ALCATEL-IND1-SAA-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.56.1
- Last updated
- 2019-11-27 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2019-11-27 00:00, 2009-07-21 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-SAA-MIB- Digest
sha256:e187dacc2c1430533561a886fde3cd98cf64d1a4cff9150abf09291753bb1709
Description
This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line Service Assurance agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | softentIND1Saa |
| IEEE8021-CFM-MIB | Dot1agCfmMaintAssocName, Dot1agCfmMaintDomainName |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-SAA-MIB BRIDGE-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IEEE8021-CFM-MIB IEEE8021-TC-MIB IF-MIB INET-ADDRESS-MIB LLDP-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alcatelIND1SaaNotifications OBJECT-IDENTITY Branch for Saa Notifications. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0 | current | ||
| alcatelIND1SaaMIBObjects OBJECT-IDENTITY Branch For Saa Objects. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1 | current | ||
| alaSaaCtrlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1 | |||
| alaSaaCtrlTable OBJECT-TYPE Defines the SAA control table for providing, via SNMP, the capability of performing SAA test operations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1 | not-accessible | current | |
| alaSaaCtrlEntry OBJECT-TYPE An entry in the alaSaaCtrlTable table, containing information on the Saa function for a single instance of the Saa. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1 | not-accessible | current | |
| alaSaaCtrlOwnerIndex OBJECT-TYPE Owner name to identify the responsiblity of the entries in the table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.1 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| alaSaaCtrlTestIndex OBJECT-TYPE Unique name to identify the entries in the table. The name is unique across various SNMP users. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.2 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| alaSaaCtrlRowStatus OBJECT-TYPE This object allows entries to be created and deleted in the table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.3 | RowStatus | read-create | current |
| alaSaaCtrlDescr OBJECT-TYPE User provided description string for the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.4 | DisplayString | read-create | current |
| alaSaaCtrlAdminStatus OBJECT-TYPE Indicates wether to start or stop the SAA test. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.5 | INTEGER {start(0), stop(1)} | read-create | current |
| alaSaaCtrlTestMode OBJECT-TYPE The type of SAA test to be performed. The undefined value corresponds to the case when an entry is created in the alaSaaCtrlTable table without specifying a value for this object. This value shall be updated when the user creates an entry for the corresponding saa in the alaSaaIpCtrlTable table, alaSaaEthoamCtrlTable table or alaSaaMacCtrlTable table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.6 | INTEGER {undefined(0), ipSaa(1), ethSaa(2), macSaa(3)} | read-only | current |
| alaSaaCtrlRuns OBJECT-TYPE Indicates number of times SAA test has been executed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.7 | Counter32 | read-only | current |
| alaSaaCtrlFailures OBJECT-TYPE Indicates the number of times this SAA test has failed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.8 | Counter32 | read-only | current |
| alaSaaCtrlLastRunResult OBJECT-TYPE The result of the latest SAA test iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.9 | INTEGER {undetermined(0), success(1), failed(2), aborted(3)} | read-only | current |
| alaSaaCtrlLastRunTime OBJECT-TYPE The time at which the last iteration of the SAA was run. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.10 | DateAndTime | read-only | current |
| alaSaaCtrlInterval OBJECT-TYPE Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.11 | Integer32 (1..1500) | read-create | current |
| alaSaaCtrlStartAt OBJECT-TYPE Specifies the time at which the SAA test is to be started. The deci-seconds specified in DateAndTime has no significance in scheduling SAA. The year in DateAndTime must be in the range from 1970 to 2037. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.12 | DateAndTime (SIZE(8)) | read-create | current |
| alaSaaCtrlStopAt OBJECT-TYPE Specifies the time at which the SAA test is to be stopped.Special value for DataAndTime which is 9999-12-31,23:59:59.0 is used to reset the existing configured value of this object, indicating that the SAA test should never stop. The deci-seconds in the DateAndTime has no significance in scheduling SAA.The year in DateAndTime must be in the range from 1970 to 2037. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.13 | DateAndTime (SIZE(8)) | read-create | current |
| alaSaaCtrlMaxHistoryRows OBJECT-TYPE Specifies the maximum number of iterations for which history data is maintained. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.14 | Integer32 | read-only | current |
| alaSaaCtrlJitterThreshold OBJECT-TYPE Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.15 | Integer32 (0..1000000) | read-create | current |
| alaSaaCtrlRTTThreshold OBJECT-TYPE Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.16 | Integer32 (0..1000000) | read-create | current |
| alaSaaIpCtrlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2 | |||
| alaSaaIpCtrlTable OBJECT-TYPE It defines the ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaIpResultsTable and alaSaaIpHistoryTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1 | not-accessible | current | |
| alaSaaIpCtrlEntry OBJECT-TYPE Entry for the alaSaaIpCtrl table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1 | not-accessible | current | |
| alaSaaIpCtrlOwnerIndex OBJECT-TYPE Owner name to identify the responsiblity of the entries in the table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaSaaIpCtrlTestIndex OBJECT-TYPE Unique name to identify the entries in the table. This name is unique across various SNMP users. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.2 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaSaaIpCtrlRowStatus OBJECT-TYPE Allows entries to be created and deleted in the table. createAndWait value is not supported for this object. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.3 | RowStatus | read-create | current |
| alaSaaIpCtrlTestMode OBJECT-TYPE Specifies the type of ping test defined by this entry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.4 | INTEGER {icmpEcho(1)} | read-create | current |
| alaSaaIpCtrlTgtAddrType OBJECT-TYPE Specifies the InetAddress type of host address to be used as the destination for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.5 | InetAddressType | read-create | current |
| alaSaaIpCtrlTgtAddress OBJECT-TYPE Specifies the IP host address to be used as the destination for performing a ping operation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.6 | InetAddress | read-create | current |
| alaSaaIpCtrlSrcAddrType OBJECT-TYPE Specifies the InetAddress type of host address to be used as the source for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.7 | InetAddressType | read-create | current |
| alaSaaIpCtrlSrcAddress OBJECT-TYPE Specifies the IP host address to be used as the source for performing a ping operation. The default value of this object is 0.0.0.0 if alaSaaIpCtrlSrcAddrType is set to ipv4. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.8 | InetAddress | read-create | current |
| alaSaaIpCtrlPayloadSize OBJECT-TYPE Specifies the size of the ICMP payload to be used for the ping operation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.9 | Integer32 (24..1472) | read-create | current |
| alaSaaIpCtrlNumPkts OBJECT-TYPE Specifies the number of packets to be sent in one ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.10 | Integer32 (1..100) | read-create | current |
| alaSaaIpCtrlInterPktDelay OBJECT-TYPE Specifies the delay between two consecutive packets transmitted during a ping iteration.The value specified should be a multiple of 100. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.11 | Integer32 (100..1000) | read-create | current |
| alaSaaIpCtrlTypeOfService OBJECT-TYPE Specifies the type of service | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.12 | Integer32 (0..255) | read-create | current |
| alaSaaIpCtrlVRFId OBJECT-TYPE Specifies the VRF ID. Only the value '0' is currently supported. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.13 | Integer32 (0..4096) | read-create | current |
| alaSaaIpCtrlTotalPktsSent OBJECT-TYPE Specifies the total number of packets sent during all the ping iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.14 | Counter32 | read-only | current |
| alaSaaIpCtrlTotalPktsRcvd OBJECT-TYPE Specifies the total number of packets received during all the ping iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.15 | Counter32 | read-only | current |
| alaSaaIpCtrlMinRTT OBJECT-TYPE Specifies the minimum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.16 | Integer32 | read-only | current |
| alaSaaIpCtrlAvgRTT OBJECT-TYPE Specifies the average round trip time of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.17 | Integer32 | read-only | current |
| alaSaaIpCtrlMaxRTT OBJECT-TYPE Specifies the maximum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.18 | Integer32 | read-only | current |
| alaSaaIpCtrlMinJitter OBJECT-TYPE Specifies the minimum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.19 | Integer32 | read-only | current |
| alaSaaIpCtrlAvgJitter OBJECT-TYPE Specifies the average jitter of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.20 | Integer32 | read-only | current |
| alaSaaIpCtrlMaxJitter OBJECT-TYPE Specifies the maximum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.21 | Integer32 | read-only | current |
| alaSaaIpCtrlTSMinRTT OBJECT-TYPE Specifies the timestamp of the iteration that gave the minimum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.22 | DateAndTime | read-only | current |
| alaSaaIpCtrlTSMaxRTT OBJECT-TYPE Specifies the timestamp of the iteration that gave the maximum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.23 | DateAndTime | read-only | current |
| alaSaaIpCtrlTSMinJitter OBJECT-TYPE Specifies the timestamp of the iteration that gave the minimum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.24 | DateAndTime | read-only | current |
| alaSaaIpCtrlTSMaxJitter OBJECT-TYPE Specifies the timestamp of the iteration that gave the maximum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.25 | DateAndTime | read-only | current |
| alaSaaIpResults OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3 | |||
| alaSaaIpResultsTable OBJECT-TYPE Defines the IP Results Table for providing the capability of performing IP Ping operations. The results of these operations are stored in the alaSaaIpResultsTable and the alaSaaIpHistoryTable. An entry is removed from the alaSaaIpResultsTable when its corresponding alaSaaCtrlEntry is deleted. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1 | not-accessible | current | |
| alaSaaIpResultsEntry OBJECT-TYPE Entry for the alaSaaResults table. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaIpCtrlTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1 | not-accessible | current | |
| alaSaaIpResultsTestRunIndex OBJECT-TYPE The value of alaSaaIpResultsTestRunIndex identifies the row entry that reports results for a single OAM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.1 | Unsigned32 (1..4294967295) | accessible-for-notify | current |
| alaSaaIpResultsPktsSent OBJECT-TYPE Specifies the number of packets sent during a single ping iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.2 | Counter32 | read-only | current |
| alaSaaIpResultsPktsRcvd OBJECT-TYPE Specifies the number of packets received during a single ping iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.3 | Counter32 | read-only | current |
| alaSaaIpResultsInterPktDelay OBJECT-TYPE Specifies the inter-packet-delay with which the packets were sent in the iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.4 | Integer32 | read-only | current |
| alaSaaIpResultsRunResult OBJECT-TYPE The result of the iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.5 | INTEGER {undetermined(0), success(1), failed(2), aborted(3)} | read-only | current |
| alaSaaIpResultsRunResultReason OBJECT-TYPE If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.6 | OCTET STRING (SIZE(0..255)) | read-only | current |
| alaSaaIpResultsRunTime OBJECT-TYPE The date and time at which the iteraton was run. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.7 | DateAndTime | read-only | current |
| alaSaaIpResultsMinRTT OBJECT-TYPE The minimum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.8 | Integer32 | read-only | current |
| alaSaaIpResultsAvgRTT OBJECT-TYPE The average round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.9 | Integer32 | read-only | current |
| alaSaaIpResultsMaxRTT OBJECT-TYPE The maximum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.10 | Integer32 | read-only | current |
| alaSaaIpResultsMinJitter OBJECT-TYPE Minumum jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.11 | Integer32 | read-only | current |
| alaSaaIpResultsAvgJitter OBJECT-TYPE Average jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.12 | Integer32 | read-only | current |
| alaSaaIpResultsMaxJitter OBJECT-TYPE Maximum jitter value | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.13 | Integer32 | read-only | current |
| alaSaaIpHistory OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4 | |||
| alaSaaIpHistoryTable OBJECT-TYPE It is the table for storing the results of a ping operation. An entry in this table is created when a ping operation is performed. Entries are removed from this table when its corresponding alaSaaCtrlEntry is deleted. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1 | not-accessible | current | |
| alaSaaIpHistoryEntry OBJECT-TYPE Entry of the alaSaaIpHistory table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1 | not-accessible | current | |
| alaSaaIpHistoryIndex OBJECT-TYPE An entry in this table is created when the result of a ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaIpPingCtrlEntry that a ping iteration result (alaSaaIpHistoryEntry) belongs to. The alaSaaIpHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.1 | Unsigned32 | not-accessible | current |
| alaSaaIpHistoryPktRTT OBJECT-TYPE The round trip time taken by a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.2 | Integer32 | read-only | current |
| alaSaaIpHistoryPktJitter OBJECT-TYPE The jitter value for a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.3 | Integer32 | read-only | current |
| alaSaaEthoamCtrlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5 | |||
| alaSaaEthoamCtrlTable OBJECT-TYPE Defines the table for providing, via SNMP, the capability of performing Ethernet Loopback and DMM test operations. The results of these tests are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1 | not-accessible | current | |
| alaSaaEthoamCtrlEntry OBJECT-TYPE Defines an entry in the alaSaaEthoamCtrlTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1 | not-accessible | current | |
| alaSaaEthoamCtrlOwnerIndex OBJECT-TYPE Owner name to identify the responsiblity of the entries in the table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.1 | SnmpAdminString | not-accessible | current |
| alaSaaEthoamCtrlTestIndex OBJECT-TYPE Unique name to identify the entries in the table. This name is unique across various SNMP users. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.2 | SnmpAdminString | not-accessible | current |
| alaSaaEthoamCtrlRowStatus OBJECT-TYPE This object allows entries to be created and deleted in the alaSaaEthoamCtrlTable. Deletion of an entry in this table results in all corresponding (same alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable entries being deleted. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.3 | RowStatus | read-create | current |
| alaSaaEthoamCtrlTestMode OBJECT-TYPE Specifies the type of Ethernet OAM test defined by this entry. ethernetLoopback - tests connectivity and round trip time by sending loopback requests. ethernetDmm - tests connectivity and round trip time by sending timestamped packets. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.4 | INTEGER {ethernetLoopback(1), ethernetDmm(2)} | read-create | current |
| alaSaaEthoamCtrlTgtMepId OBJECT-TYPE The Mep-Id of the destination to which the Ethernet Loopback or DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.5 | Integer32 | read-create | current |
| alaSaaEthoamCtrlTgtMAC OBJECT-TYPE The Target MAC Address of the destination to which the Ethernet Loopback or DMM message is to be sent: A unicast destination MAC address. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.6 | MacAddress | read-create | current |
| alaSaaEthoamCtrlSrcMepId OBJECT-TYPE The Mep-Id of the source node initiating the Ethernet Loopback or DMM message. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.7 | Integer32 | read-create | current |
| alaSaaEthoamCtrlDomainName OBJECT-TYPE The name of the domain to which the source Mep belongs. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.8 | Dot1agCfmMaintDomainName | read-create | current |
| alaSaaEthoamCtrlAssociationName OBJECT-TYPE The name of the association in the domain (specified by alaSaaEthoamCtrlDomainName) to which the source Mep belongs. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.9 | Dot1agCfmMaintAssocName | read-create | current |
| alaSaaEthoamCtrlPktTimeOut OBJECT-TYPE The maximum time to wait for the reply of the transmitted packet. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.10 | Integer32 | read-only | current |
| alaSaaEthoamCtrlNumPkts OBJECT-TYPE The number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.11 | Integer32 (1..100) | read-create | current |
| alaSaaEthoamCtrlInterPktDelay OBJECT-TYPE Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.12 | Integer32 (100..1000) | read-create | current |
| alaSaaEthoamCtrlPktData OBJECT-TYPE An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.13 | OCTET STRING (SIZE(0..255)) | read-create | current |
| alaSaaEthoamCtrlVlanPriority OBJECT-TYPE Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.14 | Integer32 (0..7) | read-create | obsolete |
| alaSaaEthoamCtrlDropEligible OBJECT-TYPE Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.15 | TruthValue | read-create | obsolete |
| alaSaaEthoamCtrlTotalPktsRcvd OBJECT-TYPE Specifies the total number of packets received during all the Eth-LB/DMM iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.16 | Unsigned32 | read-only | current |
| alaSaaEthoamCtrlTotalPktsSent OBJECT-TYPE Specifies the total number of packets sent during all the Eth-LB/DMM iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.17 | Unsigned32 | read-only | current |
| alaSaaEthoamCtrlMinRTT OBJECT-TYPE Specifies the minimum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.18 | Integer32 | read-only | current |
| alaSaaEthoamCtrlAvgRTT OBJECT-TYPE Specifies the average round trip time of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.19 | Integer32 | read-only | current |
| alaSaaEthoamCtrlMaxRTT OBJECT-TYPE Specifies the maximum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.20 | Integer32 | read-only | current |
| alaSaaEthoamCtrlMinJitter OBJECT-TYPE Specifies the minimum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.21 | Integer32 | read-only | current |
| alaSaaEthoamCtrlAvgJitter OBJECT-TYPE Specifies the average jitter of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.22 | Integer32 | read-only | current |
| alaSaaEthoamCtrlMaxJitter OBJECT-TYPE Specifies the maximum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.23 | Integer32 | read-only | current |
| alaSaaEthoamCtrlTSMinRTT OBJECT-TYPE The timestamp of the iteration that gave the minimum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.24 | DateAndTime | read-only | current |
| alaSaaEthoamCtrlTSMaxRTT OBJECT-TYPE The timestamp of the iteration that gave the maximum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.25 | DateAndTime | read-only | current |
| alaSaaEthoamCtrlTSMinJitter OBJECT-TYPE The timestamp of the iteration that gave the minimum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.26 | DateAndTime | read-only | current |
| alaSaaEthoamCtrlTSMaxJitter OBJECT-TYPE The timestamp of the iteration that gave the maximum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.27 | DateAndTime | read-only | current |
| alaSaaEthoamResults OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6 | |||
| alaSaaEthoamResultsTable OBJECT-TYPE Defines the Ethoam Results Table for providing the capability of performing Eth-LB/DMM operations. The results of these operations are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. An entry is removed from the alaSaaEthoamResultsTable when its corresponding alaSaaCtrlEntry is deleted. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1 | not-accessible | current | |
| alaSaaEthoamResultsEntry OBJECT-TYPE Defines an entry in the alaSaaEthoamResultsTable. The alaSaaEthoamResultsTable has the same indexing as the alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to correspond to the alaSaaEthoamCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaEthoamCtrlTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1 | not-accessible | current | |
| alaSaaEthoamResultsTestRunIndex OBJECT-TYPE The value of alaSaaEthoamResultsTestRunIndex identifies the row entry that reports results for a single Eth-LB/DMM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.1 | Unsigned32 | accessible-for-notify | current |
| alaSaaEthoamResultsPktsSent OBJECT-TYPE Specifies the number of packets sent during a single Eth-LB/DMM iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.2 | Unsigned32 | read-only | current |
| alaSaaEthoamResultsPktsRcvd OBJECT-TYPE Specifies the number of packets received during a single Eth-LB/DMM iteration | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.3 | Unsigned32 | read-only | current |
| alaSaaEthoamResultsInterPktDelay OBJECT-TYPE Specifies the inter-packet-delay with which the packets were sent in the iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.4 | Integer32 | read-only | current |
| alaSaaEthoamResultsRunResult OBJECT-TYPE The result of the Eth-LB/DMM iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.5 | INTEGER {undetermined(0), success(1), failed(2), aborted(3)} | read-only | current |
| alaSaaEthoamResultsRunResultReason OBJECT-TYPE If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.6 | OCTET STRING (SIZE(0..255)) | read-only | current |
| alaSaaEthoamResultsRunTime OBJECT-TYPE The date and time at which the iteraton was run. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.7 | DateAndTime | read-only | current |
| alaSaaEthoamResultsMinRTT OBJECT-TYPE The minimum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.8 | Integer32 | read-only | current |
| alaSaaEthoamResultsAvgRTT OBJECT-TYPE The average round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.9 | Integer32 | read-only | current |
| alaSaaEthoamResultsMaxRTT OBJECT-TYPE The maximum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.10 | Integer32 | read-only | current |
| alaSaaEthoamResultsMinJitter OBJECT-TYPE The minimum jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.11 | Integer32 | read-only | current |
| alaSaaEthoamResultsAvgJitter OBJECT-TYPE The average jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.12 | Integer32 | read-only | current |
| alaSaaEthoamResultsMaxJitter OBJECT-TYPE The maximum jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.13 | Integer32 | read-only | current |
| alaSaaEthoamHistory OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7 | |||
| alaSaaEthoamHistoryTable OBJECT-TYPE Defines a table for storing the results of an Eth-LB/DMM iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an Eth-LB/DMM test is determined. An entry is removed from this table when its corresponding alaSaaEthoamCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaEthoamHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaEthoamHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1 | not-accessible | current | |
| alaSaaEthoamHistoryEntry OBJECT-TYPE | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1 | not-accessible | current | |
| alaSaaEthoamHistoryIndex OBJECT-TYPE An entry in this table is created when the result of an Eth-LB/DMM iteration is determined. The initial 2 instance identifier index values identify the alaSaaEthoamCtrlEntry that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs to. The alaSaaEthoamHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.1 | Unsigned32 | not-accessible | current |
| alaSaaEthoamHistoryPktRTT OBJECT-TYPE The round trip time taken by a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.2 | Integer32 | read-only | current |
| alaSaaEthoamHistoryPktJitter OBJECT-TYPE The jitter value for a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.3 | Integer32 | read-only | current |
| alaSaaMacCtrlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8 | |||
| alaSaaMacCtrlTable OBJECT-TYPE It defines the MAC-Ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaMacResultsTable and alaSaaMacHistoryTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1 | not-accessible | current | |
| alaSaaMacCtrlEntry OBJECT-TYPE Entry for the alaSaaMacCtrl table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1 | not-accessible | current | |
| alaSaaMacCtrlOwnerIndex OBJECT-TYPE Owner name to identify the responsiblity of the entries in the table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaSaaMacCtrlTestIndex OBJECT-TYPE Unique name to identify the entries in the table. This name is unique across various SNMP users. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.2 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| alaSaaMacCtrlRowStatus OBJECT-TYPE Allows entries to be created and deleted in the table. createAndWait value is not supported for this object. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.3 | RowStatus | read-create | current |
| alaSaaMacCtrlDstAddress OBJECT-TYPE Specifies the mac address to be used as the destination for performing a MAC-Ping operation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.4 | MacAddress | read-create | current |
| alaSaaMacCtrlVlan OBJECT-TYPE The 12 bit Vlan value to be used in the VLAN tag, in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.5 | Integer32 (1..4094) | read-create | current |
| alaSaaMacCtrlVlanPriority OBJECT-TYPE Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.6 | Integer32 (0..7) | read-create | obsolete |
| alaSaaMacCtrlIsid OBJECT-TYPE The i-domain Service Indentifier (I-SID) which identifies the service instance in a PBB network on a BEB switch. For a customer packet flowing toward the b-domain, the I-SID is derived from the VFI and inserted into the packet. For a packet arrived from the b-domain, the I-SID is used to identify the VFI for the i-domain processing. From the service MIB. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.7 | Integer32 (256..16777214) | read-create | current |
| alaSaaMacCtrlPktData OBJECT-TYPE An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.8 | OCTET STRING (SIZE(0..255)) | read-create | current |
| alaSaaMacCtrlDropEligible OBJECT-TYPE Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.9 | TruthValue | read-create | obsolete |
| alaSaaMacCtrlPayloadSize OBJECT-TYPE Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.10 | Integer32 (32..1500) | read-create | current |
| alaSaaMacCtrlNumPkts OBJECT-TYPE Specifies the number of packets to be sent in one MAC-Ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.11 | Integer32 (1..100) | read-create | current |
| alaSaaMacCtrlInterPktDelay OBJECT-TYPE Specifies the delay between two consecutive packets transmitted during a MAC-Ping iteration.The value specified should be a multiple of 100. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.12 | Integer32 (100..1000) | read-create | current |
| alaSaaMacCtrlTotalPktsSent OBJECT-TYPE Specifies the total number of packets sent during all the ping iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.13 | Counter32 | read-only | current |
| alaSaaMacCtrlTotalPktsRcvd OBJECT-TYPE Specifies the total number of packets received during all the ping iterations. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.14 | Counter32 | read-only | current |
| alaSaaMacCtrlMinRTT OBJECT-TYPE Specifies the minimum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.15 | Integer32 | read-only | current |
| alaSaaMacCtrlAvgRTT OBJECT-TYPE Specifies the average round trip time of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.16 | Integer32 | read-only | current |
| alaSaaMacCtrlMaxRTT OBJECT-TYPE Specifies the maximum round trip time among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.17 | Integer32 | read-only | current |
| alaSaaMacCtrlMinJitter OBJECT-TYPE Specifies the minimum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.18 | Integer32 | read-only | current |
| alaSaaMacCtrlAvgJitter OBJECT-TYPE Specifies the average jitter of all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.19 | Integer32 | read-only | current |
| alaSaaMacCtrlMaxJitter OBJECT-TYPE Specifies the maximum jitter among all the iterations of the SAA. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.20 | Integer32 | read-only | current |
| alaSaaMacCtrlTSMinRTT OBJECT-TYPE Specifies the timestamp of the iteration that gave the minimum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.21 | DateAndTime | read-only | current |
| alaSaaMacCtrlTSMaxRTT OBJECT-TYPE Specifies the timestamp of the iteration that gave the maximum packet delay. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.22 | DateAndTime | read-only | current |
| alaSaaMacCtrlTSMinJitter OBJECT-TYPE Specifies the timestamp of the iteration that gave the minimum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.23 | DateAndTime | read-only | current |
| alaSaaMacCtrlTSMaxJitter OBJECT-TYPE Specifies the timestamp of the iteration that gave the maximum packet jitter. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.24 | DateAndTime | read-only | current |
| alaSaaMacResults OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9 | |||
| alaSaaMacResultsTable OBJECT-TYPE Defines the MAC-Ping Results Table for providing the capability of performing MAC-Ping operations. The results of these operations are stored in the alaSaaMacResultsTable and the alaSaaMacHistoryTable. An entry is removed from the alaSaaMacResultsTable when its corresponding alaSaaCtrlEntry is deleted. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1 | not-accessible | current | |
| alaSaaMacResultsEntry OBJECT-TYPE Defines an entry in the alaSaaMacResultsTable. The alaSaaMacResultsTable has the same indexing as the alaSaaMacCtrlTable in order for a alaSaaMacResultsEntry to correspond to the alaSaaMacCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaMacCtrlTable. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1 | not-accessible | current | |
| alaSaaMacResultsTestRunIndex OBJECT-TYPE The value of alaSaaMacResultsTestRunIndex identifies the row entry that reports results for a single test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.1 | Unsigned32 | accessible-for-notify | current |
| alaSaaMacResultsPktsSent OBJECT-TYPE Specifies the number of packets sent during a single MAC-Ping iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.2 | Unsigned32 | read-only | current |
| alaSaaMacResultsPktsRcvd OBJECT-TYPE Specifies the number of packets received during a single MAC-Ping iteration | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.3 | Unsigned32 | read-only | current |
| alaSaaMacResultsInterPktDelay OBJECT-TYPE Specifies the inter-packet-delay with which the packets were sent in the iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.4 | Integer32 | read-only | current |
| alaSaaMacResultsRunResult OBJECT-TYPE The result of the MAC-Ping iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.5 | INTEGER {undetermined(0), success(1), failed(2), aborted(3)} | read-only | current |
| alaSaaMacResultsRunResultReason OBJECT-TYPE If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.6 | OCTET STRING (SIZE(0..255)) | read-only | current |
| alaSaaMacResultsRunTime OBJECT-TYPE The date and time at which the iteraton was run. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.7 | DateAndTime | read-only | current |
| alaSaaMacResultsMinRTT OBJECT-TYPE The minimum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.8 | Integer32 | read-only | current |
| alaSaaMacResultsAvgRTT OBJECT-TYPE The average round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.9 | Integer32 | read-only | current |
| alaSaaMacResultsMaxRTT OBJECT-TYPE The maximum round trip time. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.10 | Integer32 | read-only | current |
| alaSaaMacResultsMinJitter OBJECT-TYPE The minimum jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.11 | Integer32 | read-only | current |
| alaSaaMacResultsAvgJitter OBJECT-TYPE The average jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.12 | Integer32 | read-only | current |
| alaSaaMacResultsMaxJitter OBJECT-TYPE The maximum jitter value. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.13 | Integer32 | read-only | current |
| alaSaaMacHistory OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10 | |||
| alaSaaMacHistoryTable OBJECT-TYPE Defines a table for storing the results of a MAC-Ping iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an MAC-Ping test is determined. An entry is removed from this table when its corresponding alaSaaMacCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaMacHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaMacHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1 | not-accessible | current | |
| alaSaaMacHistoryEntry OBJECT-TYPE | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1 | not-accessible | current | |
| alaSaaMacHistoryIndex OBJECT-TYPE An entry in this table is created when the result of an MAC-ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaMacCtrlEntry that an MAC-ping iteration result (alaSaaMacHistoryEntry) belongs to. The alaSaaMacHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.1 | Unsigned32 | not-accessible | current |
| alaSaaMacHistoryPktRTT OBJECT-TYPE The round trip time taken by a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.2 | Integer32 | read-only | current |
| alaSaaMacHistoryPktJitter OBJECT-TYPE The jitter value for a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.3 | Integer32 | read-only | current |
| alaSaaMacResultsPort OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11 | |||
| alaSaaMacResultsPortTable OBJECT-TYPE Defines a table for storing the results of ports for a MAC-Ping iteration. It only holds results from the last iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1 | not-accessible | current | |
| alaSaaMacResultsPortEntry OBJECT-TYPE | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1 | not-accessible | current | |
| alaSaaMacResultsPortChassis OBJECT-TYPE The chassis number of the entry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.1 | Integer32 (0..2147483647) | accessible-for-notify | current |
| alaSaaMacResultsPortSlot OBJECT-TYPE The slot number of the entry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.2 | Integer32 (0..2147483647) | accessible-for-notify | current |
| alaSaaMacResultsPortPort OBJECT-TYPE The port number of the entry. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.3 | Integer32 (0..2147483647) | accessible-for-notify | current |
| alaSaaMacResultsPortPktsSent OBJECT-TYPE The number of transmit packets. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.4 | Integer32 | read-only | current |
| alaSaaMacResultsPortPktsRcvd OBJECT-TYPE The number of receive packets. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.5 | Integer32 | read-only | current |
| alaSaaMacResultsPortRTT OBJECT-TYPE The round trip time taken by a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.6 | Integer32 | read-only | current |
| alaSaaMacResultsPortMinRTT OBJECT-TYPE The minimum round trip time taken by a single packet for the port. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.7 | Integer32 | read-only | current |
| alaSaaMacResultsPortMaxRTT OBJECT-TYPE The maximum round trip time taken by a single for the port. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.8 | Integer32 | read-only | current |
| alaSaaMacResultsPortJitter OBJECT-TYPE The jitter value for a single packet in an iteration. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.9 | Integer32 | read-only | current |
| alaSaaMacResultsPortMinJitter OBJECT-TYPE The minimum jitter value for a single packet for the port. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.10 | Integer32 | read-only | current |
| alaSaaMacResultsPortMaxJitter OBJECT-TYPE The maximum jitter value for a single packet for the port. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.11 | Integer32 | read-only | current |
| alaSaaXmlFeature OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13 | |||
| alaSaaXmlStatus OBJECT-TYPE Enables the XML file feature. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.1 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaSaaXmlFilename OBJECT-TYPE Save file location. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.2 | SnmpAdminString (SIZE(1..64)) | read-create | current |
| alaSaaXmlInterval OBJECT-TYPE Interval where SAA will save the file. The value is in minutes. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.3 | Integer32 (5..15000) | read-create | current |
| alaSaaSpbFeature OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14 | |||
| alaSaaSpbAutoCreate OBJECT-TYPE Determines if the SPB VLANs are automatically configured. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.1 | INTEGER {on(1), off(2)} | read-write | current |
| alaSaaSpbAutoStart OBJECT-TYPE Determines if the SPB VLANs are automatically started. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.2 | INTEGER {on(1), off(2)} | read-write | current |
| alaSaaSpbInterval OBJECT-TYPE Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.3 | Integer32 (1..1500) | read-write | current |
| alaSaaSpbNumPkts OBJECT-TYPE The number of packets to be sent in one iteration of Eth-LB/DMM test. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.4 | Integer32 (1..100) | read-write | current |
| alaSaaSpbInterPktDelay OBJECT-TYPE Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.5 | Integer32 (100..1000) | read-write | current |
| alaSaaSpbPayloadSize OBJECT-TYPE Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.6 | Integer32 (32..1500) | read-write | current |
| alaSaaSpbVlanPriority OBJECT-TYPE Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.7 | Integer32 (0..7) | read-write | obsolete |
| alaSaaSpbDropEligible OBJECT-TYPE Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.8 | TruthValue | read-write | obsolete |
| alaSaaSpbPktData OBJECT-TYPE An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.9 | OCTET STRING (SIZE(0..255)) | read-write | current |
| alaSaaSpbJitterThreshold OBJECT-TYPE Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.10 | Integer32 (0..1000000) | read-write | current |
| alaSaaSpbRTTThreshold OBJECT-TYPE Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.11 | Integer32 (0..1000000) | read-write | current |
| alaSaaSpbReset OBJECT-TYPE When set TRUE, will set the alaSaaSpbFeature variables to the defualts. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.12 | TruthValue | read-write | current |
| alaSaaSpbKeep OBJECT-TYPE When set on, SPB sessions will not be deallocated when SPB indicates a MAC or VLAN went away. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.13 | INTEGER {on(1), off(2)} | read-write | current |
| alaSaaSpbFlush OBJECT-TYPE When set TRUE, SPB sessions will be flushed and reallocated with the current SPB MACs and VLANs. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.14 | TruthValue | read-write | current |
| saaTrapsObj OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.15 | |||
| alaSaaJitterCalculationConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.16 | |||
| alaSaaJitterCalculation OBJECT-TYPE Configure Jitter Calculation mode as Enhanced. When not configured explicitly it is set to default. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.16.1 | INTEGER {default(1), enhanced(2)} | read-write | current |
| alcatelIND1SaaMIBConformance OBJECT-IDENTITY Branch for Saa Module MIB Subsystem Conformance Information. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2 | current | ||
| alcatelIND1SaaMIBGroups OBJECT-IDENTITY Branch for Saa Module MIB Subsystem Units of Conformance. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1 | current | ||
| alcatelIND1SaaMIBCompliances OBJECT-IDENTITY Branch for Saa Module MIB Subsystem Compliance Statements. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2 | current |
Notifications
| Name | OID | Status |
|---|---|---|
| alaSaaIPIterationCompleteTrap NOTIFICATION-TYPE A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.1 | current |
| alaSaaEthIterationCompleteTrap NOTIFICATION-TYPE A alaSaaEthIterationCompleteTrap notification is sent when a Eth-LB or Eth-DMM SAA iteration is completed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.2 | current |
| alaSaaMacIterationCompleteTrap NOTIFICATION-TYPE A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.3 | current |
| alaSaaPacketLossTrap NOTIFICATION-TYPE A alaSaaPacketLossTrap notification is sent when a packet is lost during a test. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.4 | current |
| alaSaaJitterThresholdYellowTrap NOTIFICATION-TYPE A alaSaaJitterThresholdTrap notification is sent when 90% of the Jitter Threshold is crossed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.5 | current |
| alaSaaRTTThresholdYellowTrap NOTIFICATION-TYPE A alaSaaRTTThresholdYellowTrap notification is sent when 90% of the RTT Threshold is crossed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.6 | current |
| alaSaaJitterThresholdRedTrap NOTIFICATION-TYPE A alaSaaJitterThresholdTrap notification is sent when the Jitter Threshold is crossed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.7 | current |
| alaSaaRTTThresholdRedTrap NOTIFICATION-TYPE A alaSaaRTTThresholdRedTrap notification is sent when the RTT Threshold is crossed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.8 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| alaSaaCtrlConfigGroup OBJECT-GROUP Collection of objects for management of Saa control Group. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.1 | current |
| alaSaaIpCtrlConfigGroup OBJECT-GROUP Collection of objects for management of Saa Ip Configuration Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.2 | current |
| alaSaaIpResultsGroup OBJECT-GROUP Collection of objects for management of Saa Ip Results Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.3 | current |
| alaSaaIpHistoryGroup OBJECT-GROUP Collection of objects for management of Saa Ip history table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.4 | current |
| alaSaaEthoamCtrlConfigGroup OBJECT-GROUP Collection of objects for management of Saa Ethoam Configuration Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.5 | current |
| alaSaaEthoamResultsGroup OBJECT-GROUP Collection of objects for management of Saa Ethoam Results Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.6 | current |
| alaSaaEthoamHistoryGroup OBJECT-GROUP Collection of objects for management of Saa Ethoam history table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.7 | current |
| alaSaaMacCtrlConfigGroup OBJECT-GROUP Collection of objects for management of Saa MAC-Ping Configuration Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.8 | current |
| alaSaaMacResultsGroup OBJECT-GROUP Collection of objects for management of Saa MAC-Ping Results Table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.9 | current |
| alaSaaMacHistoryGroup OBJECT-GROUP Collection of objects for management of Saa Mac-Ping History table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.10 | current |
| alaSaaNotificationsGroup NOTIFICATION-GROUP A collection of notifications used by SAA to signal to a management entity that SAA iteration has completed. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.11 | current |
| alaSaaMacResultsPortGroup OBJECT-GROUP Collection of objects for management of Saa Mac-Ping Port table. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.12 | current |
| alaSaaXmlGroup OBJECT-GROUP Collection of objects for management of profile bindings. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.13 | current |
| alaSaaSpbGroup OBJECT-GROUP Collection of objects for management of profile bindings. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.14 | current |
| alaSaaJitterCalculationConfigGroup OBJECT-GROUP Collection of objects for management of jitter calculation. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.15 | current |
| alcatelIND1SaaMIBCompliance MODULE-COMPLIANCE Compliance statement for Saa. | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2.1 | current |