ALCATEL-IND1-DVMRP-MIB
- Registered at
- 1.3.6.1.4.1.6486.801.1.2.1.10.7.1
- Last updated
- 2019-11-27 00:00
- Organization
- ALE USA Inc.
- Revisions
- 2019-11-27 00:00, 2007-04-03 00:00
- Namespace
- alcatel-aos7
- Source file
ALCATEL-IND1-DVMRP-MIB- Digest
sha256:9e417e208592c5b933e9719a4d21c752caa7f884d91ac02c5075206396630544
Description
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This MIB contains management information for Coronado Layer 3 Hardware Routing Engine (HRE) management. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Contact
Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com
Imports
| From | Symbols |
|---|---|
| ALCATEL-IND1-BASE | routingIND1Dvmrp |
| DVMRP-STD-MIB | dvmrpInterfaceEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ALCATEL-IND1-BASE ALCATEL-IND1-DVMRP-MIB DVMRP-STD-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| alcatelIND1DVMRPMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1 | |||
| alaDvmrpGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1 | |||
| alaDvmrpAdminStatus OBJECT-TYPE Administratively enables/disables the DVMRP protocol on this router. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.1 | INTEGER {enable(1), disable(2), unrestrictedEnable(3)} | read-write | current |
| alaDvmrpRouteReportInterval OBJECT-TYPE The Route Report Interval determines how often a router will send its complete routing tables to neighboring routers running DVMRP. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.2 | Integer32 (10..2000) | read-write | current |
| alaDvmrpFlashUpdateInterval OBJECT-TYPE The minimum Flash Update Interval defines how often routing table change messages are sent to neighboring DVMRP routers. Since these messages are sent between the transmission of complete routing tables, the flash update interval value must be shorter than that of the route report interval. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3 | Integer32 (5..86400) | read-write | current |
| alaDvmrpNeighborTimeout OBJECT-TYPE The Neighbor Timeout value specifies how long, without any activity from a neighboring DVMRP router, the router will wait before assuming that the inactive router is down. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.4 | Integer32 (5..86400) | read-write | current |
| alaDvmrpRouteExpirationTimeout OBJECT-TYPE The Route Expiration Timeout value specifies how long the router will wait before aging out a route. When this value expires, the route is advertised as inactive until either it's activity resumes or it is deleted. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.5 | Integer32 (20..4000) | read-write | current |
| alaDvmrpRouteHoldDown OBJECT-TYPE Specifies the time during which DVMRP routes are kept in a hold-down state. A hold-down state refers to the time that a route to an inactive network continues to be advertised. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.6 | Integer32 (1..86400) | read-write | current |
| alaDvmrpNeighborProbeInterval OBJECT-TYPE The Neighbor Probe Interval value specifies how often probes will be transmitted to those interfaces with attached DVMRP neighbors. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.7 | Integer32 (5..30) | read-write | current |
| alaDvmrpPruneLifetime OBJECT-TYPE The Prune Lifetime value defines the value whereby a source-rooted multicast tree will be pruned. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.8 | Integer32 (180..86400) | read-write | current |
| alaDvmrpPruneRetransmission OBJECT-TYPE The Prune Packet Retransmission value is the duration of time that the router will wait, if it continues to receive unwanted multicast traffic, before retransmitting a prune message. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.9 | Integer32 (30..86400) | read-write | current |
| alaDvmrpGraftRetransmission OBJECT-TYPE The Graft message Retransmission value defines the duration of time that the router will wait before retransmitting a graft message, if it has not already received an acknowledgement from its neighbor. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.10 | Integer32 (5..86400) | read-write | current |
| alaDvmrpInitNbrAsSubord OBJECT-TYPE The value true(1) indicates neighbors, on initial discovery, are considered subordinate. This means traffic may be resumed slightly quicker on network disruptions. But, if the neighbor has trouble handling huge initial blasts of traffic, it may be wise to wait until route reports have been exchanged and the neighbor has requested dependency, before forwarding traffic. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.11 | TruthValue | read-write | current |
| alaDvmrpBfdStatus OBJECT-TYPE Enables/Disables Bfd for DVMRP Protocol. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.12 | INTEGER {enable(1), disable(2)} | read-only | current |
| alaDvmrpBfdAllInterfaceStatus OBJECT-TYPE Enables/Disables Bfd for all DVMRP interfaces. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.13 | INTEGER {enable(1), disable(2)} | read-only | current |
| alaDvmrpMbrOperStatus OBJECT-TYPE Whether MBR is currently enabled/disabled for DVMRP. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.14 | INTEGER {enable(1), disable(2)} | read-only | current |
| alaDvmrpTunnelXIfTable OBJECT-TYPE A list of attributes that are associated with the internal assigned tunnel index when a DVMRP tunnel is created. This table contains additional objects that are not present in the tunnelMIB tunnelIfTable. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2 | not-accessible | current | |
| alaDvmrpTunnelXIfEntry OBJECT-TYPE An entry containing additional attributes associated with a DVMRP tunnel. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1 | not-accessible | current | |
| alaDvmrpTunnelIndex OBJECT-TYPE The tunnel index of the DVMRP tunnel. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.1 | Unsigned32 | not-accessible | current |
| alaDvmrpLocalIfIndex OBJECT-TYPE The interface index of the local end-point of the DVMRP tunnel. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.2 | Unsigned32 | read-only | current |
| alaDvmrpIfAugTable OBJECT-TYPE Expansion for Dvmrp Intf table. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4 | not-accessible | current | |
| alaDvmrpIfAugEntry OBJECT-TYPE An entry of alaDvmrpIfAugEntry. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1 | not-accessible | current | |
| alaDvmrpIfBfdStatus OBJECT-TYPE This object enables/disables BFD for this DVMRP interface. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.1 | INTEGER {enable(1), disable(2)} | read-only | current |
| alaDvmrpIfMbrDefaultInfoStatus OBJECT-TYPE This object enables/disables DVMRP to advertise the default route on this interface. This object is only applicable if the router is operating as a Multicast Border Router. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.2 | INTEGER {enable(1), disable(2)} | read-create | current |
| alcatelIND1DVMRPMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2 | |||
| alcatelIND1DVMRPMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1 | |||
| alcatelIND1DVMRPMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| alaDvmrpCompliance MODULE-COMPLIANCE The compliance statement for routers running DVMRP and implementing the ALCATEL-IND1-DVMRP MIB. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1.1 | current |
| alaDvmrpConfigMIBGroup OBJECT-GROUP A collection of objects to support the management of global configuration parameters on DVMRP routers. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.1 | current |
| alaDvmrpTunnelXIfMIBGroup OBJECT-GROUP These objects are required to provide additional information about configured DVMRP tunnels not found in the standard tunnel MIB. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.2 | current |
| alaDvmrpIfConfigGroup OBJECT-GROUP These objects are required to provide additional information about configured DVMRP interfaces not found in the standard tunnel MIB. | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.3 | current |