MIBs Depot

AIRESPACE-WIRELESS-MIB

Registered at
1.3.6.1.4.1.14179.2
Last updated
2024-01-12 00:00
Organization
Airespace, Inc.
Revisions
2024-01-12 00:00, 2022-09-16 00:00, 2020-12-02 00:00, 2015-09-14 00:00, 2014-06-26 00:00, 2011-09-27 00:00, 2010-02-09 00:00, 2006-04-10 00:00, 2005-10-30 00:00
Namespace
cisco
Source file
AIRESPACE-WIRELESS-MIB
Digest
sha256:db625aa552c7e69c134924abbd88d4de14922d620fcfbcd08a727f95a87a5319

Description

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information for 802.11 Access Points, LAN configuration, AAA, Mobility, IpSec, Radio Rescouce Management and 802.11 global parameters. The relationship between controller and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Station Management (SMT) This term refers to the internal management of the 802.11 protocol operations by the AP to work cooperatively with the other APs and 802.11 devices in the network. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.

Contact

Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com

Imports

FromSymbols
AIRESPACE-REF-MIBairespace
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AIRESPACE-REF-MIB
AIRESPACE-WIRELESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.14179.2.40ciscoSnmpHandshakeMIBCISCO-SNMP-HANDSHAKE-MIB

Textual conventions

NameOIDSyntaxAccessStatus
BsnSignaturePatternOffSetStart
TEXTUAL-CONVENTION
This object indicates how an offset should be applied while doing signature analysis for QOS and non-QOS data frames. This is introduced since 802.11e QOS frames have an additional 2-byte QOS header which results in the current implementation not being able to find the start of the date frames for signature analysis. The semantics of the values are as follows. sigPattStartFrm - This indicates that the required offset should be applied to the start of the data frame, before performing pattern matching of the signature on the data frame. sigPattStartFrmBody - This value indicates that the required offset should be applied to the start of the frame body, after the header, before performing pattern matching of the signature on the data frame.
current
BsnTxtSignatureMacInfo
TEXTUAL-CONVENTION
This textual convention defines the pattern followed by the LWAPP APs to perform signature analysis with the signature and report the results to the Controller. The semantics are described as follows. bsnSignatureMacAll - The Controller would set the 'Mac Info' parameter of the 'Signature Add LWAPP Message' to this value to indicate the LWAPP AP that the signature analysis and pattern matching should be tracked and reported on a per-signature and per-channel basis. bsnSignatureMacIndividual - The Controller would set the 'Mac Info' parameter of the 'Signature Add LWAPP Message' to this value to indicate the LWAPP AP that the signature analysis and pattern matching should be tracked and reported separately for individual MAC addresses, that are the sources of the received 802.11 data and/or management frames. bsnStandardSigMacBoth - The Controller would set the 'Mac Info' parameter of the 'Signature Add LWAPP Message' to this value to indicate the LWAPP AP that the signature analysis and pattern matching should be tracked on a per signature as well as per-MAC address basis.
current
ProfileState
TEXTUAL-CONVENTION
This object indicates the profile state.
current
WEPKeytype
TEXTUAL-CONVENTION
This object indicates the WEP Key type.
current

Objects

NameOIDSyntaxAccessStatus
bsnEss
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.1
bsnDot11EssTable
OBJECT-TYPE
Ess(WLAN) Configuration Table indexed by bsnDot11EssIndex. Maximum of 17 WLANs can be created on Airespace Switch. bsnDot11EssIndex of 17 is reserved for WLAN for Third Party APs(non-Airespace APs).
1.3.6.1.4.1.14179.2.1.1not-accessiblecurrent
bsnDot11EssEntry
OBJECT-TYPE
An entry in bsnDot11EssTable
1.3.6.1.4.1.14179.2.1.1.1not-accessiblecurrent
bsnDot11EssIndex
OBJECT-TYPE
Index of the Ess(WLAN) within Airespace Switch. Airespace Switch supports 517 ESS(Wlans) so index will be from 1 to 517. 517 is to be used for ESS(WLAN) created for support of Third Party APs(non-Airespace APs)
1.3.6.1.4.1.14179.2.1.1.1.1Unsigned32 (1..517)read-createcurrent
bsnDot11EssSsid
OBJECT-TYPE
SSID assigned to ESS(WLAN)
1.3.6.1.4.1.14179.2.1.1.1.2DisplayString (SIZE(1..32))read-createcurrent
bsnDot11EssSessionTimeout
OBJECT-TYPE
Maximum time of a Mobile Station session. Value of 0 means infinite time(no timeout set).
1.3.6.1.4.1.14179.2.1.1.1.4Unsigned32 (0..86400)read-createcurrent
bsnDot11EssMacFiltering
OBJECT-TYPE
A type of security policy for Mobile Stations (Clients). Select to filter clients by MAC address. By selecting this Security, you need to create MacFilters in bsnUsersTable or have MacFilters configured on Radius Servers specified in bsnRadiusAuthenticationTable
1.3.6.1.4.1.14179.2.1.1.1.5INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssAdminStatus
OBJECT-TYPE
Administrative Status of ESS(WLAN). By disabling an ESS the corresponding SSID is no longer broadcasted in AP beacons.
1.3.6.1.4.1.14179.2.1.1.1.6INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssSecurityAuthType
OBJECT-TYPE
Type of 802.11 Authentication.
1.3.6.1.4.1.14179.2.1.1.1.7INTEGER {authOpen(0), authSharedKey(1), authCiscoLeap(128)}read-onlycurrent
bsnDot11EssStaticWEPSecurity
OBJECT-TYPE
Status of Static WEP Security policy. If enabled, WEP Encryption WEP Default Key, Key Index and Key Format should also be specified.
1.3.6.1.4.1.14179.2.1.1.1.8INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssStaticWEPEncryptionType
OBJECT-TYPE
Type of Static WEP Encryption. Length of key specified in Default Key depends on this attribute.
1.3.6.1.4.1.14179.2.1.1.1.9INTEGER {wep104(0), wep40(2), wep128(3), notset(4)}read-createcurrent
bsnDot11EssStaticWEPDefaultKey
OBJECT-TYPE
Static WEP Default Key. For wep104 encryption either 26 bit hex key or 13 bit ascii key should be specified. For wep40 encryption 10 bit hex key or 5 bit ascii key should be specified. For wep128 encryption 32 bit hex key or 16 bit ascii key should be specified.
1.3.6.1.4.1.14179.2.1.1.1.10WEPKeytyperead-createcurrent
bsnDot11EssStaticWEPKeyIndex
OBJECT-TYPE
According to 802.11 standard 4 keys are supported. So 802.11 Mobile Stations(Client) can have upto 4 keys from 1 to 4. The read-only value zero indicates that there is no WEP Authentication key information available.This index is for informing Mobile Station which key it should use for Static WEP Authentication
1.3.6.1.4.1.14179.2.1.1.1.11INTEGER (0..4)read-createcurrent
bsnDot11EssStaticWEPKeyFormat
OBJECT-TYPE
This is not persistant.Reading this attribute will always return default. The format of the key specified in Airespace switch keeps record of the Index.
1.3.6.1.4.1.14179.2.1.1.1.12INTEGER {default(0), hex(1), ascii(2)}read-createcurrent
bsnDot11Ess8021xSecurity
OBJECT-TYPE
Status of 802.1X security policy.
1.3.6.1.4.1.14179.2.1.1.1.13INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11Ess8021xEncryptionType
OBJECT-TYPE
Type of 802.1X Encryption. This applies if bsnDot11Ess8021xSecurity is in enabled state.
1.3.6.1.4.1.14179.2.1.1.1.14INTEGER {wep104(0), wep40(2), wep128(3), none(4)}read-createcurrent
bsnDot11EssWPASecurity
OBJECT-TYPE
Status of WPA security policy. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.16INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssWPAEncryptionType
OBJECT-TYPE
Type of WPA Encryption. This applies when bsnDot11EssWPASecurity is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.17INTEGER {wep104(0), wep40(2), wep128(3), tkipmic(5)}read-createdeprecated
bsnDot11EssIpsecSecurity
OBJECT-TYPE
Status of IpSec (VPN) security policy. Note that this cannot be applied with Web security policy.
1.3.6.1.4.1.14179.2.1.1.1.18INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssVpnEncrTransform
OBJECT-TYPE
The Encryption algorithm employed by this Vpn(IpSec) Encryption. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.19INTEGER {tripleDes(0), none(1), des(2), aesCbc(3)}read-createcurrent
bsnDot11EssVpnAuthTransform
OBJECT-TYPE
The Hash algorithm employed by the Vpn Encrpytion. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.20INTEGER {hmacSha1(0), none(1), hmacMd5(2)}read-createcurrent
bsnDot11EssVpnIkeAuthMode
OBJECT-TYPE
The authentication type of the SA. It could be a certificate or a pre-shared key or xauthEnablePsk. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.21INTEGER {xauthEnablePsk(0), certificate(2), presharedKey(3)}read-createcurrent
bsnDot11EssVpnSharedKey
OBJECT-TYPE
VPN Shared Key. This applies only when bsnDot11EssVpnSharedKey is in enable state and bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or presharedKey.
1.3.6.1.4.1.14179.2.1.1.1.22OCTET STRING (SIZE(1..128))read-createcurrent
bsnDot11EssVpnSharedKeySize
OBJECT-TYPE
VPN Shared Key size. This applies only when bsnDot11EssVpnSharedKey is in enable state and bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or presharedKey.
1.3.6.1.4.1.14179.2.1.1.1.23Unsigned32 (0..128)read-onlycurrent
bsnDot11EssVpnIkePhase1Mode
OBJECT-TYPE
VPN IKE Phase 1 Mode type as per the IpSec standards. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.24INTEGER {agressive(0), main(1)}read-createcurrent
bsnDot11EssVpnIkeLifetime
OBJECT-TYPE
Vpn IKE's Lifetime. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.25Integer32 (1800..345600)read-createcurrent
bsnDot11EssVpnIkeDHGroup
OBJECT-TYPE
IKE's Diffie-Hellman Group. This applies only when bsnDot11EssIpsecSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.26INTEGER {group2(0), group1(1), group5(4)}read-createcurrent
bsnDot11EssIpsecPassthruSecurity
OBJECT-TYPE
Status of IpSec Passthru security policy.
1.3.6.1.4.1.14179.2.1.1.1.27INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssVpnPassthruGateway
OBJECT-TYPE
Ip address of VpnPassthru Gateway. This applies only when bsnDot11EssIpsecPassthruSecurity is in enable state.
1.3.6.1.4.1.14179.2.1.1.1.28IpAddressread-createcurrent
bsnDot11EssWebSecurity
OBJECT-TYPE
Status of Web security policy. Note this policy cannot be applied with IpSec security policy.
1.3.6.1.4.1.14179.2.1.1.1.29INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssRadioPolicy
OBJECT-TYPE
Radio Policy for a WLAN. It can either be All where it will be applicable to ALL types of protocols or it can be set to apply to combinations of 802.11a, 802.11b, 802.11g.
1.3.6.1.4.1.14179.2.1.1.1.30INTEGER {all(0), dot11bOnly(1), dot11aOnly(2), dot11gOnly(3), dot11bgOnly(4), dot11agOnly(5), dot11abOnly(6)}read-createcurrent
bsnDot11EssQualityOfService
OBJECT-TYPE
Quality of Service for a WLAN.Services such as VoIP should be set to Gold while non-discriminating services such as messaging can be set to Bronze.
1.3.6.1.4.1.14179.2.1.1.1.31INTEGER {bronze(0), silver(1), gold(2), platinum(3)}read-createcurrent
bsnDot11EssDhcpRequired
OBJECT-TYPE
DHCP required for all clients on this WLAN
1.3.6.1.4.1.14179.2.1.1.1.32INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssDhcpServerIpAddress
OBJECT-TYPE
IP Address of the DHCP Server. Make it 0.0.0.0 to disable DHCP Relay. Any value other than 0.0.0.0, it will be assumed that DHCP Relay is turned on.
1.3.6.1.4.1.14179.2.1.1.1.33IpAddressread-createcurrent
bsnDot11EssVpnContivityMode
OBJECT-TYPE
Specifies if contivity mode for the IpSec is enabled. If enabled, user needs to specify the Quote of the Day Server's IPAddress in bsnDot11EssVpnQotdServerAddress.
1.3.6.1.4.1.14179.2.1.1.1.34INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssVpnQotdServerAddress
OBJECT-TYPE
IP Address of the Quote of the Day Server.
1.3.6.1.4.1.14179.2.1.1.1.35IpAddressread-createcurrent
bsnDot11EssBlacklistTimeout
OBJECT-TYPE
Set the timeout for excluded Mobile Stations after which the mobile station will be automatically de-authenticated. Mobile Station excluded by MAC address and their status can be obtained from bsnMobileStationStatus. A timeout setting of 0 indicates no exclusion timeout is set and administrative control (bsnMobileStationDeleteAction ) is required to deauthenticate the station.
1.3.6.1.4.1.14179.2.1.1.1.37Integer32 (0..2147483647)read-createcurrent
bsnDot11EssNumberOfMobileStations
OBJECT-TYPE
No of Mobile Stations currently associated with the WLAN.
1.3.6.1.4.1.14179.2.1.1.1.38Counter32read-onlycurrent
bsnDot11EssWebPassthru
OBJECT-TYPE
For switches with version before 2.0: This is applicable only when the Web Security Type is enabled. When this attribute is enabled, it allows a client's NetBIOS packets to go through the switch before web auth is completed. (This is obsolete for Switch versions 2.0 to 2.2). For switch verions 3.0 and above: This is reintroduced as the web policy where the client is connected through the web without authentication that is there is no username/password input required. Moreover, if the bsnDot11EssWebPassthroughEmail is enabled, the user will be asked to enter an email address.
1.3.6.1.4.1.14179.2.1.1.1.39INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssCraniteSecurity
OBJECT-TYPE
Status of Cranite Passthrough Security policy. If enabled, no other security can be enabled.
1.3.6.1.4.1.14179.2.1.1.1.40INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssBlacklistingCapability
OBJECT-TYPE
This is the flag that can enable or disable the client exclusion feature for a WLAN. If enabled, the clients can be excluded by the Switch in case of repetitive auth failure and other reasons like it. If disabled, the clients cannot be excluded by the switch. The exclusion timeout value will only be effective if this feature is turned on.
1.3.6.1.4.1.14179.2.1.1.1.41INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssInterfaceName
OBJECT-TYPE
Name of the interface used by this WLAN. By default it is set to be the management interface.
1.3.6.1.4.1.14179.2.1.1.1.42DisplayString (SIZE(1..32))read-createcurrent
bsnDot11EssAclName
OBJECT-TYPE
Name of ACL for the WLAN. This is applicable only when Web Authentication is enabled as a security. An empty string value indicates that no ACL has been set (which is a valid option)
1.3.6.1.4.1.14179.2.1.1.1.43DisplayString (SIZE(0..32))read-createcurrent
bsnDot11EssAAAOverride
OBJECT-TYPE
Enable or Disable AAA override for the global WLAN parameters.
1.3.6.1.4.1.14179.2.1.1.1.44INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssWPAAuthKeyMgmtMode
OBJECT-TYPE
Enable or Disable WPA Pre-shared Key Mode. If enabled, a preshared key should be set for WPA authentication. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.45INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssWPAAuthPresharedKey
OBJECT-TYPE
WPA Authentication Preshared Key. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.46OCTET STRING (SIZE(8..63))read-createdeprecated
bsnDot11EssFortressSecurity
OBJECT-TYPE
Status of Fortress Passthrough Security policy. If enabled, no other security can be enabled.
1.3.6.1.4.1.14179.2.1.1.1.47INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssWepAllowSharedKeyAuth
OBJECT-TYPE
Enable this flag to allow Shared Key Authentication when Static WEP is enabled.
1.3.6.1.4.1.14179.2.1.1.1.48INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssL2tpSecurity
OBJECT-TYPE
Status of L2TP security policy. Note that this cannot be applied with Web security policy, Cranite or Fortress policy.
1.3.6.1.4.1.14179.2.1.1.1.49INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssWPAAuthPresharedKeyHex
OBJECT-TYPE
WPA Authentication Preshared Key in the hex format. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.50OCTET STRING (SIZE(0..40))read-createdeprecated
bsnDot11EssBroadcastSsid
OBJECT-TYPE
This attribute when enabled allows the switch to broadcast this SSID.
1.3.6.1.4.1.14179.2.1.1.1.51INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11EssExternalPolicyValidation
OBJECT-TYPE
This attribute specifies if external policy servers will be used for validation. If no servers are configured in bsnExternalPolicyServerTable then it cannot be enabled.
1.3.6.1.4.1.14179.2.1.1.1.52INTEGER {disabled(0), enabled(1)}read-createcurrent
bsnDot11EssRSNSecurity
OBJECT-TYPE
This attribute specifies status of RSN Security Policy. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.53INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssRSNWPACompatibilityMode
OBJECT-TYPE
This attribute specifies RSN security's compatibility mode with WPA. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.54INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssRSNAllowTKIPClients
OBJECT-TYPE
This attribute specifies whether TKIP clients are allowed by RSN Policy. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.55INTEGER {no(0), yes(1)}read-createdeprecated
bsnDot11EssRSNAuthKeyMgmtMode
OBJECT-TYPE
This attribute specifies whether Preshared key is used or not. If used user should specify a key between 8 and 63 characters in bsnDot11EssRSNAuthPresharedKey attribute. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.56INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssRSNAuthPresharedKey
OBJECT-TYPE
RSN Authentication Preshared Key. This applies only when bsnDot11EssRSNAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.57OCTET STRING (SIZE(8..63))read-createdeprecated
bsnDot11EssRSNAuthPresharedKeyHex
OBJECT-TYPE
RSN Authentication Preshared Key in the hex format. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.
1.3.6.1.4.1.14179.2.1.1.1.58OCTET STRING (SIZE(0..40))read-createdeprecated
bsnDot11EssIPv6Bridging
OBJECT-TYPE
When enabled, IPv6 bridging is applied on the packets.
1.3.6.1.4.1.14179.2.1.1.1.59INTEGER {disable(0), enable(1)}read-createdeprecated
bsnDot11EssRowStatus
OBJECT-TYPE
A row status type for the bsnDot11EssEntry
1.3.6.1.4.1.14179.2.1.1.1.60RowStatusread-createcurrent
bsnDot11EssWmePolicySetting
OBJECT-TYPE
When enabled, WME Policy is applied on the packets.
1.3.6.1.4.1.14179.2.1.1.1.61INTEGER {disable(0), allowed(1), required(2), invalid(3)}read-createcurrent
bsnDot11Ess80211ePolicySetting
OBJECT-TYPE
When enabled, 802.11e Policy is applied on the packets.
1.3.6.1.4.1.14179.2.1.1.1.62INTEGER {disable(0), allowed(1), required(2), invalid(3)}read-createcurrent
bsnDot11EssWebPassthroughEmail
OBJECT-TYPE
When enabled, along with the bsnDot11EssWebPassthru attribute, the client is allowed to connect by entering his/her email address on the web connection page. There is no further authentication required.
1.3.6.1.4.1.14179.2.1.1.1.63INTEGER {disable(0), enable(1)}read-createcurrent
bsnDot11Ess7920PhoneSupport
OBJECT-TYPE
When client cac limit is enabled, the 7920 Phones with old software where the Call Admission Control (CAC) Limit is Specified on the client will be supported on the WLAN. The support for clientCacLimit (by setting to value 1 or 3) cannot be enabled when the bsnDot11EssWmePolicySetting is set to allowed or required. When ap cac limit is enabled, the 7920 Phones with new software where the Call Admission Control (CAC) Limit is advertised by the AP, will be supported on the WLAN.
1.3.6.1.4.1.14179.2.1.1.1.64INTEGER {disable(0), clientCacLimit(1), apCacLimit(2), both(3)}read-createcurrent
bsnDot11EssNumApsUp
OBJECT-TYPE
It indicates the number of AP's that are broadcasting specific WLAN.Access point shall be considered up if it broadcasts specific WLAN on atleast one slot.
1.3.6.1.4.1.14179.2.1.1.1.66Unsigned32read-onlycurrent
bsnDot11EssNumApsDown
OBJECT-TYPE
It indicates the number of AP's that are not broadcasting WLAN per AP on either of the slots.
1.3.6.1.4.1.14179.2.1.1.1.67Unsigned32read-onlycurrent
bsnDot11EssRadiusAuthPrimaryServer
OBJECT-TYPE
Primary Radius Authentication Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.95DisplayString (SIZE(0..21))read-createcurrent
bsnDot11EssRadiusAuthSecondaryServer
OBJECT-TYPE
Secondary Radius Authentication Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.96DisplayString (SIZE(0..21))read-createcurrent
bsnDot11EssRadiusAuthTertiaryServer
OBJECT-TYPE
Tertiary Radius Authentication Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.97DisplayString (SIZE(0..21))read-createcurrent
bsnDot11EssRadiusAcctPrimaryServer
OBJECT-TYPE
Primary Radius Accounting Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.98DisplayString (SIZE(0..21))read-createcurrent
bsnDot11EssRadiusAcctSecondaryServer
OBJECT-TYPE
Secondary Radius Accounting Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.99DisplayString (SIZE(0..21))read-createcurrent
bsnDot11EssRadiusAcctTertiaryServer
OBJECT-TYPE
Tertiary Radius Accounting Server for this wlan.
1.3.6.1.4.1.14179.2.1.1.1.100DisplayString (SIZE(0..21))read-createcurrent
bsnMobileStationTable
OBJECT-TYPE
Mobile Station Table indexed by bsnMobileStationMacAddress. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.4not-accessiblecurrent
bsnMobileStationEntry
OBJECT-TYPE
An entry in bsnMobileStationTable.
1.3.6.1.4.1.14179.2.1.4.1not-accessiblecurrent
bsnMobileStationMacAddress
OBJECT-TYPE
802.11 MAC Address of the Mobile Station.
1.3.6.1.4.1.14179.2.1.4.1.1MacAddressread-onlycurrent
bsnMobileStationIpAddress
OBJECT-TYPE
IP Address of the Mobile Station
1.3.6.1.4.1.14179.2.1.4.1.2IpAddressread-onlycurrent
bsnMobileStationUserName
OBJECT-TYPE
User Name,if any, of the Mobile Station. This would be non empty in case of Web Authentication and IPSec.
1.3.6.1.4.1.14179.2.1.4.1.3DisplayStringread-onlycurrent
bsnMobileStationAPMacAddr
OBJECT-TYPE
802.11 Mac Address of the AP to which the Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.4.1.4MacAddressread-onlycurrent
bsnMobileStationAPIfSlotId
OBJECT-TYPE
Slot ID of AP Interface to which the mobile station is associated. The value 15 is used to indicate that the slot Id is invalid.
1.3.6.1.4.1.14179.2.1.4.1.5INTEGER (0..15)read-onlycurrent
bsnMobileStationEssIndex
OBJECT-TYPE
Ess Index of the Wlan(SSID) that is being used by Mobile Station to connect to AP
1.3.6.1.4.1.14179.2.1.4.1.6INTEGER (0..16)read-onlycurrent
bsnMobileStationSsid
OBJECT-TYPE
The SSID Advertised by Mobile Station
1.3.6.1.4.1.14179.2.1.4.1.7DisplayStringread-onlycurrent
bsnMobileStationAID
OBJECT-TYPE
AID for the mobile station
1.3.6.1.4.1.14179.2.1.4.1.8Unsigned32read-onlycurrent
bsnMobileStationStatus
OBJECT-TYPE
Status of the mobile station
1.3.6.1.4.1.14179.2.1.4.1.9INTEGER {idle(0), aaaPending(1), authenticated(2), associated(3), powersave(4), disassociated(5), tobedeleted(6), probing(7), blacklisted(8)}read-onlycurrent
bsnMobileStationReasonCode
OBJECT-TYPE
Reason Code as defined by 802.11 standards
1.3.6.1.4.1.14179.2.1.4.1.10INTEGER {unspecified(1), previousAuthNotValid(2), deauthenticationLeaving(3), disassociationDueToInactivity(4), disassociationAPBusy(5), class2FrameFromNonAuthStation(6), class2FrameFromNonAssStation(7), disassociationStaHasLeft(8), staReqAssociationWithoutAuth(9), invalidInformationElement(40), groupCipherInvalid(41), unicastCipherInvalid(42), akmpInvalid(43), unsupportedRsnVersion(44), invalidRsnIeCapabilities(45), cipherSuiteRejected(46), missingReasonCode(99), maxAssociatedClientsReached(101), unSpecifieQosFailure(200), qosPolicyMismatch(201), inSufficientBandwidth(202), inValidQosParams(203), noOperation(1000), none(1001), deauthOrDisassocReq(1002), sessionAwareModuleInitiated(1003), l3authFail(1004), apInitiatedDelete(1005), bssidDown(1006), capwapDown(1007), connectTimeout(1008), mabFailed(1009), datapathFailure(1010), wlanChange(1011), vlanChange(1012), adminReset(1013), qosFailure(1014), keyExchangeTimeout(1015), groupKeyUpdateTimeout(1016), maxSaqueries(1017), restartPurge(1018), clientBlacklist(1019), interWncdRoamSuccess(1020), interWncdRoamFailure(1021), interCtrlRoamSuccess(1022), mobilityFailure(1023), sessionTimeout(1024), idleTimeout(1025), userRequest(1026), nasError(1027), serviceUnavailable(1028), mbssidDown(1029), mmTunnelDown(1030), dot11vSmartRoamFailed(1031), dot11vTimerTimeout(1032), dot11vAssocFailed(1033), ftAuthResponse(1034), saeAuthFailure(1035), dot11UnspecifiedFailure(1036), dot11FailureIgnoreReq(1037), dot11CcxQosAddtsNoBandwidth(1038), dot11CapsUnsupported(1039), dot11AssocDeniedUnspec(1040), dot11MaxSta(1041), dot11DeniedRates(1042), dot11PoorChannelConditions(1043), dot11InvalidQosParameter(1044), dot11InvalidIe(1045), dot11GroupCipherInvalid(1046), dot11UnicastCipherInvalid(1047), dot11AkmpInvalid(1048), dot11UnsupportedRsnVersion(1049), dot11InvalidRsnIeCapabilities(1050), dot11CipherSuiteRejected(1051), dot11DeniedHtCapabiliies(1052), dot11InvalidFtActionFrameCount(1053), dot11InvalidPmkid(1054), dot11InvalidMdie(1055), dot11InvalidFtie(1056), dot11CcxQosPolicy(1057), dot11CcxInsufficientBandwidth(1058), dot11CcxInvalidQosParameter(1059), dot11CcxNonOptimalAssociationChoice(1060), wiredIappDisassoc(1061), wiredWgbChange(1062), wiredVlanChange(1063), wiredWgbDelete(1064), avcReanchoring(1065), wgbClientDirectAssoc(1066), apUpgrade(1067), clientDhcpFailure(1068), clientEapTimeoutFailure(1069), client8021xFailure(1070), clientDeviceIdle(1071), clientCaptivePortalSecurityFailure(1072), clientDecryptionFailure(1073), clientInterfaceDisabled(1074), clientUserTriggeredDisassoc(1075), clientMiscReason(1076), clientUnknownReason(1077), clientPeerTriggered(1078), clientBeaconLoss(1079), clientEapIdTimeout(1080), clientDot1xTimeout(1081), keyMgmtInvalidFrame(1082), keyMgmtInstallBit(1083), keyMgmtErrorBit(1084), keyMgmtAckBit(1085), keyMgmtInvalidKey(1086), keyMgmtSecureBit(1087), keyMgmtKeyDescVer(1088), keyMgmtWrongReplayCounter(1089), keyMgmtNoMicBit(1090), keyMgmtMicValidation(1091), keyMgmtPtkComputation(1092), clientCredentialFailure(1093), lostCarrier(1094), reauthFailure(1095), portAdminDisabled(1096), supplicantRestart(1097), ipDownNoIp(1098), anchorThrottled(1099), anchorNoMemory(1100), anchorInvalidMbssid(1101), anchorCreateReqFail(1102), dbPopulateFail(1103), danglingCleanupTimer(1104), excludeConfig(1105), excludeAssocFail(1106), excludeDot11AuthFail(1107), excludeDot1xTimeout(1108), excludeDot1xAuthFail(1109), excludeWebAuthFail(1110), excludePolicyBindFail(1111), excludeIpTheft(1112), excludeMacTheft(1113), excludeMacAndIpTheft(1114), excludeQosPolicyFail(1115), excludeQosPolicyApSendFail(1116), excludeQosPolicyApBindFail(1117), excludeQosPolicyApUnbindFail(1118), excludeStaticIpAnchorFail(1119), excludeVlanFail(1120), excludeAclFail(1121), excludePuntAclFail(1122), excludeAccountingFail(1123), excludeCtsFail(1124), excludeFqdnNoDefFail(1125), excludeFqdnPostauthMismatchFail(1126), excludeFqdnPreauthMismatchFail(1127), excludeFqdnZeroGidFail(1128), excludeMiscFail(1129), excludeReauthFailure(1130), excludeWrongPsk(1131), excludePolicyFailure(1132), mnIdleTimeout(1133), mnClientAclMismatch(1134), mnApAuthStop(1135), mnAssocExpiredAtAp(1136), mn4wayHandshakeFailed(1137), mnDhcpTimeout(1138), mnReassocTimeout(1139), mnSaQueryTimeout(1140), mnIntraApRoam(1141), mnChannelSwitchAtAp(1142), mnDelBadAid(1143), mnDelRequest(1144), mnDelIntfReset(1145), mnDelAllOnSlot(1146), mnDelReaperRadio(1147), mnDelSlotDisable(1148), mnDelMicFail(1149), mnDelVlanDel(1150), mnDelChannelChange(1151), mnDelStopReassoc(1152), mnDelPakMaxRetry(1153), mnDelTxDeauth(1154), mnDelSensorStaTimeout(1155), mnDelAgeTimeout(1156), mnDelTxFailThold(1157), mnDelUplinkRcvTimeout(1158), mnDelSnsrScanNxtRadio(1159), mnDelSnsrScanOtherBssid(1160), aaaServerUnavailable(1161), aaaNotReady(1162), noDot1xAuthConfig(1163), abortReceived(1164), assocConnectTimeout(1165), macauthConnectTimeout(1166), l2authConnectTimeout(1167), l3authConnectTimeout(1168), mobilityConnectTimeout(1169), sIpAnchorConnectTimeout(1170), smSessionConnectTimeout(1171), iplearnConnectTimeout(1172), nackIfidExists(1173), radioDown(1174), fabricReject(1175), guestLanInvalidMbssid(1176), guestLanNoMemory(1177), guestLanCreateReqFail(1178), tunnelEogreReset(1179), tunnelEogreJoinFail(1180), tunnelEogreReconciliation(1181), wiredIdleTimeout(1182), ipUpdateTimeout(1183), remoteMobilityDelete(1184), saeAuthInAssociatedState(1185), nackIfidMismatch(1186), tunnelEogreInvalidVlan(1187), tunnelEogreEmptyDomain(1188), tunnelEogreInvalidDomain(1189), tunnelEogreDomainShut(1190), tunnelEogreInvalidGw(1191), tunnelEogreGwDown(1192), tunnelEogreFlexNoActiveGw(1193), tunnelEogreRuleMatch(1194), tunnelEogreAaaOverride(1195), tunnelEogreMspayload(1196), tunnelEogreHandoffError(1197), invalidPmkLen(1198), l3VlanOverrideConnectTimeout(1199), userTriggeredUnspecified(1200), userTriggeredPwroffWifioff(1201), userTriggeredConnectToAnotherSsid(1202), userTriggeredRemoveSsid(1203), userTriggeredAirplaneMode(1204), l2connectionUnspecified(1205), l2connectionAssociation(1206), fourWayHandshakeUnspecified(1207), keyM1Failure(1208), keyM3Failure(1209), m3M4KeyXchngTimeout(1210), dhcpFailUnspecified(1211), dhcpFailTimeout(1212), dhcpFailTimeoutAfterRoaming(1213), dhcpFailLeaseExpired(1214), dhcpFailNakInRenew(1215), dhcpFailRenewLeaseWrongIp(1216), dhcpFailInternalError(1217), eapFailUnspecified(1218), eapFailCodeFail(1219), eapFailInfoNotEntered(1220), eapFailMschapError(1221), eapFailSimAuthFail(1222), eapFailTimeout(1223), eapFailTlsCertError(1224), noInternetUnspecified(1225), noInternetDns(1226), noInternetArp(1227), exclusionPolicyTemplateFail(1228), mnDelAuthExpired(1229), mnDelDisassoc(1230), mnDelTxDisassoc(1231), fastroamMobilityFailure(1232), roamAcrossPolicyProfileDeny(1233), dot11AidAllocConflictReq(1234), zoneChange(1235), wlanIdAttrMismatch(1236), easypskAAAUnknown(1237), easypskUnspecified(1238), easypskPskMismatch(1239), easypskRadiusBusy(1240), easypskLimitReached(1241), easypskBadFrame(1242), easypskMissingParameter(1243), supplicantNameFail(1244), userNameFail(1245), serviceSetIdFail(1246), anchorVlanIdFail(1247), pskFail(1248), pskModeFail(1249), interimIntervalFail(1250), randomMac(1251), mnapiplearntimeout(1252), mnapbyflexgroupchange(1253), mnapeapollogoff(1254), mnapeapreqtimeout(1255), mnap4wayhandshakefailed(1256), mnapmicvalidation(1257), mnapwrongreplaycounter(1258), mnaptunneldown(1259), mnapinteraproam(1260), mnapunknownclient(1261), mnapreauthtimeout(1262), mnapcontidletimeout(1263), mnaprldpcleanup(1264), mnapintraswitchroam(1265), mnappemcleanup(1266), mnaprlancentralswitch(1267), mnaprlandpaddfail(1268), mnaprlandelete(1269), mnaprlaninactivetimeout(1270), mnaprlanmabfailure(1271), mnapclsmnomemory(1272), mnapclsmbssidmismatch(1273), mnapclsmdeletenoacl(1274), mnapclsmdeletenoparentwgb(1275), mnapclsmkeyplumbfail(1276), mnapclsmmeshkeyplumbfail(1277), mnapclsmdpaddfail(1278), mnapclsmauthrespreject(1279), mnapclsmauthrespsendfail(1280), mnapclsmassocrespsendfail(1281), mnapclsmassocrespwithfailurestatus(1282), mnapclsmwebauthtimerexpired(1283), mnapclsmdot1xtimerexpired(1284), mnapclsmdeauthdisassocsendfail(1285), mnapdrivereventclass3recv(1286), mnapdrivereventpspwhenunauth(1287), mnapdrivereventioctlerror(1288), mnapflexftfailure(1289), mnapclsmdriveraddfail(1290), mnapdriverclientnotfound(1291), mnapdrivermgmtpktallocfail(1292), mnapdriverinvalidcipher(1293), mnapdriverinvalidaid(1294), mnapdriverinvalidkey(1295), mnapdriverfwkeysetfailed(1296), mnapdriverinvalidhtvhtrates(1297), mnapdriverinvalidlegacyrates(1298), mnapdrivernooverlaplegacyrates(1299), mnapdrivermaxvhtstreams(1300), mnapdriveraidinuse(1301), mnapdriverassoctoomany(1302), mnapdrivercipherattachfail(1303), mnapdriveralgorithmmismatch(1304), mnapdriverinvalidkeylength(1305), mnapdriverinvalidkeyindex(1306), mnapdriverassocscbnotauthenticated(1307), mnapdriverstadbinitfailed(1308), mnapdriveraddingentryfailed(1309), mnapdriveraddingentryinfirmwarefailed(1310), mnapreasonapmax(1311), linklocalbridgevlanfail(1312), maxstaonap(1313), maxstaonvap(1314), maxstaonbssid(1315), maxstaonradio(1316), mnapmaxstaonap(1317), mnapmaxstaonbssid(1318), mnapmaxstaonradio(1319), pmkTimeoutOnSTA(1320), excessarprate(1321), excessndprate(1322), vrfvlanMismatch(1323), dpathencodefailed(1324)}read-onlycurrent
bsnMobileStationMobilityStatus
OBJECT-TYPE
Mobility Role of the Mobile Station.
1.3.6.1.4.1.14179.2.1.4.1.11INTEGER {unassociated(0), local(1), anchor(2), foreign(3), handoff(4), unknown(5), exportanchor(6), exportforeign(7)}read-onlycurrent
bsnMobileStationAnchorAddress
OBJECT-TYPE
If the Mobility Status of the Mobile Station is Anchor then it will have Peer Ip Address and will have Anchor IP if the Role is Foreign
1.3.6.1.4.1.14179.2.1.4.1.12IpAddressread-onlycurrent
bsnMobileStationCFPollable
OBJECT-TYPE
When this attribute is true, it shall indicate that the Mobile Station is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the Mobile Station is not able to respond to a CF-Poll with a data frame within a SIFS time.
1.3.6.1.4.1.14179.2.1.4.1.13INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnMobileStationCFPollRequest
OBJECT-TYPE
Specifies whether CFP is requested by Mobile Station or not
1.3.6.1.4.1.14179.2.1.4.1.14INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnMobileStationChannelAgilityEnabled
OBJECT-TYPE
This attribute indicates that the PHY channel agility functionality is enabled.
1.3.6.1.4.1.14179.2.1.4.1.15INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnMobileStationPBCCOptionImplemented
OBJECT-TYPE
This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute shall be false.
1.3.6.1.4.1.14179.2.1.4.1.16INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnMobileStationShortPreambleOptionImplemented
OBJECT-TYPE
This attribute, when true, shall indicate that the short preamble option as defined in subclause 18.2.2.2 is implemented. The default value of this attribute shall be false.
1.3.6.1.4.1.14179.2.1.4.1.17INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnMobileStationSessionTimeout
OBJECT-TYPE
Session Timeout of Mobile station
1.3.6.1.4.1.14179.2.1.4.1.18Unsigned32read-onlycurrent
bsnMobileStationAuthenticationAlgorithm
OBJECT-TYPE
Authentication Algorithm of Mobile Station
1.3.6.1.4.1.14179.2.1.4.1.19INTEGER {openSystem(0), sharedKey(1), unknown(2), openAndEap(128)}read-onlycurrent
bsnMobileStationWepState
OBJECT-TYPE
WEP State of Mobile Station
1.3.6.1.4.1.14179.2.1.4.1.20INTEGER {enable(1), disable(2)}read-onlycurrent
bsnMobileStationPortNumber
OBJECT-TYPE
The Port Number of this Airespace Switch on which the traffic of the Mobile Station is coming through.
1.3.6.1.4.1.14179.2.1.4.1.21Unsigned32read-onlycurrent
bsnMobileStationDeleteAction
OBJECT-TYPE
Action to Deauthenticate the Mobile Station. Set the State to delete.
1.3.6.1.4.1.14179.2.1.4.1.22INTEGER {default(0), delete(1)}read-writecurrent
bsnMobileStationPolicyManagerState
OBJECT-TYPE
Policy Manager State of the mobile station.
1.3.6.1.4.1.14179.2.1.4.1.23DisplayStringread-onlycurrent
bsnMobileStationSecurityPolicyStatus
OBJECT-TYPE
When this attribute has value completed, it shall indicate that the Mobile Station has completed the security policy checks. Otherwise the checks are yet to be completed.
1.3.6.1.4.1.14179.2.1.4.1.24INTEGER {completed(0), notcompleted(1)}read-onlycurrent
bsnMobileStationProtocol
OBJECT-TYPE
The 802.11 protocol type of the client. The protocol is mobile when this client detail is seen on the anchor i.e it's mobility status is anchor.
1.3.6.1.4.1.14179.2.1.4.1.25INTEGER {dot11a(1), dot11b(2), dot11g(3), unknown(4), mobile(5), dot11n24(6), dot11n5(7), ethernet(8), dot3(9), dot11ac(10), dot11ax5(11), dot11ax24(12), dot11ax6(13)}read-onlycurrent
bsnMobileStationMirrorMode
OBJECT-TYPE
If enabled, then mirroring for this client will be statically configured irrespective of the AP and the port this client is on.
1.3.6.1.4.1.14179.2.1.4.1.26INTEGER {disable(0), enable(1)}read-writecurrent
bsnMobileStationInterface
OBJECT-TYPE
Name of the Interface of the mobile client to the switch.
1.3.6.1.4.1.14179.2.1.4.1.27DisplayString (SIZE(0..32))read-onlycurrent
bsnMobileStationApMode
OBJECT-TYPE
Mode of the AP to which the Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.4.1.28INTEGER {local(0), monitor(1), remote(2), roguedetector(3)}read-onlycurrent
bsnMobileStationVlanId
OBJECT-TYPE
Vlan ID of the Interface to which the client is associated.
1.3.6.1.4.1.14179.2.1.4.1.29Integer32 (0..4096)read-onlycurrent
bsnMobileStationPolicyType
OBJECT-TYPE
Mode of the AP to which the Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.4.1.30INTEGER {dot1x(0), wpa1(1), wpa2(2), wpa2vff(3), notavailable(4), unknown(5), wpa2or3(6), wpaOsen(7), wpaOsenWithinRsn(8)}read-onlycurrent
bsnMobileStationEncryptionCypher
OBJECT-TYPE
Mode of the AP to which the Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.4.1.31INTEGER {ccmpAes(0), tkipMic(1), wep40(2), wep104(3), wep128(4), none(5), tkipWep40(6), tkipWep104(7), gcmp128(8), gcmp256(9), ccmp256(10), notavailable(11), unknown(12)}read-onlycurrent
bsnMobileStationEapType
OBJECT-TYPE
Mode of the AP to which the Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.4.1.32INTEGER {eapTls(0), ttls(1), peap(2), leap(3), speke(4), eapFast(5), notavailable(6), unknown(7)}read-onlycurrent
bsnMobileStationCcxVersion
OBJECT-TYPE
Represents the Cisco Compatible Extensions (CCX) Version the client is using for communication with the AP.
1.3.6.1.4.1.14179.2.1.4.1.33INTEGER {notSupported(0), ccxv1(1), ccxv2(2), ccxv3(3), ccxv4(4), ccxv5(5), ccxv6(6)}read-onlycurrent
bsnMobileStationE2eVersion
OBJECT-TYPE
Represents the End-2-End Version the client is using for communication with the AP.
1.3.6.1.4.1.14179.2.1.4.1.34INTEGER {notSupported(0), e2ev1(1), e2ev2(2)}read-onlycurrent
bsnMobileStationStatusCode
OBJECT-TYPE
Status Code of the Mobile Station
1.3.6.1.4.1.14179.2.1.4.1.42INTEGER (0..65535)read-onlycurrent
bsnMobileStationAAAOverridePassphrase
OBJECT-TYPE
Flag to check wheather AAA override passphrase is enabled for a MAB+PSK client or not.
1.3.6.1.4.1.14179.2.1.4.1.43TruthValueread-onlycurrent
bsnMobileStationPerRadioPerVapTable
OBJECT-TYPE
Mobile Station Per Radio Per VAP(WLAN) Table. This table lists all Mobile Stations on a particular Airespace AP Interface for a particular ESS(Wlan). It only lists MAC Addresses. Further details for a Mobile Station can be found from bsnMobileStationTable once the MAC Address is knonwn. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.5not-accessiblecurrent
bsnMobileStationPerRadioPerVapEntry
OBJECT-TYPE
An entry in MobileStationPerRadioPerVapTable.
1.3.6.1.4.1.14179.2.1.5.1not-accessiblecurrent
bsnMobileStationPerRadioPerVapIndex
OBJECT-TYPE
The index of Mobile Station. The index starts from 1 and goes upto the total number of Mobile Stations on Airespace Radio Interface for a specific ESS (Wlan).
1.3.6.1.4.1.14179.2.1.5.1.1Integer32read-onlycurrent
bsnMobileStationMacAddr
OBJECT-TYPE
The MAC Address of Mobile Station.
1.3.6.1.4.1.14179.2.1.5.1.20MacAddressread-onlycurrent
bsnMobileStationStatsTable
OBJECT-TYPE
Mobile Station Statistics Table. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.6not-accessiblecurrent
bsnMobileStationStatsEntry
OBJECT-TYPE
An entry in bsnMobileStationStatsTable.
1.3.6.1.4.1.14179.2.1.6.1not-accessiblecurrent
bsnMobileStationRSSI
OBJECT-TYPE
Average packet RSSI for the Mobile Station.
1.3.6.1.4.1.14179.2.1.6.1.1Integer32read-onlycurrent
bsnMobileStationBytesReceived
OBJECT-TYPE
Bytes received from Mobile Station
1.3.6.1.4.1.14179.2.1.6.1.2Counter64read-onlycurrent
bsnMobileStationBytesSent
OBJECT-TYPE
Bytes sent to Mobile Station
1.3.6.1.4.1.14179.2.1.6.1.3Counter64read-onlycurrent
bsnMobileStationPolicyErrors
OBJECT-TYPE
Number of Policy Errors for Mobile Station
1.3.6.1.4.1.14179.2.1.6.1.4Counter64read-onlycurrent
bsnMobileStationPacketsReceived
OBJECT-TYPE
Packets received from Mobile Station
1.3.6.1.4.1.14179.2.1.6.1.5Counter64read-onlycurrent
bsnMobileStationPacketsSent
OBJECT-TYPE
Packets sent to Mobile Station
1.3.6.1.4.1.14179.2.1.6.1.6Counter64read-onlycurrent
bsnMobileStationSnr
OBJECT-TYPE
Signal to noise Ratio of the Mobile Station.
1.3.6.1.4.1.14179.2.1.6.1.26Integer32read-onlycurrent
bsnRogueAPTable
OBJECT-TYPE
Rogue Table. This table lists all the Rogue APs detected by Airespace APs.
1.3.6.1.4.1.14179.2.1.7not-accessiblecurrent
bsnRogueAPEntry
OBJECT-TYPE
An Entry in bsnRogueAPTable.
1.3.6.1.4.1.14179.2.1.7.1not-accessiblecurrent
bsnRogueAPDot11MacAddress
OBJECT-TYPE
MAC Address of Rogue Station.
1.3.6.1.4.1.14179.2.1.7.1.1MacAddressread-createcurrent
bsnRogueAPTotalDetectingAPs
OBJECT-TYPE
Total number of Airespace APs that detected this rogue.
1.3.6.1.4.1.14179.2.1.7.1.2Integer32read-onlycurrent
bsnRogueAPFirstReported
OBJECT-TYPE
Time Stamp when this Rogue was First Detected.
1.3.6.1.4.1.14179.2.1.7.1.3DisplayStringread-onlycurrent
bsnRogueAPLastReported
OBJECT-TYPE
Time Stamp when this Rogue was Last Detected.
1.3.6.1.4.1.14179.2.1.7.1.4DisplayStringread-onlycurrent
bsnRogueAPContainmentLevel
OBJECT-TYPE
If the state of the rogue is contained, this specifies the level of containment. Higher the level, more the number of detecting APs that are used to contain it. The value must be between 1 to 4 for 'contained' state.
1.3.6.1.4.1.14179.2.1.7.1.5INTEGER {unassigned(0), level1(1), level2(2), level3(3), level4(4)}read-createcurrent
bsnRogueAPType
OBJECT-TYPE
This attribute specifies if the Rogue is of ad-hoc type or is an AP.
1.3.6.1.4.1.14179.2.1.7.1.6INTEGER {ap(0), adhoc(1)}read-onlycurrent
bsnRogueAPOnNetwork
OBJECT-TYPE
This attribute specifies if the Rogue is on Wired Network or not.
1.3.6.1.4.1.14179.2.1.7.1.7INTEGER {no(0), yes(1)}read-onlycurrent
bsnRogueAPTotalClients
OBJECT-TYPE
Total number of Clients detected on this rogue.
1.3.6.1.4.1.14179.2.1.7.1.8Integer32read-onlycurrent
bsnRogueAPRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.1.7.1.9RowStatusread-createcurrent
bsnRogueAPMaxDetectedRSSI
OBJECT-TYPE
This is the max RSSI value of all the detctecting APs, which have detected this rogue.
1.3.6.1.4.1.14179.2.1.7.1.10Integer32read-onlycurrent
bsnRogueAPSSID
OBJECT-TYPE
This is the SSID of the rogue detected by Access Point, which has max RSSI value of all the detectecting APs of this rogue.
1.3.6.1.4.1.14179.2.1.7.1.11DisplayString (SIZE(1..32))read-onlycurrent
bsnRogueAPDetectingAPRadioType
OBJECT-TYPE
Radio type of detecting APs. If the radio type is detected by dot11bg radio or dot11a radio or both.
1.3.6.1.4.1.14179.2.1.7.1.12Bits {dot11b(0), dot11a(1), dot11g(2), dot11n24(3), dot11n5(4), dot11abgn(5), dot11ac(6), dot11ax24(7), dot11ax5(8), dot11ax6(9)}read-onlycurrent
bsnRogueAPDetectingAPMacAddress
OBJECT-TYPE
MAC Address of of detecting AP which received max RSSI
1.3.6.1.4.1.14179.2.1.7.1.13MacAddressread-onlycurrent
bsnRogueAPMaxRssiRadioType
OBJECT-TYPE
The radio type of detecting AP which received max RSSI value.
1.3.6.1.4.1.14179.2.1.7.1.14INTEGER {dot11b(1), dot11a(2), dot11abgn(3), uwb(4), dot11g(5), dot11n24(6), dot11n5(7), dot11ac(8), dot11ax24(9), dot11ax5(10), dot11ax6(11)}read-onlycurrent
bsnRogueAPState
OBJECT-TYPE
This attribute is use to specify the state in which the Rogue AP is user can set the Rogue AP in alert, known or acknowledge state. Alert state means Rogue AP can be a potential threat. Trap will be sent out to trap recipients. Known state means its just internal AP which is not on the same Switch. Acknowledge state means an external AP whose existence is acceptable and not a threat (probably some other company's AP). Contained means containement is initiated and ongoing. Threat is usually the state when the rogue is found on wired network. known(4), knownContained(9) and trustedMissing(10) will appear in known rogue list. known rogues can be pre provisioned and known rogues state can be changed to alert(2)
1.3.6.1.4.1.14179.2.1.7.1.24INTEGER {initializing(0), pending(1), alert(2), detectedLrad(3), known(4), acknowledge(5), contained(6), threat(7), containedPending(8), knownContained(9), trustedMissing(10)}read-createcurrent
bsnRogueAPClassType
OBJECT-TYPE
The AP class type of the client detected.
1.3.6.1.4.1.14179.2.1.7.1.25INTEGER {pending(0), friendly(1), malicious(2), unclassified(3)}read-createcurrent
bsnRogueAPChannel
OBJECT-TYPE
This is the channel number of the last detecting APs, which has detected this rogue. Use in conjuction with bsnRogueAPMaxRssiRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6GHz band.
1.3.6.1.4.1.14179.2.1.7.1.26Integer32read-onlycurrent
bsnRogueAPDetectingAPName
OBJECT-TYPE
AP name of the detecting AP which received max RSSI
1.3.6.1.4.1.14179.2.1.7.1.27OCTET STRING (SIZE(0..32))read-createcurrent
bsnRogueAPAirespaceAPTable
OBJECT-TYPE
Rogue Station Table. This table lists all the Airespace AP Interfaces that detected a particular Rogue.
1.3.6.1.4.1.14179.2.1.8not-accessiblecurrent
bsnRogueAPAirespaceAPEntry
OBJECT-TYPE
An entry in bsnRogueAPAirespaceAPEntry.
1.3.6.1.4.1.14179.2.1.8.1not-accessiblecurrent
bsnRogueAPAirespaceAPMacAddress
OBJECT-TYPE
MAC Address of Airespace AP Interface that Detected the Rogue.
1.3.6.1.4.1.14179.2.1.8.1.1MacAddressread-onlycurrent
bsnRogueAPAirespaceAPSlotId
OBJECT-TYPE
The slot and band index of the Airespace AP Interface that detected the Rogue. Use bsnRogueAPPhysicalAPSlot for Slot ID of the Detecting AP Interface.
1.3.6.1.4.1.14179.2.1.8.1.2Unsigned32 (0..2)read-onlycurrent
bsnRogueAPRadioType
OBJECT-TYPE
The Airespace AP Interface type that detected the Rogue.
1.3.6.1.4.1.14179.2.1.8.1.3INTEGER {dot11b(1), dot11a(2), unknown(3), uwb(4), dot11g(5), dot11n24(6), dot11n5(7), dot11ac(9), dot11ax24(10), dot11ax5(11), dot11ax6(12)}read-onlycurrent
bsnRogueAPAirespaceAPName
OBJECT-TYPE
Name of Airespace AP Interface that detected the Rogue.
1.3.6.1.4.1.14179.2.1.8.1.4DisplayStringread-onlycurrent
bsnRogueAPChannelNumber
OBJECT-TYPE
The advertised Channel Number of the Airespace AP Interface picked up from the Rogue. Use in conjuction with bsnRogueAPRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6GHz band.
1.3.6.1.4.1.14179.2.1.8.1.5Integer32read-onlycurrent
bsnRogueAPSsid
OBJECT-TYPE
The SSID Advertised by Rogue Station.
1.3.6.1.4.1.14179.2.1.8.1.6DisplayStringread-onlycurrent
bsnRogueAPAirespaceAPRSSI
OBJECT-TYPE
Rogue RSSI as seen by Airespace AP Interface.
1.3.6.1.4.1.14179.2.1.8.1.7Integer32read-onlycurrent
bsnRogueAPContainmentMode
OBJECT-TYPE
If the rogue is in 'contained' state, this attribute shows the containment mode used by the AP.
1.3.6.1.4.1.14179.2.1.8.1.8INTEGER {invalid(0), deauthBroadcast(1), cfp(2), max(3), unknown(99)}read-onlycurrent
bsnRogueAPContainmentChannelCount
OBJECT-TYPE
The number of channels used for rogue containment.
1.3.6.1.4.1.14179.2.1.8.1.9Unsigned32read-onlycurrent
bsnRogueAPContainmentChannels
OBJECT-TYPE
This is the comma separated string of channels used for rogue containment.
1.3.6.1.4.1.14179.2.1.8.1.10DisplayStringread-onlycurrent
bsnRogueAPAirespaceAPLastHeard
OBJECT-TYPE
No of seconds ago when this Rogue was last heard by this AP.
1.3.6.1.4.1.14179.2.1.8.1.11Counter32read-onlycurrent
bsnRogueAPAirespaceAPWepMode
OBJECT-TYPE
The WEP mode on this detecting AP.
1.3.6.1.4.1.14179.2.1.8.1.12INTEGER {disabled(0), enabled(1)}read-onlycurrent
bsnRogueAPAirespaceAPPreamble
OBJECT-TYPE
The Preamble on this detecting AP.
1.3.6.1.4.1.14179.2.1.8.1.13INTEGER {long(0), short(1), notSupported(2)}read-onlycurrent
bsnRogueAPAirespaceAPWpaMode
OBJECT-TYPE
The WPA mode on this detecting AP.
1.3.6.1.4.1.14179.2.1.8.1.14INTEGER {disabled(0), enabled(1)}read-onlycurrent
bsnRogueAPAirespaceAPSNR
OBJECT-TYPE
SNR seen by Airespace AP Interface from Rogue
1.3.6.1.4.1.14179.2.1.8.1.27Integer32read-onlycurrent
bsnRogueAPChannelWidth
OBJECT-TYPE
This object represents the channel width of the rogue.
1.3.6.1.4.1.14179.2.1.8.1.28INTEGER {five(1), ten(2), twenty(3), aboveforty(4), belowforty(5)}read-onlycurrent
bsnRogueAPPhysicalAPSlot
OBJECT-TYPE
Reporting AP Physical Slot ID
1.3.6.1.4.1.14179.2.1.8.1.29Integer32read-onlycurrent
bsnThirdPartyAPTable
OBJECT-TYPE
Third Party Access Point Table. An entry needs to be configured in this table for a third party access point that needs to be supported by the Switch. Note: A third party ESS (Wlan) with ID 17 should be created in bsnDot11EssTable before adding entries here. Please also note that ACS currently supports only Aironet 350, 1200 and Orinoco 2000 Access Points as third party APs.
1.3.6.1.4.1.14179.2.1.9not-accessibleobsolete
bsnThirdPartyAPEntry
OBJECT-TYPE
An entry in bsnThirdPartyAPTable.
1.3.6.1.4.1.14179.2.1.9.1not-accessibleobsolete
bsnThirdPartyAPMacAddress
OBJECT-TYPE
MAC Address of Third Party Access Point which is connected directly to this Airespace Switch.
1.3.6.1.4.1.14179.2.1.9.1.1MacAddressread-createobsolete
bsnThirdPartyAPInterface
OBJECT-TYPE
Interface(Port Number) to which the Third Party AP is connected.
1.3.6.1.4.1.14179.2.1.9.1.2Integer32read-createobsolete
bsnThirdPartyAPIpAddress
OBJECT-TYPE
Static IP address of the 3rd Party AP, 0.0.0.0 indicating x its using DHCP
1.3.6.1.4.1.14179.2.1.9.1.3IpAddressread-createobsolete
bsnThirdPartyAP802Dot1XRequired
OBJECT-TYPE
If 802.1X is required for the 3rd Party AP
1.3.6.1.4.1.14179.2.1.9.1.4INTEGER {disable(0), enable(1)}read-createobsolete
bsnThirdPartyAPMirrorMode
OBJECT-TYPE
If enabled, then data from all the foreign AP users and all the foreign APs on this APs port will be mirrored. These clients are dynamically added to the switch's mirrored MAC list.
1.3.6.1.4.1.14179.2.1.9.1.5INTEGER {disable(0), enable(1)}read-createobsolete
bsnThirdPartyAPRowStatus
OBJECT-TYPE
Row Status in the ThirdPartyAPEntry.
1.3.6.1.4.1.14179.2.1.9.1.24RowStatusread-createobsolete
bsnMobileStationByIpTable
OBJECT-TYPE
Mobile Station Table indexed by bsnMobileStationByIpAddress. NOTE: This is just to facilitate the search of mobile stations based on IP Address. Doing a get without the index doesn't return anything. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.10not-accessiblecurrent
bsnMobileStationByIpEntry
OBJECT-TYPE
An entry in bsnMobileStationByIpTable.
1.3.6.1.4.1.14179.2.1.10.1not-accessiblecurrent
bsnMobileStationByIpAddress
OBJECT-TYPE
IP Address of the Mobile Station
1.3.6.1.4.1.14179.2.1.10.1.1IpAddressread-onlycurrent
bsnMobileStationByIpMacAddress
OBJECT-TYPE
802.11 Mac Address of the Mobile Station.
1.3.6.1.4.1.14179.2.1.10.1.2MacAddressread-onlycurrent
bsnMobileStationRssiDataTable
OBJECT-TYPE
Mobile Station RSSI data Table indexed by bsnMobileStationMacAddress, bsnMobileStationRssiDataApMacAddress, bsnMobileStationRssiDataApIfSlotId. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.11not-accessiblecurrent
bsnMobileStationRssiDataEntry
OBJECT-TYPE
An entry in bsnMobileStationRssiDataTable.
1.3.6.1.4.1.14179.2.1.11.1not-accessiblecurrent
bsnMobileStationRssiDataApMacAddress
OBJECT-TYPE
802.11 Mac Address of the AP on which Mobile Station is associated.
1.3.6.1.4.1.14179.2.1.11.1.1MacAddressread-onlycurrent
bsnMobileStationRssiDataApIfSlotId
OBJECT-TYPE
SlotId of APIf on which mobile station is associated
1.3.6.1.4.1.14179.2.1.11.1.2Unsigned32 (0..15)read-onlycurrent
bsnMobileStationRssiDataApIfType
OBJECT-TYPE
The interface type of the radio that sensed the rssi data.
1.3.6.1.4.1.14179.2.1.11.1.3INTEGER {dot11bg(1), dot11a(2), unknown(3)}read-onlycurrent
bsnMobileStationRssiDataApName
OBJECT-TYPE
The Name of the AP that sensed the rssi data.
1.3.6.1.4.1.14179.2.1.11.1.4DisplayStringread-onlycurrent
bsnMobileStationRssiData
OBJECT-TYPE
RSSI seen by Airespace AP Interface for the Mobile Station
1.3.6.1.4.1.14179.2.1.11.1.5Integer32read-onlycurrent
bsnAPIfPhyAntennaIndex
OBJECT-TYPE
Antenna which recived the probe request from client. The antenna which reported the RSSI value for the client. For now value will be 0 to 1, in future it may change.
1.3.6.1.4.1.14179.2.1.11.1.6Unsigned32read-onlycurrent
bsnMobileStationRssiDataLastHeard
OBJECT-TYPE
No of seconds ago when this RSSI data was recorded.
1.3.6.1.4.1.14179.2.1.11.1.25Counter32read-onlycurrent
bsnWatchListClientTable
OBJECT-TYPE
Table of watch listed clients. When clients are added to this table by username or MAC address, ACS collects data for them to show trend reports. The switch generates Client Association and Client Authentication traps for the watch listed clients.The watch list feature can be enbaled or diabled by the bsnWatchListFeatureEnable flag on the switch.
1.3.6.1.4.1.14179.2.1.12not-accessibleobsolete
bsnWatchListClientEntry
OBJECT-TYPE
An entry in bsnWatchListClientTable.
1.3.6.1.4.1.14179.2.1.12.1not-accessibleobsolete
bsnWatchListClientKey
OBJECT-TYPE
MAC Address or User Name of Client that is to be added to the watch list.
1.3.6.1.4.1.14179.2.1.12.1.1OCTET STRING (SIZE(1..64))read-createobsolete
bsnWatchListClientType
OBJECT-TYPE
The type of the watch list client entry. The entry can be created by Client MAC Address or by Username.
1.3.6.1.4.1.14179.2.1.12.1.2INTEGER {byMac(1), byUserName(2)}read-createobsolete
bsnWatchListClientRowStatus
OBJECT-TYPE
A row status type for the bsnWatchListClientEntry
1.3.6.1.4.1.14179.2.1.12.1.20RowStatusread-createobsolete
bsnMobileStationByUsernameTable
OBJECT-TYPE
Mobile Station Table indexed by the Mobile Station Username and MAC Address. NOTE: This is just to facilitate the search of mobile stations based on User Name. Doing a get without the username doesn't return anything. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.13not-accessiblecurrent
bsnMobileStationByUsernameEntry
OBJECT-TYPE
An entry in bsnMobileStationByUsernameTable.
1.3.6.1.4.1.14179.2.1.13.1not-accessiblecurrent
bsnMobileStationByUserName
OBJECT-TYPE
Username of the Mobile Station
1.3.6.1.4.1.14179.2.1.13.1.1OCTET STRING (SIZE(1..64))read-onlycurrent
bsnMobileStationByUserMacAddress
OBJECT-TYPE
802.11 Mac Address of the Mobile Station.
1.3.6.1.4.1.14179.2.1.13.1.2MacAddressread-onlycurrent
bsnRogueClientTable
OBJECT-TYPE
Rogue Client Table. This table lists all the Rogue Clients detected by Airespace APs.
1.3.6.1.4.1.14179.2.1.14not-accessiblecurrent
bsnRogueClientEntry
OBJECT-TYPE
An Entry in bsnRogueClientTable.
1.3.6.1.4.1.14179.2.1.14.1not-accessiblecurrent
bsnRogueClientDot11MacAddress
OBJECT-TYPE
Mac Address of Rogue Station.
1.3.6.1.4.1.14179.2.1.14.1.1MacAddressnot-accessiblecurrent
bsnRogueClientTotalDetectingAPs
OBJECT-TYPE
Total number of Airespace APs that detected this rogue.
1.3.6.1.4.1.14179.2.1.14.1.2Integer32read-onlycurrent
bsnRogueClientFirstReported
OBJECT-TYPE
Time Stamp when this Rogue was First Detected.
1.3.6.1.4.1.14179.2.1.14.1.3DisplayStringread-onlycurrent
bsnRogueClientLastReported
OBJECT-TYPE
Time Stamp when this Rogue was Last Detected.
1.3.6.1.4.1.14179.2.1.14.1.4DisplayStringread-onlycurrent
bsnRogueClientBSSID
OBJECT-TYPE
This attribute specifies BSSID of the Rogue Client.
1.3.6.1.4.1.14179.2.1.14.1.5MacAddressread-onlycurrent
bsnRogueClientContainmentLevel
OBJECT-TYPE
If the state of the rogue is contained, this specifies the level of containment. Higher the level, more the number of detecting APs that are used to contain it. The value must be between 1 to 4 for 'contained' state.
1.3.6.1.4.1.14179.2.1.14.1.6INTEGER {unassigned(0), level1(1), level2(2), level3(3), level4(4)}read-writecurrent
bsnRogueClientLastHeard
OBJECT-TYPE
Number of seconds ago this rogue client was detected.
1.3.6.1.4.1.14179.2.1.14.1.7Integer32read-onlycurrent
bsnRogueClientState
OBJECT-TYPE
This attribute is use to specify the state in which the Rogue AP is. User can set the Rogue Client in alert,known or acknowledge state. Alert state means Rogue Client can be a potential i threat.Trap will be sent out to trap recipients. Known state means its just internal Client which is not on the same Switch. Acknowledge state means an external Client whose existence is acceptable and not a threat (probably some other company's AP). Contained means containement is initiated and ongoing
1.3.6.1.4.1.14179.2.1.14.1.24INTEGER {initializing(0), pending(1), alert(2), contained(6), threat(7), containedpending(8)}read-writecurrent
bsnRogueClientAirespaceAPTable
OBJECT-TYPE
Rogue Station Table. This table lists all the Airespace AP Interface that detected a particular Rogue.
1.3.6.1.4.1.14179.2.1.15not-accessiblecurrent
bsnRogueClientAirespaceAPEntry
OBJECT-TYPE
An entry in bsnRogueClientAirespaceAPEntry.
1.3.6.1.4.1.14179.2.1.15.1not-accessiblecurrent
bsnRogueClientAirespaceAPMacAddress
OBJECT-TYPE
Mac Address of Airespace AP Interface that Detected the Rogue.
1.3.6.1.4.1.14179.2.1.15.1.1MacAddressread-onlycurrent
bsnRogueClientAirespaceAPSlotId
OBJECT-TYPE
The slot and band index of the Airespace AP Interface that detected the Rogue. Use bsnRogueClientPhysicalAPSlot for Slot ID of the Detecting AP Interface.
1.3.6.1.4.1.14179.2.1.15.1.2Unsigned32 (0..2)read-onlycurrent
bsnRogueClientRadioType
OBJECT-TYPE
The advertised SSID that the Airespace AP Interface picked up from the Rogue.
1.3.6.1.4.1.14179.2.1.15.1.3INTEGER {dot11b(1), dot11a(2), unknown(3), dot11ax6(4)}read-onlycurrent
bsnRogueClientAirespaceAPName
OBJECT-TYPE
Name of Airespace AP Interface that detected the Rogue.
1.3.6.1.4.1.14179.2.1.15.1.4DisplayStringread-onlycurrent
bsnRogueClientChannelNumber
OBJECT-TYPE
The advertised Channel Number of that the Airespace AP Interface picked up from the Rogue. Use in conjuction with bsnRogueClientRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6GHz band.
1.3.6.1.4.1.14179.2.1.15.1.5Integer32read-onlycurrent
bsnRogueClientAirespaceAPRSSI
OBJECT-TYPE
RSSI seen by Airespace AP Interface from the Rogue
1.3.6.1.4.1.14179.2.1.15.1.7Integer32read-onlycurrent
bsnRogueClientAirespaceAPLastHeard
OBJECT-TYPE
No of seconds ago when this Rogue was last heard by this AP.
1.3.6.1.4.1.14179.2.1.15.1.11DisplayStringread-onlycurrent
bsnRogueClientAirespaceAPSNR
OBJECT-TYPE
SNR seen by Airespace AP Interface from Rogue
1.3.6.1.4.1.14179.2.1.15.1.27Integer32read-onlycurrent
bsnRogueClientPhysicalAPSlot
OBJECT-TYPE
Reporting AP Physical Slot ID
1.3.6.1.4.1.14179.2.1.15.1.28Integer32read-onlycurrent
bsnRogueClientPerRogueAPTable
OBJECT-TYPE
Rogue Clients for each rogue. This table lists all Rogue Clients on a particular Rogue.
1.3.6.1.4.1.14179.2.1.16not-accessiblecurrent
bsnRogueClientPerRogueAPEntry
OBJECT-TYPE
An entry in RogueClientPerRogueAPTable.
1.3.6.1.4.1.14179.2.1.16.1not-accessiblecurrent
bsnRogueAPDot11MacAddr
OBJECT-TYPE
The MAC Address of the Rogue AP.
1.3.6.1.4.1.14179.2.1.16.1.1MacAddressread-onlycurrent
bsnRogueClientDot11MacAddr
OBJECT-TYPE
MAC Address of the Rogue Client.
1.3.6.1.4.1.14179.2.1.16.1.20MacAddressread-onlycurrent
bsnDot11QosProfileTable
OBJECT-TYPE
QOS Profiles specified in bsnDot11EssTable can be customized in this table. This is a lookup table for auto created profiles
1.3.6.1.4.1.14179.2.1.17not-accessiblecurrent
bsnDot11QosProfileEntry
OBJECT-TYPE
An entry in bsnDot11QosProfileTable.
1.3.6.1.4.1.14179.2.1.17.1not-accessiblecurrent
bsnDot11QosProfileName
OBJECT-TYPE
QOS Profile Name. This will be one of bronze,gold, platinum,silver,uranium.
1.3.6.1.4.1.14179.2.1.17.1.1OCTET STRING (SIZE(1..32))read-onlycurrent
bsnDot11QosProfileDesc
OBJECT-TYPE
QOS Profile Description.
1.3.6.1.4.1.14179.2.1.17.1.2OCTET STRING (SIZE(1..64))read-writecurrent
bsnDot11QosAverageDataRate
OBJECT-TYPE
This is one of the per user bandwidth contracts(k). Specifies Average Data Rate per user. Value of 0 indicates the feature is disabled.
1.3.6.1.4.1.14179.2.1.17.1.3INTEGER (0..60000)read-writecurrent
bsnDot11QosBurstDataRate
OBJECT-TYPE
This is one of the per user bandwidth contracts(k). Specifies Average Burst Data Rate per user. Value of 0 indicates the feature is disabled.
1.3.6.1.4.1.14179.2.1.17.1.4INTEGER (0..60000)read-writecurrent
bsnDot11QosAvgRealTimeDataRate
OBJECT-TYPE
This is one of the per user bandwidth contracts(k). Specifies Average Real Time Data Rate per user. Value of 0 indicates the feature is disabled.
1.3.6.1.4.1.14179.2.1.17.1.5INTEGER (0..60000)read-writecurrent
bsnDot11QosBurstRealTimeDataRate
OBJECT-TYPE
This is one of the per user bandwidth contracts(k). Specifies Burst Real Time Data Rate per user. Value of 0 indicates the feature is disabled.
1.3.6.1.4.1.14179.2.1.17.1.6INTEGER (0..60000)read-writecurrent
bsnDot11QosMaxRFUsagePerAP
OBJECT-TYPE
This is one of the over the Air QOS parameter. Specifies maximum RF Usage per AP in percentage.
1.3.6.1.4.1.14179.2.1.17.1.7INTEGER (1..100)read-writecurrent
bsnDot11QosProfileQueueDepth
OBJECT-TYPE
This is one of the over the Air QOS parameter. Specifies Queue depth for the current profile.
1.3.6.1.4.1.14179.2.1.17.1.8INTEGER (10..255)read-writecurrent
bsnDot11WiredQosProtocol
OBJECT-TYPE
This is one of the over the Air QOS parameter. Specifies Queue depth for the current profile.
1.3.6.1.4.1.14179.2.1.17.1.9INTEGER {none(0), dot1p(1)}read-writecurrent
bsnDot11802Dot1PTag
OBJECT-TYPE
Specifies the type of wired QOS protocol for the current profile. Value of 0 indicates the feature is disabled.
1.3.6.1.4.1.14179.2.1.17.1.10INTEGER (0..7)read-writecurrent
bsnDot11ResetProfileToDefault
OBJECT-TYPE
Set this attribute to reset to restore the factory default value for the profile.
1.3.6.1.4.1.14179.2.1.17.1.40INTEGER {default(0), reset(1)}read-writecurrent
bsnTagTable
OBJECT-TYPE
RF ID Tag Table indexed by bsnTagDot11MacAddress.
1.3.6.1.4.1.14179.2.1.18not-accessiblecurrent
bsnTagEntry
OBJECT-TYPE
An entry in bsnTagTable.
1.3.6.1.4.1.14179.2.1.18.1not-accessiblecurrent
bsnTagDot11MacAddress
OBJECT-TYPE
802.11 MAC Address of the RF ID Tag.
1.3.6.1.4.1.14179.2.1.18.1.1MacAddressread-onlycurrent
bsnTagType
OBJECT-TYPE
Type of the RF ID Tag.
1.3.6.1.4.1.14179.2.1.18.1.2INTEGER {unknown(0), type1(2)}read-onlycurrent
bsnTagTimeInterval
OBJECT-TYPE
Time Interval after which the tag transmits data.
1.3.6.1.4.1.14179.2.1.18.1.3Unsigned32read-onlycurrent
bsnTagBatteryStatus
OBJECT-TYPE
Battery Status of the RF ID Tag.
1.3.6.1.4.1.14179.2.1.18.1.4INTEGER {unknown(0), low(1), normal(2), medium(3)}read-onlycurrent
bsnTagLastReported
OBJECT-TYPE
No of seconds ago when this tag was heard by any AP.
1.3.6.1.4.1.14179.2.1.18.1.23Unsigned32read-onlycurrent
bsnTagRssiDataTable
OBJECT-TYPE
RF ID Tag Detecting AP Table indexed by bsnTagDot11MacAddress, bsnTagRssiDataApMacAddress and bsnTagRssiDataApIfSlotId.
1.3.6.1.4.1.14179.2.1.19not-accessiblecurrent
bsnTagRssiDataEntry
OBJECT-TYPE
An entry in bsnTagRssiDataTable.
1.3.6.1.4.1.14179.2.1.19.1not-accessiblecurrent
bsnTagRssiDataApMacAddress
OBJECT-TYPE
802.11 MAC Address of the AP detecting the RF ID Tag.
1.3.6.1.4.1.14179.2.1.19.1.1MacAddressread-onlycurrent
bsnTagRssiDataApIfSlotId
OBJECT-TYPE
Slot Id of the radio on AP detecting the RF ID Tag.
1.3.6.1.4.1.14179.2.1.19.1.2Unsigned32 (0..5)read-onlycurrent
bsnTagRssiDataApIfType
OBJECT-TYPE
Interface Type of the radio on AP detecting the RF ID Tag.
1.3.6.1.4.1.14179.2.1.19.1.3INTEGER {dot11b(1), dot11a(2), uwb(4)}read-onlycurrent
bsnTagRssiDataApName
OBJECT-TYPE
Name of the AP detecting the RF ID Tag.
1.3.6.1.4.1.14179.2.1.19.1.4DisplayString (SIZE(0..32))read-onlycurrent
bsnTagRssiDataLastHeard
OBJECT-TYPE
No of seconds ago when this tag was heard by this detecting AP.
1.3.6.1.4.1.14179.2.1.19.1.5Counter32read-onlycurrent
bsnTagRssiData
OBJECT-TYPE
RSSI of the RF ID Tag as seen by the radio on this detecting AP.
1.3.6.1.4.1.14179.2.1.19.1.6Integer32read-onlycurrent
bsnTagRssiDataSnr
OBJECT-TYPE
SNR of the RF ID tag as seen by the radio on this detecting AP.
1.3.6.1.4.1.14179.2.1.19.1.26Integer32read-onlycurrent
bsnTagStatsTable
OBJECT-TYPE
RF ID Tag Statistics Table.
1.3.6.1.4.1.14179.2.1.20not-accessiblecurrent
bsnTagStatsEntry
OBJECT-TYPE
An entry in bsnTagStatsTable.
1.3.6.1.4.1.14179.2.1.20.1not-accessiblecurrent
bsnTagBytesReceived
OBJECT-TYPE
Bytes received from an RF ID Tag
1.3.6.1.4.1.14179.2.1.20.1.1Unsigned32read-onlycurrent
bsnTagPacketsReceived
OBJECT-TYPE
Packets received from an RF ID Tag
1.3.6.1.4.1.14179.2.1.20.1.20Unsigned32read-onlycurrent
bsnMobileStationExtStatsTable
OBJECT-TYPE
This table was supported only by indoor mesh AP -cisco 1000. As this AP is not supported after 4.2.x.x. This table has been marked obsolete. Mobile Station Extended Statistics Table. (Mobile Station is better referred to as Client in the current releases.)
1.3.6.1.4.1.14179.2.1.21not-accessibleobsolete
bsnMobileStationExtStatsEntry
OBJECT-TYPE
An entry in bsnMobileStationExtStatsTable.
1.3.6.1.4.1.14179.2.1.21.1not-accessibleobsolete
bsnMobileStationSampleTime
OBJECT-TYPE
Time stats were sampled as seconds since the epoch.
1.3.6.1.4.1.14179.2.1.21.1.1Integer32read-onlyobsolete
bsnMobileStationTxExcessiveRetries
OBJECT-TYPE
Tx packets dropped due to excessive retries.
1.3.6.1.4.1.14179.2.1.21.1.2Counter64read-onlyobsolete
bsnMobileStationTxRetries
OBJECT-TYPE
Tx packets retransmitted.
1.3.6.1.4.1.14179.2.1.21.1.3Counter64read-onlyobsolete
bsnMobileStationTxFiltered
OBJECT-TYPE
Tx packets dropped by the built-in Tx filter
1.3.6.1.4.1.14179.2.1.21.1.20Counter64read-onlyobsolete
bsnAP
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.2
bsnAPTable
OBJECT-TYPE
Table of Airespace APs managed by this Airespace Switch.
1.3.6.1.4.1.14179.2.2.1not-accessiblecurrent
bsnAPEntry
OBJECT-TYPE
An entry in the bsnAPTable.
1.3.6.1.4.1.14179.2.2.1.1not-accessiblecurrent
bsnAPDot3MacAddress
OBJECT-TYPE
The MAC address of an AP.
1.3.6.1.4.1.14179.2.2.1.1.1MacAddressread-onlycurrent
bsnAPNumOfSlots
OBJECT-TYPE
Number of Radio Interfaces on the Airespace AP. Currently maximum two interfaces are supported. One would be of type 802.11a and other of type 802.11b/g.
1.3.6.1.4.1.14179.2.2.1.1.2INTEGER (0..24)read-onlycurrent
bsnAPName
OBJECT-TYPE
Name assigned to this AP. If an AP is not configured its factory default name will be ap:<last three byte of MACAddress> eg. ap:af:12:be
1.3.6.1.4.1.14179.2.2.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
bsnAPLocation
OBJECT-TYPE
User specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure out for some one where the AP is located.
1.3.6.1.4.1.14179.2.2.1.1.4OCTET STRING (SIZE(0..80))read-writecurrent
bsnAPMonitorOnlyMode
OBJECT-TYPE
Monitor Only Mode Setting.
1.3.6.1.4.1.14179.2.2.1.1.5INTEGER {local(0), monitor(1), remote(2), roguedetector(3), sniffer(4), bridge(5), seConnect(6)}read-writecurrent
bsnAPOperationStatus
OBJECT-TYPE
Operation State of the AP. When AP associates with the Airespace Switch its state will be associated. When Airespace AP is disassociated from the Switch, its state will be disassociating. The state is downloading when the AP is downloading its firmware.
1.3.6.1.4.1.14179.2.2.1.1.6INTEGER {associated(1), disassociating(2), downloading(3)}read-onlycurrent
bsnAPSoftwareVersion
OBJECT-TYPE
Major Minor Software Version of AP
1.3.6.1.4.1.14179.2.2.1.1.8DisplayStringread-onlycurrent
bsnAPBootVersion
OBJECT-TYPE
Major Minor Boot Version of AP
1.3.6.1.4.1.14179.2.2.1.1.9DisplayStringread-onlycurrent
bsnAPPrimaryMwarName
OBJECT-TYPE
sysName of the Airespace Switch which is suppose to be the Primary MWAR(switch) of the AP with which AP should associate. This work when AP is not directly connected to Airespace Switch, it tries to find Primary Switch and associates with it. If this attribute is left empty or AP is not able to find the Airespace Switch with this name, then it will associate with Secondary Switch.
1.3.6.1.4.1.14179.2.2.1.1.10OCTET STRING (SIZE(0..31))read-writecurrent
bsnAPReset
OBJECT-TYPE
Set this attribute to reset the AP. When it comes up it will try to associate with the Primary Switch if that is set, else it will associate with the Master Switch. Reading this attribute will always return 0
1.3.6.1.4.1.14179.2.2.1.1.11INTEGER {default(0), reset(1)}read-writecurrent
bsnAPStatsTimer
OBJECT-TYPE
Configures the time interval in secs after which bsnAPDot11Counters Stats is sent from AP to Switch. If not configured this value is 0 which means never send the stats.
1.3.6.1.4.1.14179.2.2.1.1.12INTEGER (0..65535)read-writecurrent
bsnAPPortNumber
OBJECT-TYPE
Port on the Switch on which this APs traffic is coming through.
1.3.6.1.4.1.14179.2.2.1.1.13INTEGER (0..65535)read-onlydeprecated
bsnAPModel
OBJECT-TYPE
AP Model
1.3.6.1.4.1.14179.2.2.1.1.16DisplayStringread-onlycurrent
bsnAPSerialNumber
OBJECT-TYPE
AP Serial Number.
1.3.6.1.4.1.14179.2.2.1.1.17DisplayStringread-onlycurrent
bsnAPClearConfig
OBJECT-TYPE
Set this attribute to clear AP configuration and reset it to factory defaults. Reading this attribute will always return 0
1.3.6.1.4.1.14179.2.2.1.1.18INTEGER {default(0), clear(1)}read-writecurrent
bsnApIpAddress
OBJECT-TYPE
IP address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute will return 0 as value.
1.3.6.1.4.1.14179.2.2.1.1.19IpAddressread-writecurrent
bsnAPMirrorMode
OBJECT-TYPE
If enabled, then this AP's Client's Data is mirrored and this AP's clients are dynamically added to the switch's mirrored MAC list.
1.3.6.1.4.1.14179.2.2.1.1.20INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPRemoteModeSupport
OBJECT-TYPE
This specifies if the the Remote Mode is supported on this AP or not. If supported user can set bsnAPMonitorOnlyMode to remote. Otherwise not.
1.3.6.1.4.1.14179.2.2.1.1.21INTEGER {disable(0), enable(1)}read-onlycurrent
bsnAPType
OBJECT-TYPE
This is the model of the AP in enumeration. Ap models start with wap are called panda ap models.Ap models ended with different suffix have different functionalities. i : Ap with internal antenna e : Ap with external antena t : teleworker Aps p : stadium Aps w : wall mountable Aps agn : supports dot11(a),dot11(g),dot11(n) gn : supports dot11(g),dot11(n)
1.3.6.1.4.1.14179.2.2.1.1.22INTEGER {ap1000(1), ap1030(2), mimo(3), unknown(4), ap1100(5), ap1130(6), ap1240(7), ap1200(8), ap1310(9), ap1500(10), ap1250(11), ap1505(12), ap3201(13), ap1520(14), ap800(15), ap1140(16), ap800agn(17), ap3500i(18), ap3500e(19), ap1260(20), ap1040(21), ap1550(22), ap602i(23), ap3500p(24), ap802gn(25), ap802agn(26), ap3600i(27), ap3600e(28), ap2600i(29), ap2600e(30), ap802hagn(31), ap1600i(32), ap1600e(33), ap702e(34), ap702i(35), ap3600p(36), ap1530i(37), ap1530e(38), ap3700e(39), ap3700i(40), ap3700p(41), ap2700e(42), ap2700i(43), ap702w(44), wap2600i(45), wap2600e(46), wap1600i(47), wap1600e(48), wap702i(49), wap702e(50), ap1700i(51), ap1700e(52), ap1570e(53), ap1570i(54), ap1852e(55), ap1852i(56), ap1832i(57), ap752t(58), apmr24(59), ap3702(60), ap1802i(61), ap1810w(62), apoeap1810(63), ap3802e(64), ap3802i(65), ap3802p(66), ap3802q(67), ap2802e(68), ap2802i(69), ap2802q(70), ap1815w(71), apoeap1815(72), ap1815I(73), ap1562e(74), ap1562i(75), ap1562d(76), ap1562ps(77), ap1800I(78), ap1800S(79), ap1815M(80), ap1542D(81), ap1542I(82), ap1100ac(83), ap1101ac(84), ap1582e(85), ap1582i(86), ap1542E2(87), ap1542E4(88), ap9117I(89), ap9115AXI(90), ap9115AXE(91), ap1840I(92), ap9120AXI(93), ap9120AXE(94), ap9120AXP(95), iw6300HD(97), iw6300HA(98), iw6300HW(99), esw6300(100), ap9130AXI(101), ap9130AXE(102), ap9105AXI(106), ap9105AXW1(107), pwifiac2(110), ap9124AXI(112), ap9124AXD(113), ap9124AXE(114), ap9136I(115), wpwifi6(116), isr1101ax(129), cw9162I(130), cw9164I(131), cw9166I(132), iw9167eh(133), cw9166D1(134), iw9165DH(135), iw9167ih(136), cw9163E(137), cw9178I(138), iw9165E(139), cw9176I(140), cw9176D(141), cw9172I(142), cw9172H(143), cw9179F(144), cw9174I(145), cw9174E(146), cw9171I(147)}read-onlycurrent
bsnAPSecondaryMwarName
OBJECT-TYPE
sysName of the Airespace Switch which is suppose to be the Secondary MWAR(switch) of the AP with which AP should associate if Primary Switch(configured through bsnAPPrimaryMwarName) is not available. If primary and secondary switches are not available then AP will associate with the tertiary switch.
1.3.6.1.4.1.14179.2.2.1.1.23OCTET STRING (SIZE(0..31))read-writecurrent
bsnAPTertiaryMwarName
OBJECT-TYPE
sysName of the Airespace Switch which is suppose to be the Tertiary MWAR(switch) of the AP with which AP should associate. If primary,secondary and tertiary switch are not available then it will associate with Master Switch.
1.3.6.1.4.1.14179.2.2.1.1.24OCTET STRING (SIZE(0..31))read-writecurrent
bsnAPIsStaticIP
OBJECT-TYPE
This flag when disabled implies that AP will use DHCP to get the IP address. However, if it is enabled, then user should enter the IPAddress, Netmask and Gateway.
1.3.6.1.4.1.14179.2.2.1.1.25INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPNetmask
OBJECT-TYPE
The Netmask of the IP address of the AP.
1.3.6.1.4.1.14179.2.2.1.1.26IpAddressread-writecurrent
bsnAPGateway
OBJECT-TYPE
The Gateway for the AP.
1.3.6.1.4.1.14179.2.2.1.1.27IpAddressread-writecurrent
bsnAPStaticIPAddress
OBJECT-TYPE
The Static IP-Address configuration for the AP. This can only be changed when the LWAPP mode is in Layer-3.
1.3.6.1.4.1.14179.2.2.1.1.28IpAddressread-writecurrent
bsnAPBridgingSupport
OBJECT-TYPE
This specifies if this AP is a Bridging AP. Bridging APs can be used in Bridging or Mesh network configurations.
1.3.6.1.4.1.14179.2.2.1.1.29INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPGroupVlanName
OBJECT-TYPE
The AP Group to which this AP has been associated with. If it is empty, then no AP Group overriding has been set.
1.3.6.1.4.1.14179.2.2.1.1.30OCTET STRING (SIZE(0..32))read-writecurrent
bsnAPIOSVersion
OBJECT-TYPE
IOS Version of IOS Cisco AP. Zero length string will be returned for other APs
1.3.6.1.4.1.14179.2.2.1.1.31DisplayStringread-onlycurrent
bsnAPCertificateType
OBJECT-TYPE
Enum values denoting AP Certificate Type. 1 : manufactureinstalled : Manufacture Installed Certificate type (MIC). 2 : selfsigned : Self Signed Certificate type (SSC). 3 : localsignificance : Local Significance.
1.3.6.1.4.1.14179.2.2.1.1.32INTEGER {unknown(0), manufactureinstalled(1), selfsigned(2), localsignificance(3)}read-onlycurrent
bsnAPEthernetMacAddress
OBJECT-TYPE
The Ethernet MAC address of the AP.
1.3.6.1.4.1.14179.2.2.1.1.33MacAddressread-onlycurrent
bsnAPAdminStatus
OBJECT-TYPE
Admin State of the AP
1.3.6.1.4.1.14179.2.2.1.1.37INTEGER {enable(1), disable(2)}read-writedeprecated
bsnAPIfTable
OBJECT-TYPE
Each entry represents an 802.11 interface in an Airespace AP.
1.3.6.1.4.1.14179.2.2.2not-accessiblecurrent
bsnAPIfEntry
OBJECT-TYPE
An entry in bsnAPIfTable.
1.3.6.1.4.1.14179.2.2.2.1not-accessiblecurrent
bsnAPIfSlotId
OBJECT-TYPE
The slotId of this interface.
1.3.6.1.4.1.14179.2.2.2.1.1Unsigned32 (0..2)read-onlycurrent
bsnAPIfType
OBJECT-TYPE
The type of this interface. dot11b also implies 802.11b/g.
1.3.6.1.4.1.14179.2.2.2.1.2INTEGER {dot11b(1), dot11a(2), uwb(4), dot116ghz(6), dot11xor56ghz(7)}read-onlycurrent
bsnAPIfPhyChannelAssignment
OBJECT-TYPE
If this value is true, then bsnAPDot11CurrentChannel in bsnAPIfDot11PhyDSSSTable is assigned by dynamic algorithm and is read-only.
1.3.6.1.4.1.14179.2.2.2.1.3INTEGER {automatic(1), customized(2)}read-writecurrent
bsnAPIfPhyChannelNumber
OBJECT-TYPE
Current channel number of the AP Interface. Channel numbers will be from 1 to 14 for 802.11b interface type. Channel numbers will be from 34 to 169 for 802.11a interface type. Allowed channel numbers also depends on the current Country Code set in the Switch. This attribute cannot be set unless bsnAPIfPhyChannelAssignment is set to customized else this attribute gets assigned by dynamic algorithm.
1.3.6.1.4.1.14179.2.2.2.1.4INTEGER {ch1(1), ch2(2), ch3(3), ch4(4), ch5(5), ch6(6), ch7(7), ch8(8), ch9(9), ch10(10), ch11(11), ch12(12), ch13(13), ch14(14), ch20(20), ch21(21), ch22(22), ch23(23), ch24(24), ch25(25), ch26(26), ch34(34), ch36(36), ch38(38), ch40(40), ch42(42), ch44(44), ch46(46), ch48(48), ch52(52), ch56(56), ch60(60), ch64(64), ch100(100), ch104(104), ch108(108), ch112(112), ch116(116), ch120(120), ch124(124), ch128(128), ch132(132), ch136(136), ch140(140), ch149(149), ch153(153), ch157(157), ch161(161), ch165(165), ch169(169)}read-writecurrent
bsnAPIfPhyTxPowerControl
OBJECT-TYPE
If this value is true, then bsnAPIfPhyTxPowerLevel is assigned by dynamic algorithm and is read-only.
1.3.6.1.4.1.14179.2.2.2.1.5INTEGER {automatic(1), customized(2)}read-writecurrent
bsnAPIfPhyTxPowerLevel
OBJECT-TYPE
The TxPowerLevel currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA. Valid values are between 1 to 8,depnding on what radio, and this attribute can be set only if bsnAPIfPhyTxPowerControl is set to customized.
1.3.6.1.4.1.14179.2.2.2.1.6INTEGER (1..8)read-writecurrent
bsnAPIfPhyAntennaMode
OBJECT-TYPE
Antenna Mode of the AP Interface. For 802.11a this attribute will always be omni for now. This attribute doesn't apply to interface of type 802.11b.
1.3.6.1.4.1.14179.2.2.2.1.7INTEGER {sectorA(1), sectorB(2), omni(3), notapplicable(99)}read-writecurrent
bsnAPIfPhyAntennaType
OBJECT-TYPE
This attribute specified if the Antenna currently used by AP Radio is internal or external. For 802.11a the antenna is always internal. For 802.11b you can set antenna type to be external or internal.
1.3.6.1.4.1.14179.2.2.2.1.8INTEGER {internal(1), external(2)}read-writecurrent
bsnAPIfPhyAntennaDiversity
OBJECT-TYPE
Diversity doesn't apply to AP Radio of type 802.11a. For 802.11b you can set it to connectorA, connectorB or enabled.
1.3.6.1.4.1.14179.2.2.2.1.9INTEGER {connectorA(0), connectorB(1), enabled(255)}read-writecurrent
bsnAPIfCellSiteConfigId
OBJECT-TYPE
In a cell site configuration, this would be the cell Id of this AP Interface
1.3.6.1.4.1.14179.2.2.2.1.10Unsigned32read-writecurrent
bsnAPIfNumberOfVaps
OBJECT-TYPE
Number of WLANs currently active on this AP Interface.
1.3.6.1.4.1.14179.2.2.2.1.11INTEGER (1..16)read-onlycurrent
bsnAPIfOperStatus
OBJECT-TYPE
Operational status of the interface.
1.3.6.1.4.1.14179.2.2.2.1.12INTEGER {down(1), up(2)}read-onlycurrent
bsnAPIfPortNumber
OBJECT-TYPE
Port number on Airespace Switch on which the traffic from this AP interface is received.
1.3.6.1.4.1.14179.2.2.2.1.13INTEGER (0..65535)read-onlycurrent
bsnAPIfPhyAntennaOptions
OBJECT-TYPE
This attribute specifies the Antenna types supported by the AP Radio whether it is internal or external or both. internalAndExternal(0)- internal and external antenna for both 11a and 11b internal(1) - only internal antenna is allowed. siacAp- 11b internal and 11a external external - only external antenna is allowed for 11a and 11b ext11bInt11a - external antenna for 11b and internal antenna for 11a.
1.3.6.1.4.1.14179.2.2.2.1.14INTEGER {internalAndExternal(0), internal(1), siacAp(2), external(3), ext11bInt11a(4)}read-onlycurrent
bsnApIfNoOfUsers
OBJECT-TYPE
No of Users associated with this radio.
1.3.6.1.4.1.14179.2.2.2.1.15Counter32read-onlycurrent
bsnAPIfWlanOverride
OBJECT-TYPE
This flag when disabled implies that all WLANs are available from this radio. However, if this is enabled, then only those WLANs that appear in the bsnApIfWlanOverrideTable will be available from this radio.
1.3.6.1.4.1.14179.2.2.2.1.16INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPIfPacketsSniffingFeature
OBJECT-TYPE
This flag when enabled implies that AP will sniff the 802.11a/bg packets. However, if it is enabled, then user should enter the server-ip-address on which Airopeek is running and the 802.11a/bg-channel-number to be sniffed. The above feature will work only when AP is in 'Sniffer' mode.
1.3.6.1.4.1.14179.2.2.2.1.17INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPIfSniffChannel
OBJECT-TYPE
This the 802.11a/bg-channel-number on which AP will sniff the packets.
1.3.6.1.4.1.14179.2.2.2.1.18INTEGER {ch0(0), ch1(1), ch2(2), ch3(3), ch4(4), ch5(5), ch6(6), ch7(7), ch8(8), ch9(9), ch10(10), ch11(11), ch12(12), ch13(13), ch14(14), ch20(20), ch21(21), ch22(22), ch23(23), ch24(24), ch25(25), ch26(26), ch34(34), ch36(36), ch38(38), ch40(40), ch42(42), ch44(44), ch46(46), ch48(48), ch52(52), ch56(56), ch60(60), ch64(64), ch100(100), ch104(104), ch108(108), ch112(112), ch116(116), ch120(120), ch124(124), ch128(128), ch132(132), ch136(136), ch140(140), ch149(149), ch153(153), ch157(157), ch161(161), ch165(165), ch169(169)}read-writecurrent
bsnAPIfSniffServerIPAddress
OBJECT-TYPE
The machine ip address on which Airopeek application is running.
1.3.6.1.4.1.14179.2.2.2.1.19IpAddressread-writecurrent
bsnAPIfAntennaGain
OBJECT-TYPE
Represents antenna gain in multiple of 0.5 dBm. An integer value 4 means 4 x 0.5 = 2 dBm of gain
1.3.6.1.4.1.14179.2.2.2.1.20INTEGER (0..40)read-writecurrent
bsnAPIfChannelList
OBJECT-TYPE
List of comma separated channels supported by this radio.
1.3.6.1.4.1.14179.2.2.2.1.21DisplayStringread-writecurrent
bsnAPIfAbsolutePowerList
OBJECT-TYPE
List of comma separated absolute power levels supported by this radio.
1.3.6.1.4.1.14179.2.2.2.1.22DisplayStringread-writecurrent
bsnAPIfRegulatoryDomainSupport
OBJECT-TYPE
If the regulatory domain on radio is supported or notSupported on the controller
1.3.6.1.4.1.14179.2.2.2.1.23INTEGER {notSupported(0), supported(1)}read-onlycurrent
bsnAPIfPhyS80EightyChannelNumber
OBJECT-TYPE
Secondary 80MHz channel number of the AP Interface. Allowed channel numbers also depends on the current Country Code set in the Switch.
1.3.6.1.4.1.14179.2.2.2.1.28INTEGERread-writedeprecated
bsnAPIfAdminStatus
OBJECT-TYPE
Admin status of the interface.
1.3.6.1.4.1.14179.2.2.2.1.34INTEGER {enable(1), disable(2)}read-writedeprecated
bsnAPIfSmtParamTable
OBJECT-TYPE
Each entry represents SMT parameters on an 802.11 interface of an Airespace AP.
1.3.6.1.4.1.14179.2.2.3not-accessiblecurrent
bsnAPIfSmtParamEntry
OBJECT-TYPE
An entry in bsnAPIfSmtParamTable
1.3.6.1.4.1.14179.2.2.3.1not-accessiblecurrent
bsnAPIfDot11BeaconPeriod
OBJECT-TYPE
This attribute shall specify the number of TU that a AP Interface shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.
1.3.6.1.4.1.14179.2.2.3.1.1INTEGER (20..1000)read-onlycurrent
bsnAPIfDot11MediumOccupancyLimit
OBJECT-TYPE
This attribute shall indicate the maximum amount of time, in TU, that a point coordinator may control the usage of the wireless medium without relinquishing control for long enough to allow at least one instance of DCF access to the medium. The default value of this attribute shall be 100, and the maximum value shall be 1000.
1.3.6.1.4.1.14179.2.2.3.1.2INTEGER (0..1000)read-onlycurrent
bsnAPIfDot11CFPPeriod
OBJECT-TYPE
The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.2.3.1.3INTEGER (0..255)read-onlycurrent
bsnAPIfDot11CFPMaxDuration
OBJECT-TYPE
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.2.3.1.4INTEGER (0..65535)read-onlycurrent
bsnAPIfDot11OperationalRateSet
OBJECT-TYPE
This attribute shall specify the set of data rates at which the AP Interface may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the AP Interface desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
1.3.6.1.4.1.14179.2.2.3.1.5OCTET STRING (SIZE(1..126))read-onlycurrent
bsnAPIfDot11DTIMPeriod
OBJECT-TYPE
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
1.3.6.1.4.1.14179.2.2.3.1.6INTEGER (1..255)read-onlycurrent
bsnAPIfDot11MultiDomainCapabilityImplemented
OBJECT-TYPE
This attribute, when TRUE, indicates that the AP Interface implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default value of this attribute is FALSE.
1.3.6.1.4.1.14179.2.2.3.1.7INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnAPIfDot11MultiDomainCapabilityEnabled
OBJECT-TYPE
This attribute, when TRUE, indicates that the capability of the AP Interface to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE.
1.3.6.1.4.1.14179.2.2.3.1.8INTEGER {no(0), yes(1)}read-onlycurrent
bsnAPIfDot11CountryString
OBJECT-TYPE
This attribute identifies the country in which the AP Interface is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be one of the following: 1. an ASCII space character, if the regulations under which the AP Interface is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the AP Interface is operating are for an Outdoor environment only, or 3. an ASCII 'I' character, if the regulations under which the AP Interface is operating are for an Indoor environment only.
1.3.6.1.4.1.14179.2.2.3.1.9OCTET STRING (SIZE(3))read-onlycurrent
bsnAPIfDot11SmtParamsConfigType
OBJECT-TYPE
This attribute suggests if the Station parameters for this radio are automatically set or have been customized.
1.3.6.1.4.1.14179.2.2.3.1.10INTEGER {automatic(0), customized(1)}read-onlycurrent
bsnAPIfDot11BSSID
OBJECT-TYPE
BSSID of this AP config which would be the MAC Address of AP
1.3.6.1.4.1.14179.2.2.3.1.30MacAddressread-onlycurrent
bsnAPIfMultiDomainCapabilityTable
OBJECT-TYPE
Each entry represents an 803.2 or an 802.11 interface in an Airespace AP.
1.3.6.1.4.1.14179.2.2.4not-accessiblecurrent
bsnAPIfMultiDomainCapabilityEntry
OBJECT-TYPE
Each entry represents an 803.2 or an 802.11 interface in an Airespace AP.
1.3.6.1.4.1.14179.2.2.4.1not-accessiblecurrent
bsnAPIfDot11MaximumTransmitPowerLevel
OBJECT-TYPE
This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.2.4.1.1Integer32read-onlycurrent
bsnAPIfDot11FirstChannelNumber
OBJECT-TYPE
This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.2.4.1.2Integer32read-onlycurrent
bsnAPIfDot11NumberofChannels
OBJECT-TYPE
This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.2.4.1.20Integer32read-onlycurrent
bsnAPIfMacOperationParamTable
OBJECT-TYPE
Group contains MAC attributes pertaining to the operation of the MAC. These would be read only attributes as they would be updated by RRM Dynamic Algorithm. If user needs to configure them then they can only be configured globally
1.3.6.1.4.1.14179.2.2.5not-accessiblecurrent
bsnAPIfMacOperationParamEntry
OBJECT-TYPE
An entry in the bsnAPIfMacOperationParamEntry Table. Interface tables in this MIB module are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId.
1.3.6.1.4.1.14179.2.2.5.1not-accessiblecurrent
bsnAPIfDot11MacRTSThreshold
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.1INTEGER (0..2347)read-onlycurrent
bsnAPIfDot11MacShortRetryLimit
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.2INTEGER (1..255)read-onlycurrent
bsnAPIfDot11MacLongRetryLimit
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.3INTEGER (1..255)read-onlycurrent
bsnAPIfDot11MacFragmentationThreshold
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.4INTEGER (256..2346)read-onlycurrent
bsnAPIfDot11MacMaxTransmitMSDULifetime
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.5Unsigned32 (1..4294967295)read-onlycurrent
bsnAPIfDot11MacParamsConfigType
OBJECT-TYPE
This attribute suggests if the MAC parameters for this radio are automatically set or have been customized.
1.3.6.1.4.1.14179.2.2.5.1.6INTEGER {automatic(0), customized(1)}read-onlycurrent
bsnAPIfDot11MacMaxReceiveLifetime
OBJECT-TYPE
If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm
1.3.6.1.4.1.14179.2.2.5.1.25Unsigned32 (1..4294967295)read-onlycurrent
bsnAPIfDot11CountersTable
OBJECT-TYPE
Group containing attributes that are MAC counters. Each instance represents counters on a AP dot11 interface
1.3.6.1.4.1.14179.2.2.6not-accessiblecurrent
bsnAPIfDot11CountersEntry
OBJECT-TYPE
An entry in the dot11CountersEntry Table. Interface tables in this MIB module are indexed by bsnAPDot3MacAddress and bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.6.1not-accessiblecurrent
bsnAPIfDot11TransmittedFragmentCount
OBJECT-TYPE
This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management.
1.3.6.1.4.1.14179.2.2.6.1.1Counter32read-onlycurrent
bsnAPIfDot11MulticastTransmittedFrameCount
OBJECT-TYPE
This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs.
1.3.6.1.4.1.14179.2.2.6.1.2Counter32read-onlycurrent
bsnAPIfDot11RetryCount
OBJECT-TYPE
This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions.
1.3.6.1.4.1.14179.2.2.6.1.3Counter32read-onlycurrent
bsnAPIfDot11MultipleRetryCount
OBJECT-TYPE
This counter shall increment when an MSDU is successfully transmitted after more than one retransmission.
1.3.6.1.4.1.14179.2.2.6.1.4Counter32read-onlycurrent
bsnAPIfDot11FrameDuplicateCount
OBJECT-TYPE
This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate.
1.3.6.1.4.1.14179.2.2.6.1.5Counter32read-onlycurrent
bsnAPIfDot11RTSSuccessCount
OBJECT-TYPE
This counter shall increment when a CTS is received in response to an RTS.
1.3.6.1.4.1.14179.2.2.6.1.6Counter32read-onlycurrent
bsnAPIfDot11RTSFailureCount
OBJECT-TYPE
This counter shall increment when a CTS is not received in response to an RTS.
1.3.6.1.4.1.14179.2.2.6.1.7Counter32read-onlycurrent
bsnAPIfDot11ACKFailureCount
OBJECT-TYPE
This counter shall increment when an ACK is not received when expected.
1.3.6.1.4.1.14179.2.2.6.1.8Counter32read-onlycurrent
bsnAPIfDot11ReceivedFragmentCount
OBJECT-TYPE
This counter shall be incremented for each successfully received MPDU of type Data or Management.
1.3.6.1.4.1.14179.2.2.6.1.9Counter32read-onlycurrent
bsnAPIfDot11MulticastReceivedFrameCount
OBJECT-TYPE
This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address.
1.3.6.1.4.1.14179.2.2.6.1.10Counter32read-onlycurrent
bsnAPIfDot11FCSErrorCount
OBJECT-TYPE
This counter shall increment when an FCS error is detected in a received MPDU.
1.3.6.1.4.1.14179.2.2.6.1.11Counter32read-onlycurrent
bsnAPIfDot11TransmittedFrameCount
OBJECT-TYPE
This counter shall increment for each successfully transmitted MSDU.
1.3.6.1.4.1.14179.2.2.6.1.12Counter32read-onlycurrent
bsnAPIfDot11WEPUndecryptableCount
OBJECT-TYPE
This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
1.3.6.1.4.1.14179.2.2.6.1.13Counter32read-onlycurrent
bsnAPIfDot11FailedCount
OBJECT-TYPE
This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the bsnAPIfDot11ShortRetryLimit or dot11LongRetryLimit.
1.3.6.1.4.1.14179.2.2.6.1.33Counter32read-onlycurrent
bsnAPIfDot11PhyTxPowerTable
OBJECT-TYPE
Group of attributes for bsnAPIfDot11PhyTxPowerTable. Implemented as a table indexed on STA ID to allow for multiple instances on an Agent. This table has been deprecated. The level and power can be obtained from bsnAPIfTable(bsnAPIfAbsolutePowerList).
1.3.6.1.4.1.14179.2.2.8not-accessibledeprecated
bsnAPIfDot11PhyTxPowerEntry
OBJECT-TYPE
An entry in the bsnAPIfDot11PhyTxPower Table. Interface tables in this MIB module are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId.
1.3.6.1.4.1.14179.2.2.8.1not-accessibledeprecated
bsnAPIfDot11NumberSupportedPowerLevels
OBJECT-TYPE
The number of power levels supported by the PMD. This attribute can have a value of 1 to 8.
1.3.6.1.4.1.14179.2.2.8.1.1INTEGER (1..8)read-onlydeprecated
bsnAPIfDot11TxPowerLevel1
OBJECT-TYPE
The transmit output power for LEVEL1 in mW. This is also the default power level. It is same as the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.2INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel2
OBJECT-TYPE
The transmit output power for LEVEL2 in mW. It is 1/2 of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.3INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel3
OBJECT-TYPE
The transmit output power for LEVEL3 in mW. It is 1/4th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.4INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel4
OBJECT-TYPE
The transmit output power for LEVEL4 in mW. It is 1/8th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.5INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel5
OBJECT-TYPE
The transmit output power for LEVEL5 in mW. It is 1/16th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.6INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel6
OBJECT-TYPE
The transmit output power for LEVEL6 in mW. It is 1/32th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.7INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel7
OBJECT-TYPE
The transmit output power for LEVEL7 in mW. It is 1/64th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.8INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11TxPowerLevel8
OBJECT-TYPE
The transmit output power for LEVEL8 in mW. It is 1/128th of the Maximum power level available on an AP interface.
1.3.6.1.4.1.14179.2.2.8.1.28INTEGER (0..10000)read-onlydeprecated
bsnAPIfDot11PhyChannelTable
OBJECT-TYPE
Entry of attributes for bsnAPIfDot11PhyChannelEntry. Implemented as a table indexed on bsnAPDot3MacAddress, bsnAPIfSlotId allow for multiple instances on an Agent
1.3.6.1.4.1.14179.2.2.9not-accessiblecurrent
bsnAPIfDot11PhyChannelEntry
OBJECT-TYPE
An entry in the bsnAPIfDot11PhyChannelEntry Table. Interface tables in this MIB module are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId.
1.3.6.1.4.1.14179.2.2.9.1not-accessiblecurrent
bsnAPIfDot11CurrentCCAMode
OBJECT-TYPE
The current CCA method in operation.Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (edandcs)= 04 carrier sense with timer (cswithtimer)= 08 high rate carrier sense and energy detect (hrcsanded)=16.
1.3.6.1.4.1.14179.2.2.9.1.1INTEGER {edonly(1), csonly(2), edandcs(4), cswithtimer(8), hrcsanded(16)}read-onlydeprecated
bsnAPIfDot11EDThreshold
OBJECT-TYPE
The current Energy Detect Threshold being used by the Channel PHY.
1.3.6.1.4.1.14179.2.2.9.1.2Integer32read-onlycurrent
bsnAPIfDot11TIThreshold
OBJECT-TYPE
The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold.
1.3.6.1.4.1.14179.2.2.9.1.23Integer32read-onlycurrent
bsnAPIfProfileThresholdConfigTable
OBJECT-TYPE
Table of attributes for various thresholds to be set on each Airespace AP Interface for Load performance profile , interference performance profile and Noise performance profile.
1.3.6.1.4.1.14179.2.2.12not-accessiblecurrent
bsnAPIfProfileThresholdConfigEntry
OBJECT-TYPE
An entry (conceptual row) in the Phy Thresholds Table. Entries in this MIB are indexed by bsnAPDot3MacAddress and bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.12.1not-accessiblecurrent
bsnAPIfProfileParamAssignment
OBJECT-TYPE
If this value is automatic then Profile Parameters in bsnRrmDot11aAPProfile at the global level will be used. If this value is customized then Profile Parameters in bsnAPIfProfileThresholdConfig Table will be used and user can customize them per AP.
1.3.6.1.4.1.14179.2.2.12.1.1INTEGER {automatic(1), customized(2)}read-writecurrent
bsnAPIfForeignInterferenceThreshold
OBJECT-TYPE
foreign interference threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.2.12.1.2INTEGER (0..100)read-writecurrent
bsnAPIfForeignNoiseThreshold
OBJECT-TYPE
foreign noise threshold between -100 and -50 dBm.
1.3.6.1.4.1.14179.2.2.12.1.3INTEGER (-127..0)read-writecurrent
bsnAPIfRFUtilizationThreshold
OBJECT-TYPE
RF utlization threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.2.12.1.4INTEGER (0..100)read-writecurrent
bsnAPIfThroughputThreshold
OBJECT-TYPE
Airespace AP data-rate threshold between 1000 and 100000
1.3.6.1.4.1.14179.2.2.12.1.5Unsigned32 (1000..1000000)read-writecurrent
bsnAPIfMobilesThreshold
OBJECT-TYPE
Airespace AP mobiles threshold between 1 and 75
1.3.6.1.4.1.14179.2.2.12.1.6INTEGER (1..75)read-writecurrent
bsnAPIfCoverageThreshold
OBJECT-TYPE
Airespace AP coverage threshold between 3 and 50
1.3.6.1.4.1.14179.2.2.12.1.7INTEGER (3..50)read-writecurrent
bsnAPIfMobileMinExceptionLevel
OBJECT-TYPE
Airespace AP mobile minimum exception level between 1 and 1000
1.3.6.1.4.1.14179.2.2.12.1.8INTEGER (1..75)read-writecurrent
bsnAPIfCoverageExceptionLevel
OBJECT-TYPE
Airespace AP coverage exception level between 0 and 100 percent.
1.3.6.1.4.1.14179.2.2.12.1.28INTEGER (0..100)read-writecurrent
bsnAPIfLoadParametersTable
OBJECT-TYPE
These are RRM performance related read only parameters per Airespace AP
1.3.6.1.4.1.14179.2.2.13not-accessiblecurrent
bsnAPIfLoadParametersEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress and bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.13.1not-accessiblecurrent
bsnAPIfLoadRxUtilization
OBJECT-TYPE
This is the percentage of time the Airespace AP receiver is busy operating on packets. It is a number from 0-100 representing a load from 0 to 1.
1.3.6.1.4.1.14179.2.2.13.1.1INTEGER (0..100)read-onlycurrent
bsnAPIfLoadTxUtilization
OBJECT-TYPE
This is the percentage of time the Airespace AP transmitter is busy operating on packets. It is a number from 0-100 representing a load from 0 to 1.
1.3.6.1.4.1.14179.2.2.13.1.2INTEGER (0..100)read-onlycurrent
bsnAPIfLoadChannelUtilization
OBJECT-TYPE
Channel Utilization
1.3.6.1.4.1.14179.2.2.13.1.3INTEGER (0..100)read-onlycurrent
bsnAPIfLoadNumOfClients
OBJECT-TYPE
This is the number of clients attached to this Airespace AP at the last measurement interval(This comes from APF)
1.3.6.1.4.1.14179.2.2.13.1.4Integer32read-onlycurrent
bsnAPIfPoorSNRClients
OBJECT-TYPE
This is the number of clients with poor SNR attached to this Airespace AP at the last measurement interval ( This comes from APF ).
1.3.6.1.4.1.14179.2.2.13.1.24Integer32read-onlycurrent
bsnAPIfChannelInterferenceInfoTable
OBJECT-TYPE
This is a table of channel information like interference and noise from other 802.11 networks on each channel.
1.3.6.1.4.1.14179.2.2.14not-accessiblecurrent
bsnAPIfChannelInterferenceInfoEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.14.1not-accessiblecurrent
bsnAPIfInterferenceChannelNo
OBJECT-TYPE
Channel Number on AP
1.3.6.1.4.1.14179.2.2.14.1.1Integer32read-onlycurrent
bsnAPIfInterferencePower
OBJECT-TYPE
Power of Interference from other 802.11 networks on this channel
1.3.6.1.4.1.14179.2.2.14.1.2Integer32read-onlycurrent
bsnAPIfInterferenceUtilization
OBJECT-TYPE
Interference from other 802.11 networks on this channel
1.3.6.1.4.1.14179.2.2.14.1.22INTEGER (0..100)read-onlycurrent
bsnAPIfChannelNoiseInfoTable
OBJECT-TYPE
This is a table of channel information like interference and noise from other 802.11 networks on each channel.
1.3.6.1.4.1.14179.2.2.15not-accessiblecurrent
bsnAPIfChannelNoiseInfoEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.15.1not-accessiblecurrent
bsnAPIfNoiseChannelNo
OBJECT-TYPE
Channel Number on AP
1.3.6.1.4.1.14179.2.2.15.1.1Integer32read-onlycurrent
bsnAPIfDBNoisePower
OBJECT-TYPE
This is the average noise power in dBm on each channel that is available to Airespace AP
1.3.6.1.4.1.14179.2.2.15.1.21Integer32read-onlycurrent
bsnAPIfProfileStateTable
OBJECT-TYPE
This is a table of state of interference monitor on each Airespace AP
1.3.6.1.4.1.14179.2.2.16not-accessiblecurrent
bsnAPIfProfileStateEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.16.1not-accessiblecurrent
bsnAPIfLoadProfileState
OBJECT-TYPE
This field represents the current state of the LOAD monitor. This is a total measurement of the business of this Airespace AP. PASS indicates that this Airespace AP is performing adequately compared to the Airespace AP profile. FAIL indicates the Airespace AP is not performing adequately against the LOAD profile.
1.3.6.1.4.1.14179.2.2.16.1.1ProfileStateread-onlycurrent
bsnAPIfInterferenceProfileState
OBJECT-TYPE
This field represents the current state of Interference monitor. This is a total measurement of the interference present at this Airespace AP. PASS indicates that this Airespace AP is performing adequately compared to the Interference profile. FAIL indicates the Airespace AP is not performing adequately against the Interference profile.
1.3.6.1.4.1.14179.2.2.16.1.2ProfileStateread-onlycurrent
bsnAPIfNoiseProfileState
OBJECT-TYPE
This field represents the current state of Noise monitor. This is a total measurement of the noise present at this Airespace AP. PASS indicates that this Airespace AP is performing adequately compared to the noise profile. FAIL indicates the Airespace AP is not performing adequately against the noise profile.
1.3.6.1.4.1.14179.2.2.16.1.3ProfileStateread-onlycurrent
bsnAPIfCoverageProfileState
OBJECT-TYPE
This field represents the current state of coverage monitor. This is a total measurement of the client coverage at this Airespace AP. PASS indicates that this Airespace AP is performing adequately compared to the coverage profile. FAIL indicates the Airespace AP is not performing adequately against the coverage profile.
1.3.6.1.4.1.14179.2.2.16.1.24ProfileStateread-onlycurrent
bsnAPIfRxNeighborsTable
OBJECT-TYPE
This is a table of Rx Neighbors for each Airespace AP with their RSSI value.
1.3.6.1.4.1.14179.2.2.17not-accessiblecurrent
bsnAPIfRxNeighborsEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress bsnAPIfSlotId, bsnAPIfRxNeighborMacAddress
1.3.6.1.4.1.14179.2.2.17.1not-accessiblecurrent
bsnAPIfRxNeighborMacAddress
OBJECT-TYPE
MAC Address of Rx Neighbor of the Airespace AP
1.3.6.1.4.1.14179.2.2.17.1.1MacAddressread-onlycurrent
bsnAPIfRxNeighborIpAddress
OBJECT-TYPE
IP Address of Rx Neighbor of the Airespace AP
1.3.6.1.4.1.14179.2.2.17.1.2IpAddressread-onlycurrent
bsnAPIfRxNeighborRSSI
OBJECT-TYPE
RSSI value of the Rx Neighbor
1.3.6.1.4.1.14179.2.2.17.1.3Integer32read-onlycurrent
bsnAPIfRxNeighborSlot
OBJECT-TYPE
Slot value of the Rx Neighbor
1.3.6.1.4.1.14179.2.2.17.1.24Integer32read-onlycurrent
bsnAPIfRxNeighborChannel
OBJECT-TYPE
This object represents Channel information which neighboring Access point is using.
1.3.6.1.4.1.14179.2.2.17.1.26Integer32read-onlycurrent
bsnAPIfRxNeighborChannelWidth
OBJECT-TYPE
This object represents Channel bandwidth information which neighboring Access point is using.
1.3.6.1.4.1.14179.2.2.17.1.27INTEGER {five(1), ten(2), twenty(3), aboveforty(4), belowforty(5)}read-onlycurrent
bsnAPIfStationRSSICoverageInfoTable
OBJECT-TYPE
This is a table of channel information like interference and noise from other 802.11 networks on each channel.
1.3.6.1.4.1.14179.2.2.18not-accessiblecurrent
bsnAPIfStationRSSICoverageInfoEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.18.1not-accessiblecurrent
bsnAPIfStationRSSICoverageIndex
OBJECT-TYPE
RSSI Coverage Index on AP
1.3.6.1.4.1.14179.2.2.18.1.1Integer32read-onlycurrent
bsnAPIfRSSILevel
OBJECT-TYPE
RSSI Level
1.3.6.1.4.1.14179.2.2.18.1.2Integer32read-onlycurrent
bsnAPIfStationCountOnRSSI
OBJECT-TYPE
Number of stations on this RSSI Level
1.3.6.1.4.1.14179.2.2.18.1.23Integer32read-onlycurrent
bsnAPIfStationSNRCoverageInfoTable
OBJECT-TYPE
This is a table of Signal to Noise ratio Coverage information on an AP Interface.
1.3.6.1.4.1.14179.2.2.19not-accessiblecurrent
bsnAPIfStationSNRCoverageInfoEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.19.1not-accessiblecurrent
bsnAPIfStationSNRCoverageIndex
OBJECT-TYPE
SNR Coverage Index on AP
1.3.6.1.4.1.14179.2.2.19.1.1Integer32read-onlycurrent
bsnAPIfSNRLevel
OBJECT-TYPE
SNR Level
1.3.6.1.4.1.14179.2.2.19.1.2Integer32read-onlycurrent
bsnAPIfStationCountOnSNR
OBJECT-TYPE
Number of stations on this SNR Level
1.3.6.1.4.1.14179.2.2.19.1.23Integer32read-onlycurrent
bsnAPIfRecommendedRFParametersTable
OBJECT-TYPE
This table list Best Channel,Best TxPowerLevel, Best RTSThreshold,Best FragmentationThreshold etc for this AP Interface as determined by RRM.
1.3.6.1.4.1.14179.2.2.20not-accessiblecurrent
bsnAPIfRecommendedRFParametersEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId
1.3.6.1.4.1.14179.2.2.20.1not-accessiblecurrent
bsnAPIfRecommendedChannelNumber
OBJECT-TYPE
Recommended ChannelNumber by RRM for this APIf
1.3.6.1.4.1.14179.2.2.20.1.1Integer32read-onlycurrent
bsnAPIfRecommendedTxPowerLevel
OBJECT-TYPE
Recommended TxPowerLevel by RRM for this APIf
1.3.6.1.4.1.14179.2.2.20.1.2Integer32read-onlycurrent
bsnAPIfRecommendedRTSThreshold
OBJECT-TYPE
Recommended RTSThreshold by RRM for this APIf
1.3.6.1.4.1.14179.2.2.20.1.3Integer32read-onlycurrent
bsnAPIfRecommendedFragmentationThreshold
OBJECT-TYPE
Recommended Fragmentation Threshold by RRM for this APIf
1.3.6.1.4.1.14179.2.2.20.1.24Integer32read-onlycurrent
bsnAPIfWlanOverrideTable
OBJECT-TYPE
Each entry represents an SSID added to the AP when the attribute bsnAPIfWlanOverride on the radio is enabled. This means only those WLANs on the switch that are added to this table will be available on such a radio.
1.3.6.1.4.1.14179.2.2.21not-accessiblecurrent
bsnAPIfWlanOverrideEntry
OBJECT-TYPE
An entry in bsnAPIfWlanOverrideTable
1.3.6.1.4.1.14179.2.2.21.1not-accessiblecurrent
bsnAPIfWlanOverrideId
OBJECT-TYPE
Index of the WLAN (bsnDot11EssIndex) added to the radio. Airespace Switch supports 16 Airespace WLANs so index will be from 1 to 16.
1.3.6.1.4.1.14179.2.2.21.1.1Unsigned32 (1..16)read-createcurrent
bsnAPIfWlanOverrideSsid
OBJECT-TYPE
SSID assigned to the override WLAN.
1.3.6.1.4.1.14179.2.2.21.1.2DisplayString (SIZE(1..32))read-onlycurrent
bsnAPIfWlanOverrideRowStatus
OBJECT-TYPE
A row status type for the bsnAPIfWlanOverrideEntry
1.3.6.1.4.1.14179.2.2.21.1.15RowStatusread-createcurrent
bsnMeshNodeTable
OBJECT-TYPE
This is a table of mesh nodes.
1.3.6.1.4.1.14179.2.2.22not-accessiblecurrent
bsnMeshNodeEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress
1.3.6.1.4.1.14179.2.2.22.1not-accessiblecurrent
bsnMeshNodeRole
OBJECT-TYPE
the role of this AP
1.3.6.1.4.1.14179.2.2.22.1.1INTEGER {pap(0), rap(1)}read-onlycurrent
bsnMeshNodeGroup
OBJECT-TYPE
the bridge group name of this AP
1.3.6.1.4.1.14179.2.2.22.1.2OCTET STRING (SIZE(0..10))read-onlycurrent
bsnMeshNodeBackhaul
OBJECT-TYPE
the backhaul radio device for this AP
1.3.6.1.4.1.14179.2.2.22.1.3INTEGER {dot11a(0), dot11b(1), dot11g(2)}read-onlycurrent
bsnMeshNodeBackhaulPAP
OBJECT-TYPE
the backhaul
1.3.6.1.4.1.14179.2.2.22.1.4INTEGER {auto(0), dot11a(1), dot11b(2), dot11g(3)}read-onlycurrent
bsnMeshNodeBackhaulRAP
OBJECT-TYPE
the backhaul radio device for this AP
1.3.6.1.4.1.14179.2.2.22.1.5INTEGER {dot11a(0), dot11b(1), dot11g(2)}read-writecurrent
bsnMeshNodeDataRate
OBJECT-TYPE
this nodes backhaul data rate
1.3.6.1.4.1.14179.2.2.22.1.6Integer32read-writecurrent
bsnMeshNodeChannel
OBJECT-TYPE
this nodes backhaul channel
1.3.6.1.4.1.14179.2.2.22.1.7Integer32read-onlycurrent
bsnMeshNodeRoutingState
OBJECT-TYPE
routing state
1.3.6.1.4.1.14179.2.2.22.1.8INTEGER {start(1), seek(2), sync(3), auth(4), maint(5)}read-onlycurrent
bsnMeshNodeMalformedNeighPackets
OBJECT-TYPE
the number of malformed neighbor packets.
1.3.6.1.4.1.14179.2.2.22.1.9Counter32read-onlycurrent
bsnMeshNodePoorNeighSnr
OBJECT-TYPE
poor neighbor snr
1.3.6.1.4.1.14179.2.2.22.1.10Counter32read-onlycurrent
bsnMeshNodeBlacklistPackets
OBJECT-TYPE
the number of excluded list packets received
1.3.6.1.4.1.14179.2.2.22.1.11Counter32read-onlycurrent
bsnMeshNodeInsufficientMemory
OBJECT-TYPE
occurences of insufficient memory conditions
1.3.6.1.4.1.14179.2.2.22.1.12Counter32read-onlycurrent
bsnMeshNodeRxNeighReq
OBJECT-TYPE
Rx neighbor requests
1.3.6.1.4.1.14179.2.2.22.1.13Counter32read-onlycurrent
bsnMeshNodeRxNeighRsp
OBJECT-TYPE
Rx neighbor responses
1.3.6.1.4.1.14179.2.2.22.1.14Counter32read-onlycurrent
bsnMeshNodeTxNeighReq
OBJECT-TYPE
Tx neighbor requests
1.3.6.1.4.1.14179.2.2.22.1.15Counter32read-onlycurrent
bsnMeshNodeTxNeighRsp
OBJECT-TYPE
Tx neighbor responses
1.3.6.1.4.1.14179.2.2.22.1.16Counter32read-onlycurrent
bsnMeshNodeParentChanges
OBJECT-TYPE
number of parent changes
1.3.6.1.4.1.14179.2.2.22.1.17Counter32read-onlycurrent
bsnMeshNodeNeighTimeout
OBJECT-TYPE
number of neighbor timeouts
1.3.6.1.4.1.14179.2.2.22.1.18Counter32read-onlycurrent
bsnMeshNodeParentMacAddress
OBJECT-TYPE
parents mac addressed
1.3.6.1.4.1.14179.2.2.22.1.19MacAddressread-onlycurrent
bsnMeshNodeAPType
OBJECT-TYPE
the type of AP
1.3.6.1.4.1.14179.2.2.22.1.20INTEGER {indoorBridge(5), outdoorBridge(6)}read-onlycurrent
bsnMeshNodeEthernetBridge
OBJECT-TYPE
enable : Enables ethernet bridging on the AP. disable : Disables ethernet bridging on the AP. Changes are only applicable when AP is in 'Bridge' mode.
1.3.6.1.4.1.14179.2.2.22.1.21INTEGER {disable(0), enable(1)}read-writecurrent
bsnMeshNodeHops
OBJECT-TYPE
number of hops to rap
1.3.6.1.4.1.14179.2.2.22.1.30Integer32read-onlycurrent
bsnMeshNeighsTable
OBJECT-TYPE
This is a table of mesh neighbors.
1.3.6.1.4.1.14179.2.2.23not-accessiblecurrent
bsnMeshNeighsEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress and bsnMeshNeighNeighMacAddress
1.3.6.1.4.1.14179.2.2.23.1not-accessiblecurrent
bsnMeshNeighMacAddress
OBJECT-TYPE
MAC Address of neighbor
1.3.6.1.4.1.14179.2.2.23.1.1MacAddressread-onlycurrent
bsnMeshNeighType
OBJECT-TYPE
neighbor type
1.3.6.1.4.1.14179.2.2.23.1.2INTEGER {parent(0), tentparent(1), neigh(2), blacklisted(3), child(4)}read-onlycurrent
bsnMeshNeighState
OBJECT-TYPE
neighbor state
1.3.6.1.4.1.14179.2.2.23.1.3INTEGER {updated(0), needupdate(1)}read-onlycurrent
bsnMeshNeighSnr
OBJECT-TYPE
explicitly set SNR
1.3.6.1.4.1.14179.2.2.23.1.4Integer32read-onlycurrent
bsnMeshNeighSnrUp
OBJECT-TYPE
snr up
1.3.6.1.4.1.14179.2.2.23.1.5Integer32read-onlycurrent
bsnMeshNeighSnrDown
OBJECT-TYPE
snr down
1.3.6.1.4.1.14179.2.2.23.1.6Integer32read-onlycurrent
bsnMeshNeighLinkSnr
OBJECT-TYPE
link snr
1.3.6.1.4.1.14179.2.2.23.1.7Integer32read-onlycurrent
bsnMeshNeighAdjustedEase
OBJECT-TYPE
hops adjusted ease
1.3.6.1.4.1.14179.2.2.23.1.8Integer32read-onlycurrent
bsnMeshNeighUnadjustedEase
OBJECT-TYPE
ease to root AP from this AP
1.3.6.1.4.1.14179.2.2.23.1.9Integer32read-onlycurrent
bsnMeshNeighRapEase
OBJECT-TYPE
unadjusted ease received in last hello
1.3.6.1.4.1.14179.2.2.23.1.10Integer32read-onlycurrent
bsnMeshNeighTxParent
OBJECT-TYPE
tx packets to this node while a parent
1.3.6.1.4.1.14179.2.2.23.1.11Counter32read-onlycurrent
bsnMeshNeighRxParent
OBJECT-TYPE
rx packets from this node while a parent
1.3.6.1.4.1.14179.2.2.23.1.12Counter32read-onlycurrent
bsnMeshNeighPoorSnr
OBJECT-TYPE
packets with poor snr received from this node
1.3.6.1.4.1.14179.2.2.23.1.13Counter32read-onlycurrent
bsnMeshNeighLastUpdate
OBJECT-TYPE
last received hello from this neighbor
1.3.6.1.4.1.14179.2.2.23.1.14Integer32read-onlycurrent
bsnMeshNeighParentChange
OBJECT-TYPE
when this node last became parent
1.3.6.1.4.1.14179.2.2.23.1.20Integer32read-onlycurrent
bsnAPIfRadarChannelStatisticsTable
OBJECT-TYPE
This is a table of channel information on which radar signal were detected. This will give the list of channels and last heard timestamp. Radar signals are detected only on 5Ghz range. So this will be detected for 802.11a interface.
1.3.6.1.4.1.14179.2.2.24not-accessiblecurrent
bsnAPIfRadarChannelStatisticsEntry
OBJECT-TYPE
An entry (conceptual row) in the Table. Entries in this MIB are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId, bsnAPIfRadarDetectedCannelNumber.
1.3.6.1.4.1.14179.2.2.24.1not-accessiblecurrent
bsnAPIfRadarDetectedChannelNumber
OBJECT-TYPE
Channel Number on which radar signals were detected.
1.3.6.1.4.1.14179.2.2.24.1.1Integer32read-onlycurrent
bsnAPIfRadarSignalLastHeard
OBJECT-TYPE
This tells how many seconds ago radar signal was heard on the channel.
1.3.6.1.4.1.14179.2.2.24.1.2Integer32read-onlycurrent
bsnGlobalDot11
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3
bsnGlobalDot11Config
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1
bsnGlobalDot11PrivacyOptionImplemented
OBJECT-TYPE
This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute shall be false.
1.3.6.1.4.1.14179.2.3.1.1INTEGER {notimplemented(0), implemented(1)}read-onlycurrent
bsnGlobalDot11AuthenticationResponseTimeOut
OBJECT-TYPE
This attribute shall specify the number of TU that a responding STA should wait for the next frame in the authentication sequence.
1.3.6.1.4.1.14179.2.3.1.2Unsigned32 (5..60)read-writecurrent
bsnGlobalDot11MultiDomainCapabilityImplemented
OBJECT-TYPE
This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default value of this attribute is FALSE.
1.3.6.1.4.1.14179.2.3.1.3INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11MultiDomainCapabilityEnabled
OBJECT-TYPE
This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE.
1.3.6.1.4.1.14179.2.3.1.4INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11CountryIndex
OBJECT-TYPE
This attribute identifies the country in which the station is operating.
1.3.6.1.4.1.14179.2.3.1.5INTEGER {usa(1), canada(2), france(3), japan(4), mexico(5), spain(6), usalegacy(7), korearepublic(8), australia(9), austria(10), belgium(11), denmark(12), finland(13), germany(14), greece(15), ireland(16), italy(17), luxembourg(18), netherlands(19), portugal(20), sweden(21), unitedkingdom(22), none(23), india(24), hongkong(25), switzerland(26), iceland(27), norway(28), singapore(29), thailand(30), taiwan(31), cyprus(33), czechrepublic(34), estonia(35), hungary(36), lithuania(37), latvia(38), malaysia(39), newzealand(40), poland(41), slovenia(42), slovakrepublic(43), southafrica(44), usachan165(45), israel(46), israelOutdoor(47), argentina(48), brazil(49), saudiArabia(51), turkey(52), indonesia(53), china(54), koreaExtended(55), japan2(56), gibraltar(57), liechtenstein(58), malta(59), monaco(60), romania(61), russianfederation(62), chile(63), colombia(64), panama(65), peru(66), venezuela(67), philippines(68)}read-writedeprecated
bsnGlobalDot11LoadBalancing
OBJECT-TYPE
This attribute specifies if load balancing of clients is enabled on disabled. Global configuration of Load Balancing is now removed. Use cLWlanLoadBalancingEnable to configure it per WLAN.
1.3.6.1.4.1.14179.2.3.1.6INTEGER {disable(0), enable(1)}read-writedeprecated
bsnGlobalDot11RogueTimer
OBJECT-TYPE
This attribute specifies in seconds, the time interval after which a Rogue Entry in Rogue Table will expire if no beacon is heard from a Rogue.
1.3.6.1.4.1.14179.2.3.1.7Integer32 (120..3600)read-writecurrent
bsnPrimaryMwarForAPs
OBJECT-TYPE
This attribute specifies if this Switch acts a Master Switch for the Airespace APs. So if an Airespace AP doesn't find its Primary Switch, it will associate with this Switch.
1.3.6.1.4.1.14179.2.3.1.8INTEGER {disable(0), enable(1)}read-writecurrent
bsnRtpProtocolPriority
OBJECT-TYPE
Real Time Protocol Priority.
1.3.6.1.4.1.14179.2.3.1.9INTEGER {nopriority(0), highpriority(1)}read-writecurrent
bsnSystemCurrentTime
OBJECT-TYPE
This attribute will display the Current System time on the Switch.
1.3.6.1.4.1.14179.2.3.1.10DisplayStringread-onlycurrent
bsnUpdateSystemTime
OBJECT-TYPE
Use this attribute to change the System time on the Switch. Specify the new time in this Format MM/DD/YYYY HH:MM:SS
1.3.6.1.4.1.14179.2.3.1.11DisplayString (SIZE(0..32))read-writecurrent
bsnOperatingTemperatureEnvironment
OBJECT-TYPE
Operating Environment of the Airespace Switch. commercial is Commercial (0 to 40 C) and industrial is Industrial (-10 to 70 C)
1.3.6.1.4.1.14179.2.3.1.12INTEGER {unknown(0), commercial(1), industrial(2)}read-onlycurrent
bsnSensorTemperature
OBJECT-TYPE
Current Internal Temperature of the unit in Centigrade
1.3.6.1.4.1.14179.2.3.1.13Integer32read-onlycurrent
bsnTemperatureAlarmLowLimit
OBJECT-TYPE
Internal Temperature Alarm Low Limit in Centigrade. If the bsnSensorTemperature goes below this limit bsnSensedTemperatureTooLow Alarm will be sent out
1.3.6.1.4.1.14179.2.3.1.14Integer32read-onlycurrent
bsnTemperatureAlarmHighLimit
OBJECT-TYPE
Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHigh Alarm will be sent out
1.3.6.1.4.1.14179.2.3.1.15Integer32read-onlycurrent
bsnVirtualGatewayAddress
OBJECT-TYPE
Virtual Gateway Address of the Switch. This is used by web auth and Ipsec. If the virtual IP Address is changed, the Switch has to be rebooted for the new Address to take effect. This is now replaced by the Virtual Interface in bsnswitching MIB.
1.3.6.1.4.1.14179.2.3.1.16IpAddressread-writecurrent
bsnRFMobilityDomainName
OBJECT-TYPE
RF Mobility Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Group as well as a Mobility Group. RF Groups does the channel and power management of AP while Mobility Group does load balancing and hand off for clients.
1.3.6.1.4.1.14179.2.3.1.17OCTET STRING (SIZE(0..32))read-writecurrent
bsnClientWatchListFeature
OBJECT-TYPE
This flag should be turned on for the client watch lists to be enabled on the switch. When enabled, the switch generates Client Association and Authentication traps for the watchlisted clients.
1.3.6.1.4.1.14179.2.3.1.18INTEGER {disable(0), enable(1)}read-writecurrent
bsnRogueLocationDiscoveryProtocol
OBJECT-TYPE
This flag should be turned on to enable the Rogue Location Discovery Protocol feature on the switch. We can either enable this feature for all the APs or only for APs in monitor mode.
1.3.6.1.4.1.14179.2.3.1.19INTEGER {disable(0), allAPs(1), monitorAPOnly(2)}read-writecurrent
bsnRogueAutoContainFeature
OBJECT-TYPE
This flag should be turned on to allow the switch to contain the rogues automatically if detected on the wired network.
1.3.6.1.4.1.14179.2.3.1.20INTEGER {disable(0), enable(1)}read-writecurrent
bsnOverAirProvisionApMode
OBJECT-TYPE
Over the Air Provisioning Mode for APs
1.3.6.1.4.1.14179.2.3.1.21INTEGER {disable(0), enable(1)}read-writecurrent
bsnMaximumNumberOfConcurrentLogins
OBJECT-TYPE
This attribute specifies the maximum number of concurrent logins that the switch will allow for a single user. A value 0 implies that there is no restriction on the number of concurrent logins with a single username.
1.3.6.1.4.1.14179.2.3.1.22Integer32 (0..8)read-writecurrent
bsnAutoContainRoguesAdvertisingSsid
OBJECT-TYPE
This flag should be set to 1 to allow the switch to contain automatically those rogues that are advertising our SSID. If value is 0, only an alarm will be generated when such a rogue is detected.
1.3.6.1.4.1.14179.2.3.1.23INTEGER {alarmOnly(0), contain(1)}read-writecurrent
bsnAutoContainAdhocNetworks
OBJECT-TYPE
This flag should be set to 1 to allow the switch to contain automatically the adhoc networks detected by the switch. If value is 0, only an alarm will be generated when such a network is detected.
1.3.6.1.4.1.14179.2.3.1.24INTEGER {alarmOnly(0), contain(1)}read-writecurrent
bsnAutoContainTrustedClientsOnRogueAps
OBJECT-TYPE
This flag should be set to 1 to allow the switch to contain automatically those trusted clients that are associated to rogue APs. If value is 0, only an alarm will be generated when such a client is detected.
1.3.6.1.4.1.14179.2.3.1.25INTEGER {alarmOnly(0), contain(1)}read-writecurrent
bsnValidateRogueClientsAgainstAAA
OBJECT-TYPE
This flag should be turned on to allow the switch to validate 'valid' mobiles associating with rogue APs. For example, if a client's MAC Address is found in the local MAC filter table, that client can be validated.
1.3.6.1.4.1.14179.2.3.1.26INTEGER {disable(0), enable(1)}read-writecurrent
bsnSystemTimezoneDelta
OBJECT-TYPE
The delta (difference) between the local time and the Universal Coordinated Time in hours. For example, it is -8 for the PST and +1 for France. If the delta is -5.30 then this attribute will store -5 and bsnSystemTimezoneDeltaMinutes will store 30. This value i should be between -23 to +23
1.3.6.1.4.1.14179.2.3.1.27Integer32read-writecurrent
bsnSystemTimezoneDaylightSavings
OBJECT-TYPE
This flag specifies if daylight savings are enabled for the current timezone.
1.3.6.1.4.1.14179.2.3.1.28INTEGER {disable(0), enable(1)}read-writeobsolete
bsnAllowAuthorizeApAgainstAAA
OBJECT-TYPE
This flag specifies if LWAPP is allowed to get authorization via RADIUS or local database for an AP.
1.3.6.1.4.1.14179.2.3.1.29INTEGER {disable(0), enable(1)}read-writecurrent
bsnSystemTimezoneDeltaMinutes
OBJECT-TYPE
The minutes component of delta (difference) between the local time and the Universal Coordinated Time.
1.3.6.1.4.1.14179.2.3.1.30Integer32read-writecurrent
bsnApFallbackEnabled
OBJECT-TYPE
This flag specifies if the APs should continue LWAPP discoveries to fallback to the primary switch in case they are not already associated with it i.e they are associated with their respective secondary or tertiary switch instead.
1.3.6.1.4.1.14179.2.3.1.31INTEGER {disable(0), enable(1)}read-writecurrent
bsnAppleTalkEnabled
OBJECT-TYPE
This flag turns on the appletalk bridging in the switch such that the packets from Apple clients that use appletalk format can be processed by the switch. When this flag is off, these packets are dropped.
1.3.6.1.4.1.14179.2.3.1.32INTEGER {disable(0), enable(1)}read-writecurrent
bsnTrustedApPolicyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.40
bsnPolicyForMisconfiguredAps
OBJECT-TYPE
This flag should be turned on to allow the switch to contain misconfigured APs.
1.3.6.1.4.1.14179.2.3.1.40.1INTEGER {alarmOnly(0), contain(1)}read-writecurrent
bsnEncryptionPolicyEnforced
OBJECT-TYPE
The encryption policy that is enforced on the trusted APs.
1.3.6.1.4.1.14179.2.3.1.40.2INTEGER {none(0), open(1), wep(2), wpa(3)}read-writecurrent
bsnPreamblePolicyEnforced
OBJECT-TYPE
The preamble policy that is enforced on the trusted APs.
1.3.6.1.4.1.14179.2.3.1.40.3INTEGER {none(0), short(1), long(2)}read-writecurrent
bsnDot11ModePolicyEnforced
OBJECT-TYPE
The 802.11 Mode policy that is enforced on the trusted APs.
1.3.6.1.4.1.14179.2.3.1.40.4INTEGER {none(0), dcfOnly(1), pcfOnly(2)}read-writecurrent
bsnRadioTypePolicyEnforced
OBJECT-TYPE
The radio type policy that is enforced on the trusted APs.
1.3.6.1.4.1.14179.2.3.1.40.5INTEGER {none(0), aOnly(1), bOnly(2), bgOnly(3)}read-writecurrent
bsnValidateSsidForTrustedAp
OBJECT-TYPE
If enabled, the SSID of trusted APs will be validated by the switch.
1.3.6.1.4.1.14179.2.3.1.40.6INTEGER {disable(0), enable(1)}read-writecurrent
bsnAlertIfTrustedApMissing
OBJECT-TYPE
If enabled, an alert will be generated when a trusted AP is missing.
1.3.6.1.4.1.14179.2.3.1.40.7INTEGER {disable(0), enable(1)}read-writecurrent
bsnTrustedApEntryExpirationTimeout
OBJECT-TYPE
This attribute specifies in seconds, the time interval after which a Trusted AP Entry will expire if no beacon is heard from that AP.
1.3.6.1.4.1.14179.2.3.1.40.8Integer32 (120..3600)read-writecurrent
bsnClientExclusionPolicyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.41
bsnExcessive80211AssocFailures
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated 802.11 Association Failures occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnExcessive80211AuthFailures
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated 802.11 Authentication Failures occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.2INTEGER {disable(0), enable(1)}read-writecurrent
bsnExcessive8021xAuthFailures
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated 802.1x Authentication Failures occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.3INTEGER {disable(0), enable(1)}read-writecurrent
bsnExternalPolicyServerFailures
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated external policy server failures occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.4INTEGER {disable(0), enable(1)}read-writecurrent
bsnExcessiveWebAuthFailures
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated Web Authentication Failures occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.5INTEGER {disable(0), enable(1)}read-writecurrent
bsnIPTheftORReuse
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if it appears to be reusing an IP Address.(Possible IP Theft)
1.3.6.1.4.1.14179.2.3.1.41.6INTEGER {disable(0), enable(1)}read-writecurrent
bsnExcessive8021xTimeout
OBJECT-TYPE
This flag specifies if client should be excluded (exclusion list) if repeated 802.1x Timeout occurs with a client.
1.3.6.1.4.1.14179.2.3.1.41.7INTEGER {disable(0), enable(1)}read-writecurrent
bsnSignatureConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.42
bsnStandardSignatureTable
OBJECT-TYPE
The table listing Standard Signatures configured on the switch. The standard signatures are provided with the released product. The standard signatures can be updated via file download to the switch. The table is indexed by the precedence of the signatures.
1.3.6.1.4.1.14179.2.3.1.42.1not-accessiblecurrent
bsnStandardSignatureEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.3.1.42.1.1not-accessiblecurrent
bsnStandardSignaturePrecedence
OBJECT-TYPE
Precedence of the signature. This specifies the order in which the signature is applied to a packet.
1.3.6.1.4.1.14179.2.3.1.42.1.1.1Unsigned32 (1..100)read-onlycurrent
bsnStandardSignatureName
OBJECT-TYPE
This attribute is used to configure the name on a signature.
1.3.6.1.4.1.14179.2.3.1.42.1.1.2DisplayString (SIZE(0..20))read-onlycurrent
bsnStandardSignatureDescription
OBJECT-TYPE
This attribute is used to configure the description of a signature.
1.3.6.1.4.1.14179.2.3.1.42.1.1.3DisplayString (SIZE(0..100))read-onlycurrent
bsnStandardSignatureFrameType
OBJECT-TYPE
This attribute specifies the type of frame that needs to match a signature.
1.3.6.1.4.1.14179.2.3.1.42.1.1.4INTEGER {management(0), data(1)}read-onlycurrent
bsnStandardSignatureAction
OBJECT-TYPE
This attribute specifies the action to be taken once a packet is found to match a signature.
1.3.6.1.4.1.14179.2.3.1.42.1.1.5INTEGER {none(0), report(1), contain(2), exclude(3)}read-onlycurrent
bsnStandardSignatureState
OBJECT-TYPE
This attribute specifies the state of a signature. It is used to match packets only if the state is enabled.
1.3.6.1.4.1.14179.2.3.1.42.1.1.6INTEGER {disabled(0), enabled(1)}read-onlycurrent
bsnStandardSignatureFrequency
OBJECT-TYPE
This specifies the frequency of the matching packets after which the specified action is taken.
1.3.6.1.4.1.14179.2.3.1.42.1.1.7Unsigned32 (0..65535)read-writecurrent
bsnStandardSignatureQuietTime
OBJECT-TYPE
This specifies the quiet time in seconds during which no matching packets are found after which the attack is considered stopped.
1.3.6.1.4.1.14179.2.3.1.42.1.1.8Unsigned32 (0..65535)read-writecurrent
bsnStandardSignatureVersion
OBJECT-TYPE
This specifies the signature version.
1.3.6.1.4.1.14179.2.3.1.42.1.1.9Unsigned32 (0..128)read-onlycurrent
bsnStandardSignatureConfigType
OBJECT-TYPE
This attribute specifies the type of Signature configuration. It's protocol when the protocol format is used in the UI to configure this. Pattern is the config type for all signatures in the released signature file and when signatures are configured using pattern format. Note: the signatures will be allowed to be i configured in later releases.
1.3.6.1.4.1.14179.2.3.1.42.1.1.10INTEGER {pattern(0), protocol(1)}read-onlycurrent
bsnStandardSignatureEnable
OBJECT-TYPE
This object configures the status of a particular standard signature on LWAPP APs, for use in performing signature analysis on the received 802.11 data and/or management frames. A value of 'true' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'enable'. This makes the joined APs perform signature analysis on the received 802.11 data and/or management frames and report the discrepancies observed, if any, to the Controller. A value of 'false' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'disable'. The joined APs doesn't perform the signature analysis on the received 802.11 data and/or management frames for this particular signature, till the signature is enabled.
1.3.6.1.4.1.14179.2.3.1.42.1.1.11TruthValueread-writecurrent
bsnStandardSignatureMacInfo
OBJECT-TYPE
This object defines the pattern followed by the LWAPP APs to perform signature analysis with this Standard signature and report the results to the Controller.
1.3.6.1.4.1.14179.2.3.1.42.1.1.12BsnTxtSignatureMacInforead-onlycurrent
bsnStandardSignatureMacFreq
OBJECT-TYPE
This object specifies the frequency of matching packets from a particular source after which the specified action is taken.
1.3.6.1.4.1.14179.2.3.1.42.1.1.13Unsigned32 (0..65535)read-writecurrent
bsnStandardSignatureRowStatus
OBJECT-TYPE
Row Status for creation/deletion. Signature will allowed to be created, deleted and edited in later releases.
1.3.6.1.4.1.14179.2.3.1.42.1.1.20RowStatusread-onlycurrent
bsnStandardSignatureInterval
OBJECT-TYPE
Interval of the signature. This specifies the interval when the signature is applied to a packet.
1.3.6.1.4.1.14179.2.3.1.42.1.1.21Unsigned32 (1..3600)read-writecurrent
bsnStandardSignaturePatternTable
OBJECT-TYPE
The table listing the matching patterns specified for a i Standard Signature. These are instrumental in matching the signature with a packet. A maximum of 5 i patterns may be specifed for a signature. These are used for matching in the order of their index.
1.3.6.1.4.1.14179.2.3.1.42.2not-accessiblecurrent
bsnStandardSignaturePatternEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.3.1.42.2.1not-accessiblecurrent
bsnStandardSignaturePatternIndex
OBJECT-TYPE
Index of the pattern. This specifies the order in which the pattern is checked against the packet contents.
1.3.6.1.4.1.14179.2.3.1.42.2.1.1Unsigned32 (1..5)read-onlycurrent
bsnStandardSignaturePatternOffset
OBJECT-TYPE
Offset from the start of the packet where the AP looks for a match to the pattern.
1.3.6.1.4.1.14179.2.3.1.42.2.1.2Unsigned32 (0..128)read-onlycurrent
bsnStandardSignaturePatternString
OBJECT-TYPE
This is the pattern string that the AP uses to match at the offset. Example: 0x616c7068615f3178
1.3.6.1.4.1.14179.2.3.1.42.2.1.3DisplayString (SIZE(0..62))read-onlycurrent
bsnStandardSignaturePatternMask
OBJECT-TYPE
This is the pattern mask. This is the bit mask that the AP uses to mask out the bits in the packet at the given offset. Example: 0xffffffffffffffff
1.3.6.1.4.1.14179.2.3.1.42.2.1.4DisplayString (SIZE(0..62))read-onlycurrent
bsnStandardSignaturePatternOffSetStart
OBJECT-TYPE
This object indicates how an offset should be applied while doing signature analysis for QOS and non-QOS data frames with this standard signature.
1.3.6.1.4.1.14179.2.3.1.42.2.1.5BsnSignaturePatternOffSetStartread-onlycurrent
bsnStandardSignaturePatternRowStatus
OBJECT-TYPE
Row Status for creation/deletion. Signature Pattern will allowed to be created, deleted and edited in later releases.
1.3.6.1.4.1.14179.2.3.1.42.2.1.15RowStatusread-onlycurrent
bsnCustomSignatureTable
OBJECT-TYPE
The table listing Standard Signatures configured on the switch. The standard signatures are provided with the released product. The standard signatures can be updated via file download to the switch. The table is indexed by the precedence of the signatures.
1.3.6.1.4.1.14179.2.3.1.42.3not-accessiblecurrent
bsnCustomSignatureEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.3.1.42.3.1not-accessiblecurrent
bsnCustomSignaturePrecedence
OBJECT-TYPE
Precedence of the signature. This specifies the order in which the signature is applied to a packet.
1.3.6.1.4.1.14179.2.3.1.42.3.1.1Unsigned32 (1..100)read-onlycurrent
bsnCustomSignatureName
OBJECT-TYPE
This attribute is used to configure the name on a signature.
1.3.6.1.4.1.14179.2.3.1.42.3.1.2DisplayString (SIZE(0..20))read-onlycurrent
bsnCustomSignatureDescription
OBJECT-TYPE
This attribute is used to configure the description of a signature.
1.3.6.1.4.1.14179.2.3.1.42.3.1.3DisplayString (SIZE(0..100))read-onlycurrent
bsnCustomSignatureFrameType
OBJECT-TYPE
This attribute specifies the type of frame that needs to match a signature.
1.3.6.1.4.1.14179.2.3.1.42.3.1.4INTEGER {management(0), data(1)}read-onlycurrent
bsnCustomSignatureAction
OBJECT-TYPE
This attribute specifies the action to be taken once a packet is found to match a signature.
1.3.6.1.4.1.14179.2.3.1.42.3.1.5INTEGER {none(0), report(1), contain(2), exclude(3)}read-onlycurrent
bsnCustomSignatureState
OBJECT-TYPE
This attribute specifies the state of a signature. It is used to match packets only if the state is enabled.
1.3.6.1.4.1.14179.2.3.1.42.3.1.6INTEGER {disabled(0), enabled(1)}read-onlycurrent
bsnCustomSignatureFrequency
OBJECT-TYPE
This specifies the frequency of the matching packets after which the specified action is taken.
1.3.6.1.4.1.14179.2.3.1.42.3.1.7Unsigned32 (0..65535)read-writecurrent
bsnCustomSignatureQuietTime
OBJECT-TYPE
This specifies the quiet time in seconds during which no matching packets are found after which the attack is considered stopped.
1.3.6.1.4.1.14179.2.3.1.42.3.1.8Unsigned32 (0..65535)read-writecurrent
bsnCustomSignatureVersion
OBJECT-TYPE
This specifies the signature version.
1.3.6.1.4.1.14179.2.3.1.42.3.1.9Unsigned32 (0..128)read-onlycurrent
bsnCustomSignatureConfigType
OBJECT-TYPE
This attribute specifies the type of Signature configuration. It's protocol when the protocol format is used in the UI to configure this. Pattern is the config type for all signatures in the released signature file and when signatures are configured using pattern format. Note: the signatures will be allowed to be configured in later releases.
1.3.6.1.4.1.14179.2.3.1.42.3.1.10INTEGER {pattern(0), protocol(1)}read-onlycurrent
bsnCustomSignatureEnable
OBJECT-TYPE
This object configures the status of a particular Custom signature on LWAPP APs, for use in performing signature analysis on the received 802.11 data and/or management frames. A value of 'true' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'enable'. This makes the joined APs perform signature analysis on the received 802.11 data and/or management frames and report the discrepancies observed, if any, to the Controller. A value of 'false' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'disable'. The joined APs doesn't perform the signature analysis on the received 802.11 data and/or management frames for this particular signature, till the signature is enabled.
1.3.6.1.4.1.14179.2.3.1.42.3.1.11TruthValueread-writecurrent
bsnCustomSignatureMacInfo
OBJECT-TYPE
This object defines the pattern followed by the LWAPP APs to perform signature analysis with this Custom signature and report the results to the Controller.
1.3.6.1.4.1.14179.2.3.1.42.3.1.12BsnTxtSignatureMacInforead-onlycurrent
bsnCustomSignatureMacFreq
OBJECT-TYPE
This object specifies the frequency of matching packets from a particular source after which the specified action is taken.
1.3.6.1.4.1.14179.2.3.1.42.3.1.13Unsigned32 (0..65535)read-writecurrent
bsnCustomSignatureRowStatus
OBJECT-TYPE
Row Status for creation/deletion. Signature will allowed to be created, deleted and edited in later releases.
1.3.6.1.4.1.14179.2.3.1.42.3.1.20RowStatusread-onlycurrent
bsnCustomSignatureInterval
OBJECT-TYPE
Interval of the signature. This specifies the interval when the signature is applied to a packet.
1.3.6.1.4.1.14179.2.3.1.42.3.1.21Unsigned32 (1..3600)read-writecurrent
bsnCustomSignaturePatternTable
OBJECT-TYPE
The table listing the matching patterns specified for a Standard Signature. These are instrumental in matching the signature with a packet. A maximum of 5 patterns may be specifed for a signature. These are used for matching in the order of their index.
1.3.6.1.4.1.14179.2.3.1.42.4not-accessiblecurrent
bsnCustomSignaturePatternEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.3.1.42.4.1not-accessiblecurrent
bsnCustomSignaturePatternIndex
OBJECT-TYPE
Index of the pattern. This specifies the order in which the pattern is checked against the packet contents.
1.3.6.1.4.1.14179.2.3.1.42.4.1.1Unsigned32 (1..5)read-onlycurrent
bsnCustomSignaturePatternOffset
OBJECT-TYPE
Offset from the start of the packet where the AP looks for a match to the pattern.
1.3.6.1.4.1.14179.2.3.1.42.4.1.2Unsigned32 (0..128)read-onlycurrent
bsnCustomSignaturePatternString
OBJECT-TYPE
This is the pattern string that the AP uses to match at the offset. Example: 0x616c7068615f3178
1.3.6.1.4.1.14179.2.3.1.42.4.1.3DisplayString (SIZE(0..62))read-onlycurrent
bsnCustomSignaturePatternMask
OBJECT-TYPE
This is the pattern mask. This is the bit mask that the AP uses to mask out the bits in the packet at the given offset. Example: 0xffffffffffffffff
1.3.6.1.4.1.14179.2.3.1.42.4.1.4DisplayString (SIZE(0..62))read-onlycurrent
bsnCustomSignaturePatternOffSetStart
OBJECT-TYPE
This object indicates how an offset should be applied while doing signature analysis for QOS and non-QOS data frames with this custom signature.
1.3.6.1.4.1.14179.2.3.1.42.4.1.5BsnSignaturePatternOffSetStartread-onlycurrent
bsnCustomSignaturePatternRowStatus
OBJECT-TYPE
Row Status for creation/deletion. Signature Pattern will allowed to be created, deleted and edited in later releases.
1.3.6.1.4.1.14179.2.3.1.42.4.1.15RowStatusread-onlycurrent
bsnSignatureCheckState
OBJECT-TYPE
This flag should be enabled to enforce check of all standard and custom signatures. If disabled, there will be no check for signatures, both custom and standard, by the switch.
1.3.6.1.4.1.14179.2.3.1.42.5INTEGER {disable(0), enable(1)}read-writecurrent
bsnRfIdTagConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.43
bsnRfIdTagStatus
OBJECT-TYPE
This flag should be turned on to allow the switch to collect data for tags.
1.3.6.1.4.1.14179.2.3.1.43.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnRfIdTagDataTimeout
OBJECT-TYPE
This is the number of seconds after which the tag data is deleted by the switch from its database if it didn't hear from the tag again.
1.3.6.1.4.1.14179.2.3.1.43.2Unsigned32 (60..7200)read-writecurrent
bsnRfIdTagAutoTimeoutStatus
OBJECT-TYPE
This flag should be turned on to allow auto deletion of tag data in the switch after expiration of Tag Data Timeout
1.3.6.1.4.1.14179.2.3.1.43.3INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPNeighborAuthConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.44
bsnAPNeighborAuthStatus
OBJECT-TYPE
This flag should be turned on to allow the AP-Neighbor Authentication feature.
1.3.6.1.4.1.14179.2.3.1.44.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPNeighborAuthAlarmThreshold
OBJECT-TYPE
Authentication alarm trigger threshold.
1.3.6.1.4.1.14179.2.3.1.44.2INTEGER (1..255)read-writecurrent
bsnRFNetworkName
OBJECT-TYPE
RF Network Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Network Group as well as a Mobility Group. RF Network Groups does the channel and power management of AP while Mobility Group does load balancing and hand off for clients.
1.3.6.1.4.1.14179.2.3.1.45OCTET STRING (SIZE(0..19))read-writecurrent
bsnFastSSIDChangeFeature
OBJECT-TYPE
Configures Fast SSID changing feature for mobile-stations. When enabled, permits mobile-stations to change SSIDs without having to block and wait for SSID-cleanup on the switch to occur.
1.3.6.1.4.1.14179.2.3.1.46INTEGER {disable(0), enable(1)}read-writecurrent
bsnBridgingPolicyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.1.47
bsnBridgingZeroTouchConfig
OBJECT-TYPE
If enabled, allows new bridging APs to negotiate with the switch to acquire the shared secret key.
1.3.6.1.4.1.14179.2.3.1.47.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnBridgingSharedSecretKey
OBJECT-TYPE
Key that is used to negotiate a secure LWAPP connection between a switch and a bridging or mesh AP.
1.3.6.1.4.1.14179.2.3.1.47.2OCTET STRING (SIZE(0..32))read-writecurrent
bsnAcceptSelfSignedCertificate
OBJECT-TYPE
This flag specifies if controller will accept Self Signed Certificate from AP as part of authorization.
1.3.6.1.4.1.14179.2.3.1.48INTEGER {disable(0), enable(1)}read-writecurrent
bsnSystemClockTime
OBJECT-TYPE
This object represents the current clock time of the controller and expressed as the number of seconds elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC).
1.3.6.1.4.1.14179.2.3.1.49Unsigned32read-onlycurrent
bsnGlobalDot11b
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.2
bsnGlobalDot11bConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.2.1
bsnGlobalDot11bNetworkStatus
OBJECT-TYPE
802.11b Network Admin Status.
1.3.6.1.4.1.14179.2.3.2.1.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bBeaconPeriod
OBJECT-TYPE
This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.
1.3.6.1.4.1.14179.2.3.2.1.2INTEGER (20..1000)read-writecurrent
bsnGlobalDot11bDynamicChannelAssignment
OBJECT-TYPE
Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for all Airespace APs that permit this operation. When the DCA is runOnce, channel assignments are updated based on the UPDATE_CMD received from the management. When the DCA is static, no dynamic channel assignments occurs and value are set to their global default. Default is auto.
1.3.6.1.4.1.14179.2.3.2.1.3INTEGER {automatic(1), runOnce(2), static(3)}read-writecurrent
bsnGlobalDot11bCurrentChannel
OBJECT-TYPE
The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2. This attribute will be read-only if bsnAPIfPhyChannelAutomaticOn is true.
1.3.6.1.4.1.14179.2.3.2.1.4INTEGER (1..14)read-writecurrent
bsnGlobalDot11bDynamicChannelUpdateInterval
OBJECT-TYPE
When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs
1.3.6.1.4.1.14179.2.3.2.1.5Unsigned32read-onlycurrent
bsnGlobalDot11bInputsForDCA
OBJECT-TYPE
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options bit -------------------------------------- none 0 SIGNAL STRENGTH 1 NOISE 2 FOREIGN INTERFERENCE 4 LOAD 8 DEVICE INTERFERENCE 32 Default value is 63( all bits on).
1.3.6.1.4.1.14179.2.3.2.1.6Unsigned32read-writecurrent
bsnGlobalDot11bChannelUpdateCmdInvoke
OBJECT-TYPE
When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airespace Switch which is not a Group leader has no effect.
1.3.6.1.4.1.14179.2.3.2.1.7INTEGER {default(0), activate(1)}read-writecurrent
bsnGlobalDot11bChannelUpdateCmdStatus
OBJECT-TYPE
After setting bsnGlobalDot11bChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
1.3.6.1.4.1.14179.2.3.2.1.8Integer32read-onlycurrent
bsnGlobalDot11bDynamicTransmitPowerControl
OBJECT-TYPE
Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically updated for all Airespace APs that permit this operation. When the DTP is runOnce,transmit power update will occur based on the UPDATE_CMD received from the management. When the DTP is static, no dynamic transmit power updates occur and their global defaults are used. Default is auto.
1.3.6.1.4.1.14179.2.3.2.1.9INTEGER {automatic(1), runOnce(2), static(3)}read-writecurrent
bsnGlobalDot11bDynamicTxPowerControlInterval
OBJECT-TYPE
When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempted on an Airespace AP. NOTE: hysteresis is build into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs
1.3.6.1.4.1.14179.2.3.2.1.10Unsigned32read-onlycurrent
bsnGlobalDot11bCurrentTxPowerLevel
OBJECT-TYPE
The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA.
1.3.6.1.4.1.14179.2.3.2.1.11INTEGER (0..5)read-writecurrent
bsnGlobalDot11bInputsForDTP
OBJECT-TYPE
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options bit -------------------------------------- none 0 LOAD 1 SIGNAL STRENGTH 2 FOREIGN INTERFERENCE 4 NOISE 8 Default value is 15( all bits on).
1.3.6.1.4.1.14179.2.3.2.1.12Unsigned32read-writecurrent
bsnGlobalDot11bPowerUpdateCmdInvoke
OBJECT-TYPE
When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airespace Switch which is not a Group leader has no effect.
1.3.6.1.4.1.14179.2.3.2.1.13INTEGER {default(0), activate(1)}read-writecurrent
bsnGlobalDot11bPowerUpdateCmdStatus
OBJECT-TYPE
After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
1.3.6.1.4.1.14179.2.3.2.1.14Integer32read-onlycurrent
bsnGlobalDot11bDataRate1Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.2.1.15INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate2Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.2.1.16INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate5AndHalfMhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.2.1.17INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate11Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.2.1.18INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bShortPreamble
OBJECT-TYPE
802.11b Short Preamble.
1.3.6.1.4.1.14179.2.3.2.1.19INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bDot11gSupport
OBJECT-TYPE
This attribute is enabled to also support 802.11g protocol on the 802.11b network. Enabling 802.11g allows additional data rates: 6, 9, 12, 18, 24, 36, 48, 54 Mbps.
1.3.6.1.4.1.14179.2.3.2.1.20INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bDataRate6Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.21INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate9Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.22INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate12Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.23INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate18Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.24INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate24Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.25INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate36Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.26INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate48Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.27INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bDataRate54Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
1.3.6.1.4.1.14179.2.3.2.1.28INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11bPicoCellMode
OBJECT-TYPE
Configures the 802.11b pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled.
1.3.6.1.4.1.14179.2.3.2.1.29INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bFastRoamingMode
OBJECT-TYPE
Configures the 802.11b fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled.
1.3.6.1.4.1.14179.2.3.2.1.30INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bFastRoamingVoipMinRate
OBJECT-TYPE
Configures the minimum transmission rate allowed for VoIP on any 802.11b radio.
1.3.6.1.4.1.14179.2.3.2.1.31INTEGER {undefined(0), rate1Mbps(1), rate2Mbps(2), rate5andHalfMbps(3), rate11Mbps(4)}read-writecurrent
bsnGlobalDot11bFastRoamingVoipPercentage
OBJECT-TYPE
Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP.
1.3.6.1.4.1.14179.2.3.2.1.32INTEGER {zero(1), twentyfive(2), fifty(3), seventyfive(4), hundred(5)}read-writecurrent
bsnGlobalDot11b80211eMaxBandwidth
OBJECT-TYPE
This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11b network. The value of this attribute can vary from 0 to 100.
1.3.6.1.4.1.14179.2.3.2.1.33INTEGER (0..100)read-writecurrent
bsnGlobalDot11bDTPCSupport
OBJECT-TYPE
This attribute may be used to enable the DTPC support on all 802.11b/g radios. DTPC or Dynamic Transmit Power Control support means that the radio's transmit power will be advertised in the beacons and probe responses.
1.3.6.1.4.1.14179.2.3.2.1.34INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11bRxSopThreshold
OBJECT-TYPE
This attribute may be used to configure Rxsop or receiver start of packet custom values for 802.11b/g radios.
1.3.6.1.4.1.14179.2.3.2.1.35INTEGER {auto(0), low(1), medium(2), high(3), custom(4)}read-writecurrent
bsnGlobalDot11bPhy
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.2.2
bsnGlobalDot11bMediumOccupancyLimit
OBJECT-TYPE
This attribute shall indicate the maximum amount of time, in TU, that a point coordinator may control the usage of the wireless medium without relinquishing control for long enough to allow at least one instance of DCF access to the medium. The default value of this attribute shall be 100, and the maximum value shall be 1000.
1.3.6.1.4.1.14179.2.3.2.2.1INTEGER (0..1000)read-onlycurrent
bsnGlobalDot11bCFPPeriod
OBJECT-TYPE
The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.3.2.2.2INTEGER (0..255)read-onlycurrent
bsnGlobalDot11bCFPMaxDuration
OBJECT-TYPE
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.3.2.2.3INTEGER (0..65535)read-onlycurrent
bsnGlobalDot11bCFPollable
OBJECT-TYPE
When this attribute is true, it shall indicate that the STA is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the STA is not able to respond to a CF-Poll with a data frame within a SIFS time.
1.3.6.1.4.1.14179.2.3.2.2.5INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11bCFPollRequest
OBJECT-TYPE
Specifies wheather CFP
1.3.6.1.4.1.14179.2.3.2.2.6INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11bDTIMPeriod
OBJECT-TYPE
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
1.3.6.1.4.1.14179.2.3.2.2.7INTEGER (1..255)read-writecurrent
bsnGlobalDot11bMaximumTransmitPowerLevel
OBJECT-TYPE
This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.2.2.8Integer32read-onlydeprecated
bsnGlobalDot11bFirstChannelNumber
OBJECT-TYPE
This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.2.2.9Integer32read-onlydeprecated
bsnGlobalDot11bNumberofChannels
OBJECT-TYPE
This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.2.2.10Integer32read-onlydeprecated
bsnGlobalDot11bRTSThreshold
OBJECT-TYPE
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
1.3.6.1.4.1.14179.2.3.2.2.11INTEGER (0..2347)read-onlycurrent
bsnGlobalDot11bShortRetryLimit
OBJECT-TYPE
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to bsnGlobalDot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7.
1.3.6.1.4.1.14179.2.3.2.2.12INTEGER (1..255)read-onlycurrent
bsnGlobalDot11bLongRetryLimit
OBJECT-TYPE
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than bsnGlobalDot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 4.
1.3.6.1.4.1.14179.2.3.2.2.13INTEGER (1..255)read-onlycurrent
bsnGlobalDot11bFragmentationThreshold
OBJECT-TYPE
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
1.3.6.1.4.1.14179.2.3.2.2.14INTEGER (256..2346)read-writecurrent
bsnGlobalDot11bMaxTransmitMSDULifetime
OBJECT-TYPE
The MaxTransmitMSDULifetime shall be the elapsed time in TU, after the initial transmission of an MSDU, after which further attempts to transmit the MSDU shall be terminated. The default value of this attribute shall be 512.
1.3.6.1.4.1.14179.2.3.2.2.15Unsigned32 (1..4294967295)read-onlycurrent
bsnGlobalDot11bMaxReceiveLifetime
OBJECT-TYPE
The MaxReceiveLifetime shall be the elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU shall be terminated. The default value shall be 512.
1.3.6.1.4.1.14179.2.3.2.2.16Unsigned32 (1..4294967295)read-onlycurrent
bsnGlobalDot11bEDThreshold
OBJECT-TYPE
The current Energy Detect Threshold being used by the DSSS PHY.
1.3.6.1.4.1.14179.2.3.2.2.17Integer32read-onlycurrent
bsnGlobalDot11bChannelAgilityEnabled
OBJECT-TYPE
This attribute indicates that the PHY channel agility functionality is enabled.
1.3.6.1.4.1.14179.2.3.2.2.18INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11bPBCCOptionImplemented
OBJECT-TYPE
This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute shall be false.
1.3.6.1.4.1.14179.2.3.2.2.19INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11bShortPreambleOptionImplemented
OBJECT-TYPE
This attribute, when true, shall indicate that the short preamble option as defined in subclause 18.2.2.2 is implemented. The default value of this attribute shall be false.
1.3.6.1.4.1.14179.2.3.2.2.20INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11a
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.3
bsnGlobalDot11aConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.3.1
bsnGlobalDot11aNetworkStatus
OBJECT-TYPE
Dot11a Network Status
1.3.6.1.4.1.14179.2.3.3.1.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11aLowBandNetwork
OBJECT-TYPE
Dot11a Low Band Network Status
1.3.6.1.4.1.14179.2.3.3.1.2INTEGER {disable(0), enable(1)}read-onlycurrent
bsnGlobalDot11aMediumBandNetwork
OBJECT-TYPE
Dot11a Mid Band Network Status
1.3.6.1.4.1.14179.2.3.3.1.3INTEGER {disable(0), enable(1)}read-onlycurrent
bsnGlobalDot11aHighBandNetwork
OBJECT-TYPE
Dot11a High Band Network Status
1.3.6.1.4.1.14179.2.3.3.1.4INTEGER {disable(0), enable(1)}read-onlycurrent
bsnGlobalDot11aBeaconPeriod
OBJECT-TYPE
This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.
1.3.6.1.4.1.14179.2.3.3.1.5INTEGER (20..1000)read-writecurrent
bsnGlobalDot11aDynamicChannelAssignment
OBJECT-TYPE
Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for all Airespace APs that permit this operation. When the DCA is runOnce, channel assignments are updated based on the UPDATE_CMD received from the management. When the DCA is static, no dynamic channel assignments occurs and value are set to their global default. Default is auto.
1.3.6.1.4.1.14179.2.3.3.1.6INTEGER {automatic(1), runOnce(2), static(3)}read-writecurrent
bsnGlobalDot11aCurrentChannel
OBJECT-TYPE
The number of the current operating frequency channel of the OFDM PHY.
1.3.6.1.4.1.14179.2.3.3.1.7INTEGER (0..99)read-writecurrent
bsnGlobalDot11aDynamicChannelUpdateInterval
OBJECT-TYPE
When Channel dynamic alogirthm is running, this interval(in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is build into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs
1.3.6.1.4.1.14179.2.3.3.1.8Unsigned32read-onlycurrent
bsnGlobalDot11aInputsForDCA
OBJECT-TYPE
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options bit -------------------------------------- none 0 SIGNAL STRENGTH 1 NOISE 2 FOREIGN INTERFERENCE 4 LOAD 8 DEVICE INTERFERENCE 32 Default value is 63( all bits on).
1.3.6.1.4.1.14179.2.3.3.1.9Unsigned32read-writecurrent
bsnGlobalDot11aChannelUpdateCmdInvoke
OBJECT-TYPE
When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airespace Switch which is not a Group leader has no effect.
1.3.6.1.4.1.14179.2.3.3.1.10INTEGER {default(0), activate(1)}read-writecurrent
bsnGlobalDot11aChannelUpdateCmdStatus
OBJECT-TYPE
After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
1.3.6.1.4.1.14179.2.3.3.1.11Integer32read-onlycurrent
bsnGlobalDot11aDynamicTransmitPowerControl
OBJECT-TYPE
Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically updated for all Airespace APs that permit this operation. When the DTP is runOnce,transmit power update will occur based on the UPDATE_CMD received from the management. When the DTP is static, no dynamic transmit power updates occur and their global defaults are used. Default is auto.
1.3.6.1.4.1.14179.2.3.3.1.12INTEGER {automatic(1), runOnce(2), static(3)}read-writecurrent
bsnGlobalDot11aCurrentTxPowerLevel
OBJECT-TYPE
The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA.
1.3.6.1.4.1.14179.2.3.3.1.13INTEGER (0..5)read-writecurrent
bsnGlobalDot11aDynamicTxPowerControlInterval
OBJECT-TYPE
When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempted on an Airespace AP. NOTE: hysteresis is build into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs
1.3.6.1.4.1.14179.2.3.3.1.14Unsigned32read-onlycurrent
bsnGlobalDot11aInputsForDTP
OBJECT-TYPE
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options bit -------------------------------------- none 0 LOAD 1 SIGNAL STRENGTH 2 FOREIGN INTERFERENCE 4 NOISE 8 Default value is 15( all bits on).
1.3.6.1.4.1.14179.2.3.3.1.15Unsigned32read-writecurrent
bsnGlobalDot11aPowerUpdateCmdInvoke
OBJECT-TYPE
When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airespace Switch which is not a Group leader has no effect.
1.3.6.1.4.1.14179.2.3.3.1.16INTEGER {default(0), activate(1)}read-writecurrent
bsnGlobalDot11aPowerUpdateCmdStatus
OBJECT-TYPE
After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
1.3.6.1.4.1.14179.2.3.3.1.17Integer32read-onlycurrent
bsnGlobalDot11aDataRate6Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.19INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate9Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.20INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate12Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.21INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate18Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.22INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate24Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.23INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate36Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.24INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate48Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.25INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aDataRate54Mhz
OBJECT-TYPE
Specify if this rate is supported or mandatory or disabled
1.3.6.1.4.1.14179.2.3.3.1.26INTEGER {disabled(0), supported(1), mandatory(2)}read-writecurrent
bsnGlobalDot11aPicoCellMode
OBJECT-TYPE
Configures the 802.11a pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled.
1.3.6.1.4.1.14179.2.3.3.1.27INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11aFastRoamingMode
OBJECT-TYPE
Configures the 802.11a fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled.
1.3.6.1.4.1.14179.2.3.3.1.28INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11aFastRoamingVoipMinRate
OBJECT-TYPE
Configures the minimum transmission rate allowed for VoIP on any 802.11a radio.
1.3.6.1.4.1.14179.2.3.3.1.29INTEGER {undefined(0), rate1Mbps(1), rate2Mbps(2), rate5andHalfMbps(3), rate11Mbps(4)}read-writecurrent
bsnGlobalDot11aFastRoamingVoipPercentage
OBJECT-TYPE
Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP.
1.3.6.1.4.1.14179.2.3.3.1.30INTEGER {zero(1), twentyfive(2), fifty(3), seventyfive(4), hundred(5)}read-writecurrent
bsnGlobalDot11a80211eMaxBandwidth
OBJECT-TYPE
This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11a network. The value of this attribute can vary from 0 to 100.
1.3.6.1.4.1.14179.2.3.3.1.31INTEGER (0..100)read-writecurrent
bsnGlobalDot11aDTPCSupport
OBJECT-TYPE
This attribute may be used to enable the DTPC support on all 802.11a radios. DTPC or Dynamic Transmit Power Control support means that the radio's transmit power will be advertised in the beacons and probe responses.
1.3.6.1.4.1.14179.2.3.3.1.32INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11aRxSopThreshold
OBJECT-TYPE
This attribute may be used to configure Rxsop or receiver start of packet custom values for 802.11a radios.
1.3.6.1.4.1.14179.2.3.3.1.33INTEGER {auto(0), low(1), medium(2), high(3), custom(4)}read-writecurrent
bsnGlobalDot11aPhy
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.3.2
bsnGlobalDot11aMediumOccupancyLimit
OBJECT-TYPE
This attribute shall indicate the maximum amount of time, in TU, that a point coordinator may control the usage of the wireless medium without relinquishing control for long enough to allow at least one instance of DCF access to the medium. The default value of this attribute shall be 100, and the maximum value shall be 1000.
1.3.6.1.4.1.14179.2.3.3.2.1INTEGER (0..1000)read-onlycurrent
bsnGlobalDot11aCFPPeriod
OBJECT-TYPE
The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.3.3.2.2INTEGER (0..255)read-onlycurrent
bsnGlobalDot11aCFPMaxDuration
OBJECT-TYPE
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
1.3.6.1.4.1.14179.2.3.3.2.3INTEGER (0..65535)read-onlycurrent
bsnGlobalDot11aCFPollable
OBJECT-TYPE
When this attribute is true, it shall indicate that the STA is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the STA is not able to respond to a CF-Poll with a data frame within a SIFS time.
1.3.6.1.4.1.14179.2.3.3.2.5INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11aCFPollRequest
OBJECT-TYPE
Specifies whether CFP
1.3.6.1.4.1.14179.2.3.3.2.6INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11aDTIMPeriod
OBJECT-TYPE
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
1.3.6.1.4.1.14179.2.3.3.2.7INTEGER (1..255)read-writecurrent
bsnGlobalDot11aMaximumTransmitPowerLevel
OBJECT-TYPE
This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.3.2.8Integer32read-onlydeprecated
bsnGlobalDot11aFirstChannelNumber
OBJECT-TYPE
This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.3.2.9Integer32read-onlydeprecated
bsnGlobalDot11aNumberofChannels
OBJECT-TYPE
This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
1.3.6.1.4.1.14179.2.3.3.2.10Integer32read-onlydeprecated
bsnGlobalDot11aRTSThreshold
OBJECT-TYPE
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
1.3.6.1.4.1.14179.2.3.3.2.11INTEGER (0..2347)read-onlycurrent
bsnGlobalDot11aShortRetryLimit
OBJECT-TYPE
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to bsnGlobalDot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7.
1.3.6.1.4.1.14179.2.3.3.2.12INTEGER (1..255)read-onlycurrent
bsnGlobalDot11aLongRetryLimit
OBJECT-TYPE
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than bsnGlobalDot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 4.
1.3.6.1.4.1.14179.2.3.3.2.13INTEGER (1..255)read-onlycurrent
bsnGlobalDot11aFragmentationThreshold
OBJECT-TYPE
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
1.3.6.1.4.1.14179.2.3.3.2.14INTEGER (256..2346)read-writecurrent
bsnGlobalDot11aMaxTransmitMSDULifetime
OBJECT-TYPE
The MaxTransmitMSDULifetime shall be the elapsed time in TU, after the initial transmission of an MSDU, after which further attempts to transmit the MSDU shall be terminated. The default value of this attribute shall be 512.
1.3.6.1.4.1.14179.2.3.3.2.15Unsigned32 (1..4294967295)read-onlycurrent
bsnGlobalDot11aMaxReceiveLifetime
OBJECT-TYPE
The MaxReceiveLifetime shall be the elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU shall be terminated. The default value shall be 512.
1.3.6.1.4.1.14179.2.3.3.2.16Unsigned32 (1..4294967295)read-onlycurrent
bsnGlobalDot11aTIThreshold
OBJECT-TYPE
The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold.
1.3.6.1.4.1.14179.2.3.3.2.17Integer32read-onlycurrent
bsnGlobalDot11aChannelAgilityEnabled
OBJECT-TYPE
This attribute indicates that the PHY channel agility functionality is enabled.
1.3.6.1.4.1.14179.2.3.3.2.18INTEGER {no(0), yes(1)}read-onlycurrent
bsnGlobalDot11h
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.4
bsnGlobalDot11hConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.4.1
bsnGlobalDot11hPowerConstraint
OBJECT-TYPE
Local maximum transmit power for a channel is defined as maximum transmit power level specified for the channel in the Country element minus the local power constraint specified for the channel in the Power Constraint element.The power constraint is coded as an unsigned integer in units of decibels. To disable power constraint set Power Constraint to 0.
1.3.6.1.4.1.14179.2.3.4.1.1INTEGER (0..30)read-writecurrent
bsnGlobalDot11hChannelSwitchEnable
OBJECT-TYPE
To enable or disable channel switch. When disabling Channel Switch no need to pass mode and count
1.3.6.1.4.1.14179.2.3.4.1.2INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11hChannelSwitchMode
OBJECT-TYPE
The Channel Switch Mode indicates any restriction on transmission until a channel switch. An Channel mode set to 1 means that the STA in a BSS to which the frame containing the element is addressed shall tranmit no further frames with in the BSS until the scheduled channel switch. A Channel switch mode set to 0 does not impose any requirement on the receiving STA.
1.3.6.1.4.1.14179.2.3.4.1.3INTEGER {disable(0), enable(1)}read-writecurrent
bsnGlobalDot11System
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.5
bsnGlobalDot11SystemInfo
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.3.5.1
bsnGlobalDot11SystemMobileStations
OBJECT-TYPE
Total number of clients per controller.
1.3.6.1.4.1.14179.2.3.5.1.1INTEGERread-onlycurrent
bsnRrm
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4
bsnRrmDot11a
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.1
bsnRrmDot11aGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.1.1
bsnRrmDot11aGlobalAutomaticGrouping
OBJECT-TYPE
Dynamic grouping has two modes: on and off. When the grouping is off, no dynamic grouping occurs. Each Airespace Switch optimizes only its own Airespace APs' parameters. When grouping is on, the Airespace Switches form groups and elect leaders to perform better dynamic parameter optimization.
1.3.6.1.4.1.14179.2.4.1.1.1INTEGER {automatic(1), off(2)}read-writedeprecated
bsnRrmDot11aGroupLeaderMacAddr
OBJECT-TYPE
This is the MAC address of the group leader for the dot11a group containing this Airespace Switch.
1.3.6.1.4.1.14179.2.4.1.1.2MacAddressread-onlydeprecated
bsnRrmIsDot11aGroupLeader
OBJECT-TYPE
If this Airespace Switch is a Dot11a Group Leader then this attribute will be true else it will be false.
1.3.6.1.4.1.14179.2.4.1.1.3INTEGER {no(0), yes(1)}read-onlydeprecated
bsnRrmDot11aGroupLastUpdateTime
OBJECT-TYPE
Last time the dot11a grouping was updated on this Airespace Switch. This is valid only if the Airespace Switch is a group leader.
1.3.6.1.4.1.14179.2.4.1.1.4Unsigned32read-onlydeprecated
bsnRrmDot11aGlobalGroupInterval
OBJECT-TYPE
When grouping is on, this interval(in secs) represents the period with which the grouping algorithm is run. Grouping algorithm will also run when the group contents changes and the automatic grouping is enabled. A dynamic grouping can be started upon request from the system administrator. Default value is 3600 secs.
1.3.6.1.4.1.14179.2.4.1.1.5Unsigned32read-onlydeprecated
bsnWrasDot11aGroupTable
OBJECT-TYPE
This is a table of Airespace Switch addresses that identifies the members of the Dot11a RF group containing this Airespace Switch. Max size is 20 entries. This has been deprecated for clrRrmDot11BandGrpMemberTable.
1.3.6.1.4.1.14179.2.4.1.1.9not-accessibledeprecated
bsnWrasDot11aGroupEntry
OBJECT-TYPE
...
1.3.6.1.4.1.14179.2.4.1.1.9.1not-accessibledeprecated
bsnWrasDot11aPeerMacAddress
OBJECT-TYPE
The MAC address of the member Switch.
1.3.6.1.4.1.14179.2.4.1.1.9.1.1MacAddressread-onlydeprecated
bsnWrasDot11aPeerIpAddress
OBJECT-TYPE
The IP address of the Airespace Switch.
1.3.6.1.4.1.14179.2.4.1.1.9.1.21IpAddressread-onlydeprecated
bsnRrmDot11aAPDefault
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.1.6
bsnRrmDot11aForeignInterferenceThreshold
OBJECT-TYPE
foreign 802.11A interference threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.1.6.1INTEGER (0..100)read-writecurrent
bsnRrmDot11aForeignNoiseThreshold
OBJECT-TYPE
802.11A foreign noise threshold between -127 and 0 dBm.
1.3.6.1.4.1.14179.2.4.1.6.2INTEGER (-127..0)read-writecurrent
bsnRrmDot11aRFUtilizationThreshold
OBJECT-TYPE
802.11A RF utlization threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.1.6.3INTEGER (0..100)read-writecurrent
bsnRrmDot11aThroughputThreshold
OBJECT-TYPE
802.11A throughput threshold between 1000 and 1000000
1.3.6.1.4.1.14179.2.4.1.6.4Unsigned32 (1000..1000000)read-writecurrent
bsnRrmDot11aMobilesThreshold
OBJECT-TYPE
802.11A mobiles threshold between 1 and 200
1.3.6.1.4.1.14179.2.4.1.6.5INTEGER (1..200)read-writecurrent
bsnRrmDot11aCoverageThreshold
OBJECT-TYPE
802.11A coverage threshold between 3 and 50.
1.3.6.1.4.1.14179.2.4.1.6.6INTEGER (3..50)read-writecurrent
bsnRrmDot11aMobileMinExceptionLevel
OBJECT-TYPE
802.11A mobile minimum exception level between 1 and 75
1.3.6.1.4.1.14179.2.4.1.6.7INTEGER (1..75)read-writecurrent
bsnRrmDot11aCoverageExceptionLevel
OBJECT-TYPE
802.11A coverage exception level between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.1.6.8INTEGER (0..100)read-writecurrent
bsnRrmDot11aSignalMeasurementInterval
OBJECT-TYPE
This interval (in secs) specifies how often do we get new signal strength measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.1.6.9Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11aNoiseMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new noise and interference measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.1.6.10Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11aLoadMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new load measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.1.6.11Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11aCoverageMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new coverage measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.1.6.12Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11aChannelMonitorList
OBJECT-TYPE
This attribute specifies the channels on which the switch monitors noise, interference and rogues. The first option allows monitoring on all channels while the second one on only those that are supported by the country of operation. the option dca implies that the monitor channel list will include those channels that are used by automatic channel assignment.
1.3.6.1.4.1.14179.2.4.1.6.13INTEGER {all(1), country(2), dca(3)}read-writecurrent
bsnRrmDot11aSignalTimeoutFactor
OBJECT-TYPE
This factor times Neighbor Packet Frequency specifies how long a neighbor expires if not receiving its neighbor packets. Default is 20 secs
1.3.6.1.4.1.14179.2.4.1.6.14Unsigned32 (5..60)read-writecurrent
bsnRrmDot11aSetFactoryDefault
OBJECT-TYPE
When set to activate all rrm parameters are reset to factory defaults
1.3.6.1.4.1.14179.2.4.1.7INTEGER {default(0), activate(1)}read-writecurrent
bsnRrmDot11b
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.2
bsnRrmDot11bGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.2.1
bsnRrmDot11bGlobalAutomaticGrouping
OBJECT-TYPE
Dynamic grouping has two modes: on and off. When the grouping is off, no dynamic grouping occurs. Each Airespace Switch optimizes only its own Airespace APs' parameters. When grouping is on, the Airespace Switchs form groups and elect leaders to perform better dynamic parameter optimization. This has been deprecated for clrRrmDot11BandGrpTable.
1.3.6.1.4.1.14179.2.4.2.1.1INTEGER {automatic(1), off(2)}read-writedeprecated
bsnRrmDot11bGroupLeaderMacAddr
OBJECT-TYPE
This is the MAC address of the group leader for the dot11b group containing this Airespace Switch. This has been deprecated for clrRrmDot11BandGrpTable.
1.3.6.1.4.1.14179.2.4.2.1.2MacAddressread-onlydeprecated
bsnRrmIsDot11bGroupLeader
OBJECT-TYPE
If this Airespace Switch is a Dot11b Group Leader then this attribute will be true else it will be false. This has been deprecated for clrRrmDot11BandGrpTable.
1.3.6.1.4.1.14179.2.4.2.1.3INTEGER {no(0), yes(1)}read-onlydeprecated
bsnRrmDot11bGroupLastUpdateTime
OBJECT-TYPE
Last time the dot11b grouping was updated on this Airespace Switch. This is valid only if the Airespace Switch is a group leader. This has been deprecated for clrRrmDot11BandGrpTable.
1.3.6.1.4.1.14179.2.4.2.1.4Unsigned32read-onlydeprecated
bsnRrmDot11bGlobalGroupInterval
OBJECT-TYPE
When grouping is on, this interval(in secs) represents the period with which the grouping algorithm is run. Grouping algorithm will also run when the group contents changes and the automatic grouping is enabled. A dynamic grouping can be started upon request from the system administrator. Default value is 3600 secs. This has been deprecated for clrRrmDot11BandGrpTable.
1.3.6.1.4.1.14179.2.4.2.1.5Unsigned32read-onlydeprecated
bsnWrasDot11bGroupTable
OBJECT-TYPE
This is a table of Airespace Switch addresses that identifies the members of the Dot11b RF group containing this Airespace Switch. Max size is 20 entries. This has been deprecated for clrRrmDot11BandGrpMemberTable.
1.3.6.1.4.1.14179.2.4.2.1.9not-accessibledeprecated
bsnWrasDot11bGroupEntry
OBJECT-TYPE
...
1.3.6.1.4.1.14179.2.4.2.1.9.1not-accessibledeprecated
bsnWrasDot11bPeerMacAddress
OBJECT-TYPE
The MAC address of the GIGE interface.
1.3.6.1.4.1.14179.2.4.2.1.9.1.1MacAddressread-onlydeprecated
bsnWrasDot11bPeerIpAddress
OBJECT-TYPE
The IP address of the Airespace Switch.
1.3.6.1.4.1.14179.2.4.2.1.9.1.21IpAddressread-onlydeprecated
bsnRrmDot11bAPDefault
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.4.2.6
bsnRrmDot11bForeignInterferenceThreshold
OBJECT-TYPE
Foreign 802.11A interference threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.2.6.1INTEGER (0..100)read-writecurrent
bsnRrmDot11bForeignNoiseThreshold
OBJECT-TYPE
802.11A foreign noise threshold between -127 and 0 dBm.
1.3.6.1.4.1.14179.2.4.2.6.2INTEGER (-127..0)read-writecurrent
bsnRrmDot11bRFUtilizationThreshold
OBJECT-TYPE
802.11A RF utlization threshold between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.2.6.3INTEGER (0..100)read-writecurrent
bsnRrmDot11bThroughputThreshold
OBJECT-TYPE
802.11A Airespace AP data-rate threshold between 1000 and 1000000
1.3.6.1.4.1.14179.2.4.2.6.4Unsigned32 (1000..1000000)read-writecurrent
bsnRrmDot11bMobilesThreshold
OBJECT-TYPE
802.11bg Airespace AP mobiles threshold between 1 and 200
1.3.6.1.4.1.14179.2.4.2.6.5INTEGER (1..200)read-writecurrent
bsnRrmDot11bCoverageThreshold
OBJECT-TYPE
802.11A Airespace AP coverage threshold between 3 and 50.
1.3.6.1.4.1.14179.2.4.2.6.6INTEGER (3..50)read-writecurrent
bsnRrmDot11bMobileMinExceptionLevel
OBJECT-TYPE
802.11A Airespace AP mobile minimum exception level between 1 and 75
1.3.6.1.4.1.14179.2.4.2.6.7INTEGER (1..75)read-writecurrent
bsnRrmDot11bCoverageExceptionLevel
OBJECT-TYPE
802.11A Airespace AP coverage exception level between 0 and 100 percent.
1.3.6.1.4.1.14179.2.4.2.6.8INTEGER (0..100)read-writecurrent
bsnRrmDot11bSignalMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new signal strength measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.2.6.9Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11bNoiseMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new noise and interference measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.2.6.10Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11bLoadMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new load measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.2.6.11Unsigned32 (60..3600)read-writecurrent
bsnRrmDot11bCoverageMeasurementInterval
OBJECT-TYPE
This interval( in secs) specifies how often do we get new coverage measurements at each Airespace AP. Default is 300 secs
1.3.6.1.4.1.14179.2.4.2.6.12Unsigned32 (10..3600)read-writecurrent
bsnRrmDot11bChannelMonitorList
OBJECT-TYPE
This attribute specifies the channels on which the switch monitors noise, interference and rogues. The first option allows monitoring on all channels while the second one on only those that are supported by the country of operation. the option dca implies that the monitor channel list will include those channels that are used by automatic channel assignment.
1.3.6.1.4.1.14179.2.4.2.6.13INTEGER {all(1), country(2), dca(3)}read-writecurrent
bsnRrmDot11bSignalTimeoutFactor
OBJECT-TYPE
This factor times Neighbor Packet Frequency specifies how long a neighbor expires if not receiving its neighbor packets. Default is 20 secs
1.3.6.1.4.1.14179.2.4.2.6.14Unsigned32 (5..60)read-writecurrent
bsnRrmDot11bSetFactoryDefault
OBJECT-TYPE
When set to activate all rrm parameters are reset to factory defaults
1.3.6.1.4.1.14179.2.4.2.7INTEGER {default(0), activate(1)}read-writecurrent
bsnAAA
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.5
bsnRadiusAuthServerTable
OBJECT-TYPE
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.1not-accessiblecurrent
bsnRadiusAuthServerEntry
OBJECT-TYPE
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.1.1not-accessiblecurrent
bsnRadiusAuthServerIndex
OBJECT-TYPE
A number uniquely identifying each RADIUS Authentication server with which this client communicates.
1.3.6.1.4.1.14179.2.5.1.1.1Integer32 (1..17)read-createcurrent
bsnRadiusAuthServerAddress
OBJECT-TYPE
The IP address of the RADIUS authentication server referred to in this table entry.
1.3.6.1.4.1.14179.2.5.1.1.2IpAddressread-createcurrent
bsnRadiusAuthClientServerPortNumber
OBJECT-TYPE
The UDP port the client is using to send requests to this server.
1.3.6.1.4.1.14179.2.5.1.1.3Integer32 (0..65535)read-createcurrent
bsnRadiusAuthServerKey
OBJECT-TYPE
The authentication and encryption key shared between the Radius client and this Radius Server. When the bsnRadiusAuthServerKeyFormat is hex it can have max length of 128 bytes. If the bsnRadiusAuthServerKeyFormat is Ascii it can have max length of 64 bytes.
1.3.6.1.4.1.14179.2.5.1.1.4OCTET STRING (SIZE(0..128))read-createcurrent
bsnRadiusAuthServerStatus
OBJECT-TYPE
Server enable or disable status.
1.3.6.1.4.1.14179.2.5.1.1.5INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAuthServerKeyFormat
OBJECT-TYPE
Format of the server key. When hex, the number of characters in the key should be even.
1.3.6.1.4.1.14179.2.5.1.1.6INTEGER {hex(1), ascii(2)}read-createcurrent
bsnRadiusAuthServerRFC3576
OBJECT-TYPE
Support for Dynamic Authorization Extensions to RADIUS.
1.3.6.1.4.1.14179.2.5.1.1.7INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAuthServerIPSec
OBJECT-TYPE
IPSec over RADIUS
1.3.6.1.4.1.14179.2.5.1.1.8INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAuthServerIPSecAuth
OBJECT-TYPE
The Hash algorithm employed by the IPSec Encrpytion. This applies only when bsnRadiusAuthServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.1.1.9INTEGER {none(0), hmacMd5(1), hmacSha1(2)}read-createcurrent
bsnRadiusAuthServerIPSecEncryption
OBJECT-TYPE
The Encryption algorithm employed by this IpSec Encryption. This applies only when bsnRadiusAuthServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.1.1.10INTEGER {none(0), des(1), tripleDes(2), aesCbc(3)}read-createcurrent
bsnRadiusAuthServerIPSecIKEPhase1
OBJECT-TYPE
VPN IKE Phase 1 Mode type as per the IpSec standards. This applies only when bsnRadiusAuthServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.1.1.11INTEGER {main(1), agressive(2)}read-createcurrent
bsnRadiusAuthServerIPSecIKELifetime
OBJECT-TYPE
IPSec IKE's Lifetime. This applies only when bsnRadiusAuthServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.1.1.12Integer32 (1800..345600)read-createcurrent
bsnRadiusAuthServerIPSecDHGroup
OBJECT-TYPE
IKE's Diffie-Hellman Group. This applies only when bsnRadiusAuthServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.1.1.13INTEGER {group1(1), group2(2), group5(5)}read-createcurrent
bsnRadiusAuthServerNetworkUserConfig
OBJECT-TYPE
When enabled, this entry is considered as network user radius authenticating server entry.
1.3.6.1.4.1.14179.2.5.1.1.14INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAuthServerMgmtUserConfig
OBJECT-TYPE
When enabled, this entry is considered as management user radius authenticating server entry.
1.3.6.1.4.1.14179.2.5.1.1.15INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAuthServerRetransmitTimeout
OBJECT-TYPE
Time in seconds after which a radius authentication request will timeout and a retransmission will be taken up by the switch.
1.3.6.1.4.1.14179.2.5.1.1.17INTEGER (2..30)read-createcurrent
bsnRadiusAuthServerKeyWrapKEKkey
OBJECT-TYPE
Key-encryption-key (KEK) used as the key for the 128 bit AES Key Wrap algorithm to encrypt the PMK in the key attribute. If the key is present in request, it should be taken as a hint by the server that the sender prefers this method of encryption over others. To maintain security actual keys after configuration are never returned in get request. If keys are configured then '***' is returned. If keys are not configured then empty string is retunred. bsnRadiusAuthServerKeyFormat is used this key. if the format chosen is ascii then it should be 16 bytes in length. if the format chosen is hex then it should be 32 bytes in length.
1.3.6.1.4.1.14179.2.5.1.1.18OCTET STRINGread-createcurrent
bsnRadiusAuthServerKeyWrapMACKkey
OBJECT-TYPE
Message-authenticator-code-key ( MACK) - used as the key for the HMAC-SHA-1 algorithm to sign the RADIUS message to prevent spoofing. MACK must be configured when KEK is configured. To maintain security actual keys after configuration are never returned in get request. If keys are configured then '***' is returned. If keys are not configured then empty string is returned. bsnRadiusAuthServerKeyFormat is used this key. if the format chosen is ascii then it should be 20 bytes in length. If the format chosen is hex then it should be 40 bytes in length.
1.3.6.1.4.1.14179.2.5.1.1.19OCTET STRINGread-createcurrent
bsnRadiusAuthServerKeyWrapFormat
OBJECT-TYPE
Format for the Key Wrap keys. This object is mandatory for manager to send if the key Wrap keys are being configured. Get on this object will always return hex(1)
1.3.6.1.4.1.14179.2.5.1.1.20INTEGER {hex(1), ascii(2)}read-createcurrent
bsnRadiusAuthServerRowStatus
OBJECT-TYPE
Row Status for creation/deletion
1.3.6.1.4.1.14179.2.5.1.1.26RowStatusread-createcurrent
bsnRadiusAccServerTable
OBJECT-TYPE
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.2not-accessiblecurrent
bsnRadiusAccServerEntry
OBJECT-TYPE
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.2.1not-accessiblecurrent
bsnRadiusAccServerIndex
OBJECT-TYPE
A number uniquely identifying each RADIUS Accounting server with which this client communicates.
1.3.6.1.4.1.14179.2.5.2.1.1Integer32 (1..17)read-createcurrent
bsnRadiusAccServerAddress
OBJECT-TYPE
The IP address of the RADIUS accounting server referred to in this table entry.
1.3.6.1.4.1.14179.2.5.2.1.2IpAddressread-createcurrent
bsnRadiusAccClientServerPortNumber
OBJECT-TYPE
The UDP port the client is using to send requests to this server.
1.3.6.1.4.1.14179.2.5.2.1.3Integer32 (0..65535)read-createcurrent
bsnRadiusAccServerKey
OBJECT-TYPE
The authentication and encryption key shared between the Radius client and this Radius Server. When the bsnRadiusAccServerKeyFormat is hex it can have max length of 128 bytes. If the bsnRadiusAccServerKeyFormat is Ascii it can have max length of 64 bytes.
1.3.6.1.4.1.14179.2.5.2.1.4OCTET STRING (SIZE(0..128))read-createcurrent
bsnRadiusAccServerStatus
OBJECT-TYPE
Server enable or disable status.
1.3.6.1.4.1.14179.2.5.2.1.5INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAccServerKeyFormat
OBJECT-TYPE
Format of the server key. When hex, the number of characters in the key should be even.
1.3.6.1.4.1.14179.2.5.2.1.6INTEGER {hex(1), ascii(2)}read-createcurrent
bsnRadiusAccServerIPSec
OBJECT-TYPE
IPSec over RADIUS
1.3.6.1.4.1.14179.2.5.2.1.7INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAccServerIPSecAuth
OBJECT-TYPE
The Hash algorithm employed by the IPSec Encrpytion. This applies only when bsnRadiusAccServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.2.1.8INTEGER {none(0), hmacMd5(1), hmacSha1(2)}read-createcurrent
bsnRadiusAccServerIPSecEncryption
OBJECT-TYPE
The Encryption algorithm employed by this IpSec Encryption. This applies only when bsnRadiusAccServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.2.1.9INTEGER {none(0), des(1), tripleDes(2), aesCbc(3)}read-createcurrent
bsnRadiusAccServerIPSecIKEPhase1
OBJECT-TYPE
VPN IKE Phase 1 Mode type as per the IpSec standards. This applies only when bsnRadiusAccServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.2.1.10INTEGER {main(1), agressive(2)}read-createcurrent
bsnRadiusAccServerIPSecIKELifetime
OBJECT-TYPE
IPSec IKE's Lifetime. This applies only when bsnRadiusAccServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.2.1.11Integer32 (1800..345600)read-createcurrent
bsnRadiusAccServerIPSecDHGroup
OBJECT-TYPE
IKE's Diffie-Hellman Group. This applies only when bsnRadiusAccServerIPSec is in enable state.
1.3.6.1.4.1.14179.2.5.2.1.12INTEGER {group1(1), group2(2), group5(5)}read-createcurrent
bsnRadiusAccServerNetworkUserConfig
OBJECT-TYPE
When enabled, this entry is considered as network user radius accounting server entry.
1.3.6.1.4.1.14179.2.5.2.1.13INTEGER {disable(0), enable(1)}read-createcurrent
bsnRadiusAccServerRetransmitTimeout
OBJECT-TYPE
Time in seconds after which a radius accounting request will timeout and a retransmission will be taken up by the switch.
1.3.6.1.4.1.14179.2.5.2.1.14INTEGER (2..30)read-createcurrent
bsnRadiusAccServerRowStatus
OBJECT-TYPE
Row Status for creation/deletion
1.3.6.1.4.1.14179.2.5.2.1.26RowStatusread-createcurrent
bsnRadiusAuthServerStatsTable
OBJECT-TYPE
The listing the Statistics of RADIUS authentication servers.
1.3.6.1.4.1.14179.2.5.3not-accessiblecurrent
bsnRadiusAuthServerStatsEntry
OBJECT-TYPE
An entry representing statistics a RADIUS authentication server with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.3.1not-accessiblecurrent
bsnRadiusAuthClientRoundTripTime
OBJECT-TYPE
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
1.3.6.1.4.1.14179.2.5.3.1.6TimeTicksread-onlycurrent
bsnRadiusAuthClientAccessRequests
OBJECT-TYPE
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
1.3.6.1.4.1.14179.2.5.3.1.7Counter32read-onlycurrent
bsnRadiusAuthClientAccessRetransmissions
OBJECT-TYPE
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
1.3.6.1.4.1.14179.2.5.3.1.8Counter32read-onlycurrent
bsnRadiusAuthClientAccessAccepts
OBJECT-TYPE
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
1.3.6.1.4.1.14179.2.5.3.1.9Counter32read-onlycurrent
bsnRadiusAuthClientAccessRejects
OBJECT-TYPE
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
1.3.6.1.4.1.14179.2.5.3.1.10Counter32read-onlycurrent
bsnRadiusAuthClientAccessChallenges
OBJECT-TYPE
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
1.3.6.1.4.1.14179.2.5.3.1.11Counter32read-onlycurrent
bsnRadiusAuthClientMalformedAccessResponses
OBJECT-TYPE
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as malformed access responses.
1.3.6.1.4.1.14179.2.5.3.1.12Counter32read-onlycurrent
bsnRadiusAuthClientBadAuthenticators
OBJECT-TYPE
The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.
1.3.6.1.4.1.14179.2.5.3.1.13Counter32read-onlycurrent
bsnRadiusAuthClientPendingRequests
OBJECT-TYPE
The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Acess-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.
1.3.6.1.4.1.14179.2.5.3.1.14Gauge32read-onlycurrent
bsnRadiusAuthClientTimeouts
OBJECT-TYPE
The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
1.3.6.1.4.1.14179.2.5.3.1.15Counter32read-onlycurrent
bsnRadiusAuthClientUnknownTypes
OBJECT-TYPE
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
1.3.6.1.4.1.14179.2.5.3.1.16Counter32read-onlycurrent
bsnRadiusAuthClientPacketsDropped
OBJECT-TYPE
The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.
1.3.6.1.4.1.14179.2.5.3.1.36Counter32read-onlycurrent
bsnRadiusAccServerStatsTable
OBJECT-TYPE
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.4not-accessiblecurrent
bsnRadiusAccServerStatsEntry
OBJECT-TYPE
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.4.1not-accessiblecurrent
bsnRadiusAccClientRoundTripTime
OBJECT-TYPE
The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
1.3.6.1.4.1.14179.2.5.4.1.6TimeTicksread-onlycurrent
bsnRadiusAccClientRequests
OBJECT-TYPE
The number of RADIUS Accounting-Request packets sent. This does not include retransmissions.
1.3.6.1.4.1.14179.2.5.4.1.7Counter32read-onlycurrent
bsnRadiusAccClientRetransmissions
OBJECT-TYPE
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.
1.3.6.1.4.1.14179.2.5.4.1.8Counter32read-onlycurrent
bsnRadiusAccClientResponses
OBJECT-TYPE
The number of RADIUS packets received on the accounting port from this server.
1.3.6.1.4.1.14179.2.5.4.1.9Counter32read-onlycurrent
bsnRadiusAccClientMalformedResponses
OBJECT-TYPE
The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.
1.3.6.1.4.1.14179.2.5.4.1.10Counter32read-onlycurrent
bsnRadiusAccClientBadAuthenticators
OBJECT-TYPE
The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.
1.3.6.1.4.1.14179.2.5.4.1.11Counter32read-onlycurrent
bsnRadiusAccClientPendingRequests
OBJECT-TYPE
The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
1.3.6.1.4.1.14179.2.5.4.1.12Gauge32read-onlycurrent
bsnRadiusAccClientTimeouts
OBJECT-TYPE
The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.
1.3.6.1.4.1.14179.2.5.4.1.13Counter32read-onlycurrent
bsnRadiusAccClientUnknownTypes
OBJECT-TYPE
The number of RADIUS packets of unknown type which were received from this server on the accounting port.
1.3.6.1.4.1.14179.2.5.4.1.14Counter32read-onlycurrent
bsnRadiusAccClientPacketsDropped
OBJECT-TYPE
The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.
1.3.6.1.4.1.14179.2.5.4.1.34Counter32read-onlycurrent
bsnUsersTable
OBJECT-TYPE
The (conceptual) table listing Wlan Users
1.3.6.1.4.1.14179.2.5.5not-accessibleobsolete
bsnUsersEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.5.1not-accessibleobsolete
bsnUserName
OBJECT-TYPE
User Name
1.3.6.1.4.1.14179.2.5.5.1.2OCTET STRING (SIZE(1..24))read-createobsolete
bsnUserPassword
OBJECT-TYPE
User Password
1.3.6.1.4.1.14179.2.5.5.1.3OCTET STRING (SIZE(1..24))read-createobsolete
bsnUserEssIndex
OBJECT-TYPE
User WLAN ID. Value 0 implies that this applies to any WLAN ID.
1.3.6.1.4.1.14179.2.5.5.1.4INTEGER (0..517)read-createobsolete
bsnUserAccessMode
OBJECT-TYPE
User Access Mode.
1.3.6.1.4.1.14179.2.5.5.1.5INTEGER {readOnly(1), readWrite(2)}read-createobsolete
bsnUserType
OBJECT-TYPE
User Type.
1.3.6.1.4.1.14179.2.5.5.1.6INTEGER {management(1), wlan(2), macFilter(3)}read-createobsolete
bsnUserInterfaceName
OBJECT-TYPE
Interface Name.
1.3.6.1.4.1.14179.2.5.5.1.7OCTET STRING (SIZE(0..32))read-createobsolete
bsnUserRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.5.1.26RowStatusread-createobsolete
bsnBlackListClientTable
OBJECT-TYPE
The table listing Wlan excluded Clients
1.3.6.1.4.1.14179.2.5.6not-accessiblecurrent
bsnBlackListClientEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.6.1not-accessiblecurrent
bsnBlackListClientMacAddress
OBJECT-TYPE
Excluded Client MAC Address
1.3.6.1.4.1.14179.2.5.6.1.1OCTET STRING (SIZE(1..12))read-createcurrent
bsnBlackListClientDescription
OBJECT-TYPE
Excluded Client Description
1.3.6.1.4.1.14179.2.5.6.1.2OCTET STRING (SIZE(0..32))read-createcurrent
bsnBlackListClientRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.6.1.22RowStatusread-createcurrent
bsnAclTable
OBJECT-TYPE
The table listing ACLs (Access Control Lists) on the Switch.
1.3.6.1.4.1.14179.2.5.7not-accessiblecurrent
bsnAclEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.7.1not-accessiblecurrent
bsnAclName
OBJECT-TYPE
Name of the Access Control List.
1.3.6.1.4.1.14179.2.5.7.1.1OCTET STRING (SIZE(1..32))read-createcurrent
bsnAclApplyMode
OBJECT-TYPE
The apply mode of the ACL on the switch. Mode value 'applied' means the ACL has been applied on the switch.
1.3.6.1.4.1.14179.2.5.7.1.2INTEGER {notapplied(0), applied(1)}read-onlycurrent
bsnAclRowStatus
OBJECT-TYPE
Row Status of the ACL.
1.3.6.1.4.1.14179.2.5.7.1.20RowStatusread-createcurrent
bsnAclRuleTable
OBJECT-TYPE
The table listing Acl Rules(Access Control List Entries) on the ACL with name bsnAclName.
1.3.6.1.4.1.14179.2.5.8not-accessiblecurrent
bsnAclRuleEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.8.1not-accessiblecurrent
bsnAclRuleIndex
OBJECT-TYPE
Index of the ACL rule. This can be updated to reset the sequence of the rules of an ACL.
1.3.6.1.4.1.14179.2.5.8.1.2Unsigned32 (1..64)read-createcurrent
bsnAclRuleAction
OBJECT-TYPE
The permission mode of a rule.
1.3.6.1.4.1.14179.2.5.8.1.3INTEGER {deny(0), permit(1)}read-createcurrent
bsnAclRuleDirection
OBJECT-TYPE
The direction of the packet to which the rule may be applied.
1.3.6.1.4.1.14179.2.5.8.1.4INTEGER {inbound(0), outbound(1), any(2)}read-createcurrent
bsnAclRuleSourceIpAddress
OBJECT-TYPE
Source IP Address of the ACL rule. A value 0 implies any source address.
1.3.6.1.4.1.14179.2.5.8.1.5IpAddressread-createcurrent
bsnAclRuleSourceIpNetmask
OBJECT-TYPE
Source IP Netmask of the ACL rule. A value 0 implies any source mask.
1.3.6.1.4.1.14179.2.5.8.1.6IpAddressread-createcurrent
bsnAclRuleDestinationIpAddress
OBJECT-TYPE
Destination IP Address of the ACL rule. A value 0 implies any destination address.
1.3.6.1.4.1.14179.2.5.8.1.7IpAddressread-createcurrent
bsnAclRuleDestinationIpNetmask
OBJECT-TYPE
Destination Netmask of the ACL rule. A value 0 implies any destination mask.
1.3.6.1.4.1.14179.2.5.8.1.8IpAddressread-createcurrent
bsnAclRuleProtocol
OBJECT-TYPE
Protocol of the packet. It can be either of the pre specified protocols like TCP, UDP, ICMP, ESP, AH, GRE, IP, Ethernet Over IP, OSPF or any number between 0 and 255. A value 256 implies that this rule applies to 'Any' protocol.
1.3.6.1.4.1.14179.2.5.8.1.9Unsigned32 (0..256)read-createcurrent
bsnAclRuleStartSourcePort
OBJECT-TYPE
Source Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule applies to 'Any' source port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
1.3.6.1.4.1.14179.2.5.8.1.10Unsigned32 (0..65535)read-createcurrent
bsnAclRuleEndSourcePort
OBJECT-TYPE
Source Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule applies to 'Any' source port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
1.3.6.1.4.1.14179.2.5.8.1.11Unsigned32 (0..65535)read-createcurrent
bsnAclRuleStartDestinationPort
OBJECT-TYPE
Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
1.3.6.1.4.1.14179.2.5.8.1.12Unsigned32 (0..65535)read-createcurrent
bsnAclRuleEndDestinationPort
OBJECT-TYPE
Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
1.3.6.1.4.1.14179.2.5.8.1.13Unsigned32 (0..65535)read-createcurrent
bsnAclRuleDscp
OBJECT-TYPE
DSCP value of the rule. A value 256 implies Any
1.3.6.1.4.1.14179.2.5.8.1.14Unsigned32 (0..256)read-createcurrent
bsnAclNewRuleIndex
OBJECT-TYPE
New Index of the ACL rule. This attribute should be updated if the requirement is to reset the sequence of the rules of an ACL. A read on this will not yield anything.
1.3.6.1.4.1.14179.2.5.8.1.15Unsigned32 (1..64)read-createcurrent
bsnAclRuleRowStatus
OBJECT-TYPE
Row Status of the ACL Rule.
1.3.6.1.4.1.14179.2.5.8.1.40RowStatusread-createcurrent
bsnMacFilterTable
OBJECT-TYPE
The table listing MAC Filter entries
1.3.6.1.4.1.14179.2.5.9not-accessiblecurrent
bsnMacFilterEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.9.1not-accessiblecurrent
bsnMacFilterAddress
OBJECT-TYPE
MAC Address of the entry
1.3.6.1.4.1.14179.2.5.9.1.1OCTET STRING (SIZE(1..24))read-createcurrent
bsnMacFilterWlanId
OBJECT-TYPE
WLAN ID of the WLAN that the user can connect to. 0 means any WLAN ID.
1.3.6.1.4.1.14179.2.5.9.1.2INTEGER (0..517)read-createcurrent
bsnMacFilterInterfaceName
OBJECT-TYPE
Interface Name.
1.3.6.1.4.1.14179.2.5.9.1.3OCTET STRING (SIZE(0..32))read-createcurrent
bsnMacFilterDescription
OBJECT-TYPE
Description of the MAC Filter entry.
1.3.6.1.4.1.14179.2.5.9.1.4OCTET STRING (SIZE(0..32))read-createcurrent
bsnMacFilterRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.9.1.24RowStatusread-createcurrent
bsnLocalNetUserTable
OBJECT-TYPE
The table listing Local Net User entries.
1.3.6.1.4.1.14179.2.5.10not-accessiblecurrent
bsnLocalNetUserEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.10.1not-accessiblecurrent
bsnLocalNetUserName
OBJECT-TYPE
Name of the net user.
1.3.6.1.4.1.14179.2.5.10.1.1OCTET STRING (SIZE(1..24))read-createcurrent
bsnLocalNetUserWlanId
OBJECT-TYPE
WLAN ID of the WLAN that the user can connect to. 0 means any WLAN ID.
1.3.6.1.4.1.14179.2.5.10.1.2INTEGER (0..517)read-createcurrent
bsnLocalNetUserPassword
OBJECT-TYPE
User Password.
1.3.6.1.4.1.14179.2.5.10.1.3OCTET STRING (SIZE(0..24))read-createcurrent
bsnLocalNetUserDescription
OBJECT-TYPE
Description of the Net User entry.
1.3.6.1.4.1.14179.2.5.10.1.4OCTET STRING (SIZE(0..32))read-createcurrent
bsnLocalNetUserLifetime
OBJECT-TYPE
This object indicates the lifetime of an user account expressed in hundredths of a second. Lifetime period other than 0 will make it a guest-user. Minimum value for guest user is 60 seconds (6000). Once configured as non-guest user can not be change to guest user and vice-versa. Default value is for a day and max lifetime is 259200000(30 days). WLANIds, which have webauth policy are valid for guest access user.
1.3.6.1.4.1.14179.2.5.10.1.5TimeInterval (0 | 6000..259200000)read-createcurrent
bsnLocalNetUserStartTime
OBJECT-TYPE
This object indicates the time when the guest user account was created and expressed as the number of seconds elapsed since 1st Jan, 1970.
1.3.6.1.4.1.14179.2.5.10.1.6TimeTicksread-onlycurrent
bsnLocalNetUserRemainingTime
OBJECT-TYPE
This object indicates the remaining session time for the guest user in hundredths of a second.
1.3.6.1.4.1.14179.2.5.10.1.7TimeIntervalread-onlycurrent
bsnLocalNetUserRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.10.1.24RowStatusread-createcurrent
bsnLocalManagementUserTable
OBJECT-TYPE
The (conceptual) table listing Local Management Users
1.3.6.1.4.1.14179.2.5.11not-accessiblecurrent
bsnLocalManagementUserEntry
OBJECT-TYPE
....
1.3.6.1.4.1.14179.2.5.11.1not-accessiblecurrent
bsnLocalManagementUserName
OBJECT-TYPE
User Name
1.3.6.1.4.1.14179.2.5.11.1.1OCTET STRING (SIZE(1..24))read-createcurrent
bsnLocalManagementUserPassword
OBJECT-TYPE
User Password
1.3.6.1.4.1.14179.2.5.11.1.2OCTET STRING (SIZE(1..24))read-createcurrent
bsnLocalManagementUserAccessMode
OBJECT-TYPE
User Access Mode.
1.3.6.1.4.1.14179.2.5.11.1.3INTEGER {readOnly(1), readWrite(2)}read-createcurrent
bsnLocalManagementUserRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.11.1.23RowStatusread-createcurrent
bsnRadiusAuthKeyWrapEnable
OBJECT-TYPE
When keyWrap is enable then for 801.1X and 802.11i client Authentication, request is sent to those radius servers which has KEK and MACK keys are configured. Radius servers are widely used for user authentications. In 802.11i and 802.1X type authentication, the controller recives Pairwise Master KEy(PMK) from RADIUS sever using vendor specific RADIUS attributes, which uses MPPE RFC3078. Since MPPE uses RC4 algorithm to provide data confidentiality, it is not FIPS approved. For this RADIUS key WRAP attributes, bsnRadiusAuthServerKeyWrap and bsnRadiusAuthServerKeyWrapMACKkey have been added, which are used to securely transfer encryption keys using non-proprietary techniques.
1.3.6.1.4.1.14179.2.5.12TruthValueread-writecurrent
bsnRadiusAuthCacheCredentialsLocally
OBJECT-TYPE
Enable or disable caching of credentials locally for RADIUS Auth servers. This is used when a client uses a one time password authentication scheme.
1.3.6.1.4.1.14179.2.5.14INTEGER {disable(0), enable(1)}read-writedeprecated
bsnAAAMacDelimiter
OBJECT-TYPE
The delimiter to be used for mac filtering. It can be colon as in xx:xx:xx:xx:xx:xx or hyphen as in xx-xx-xx-xx-xx-xx or single hyphen as in xxxxxx-xxxxxx or no delimiter as in xxxxxxxxxxxx.
1.3.6.1.4.1.14179.2.5.15INTEGER {noDelimiter(0), colon(1), hyphen(2), singleHyphen(3)}read-writecurrent
bsnAAARadiusCompatibilityMode
OBJECT-TYPE
The required compatibility mode for MAC filtering. For ciscoACS, the expected MAC delimiter setting is colon and for orinocoRadius, it is singleHyphen.
1.3.6.1.4.1.14179.2.5.16INTEGER {ciscoACS(0), orinocoRadius(1), other(2)}read-writecurrent
bsnAAARadiusCallStationIdType
OBJECT-TYPE
This attribute configures the call station ID information sent in RADIUS messages. The value undefined cannot be set during the write operation. ipAddr : system IP Address macAddr : system MAC address apMacAddress : AP Radio MAC Address apMacAddressSsid : AP radio MAC Address and SSID apNameSsid : AP name and SSID apName : AP Name apGroupName : AP Group Name apLocation : AP Location apVlanId : VLAN id apMacEthAddress : Ethernet MAC address apMacEthAddressSsid : AP EthernetMAC address and SSID apLabelAddress : AP MAC address on APLabel apLabelAddressSsid : AP Label MAC address and SSID
1.3.6.1.4.1.14179.2.5.17INTEGER {ipAddr(0), macAddr(1), apMacAddress(2), apMacAddressSsid(3), apNameSsid(4), apName(5), apGroupName(6), apLocation(7), apVlanId(8), apMacEthAddress(9), apMacEthAddressSsid(10), apLabelAddress(11), apLabelAddressSsid(12)}read-writecurrent
bsnExternalPolicyServerAclName
OBJECT-TYPE
This attribute configures the ACL Name for External Policy Servers
1.3.6.1.4.1.14179.2.5.18DisplayString (SIZE(0..32))read-writecurrent
bsnExternalPolicyServerTable
OBJECT-TYPE
The (conceptual) table listing the External Policy servers with which client share a secret.
1.3.6.1.4.1.14179.2.5.19not-accessibleobsolete
bsnExternalPolicyServerEntry
OBJECT-TYPE
An entry (conceptual row) representing an External policy server with which the client shares a secret.
1.3.6.1.4.1.14179.2.5.19.1not-accessibleobsolete
bsnExternalPolicyServerIndex
OBJECT-TYPE
A number uniquely identifying each External Policy server with which this client communicates.
1.3.6.1.4.1.14179.2.5.19.1.1Integer32 (0..2)read-createobsolete
bsnExternalPolicyServerAddress
OBJECT-TYPE
The IP address of the External Policy server referred to in this table entry.
1.3.6.1.4.1.14179.2.5.19.1.2IpAddressread-createobsolete
bsnExternalPolicyServerPortNumber
OBJECT-TYPE
The UDP port the client is using to send requests to this server.
1.3.6.1.4.1.14179.2.5.19.1.3Integer32 (0..65535)read-createobsolete
bsnExternalPolicyServerKey
OBJECT-TYPE
The authentication and encryption key shared between the client and this External Policy Server.
1.3.6.1.4.1.14179.2.5.19.1.4OCTET STRING (SIZE(0..16))read-createobsolete
bsnExternalPolicyServerAdminStatus
OBJECT-TYPE
Server enable or disable status.
1.3.6.1.4.1.14179.2.5.19.1.5INTEGER {disable(0), enable(1)}read-createobsolete
bsnExternalPolicyServerConnectionStatus
OBJECT-TYPE
Server enable or disable status.
1.3.6.1.4.1.14179.2.5.19.1.6INTEGER {disconnected(0), connected(1)}read-onlyobsolete
bsnExternalPolicyServerRowStatus
OBJECT-TYPE
Row Status for creation/deletion
1.3.6.1.4.1.14179.2.5.19.1.26RowStatusread-createobsolete
bsnAAALocalDatabaseSize
OBJECT-TYPE
This attribute is the total number of entries permitted in the local users database. This is the combined total of entries for Local Management Users, Local Net Users, Disabled Clients (previously known as blacklistclients and the MAC Filters. If the database size limit is reached, no more entries in any of these user lists are allowed to be created. To continue creating more entries, one should increase the size of the database. This value is applied on reboot and then matches the bsnAACurrentLocalDatabaseSize.
1.3.6.1.4.1.14179.2.5.20Integer32 (512..2048)read-writecurrent
bsnAAACurrentLocalDatabaseSize
OBJECT-TYPE
This attribute is the maximum number of entries in the local users database that is effective currently. This is the combined total of entries for Local Management Users, Local Net Users, Disabled Clients (previously known as blacklist clients) and the MAC Filters.
1.3.6.1.4.1.14179.2.5.21Integer32 (512..2048)read-onlycurrent
bsnAPAuthorizationTable
OBJECT-TYPE
The table listing AP Authorization entries
1.3.6.1.4.1.14179.2.5.22not-accessiblecurrent
bsnAPAuthorizationEntry
OBJECT-TYPE
BsnAPAuthorizationEntry
1.3.6.1.4.1.14179.2.5.22.1not-accessiblecurrent
bsnAPAuthMacAddress
OBJECT-TYPE
MAC Address of the AP entry
1.3.6.1.4.1.14179.2.5.22.1.1OCTET STRING (SIZE(1..24))read-createcurrent
bsnAPAuthCertificateType
OBJECT-TYPE
Supported certificate types are MIC, SSC (Self-Signed-Certificate) or no certificate.
1.3.6.1.4.1.14179.2.5.22.1.2INTEGER {unknown(0), mic(1), ssc(2), locMic(3), locSsc(4), none(5)}read-createcurrent
bsnAPAuthHashKey
OBJECT-TYPE
SHA1 hash key for SSC certificate validation. It has to be 40 hexa-decimal characters. This is considered when certificate type is SSC.
1.3.6.1.4.1.14179.2.5.22.1.3OCTET STRING (SIZE(0..40))read-createcurrent
bsnAPAuthRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.5.22.1.20RowStatusread-createcurrent
bsnTrap
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.6
bsnTrapControl
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.6.1
bsnDot11StationTrapControlMask
OBJECT-TYPE
This mask describes what events merit traps to network management. If the bit for a particular event is turned on then notification will be generated on event occurence. Event corresponding value ----- ----------------- bsnDot11StationDisassociate 1 bsnDot11StationDeauthenticate 2 bsnDot11StationAuthenticateFail 4 bsnDot11StationAssociateFail 8 bsnDot11StationBlacklisted 16 bsnDot11StationAssociate 32 ciscoLwappDot11ClientMovedToRunState 64 By Default all bits are off.
1.3.6.1.4.1.14179.2.6.1.1Unsigned32read-writecurrent
bsnAPTrapControlMask
OBJECT-TYPE
This mask describes what events merit traps to network management. If the bit for a particular event is turned on then notification will be generated on event occurance. Event corresponding bit ----- ----------------- bsnAPAssociate/Disassociate 1 bsnAPIfUp/Down 4 bsnAPAuthorizationFailureCause 16 By Default all bits are on.
1.3.6.1.4.1.14179.2.6.1.2Unsigned32read-writecurrent
bsnAPProfileTrapControlMask
OBJECT-TYPE
This mask describes what events merit traps to network management. If the bit for a particular event is turned on then notification will be generated on event occurance. Event corresponding bit ----- ----------------- LoadProfileFail 1 NoiseProfileFail 2 InterferenceProfileFail 4 CoverageProfileFailed 8
1.3.6.1.4.1.14179.2.6.1.3Unsigned32read-writecurrent
bsnAPParamUpdateTrapControlMask
OBJECT-TYPE
Mac Parameters are updated for a Airespace AP interface whenever Dynamic Algorithm are run. This mask describes what update events merit traps to network management. If the bit for a particular event is turned on then notification will be generated on event occurance. Event corresponding bit ----- ----------------- TxPowerChange 1 ChannelChange 2 AntennaChange 4 RTSCTSThresholdChange 8 EDThresholdChange 16 FragmentationThresholdChange 32
1.3.6.1.4.1.14179.2.6.1.4Unsigned32read-writecurrent
bsnIpsecTrapsMask
OBJECT-TYPE
This mask describes what events merit traps to network management. If the bit for a particular event is turned on then notification will be generated on event occurance. Event corresponding bit ----- ----------------- bsnIpsecEspAuthFailureTrap 1 bsnIpsecEspReplayFailureTrap 2 bsnIpsecEspPolicyFailureTrap 4 bsnIpsecEspInvalidSpiTrap 8 bsnIpsecOtherPolicyFailureTrap 16 bsnIpsecIkeNegFailure 32 bsnIpsecSuiteNegFailure 64 bsnIpsecInvalidCookieTrap 128
1.3.6.1.4.1.14179.2.6.1.5Unsigned32read-writecurrent
bsnRogueAPTrapEnable
OBJECT-TYPE
If Rogue AP Detection and Removed Traps need to be sent
1.3.6.1.4.1.14179.2.6.1.6INTEGER {disable(0), enable(1)}read-writecurrent
bsnRADIUSServerTrapEnable
OBJECT-TYPE
if RADIUS Server Traps need to be sent
1.3.6.1.4.1.14179.2.6.1.7INTEGER {disable(0), enable(1)}read-writecurrent
bsnAuthenticationFailureTrapEnable
OBJECT-TYPE
If Authentication Failure Traps need to be sent
1.3.6.1.4.1.14179.2.6.1.8INTEGER {disable(0), enable(1)}read-writecurrent
bsnConfigSaveTrapEnable
OBJECT-TYPE
If Rogue AP Detection and Removed Traps need to be sent
1.3.6.1.4.1.14179.2.6.1.9INTEGER {disable(0), enable(1)}read-writecurrent
bsn80211SecurityTrapControlMask
OBJECT-TYPE
This mask is for Security related trap controls. Event corresponding bit ----- ----------------- bsnWepKeyDecryptError 1 bsnSignatureAttackDetected 2 By Default all bits are off.
1.3.6.1.4.1.14179.2.6.1.10Unsigned32read-writecurrent
bsnWpsTrapControlEnable
OBJECT-TYPE
This control is for WPS(Wireless Intrusion Protection System) related traps.
1.3.6.1.4.1.14179.2.6.1.11INTEGER {disable(0), enable(1)}read-writecurrent
bsnTrapVariable
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.6.2
bsnAuthFailureUserName
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.1OCTET STRING (SIZE(0..32))accessible-for-notifycurrent
bsnAuthFailureUserType
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.2INTEGER {mgmtUser(1), wlanUser(2), macFilter(3)}accessible-for-notifycurrent
bsnRemoteIPv4Address
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.3IpAddressaccessible-for-notifycurrent
bsnIpsecErrorCount
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.4Integer32accessible-for-notifycurrent
bsnIpsecSPI
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.5Integer32accessible-for-notifycurrent
bsnRemoteUdpPort
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.6Integer32 (0..65535)accessible-for-notifycurrent
bsnIkeAuthMethod
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.7Integer32accessible-for-notifycurrent
bsnIkeTotalInitFailures
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.8Integer32accessible-for-notifycurrent
bsnIkeTotalInitNoResponses
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.9Integer32accessible-for-notifycurrent
bsnIkeTotalRespFailures
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.10Integer32accessible-for-notifycurrent
bsnNotifiesSent
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.11Integer32accessible-for-notifycurrent
bsnNotifiesReceived
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.12Integer32accessible-for-notifycurrent
bsnSuiteInitFailures
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.13Integer32accessible-for-notifycurrent
bsnSuiteRespondFailures
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.14Integer32accessible-for-notifycurrent
bsnInitiatorCookie
OBJECT-TYPE
The initiator cookie used in an ISAKMP message, to be associated with a trap.
1.3.6.1.4.1.14179.2.6.2.15OCTET STRING (SIZE(8))accessible-for-notifycurrent
bsnResponderCookie
OBJECT-TYPE
The responder cookie used in an ISAKMP message, to be associated with a trap.
1.3.6.1.4.1.14179.2.6.2.16OCTET STRING (SIZE(8))accessible-for-notifycurrent
bsnIsakmpInvalidCookies
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.17Integer32accessible-for-notifycurrent
bsnCurrentRadiosCount
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.18Integer32accessible-for-notifycurrent
bsnLicenseRadioCount
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.19Integer32accessible-for-notifycurrent
bsnAPMacAddrTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.20MacAddressaccessible-for-notifycurrent
bsnAPNameTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.21DisplayStringaccessible-for-notifycurrent
bsnAPSlotIdTrapVariable
OBJECT-TYPE
Number of Radio Interfaces on the Airespace AP.
1.3.6.1.4.1.14179.2.6.2.22Integer32accessible-for-notifycurrent
bsnAPChannelNumberTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.23Integer32accessible-for-notifycurrent
bsnAPCoverageThresholdTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.24Integer32accessible-for-notifycurrent
bsnAPCoverageFailedClients
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.25Integer32accessible-for-notifycurrent
bsnAPCoverageTotalClients
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.26Integer32accessible-for-notifycurrent
bsnClientMacAddr
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.27MacAddressaccessible-for-notifycurrent
bsnClientRssi
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.28Integer32accessible-for-notifycurrent
bsnClientSnr
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.29Integer32accessible-for-notifycurrent
bsnInterferenceEnergyBeforeChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.30Integer32accessible-for-notifycurrent
bsnInterferenceEnergyAfterChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.31Integer32accessible-for-notifycurrent
bsnAPPortNumberTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.32Integer32accessible-for-notifycurrent
bsnMaxRogueCount
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.33Integer32accessible-for-notifycurrent
bsnStationMacAddress
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.34MacAddressaccessible-for-notifycurrent
bsnStationAPMacAddr
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.35MacAddressaccessible-for-notifycurrent
bsnStationAPIfSlotId
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.36INTEGER (0..15)accessible-for-notifycurrent
bsnStationReasonCode
OBJECT-TYPE
unspecified - Unspecified. previousAuthNotValid - Previous Authentication was not valid. deauthenticationLeaving - Leaving due to deauthentication. disassociationDueToInactivity - Disassociation due to Inactivity. disassociationAPBusy - Disassociation since AP was busy. class2FrameFromNonAuthStation - Class 2 frame from non authenticated station. class2FrameFromNonAssStation - Class 2 frame from non associated station. disassociationStaHasLeft - Station has left due to disassociation. staReqAssociationWithoutAuth - Station send association request without authentication. invalidInformationElement - Invalid information element. groupCipherInvalid - Invalid group Cipher. unicastCipherInvalid - Invalid unicast cipher. akmpInvalid - Invalid AKMP. unsupportedRsnVersion - Unsupported RSN version. invalidRsnIeCapabilities - Invalid RSN IE capabilities. cipherSuiteRejected - Cipher suite rejected. missingReasonCode - Reason code is missing. maxAssociatedClientsReached - Maximum allowed associated client number has reached. unSpecifiedQosFailure - Unsupported QOS failure. qosPolicyMismatch - Mismatch on QOS policy. inSufficientBandwidth - Insufficient bandwidth. inValidQosParams - Invalid QOS parameters.
1.3.6.1.4.1.14179.2.6.2.37INTEGER {unspecified(1), previousAuthNotValid(2), deauthenticationLeaving(3), disassociationDueToInactivity(4), disassociationAPBusy(5), class2FrameFromNonAuthStation(6), class2FrameFromNonAssStation(7), disassociationStaHasLeft(8), staReqAssociationWithoutAuth(9), invalidInformationElement(40), groupCipherInvalid(41), unicastCipherInvalid(42), akmpInvalid(43), unsupportedRsnVersion(44), invalidRsnIeCapabilities(45), cipherSuiteRejected(46), missingReasonCode(99), maxAssociatedClientsReached(101), unSpecifiedQosFailure(200), qosPolicyMismatch(201), inSufficientBandwidth(202), inValidQosParams(203), noOperation(1000), none(1001), deauthOrDisassocReq(1002), sessionAwareModuleInitiated(1003), l3authFail(1004), apInitiatedDelete(1005), bssidDown(1006), capwapDown(1007), connectTimeout(1008), mabFailed(1009), datapathFailure(1010), wlanChange(1011), vlanChange(1012), adminReset(1013), qosFailure(1014), keyExchangeTimeout(1015), groupKeyUpdateTimeout(1016), maxSaqueries(1017), restartPurge(1018), clientBlacklist(1019), interWncdRoamSuccess(1020), interWncdRoamFailure(1021), interCtrlRoamSuccess(1022), mobilityFailure(1023), sessionTimeout(1024), idleTimeout(1025), userRequest(1026), nasError(1027), serviceUnavailable(1028), mbssidDown(1029), mmTunnelDown(1030), dot11vSmartRoamFailed(1031), dot11vTimerTimeout(1032), dot11vAssocFailed(1033), ftAuthResponse(1034), saeAuthFailure(1035), dot11UnspecifiedFailure(1036), dot11FailureIgnoreReq(1037), dot11CcxQosAddtsNoBandwidth(1038), dot11CapsUnsupported(1039), dot11AssocDeniedUnspec(1040), dot11MaxSta(1041), dot11DeniedRates(1042), dot11PoorChannelConditions(1043), dot11InvalidQosParameter(1044), dot11InvalidIe(1045), dot11GroupCipherInvalid(1046), dot11UnicastCipherInvalid(1047), dot11AkmpInvalid(1048), dot11UnsupportedRsnVersion(1049), dot11InvalidRsnIeCapabilities(1050), dot11CipherSuiteRejected(1051), dot11DeniedHtCapabiliies(1052), dot11InvalidFtActionFrameCount(1053), dot11InvalidPmkid(1054), dot11InvalidMdie(1055), dot11InvalidFtie(1056), dot11CcxQosPolicy(1057), dot11CcxInsufficientBandwidth(1058), dot11CcxInvalidQosParameter(1059), dot11CcxNonOptimalAssociationChoice(1060), wiredIappDisassoc(1061), wiredWgbChange(1062), wiredVlanChange(1063), wiredWgbDelete(1064), avcReanchoring(1065), wgbClientDirectAssoc(1066), apUpgrade(1067), clientDhcpFailure(1068), clientEapTimeoutFailure(1069), client8021xFailure(1070), clientDeviceIdle(1071), clientCaptivePortalSecurityFailure(1072), clientDecryptionFailure(1073), clientInterfaceDisabled(1074), clientUserTriggeredDisassoc(1075), clientMiscReason(1076), clientUnknownReason(1077), clientPeerTriggered(1078), clientBeaconLoss(1079), clientEapIdTimeout(1080), clientDot1xTimeout(1081), keyMgmtInvalidFrame(1082), keyMgmtInstallBit(1083), keyMgmtErrorBit(1084), keyMgmtAckBit(1085), keyMgmtInvalidKey(1086), keyMgmtSecureBit(1087), keyMgmtKeyDescVer(1088), keyMgmtWrongReplayCounter(1089), keyMgmtNoMicBit(1090), keyMgmtMicValidation(1091), keyMgmtPtkComputation(1092), clientCredentialFailure(1093), lostCarrier(1094), reauthFailure(1095), portAdminDisabled(1096), supplicantRestart(1097), ipDownNoIp(1098), anchorThrottled(1099), anchorNoMemory(1100), anchorInvalidMbssid(1101), anchorCreateReqFail(1102), dbPopulateFail(1103), danglingCleanupTimer(1104), excludeConfig(1105), excludeAssocFail(1106), excludeDot11AuthFail(1107), excludeDot1xTimeout(1108), excludeDot1xAuthFail(1109), excludeWebAuthFail(1110), excludePolicyBindFail(1111), excludeIpTheft(1112), excludeMacTheft(1113), excludeMacAndIpTheft(1114), excludeQosPolicyFail(1115), excludeQosPolicyApSendFail(1116), excludeQosPolicyApBindFail(1117), excludeQosPolicyApUnbindFail(1118), excludeStaticIpAnchorFail(1119), excludeVlanFail(1120), excludeAclFail(1121), excludePuntAclFail(1122), excludeAccountingFail(1123), excludeCtsFail(1124), excludeFqdnNoDefFail(1125), excludeFqdnPostauthMismatchFail(1126), excludeFqdnPreauthMismatchFail(1127), excludeFqdnZeroGidFail(1128), excludeMiscFail(1129), excludeReauthFailure(1130), excludeWrongPsk(1131), excludePolicyFailure(1132), mnIdleTimeout(1133), mnClientAclMismatch(1134), mnApAuthStop(1135), mnAssocExpiredAtAp(1136), mn4wayHandshakeFailed(1137), mnDhcpTimeout(1138), mnReassocTimeout(1139), mnSaQueryTimeout(1140), mnIntraApRoam(1141), mnChannelSwitchAtAp(1142), mnDelBadAid(1143), mnDelRequest(1144), mnDelIntfReset(1145), mnDelAllOnSlot(1146), mnDelReaperRadio(1147), mnDelSlotDisable(1148), mnDelMicFail(1149), mnDelVlanDel(1150), mnDelChannelChange(1151), mnDelStopReassoc(1152), mnDelPakMaxRetry(1153), mnDelTxDeauth(1154), mnDelSensorStaTimeout(1155), mnDelAgeTimeout(1156), mnDelTxFailThold(1157), mnDelUplinkRcvTimeout(1158), mnDelSnsrScanNxtRadio(1159), mnDelSnsrScanOtherBssid(1160), aaaServerUnavailable(1161), aaaNotReady(1162), noDot1xAuthConfig(1163), abortReceived(1164), assocConnectTimeout(1165), macauthConnectTimeout(1166), l2authConnectTimeout(1167), l3authConnectTimeout(1168), mobilityConnectTimeout(1169), sIpAnchorConnectTimeout(1170), smSessionConnectTimeout(1171), iplearnConnectTimeout(1172), nackIfidExists(1173), radioDown(1174), fabricReject(1175), guestLanInvalidMbssid(1176), guestLanNoMemory(1177), guestLanCreateReqFail(1178), tunnelEogreReset(1179), tunnelEogreJoinFail(1180), tunnelEogreReconciliation(1181), wiredIdleTimeout(1182), ipUpdateTimeout(1183), remoteMobilityDelete(1184), saeAuthInAssociatedState(1185), nackIfidMismatch(1186), tunnelEogreInvalidVlan(1187), tunnelEogreEmptyDomain(1188), tunnelEogreInvalidDomain(1189), tunnelEogreDomainShut(1190), tunnelEogreInvalidGw(1191), tunnelEogreGwDown(1192), tunnelEogreFlexNoActiveGw(1193), tunnelEogreRuleMatch(1194), tunnelEogreAaaOverride(1195), tunnelEogreMspayload(1196), tunnelEogreHandoffError(1197), invalidPmkLen(1198), l3VlanOverrideConnectTimeout(1199), userTriggeredUnspecified(1200), userTriggeredPwroffWifioff(1201), userTriggeredConnectToAnotherSsid(1202), userTriggeredRemoveSsid(1203), userTriggeredAirplaneMode(1204), l2connectionUnspecified(1205), l2connectionAssociation(1206), fourWayHandshakeUnspecified(1207), keyM1Failure(1208), keyM3Failure(1209), m3M4KeyXchngTimeout(1210), dhcpFailUnspecified(1211), dhcpFailTimeout(1212), dhcpFailTimeoutAfterRoaming(1213), dhcpFailLeaseExpired(1214), dhcpFailNakInRenew(1215), dhcpFailRenewLeaseWrongIp(1216), dhcpFailInternalError(1217), eapFailUnspecified(1218), eapFailCodeFail(1219), eapFailInfoNotEntered(1220), eapFailMschapError(1221), eapFailSimAuthFail(1222), eapFailTimeout(1223), eapFailTlsCertError(1224), noInternetUnspecified(1225), noInternetDns(1226), noInternetArp(1227), exclusionPolicyTemplateFail(1228), mnDelAuthExpired(1229), mnDelDisassoc(1230), mnDelTxDisassoc(1231), fastroamMobilityFailure(1232), roamAcrossPolicyProfileDeny(1233), dot11AidAllocConflictReq(1234), zoneChange(1235), wlanIdAttrMismatch(1236), easypskAAAUnknown(1237), easypskUnspecified(1238), easypskPskMismatch(1239), easypskRadiusBusy(1240), easypskLimitReached(1241), easypskBadFrame(1242), easypskMissingParameter(1243), supplicantNameFail(1244), userNameFail(1245), serviceSetIdFail(1246), anchorVlanIdFail(1247), pskFail(1248), pskModeFail(1249), interimIntervalFail(1250), randomMac(1251), mnapiplearntimeout(1252), mnapbyflexgroupchange(1253), mnapeapollogoff(1254), mnapeapreqtimeout(1255), mnap4wayhandshakefailed(1256), mnapmicvalidation(1257), mnapwrongreplaycounter(1258), mnaptunneldown(1259), mnapinteraproam(1260), mnapunknownclient(1261), mnapreauthtimeout(1262), mnapcontidletimeout(1263), mnaprldpcleanup(1264), mnapintraswitchroam(1265), mnappemcleanup(1266), mnaprlancentralswitch(1267), mnaprlandpaddfail(1268), mnaprlandelete(1269), mnaprlaninactivetimeout(1270), mnaprlanmabfailure(1271), mnapclsmnomemory(1272), mnapclsmbssidmismatch(1273), mnapclsmdeletenoacl(1274), mnapclsmdeletenoparentwgb(1275), mnapclsmkeyplumbfail(1276), mnapclsmmeshkeyplumbfail(1277), mnapclsmdpaddfail(1278), mnapclsmauthrespreject(1279), mnapclsmauthrespsendfail(1280), mnapclsmassocrespsendfail(1281), mnapclsmassocrespwithfailurestatus(1282), mnapclsmwebauthtimerexpired(1283), mnapclsmdot1xtimerexpired(1284), mnapclsmdeauthdisassocsendfail(1285), mnapdrivereventclass3recv(1286), mnapdrivereventpspwhenunauth(1287), mnapdrivereventioctlerror(1288), mnapflexftfailure(1289), mnapclsmdriveraddfail(1290), mnapdriverclientnotfound(1291), mnapdrivermgmtpktallocfail(1292), mnapdriverinvalidcipher(1293), mnapdriverinvalidaid(1294), mnapdriverinvalidkey(1295), mnapdriverfwkeysetfailed(1296), mnapdriverinvalidhtvhtrates(1297), mnapdriverinvalidlegacyrates(1298), mnapdrivernooverlaplegacyrates(1299), mnapdrivermaxvhtstreams(1300), mnapdriveraidinuse(1301), mnapdriverassoctoomany(1302), mnapdrivercipherattachfail(1303), mnapdriveralgorithmmismatch(1304), mnapdriverinvalidkeylength(1305), mnapdriverinvalidkeyindex(1306), mnapdriverassocscbnotauthenticated(1307), mnapdriverstadbinitfailed(1308), mnapdriveraddingentryfailed(1309), mnapdriveraddingentryinfirmwarefailed(1310), mnapreasonapmax(1311), linklocalbridgevlanfail(1312), maxstaonap(1313), maxstaonvap(1314), maxstaonbssid(1315), maxstaonradio(1316), mnapmaxstaonap(1317), mnapmaxstaonbssid(1318), mnapmaxstaonradio(1319), pmkTimeoutOnSTA(1320), excessarprate(1321), excessndprate(1322), vrfvlanMismatch(1323), dpathencodefailed(1324)}accessible-for-notifycurrent
bsnStationBlacklistingReasonCode
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.38INTEGER {failed80211Auth(1), failedAssociation(2), ipTheft(3), failed8021xAuth(4), failedWebAuth(5)}accessible-for-notifycurrent
bsnStationUserName
OBJECT-TYPE
The user name of a client. This is used for the Client Associated trap. It may be null when not known.
1.3.6.1.4.1.14179.2.6.2.39DisplayStringaccessible-for-notifycurrent
bsnRogueAPOnWiredNetwork
OBJECT-TYPE
This is the flag used on the bsnRogueAPDetected trap to state if the rogue is found on the wired network. Typically, after a rogue is found, there may be another bsnRogueAPDetected trap that will have the value of this flag 1 if the rogue is detected on the wired network.
1.3.6.1.4.1.14179.2.6.2.40INTEGER {no(0), yes(1)}accessible-for-notifycurrent
bsnNavDosAttackSourceMacAddr
OBJECT-TYPE
MAC address generating the attack.
1.3.6.1.4.1.14179.2.6.2.41MacAddressaccessible-for-notifycurrent
bsnWlanIdTrapVariable
OBJECT-TYPE
WLAN ID used by the client when the WPA MIC error counter measure was activated.
1.3.6.1.4.1.14179.2.6.2.42INTEGER (1..517)accessible-for-notifycurrent
bsnUserIpAddress
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.43IpAddressaccessible-for-notifycurrent
bsnRogueAdhocMode
OBJECT-TYPE
This is the flag used on the bsnRogueAPDetected trap to state if the rogue found is an Adhoc rogue or it is an AP.
1.3.6.1.4.1.14179.2.6.2.44INTEGER {no(0), yes(1)}accessible-for-notifycurrent
bsnClearTrapVariable
OBJECT-TYPE
This is the flag is used to indicate if this is a clear trap for the original alert or not.
1.3.6.1.4.1.14179.2.6.2.45INTEGER {false(0), true(1)}accessible-for-notifycurrent
bsnDuplicateIpTrapVariable
OBJECT-TYPE
This field is used on the bsnDuplicateIpAddressReported trap to contain the IP Address in question when switch or an AP detected a duplicate IP Address on another machine.
1.3.6.1.4.1.14179.2.6.2.46IpAddressaccessible-for-notifycurrent
bsnDuplicateIpTrapClear
OBJECT-TYPE
This is the flag used to indicate clear state for the bsnDuplicateIpAddressReported trap.
1.3.6.1.4.1.14179.2.6.2.47INTEGER {false(0), true(1)}accessible-for-notifycurrent
bsnDuplicateIpReportedByAP
OBJECT-TYPE
This is the flag used on the bsnDuplicateIpAddressReported trap to indicate whether the switch or an AP detected a duplicate IP Address on another machine.
1.3.6.1.4.1.14179.2.6.2.48INTEGER {no(0), yes(1)}accessible-for-notifycurrent
bsnTrustedApRadioPolicyRequired
OBJECT-TYPE
This is the radio policy required by a trusted Rogue.
1.3.6.1.4.1.14179.2.6.2.49INTEGER {none(0), dot11b(1), dot11a(2), dot11bg(3)}accessible-for-notifycurrent
bsnTrustedApEncryptionUsed
OBJECT-TYPE
This is the encryption type used by a trusted Rogue.
1.3.6.1.4.1.14179.2.6.2.50INTEGER {none(0), open(1), wep(2), wpa(3)}accessible-for-notifycurrent
bsnTrustedApEncryptionRequired
OBJECT-TYPE
This is the encryption type required by a trusted Rogue.
1.3.6.1.4.1.14179.2.6.2.51INTEGER {none(0), open(1), wep(2), wpa(3)}accessible-for-notifycurrent
bsnTrustedApRadioPolicyUsed
OBJECT-TYPE
This is the radio policy used by a trusted Rogue.
1.3.6.1.4.1.14179.2.6.2.52INTEGER {none(0), dot11b(1), dot11a(2), dot11bg(3)}accessible-for-notifycurrent
bsnNetworkType
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.53INTEGER {dot11b(1), dot11a(2)}accessible-for-notifycurrent
bsnNetworkState
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.54INTEGER {disable(0), enable(1)}accessible-for-notifycurrent
bsnSignatureType
OBJECT-TYPE
Type of Signature whose attack is detected by the switch.
1.3.6.1.4.1.14179.2.6.2.55INTEGER {standard(0), custom(1)}accessible-for-notifycurrent
bsnSignatureName
OBJECT-TYPE
Name of the Signature whose attack is detected by the switch.
1.3.6.1.4.1.14179.2.6.2.56DisplayString (SIZE(0..20))accessible-for-notifycurrent
bsnSignatureDescription
OBJECT-TYPE
Description of the Signature whose attack is detected by the switch.
1.3.6.1.4.1.14179.2.6.2.57DisplayString (SIZE(0..100))accessible-for-notifycurrent
bsnImpersonatedAPMacAddr
OBJECT-TYPE
MAC Address of the AP impersonated by another AP.
1.3.6.1.4.1.14179.2.6.2.58MacAddressaccessible-for-notifycurrent
bsnTrustedApPreambleUsed
OBJECT-TYPE
The Preamble on this detecting AP.
1.3.6.1.4.1.14179.2.6.2.59INTEGER {none(0), short(1), long(2)}accessible-for-notifycurrent
bsnTrustedApPreambleRequired
OBJECT-TYPE
The Preamble on this detecting AP.
1.3.6.1.4.1.14179.2.6.2.60INTEGER {none(0), short(1), long(2)}accessible-for-notifycurrent
bsnSignatureAttackPreced
OBJECT-TYPE
The preced in the standard/custom signature list.
1.3.6.1.4.1.14179.2.6.2.61INTEGER (0..65535)accessible-for-notifycurrent
bsnSignatureAttackFrequency
OBJECT-TYPE
The preced in the standard/custom signature list.
1.3.6.1.4.1.14179.2.6.2.62INTEGER (0..65535)accessible-for-notifycurrent
bsnSignatureAttackChannel
OBJECT-TYPE
The preced in the standard/custom signature list.
1.3.6.1.4.1.14179.2.6.2.63INTEGER (0..65535)accessible-for-notifycurrent
bsnSignatureAttackerMacAddress
OBJECT-TYPE
The MAC address of the Attacker's mac-interface.
1.3.6.1.4.1.14179.2.6.2.64MacAddressaccessible-for-notifycurrent
bsnLicenseKeyTrapVariable
OBJECT-TYPE
This is the license key that has been found to be deleted, expired or is mismatched causing AP functionality to be disabled on the switch.
1.3.6.1.4.1.14179.2.6.2.65OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
bsnApFunctionalityDisableReasonCode
OBJECT-TYPE
This is the reason why the AP functionality was disabled on the switch. It could be either expiry or deletion or mismatch found of the license key.
1.3.6.1.4.1.14179.2.6.2.66INTEGER {unknown(0), licenseKeyExpired(1), licenseKeyDeleted(2), licenseKeyFeatureMismatch(3)}accessible-for-notifycurrent
bsnLicenseKeyFeatureSetTrapVariable
OBJECT-TYPE
This is the switch feature set whose license key has expired or is deleted or is mismatched. To enable the AP functionality again, the license key for this feature set should be re-configured.
1.3.6.1.4.1.14179.2.6.2.67INTEGER {wps(1), all(2)}accessible-for-notifycurrent
bsnApRegulatoryDomain
OBJECT-TYPE
The regulatory domain configured on an AP.
1.3.6.1.4.1.14179.2.6.2.68INTEGER {a(0), e(1), i(6), j(9), c(16), n(21), k(32), p(33), s(34), t(35), r(48), notavailable(65535)}accessible-for-notifycurrent
bsnAPAuthorizationFailureCause
OBJECT-TYPE
This denotes the reason for AP authorization failure. [entrydoesnotexist]: The AP has not been added to Controller's AP Authorization List. [keymismatch]: The key entry in Controller's AP Authorization list does not match the SHA1 key received from the AP. [invalidCert]: Could not verify the self signed Certificate. [entryIsMIC]: AP has Self Signed Certificate where as in Controller AP Authorization list has Manufactured Installed Certificate [aaaEntryDoesNotExist]: RADIUS authorization for the AP failed. [unknown]: Default.
1.3.6.1.4.1.14179.2.6.2.69INTEGER {unknown(0), keymismatch(1), entrydoesnotexist(2), invalidCertifcate(3), entryIsMIC(4), aaaEntryDoesNotExist(5)}accessible-for-notifycurrent
bsnAPIfUpDownCause
OBJECT-TYPE
This denotes the reason for AP If up or down normal - radio Failure - radio failed radioLowPower - AP is not able draw enough power. maxRetransmission - max retransmission of AP Reached. echoTimeout - heartbeat timeout. configAP - admin enable/disable AP configRadio - admin enable/disable config radio configNetwork - admin enable/disable network adminConfigured - admin configuration missedRekey - Missed Rekey detectingInLinePower - Detecting in-line power newDiscovery - New Discovery
1.3.6.1.4.1.14179.2.6.2.70INTEGER {unknown(0), radioFailure(1), radioLowPower(2), maxRetransmission(3), echoTimeout(4), configAP(5), configRadio(6), configNetwork(7), adminConfigured(8), missedRekey(9), detectingInLinePower(10), newDiscovery(11)}accessible-for-notifycurrent
bsnAPInvalidRadioType
OBJECT-TYPE
Radio types which are not supported by controller.
1.3.6.1.4.1.14179.2.6.2.71INTEGER {unsupportedRadio(0)}accessible-for-notifycurrent
locationNotifyContent
OBJECT-TYPE
This is the content of the notification.
1.3.6.1.4.1.14179.2.6.2.72OCTET STRING (SIZE(0..512))accessible-for-notifycurrent
bsnSignatureMacInfo
OBJECT-TYPE
This object defines the pattern followed by the LWAPP APs to perform signature analysis with this signature and report the results to the Controller.
1.3.6.1.4.1.14179.2.6.2.73BsnTxtSignatureMacInfoaccessible-for-notifycurrent
bsnImpersonatingSourceMacAddr
OBJECT-TYPE
This is the source mac address which is impersonating the AP.
1.3.6.1.4.1.14179.2.6.2.74MacAddressaccessible-for-notifycurrent
bsnAPPreviousChannelNumberTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.83Integer32accessible-for-notifycurrent
bsnAPReasonCodeTrapVariable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.84Bits {noReason(0), signal(1), noise(2), interference(3), load(4), radar(5), deviceAware(6), majorSIAQEvent(7)}accessible-for-notifycurrent
bsnNoiseBeforeChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.85Integer32accessible-for-notifycurrent
bsnNoiseAfterChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.86Integer32accessible-for-notifycurrent
bsnInterferenceBeforeChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.87Integer32accessible-for-notifycurrent
bsnInterferenceAfterChannelUpdate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.6.2.88Integer32accessible-for-notifycurrent
bsnTraps
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.6.3
bsnUtility
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.7
bsnSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.7.1
bsnSyslogEnable
OBJECT-TYPE
1.3.6.1.4.1.14179.2.7.1.1INTEGER {no(0), yes(1)}read-writecurrent
bsnSyslogRemoteAddress
OBJECT-TYPE
This would be the IP Address or host name
1.3.6.1.4.1.14179.2.7.1.2DisplayStringread-writecurrent
bsnPing
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.7.2
bsnPingTestTable
OBJECT-TYPE
PingTest Table
1.3.6.1.4.1.14179.2.7.2.1not-accessiblecurrent
bsnPingTestEntry
OBJECT-TYPE
An Entry (conceptual row) in the bsnPingTest Table.
1.3.6.1.4.1.14179.2.7.2.1.1not-accessiblecurrent
bsnPingTestId
OBJECT-TYPE
Test ID
1.3.6.1.4.1.14179.2.7.2.1.1.1Integer32 (0..24)read-createcurrent
bsnPingTestIPAddress
OBJECT-TYPE
Ip Address to ping
1.3.6.1.4.1.14179.2.7.2.1.1.2IpAddressread-createcurrent
bsnPingTestSendCount
OBJECT-TYPE
Number of bytes sent
1.3.6.1.4.1.14179.2.7.2.1.1.3Integer32 (1..20)read-createcurrent
bsnPingTestReceivedCount
OBJECT-TYPE
Number of bytes received.
1.3.6.1.4.1.14179.2.7.2.1.1.4Integer32 (1..20)read-onlycurrent
bsnPingTestStatus
OBJECT-TYPE
Status of the ping test
1.3.6.1.4.1.14179.2.7.2.1.1.5INTEGER {inprogress(1), complete(2)}read-onlycurrent
bsnPingTestMaxTimeInterval
OBJECT-TYPE
Maximum time interval in msec.
1.3.6.1.4.1.14179.2.7.2.1.1.6Unsigned32read-onlycurrent
bsnPingTestMinTimeInterval
OBJECT-TYPE
Minimum time interval in msec.
1.3.6.1.4.1.14179.2.7.2.1.1.7Unsigned32read-onlycurrent
bsnPingTestAvgTimeInterval
OBJECT-TYPE
Average time interval in msec.
1.3.6.1.4.1.14179.2.7.2.1.1.8Unsigned32read-onlycurrent
bsnPingTestRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.7.2.1.1.25RowStatusread-createcurrent
bsnLinkTest
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.7.3
bsnLinkTestTable
OBJECT-TYPE
LinkTest Table
1.3.6.1.4.1.14179.2.7.3.1not-accessibledeprecated
bsnLinkTestEntry
OBJECT-TYPE
An Entry (conceptual row) in the bsnLinkTest Table.
1.3.6.1.4.1.14179.2.7.3.1.1not-accessibledeprecated
bsnLinkTestId
OBJECT-TYPE
Link Test ID
1.3.6.1.4.1.14179.2.7.3.1.1.1Integer32 (0..24)read-createdeprecated
bsnLinkTestMacAddress
OBJECT-TYPE
MAC Address of link to test
1.3.6.1.4.1.14179.2.7.3.1.1.2MacAddressread-createdeprecated
bsnLinkTestSendPktCount
OBJECT-TYPE
Number of packets sent.
1.3.6.1.4.1.14179.2.7.3.1.1.3Integer32 (1..20)read-createdeprecated
bsnLinkTestSendPktLength
OBJECT-TYPE
Length of sent packet
1.3.6.1.4.1.14179.2.7.3.1.1.4Integer32 (1..2000)read-createdeprecated
bsnLinkTestReceivedPktCount
OBJECT-TYPE
Number of received packets.
1.3.6.1.4.1.14179.2.7.3.1.1.5Integer32read-onlydeprecated
bsnLinkTestClientRSSI
OBJECT-TYPE
Client RSSI value of link.
1.3.6.1.4.1.14179.2.7.3.1.1.6Integer32read-onlydeprecated
bsnLinkTestLocalSNR
OBJECT-TYPE
Local SNR of the link
1.3.6.1.4.1.14179.2.7.3.1.1.7Integer32read-onlydeprecated
bsnLinkTestLocalRSSI
OBJECT-TYPE
Local RSSI of the link.
1.3.6.1.4.1.14179.2.7.3.1.1.8Integer32read-onlydeprecated
bsnLinkTestStatus
OBJECT-TYPE
Status of the link test.
1.3.6.1.4.1.14179.2.7.3.1.1.9INTEGER {inprogress(1), complete(2)}read-onlydeprecated
bsnLinkTestRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.7.3.1.1.30RowStatusread-createdeprecated
bsnMobility
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.8
bsnMobilityConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.8.1
bsnMobilityProtocolPortNum
OBJECT-TYPE
Port Number on which mobility Protocol runs
1.3.6.1.4.1.14179.2.8.1.1Integer32read-writecurrent
bsnMobilityDynamicDiscovery
OBJECT-TYPE
Statically Configured is always enabled if members are defined. To further enable rrm discovery, learned discovery, broadcast discovery, enable/disable this attribute.
1.3.6.1.4.1.14179.2.8.1.3INTEGER {disable(0), enable(1)}read-writecurrent
bsnMobilityStatsReset
OBJECT-TYPE
Reset mobility statistics by setting this atribute to resetNow. If you try to read this attribute value will always be 0.
1.3.6.1.4.1.14179.2.8.1.4INTEGER {default(0), resetNow(1)}read-writecurrent
bsnMobilityGroupMembersTable
OBJECT-TYPE
MWAR List (statically configured members of the mobility group)
1.3.6.1.4.1.14179.2.8.1.10not-accessiblecurrent
bsnMobilityGroupMembersEntry
OBJECT-TYPE
An Entry (conceptual row) in the bsnMobilityGroupMembers Table.
1.3.6.1.4.1.14179.2.8.1.10.1not-accessiblecurrent
bsnMobilityGroupMemberMacAddress
OBJECT-TYPE
Member switch MAC Address
1.3.6.1.4.1.14179.2.8.1.10.1.1MacAddressread-createcurrent
bsnMobilityGroupMemberIPAddress
OBJECT-TYPE
Member switch IP Address
1.3.6.1.4.1.14179.2.8.1.10.1.2IpAddressread-createcurrent
bsnMobilityGroupMemberGroupName
OBJECT-TYPE
Member's group name. If left empty while adding a new group member, this assumes the default mobility group name of the switch.
1.3.6.1.4.1.14179.2.8.1.10.1.3DisplayString (SIZE(0..31))read-createcurrent
bsnMobilityGroupMemberRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.8.1.10.1.22RowStatusread-createcurrent
bsnMobilityAnchorsTable
OBJECT-TYPE
Statically configured mobility anchors
1.3.6.1.4.1.14179.2.8.1.11not-accessiblecurrent
bsnMobilityAnchorsEntry
OBJECT-TYPE
An Entry (conceptual row) in the bsnMobilityAnchorsTable Table.
1.3.6.1.4.1.14179.2.8.1.11.1not-accessiblecurrent
bsnMobilityAnchorWlanSsid
OBJECT-TYPE
Local wlan-ssid to connect to Guest/Anchor switch
1.3.6.1.4.1.14179.2.8.1.11.1.1DisplayString (SIZE(1..32))read-createcurrent
bsnMobilityAnchorSwitchIPAddress
OBJECT-TYPE
Guest/Anchor switch IP Address
1.3.6.1.4.1.14179.2.8.1.11.1.2IpAddressread-createcurrent
bsnMobilityAnchorRowStatus
OBJECT-TYPE
Row Status
1.3.6.1.4.1.14179.2.8.1.11.1.20RowStatusread-createcurrent
bsnMobilityStats
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.8.2
bsnTotalHandoffRequests
OBJECT-TYPE
Total handoff requests
1.3.6.1.4.1.14179.2.8.2.1Counter32read-onlycurrent
bsnTotalHandoffs
OBJECT-TYPE
Total handoffs
1.3.6.1.4.1.14179.2.8.2.2Counter32read-onlycurrent
bsnCurrentExportedClients
OBJECT-TYPE
Current exported client count
1.3.6.1.4.1.14179.2.8.2.3Counter32read-onlycurrent
bsnTotalExportedClients
OBJECT-TYPE
Total exported client count
1.3.6.1.4.1.14179.2.8.2.4Counter32read-onlycurrent
bsnCurrentImportedClients
OBJECT-TYPE
Current Imported client count
1.3.6.1.4.1.14179.2.8.2.5Counter32read-onlycurrent
bsnTotalImportedClients
OBJECT-TYPE
Total Imported client count
1.3.6.1.4.1.14179.2.8.2.6Counter32read-onlycurrent
bsnTotalHandoffErrors
OBJECT-TYPE
Total handoff errors
1.3.6.1.4.1.14179.2.8.2.7Counter32read-onlycurrent
bsnTotalCommunicationErrors
OBJECT-TYPE
Total communication errors
1.3.6.1.4.1.14179.2.8.2.8Counter32read-onlycurrent
bsnMobilityGroupDirectoryTable
OBJECT-TYPE
MWAR List (statically configured members of the mobility group)
1.3.6.1.4.1.14179.2.8.2.9not-accessiblecurrent
bsnMobilityGroupDirectoryEntry
OBJECT-TYPE
An Entry (conceptual row) in the bsnMobilityGroupDirectory Table.
1.3.6.1.4.1.14179.2.8.2.9.1not-accessiblecurrent
bsnGroupDirectoryMemberIPAddress
OBJECT-TYPE
Mwar Ip Address
1.3.6.1.4.1.14179.2.8.2.9.1.1IpAddressread-onlycurrent
bsnGroupDirectoryMemberMacAddress
OBJECT-TYPE
Mwar Mac Address
1.3.6.1.4.1.14179.2.8.2.9.1.2MacAddressread-onlycurrent
bsnGroupDirectoryDicoveryType
OBJECT-TYPE
Discovery type of the Group Directory.
1.3.6.1.4.1.14179.2.8.2.9.1.3INTEGER {static(1), rrm(2), broadcast(3), learned(4)}read-onlycurrent
bsnMemberCurrentAnchoredClients
OBJECT-TYPE
Current anchored client count
1.3.6.1.4.1.14179.2.8.2.9.1.4Counter32read-onlycurrent
bsnMemberTotalAnchoredClients
OBJECT-TYPE
Total anchored client count
1.3.6.1.4.1.14179.2.8.2.9.1.5Counter32read-onlycurrent
bsnMemberCurrentExportedClients
OBJECT-TYPE
Current exported client count
1.3.6.1.4.1.14179.2.8.2.9.1.6Counter32read-onlycurrent
bsnMemberTotalExportedClients
OBJECT-TYPE
Total exported client count
1.3.6.1.4.1.14179.2.8.2.9.1.7Counter32read-onlycurrent
bsnMemberCurrentImportedClients
OBJECT-TYPE
Current Imported client count
1.3.6.1.4.1.14179.2.8.2.9.1.8Counter32read-onlycurrent
bsnMemberTotalImportedClients
OBJECT-TYPE
Total Imported client count
1.3.6.1.4.1.14179.2.8.2.9.1.9Counter32read-onlycurrent
bsnMemberTotalHandoffErrors
OBJECT-TYPE
Total handoff errors
1.3.6.1.4.1.14179.2.8.2.9.1.10Counter32read-onlycurrent
bsnMemberTotalCommunicationErrors
OBJECT-TYPE
Total Communication errors
1.3.6.1.4.1.14179.2.8.2.9.1.30Counter32read-onlycurrent
bsnTotalReceiveErrors
OBJECT-TYPE
Total receive errors
1.3.6.1.4.1.14179.2.8.2.10Counter32read-onlycurrent
bsnTotalTransmitErrors
OBJECT-TYPE
Total Transmit errors
1.3.6.1.4.1.14179.2.8.2.11Counter32read-onlycurrent
bsnTotalResponsesRetransmitted
OBJECT-TYPE
Total Responses Retransmitted
1.3.6.1.4.1.14179.2.8.2.12Counter32read-onlycurrent
bsnTotalHandoffEndRequestsReceived
OBJECT-TYPE
Total Handoff End Requests Received
1.3.6.1.4.1.14179.2.8.2.13Counter32read-onlycurrent
bsnTotalStateTransitionsDisallowed
OBJECT-TYPE
Total State Transitions Disallowed
1.3.6.1.4.1.14179.2.8.2.14Counter32read-onlycurrent
bsnTotalResourceErrors
OBJECT-TYPE
Total Resource Errors
1.3.6.1.4.1.14179.2.8.2.15Counter32read-onlycurrent
bsnTotalHandoffRequestsSent
OBJECT-TYPE
Total Handoff Requests Sent
1.3.6.1.4.1.14179.2.8.2.16Counter32read-onlycurrent
bsnTotalHandoffRepliesReceived
OBJECT-TYPE
Total Handoff Replies Received
1.3.6.1.4.1.14179.2.8.2.17Counter32read-onlycurrent
bsnTotalHandoffAsLocalReceived
OBJECT-TYPE
Total Handoffs As Local Received
1.3.6.1.4.1.14179.2.8.2.18Counter32read-onlycurrent
bsnTotalHandoffAsForeignReceived
OBJECT-TYPE
Total Handoffs As Foreign Received
1.3.6.1.4.1.14179.2.8.2.19Counter32read-onlycurrent
bsnTotalHandoffDeniesReceived
OBJECT-TYPE
Total Handoff Denies Received
1.3.6.1.4.1.14179.2.8.2.20Counter32read-onlycurrent
bsnTotalAnchorRequestsSent
OBJECT-TYPE
Total Anchor Requests Sent
1.3.6.1.4.1.14179.2.8.2.21Counter32read-onlycurrent
bsnTotalAnchorDenyReceived
OBJECT-TYPE
Total Anchor Deny Received
1.3.6.1.4.1.14179.2.8.2.22Counter32read-onlycurrent
bsnTotalAnchorGrantReceived
OBJECT-TYPE
Total Anchor Grant Received
1.3.6.1.4.1.14179.2.8.2.23Counter32read-onlycurrent
bsnTotalAnchorTransferReceived
OBJECT-TYPE
Total Anchor Transfer Received
1.3.6.1.4.1.14179.2.8.2.24Counter32read-onlycurrent
bsnTotalHandoffRequestsIgnored
OBJECT-TYPE
Total Handoff Requests Ignored
1.3.6.1.4.1.14179.2.8.2.25Counter32read-onlycurrent
bsnTotalPingPongHandoffRequestsDropped
OBJECT-TYPE
Total Ping Pong Handoff Requests Dropped
1.3.6.1.4.1.14179.2.8.2.26Counter32read-onlycurrent
bsnTotalHandoffRequestsDropped
OBJECT-TYPE
Total Handoff Requests Dropped
1.3.6.1.4.1.14179.2.8.2.27Counter32read-onlycurrent
bsnTotalHandoffRequestsDenied
OBJECT-TYPE
Total Handoff Requests Denied
1.3.6.1.4.1.14179.2.8.2.28Counter32read-onlycurrent
bsnTotalClientHandoffAsLocal
OBJECT-TYPE
Total Client Handoffs As Local
1.3.6.1.4.1.14179.2.8.2.29Counter32read-onlycurrent
bsnTotalClientHandoffAsForeign
OBJECT-TYPE
Total Client Handoffs As Foreign
1.3.6.1.4.1.14179.2.8.2.30Counter32read-onlycurrent
bsnTotalAnchorRequestsReceived
OBJECT-TYPE
Total Anchor Requests Received
1.3.6.1.4.1.14179.2.8.2.31Counter32read-onlycurrent
bsnTotalAnchorRequestsDenied
OBJECT-TYPE
Total Anchor Requests Denied
1.3.6.1.4.1.14179.2.8.2.32Counter32read-onlycurrent
bsnTotalAnchorRequestsGranted
OBJECT-TYPE
Total Anchor Requests Granted
1.3.6.1.4.1.14179.2.8.2.33Counter32read-onlycurrent
bsnTotalAnchorTransferred
OBJECT-TYPE
Total Anchor Transferred
1.3.6.1.4.1.14179.2.8.2.34Counter32read-onlycurrent
bsnTotalHandoffRequestsReceived
OBJECT-TYPE
Total Handoff Requests Received
1.3.6.1.4.1.14179.2.8.2.35Counter32read-onlycurrent
bsnIpsec
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.9
bsnWrasIpsecCACertificate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.9.1OCTET STRING (SIZE(0..4096))read-onlycurrent
bsnWrasIpsecCACertificateUpdate
OBJECT-TYPE
Note this attribute is for updating the certificate If you try to read it, it will always be ***
1.3.6.1.4.1.14179.2.9.2OCTET STRING (SIZE(0..4096))read-writecurrent
bsnWrasIpsecCertTable
OBJECT-TYPE
A table of Certificates.
1.3.6.1.4.1.14179.2.9.3not-accessiblecurrent
bsnWrasIpsecCertEntry
OBJECT-TYPE
Each entry contains a specific certificate.
1.3.6.1.4.1.14179.2.9.3.1not-accessiblecurrent
bsnWrasIpsecCertName
OBJECT-TYPE
The name assigned to this set of IKE Certificates.
1.3.6.1.4.1.14179.2.9.3.1.1DisplayString (SIZE(0..80))read-createcurrent
bsnWrasIpsecCertificateUpdate
OBJECT-TYPE
If you try to read this it will always be ***
1.3.6.1.4.1.14179.2.9.3.1.2OCTET STRING (SIZE(0..4096))read-createcurrent
bsnWrasIpsecCertificate
OBJECT-TYPE
1.3.6.1.4.1.14179.2.9.3.1.3OCTET STRING (SIZE(0..4096))read-onlycurrent
bsnWrasIpsecCertPassword
OBJECT-TYPE
1.3.6.1.4.1.14179.2.9.3.1.4OCTET STRING (SIZE(0..1500))read-createcurrent
bsnWrasIpsecCertStatus
OBJECT-TYPE
A row status type for the IKE Cert Entry.
1.3.6.1.4.1.14179.2.9.3.1.24RowStatusread-createcurrent
bsnAPGroupsVlanConfig
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.10
bsnAPGroupsVlanFeature
OBJECT-TYPE
When enabled, Site Specific WLAN feature is enforced.
1.3.6.1.4.1.14179.2.10.1INTEGER {disable(0), enable(1)}read-writecurrent
bsnAPGroupsVlanTable
OBJECT-TYPE
Wireless Sites Table.
1.3.6.1.4.1.14179.2.10.2not-accessiblecurrent
bsnAPGroupsVlanEntry
OBJECT-TYPE
An entry in bsnAPGroupsVlanTable.
1.3.6.1.4.1.14179.2.10.2.1not-accessiblecurrent
bsnAPGroupsVlanName
OBJECT-TYPE
The string is an unique identifier/name assigned to a site.
1.3.6.1.4.1.14179.2.10.2.1.1OCTET STRING (SIZE(1..32))read-createcurrent
bsnAPGroupsVlanDescription
OBJECT-TYPE
Description about the site.
1.3.6.1.4.1.14179.2.10.2.1.2OCTET STRING (SIZE(0..32))read-createcurrent
bsnAPGroupsVlanRowStatus
OBJECT-TYPE
Row Status for creation/deletion of entries in bsnAPGroupsVlanTable
1.3.6.1.4.1.14179.2.10.2.1.20RowStatusread-createcurrent
bsnAPGroupsVlanMappingTable
OBJECT-TYPE
A table for the WLAN-interace-mappings allowed for each configured site. Each site can have a set of WLANs associated with it.
1.3.6.1.4.1.14179.2.10.3not-accessibledeprecated
bsnAPGroupsVlanMappingEntry
OBJECT-TYPE
An entry in bsnAPGroupsVlanMappingTable.
1.3.6.1.4.1.14179.2.10.3.1not-accessibledeprecated
bsnAPGroupsVlanMappingSsid
OBJECT-TYPE
When an AP is associated with a site, and the site has an associated set of WLANs, then only those WLANs are beamed by the AP. Here 'bsnAPGroupsVlanMappingSsid' is the wlan to be used when a client connects on this AP.
1.3.6.1.4.1.14179.2.10.3.1.1DisplayString (SIZE(1..32))read-createdeprecated
bsnAPGroupsVlanMappingInterfaceName
OBJECT-TYPE
When an AP is associated with a site, and the site has an associated set of WLANs, then only those WLANs are beamed by the AP. Here 'bsnAPGroupsVlanMappingInterfaceName' is the interface to be used when a client connects to the 'bsnAPGroupsVlanMappingSsid' WLAN on this AP.
1.3.6.1.4.1.14179.2.10.3.1.2OCTET STRING (SIZE(1..32))read-createdeprecated
bsnAPGroupsVlanMappingRowStatus
OBJECT-TYPE
Row Status for creation/deletion of WLAN-interface-mappings asscoiated with sites.
1.3.6.1.4.1.14179.2.10.3.1.20RowStatusread-createdeprecated
bsnWrasGroups
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.50
bsnWrasCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.14179.2.51

Notifications

NameOIDStatus
bsnDot11StationDisassociate
NOTIFICATION-TYPE
The disassociate notification shall be sent when the Station sends a Disassociation frame. The value of the notification shall include the MAC address of the MAC to which the Disassociation frame was sent and the reason for the disassociation
1.3.6.1.4.1.14179.2.6.3.1current
bsnDot11StationDeauthenticate
NOTIFICATION-TYPE
The deauthenticate notification shall be sent when the Station sends a Deauthentication frame. The value of the notification shall include the MAC address of the MAC to which the Deauthentication frame was sent and the reason for the deauthentication.
1.3.6.1.4.1.14179.2.6.3.2current
bsnDot11StationAuthenticateFail
NOTIFICATION-TYPE
The authenticate failure notification shall be sent when the Station sends an Authentication frame with a status code other than 'successful'. The value of the notification shall include the MAC address of the MAC to which the Authentication frame was sent and the reason for the authentication failure.
1.3.6.1.4.1.14179.2.6.3.3current
bsnDot11StationAssociateFail
NOTIFICATION-TYPE
The associate failure notification shall be sent when the Station sends an Association frame with a status code other than 'successful'. The value of the notification shall include the MAC address of the MAC to which the Authentication frame was sent and the reason for the authentication failure.
1.3.6.1.4.1.14179.2.6.3.4current
bsnAPUp
NOTIFICATION-TYPE
When Airespace AP operation status goes up this trap will be sent
1.3.6.1.4.1.14179.2.6.3.5obsolete
bsnAPDown
NOTIFICATION-TYPE
When Airespace AP operation status goes down this trap will be sent
1.3.6.1.4.1.14179.2.6.3.6obsolete
bsnAPAssociated
NOTIFICATION-TYPE
When Airespace AP Associates to a Airespace Switch, AP associated notification will be sent with dot3 MAC address of Airespace AP.This will help management system to discover Airespace AP and add to system.
1.3.6.1.4.1.14179.2.6.3.7deprecated
bsnAPDisassociated
NOTIFICATION-TYPE
When Airespace AP disassociates from Airespace Switch, AP disassociated notification will be sent with dot3 MAC address of Airespace AP management system to remove Airespace AP from this Airespace Switch
1.3.6.1.4.1.14179.2.6.3.8current
bsnAPIfUp
NOTIFICATION-TYPE
When Airespace AP's interface's operation status goes up this trap will be sent
1.3.6.1.4.1.14179.2.6.3.9deprecated
bsnAPIfDown
NOTIFICATION-TYPE
When Airespace AP's interface's operation status goes down this trap will be sent.
1.3.6.1.4.1.14179.2.6.3.10deprecated
bsnAPLoadProfileFailed
NOTIFICATION-TYPE
When LOAD Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.11current
bsnAPNoiseProfileFailed
NOTIFICATION-TYPE
When Noise Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.12current
bsnAPInterferenceProfileFailed
NOTIFICATION-TYPE
When Interference Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.13current
bsnAPCoverageProfileFailed
NOTIFICATION-TYPE
When Coverage Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.14current
bsnAPCurrentTxPowerChanged
NOTIFICATION-TYPE
Whenever dynamic algorithms are running and bsnAPIfPhyPowerAutomaticOn is true, Airespace AP Interface's CurrentTxPower might get updated by algorithm. When this occurs notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF along with the currentTxPower for this Airespace AP IF
1.3.6.1.4.1.14179.2.6.3.15current
bsnAPCurrentChannelChanged
NOTIFICATION-TYPE
Whenever dynamic algorithms are running and bsnAPIfPhyChannelAutomaticOn is true, Airespace AP Interface's CurrentChannel might get updated by algorithm. When this occurs notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF along with the currentChannel for this Airespace AP IF
1.3.6.1.4.1.14179.2.6.3.16current
bsnRrmDot11aGroupingDone
NOTIFICATION-TYPE
When Grouping is done, this notification will be sent from the previous Group Leader where grouping algorithm was run. It has MAC address of the new Group Leader.
1.3.6.1.4.1.14179.2.6.3.21current
bsnRrmDot11bGroupingDone
NOTIFICATION-TYPE
When Grouping is done, this notification will be sent from the previous Group Leader where grouping algorithm was run. It has MAC address of the new Group Leader.
1.3.6.1.4.1.14179.2.6.3.22current
bsnConfigSaved
NOTIFICATION-TYPE
When configuration is save either from CLI or web interface This trap will be sent to inform NMS to do refresh
1.3.6.1.4.1.14179.2.6.3.23current
bsnDot11EssCreated
NOTIFICATION-TYPE
Whenever a new Ess (WLAN) is created, this notification will be sent along with EssIndex
1.3.6.1.4.1.14179.2.6.3.24current
bsnDot11EssDeleted
NOTIFICATION-TYPE
Whenever a Ess (WLAN)is deleted, this notification will be sent along with EssIndex
1.3.6.1.4.1.14179.2.6.3.25current
bsnRADIUSServerNotResponding
NOTIFICATION-TYPE
This trap is to indicate that no RADIUS server(s) are responding to authentication requests sent by the RADIUS client within the MWAR device(Switch).
1.3.6.1.4.1.14179.2.6.3.26current
bsnAuthenticationFailure
NOTIFICATION-TYPE
This trap is to inform that client authentication failure has occured at MWAR(Switch). This could be cli/web user, wlan user, or Mac Authorized user. ServiceType will indicate which type of user it is and userName will be cli/web/wlan userName or MacAddress of Mac Authorized User
1.3.6.1.4.1.14179.2.6.3.27current
bsnIpsecEspAuthFailureTrap
NOTIFICATION-TYPE
IPsec packets with invalid hashes were found in an inbound ESP SA. The total number of authentication errors accumulated is sent for the specific row of the ipsecSaEspInTable table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
1.3.6.1.4.1.14179.2.6.3.28current
bsnIpsecEspReplayFailureTrap
NOTIFICATION-TYPE
IPsec packets with invalid sequence numbers were found in an inbound ESP SA. The total number of replay errors accumulated is sent for the specific row of the ipsecSaEspInTable table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
1.3.6.1.4.1.14179.2.6.3.29current
bsnIpsecEspInvalidSpiTrap
NOTIFICATION-TYPE
A packet with an unknown SPI was detected from the specified peer with the specified SPI using the specified protocol. The destination address of the received packet is specified by ipsecLocalAddress. The value ifIndex may be 0 if this optional linkage is unsupported. If the object ipsecSecurityProtocol has the value for IPcomp, then the ipsecSPI object is the CPI of the packet. Implementations SHOULD send one trap per peer (within a reasonable time period), rather than sending one trap per packet.
1.3.6.1.4.1.14179.2.6.3.31current
bsnIpsecIkeNegFailure
NOTIFICATION-TYPE
An attempt to negotiate a phase 1 IKE SA failed. The notification counts are also sent as part of the trap, along with the current value of the total negotiation error counters for ISAKMP.
1.3.6.1.4.1.14179.2.6.3.33current
bsnIpsecSuiteNegFailure
NOTIFICATION-TYPE
An attempt to negotiate a phase 2 SA suite for the specified selector failed. The current total failure counts are passed as well as the notification type counts for the notify involved in the failure.
1.3.6.1.4.1.14179.2.6.3.34current
bsnIpsecInvalidCookieTrap
NOTIFICATION-TYPE
ISAKMP packets with invalid cookies were detected from the specified source, intended for the specified destination. The initiator and responder cookies are also sent with the trap. The current count is sent to allow the trap to accurately relfect dropped and throttled traps. Implementations SHOULD send one trap per peer (within a reasonable time period, rather than sending one trap per packet.
1.3.6.1.4.1.14179.2.6.3.35current
bsnRogueAPDetected
NOTIFICATION-TYPE
When a Rogue AP is detected this Trap will be sent out along with APMacAddress on which its detected
1.3.6.1.4.1.14179.2.6.3.36current
bsnAPLoadProfileUpdatedToPass
NOTIFICATION-TYPE
When LOAD Profile state changes from FAIL to PASSt this notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.37current
bsnAPNoiseProfileUpdatedToPass
NOTIFICATION-TYPE
When Noise Profile state changes from FAIL tp PASS, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.38current
bsnAPInterferenceProfileUpdatedToPass
NOTIFICATION-TYPE
When Interference Profile state changes from FAIL tp PASS, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable /disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.39current
bsnAPCoverageProfileUpdatedToPass
NOTIFICATION-TYPE
When Coverage Profile state changes from FAIL tp PASS, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
1.3.6.1.4.1.14179.2.6.3.40current
bsnRogueAPRemoved
NOTIFICATION-TYPE
When a Rogue AP that was detected earlier no longer exists this Trap will be sent out along with APMacAddress on which its detected
1.3.6.1.4.1.14179.2.6.3.41current
bsnRadiosExceedLicenseCount
NOTIFICATION-TYPE
Whenever the currently associated Radios exceed the License Count This trap will be sent to annoy the Customer
1.3.6.1.4.1.14179.2.6.3.42current
bsnSensedTemperatureTooHigh
NOTIFICATION-TYPE
Temperature sensor temp too High - temp is too high on the unit. Immediate action should be taken
1.3.6.1.4.1.14179.2.6.3.43current
bsnSensedTemperatureTooLow
NOTIFICATION-TYPE
Temperature sensor temp too Low - temp is too high on the unit. Immediate action should be taken
1.3.6.1.4.1.14179.2.6.3.44current
bsnTemperatureSensorFailure
NOTIFICATION-TYPE
Temperature sensor hw failure - temp sensor has failed. Temperature is unknown
1.3.6.1.4.1.14179.2.6.3.45current
bsnTemperatureSensorClear
NOTIFICATION-TYPE
Temperature sensor clear -- temp sensor alarm condition is over. sensor is operating within proper temp range
1.3.6.1.4.1.14179.2.6.3.46current
bsnPOEControllerFailure
NOTIFICATION-TYPE
POE Controller has failed. Its a very critical trap. User intervention is required.
1.3.6.1.4.1.14179.2.6.3.47current
bsnMaxRogueCountExceeded
NOTIFICATION-TYPE
The number of rogues has exceeded the maximum Rogues allowed
1.3.6.1.4.1.14179.2.6.3.48current
bsnMaxRogueCountClear
NOTIFICATION-TYPE
The number of rogues is within the maximum Rogues allowed
1.3.6.1.4.1.14179.2.6.3.49current
bsnApMaxRogueCountExceeded
NOTIFICATION-TYPE
The number of rogues has exceeded the maximum Rogues allowed on the AP
1.3.6.1.4.1.14179.2.6.3.50current
bsnApMaxRogueCountClear
NOTIFICATION-TYPE
The number of rogues is within the maximum Rogues allowed on the AP
1.3.6.1.4.1.14179.2.6.3.51current
bsnDot11StationBlacklisted
NOTIFICATION-TYPE
The station exclusion notification shall be sent when the client is excluded. The reason could be repeated auth or association failures or IP Address theft. The value of the notification shall include the MAC address of the MAC to which the Authentication frame was sent, the MAC and Slot Id of AP that client was associated to and the reason for exclusion listing.
1.3.6.1.4.1.14179.2.6.3.52current
bsnDot11StationAssociate
NOTIFICATION-TYPE
The associate notification shall be sent when any of the watchlisted clients(present on at least one watch list) associates with an AP. The value of the notification shall include the MAC address and the Slot ID of the radio to which the station Associated.
1.3.6.1.4.1.14179.2.6.3.53current
bsnApBigNavDosAttack
NOTIFICATION-TYPE
The AP sent a string of messages with large NAV field. This is most likely a malicious denial of service attack.
1.3.6.1.4.1.14179.2.6.3.55current
bsnTooManyUnsuccessLoginAttempts
NOTIFICATION-TYPE
The Management User made too many unsuccessful login attempts.
1.3.6.1.4.1.14179.2.6.3.56current
bsnWepKeyDecryptError
NOTIFICATION-TYPE
Issued when a decrypt error occurrs. The WEP Key configured at the station may be wrong.
1.3.6.1.4.1.14179.2.6.3.57current
bsnWpaMicErrorCounterActivated
NOTIFICATION-TYPE
Issued when a WPA MIC error occurs and a counter measure is activated at the AP.
1.3.6.1.4.1.14179.2.6.3.58current
bsnRogueAPDetectedOnWiredNetwork
NOTIFICATION-TYPE
When a Rogue is detected on the wired network this trap will be sent out. The same trap with bsnRogueAPOnWiredNetwork set to no will clear the previous trap.
1.3.6.1.4.1.14179.2.6.3.59current
bsnApHasNoRadioCards
NOTIFICATION-TYPE
When an AP has no radio cards present on it, the switch sends this trap.
1.3.6.1.4.1.14179.2.6.3.60current
bsnDuplicateIpAddressReported
NOTIFICATION-TYPE
This trap is issued when the switch or an AP detects another machine using its IP Address. The first variable has value yes if the duplicate IP is reported by an AP. In that case, the second attribute will carry the AP MAC Address. The third variable is the duplicate IP address in question and the last attribute is the MAC Address of the machine that is found to be using the duplicate IP.
1.3.6.1.4.1.14179.2.6.3.61current
bsnAPContainedAsARogue
NOTIFICATION-TYPE
When our AP detects that it is being contained by another AP, this trap is issued. The clear flag is true if the AP is no longer being contained.
1.3.6.1.4.1.14179.2.6.3.62current
bsnTrustedApHasInvalidSsid
NOTIFICATION-TYPE
Issued when a Trusted Rogue AP is auto contained for advertising invalid SSID. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.63current
bsnTrustedApIsMissing
NOTIFICATION-TYPE
Issued when a Trusted Rogue AP is missing or has failed. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.64current
bsnAdhocRogueAutoContained
NOTIFICATION-TYPE
Issued when an Adhoc Rogue is auto contained. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.65current
bsnRogueApAutoContained
NOTIFICATION-TYPE
Issued when a Rogue AP is auto contained for advertising our SSID. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.66current
bsnTrustedApHasInvalidEncryption
NOTIFICATION-TYPE
Issued when a Trusted Rogue AP is auto contained for using invalid encryption. The second param is for the encryption used and the third param is for encryption required. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.67current
bsnTrustedApHasInvalidRadioPolicy
NOTIFICATION-TYPE
Issued when a Trusted Rogue AP is auto contained for using invalid radio policy. The second param is for the radio policy used and the third param is for radio policy required. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.68current
bsnNetworkStateChanged
NOTIFICATION-TYPE
When the 802.11a or b/g network state is changed this trap is issued.
1.3.6.1.4.1.14179.2.6.3.69current
bsnSignatureAttackDetected
NOTIFICATION-TYPE
This trap is sent out when a signature attack is detected by the switch. The standard and custom signatures are predefined on the switch (see bsnSignatureConfig group). The signatures also defines if its detection should be reported. The trap variables bsnSignatureName and bsnSignatureDescription are retrieved from the detected signature definition. Clear Trap Variable is turned on when the signature attack stops. The signature's quiet time configuration speicifes the time after which the clear trap would be sent. bsnSignatureMacInfo indicates whether the signature is used to track pattern matches for all source MAC addresses together or seperately for individual source MAC addresses. bsnSignatureAttackFrequency will carry the value for a specific MAC address or for all MAC addresses depending on bsnSignatureMacInfo.
1.3.6.1.4.1.14179.2.6.3.70current
bsnAPRadioCardTxFailure
NOTIFICATION-TYPE
This trap is sent by the switch when a radio card on an AP stops transmitting.
1.3.6.1.4.1.14179.2.6.3.71current
bsnAPRadioCardTxFailureClear
NOTIFICATION-TYPE
This trap is sent by the switch when a radio card on an AP starts transmitting again after a prior failure.
1.3.6.1.4.1.14179.2.6.3.72current
bsnAPRadioCardRxFailure
NOTIFICATION-TYPE
This trap is sent by the switch when a radio card on an AP stops receiving.
1.3.6.1.4.1.14179.2.6.3.73current
bsnAPRadioCardRxFailureClear
NOTIFICATION-TYPE
This trap is sent by the switch when a radio card on an AP starts receiving again after a prior failure.
1.3.6.1.4.1.14179.2.6.3.74current
bsnAPImpersonationDetected
NOTIFICATION-TYPE
This trap is sent by the switch when a radio of an authenticated AP hears from another AP whose MAC Address neither matches that of a rogue's and nor is it an authenticated neighbor of the detecting AP.
1.3.6.1.4.1.14179.2.6.3.75current
bsnTrustedApHasInvalidPreamble
NOTIFICATION-TYPE
Issued when a Trusted Rogue AP is auto contained for using invalid preamble. The second param is for the preamble used and the third param is for preamble required. If the clear variable has value true, then the trap clears the earlier alert.
1.3.6.1.4.1.14179.2.6.3.76current
bsnAPIPAddressFallback
NOTIFICATION-TYPE
This trap is sent out when an AP, with the configured static ip-address, fails to establish connection with outside world and starts using DHCP as a fallback option.
1.3.6.1.4.1.14179.2.6.3.77current
bsnAPFunctionalityDisabled
NOTIFICATION-TYPE
This trap is sent out when AP functionality on the switch is disabled because the License key has expired or has been deleted or doesn't match the switch image.
1.3.6.1.4.1.14179.2.6.3.78current
bsnAPRegulatoryDomainMismatch
NOTIFICATION-TYPE
This trap is generated if an AP's regulatory domain doesn't match the country the switch is configured for. Due to the mismatch, the AP will fail to associate with the Switch.
1.3.6.1.4.1.14179.2.6.3.79deprecated
bsnRxMulticastQueueFull
NOTIFICATION-TYPE
This trap indicates that the CPU's Receive Multicast Queue is Full.
1.3.6.1.4.1.14179.2.6.3.80current
bsnRadarChannelDetected
NOTIFICATION-TYPE
This trap is sent when radar signals are detected on the current channel
1.3.6.1.4.1.14179.2.6.3.81current
bsnRadarChannelCleared
NOTIFICATION-TYPE
This trap will be generated, if a radar trap has been generated earlier, after the expiry of Non-Occupancy Period.
1.3.6.1.4.1.14179.2.6.3.82current
bsnAPAuthorizationFailure
NOTIFICATION-TYPE
This trap is sent out in case of authorization failure while attempting to associate the AP to the controller. bsnAPDot3MacAddress represents the mac-address of that AP. bsnAPName is name of AP
1.3.6.1.4.1.14179.2.6.3.83current
radioCoreDumpTrap
NOTIFICATION-TYPE
When radio module in AP dumps core, it informs controller and controller generates this trap. The core file can be retrieved on demand.
1.3.6.1.4.1.14179.2.6.3.84current
invalidRadioTrap
NOTIFICATION-TYPE
This trap will be generated when an AP has joined is using unsupported radio or a radio slot not currently not being used.
1.3.6.1.4.1.14179.2.6.3.85current
countryChangeTrap
NOTIFICATION-TYPE
This trap will be generated when an operator changes the country of operation. New country code will be sent in trap.
1.3.6.1.4.1.14179.2.6.3.86deprecated
unsupportedAPTrap
NOTIFICATION-TYPE
This trap will be generated when unsupported AP try to join 40xx/410x or 3500 with 64MB flash.
1.3.6.1.4.1.14179.2.6.3.87current
heartbeatLossTrap
NOTIFICATION-TYPE
This trap will be generated when controller loses connection with the Supervisor Switch in which it is physically embedded and doesn't hear the heartbeat keepalives from the Supervisor.
1.3.6.1.4.1.14179.2.6.3.88current
locationNotifyTrap
NOTIFICATION-TYPE
This trap will be generated by the location server for notifications of location events.
1.3.6.1.4.1.14179.2.6.3.89current

Conformance

NameOIDStatus
bsnEssGroup
OBJECT-GROUP
This collection of objects provides information about Airespace Wireless LAN Configuration Attributes These objects are defined under bsnEss object.
1.3.6.1.4.1.14179.2.50.1deprecated
bsnApGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace APs that are associated with the Switch. These objects are defined under bsnAP object.
1.3.6.1.4.1.14179.2.50.2deprecated
bsnGlobalDot11Group
OBJECT-GROUP
This collection of objects provide the information about Airespace 802.11 standard attributes applied globally. These objects are defined under bsnGlobalDot11 object.
1.3.6.1.4.1.14179.2.50.3deprecated
bsnRrmGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace Radio Resource Management Configuration Parameters. These objects are defined under bsnRrm object.
1.3.6.1.4.1.14179.2.50.4current
bsnAAAGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace Authentication, Authorization, and Accounting Attributes. These objects are defined under bsnAAA object. bsnAAAGroup object is superseded by banAAGroupRev1.
1.3.6.1.4.1.14179.2.50.5deprecated
bsnTrapsGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace Trap Configuration and Trap definition. These objects are defined under bsnTrap.
1.3.6.1.4.1.14179.2.50.6deprecated
bsnUtilityGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace General Utilities such as ping, syslog. These objects are defined under bsnUtility.
1.3.6.1.4.1.14179.2.50.7deprecated
bsnMobilityGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace Mobility Group Parameters and ststistics. These are objects defined under bsnMobility.
1.3.6.1.4.1.14179.2.50.8current
bsnIpsecGroup
OBJECT-GROUP
This collection of objects provide the information about Airespace Global IpSec Group. These objects are defined under bsnIpsec.
1.3.6.1.4.1.14179.2.50.9current
bsnWrasDepGroup
OBJECT-GROUP
This collection of objects are derprecated in bsnWireless module.
1.3.6.1.4.1.14179.2.50.10deprecated
bsnWrasObsGroup
OBJECT-GROUP
This collection of objects are obsoleted in bsnWireless module.
1.3.6.1.4.1.14179.2.50.11obsolete
bsnWrasTrap
NOTIFICATION-GROUP
This collection of objects provides all notification that Switch need to generate to the Management System.
1.3.6.1.4.1.14179.2.50.12obsolete
bsnEssGroupRev1
OBJECT-GROUP
This collection of objects provides information about Airespace Wireless LAN Configuration Attributes These objects are defined under bsnEss object.
1.3.6.1.4.1.14179.2.50.13current
bsnGlobalDot11GroupRev1
OBJECT-GROUP
This collection of objects provide the information about Airespace 802.11 standard attributes applied globally. These objects are defined under bsnGlobalDot11 object.
1.3.6.1.4.1.14179.2.50.14current
bsnAAAGroupRev1
OBJECT-GROUP
This collection of objects provide the information about Airespace Authentication, Authorization, and Accounting Attributes. These objects are defined under bsnAAA object.
1.3.6.1.4.1.14179.2.50.15current
bsnTrapsGroupRev1
OBJECT-GROUP
This collection of objects provide the information about Airespace Trap Configuration and Trap definition. These objects are defined under bsnTrap.
1.3.6.1.4.1.14179.2.50.16current
bsnWrasTrapRev1
NOTIFICATION-GROUP
This collection of objects provides all notification that Switch need to generate to the Management System.
1.3.6.1.4.1.14179.2.50.17current
bsnApGroupRev1
OBJECT-GROUP
This collection of objects provide the information about Airespace APs that are associated with the Switch. These objects are defined under bsnAP object.
1.3.6.1.4.1.14179.2.50.18current
bsnUtilityGroupRev1
OBJECT-GROUP
This collection of objects provide the information about Airespace General Utilities such as ping, syslog. These objects are defined under bsnUtility.
1.3.6.1.4.1.14179.2.50.19current
bsnWrasObsGroupRev1
OBJECT-GROUP
This collection of objects are obsoleted in bsnWireless module.
1.3.6.1.4.1.14179.2.50.20obsolete
bsnWrasObsTrap
NOTIFICATION-GROUP
This collection of objects provides all notification that Switch need to generate to the Management System.
1.3.6.1.4.1.14179.2.50.21obsolete
bsnWrasCompliance
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement the bsnWireless module.
1.3.6.1.4.1.14179.2.51.1deprecated
bsnWrasComplianceRev1
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement the bsnWireless module.
1.3.6.1.4.1.14179.2.51.2current