MIBs Depot

ALCATEL-IND1-CONFIG-MGR-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.11.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2007-04-03 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-CONFIG-MGR-MIB
Digest
sha256:c9cb46c1dc343d864ed23f8f1d17ac06cb9c5116607885a3dff136b7c61c7fcb

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line Configuration Manager Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1Confmgr
ALCATEL-IND1-VIRTUAL-CHASSIS-MIBVirtualOperChassisId
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-CONFIG-MGR-MIB
ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1ConfigMgrMIBObjects
OBJECT-IDENTITY
Branch For Configuration Manager Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1current
configManager
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1
configFileName
OBJECT-TYPE
The name of the configuration file to be read by the device. The file specified should be present on the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.1SnmpAdminString (SIZE(0..45))read-writecurrent
configFileAction
OBJECT-TYPE
Triggers application of the configuration file specified by the configInputFileName. A value of checkSyntax causes configInputFile to be checked for syntax, with no changes to device configuration. A value of checkSyntaxAndApply causes the configInputFile to be applied to the device configuration.A value of none indicates no action has been triggered.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.2INTEGER {none(1), checkSyntaxOnly(2), apply(3)}read-writecurrent
configErrorFileName
OBJECT-TYPE
The name of the file containing the error messages generated by the device during file configuration.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.3SnmpAdminString (SIZE(0..255))read-onlycurrent
configFileStatus
OBJECT-TYPE
Status of most recent application of configuration file to the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.4INTEGER {noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4)}read-onlycurrent
configFileMode
OBJECT-TYPE
The verbose mode displays all configuration commands and errors when the file is applied on the console screen. Ignored unless set from command line interface.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5INTEGER {none(1), verbose(2)}read-writecurrent
configTimerFileName
OBJECT-TYPE
The name of the configuration file to be read later by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.6SnmpAdminString (SIZE(0..45))read-writecurrent
configTimerFileTime
OBJECT-TYPE
The local time when the configuration file will be read by the device. This object is only set if the configInputFile must be applied at a later time. The following formats are valid: MM/DD/YYYY hh:mm MM/DD/YY hh:mm MM/DD hh:mm - uses current year if after current date and time, next year otherwise. hh:mm - uses today's date if later than current time, tommorow's date otherwise. where YY - year (0-38,99) MM - month (1-12) DD - day (1-31) hh - hour (0-23) mm - minute (0-59)
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.7SnmpAdminString (SIZE(0..16))read-writecurrent
configTimerFileStatus
OBJECT-TYPE
The current status of the ASCII configuration timer.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.8INTEGER {idle(1), pending(2), inProgress(3)}read-onlycurrent
configTimerClear
OBJECT-TYPE
A set of this object causes the ASCII configuration timer to be cleared.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.9Integer32 (0..1)read-writecurrent
configSnapshotFileName
OBJECT-TYPE
The name of the configuration snap-shot file to be generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.10SnmpAdminString (SIZE(0..45))read-writecurrent
configSnapshotAction
OBJECT-TYPE
A set of this object causes the configuration snap-shot to be generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.11Integer32 (0..1)read-writecurrent
configSnapshotAllSelect
OBJECT-TYPE
A set of this object causes all application configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.12Integer32 (0..1)read-writecurrent
configSnapshotVlanSelect
OBJECT-TYPE
A set of this object causes Vlan configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.13Integer32 (0..1)read-writecurrent
configSnapshotSpanningTreeSelect
OBJECT-TYPE
A set of this object causes Spanning Tree configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.14Integer32 (0..1)read-writecurrent
configSnapshotQOSSelect
OBJECT-TYPE
A set of this object causes QOS configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.15Integer32 (0..1)read-writecurrent
configSnapshotIPSelect
OBJECT-TYPE
A set of this object causes IP configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.16Integer32 (0..1)read-writecurrent
configSnapshotIPXSelect
OBJECT-TYPE
A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.17Integer32 (0..1)read-writecurrent
configSnapshotIPMSSelect
OBJECT-TYPE
A set of this object causes IPMS configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.18Integer32 (0..1)read-writecurrent
configSnapshotAAASelect
OBJECT-TYPE
A set of this object causes AAA configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.19Integer32 (0..1)read-writecurrent
configSnapshotSNMPSelect
OBJECT-TYPE
A set of this object causes SNMP configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.20Integer32 (0..1)read-writecurrent
configSnapshot8021QSelect
OBJECT-TYPE
A set of this object causes 802.1Q configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.21Integer32 (0..1)read-writecurrent
configSnapshotLinkAggregateSelect
OBJECT-TYPE
A set of this object causes link aggregation configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.22Integer32 (0..1)read-writecurrent
configSnapshotPortMirrorSelect
OBJECT-TYPE
A set of this object causes port mirroring configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.23Integer32 (0..1)read-writecurrent
configSnapshotXIPSelect
OBJECT-TYPE
A set of this object causes proprietary inter-switch protocol configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.24Integer32 (0..1)read-writecurrent
configSnapshotHealthMonitorSelect
OBJECT-TYPE
A set of this object causes health monitoring configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.25Integer32 (0..1)read-writecurrent
configSnapshotBootPSelect
OBJECT-TYPE
A set of this object causes bootp configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.26Integer32 (0..1)read-writedeprecated
configSnapshotBridgeSelect
OBJECT-TYPE
A set of this object causes source-learning configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.27Integer32 (0..1)read-writecurrent
configSnapshotChassisSelect
OBJECT-TYPE
A set of this object causes the chassis configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.28Integer32 (0..1)read-writecurrent
configSnapshotInterfaceSelect
OBJECT-TYPE
A set of this object causes ethernet interface configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.29Integer32 (0..1)read-writecurrent
configSnapshotPolicySelect
OBJECT-TYPE
A set of this object causes policy manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.30Integer32 (0..1)read-writecurrent
configSnapshotSessionSelect
OBJECT-TYPE
A set of this object causes the user-session configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.31Integer32 (0..1)read-writecurrent
configSnapshotServerLoadBalanceSelect
OBJECT-TYPE
A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.32Integer32 (0..1)read-writecurrent
configSnapshotSystemServiceSelect
OBJECT-TYPE
A set of this object causes system services configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.33Integer32 (0..1)read-writecurrent
configSnapshotVRRPSelect
OBJECT-TYPE
A set of this object causes VRRP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.34Integer32 (0..1)read-writecurrent
configSnapshotWebSelect
OBJECT-TYPE
A set of this object causes web manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.35Integer32 (0..1)read-writecurrent
configSnapshotRIPSelect
OBJECT-TYPE
A set of this object causes RIP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.36Integer32 (0..1)read-writecurrent
configSnapshotOSPFSelect
OBJECT-TYPE
A set of this object causes OSPF configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.37Integer32 (0..1)read-writecurrent
configSnapshotBGPSelect
OBJECT-TYPE
A set of this object causes BGP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.38Integer32 (0..1)read-writecurrent
configSnapshotIPRMSelect
OBJECT-TYPE
A set of this object causes IPRM routing configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.39Integer32 (0..1)read-writecurrent
configSnapshotIPMRSelect
OBJECT-TYPE
A set of this object causes IP multicast routing configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.40Integer32 (0..1)read-writecurrent
configSnapshotModuleSelect
OBJECT-TYPE
A set of this object causes module configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.41Integer32 (0..1)read-writecurrent
configTechSupportLogAction
OBJECT-TYPE
A set of this object causes a tech_support.log file to be created containing switch information useful to a technical support group.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.42INTEGER {notSignificant(0), techSupportBasic(1), techSupportL2(2), techSupportL3(3), techSupportL3Rip(4), techSupportL3Ipx(5), techSupportL3Ospf(6), techSupportL3Bgp(7), techSupportL3Pimsm(8), techSupportL3Mroute(9), techSupportL3Dvmrp(10), techSupportL3IPv6(11), techSupportL3RIPng(12), techSupportL3OSPF3(13), techSupportL3Isis(14), techSupportL3Pim6(15), techSupportL3IPsec(16), techSupportL3Bfd(17), techSupportL3Mpls(18), techSupportQoS(19), techSupportAfn(20), techSupportSvcMgr(21)}read-writecurrent
configWriteMemory
OBJECT-TYPE
A set of this object causes the entire switch snap-shot configuration to be stored in the boot.cfg file in the current running directory.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.43Integer32 (0..1)read-writecurrent
configErrorFileMaximum
OBJECT-TYPE
The maximum number of error files which may be present on a switch. Each time a new error file is created, all but the newest configErrorFileMaxNum error files are deleted.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.44Integer32 (1..25)read-writecurrent
configChangeStatus
OBJECT-TYPE
The current state of the running configuration with respect to the saved configuration.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.45INTEGER {identical(1), different(2)}read-onlycurrent
configSnapshotRDPSelect
OBJECT-TYPE
A set of this object causes RDP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.46Integer32 (0..1)read-writecurrent
configSnapshotIPv6Select
OBJECT-TYPE
A set of this object causes IPv6 configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.47Integer32 (0..1)read-writecurrent
configSnapshotRIPngSelect
OBJECT-TYPE
A set of this object causes RIPng configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.48Integer32 (0..1)read-writecurrent
configSnapshotAtmSelect
OBJECT-TYPE
A set of this object causes ATM configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.49Integer32 (0..1)read-writecurrent
configSnapshotSonetSelect
OBJECT-TYPE
A set of this object causes Sonet configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.50Integer32 (0..1)read-writecurrent
configSnapshotNTPSelect
OBJECT-TYPE
A set of this object causes NTP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.51Integer32 (0..1)read-writecurrent
configSnapshotPortMappingSelect
OBJECT-TYPE
A set of this object causes Port Mapping configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.52Integer32 (0..1)read-writecurrent
configSnapshotOSPF3Select
OBJECT-TYPE
A set of this object causes OSPF3 configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.53Integer32 (0..1)read-writecurrent
configWriteMemoryStatus
OBJECT-TYPE
Status of most recent wwrite memory action.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.54INTEGER {noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4)}read-onlycurrent
configSnapshotStackSelect
OBJECT-TYPE
A set of this object causes STack Manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.55Integer32 (0..1)read-writecurrent
configSnapshotISISSelect
OBJECT-TYPE
A set of this object causes ISIS configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.56Integer32 (0..1)read-writecurrent
configSnapshotEOAMSelect
OBJECT-TYPE
A set of this object causes Ethernet OAM configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.57Integer32 (0..1)read-writecurrent
configSnapshotUDLDSelect
OBJECT-TYPE
A set of this object causes UDLD configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.58Integer32 (0..1)read-writecurrent
configSnapshotNETSECSelect
OBJECT-TYPE
A set of this object causes NETSEC configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.59Integer32 (0..1)read-writedeprecated
configSnapshotIPsecSelect
OBJECT-TYPE
A set of this object causes IP Security configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.60Integer32 (0..1)read-writecurrent
configSnapshotBFDSelect
OBJECT-TYPE
A set of this object causes BFD configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.61Integer32 (0..1)read-writecurrent
configSnapshotMultiChassisSelect
OBJECT-TYPE
A set of this object causes MCM configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.62Integer32 (0..1)read-writecurrent
configSnapshotErpSelect
OBJECT-TYPE
A set of this object causes ERP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.63Integer32 (0..1)read-writecurrent
configSnapshotMPLSSelect
OBJECT-TYPE
A set of this object causes MPLS configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.64Integer32 (0..1)read-writecurrent
configSnapshotEFMOAMSelect
OBJECT-TYPE
A set of this object causes EFMOAM configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.65Integer32 (0..1)read-writecurrent
configSnapshotCapabilitySelect
OBJECT-TYPE
A set of this object causes capability manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.66Integer32 (0..1)read-writecurrent
configSnapshotVfcSelect
OBJECT-TYPE
A set of this object causes VFC configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.67Integer32 (0..1)read-writecurrent
configSnapshotHaVlanSelect
OBJECT-TYPE
A set of this object causes HA VLAN configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.68Integer32 (0..1)read-writecurrent
configSnapshotDaUnpSelect
OBJECT-TYPE
A set of this object causes DA UNP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.69Integer32 (0..1)read-writecurrent
configSnapshotDHLSelect
OBJECT-TYPE
A set of this object causes DHL configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.70Integer32 (0..1)read-writecurrent
configSnapshotMVRPSelect
OBJECT-TYPE
A set of this object causes MVRP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.71Integer32 (0..1)read-writecurrent
configSnapshotSAASelect
OBJECT-TYPE
A set of this object causes SAA configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.72Integer32 (0..1)read-writecurrent
configSnapshotSPBSelect
OBJECT-TYPE
A set of this object causes SPB configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.73Integer32 (0..1)read-writecurrent
configSnapshotSPBIsisSelect
OBJECT-TYPE
A set of this object causes SPB ISIS configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.74Integer32 (0..1)read-writecurrent
configSnapshotVirtualChassisSelect
OBJECT-TYPE
A set of this object causes VCM configuration data to be included in the snap-shot file generated by the device. A set of this object is only valid in standalone mode
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.75Integer32 (0..1)read-writecurrent
configSnapshotMplsLdpSelect
OBJECT-TYPE
A set of this object causes MPLS LDP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.76Integer32 (0..1)read-writecurrent
configSnapshotVCMSpecific
OBJECT-TYPE
A set of this object causes VCM configuration data for the chassis specified by configSnapshotChassisId to be included in the snap-shot file generated by the device A set of this object is only valid in virtual chassis mode.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.77Integer32 (0..1)read-writecurrent
configSnapshotChassisId
OBJECT-TYPE
A set of this object in combination with configSnapshotVCMSpecific causes VCM configuration data for the specified chassis to be included in the snap-shot file generated by the device. A set of this object is only valid in virtual chassis mode.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.78VirtualOperChassisIdread-writecurrent
configSnapshotEvbSelect
OBJECT-TYPE
A set of this object causes EVB configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.79Integer32 (0..1)read-writecurrent
configConvertConfiguration
OBJECT-TYPE
A set of this object to virtualChassis is only valid in standalone mode and causes a virtual chassis snapshot to be generated from the running configuration. The resulting vcsetup.cfg and vcboot.cfg files are stored in the directory specified by configConvertDestinationDirectory. If no directory is specified the running directory will be used provided the running directory is not the certified directory.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.80INTEGER {notSignificant(0), virtualChassis(1)}read-writecurrent
configConvertConfigurationStatus
OBJECT-TYPE
Status of most recent convert configuration action.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.81INTEGER {noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4)}read-onlycurrent
configConvertDestinationDirectory
OBJECT-TYPE
The destination directory for the files created by the action of setting the configConvertConfiguration object.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.82SnmpAdminString (SIZE(0..45))read-writecurrent
configConvertReload
OBJECT-TYPE
A set of this object will initiate a reboot of the switch as part of the configConvertConfiguration action.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.83Integer32 (0..1)read-writecurrent
configSnapshotAppfpSelect
OBJECT-TYPE
A set of this object causes Application Finger Print configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.84Integer32 (0..1)read-writecurrent
configSnapshotFipsSelect
OBJECT-TYPE
A set of this object causes FIP Snooping configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.85Integer32 (0..1)read-writecurrent
configSnapshotLFPSelect
OBJECT-TYPE
A set of this object causes LFP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.86Integer32 (0..1)read-writecurrent
configSnapshotPmInterfaceSelect
OBJECT-TYPE
A set of this object causes Port Manager Interfaceconfiguration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.87Integer32 (0..1)read-writecurrent
configSnapshotAutofabricSelect
OBJECT-TYPE
A set of this object causes Autofabric configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.88Integer32 (0..1)read-writecurrent
configSnapshotDhcpv6RelaySelect
OBJECT-TYPE
A set of this object causes DHCPv6 Relay configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.89Integer32 (0..1)read-writecurrent
configSnapshotSIPSelect
OBJECT-TYPE
A set of this object causes Autofabric configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.90Integer32 (0..1)read-writecurrent
configSnapshotOpenflowSelect
OBJECT-TYPE
A set of this object causes Openflow configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.91Integer32 (0..1)read-writecurrent
configSnapshotWlanSelect
OBJECT-TYPE
A set of this object causes Wlan configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.92Integer32 (0..1)read-writecurrent
configSnapshotDhcpSrvSelect
OBJECT-TYPE
A set of this object causes DhcpSrv configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.93Integer32 (0..1)read-writecurrent
configSnapshotDPISelect
OBJECT-TYPE
A set of this object causes Dpi configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.94Integer32 (0..1)read-writecurrent
configSnapshotMsgSrvSelect
OBJECT-TYPE
A set of this object causes MsgSrv configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.95Integer32 (0..1)read-writecurrent
configSnapshotAlSrvSelect
OBJECT-TYPE
A set of this object causes ActiveLeaseSrv configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.96Integer32 (0..1)read-writecurrent
configSnapshotDhcpv6SrvSelect
OBJECT-TYPE
A set of this object causes Dhcp6Srv configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.97Integer32 (0..1)read-writecurrent
configSnapshotAGSelect
OBJECT-TYPE
A set of this object causes AG configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.98Integer32 (0..1)read-writecurrent
configSnapshotQMRSelect
OBJECT-TYPE
A set of this object causes QMR configuration data to be included in the snap-shot file generated by the the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.99Integer32 (0..1)read-writecurrent
configSnapshotVCSPSelect
OBJECT-TYPE
A set of this object causes VCSP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.100Integer32 (0..1)read-writecurrent
configSnapshotDhcpSnoopingSelect
OBJECT-TYPE
A set of this object causes DHCP SNOOPING configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.101Integer32 (0..1)read-writecurrent
configSnapshotAppMonSelect
OBJECT-TYPE
A set of this object causes Application Monitoring configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.102Integer32 (0..1)read-writecurrent
configSnapshotLbdSelect
OBJECT-TYPE
A set of this object causes Loopback Detection configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.103Integer32 (0..1)read-writecurrent
configSnapshotVMSnoopSelect
OBJECT-TYPE
A set of this object causes VM Snooping configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.104Integer32 (0..1)read-writecurrent
configSnapshotPppoeIaSelect
OBJECT-TYPE
A set of this object causes PPPoE-IA configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.105Integer32 (0..1)read-writecurrent
configSnapshotPmPortViolationSelect
OBJECT-TYPE
A set of this object causes Port Violation configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.106Integer32 (0..1)read-writecurrent
configSnapshotLanPowerSelect
OBJECT-TYPE
A set of this object causes Lan Power configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.107Integer32 (0..1)read-writecurrent
configSnapshotPVLANSelect
OBJECT-TYPE
A set of this object causes Private VLAN(PVLAN) configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.108Integer32 (0..1)read-writecurrent
configSnapshotKEYMGRSelect
OBJECT-TYPE
A set of this object causes Key manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.109Integer32 (0..1)read-writecurrent
configSnapshotZeroConfSelect
OBJECT-TYPE
A set of this object causes Zero configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.110Integer32 (0..1)read-writecurrent
configSnapshotMacSecSelect
OBJECT-TYPE
A set of this object causes MAC security data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.111Integer32 (0..1)read-writecurrent
configSnapshotCloudAgentSelect
OBJECT-TYPE
A set of this object causes MAC security data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.112Integer32 (0..1)read-writecurrent
configSnapshotAlarmManagerSelect
OBJECT-TYPE
A set of this object causes Alarm manager data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.113Integer32 (0..1)read-writecurrent
configSnapshotDeviceProfileSelect
OBJECT-TYPE
A set of this object causes device profile data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.114Integer32 (0..1)read-writecurrent
configSnapshotPtpSelect
OBJECT-TYPE
A set of this object causes PTP data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.115Integer32 (0..1)read-writecurrent
configSnapshotIpDhcpRelaySelect
OBJECT-TYPE
A set of this object causes ip dhcp relay data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.116Integer32 (0..1)read-writecurrent
configSnapshotDhcpv6SnoopingSelect
OBJECT-TYPE
A set of this object causes DHCPv6 Guard/Snooping configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.117Integer32 (0..1)read-writecurrent
configSnapshotTestOamSelect
OBJECT-TYPE
A set of this object causes Test Oam configuration data togenerated be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.118Integer32 (0..1)read-writecurrent
configSnapshotLoopbackTestSelect
OBJECT-TYPE
A set of this object causes Loopback Test configuration data togenerated be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.119Integer32 (0..1)read-writecurrent
configSnapshotUdpv6RelaySelect
OBJECT-TYPE
A set of this object causes IPv6 UDP RELAY configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.120Integer32 (0..1)read-writecurrent
configNetworkSyncFileName
OBJECT-TYPE
The name of the configuration file to be read by the device. The file specified should be present on the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.121SnmpAdminString (SIZE(0..45))read-writecurrent
configNetworkSyncFileAction
OBJECT-TYPE
Triggers application of the configuration file specified by the configNetworkSyncFileName. A value of Apply causes the configNetworkSyncFileName to be applied to the device configuration. A value of none indicates no action has been triggered.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.122INTEGER {none(1), apply(2), localApply(3)}read-writecurrent
configNetworkSyncCommunity
OBJECT-TYPE
The name of the community to which the network synchronization configuration file specified by the configNetworkSyncFileName are applied.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.123SnmpAdminString (SIZE(0..64))read-writecurrent
configSnapshotMgmtAgentSelect
OBJECT-TYPE
A set of this object causes management agent configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.124Integer32 (0..1)read-writecurrent
configSnapshotMRPSelect
OBJECT-TYPE
A set of this object causes MRP configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.125Integer32 (0..1)read-writecurrent
configSnapshotPkgMgrSelect
OBJECT-TYPE
A set of this object causes Package Manager configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.126Integer32 (0..1)read-writecurrent
configFileBackupRestore
OBJECT-TYPE
Backup or restore the configuration files.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.127INTEGER {backup(1), restore(2)}read-writecurrent
configSnapshotSiteLicenseServerSelect
OBJECT-TYPE
A set of this object causes site license server configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.128Integer32 (0..1)read-writecurrent
configSnapshotSiteLicenseClientSelect
OBJECT-TYPE
A set of this object causes site license client configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.129Integer32 (0..1)read-writecurrent
configSnapshotTcamSelect
OBJECT-TYPE
A set of this object causes tcam configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.130Integer32 (0..1)read-writecurrent
configSnapshotProfinetSelect
OBJECT-TYPE
A set of this object causes profinet configuration data to be included in the snap-shot file generated by the device.
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.131Integer32 (0..1)read-writecurrent
alcatelIND1ConfigMgrMIBConformance
OBJECT-IDENTITY
Branch For Configuration Manager Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2current
alcatelIND1ConfigMgrMIBGroups
OBJECT-IDENTITY
Branch For Configuration Manager Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1current
alcatelIND1ConfigMgrMIBCompliances
OBJECT-IDENTITY
Branch For Configuration Manager Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2current

Conformance

NameOIDStatus
configFileGroup
OBJECT-GROUP
Collection of objects for file configuration.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.1current
configTimerFileGroup
OBJECT-GROUP
Collection of objects for timer file configuration.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.2current
configSnapshotGroup
OBJECT-GROUP
Collection of objects for snapshot configuration.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.3current
configTechSupportLogGroup
OBJECT-GROUP
Collection of objects for technical support log file.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.4current
configWriteMemoryGroup
OBJECT-GROUP
Collection of objects for write memory.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.5current
configConvertConfigurationGroup
OBJECT-GROUP
Collection of objects for write memory.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.6current
alcatelIND1ConfigMgrMIBCompliance
MODULE-COMPLIANCE
Compliance statement for Configuration Manager Subsystem.
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2.1current