MIBs Depot

ALCATEL-IND1-OPENFLOW-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.77.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2014-03-26 00:00, 2014-10-08 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-OPENFLOW-MIB
Digest
sha256:4a8c7c7efaef6f62f2e572d1063400ebf9c91fb029fdce7407ecdd0165863abe

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Openflow for OS6900 Product Line. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1OpenflowMIB
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-OPENFLOW-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1OpenflowMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.77.1.0
alcatelIND1OpenflowMIBObjects
OBJECT-IDENTITY
Alcatel-Lucent Openflow Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1current
alaOpenflowGlobalConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1
alaOpenflowGlobalBackoffMax
OBJECT-TYPE
Alcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.1Integer32 (1..60)read-writecurrent
alaOpenflowGlobalIdleProbeTimeout
OBJECT-TYPE
Alcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.2Integer32 (0..60)read-writecurrent
alaOpenflowLogicalSwitchTable
OBJECT-TYPE
This table contains one row for each Logical Switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2not-accessiblecurrent
alaOpenflowLogicalSwitchEntry
OBJECT-TYPE
Information about the Openflow Logical Switches.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1not-accessiblecurrent
alaOpenflowLogicalSwitch
OBJECT-TYPE
Openflow Logical Switch Name.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaOpenflowLogicalSwitchAdminState
OBJECT-TYPE
Logical Switch Admin State. Enable or disable the Logical Switch. When disabled, all controllers for the Logical Switch will be operationally disabled and flows added by those controllers will be removed.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.2INTEGER {enabled(1), disabled(2)}read-createcurrent
alaOpenflowLogicalSwitchMode
OBJECT-TYPE
Openflow Logical Switch Mode. Normal is regular Openflow, API is for ACL-like flow operation. Only one Logical Switch can be in api mode at a time. PFC-Channel mode is to indicate the Logical Switch is operating in NEC mode. This object cannot be modified after the Logical Switch has been created.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.3INTEGER {normal(1), api(2), pfcChannel(3)}read-createcurrent
alaOpenflowLogicalSwitchVersions
OBJECT-TYPE
Openflow Logical Switch Bitmap of enabled Openflow versions. At least one version must be enabled.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.4Bits {v1dot0(0), v1dot3dot1(1)}read-createcurrent
alaOpenflowLogicalSwitchVlan
OBJECT-TYPE
Openflow Logical Switch VLAN. The value 0 indicates that no VLAN has been specified, it is not a valid value to write. This object is not valid to write when creating/modifying an entry with alaOpenflowLogicalSwitchMode api(2)
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.5Integer32 (0 | 2..4093)read-createcurrent
alaOpenflowLogicalSwitchControllerCount
OBJECT-TYPE
Count of the configured controllers for the Logical Switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.6Integer32 (0..3)read-onlycurrent
alaOpenflowLogicalSwitchInterfaceCount
OBJECT-TYPE
Count of the configured interfaces (ports and link aggregations) for the Logical Switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.7Integer32 (0..5000)read-onlycurrent
alaOpenflowLogicalSwitchFlowCount
OBJECT-TYPE
Count of the flows pushed to the Logical Switch by its controllers.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.8Integer32 (0..511)read-onlycurrent
alaOpenflowLogicalSwitchRowStatus
OBJECT-TYPE
Deleting a row from this table will also remove associated entries from other tables in this mib that have a logical switch as part of their index.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.9RowStatusread-createcurrent
alaOpenflowLogicalSwitchLearnedMacUpdate
OBJECT-TYPE
This object is only applicable to Logical Switches in api(2) mode. When enabled(1), learned MACs will be forwarded to controllers via a Packet-In message.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.10INTEGER {enabled(1), disabled(2)}read-createcurrent
alaOpenflowLogicalSwitchProbeTime
OBJECT-TYPE
Probe-time for a logical switch in the pfc-channel mode in seconds, which will override the existing global idle-probe-time for sending echo-request to the OpenFlow Controller.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.11Integer32 (1..60)read-createcurrent
alaOpenflowLogicalSwitchFailureDetectTime
OBJECT-TYPE
Failure detect time, in seconds, is configured for a logical switch in the pfc-channel mode for detecting disconnection to the OpenFlow Controller if there was no echo reply or message from the controller.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.12Integer32 (1..60)read-createcurrent
alaOpenflowLogicalSwitchDPID
OBJECT-TYPE
An unique 8 bytes DPID for a logical switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.13OCTET STRING (SIZE(8))read-createcurrent
alaOpenflowLogicalSwitchTableMissAction
OBJECT-TYPE
The action to be taken when an Openflow Table Miss occurs. When set to drop if any packet has a table miss, it will be dropped. If set to controller it will be forwarded to the controller.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.14INTEGER {drop(1), controller(2)}read-createcurrent
alaOpenflowLogicalSwitchTCPBufferSizeTx
OBJECT-TYPE
TCP send buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers in the logical switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.15Unsigned32 (2..32)read-createcurrent
alaOpenflowLogicalSwitchTCPBufferSizeRx
OBJECT-TYPE
TCP receive buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers in the logical switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.16Unsigned32 (2..32)read-createcurrent
alaOpenflowControllerTable
OBJECT-TYPE
This table contains one row for each controller on each logical switch. Currently, up to three controllers per logical switch are supported per logical switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3not-accessiblecurrent
alaOpenflowControllerEntry
OBJECT-TYPE
Information about the Openflow Controllers attached to Logical Switches. The MAX size available for alaOpenflowControllerIp is 93 because the table index cannot exceed MAX 128 dotted values.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1not-accessiblecurrent
alaOpenflowControllerLogicalSwitch
OBJECT-TYPE
Openflow Logical Switch Name.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaOpenflowControllerIpType
OBJECT-TYPE
Openflow Controller IP Address Type. The only type currently supported is ipv4(1) and fqdn(16)
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.2InetAddressType {ipv4(1), dns(16)}not-accessiblecurrent
alaOpenflowControllerIp
OBJECT-TYPE
Openflow Controller IP Address. As specified by alaOpenflowControllerIpType, only ipv4 is currently supported
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.3InetAddress (SIZE(1..128))not-accessiblecurrent
alaOpenflowControllerPort
OBJECT-TYPE
Openflow Controller Port.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.4Integer32 (1..65535)not-accessiblecurrent
alaOpenflowControllerRole
OBJECT-TYPE
Role of the Controller for the Logical Switch. The role is negotiated by the controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers will always have the role of equal. Only one controller per Logical Switch can have the role of master.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.5INTEGER {equal(1), master(2), slave(3)}read-onlycurrent
alaOpenflowControllerAdminState
OBJECT-TYPE
Controller Admin State. Enable or disable connection to the controller. The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc continues unaffected when the controller is administratively disabled.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.6INTEGER {enabled(1), disabled(2)}read-createcurrent
alaOpenflowControllerOperState
OBJECT-TYPE
State of the Logical Switch connection to the Controller.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.7INTEGER {invalid(1), disabled(2), sendError(3), init(4), connecting(5), backoff(6), exchangingHello(7), active(8), idle(9), disconnected(10)}read-onlycurrent
alaOpenflowControllerRowStatus
OBJECT-TYPE
On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.8RowStatusread-createcurrent
alaOpenflowControllerPriority
OBJECT-TYPE
Openflow Controller Priority. Priority value of 0 implies highest pririoty and 2 implies lowest.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.9Integer32 (0..2)read-createcurrent
alaOpenflowInterfaceTable
OBJECT-TYPE
This table contains one row for each interface (port or link aggregation) assigned to a logical switch. An interface can only belong to one logical switch at a time. If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it; instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch. Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch (by adding it to that normal mode logical switch) but not directly reassigned from one normal mode logical switch to another normal mode logical switch.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4not-accessiblecurrent
alaOpenflowInterfaceEntry
OBJECT-TYPE
Information about the interfaces assigned to Openflow Logical Switches.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1not-accessiblecurrent
alaOpenflowInterfaceLogicalSwitch
OBJECT-TYPE
Openflow Logical Switch Name.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.1SnmpAdminString (SIZE(1..31))not-accessiblecurrent
alaOpenflowInterface
OBJECT-TYPE
Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values, Link Aggregations start at 32769.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.2Integer32 (1..65535)not-accessiblecurrent
alaOpenflowInterfaceMode
OBJECT-TYPE
Openflow Interface Mode. Normal is regular Openflow, API is for ACL like flow operation and PFC-Channel is for NEC OFC.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.3INTEGER {normal(1), api(2), pfcChannel(3)}read-onlycurrent
alaOpenflowInterfaceRowStatus
OBJECT-TYPE
On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.4RowStatusread-createcurrent
alaOpenflowInterfaceType
OBJECT-TYPE
Openflow Interface Type.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.5INTEGER {trunk(1), access(2)}read-createcurrent
alaOpenflowInterfaceNativeVlan
OBJECT-TYPE
Native VLAN for Openflow Interface.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.6Unsigned32 (2..4093)read-createcurrent
alaOpenflowInterfaceVlanTable
OBJECT-TYPE
This table contains a list of Tag VLANs for an OpenFlow Interface (port or link-aggregation) Entry. logical switch belongs to.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5not-accessiblecurrent
alaOpenflowInterfaceVlanEntry
OBJECT-TYPE
Information about the Tag VLANs associated with an OpenFlow Interface.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1not-accessiblecurrent
alaOpenflowInterfaceVlanVlanID
OBJECT-TYPE
Tag VLAN for an Openflow Interface.
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1.1Unsigned32 (0 | 2..4093)not-accessiblecurrent
alaOpenflowInterfaceVlanRowStatus
OBJECT-TYPE
On create, the specified logical switch interface must exist in alaOpenflowInterfaceTable, otherwise an entry creation in this table would not be allowed. Deletion of an interface entry in alaOpenflowInterfaceTable would result in deletion of all entries for that interface in the alaOpenflowInterfaceVlanEntry
1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1.2RowStatusread-createcurrent
alcatelIND1OpenflowMIBConformance
OBJECT-IDENTITY
Alcatel-Lucent Openflow Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2current
alcatelIND1OpenflowMIBGroups
OBJECT-IDENTITY
Branch For ALU Openflow MIB Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1current
alcatelIND1OpenflowMIBCompliances
OBJECT-IDENTITY
Branch For ALU Openflow MIB Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.2current

Conformance

NameOIDStatus
alaOpenflowModuleConfigGroup
OBJECT-GROUP
Openflow Global Configuration Modules Group.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.1current
alaOpenflowModuleLogicalSwitchGroup
OBJECT-GROUP
Openflow Logical Switch Configuration Modules Group.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.2current
alaOpenflowModuleControllerGroup
OBJECT-GROUP
Openflow Controller Configuration Modules Group.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.3current
alaOpenflowModuleInterfaceGroup
OBJECT-GROUP
Openflow Interface Configuration Modules Group.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.4current
alaOpenflowModuleInterfaceVlanGroup
OBJECT-GROUP
Openflow Interface with VLAN Configuration Modules Group.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.5current
alaOpenflowMIBCompliance
MODULE-COMPLIANCE
Compliance statement for Openflow.
1.3.6.1.4.1.6486.801.1.2.1.77.1.2.2.1current