ALCATEL-IND1-VRRP-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.28.1
- Last updated
- 2019-11-27 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2019-11-27 00:00, 2007-04-03 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-VRRP-MIB- Digest
sha256:0013e84282402d5028b112f9c530697f0135b06fd978d73ca2bcebe7f0fc1e3d
Description
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary VRRP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | softentIND1Vrrp |
| ALCATEL-IND1-VRRP3-MIB | alaVrrp3OperEntry, alaVrrp3OperIpVersion, alaVrrp3OperVrId |
| IF-MIB | InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
| VRRP-MIB | vrrpOperEntry, vrrpOperVrId |
| VRRPV3-MIB | vrrpv3OperationsEntry, vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-VRRP-MIB ALCATEL-IND1-VRRP3-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC VRRP-MIB VRRPV3-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlaVrGroupId TEXTUAL-CONVENTION A number that serves to uniquely identify a virtual router group. | current | |||
| AlaVrTrackId TEXTUAL-CONVENTION A number that serves to uniquely identify a tracking policy. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alcatelIND1VRRPMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1 | |||
| alaVRRPConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1 | |||
| alaVRRPStartDelay OBJECT-TYPE Once VRRP's initial configuration is complete at startup, this object specifies the number of seconds VRRP will delay before leaving the initialize state. This delay is to allow external protocols (spanning tree, OSPF, etc.) time to converge so that when a VRRP virtual router becomes master it will be able to forward traffic. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.1 | Integer32 (0..180) | read-write | current |
| alaVrrpBfdStatus OBJECT-TYPE Enable or disable the BFD for VRRP. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| alaVrrpTracking OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2 | |||
| alaVrrpTrackTable OBJECT-TYPE VRRP Tracking Policy table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpTrackEntry' items. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1 | not-accessible | current | |
| alaVrrpTrackEntry OBJECT-TYPE An entry in the vrrpTrackTable containing the operational characteristics of a VRRP tracking policy. Rows in the table cannot be modified unless the value of 'vrrpTrackAdminState' is 'disabled'. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1 | not-accessible | current | |
| alaVrrpTrackId OBJECT-TYPE This object contains the Tracking Policy Identifier (TRACKID). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.1 | AlaVrTrackId | not-accessible | current |
| alaVrrpTrackState OBJECT-TYPE The conditional state of the tracking policy entity. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.2 | INTEGER {up(1), down(2)} | read-only | current |
| alaVrrpTrackAdminState OBJECT-TYPE This object will enable/disable the tracking policy function. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.3 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaVrrpTrackEntityType OBJECT-TYPE This object specifies the tracking policy entity type currently in use. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.4 | INTEGER {port(2), ipaddress(3), interface(4), ipv6Interface(5)} | read-only | current |
| alaVrrpTrackEntityPort OBJECT-TYPE This object contains the Tracking Policy Entity. A port ifIndex or 0 if not significant. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.6 | InterfaceIndexOrZero | read-create | current |
| alaVrrpTrackPriority OBJECT-TYPE This object specifies the value by which the priority of virtual routers associated with the tracking policy will be decremented when the tracked entity's operational state transitions from up to down, or will be incremented when the tracked entity's operational state transitions from down to up. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.8 | Integer32 (0..255) | read-create | current |
| alaVrrpTrackRowStatus OBJECT-TYPE The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instances of `vrrpTrackId', and either one of : alaVrrpTrackEntityPort, or alaVrrpTrackEntityInterface have been set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.9 | RowStatus | read-create | current |
| alaVrrpTrackEntityInterface OBJECT-TYPE This object contains the Tracking Policy Entity. An interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.10 | InterfaceIndexOrZero | read-create | current |
| alaVrrpTrackEntityIpv6Interface OBJECT-TYPE This object contains the Tracking Policy Entity. An Ipv6 interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.11 | InterfaceIndexOrZero | read-create | current |
| alaVrrpTrackEntityIpAddrType OBJECT-TYPE This object contains the Tracking Policy Entity IP Address type. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.12 | InetAddressType | read-create | current |
| alaVrrpTrackEntityIpAddr OBJECT-TYPE This object contains the Tracking Policy Entity. An IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.13 | InetAddress | read-create | current |
| alaVrrpTrackBfdStatus OBJECT-TYPE Enables BFD for a VRRP track. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.14 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaVrrpTrackDelay OBJECT-TYPE This object specifies a delay value, in seconds, applied when an address tracking policy's operational state transitions to up. The effect is to delay incrementing the priority of the virtual routers associated with the tracking policy. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.15 | Integer32 (0..60) | read-create | current |
| alaVrrpAssoTrackTable OBJECT-TYPE The table of tracking policies associated with this virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2 | not-accessible | current | |
| alaVrrpAssoTrackEntry OBJECT-TYPE An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrpTrackCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1 | not-accessible | current | |
| alaVrrpAssoTrackId OBJECT-TYPE The identifier of the tracking policy the virtual router is responsible for monitoring. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.1 | AlaVrTrackId | not-accessible | current |
| alaVrrpAssoTrackRowStatus OBJECT-TYPE The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.2 | RowStatus | read-create | current |
| alaVrrp3AssoTrackTable OBJECT-TYPE The table of tracking policies associated with this virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3 | not-accessible | current | |
| alaVrrp3AssoTrackEntry OBJECT-TYPE An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1 | not-accessible | current | |
| alaVrrp3AssoTrackId OBJECT-TYPE The identifier of the tracking policy the virtual router is responsible for monitoring. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.1 | AlaVrTrackId | not-accessible | current |
| alaVrrp3AssoTrackRowStatus OBJECT-TYPE The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.2 | RowStatus | read-create | current |
| alaVrrpv3AssoTrackTable OBJECT-TYPE The table of tracking policies associated with this virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4 | not-accessible | current | |
| alaVrrpv3AssoTrackEntry OBJECT-TYPE An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1 | not-accessible | current | |
| alaVrrpv3AssoTrackId OBJECT-TYPE The identifier of the tracking policy the virtual router is responsible for monitoring. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.1 | AlaVrTrackId | not-accessible | current |
| alaVrrpv3AssoTrackRowStatus OBJECT-TYPE The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.2 | RowStatus | read-create | current |
| alaVrrpOperations OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3 | |||
| alaVrrpOperTable OBJECT-TYPE Table of virtual router configuration info. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1 | not-accessible | current | |
| alaVrrpOperEntry OBJECT-TYPE An entry in the table, config information about a given virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1 | not-accessible | current | |
| alaVrrpCurrentPriority OBJECT-TYPE This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.1 | Integer32 (0..255) | read-only | current |
| alaVrrpTrackCount OBJECT-TYPE The number of tracking policies associated with a virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.2 | Integer32 | read-only | current |
| alaVrrpGroupIdent OBJECT-TYPE The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.3 | Integer32 (0..255) | read-only | current |
| alaVrrp3OperExTable OBJECT-TYPE Table of virtual router configuration info. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2 | not-accessible | current | |
| alaVrrp3OperExEntry OBJECT-TYPE An entry in the table, config information about a given virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1 | not-accessible | current | |
| alaVrrp3CurrentPriority OBJECT-TYPE This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.1 | Integer32 (0..255) | read-only | current |
| alaVrrp3TrackCount OBJECT-TYPE The number of tracking policies associated with a virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.2 | Integer32 | read-only | current |
| alaVrrp3GroupIdent OBJECT-TYPE The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.3 | Integer32 (0..255) | read-only | current |
| alaVrrpv3OperationsExTable OBJECT-TYPE Table of virtual router configuration info. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3 | not-accessible | current | |
| alaVrrpv3OperationsExEntry OBJECT-TYPE An entry in the table, config information about a given virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1 | not-accessible | current | |
| alaVrrpv3CurrentPriority OBJECT-TYPE This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.1 | Integer32 (0..255) | read-only | current |
| alaVrrpv3TrackCount OBJECT-TYPE The number of tracking policies associated with a virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.2 | Integer32 | read-only | current |
| alaVrrpv3GroupIdent OBJECT-TYPE The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.3 | Integer32 (0..255) | read-only | current |
| alaVrrpv3OperVersion OBJECT-TYPE The VRRP version for this IPv4 virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.4 | INTEGER {vrrpv2(1), vrrpv3(2)} | read-write | current |
| alaVrrpv3OperInterval OBJECT-TYPE The VRRP version 3 IPv4 Interface time interval, in centiseconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.5 | TimeInterval (1..25500) | read-write | current |
| alaVRRPv2Config OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4 | |||
| alaVRRPDefaultInterval OBJECT-TYPE The VRRP Router default time interval, in seconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.1 | Integer32 (1..255) | read-write | current |
| alaVRRPDefaultPriority OBJECT-TYPE This object specifies the VRRP Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.2 | Integer32 (1..254) | read-write | current |
| alaVRRPDefaultPreemptMode OBJECT-TYPE The VRRP Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.3 | TruthValue | read-write | current |
| alaVRRPAdminState OBJECT-TYPE This object is used to force a change in to the vrrpOperAdminState of virtual routers in the vrrpOperTable. Setting a value of allEnable will cause the vrrpOperAdminState of each entry in the table to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.4 | INTEGER {allEnable(1), enable(2), disable(3)} | read-write | current |
| alaVRRPSetParam OBJECT-TYPE This object is used to force the virtual routers in the vrrpOperTable to revert to the default parameter values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. Unless alaVRRPOverride is set to true only virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.5 | INTEGER {none(1), all(2), interval(3), priority(4), preempt(5)} | read-write | current |
| alaVRRPOverride OBJECT-TYPE This object is used in combination with the alaVRRPSetParam object to force all virtual routers in the vrrpOperTable to revert to the default values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.6 | TruthValue | read-write | current |
| alaVrrpGroup OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5 | |||
| alaVrrpGroupTable OBJECT-TYPE VRRP Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpGroupEntry' items. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1 | not-accessible | current | |
| alaVrrpGroupEntry OBJECT-TYPE An entry in the vrrpGroupTable containing the characteristics of a VRRP group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1 | not-accessible | current | |
| alaVrrpGroupId OBJECT-TYPE This object contains the Tracking Policy Identifier (GROUPID). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.1 | AlaVrGroupId | not-accessible | current |
| alaVrrpGroupInterval OBJECT-TYPE The VRRP Group time interval, in seconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.2 | Integer32 (1..255) | read-create | current |
| alaVrrpGroupPriority OBJECT-TYPE This object specifies the VRRP Group priority to be used for the virtual router master election process. Higher values imply higher priority. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.3 | Integer32 (1..254) | read-create | current |
| alaVrrpGroupPreemptMode OBJECT-TYPE The VRRP Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.4 | TruthValue | read-create | current |
| alaVrrpGroupAdminState OBJECT-TYPE This object is used to force a change in to the vrrpOperAdminState of virtual routers in the corresponding alaVRRPAssoGroupTable entry. Setting a value of allEnable will cause the vrrpOperAdminState of each vrrpOperEntry to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers in the group whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpGroupAdminState or alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.5 | INTEGER {allEnable(1), enable(2), disable(3)} | read-create | current |
| alaVrrpGroupSetParam OBJECT-TYPE This object is used to force the virtual routers in the corresponding alaVRRPAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. Unless alaVrrpGroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.6 | INTEGER {none(1), all(2), interval(3), priority(4), preempt(5)} | read-create | current |
| alaVrrpGroupOverride OBJECT-TYPE This object is used in combination with the alaVrrpGroupSetParam object to force all virtual routers in the corresponding alaVrrpAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.7 | TruthValue | read-create | current |
| alaVrrpGroupRowStatus OBJECT-TYPE The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpGroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpGroupId' has been set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.8 | RowStatus | read-create | current |
| alaVrrpAssoGroupTable OBJECT-TYPE The table of virtual routers associated with this group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2 | not-accessible | current | |
| alaVrrpAssoGroupEntry OBJECT-TYPE An entry in the table contains a virtual router id that is associated with a virtual router group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1 | not-accessible | current | |
| alaVrrpAssoGroupRowStatus OBJECT-TYPE The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1.1 | RowStatus | read-create | current |
| alaVrrpv3GroupTable OBJECT-TYPE VRRP version 3 Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'alaVrrpv3GroupEntry' items. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3 | not-accessible | current | |
| alaVrrpv3GroupEntry OBJECT-TYPE An entry in the vrrpv3GroupTable containing the characteristics of a VRRP version 3 group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1 | not-accessible | current | |
| alaVrrpv3GroupId OBJECT-TYPE This object contains the VRRP version 3 Group Identifier (GROUPID). | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.1 | AlaVrGroupId | not-accessible | current |
| alaVrrpv3GroupInterval OBJECT-TYPE The VRRP version 3 Group time interval, in seconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.2 | TimeInterval (1..25500) | read-create | current |
| alaVrrpv3GroupPriority OBJECT-TYPE This object specifies the VRRP version 3 Group priority to be used for the virtual router master election process. Higher values imply higher priority. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.3 | Integer32 (1..254) | read-create | current |
| alaVrrpv3GroupPreemptMode OBJECT-TYPE The VRRP version 3 Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.4 | TruthValue | read-create | current |
| alaVrrpv3GroupAcceptMode OBJECT-TYPE The VRRP version 3 Group accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.5 | TruthValue | read-create | current |
| alaVrrpv3GroupVersion OBJECT-TYPE The IPv4 VRRP group version. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.6 | INTEGER {vrrpv2(1), vrrpv3(2)} | read-create | current |
| alaVrrpv3GroupAdminState OBJECT-TYPE This object is used to force a change in to the vrrpv3OperationsRowStatus of virtual routers in the corresponding alaVRRPv3AssoGroupTable entry. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each vrrpv3OperationsEntry to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of virtual routers in the group whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpv3GroupAdminState or alaVRRPv3AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.7 | INTEGER {allEnable(1), enable(2), disable(3)} | read-create | current |
| alaVrrpv3GroupSetParam OBJECT-TYPE This object is used to force the virtual routers in the corresponding alaVRRPv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInterval, alaVrrpv3GroupPriority, alaVrrpv3GroupPreemptMode, alaVrrpv3GroupAcceptMode and alaVrrpv3GroupVersion. Unless alaVrrpv3GroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, accept, and version values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.8 | INTEGER {none(1), all(2), interval(3), priority(4), preempt(5), accept(6), version(7)} | read-create | current |
| alaVrrpv3GroupOverride OBJECT-TYPE This object is used in combination with the alaVrrpv3GroupSetParam object to force all virtual routers in the corresponding alaVrrpv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInterval, alaVrrpv3GroupPriority, alaVrrpv3GroupPreemptMode, alaVrrpv3GroupAcceptMode and alaVrrpv3GroupVersion. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.9 | TruthValue | read-create | current |
| alaVrrpv3GroupRowStatus OBJECT-TYPE The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpv3GroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpv3GroupId' has been set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.10 | RowStatus | read-create | current |
| alaVrrpv3AssoGroupTable OBJECT-TYPE The table of VRRP version 3 virtual routers associated with this group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4 | not-accessible | current | |
| alaVrrpv3AssoGroupEntry OBJECT-TYPE An entry in the table contains a virtual router id that is associated with a VRRP version 3 virtual router group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1 | not-accessible | current | |
| alaVrrpv3AssoGroupRowStatus OBJECT-TYPE The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1.1 | RowStatus | read-create | current |
| alaVRRPv3IPv4Config OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6 | |||
| alaVRRPv3IPv4DefaultInterval OBJECT-TYPE The VRRP version 3 IPv4 Router default time interval, in seconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.1 | TimeInterval (1..25500) | read-write | current |
| alaVRRPv3IPv4DefaultPriority OBJECT-TYPE The VRRP version 3 IPv4 Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.2 | Integer32 (1..254) | read-write | current |
| alaVRRPv3IPv4DefaultPreemptMode OBJECT-TYPE The VRRP version 3 IPv4 Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.3 | TruthValue | read-write | current |
| alaVRRPv3IPv4DefaultAcceptMode OBJECT-TYPE The VRRP version 3 IPv4 Router default accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.4 | TruthValue | read-write | current |
| alaVRRPv3IPv4DefaultVersion OBJECT-TYPE This object contains the default VRRP version for all IPv4 virtual routers. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.5 | INTEGER {vrrpv2(1), vrrpv3(2)} | read-write | current |
| alaVRRPv3IPv4AdminState OBJECT-TYPE This object is used to force a change in to the vrrpv3OperationsRowStatus of IPv4 virtual routers in the vrrpv3OperationsTable. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each IPv4 entry in the table to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of IPv4 virtual routers whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPv3IPv4AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each IPv4 entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.6 | INTEGER {allEnable(1), enable(2), disable(3)} | read-write | current |
| alaVRRPv3IPv4SetParam OBJECT-TYPE This object is used to force the IPv4 virtual routers in the vrrpv3OperationsTable to revert to the default parameter values specified in alaVRRPv3IPv4DefaultInterval, alaVRRPv3IPv4DefaultPriority, alaVRRPv3IPv4DefaultPreemptMode, alaVRRPv3IPv4DefaultAcceptMode, and alaVRRPv3IPv4DefaultVersion. Unless alaVRRPv3IPv4Override is set to true only IPv4 virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, accept, and version values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.7 | INTEGER {none(1), all(2), interval(3), priority(4), preempt(5), accept(6), version(7)} | read-write | current |
| alaVRRPv3IPv4Override OBJECT-TYPE This object is used in combination with the alaVRRPv3IPv4SetParam object to force all IPv4 virtual routers in the vrrpv3Operations Table to revert to the default values specified in alaVRRPv3IPv4DefaultInterval, alaVRRPv3IPv4DefaultPriority, alaVRRPv3IPv4DefaultPreemptMode, and alaVRRPv3IPv4DefaultAcceptMode. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.8 | TruthValue | read-write | current |
| alaVRRPv3IPv6Config OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7 | |||
| alaVRRPv3IPv6DefaultInterval OBJECT-TYPE The VRRP version 3 IPv6 Router default time interval, in seconds, between sending advertisement messages. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.1 | TimeInterval (1..4095) | read-write | current |
| alaVRRPv3IPv6DefaultPriority OBJECT-TYPE The VRRP version 3 IPv6 Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.2 | Integer32 (1..254) | read-write | current |
| alaVRRPv3IPv6DefaultPreemptMode OBJECT-TYPE The VRRP version 3 IPv6 Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.3 | TruthValue | read-write | current |
| alaVRRPv3IPv6DefaultAcceptMode OBJECT-TYPE The VRRP version 3 IPv6 Router default accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.4 | TruthValue | read-write | current |
| alaVRRPv3IPv6AdminState OBJECT-TYPE This object is used to force a change in to the vrrpv3OperationsRowStatus of IPv6 virtual routers in the vrrpv3OperationsTable. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each IPv6 entry in the table to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of IPv6 virtual routers whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPv3IPv6AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each IPv6 entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.5 | INTEGER {allEnable(1), enable(2), disable(3)} | read-write | current |
| alaVRRPv3IPv6SetParam OBJECT-TYPE This object is used to force the IPv6 virtual routers in the vrrpv3OperationsTable to revert to the default parameter values specified in alaVRRPv3IPv6DefaultInterval, alaVRRPv3IPv6DefaultPriority, alaVRRPv3IPv6DefaultPreemptMode, alaVRRPv3IPv6DefaultAcceptMode. Unless alaVRRPv3IPv4Override is set to true only IPv6 virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, and accept values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.6 | INTEGER {none(1), all(2), interval(3), priority(4), preempt(5), accept(6)} | read-write | current |
| alaVRRPv3IPv6Override OBJECT-TYPE This object is used in combination with the alaVRRPv3IPv6SetParam object to force all IPv6 virtual routers in the vrrpv3Operations Table to revert to the default values specified in alaVRRPv3IPv6DefaultInterval, alaVRRPv3IPv6DefaultPriority, alaVRRPv3IPv6DefaultPreemptMode, and alaVRRPv3IPv6DefaultAcceptMode. This object is of little value when read but will return the last value to which it was set. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.7 | TruthValue | read-write | current |
| alcatelIND1VRRPMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2 | |||
| alcatelIND1VRRPMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1 | |||
| alcatelIND1VRRPMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| alaVRRPCompliance MODULE-COMPLIANCE The compliance statement for switches with Alcatel VRRP and implementing ALCATEL-IND1-VRRP-MIB. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1.1 | current |
| alaVRRPConfigGroup OBJECT-GROUP A collection of objects to support management of Alcatel VRRP. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.1 | current |
| alaVRRPv2ConfigGroup OBJECT-GROUP A collection of objects to support management of Alcatel VRRP | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.2 | current |
| alaVrrp3AssoTrackTableGroup OBJECT-GROUP The table of tracking policies associated with this virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.3 | current |
| alaVrrp3OperExEntryGroup OBJECT-GROUP Table of virtual router configuration info. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.4 | current |
| alaVrrpAssoGroupEntryGroup OBJECT-GROUP The table of virtual routers associated with this group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.5 | current |
| alaVrrpAssoTrackEntryGroup OBJECT-GROUP The table of tracking policies associated with this virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.6 | current |
| alaVrrpOperEntryGroup OBJECT-GROUP Config information about a given virtual router. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.7 | current |
| alaVrrpGroupTableGroup OBJECT-GROUP VRRP Group table objects with attributes of VRRP Group. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.8 | current |
| alaVrrpTrackGroup OBJECT-GROUP VRRP Tracking Policy objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.9 | current |
| alaVRRPv3IPv4ConfigGroup OBJECT-GROUP VRRP version 3 IPv4 default configuration objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.10 | current |
| alaVRRPv3IPv6ConfigGroup OBJECT-GROUP VRRP version 3 IPv6 default configuration objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.11 | current |
| alaVrrpv3GroupTableGroup OBJECT-GROUP VRRP version 3 group table objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.12 | current |
| alaVrrpv3AssoGroupEntryGroup OBJECT-GROUP VRRP version 3 associated group entry objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.13 | current |
| alaVrrpv3AssoTrackEntryGroup OBJECT-GROUP VRRP version 3 associated track entry objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.14 | current |
| alaVrrpv3OperationsExEntryGroup OBJECT-GROUP VRRP version 3 operations table extension objects. | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.15 | current |