MIBs Depot

ALCATEL-IND1-BGP-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.10.5.1
Last updated
2022-11-21 00:00
Organization
ALE USA Inc.
Revisions
2023-05-25 00:00, 2022-11-21 00:00, 2019-11-27 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-BGP-MIB
Digest
sha256:ec290c4146f4fc35e2d32a888a15a4798076ba7bcc588758a7066b8cd44dcf7c

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Configuration of BGP Protocol Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEroutingIND1Bgp
INET-ADDRESS-MIBInetAddress, InetAddressType, InetAutonomousSystemNumber
IPV6-TCIpv6Address
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-BGP-MIB
INET-ADDRESS-MIB
IPV6-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1BGPMIBNotifications
OBJECT-IDENTITY
Branch For Border Gateway Protocol (BGP) Subsystem Notifications.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.0current
alcatelIND1BGPMIBObjects
OBJECT-IDENTITY
Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1current
alaBgpGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1
alaBgpProtoStatus
OBJECT-TYPE
The administrative status of BGP protocol.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpAutonomousSystemNumber
OBJECT-TYPE
The BGP Autonomous System (AS) Number.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.2InetAutonomousSystemNumberread-writecurrent
alaBgpRouterId
OBJECT-TYPE
The configured BGP router ID.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.3IpAddressread-onlycurrent
alaBgpIgpSynchStatus
OBJECT-TYPE
Enable/Disable IGP Synchronization for learned BGP prefixes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpMedAlways
OBJECT-TYPE
Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpDefaultLocalPref
OBJECT-TYPE
The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.6Gauge32 (0..4294967295)read-writecurrent
alaBgpMissingMed
OBJECT-TYPE
Specifies how to a missing med in a path attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.7INTEGER {worst(1), best(2)}read-writecurrent
alaBgpManualTag
OBJECT-TYPE
Manual tag to be used for learned BGP routes. A value of 0 means no manual tagging.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.8Gauge32 (0..65535)read-onlycurrent
alaBgpConfedId
OBJECT-TYPE
Confederation identifier. A value of 0 means this local speaker is not a member of any confederation
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.9InetAutonomousSystemNumberread-writecurrent
alaBgpDampening
OBJECT-TYPE
Enable/Disable BGP route dampening
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.10INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpDampMaxFlapHistory
OBJECT-TYPE
The time in seconds the flap history of a route is retained.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.11Integer32 (0..65535)read-writecurrent
alaBgpFastExternalFailOver
OBJECT-TYPE
Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.12INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpPeerChanges
OBJECT-TYPE
Enable/Disable logging of peer state changes to the syslog.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.13INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpVersion
OBJECT-TYPE
The BGP Version in use.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.14Integer32 (1..255)read-onlycurrent
alaBgpProtoOperState
OBJECT-TYPE
The BGP protocol operational state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.15INTEGER {up(1), down(2)}read-onlycurrent
alaBgpMaxPeers
OBJECT-TYPE
Maximum number of BGP peers supported.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.16Integer32 (32 | 64 | 128 | 256 | 512)read-writecurrent
alaBgpNumActiveRoutes
OBJECT-TYPE
The number of active known routes in the BGP routing table
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.17Gauge32read-onlycurrent
alaBgpNumEstabExternalPeers
OBJECT-TYPE
The number of External Peers that are in ESTABLISHED state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.18Counter32read-onlycurrent
alaBgpNumEstabInternalPeers
OBJECT-TYPE
The number of Internal Peers that are in ESTABLISHED state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.19Counter32read-onlycurrent
alaBgpNumPaths
OBJECT-TYPE
The total number of paths known to the system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.20Counter32read-onlycurrent
alaBgpNumFeasiblePaths
OBJECT-TYPE
The total number of feasible paths known to the system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.21Counter32read-onlycurrent
alaBgpNumDampenedPaths
OBJECT-TYPE
The total number of dampened paths known to the system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.22Counter32read-onlycurrent
alaBgpNumIgpSyncWaitPaths
OBJECT-TYPE
The total number of paths learnt from internal peers that are waiting to be synchronized with IGP.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.23Counter32read-onlycurrent
alaBgpNumPolicyChgPaths
OBJECT-TYPE
The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynamic policy changes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.24Counter32read-onlycurrent
alaBgpMultiPath
OBJECT-TYPE
Enable/Disable Equal-Cost MultiPaths
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.25INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpRouteReflection
OBJECT-TYPE
Enable/Disable Route reflection
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.26INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpClusterId
OBJECT-TYPE
The local cluster id of this route reflection cluster.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.27IpAddressread-writecurrent
alaBgpDampeningClear
OBJECT-TYPE
Writing a value of clear into this variable will clear the dampening history.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.28INTEGER {clear(1)}read-writecurrent
alaBgpDampCutOff
OBJECT-TYPE
When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 ,a value of 9.45 is encoded as 945.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.29Integer32 (1..9999)read-writecurrent
alaBgpDampReuse
OBJECT-TYPE
When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 , a value of 9.45 is encoded as 945.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.30Integer32 (1..9999)read-writecurrent
alaBgpDampCeil
OBJECT-TYPE
The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.31Integer32 (100..9999)read-onlycurrent
alaBgpAspathCompare
OBJECT-TYPE
Specifies whether to include aspath comparison in route selection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.32INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpAsOriginInterval
OBJECT-TYPE
The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.33Integer32 (1..65535)read-writecurrent
alaBgpDampHalfLife
OBJECT-TYPE
The time in seconds in which the penalty to a flapping route decreases to half its initial value.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.34Integer32 (0..65535)read-writecurrent
alaBgpGracefulRestart
OBJECT-TYPE
Enables BGP graceful restart capability.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.35INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpRestartInterval
OBJECT-TYPE
Determines how long, in seconds, peering BGP routers are told to wait for this router to complete graceful restart and re-establish peering session. It is recommended that this value not be more than the configured Hold Time interval.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.36Integer32 (1..3600)read-writecurrent
alaBgpRestartStatus
OBJECT-TYPE
Indicates whether the router is currently performing a graceful restart.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.37INTEGER {notRestarting(1), inProgress(2)}read-onlycurrent
alaBgpMultiProtocolIpv4
OBJECT-TYPE
Indicates whether IPv4 BGP4 capability is enabled.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.38INTEGER {enabled(1), disabled(2)}read-writecurrent
alaBgpMultiProtocolIpv6
OBJECT-TYPE
Indicates whether IPv6 BGP4 capability is enabled.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.39INTEGER {enabled(1), disabled(2)}read-writecurrent
alaBgpBfdStatus
OBJECT-TYPE
Enables/Disables interaction with BFD module for BGP protocol.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.40INTEGER {enabled(1), disabled(2)}read-writecurrent
alaBgpBfdAllNeighborStatus
OBJECT-TYPE
Enables/Disables reachability detection using BFD for all BGP Neighbors.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.41INTEGER {enabled(1), disabled(2)}read-writecurrent
alaBgpAsnFormat
OBJECT-TYPE
Configures the display format to be used when displaying 4-octet Autonomous System Numbers. This configuration will change only the output format. The input format can still be in either mode.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.42INTEGER {asplain(1), asdot(2)}read-writecurrent
alaBgpClearAllNeighborStats
OBJECT-TYPE
Setting a value of clear into this variable will clear the per peer statistics for all peers.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.43INTEGER {clear(1)}read-createcurrent
alaBgpAddrFamilyL2vpnVpls
OBJECT-TYPE
Enables/Disables L2VPN-VPLS capability in BGP.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.44INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpAddrFamilyEvpn
OBJECT-TYPE
Enables/Disables L2VPN-VPLS capability in BGP.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.45INTEGER {enable(1), disable(2)}read-writecurrent
alaBgpEvpnFabricAutonomousSystem
OBJECT-TYPE
Evpn fabric autonomous system
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.46InetAutonomousSystemNumberread-writecurrent
alaBgpPeerTable
OBJECT-TYPE
BGP IPv4 peer table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2not-accessiblecurrent
alaBgpPeerEntry
OBJECT-TYPE
BGP IPv4 Peer configuration entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1not-accessiblecurrent
alaBgpPeerAddr
OBJECT-TYPE
Ip Address of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.1IpAddressread-onlycurrent
alaBgpPeerAS
OBJECT-TYPE
Autonomous system of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.2InetAutonomousSystemNumberread-createcurrent
alaBgpPeerPassive
OBJECT-TYPE
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.3INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerName
OBJECT-TYPE
A symbolic name for the neighbour.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.4SnmpAdminString (SIZE(0..60))read-createcurrent
alaBgpPeerMultiHop
OBJECT-TYPE
If enabled the external peer is allowed to be multiple hops away.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.5INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerMaxPrefix
OBJECT-TYPE
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.6Gauge32 (0..2147483647)read-createcurrent
alaBgpPeerMaxPrefixWarnOnly
OBJECT-TYPE
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP switch logging for type 'warnings' must be activated and level set to info.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.7INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerNextHopSelf
OBJECT-TYPE
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.8INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerSoftReconfig
OBJECT-TYPE
Enable/Disable dynamic policy configurability on the connection to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.9INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerInSoftReset
OBJECT-TYPE
Route refresh capability is Enabled/Disabled on the connection to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeerIpv4Unicast
OBJECT-TYPE
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeerIpv4Multicast
OBJECT-TYPE
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeerRcvdRtRefreshMsgs
OBJECT-TYPE
The number of route refresh messages received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.13Counter32read-onlycurrent
alaBgpPeerSentRtRefreshMsgs
OBJECT-TYPE
The number of route refresh messages sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.14Counter32read-onlycurrent
alaBgpPeerRouteMapOut
OBJECT-TYPE
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.15SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerRouteMapIn
OBJECT-TYPE
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.16SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerLocalAddr
OBJECT-TYPE
Local Ip Address of this connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.17IpAddressread-createcurrent
alaBgpPeerLastDownReason
OBJECT-TYPE
The general reason for termination of last established session with the peer since the protocol was operationally up.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.18INTEGER {userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9)}read-onlycurrent
alaBgpPeerLastDownTime
OBJECT-TYPE
The time elapsed since the BGP session with the peer was terminated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.19TimeTicksread-onlycurrent
alaBgpPeerLastReadTime
OBJECT-TYPE
The time elapsed since we last read data from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.20TimeTicksread-onlycurrent
alaBgpPeerRcvdNotifyMsgs
OBJECT-TYPE
The Number of notification messages received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.21Counter32read-onlycurrent
alaBgpPeerSentNotifyMsgs
OBJECT-TYPE
The Number of notification messages sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.22Counter32read-onlycurrent
alaBgpPeerLastSentNotifyReason
OBJECT-TYPE
The last notification reason sent.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.23INTEGER {msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)}read-onlycurrent
alaBgpPeerLastRecvNotifyReason
OBJECT-TYPE
The last notification reason received.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.24INTEGER {msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)}read-onlycurrent
alaBgpPeerRcvdPrefixes
OBJECT-TYPE
The Number of prefixes received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.25Counter32read-onlycurrent
alaBgpPeerDownTransitions
OBJECT-TYPE
The Number of times this peer session transitioned to IDLE state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.26Counter32read-onlycurrent
alaBgpPeerType
OBJECT-TYPE
This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.27INTEGER {internal(1), external(2)}read-onlycurrent
alaBgpPeerClearCounter
OBJECT-TYPE
Setting a value of clear into this variable will clear the per peer statistics.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.28INTEGER {clear(1)}read-createcurrent
alaBgpPeerAutoReStart
OBJECT-TYPE
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.29INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerClientStatus
OBJECT-TYPE
If enabled this peer is a route reflection client.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.30INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerConfedStatus
OBJECT-TYPE
If enabled this peer is a member of our confederation.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.31INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerRemovePrivateAs
OBJECT-TYPE
If enabled private as numbers are stripped out in the updates sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.32INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerTTL
OBJECT-TYPE
TTL count for packets on this TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.33Integer32 (0..255)read-createcurrent
alaBgpPeerAspathListOut
OBJECT-TYPE
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.34SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerAspathListIn
OBJECT-TYPE
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.35SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerPrefixListOut
OBJECT-TYPE
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.36SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerPrefixListIn
OBJECT-TYPE
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.37SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerCommunityListOut
OBJECT-TYPE
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.38SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerCommunityListIn
OBJECT-TYPE
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.39SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerRestart
OBJECT-TYPE
Setting a value of restart into this variable will restart the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.40INTEGER {restart(1)}read-createcurrent
alaBgpPeerDefaultOriginate
OBJECT-TYPE
If enabled a default route is sent to this neighbour.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.41INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerReconfigureInBound
OBJECT-TYPE
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.42INTEGER {reconfigure(1)}read-createcurrent
alaBgpPeerReconfigureOutBound
OBJECT-TYPE
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.43INTEGER {reconfigure(1)}read-createcurrent
alaBgpPeerMD5Key
OBJECT-TYPE
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.44SnmpAdminString (SIZE(0..80))read-createcurrent
alaBgpPeerMD5KeyEncrypt
OBJECT-TYPE
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.45OCTET STRING (SIZE(0..512))read-onlycurrent
alaBgpPeerRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.46RowStatusread-createcurrent
alaBgpPeerUpTransitions
OBJECT-TYPE
The Number of times this peer session transitioned to ESTABLISHED state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.47Counter32read-onlycurrent
alaBgpPeerLastWriteTime
OBJECT-TYPE
The time elapsed since we last sent data to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.48TimeTicksread-onlycurrent
alaBgpPeerRcvdMsgs
OBJECT-TYPE
The Number of messages received from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.49Counter32read-onlycurrent
alaBgpPeerSentMsgs
OBJECT-TYPE
The Number of messages sent to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.50Counter32read-onlycurrent
alaBgpPeerRcvdUpdMsgs
OBJECT-TYPE
The Number of update messages received from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.51Counter32read-onlycurrent
alaBgpPeerSentUpdMsgs
OBJECT-TYPE
The Number of update messages sent to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.52Counter32read-onlycurrent
alaBgpPeerLastTransitionTime
OBJECT-TYPE
The time elapsed since the BGP session was operationally up or down to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.53TimeTicksread-onlycurrent
alaBgpPeerLastUpTime
OBJECT-TYPE
The time elapsed since the BGP session with the peer was established.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.54TimeTicksread-onlycurrent
alaBgpPeerBgpId
OBJECT-TYPE
BGP Identifier of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.55IpAddressread-onlycurrent
alaBgpPeerLocalIntfName
OBJECT-TYPE
The user defined name used to identify the local IP interface for this peer's TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.56SnmpAdminStringread-onlycurrent
alaBgpPeerRestartTime
OBJECT-TYPE
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.57Integer32 (0..3600)read-onlycurrent
alaBgpPeerRestartState
OBJECT-TYPE
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.58INTEGER {notRestarting(1), restarting(2), none(3)}read-onlycurrent
alaBgpPeerRestartFwdState
OBJECT-TYPE
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.59INTEGER {notPreserved(1), preserved(2)}read-onlycurrent
alaBgpPeerIpv6Unicast
OBJECT-TYPE
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.60INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeerIpv6NextHop
OBJECT-TYPE
The IPv6 nexthop for IPv6 routes advertised to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.61Ipv6Addressread-createcurrent
alaBgpPeerLocalPort
OBJECT-TYPE
The local port number for this peer's TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.62Integer32 (0..65535)read-onlycurrent
alaBgpPeerTcpWindowSize
OBJECT-TYPE
The size of the socket buffers, in bytes, used for this TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.63Integer32 (0..65535)read-onlycurrent
alaBgpPeerActivateIpv6
OBJECT-TYPE
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.64INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeerBfdStatus
OBJECT-TYPE
Enables/Disables BFd for a particular Peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.65INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeerPrefix6ListOut
OBJECT-TYPE
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.66SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerPrefix6ListIn
OBJECT-TYPE
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.67SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeerActivateIpv4
OBJECT-TYPE
If enabled, the Multiprotocol IPv4 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.68INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeerTTLSecurityHops
OBJECT-TYPE
The maximum number of hops (0..255) a BGP packet may traverse when the Generalized TTL Security Mechansim is enabled for this peer. A value of 256, the default, indicates that GTSM is not enabled for communication with this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.69Integer32 (0..256)read-createcurrent
alaBgpPeerCheckFirstAS
OBJECT-TYPE
This object is used to check for first AS in the received ASPATH
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.70INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerActivateL2vpnVpls
OBJECT-TYPE
Enable to send L2VPN-VPLS capability to the neighbor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.71INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerCapabilityL2vpnVpls
OBJECT-TYPE
Indicates whether the peer has advertised the L2VPN VPLS capability in its BGP OPEN message. Both peers must advertise the L2VPN-VPLS capability to establish the connection with the L2VPN-VPLS capability enabled.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.72INTEGER {unknown(0), advertised(1), notAdvertised(2)}read-onlycurrent
alaBgpPeerActivateEvpn
OBJECT-TYPE
Enable to send EVPN capability to the neighbor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.73INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerTemplateName
OBJECT-TYPE
The bgp template name of the neighbor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.74SnmpAdminString (SIZE(0..60))read-createcurrent
alaBgpPeerEvpnNbrTypeFabric
OBJECT-TYPE
Evpn nbr type fabric of the neighbor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.75INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeerUpdateSource
OBJECT-TYPE
Update source of this connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.76SnmpAdminStringread-createcurrent
alaBgpAggrTable
OBJECT-TYPE
BGP Aggregate configuration table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3not-accessiblecurrent
alaBgpAggrEntry
OBJECT-TYPE
BGP Aggregation entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1not-accessiblecurrent
alaBgpAggrAddr
OBJECT-TYPE
Aggregate address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.1IpAddressread-onlycurrent
alaBgpAggrMask
OBJECT-TYPE
Aggregate Mask.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.2IpAddressread-onlycurrent
alaBgpAggrSummarize
OBJECT-TYPE
If enabled only aggregate is advertised. Otherwise more specific routes are also advertised.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.3INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpAggrSet
OBJECT-TYPE
If enabled aggregate all aspaths.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.4INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpAggrState
OBJECT-TYPE
If active the aggregate is actively being advertised.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.5INTEGER {active(1), inactive(2)}read-onlycurrent
alaBgpAggrMetric
OBJECT-TYPE
This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.6Gauge32 (0..4294967295)read-createcurrent
alaBgpAggrLocalPref
OBJECT-TYPE
This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.7Gauge32 (0..4294967295)read-createcurrent
alaBgpAggrCommunity
OBJECT-TYPE
The value to set the COMMUNITY attribute when advertising this aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.8SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpAggrRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.9RowStatusread-createcurrent
alaBgpNetworkTable
OBJECT-TYPE
BGP Network configuration table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4not-accessiblecurrent
alaBgpNetworkEntry
OBJECT-TYPE
BGP Network entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1not-accessiblecurrent
alaBgpNetworkAddr
OBJECT-TYPE
Aggregate address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.1IpAddressread-onlycurrent
alaBgpNetworkMask
OBJECT-TYPE
Aggregate Mask.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.2IpAddressread-onlycurrent
alaBgpNetworkState
OBJECT-TYPE
Indicates whether the network is being actively advertised or not.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
alaBgpNetworkMetric
OBJECT-TYPE
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.4Gauge32 (0..4294967295)read-createcurrent
alaBgpNetworkLocalPref
OBJECT-TYPE
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.5Gauge32 (0..4294967295)read-createcurrent
alaBgpNetworkCommunity
OBJECT-TYPE
The value to set the COMMUNITY attribute when advertising this network.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.6SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpNetworkRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.7RowStatusread-createcurrent
alaBgpRouteTable
OBJECT-TYPE
BGP Routing table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5not-accessiblecurrent
alaBgpRouteEntry
OBJECT-TYPE
BGP Route entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1not-accessiblecurrent
alaBgpRouteAddr
OBJECT-TYPE
Destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.1IpAddressread-onlycurrent
alaBgpRouteMask
OBJECT-TYPE
Destination Mask.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.2IpAddressread-onlycurrent
alaBgpRouteState
OBJECT-TYPE
Indicates whether the route is being actively advertised or not.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.3INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoutePaths
OBJECT-TYPE
Number of total paths available to this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.4Counter32read-onlycurrent
alaBgpRouteFeasiblePaths
OBJECT-TYPE
Number of Feasible paths available to this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.5Counter32read-onlycurrent
alaBgpRouteNextHop
OBJECT-TYPE
The BGP Nexthop to reach this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.6IpAddressread-onlycurrent
alaBgpRouteIgpNextHop
OBJECT-TYPE
The IGP Nexthop to reach this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.7IpAddressread-onlycurrent
alaBgpRouteIsHidden
OBJECT-TYPE
Indicates whether the route is hidden by an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.8INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsAggregate
OBJECT-TYPE
Indicates whether the route is an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.9INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsAggregateContributor
OBJECT-TYPE
Indicates whether the route is a contributor to an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.10INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteAdvNeighbors
OBJECT-TYPE
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.11SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpRouteIsAggregateList
OBJECT-TYPE
Indicates whether the route is on an aggregate list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.12INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsAggregateWait
OBJECT-TYPE
Indicates whether the route is an aggregate waiting for a contributor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.13INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsOnEbgpChgList
OBJECT-TYPE
Indicates whether the route is placed on list of EBGP routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.14INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsOnIbgpClientChgList
OBJECT-TYPE
Indicates whether the route is placed on list of IBGP reflector-client routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.15INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsOnIbgpChgList
OBJECT-TYPE
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.16INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsOnLocalChgList
OBJECT-TYPE
Indicates whether the route is placed on list of local routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.17INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsOnDeleteList
OBJECT-TYPE
Indicates whether the route is placed on delete list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.18INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRouteIsDampened
OBJECT-TYPE
Indicates whether the route is being route flap dampened.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.19INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpPathTable
OBJECT-TYPE
BGP Path table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6not-accessiblecurrent
alaBgpPathEntry
OBJECT-TYPE
BGP path entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1not-accessiblecurrent
alaBgpPathAddr
OBJECT-TYPE
Destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.1IpAddressread-onlycurrent
alaBgpPathMask
OBJECT-TYPE
Destination Mask.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.2IpAddressread-onlycurrent
alaBgpPathPeerAddr
OBJECT-TYPE
The IP address or the BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. For peers with an IPv4 address, the value will be the peer's IPv4 address, and the value of alaBgpPathPeerInetType will be ipv4. For peers with an IPv6 address, the value will be the peer's BGP Identifier, and the value of alaBgpPathPeerInetType will be ipv6.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.3IpAddressread-onlycurrent
alaBgpPathSrcProto
OBJECT-TYPE
The protocol from which the path was learnt.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.4INTEGER {other(1), local(2), static(3), directHost(4), rip(5), ospf(6), isis(7), ebgp(9), ibgp(10), aggregate(11), network(12)}read-onlycurrent
alaBgpPathWeight
OBJECT-TYPE
The weight assigned to this path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.5Integer32 (0..2147483647)read-onlycurrent
alaBgpPathPref
OBJECT-TYPE
The degree of preference assigned to this path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.6Gauge32read-onlycurrent
alaBgpPathState
OBJECT-TYPE
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.7INTEGER {best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7)}read-onlycurrent
alaBgpPathOrigin
OBJECT-TYPE
The ORIGIN attribute of the path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.8INTEGER {igp(1), egp(2), incomplete(3), none(9)}read-onlycurrent
alaBgpPathNextHop
OBJECT-TYPE
The NEXTHOP attribute of the path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.9IpAddressread-onlycurrent
alaBgpPathAs
OBJECT-TYPE
The sequence of AS path segments. Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>. The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.10SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPathLocalPref
OBJECT-TYPE
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.11Integer32 (-1..2147483647)read-onlycurrent
alaBgpPathMed
OBJECT-TYPE
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.12Gauge32 (0..4294967295)read-onlycurrent
alaBgpPathAtomic
OBJECT-TYPE
Indicates whether this path is generated without selecting a less specific route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.13INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpPathAggregatorAs
OBJECT-TYPE
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.14InetAutonomousSystemNumberread-onlycurrent
alaBgpPathAggregatorAddr
OBJECT-TYPE
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.15IpAddressread-onlycurrent
alaBgpPathCommunity
OBJECT-TYPE
The community attribute of the path. The communities are represented as series of 4 octet values.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.16SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPathUnknownAttr
OBJECT-TYPE
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.17OCTET STRING (SIZE(0..255))read-onlycurrent
alaBgpPathOriginatorId
OBJECT-TYPE
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.18IpAddressread-onlycurrent
alaBgpPathClusterList
OBJECT-TYPE
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.19SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPathPeerInetType
OBJECT-TYPE
Indicates whether the peer who sent this path has an IPv4 address or an IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value of alaBgpPathPeerAddr is the peer's IPv4 address. If set to ipv6, the peer has an IPv6 address, and the value of alaBgpPathPeerAddr is the peer's BGP Identifier. For locally sourced routes, the value is set to unknown.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.20INTEGER {unknown(0), ipv4(1), ipv6(2)}read-onlycurrent
alaBgpPathPeerName
OBJECT-TYPE
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.21SnmpAdminString (SIZE(0..60))read-onlycurrent
alaBgpDampTable
OBJECT-TYPE
BGP Dampened paths table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7not-accessiblecurrent
alaBgpDampEntry
OBJECT-TYPE
BGP Network entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1not-accessiblecurrent
alaBgpDampAddr
OBJECT-TYPE
Destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.1IpAddressread-onlycurrent
alaBgpDampMask
OBJECT-TYPE
Destination mask.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.2IpAddressread-onlycurrent
alaBgpDampPeerAddr
OBJECT-TYPE
Neighbour address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.3IpAddressread-onlycurrent
alaBgpDampFigureOfMerit
OBJECT-TYPE
The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.4Integer32 (0..2147483647)read-onlycurrent
alaBgpDampFlaps
OBJECT-TYPE
The number of times this route has flapped.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.5Counter32read-onlycurrent
alaBgpDampDuration
OBJECT-TYPE
Time in seconds since the flap was noticed.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.6TimeTicksread-onlycurrent
alaBgpDampLastUpdateTime
OBJECT-TYPE
Time in seconds since this damp entry (figure of merit) was last updated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.7TimeTicksread-onlycurrent
alaBgpDampReuseTime
OBJECT-TYPE
Time in seconds until this route will be reused.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.8TimeTicksread-onlycurrent
alaBgpDampClear
OBJECT-TYPE
A value of clear will clear this damp history information.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.9INTEGER {clear(1)}read-writecurrent
alaBgpPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8
alaBgpRouteMapTable
OBJECT-TYPE
BGP Policy RouteMap table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1not-accessiblecurrent
alaBgpRouteMapEntry
OBJECT-TYPE
BGP Route Map Entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1not-accessiblecurrent
alaBgpRouteMapName
OBJECT-TYPE
Name of the route map.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpRouteMapInst
OBJECT-TYPE
Instance of this route map.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.2Integer32 (1..255)read-onlycurrent
alaBgpRouteMapAsPathMatchListId
OBJECT-TYPE
This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths matching criteria is to be applied.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.3SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapPrefixMatchListId
OBJECT-TYPE
This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be applied.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.4SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapCommunityMatchListId
OBJECT-TYPE
This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to be applied.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.5SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapOrigin
OBJECT-TYPE
The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.6INTEGER {igp(1), egp(2), incomplete(3), none(255)}read-createcurrent
alaBgpRouteMapLocalPref
OBJECT-TYPE
The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF attribute in conjunction with the associated value of alaBgpRouteMapLocalPrefMode.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.7Gauge32 (0..4294967295)read-createcurrent
alaBgpRouteMapLocalPrefMode
OBJECT-TYPE
This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.8INTEGER {none(1), inc(2), dec(3), rep(4)}read-createcurrent
alaBgpRouteMapMed
OBJECT-TYPE
The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EXIT DISC attribute in conjunction with the associated value of alaBgpRouteMapMedMode.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.9Gauge32 (0..4294967295)read-createcurrent
alaBgpRouteMapMedMode
OBJECT-TYPE
This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied to.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.10INTEGER {none(1), inc(2), dec(3), rep(4)}read-createcurrent
alaBgpRouteMapAsPrepend
OBJECT-TYPE
The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.11SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapSetCommunityMode
OBJECT-TYPE
Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.12INTEGER {add(1), replace(2)}read-createcurrent
alaBgpRouteMapCommunity
OBJECT-TYPE
The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.13SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapMatchAsRegExp
OBJECT-TYPE
AsPath regular expression matching primitive.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.14SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapMatchPrefix
OBJECT-TYPE
Prefix match primitive.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.15IpAddressread-createcurrent
alaBgpRouteMapMatchMask
OBJECT-TYPE
Prefix match mask primitive
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.16IpAddressread-createcurrent
alaBgpRouteMapMatchCommunity
OBJECT-TYPE
Community match primitive
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.17SnmpAdminString (SIZE(1..70))read-createcurrent
alaBgpRouteMapWeight
OBJECT-TYPE
This sets the weight for the incoming route. This parameter has no effect on outbound policy.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.18Integer32 (0..65535)read-createcurrent
alaBgpRouteMapAction
OBJECT-TYPE
This determines whether to allow a matching route to pass through.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.19INTEGER {permit(1), deny(2)}read-createcurrent
alaBgpRouteMapRowStatus
OBJECT-TYPE
Row status variable
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.20RowStatusread-createcurrent
alaBgpRouteMapPrefix6MatchListId
OBJECT-TYPE
This is same as alaBgpPrefix6MatchListId. It identifies the matching criteria list of IPv6 prefixes. Empty quotes indicate no prefix matching criteria is to be applied.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.21SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpRouteMapMatchPrefix6
OBJECT-TYPE
IPv6 Prefix match primitive. A value of 0 indicates default route prefix.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.22Ipv6Addressread-createcurrent
alaBgpRouteMapMatchMaskLength6
OBJECT-TYPE
The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.23Integer32 (0..128)read-createcurrent
alaBgpRouteMapCommunityStrip
OBJECT-TYPE
Community strip primitive
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.24SnmpAdminString (SIZE(1..70))read-createcurrent
alaBgpRouteMapRouteTag
OBJECT-TYPE
Route tag of this route map.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.25Integer32 (0..65535)read-createcurrent
alaBgpAspathMatchListTable
OBJECT-TYPE
BGP Policy Aspath criteria matching table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2not-accessiblecurrent
alaBgpAspathMatchListEntry
OBJECT-TYPE
Aspath matching entry .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1not-accessiblecurrent
alaBgpAspathMatchListId
OBJECT-TYPE
Identifier of this list of autonomous system path matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpAspathMatchListRegExp
OBJECT-TYPE
The regular expression identifying the autnomous system paths to be matched by this instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.2SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpAspathMatchListPriority
OBJECT-TYPE
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.3Integer32 (1..255)read-createcurrent
alaBgpAspathMatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.4INTEGER {permit(1), deny(2)}read-createcurrent
alaBgpAspathMatchListRowStatus
OBJECT-TYPE
Row status variable
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.5RowStatusread-createcurrent
alaBgpAspathMatchListSubIndex
OBJECT-TYPE
The primary index of this list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.6Integer32 (1..255)read-onlycurrent
alaBgpPrefixMatchListTable
OBJECT-TYPE
BGP Policy prefix matching criteria table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3not-accessiblecurrent
alaBgpPrefixMatchListEntry
OBJECT-TYPE
BGP Prefix matching instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1not-accessiblecurrent
alaBgpPrefixMatchListId
OBJECT-TYPE
Identifier of this list of autonomous system path matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpPrefixMatchListAddr
OBJECT-TYPE
The address to be matched.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.2IpAddressread-onlycurrent
alaBgpPrefixMatchListMask
OBJECT-TYPE
The mask to be matched.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.3IpAddressread-onlycurrent
alaBgpPrefixMatchListGE
OBJECT-TYPE
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.4Integer32 (0..32)read-createcurrent
alaBgpPrefixMatchListLE
OBJECT-TYPE
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE and <= 32.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.5Integer32 (0..32)read-createcurrent
alaBgpPrefixMatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.6INTEGER {permit(1), deny(2)}read-createcurrent
alaBgpPrefixMatchListRowStatus
OBJECT-TYPE
Row status variable
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.7RowStatusread-createcurrent
alaBgpCommunityMatchListTable
OBJECT-TYPE
BGP Policy Community criteria matching table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4not-accessiblecurrent
alaBgpCommunityMatchListEntry
OBJECT-TYPE
Community matching entry .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1not-accessiblecurrent
alaBgpCommunityMatchListId
OBJECT-TYPE
Identifier of this list of communities matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpCommunityMatchListString
OBJECT-TYPE
The string identifying the communities to be matched by this instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.2SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpCommunityMatchListPriority
OBJECT-TYPE
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.3Integer32 (0..255)read-createcurrent
alaBgpCommunityMatchListType
OBJECT-TYPE
This determines the matching type.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.4INTEGER {exact(1), occur(2)}read-createcurrent
alaBgpCommunityMatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.5INTEGER {permit(1), deny(2)}read-createcurrent
alaBgpCommunityMatchListRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.6RowStatusread-createcurrent
alaBgpCommunityMatchListSubIndex
OBJECT-TYPE
The primary index of this list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.7Integer32 (1..255)read-onlycurrent
alaBgpAspathPriMatchListTable
OBJECT-TYPE
Priority sorted view of BGP Policy Aspath matching table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5not-accessiblecurrent
alaBgpAspathPriMatchListEntry
OBJECT-TYPE
Aspath matching entry .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1not-accessiblecurrent
alaBgpAspathPriMatchListId
OBJECT-TYPE
Identifier of this list of autonomous system path matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpAspathPriMatchListPriority
OBJECT-TYPE
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.2Integer32 (0..255)read-onlycurrent
alaBgpAspathPriMatchListIntIdx
OBJECT-TYPE
This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.3Integer32 (0..2147483647)read-onlycurrent
alaBgpAspathPriMatchListRegExp
OBJECT-TYPE
The regular expression identifying the autnomous system paths to be matched by this instance
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.4SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpAspathPriMatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.5INTEGER {permit(1), deny(2)}read-onlycurrent
alaBgpAspathPriMatchListRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.6RowStatusread-createcurrent
alaBgpCommunityPriMatchListTable
OBJECT-TYPE
Priority sorted view of BGP Policy Community matching table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6not-accessiblecurrent
alaBgpCommunityPriMatchListEntry
OBJECT-TYPE
Community matching entry .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1not-accessiblecurrent
alaBgpCommunityPriMatchListId
OBJECT-TYPE
Identifier of this list of communities matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.1SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpCommunityPriMatchListPriority
OBJECT-TYPE
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.2Integer32 (0..255)read-onlycurrent
alaBgpCommunityPriMatchListIntIdx
OBJECT-TYPE
This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.3Integer32 (0..2147483647)read-onlycurrent
alaBgpCommunityPriMatchListString
OBJECT-TYPE
The string identifying the communities to be matched by this instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.4SnmpAdminString (SIZE(1..70))read-onlycurrent
alaBgpCommunityPriMatchListType
OBJECT-TYPE
This determines the matching type.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.5INTEGER {exact(1), occur(2)}read-onlycurrent
alaBgpCommunityPriMatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.6INTEGER {permit(1), deny(2)}read-onlycurrent
alaBgpCommunityPriMatchListRowStatus
OBJECT-TYPE
Row status variable
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.7RowStatusread-createcurrent
alaBgpPrefix6MatchListTable
OBJECT-TYPE
BGP Policy prefix6 matching criteria table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7not-accessiblecurrent
alaBgpPrefix6MatchListEntry
OBJECT-TYPE
BGP Prefix6 matching instance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1not-accessiblecurrent
alaBgpPrefix6MatchListId
OBJECT-TYPE
Identifier of this list of autonomous system path matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.1SnmpAdminString (SIZE(1..70))not-accessiblecurrent
alaBgpPrefix6MatchListAddr
OBJECT-TYPE
The IPv6 Prefix to be matched. A value of 0 indicates default route prefix.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.2Ipv6Addressnot-accessiblecurrent
alaBgpPrefix6MatchListAddrLength
OBJECT-TYPE
The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.3Integer32 (0..128)not-accessiblecurrent
alaBgpPrefix6MatchListGE
OBJECT-TYPE
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListGE must be > length of (alaBgpPrefix6MatchListAddrLength) and < alaBgpPrefix6MatchListLE.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.4Integer32 (0..128)read-createcurrent
alaBgpPrefix6MatchListLE
OBJECT-TYPE
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListLE must be >= alaBgpPrefix6MatchListGE and <= 128.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.5Integer32 (0..128)read-createcurrent
alaBgpPrefix6MatchListAction
OBJECT-TYPE
This determines whether to accept or reject a matching route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.6INTEGER {permit(1), deny(2)}read-createcurrent
alaBgpPrefix6MatchListRowStatus
OBJECT-TYPE
Row status variable
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.7RowStatusread-createcurrent
alaBgpNetwork6Table
OBJECT-TYPE
BGP Network6 configuration table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9not-accessiblecurrent
alaBgpNetwork6Entry
OBJECT-TYPE
BGP Network6 entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1not-accessiblecurrent
alaBgpNetwork6Addr
OBJECT-TYPE
The IPv6 address of the BGP Network.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.1Ipv6Address (SIZE(16))read-onlycurrent
alaBgpNetwork6MaskLen
OBJECT-TYPE
The number of bits that are significant in the IPv6 address prefix of the BGP Network.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.2Integer32 (0..128)read-onlycurrent
alaBgpNetwork6State
OBJECT-TYPE
Indicates whether the network is being actively advertised or not.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
alaBgpNetwork6Metric
OBJECT-TYPE
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.4Gauge32 (0..4294967295)read-createcurrent
alaBgpNetwork6LocalPref
OBJECT-TYPE
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.5Gauge32 (0..4294967295)read-createcurrent
alaBgpNetwork6Community
OBJECT-TYPE
The value to set the COMMUNITY attribute when advertising this network.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.6SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpNetwork6RowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.7RowStatusread-createcurrent
alaBgpRoute6Table
OBJECT-TYPE
BGP IPv6 Routing table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10not-accessiblecurrent
alaBgpRoute6Entry
OBJECT-TYPE
BGP Route entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1not-accessiblecurrent
alaBgpRoute6Addr
OBJECT-TYPE
Destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.1Ipv6Addressread-onlycurrent
alaBgpRoute6MaskLen
OBJECT-TYPE
Destination address length.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.2Integer32 (0..128)read-onlycurrent
alaBgpRoute6State
OBJECT-TYPE
Indicates whether the route is being actively advertised or not.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.3INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6Paths
OBJECT-TYPE
Number of total paths available to this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.4Counter32read-onlycurrent
alaBgpRoute6FeasiblePaths
OBJECT-TYPE
Number of Feasible paths available to this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.5Counter32read-onlycurrent
alaBgpRoute6NextHop
OBJECT-TYPE
The BGP Nexthop to reach this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.6Ipv6Addressread-onlycurrent
alaBgpRoute6IgpNextHop
OBJECT-TYPE
The IGP Nexthop to reach this destination.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.7Ipv6Addressread-onlycurrent
alaBgpRoute6IsHidden
OBJECT-TYPE
Indicates whether the route is hidden by an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.8INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsAggregate
OBJECT-TYPE
Indicates whether the route is an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.9INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsAggregateContributor
OBJECT-TYPE
Indicates whether the route is a contributor to an aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.10INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6AdvNeighbors
OBJECT-TYPE
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.11SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpRoute6IsAggregateList
OBJECT-TYPE
Indicates whether the route is on an aggregate list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.12INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsAggregateWait
OBJECT-TYPE
Indicates whether the route is an aggregate waiting for a contributor.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.13INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsOnEbgpChgList
OBJECT-TYPE
Indicates whether the route is placed on list of EBGP routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.14INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsOnIbgpClientChgList
OBJECT-TYPE
Indicates whether the route is placed on list of IBGP reflector-client routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.15INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsOnIbgpChgList
OBJECT-TYPE
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.16INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsOnLocalChgList
OBJECT-TYPE
Indicates whether the route is placed on list of local routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.17INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsOnDeleteList
OBJECT-TYPE
Indicates whether the route is placed on delete list.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.18INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpRoute6IsDampened
OBJECT-TYPE
Indicates whether the route is being route flap dampened.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.19INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpPath6Table
OBJECT-TYPE
BGP Path table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11not-accessiblecurrent
alaBgpPath6Entry
OBJECT-TYPE
BGP path6 entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1not-accessiblecurrent
alaBgpPath6Addr
OBJECT-TYPE
Destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.1Ipv6Addressread-onlycurrent
alaBgpPath6MaskLen
OBJECT-TYPE
Destination address length.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.2Integer32 (0..128)read-onlycurrent
alaBgpPath6PeerBgpId
OBJECT-TYPE
The BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.3IpAddressread-onlycurrent
alaBgpPath6SrcProto
OBJECT-TYPE
The protocol from which the path was learnt.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.4INTEGER {other(1), local(2), static(3), directHost(4), rip(5), ospf(6), isis(7), ebgp(9), ibgp(10), aggregate(11), network(12)}read-onlycurrent
alaBgpPath6Weight
OBJECT-TYPE
The weight assigned to this path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.5Integer32 (0..2147483647)read-onlycurrent
alaBgpPath6Pref
OBJECT-TYPE
The degree of preference assigned to this path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.6Gauge32read-onlycurrent
alaBgpPath6State
OBJECT-TYPE
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.7INTEGER {best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7)}read-onlycurrent
alaBgpPath6Origin
OBJECT-TYPE
The ORIGIN attribute of the path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.8INTEGER {igp(1), egp(2), incomplete(3), none(9)}read-onlycurrent
alaBgpPath6NextHop
OBJECT-TYPE
The NEXTHOP attribute of the path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.9Ipv6Addressread-onlycurrent
alaBgpPath6As
OBJECT-TYPE
The sequence of AS path segments. Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>. The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.10SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPath6LocalPref
OBJECT-TYPE
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.11Integer32 (-1..2147483647)read-onlycurrent
alaBgpPath6Med
OBJECT-TYPE
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.12Gauge32 (0..4294967295)read-onlycurrent
alaBgpPath6Atomic
OBJECT-TYPE
Indicates whether this path is generated without selecting a less specific route.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.13INTEGER {yes(1), no(2)}read-onlycurrent
alaBgpPath6AggregatorAs
OBJECT-TYPE
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.14InetAutonomousSystemNumberread-onlycurrent
alaBgpPath6AggregatorAddr
OBJECT-TYPE
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.15IpAddressread-onlycurrent
alaBgpPath6Community
OBJECT-TYPE
The community attribute of the path. The communities are represented as series of 4 octet values.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.16SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPath6UnknownAttr
OBJECT-TYPE
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.17OCTET STRING (SIZE(0..255))read-onlycurrent
alaBgpPath6OriginatorId
OBJECT-TYPE
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.18IpAddressread-onlycurrent
alaBgpPath6ClusterList
OBJECT-TYPE
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.19SnmpAdminString (SIZE(0..255))read-onlycurrent
alaBgpPath6PeerName
OBJECT-TYPE
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.20SnmpAdminString (SIZE(0..60))read-onlycurrent
alaBgpPeer6Table
OBJECT-TYPE
BGP IPv6 peer table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12not-accessiblecurrent
alaBgpPeer6Entry
OBJECT-TYPE
BGP IPv6 Peer configuration entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1not-accessiblecurrent
alaBgpPeer6Addr
OBJECT-TYPE
Ipv6 Address of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.1Ipv6Addressread-onlycurrent
alaBgpPeer6AS
OBJECT-TYPE
Autonomous system of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.2InetAutonomousSystemNumberread-createcurrent
alaBgpPeer6Passive
OBJECT-TYPE
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.3INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6Name
OBJECT-TYPE
A symbolic name for the neighbour.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.4SnmpAdminString (SIZE(0..60))read-createcurrent
alaBgpPeer6MultiHop
OBJECT-TYPE
If enabled the external peer is allowed to be multiple hops away.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.5INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6MaxPrefix
OBJECT-TYPE
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.6Gauge32 (0..2147483647)read-createcurrent
alaBgpPeer6MaxPrefixWarnOnly
OBJECT-TYPE
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP switch logging for type 'warnings' must be activated and level set to info.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.7INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6NextHopSelf
OBJECT-TYPE
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the IPv6 address of the interface attached to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.8INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6SoftReconfig
OBJECT-TYPE
Enable/Disable dynamic policy configurability on the connection to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.9INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6InSoftReset
OBJECT-TYPE
Route refresh capability is Enabled/Disabled on the connection to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeer6Ipv4Unicast
OBJECT-TYPE
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeer6Ipv4Multicast
OBJECT-TYPE
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer .
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeer6RcvdRtRefreshMsgs
OBJECT-TYPE
The number of route refresh messages received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.13Counter32read-onlycurrent
alaBgpPeer6SentRtRefreshMsgs
OBJECT-TYPE
The number of route refresh messages sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.14Counter32read-onlycurrent
alaBgpPeer6RouteMapOut
OBJECT-TYPE
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.15SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6RouteMapIn
OBJECT-TYPE
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.16SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6LocalAddr
OBJECT-TYPE
Local IPv6 address of this connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.17Ipv6Addressread-createcurrent
alaBgpPeer6LastDownReason
OBJECT-TYPE
The general reason for termination of last established session with the peer since the protocol was operationally up.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.18INTEGER {userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9)}read-onlycurrent
alaBgpPeer6LastDownTime
OBJECT-TYPE
The time elapsed since the BGP session with the peer was terminated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.19TimeTicksread-onlycurrent
alaBgpPeer6LastReadTime
OBJECT-TYPE
The time elapsed since we last read data from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.20TimeTicksread-onlycurrent
alaBgpPeer6RcvdNotifyMsgs
OBJECT-TYPE
The Number of notification messages received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.21Counter32read-onlycurrent
alaBgpPeer6SentNotifyMsgs
OBJECT-TYPE
The Number of notification messages sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.22Counter32read-onlycurrent
alaBgpPeer6LastSentNotifyReason
OBJECT-TYPE
The last notification reason sent.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.23INTEGER {msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)}read-onlycurrent
alaBgpPeer6LastRecvNotifyReason
OBJECT-TYPE
The last notification reason received.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.24INTEGER {msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)}read-onlycurrent
alaBgpPeer6RcvdPrefixes
OBJECT-TYPE
The Number of prefixes received from this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.25Counter32read-onlycurrent
alaBgpPeer6DownTransitions
OBJECT-TYPE
The Number of times this peer session transitioned to IDLE state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.26Counter32read-onlycurrent
alaBgpPeer6Type
OBJECT-TYPE
This indicates whether the peer belongs to the local autonomous system(internal) or another autonomous system.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.27INTEGER {internal(1), external(2)}read-onlycurrent
alaBgpPeer6ClearCounter
OBJECT-TYPE
Setting a value of clear into this variable will clear the per peer statistics.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.28INTEGER {clear(1)}read-createcurrent
alaBgpPeer6AutoReStart
OBJECT-TYPE
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.29INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6ClientStatus
OBJECT-TYPE
If enabled this peer is a route reflection client.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.30INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6ConfedStatus
OBJECT-TYPE
If enabled this peer is a member of our confederation.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.31INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6RemovePrivateAs
OBJECT-TYPE
If enabled private as numbers are stripped out in the updates sent to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.32INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6TTL
OBJECT-TYPE
TTL count for packets on this TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.33Integer32 (0..255)read-createcurrent
alaBgpPeer6AspathListOut
OBJECT-TYPE
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.34SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6AspathListIn
OBJECT-TYPE
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.35SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6PrefixListOut
OBJECT-TYPE
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.36SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6PrefixListIn
OBJECT-TYPE
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.37SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6CommunityListOut
OBJECT-TYPE
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.38SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6CommunityListIn
OBJECT-TYPE
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.39SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6Restart
OBJECT-TYPE
Setting a value of restart into this variable will restart the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.40INTEGER {restart(1)}read-createcurrent
alaBgpPeer6DefaultOriginate
OBJECT-TYPE
If enabled a default route is sent to this neighbour.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.41INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpPeer6ReconfigureInBound
OBJECT-TYPE
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.42INTEGER {reconfigure(1)}read-createcurrent
alaBgpPeer6ReconfigureOutBound
OBJECT-TYPE
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.43INTEGER {reconfigure(1)}read-createcurrent
alaBgpPeer6MD5Key
OBJECT-TYPE
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.44SnmpAdminString (SIZE(0..80))read-createcurrent
alaBgpPeer6MD5KeyEncrypt
OBJECT-TYPE
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.45OCTET STRING (SIZE(0..512))read-onlycurrent
alaBgpPeer6RowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.46RowStatusread-createcurrent
alaBgpPeer6UpTransitions
OBJECT-TYPE
The Number of times this peer session transitioned to ESTABLISHED state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.47Counter32read-onlycurrent
alaBgpPeer6LastWriteTime
OBJECT-TYPE
The time elapsed since we last sent data to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.48TimeTicksread-onlycurrent
alaBgpPeer6RcvdMsgs
OBJECT-TYPE
The Number of messages received from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.49Counter32read-onlycurrent
alaBgpPeer6SentMsgs
OBJECT-TYPE
The Number of messages sent to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.50Counter32read-onlycurrent
alaBgpPeer6RcvdUpdMsgs
OBJECT-TYPE
The Number of update messages received from the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.51Counter32read-onlycurrent
alaBgpPeer6SentUpdMsgs
OBJECT-TYPE
The Number of update messages sent to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.52Counter32read-onlycurrent
alaBgpPeer6LastTransitionTime
OBJECT-TYPE
The time elapsed since the BGP session was operationally up or down to the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.53TimeTicksread-onlycurrent
alaBgpPeer6LastUpTime
OBJECT-TYPE
The time elapsed since the BGP session with the peer was established.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.54TimeTicksread-onlycurrent
alaBgpPeer6BgpId
OBJECT-TYPE
BGP Identifier of the peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.55IpAddressread-onlycurrent
alaBgpPeer6LocalIntfName
OBJECT-TYPE
The user defined name used to identify the local IPv6 interface for this peer's TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.56SnmpAdminString (SIZE(0..20))read-createcurrent
alaBgpPeer6RestartTime
OBJECT-TYPE
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.57Integer32 (0..3600)read-onlycurrent
alaBgpPeer6RestartState
OBJECT-TYPE
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.58INTEGER {notRestarting(1), restarting(2), none(3)}read-onlycurrent
alaBgpPeer6RestartFwdState
OBJECT-TYPE
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.59INTEGER {notPreserved(1), preserved(2)}read-onlycurrent
alaBgpPeer6Ipv6Unicast
OBJECT-TYPE
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.60INTEGER {enabled(1), disabled(2)}read-onlycurrent
alaBgpPeer6HoldTime
OBJECT-TYPE
Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the session has not been established with the peer, or, the value of alaBgpPeer6HoldTimeConfigured is zero (0).
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.61Integer32 (0 | 3..65535)read-onlycurrent
alaBgpPeer6KeepAlive
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with alaBgpPeer6HoldTime, it has the same proportion as what alaBgpPeer6KeepAliveConfigured has when compared with alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), it indicates that the session has not been established with the peer, or, the value of alaBgpPeer6KeepAliveConfigured is zero (0).
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.62Integer32 (0 | 1..21845)read-onlycurrent
alaBgpPeer6ConnRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.63Integer32 (1..65535)read-createcurrent
alaBgpPeer6HoldTimeConfigured
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (alaBgpPeer6HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be negotiated with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.64Integer32 (0 | 3..65535)read-createcurrent
alaBgpPeer6KeepAliveConfigured
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in alaBgpPeer6HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by alaBgpPeer6KeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.65Integer32 (0 | 1..21845)read-createcurrent
alaBgpPeer6Ipv4NextHop
OBJECT-TYPE
The IPv4 nexthop address to be used for IPv4 routes advertised to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.66IpAddressread-createcurrent
alaBgpPeer6Ipv6NextHop
OBJECT-TYPE
The IPv6 nexthop address to be used for IPv6 routes advertised to this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.67Ipv6Addressread-createcurrent
alaBgpPeer6AdminStatus
OBJECT-TYPE
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.68INTEGER {stop(1), start(2)}read-createcurrent
alaBgpPeer6State
OBJECT-TYPE
The BGP peer connection state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.69INTEGER {idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)}read-onlycurrent
alaBgpPeer6LocalPort
OBJECT-TYPE
The local port number for this peer's TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.70Integer32 (0..65535)read-onlycurrent
alaBgpPeer6TcpWindowSize
OBJECT-TYPE
The size of the socket buffers, in bytes, used for this TCP connection.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.71Integer32 (0..65535)read-onlycurrent
alaBgpPeer6ActivateIpv6
OBJECT-TYPE
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.72INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeer6MinRouteAdvertisementInterval
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.73Integer32 (1..65535)read-createcurrent
alaBgpPeer6Prefix6ListOut
OBJECT-TYPE
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.74SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6Prefix6ListIn
OBJECT-TYPE
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.75SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpPeer6ActivateIpv4
OBJECT-TYPE
If enabled, the Multiprotocol IPv4 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.76INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeer6BfdStatus
OBJECT-TYPE
Enables/Disables BFd for a particular Peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.77INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpPeer6TTLSecurityHops
OBJECT-TYPE
The maximum number of hops (0..255) a BGP packet may traverse when the Generalized TTL Security Mechansim is enabled for this peer. A value of 256, the default, indicates that GTSM is not enabled for communication with this peer.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.78Integer32 (0..256)read-createcurrent
alaBgpPeer6CheckFirstAS
OBJECT-TYPE
This object is used to check for first AS in the received ASPATH
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.79INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpL2vpnVplsTable
OBJECT-TYPE
BGP L2vpn table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13not-accessiblecurrent
alaBgpL2vpnVplsEntry
OBJECT-TYPE
BGP L2VPN VPLS entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1not-accessiblecurrent
alaBgpL2vpnVplsId
OBJECT-TYPE
The configured VPLS identifier.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.1Unsigned32not-accessiblecurrent
alaBgpL2vpnVplsNbrAddrType
OBJECT-TYPE
InetAddressIPv4 (1) type is supported.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.2InetAddressType {unknown(0), ipv4(1)}not-accessiblecurrent
alaBgpL2vpnVplsNbrAddr
OBJECT-TYPE
The IP address of the peer that is advertising this vpls path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.3InetAddress (SIZE(4 | 16))not-accessiblecurrent
alaBgpL2vpnVplsProtocol
OBJECT-TYPE
The protocol from which this route path was learned. Possible values for this field are as follows: local, ibgp.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.4INTEGER {local(1), ibgp(2), ebgp(3)}read-onlycurrent
alaBgpL2vpnVplsVeId
OBJECT-TYPE
The configured VPLS Edge Id.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.5Unsigned32 (0..65535)read-onlycurrent
alaBgpL2vpnVplsRouteTarget
OBJECT-TYPE
The route-target value.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.6SnmpAdminString (SIZE(0..32))read-onlycurrent
alaBgpL2vpnVplsRouteDistinguisher
OBJECT-TYPE
The route-distinguisher value.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.7SnmpAdminString (SIZE(0..32))read-onlycurrent
alaBgpL2vpnVplsDiscoveredPeerNum
OBJECT-TYPE
The number of VPLS peers with which pseudo wire is established and labels/demultiplexers are exchanged.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.8Unsigned32read-onlycurrent
alaBgpL2vpnVplsVeBlockOffset
OBJECT-TYPE
The block offset advertised by peer. In case of local entry, value is 0.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.9Unsigned32 (0..65535)read-onlycurrent
alaBgpL2vpnVplsVeBlockSize
OBJECT-TYPE
The block size advertised by peer. In case of local entry, value is 0.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.10Unsigned32read-onlycurrent
alaBgpL2vpnVplsLabelBase
OBJECT-TYPE
The label base advertised by peer. In case of local entry, value is 0.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.11Unsigned32read-onlycurrent
alaBgpL2vpnVplsNextHopAddrType
OBJECT-TYPE
InetAddressIPv4 (1) type is supported.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.12InetAddressType {ipv4(1)}read-onlycurrent
alaBgpL2vpnVplsNextHopAddr
OBJECT-TYPE
The next hop along the route path.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.13InetAddress (SIZE(4))read-onlycurrent
alaBgpL2vpnVplsOrigin
OBJECT-TYPE
The BGP origin attribute. Possible values will be igp.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.14INTEGER {none(1), ibgp(2), egp(3), incomplete(4)}read-onlycurrent
alaBgpL2vpnVplsLocalPreference
OBJECT-TYPE
The local preference value for this route as received in an UPDATE message. It is always the default value 100.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.15Unsigned32 (0..65535)read-onlycurrent
alaBgpL2vpnVplsIfMtu
OBJECT-TYPE
The Layer-2 MTU value which was encoded in the Layer2 Info Extended Community attribute in the UPDATE message.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.16Unsigned32 (0..65535)read-onlycurrent
alaBgpTemplateTable
OBJECT-TYPE
BGP Template table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14not-accessiblecurrent
alaBgpTemplateEntry
OBJECT-TYPE
BGP Template entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1not-accessiblecurrent
alaBgpTemplateName
OBJECT-TYPE
The bgp template name.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.1SnmpAdminString (SIZE(0..60))not-accessiblecurrent
alaBgpTemplateRowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.2RowStatusread-createcurrent
alaBgpTemplateActivateEvpn
OBJECT-TYPE
Activate EVPN template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.3INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpTemplateActivateIpv4
OBJECT-TYPE
Activate Ipv4 template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.4INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpTemplateActivateIpv6
OBJECT-TYPE
Activate Ipv6 template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
alaBgpTemplateClientStatus
OBJECT-TYPE
Route reflection client template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.6INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpTemplateTTLSecurityHops
OBJECT-TYPE
TTL Security Template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.7Integer32 (0..256)read-createcurrent
alaBgpTemplateRemoteAs
OBJECT-TYPE
Remote as template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.8Unsigned32read-createcurrent
alaBgpTemplateBfdState
OBJECT-TYPE
Bfd state template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.9INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpTemplateUpdateSource
OBJECT-TYPE
Update source template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.10IpAddressread-createcurrent
alaBgpTemplateEvpnNbrTypeFabric
OBJECT-TYPE
Evpn nbr type fabric template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.11INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpTemplateUpdateSourceStr
OBJECT-TYPE
Update source string template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.12SnmpAdminStringread-createcurrent
alaBgpNotificationObj
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15
alaBgpEvpnTrapCode
OBJECT-TYPE
Trap code of the particular trap being generated. The different trap scenarios are like mac or IP move, filter, disable while handling RT2 across east-west and north-south VTEPs, configuration errors and etc.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.1Unsigned32 (1..23)accessible-for-notifycurrent
alaBgpEvpnTrapInfoMacAddr
OBJECT-TYPE
The MAC address used for VLAN classification.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.2MacAddressaccessible-for-notifycurrent
alaBgpEvpnTrapInfoEvi
OBJECT-TYPE
Bgp evpn trap info evi.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.3Unsigned32accessible-for-notifycurrent
alaBgpEvpnTrapInfoCeAddrType
OBJECT-TYPE
The IP address type of CE.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.4InetAddressTypeaccessible-for-notifycurrent
alaBgpEvpnTrapInfoCeAddr
OBJECT-TYPE
The IP address of CE for which the trap error is being generated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.5InetAddressaccessible-for-notifycurrent
alaBgpEvpnTrapInfoPeAddrType
OBJECT-TYPE
The ip address type of PE.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.6InetAddressTypeaccessible-for-notifycurrent
alaBgpEvpnTrapInfoPeAddr
OBJECT-TYPE
The ip address of PE from which the trap error is being generated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.7InetAddressaccessible-for-notifycurrent
alaBgpEvpnTrapInfoFibStatus
OBJECT-TYPE
The Fib status of the mac-vrf entry for which the trap error is being generated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.8INTEGER {enable(1), disable(2)}accessible-for-notifycurrent
alaBgpEvpnTrapInfoLocality
OBJECT-TYPE
The Locality of the mac-vrf entry for which the trap error is being generated.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.15.9INTEGER {default(0), sap(1), sBind(2)}accessible-for-notifycurrent
alaBgpAggr6Table
OBJECT-TYPE
BGP IPv6 Aggregate configuration table.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16not-accessiblecurrent
alaBgpAggr6Entry
OBJECT-TYPE
BGP IPv6 Aggregation entry.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1not-accessiblecurrent
alaBgpAggr6Addr
OBJECT-TYPE
IPv6 Aggregate address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.1Ipv6Addressread-onlycurrent
alaBgpAggr6MaskLen
OBJECT-TYPE
The number of bits that are significant in the IPv6 Aggregate Address.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.2Integer32 (0..128)read-onlycurrent
alaBgpAggr6Summarize
OBJECT-TYPE
If enabled only IPv6 aggregate is advertised. Otherwise more specific routes are also advertised.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.3INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpAggr6Set
OBJECT-TYPE
If enabled IPv6 aggregate all aspaths.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.4INTEGER {enable(1), disable(2)}read-createcurrent
alaBgpAggr6State
OBJECT-TYPE
If active the IPv6 aggregate is actively being advertised.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.5INTEGER {active(1), inactive(2)}read-onlycurrent
alaBgpAggr6Metric
OBJECT-TYPE
This specifies the MED to be used when advertising this IPv6 aggregate to external peers. A value of 0 indicates not to send MED.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.6Gauge32 (0..4294967295)read-createcurrent
alaBgpAggr6LocalPref
OBJECT-TYPE
This specifies the override default LOCAL PREF to be used when advertising this IPv6 aggregate to internal peers. A value of 0 indicates not to override the default.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.7Gauge32 (0..4294967295)read-createcurrent
alaBgpAggr6Community
OBJECT-TYPE
The value to set the COMMUNITY attribute when advertising this IPv6 aggregate.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.8SnmpAdminString (SIZE(0..70))read-createcurrent
alaBgpAggr6RowStatus
OBJECT-TYPE
Row status variable.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.16.1.9RowStatusread-createcurrent
alcatelIND1BGPMIBConformance
OBJECT-IDENTITY
Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2current
alcatelIND1BGPMIBGroups
OBJECT-IDENTITY
Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1current
alcatelIND1BGPMIBCompliances
OBJECT-IDENTITY
Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2current

Notifications

NameOIDStatus
alaBgpEvpnTrapError
NOTIFICATION-TYPE
The trap shall be raised when getting trap error.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.0.1current

Conformance

NameOIDStatus
alabgpMIBGlobalsGroup
OBJECT-GROUP
A collection of objects providing information on global BGP state.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.1current
alabgpMIBPeerGroup
OBJECT-GROUP
A collection of objects for managing BGP peers.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.2current
alabgpMIBAggrGroup
OBJECT-GROUP
A collection of objects for managing BGP aggregates.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.3current
alabgpMIBNetworkGroup
OBJECT-GROUP
A collection of objects for managing BGP networks.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.4current
alabgpMIBRouteGroup
OBJECT-GROUP
A collection of objects for managing BGP routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.5current
alabgpMIBPathAttrGroup
OBJECT-GROUP
A collection of objects for managing BGP paths attributes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.6current
alabgpMIBDampGroup
OBJECT-GROUP
A collection of objects for managing BGP dampening.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.7current
alabgpMIBRouteMapGroup
OBJECT-GROUP
A collection of objects for managing BGP route maps.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.8current
alabgpMIBAspathListGroup
OBJECT-GROUP
A collection of objects for managing BGP aspath lists.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.9current
alabgpMIBPrefixListGroup
OBJECT-GROUP
A collection of objects for managing BGP prefix lists.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.10current
alabgpMIBCommunityListGroup
OBJECT-GROUP
A collection of objects for managing BGP community lists.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.11current
alabgpMIBAspathPriListGroup
OBJECT-GROUP
A collection of objects for managing BGP aspath lists by priority.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.12current
alabgpMIBCommunityPriListGroup
OBJECT-GROUP
A collection of objects for managing BGP community lists by priority.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.13current
alabgpMIBNetwork6Group
OBJECT-GROUP
A collection of objects for managing BGP IPv6 networks.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.14current
alabgpMIBRoute6Group
OBJECT-GROUP
A collection of objects for managing BGP routes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.15current
alabgpMIBPath6AttrGroup
OBJECT-GROUP
A collection of objects for managing BGP paths attributes.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.16current
alabgpMIBPeer6Group
OBJECT-GROUP
A collection of objects for managing BGP peers.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.17current
alaBgpPrefix6MatchListEntryGroup
OBJECT-GROUP
Identifier of this list of autonomous system path matching criteria.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.18current
alaBgpL2vpnVplsEntryGroup
OBJECT-GROUP
A collection of objects for managing BGP L2vpn VPLS.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.19current
alaBgpTemplateGroup
OBJECT-GROUP
A collection of objects for managing BGP Template.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.20current
alaBgpEvpnGroup
OBJECT-GROUP
A collection of objects for BGP EVPN trap Information.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.21current
alaBgpNotificationGroup
NOTIFICATION-GROUP
A collection of objects for notifications.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.22current
alabgpMIBAggr6Group
OBJECT-GROUP
A collection of objects for managing IPv6 BGP aggregates.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.23current
alcatelIND1BGPMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the BGP4 mib.
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2.1current