ALCATEL-IND1-ROUTEMAP-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.10.2.3
- Last updated
- 2020-07-07 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2020-07-07 00:00, 2020-05-14 00:00, 2019-11-27 00:00, 2007-04-03 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-ROUTEMAP-MIB- Digest
sha256:63daf5f3dd1f2a419bcee5fd3f7946a8ac39e6ff2ffc8dc716f300e1bcb342a5
Description
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IP Route Maps global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | routingIND1Iprm |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-ROUTEMAP-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlaRouteMapAction TEXTUAL-CONVENTION Determines whether a Route Map or Access List address should be permitted or denied. | current | |||
| AlaRouteMapRedistControl TEXTUAL-CONVENTION allSubnets matches all subnets of this prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix. | current | |||
| AlaRouteMapType TEXTUAL-CONVENTION The set of Route Map Match and Route Map Set Elements. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alcatelIND1RouteMapMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1 | |||
| alaRouteMapConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1 | |||
| alaRouteMapRedistProtoTable OBJECT-TYPE Protocol based configuration for route redistribution. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1 | not-accessible | current | |
| alaRouteMapRedistProtoEntry OBJECT-TYPE Identifies the source protocol and Route Map to be matched for route redistribution. If the route matches one of the source protocols Route Maps, and the Route Map is of type permit, then the route will be redistributed to the destination protocol. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1 | not-accessible | current | |
| alaRouteMapRedistSrcProtoId OBJECT-TYPE The source protocol of the route to be redistributed. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.1 | INTEGER {other(1), local(2), static(3), rip(4), ospf(5), bgp(6), ripng(7), ospfv3(8), bgp6(9), isis(10), isis6(11), import(12), spbMgmt(13)} | not-accessible | current |
| alaRouteMapRedistDestProtoId OBJECT-TYPE The protocol that a route is distributed into. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.2 | INTEGER {rip(1), ospf(2), bgp(3), ripng(4), ospfv3(5), bgp6(6), isis(7), isis6(8), spbMgmt(9), spbMgmtv6(10)} | not-accessible | current |
| alaRouteMapRedistRouteMapIndex OBJECT-TYPE Index indicating Route Map to use for redistribution match. In the destroy case the value 0 indicates all route-maps. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.3 | Unsigned32 | not-accessible | current |
| alaRouteMapRedistStatus OBJECT-TYPE Enable or disable the reditribution of routes into the specified protocol. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.4 | INTEGER {enable(1), disable(2)} | read-create | current |
| alaRouteMapRedistAddressType OBJECT-TYPE The address family of the source and destination protocols. The set is constrained to ipv4 and ipv6. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.5 | InetAddressType | read-only | current |
| alaRouteMapRedistRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.6 | RowStatus | read-create | current |
| alaRouteMapAccessListNameTable OBJECT-TYPE Table containing Access List name to Access List bindings. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2 | not-accessible | current | |
| alaRouteMapAccessListNameEntry OBJECT-TYPE Each entry binds an Access List Name to an Access List index. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1 | not-accessible | current | |
| alaRouteMapAccessListName OBJECT-TYPE The name of an Access List. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.1 | SnmpAdminString (SIZE(1..20)) | not-accessible | current |
| alaRouteMapAccessListNameIndex OBJECT-TYPE The index associated with the Access List name. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.2 | Unsigned32 | read-only | current |
| alaRouteMapAccessListNameAddressType OBJECT-TYPE The type of address in this Access List. The set is constrained to ipv4 and ipv6. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.3 | InetAddressType | read-create | current |
| alaRouteMapAccessListNameRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.4 | RowStatus | read-create | current |
| alaRouteMapAccessListTable OBJECT-TYPE This table contains all Access Lists configured on the switch. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3 | not-accessible | current | |
| alaRouteMapAccessListEntry OBJECT-TYPE Each entry identifies an IPv4 or IPv6 address or subnet to match for route redistribution. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1 | not-accessible | current | |
| alaRouteMapAccessListIndex OBJECT-TYPE The index associated with the Access List name. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.1 | Unsigned32 (0..65535) | not-accessible | current |
| alaRouteMapAccessListAddressType OBJECT-TYPE The type of address in this Access List Table Entry. The set is constrained to ipv4 and ipv6. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.2 | InetAddressType | not-accessible | current |
| alaRouteMapAccessListAddress OBJECT-TYPE The IPv4 or IPv6 address associated with this access list entry. The type is identified by alaRouteMapAccessListAddressType. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.3 | InetAddress | not-accessible | current |
| alaRouteMapAccessListPrefixLength OBJECT-TYPE The prefix length in bits of the IPv4 or IPv6 address associated with this Access List entry. The maximum for IPv4 is 32. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.4 | Integer32 (0..128) | not-accessible | current |
| alaRouteMapAccessListRedistControl OBJECT-TYPE Controls how a route is matched and redistributed. allSubnets matches all subnets of the prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.5 | AlaRouteMapRedistControl | read-create | current |
| alaRouteMapAccessListAction OBJECT-TYPE Controls whether an address should be redistributed or denied, if an Access list entry is matched. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.6 | AlaRouteMapAction | read-create | current |
| alaRouteMapAccessListRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.7 | RowStatus | read-create | current |
| alaRouteMapNameTable OBJECT-TYPE Table containing Route Map name to Route Map index bindings. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4 | not-accessible | current | |
| alaRouteMapNameEntry OBJECT-TYPE Each entry binds a Route Map Name to a Route Map index. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1 | not-accessible | current | |
| alaRouteMapName OBJECT-TYPE The name of a Route Map. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.1 | SnmpAdminString (SIZE(1..20)) | not-accessible | current |
| alaRouteMapNameIndex OBJECT-TYPE The index associated with the Route Map name. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.2 | Unsigned32 | read-only | current |
| alaRouteMapNameRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.3 | RowStatus | read-create | current |
| alaRouteMapSequenceTable OBJECT-TYPE Table binds a sequence to a Route Map. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5 | not-accessible | current | |
| alaRouteMapSequenceEntry OBJECT-TYPE Each entry binds a Route Map and a Sequence. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1 | not-accessible | current | |
| alaRouteMapSequenceIndex OBJECT-TYPE A Route Map Index. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.1 | Unsigned32 | not-accessible | current |
| alaRouteMapSequenceNumber OBJECT-TYPE The Sequence Number indicating the position of sequences with the same Route Map index. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.2 | Unsigned32 (1..100) | not-accessible | current |
| alaRouteMapSequenceAction OBJECT-TYPE Controls whether a sequence, if matched, should be redistributed or denied. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.3 | AlaRouteMapAction | read-create | current |
| alaRouteMapSequenceRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.4 | RowStatus | read-create | current |
| alaRouteMapTable OBJECT-TYPE Protocol based configuration for route redistribution. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6 | not-accessible | current | |
| alaRouteMapEntry OBJECT-TYPE Each entry describes a match or set clause in a Route Map. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1 | not-accessible | current | |
| alaRouteMapIndex OBJECT-TYPE The index associated with the Route Map name. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.1 | Unsigned32 | not-accessible | current |
| alaRouteMapSequence OBJECT-TYPE Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.2 | Unsigned32 (0..100) | not-accessible | current |
| alaRouteMapType OBJECT-TYPE The type of match or set command in this entry. Route Map rows with the same Route Map Name, Sequence Number and Match/Set Type form a group. An entry within the group is uniquely identified by this Route Map Table object. Any match within the group is considered a successful match for the entire group, and matching will continue with the next group. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.3 | AlaRouteMapType | not-accessible | current |
| alaRouteMapValue OBJECT-TYPE The string following the match or set keyword in a Route Map CLI command. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.4 | SnmpAdminString (SIZE(1..128)) | not-accessible | current |
| alaRouteMapRowStatus OBJECT-TYPE Controls creation and deletion of Row Status entries. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.5 | RowStatus | read-create | current |
| alcatelIND1RouteMapMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2 | |||
| alcatelIND1RouteMapMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1 | |||
| alcatelIND1RouteMapMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| alaRouteMapCompliance MODULE-COMPLIANCE The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-ROUTEMAP MIB. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1.1 | current |
| alaRouteMapConfigMIBGroup OBJECT-GROUP A collection of objects to support management of global configuration parameters of the Route Map Module. | 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2.1 | current |