ALCATEL-IND1-ERP-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.46.1
- Last updated
- 2020-06-23 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2019-11-27 00:00, 2010-05-13 00:00, 2008-07-10 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-ERP-MIB- Digest
sha256:3cc0d9cf9938a0c8bae93ad7332e14456a517ff1c0c4576fcae1949cd8146901
Description
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring topologies. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | softentIND1Erp |
| ALCATEL-IND1-SERVICE-MGR-MIB | AluServiceId |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| Q-BRIDGE-MIB | VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-E-SERVICE-MIB ALCATEL-IND1-ERP-MIB ALCATEL-IND1-SERVICE-MGR-MIB ALCATEL-IND1-TIMETRA-CHASSIS-MIB ALCATEL-IND1-TIMETRA-FILTER-MIB ALCATEL-IND1-TIMETRA-GLOBAL-MIB ALCATEL-IND1-TIMETRA-QOS-MIB ALCATEL-IND1-TIMETRA-SAP-MIB ALCATEL-IND1-TIMETRA-SDP-MIB ALCATEL-IND1-TIMETRA-SERV-MIB ALCATEL-IND1-TIMETRA-TC-MIB ATM-TC-MIB BRIDGE-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-TC-STD-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlaErpRingMEGLevel TEXTUAL-CONVENTION MEG level of the R-APS PDU to be inserted. | current | |||
| AlaErpRingMepId TEXTUAL-CONVENTION Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. | current | |||
| AlaErpRingPortStatus TEXTUAL-CONVENTION Indicates the status of the Ring Port. forwarding(1) Status is forwarding. blocking(2) Status is blocking. | current | |||
| AlaErpRingPortType TEXTUAL-CONVENTION Indicates the type of the Ring Port. nonRpl(1) Port is Non-RPL Port. rpl(2) Port is RPL Port. Node is RPL Owner for the Ring. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alcatelIND1ErpMIBNotifications OBJECT-IDENTITY Branch For ERP MIB Subsystem Notifications. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.0 | current | ||
| alcatelIND1ERPMIBObjects OBJECT-IDENTITY Branch For ERP Subsystem Managed Objects. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1 | current | ||
| alaErpGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1 | |||
| alaErpClearStats OBJECT-TYPE Defines the global clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to all the rings in the system. By default, this object contains a zero value. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1.1 | INTEGER {default(0), reset(1)} | read-write | current |
| alaErpRingAttributes OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2 | |||
| alaErpRingTable OBJECT-TYPE There is one ERP Ring table per bridge. It permits the configuration of Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1 | not-accessible | current | |
| alaErpRingEntry OBJECT-TYPE The ERP Ring table entry. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1 | not-accessible | current | |
| alaErpRingId OBJECT-TYPE Ring identifier that is unique in the bridge. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.1 | Integer32 (1..2147483647) | accessible-for-notify | current |
| alaErpRingServiceVid OBJECT-TYPE An integer indicating the VID of Service VLAN. All the ERP control traffic will flow with Service VLAN tag across the ring. This object must be specified while creating a row in this table. Once the row has been created, the value of this object cannot be changed. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.2 | VlanId | read-create | current |
| alaErpRingMEGLevel OBJECT-TYPE MEG level of the R-APS PDU to be inserted for this Ring. This object must be specified while creating a row in this table. Once the row has been created, the value of this object cannot be changed. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.3 | AlaErpRingMEGLevel | read-create | current |
| alaErpRingPort1 OBJECT-TYPE This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. There can be only two ring ports per ring in a bridge. This object must be specified while creating a row in this table. Once the row has been created, the value of this object cannot be changed. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.4 | InterfaceIndex | read-create | current |
| alaErpRingPort2 OBJECT-TYPE This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. In case of sub-ring, this will be zero. And that is the indicator of sub-ring. This object must be specified while creating a row in this table. Once the row has been created, the value of this object cannot be changed. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.5 | InterfaceIndexOrZero | read-create | current |
| alaErpRingStatus OBJECT-TYPE An Integer value indicating the administrative state of the Ring. enabled indicates that the Ring is to function normally, and disabled that it is to cease functioning. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.6 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaErpRingState OBJECT-TYPE The current state of the Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.7 | INTEGER {idle(0), protection(1), init(2), manualSwitch(3), forcedSwitch(4), pending(5)} | read-only | current |
| alaErpRingWaitToRestoreTimer OBJECT-TYPE This object is valid only for RPL Node. This timer is started to prevent frequent operation switch due to an intermittent defect. It may be configured by the operator in 1 minute steps between 0 and 12 minutes. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.8 | Unsigned32 (0..12) | read-create | current |
| alaErpRingGuardTimer OBJECT-TYPE Defines the guard timer value in centiseconds. This timer is started to prevent the ring nodes from receiving outdated R-APS messages. It may be configured by the operator in 10 ms steps between 10 ms to 2 seconds. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.9 | Integer32 (1..200) | read-create | current |
| alaErpRingClearStats OBJECT-TYPE Defines per ring clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to a ring in the system.By default, this object contains a zero value. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.10 | INTEGER {default(0), reset(1)} | read-create | current |
| alaErpRingLastStateChange OBJECT-TYPE The time (SysUpTime) at which the ethernet ring last entered new state. : This object has been deprecated Please refer alaErpRingLastStateChangeStr. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.11 | TimeStamp | read-only | current |
| alaErpRingTimeToRevert OBJECT-TYPE Defines the time left to revert from Pending State to Idle State. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.12 | TimeTicks | read-only | current |
| alaErpRingRowStatus OBJECT-TYPE The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.13 | RowStatus | read-create | current |
| alaErpRingVirtualChannel OBJECT-TYPE A Integer value indicating whether the ring is operating with the Virtual channel enabled or not. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.14 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaErpRingRevertive OBJECT-TYPE A Integer value indicating whether the ring is operating with the revertive mode enabled or not | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.15 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| alaErpRingClearAction OBJECT-TYPE Defines clear action for ERP ring The value reset(1) will give CLEAR action to ERP state machine | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.16 | INTEGER {default(0), reset(1)} | read-create | current |
| alaErpRingActiveVersion OBJECT-TYPE This object indicates active ERP Ring protocol version. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.17 | Unsigned32 (1..2) | read-only | current |
| alaErpRingResetVersionFallback OBJECT-TYPE Resets ERP running protocol | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.18 | INTEGER {default(0), reset(1)} | read-create | current |
| alaErpRingLastStateChangeStr OBJECT-TYPE The time (SysUpTime) at which the ethernet ring last entered new state. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.19 | SnmpAdminString (SIZE(0..255)) | read-only | current |
| alaErpRingPortProfile OBJECT-TYPE Different ERP ring port profiles. Denotes ERP's two ring port types: two bridge ports, two access ports, SAP with SDP uplink, etc. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.20 | INTEGER {bridgePorts(1), accessPorts(2), accessSPB(3)} | read-create | current |
| alaErpRingPort1ServiceVlanTagStatus OBJECT-TYPE This specify whether the ERP service Vlan tagged or untagged in the access network, if the ERP ring port is of access type. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.21 | INTEGER {untagged(1), tagged(2)} | read-create | current |
| alaErpRingPort2ServiceVlanTagStatus OBJECT-TYPE This specify whether the ERP service Vlan tagged or untagged in the access network, if the ERP ring port is of access type. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.22 | INTEGER {untagged(1), tagged(2)} | read-create | current |
| alaErpRingSpbRemoteId OBJECT-TYPE The far-end system mac-address will be used to identify the SPB remote system. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.23 | MacAddress | read-create | current |
| alaErpRingPortTable OBJECT-TYPE There is one ERP Ring Port table per bridge. It permits the configuration of Ring Ports. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2 | not-accessible | current | |
| alaErpRingPortEntry OBJECT-TYPE The ERP Ring Port table entry. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1 | not-accessible | current | |
| alaErpRingPortIfIndex OBJECT-TYPE This object is the interface index of the interface either a bridge port, or an aggregated link within a bridge port, to which ring port is configured. There can be only two ring ports per ring in a bridge. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.1 | InterfaceIndex | not-accessible | current |
| alaErpRingPortStatus OBJECT-TYPE Status of the Ring Port. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.2 | AlaErpRingPortStatus | read-only | current |
| alaErpRingPortType OBJECT-TYPE Type of the Ring Port. To configure a node as a RPL owner for the ring, this object has value of RPL(2). | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.3 | AlaErpRingPortType | read-write | current |
| alaErpRingPortEthOAMEvent OBJECT-TYPE A Boolean indicating whether ERP Ring Port shall take loss of connectivity event from Ethernet OAM. True indicates that the Ring Port is to take events from Ethernet OAM. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.4 | TruthValue | read-write | current |
| alaErpRingPortClearStats OBJECT-TYPE Defines per ring port clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to a ring port in the system.By default, this object contains a zero value. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.5 | INTEGER {default(0), reset(1)} | read-write | current |
| alaErpRingPortRmepId OBJECT-TYPE Identifier of Remote Endpoint. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.6 | AlaErpRingMepId | read-write | current |
| alaErpRingPortVirtualSfMonitor OBJECT-TYPE A Boolean indicating whether ERP Ring Port shall take loss of connectivity event from Virtual SF monitor protocol. True indicates that the Ring Port is to take events from Virtual SF monitor. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.7 | TruthValue | read-write | current |
| alaErpRingPortIsSAPNeighbor OBJECT-TYPE Whether ring port is connected to SAP on BEB Edge | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.8 | TruthValue | read-write | current |
| alaErpRingVlanTable OBJECT-TYPE This table defines the association of VIDs and RingIds. The writable objects in this table need to be persistent upon reboot or restart of a device. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3 | not-accessible | current | |
| alaErpRingVlanEntry OBJECT-TYPE The VLAN table entry. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1 | not-accessible | current | |
| alaErpRingVlanProtectedVid OBJECT-TYPE An integer indicating the VID of Protected VLAN. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.1 | VlanId | not-accessible | current |
| alaErpRingVlanRowStatus OBJECT-TYPE The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.2 | RowStatus | read-create | current |
| alaErpStatsTable OBJECT-TYPE There is one ERP Stats table per bridge. This table contains the statistics for the ERP on per Ring basis. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4 | not-accessible | current | |
| alaErpStatsEntry OBJECT-TYPE The Statistics table entry. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1 | not-accessible | current | |
| alaErpStatsSignalFailPduTx OBJECT-TYPE A count of the number of R-APS (SF) PDUs transmitted on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.1 | Counter32 | read-only | current |
| alaErpStatsSignalFailPduRx OBJECT-TYPE A count of the number of valid R-APS (SF) PDUs received on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.2 | Counter32 | read-only | current |
| alaErpStatsSignalFailPduDrop OBJECT-TYPE A count of the number of valid R-APS (SF) PDUs dropped. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.3 | Counter32 | read-only | current |
| alaErpStatsNoRequestPduTx OBJECT-TYPE A count of the number of R-APS (NR) PDUs transmitted on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.4 | Counter32 | read-only | current |
| alaErpStatsNoRequestPduRx OBJECT-TYPE A count of the number of valid R-APS (NR) PDUs received on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.5 | Counter32 | read-only | current |
| alaErpStatsNoRequestPduDrop OBJECT-TYPE A count of the number of valid R-APS (NR) PDUs dropped. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.6 | Counter32 | read-only | current |
| alaErpStatsRPLBlockPDUTx OBJECT-TYPE A count of the number of R-APS (NR, RB) PDUs transmitted on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.7 | Counter32 | read-only | current |
| alaErpStatsRPLBlockPDURx OBJECT-TYPE A count of the number of valid R-APS (NR, RB) PDUs received on this interface for this Ring. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.8 | Counter32 | read-only | current |
| alaErpStatsRPLBlockPDUDrop OBJECT-TYPE A count of the number of valid R-APS (NR, RB) PDUs dropped. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.9 | Counter32 | read-only | current |
| alaErpStatsPDUErr OBJECT-TYPE A count of the number of error R-APS PDUs received. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.10 | Counter32 | read-only | current |
| alcatelIND1ERPMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2 | |||
| alcatelIND1ERPMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.1 | |||
| alcatelIND1ERPMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| alaErpRingStateChanged NOTIFICATION-TYPE The ERP Ring State has changed to Protection from Idle. Notify the user by raising the Trap. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.0.1 | current |
| alaErpRingMultipleRpl NOTIFICATION-TYPE The trap shall be raised on RPL if there are multiple RPLs detected in the ring. When the RPL node receives the NR (RB) message, this trap is raised. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.0.2 | current |
| alaErpRingRemoved NOTIFICATION-TYPE The trap shall be raised whenever the ring is removed dynamically in Unlike NI Scenario only. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| alcatelIND1ERPMIBCompliance MODULE-COMPLIANCE Compliance statement for ERP. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.1.1 | current |
| alaErpGlobalGroup OBJECT-GROUP Objects for the Global Group. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2.1 | current |
| alaErpRingAttributesGroup OBJECT-GROUP Objects for the Ring Group. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2.2 | current |
| alaErpNotificationGroup NOTIFICATION-GROUP Collection of notifications for ERP. | 1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2.3 | current |