MIBs Depot

ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.19.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2007-04-03 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB
Digest
sha256:2141c4d199271bd24e4aa0164eee538242651a15f97a8d2d0b786a5f745c59fe

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line Port Mirroring and Monitoring for mirroring/monitoring session control The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1PortMirroringMonitoring
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SFLOW-MIBSFlowInstance, sFlowCpEntry, sFlowFsEntry
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
RMON-MIB
SFLOW-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MirMonErrorIds
TEXTUAL-CONVENTION
This data type is used to define the different type of error occured while configuring Mirroring/Monitoring.
current

Objects

NameOIDSyntaxAccessStatus
alcatelIND1PortMirMonMIBNotifications
OBJECT-IDENTITY
Root For Port Mirroring and Monitoring Subsystem Managed Notifications.
1.3.6.1.4.1.6486.801.1.2.1.19.1.0current
alcatelIND1PortMirMonMIBObjects
OBJECT-IDENTITY
Branch For Port Mirroring and Monitoring Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1current
mirmonMirroring
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1
mirrorTable
OBJECT-TYPE
A list of port mirroring instances.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1not-accessiblecurrent
mirrorEntry
OBJECT-TYPE
A port mirroring entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1not-accessiblecurrent
mirrorSessionNumber
OBJECT-TYPE
Identifies a specific port mirroring instance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
mirrorMirroredIfindex
OBJECT-TYPE
This variable is deprecated and value will be ignored. Please use mirrorSrcTable to configure mirrored ports. The physical identification number for this mirroring port instance (mirrorred port).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.2InterfaceIndexread-createdeprecated
mirrorMirroringIfindex
OBJECT-TYPE
The physical identification number for this mirroring port instance (mirroring port).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.3InterfaceIndexread-createdeprecated
mirrorStatus
OBJECT-TYPE
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.4INTEGER {off(1), on(2)}read-createcurrent
mirrorUnblockedVLAN
OBJECT-TYPE
A VLAN identifier which specifies the VLAN identifier that must remain unblocked no matter what is the output of the spanning tree algorithm.Value 0 indicates this parameter is not set
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.5Integer32 (0..4094)read-createcurrent
mirrorRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.6RowStatusread-createcurrent
mirrorDirection
OBJECT-TYPE
This variable is deprecated and the value will be ignored. Please use mirrorSrcTable to set the direction of mirroring. Direction of mirroring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.7INTEGER {inport(1), outport(2), bidirectional(3)}read-createdeprecated
mirrorSessOperStatus
OBJECT-TYPE
Whether mirroring session is active.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.8INTEGER {off(1), on(2)}read-onlycurrent
mirrorTaggedVLAN
OBJECT-TYPE
A VLAN identifier which specifies the VLAN identifier that must used to tag the mirrored packets going out of the MTP for remote port mirroring .Value 0 indicates this parameter is not set
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.9Integer32 (0..4094)read-createcurrent
mirrorModeLoopback
OBJECT-TYPE
To enable loopback mechanism on the destination port of the respective remote port mirroring session. To disable the loopback mechanism, remove the session completely.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.10INTEGER {enable(1), disable(2)}read-createcurrent
mirrorSrcTable
OBJECT-TYPE
A list of port mirroring instances.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2not-accessiblecurrent
mirrorSrcEntry
OBJECT-TYPE
A port mirroring entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1not-accessiblecurrent
mirrorSrcMirroredIf
OBJECT-TYPE
The physical identification number for this mirroring port instance (mirrorred port).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.1InterfaceIndexread-onlycurrent
mirrorSrcStatus
OBJECT-TYPE
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.2INTEGER {disable(1), enable(2)}read-createcurrent
mirrorSrcDirection
OBJECT-TYPE
Direction of mirroring on the source port of this entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.3INTEGER {inport(1), outport(2), bidirectional(3)}read-createcurrent
mirrorSrcRowStatus
OBJECT-TYPE
The status of this table entry.Row Status to control creation, modification and deletion of this entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.4RowStatusread-createcurrent
mirrorSrcOperStatus
OBJECT-TYPE
The mirroring operational status of this mirrored source.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.5INTEGER {off(1), on(2)}read-onlycurrent
mirrorDstTable
OBJECT-TYPE
A list of port mirroring instances.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3not-accessiblecurrent
mirrorDstEntry
OBJECT-TYPE
A port mirroring entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1not-accessiblecurrent
mirrorDstMirroringIf
OBJECT-TYPE
The physical identification number for this mirroring port instance (mirrorred port).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.1InterfaceIndexnot-accessiblecurrent
mirrorDstOperStatus
OBJECT-TYPE
The mirroring operational status of this mirrored Destination.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.2INTEGER {off(1), on(2)}read-onlycurrent
mirrorDstAdminStatus
OBJECT-TYPE
The mirroring admin status of mirrored destination.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.3INTEGER {enable(1), disable(2)}read-createcurrent
mirrorDstRowStatus
OBJECT-TYPE
The status of this table entry.Row Status to control creation, modification and deletion of this entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.4RowStatusread-createcurrent
mirrorDstTagRemove
OBJECT-TYPE
The mirroring tag-remove value of this mirrored destination.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.5TruthValueread-createcurrent
mirmonMonitoring
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2
monitorTable
OBJECT-TYPE
A list of port monitoring instances.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1not-accessiblecurrent
monitorEntry
OBJECT-TYPE
A port monitoring entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1not-accessiblecurrent
monitorSessionNumber
OBJECT-TYPE
Identifies a specific port monitoring instance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.1Integer32 (1..2147483647)read-onlycurrent
monitorIfindex
OBJECT-TYPE
The physical identification number for this monitoring port instance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.2InterfaceIndexread-createdeprecated
monitorFileStatus
OBJECT-TYPE
The status of the file option of a monitoring port instance (default off)
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.3INTEGER {off(1), on(2)}read-createcurrent
monitorFileName
OBJECT-TYPE
The name of the file in which the traffic will be stored (default PMONITOR.ENC).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.4SnmpAdminString (SIZE(0..63))read-createcurrent
monitorFileSize
OBJECT-TYPE
The number of 65536 ( 64K ) bytes allowed for the file. The file contains only the last monitorFileSize bytes of the current port monitoring instance (default 65536 bytes).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.5Integer32 (1..32)read-createcurrent
monitorScreenStatus
OBJECT-TYPE
The status of the screen option of a monitoring port instance (default off)
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.6INTEGER {off(1), on(2)}read-createcurrent
monitorScreenLine
OBJECT-TYPE
The number of lines used when the screen option is activated (default 24)
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.7Integer32 (1..100)read-createcurrent
monitorTrafficType
OBJECT-TYPE
The type of traffic being monitored (default all)
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.8INTEGER {all(1), unicast(2), multicast(3), broadcast(4), unimulti(5), unibroad(6), multibroad(7)}read-createcurrent
monitorStatus
OBJECT-TYPE
The status of the port monitoring instance
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.9INTEGER {off(1), on(2), suspended(3)}read-createcurrent
monitorFileOverWrite
OBJECT-TYPE
The status of the File Over Write option of a monitoring port instance (default on)
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.10INTEGER {off(1), on(2)}read-createcurrent
monitorDirection
OBJECT-TYPE
Direction of monitoring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.11INTEGER {inport(1), outport(2), bidirectional(3)}read-createdeprecated
monitorTimeout
OBJECT-TYPE
The number of seconds allowed for this session before the session gets deleted. (default:forever 0 second).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.12Integer32 (0..2147483647)read-createcurrent
monitorRowStatus
OBJECT-TYPE
The status of this table entry. Create,Delete and Modify.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.13RowStatusread-createcurrent
monitorCaptureType
OBJECT-TYPE
The number of bytes per packet allowed to capture .(brief: 64 bytes, full: Entire packet).
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.14INTEGER {brief(1), full(2)}read-createcurrent
monitorSrcTable
OBJECT-TYPE
A list of port monitoring instances.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2not-accessiblecurrent
monitorSrcEntry
OBJECT-TYPE
A port monitoring entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1not-accessiblecurrent
monitorSrcIfindex
OBJECT-TYPE
The physical identification number for this monitoring port instance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.1InterfaceIndexnot-accessiblecurrent
monitorSrcStatus
OBJECT-TYPE
The status of the port monitoring instance
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.2INTEGER {off(1), on(2)}read-createcurrent
monitorSrcDirection
OBJECT-TYPE
Direction of monitoring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.3INTEGER {inport(1), outport(2), bidirectional(3)}read-createcurrent
monitorSrcRowStatus
OBJECT-TYPE
The status of this table entry. Create,Delete and Modify.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.4RowStatusread-createcurrent
mirmonNotificationVars
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3
mirmonPrimarySlot
OBJECT-TYPE
Slot of mirrored or monitored interface.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.1Integer32 (1..16)read-onlycurrent
mirmonPrimaryPort
OBJECT-TYPE
Port of mirrored or monitored interface.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.2Integer32 (1..128)read-onlycurrent
mirroringSlot
OBJECT-TYPE
Slot of mirroring interface.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.3Integer32 (1..16)read-onlycurrent
mirroringPort
OBJECT-TYPE
Port of mirroring interface.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.4Integer32 (1..128)read-onlycurrent
mirMonSession
OBJECT-TYPE
The Mirroring session number.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.5Integer32 (1..2147483647)read-onlycurrent
mirMonError
OBJECT-TYPE
The Error returned by the NI which failed to configure Mirroring/Monitoring
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.6MirMonErrorIdsread-onlycurrent
mirMonErrorNi
OBJECT-TYPE
The NI slot number.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.7Integer32 (1..16)read-onlycurrent
mirmonSFlowObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4
alasFlowFsTable
OBJECT-TYPE
A table of the flow samplers within a device.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1not-accessiblecurrent
alasFlowFsEntry
OBJECT-TYPE
Attributes of a flow sampler.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1not-accessiblecurrent
alasFlowFsDeleteEntry
OBJECT-TYPE
The object is used to delete entries in the sFlowFsTable. Only value 6 is supported.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1.1INTEGER {active(1), notInService(2), delete(6)}read-writecurrent
alasFlowCpTable
OBJECT-TYPE
A table of the flow samplers within a device.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2not-accessiblecurrent
alasFlowCpEntry
OBJECT-TYPE
Attributes of a flow sampler.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1not-accessiblecurrent
alasFlowCpDeleteEntry
OBJECT-TYPE
The object is used to delete entries in the sFlowCpTable. Only value 6 is supported.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1.1INTEGER {active(1), notInService(2), delete(6)}read-writecurrent
alasFlowAgentConfigType
OBJECT-TYPE
The Agent Config Information 1 -- Default 2 -- sFlow Interface IP Specified by User
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.3INTEGER {default(1), user(2)}read-writecurrent
alasFlowAgentAddressType
OBJECT-TYPE
The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.4InetAddressTyperead-writecurrent
alasFlowAgentAddress
OBJECT-TYPE
The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.5InetAddressread-writecurrent
alasFlowFsExtTable
OBJECT-TYPE
A table of the flow samplers within a device.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.6not-accessiblecurrent
alasFlowFsExtEntry
OBJECT-TYPE
Attributes of a flow sampler.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.6.1not-accessiblecurrent
alasFlowFsInstance
OBJECT-TYPE
Flow samplers instance
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.6.1.1SFlowInstancenot-accessiblecurrent
alasFlowFsRate
OBJECT-TYPE
Flow samplers rate
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.6.1.2Integer32read-createcurrent
alasFlowFsRateRowStatus
OBJECT-TYPE
The status of this table entry.Row Status to control creation, modification and deletion of this entry.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.6.1.3RowStatusread-createcurrent
alasFlowExtendedSwitch
OBJECT-TYPE
Indicates whether extended switch data sampling is enabled or disabled in the sFlow record. When enabled (1), additional extended switch data is included in the sFlow record. When disabled (2), extended switch data is not included.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.7INTEGER {enabled(1), disabled(2)}read-writecurrent
alasFlowExtendedRouter
OBJECT-TYPE
Indicates whether extended router data sampling is enabled or disabled in the sFlow record. When enabled (1), additional extended router data is included in the sFlow record. When disabled (2), extended router data is not included.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.8INTEGER {enabled(1), disabled(2)}read-writecurrent
mirmonGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.5
mirrorTrafficPriority
OBJECT-TYPE
To set priority for mirroring traffic.
1.3.6.1.4.1.6486.801.1.2.1.19.1.1.5.1INTEGER {normal(1), high(2)}read-createcurrent
alcatelIND1PortMirMonMIBConformance
OBJECT-IDENTITY
Branch For Port Mirroring and Monitoring Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2current
alcatelIND1PortMirMonMIBGroups
OBJECT-IDENTITY
Branch For Port Mirroring and Monitoring Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1current
alcatelIND1PortMirMonMIBCompliances
OBJECT-IDENTITY
Branch For Port Mirroring and Monitoring Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.2current

Notifications

NameOIDStatus
mirrorConfigError
NOTIFICATION-TYPE
The Mirroring Configuration failed on NI. This trap is sent when any NI fails to configure mirroring. Due to this error, port mirroring session will be terminated.
1.3.6.1.4.1.6486.801.1.2.1.19.1.0.1current
monitorFileWritten
NOTIFICATION-TYPE
A File Written Trap is sent when the amount of data requested by the user has been written by the port monitoring instance.
1.3.6.1.4.1.6486.801.1.2.1.19.1.0.2current
mirrorUnlikeNi
NOTIFICATION-TYPE
The Mirroring Configuration is deleted due to the swapping of different NI board type. Port Mirroring session which was active on a slot,cannot continue with the insertion of different NI type in the same slot.
1.3.6.1.4.1.6486.801.1.2.1.19.1.0.3current

Conformance

NameOIDStatus
portMirroringGroup
OBJECT-GROUP
Collection of objects for management of Port Mirroring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.1current
portMonitoringGroup
OBJECT-GROUP
Collection of objects for management of Port Monitoring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.2current
portNotificationVarsGroup
OBJECT-GROUP
Collection of objects which appear only in notifications.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.3current
mirmonTrapsGroup
NOTIFICATION-GROUP
Collection of Traps for port mirroring and monitoring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.4current
sFlowAgentGroup
OBJECT-GROUP
Collection of objects for sFlow agent configuration.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.5current
portMirrorGroup
OBJECT-GROUP
Collection of objects for Mirror configuration.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.6current
portSFlowCpGroup
OBJECT-GROUP
Collection of objects for sFlow Cp configuration.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.7current
portSFlowFsGroup
OBJECT-GROUP
Collection of objects for sFlow Fs configuration.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.8current
portSFlowFsExtGroup
OBJECT-GROUP
Collection of objects for sFlow Fs configuration.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.9current
alcatelIND1PortMirMonMIBCompliance
MODULE-COMPLIANCE
Compliance statement for Port Mirroring and Monitoring.
1.3.6.1.4.1.6486.801.1.2.1.19.1.2.2.1current