MIBs Depot

ALCATEL-IND1-PORT-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.5.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2022-10-21 00:00, 2019-11-27 00:00, 2019-08-07 00:00, 2010-05-13 00:00, 2007-04-03 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-PORT-MIB
Digest
sha256:f99b160850ef383a8c351219fc1a37bac60109f9688f661636aa00ac5f49594c

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This group contains the configuration information data for the Ethernet and Fiber Channel Switching Module. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2022 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1Port
ALCATEL-IND1-LAG-MIBalclnkaggAggIndex
ALCATEL-IND1-VIRTUAL-CHASSIS-MIBVirtualOperChassisId
IF-MIBInterfaceIndex, InterfaceIndexOrZero, ifEntry, ifInErrors, ifIndex, ifOutErrors
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-LAG-MIB
ALCATEL-IND1-PORT-MIB
ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
BRIDGE-MIB
IANAifType-MIB
IEEE8023-LAG-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CableState
TEXTUAL-CONVENTION
an enumerated value used to indicate the status of a cable pair
current

Objects

NameOIDSyntaxAccessStatus
alcatelIND1PortNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.0
alcatelIND1PortMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1
esmConfTrap
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1
esmDrvTrapDrops
OBJECT-TYPE
Partitioned port (separated due to errors).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1.1Integer32read-onlycurrent
physicalPort
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2
esmConfTable
OBJECT-TYPE
A list of ESM Physical Port instances.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1not-accessiblecurrent
esmConfEntry
OBJECT-TYPE
A ESM Physical Port entry.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1not-accessiblecurrent
esmPortSlot
OBJECT-TYPE
The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.1Integer32read-onlycurrent
esmPortIF
OBJECT-TYPE
The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.2Integer32read-onlycurrent
esmPortAutoSpeed
OBJECT-TYPE
The automatically detected port line speed of this ESM port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.3INTEGER {speed100(1), speed10(2), speedAuto(3), unknown(4), speed1000(5), speed10000(6), speed40000(7), speed20000(11), speed21000(12), speed2000(13), speed4000(14), speed8000(15), speed2500(18), speed5000(19), speed25000(22), speed50000(23), speed100000(24), speed200000(25)}read-onlycurrent
esmPortAutoDuplexMode
OBJECT-TYPE
The automatically detected port duplex mode of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for 10/100 = Half duplex mode.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.4INTEGER {fullDuplex(1), halfDuplex(2), autoDuplex(3), unknown(4)}read-onlycurrent
esmPortCfgSpeed
OBJECT-TYPE
The configured port line speed of this ESM port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.5INTEGER {speed100(1), speed10(2), speedAuto(3), speedUnknown(4), speed1000(5), speed10000(6), speed40000(7), speedMax100(8), speedMax1000(9), speed20000(11), speed21000(12), speed2000(13), speed4000(14), speed8000(15), speedMax4000(16), speedMax8000(17), speed2500(18), speed5000(19), speedMax2500(20), speedMax5000(21), speed25000(22), speed50000(23), speed100000(24), speed200000(25)}read-writecurrent
esmPortCfgDuplexMode
OBJECT-TYPE
The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.6INTEGER {fullDuplex(1), halfDuplex(2), autoDuplex(3)}read-writecurrent
esmPortAdminStatus
OBJECT-TYPE
The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.7INTEGER {enable(1), disable(2)}read-writecurrent
esmPortLinkUpDownTrapEnable
OBJECT-TYPE
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enable(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disable(2) otherwise.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.8INTEGER {enable(1), disable(2)}read-writecurrent
esmPortCfgMaxFrameSize
OBJECT-TYPE
Configure the value of the maximum frame size allow. For 10Mbps the range is upto 1518 bytes. For ports with speed > 10Mbps the value can extend upto 9216 bytes.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.11Integer32read-writecurrent
esmPortAlias
OBJECT-TYPE
This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.12SnmpAdminString (SIZE(0..64))read-writecurrent
esmPortCfgPause
OBJECT-TYPE
This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If auto-negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by auto-negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when auto-negotiation is later disabled. For more information on what pause values will be autonegotiated based on settings on this object, please refer to the truth table in the users manual. Note that the value of this object is ignored when the interface is not operating in full-duplex mode.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13INTEGER {disabled(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4)}read-writecurrent
esmPortCfgAutoNegotiation
OBJECT-TYPE
Allow the user to enable or disable the port auto negotiation.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.15INTEGER {enable(1), disable(2)}read-writecurrent
esmPortCfgCrossover
OBJECT-TYPE
Allow the user to configure port crossover. This object is applicable only to copper ports. For fiber ports notapplicable is returned as a status.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.16INTEGER {mdi(1), mdix(2), auto(3), notapplicable(4)}read-writecurrent
esmPortCfgHybridActiveType
OBJECT-TYPE
This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For non hybrid ports notapplicable is returned as a status.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.18INTEGER {notapplicable(0), fiber(1), copper(2)}read-onlycurrent
esmPortCfgHybridMode
OBJECT-TYPE
This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or either fiber/copper (with preference to one of them).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.19INTEGER {notapplicable(0), preferredCopper(1), forcedCopper(2), preferredFiber(3), forcedFiber(4), copper(5), fiber(6), auto(7)}read-writecurrent
esmPortOperationalHybridType
OBJECT-TYPE
This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.20INTEGER {none(0), fiber(1), copper(2)}read-onlycurrent
esmPortBcastRateLimitEnable
OBJECT-TYPE
Enable/disable per port broadcast traffic rate limit. When 'enable' value from esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming broadcast traffic which is limited by the port speed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.21INTEGER {enable(1), disable(2)}read-writecurrent
esmPortBcastRateLimitType
OBJECT-TYPE
The unit applicable to the value in esmPortBcastRateLimit object.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.22INTEGER {mbps(1), percentage(2), pps(3), default(4)}read-writecurrent
esmPortBcastRateLimit
OBJECT-TYPE
The value of the maximum broadcast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortBcastRateLimitType object along with esmPortBcastRateLimit object to set the broadcast rate limit.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.23Integer32read-writecurrent
esmPortMcastRateLimitEnable
OBJECT-TYPE
Enable/disable per port multicast traffic rate limit. When 'enable' value from esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming multicast traffic which is limited by the port speed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.24INTEGER {enable(1), disable(2)}read-writecurrent
esmPortMcastRateLimitType
OBJECT-TYPE
The unit applicable to the value in esmPortMcastRateLimit object.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.25INTEGER {mbps(1), percentage(2), pps(3), default(4)}read-writecurrent
esmPortMcastRateLimit
OBJECT-TYPE
The value of the maximum multicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortMcastRateLimitType object along with esmPortMcastRateLimit object to set the multicast rate limit.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.26Integer32read-writecurrent
esmPortUucastRateLimitEnable
OBJECT-TYPE
Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming unknown unicast traffic which is limited by the port speed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.27INTEGER {enable(1), disable(2)}read-writecurrent
esmPortUucastRateLimitType
OBJECT-TYPE
The unit applicable to the value in esmPortUucastRate object.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.28INTEGER {mbps(1), percentage(2), pps(3), default(4)}read-writecurrent
esmPortUucastRateLimit
OBJECT-TYPE
The value of the maximum unknown unicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortUucastRateLimitType object along with esmPortUucastRateLimit object to set the unknown unicast rate limit.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.29Integer32read-writecurrent
esmPortIngressRateLimitEnable
OBJECT-TYPE
Enable/disable per port ingress traffic rate limit. When 'enable' value from esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming traffic which is limited by the port speed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.30INTEGER {enable(1), disable(2)}read-writecurrent
esmPortIngressRateLimit
OBJECT-TYPE
The value of the maximum ingress traffic that can flow through the port. The actual value depends on the port speed if the configured value is greater than the current port speed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.31Integer32read-writecurrent
esmPortIngressRateLimitBurst
OBJECT-TYPE
The value of ingress traffic burst size in Mbits.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.32Integer32read-writecurrent
esmPortEPPEnable
OBJECT-TYPE
use for port diagnostics
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.33INTEGER {enable(1), disable(2)}read-writecurrent
esmPortEEEEnable
OBJECT-TYPE
10Gbase-T Energy Efficent Ethernet port parameter.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.34INTEGER {enable(1), disable(2)}read-writecurrent
esmPortIsFiberChannelCapable
OBJECT-TYPE
The port can be configured as Fiber Channel interface (yes) or can not be configured as Fiber Channel interface.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.35INTEGER {yes(1), no(2)}read-writecurrent
esmPortBcastThresholdAction
OBJECT-TYPE
The port can be configured to send trap/shutdown if the threshold limit is crossed for Bcast Frames
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.36INTEGER {default(1), trap(2), shutdown(3)}read-writecurrent
esmPortMcastThresholdAction
OBJECT-TYPE
The port can be configured to send trap/shutdown if the threshold limit is crossed for Mcast Frames
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.37INTEGER {default(1), trap(2), shutdown(3)}read-writecurrent
esmPortUucastThresholdAction
OBJECT-TYPE
The port can be configured to send trap/shutdown if the threshold limit is crossed Unknown Unicast Frames
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.38INTEGER {default(1), trap(2), shutdown(3)}read-writecurrent
esmPortMinBcastRateLimit
OBJECT-TYPE
The value of low threshold for bcast.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.39Integer32read-writecurrent
esmPortMinMcastRateLimit
OBJECT-TYPE
The value of low threshold for mcast.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.40Integer32read-writecurrent
esmPortMinUucastRateLimit
OBJECT-TYPE
The value of low threshold for uucast.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.41Integer32read-writecurrent
esmPortBcastStormState
OBJECT-TYPE
The state of the port for broadcast Storm Control.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.42INTEGER {normal(1), storm(2), trap(3)}read-onlycurrent
esmPortMcastStormState
OBJECT-TYPE
The state of the port for multi-cast Storm Control.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.43INTEGER {normal(1), storm(2), trap(3)}read-onlycurrent
esmPortUucastStormState
OBJECT-TYPE
The state of the port for uucast Storm Control.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.44INTEGER {normal(1), storm(2), trap(3)}read-onlycurrent
esmLinkStateChangeTime
OBJECT-TYPE
Time when the link status changed last.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.45Counter64read-onlycurrent
esmLinkStateChangeCount
OBJECT-TYPE
Counter to represent the number of times the link status changed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.46Counter32read-onlycurrent
esmPortIfg
OBJECT-TYPE
The value of inter packet gap in bytes.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.47Integer32read-writecurrent
esmPortFecMode
OBJECT-TYPE
Allow the user to enable or disable the port fec mode. Auto mode will select the appropiate mode based on cable capabilities.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.48INTEGER {disable(1), auto(2), fc(3), rs(4)}read-writecurrent
esmPortFecOperMode
OBJECT-TYPE
Access operational fec mode.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.49INTEGER {disable(1), auto(2), fc(3), rs(4)}read-writecurrent
esmPortGbicType
OBJECT-TYPE
information about Port Speed connected with SFP
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.50INTEGER {gbicLh(1), gbicLx(2), sfpPlusLr1G10G(3), gbicSx(4), sfpPlusSr1G10G(5), sfp10GigBaseT(6), sfpGigBxU(7), sfpGigBxD(8), sfpGigBxU20(9), sfpGigBxD20(10), sfpGigBxU40(11), sfpGigBxD40(12), isfpGigBxU(13), isfpGigBxD(14), gicBx(15), baseT1000(16), baseFx100(17), baseX1001000(18), baseX101001000(19), sfpPlusEr(20), sfpPlusZr(21), sfpPlusZrDwDm(22), sfpPlusZrCwDm(23), sfpPlusZrTdm(24), sfpPlusLr(25), sfpPlusLrm(26), sfpPlusSr(27), sfpPlusCopper(28), qsfpPlusLr4(29), qsfpPlusBd(30), qsfpPlusSr4(31), qsfpPlusCr4(32), qsfpPlusCopper(33), stackingQsfpPlusCopper(34), stackingQsfpPlusSr4(35), stackingQsfpPlusAoc(36), sfpFc248G(37), qsfpPlus4X10GCopper(38), unknown(39), notPresent(40), na(41), qsfpPlus4X10GSr(42), qsfpPlus4X10GLr(43), qsfpPlusAoc(44), sfp25GBaseSr(45), sfp25GBaseLr(46), sfp25GBaseCr(47), sfp25GBaseCAoc(48), sfb50GBaseSr2(49), sfp25GBaseLr2(50), sfp25GBaseCr2(51), sfp100GBaseSr4(52), sfp100GBaseLr4(53), sfp100GBaseCr4(54), sfp100GBaseCwDm4(55), sfp100GBaseAoc4(56), sfp4X25GBaseSr(57), sfp4X25GBaseLr(58), sfp4X25GBaseCr(59), sfp4X25GBaseCwDm(60), sfp4X25GBaseAoc(61), sfp2X50GBaseSr2(62), sfp2X50GBaseLr2(63), sfp2X50GBaseCr2(64), sfp2X50GBaseCwDm2(65), sfp2X50GBaseAoc2(66), qsfpPlusER4(67), qsfpPlusLM4(68), qsfpPlusSwdm4(69), qsfpPlusPsm4(70), qsfp100GBaseDwdm(71), sfp200GBaseCr4(72), sfp200GBaseSr4(73), sfp200GBaseFr4(74), sfp200GBaseDr4(75), sfp200GBaseLr4(76), sfp200GBaseEr4(77), sfp200GBaseAoc(78), sfp50GBaseCr(79), sfp50GBaseSr(80), sfp50GBaseFr(81), sfp50GBaseLr(82), sfp50GBaseEr(83)}read-writecurrent
esmPortInterfaceType
OBJECT-TYPE
Specifies the port type. Copper(1) and fiber(2) are fixed types and NOT configurable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.51INTEGER {copper(1), fiber(2), comboCopper(3), comboFiber(4)}read-writecurrent
esmPortDownReason
OBJECT-TYPE
The port down or violation reason.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.52INTEGER {none(1), adminDown(2), lpsShutdown(3), lpsRestrict(4), policy(5), spoofed(6), bpdu(7), bgp(8), ospf(9), rip(10), vrrp(11), dhcpServer(12), pim(13), isis(14), dnsReply(15), udld(16), rfp(17), lpsDiscard(18), lfpShutdown(19), lmThreshold(20), lbdShutdown(21), dvmrp(22), spbRfp(23), storm(24), reserved(25), lldpShutdown(26), lbdRemote(27), anNotComplete(28), noRxSignal(29), localOrRemoteFault(30)}read-onlycurrent
esmPortMacsecSupported
OBJECT-TYPE
The port has macsec supported (yes) or not (no).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.53INTEGER {yes(1), no(2)}read-onlycurrent
esmPortMacsec256bit
OBJECT-TYPE
The port has macsec 256 bit (yes) or not (no).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.54INTEGER {yes(1), no(2)}read-onlycurrent
esmPortMacsecXpn
OBJECT-TYPE
The port has macsec xpn (yes) or not (no).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.55INTEGER {yes(1), no(2)}read-onlycurrent
esmPortReset
OBJECT-TYPE
The port reset.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.56INTEGER {default(1), reset(2)}read-writecurrent
alcetherStatsTable
OBJECT-TYPE
A list of Ethernet statistics entries.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2not-accessiblecurrent
alcetherStatsEntry
OBJECT-TYPE
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1not-accessiblecurrent
alcetherClearStats
OBJECT-TYPE
Used to Clear all Statistics counters. By default, this object contains zero value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.1INTEGER {default(0), reset(1)}read-writecurrent
alcetherLastClearStats
OBJECT-TYPE
The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.2TimeTicksread-onlycurrent
alcetherStatsCRCAlignErrors
OBJECT-TYPE
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.3Counter64read-onlycurrent
alcetherStatsRxUndersizePkts
OBJECT-TYPE
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.4Counter64read-onlycurrent
alcetherStatsTxUndersizePkts
OBJECT-TYPE
The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.5Counter64read-onlycurrent
alcetherStatsTxOversizePkts
OBJECT-TYPE
The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.6Counter64read-onlycurrent
alcetherStatsRxJabbers
OBJECT-TYPE
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.7Counter64read-onlycurrent
alcetherStatsRxCollisions
OBJECT-TYPE
The best estimate of the total number of collisions on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.8Counter64read-onlycurrent
alcetherStatsTxCollisions
OBJECT-TYPE
The best estimate of the total number of collisions on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.9Counter64read-onlycurrent
alcetherStatsPkts64Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.10Counter64read-onlycurrent
alcetherStatsPkts65to127Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.11Counter64read-onlycurrent
alcetherStatsPkts128to255Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.12Counter64read-onlycurrent
alcetherStatsPkts256to511Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.13Counter64read-onlycurrent
alcetherStatsPkts512to1023Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.14Counter64read-onlycurrent
alcetherStatsPkts1024to1518Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). For both Ethernet and GigaEthernet.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.15Counter64read-onlycurrent
gigaEtherStatsPkts1519to4095Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.16Counter64read-onlycurrent
gigaEtherStatsPkts4096to9215Octets
OBJECT-TYPE
The total number of packets (including bad packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.17Counter64read-onlycurrent
alcetherStatsPkts1519to2047Octets
OBJECT-TYPE
The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.18Counter64read-onlycurrent
alcetherStatsPkts2048to4095Octets
OBJECT-TYPE
The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.19Counter64read-onlycurrent
alcetherStatsPkts4096Octets
OBJECT-TYPE
The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.20Counter64read-onlycurrent
alcetherStatsRxGiantPkts
OBJECT-TYPE
The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.21Counter64read-onlycurrent
alcetherStatsRxDribbleNibblePkts
OBJECT-TYPE
The total number of frames for which a dribble nibble has been received and CRC is correct.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.22Counter64read-onlycurrent
alcetherStatsRxLongEventPkts
OBJECT-TYPE
The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.23Counter64read-onlycurrent
alcetherStatsRxVlanTagPkts
OBJECT-TYPE
The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.24Counter64read-onlycurrent
alcetherStatsRxControlPkts
OBJECT-TYPE
The total number of frames that were recognized as control frames.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.25Counter64read-onlycurrent
alcetherStatsRxLenChkErrPkts
OBJECT-TYPE
The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.26Counter64read-onlycurrent
alcetherStatsRxCodeErrPkts
OBJECT-TYPE
The total number of frames for which one or more nibbles were signaled as errors during reception of the frame.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.27Counter64read-onlycurrent
alcetherStatsRxDvEventPkts
OBJECT-TYPE
The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.28Counter64read-onlycurrent
alcetherStatsRxPrevPktDropped
OBJECT-TYPE
The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.29Counter64read-onlycurrent
alcetherStatsTx64Octets
OBJECT-TYPE
The total number of transmitted frames of 64 bytes.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.30Counter64read-onlycurrent
alcetherStatsTx65to127Octets
OBJECT-TYPE
The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.31Counter64read-onlycurrent
alcetherStatsTx128to255Octets
OBJECT-TYPE
The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.32Counter64read-onlycurrent
alcetherStatsTx256to511Octets
OBJECT-TYPE
The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.33Counter64read-onlycurrent
alcetherStatsTx512to1023Octets
OBJECT-TYPE
The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.34Counter64read-onlycurrent
alcetherStatsTx1024to1518Octets
OBJECT-TYPE
The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.35Counter64read-onlycurrent
alcetherStatsTx1519to2047Octets
OBJECT-TYPE
The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.36Counter64read-onlycurrent
alcetherStatsTx2048to4095Octets
OBJECT-TYPE
The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.37Counter64read-onlycurrent
alcetherStatsTx4096Octets
OBJECT-TYPE
The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.38Counter64read-onlycurrent
alcetherStatsTxRetryCount
OBJECT-TYPE
The total number of collisions that the frames faced during transmission attempts.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.39Counter64read-onlycurrent
alcetherStatsTxVlanTagPkts
OBJECT-TYPE
The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.40Counter64read-onlycurrent
alcetherStatsTxControlPkts
OBJECT-TYPE
The total number of transmitted frames that were recognised as control frames.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.41Counter64read-onlycurrent
alcetherStatsTxLatePkts
OBJECT-TYPE
The total number of late collisions that occured beyond the collision window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.42Counter64read-onlycurrent
alcetherStatsTxTotalBytesOnWire
OBJECT-TYPE
The total number of bytes transmitted on wire, including all bytes from collided attempts.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.43Counter64read-onlycurrent
alcetherStatsTxLenChkErrPkts
OBJECT-TYPE
The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a Type field.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.44Counter64read-onlycurrent
alcetherStatsTxExcDeferPkts
OBJECT-TYPE
The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.45Counter64read-onlycurrent
esmHybridConfTable
OBJECT-TYPE
A list of inactive hybrid port instances.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3not-accessiblecurrent
esmHybridConfEntry
OBJECT-TYPE
A ESM Physical Port entry.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1not-accessiblecurrent
esmHybridPortCfgSpeed
OBJECT-TYPE
The configured port line speed of this ESM port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.1INTEGER {speed100(1), speed10(2), speedAuto(3), speed1000(5), speed10000(6), speedMax100(8), speedMax1000(9)}read-writecurrent
esmHybridPortCfgDuplexMode
OBJECT-TYPE
The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.2INTEGER {fullDuplex(1), halfDuplex(2), autoDuplex(3)}read-writecurrent
esmHybridPortCfgAutoNegotiation
OBJECT-TYPE
Allow the user to enable or disable the port auto negotiation.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.3INTEGER {enable(1), disable(2)}read-writecurrent
esmHybridPortCfgCrossover
OBJECT-TYPE
Allow the user to configure port crossover.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.4INTEGER {mdi(1), mdix(2), auto(3)}read-writecurrent
esmHybridPortCfgFlow
OBJECT-TYPE
This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber media.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.5INTEGER {disable(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4)}read-writecurrent
esmHybridPortCfgInactiveType
OBJECT-TYPE
This object is only applicable to hybrid ports . It indicates the configured inactive media type.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.6INTEGER {fiber(1), copper(2)}read-onlycurrent
ddmInfoTable
OBJECT-TYPE
The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5not-accessibledeprecated
ddmInfoEntry
OBJECT-TYPE
Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1not-accessiblecurrent
ddmTemperature
OBJECT-TYPE
The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.1Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmTempLowWarning
OBJECT-TYPE
The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.2Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmTempLowAlarm
OBJECT-TYPE
The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.3Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmTempHiWarning
OBJECT-TYPE
The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.4Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmTempHiAlarm
OBJECT-TYPE
The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.5Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmSupplyVoltage
OBJECT-TYPE
The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.6Integer32 (-200000 | 0..10000)read-onlycurrent
ddmSupplyVoltageLowWarning
OBJECT-TYPE
The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.7Integer32 (-200000 | 0..10000)read-onlycurrent
ddmSupplyVoltageLowAlarm
OBJECT-TYPE
The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.8Integer32 (-200000 | 0..10000)read-onlycurrent
ddmSupplyVoltageHiWarning
OBJECT-TYPE
The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.9Integer32 (-200000 | 0..10000)read-onlycurrent
ddmSupplyVoltageHiAlarm
OBJECT-TYPE
The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.10Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxBiasCurrent
OBJECT-TYPE
The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.11Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxBiasCurrentLowWarning
OBJECT-TYPE
The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.12Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxBiasCurrentLowAlarm
OBJECT-TYPE
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.13Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxBiasCurrentHiWarning
OBJECT-TYPE
The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.14Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxBiasCurrentHiAlarm
OBJECT-TYPE
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.15Integer32 (-200000 | 0..10000)read-onlycurrent
ddmTxOutputPower
OBJECT-TYPE
The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.16Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmTxOutputPowerLowWarning
OBJECT-TYPE
The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.17Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmTxOutputPowerLowAlarm
OBJECT-TYPE
The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.18Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmTxOutputPowerHiWarning
OBJECT-TYPE
The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.19Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmTxOutputPowerHiAlarm
OBJECT-TYPE
The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.20Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmRxOpticalPower
OBJECT-TYPE
The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.21Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmRxOpticalPowerLowWarning
OBJECT-TYPE
The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.22Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmRxOpticalPowerLowAlarm
OBJECT-TYPE
The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.23Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmRxOpticalPowerHiWarning
OBJECT-TYPE
The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.24Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmRxOpticalPowerHiAlarm
OBJECT-TYPE
The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.25Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortInfoTable
OBJECT-TYPE
The ddmPortInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex and port channel. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6not-accessiblecurrent
ddmPortInfoEntry
OBJECT-TYPE
Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1not-accessiblecurrent
ddmPortChannel
OBJECT-TYPE
The channel number of the data that is being read. In the case of a QSFP there will be 4 10 gigabyte channels, for SFP/XFP there will only be one.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.1Integer32 (1..4)read-onlycurrent
ddmPortTemperature
OBJECT-TYPE
The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.2Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmPortTempLowWarning
OBJECT-TYPE
The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.3Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmPortTempLowAlarm
OBJECT-TYPE
The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.4Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmPortTempHiWarning
OBJECT-TYPE
The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.5Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmPortTempHiAlarm
OBJECT-TYPE
The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.6Integer32 (-200000 | -150000..150000)read-onlycurrent
ddmPortSupplyVoltage
OBJECT-TYPE
The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.7Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortSupplyVoltageLowWarning
OBJECT-TYPE
The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.8Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortSupplyVoltageLowAlarm
OBJECT-TYPE
The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.9Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortSupplyVoltageHiWarning
OBJECT-TYPE
The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.10Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortSupplyVoltageHiAlarm
OBJECT-TYPE
The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.11Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxBiasCurrent
OBJECT-TYPE
The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.12Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxBiasCurrentLowWarning
OBJECT-TYPE
The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.13Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxBiasCurrentLowAlarm
OBJECT-TYPE
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.14Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxBiasCurrentHiWarning
OBJECT-TYPE
The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.15Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxBiasCurrentHiAlarm
OBJECT-TYPE
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.16Integer32 (-200000 | 0..10000)read-onlycurrent
ddmPortTxOutputPower
OBJECT-TYPE
The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.17Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortTxOutputPowerLowWarning
OBJECT-TYPE
The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.18Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortTxOutputPowerLowAlarm
OBJECT-TYPE
The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.19Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortTxOutputPowerHiWarning
OBJECT-TYPE
The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.20Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortTxOutputPowerHiAlarm
OBJECT-TYPE
The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.21Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortRxOpticalPower
OBJECT-TYPE
The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.22Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortRxOpticalPowerLowWarning
OBJECT-TYPE
The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.23Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortRxOpticalPowerLowAlarm
OBJECT-TYPE
The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.24Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortRxOpticalPowerHiWarning
OBJECT-TYPE
The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.25Integer32 (-200000 | -40000..10000)read-onlycurrent
ddmPortRxOpticalPowerHiAlarm
OBJECT-TYPE
The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.26Integer32 (-200000 | -40000..10000)read-onlycurrent
alcfcStatsTable
OBJECT-TYPE
A list of Fiber Channel statistics entries.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7not-accessiblecurrent
alcfcStatsEntry
OBJECT-TYPE
A collection of statistics kept for a particular Fiber Channel interface. As an example, an instance of the fcStatsPkts object might be named alcfcStatsPkts.1
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1not-accessiblecurrent
alcfcClearStats
OBJECT-TYPE
Used to Clear all Statistics counters. By default, this object contains zero value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.1INTEGER {default(0), reset(1)}read-writecurrent
alcfcLastClearStats
OBJECT-TYPE
The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.2TimeTicksread-onlycurrent
alcfcStatsRxUndersizePkts
OBJECT-TYPE
The total number of packets received that were less than 36 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.3Counter64read-onlycurrent
alcfcStatsTxBBCreditZeros
OBJECT-TYPE
The number of transitions in/out of the buffer-to-buffer credit zero state.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.6Counter64read-onlycurrent
alcfcStatsRxBBCreditZeros
OBJECT-TYPE
The number of times RX BBCredit drops to zero.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.7Counter64read-onlycurrent
alcfcStatsLinkFailures
OBJECT-TYPE
The number of link failures.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.8Counter64read-onlycurrent
alcfcStatsLossofSynchs
OBJECT-TYPE
The number of loss of word-sync detected.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.9Counter64read-onlycurrent
alcfcStatsLossofSignals
OBJECT-TYPE
The number of loss of signals detected.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.10Counter64read-onlycurrent
alcfcStatsPrimSeqProtocolErrors
OBJECT-TYPE
The number of primitive sequence protocol errors detected.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.11Counter64read-onlycurrent
alcfcStatsInvalidTxWords
OBJECT-TYPE
The number of invalid transmission words. This includes invalid ordered sets and invalid data words.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.12Counter64read-onlycurrent
alcfcStatsInvalidCRCs
OBJECT-TYPE
The number of frames received with an invalid CRC.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.13Counter64read-onlycurrent
alcfcStatsInvalidOrderedSets
OBJECT-TYPE
The number of invalid ordered sets received at this port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.14Counter64read-onlycurrent
alcfcStatsFrameTooLongs
OBJECT-TYPE
The number of frames received at this port for which the frame length was greater than what was agreed to in FLOGI/PLOGI.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.15Counter64read-onlycurrent
alcfcStatsDelimiterErrors
OBJECT-TYPE
The number of invalid delimiters received
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.16Counter64read-onlycurrent
alcfcStatsEncodingDisparityErrors
OBJECT-TYPE
The number of detected running disparity at 10b/8b level.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.17Counter64read-onlycurrent
alcfcStatsOtherErrors
OBJECT-TYPE
The number of errors detected but not counted by any other error counter. This only includes RX frames drops due to zero RX BBCredits
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.18Counter64read-onlycurrent
esmTdrPortTable
OBJECT-TYPE
The table lists the results of cable diagnostics.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8not-accessiblecurrent
esmTdrPortEntry
OBJECT-TYPE
An entry corresponding to each port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1not-accessiblecurrent
esmTdrPortCableState
OBJECT-TYPE
State of a cable as returned by the TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.1CableStateread-onlycurrent
esmTdrPortValidPairs
OBJECT-TYPE
The number of wire pairs in the cable for which the results of this test are valid.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.2Unsigned32read-onlycurrent
esmTdrPortPair1State
OBJECT-TYPE
The state for wire pair-1 of the cable as returned by the TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.3CableStateread-onlycurrent
esmTdrPortPair1Length
OBJECT-TYPE
The length for wire pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.4Unsigned32read-onlycurrent
esmTdrPortPair2State
OBJECT-TYPE
The state for wire pair-2 of the cable as returned by the TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.5CableStateread-onlycurrent
esmTdrPortPair2Length
OBJECT-TYPE
The length for wire pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.6Unsigned32read-onlycurrent
esmTdrPortPair3State
OBJECT-TYPE
The state for wire pair-3 of the cable as returned by the TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.7CableStateread-onlycurrent
esmTdrPortPair3Length
OBJECT-TYPE
The length for wire pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.8Unsigned32read-onlycurrent
esmTdrPortPair4State
OBJECT-TYPE
The state for wire pair-4 of the cable as returned by the TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.9CableStateread-onlycurrent
esmTdrPortPair4Length
OBJECT-TYPE
The length for wire pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.10Unsigned32read-onlycurrent
esmTdrPortFuzzLength
OBJECT-TYPE
The error in the estimated length of the cable (as returned by TDR test).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.11Unsigned32read-onlycurrent
esmTdrPortTest
OBJECT-TYPE
Object used to start a TDR test on the port. When configured as on, it initiates a TDR test on the port. A read operation on this object always returns the value off.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.12INTEGER {off(1), on(2)}read-writecurrent
esmTdrPortClearStats
OBJECT-TYPE
Used to Clear TDR stats. This MIB object is to trigger a clear of the stats. The value of the object will revert back to default after the action is completed.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.13INTEGER {default(1), reset(2)}read-writecurrent
esmTdrPortResult
OBJECT-TYPE
Used to give the status of BCM API,whether API able to execute TDR test successfully or failed to executethe TDR test.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.14INTEGER {success(1), fail(2), unknown(3)}read-onlycurrent
esmPortModeTable
OBJECT-TYPE
A list of interface entries. This table contains Configured Port mode and operational port mode
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9not-accessiblecurrent
esmPortModeEntry
OBJECT-TYPE
An entry containing additional management information applicable to a particular interface with respect to port mode
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1not-accessiblecurrent
esmConfiguredMode
OBJECT-TYPE
The desired mode of the interface. When a managed system initializes, all interfaces start with ifConfiguredMode in the Auto state. User is not allowed to configure this parameter for subport
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.1INTEGER {mode40Gig(1), mode4X10Gig(2), modeAuto(3), mode100Gig(4), mode4X25Gig(5), mode2X50Gig(6)}read-writecurrent
esmOperationalMode
OBJECT-TYPE
Operational mode of the port
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.2INTEGER {mode40Gig(1), mode4X10Gig(2), mode100Gig(3), mode4X25Gig(4), mode2X50Gig(5), modeUnknown(6)}read-onlycurrent
startPortModeIfIndex
OBJECT-TYPE
The start IfIndex of the port that is part of same Port Mode group
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.3InterfaceIndexread-onlycurrent
endPortModeIfIndex
OBJECT-TYPE
The end IfIndex of the port that is part of same Port Mode group
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.4InterfaceIndexread-onlycurrent
esmPortBeaconTable
OBJECT-TYPE
A list of interface entries. This table contains Beacon Admin State Beacon Led Color and Beacon Led mode
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10not-accessiblecurrent
esmPortBeaconEntry
OBJECT-TYPE
An entry containing additional management information applicable to a particular interface with respect to Beacon
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1not-accessiblecurrent
esmBeaconAdminState
OBJECT-TYPE
The beacon admin state of the interface. When a managed system initializes, all interfaces start with esmBeaconAdminState in disable state
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.1INTEGER {enable(1), disable(2)}read-createcurrent
esmBeaconLedColor
OBJECT-TYPE
Beacon Led Color of the port
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.2INTEGER {ledOff(1), ledBlue(2), ledGreen(3), ledAqua(4), ledRed(5), ledMagenta(6), ledYellow(7), ledWhite(8)}read-createcurrent
esmBeaconLedMode
OBJECT-TYPE
Beacon Led Mode of the port
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.3INTEGER {ledModeSolid(1), ledModeActivity(2)}read-createcurrent
esmBeaconRowStatus
OBJECT-TYPE
Row status to control creation/deletion of the Beacon
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.4RowStatusread-createcurrent
esmPortGroupTable
OBJECT-TYPE
A list of port group entries. This table contains Configured Port group speed and Operational Port group speed
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11not-accessiblecurrent
esmPortGroupEntry
OBJECT-TYPE
An entry containing configured and operational port group speed applicable to a particular port group and list of member port
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1not-accessiblecurrent
esmPortGroupIfIndex
OBJECT-TYPE
The port group ifIndex component of this instance.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.1Unsigned32not-accessiblecurrent
esmConfiguredPortGroupSpeed
OBJECT-TYPE
The desired speed of the port group. When a managed system initializes, all portgroup start with esmConfiguredPortGroupSpeed in the Auto state
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.2INTEGER {speedAuto(1), speed10Gig(2), speed25Gig(3)}read-writecurrent
esmOperationalPortGroupSpeed
OBJECT-TYPE
Operational port group speed
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.3INTEGER {speedNone(1), speed10Gig(2), speed25Gig(3)}read-onlycurrent
esmPortBreakOutTable
OBJECT-TYPE
A list of port group entries. This table contains port break out.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12not-accessiblecurrent
esmPortBreakOutEntry
OBJECT-TYPE
An entry containing configured and operational port break out applicable to a particular port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12.1not-accessiblecurrent
esmPortBreakOutEnable
OBJECT-TYPE
Enable or disable port break out.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12.1.1INTEGER {enable(1), disable(2)}read-writecurrent
ddmConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4
ddmConfig
OBJECT-TYPE
This object enables/disables DDM software feature in the system.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.1INTEGER {enable(1), disable(2)}read-writecurrent
ddmTrapConfig
OBJECT-TYPE
This objects enables/disables traps for DDM warning/alarm threshold violations.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.2INTEGER {enable(1), disable(2)}read-writecurrent
ddmNotificationType
OBJECT-TYPE
This object defines the trap type for monitored DDM parameters.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.3INTEGER {clearViolation(1), highAlarm(2), highWarning(3), lowWarning(4), lowAlarm(5)}accessible-for-notifycurrent
portViolations
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5
portViolationTable
OBJECT-TYPE
This table contains the port Violations per port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1not-accessiblecurrent
portViolationEntry
OBJECT-TYPE
Port Violation Entry. The entries in this table are indexed by 3 units, 1. ifIndex of the port for which the violation is set 2. source of the violation, the feature or module 3. reason for the violation (sub reason under each source).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1not-accessiblecurrent
portViolationIfIndex
OBJECT-TYPE
The IfIndex of the port that has a violation.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.1InterfaceIndexnot-accessiblecurrent
portViolationSource
OBJECT-TYPE
Indicates the source of the port violation. The source is the feature or module that has caused the violation. The list is given below 1. Initiated by Access Guardian 2. Initiated by QOS Policy 3. Initiated by Net Sec 4. Initiated by UDLD 5. Initiated by NI supervison (Fabric Stability). 6. initiated by OAM 8. initiated by LFP 9. initiated by Link Monitor 10. initiated by LBD 11. initiated by SPB 12. initiated by ESM 13. initiated by ESM 14. initiated by LLDP When there is no value the value of this will be 0
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.2INTEGER {ag(1), qos(2), netsec(3), udld(4), nisup(5), oam(6), lfp(8), lm(9), lbd(10), spb(11), storm(12), stormuucast(13), lldp(14)}accessible-for-notifycurrent
portViolationReason
OBJECT-TYPE
The Reason for the port violation. This will be application specific. The Reason indicate the violation for the 1st Violation that happened on this port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.3INTEGER {pvSLLpsShutDown(1), pvSLLpsRestrict(2), pvQosPolicy(3), pvQosSpoofed(4), pvQosBpdu(5), pvQosBgp(6), pvQosOspf(7), pvQosRip(8), pvQosVrrp(9), pvQosDhcp(10), pvQosPim(11), pvQosIsis(12), pvQosDnsReply(13), pvUdld(14), pvOamRfp(15), pvAgLpsDiscard(16), pvLfpShutDown(17), pvLmThreshold(18), pvLbd(19), pvQosDvmrp(20), pvSpbRfp(21), pvEsmStorm(22), pvEsmStormUucast(23), pvLldpShutDown(24), pvRemoteLbd(25)}accessible-for-notifycurrent
portViolationAction
OBJECT-TYPE
The action determines on violation, what action will taken. Either the port would be shutdown or Admin Down or wait for the timer to expire and the timerAction will determine what needs to be done.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.4INTEGER {portDown(1), portAdminDown(2), portTimerDown(3), portTimerAdminDown(4)}read-onlycurrent
portViolationTimer
OBJECT-TYPE
If any timer is associated with the violation This is Zero if no timer is associated.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.5TimeTicksread-onlycurrent
portViolationTimerAction
OBJECT-TYPE
The Timer related action. If set to portDownAfterTimer, no operation will be performed on the port and the port will be shutdown after timer expiry. If set to portUpAfterTimer the port will be shutdown immediately and after the timer expiry the port will brought up..
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.6INTEGER {portNoTimerAction(0), portDownAfterTimer(1), portUpAfterTimer(2)}read-onlycurrent
portViolationClearPort
OBJECT-TYPE
When this MIB object is set all violation on the given port will be cleared. The Indices portViolationSource and portViolationReason should be set to 0
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.7INTEGER {inactive(0), set(1)}read-writecurrent
portViolationCfgRecoveryMax
OBJECT-TYPE
The maximum attempts for auto-recovery as configured for the ifindex in alaPvrRecoveryMax. Value 0 means auto recovery is disabled for this port. Value -1 means auto recovery will retry infinitely.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.8Integer32 (-1..50)read-onlycurrent
portViolationCfgRetryTime
OBJECT-TYPE
The time (in seconds) between auto-recovery attempts as configured for the ifindex in alaPvrRetryTime.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.9Integer32 (30..600)read-onlycurrent
portViolationRetryRemain
OBJECT-TYPE
The number of remaining auto-recovery attempts. Value -1 means there are infinite retries remaining.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.10Integer32read-onlycurrent
alaLinkMonConfigTable
OBJECT-TYPE
A list of Link Monitoring Configuration Parameters
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2not-accessiblecurrent
alaLinkMonConfigEntry
OBJECT-TYPE
A collection of Link Monitoring configurations kept for a particular Ethernet interface.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1not-accessiblecurrent
alaLinkMonStatus
OBJECT-TYPE
Allows the user to enable or disable Link Monitoring on the port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.1INTEGER {enable(1), disable(2)}read-writecurrent
alaLinkMonTimeWindow
OBJECT-TYPE
Indicates the number of seconds the Link will be monitored for a port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.2Integer32 (10..3600)read-writecurrent
alaLinkMonLinkFlapThreshold
OBJECT-TYPE
Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.3Integer32 (2..10)read-writecurrent
alaLinkMonLinkErrorThreshold
OBJECT-TYPE
Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.4Integer32 (1..100)read-writecurrent
alaLinkMonWaitToRestoreTimer
OBJECT-TYPE
Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.5Integer32 (0..300)read-writecurrent
alaLinkMonWaitToShutdownTimer
OBJECT-TYPE
Indicates the number of milli seconds after which the link down event is notified to other applications. The timer is started whenever a Link down is detected on a port being monitored.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.6Integer32 (0..300000)read-writecurrent
alaLinkMonStatsTable
OBJECT-TYPE
A list of Link Monitoring Statistics
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3not-accessiblecurrent
alaLinkMonStatsEntry
OBJECT-TYPE
A collection of Link Monitoring statistics for a particular Ethernet interface.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1not-accessiblecurrent
alaLinkMonStatsClearStats
OBJECT-TYPE
Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.1INTEGER {default(1), reset(2)}read-writecurrent
alaLinkMonStatsPortState
OBJECT-TYPE
Indicates the status of the port. up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown because of excessive link flaps or link errors.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.2INTEGER {up(1), down(2), shutdown(3)}read-onlycurrent
alaLinkMonStatsCurrentLinkFlaps
OBJECT-TYPE
Indicates the number of Link flaps in the current time window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.3Counter64read-onlycurrent
alaLinkMonStatsCurrentErrorFrames
OBJECT-TYPE
Indicates the number of error frames in the current time window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.4Counter64read-onlycurrent
alaLinkMonStatsCurrentCRCErrors
OBJECT-TYPE
Indicates the number of CRC errors in the current time window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.5Counter64read-onlycurrent
alaLinkMonStatsCurrentLostFrames
OBJECT-TYPE
Indicates the number of Rx Lost frames in the current time window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.6Counter64read-onlycurrent
alaLinkMonStatsCurrentAlignErrors
OBJECT-TYPE
Indicates the number of Rx alignment frames in the current time window.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.7Counter64read-onlycurrent
alaLinkMonStatsCurrentLinkErrors
OBJECT-TYPE
Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.8Counter64read-onlycurrent
alaLinkMonStatsTotalLinkFlaps
OBJECT-TYPE
Indicates the total number of link flaps across all the time windows.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.9Counter64read-onlycurrent
alaLinkMonStatsTotalLinkErrors
OBJECT-TYPE
Indicates the total number of link errors across all the time windows.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.10Counter64read-onlycurrent
alaLFPGroupTable
OBJECT-TYPE
A list of Link Fault Propagation Grooups and their status
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4not-accessiblecurrent
alaLFPGroupEntry
OBJECT-TYPE
The list of Link Fault Propagation group id and status for each group
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1not-accessiblecurrent
alaLFPGroupId
OBJECT-TYPE
Indicates the unique group id for Link Fault Propagation (LFP).
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.1Integer32 (1..8)accessible-for-notifycurrent
alaLFPGroupAdminStatus
OBJECT-TYPE
Indicates the admin status of the group. disable(2) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.2INTEGER {enable(1), disable(2)}read-createcurrent
alaLFPGroupOperStatus
OBJECT-TYPE
Indicates the operational status of the group. down(2) means all the source ports are down, up(1) means atleast one source port in the group is up.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.3INTEGER {up(1), down(2)}read-onlycurrent
alaLFPGroupWaitToShutdown
OBJECT-TYPE
0 - Disable wait to shutdown timer 5 - 300 - after expiry of this timer all destination ports will be shutdown
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.4Integer32 (0..300)read-createcurrent
alaLFPGroupRowStatus
OBJECT-TYPE
Row Status for initiating a MIB retrieval request.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.5RowStatusread-createcurrent
alaLFPConfigTable
OBJECT-TYPE
A list of Link Fault Propagation port and port type of each LFP group
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5not-accessiblecurrent
alaLFPConfigEntry
OBJECT-TYPE
A list of Link Fault Propagation port and port type of each LFP group
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1not-accessiblecurrent
alaLFPConfigPort
OBJECT-TYPE
Indicates ifindex of source/destination port for a LFP Group.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.1InterfaceIndexaccessible-for-notifycurrent
alaLFPConfigPortType
OBJECT-TYPE
Indicates the type of port, (1) means the port is destination port and (2) means the port is a destination port for a LFP Group.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.2INTEGER {destination(1), source(2)}read-createcurrent
alaLFPConfigRowStatus
OBJECT-TYPE
Row Status for initiating a MIB retrieval request.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.3RowStatusread-createcurrent
alaPvrGlobalConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6
alaPvrGlobalRecoveryMax
OBJECT-TYPE
Auto violation recovery maximum attempts. Value 0 means auto recovery is disabled for any ports using this global value. Value -1 means auto recovery will retry infinitely for any ports using this global value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.1Integer32 (-1..50)read-writecurrent
alaPvrGlobalRetryTime
OBJECT-TYPE
Time (in seconds) between auto violation recovery attempts for any ports using this global value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.2Integer32 (30..600)read-writecurrent
alaPvrGlobalTrapEnable
OBJECT-TYPE
Auto violation recovery global trap configuration
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.3INTEGER {enable(1), disable(2)}read-writecurrent
alaPvrConfigTable
OBJECT-TYPE
A list of auto violation recovery configuration parameters
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7not-accessiblecurrent
alaPvrConfigEntry
OBJECT-TYPE
Auto violation recovery configuration parameters
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1not-accessiblecurrent
alaPvrRecoveryMax
OBJECT-TYPE
Per port maximum auto violation recovery maximum attempts. Value -2 means use value from alaPvrGlobalRecoveryMax Value -1 means retry infinitely. Value 0 means disable this port. Values 1 to 50 mean 1 to 50 auto violation recovery attempts.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.1Integer32 (-2..50)read-writecurrent
alaPvrRetryTime
OBJECT-TYPE
Per port time (in seconds) between auto violation recovery attempts. Value -2 means use value from alaPvrGlobalRetryTime.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.2Integer32 (-2 | 30..600)read-writecurrent
alaPortViolationTrapObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.8
portViolationRecoveryReason
OBJECT-TYPE
The reason for the recovery from port violation. It can be none (1): none. clearViolationCmd (2): Indicates that the port is recovered from clear violation command. recoveryTimer (3): Indicates that the port is recovered by Recovery Timer mechanism. adminUpDown (4): Indicates that the port is recovered from admin Up/Down. nativeRecoveryTimer (5): Indicates that the port is recovered from the feature that shutdown the interface.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.8.1INTEGER {unknown(1), clearViolationCmd(2), recoveryTimer(3), adminUpDown(4), nativeRecoveryTimer(5)}accessible-for-notifycurrent
csmConfTrap
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6
alaDyingGaspChassisId
OBJECT-TYPE
This object specifies the chassis id of the chassis whose NI is going down.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.1Integer32accessible-for-notifycurrent
alaDyingGaspPowerSupplyType
OBJECT-TYPE
This object specifies the type of the power supply.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.2INTEGER {primary(1), backup(2), saps(3), all(4)}accessible-for-notifycurrent
alaDyingGaspTime
OBJECT-TYPE
This object specifies the time (in UTC) of power failure.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.3DateAndTimeaccessible-for-notifycurrent
interfaceCounters
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7
interfaceStatsTable
OBJECT-TYPE
Expansion for ifEntry.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1not-accessiblecurrent
interfaceStatsEntry
OBJECT-TYPE
An entry of interfaceStatsTable
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1not-accessiblecurrent
inBitsPerSec
OBJECT-TYPE
The average number of Bits Received per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.1Counter64read-onlycurrent
outBitsPerSec
OBJECT-TYPE
The average number of Bits Transmitted per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.2Counter64read-onlycurrent
ifInPauseFrames
OBJECT-TYPE
The average number of Pause Frames Received per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.3Counter64read-onlycurrent
ifOutPauseFrames
OBJECT-TYPE
The average number of Pause Frames Transmitted per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.4Counter64read-onlycurrent
ifInPktsPerSec
OBJECT-TYPE
The average number of Packet Received per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.5Counter64read-onlycurrent
ifOutPktsPerSec
OBJECT-TYPE
The average number of Packets Transmitted per second
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.6Counter64read-onlycurrent
esmStormTrap
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8
esmStormViolationThresholdNotificationType
OBJECT-TYPE
This type defines the trap genrated by storm control feature for high or low threshold.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8.1INTEGER {clearViolation(1), highAlarm(2), lowAlarm(3)}accessible-for-notifycurrent
esmStormViolationThresholdTrafficType
OBJECT-TYPE
This type defines the traffic for which the trap genrated by storm control feature for high or low threshold.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8.2INTEGER {broadcast(1), multicast(2), uunicast(3)}accessible-for-notifycurrent
linkAggPort
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9
alcLagStatsTable
OBJECT-TYPE
A list of Link Aggregation statistics entries.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1not-accessiblecurrent
alcLagStatsEntry
OBJECT-TYPE
A collection of statistics kept for a particular Link Aggregation interface. alclnkaggAggIndex is defined in alclnkaggAggTable; it is of SYNTAX InterfaceIndex (aka ifIndex) starting at value 40000001 for link agg 1. Index values received outside of the range for link aggregation interfaces will return an error.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1not-accessiblecurrent
alcLagClearStats
OBJECT-TYPE
Used to Clear all Link Aggregation Statistics counters. New stats collection starts immediately. No meaningful read on this object.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1.1INTEGER {none(0), reset(1)}read-writecurrent
alaPtpConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10
alaPtpConfigAdminStatus
OBJECT-TYPE
This object enables/disables PTP software feature in the system.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.1INTEGER {enable(1), disable(2)}read-writecurrent
alaPtpConfigPriority
OBJECT-TYPE
This object use for configure PTP priority.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.2Unsigned32read-writecurrent
alaPtpConfigMode
OBJECT-TYPE
This object denotes the current PTP mode.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.3SnmpAdminString (SIZE(0..32))read-onlycurrent
alaPtpPortTable
OBJECT-TYPE
This table manages PTP port's admin-state.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4not-accessiblecurrent
alaPtpPortEntry
OBJECT-TYPE
An entry containing additional management information applicable to a particular interface with respect to ptp.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4.1not-accessiblecurrent
alaPtpPortAdminStatus
OBJECT-TYPE
this object enables/disables PTP port's admin-state.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4.1.1INTEGER {enable(1), disable(2)}read-writecurrent
alaPtpLoopBackPort1
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.5InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort2
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.6InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort3
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.7InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort4
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.8InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort5
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.9InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort6
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.10InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort7
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.11InterfaceIndexOrZeroread-writecurrent
alaPtpLoopBackPort8
OBJECT-TYPE
This object contain PTP loopback portlist interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.12InterfaceIndexOrZeroread-writecurrent
alaPortXConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11
alaPortXTable
OBJECT-TYPE
This table manages port's additional parameters.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1not-accessiblecurrent
alaPortXEntry
OBJECT-TYPE
An entry containing additional management information applicable to a particular interface.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1.1not-accessiblecurrent
alaPortXLoopbackStatus
OBJECT-TYPE
this object enables/disables port's Loopback status.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
portResetTrap
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12
portResetStartIfIndex
OBJECT-TYPE
Start interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.1InterfaceIndexaccessible-for-notifycurrent
portResetEndIfIndex
OBJECT-TYPE
End interface index.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.2InterfaceIndexaccessible-for-notifycurrent
portResetUserName
OBJECT-TYPE
User name.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.3SnmpAdminString (SIZE(1..63))accessible-for-notifycurrent
portResetErrorWarningDescription
OBJECT-TYPE
Port reset error or warning discription.
1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.4SnmpAdminString (SIZE(1..255))accessible-for-notifycurrent
alcatelIND1PortMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.2
alcatelIND1PortMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1
alcatelIND1PortMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2

Notifications

NameOIDStatus
ddmTemperatureThresholdViolated
NOTIFICATION-TYPE
This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ temperature.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.2current
ddmVoltageThresholdViolated
NOTIFICATION-TYPE
This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ supply voltage.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.3current
ddmCurrentThresholdViolated
NOTIFICATION-TYPE
This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.4current
ddmTxPowerThresholdViolated
NOTIFICATION-TYPE
This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx output power.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.5current
ddmRxPowerThresholdViolated
NOTIFICATION-TYPE
This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.6current
portViolationTrap
NOTIFICATION-TYPE
A Trap will be generated when a port violation occurs. The port violation trap will indicate the source of the violation and the reason for the violation.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.7current
portViolationNotificationTrap
NOTIFICATION-TYPE
A Trap will be generated when a port violation is cleared. This trap will indicate the reason for the recovery from violation.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.8current
alaDyingGaspTrap
NOTIFICATION-TYPE
Dying Gasp trap.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.9current
esmStormThresholdViolationStatus
NOTIFICATION-TYPE
This object notifies management station if User-Port ports gets the ingress traffic inflow above the configured value.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.10current
esmDrvTrapPortReset
NOTIFICATION-TYPE
Port Reset trap.
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.11current

Conformance

NameOIDStatus
esmConfPortCompliance
MODULE-COMPLIANCE
The compliance statement for the configuration of Ethernet ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.1current
alcEtherStatsCompliance
MODULE-COMPLIANCE
The compliance statement for the Statistics of the Ethernet ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.2current
alcLagStatsCompliance
MODULE-COMPLIANCE
The compliance statement for the Statistics of the Link Aggregation ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.3current
esmConfMIBGroup
OBJECT-GROUP
A collection of objects to support the management of global configuration parameters of the Ethernet ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.1current
esmDetectedConfMIBGroup
OBJECT-GROUP
A collection of objects to support the Detected configuration parameters of the Ethernet ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.2current
alcEtherStatsMIBGroup
OBJECT-GROUP
A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.3current
alcPortNotificationGroup
NOTIFICATION-GROUP
The Port MIB Notification Group.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.4current
ddmInfoGroup
OBJECT-GROUP
A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.6current
ddmConfigGroup
OBJECT-GROUP
A collection of objects to allow configuration of DDM and DDM traps.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.7current
ddmNotificationsGroup
NOTIFICATION-GROUP
A collection of notifications used to indicate DDM threshold violations.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.8current
esmConfTrapGroup
OBJECT-GROUP
Partitioned port (separated due to errors).
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.9current
esmHybridConfEntryGroup
OBJECT-GROUP
A list of inactive hybrid port instances.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.10current
esmConfEntryGroup
OBJECT-GROUP
A list of ESM Physical Port instances.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.11current
portViolationEntryGroup
OBJECT-GROUP
This table contains the port Violations per port.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.12current
ddmPortInfoGroup
OBJECT-GROUP
A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.13current
alaLinkMonConfigMIBGroup
OBJECT-GROUP
A collection of objects to support the Link Monitoring Configurations on the ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.14current
alaLinkMonStatsMIBGroup
OBJECT-GROUP
A collection of objects to provide all the statistics related to the Link Monitoring on the ports.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.15current
alaLFPGroupMIBGroup
OBJECT-GROUP
A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.16current
alaLFPConfigMIBGroup
OBJECT-GROUP
A collection of objects to configure a port and port type for a Link Fault Propagation Group.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.17current
csmConfTrapGroup
OBJECT-GROUP
A collection of objects for chassis supervision traps
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.18current
esmTdrPortGroup
OBJECT-GROUP
A collection of objects to provide TDR information
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.19current
alcfcStatsGroup
OBJECT-GROUP
A collection of objects for chassis supervision traps
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.20current
esmPortFiberstatsGroup
OBJECT-GROUP
A collection of objects for chassis supervision traps
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.21current
alaPvrGlobalConfigGroup
OBJECT-GROUP
A collection of global pvr objects
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.22current
esmPortModeGroup
OBJECT-GROUP
A collection of objects for port splitter mode
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.23current
esmPortBeaconGroup
OBJECT-GROUP
A collection of objects for port Beacon
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.24current
alaPvrConfigGroup
OBJECT-GROUP
A collection of pvr objects
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.25current
interfaceStatsMIBGroup
OBJECT-GROUP
A collection of objects to display the interface counters details of the ports
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.26current
alaPortViolationTrapGroup
OBJECT-GROUP
A collection of global pvr objects
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.27current
alcLagStatsMIBGroup
OBJECT-GROUP
A collection of link aggregation objects
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.28current
alaPtpConfigurationGroup
OBJECT-GROUP
A collection of objects to allow configuration of PTP.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.29current
alaPtpPortGroup
OBJECT-GROUP
A collection of objects to allow configuration of PTP.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.30current
alaPortXGroup
OBJECT-GROUP
A collection of objects to allow configuration of additional Port Configuration attributes.
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.31current
esmPortGroupGroup
OBJECT-GROUP
A collection of objects for port Group
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.32current
esmPortBreakOutGroup
OBJECT-GROUP
A collection of objects for port break out
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.33current
esmPortResetGroup
OBJECT-GROUP
A collection of objects for port reset
1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.34current