MIBs Depot

ALCATEL-IND1-QOS-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.22.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2014-07-14 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-QOS-MIB
Digest
sha256:2aa1d557f84b3255af63ff7dac26c843776854caaa590ec95f132ec294d8e6a7

Description

QoS and Filtering MIB Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1QoS
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-TCIpv6Address, Ipv6IfIndexOrZero
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-QOS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alaQoSMIBObjects
OBJECT-IDENTITY
Branch for QoS Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1current
alaQoSRuleTable
OBJECT-TYPE
Table of QoS Rule definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1not-accessiblecurrent
alaQoSRuleEntry
OBJECT-TYPE
Definition of QoS Rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1not-accessiblecurrent
alaQoSRuleName
OBJECT-TYPE
Name of rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSRuleEnabled
OBJECT-TYPE
Is this rule enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.2INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSRuleSource
OBJECT-TYPE
What entity created the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.3INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSRulePrecedence
OBJECT-TYPE
Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.4Integer32 (0..65535)read-createcurrent
alaQoSRuleCondition
OBJECT-TYPE
Name of the condition to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.5SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSRuleAction
OBJECT-TYPE
Name of the action to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.6SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSRuleReflexive
OBJECT-TYPE
Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.7INTEGER {yes(1), no(2)}read-createcurrent
alaQoSRuleSave
OBJECT-TYPE
Indicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.8INTEGER {yes(1), no(2)}read-createcurrent
alaQoSRuleLog
OBJECT-TYPE
Indicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.9INTEGER {yes(1), no(2)}read-createcurrent
alaQoSRuleEnforced
OBJECT-TYPE
Is this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.10INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSRuleActive
OBJECT-TYPE
Is this rule enforcable by the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.11INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSRuleRowStatus
OBJECT-TYPE
Used to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.12RowStatusread-createcurrent
alaQoSRuleValidityPeriod
OBJECT-TYPE
Name of the validity period to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.13SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSRuleValidityPeriodStatus
OBJECT-TYPE
Status field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSRuleLogInterval
OBJECT-TYPE
How often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.15Integer32 (0..3600)read-createcurrent
alaQoSRuleCountType
OBJECT-TYPE
Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.16INTEGER {packets(1), bytes(2)}read-createcurrent
alaQoSRulePacketCount
OBJECT-TYPE
Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.17Counter64read-onlycurrent
alaQoSRuleByteCount
OBJECT-TYPE
Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.18Counter64read-onlycurrent
alaQoSRuleType
OBJECT-TYPE
The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.19Integer32read-onlycurrent
alaQoSRuleTrapEvents
OBJECT-TYPE
Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.20INTEGER {yes(1), no(2)}read-createdeprecated
alaQoSRuleDefaultList
OBJECT-TYPE
This rule belongs to the default policy list.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.21INTEGER {yes(1), no(2)}read-createcurrent
alaQoSRuleGreenPacketCount
OBJECT-TYPE
Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.22Counter64read-onlycurrent
alaQoSRuleYellowPacketCount
OBJECT-TYPE
Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.23Counter64read-onlycurrent
alaQoSRuleRedPacketCount
OBJECT-TYPE
Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.24Counter64read-onlycurrent
alaQoSRuleGreenByteCount
OBJECT-TYPE
Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.25Counter64read-onlycurrent
alaQoSRuleYellowByteCount
OBJECT-TYPE
Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.26Counter64read-onlycurrent
alaQoSRuleRedByteCount
OBJECT-TYPE
Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.27Counter64read-onlycurrent
alaQoSAppliedRuleTable
OBJECT-TYPE
Table of QoS AppliedRule definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2not-accessiblecurrent
alaQoSAppliedRuleEntry
OBJECT-TYPE
Definition of QoS AppliedRule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1not-accessiblecurrent
alaQoSAppliedRuleName
OBJECT-TYPE
Name of rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedRuleEnabled
OBJECT-TYPE
Is this rule enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.2INTEGER {enable(1), disable(2)}read-onlycurrent
alaQoSAppliedRuleSource
OBJECT-TYPE
What entity created the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.3INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedRulePrecedence
OBJECT-TYPE
Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.4Integer32 (0..65535)read-onlycurrent
alaQoSAppliedRuleCondition
OBJECT-TYPE
Name of the condition to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.5SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedRuleAction
OBJECT-TYPE
Name of the action to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.6SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedRuleReflexive
OBJECT-TYPE
Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.7INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedRuleSave
OBJECT-TYPE
Indicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.8INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedRuleLog
OBJECT-TYPE
Indicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.9INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedRuleEnforced
OBJECT-TYPE
Is this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.10INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedRuleActive
OBJECT-TYPE
Is this rule enforcable by the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.11INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedRuleRowStatus
OBJECT-TYPE
Used to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.12RowStatusread-createcurrent
alaQoSAppliedRuleValidityPeriod
OBJECT-TYPE
Name of the validity period to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.13SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedRuleValidityPeriodStatus
OBJECT-TYPE
Status field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedRuleLogInterval
OBJECT-TYPE
How often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.15Integer32 (0..3600)read-onlycurrent
alaQoSAppliedRuleCountType
OBJECT-TYPE
Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.16INTEGER {packets(1), bytes(2)}read-onlycurrent
alaQoSAppliedRulePacketCount
OBJECT-TYPE
Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.17Counter64read-onlycurrent
alaQoSAppliedRuleByteCount
OBJECT-TYPE
Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.18Counter64read-onlycurrent
alaQoSAppliedRuleType
OBJECT-TYPE
The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.19Integer32read-onlycurrent
alaQoSAppliedRuleTrapEvents
OBJECT-TYPE
Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.20INTEGER {yes(1), no(2)}read-createcurrent
alaQoSAppliedRuleDefaultList
OBJECT-TYPE
This rule belongs to the default policy list.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.21INTEGER {yes(1), no(2)}read-createcurrent
alaQoSAppliedRuleGreenPacketCount
OBJECT-TYPE
Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.22Counter64read-onlycurrent
alaQoSAppliedRuleYellowPacketCount
OBJECT-TYPE
Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.23Counter64read-onlycurrent
alaQoSAppliedRuleRedPacketCount
OBJECT-TYPE
Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.24Counter64read-onlycurrent
alaQoSAppliedRuleGreenByteCount
OBJECT-TYPE
Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.25Counter64read-onlycurrent
alaQoSAppliedRuleYellowByteCount
OBJECT-TYPE
Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.26Counter64read-onlycurrent
alaQoSAppliedRuleRedByteCount
OBJECT-TYPE
Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.27Counter64read-onlycurrent
alaQoSConditionTable
OBJECT-TYPE
Table of QoS Condition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3not-accessiblecurrent
alaQoSConditionEntry
OBJECT-TYPE
Definition of QoS Condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1not-accessiblecurrent
alaQoSConditionName
OBJECT-TYPE
Name of condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSConditionSource
OBJECT-TYPE
What entity created the condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSConditionSourceSlot
OBJECT-TYPE
Source physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.3Integer32 (0..16)read-createcurrent
alaQoSConditionSourceSlotStatus
OBJECT-TYPE
Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourcePort
OBJECT-TYPE
Source physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.5Integer32 (0..255)read-createcurrent
alaQoSConditionSourcePortGroup
OBJECT-TYPE
Source physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.6SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionSourcePortGroupStatus
OBJECT-TYPE
Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationSlot
OBJECT-TYPE
Destination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.8Integer32 (0..16)read-createcurrent
alaQoSConditionDestinationSlotStatus
OBJECT-TYPE
Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.9INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationPort
OBJECT-TYPE
Destination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.10Integer32 (0..255)read-createcurrent
alaQoSConditionDestinationPortGroup
OBJECT-TYPE
Destination physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.11SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionDestinationPortGroupStatus
OBJECT-TYPE
Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceMacAddr
OBJECT-TYPE
Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.13MacAddressread-createcurrent
alaQoSConditionSourceMacAddrStatus
OBJECT-TYPE
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceMacMask
OBJECT-TYPE
Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.15MacAddressread-createcurrent
alaQoSConditionSourceMacGroup
OBJECT-TYPE
Source MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.16SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionSourceMacGroupStatus
OBJECT-TYPE
Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.17INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationMacAddr
OBJECT-TYPE
Destination MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.18MacAddressread-createcurrent
alaQoSConditionDestinationMacAddrStatus
OBJECT-TYPE
Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationMacMask
OBJECT-TYPE
Destination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.20MacAddressread-createcurrent
alaQoSConditionDestinationMacGroup
OBJECT-TYPE
Destination MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.21SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionDestinationMacGroupStatus
OBJECT-TYPE
Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.22INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceVlan
OBJECT-TYPE
Source VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.23Integer32 (0..4095)read-createcurrent
alaQoSConditionSourceVlanStatus
OBJECT-TYPE
Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.24INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationVlan
OBJECT-TYPE
Destination VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.25Integer32 (0..4095)read-createcurrent
alaQoSConditionDestinationVlanStatus
OBJECT-TYPE
Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.26INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSCondition8021p
OBJECT-TYPE
802.1p value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.27Integer32 (0..7)read-createcurrent
alaQoSCondition8021pStatus
OBJECT-TYPE
Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.28INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceIpAddr
OBJECT-TYPE
Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.29IpAddressread-createcurrent
alaQoSConditionSourceIpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.30INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceIpMask
OBJECT-TYPE
Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.31IpAddressread-createcurrent
alaQoSConditionSourceNetworkGroup
OBJECT-TYPE
Source network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.32SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionSourceNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.33INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationIpAddr
OBJECT-TYPE
Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.34IpAddressread-createcurrent
alaQoSConditionDestinationIpAddrStatus
OBJECT-TYPE
Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.35INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationIpMask
OBJECT-TYPE
Destination IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.36IpAddressread-createcurrent
alaQoSConditionDestinationNetworkGroup
OBJECT-TYPE
Destination network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.37SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionDestinationNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.38INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionMulticastIpAddr
OBJECT-TYPE
Multicast IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.39IpAddressread-createcurrent
alaQoSConditionMulticastIpAddrStatus
OBJECT-TYPE
Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionMulticastIpMask
OBJECT-TYPE
Multicast IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.41IpAddressread-createcurrent
alaQoSConditionMulticastNetworkGroup
OBJECT-TYPE
Multicast network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.42SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionMulticastNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.43INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTos
OBJECT-TYPE
TOS value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.44Integer32 (0..7)read-createcurrent
alaQoSConditionTosStatus
OBJECT-TYPE
Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.45INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTosMask
OBJECT-TYPE
TOS mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.46Integer32 (0..7)read-createcurrent
alaQoSConditionDscp
OBJECT-TYPE
DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.47Integer32 (0..63)read-createcurrent
alaQoSConditionDscpStatus
OBJECT-TYPE
Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.48INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDscpMask
OBJECT-TYPE
DSCP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.49Integer32 (0..63)read-createcurrent
alaQoSConditionIpProtocol
OBJECT-TYPE
IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.50Integer32 (0..255)read-createcurrent
alaQoSConditionIpProtocolStatus
OBJECT-TYPE
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.51INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceIpPort
OBJECT-TYPE
Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.52Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceIpPortStatus
OBJECT-TYPE
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.53INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationIpPort
OBJECT-TYPE
Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.54Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationIpPortStatus
OBJECT-TYPE
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.55INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionService
OBJECT-TYPE
Name of service to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.56SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionServiceStatus
OBJECT-TYPE
Status field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.57INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionServiceGroup
OBJECT-TYPE
Name of service group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.58SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionServiceGroupStatus
OBJECT-TYPE
Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.59INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionIcmpType
OBJECT-TYPE
ICMP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.60Integer32 (0..255)read-createcurrent
alaQoSConditionIcmpTypeStatus
OBJECT-TYPE
Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.61INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionIcmpCode
OBJECT-TYPE
ICMP code to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.62Integer32 (0..255)read-createcurrent
alaQoSConditionIcmpCodeStatus
OBJECT-TYPE
Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.63INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionRowStatus
OBJECT-TYPE
Used to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.64RowStatusread-createcurrent
alaQoSConditionSourcePortEnd
OBJECT-TYPE
Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.65Integer32 (0..255)read-createcurrent
alaQoSConditionDestinationPortEnd
OBJECT-TYPE
Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.66Integer32 (0..255)read-createcurrent
alaQoSConditionSourceIpPortEnd
OBJECT-TYPE
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.67Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationIpPortEnd
OBJECT-TYPE
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.68Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceTcpPort
OBJECT-TYPE
Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.69Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceTcpPortStatus
OBJECT-TYPE
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.70INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceTcpPortEnd
OBJECT-TYPE
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.71Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationTcpPort
OBJECT-TYPE
Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.72Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationTcpPortStatus
OBJECT-TYPE
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.73INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationTcpPortEnd
OBJECT-TYPE
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.74Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceUdpPort
OBJECT-TYPE
Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.75Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceUdpPortStatus
OBJECT-TYPE
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.76INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceUdpPortEnd
OBJECT-TYPE
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.77Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationUdpPort
OBJECT-TYPE
Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.78Integer32 (0..65535)read-createcurrent
alaQoSConditionDestinationUdpPortStatus
OBJECT-TYPE
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.79INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationUdpPortEnd
OBJECT-TYPE
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.80Integer32 (0..65535)read-createcurrent
alaQoSConditionEthertype
OBJECT-TYPE
Ethertype value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.81Integer32 (0..65535)read-createcurrent
alaQoSConditionEthertypeStatus
OBJECT-TYPE
Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.82INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTcpFlags
OBJECT-TYPE
Use any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.83INTEGER {all(1), any(2)}read-createcurrent
alaQoSConditionTcpFlagsStatus
OBJECT-TYPE
Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.84INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTcpFlagsVal
OBJECT-TYPE
TCP flags values used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.85Integer32read-createcurrent
alaQoSConditionTcpFlagsValStatus
OBJECT-TYPE
Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.86INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTcpFlagsMask
OBJECT-TYPE
Mask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.87Integer32read-createcurrent
alaQoSConditionTcpFlagsMaskStatus
OBJECT-TYPE
Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.88INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionTcpEstablished
OBJECT-TYPE
Look for established TCP sessions in classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.89INTEGER {yes(1), no(2)}read-createcurrent
alaQoSConditionSourceIpv6Addr
OBJECT-TYPE
Source IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.90Ipv6Addressread-createcurrent
alaQoSConditionSourceIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.91INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceIpv6Mask
OBJECT-TYPE
Source IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.92Ipv6Addressread-createcurrent
alaQoSConditionDestinationIpv6Addr
OBJECT-TYPE
Destination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.93Ipv6Addressread-createcurrent
alaQoSConditionDestinationIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.94INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDestinationIpv6Mask
OBJECT-TYPE
Destination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.95Ipv6Addressread-createcurrent
alaQoSConditionIpv6Traffic
OBJECT-TYPE
classify IPV6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.96INTEGER {yes(1), no(2)}read-createcurrent
alaQoSConditionIpv6NH
OBJECT-TYPE
NH value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.97Integer32 (0..255)read-createcurrent
alaQoSConditionIpv6NHStatus
OBJECT-TYPE
Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.98INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionIpv6FlowLabel
OBJECT-TYPE
FL value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.99Integer32 (0..1048575)read-createcurrent
alaQoSConditionIpv6FlowLabelStatus
OBJECT-TYPE
Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.100INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionMcastIpv6Addr
OBJECT-TYPE
Multicast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.101Ipv6Addressread-createcurrent
alaQoSConditionMcastIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.102INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionMcastIpv6Mask
OBJECT-TYPE
Multicast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.103Ipv6Addressread-createcurrent
alaQoSConditionDscpEnd
OBJECT-TYPE
DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.104Integer32 (0..63)read-createcurrent
alaQoSConditionInnerSourceVlan
OBJECT-TYPE
Customer VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.105Integer32 (0..4095)read-createcurrent
alaQoSConditionInnerSourceVlanStatus
OBJECT-TYPE
Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.106INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionInner8021p
OBJECT-TYPE
Customer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.107Integer32 (0..7)read-createcurrent
alaQoSConditionInner8021pStatus
OBJECT-TYPE
Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.108INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVrfName
OBJECT-TYPE
Name of Vrf to match traffic in
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.109SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSConditionVrfNameStatus
OBJECT-TYPE
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.110INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionFragments
OBJECT-TYPE
TCP packet fragments
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.111INTEGER {yes(1), no(2)}read-createcurrent
alaQoSConditionSourceChassis
OBJECT-TYPE
Source physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.112Integer32 (0..16)read-createcurrent
alaQoSConditionDestinationChassis
OBJECT-TYPE
Destination physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.113Integer32 (0..16)read-createcurrent
alaQoSConditionAppFpGroup
OBJECT-TYPE
Application Fingerprinting group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.114SnmpAdminString (SIZE(1..24))read-createcurrent
alaQoSConditionAppFpGroupStatus
OBJECT-TYPE
Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.115INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSIP
OBJECT-TYPE
SIP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.116INTEGER {audio(1), video(2), other(3)}read-createcurrent
alaQoSConditionSIPStatus
OBJECT-TYPE
SIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.117INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDPIAppName
OBJECT-TYPE
DPI Application Name associated with a policy condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.118SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSConditionDPIGrpName
OBJECT-TYPE
DPI Group Name associated with a policy condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.119SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSConditionDPIAppNameStatus
OBJECT-TYPE
DPI Status field indicates whether DPI Application Name is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.120INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionDPIAppGroupStatus
OBJECT-TYPE
DPI Status field indicates whether DPI Application Group is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.121INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVxlanVni
OBJECT-TYPE
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.122Integer32 (0..16777215)read-createcurrent
alaQoSConditionVxlanVniStatus
OBJECT-TYPE
Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.123INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVxlanPort
OBJECT-TYPE
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.124Integer32 (0..65535)read-createcurrent
alaQoSConditionVxlanPortStatus
OBJECT-TYPE
Status field indicating whether the VXLAN Port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.125INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVmSourceMacAddr
OBJECT-TYPE
Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.126MacAddressread-createcurrent
alaQoSConditionVmSourceMacAddrStatus
OBJECT-TYPE
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.127INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVmSourceMacMask
OBJECT-TYPE
Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.128MacAddressread-createcurrent
alaQoSConditionVmSourceIpAddr
OBJECT-TYPE
Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.129IpAddressread-createcurrent
alaQoSConditionVmSourceIpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.130INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVmSourceIpMask
OBJECT-TYPE
Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.131IpAddressread-createcurrent
alaQoSConditionVmSourceIpv6IpAddr
OBJECT-TYPE
Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.132Ipv6Addressread-createcurrent
alaQoSConditionVmSourceIpv6IpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.133INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionVmSourceIpv6IpMask
OBJECT-TYPE
Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.134Ipv6Addressread-createcurrent
alaQoSConditionVmIpProtocol
OBJECT-TYPE
IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.135Integer32 (0..255)read-createcurrent
alaQoSConditionVmIpProtocolStatus
OBJECT-TYPE
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.136INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosConditionVmL4SourcePort
OBJECT-TYPE
Source IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.137Integer32 (0..65535)read-createcurrent
alaQosConditionVmL4SourcePortStatus
OBJECT-TYPE
Status field indicating whether the source IP port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.138INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosConditionVmL4DestPort
OBJECT-TYPE
Destination IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.139Integer32 (0..65535)read-createcurrent
alaQosConditionVmL4DestPortStatus
OBJECT-TYPE
Status field indicating whether the destination port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.140INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosConditionVxlanStatus
OBJECT-TYPE
Status field indicating vxlan configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.141INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourcePortSplitGroup
OBJECT-TYPE
Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.142SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionSourcePortSplitGroupStatus
OBJECT-TYPE
Status field indicating whether the source physical port splitGroup needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.143INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceVlanGroup
OBJECT-TYPE
Source physical vlan group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.144SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSConditionSourceVlanGroupStatus
OBJECT-TYPE
Status field indicating whether the source physical vlan group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.145INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConditionSourceServiceID
OBJECT-TYPE
Source service ID.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.146Integer32 (0..65535)read-createcurrent
alaQoSConditionSourceServiceIDStatus
OBJECT-TYPE
Enable/disable source service ID.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.147INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionTable
OBJECT-TYPE
Table of QoS AppliedCondition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4not-accessiblecurrent
alaQoSAppliedConditionEntry
OBJECT-TYPE
Definition of QoS AppliedCondition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1not-accessiblecurrent
alaQoSAppliedConditionName
OBJECT-TYPE
Name of condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedConditionSource
OBJECT-TYPE
What entity created the condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedConditionSourceSlot
OBJECT-TYPE
Source physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3Integer32 (0..16)read-onlycurrent
alaQoSAppliedConditionSourceSlotStatus
OBJECT-TYPE
Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourcePort
OBJECT-TYPE
Source physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5Integer32 (1..128)read-onlycurrent
alaQoSAppliedConditionSourcePortGroup
OBJECT-TYPE
Source physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionSourcePortGroupStatus
OBJECT-TYPE
Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationSlot
OBJECT-TYPE
Destination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8Integer32 (0..16)read-onlycurrent
alaQoSAppliedConditionDestinationSlotStatus
OBJECT-TYPE
Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationPort
OBJECT-TYPE
Destination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10Integer32 (1..128)read-onlycurrent
alaQoSAppliedConditionDestinationPortGroup
OBJECT-TYPE
Destination physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionDestinationPortGroupStatus
OBJECT-TYPE
Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceMacAddr
OBJECT-TYPE
Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13MacAddressread-onlycurrent
alaQoSAppliedConditionSourceMacAddrStatus
OBJECT-TYPE
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceMacMask
OBJECT-TYPE
Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15MacAddressread-onlycurrent
alaQoSAppliedConditionSourceMacGroup
OBJECT-TYPE
Source MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionSourceMacGroupStatus
OBJECT-TYPE
Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationMacAddr
OBJECT-TYPE
Destination MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18MacAddressread-onlycurrent
alaQoSAppliedConditionDestinationMacAddrStatus
OBJECT-TYPE
Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationMacMask
OBJECT-TYPE
Destination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20MacAddressread-onlycurrent
alaQoSAppliedConditionDestinationMacGroup
OBJECT-TYPE
Destination MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionDestinationMacGroupStatus
OBJECT-TYPE
Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceVlan
OBJECT-TYPE
Source VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23Integer32 (0..4095)read-onlycurrent
alaQoSAppliedConditionSourceVlanStatus
OBJECT-TYPE
Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationVlan
OBJECT-TYPE
Destination VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25Integer32 (0..4095)read-onlycurrent
alaQoSAppliedConditionDestinationVlanStatus
OBJECT-TYPE
Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedCondition8021p
OBJECT-TYPE
802.1p value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27Integer32 (0..7)read-onlycurrent
alaQoSAppliedCondition8021pStatus
OBJECT-TYPE
Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceIpAddr
OBJECT-TYPE
Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29IpAddressread-onlycurrent
alaQoSAppliedConditionSourceIpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceIpMask
OBJECT-TYPE
Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31IpAddressread-onlycurrent
alaQoSAppliedConditionSourceNetworkGroup
OBJECT-TYPE
Source network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionSourceNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationIpAddr
OBJECT-TYPE
Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34IpAddressread-onlycurrent
alaQoSAppliedConditionDestinationIpAddrStatus
OBJECT-TYPE
Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationIpMask
OBJECT-TYPE
Destination IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36IpAddressread-onlycurrent
alaQoSAppliedConditionDestinationNetworkGroup
OBJECT-TYPE
Destination network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionDestinationNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionMulticastIpAddr
OBJECT-TYPE
Multicast IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39IpAddressread-onlycurrent
alaQoSAppliedConditionMulticastIpAddrStatus
OBJECT-TYPE
Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionMulticastIpMask
OBJECT-TYPE
Multicast IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41IpAddressread-onlycurrent
alaQoSAppliedConditionMulticastNetworkGroup
OBJECT-TYPE
Multicast network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionMulticastNetworkGroupStatus
OBJECT-TYPE
Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTos
OBJECT-TYPE
TOS value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44Integer32 (0..7)read-onlycurrent
alaQoSAppliedConditionTosStatus
OBJECT-TYPE
Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTosMask
OBJECT-TYPE
TOS mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46Integer32 (0..7)read-onlycurrent
alaQoSAppliedConditionDscp
OBJECT-TYPE
DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47Integer32 (0..63)read-onlycurrent
alaQoSAppliedConditionDscpStatus
OBJECT-TYPE
Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDscpMask
OBJECT-TYPE
DSCP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49Integer32 (0..63)read-onlycurrent
alaQoSAppliedConditionIpProtocol
OBJECT-TYPE
IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50Integer32 (0..255)read-onlycurrent
alaQoSAppliedConditionIpProtocolStatus
OBJECT-TYPE
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceIpPort
OBJECT-TYPE
Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionSourceIpPortStatus
OBJECT-TYPE
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationIpPort
OBJECT-TYPE
Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationIpPortStatus
OBJECT-TYPE
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionService
OBJECT-TYPE
Name of service to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionServiceStatus
OBJECT-TYPE
Status field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionServiceGroup
OBJECT-TYPE
Name of service group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionServiceGroupStatus
OBJECT-TYPE
Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionIcmpType
OBJECT-TYPE
ICMP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60Integer32 (0..255)read-onlycurrent
alaQoSAppliedConditionIcmpTypeStatus
OBJECT-TYPE
Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionIcmpCode
OBJECT-TYPE
ICMP code to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62Integer32 (0..255)read-onlycurrent
alaQoSAppliedConditionIcmpCodeStatus
OBJECT-TYPE
Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionRowStatus
OBJECT-TYPE
Used to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64RowStatusread-createcurrent
alaQoSAppliedConditionSourcePortEnd
OBJECT-TYPE
Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65Integer32 (1..128)read-onlycurrent
alaQoSAppliedConditionDestinationPortEnd
OBJECT-TYPE
Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66Integer32 (1..128)read-onlycurrent
alaQoSAppliedConditionSourceIpPortEnd
OBJECT-TYPE
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationIpPortEnd
OBJECT-TYPE
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionSourceTcpPort
OBJECT-TYPE
Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionSourceTcpPortStatus
OBJECT-TYPE
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceTcpPortEnd
OBJECT-TYPE
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationTcpPort
OBJECT-TYPE
Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationTcpPortStatus
OBJECT-TYPE
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationTcpPortEnd
OBJECT-TYPE
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionSourceUdpPort
OBJECT-TYPE
Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionSourceUdpPortStatus
OBJECT-TYPE
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceUdpPortEnd
OBJECT-TYPE
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationUdpPort
OBJECT-TYPE
Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionDestinationUdpPortStatus
OBJECT-TYPE
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationUdpPortEnd
OBJECT-TYPE
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionEthertype
OBJECT-TYPE
Ethertype value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81Integer32 (0..65535)read-onlycurrent
alaQoSAppliedConditionEthertypeStatus
OBJECT-TYPE
Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTcpFlags
OBJECT-TYPE
Use any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83INTEGER {all(1), any(2)}read-onlycurrent
alaQoSAppliedConditionTcpFlagsStatus
OBJECT-TYPE
Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTcpFlagsVal
OBJECT-TYPE
TCP flags values used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85Integer32read-onlycurrent
alaQoSAppliedConditionTcpFlagsValStatus
OBJECT-TYPE
Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTcpFlagsMask
OBJECT-TYPE
Mask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87Integer32read-onlycurrent
alaQoSAppliedConditionTcpFlagsMaskStatus
OBJECT-TYPE
Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionTcpEstablished
OBJECT-TYPE
Look for established TCP sessions in classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedConditionSourceIpv6Addr
OBJECT-TYPE
Source IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90Ipv6Addressread-onlycurrent
alaQoSAppliedConditionSourceIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionSourceIpv6Mask
OBJECT-TYPE
Source IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92Ipv6Addressread-onlycurrent
alaQoSAppliedConditionDestinationIpv6Addr
OBJECT-TYPE
Destination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93Ipv6Addressread-onlycurrent
alaQoSAppliedConditionDestinationIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionDestinationIpv6Mask
OBJECT-TYPE
Destination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95Ipv6Addressread-onlycurrent
alaQoSAppliedConditionIpv6Traffic
OBJECT-TYPE
classify IPV6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedConditionIpv6NH
OBJECT-TYPE
NH value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97Integer32 (0..255)read-onlycurrent
alaQoSAppliedConditionIpv6NHStatus
OBJECT-TYPE
Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionIpv6FlowLabel
OBJECT-TYPE
FL value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99Integer32 (0..1048575)read-onlycurrent
alaQoSAppliedConditionIpv6FlowLabelStatus
OBJECT-TYPE
Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionMcastIpv6Addr
OBJECT-TYPE
Multicast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101Ipv6Addressread-createcurrent
alaQoSAppliedConditionMcastIpv6AddrStatus
OBJECT-TYPE
Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionMcastIpv6Mask
OBJECT-TYPE
Multicast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103Ipv6Addressread-createcurrent
alaQoSAppliedConditionDscpEnd
OBJECT-TYPE
DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104Integer32 (0..63)read-onlycurrent
alaQoSAppliedConditionInnerSourceVlan
OBJECT-TYPE
Customer VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105Integer32 (0..4095)read-onlycurrent
alaQoSAppliedConditionInnerSourceVlanStatus
OBJECT-TYPE
Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionInner8021p
OBJECT-TYPE
Customer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107Integer32 (0..7)read-onlycurrent
alaQoSAppliedConditionInner8021pStatus
OBJECT-TYPE
Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedConditionVrfName
OBJECT-TYPE
Name of Vrf to match traffic in
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSAppliedConditionVrfNameStatus
OBJECT-TYPE
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionFragments
OBJECT-TYPE
TCP packet fragments
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedConditionSourceChassis
OBJECT-TYPE
Source physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112Integer32 (0..16)read-onlycurrent
alaQoSAppliedConditionDestinationChassis
OBJECT-TYPE
Destination physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113Integer32 (0..16)read-onlycurrent
alaQoSAppliedConditionAppFpGroup
OBJECT-TYPE
Application Fingerprinting group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114SnmpAdminString (SIZE(1..24))read-createcurrent
alaQoSAppliedConditionAppFpGroupStatus
OBJECT-TYPE
Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionSIP
OBJECT-TYPE
SIP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116INTEGER {audio(1), video(2), other(3)}read-createcurrent
alaQoSAppliedConditionSIPStatus
OBJECT-TYPE
SIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionDPIAppName
OBJECT-TYPE
DPI Application Member.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSAppliedConditionDPIAppGrp
OBJECT-TYPE
DPI Application Member Type.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119SnmpAdminString (SIZE(0..32))read-createcurrent
alaQoSAppliedConditionDPIAppNameStatus
OBJECT-TYPE
DPI Status field indicates whether DPI Application name is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionDPIAppGroupStatus
OBJECT-TYPE
DPI Status field indicates whether DPI Application group is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVxlanVni
OBJECT-TYPE
Vni value associated with this vxlan
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122Integer32read-createcurrent
alaQoSAppliedConditionVxlanVniStatus
OBJECT-TYPE
Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.123INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVxlanPort
OBJECT-TYPE
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.124Integer32read-createcurrent
alaQoSAppliedConditionVxlanPortStatus
OBJECT-TYPE
Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.125INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVmSourceMacAddr
OBJECT-TYPE
Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.126MacAddressread-createcurrent
alaQoSAppliedConditionVmSourceMacAddrStatus
OBJECT-TYPE
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.127INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVmSourceMacMask
OBJECT-TYPE
Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.128MacAddressread-createcurrent
alaQoSAppliedConditionVmSourceIpAddr
OBJECT-TYPE
Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.129IpAddressread-createcurrent
alaQoSAppliedConditionVmSourceIpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.130INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVmSourceIpMask
OBJECT-TYPE
Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.131IpAddressread-createcurrent
alaQoSAppliedConditionVmSourceIpv6IpAddr
OBJECT-TYPE
Source IPV6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.132Ipv6Addressread-createcurrent
alaQoSAppliedConditionVmSourceIpv6IpAddrStatus
OBJECT-TYPE
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.133INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionVmSourceIpv6IpMask
OBJECT-TYPE
Source IPV6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.134Ipv6Addressread-createcurrent
alaQoSAppliedConditionVmIpProtocol
OBJECT-TYPE
IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.135Integer32 (0..255)read-createcurrent
alaQoSAppliedConditionVmIpProtocolStatus
OBJECT-TYPE
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.136INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosAppliedConditionVmL4SourcePort
OBJECT-TYPE
Source IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.137Integer32 (0..65535)read-createcurrent
alaQosAppliedConditionVmL4SourcePortStatus
OBJECT-TYPE
Status field indicating whether the source port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.138INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosAppliedConditionVmL4DestPort
OBJECT-TYPE
Destination port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.139Integer32 (0..65535)read-createcurrent
alaQosAppliedConditionVmL4DestPortStatus
OBJECT-TYPE
Status field indicating whether the destination port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.140INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQosAppliedConditionVxlanStatus
OBJECT-TYPE
Status field indicating vxlan configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.141INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedConditionSourcePortSplitGroup
OBJECT-TYPE
Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.142SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedConditionSourcePortSplitGroupStatus
OBJECT-TYPE
Status field indicating whether the source physical port splitGroup needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.143INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSServiceTable
OBJECT-TYPE
Table of QoS Service definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5not-accessiblecurrent
alaQoSServiceEntry
OBJECT-TYPE
Definition of QoS Service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1not-accessiblecurrent
alaQoSServiceName
OBJECT-TYPE
Name of the service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSServiceSource
OBJECT-TYPE
What entity created the service.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSServiceProtocol
OBJECT-TYPE
protocol field for Service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.3Integer32 (0..255)read-createcurrent
alaQoSServiceSourceIpPort
OBJECT-TYPE
Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.4Integer32 (0..65535)read-createcurrent
alaQoSServiceSourceIpPortStatus
OBJECT-TYPE
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceDestinationIpPort
OBJECT-TYPE
Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.6Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationIpPortStatus
OBJECT-TYPE
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceRowStatus
OBJECT-TYPE
Used to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.8RowStatusread-createcurrent
alaQoSServiceSourceIpPortEnd
OBJECT-TYPE
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.9Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationIpPortEnd
OBJECT-TYPE
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.10Integer32 (0..65535)read-createcurrent
alaQoSServiceSourceTcpPort
OBJECT-TYPE
Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.11Integer32 (0..65535)read-createcurrent
alaQoSServiceSourceTcpPortStatus
OBJECT-TYPE
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceSourceTcpPortEnd
OBJECT-TYPE
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.13Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationTcpPort
OBJECT-TYPE
Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.14Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationTcpPortStatus
OBJECT-TYPE
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.15INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceDestinationTcpPortEnd
OBJECT-TYPE
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.16Integer32 (0..65535)read-createcurrent
alaQoSServiceSourceUdpPort
OBJECT-TYPE
Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.17Integer32 (0..65535)read-createcurrent
alaQoSServiceSourceUdpPortStatus
OBJECT-TYPE
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceSourceUdpPortEnd
OBJECT-TYPE
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.19Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationUdpPort
OBJECT-TYPE
Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.20Integer32 (0..65535)read-createcurrent
alaQoSServiceDestinationUdpPortStatus
OBJECT-TYPE
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.21INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSServiceDestinationUdpPortEnd
OBJECT-TYPE
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.22Integer32 (0..65535)read-createcurrent
alaQoSAppliedServiceTable
OBJECT-TYPE
Table of QoS AppliedService definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6not-accessiblecurrent
alaQoSAppliedServiceEntry
OBJECT-TYPE
Definition of QoS AppliedService
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1not-accessiblecurrent
alaQoSAppliedServiceName
OBJECT-TYPE
Name of the service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedServiceSource
OBJECT-TYPE
What entity created the service.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedServiceProtocol
OBJECT-TYPE
protocol field for AppliedService
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.3Integer32 (0..255)read-onlycurrent
alaQoSAppliedServiceSourceIpPort
OBJECT-TYPE
Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.4Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceSourceIpPortStatus
OBJECT-TYPE
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceDestinationIpPort
OBJECT-TYPE
Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.6Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationIpPortStatus
OBJECT-TYPE
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceRowStatus
OBJECT-TYPE
Used to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.8RowStatusread-createcurrent
alaQoSAppliedServiceSourceIpPortEnd
OBJECT-TYPE
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.9Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationIpPortEnd
OBJECT-TYPE
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.10Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceSourceTcpPort
OBJECT-TYPE
Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.11Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceSourceTcpPortStatus
OBJECT-TYPE
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceSourceTcpPortEnd
OBJECT-TYPE
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.13Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationTcpPort
OBJECT-TYPE
Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.14Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationTcpPortStatus
OBJECT-TYPE
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceDestinationTcpPortEnd
OBJECT-TYPE
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.16Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceSourceUdpPort
OBJECT-TYPE
Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.17Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceSourceUdpPortStatus
OBJECT-TYPE
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.18INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceSourceUdpPortEnd
OBJECT-TYPE
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.19Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationUdpPort
OBJECT-TYPE
Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.20Integer32 (0..65535)read-onlycurrent
alaQoSAppliedServiceDestinationUdpPortStatus
OBJECT-TYPE
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.21INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedServiceDestinationUdpPortEnd
OBJECT-TYPE
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.22Integer32 (0..65535)read-onlycurrent
alaQoSServiceGroupsTable
OBJECT-TYPE
Table of QoS ServiceGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7not-accessiblecurrent
alaQoSServiceGroupsEntry
OBJECT-TYPE
Definition of QoS ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1not-accessiblecurrent
alaQoSServiceGroupsName
OBJECT-TYPE
Name of service group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSServiceGroupsSource
OBJECT-TYPE
What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSServiceGroupsStatus
OBJECT-TYPE
Used to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.3RowStatusread-createcurrent
alaQoSAppliedServiceGroupsTable
OBJECT-TYPE
Table of QoS AppliedServiceGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8not-accessiblecurrent
alaQoSAppliedServiceGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1not-accessiblecurrent
alaQoSAppliedServiceGroupsName
OBJECT-TYPE
Name of service group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedServiceGroupsSource
OBJECT-TYPE
What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedServiceGroupsStatus
OBJECT-TYPE
Used to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.3RowStatusread-createcurrent
alaQoSServiceGroupTable
OBJECT-TYPE
Table of QoS ServiceGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9not-accessiblecurrent
alaQoSServiceGroupEntry
OBJECT-TYPE
Definition of QoS ServiceGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1not-accessiblecurrent
alaQoSServiceGroupServiceName
OBJECT-TYPE
Name of service in service group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSServiceGroupStatus
OBJECT-TYPE
Used to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.2RowStatusread-createcurrent
alaQoSAppliedServiceGroupTable
OBJECT-TYPE
Table of QoS AppliedServiceGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10not-accessiblecurrent
alaQoSAppliedServiceGroupEntry
OBJECT-TYPE
Definition of QoS AppliedServiceGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1not-accessiblecurrent
alaQoSAppliedServiceGroupServiceName
OBJECT-TYPE
Name of service in service group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedServiceGroupStatus
OBJECT-TYPE
Used to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.2RowStatusread-createcurrent
alaQoSNetworkGroupsTable
OBJECT-TYPE
Table of QoS NetworkGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11not-accessiblecurrent
alaQoSNetworkGroupsEntry
OBJECT-TYPE
Definition of QoS NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1not-accessiblecurrent
alaQoSNetworkGroupsName
OBJECT-TYPE
Name of network group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSNetworkGroupsSource
OBJECT-TYPE
What entity created the network group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSNetworkGroupsStatus
OBJECT-TYPE
Used to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.3RowStatusread-createcurrent
alaQoSAppliedNetworkGroupsTable
OBJECT-TYPE
Table of QoS AppliedNetworkGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12not-accessiblecurrent
alaQoSAppliedNetworkGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedNetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1not-accessiblecurrent
alaQoSAppliedNetworkGroupsName
OBJECT-TYPE
Name of network group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedNetworkGroupsSource
OBJECT-TYPE
What entity created the network group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedNetworkGroupsStatus
OBJECT-TYPE
Used to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.3RowStatusread-createcurrent
alaQoSNetworkGroupTable
OBJECT-TYPE
Table of QoS NetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13not-accessiblecurrent
alaQoSNetworkGroupEntry
OBJECT-TYPE
Definition of QoS NetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1not-accessiblecurrent
alaQoSNetworkGroupIpAddr
OBJECT-TYPE
IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.1IpAddressnot-accessiblecurrent
alaQoSNetworkGroupIpMask
OBJECT-TYPE
IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.2IpAddressnot-accessiblecurrent
alaQoSNetworkGroupStatus
OBJECT-TYPE
Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.3RowStatusread-createcurrent
alaQoSAppliedNetworkGroupTable
OBJECT-TYPE
Table of QoS AppliedNetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14not-accessiblecurrent
alaQoSAppliedNetworkGroupEntry
OBJECT-TYPE
Definition of QoS AppliedNetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1not-accessiblecurrent
alaQoSAppliedNetworkGroupIpAddr
OBJECT-TYPE
IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.1IpAddressnot-accessiblecurrent
alaQoSAppliedNetworkGroupIpMask
OBJECT-TYPE
IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.2IpAddressnot-accessiblecurrent
alaQoSAppliedNetworkGroupStatus
OBJECT-TYPE
Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.3RowStatusread-createcurrent
alaQoSMACGroupsTable
OBJECT-TYPE
Table of QoS MACGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15not-accessiblecurrent
alaQoSMACGroupsEntry
OBJECT-TYPE
Definition of QoS MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1not-accessiblecurrent
alaQoSMACGroupsName
OBJECT-TYPE
Name of MAC group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSMACGroupsSource
OBJECT-TYPE
What entity created the MAC group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSMACGroupsStatus
OBJECT-TYPE
Used to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.3RowStatusread-createcurrent
alaQoSAppliedMACGroupsTable
OBJECT-TYPE
Table of QoS AppliedMACGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16not-accessiblecurrent
alaQoSAppliedMACGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedMACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1not-accessiblecurrent
alaQoSAppliedMACGroupsName
OBJECT-TYPE
Name of MAC group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedMACGroupsSource
OBJECT-TYPE
What entity created the MAC group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedMACGroupsStatus
OBJECT-TYPE
Used to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.3RowStatusread-createcurrent
alaQoSMACGroupTable
OBJECT-TYPE
Table of QoS MACGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17not-accessiblecurrent
alaQoSMACGroupEntry
OBJECT-TYPE
Definition of QoS MACGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1not-accessiblecurrent
alaQoSMACGroupMacAddr
OBJECT-TYPE
MAC address for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.1MacAddressnot-accessiblecurrent
alaQoSMACGroupMacMask
OBJECT-TYPE
MAC mask for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.2MacAddressnot-accessiblecurrent
alaQoSMACGroupStatus
OBJECT-TYPE
Used to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.3RowStatusread-createcurrent
alaQoSAppliedMACGroupTable
OBJECT-TYPE
Table of QoS AppliedMACGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18not-accessiblecurrent
alaQoSAppliedMACGroupEntry
OBJECT-TYPE
Definition of QoS AppliedMACGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1not-accessiblecurrent
alaQoSAppliedMACGroupMacAddr
OBJECT-TYPE
MAC address for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.1MacAddressnot-accessiblecurrent
alaQoSAppliedMACGroupMacMask
OBJECT-TYPE
MAC mask for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.2MacAddressnot-accessiblecurrent
alaQoSAppliedMACGroupStatus
OBJECT-TYPE
Used to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.3RowStatusread-createcurrent
alaQoSPortGroupsTable
OBJECT-TYPE
Table of QoS PortGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19not-accessiblecurrent
alaQoSPortGroupsEntry
OBJECT-TYPE
Definition of QoS PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1not-accessiblecurrent
alaQoSPortGroupsName
OBJECT-TYPE
Name of port group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSPortGroupsSource
OBJECT-TYPE
What entity created the port group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSPortGroupsStatus
OBJECT-TYPE
Used to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.3RowStatusread-createcurrent
alaQoSAppliedPortGroupsTable
OBJECT-TYPE
Table of QoS AppliedPortGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20not-accessiblecurrent
alaQoSAppliedPortGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedPortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1not-accessiblecurrent
alaQoSAppliedPortGroupsName
OBJECT-TYPE
Name of port group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedPortGroupsSource
OBJECT-TYPE
What entity created the port group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedPortGroupsStatus
OBJECT-TYPE
Used to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.3RowStatusread-createcurrent
alaQoSPortGroupTable
OBJECT-TYPE
Table of QoS PortGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21not-accessiblecurrent
alaQoSPortGroupEntry
OBJECT-TYPE
Definition of QoS PortGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1not-accessiblecurrent
alaQoSPortGroupSlot
OBJECT-TYPE
Physical slot for port group entry. If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.1Integer32 (0..6016)not-accessiblecurrent
alaQoSPortGroupPort
OBJECT-TYPE
Physical port range start for port group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.2Integer32 (0..255)not-accessiblecurrent
alaQoSPortGroupStatus
OBJECT-TYPE
Used to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.3RowStatusread-createcurrent
alaQoSPortGroupPortEnd
OBJECT-TYPE
Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.4Integer32 (0..255)not-accessiblecurrent
alaQoSAppliedPortGroupTable
OBJECT-TYPE
Table of QoS AppliedPortGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22not-accessiblecurrent
alaQoSAppliedPortGroupEntry
OBJECT-TYPE
Definition of QoS AppliedPortGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1not-accessiblecurrent
alaQoSAppliedPortGroupSlot
OBJECT-TYPE
Physical slot for port group entry If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.1Integer32 (1..6016)not-accessiblecurrent
alaQoSAppliedPortGroupPort
OBJECT-TYPE
Physical port range start for port group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.2Integer32 (1..128)not-accessiblecurrent
alaQoSAppliedPortGroupStatus
OBJECT-TYPE
Used to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.3RowStatusread-createcurrent
alaQoSAppliedPortGroupPortEnd
OBJECT-TYPE
Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.4Integer32 (0..128)not-accessiblecurrent
alaQoSMapGroupsTable
OBJECT-TYPE
Table of QoS MapGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23not-accessiblecurrent
alaQoSMapGroupsEntry
OBJECT-TYPE
Definition of QoS MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1not-accessiblecurrent
alaQoSMapGroupsName
OBJECT-TYPE
Name of map group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSMapGroupsSource
OBJECT-TYPE
What entity created the map group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSMapGroupsStatus
OBJECT-TYPE
Used to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.3RowStatusread-createcurrent
alaQoSAppliedMapGroupsTable
OBJECT-TYPE
Table of QoS AppliedMapGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24not-accessiblecurrent
alaQoSAppliedMapGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedMapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1not-accessiblecurrent
alaQoSAppliedMapGroupsName
OBJECT-TYPE
Name of map group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedMapGroupsSource
OBJECT-TYPE
What entity created the map group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedMapGroupsStatus
OBJECT-TYPE
Used to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.3RowStatusread-createcurrent
alaQoSMapGroupTable
OBJECT-TYPE
Table of QoS MapGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25not-accessiblecurrent
alaQoSMapGroupEntry
OBJECT-TYPE
Definition of QoS MapGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1not-accessiblecurrent
alaQoSMapGroupKey
OBJECT-TYPE
Key range start of map group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.1Integer32 (0..63)not-accessiblecurrent
alaQoSMapGroupKeyEnd
OBJECT-TYPE
Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.2Integer32 (0..63)not-accessiblecurrent
alaQoSMapGroupValue
OBJECT-TYPE
Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.3Integer32 (0..63)not-accessiblecurrent
alaQoSMapGroupStatus
OBJECT-TYPE
Used to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.4RowStatusread-createcurrent
alaQoSAppliedMapGroupTable
OBJECT-TYPE
Table of QoS AppliedMapGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26not-accessiblecurrent
alaQoSAppliedMapGroupEntry
OBJECT-TYPE
Definition of QoS AppliedMapGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1not-accessiblecurrent
alaQoSAppliedMapGroupKey
OBJECT-TYPE
Key range start of map group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.1Integer32 (0..63)not-accessiblecurrent
alaQoSAppliedMapGroupKeyEnd
OBJECT-TYPE
Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.2Integer32 (0..63)not-accessiblecurrent
alaQoSAppliedMapGroupValue
OBJECT-TYPE
Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.3Integer32 (0..63)not-accessiblecurrent
alaQoSAppliedMapGroupStatus
OBJECT-TYPE
Used to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.4RowStatusread-createcurrent
alaQoSActionTable
OBJECT-TYPE
Table of QoS Action definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27not-accessiblecurrent
alaQoSActionEntry
OBJECT-TYPE
Definition of QoS Action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1not-accessiblecurrent
alaQoSActionName
OBJECT-TYPE
Name of action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSActionSource
OBJECT-TYPE
What entity created the action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSActionDisposition
OBJECT-TYPE
Disposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.3INTEGER {accept(1), drop(2), deny(3)}read-createcurrent
alaQoSActionMaximumBandwidth
OBJECT-TYPE
Maximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.4Integer32read-createcurrent
alaQoSActionMaximumBandwidthStatus
OBJECT-TYPE
Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionPriority
OBJECT-TYPE
Internal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.6Integer32 (0..12)read-createcurrent
alaQoSActionPriorityStatus
OBJECT-TYPE
Status field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionShared
OBJECT-TYPE
When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.8INTEGER {yes(1), no(2)}read-createcurrent
alaQoSActionMaximumDepth
OBJECT-TYPE
Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.9Integer32read-createcurrent
alaQoSActionMaximumDepthStatus
OBJECT-TYPE
Status field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAction8021p
OBJECT-TYPE
802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.11Integer32 (0..7)read-createcurrent
alaQoSAction8021pStatus
OBJECT-TYPE
Status field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.12INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionTos
OBJECT-TYPE
TOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.13Integer32 (0..7)read-createcurrent
alaQoSActionTosStatus
OBJECT-TYPE
Status field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionDscp
OBJECT-TYPE
TOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.15Integer32 (0..63)read-createcurrent
alaQoSActionDscpStatus
OBJECT-TYPE
Status field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionMapFrom
OBJECT-TYPE
What field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.17INTEGER {b8021p(1), tos(2), dscp(3)}read-createcurrent
alaQoSActionMapTo
OBJECT-TYPE
What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.18INTEGER {b8021p(1), tos(2), dscp(3)}read-createcurrent
alaQoSActionMapGroup
OBJECT-TYPE
Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.19SnmpAdminString (SIZE(0..31))read-createcurrent
alaQoSActionMapGroupStatus
OBJECT-TYPE
Status field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionLoadBalanceGroup
OBJECT-TYPE
Name of load balance group to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.21SnmpAdminString (SIZE(0..23))read-createcurrent
alaQoSActionLoadBalanceGroupStatus
OBJECT-TYPE
Status field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.22INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionPermanentGatewayIpAddr
OBJECT-TYPE
Next hop gateway to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.23IpAddressread-createcurrent
alaQoSActionPermanentGatewayIpAddrStatus
OBJECT-TYPE
Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.24INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionAlternateGatewayIpAddr
OBJECT-TYPE
Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.25IpAddressread-createcurrent
alaQoSActionAlternateGatewayIpAddrStatus
OBJECT-TYPE
Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.26INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionRowStatus
OBJECT-TYPE
Used to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.27RowStatusread-createcurrent
alaQoSActionNocache
OBJECT-TYPE
When enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.28INTEGER {yes(1), no(2)}read-createcurrent
alaQoSActionPortdisable
OBJECT-TYPE
When enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.29INTEGER {yes(1), no(2)}read-createcurrent
alaQoSActionRedirectSlot
OBJECT-TYPE
Destination physical slot for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.30Integer32 (0..16)read-createcurrent
alaQoSActionRedirectSlotStatus
OBJECT-TYPE
Status for alaQoSActionRedirectSlotStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.31INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionRedirectPort
OBJECT-TYPE
Destination physical port for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.32Integer32 (1..128)read-createcurrent
alaQoSActionRedirectAgg
OBJECT-TYPE
Destination linkagg for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.33Integer32 (0..128)read-createcurrent
alaQoSActionRedirectAggStatus
OBJECT-TYPE
Status for alaQoSActionRedirectAggStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.34INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionMirrorSlot
OBJECT-TYPE
Destination physical slot for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.35Integer32 (0..16)read-createcurrent
alaQoSActionMirrorPort
OBJECT-TYPE
Destination physical port for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.36Integer32 (1..128)read-createcurrent
alaQoSActionMirrorMode
OBJECT-TYPE
Mirroring mode
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.37INTEGER {ingress(1), egress(2), both(3)}read-createcurrent
alaQoSActionMirrorModeStatus
OBJECT-TYPE
Status for alaQoSActionMirrorMode field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.38INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionCIR
OBJECT-TYPE
Committed Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.39Integer32read-createcurrent
alaQoSActionCIRStatus
OBJECT-TYPE
Status field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionCBS
OBJECT-TYPE
Committed Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.41Integer32 (0..2147450880)read-createcurrent
alaQoSActionCBSStatus
OBJECT-TYPE
Status field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.42INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionPIR
OBJECT-TYPE
Peak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.43Integer32read-createcurrent
alaQoSActionPIRStatus
OBJECT-TYPE
Status field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.44INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionPBS
OBJECT-TYPE
Peak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.45Integer32 (0..2147450880)read-createcurrent
alaQoSActionPBSStatus
OBJECT-TYPE
Status field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.46INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionCPUPriority
OBJECT-TYPE
Priority for CPU messages.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.47Integer32 (0..7)read-createcurrent
alaQoSActionCPUPriorityStatus
OBJECT-TYPE
Status field indicating whether CPU Priority value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.48INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionColorOnly
OBJECT-TYPE
only color red traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.49INTEGER {yes(1), no(2)}read-createcurrent
alaQoSActionRedirectChassis
OBJECT-TYPE
Destination physical chassis for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.50Integer32 (0..16)read-createcurrent
alaQoSActionMirrorChassis
OBJECT-TYPE
Destination physical chassis for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.51Integer32 (0..16)read-createcurrent
alaQoSActionPermanentGatewayIpV6Addr
OBJECT-TYPE
Next hop gateway to use for IPv6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.52Ipv6Addressread-createcurrent
alaQoSActionPermanentGatewayIpV6AddrStatus
OBJECT-TYPE
Status field indicating whether permanent gateway IPv6 address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.53INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionPermanentGatewayIpV6IfIndex
OBJECT-TYPE
Ipv6IfIndex for link-local address, else 0.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.54Ipv6IfIndexOrZeroread-createcurrent
alaQoSActionRTCPMonitor
OBJECT-TYPE
RTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.55INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSActionRTCPMonitorStatus
OBJECT-TYPE
Status of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.56INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionRTCPDSCP
OBJECT-TYPE
RTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.57Integer32read-createcurrent
alaQoSActionRTCPDSCPStatus
OBJECT-TYPE
Status of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.58INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionTrustDSCP
OBJECT-TYPE
Trust DSCP status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.59INTEGER {yes(1), no(2)}read-createcurrent
alaQoSActionTrustDSCPStatus
OBJECT-TYPE
Status of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.60INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSActionRedirectModule
OBJECT-TYPE
Object to configure action on HTTP port for Access-Guardian Restricted Role configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.61INTEGER {none(0), qmr(1), captivePortal(2), unauthorized(3), byod(4)}read-createcurrent
alaQoSActionMirrorSession
OBJECT-TYPE
Identifies a specific port mirroring instance.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.62Integer32 (1..2147483647)read-onlycurrent
alaQoSAppliedActionTable
OBJECT-TYPE
Table of QoS AppliedAction definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28not-accessiblecurrent
alaQoSAppliedActionEntry
OBJECT-TYPE
Definition of QoS AppliedAction
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1not-accessiblecurrent
alaQoSAppliedActionName
OBJECT-TYPE
Name of action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedActionSource
OBJECT-TYPE
What entity created the action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedActionDisposition
OBJECT-TYPE
Disposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.3INTEGER {accept(1), drop(2), deny(3)}read-onlycurrent
alaQoSAppliedActionMaximumBandwidth
OBJECT-TYPE
Maximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.4Integer32read-onlycurrent
alaQoSAppliedActionMaximumBandwidthStatus
OBJECT-TYPE
Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionPriority
OBJECT-TYPE
Internal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.6Integer32 (0..12)read-onlycurrent
alaQoSAppliedActionPriorityStatus
OBJECT-TYPE
Status field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionShared
OBJECT-TYPE
When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.8INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedActionMaximumDepth
OBJECT-TYPE
Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.9Integer32read-onlycurrent
alaQoSAppliedActionMaximumDepthStatus
OBJECT-TYPE
Status field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedAction8021p
OBJECT-TYPE
802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.11Integer32 (0..7)read-onlycurrent
alaQoSAppliedAction8021pStatus
OBJECT-TYPE
Status field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionTos
OBJECT-TYPE
TOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.13Integer32 (0..7)read-onlycurrent
alaQoSAppliedActionTosStatus
OBJECT-TYPE
Status field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.14INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionDscp
OBJECT-TYPE
TOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.15Integer32 (0..63)read-onlycurrent
alaQoSAppliedActionDscpStatus
OBJECT-TYPE
Status field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.16INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionMapFrom
OBJECT-TYPE
What field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.17INTEGER {b8021p(1), tos(2), dscp(3)}read-onlycurrent
alaQoSAppliedActionMapTo
OBJECT-TYPE
What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.18INTEGER {b8021p(1), tos(2), dscp(3)}read-onlycurrent
alaQoSAppliedActionMapGroup
OBJECT-TYPE
Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.19SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSAppliedActionMapGroupStatus
OBJECT-TYPE
Status field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.20INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionLoadBalanceGroup
OBJECT-TYPE
Name of load balance group to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.21SnmpAdminString (SIZE(0..23))read-onlycurrent
alaQoSAppliedActionLoadBalanceGroupStatus
OBJECT-TYPE
Status field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.22INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionPermanentGatewayIpAddr
OBJECT-TYPE
Next hop gateway to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.23IpAddressread-onlycurrent
alaQoSAppliedActionPermanentGatewayIpAddrStatus
OBJECT-TYPE
Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.24INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionAlternateGatewayIpAddr
OBJECT-TYPE
Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.25IpAddressread-onlycurrent
alaQoSAppliedActionAlternateGatewayIpAddrStatus
OBJECT-TYPE
Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.26INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionRowStatus
OBJECT-TYPE
Used to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.27RowStatusread-createcurrent
alaQoSAppliedActionNocache
OBJECT-TYPE
When enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.28INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedActionPortdisable
OBJECT-TYPE
When enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.29INTEGER {yes(1), no(2)}read-onlycurrent
alaQoSAppliedActionRedirectSlot
OBJECT-TYPE
Destination physical slot for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.30Integer32 (0..16)read-onlycurrent
alaQoSAppliedActionRedirectSlotStatus
OBJECT-TYPE
Status for alaQoSAppliedActionRedirectSlotStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.31INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionRedirectPort
OBJECT-TYPE
Destination physical port for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.32Integer32 (1..128)read-onlycurrent
alaQoSAppliedActionRedirectAgg
OBJECT-TYPE
Destination linkagg for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.33Integer32 (0..128)read-onlycurrent
alaQoSAppliedActionRedirectAggStatus
OBJECT-TYPE
Status for alaQoSAppliedActionRedirectAggStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.34INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionMirrorSlot
OBJECT-TYPE
Destination physical slot for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.35Integer32 (0..16)read-onlycurrent
alaQoSAppliedActionMirrorPort
OBJECT-TYPE
Destination physical port for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.36Integer32 (1..128)read-onlycurrent
alaQoSAppliedActionMirrorMode
OBJECT-TYPE
Mirroring mode
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.37INTEGER {ingress(1), egress(2), both(3)}read-onlycurrent
alaQoSAppliedActionMirrorModeStatus
OBJECT-TYPE
Status for alaQoSAppliedActionMirrorMode field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.38INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedActionCIR
OBJECT-TYPE
Committed Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.39Integer32read-createcurrent
alaQoSAppliedActionCIRStatus
OBJECT-TYPE
Status field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.40INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionCBS
OBJECT-TYPE
Committed Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.41Integer32 (0..2147450880)read-createcurrent
alaQoSAppliedActionCBSStatus
OBJECT-TYPE
Status field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.42INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionPIR
OBJECT-TYPE
Peak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.43Integer32read-createcurrent
alaQoSAppliedActionPIRStatus
OBJECT-TYPE
Status field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.44INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionPBS
OBJECT-TYPE
Peak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.45Integer32 (0..2147450880)read-createcurrent
alaQoSAppliedActionPBSStatus
OBJECT-TYPE
Status field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.46INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionCPUPriority
OBJECT-TYPE
Priority for CPU messages.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.47Integer32 (0..7)read-createcurrent
alaQoSAppliedActionCPUPriorityStatus
OBJECT-TYPE
Status field indicating whether CPU Priority value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.48INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionColorOnly
OBJECT-TYPE
only color red traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.49INTEGER {yes(1), no(2)}read-createcurrent
alaQoSAppliedActionRedirectChassis
OBJECT-TYPE
Destination physical chassis for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.50Integer32 (0..16)read-onlycurrent
alaQoSAppliedActionMirrorChassis
OBJECT-TYPE
Destination physical chassis for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.51Integer32 (0..16)read-onlycurrent
alaQoSAppliedActionPermanentGatewayIpV6Addr
OBJECT-TYPE
Next hop gateway to use for IPv6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.52Ipv6Addressread-createcurrent
alaQoSAppliedActionPermanentGatewayIpV6AddrStatus
OBJECT-TYPE
Status field indicating whether permanent gateway IPv6 address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.53INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSAppliedActionPermanentGatewayIpV6IfIndex
OBJECT-TYPE
Ipv6IfIndex for link-local address, else 0.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.54Ipv6IfIndexOrZeroread-createcurrent
alaQoSAppliedActionRTCPMonitor
OBJECT-TYPE
RTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.55INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSAppliedActionRTCPMonitorStatus
OBJECT-TYPE
Status of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.56INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSAppliedActionRTCPDSCP
OBJECT-TYPE
RTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.57Integer32read-createcurrent
alaQoSAppliedActionRTCPDSCPStatus
OBJECT-TYPE
Status of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.58INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSAppliedActionTrustDSCP
OBJECT-TYPE
Trust DSCP status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.59INTEGER {yes(1), no(2)}read-createcurrent
alaQoSAppliedActionTrustDSCPStatus
OBJECT-TYPE
Status of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.60INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSAppliedActionMirrorSession
OBJECT-TYPE
Identifies a specific port mirroring instance.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.61Integer32 (1..2147483647)read-onlycurrent
alaQoSPortTable
OBJECT-TYPE
Table of QoS Port definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29not-accessiblecurrent
alaQoSPortEntry
OBJECT-TYPE
Definition of QoS Port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1not-accessiblecurrent
alaQoSPortSlot
OBJECT-TYPE
Physical slot port resides on If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1Integer32 (0..6016)not-accessiblecurrent
alaQoSPortPort
OBJECT-TYPE
Physical port number
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2Integer32 (0..128)not-accessiblecurrent
alaQoSPortInterfaceType
OBJECT-TYPE
The type of interface QoS matches for this physical port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3INTEGER {ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7), ethernet40G(8), ethernet100G(9)}read-onlycurrent
alaQoSPortTrusted
OBJECT-TYPE
Status of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4INTEGER {yes(1), no(2)}read-createcurrent
alaQoSPortDefault8021p
OBJECT-TYPE
802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5Integer32 (0..7)read-createcurrent
alaQoSPortDefaultDSCP
OBJECT-TYPE
DSCP value to stamp in frames arriving on the port when the port is untrusted
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6Integer32 (0..63)read-createcurrent
alaQoSPortMaximumDefaultDepth
OBJECT-TYPE
Maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7Integer32read-createcurrent
alaQoSPortMaximumDefaultDepthStatus
OBJECT-TYPE
Status field indicating whether to enforce maximum depth on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSPortReset
OBJECT-TYPE
Reset all QoS parameters to default values
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9INTEGER {yes(1), no(2)}read-createcurrent
alaQoSPortPhysicalBandwidth
OBJECT-TYPE
Physical bandwidth of port (Kbit/sec)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10Integer32read-onlycurrent
alaQoSPortRowStatus
OBJECT-TYPE
Used to create/delete ports according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11RowStatusread-createcurrent
alaQoSPortDefaultClassification
OBJECT-TYPE
Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12INTEGER {b8021p(1), tos(2), dscp(3)}read-createcurrent
alaQoSPortMaximumBandwidth
OBJECT-TYPE
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13Integer32read-createcurrent
alaQoSPortMaximumBandwidthStatus
OBJECT-TYPE
Status field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSPortMaximumIngBandwidth
OBJECT-TYPE
Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15Integer32read-createcurrent
alaQoSPortMaximumIngBandwidthStatus
OBJECT-TYPE
Status field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSPortMaximumIngressDepth
OBJECT-TYPE
Maximum depth of ingress queues (Kbytes). Maximum depth of queues on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17Integer32 (0..65535)read-createcurrent
alaQoSPortMaximumIngressDepthStatus
OBJECT-TYPE
Status field indicating whether to enforce maximum depth on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSPortDEIMarking
OBJECT-TYPE
This object specifies if, in egress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in egress traffic. disabled(2) -- the DEI/CFI bit will not be set in egress traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSPortDEIMapping
OBJECT-TYPE
This object specifies if, in ingress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingress traffic. disabled(2) -- the DEI/CFI bit will not be set in ingress traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConfig
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30
alaQoSConfigEnabled
OBJECT-TYPE
Is QoS enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.1INTEGER {enable(1), disable(2)}read-writecurrent
alaQoSConfigTrustPorts
OBJECT-TYPE
Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.2INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigStatsInterval
OBJECT-TYPE
Interval in seconds for how often statistics are updated
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.3Integer32 (10..3600)read-writecurrent
alaQoSConfigLogLines
OBJECT-TYPE
Number of log lines to maintain in the QoS log
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.4Integer32 (0..10240)read-writecurrent
alaQoSConfigLogLevel
OBJECT-TYPE
The level of logging desired. The higher the level, the more verbose the logging
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.5Integer32 (2..9)read-writecurrent
alaQoSConfigLogConsole
OBJECT-TYPE
Whether QoS log events are logged to the console
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.6INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigForwardLog
OBJECT-TYPE
Whether QoS forwards logging events to PolicyManager
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.7INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigClearLog
OBJECT-TYPE
Clear the QoS log
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.8INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigApply
OBJECT-TYPE
Set to apply all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.9INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigRevert
OBJECT-TYPE
Set to revert all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.10INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigReset
OBJECT-TYPE
Set to reset global QoS configuration parameters to their default values
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.11INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigStatsReset
OBJECT-TYPE
Set to reset global QoS statistics counters
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.12INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigFlush
OBJECT-TYPE
Flush all pending policy objects
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.13INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigDebug
OBJECT-TYPE
Possible debug flags for QoS
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.14Integer32read-writecurrent
alaQoSConfigUserportFilter
OBJECT-TYPE
Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 spoofv6 = 2048
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.15Integer32read-createcurrent
alaQoSConfigAppliedUserportFilter
OBJECT-TYPE
Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 spoofv6 = 2048
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.16Integer32read-onlycurrent
alaQoSConfigUserportShutdown
OBJECT-TYPE
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 spoofv6 = 2048
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.17Integer32read-createcurrent
alaQoSConfigAppliedUserportShutdown
OBJECT-TYPE
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 spoofv6 = 2048
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.18Integer32read-onlycurrent
alaQoSConfigAutoPhones
OBJECT-TYPE
Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to feature.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.19INTEGER {pri0(0), pri1(1), pri2(2), pri3(3), pri4(4), pri5(5), pri6(6), pri7(7), trusted(8), disable(9)}read-writecurrent
alaQoSConfigQMPage
OBJECT-TYPE
Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.20INTEGER {yes(1), no(2)}read-writecurrent
alaQoSConfigQMMACGroup
OBJECT-TYPE
Group name for quarantine manager quarantined MACs.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.21SnmpAdminString (SIZE(0..31))read-writecurrent
alaQoSConfigQMPath
OBJECT-TYPE
Default path for remediation server redirect.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.22SnmpAdminString (SIZE(0..255))read-writecurrent
alaQoSConfigDEIMapping
OBJECT-TYPE
This object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.23INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConfigDEIMarking
OBJECT-TYPE
This object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.24INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSConfigSwitchGroup
OBJECT-TYPE
How to match the network group `Switch'. expanded -- Match each interface address as a unique identifier. compact -- Match Switch interfaces using an aggregated identifier.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.25INTEGER {expanded(1), compact(2)}read-writecurrent
alaQoSVmSnooping
OBJECT-TYPE
Is VM Snooping enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.26INTEGER {enable(1), disabled(2)}read-writecurrent
alaQoSStats
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31
alaQoSStatsSpoofedEvents
OBJECT-TYPE
Total Number of spoofed events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.1Counter32read-onlycurrent
alaQoSStatsNonSpoofedEvents
OBJECT-TYPE
Total number of non-spoofed events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.2Counter32read-onlycurrent
alaQoSStatsSpoofedv6Events
OBJECT-TYPE
Total Number of spoofedv6 events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.3Counter32read-onlycurrent
alaQoSStatsNonSpoofedv6Events
OBJECT-TYPE
Total number of non-spoofedv6 events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.4Counter32read-onlycurrent
alaQoSValidityPeriodTable
OBJECT-TYPE
Table of QoS ValidityPeriod definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32not-accessiblecurrent
alaQoSValidityPeriodEntry
OBJECT-TYPE
Definition of QoS ValidityPeriod
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1not-accessiblecurrent
alaQoSValidityPeriodName
OBJECT-TYPE
Name of validity period
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSValidityPeriodSource
OBJECT-TYPE
What entity created the validity period.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSValidityPeriodDays
OBJECT-TYPE
Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.3Integer32read-createcurrent
alaQoSValidityPeriodDaysStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSValidityPeriodMonths
OBJECT-TYPE
Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.5Integer32read-createcurrent
alaQoSValidityPeriodMonthsStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSValidityPeriodHour
OBJECT-TYPE
Time of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.7SnmpAdminString (SIZE(0..7))read-createcurrent
alaQoSValidityPeriodHourStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.8INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSValidityPeriodEndHour
OBJECT-TYPE
Time of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.9SnmpAdminString (SIZE(0..7))read-createcurrent
alaQoSValidityPeriodInterval
OBJECT-TYPE
Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.10SnmpAdminString (SIZE(0..19))read-createcurrent
alaQoSValidityPeriodIntervalStatus
OBJECT-TYPE
Status field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.11INTEGER {enabled(1), disabled(2)}read-createcurrent
alaQoSValidityPeriodEndInterval
OBJECT-TYPE
Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.12SnmpAdminString (SIZE(0..19))read-createcurrent
alaQoSValidityPeriodRowStatus
OBJECT-TYPE
Used to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.13RowStatusread-createcurrent
alaQoSAppliedValidityPeriodTable
OBJECT-TYPE
Table of QoS AppliedValidityPeriod definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33not-accessiblecurrent
alaQoSAppliedValidityPeriodEntry
OBJECT-TYPE
Definition of QoS AppliedValidityPeriod
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1not-accessiblecurrent
alaQoSAppliedValidityPeriodName
OBJECT-TYPE
Name of validity period
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedValidityPeriodSource
OBJECT-TYPE
What entity created the validity period.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-onlycurrent
alaQoSAppliedValidityPeriodDays
OBJECT-TYPE
Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.3Integer32read-onlycurrent
alaQoSAppliedValidityPeriodDaysStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedValidityPeriodMonths
OBJECT-TYPE
Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.5Integer32read-onlycurrent
alaQoSAppliedValidityPeriodMonthsStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedValidityPeriodHour
OBJECT-TYPE
Time of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.7SnmpAdminString (SIZE(0..7))read-onlycurrent
alaQoSAppliedValidityPeriodHourStatus
OBJECT-TYPE
Status field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.8INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedValidityPeriodEndHour
OBJECT-TYPE
Time of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.9SnmpAdminString (SIZE(0..7))read-onlycurrent
alaQoSAppliedValidityPeriodInterval
OBJECT-TYPE
Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.10SnmpAdminString (SIZE(0..19))read-onlycurrent
alaQoSAppliedValidityPeriodIntervalStatus
OBJECT-TYPE
Status field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaQoSAppliedValidityPeriodEndInterval
OBJECT-TYPE
Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.12SnmpAdminString (SIZE(0..19))read-onlycurrent
alaQoSAppliedValidityPeriodRowStatus
OBJECT-TYPE
Used to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.13RowStatusread-createcurrent
alaQoSRuleGroupsTable
OBJECT-TYPE
Table of QoS RuleGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34not-accessiblecurrent
alaQoSRuleGroupsEntry
OBJECT-TYPE
Definition of QoS RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1not-accessiblecurrent
alaQoSRuleGroupsName
OBJECT-TYPE
Name of rule group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSRuleGroupsSource
OBJECT-TYPE
What entity created the rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSRuleGroupsType
OBJECT-TYPE
Type of rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.3INTEGER {default(1), egress(2), unp(3), appfp(4), empacl(5)}read-createcurrent
alaQoSRuleGroupsEnabled
OBJECT-TYPE
Is this rule grop enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.4INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSRuleGroupsStatus
OBJECT-TYPE
Used to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.5RowStatusread-createcurrent
alaQoSAppliedRuleGroupsTable
OBJECT-TYPE
Table of QoS AppliedRuleGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35not-accessiblecurrent
alaQoSAppliedRuleGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedRuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1not-accessiblecurrent
alaQoSAppliedRuleGroupsName
OBJECT-TYPE
Name of rule group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedRuleGroupsSource
OBJECT-TYPE
What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSAppliedRuleGroupsType
OBJECT-TYPE
What entity created the rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.3INTEGER {default(1), egress(2), unp(3), appfp(4), empacl(5)}read-onlycurrent
alaQoSAppliedRuleGroupsEnabled
OBJECT-TYPE
Is this rule grop enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.4INTEGER {enable(1), disable(2)}read-createcurrent
alaQoSAppliedRuleGroupsStatus
OBJECT-TYPE
Used to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.5RowStatusread-createcurrent
alaQoSRuleGroupTable
OBJECT-TYPE
Table of QoS RuleGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36not-accessiblecurrent
alaQoSRuleGroupEntry
OBJECT-TYPE
Definition of QoS RuleGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1not-accessiblecurrent
alaQoSRuleGroupRuleName
OBJECT-TYPE
Name of rule in rule group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSRuleGroupMatches
OBJECT-TYPE
Number of times this rule has been matched.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.2Counter32read-onlycurrent
alaQoSRuleGroupCountType
OBJECT-TYPE
Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.3INTEGER {packets(1), bytes(2)}read-createcurrent
alaQoSRuleGroupPacketCount
OBJECT-TYPE
Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.4Counter64read-onlycurrent
alaQoSRuleGroupByteCount
OBJECT-TYPE
Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.5Counter64read-onlycurrent
alaQoSRuleGroupStatus
OBJECT-TYPE
Used to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.6RowStatusread-createcurrent
alaQoSRuleGroupGreenPacketCount
OBJECT-TYPE
Counter for the number of packets which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.7Counter64read-onlycurrent
alaQoSRuleGroupYellowPacketCount
OBJECT-TYPE
Counter for the number of packets which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.8Counter64read-onlycurrent
alaQoSRuleGroupRedPacketCount
OBJECT-TYPE
Counter for the number of packets which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.9Counter64read-onlycurrent
alaQoSRuleGroupGreenByteCount
OBJECT-TYPE
Counter for the number of Bytes which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.10Counter64read-onlycurrent
alaQoSRuleGroupYellowByteCount
OBJECT-TYPE
Counter for the number of Bytes which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.11Counter64read-onlycurrent
alaQoSRuleGroupRedByteCount
OBJECT-TYPE
Counter for the number of Bytes which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.12Counter64read-onlycurrent
alaQoSAppliedRuleGroupTable
OBJECT-TYPE
Table of QoS AppliedRuleGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37not-accessiblecurrent
alaQoSAppliedRuleGroupEntry
OBJECT-TYPE
Definition of QoS AppliedRuleGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1not-accessiblecurrent
alaQoSAppliedRuleGroupRuleName
OBJECT-TYPE
Name of rule in rule group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedRuleGroupMatches
OBJECT-TYPE
Number of times this rule has been matched.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.2Counter32read-onlycurrent
alaQoSAppliedRuleGroupCountType
OBJECT-TYPE
Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.3INTEGER {packets(1), bytes(2)}read-createcurrent
alaQoSAppliedRuleGroupPacketCount
OBJECT-TYPE
Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.4Counter64read-onlycurrent
alaQoSAppliedRuleGroupByteCount
OBJECT-TYPE
Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.5Counter64read-onlycurrent
alaQoSAppliedRuleGroupStatus
OBJECT-TYPE
Used to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.6RowStatusread-createcurrent
alaQoSAppliedRuleGroupGreenPacketCount
OBJECT-TYPE
Counter for the number of packets which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.7Counter64read-onlycurrent
alaQoSAppliedRuleGroupYellowPacketCount
OBJECT-TYPE
Counter for the number of packets which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.8Counter64read-onlycurrent
alaQoSAppliedRuleGroupRedPacketCount
OBJECT-TYPE
Counter for the number of packets which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.9Counter64read-onlycurrent
alaQoSAppliedRuleGroupGreenByteCount
OBJECT-TYPE
Counter for the number of Bytes which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.10Counter64read-onlycurrent
alaQoSAppliedRuleGroupYellowByteCount
OBJECT-TYPE
Counter for the number of Bytes which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.11Counter64read-onlycurrent
alaQoSAppliedRuleGroupRedByteCount
OBJECT-TYPE
Counter for the number of Bytes which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.12Counter64read-onlycurrent
alaQoSV6NetworkGroupTable
OBJECT-TYPE
Table of QoS V6NetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40not-accessiblecurrent
alaQoSV6NetworkGroupEntry
OBJECT-TYPE
Definition of QoS NetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1not-accessiblecurrent
alaQoSV6NetworkGroupIpAddr
OBJECT-TYPE
IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.1Ipv6Addressnot-accessiblecurrent
alaQoSV6NetworkGroupIpMask
OBJECT-TYPE
IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.2Ipv6Addressnot-accessiblecurrent
alaQoSV6NetworkGroupStatus
OBJECT-TYPE
Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.3RowStatusread-createcurrent
alaQoSAppliedV6NetworkGroupTable
OBJECT-TYPE
Table of QoS AppliedNetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41not-accessiblecurrent
alaQoSAppliedV6NetworkGroupEntry
OBJECT-TYPE
Definition of QoS AppliedNetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1not-accessiblecurrent
alaQoSAppliedV6NetworkGroupIpAddr
OBJECT-TYPE
IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.1Ipv6Addressnot-accessiblecurrent
alaQoSAppliedV6NetworkGroupIpMask
OBJECT-TYPE
IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.2Ipv6Addressnot-accessiblecurrent
alaQoSAppliedV6NetworkGroupStatus
OBJECT-TYPE
Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.3RowStatusread-createcurrent
alaQoSDSCPTable
OBJECT-TYPE
Table of QoS Condition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55not-accessibledeprecated
alaQoSDSCPEntry
OBJECT-TYPE
Definition of QoS DSCP
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1not-accessibledeprecated
alaQoSDSCPEntryNumber
OBJECT-TYPE
DSCP Entry number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.1Integer32 (1..5000)not-accessibledeprecated
alaQoSDSCPPriority
OBJECT-TYPE
DSCP priority for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.2Integer32read-createdeprecated
alaQoSDSCPDropPrecedence
OBJECT-TYPE
DSCP drop precedence for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.3INTEGER {low(1), medium(2), high(3)}read-createdeprecated
alaQoSDSCPRowStatus
OBJECT-TYPE
RowStatus entry for QoS DSCP.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.4RowStatusread-createdeprecated
alaQoSAutoMacRangeTable
OBJECT-TYPE
Table of QoS Auto Mac ranges
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56not-accessiblecurrent
alaQoSAutoMacRangeEntry
OBJECT-TYPE
Definition of QoS Auto Mac Range
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1not-accessiblecurrent
alaQoSAutoMacRangeIndex
OBJECT-TYPE
Index to the Mac range table.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.1Unsigned32not-accessiblecurrent
alaQoSAutoMacRangeStart
OBJECT-TYPE
specifies the starting mac-address of the default mac-range which is supported by qos auto phones.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.2MacAddressread-onlycurrent
alaQoSAutoMacRangeEnd
OBJECT-TYPE
specifies the end mac-address of the default mac-range which is supported by qos auto phones.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.3MacAddressread-onlycurrent
alaQoSExtendedRuleTable
OBJECT-TYPE
Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57not-accessiblecurrent
alaQoSExtendedRuleEntry
OBJECT-TYPE
Definition of QoS Rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1not-accessiblecurrent
alaQoSExtendedRuleSplitRuleID
OBJECT-TYPE
Split Rule ID defined from the number of members in the group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.1Unsigned32 (1..8192)not-accessiblecurrent
alaQoSExtendedRuleChassis
OBJECT-TYPE
Chassis on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.2Integer32 (0..16)read-onlycurrent
alaQoSExtendedRuleSlot
OBJECT-TYPE
Slot on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.3Integer32 (0..16)read-onlycurrent
alaQoSExtendedRulePort
OBJECT-TYPE
Port on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.4Integer32 (1..128)read-onlycurrent
alaQoSExtendedRulePacketCount
OBJECT-TYPE
Counter for packets matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.5Counter64read-onlycurrent
alaQoSExtendedRuleByteCount
OBJECT-TYPE
Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.6Counter64read-onlycurrent
alaQoSExtendedRuleGreenPacketCount
OBJECT-TYPE
Counter for the number of packets which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.7Counter64read-onlycurrent
alaQoSExtendedRuleYellowPacketCount
OBJECT-TYPE
Counter for the number of packets which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.8Counter64read-onlycurrent
alaQoSExtendedRuleRedPacketCount
OBJECT-TYPE
Counter for the number of packets which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.9Counter64read-onlycurrent
alaQoSExtendedRuleGreenByteCount
OBJECT-TYPE
Counter for the number of Bytes which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.10Counter64read-onlycurrent
alaQoSExtendedRuleYellowByteCount
OBJECT-TYPE
Counter for the number of Bytes which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.11Counter64read-onlycurrent
alaQoSExtendedRuleRedByteCount
OBJECT-TYPE
Counter for the number of Bytes which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.12Counter64read-onlycurrent
alaQoSIpNetworkSummaryTable
OBJECT-TYPE
Table of QoS IpNetworkSummary definitions.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58not-accessiblecurrent
alaQoSIpNetworkSummaryEntry
OBJECT-TYPE
Definition of QoS IpNetworkSummary.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1not-accessiblecurrent
alaQoSIpNetworkSummaryProtocol
OBJECT-TYPE
Network Protocols as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.1SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSIpNetworkSummarySourceIpAddressType
OBJECT-TYPE
Source Ip Address Type as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.2InetAddressType {ipv4(1), ipv6(2)}read-onlycurrent
alaQoSIpNetworkSummarySourceIpAddress
OBJECT-TYPE
Source IP address as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.3InetAddress (SIZE(4 | 16))read-onlycurrent
alaQoSIpNetworkSummaryDestinationIpAddressType
OBJECT-TYPE
Destination Ip Address Type as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.4InetAddressType {ipv4(1), ipv6(2)}read-onlycurrent
alaQoSIpNetworkSummaryDestinationIpAddress
OBJECT-TYPE
Destination Ip Address as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.5InetAddress (SIZE(4 | 16))read-onlycurrent
alaQoSIpNetworkSummarySourceGroup
OBJECT-TYPE
Source Group as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.6SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSIpNetworkSummaryDestinationGroup
OBJECT-TYPE
Destination Group as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.7SnmpAdminString (SIZE(0..31))read-onlycurrent
alaQoSIpNetworkSummaryVrfName
OBJECT-TYPE
VRF Name as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.8SnmpAdminString (SIZE(0..32))read-onlycurrent
alaQoSIpNetworkSummaryAction
OBJECT-TYPE
The action performed when the packet hit the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.9INTEGER {accept(1), deny(2)}read-onlycurrent
alaQoSIpNetworkSummaryHitCount
OBJECT-TYPE
Number of packets hit the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.10Counter64read-onlycurrent
alaQoSVlanGroupsTable
OBJECT-TYPE
Table of QoS VlanGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.59not-accessiblecurrent
alaQoSVlanGroupsEntry
OBJECT-TYPE
Definition of QoS VlanGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.59.1not-accessiblecurrent
alaQoSVlanGroupsName
OBJECT-TYPE
Name of vlan group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.59.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSVlanGroupsSource
OBJECT-TYPE
What entity created the vlan group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.59.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSVlanGroupsStatus
OBJECT-TYPE
Used to create/delete vlan groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.59.1.3RowStatusread-createcurrent
alaQoSVlanGroupTable
OBJECT-TYPE
Table of QoS VlanGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.60not-accessiblecurrent
alaQoSVlanGroupEntry
OBJECT-TYPE
Definition of QoS VlanGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.60.1not-accessiblecurrent
alaQoSVlanGroupVlanID
OBJECT-TYPE
Vlan ID of this entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.60.1.1Integer32 (1..4094)not-accessiblecurrent
alaQoSVlanGroupVlanIDEnd
OBJECT-TYPE
Vlan ID end of this entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.60.1.2Integer32 (1..4094)not-accessiblecurrent
alaQoSVlanGroupStatus
OBJECT-TYPE
Rowstatus of this entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.60.1.3RowStatusread-createcurrent
alaQoSAppliedVlanGroupsTable
OBJECT-TYPE
Table of QoS AppliedVlanGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.61not-accessiblecurrent
alaQoSAppliedVlanGroupsEntry
OBJECT-TYPE
Definition of QoS AppliedVlanGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.61.1not-accessiblecurrent
alaQoSAppliedVlanGroupsName
OBJECT-TYPE
Name of applied vlan group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.61.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaQoSAppliedVlanGroupsSource
OBJECT-TYPE
What entity created the applied vlan group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.61.1.2INTEGER {ldap(1), cli(2), blt(3), api(4), imp(5)}read-createcurrent
alaQoSAppliedVlanGroupsStatus
OBJECT-TYPE
Used to create/delete applied vlan groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.61.1.3RowStatusread-createcurrent
alaQoSAppliedVlanGroupTable
OBJECT-TYPE
Table of QoS AppliedVlanGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.62not-accessiblecurrent
alaQoSAppliedVlanGroupEntry
OBJECT-TYPE
Definition of QoS AppliedVlanGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.62.1not-accessiblecurrent
alaQoSAppliedVlanGroupVlanID
OBJECT-TYPE
Starting value for vlan ID for this entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.62.1.1Integer32 (1..4094)not-accessiblecurrent
alaQoSAppliedVlanGroupVlanIDEnd
OBJECT-TYPE
Ending value for vlan ID for this entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.62.1.2Integer32 (1..4094)not-accessiblecurrent
alaQoSAppliedVlanGroupStatus
OBJECT-TYPE
Rowstatus of this entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.62.1.3RowStatusread-createcurrent
alaQoSMIBConformance
OBJECT-IDENTITY
Branch for QoS Managed Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2current
alaQoSMIBGroups
OBJECT-IDENTITY
Branch for QoS Units of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1current
alaQoSMIBCompliances
OBJECT-IDENTITY
Branch for QoS Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2current

Conformance

NameOIDStatus
alaQoSMIBRuleObjects
OBJECT-GROUP
Collections of objects providing information for Rules
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.1current
alaQoSMIBAppliedRuleObjects
OBJECT-GROUP
Collections of objects providing information for applied Rules
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.2current
alaQoSMIBConditionObjects
OBJECT-GROUP
Collections of objects providing information for Conditions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.3current
alaQoSMIBAppliedConditionObjects
OBJECT-GROUP
Collections of objects providing information for applied Conditions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.4current
alaQoSMIBServiceObjects
OBJECT-GROUP
Collections of objects providing information for Services
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.5current
alaQoSMIBAppliedServiceObjects
OBJECT-GROUP
Collections of objects providing information for applied Services
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.6current
alaQoSMIBServiceGroupsObjects
OBJECT-GROUP
Collections of objects providing information for ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.7current
alaQoSMIBAppliedServiceGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.8current
alaQoSMIBServiceGroupObjects
OBJECT-GROUP
Collections of objects providing information for ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.9current
alaQoSMIBAppliedServiceGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.10current
alaQoSMIBNetworkGroupsObjects
OBJECT-GROUP
Collections of objects providing information for NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.11current
alaQoSMIBAppliedNetworkGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.12current
alaQoSMIBNetworkGroupObjects
OBJECT-GROUP
Collections of objects providing information for NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.13current
alaQoSMIBAppliedNetworkGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.14current
alaQoSMIBMACGroupsObjects
OBJECT-GROUP
Collections of objects providing information for MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.15current
alaQoSMIBAppliedMACGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.16current
alaQoSMIBMACGroupObjects
OBJECT-GROUP
Collections of objects providing information for MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.17current
alaQoSMIBAppliedMACGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.18current
alaQoSMIBPortGroupsObjects
OBJECT-GROUP
Collections of objects providing information for PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.19current
alaQoSMIBAppliedPortGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.20current
alaQoSMIBPortGroupObjects
OBJECT-GROUP
Collections of objects providing information for PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.21current
alaQoSMIBAppliedPortGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.22current
alaQoSMIBMapGroupsObjects
OBJECT-GROUP
Collections of objects providing information for MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.23current
alaQoSMIBAppliedMapGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.24current
alaQoSMIBMapGroupObjects
OBJECT-GROUP
Collections of objects providing information for MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.25current
alaQoSMIBAppliedMapGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.26current
alaQoSMIBActionObjects
OBJECT-GROUP
Collections of objects providing information for Actions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.27current
alaQoSMIBAppliedActionObjects
OBJECT-GROUP
Collections of objects providing information for applied Actions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.28current
alaQoSMIBPortObjects
OBJECT-GROUP
Collections of objects providing information for Ports
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.29current
alaQoSMIBConfigObjects
OBJECT-GROUP
Collections of objects providing information for Configs
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.30current
alaQoSMIBStatsObjects
OBJECT-GROUP
Collections of objects providing information for Statss
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.31current
alaQoSMIBRuleGroupsObjects
OBJECT-GROUP
Collections of objects providing information for RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.32current
alaQoSMIBAppliedRuleGroupsObjects
OBJECT-GROUP
Collections of objects providing information for applied RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.33current
alaQoSMIBRuleGroupObjects
OBJECT-GROUP
Collections of objects providing information for RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.34current
alaQoSMIBAppliedRuleGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.35current
alaQoSMIBValidityPeriodObjects
OBJECT-GROUP
Collections of objects providing information for Validity Periods
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.36current
alaQoSMIBAppliedValidityPeriodObjects
OBJECT-GROUP
Collections of objects providing information for applied Validity Periods
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.37current
alaQoSMIBDSCPGroupObjects
OBJECT-GROUP
Collections of objects providing information for DSCP Table
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.38current
alaQoSMIBAutoMacRangeGroupObjects
OBJECT-GROUP
Collections of objects providing information for Auto Qos Mac Range Table
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.39current
alaQoSMIBV6NetworkGroupObjects
OBJECT-GROUP
Collections of objects providing information for V6NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.40current
alaQoSMIBAppliedV6NetworkGroupObjects
OBJECT-GROUP
Collections of objects providing information for applied V6NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.41current
alaQoSRuleExtendedObjects
OBJECT-GROUP
Collections of objects providing information for rule extended
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.42current
alaQoSIpNetworkSummaryGroupObjects
OBJECT-GROUP
Collections of objects providing information for Ip Network Summary.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.43current
alaQoSMIBVlanGroupsObjects
OBJECT-GROUP
Collections of objects providing information for VlanGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.44current
alaQoSMIBVlanGroupObjects
OBJECT-GROUP
Collections of objects providing information for VlanGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.45current
alaQoSMIBAppliedVlanGroupsObjects
OBJECT-GROUP
Collections of objects providing information for AppliedVlanGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.46current
alaQoSMIBAppliedVlanGroupObjects
OBJECT-GROUP
Collections of objects providing information for AppliedVlanGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.47current
alaQoSMIBCompliance
MODULE-COMPLIANCE
Compliance statement for QoS.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2.1current