MIBs Depot

ALCATEL-IND1-AUTO-FABRIC-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.75.1
Last updated
2019-11-27 00:00
Organization
ALE USA Inc.
Revisions
2019-11-27 00:00, 2012-11-25 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-AUTO-FABRIC-MIB
Digest
sha256:a487475e7708e3940558eba9b3912e74d27f55471ea6f7d4e96684a5ddeba912

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the OmniSwitch Product Line AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEsoftentIND1AutoFabric
IF-MIBInterfaceIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-AUTO-FABRIC-MIB
ALCATEL-IND1-BASE
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1AUTOFABRICMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.75.1.0
alcatelIND1AUTOFABRICMIBObjects
OBJECT-IDENTITY
Branch For AUTO-FABRIC Subsystem Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1current
alaAutoFabricGlobalStatus
OBJECT-TYPE
This variable is used to enable or diable Autofabric on the switch. The value enable (1) indicates that Autofabric should be enabled on the switch. The value disable (2) is used to disable Autofabric on the switch. By default, Autofabric is enabled on the switch.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalDiscovery
OBJECT-TYPE
Defines the global discovery window control for Autofabric. The value restart (2) indicates that Autofabric should restart global discovery window. By default, this object contains a zero value.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.2INTEGER {default(1), restart(2)}read-writecurrent
alaAutoFabricGlobalLACPProtocolStatus
OBJECT-TYPE
This variable is used to enable or diable AutoFabric LACP discovery. on the switch. The value enable (1) indicates that during discovery the switch will attempt to create LACP link aggregates. The value disable (2) indicates that there would be no attempt to create LACP link aggregates during the discovery phase. By default LACP is enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.3INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalSPBProtocolStatus
OBJECT-TYPE
This variable is used to enable or diable AutoFabric SPB discovery. on the switch. The value enable (1) indicates that during discovery the switch will attempt to create SPB adjacencies. The value disable (2) indicates that there would be no attempt to create SPB adjacencies during the discovery phase. By default SPB is enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalMVRPProtocolStatus
OBJECT-TYPE
This variable is used to enable or diable AutoFabric MVRP discovery. on the switch. The value enable (1) indicates that during discovery the switch will enable MVRP and attempt to propagate and learn VLANs. The value disable (2) indicates that MVRP would not be enabled in discovery phase. By default MVRP is enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalConfigSaveTimer
OBJECT-TYPE
Maximum period of time after which configuration built up by AutoFabric would get written to the boot.cfg or vcboot.cfg. The range supported is 60-3600 seconds.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.6Unsigned32 (60..3600)read-writecurrent
alaAutoFabricGlobalConfigSaveTimerStatus
OBJECT-TYPE
This variable is used to enable or diable AutoFabric config save timer on the switch. The value enable (1) indicates that after the expiry of the config save timer, all AutoFabric configurations would get written to the boot.cfg ot the vcboot.cfg The value disable (2) would disable the config save timer. By default it is enabled
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.7INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalDiscoveryTimer
OBJECT-TYPE
This variable is used to specify auto-fabric auto discovery interval, zero disables it, configurable Value is from 2 to 3600 minutes.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.8Unsigned32 (0..3600)read-writecurrent
alaAutoFabricPortConfig
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9
alaAutoFabricPortConfigTable
OBJECT-TYPE
A table containing Autofabric port configuration information.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1not-accessiblecurrent
alaAutoFabricPortConfigEntry
OBJECT-TYPE
An AutoFabric port configuration entry.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1not-accessiblecurrent
alaAutoFabricPortConfigIfIndex
OBJECT-TYPE
The ifindex of the port on which AutoFabric is running
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.1InterfaceIndexnot-accessiblecurrent
alaAutoFabricPortConfigStatus
OBJECT-TYPE
This variable is used to enable or diable AutoFabric on the interface. The value enable (1) indicates that AutoFabric should be enabled on the interface. The value disable (2) is used to disable AutoFabric on the interface. By default, AutoFabric is enabled on the interface.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.2INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricPortLACPProtocolStatus
OBJECT-TYPE
This variable is used to enable LACP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form LACP link aggregates. The value disable (2) indicates this port will not participate in LACP discovery phase. By default it is enabled
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.3INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricPortSPBProtocolStatus
OBJECT-TYPE
This variable is used to enable SPB in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form SPB adjacencies. The value disable (2) indicates this port will not participate in SPB discovery phase. By default it is enabled
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricPortMVRPProtocolStatus
OBJECT-TYPE
This variable is used to enable MVRP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will enable MVRP and attempt to learn and propagate VLANs. The value disable (2) indicates this port will not participate in MVRP discovery phase. By default it is enabled
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricPortStatus
OBJECT-TYPE
The state of the Autofabric discovery window on the port.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.6INTEGER {disabled(1), pending(2), complete(3)}read-onlycurrent
alaAutoFabricPortSPBDefaultProfile
OBJECT-TYPE
This object specifies the default SAP profile used on a particular port in the switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.7INTEGER {singleService(1), autoVlan(2)}read-writecurrent
alaAutoFabricRemoveGlobalConfig
OBJECT-TYPE
This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.10INTEGER {default(1), removeGlobalConfig(2)}read-writedeprecated
alaAutoFabricGlobalOSPFv2ProtocolStatus
OBJECT-TYPE
This variable is used to enable or disable auto configuration on the OSPFv2 IP Protocol on the switch.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.11INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalOSPFv3ProtocolStatus
OBJECT-TYPE
This variable is used to enable or disable auto configuration on the OSPFv3 IP Protocol on the switch.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.12INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricGlobalISISProtocolStatus
OBJECT-TYPE
This variable is used to enable or disable auto configuration on the ISIS IP Protocol on the switch.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.13INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricSPBDefaultProfile
OBJECT-TYPE
This object specifies the default SAP profile used in the Omni switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.14INTEGER {singleService(1), autoVlan(2)}read-writecurrent
alaAutoFabricLBDProtocolStatus
OBJECT-TYPE
This variable is used to enable or disable AutoFabric LBD on SAP port on the switch. The value enable (1) indicates that during discovery the switch will enable Loopback detection on UNP SAP port. The value disable (2) indicates that Loobback detection will not be enabled on UNP SAP port discovery
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.15INTEGER {enable(1), disable(2)}read-writecurrent
alaAutoFabricTrapsObj
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.16
alaAutoFabricSTPMode
OBJECT-TYPE
Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.16.1INTEGER {flatMode(1), perVlan(2)}accessible-for-notifycurrent
alaAutoFabricRemoveVCReload
OBJECT-TYPE
This variable is applicable only for Standalone configuration. It reloads the unit as a Standalone when the user chooses to disable auto fabric.
1.3.6.1.4.1.6486.801.1.2.1.75.1.1.17INTEGER {default(1), removeVCReload(2)}read-writecurrent
alcatelIND1AUTOFABRICMIBConformance
OBJECT-IDENTITY
Branch for AUTOFABRIC Module MIB Subsystem Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2current
alcatelIND1AUTOFABRICMIBGroups
OBJECT-IDENTITY
Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1current
alcatelIND1AUTOFABRICMIBCompliances
OBJECT-IDENTITY
Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.2current

Notifications

NameOIDStatus
alaAutoFabricSTPModeChangeAlert
NOTIFICATION-TYPE
This trap is sent when auto-fabric changes STP mode.
1.3.6.1.4.1.6486.801.1.2.1.75.1.0.1current

Conformance

NameOIDStatus
alaAutoFabricBaseGroup
OBJECT-GROUP
Collection of objects for management of AutoFabric Base Group.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.1current
alaAutoFabricPortConfigGroup
OBJECT-GROUP
Collection of objects for management of AutoFabric Port Configuration Table.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.2current
alaAutoFabricNotificationGroup
NOTIFICATION-GROUP
Collection of notifications for Auto-Fabric.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.3current
alaAutoFabricTrapsObjGroup
OBJECT-GROUP
Collection of notificating objects for Auto-Fabric.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.4current
alcatelIND1AUTOFABRICMIBCompliance
MODULE-COMPLIANCE
Compliance statement for AUTOFABRIC.
1.3.6.1.4.1.6486.801.1.2.1.75.1.2.2.1current