
The number of flash get operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.1INTEGERread-onlymandatory
flashOpenFailure
OBJECT-TYPE
The number of flash open operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.2INTEGERread-onlymandatory
flashReadFailure
OBJECT-TYPE
The number of flash read operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.3INTEGERread-onlymandatory
flashCloseFailure
OBJECT-TYPE
The number of flash close operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.4INTEGERread-onlymandatory
flashCompleteFailure
OBJECT-TYPE
The number of flash complete operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.5INTEGERread-onlymandatory
flashWriteFailure
OBJECT-TYPE
The number of flash write operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.6INTEGERread-onlymandatory
flashCreateFailure
OBJECT-TYPE
The number of flash create operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.7INTEGERread-onlymandatory
flashPutFailure
OBJECT-TYPE
The number of flash put operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.8INTEGERread-onlymandatory
flashDeleteFailure
OBJECT-TYPE
The number of flash delete operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.9INTEGERread-onlymandatory
flashCheckFailure
OBJECT-TYPE
The number of flash check operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.10INTEGERread-onlymandatory
flashEraseFailure
OBJECT-TYPE
The number of flash erase operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.11INTEGERread-onlymandatory
flashCompactFailure
OBJECT-TYPE
The number of flash compaction operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.12INTEGERread-onlymandatory
flashVerifyFailure
OBJECT-TYPE
The number of flash verify operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.13INTEGERread-onlymandatory
cc
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.37
ccDetailsTable
OBJECT-TYPE
The table of call details parameters.
1.3.6.1.4.1.207.8.4.4.4.37.1not-accessiblemandatory
ccDetailsEntry
OBJECT-TYPE
A single entry of ISDN call details. This contains the parameters of a single ISDN call details.
1.3.6.1.4.1.207.8.4.4.4.37.1.1not-accessiblemandatory
ccDetailsIndex
OBJECT-TYPE
The index of the call details entry in the call details table. When an entry is created in this table, the index does not have to be written. However, to reference the values that are written, an unused index must be found by reading the index values of the table until a no such object error is returned. Attempting to create a row by using an already used index will result in simply changing the parameters of an existing call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.1INTEGER (1..128)read-onlymandatory
ccDetailsName
OBJECT-TYPE
The name of the ISDN call details. This must be unique for all ISDN call details, when comparisons are done ignoring the case of letters. Valid characters in the ISDN call name include 0-9, a-z, A-Z and '_'. A name consisting of all digits is not valid. Setting this object is mandatory on row creation. However, this object cannot be set for an existing call. This is because for the command line interface calls are identified by name. There is one exception. Setting ccDetailsName to an empty string will cause the call details to be deleted.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.2DisplayString (SIZE(0..15))read-writemandatory
ccDetailsRemoteName
OBJECT-TYPE
The remote ISDN call name. This name can be referenced by certain other call details parameters related with setting up the Q.931 SETUP message for outgoing calls, or searching for calls for incoming calls. Valid characters in the ISDN remote call name include 0-9, a-z, A-Z and '_'. A remote name consisting of all digits is valid.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.3DisplayString (SIZE(0..15))read-writemandatory
ccDetailsCalledNumber
OBJECT-TYPE
The number called when this call details is activated. The number should include all telephone network access codes, country codes and area codes required to make a call from the particular ISDN interface. Setting this object is mandatory on row creation.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.4DisplayString (SIZE(0..31))read-writemandatory
ccDetailsCallingNumber
OBJECT-TYPE
The number used as the calling number when this call is activated. The calling number can optionally be placed in the outgoing SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.5DisplayString (SIZE(0..31))read-writemandatory
ccDetailsAlternateNumber
OBJECT-TYPE
The number called when all retries with the main called number have failed. In this event, the router tries once with the alternate number, then checks the ccDetailsKeepup object to determine whether to try again with the main number.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.6DisplayString (SIZE(0..31))read-writemandatory
ccDetailsEnabled
OBJECT-TYPE
Whether this ISDN call is enabled or disabled for incoming and outgoing calls. If the call details entry is disabled, all existing active calls based on this call details entry are left active.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.7INTEGER {disabled(1), enabled(2)}read-writemandatory
ccDetailsDirection
OBJECT-TYPE
The direction for which calls may be made or received using this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.8INTEGER {in-only(1), out-only(2), both(3)}read-writemandatory
ccDetailsPrecedence
OBJECT-TYPE
The precedence of this call details entry in the event of call collision. Call collision occurs when an incoming call for a given details entry is detected while an outgoing call is waiting to complete. This object configures whether the router treats the incoming or outgoing call as having precedence. Since the device at the other end will also probably be experiencing a call collision, the precedence should be configured to the opposite value at the other end. Setting this object is mandatory on row creation.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.9INTEGER {in(1), out(2)}read-writemandatory
ccDetailsHoldupTime
OBJECT-TYPE
The time, in seconds, that active calls created from this call details should be held up after initial activation. The call will be held up for at least this time, unless cleared from the network. Thus, for example, PPP idle timeouts will not bring the call down.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.10INTEGER (0..7200)read-writemandatory
ccDetailsPreferredIfIndex
OBJECT-TYPE
The ifIndex of an ISDN interface on this router which is the preferred ISDN interface on which to make an outgoing call using this call details entry. The ifIndex, if not 0, should reference the ifEntry which contains information about the entire ISDN interface, at the lowest layer. If a channel is not available on this interface, the call can try other interfaces in order to make the call. This object is not used on incoming calls. If the value of this object is set to 0, no interface will be preferred over any other. If the value of this object does not reference the ifEntry for the entire ISDN interface, no interface will be preferred.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.11InterfaceIndexOrZeroread-writemandatory
ccDetailsRequiredIfIndex
OBJECT-TYPE
The ifIndex of an ISDN interface on this router which is the required ISDN interface on which to make an outgoing call using this call details entry. The ifIndex, if not 0, must reference the ifEntry which contains information about the entire ISDN interface, at the lowest layer. If a channel is not available on this interface, the call fails. This object is not used on incoming calls. If the value of this object is set to 0, no interface will be required. If the value of this object does not reference the ifEntry for the entire ISDN interface, no interface will be required.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.12InterfaceIndexOrZeroread-writemandatory
ccDetailsPriority
OBJECT-TYPE
The priority of calls generated from this call details entry. The priority determines whether calls can be bumped for higher priority calls. The value of priority falls into ranges: 0-19 - call bumped by incoming or outgoing, voice or data calls 20-39 - call bumped by outgoing voice and incoming or outgoing data calls 40-59 - call bumped by emergency voice calls or incoming or outgoing data calls 60-99 - call bumped by emergency voice calls or outgoing data calls. Note that when the call is bumped by a data call, the data call must have higher priority than the call being bumped.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.13INTEGER (0..99)read-writemandatory
ccDetailsRetryT1
OBJECT-TYPE
The time in seconds between retries of calls generated from this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.14INTEGER (5..120)read-writemandatory
ccDetailsRetryN1
OBJECT-TYPE
The number of retries in a retry group for calls generated from this call details entry. Note that the default value means that by default the call will not be retried.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.15INTEGER (0..10)read-writemandatory
ccDetailsRetryT2
OBJECT-TYPE
The time in seconds between retry groups for retries of calls generated from this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.16INTEGER (300..1200)read-writemandatory
ccDetailsRetryN2
OBJECT-TYPE
The number of retry groups for calls generated from this call details entry. Note that the default value means that by default no retry groups will be attempted.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.17INTEGER (0..5)read-writemandatory
ccDetailsKeepup
OBJECT-TYPE
A flag indicating whether calls generated from this call details entry should be kept up always. Inspection of this flag takes place when a call is cleared from an external source. If set to 'yes', the call will be retried.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.18INTEGER {no(1), yes(2)}read-writemandatory
ccDetailsOutSetupCli
OBJECT-TYPE
The CLI information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no CLI information in placed in the SETUP message. The value 'calling' means that the calling number from the call details entry is placed in the SETUP message. The value 'interface' means that the Q.931 interface number for the interface and DLC on which the call is made is placed in the SETUP message. The value 'nonumber' means that the CLI information element is placed in the SETUP message with no number information. The network will fill the number in.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.19INTEGER {off(1), calling(2), interface(3), nonumber(4)}read-writemandatory
ccDetailsOutSetupUser
OBJECT-TYPE
The user-user information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no user-user information in placed in the SETUP message. The value 'local' means that the call name from the call details entry is placed in the SETUP message. The value 'remote' means that the remote call name from the call details entry is placed in the SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.20INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsOutSetupCalledSub
OBJECT-TYPE
The called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no called subaddress information in placed in the SETUP message. The value 'local' means that the call name from the call details entry is placed in the SETUP message. The value 'remote' means that the remote call name from the call details entry is placed in the SETUP message. Note that the action of this object is overridden by the value of the object ccDetailsOutSubaddress.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.21INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsOutSubaddress
OBJECT-TYPE
This object gives a way to override the called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoing call, as given by the ccDetailsOutSetupCalledSub object. The object is an arbitrary string of ASCII characters, from 0 to 31 characters long.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.22DisplayString (SIZE(0..31))read-writemandatory
ccDetailsCallback
OBJECT-TYPE
A flag indicating whether or not to call back the caller when an incoming call is generated from this call details entry. If set to 'yes', the incoming call will be cleared, and after a short delay, an outgoing call will be activated for this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.23INTEGER {no(1), yes(2)}read-writemandatory
ccDetailsCallbackDelay
OBJECT-TYPE
The time, in tenths of a second, which the router will wait after clearing an incoming call whose call details entry specified that the caller should be called back before making the return call. The purpose of this object is to allow the user to specify a delay in callback which will allow the network to properly clear the call at both this end and the remote end.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.24INTEGER (0..100)read-writemandatory
ccDetailsInSetupCalledSubSearch
OBJECT-TYPE
Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the called subaddress information in the incoming SETUP message. The value 'off' means that this call details entry is not used in the search. The value 'local' means that the call details entry is used in the search and the called subaddress information is compared with the call details entry name. The value 'remote' means that the call details entry is used in the search and the called subaddress information is compared with the call details entry remote name. A number of searches are carried out until a matching call is found. First a search against the called subaddress in the SETUP message, then a search against the user-user information in the SETUP message, then a search against the calling number information in the SETUP message, then a search for any call that is configured to respond to any incoming call.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.25INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsInSetupUserSearch
OBJECT-TYPE
Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the user-user information in the incoming SETUP message. The value 'off' means that this call details entry is not used in the search. The value 'local' means that the call details entry is used in the search and the user-user information is compared with the call details entry name. The value 'remote' means that the call details entry is used in the search and the user-user information is compared with the call details entry remote name. A number of searches are carried out until a matching call is found. First a search against the called subaddress in the SETUP message, then a search against the user-user information in the SETUP message, then a search against the calling number information in the SETUP message, then a search for any call that is configured to respond to any incoming call.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.26INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsInSetupCliSearch
OBJECT-TYPE
Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the calling number information in the incoming SETUP message. The value 'off' means that this call details entry is not used in the search. The value 'on' means that the call details entry is used in the search and the calling number information is compared with the call details entry called number. The value 'list' means that the call details entry is used in the search and the calling number information is compared with the numbers on the CLI list reference by the object ccDetailsInSetupCliSearchList. The value 'list' cannot be set by an SNMP management entity. Rather the ccDetailsInSetupCliSearchList object should be set to a non-zero value, which will automatically set this object to 'list'. A number of searches are carried out until a matching call is found. First a search against the called subaddress in the SETUP message, then a search against the user-user information in the SETUP message, then a search against the calling number information in the SETUP message, then a search for any call that is configured to respond to any incoming call.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.27INTEGER {off(1), on(2), list(3)}read-writemandatory
ccDetailsInSetupCliSearchList
OBJECT-TYPE
If the ccDetailsInSetupCliSearch object is set to 'list', this object gives the index of the CLI list to search. The value of CLI list indices is 1..100. The value 0 is returned when the ccDetailsInSetupCliSearch object is not set to 'list'. If the value of this object is set to 0 via SNMP, then the ccDetailsInSetupCliSearch object will be internally set to 'off'. Subsequently setting the value of this object to a non-zero value will set the ccDetailsInSetupCliSearch object to 'list'. Note that when using the command line interface, CLI list indices range from 0 to 99, but when using SNMP they range from 1 to 100. This is because SNMP will not allow a table index to have the value 0, and the command line usage of indices from 0 to 99 is too well established to change.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.28INTEGER (0..100)read-writemandatory
ccDetailsInAnyFlag
OBJECT-TYPE
Determines whether this call details entry will match any incoming call. After all searched for incoming calls have been carried out based on called subaddress, user-user information and calling number, a search is carried out for the first call found with this flag set to 'yes'.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.29INTEGER {no(1), yes(2)}read-writemandatory
ccDetailsInSetupCalledSubCheck
OBJECT-TYPE
Determines whether to perform a check when an incoming call matches this call details entry based on the contents of the called subaddress information in the incoming SETUP message. The value 'off' means that the check is not carried out. The value 'local' means that the check is carried out and the called subaddress information is compared with the call details entry name. The value 'remote' means that the check is carried out and the called subaddress information is compared with the call details entry remote name. A number of checks are optionally carried out once a matching call is found. The first check is against the called subaddress in the SETUP message, then against the user-user information in the SETUP message, then against the calling number information in the SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.30INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsInSetupUserCheck
OBJECT-TYPE
Determines whether to perform a check when an incoming call matches this call details entry based on the contents of the user-user information in the incoming SETUP message. The value 'off' means that the check is not carried out. The value 'local' means that the check is carried out and the user-user information is compared with the call details entry name. The value 'remote' means that the check is carried out and the user-user information is compared with the call details entry remote name. A number of checks are optionally carried out once a matching call is found. The first check is against the called subaddress in the SETUP message, then against the user-user information in the SETUP message, then against the calling number information in the SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.31INTEGER {off(1), local(2), remote(3)}read-writemandatory
ccDetailsInSetupCliCheck
OBJECT-TYPE
Determines whether to perform a check and which check to perform when an incoming call matches this call details entry based on the contents of the calling number information in the incoming SETUP message. The value 'off' means that the check is not carried out. The value 'present' means that the check is carried out only if calling number information is present. The value 'required' means that the calling number must be present for the check to pass. When the check is carried out, the calling number information is compared with the numbers in the CLI list referenced by the object ccDetailsInSetupCliCheckList. A number of checks are optionally carried out once a matching call is found. The first check is against the called subaddress in the SETUP message, then against the user-user information in the SETUP message, then against the calling number information in the SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.32INTEGER {off(1), present(2), required(3)}read-writemandatory
ccDetailsInSetupCliCheckList
OBJECT-TYPE
If the ccDetailsInSetupCliCheck object is set to 'present' or 'required', this object gives the index of the CLI list to check against. The value of CLI list indices is 1..100. The value 0 means that no list to check against is defined and the check immediately fails. Note that when using the command line interface, CLI list indices range from 0 to 99, but when using SNMP they range from 1 to 100. This is because SNMP will not allow a table index to have the value 0, and the command line usage of indices from 0 to 99 is too well established to change.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.33INTEGER (0..100)read-writemandatory
ccDetailsUserType
OBJECT-TYPE
The type of user of this call. The value 'attach' means that users have to attach to this call before the call can be used for outgoing or incoming calls. The value 'ppp' means that for incoming calls only dynamic PPP interfaces will be created whenever this call details entry is matched.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.34INTEGER {attach(1), ppp(2)}read-writemandatory
ccDetailsLoginType
OBJECT-TYPE
The type of login for calls generated using this call details entry, for incoming calls only. Incoming calls can be configured to go through a logging in phase before the call is brought up. This object defines which login types are used. The value 'none' means don't do a login phase. The value 'userdb' means use the user database on the router to check login parameters. The value 'radius' means use the router's configured RADIUS servers to check the login parameters. The values 'pap-tacacs', 'chap' and 'pap-radius' apply only when the user is 'ppp' and determine how the dynamic PPP interface are configured for authentication. The value 'pap-tacacs' means use PAP to authenticate and use the TACACS server to check the login parameters. The value 'pap-radius' means use PAP to authenticate and use the RADIUS server to check the login parameters. The value 'chap' means use CHAP to authenticate. The value 'tacacs' means use the TACACS server to check login parameters. The value 'all' means use the user database, TACACS and RADIUS to check the login parameters. The login parameters for values 'userdb', 'radius', 'tacacs' and 'all' are determined by the ccDetailsUsername and ccDetailsPassword objects.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.35INTEGER {none(1), userdb(2), radius(3), pap-tacacs(4), chap(5), pap-radius(6), tacacs(7), all(8)}read-writemandatory
ccDetailsUsername
OBJECT-TYPE
The source of the username when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no username is defined. The value 'cli' means take the username from the calling number information in the SETUP message. The value 'calledsub' means take the username from the called subaddress information in the SETUP message. The value 'useruser' means take the username from the user-user information in the SETUP message. The value 'callname' means take the username from the call details entry name.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.36INTEGER {none(1), cli(2), calledsub(3), useruser(4), callname(5)}read-writemandatory
ccDetailsPassword
OBJECT-TYPE
The source of the password when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no password is defined. The value 'cli' means take the password from the calling number information in the SETUP message. The value 'calledsub' means take the password from the called subaddress information in the SETUP message. The value 'useruser' means take the password from the user-user information in the SETUP message. The value 'callname' means take the password from the call details entry name.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.37INTEGER {none(1), cli(2), calledsub(3), useruser(4), callname(5)}read-writemandatory
ccDetailsBumpDelay
OBJECT-TYPE
The time, in tenths of a second, which the router will wait after clearing an existing call which has been bumped to make way for a call based on this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.38INTEGER (0..100)read-writemandatory
ccDetailsDataRate
OBJECT-TYPE
The data rate to use for active calls based on this call details entry. The actual data rate for outgoing calls is determined by both this object and the data rate parameter for the Q.931 interface chosen for the call. If either this object or the interface object specify a rate of 56k, then 56k will be the rate for the call. Otherwise, the default rate of 64k will be used. This allows interoperability between ISDNs which only allow 56k of data on a B channel.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.39INTEGER {rate-64k(1), rate-56k(2)}read-writemandatory
ccDetailsPppTemplate
OBJECT-TYPE
The PPP template to use when creating dynamic PPP interfaces for calls generated from this call details entry. The value 33 represents a default PPP template, the values 1 to 32 represent PPP templates that are currently defined in the router. Note that when using the command line interface, PPP template indices range from 0 to 31, but when using SNMP they range from 1 to 32. This is because SNMP will not allow a table index to have the value 0. While there is no PPP template table accessible via SNMP, if there was, the indices of the table would have to range from 1 to 32.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.40INTEGER (1..33)read-writemandatory
ccDetailsUserModule
OBJECT-TYPE
The module ID of the user module currently attached to this ISDN call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.41INTEGERread-onlymandatory
ccDetailsNumberAttachments
OBJECT-TYPE
The number of attachments from the user module currently attached to this call details entry. The ccAttachmentsTable gives the actual attachments for each call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.42INTEGERread-onlymandatory
ccCliListTable
OBJECT-TYPE
The table of CLI list entries.
1.3.6.1.4.1.207.8.4.4.4.37.2not-accessiblemandatory
ccCliListEntry
OBJECT-TYPE
A single entry in the CLI list table. This contains a single number, as well as index information.
1.3.6.1.4.1.207.8.4.4.4.37.2.1not-accessiblemandatory
ccCliListListIndex
OBJECT-TYPE
The index of the CLI list. CLI lists from 1 to 100 are defined in the router.
1.3.6.1.4.1.207.8.4.4.4.37.2.1.1INTEGER (1..100)read-onlymandatory
ccCliListEntryIndex
OBJECT-TYPE
The index of the CLI list entry within the CLI list. The minimum CLI list entry is 1. CLI lists are unlimited in length, although internal memory requirements could result in failure to create a given entry. When creating a row in this table, the entry index should be set to index the first empty row. Only one CLI list row in a given list should be created in any one SNMP message. Attempting to create more than one row will result in failure.
1.3.6.1.4.1.207.8.4.4.4.37.2.1.2INTEGERread-onlymandatory
ccCliListNumber
OBJECT-TYPE
The number for this CLI list entry. Setting the number to a zero length string removes the entry from the CLI list, with consequent reshuffling of CLI entry indices. Thus the easiest way to delete an entire CLI list is to repeatedly set the first element in the list to a zero length string. A failure to SET will occur when this is attempted on an empty list.
1.3.6.1.4.1.207.8.4.4.4.37.2.1.3DisplayString (SIZE(0..31))read-writemandatory
ccActiveCallTable
OBJECT-TYPE
The table of ISDN active calls.
1.3.6.1.4.1.207.8.4.4.4.37.3not-accessiblemandatory
ccActiveCallEntry
OBJECT-TYPE
A single entry in the active call table.
1.3.6.1.4.1.207.8.4.4.4.37.3.1not-accessiblemandatory
ccActiveCallIndex
OBJECT-TYPE
The index of the active call. There are 128 possible active calls in the router simultaneously.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.1INTEGER (1..128)read-onlymandatory
ccActiveCallDetailsIndex
OBJECT-TYPE
The index of the call details entry which generated this active call. Thus the index into the ccDetailsTable for this call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.2INTEGER (1..128)read-onlymandatory
ccActiveCallIfIndex
OBJECT-TYPE
The interface index of the interface on which this active call is being made or received. A value of zero indicates that the active has not yet had an interface assigned to it. The ifEntry indexed by this object is the ifEntry for the entire ISDN interface, not the ifEntry for the active call's B channel.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.3InterfaceIndexOrZeroread-onlymandatory
ccActiveCallDataRate
OBJECT-TYPE
The data rate in use for this active call. This is determined by the call details setting of data rate, the ISDN interface setting for data rate, and the contents of the bearer capability information in the incoming SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.4INTEGER {rate-64k(1), rate-56k(2)}read-onlymandatory
ccActiveCallState
OBJECT-TYPE
The state of this active call. The value 'null' indicates that this active call does not actually exist, in other words it is in the process of being created or destroyed. The value 'off' means that the active call is just being activated. The value 'try' means that the active call is attempting to establish. The value 'on' means that the active call is established. The value 'wait' means that the active call is waiting to retry. The value 'await1' means that the active call is waiting for authentication to succeed before becoming established.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.5INTEGER {null(1), off(2), try(3), on(4), wait(5), await1(6)}read-onlymandatory
ccActiveCallDirection
OBJECT-TYPE
The direction of this active call. The value 'in' indicates that this active call is an incoming call, the value 'out' indicates that the active call is an outgoing call. The value 'undefined' indicates that the active call has just been created and a direction has not been assigned to it yet.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.6INTEGER {in(1), out(2), undefined(3)}read-onlymandatory
ccActiveCallUserModule
OBJECT-TYPE
The module ID of the user module attached to this ISDN active call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.7INTEGERread-onlymandatory
ccActiveCallUserInstance
OBJECT-TYPE
The instance of the user module attached to this ISDN active call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.8INTEGERread-onlymandatory
ccActiveCallBchannelIndex
OBJECT-TYPE
The B channel number for this active entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a channel which is the D channel. A value of 0 for this entry means that either a B channel is not currently allocated for this call, or that more than one B channel is allocated. In the second case, the management client will have to walk the B channel allocation table looking for channels with the same active call index as this call's.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.9INTEGER (0..31)read-onlymandatory
ccCallLogTable
OBJECT-TYPE
The table of ISDN call log entries.
1.3.6.1.4.1.207.8.4.4.4.37.4not-accessiblemandatory
ccCallLogEntry
OBJECT-TYPE
A single entry in the ISDN call log table.
1.3.6.1.4.1.207.8.4.4.4.37.4.1not-accessiblemandatory
ccCallLogIndex
OBJECT-TYPE
The index of the call log entry. Since the call log table is dynamic, there is no guarantee that this index will continue to refer to the same log entry over time.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.1INTEGERread-onlymandatory
ccCallLogName
OBJECT-TYPE
The name of the call details entry which generated the active call for which this is the log entry.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.2DisplayString (SIZE(0..255))read-onlymandatory
ccCallLogState
OBJECT-TYPE
The state of the log entry. The value 'initial' means that the call is being established. The value 'active' means that the call is currently established. The value 'disconnected' means that the call was disconnected after being established for some time. The value 'cleared' means that the call was cleared abormally while in the establishment phase.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.3INTEGER {initial(1), active(2), disconnected(3), cleared(4)}read-onlymandatory
ccCallLogTimeStarted
OBJECT-TYPE
A string in the format 'dd-mmm-yyyy hh:mm:ss' which gives the start time of the call for which this is the log entry. If the call never reached or has not yet reached the active state, this object will be a zero-length string.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.4DisplayString (SIZE(0..255))read-onlymandatory
ccCallLogDirection
OBJECT-TYPE
The direction of the call for which this is the log entry.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.5INTEGER {in(1), out(2)}read-onlymandatory
ccCallLogDuration
OBJECT-TYPE
The duration in seconds, of the call for which this is the log entry. A value of 0 in this field means either that the call has just started, that the call was cleared before becoming established, or that the call is still active. In other words, a non-zero value is present in this object only for calls which reach establishment and have since been cleared.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.6INTEGERread-onlymandatory
ccCallLogRemoteNumber
OBJECT-TYPE
For incoming calls, the calling number, if this was made available in the SETUP message. For outgoing calls, the number dialed. If the number was not available, this object is a zero length string.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.7DisplayString (SIZE(0..255))read-onlymandatory
ccAttachmentTable
OBJECT-TYPE
The table of call detail attachment entries.
1.3.6.1.4.1.207.8.4.4.4.37.5not-accessiblemandatory
ccAttachmentEntry
OBJECT-TYPE
A single entry in the attachment table.
1.3.6.1.4.1.207.8.4.4.4.37.5.1not-accessiblemandatory
ccAttachmentDetailsIndex
OBJECT-TYPE
The index of the call details entry to which this attachment entry belongs.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.1INTEGER (1..128)read-onlymandatory
ccAttachmentEntryIndex
OBJECT-TYPE
The index of the attachment entry within the attachment list.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.2INTEGERread-onlymandatory
ccAttachmentActiveCallIndex
OBJECT-TYPE
The index of the active call for this attachment. A value of 0 indicates that there is currently no active call for this attachment. A value of 1 to 128 references the active call currently in place for this attachment.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.3INTEGER (0..128)read-onlymandatory
ccAttachmentUserInstance
OBJECT-TYPE
The instance of the user module attached to the ISDN active call for this attachment. This object should return the same value as the object ccActiveCallUserInstance for the active call indexed by ccAttachmentActiveCallIndex, if this is not 0.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.4INTEGERread-onlymandatory
ccBchannelTable
OBJECT-TYPE
The table of B channel attachment entries.
1.3.6.1.4.1.207.8.4.4.4.37.6not-accessiblemandatory
ccBchannelEntry
OBJECT-TYPE
A single entry in the B channel attachment table.
1.3.6.1.4.1.207.8.4.4.4.37.6.1not-accessiblemandatory
ccBchannelIfIndex
OBJECT-TYPE
The interface index of the interface which this B channel entry is on. The ifEntry indexed by this object is the ifEntry for the entire ISDN interface, not the ifEntry for the active call's B channel.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.1INTEGERread-onlymandatory
ccBchannelChannelIndex
OBJECT-TYPE
The B channel number for this B channel entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a channel which is the D channel.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.2INTEGER (1..31)read-onlymandatory
ccBchannelAllocated
OBJECT-TYPE
A flag indicating whether this B channel is actually allocated to a call or not.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.3INTEGER {no(1), yes(2)}read-onlymandatory
ccBchannelCallType
OBJECT-TYPE
The type of call on this B channel. If the B channel is not allocated, the call type will be undefined.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.4INTEGER {undefined(1), data(2), voice(3), x25(4)}read-onlymandatory
ccBchannelActiveCallIndex
OBJECT-TYPE
The index of the active call which is currently attached to this B channel. If the value of this object is 0 the channel is either not allocated, or is not allocated to a data call.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.5INTEGER (0..128)read-onlymandatory
ccBchannelPriority
OBJECT-TYPE
The priority of the call which has this B channel allocated to it. This is in the range 0..99 for data calls, 150 for voice calls and 200 for emergency voice calls. A B channel which is not allocated will have a priority of 0.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.6INTEGERread-onlymandatory
ccBchannelDirection
OBJECT-TYPE
The direction of the call which has this B channel allocated to it. If this B channel is not allocated the value will be 'unallocated'.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.7INTEGER {in(1), out(2), unallocated(3)}read-onlymandatory
bri
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.41
briIntTable
OBJECT-TYPE
The table of BRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.41.1not-accessiblemandatory
briIntEntry
OBJECT-TYPE
A single entry in the BRI interfaces table.
1.3.6.1.4.1.207.8.4.4.4.41.1.1not-accessiblemandatory
briIntIndex
OBJECT-TYPE
The ifIndex of the BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.1INTEGERread-onlymandatory
briIntBoardIndex
OBJECT-TYPE
The index in the arBoardTable of the board on which this BRI interface resides.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.2INTEGERread-onlymandatory
briIntBoardPosition
OBJECT-TYPE
The position on this BRI interface's board of this BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.3INTEGERread-onlymandatory
briIntMode
OBJECT-TYPE
The mode of operation of this BRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the entire interface is operating as TDM groups and the value mixed means that some channels in the interface are dedicated to ISDN and some to TDM groups.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.4INTEGER {isdn(1), tdm(2), mixed(3)}read-onlymandatory
briIntTdmChannelMap
OBJECT-TYPE
A bit map of the channels in the BRI interface which are dedicated to TDM. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.5INTEGERread-onlymandatory
briIntIsdnChannelMap
OBJECT-TYPE
A bit map of the channels in the BRI interface which are dedicated to ISDN. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.6INTEGERread-onlymandatory
briChanTable
OBJECT-TYPE
The table of channels on BRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.41.2not-accessiblemandatory
briChanEntry
OBJECT-TYPE
A single entry in the BRI channels table.
1.3.6.1.4.1.207.8.4.4.4.41.2.1not-accessiblemandatory
briChanIntIndex
OBJECT-TYPE
The ifIndex of the BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.1INTEGERread-onlymandatory
briChanChannelIndex
OBJECT-TYPE
The channel index of the BRI channel. Channel B1 has index 1, channel B2 has index 2 and the D channel has index 3.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.2INTEGER (1..3)read-onlymandatory
briChanMode
OBJECT-TYPE
The mode of this BRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use by TDM. For the D channel, this object will always have the value isdn.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.3INTEGER {isdn(1), tdm(2), none(3)}read-onlymandatory
briChanState
OBJECT-TYPE
The state of this BRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. The value active means that the channel is in use, either by an ISDN call or an active TDM group. For the D channel, this object will have the value active if LAPD is using the D channel (either for call control or X.25), or the value inactive otherwise.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.4INTEGER {inactive(1), active(2)}read-onlymandatory
pri
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.42
priIntTable
OBJECT-TYPE
The table of PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.1not-accessiblemandatory
priIntEntry
OBJECT-TYPE
A single entry in the PRI interfaces table.
1.3.6.1.4.1.207.8.4.4.4.42.1.1not-accessiblemandatory
priIntIndex
OBJECT-TYPE
The ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.1INTEGERread-onlymandatory
priIntBoardIndex
OBJECT-TYPE
The index in the arBoardTable of the board on which this PRI interface resides.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.2INTEGERread-onlymandatory
priIntBoardPosition
OBJECT-TYPE
The position on this PRI interface's board of this PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.3INTEGERread-onlymandatory
priIntMode
OBJECT-TYPE
The mode of operation of this PRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the entire interface is operating as TDM groups and the value mixed means that some channels in the interface are dedicated to ISDN and some to TDM groups.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.4INTEGER {isdn(1), tdm(2), mixed(3)}read-onlymandatory
priIntTdmChannelMap
OBJECT-TYPE
A bit map of the channels in the PRI interface which are dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.5INTEGERread-onlymandatory
priIntIsdnChannelMap
OBJECT-TYPE
A bit map of the channels in the PRI interface which are dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.6INTEGERread-onlymandatory
priIntType
OBJECT-TYPE
The type of primary rate interface. E1 has 30 B + D channel, T1 has 23 B + D channel. If the value unknown is returned for this object, the exact PRI type has not yet been determined.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.7INTEGER {e1(1), t1(2), unknown(3)}read-onlymandatory
priChanTable
OBJECT-TYPE
The table of channels on PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.2not-accessiblemandatory
priChanEntry
OBJECT-TYPE
A single entry in the PRI channels table.
1.3.6.1.4.1.207.8.4.4.4.42.2.1not-accessiblemandatory
priChanIntIndex
OBJECT-TYPE
The ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.1INTEGERread-onlymandatory
priChanChannelIndex
OBJECT-TYPE
The channel index of the PRI channel. Valid channels have indices from 1 to 31. The D channel on an E1 interface has index 16, the D channel on a T1 interface has index 24.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.2INTEGER (1..31)read-onlymandatory
priChanMode
OBJECT-TYPE
The mode of this PRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use by TDM. For the D channel, this object will usually have the value isdn. An exception is if the interface is running common D channel mode and the D channel is reserved for TDM.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.3INTEGER {isdn(1), tdm(2), neither(3)}read-onlymandatory
priChanState
OBJECT-TYPE
The state of this PRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. The value active means that the channel is in use, either by an ISDN call or an active TDM group.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.4INTEGER {inactive(1), active(2)}read-onlymandatory
loader
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.48
loadTable
OBJECT-TYPE
The table of load parameters, dynamic and static.
1.3.6.1.4.1.207.8.4.4.4.48.1not-accessiblemandatory
loadEntry
OBJECT-TYPE
A single entry of load parameters. This contains the parameters required to perform a load from the router.
1.3.6.1.4.1.207.8.4.4.4.48.1.1not-accessiblemandatory
loadIndex
OBJECT-TYPE
There are two sets of load information, dynamic and static. The dynamic information is used once, then cleared. The static information is used whenever the dynamic information is not available. The dynamic information is also used to indicate the current load parameters when a load is in progress.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.1INTEGER {static(1), dynamic(2)}read-writemandatory
loadServer
OBJECT-TYPE
The IP address from which load will load.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.2IpAddressread-writemandatory
loadDestination
OBJECT-TYPE
The destination of the file loaded, either flash or nvs memory, or undefined.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.3INTEGER {undefined(1), nvs(2), flash(3)}read-writemandatory
loadFilename
OBJECT-TYPE
The file name of the file being loaded.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.4DisplayString (SIZE(0..255))read-writemandatory
loadDelay
OBJECT-TYPE
A delay in seconds between the initiation of the load and the start of the load. This allows for time to set up TFTP servers in cases where the terminal and TFTP server are using the same piece of equipment but will not work simultaneously.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.5INTEGERread-writemandatory
loadStatus
OBJECT-TYPE
Status and action object for the load module. The values 1 to 5 are read-only values and reflect the state of the load module. Values 4 and 5 (complete and reset) are 'read-once', that is, if their values are read, either by SNMP or by manager console command, then they will be changed back to idle(1). The action values (6 and 7) cause a start and stop of the load process respectively. Starting the load can only occur if this field has the values 1, 4, or 5. Stopping the load can only occur is this field has the values 2 or 3. Reading the value of the loadStatus after one of actionstart or actionstop has been set will give one of the values 1 to 5. Note: A single exception to the above rules is that if the value of loadStatus is idle(1), then a write of 1 to this variable will succeed without generating an error. This exception is to allow certain SNMP test suites to test this variable without throwing up errors.
1.3.6.1.4.1.207.8.4.4.4.48.2INTEGER {idle(1), wait(2), loading(3), complete(4), reset(5), actionstart(6), actionstop(7)}read-writemandatory
install
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.49
installTable
OBJECT-TYPE
The list of install configurations for the router.
1.3.6.1.4.1.207.8.4.4.4.49.1not-accessiblemandatory
installEntry
OBJECT-TYPE
An entry in the list of install configurations.
1.3.6.1.4.1.207.8.4.4.4.49.1.1not-accessiblemandatory
instIndex
OBJECT-TYPE
The index for the install table. There are four install configurations defined in the router, default, preferred, temporary and current. The router will attempt to use these in the order temporary, preferred, default when it boots. An install that is undefined will be skipped, an install which points to a file which is not present will be skipped. When the temporary install is used, the information is deleted. The current configuration shows what the router currently has installed.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.1INTEGER {temporary(1), preferred(2), default(3), current(4)}read-onlymandatory
instRelDevice
OBJECT-TYPE
The device for the release in the install. If the device is flash the file for the release is given in instRelName. Devices none(1) or flash(3) are invalid for the default(3) release.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.2INTEGER {none(1), eprom(2), flash(3)}read-onlymandatory
instRelName
OBJECT-TYPE
The file name for the release in the install, if the instRelDevice is flash(3). If the instRelDevice is none(1) or eprom(2), this object should be a null string.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.3DisplayString (SIZE(0..255))read-onlymandatory
instRelMajor
OBJECT-TYPE
The major release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set by management. If the release number is a.b.c, the major release number is a.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.4INTEGERread-onlymandatory
instRelMinor
OBJECT-TYPE
The minor release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set by management. If the release number is a.b.c, the major release number is b.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.5INTEGERread-onlymandatory
instPatDevice
OBJECT-TYPE
The device for the patch in the install. The file for the patch is given in instPatName unless the device is none(1).
1.3.6.1.4.1.207.8.4.4.4.49.1.1.6INTEGER {none(1), flash(3), nvs(4)}read-onlymandatory
instPatName
OBJECT-TYPE
The file name for the patch in the install.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.7DisplayString (SIZE(0..255))read-onlymandatory
instRelInterim
OBJECT-TYPE
The interim release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set by management. If the release number is a.b.c, the major release number is c. If the release number is a.b, the interim release number is 0.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.8INTEGERread-onlymandatory
instRelExists
OBJECT-TYPE
Indicates if the release file exists or not. true(1) means it exists, false(2) means it doesn't.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.9INTEGER {true(1), false(2)}read-onlymandatory
instPatExists
OBJECT-TYPE
Indicates if the patch file exists or not. true(1) means it exists, false(2) means it doesn't
1.3.6.1.4.1.207.8.4.4.4.49.1.1.10INTEGER {true(1), false(2)}read-onlymandatory
installHistoryTable
OBJECT-TYPE
The table of descriptions of events in the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.2not-accessiblemandatory
installHistoryEntry
OBJECT-TYPE
A single line describing part of the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.2.1not-accessiblemandatory
instHistIndex
OBJECT-TYPE
The index of this event in the install history. Indices run from 1 to the maximum number. The maximum number is not available as a managed object so this table will have to be traversed in order to find out how large it is.
1.3.6.1.4.1.207.8.4.4.4.49.2.1.1INTEGERread-onlymandatory
instHistLine
OBJECT-TYPE
A line of text describing a single event in the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.2.1.2DisplayString (SIZE(0..255))read-onlymandatory
configFile
OBJECT-TYPE
The name of the file that the router will configure from at boot. The format of the name is the same as that for fileName described above. If the configuration file name is a zero length string, then there is no configuration file defined in the router.
1.3.6.1.4.1.207.8.4.4.4.49.3DisplayString (SIZE(0..255))read-writemandatory
licenceTable
OBJECT-TYPE
The list of release licences in the router.
1.3.6.1.4.1.207.8.4.4.4.49.4not-accessiblemandatory
licenceEntry
OBJECT-TYPE
An entry in the list of release licences.
1.3.6.1.4.1.207.8.4.4.4.49.4.1not-accessiblemandatory
licenceIndex
OBJECT-TYPE
A unique licence index. Licence indices are recalculated every time the router reboots to reflect the current licences on the router. As licences are added, new indices are allocated to the new licences.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.1INTEGERread-onlymandatory
licenceStatus
OBJECT-TYPE
The status of the file. When read, this object will always return a value of ok(1), since the object will not exist if the value is deleting(2). Write the value deleting(2) to this object to delete the file.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.2INTEGER {ok(1), deleting(2)}read-writemandatory
licenceRelease
OBJECT-TYPE
The file name for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.3DisplayString (SIZE(0..255))read-writemandatory
licenceMajor
OBJECT-TYPE
The major release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.4INTEGERread-writemandatory
licenceMinor
OBJECT-TYPE
The minor release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.5INTEGERread-writemandatory
licencePassword
OBJECT-TYPE
The password for this release. The password is a string of hex digits.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.6DisplayString (SIZE(12))read-writemandatory
licenceExpiry
OBJECT-TYPE
A human-readable string that gives the expiry date of this licence.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.7DisplayString (SIZE(0..255))read-onlymandatory
licenceInterim
OBJECT-TYPE
The interim release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.8INTEGERread-writemandatory
createConfigFile
OBJECT-TYPE
The name of a file to create containing the current router configuration. A read from this variable will return the same as the variable configFile. Thus to save the current configuration in the current configuration file, read createConfigFile first, then write the result back to createConfigFile. If this variable is written with the name of an existing file, the file will be replaced with the current configuration.
1.3.6.1.4.1.207.8.4.4.4.49.5DisplayString (SIZE(0..255))read-writemandatory
configFileExist
OBJECT-TYPE
Indicates if the boot configuration file exists or not. true(1) means it exists, false(2) means it doesn't
1.3.6.1.4.1.207.8.4.4.4.49.6INTEGER {true(1), false(2)}read-onlymandatory
currentConfigFile
OBJECT-TYPE
The name of the file that the router is currently configured with. The format of the name is the same as that for fileName described above. If the current configuration file name is a zero length string, then there is no current configuration file defined in the router.
1.3.6.1.4.1.207.8.4.4.4.49.7DisplayString (SIZE(0..255))read-onlymandatory
trigger
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.53
triggerLastTriggerActivated
OBJECT-TYPE
The trigger number of the most recent trigger activated on this router. This is also the variable sent in the trigger trap below. If no triggers have been activated yet since the last restart of this router, this variable will read as 0.
1.3.6.1.4.1.207.8.4.4.4.53.1INTEGERread-onlymandatory
file
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.56
fileTable
OBJECT-TYPE
A list of all the files in the router's non-volatile storage.
1.3.6.1.4.1.207.8.4.4.4.56.1not-accessiblemandatory
fileEntry
OBJECT-TYPE
An entry in the list of files containing information about a single file in the router.
1.3.6.1.4.1.207.8.4.4.4.56.1.1not-accessiblemandatory
fileIndex
OBJECT-TYPE
A unique file index. File indices are recalculated every time the router reboots to reflect the current files on the router. As files are added, new indices are allocated to the new files.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.1INTEGERread-onlymandatory
fileName
OBJECT-TYPE
The name of the file, in the form <name.typ>. The name is up to eight characters long, the type is up to three characters long.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.2DisplayString (SIZE(0..255))read-onlymandatory
fileDevice
OBJECT-TYPE
The device on which the file resides.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.3INTEGER {flash(1), nvs(2)}read-onlymandatory
fileCreationTime
OBJECT-TYPE
The creation date and time for the file, in the format <dd-mmm-yy, hh:mm:ss>.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.4DisplayString (SIZE(0..255))read-onlymandatory
fileStatus
OBJECT-TYPE
The status of the file. When read, this object will always return a value of ok(1), since the object will not exist if the value is deleting(2). Write the value deleting(2) to this object to delete the file.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.5INTEGER {ok(1), deleting(2)}read-writemandatory
fileSize
OBJECT-TYPE
The size, in bytes, of the file.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.6INTEGERread-onlymandatory
fileNumbers
OBJECT-TYPE
The total number of files in FLASH and NVS.
1.3.6.1.4.1.207.8.4.4.4.56.2INTEGERread-onlymandatory
ping
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.58
pingTable
OBJECT-TYPE
The table of ping parameters, dynamic and static.
1.3.6.1.4.1.207.8.4.4.4.58.1not-accessiblemandatory
pingEntry
OBJECT-TYPE
A single entry of ping parameters. This contains the parameters required to perform a ping from the router. The ping specified by the dynamic parameters, can be initiated or stopped at any time by altering the pingStatus accordingly.
1.3.6.1.4.1.207.8.4.4.4.58.1.1not-accessiblemandatory
pingIndex
OBJECT-TYPE
There are two sets of ping information, dynamic and static. The dynamic information is used only once, for the next ping, then automatically replaced with the static information. The static information is used whenever specific dynamic information is not specified. The dynamic information indicates the current ping parameters when a ping is in progress. If static information is not specified, defaults are used. Static information can be changed at any time, but dynamic information cannot be changed while a ping is in progress. A change to the static information when a ping is not currently active, also updates the dynamic information.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.1INTEGER {static(1), dynamic(2)}read-onlymandatory
pingProtocol
OBJECT-TYPE
The protocol that the ping will use. The protocol must match the destination address. Ping supports both IP, IPX, Appletalk, and OSI addresses. The protocol must be specified before the address is set, because when the protocol is changed, address is reset to undefined. The default value for this variable is undefined(0).
1.3.6.1.4.1.207.8.4.4.4.58.1.1.2INTEGER {undefined(0), apple(1), ip(2), ipx(3), osi(4)}read-writemandatory
pingAddress
OBJECT-TYPE
The address specifies the destination address for ping packets for Appletalk, IP, IPX and OSI networks, respectively. The address format must match the protocol being used. The protocol must be specified before the address is set, because changing the protocol resets the address to undefined. The default value for this variable is an undefined address which is coded as a zero length octet string.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.3OCTET STRINGread-writemandatory
pingNumberOfPackets
OBJECT-TYPE
The number of ping packets to transmit.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.4INTEGERread-writemandatory
pingPacketSize
OBJECT-TYPE
The packet size parameter specifies the length in bytes, of data to include in the data portion of the ping packet. The protocol packet header size and the size of headers for the particular link protocol in use have to be added to the packet size to get the total size of the ping packet. The maximum pingPacketSize can be set to is 1500.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.5INTEGER (0..1500)read-writemandatory
pingTimeout
OBJECT-TYPE
Timeout specifies the amount of time to wait for a response to a ping packet. Timeout must be greater than zero.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.6INTEGERread-writemandatory
pingDelay
OBJECT-TYPE
The delay parameter specifies the time interval, in seconds, between ping packets.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.7INTEGERread-writemandatory
pingTrapOnCompletion
OBJECT-TYPE
Specifies whether a trap should be issued on completion of the sequence of pings.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.8INTEGER {true(1), false(2)}read-writemandatory
pingTypeOfService
OBJECT-TYPE
The Type Of Service (TOS) parameter is only valid for IP addresses, and specifies the TOS field in the IP header of the ping packet, as a decimal in the range 0 to 255.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.9INTEGER (0..255)read-writemandatory
pingPattern
OBJECT-TYPE
The pattern parameter specifies the data pattern to use in the data portion of the ping packet.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.10INTEGERread-writemandatory
pingStatus
OBJECT-TYPE
Status and action object for the ping module. A status of '1' indicates that the ping is currently running, the status can be set to '2' to stop the ping. A status of '2' indicates that the ping is currently stopped, the pingStatus can be set to '1' to start the ping. The parameters for the ping can be altered in the pingTable. The destination ping address and protocol have defaults of undefined and must be specified before a ping can be started. The ping statistics are reset to defaults when a ping is started, and updated when the ping stops. Dynamic pingTable information is used only once, for the next ping. Static pingTable information is used for all pings by default, whenever the respective dynamic settings are not specified.
1.3.6.1.4.1.207.8.4.4.4.58.2INTEGER {start-running(1), stop-stopped(2)}read-writemandatory
pingStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.58.3
pingSentPackets
OBJECT-TYPE
The number of ping packets sent to the target in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.1INTEGERread-onlymandatory
pingReceivedPackets
OBJECT-TYPE
The number of packets received from the target in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.2INTEGERread-onlymandatory
pingMinimumRoundTripTime
OBJECT-TYPE
The quickest round trip time taken by any of the ping packets in milliseconds in the last ping. The default before the completion of a ping is negative one.
1.3.6.1.4.1.207.8.4.4.4.58.3.3INTEGERread-onlymandatory
pingAverageRoundTripTime
OBJECT-TYPE
The average round trip time taken by the ping packets in milliseconds in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.4INTEGERread-onlymandatory
pingMaximumRoundTripTime
OBJECT-TYPE
The slowest round trip time taken by any of the ping packets in milliseconds in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.5INTEGERread-onlymandatory
dhcp
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.70
dhcpRangeTable
OBJECT-TYPE
The table of DHCP ranges.
1.3.6.1.4.1.207.8.4.4.4.70.1not-accessiblemandatory
dhcpRangeEntry
OBJECT-TYPE
A single entry of the DHCP range table. This contains information about a single DHCP range configured on this device.
1.3.6.1.4.1.207.8.4.4.4.70.1.1not-accessiblemandatory
dhcpRangeIndex
OBJECT-TYPE
The index of this DHCP range. DHCP ranges are stored in a list which is ordered by range name. The index gives the place in the list. Note that if ranges are added or deleted, the index for a given range will change. Since this table is read-only, this will not have an undue effect, but if in future this table is made read-write, a mechanism will have to be created to lock the indices of the range table while SET operations are proceeding.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.1INTEGERread-onlymandatory
dhcpRangeName
OBJECT-TYPE
The name given to identify this DHCP range. This is the ultimate method for uniquely identifying this range. Names are compared without regard to case, for example >range1< will be treated as the same as >RANGE1<.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.2DisplayString (SIZE(1..15))read-onlymandatory
dhcpRangeBaseAddress
OBJECT-TYPE
The base address of this range. This address defines the lower bound of the range of IP addresses which can be allocated to devices requesting an IP address via DHCP.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.3IpAddressread-onlymandatory
dhcpRangeNumberOfAddresses
OBJECT-TYPE
The number of IP address in this range. This number defines the upper bound of the range of IP addresses which can be allocated to devices requesting an IP address via DHCP.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.4INTEGER (1..256)read-onlymandatory
dhcpRangeGateway
OBJECT-TYPE
The IP address of the BOOTP relay agent which will be relaying DHCP requests for this range. If this address is 0.0.0.0, then there will be no BOOTP relay agent and the range will be allocated to devices directly connected to this device.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.5IpAddressread-onlymandatory
dhcpTrapVariable
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.70.2
dhcpRangeExhaustedGateway
OBJECT-TYPE
Whenever a DHCP client attempts to lease an IP address and the DHCP server cannot provide an address, this variable is set to the gateway address of the DHCP request. The gateway address is the IP address of the gateway acting as a BOOTP relay agent for the request. If there is no gateway, the address will be 0.0.0.0. If the gateway address is non-zero, the DHCP range from which the allocation should have been made will able to be identified by lookup in the DHCP range table.
1.3.6.1.4.1.207.8.4.4.4.70.2.1IpAddressread-onlymandatory
dhcpRangeExhaustedInterface
OBJECT-TYPE
Whenever a DHCP client attempts to lease an IP address and the DHCP server cannot provide an address, this variable is set to the IP address of the interface which received the DHCP request. If the gateway address associated with the failed DHCP request is 0.0.0.0, the interface address will be able to be used to lookup the range that was exhausted and from which the allocation should have been made.
1.3.6.1.4.1.207.8.4.4.4.70.2.2IpAddressread-onlymandatory
dhcpClientTable
OBJECT-TYPE
The table of defined DHCP range client addresses.
1.3.6.1.4.1.207.8.4.4.4.70.3not-accessiblemandatory
dhcpClientEntry
OBJECT-TYPE
A single entry of the DHCP range client table. This contains information about a single DHCP range client address.
1.3.6.1.4.1.207.8.4.4.4.70.3.1not-accessiblemandatory
dhcpClientIpAddress
OBJECT-TYPE
An IP address from the range of available addresses.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.1IpAddressread-onlymandatory
dhcpClientID
OBJECT-TYPE
The hardware address of the client, if any, that has been assigned the IP address.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.2OCTET STRINGread-onlymandatory
dhcpClientState
OBJECT-TYPE
The state of the IP address; one of unused, inuse or reclaim.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.3INTEGER {unused(0), reclaiming(1), inuse(2), offered(3)}read-onlymandatory
dhcpClientType
OBJECT-TYPE
The type of allocation mechanism applied to the IP address; one of static, auto or dyn.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.4INTEGER {auto(1), dyn(2), static(3)}read-onlymandatory
dhcpClientExpiry
OBJECT-TYPE
The expiry date for dynamically allocated IP address.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.5OCTET STRINGread-onlymandatory
firewall
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.77
firewallTrapMessage
OBJECT-TYPE
The last message sent in a firewall TRAP. This variable is really just a placeholder for the object sent in the firewall TRAP, but can be read independently if required. Note however that a new TRAP will cause this variable to be overwritten.
1.3.6.1.4.1.207.8.4.4.4.77.1DisplayString (SIZE(0..255))read-onlymandatory
swi
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.87
swiPortTable
OBJECT-TYPE
Table of port properties.
1.3.6.1.4.1.207.8.4.4.4.87.1not-accessiblemandatory
swiPortEntry
OBJECT-TYPE
An entry in the port information table.
1.3.6.1.4.1.207.8.4.4.4.87.1.1not-accessiblemandatory
swiPortNumber
OBJECT-TYPE
This object identifies the port of the switch.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.1INTEGERread-onlymandatory
swiPortIngressLimit
OBJECT-TYPE
The Ingress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.20INTEGERread-writemandatory
swiPortEgressLimit
OBJECT-TYPE
The Egress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.21INTEGERread-writemandatory
swi56xxPortCounterTable
OBJECT-TYPE
Table of swi56xx port counter properties.
1.3.6.1.4.1.207.8.4.4.4.87.2not-accessiblemandatory
swi56xxPortCounterEntry
OBJECT-TYPE
An entry in the port information table.
1.3.6.1.4.1.207.8.4.4.4.87.2.1not-accessiblemandatory
swi56xxPortNumber
OBJECT-TYPE
This object identifies the port of the switch.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.1INTEGERread-onlymandatory
swi56xxRxTx64kPkts
OBJECT-TYPE
The number of 64kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.2Counterread-onlymandatory
swi56xxRxTx65To127kPkts
OBJECT-TYPE
The number of 65kB To 127kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.3Counterread-onlymandatory
swi56xxRxTx128To255kPkts
OBJECT-TYPE
The number of 128kB To 255kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.4Counterread-onlymandatory
swi56xxRxTx256To511kPkts
OBJECT-TYPE
The number of 256kB To 511kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.5Counterread-onlymandatory
swi56xxRxTx512To1023kPkts
OBJECT-TYPE
The number of 512kB To 1023kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.6Counterread-onlymandatory
swi56xxRxTx1024ToMaxPktSzPkts
OBJECT-TYPE
The number of 1024kB To MaxPktSz packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.7Counterread-onlymandatory
swi56xxRxTx519To1522kPkts
OBJECT-TYPE
The number of 519kB To 1522kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.8Counterread-onlymandatory
swi56xxPortRxOctets
OBJECT-TYPE
The number of octets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.9Counterread-onlymandatory
swi56xxPortRxPkts
OBJECT-TYPE
The number of packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.10Counterread-onlymandatory
swi56xxPortRxFCSErrors
OBJECT-TYPE
The number of frames received containing a Frame Check Sequence error.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.11Counterread-onlymandatory
swi56xxPortRxMulticastPkts
OBJECT-TYPE
The number of multicast packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.12Counterread-onlymandatory
swi56xxPortRxBroadcastPkts
OBJECT-TYPE
The number of broadcast packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.13Counterread-onlymandatory
swi56xxPortRxPauseMACCtlFrms
OBJECT-TYPE
The number of valid PAUSE MAC Control frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.14Counterread-onlymandatory
swi56xxPortRxOversizePkts
OBJECT-TYPE
The number of oversize packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.15Counterread-onlymandatory
swi56xxPortRxFragments
OBJECT-TYPE
The number of fragments received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.16Counterread-onlymandatory
swi56xxPortRxJabbers
OBJECT-TYPE
The number of jabber frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.17Counterread-onlymandatory
swi56xxPortRxMACControlFrms
OBJECT-TYPE
The number of MAC Control frames (Pause and Unsupported) received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.18Counterread-onlymandatory
swi56xxPortRxUnsupportOpcode
OBJECT-TYPE
The number of MAC Control frames with unsupported opcode (i.e. not Pause) received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.19Counterread-onlymandatory
swi56xxPortRxAlignmentErrors
OBJECT-TYPE
The number of frames with alignment errors received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.20Counterread-onlymandatory
swi56xxPortRxOutOfRngeLenFld
OBJECT-TYPE
The number of packets with length out of range received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.21Counterread-onlymandatory
swi56xxPortRxSymErDurCarrier
OBJECT-TYPE
The number of frames with invalid data symbols received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.22Counterread-onlymandatory
swi56xxPortRxCarrierSenseErr
OBJECT-TYPE
The number of false carrier conditions between frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.23Counterread-onlymandatory
swi56xxPortRxUndersizePkts
OBJECT-TYPE
The number of undersized packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.24Counterread-onlymandatory
swi56xxPortRxIpInHdrErrors
OBJECT-TYPE
swiPortRxIpInHdrErrors
1.3.6.1.4.1.207.8.4.4.4.87.2.1.25Counterread-onlymandatory
swi56xxPortTxOctets
OBJECT-TYPE
The number of octets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.26Counterread-onlymandatory
swi56xxPortTxPkts
OBJECT-TYPE
The number of packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.27Counterread-onlymandatory
swi56xxPortTxFCSErrors
OBJECT-TYPE
The number of frames containing a Frame Check Sequence error transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.28Counterread-onlymandatory
swi56xxPortTxMulticastPkts
OBJECT-TYPE
The number of multicast packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.29Counterread-onlymandatory
swi56xxPortTxBroadcastPkts
OBJECT-TYPE
The number of broadcast packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.30Counterread-onlymandatory
swi56xxPortTxPauseMACCtlFrms
OBJECT-TYPE
The number of valid PAUSE MAC Control frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.31Counterread-onlymandatory
swi56xxPortTxOversizePkts
OBJECT-TYPE
The number of oversize packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.32Counterread-onlymandatory
swi56xxPortTxFragments
OBJECT-TYPE
The number of fragments transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.33Counterread-onlymandatory
swi56xxPortTxJabbers
OBJECT-TYPE
The number of jabber frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.34Counterread-onlymandatory
swi56xxPortTxPauseCtrlFrms
OBJECT-TYPE
The number of Pause control frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.35Counterread-onlymandatory
swi56xxPortTxFrameWDeferrdTx
OBJECT-TYPE
The number of frames deferred once before successful transmission.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.36Counterread-onlymandatory
swi56xxPortTxFrmWExcesDefer
OBJECT-TYPE
The number of frame aborted after too many deferrals.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.37Counterread-onlymandatory
swi56xxPortTxSingleCollsnFrm
OBJECT-TYPE
The number of frames which experienced exactly one collision.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.38Counterread-onlymandatory
swi56xxPortTxMultCollsnFrm
OBJECT-TYPE
The number of frames which experienced 2 to 15 collisions (including late collisions).
1.3.6.1.4.1.207.8.4.4.4.87.2.1.39Counterread-onlymandatory
swi56xxPortTxLateCollsns
OBJECT-TYPE
The number of frames which experienced late collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.40Counterread-onlymandatory
swi56xxPortTxExcessivCollsns
OBJECT-TYPE
The number of frames aborted before transmission after 16 collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.41Counterread-onlymandatory
swi56xxPortTxCollisionFrames
OBJECT-TYPE
The total number of collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.42Counterread-onlymandatory
swi56xxPortMiscDropEvents
OBJECT-TYPE
The number of packets discarded at ingress port.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.43Counterread-onlymandatory
swi56xxPortMiscTaggedPktTx
OBJECT-TYPE
The number of VLAN tagged packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.44Counterread-onlymandatory
swi56xxPortMiscTotalPktTxAbort
OBJECT-TYPE
The number of Layer 2 and 3 packets aborted during transmission.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.45Counterread-onlymandatory
swi56xxPortHWMultiTTLexpired
OBJECT-TYPE
Number of multicast TTL expired frames.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.46Counterread-onlymandatory
swi56xxPortHWMultiBridgedFrames
OBJECT-TYPE
Number of multicast bridged frames
1.3.6.1.4.1.207.8.4.4.4.87.2.1.47Counterread-onlymandatory
swi56xxPortHWMultiRxDrops
OBJECT-TYPE
Number of multicast frames dropped at reception
1.3.6.1.4.1.207.8.4.4.4.87.2.1.48Counterread-onlymandatory
swi56xxPortHWMultiTxDrops
OBJECT-TYPE
NNumber of multicast frames dropped at transmission
1.3.6.1.4.1.207.8.4.4.4.87.2.1.49Counterread-onlymandatory
swiDebugVariables
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.87.3
swiDebugMemoryParityErrors
OBJECT-TYPE
For switches based on certain switch chips, the number of parity errors that have been detected in packet memory associated with the switch. If the device does not include the counting of memory parity errors, this variable will return 0.
1.3.6.1.4.1.207.8.4.4.4.87.3.1Counterread-onlymandatory
lb
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.104
lbShowGlobalTable
OBJECT-TYPE
General configuration and status of all of the virtual balancers configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1not-accessiblemandatory
lbShowGlobalEntry
OBJECT-TYPE
An entry in the global table.
1.3.6.1.4.1.207.8.4.4.4.104.1.1not-accessiblemandatory
lbGlobalIndex
OBJECT-TYPE
The index for the global table.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.1INTEGERread-onlymandatory
lbAffinityTimeOut
OBJECT-TYPE
The length of time in seconds that a resource can be associated to a source IP address or Cookie after the connection has been closed.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.2INTEGERread-onlymandatory
lbOrphanTimeOut
OBJECT-TYPE
The length of time in seconds that a connection can exist without having any data traversing it, before being declared an orphan and closed by the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.3INTEGERread-onlymandatory
lbCriticalRst
OBJECT-TYPE
The ratio of total messages received from a resource that can be TCP RST messages represented as a percentage.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.4INTEGERread-onlymandatory
lbTotalResources
OBJECT-TYPE
The total number of resources configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.5INTEGERread-onlymandatory
lbTotalResPools
OBJECT-TYPE
The total number of resource pools configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.6INTEGERread-onlymandatory
lbTotalVirtBals
OBJECT-TYPE
The total number of virtual balancers configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.7INTEGERread-onlymandatory
lbCurrentConnections
OBJECT-TYPE
Displays the current total number of connections to all resources in every resource pool on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.8INTEGERread-onlymandatory
lbShowResTable
OBJECT-TYPE
A list about the general information about for a given resource.
1.3.6.1.4.1.207.8.4.4.4.104.2not-accessiblemandatory
lbShowResEntry
OBJECT-TYPE
An entry in the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.2.1not-accessiblemandatory
lbResIndex
OBJECT-TYPE
The index for the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.1INTEGERread-onlymandatory
lbResource
OBJECT-TYPE
The name of the resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.2DisplayString (SIZE(0..255))read-onlymandatory
lbResIp
OBJECT-TYPE
The IP address that a virtual balancer uses to accesses the resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.3IpAddressread-onlymandatory
lbResPort
OBJECT-TYPE
The port that the service that the resource offer is accessed on.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.4INTEGERread-onlymandatory
lbResState
OBJECT-TYPE
The current state of the resource, either UP, DOWN, or CLOSING.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.5DisplayString (SIZE(0..255))read-onlymandatory
lbResWeight
OBJECT-TYPE
The weight that the virtual balancer will apply to the resource when selecting resources to try a connection to from a resource pool using either the WEIGHTEDLEASTCONNECT or WEIGHTEDLOTTERY selection algorithms.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.6INTEGERread-onlymandatory
lbResTotalConnections
OBJECT-TYPE
The total number of successful connections that have been made to this resource while it has been in the UP state.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.7INTEGERread-onlymandatory
lbResCurrentConnections
OBJECT-TYPE
The total number of connections currently made to the resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.8INTEGERread-onlymandatory
lbShowResPoolTable
OBJECT-TYPE
A list about the general information about for a given resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3not-accessiblemandatory
lbShowResPoolEntry
OBJECT-TYPE
An entry in the resource pool table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1not-accessiblemandatory
lbResPoolIndex
OBJECT-TYPE
The index for the resource pool table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.1INTEGERread-onlymandatory
lbResPoolResourceIndex
OBJECT-TYPE
The index for the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.2INTEGERread-onlymandatory
lbResPool
OBJECT-TYPE
The name of the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.3DisplayString (SIZE(0..255))read-onlymandatory
lbResPoolSelectionAlg
OBJECT-TYPE
The selection algorithm that ius employed by this resource pool when a resource has been selected for a connection. The options are ROUNDROBIN, WEIGHTEDLEASTCONNECT, WEIGHTEDLOTTERY and FASTESTRESPONSE.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.4DisplayString (SIZE(0..255))read-onlymandatory
lbResPoolFailOnLast
OBJECT-TYPE
Indicates whether or not the resource pool will fail a resource if it is the last resource in the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.5DisplayString (SIZE(0..255))read-onlymandatory
lbResPoolTotalConnections
OBJECT-TYPE
The total number of successful connections that have been made to the resources in the resource pool over the lifetime of the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.6DisplayString (SIZE(0..255))read-onlymandatory
lbResPoolResources
OBJECT-TYPE
The name of the resource that is currently allocated to the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.7DisplayString (SIZE(0..255))read-onlymandatory
lbShowVirtBalTable
OBJECT-TYPE
A list about the general information about for a given virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4not-accessiblemandatory
lbShowVirtBalEntry
OBJECT-TYPE
An entry in the virtual balancer table.
1.3.6.1.4.1.207.8.4.4.4.104.4.1not-accessiblemandatory
lbVirtBalIndex
OBJECT-TYPE
The index for the virtual balancer table.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.1INTEGERread-onlymandatory
lbVirtBal
OBJECT-TYPE
The name of the virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.2DisplayString (SIZE(0..255))read-onlymandatory
lbVirtBalPublicIp
OBJECT-TYPE
The IP address on which the virtual balancer will receive requests for the service provided by the resource pool associated with it.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.3IpAddressread-onlymandatory
lbVirtBalPublicPort
OBJECT-TYPE
The port on which the virtual balancer will receive requests for the service provided by the resource pool associated with it.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.4INTEGERread-onlymandatory
lbVirtBalState
OBJECT-TYPE
The current state of the virtual balancer, can either be UP, CLOSING, or DOWN.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.5DisplayString (SIZE(0..255))read-onlymandatory
lbVirtBalResPool
OBJECT-TYPE
The name of the resource pool that is associated with the virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.6DisplayString (SIZE(0..255))read-onlymandatory
lbVirtBalType
OBJECT-TYPE
The type of load balancer that this virtual balancer currently is, can be either TCP, HTTP, or ROUTE.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.7DisplayString (SIZE(0..255))read-onlymandatory
lbVirtBalTotalConnections
OBJECT-TYPE
The total number of stateful connections currently running through this virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.8INTEGERread-onlymandatory
lbVirtBalAffinity
OBJECT-TYPE
Indicates whether or not entries will be made in a virtual balancers' affinity table for each stateful connection to a resource in its' resource pool (TCP and ROUTE type) or for cookies received from clients (HTTP type).
1.3.6.1.4.1.207.8.4.4.4.104.4.1.9DisplayString (SIZE(0..255))read-onlymandatory
lbVirtBalHttpErrorCode
OBJECT-TYPE
A list of the HTTP server error status code added.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.10DisplayString (SIZE(0..255))read-onlymandatory
lbShowAffTable
OBJECT-TYPE
A list of affinity tables for all configured virtual balancers on the router.
1.3.6.1.4.1.207.8.4.4.4.104.5not-accessiblemandatory
lbShowAffEntry
OBJECT-TYPE
An entry in the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.5.1not-accessiblemandatory
lbAffIndex
OBJECT-TYPE
The index for the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.1INTEGERread-onlymandatory
lbAffVirtBal
OBJECT-TYPE
The name of the virtual balancer whose affinity table is being displayed.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.2DisplayString (SIZE(0..255))read-onlymandatory
lbAffClientIp
OBJECT-TYPE
The IP address that has affinity to the given resource.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.3IpAddressread-onlymandatory
lbAffCookie
OBJECT-TYPE
The cookie that has affinity to the given resource.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.4DisplayString (SIZE(0..255))read-onlymandatory
lbAffResource
OBJECT-TYPE
The name of the resource that the Client IP/Cookie has an affinity for.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.5DisplayString (SIZE(0..255))read-onlymandatory
lbAffExpiry
OBJECT-TYPE
The amount of seconds left before this entry expires, and is removed from the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.6INTEGERread-onlymandatory
lbShowConTable
OBJECT-TYPE
A list about all of the TCP connections currently open to a given virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.6not-accessiblemandatory
lbShowConEntry
OBJECT-TYPE
An entry in the connections table.
1.3.6.1.4.1.207.8.4.4.4.104.6.1not-accessiblemandatory
lbConIndex
OBJECT-TYPE
The index for the connections table.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.1INTEGERread-onlymandatory
lbConVirtBal
OBJECT-TYPE
The name of the virtual balancer the listed connections are to.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.2DisplayString (SIZE(0..255))read-onlymandatory
lbConClientIp
OBJECT-TYPE
The IP address of that originated the connection.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.3IpAddressread-onlymandatory
lbConPort
OBJECT-TYPE
The port on the originating system that represents the other end of the connection.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.4INTEGERread-onlymandatory
lbConResource
OBJECT-TYPE
The name of the resource that the connection has been made to.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.5DisplayString (SIZE(0..255))read-onlymandatory
ds3module
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.4.109
ds3TrapTable
OBJECT-TYPE
The ATR enterprise DS3 trap table.
1.3.6.1.4.1.207.8.4.4.4.109.1not-accessiblemandatory
ds3TrapEntry
OBJECT-TYPE
An entry in the ATR enterprise DS3 trap table.
1.3.6.1.4.1.207.8.4.4.4.109.1.1not-accessiblemandatory
ds3TcaTrapEnable
OBJECT-TYPE
Indicates whether the threshold crossing alert traps should be generated for this interface.
1.3.6.1.4.1.207.8.4.4.4.109.1.1.1INTEGER {enabled(1), disabled(2)}read-writemandatory
ds3TrapError
OBJECT-TYPE
This variable shows which kind of parameter or primitive caused the trap. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoError shows no trap has occured
1.3.6.1.4.1.207.8.4.4.4.109.1.1.2INTEGER {ds3NoError(1), ds3PES(2), ds3PSES(3), ds3SEFs(4), ds3UAS(5), ds3LCVs(6), ds3PCVs(7), ds3LESs(8), ds3CCVs(9), ds3CESs(10), ds3CSESs(11)}read-onlymandatory
ds3TrapLoc
OBJECT-TYPE
This variable shows whether the trap was caused by a problem at the local or remote end. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoLoc shows no trap had occured.
1.3.6.1.4.1.207.8.4.4.4.109.1.1.3INTEGER {ds3NoLoc(1), ds3Near(2), ds3Far(3)}read-onlymandatory
ds3TrapInterval
OBJECT-TYPE
This variable shows whether the counter which has crossed the threshold is a twenty four hour or fifteen minute counter. This variable is really just a placeholder for the object sent in the DS3 TRAP, but can be read independently if required. The variable will hold the value at the latest trap. A value of ds3NoInt shows no trap has occured.
1.3.6.1.4.1.207.8.4.4.4.109.1.1.4INTEGER {ds3NoInt(1), ds3Fifteen(2), ds3Twentyfour(3)}read-onlymandatory
arInterfaces
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.5
arBoardMaxIndex
OBJECT-TYPE
The maximum index of boards in the board table. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.1INTEGERread-onlymandatory
arBoardTable
OBJECT-TYPE
The table of boards in the AR router.
1.3.6.1.4.1.207.8.4.4.5.2not-accessiblemandatory
arBoardEntry
OBJECT-TYPE
A single entry in the board table. Each entry consists of information about one board in the router.
1.3.6.1.4.1.207.8.4.4.5.2.1not-accessiblemandatory
arBoardIndex
OBJECT-TYPE
The index of the board in the board table. Index 1 is reserved for the main system board of the router. Other boards will take index numbers as they are initialised at router startup, or for routers with hot-swap capability, as boards are added to and removed from the router.
1.3.6.1.4.1.207.8.4.4.5.2.1.1INTEGERread-onlymandatory
arBoardId
OBJECT-TYPE
The type of board in this board entry. The values of this object are taken from the pprXxx object IDs under the boards sub-tree.
1.3.6.1.4.1.207.8.4.4.5.2.1.2OBJECT IDENTIFIERread-onlymandatory
arBoardName
OBJECT-TYPE
The name of the board in this board entry. This is a readable string which identifies the board to the manager.
1.3.6.1.4.1.207.8.4.4.5.2.1.3DisplayString (SIZE(0..255))read-onlymandatory
arBoardRevision
OBJECT-TYPE
The manufacturing revision of the board in this board entry. This string has the format Xm-n, where X is P for prototype, or M for manufacturing, m is the major revision number for this board, and n is the field upgrade revision number for this board.
1.3.6.1.4.1.207.8.4.4.5.2.1.4DisplayString (SIZE(0..255))read-onlymandatory
arBoardSerialNumber
OBJECT-TYPE
The serial number of the board in this board entry. Serial numbers are strings of decimal numbers up to 10 digits in length. Each and every serial number is globally unique. It is possible for the serial number of a board to be invalid. In this case the value returned for this object will be '*** Invalid ***'
1.3.6.1.4.1.207.8.4.4.5.2.1.5DisplayString (SIZE(0..255))read-onlymandatory
arBoardTotalSlots
OBJECT-TYPE
The number of slots on this board. Each slot from 1 to the value of this object may be empty or occupied by another board. By searching the arSlotTable with this board's board index and all values of slot index from 1 to the value of this object, a tree of the boards in this router can be built. The value 0 for this object means that it has no slots.
1.3.6.1.4.1.207.8.4.4.5.2.1.6INTEGERread-onlymandatory
arBoardTotalPositions
OBJECT-TYPE
The number of positions on this board. Each position from 1 to the value of this object contains a single router interface. Note that positions are different from slots. An position contains an actual interface while a slot contains a different board which itself may contain interfaces in its positions.
1.3.6.1.4.1.207.8.4.4.5.2.1.7INTEGERread-onlymandatory
arSlotTable
OBJECT-TYPE
The table of slots in the router, indexed by board index and slot index.
1.3.6.1.4.1.207.8.4.4.5.3not-accessiblemandatory
arSlotEntry
OBJECT-TYPE
A single entry in the board slot table.
1.3.6.1.4.1.207.8.4.4.5.3.1not-accessiblemandatory
arSlotBoardIndex
OBJECT-TYPE
The index of the board for this slot entry. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.3.1.1INTEGERread-onlymandatory
arSlotSlotIndex
OBJECT-TYPE
The index of the slot for this slot entry. Indices start from 1 and are specific to each different board type. There are no gaps in the sequence of slot indices. The maximum value for slot index is given by the value of arBoardTotalSlots for this board.
1.3.6.1.4.1.207.8.4.4.5.3.1.2INTEGERread-onlymandatory
arSlotHeldBoardIndex
OBJECT-TYPE
The index of the board held in the slot for this slot entry. This is an index into the arBoardTable. A value of 0 for this object means that the slot is not populated.
1.3.6.1.4.1.207.8.4.4.5.3.1.3INTEGERread-onlymandatory
arSlotDescription
OBJECT-TYPE
A description for this slot entry. This is a textual description which gives the manager a clue as to what the slot for this entry is. For example, the slots on an AR 720 have descriptions 'Bay0', 'Bay1' and 'MAC'.
1.3.6.1.4.1.207.8.4.4.5.3.1.4DisplayString (SIZE(0..255))read-onlymandatory
arInterfaceTable
OBJECT-TYPE
The table of physical interfaces in the AR router.
1.3.6.1.4.1.207.8.4.4.5.4not-accessiblemandatory
arInterfaceEntry
OBJECT-TYPE
A single entry in the interface table. Each entry consists of information about one interface in the router, and is indexed by the board index and the position of the interface on the board.
1.3.6.1.4.1.207.8.4.4.5.4.1not-accessiblemandatory
arInterfaceBoardIndex
OBJECT-TYPE
The index of the board in the board table which contains this interface. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.4.1.1INTEGERread-onlymandatory
arInterfacePosition
OBJECT-TYPE
The position of the interface on the board. Each board type will have well-known positions which are the interfaces provided by the board. The number of positions on a given board is given by the object arBoardTotalPositions for this board.
1.3.6.1.4.1.207.8.4.4.5.4.1.2INTEGERread-onlymandatory
arInterfaceIfIndex
OBJECT-TYPE
The ifIndex for the interface represented by this entry of the interfaces table. This is the ifIndex of the ifEntry used to represent the physical interface. The value 0 is used for interfaces which don't have an ifIndex.
1.3.6.1.4.1.207.8.4.4.5.4.1.3InterfaceIndexOrZeroread-onlymandatory
arInterfaceName
OBJECT-TYPE
The name of this interface. This is the name that the manager can use to refer to this interface in entering router commands.
1.3.6.1.4.1.207.8.4.4.5.4.1.4DisplayString (SIZE(0..255))read-onlymandatory
arInterfaceFullName
OBJECT-TYPE
The fully qualified name for this interface. This identifies the path that must be followed to reach the interface. This name can be used in router commands. In routers don't support fully qualified names, this is the same as arInterfaceName.
1.3.6.1.4.1.207.8.4.4.5.4.1.5DisplayString (SIZE(0..255))read-onlymandatory
arIfXTable
OBJECT-TYPE
The table of interface statistics for the AR router. This table extends the ifTable.
1.3.6.1.4.1.207.8.4.4.5.5not-accessiblemandatory
arIfXEntry
OBJECT-TYPE
A single entry in the interface extension table. Each entry consists of extra interface information not covered in standard MIBs. The index for this table is ifIndex, the same as for ifTable.
1.3.6.1.4.1.207.8.4.4.5.5.1not-accessiblemandatory
arIfXIndex
OBJECT-TYPE
The index of the ifTable.
1.3.6.1.4.1.207.8.4.4.5.5.1.1INTEGERread-onlymandatory
arIfXAverageInputBitsSecond
OBJECT-TYPE
The average number of bits received per second on all interfaces over the past 8.5 minutes. The average is calculated by an 8.5 minute (512s) decaying average, which is updated every 4 seconds using the following formula: X' = 127/128X + 1/128i where X' is the new average X is the old average i is the most recent poll result The times and multiplier factors have been chosen to give the simplest possible calculation using bit shifting operations.
1.3.6.1.4.1.207.8.4.4.5.5.1.2INTEGERread-onlymandatory
arIfXAverageInputPacketsSecond
OBJECT-TYPE
The average number of packets received per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details of the way in which the average is calculated.
1.3.6.1.4.1.207.8.4.4.5.5.1.3INTEGERread-onlymandatory
arIfXAverageOutputBitsSecond
OBJECT-TYPE
The average number of bits sent per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details of the way in which the average is calculated.
1.3.6.1.4.1.207.8.4.4.5.5.1.4INTEGERread-onlymandatory
arIfXAverageOutputPacketsSecond
OBJECT-TYPE
The average number of bits sent per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details of the way in which the average is calculated.
1.3.6.1.4.1.207.8.4.4.5.5.1.5INTEGERread-onlymandatory
protocols
OBJECT-IDENTITY
1.3.6.1.4.1.207.8.4.4.6

Notifications

NameOIDStatus
fanAndPsRpsConnectionTrap
NOTIFICATION-TYPE
Generated when the RPS connection status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.1
fanAndPsMainPSUStatusTrap
NOTIFICATION-TYPE
Generated when the main power supply status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.2
fanAndPsRedundantPSUStatusTrap
NOTIFICATION-TYPE
Generated when the RPS status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.3
fanAndPsMainFanStatusTrap
NOTIFICATION-TYPE
Generated when the main fan changes status.
1.3.6.1.4.1.207.8.4.4.3.1.0.4
fanAndPsRedundantFanStatusTrap
NOTIFICATION-TYPE
Generated when the redundant fan changes status.
1.3.6.1.4.1.207.8.4.4.3.1.0.5
fanAndPsTemperatureStatusTrap
NOTIFICATION-TYPE
Generated when the temperature changes status.
1.3.6.1.4.1.207.8.4.4.3.1.0.6
fanAndPsFanTrayPresentTrap
NOTIFICATION-TYPE
Generated when the fan tray presence status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.7
fanAndPsFanTrayStatusTrap
NOTIFICATION-TYPE
Generated when the fan tray status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.8
fanAndPsMainMonitoringStatusTrap
NOTIFICATION-TYPE
Generated when the main power supply monitoring status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.9
fanAndPsAccelFanStatusTrap
NOTIFICATION-TYPE
Generated when the accelerator fans' status changes.
1.3.6.1.4.1.207.8.4.4.3.1.0.10
generalTemperatureStatusTrap
NOTIFICATION-TYPE
Generated when the temperature status of the device changes.
1.3.6.1.4.1.207.8.4.4.3.4.1.0.1
sbTempFixedThresholdTrap
NOTIFICATION-TYPE
Trap occurs when fixed threshold status changes. The actual temperature and the fixed threshold are also given.
1.3.6.1.4.1.207.8.4.4.3.4.2.0.1
sbTempSettableThresholdTrap
NOTIFICATION-TYPE
Trap occurs when settable threshold status changes. The actual temperature and the settable threshold are also given.
1.3.6.1.4.1.207.8.4.4.3.4.2.0.2
acceleratorTemperatureStatusTrap
NOTIFICATION-TYPE
Generated when the temperature status of the device changes.
1.3.6.1.4.1.207.8.4.4.3.4.3.0.1
bbrNvsReinitialiseTrap
NOTIFICATION-TYPE
Generated at boot when the device detects that the BBR has been corrupted and reinitialised. This can happen if the device's BBR battery has run down, and the device has been powered off, then on.
1.3.6.1.4.1.207.8.4.4.3.6.0.1
flashFailureTrap
NOTIFICATION-TYPE
A flash failure trap is generated when any of the above flash counter is incremented and the failure type is sent in the trap.
1.3.6.1.4.1.207.8.4.4.4.31.0.1
configFileExistTrap
NOTIFICATION-TYPE
This trap is generated when the boot file is detected as missing
1.3.6.1.4.1.207.8.4.4.4.49.0.1
triggerTrap
NOTIFICATION-TYPE
A trigger trap is generated a trigger is activated. The number of the trigger activated is given by the variable triggerLastTriggerActivated.
1.3.6.1.4.1.207.8.4.4.4.53.0.1
pingTrap
NOTIFICATION-TYPE
A ping trap is generated when a ping has completed. Traps are only generated if the variable pingTrapOnCompletion is set to true(1) in the dynamic ping entry. A trap is still generated if the ping is stopped prematurely by setting the variable pingStatus to stop/stopped(2).
1.3.6.1.4.1.207.8.4.4.4.58.0.1
dhcpRangeExhaustedTrap
NOTIFICATION-TYPE
This trap is generated when a DHCP client makes a request for an IP address and the request cannot be satisfied because all addresses in the range are already allocated to other devices.
1.3.6.1.4.1.207.8.4.4.4.70.0.1
firewallTrap
NOTIFICATION-TYPE
A firewall trap is generated when the firewall detects an intrusion or attack and notifies the router manager. Firewall trap notifications are enabled with the command ENABLE FIREWALL NOTIFY=SNMP.
1.3.6.1.4.1.207.8.4.4.4.77.0.1
swiIntrusionDetectionTrap
NOTIFICATION-TYPE
An intrusion detection trap is generated when a port has intrusion detection enabled, and the action taken when intrusion is detected is to generate a trap. Intrusion is detected when the number of MAC addresses learned on the port exceeds the configured learn limit. The ifIndex of the port is included in the trap.
1.3.6.1.4.1.207.8.4.4.4.87.0.6
tcaTrap
NOTIFICATION-TYPE
A DS3 trap is generated when a threshold crossing alert occurs. This happens when an error count exceeds a pre determined value. The values are counted over 15 minute and 24 hour periods. Once a trap has occured in a given period it may not occur again within the same period.
1.3.6.1.4.1.207.8.4.4.4.109.0.1