AE-PM-TABLE-MIB
- Registered at
- 1.3.6.1.4.1.6321.1.2.5.5
- Last updated
- 2010-01-15 00:00
- Organization
- Calix Networks, Inc.
- Revisions
- 2010-01-15 00:00
- Namespace
- calix
- Source file
AE-PM-TABLE-MIB- Digest
sha256:dcac69c844a2e6762f9fd791e44f49cb9990bf4bcec3dae15785b881cc79bf40
Description
This management information module contains AE ONT performance statistics.
Contact
Calix Networks, Inc. Postal: 1035 North McDowell Boulevard Petaluma, CA 94954-1173 USA Phone: +1 707 766 3000 Fax: +1 707 766 3100 E-mail: mib-info@calix.com
Imports
| From | Symbols |
|---|---|
| AE-ALARM-TABLE-MIB | pSeries |
| AE-TC | AePwe3AggInstance, AePwe3BundleInstance, AePwe3T1Instance, AeThresholdCrossingIndex, AeThresholdCrossingPointer, PerfCurrentCount, PerfInvalidFlag |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
AE-ALARM-TABLE-MIB AE-PM-TABLE-MIB AE-TC CALIX-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| aePmTCModule OBJECT-IDENTITY | 1.3.6.1.4.1.6321.1.2.5.5.1 | |||
| aeThresholdCrossingTable OBJECT-TYPE This table contains threshold values for the performance monitoring parameters maintained by other entities. Other entities may point to this table. Multiple other entities may point to a single entry in this table. The convention for threshold crossing values is a value of 0 means the threshold value is not being checked, i.e., the TCA is disabled. | 1.3.6.1.4.1.6321.1.2.5.5.1.1 | not-accessible | current | |
| aeThresholdCrossingEntry OBJECT-TYPE Each entry contains one set of threshold crossing values. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1 | not-accessible | current | |
| aeThresholdCrossingIndex OBJECT-TYPE This object identifies the index info the threshold crossing table. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.1 | AeThresholdCrossingIndex | read-only | current |
| aeThresholdCrossingValue1 OBJECT-TYPE This object identifies the threshold value for the 1st thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.2 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue2 OBJECT-TYPE This object identifies the threshold value for the 2nd thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.3 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue3 OBJECT-TYPE This object identifies the threshold value for the 3rd thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.4 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue4 OBJECT-TYPE This object identifies the threshold value for the 4th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.5 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue5 OBJECT-TYPE This object identifies the threshold value for the 5th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.6 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue6 OBJECT-TYPE This object identifies the threshold value for the 6th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.7 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue7 OBJECT-TYPE This object identifies the threshold value for the 7th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.8 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue8 OBJECT-TYPE This object identifies the threshold value for the 8th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.9 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue9 OBJECT-TYPE This object identifies the threshold value for the 9th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.10 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue10 OBJECT-TYPE This object identifies the threshold value for the 10th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.11 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue11 OBJECT-TYPE This object identifies the threshold value for the 11th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.12 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue12 OBJECT-TYPE This object identifies the threshold value for the 12th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.13 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue13 OBJECT-TYPE This object identifies the threshold value for the 13th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.14 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue14 OBJECT-TYPE This object identifies the threshold value for the 14th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.15 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue15 OBJECT-TYPE This object identifies the threshold value for the 15th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.16 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingValue16 OBJECT-TYPE This object identifies the threshold value for the 16th thresholded counter. A value of zero indicates no threshold value. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.17 | PerfCurrentCount | read-write | current |
| aeThresholdCrossingRowStatus OBJECT-TYPE This object is used for row creation. | 1.3.6.1.4.1.6321.1.2.5.5.1.1.1.18 | RowStatus | read-create | current |
| aePwe3PmModule OBJECT-IDENTITY | 1.3.6.1.4.1.6321.1.2.5.5.2 | |||
| aePwe3BunCurrent15Table OBJECT-TYPE The bundle table contains statistics for the pseudowire connection (i.e. bundle). | 1.3.6.1.4.1.6321.1.2.5.5.2.1 | not-accessible | current | |
| aePwe3BunCurrent15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1 | not-accessible | current | |
| aePwe3BunCurrent15Port OBJECT-TYPE The T1 port instance associated with this bundle. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3BunCurrent15Bundle OBJECT-TYPE The bundle instance (identifier) associated with this pseudowire. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.2 | AePwe3BundleInstance | read-only | current |
| aePwe3BunCurrent15RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.3 | Counter32 | read-only | current |
| aePwe3BunCurrent15TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.4 | Counter32 | read-only | current |
| aePwe3BunCurrent15LostPacket OBJECT-TYPE Total number of packets lost. These are packets that were never received as determined by gaps in the packet sequence numbers. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.5 | Counter32 | read-only | current |
| aePwe3BunCurrent15DiscardPacket OBJECT-TYPE Total number of packets received but discarded. Packets may be discarded if they are received too far out of order to be reordered. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.6 | Counter32 | read-only | current |
| aePwe3BunCurrent15ReorderPacket OBJECT-TYPE Total number of packets received and reordered. If packets are received out of order, an attempt is made to reorder. Reordering packets does not result in an error on the T1. However, this could be used as an indication that there is congestion within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.7 | Counter32 | read-only | current |
| aePwe3BunCurrent15JumpedPacket OBJECT-TYPE Total number of packets jumped. A jump occurs when there is a gap in the sequence numbers. As such, lost = jumped - reordered. If packets are not arriving out of order, then the lost = jumped. This is an indication that packet(s) are dropping somewhere within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.8 | Counter32 | read-only | current |
| aePwe3BunCurrent15MalformedSec OBJECT-TYPE The number of seconds a packet length mismatch has been detected. The packet size must be the same at each end of the pseudowire. This is an indication of a configuration problem. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.9 | Counter32 | read-only | current |
| aePwe3BunCurrent15TxRbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the R-bit asserted. The R-bit is asserted in the transmit packets when a bundle stops receiving packets. This could indicate that the other end of the pseudowire is not configured. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.10 | Counter32 | read-only | current |
| aePwe3BunCurrent15TxLbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the L-bit asserted. The L-bit is asserted in the transmit packets when there is a local T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.11 | Counter32 | read-only | current |
| aePwe3BunCurrent15RxRbitSec OBJECT-TYPE The number of seconds packets have been received with the R-bit asserted. This is an indication that the other end of the pseudowire is not receiving packets. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.12 | Counter32 | read-only | current |
| aePwe3BunCurrent15RxLbitSec OBJECT-TYPE The number of seconds packets have been received with the L-bit asserted. This is an indication that there is a far-end T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.13 | Counter32 | read-only | current |
| aePwe3BunCurrent15JitterBufferUnderrun OBJECT-TYPE The number of jitter buffer underruns that have been detected. The jitter buffer has emptied (packet reception is too slow). This could be an indication that the jitter buffer is not configured big enough to accommodate the network packet delay variation. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.14 | Counter32 | read-only | current |
| aePwe3BunCurrent15JitterBufferOverrun OBJECT-TYPE The number of jitter buffer overruns that have been detected. The jitter buffer is full and there is no room for addition packets. This could be an indication of a timing problem (T1 timing at each end of the pseudowire is not synchronous). | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.15 | Counter32 | read-only | current |
| aePwe3BunCurrent15ES OBJECT-TYPE The number of errored seconds. An errored second is counted for any of the following conditions: Lost Packets Discarded Packets Jitter Buffer Underrun Jitter Buffer Overrun | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.16 | Counter32 | read-only | current |
| aePwe3BunCurrent15UAS OBJECT-TYPE The number of unavailable seconds. An unavailable second is counted for any of the following conditions: Packet Size Mismatch R-bit is being transmitted L-bit is being transmitted R-bit is being received L-bit is being received Not receiving any packets Not transmitting any packets Bundle is not yet connected (e.g. ARP is not resolved) | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.17 | Counter32 | read-only | current |
| aePwe3BunCurrent15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.18 | PerfInvalidFlag | read-only | current |
| aePwe3BunCurrent15ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.1.1.19 | AeThresholdCrossingPointer | read-write | current |
| aePwe3BunInterval15Table OBJECT-TYPE The bundle table contains statistics for the pseudowire connection (i.e. bundle). | 1.3.6.1.4.1.6321.1.2.5.5.2.2 | not-accessible | current | |
| aePwe3BunInterval15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1 | not-accessible | current | |
| aePwe3BunInterval15Port OBJECT-TYPE The T1 port instance associated with this bundle. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3BunInterval15Bundle OBJECT-TYPE The bundle instance (identifier) associated with this pseudowire. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.2 | AePwe3BundleInstance | read-only | current |
| aePwe3BunInterval15Interval OBJECT-TYPE There are 32 15-minute bucket intervals. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.3 | INTEGER (1..96) | read-only | current |
| aePwe3BunInterval15RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.4 | Counter32 | read-only | current |
| aePwe3BunInterval15TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.5 | Counter32 | read-only | current |
| aePwe3BunInterval15LostPacket OBJECT-TYPE Total number of packets lost. These are packets that were never received as determined by gaps in the packet sequence numbers. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.6 | Counter32 | read-only | current |
| aePwe3BunInterval15DiscardPacket OBJECT-TYPE Total number of packets received but discarded. Packets may be discarded if they are received too far out of order to be reordered. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.7 | Counter32 | read-only | current |
| aePwe3BunInterval15ReorderPacket OBJECT-TYPE Total number of packets received and reordered. If packets are received out of order, an attempt is made to reorder. Reordering packets does not result in an error on the T1. However, this could be used as an indication that there is congestion within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.8 | Counter32 | read-only | current |
| aePwe3BunInterval15JumpedPacket OBJECT-TYPE Total number of packets jumped. A jump occurs when there is a gap in the sequence numbers. As such, lost = jumped - reordered. If packets are not arriving out of order, then the lost = jumped. This is an indication that packet(s) are dropping somewhere within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.9 | Counter32 | read-only | current |
| aePwe3BunInterval15MalformedSec OBJECT-TYPE The number of seconds a packet length mismatch has been detected. The packet size must be the same at each end of the pseudowire. This is an indication of a configuration problem. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.10 | Counter32 | read-only | current |
| aePwe3BunInterval15TxRbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the R-bit asserted. The R-bit is asserted in the transmit packets when a bundle stops receiving packets. This could indicate that the other end of the pseudowire is not configured. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.11 | Counter32 | read-only | current |
| aePwe3BunInterval15TxLbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the L-bit asserted. The L-bit is asserted in the transmit packets when there is a local T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.12 | Counter32 | read-only | current |
| aePwe3BunInterval15RxRbitSec OBJECT-TYPE The number of seconds packets have been received with the R-bit asserted. This is an indication that the other end of the pseudowire is not receiving packets. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.13 | Counter32 | read-only | current |
| aePwe3BunInterval15RxLbitSec OBJECT-TYPE The number of seconds packets have been received with the L-bit asserted. This is an indication that there is a far-end T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.14 | Counter32 | read-only | current |
| aePwe3BunInterval15JitterBufferUnderrun OBJECT-TYPE The number of jitter buffer underruns that have been detected. The jitter buffer has emptied (packet reception is too slow). This could be an indication that the jitter buffer is not configured big enough to accommodate the network packet delay variation. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.15 | Counter32 | read-only | current |
| aePwe3BunInterval15JitterBufferOverrun OBJECT-TYPE The number of jitter buffer overruns that have been detected. The jitter buffer is full and there is no room for addition packets. This could be an indication of a timing problem (T1 timing at each end of the pseudowire is not synchronous). | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.16 | Counter32 | read-only | current |
| aePwe3BunInterval15ES OBJECT-TYPE The number of errored seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.17 | Counter32 | read-only | current |
| aePwe3BunInterval15UAS OBJECT-TYPE The number of unavailable seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.18 | Counter32 | read-only | current |
| aePwe3BunInterval15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.2.1.19 | PerfInvalidFlag | read-only | current |
| aePwe3BunCurrent24Table OBJECT-TYPE The bundle table contains statistics for the pseudowire connection (i.e. bundle). | 1.3.6.1.4.1.6321.1.2.5.5.2.3 | not-accessible | current | |
| aePwe3BunCurrent24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1 | not-accessible | current | |
| aePwe3BunCurrent24Port OBJECT-TYPE The T1 port instance associated with this bundle. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3BunCurrent24Bundle OBJECT-TYPE The bundle instance (identifier) associated with this pseudowire. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.2 | AePwe3BundleInstance | read-only | current |
| aePwe3BunCurrent24RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.3 | Counter32 | read-only | current |
| aePwe3BunCurrent24TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.4 | Counter32 | read-only | current |
| aePwe3BunCurrent24LostPacket OBJECT-TYPE Total number of packets lost. These are packets that were never received as determined by gaps in the packet sequence numbers. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.5 | Counter32 | read-only | current |
| aePwe3BunCurrent24DiscardPacket OBJECT-TYPE Total number of packets received but discarded. Packets may be discarded if they are received too far out of order to be reordered. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.6 | Counter32 | read-only | current |
| aePwe3BunCurrent24ReorderPacket OBJECT-TYPE Total number of packets received and reordered. If packets are received out of order, an attempt is made to reorder. Reordering packets does not result in an error on the T1. However, this could be used as an indication that there is congestion within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.7 | Counter32 | read-only | current |
| aePwe3BunCurrent24JumpedPacket OBJECT-TYPE Total number of packets jumped. A jump occurs when there is a gap in the sequence numbers. As such, lost = jumped - reordered. If packets are not arriving out of order, then the lost = jumped. This is an indication that packet(s) are dropping somewhere within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.8 | Counter32 | read-only | current |
| aePwe3BunCurrent24MalformedSec OBJECT-TYPE The number of seconds a packet length mismatch has been detected. The packet size must be the same at each end of the pseudowire. This is an indication of a configuration problem. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.9 | Counter32 | read-only | current |
| aePwe3BunCurrent24TxRbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the R-bit asserted. The R-bit is asserted in the transmit packets when a bundle stops receiving packets. This could indicate that the other end of the pseudowire is not configured. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.10 | Counter32 | read-only | current |
| aePwe3BunCurrent24TxLbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the L-bit asserted. The L-bit is asserted in the transmit packets when there is a local T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.11 | Counter32 | read-only | current |
| aePwe3BunCurrent24RxRbitSec OBJECT-TYPE The number of seconds packets have been received with the R-bit asserted. This is an indication that the other end of the pseudowire is not receiving packets. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.12 | Counter32 | read-only | current |
| aePwe3BunCurrent24RxLbitSec OBJECT-TYPE The number of seconds packets have been received with the L-bit asserted. This is an indication that there is a far-end T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.13 | Counter32 | read-only | current |
| aePwe3BunCurrent24JitterBufferUnderrun OBJECT-TYPE The number of jitter buffer underruns that have been detected. The jitter buffer has emptied (packet reception is too slow). This could be an indication that the jitter buffer is not configured big enough to accommodate the network packet delay variation. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.14 | Counter32 | read-only | current |
| aePwe3BunCurrent24JitterBufferOverrun OBJECT-TYPE The number of jitter buffer overruns that have been detected. The jitter buffer is full and there is no room for addition packets. This could be an indication of a timing problem (T1 timing at each end of the pseudowire is not synchronous). | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.15 | Counter32 | read-only | current |
| aePwe3BunCurrent24ES OBJECT-TYPE The number of errored seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.16 | Counter32 | read-only | current |
| aePwe3BunCurrent24UAS OBJECT-TYPE The number of unavailable seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.17 | Counter32 | read-only | current |
| aePwe3BunCurrent24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.18 | PerfInvalidFlag | read-only | current |
| aePwe3BunCurrent24ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.3.1.19 | AeThresholdCrossingPointer | read-write | current |
| aePwe3BunInterval24Table OBJECT-TYPE The bundle table contains statistics for the pseudowire connection (i.e. bundle). | 1.3.6.1.4.1.6321.1.2.5.5.2.4 | not-accessible | current | |
| aePwe3BunInterval24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1 | not-accessible | current | |
| aePwe3BunInterval24Port OBJECT-TYPE The T1 port instance associated with this bundle. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3BunInterval24Bundle OBJECT-TYPE The bundle instance (identifier) associated with this pseudowire. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.2 | AePwe3BundleInstance | read-only | current |
| aePwe3BunInterval24Interval OBJECT-TYPE There is 1 24-hour interval (yesterday). | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.3 | INTEGER (1) | read-only | current |
| aePwe3BunInterval24RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.4 | Counter32 | read-only | current |
| aePwe3BunInterval24TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will increment at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.5 | Counter32 | read-only | current |
| aePwe3BunInterval24LostPacket OBJECT-TYPE Total number of packets lost. These are packets that were never received as determined by gaps in the packet sequence numbers. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.6 | Counter32 | read-only | current |
| aePwe3BunInterval24DiscardPacket OBJECT-TYPE Total number of packets received but discarded. Packets may be discarded if they are received too far out of order to be reordered. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.7 | Counter32 | read-only | current |
| aePwe3BunInterval24ReorderPacket OBJECT-TYPE Total number of packets received and reordered. If packets are received out of order, an attempt is made to reorder. Reordering packets does not result in an error on the T1. However, this could be used as an indication that there is congestion within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.8 | Counter32 | read-only | current |
| aePwe3BunInterval24JumpedPacket OBJECT-TYPE Total number of packets jumped. A jump occurs when there is a gap in the sequence numbers. As such, lost = jumped - reordered. If packets are not arriving out of order, then the lost = jumped. This is an indication that packet(s) are dropping somewhere within the network. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.9 | Counter32 | read-only | current |
| aePwe3BunInterval24MalformedSec OBJECT-TYPE The number of seconds a packet length mismatch has been detected. The packet size must be the same at each end of the pseudowire. This is an indication of a configuration problem. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.10 | Counter32 | read-only | current |
| aePwe3BunInterval24TxRbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the R-bit asserted. The R-bit is asserted in the transmit packets when a bundle stops receiving packets. This could indicate that the other end of the pseudowire is not configured. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.11 | Counter32 | read-only | current |
| aePwe3BunInterval24TxLbitSec OBJECT-TYPE The number of seconds packets have been transmitted with the L-bit asserted. The L-bit is asserted in the transmit packets when there is a local T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.12 | Counter32 | read-only | current |
| aePwe3BunInterval24RxRbitSec OBJECT-TYPE The number of seconds packets have been received with the R-bit asserted. This is an indication that the other end of the pseudowire is not receiving packets. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.13 | Counter32 | read-only | current |
| aePwe3BunInterval24RxLbitSec OBJECT-TYPE The number of seconds packets have been received with the L-bit asserted. This is an indication that there is a far-end T1 LOS condition. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.14 | Counter32 | read-only | current |
| aePwe3BunInterval24JitterBufferUnderrun OBJECT-TYPE The number of jitter buffer underruns that have been detected. The jitter buffer has emptied (packet reception is too slow). This could be an indication that the jitter buffer is not configured big enough to accommodate the network packet delay variation. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.15 | Counter32 | read-only | current |
| aePwe3BunInterval24JitterBufferOverrun OBJECT-TYPE The number of jitter buffer overruns that have been detected. The jitter buffer is full and there is no room for addition packets. This could be an indication of a timing problem (T1 timing at each end of the pseudowire is not synchronous). | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.16 | Counter32 | read-only | current |
| aePwe3BunInterval24ES OBJECT-TYPE The number of errored seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.17 | Counter32 | read-only | current |
| aePwe3BunInterval24UAS OBJECT-TYPE The number of unavailable seconds. See current15 table description. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.18 | Counter32 | read-only | current |
| aePwe3BunInterval24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.4.1.19 | PerfInvalidFlag | read-only | current |
| aePwe3T1Current15Table OBJECT-TYPE The PWE3 T1 table contains statistics for the T1 TDM interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.5 | not-accessible | current | |
| aePwe3T1Current15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1 | not-accessible | current | |
| aePwe3T1Current15Port OBJECT-TYPE The T1 port instance. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3T1Current15LCV OBJECT-TYPE The number of line code violations. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.2 | Counter32 | read-only | current |
| aePwe3T1Current15ES OBJECT-TYPE The number of errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.3 | Counter32 | read-only | current |
| aePwe3T1Current15SES OBJECT-TYPE The number of severely errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.4 | Counter32 | read-only | current |
| aePwe3T1Current15UAS OBJECT-TYPE The number of unavailable seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.5 | Counter32 | read-only | current |
| aePwe3T1Current15CSS OBJECT-TYPE The number of controlled slip seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.6 | Counter32 | read-only | current |
| aePwe3T1Current15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.7 | PerfInvalidFlag | read-only | current |
| aePwe3T1Current15ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.5.1.8 | AeThresholdCrossingPointer | read-write | current |
| aePwe3T1Interval15Table OBJECT-TYPE The PWE3 T1 table contains statistics for the specified interval and T1 TDM interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.6 | not-accessible | current | |
| aePwe3T1Interval15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1 | not-accessible | current | |
| aePwe3T1Interval15Port OBJECT-TYPE The T1 port instance. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3T1Interval15Interval OBJECT-TYPE There are 32 15-minute T1 PM buckets. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.2 | INTEGER (1..96) | read-only | current |
| aePwe3T1Interval15LCV OBJECT-TYPE The number of line code violations. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.3 | Counter32 | read-only | current |
| aePwe3T1Interval15ES OBJECT-TYPE The number of errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.4 | Counter32 | read-only | current |
| aePwe3T1Interval15SES OBJECT-TYPE The number of severely errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.5 | Counter32 | read-only | current |
| aePwe3T1Interval15UAS OBJECT-TYPE The number of unavailable seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.6 | Counter32 | read-only | current |
| aePwe3T1Interval15CSS OBJECT-TYPE The number of controlled slip seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.7 | Counter32 | read-only | current |
| aePwe3T1Interval15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.6.1.8 | PerfInvalidFlag | read-only | current |
| aePwe3T1Current24Table OBJECT-TYPE The PWE3 T1 table contains statistics for the T1 TDM interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.7 | not-accessible | current | |
| aePwe3T1Current24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1 | not-accessible | current | |
| aePwe3T1Current24Port OBJECT-TYPE The T1 port instance. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3T1Current24LCV OBJECT-TYPE The number of line code violations. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.2 | Counter32 | read-only | current |
| aePwe3T1Current24ES OBJECT-TYPE The number of errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.3 | Counter32 | read-only | current |
| aePwe3T1Current24SES OBJECT-TYPE The number of severely errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.4 | Counter32 | read-only | current |
| aePwe3T1Current24UAS OBJECT-TYPE The number of unavailable seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.5 | Counter32 | read-only | current |
| aePwe3T1Current24CSS OBJECT-TYPE The number of controlled slip seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.6 | Counter32 | read-only | current |
| aePwe3T1Current24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.7 | PerfInvalidFlag | read-only | current |
| aePwe3T1Current24ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.7.1.8 | AeThresholdCrossingPointer | read-write | current |
| aePwe3T1Interval24Table OBJECT-TYPE The PWE3 T1 table contains statistics for the specified interval and T1 TDM interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.8 | not-accessible | current | |
| aePwe3T1Interval24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1 | not-accessible | current | |
| aePwe3T1Interval24Port OBJECT-TYPE The T1 port instance. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.1 | AePwe3T1Instance | read-only | current |
| aePwe3T1Interval24Interval OBJECT-TYPE There is 1 24-hour interval (yesterday). | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.2 | INTEGER (1) | read-only | current |
| aePwe3T1Interval24LCV OBJECT-TYPE The number of line code violations. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.3 | Counter32 | read-only | current |
| aePwe3T1Interval24ES OBJECT-TYPE The number of errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.4 | Counter32 | read-only | current |
| aePwe3T1Interval24SES OBJECT-TYPE The number of severely errored seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.5 | Counter32 | read-only | current |
| aePwe3T1Interval24UAS OBJECT-TYPE The number of unavailable seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.6 | Counter32 | read-only | current |
| aePwe3T1Interval24CSS OBJECT-TYPE The number of controlled slip seconds. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.7 | Counter32 | read-only | current |
| aePwe3T1Interval24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.8.1.8 | PerfInvalidFlag | read-only | current |
| aePwe3AggCurrent15Table OBJECT-TYPE The aggregate bundle table contains statistics for the aggregate (i.e. Ethernet) PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.9 | not-accessible | current | |
| aePwe3AggCurrent15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1 | not-accessible | current | |
| aePwe3AggCurrent15Instance OBJECT-TYPE Index for the aggregate PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.1 | AePwe3AggInstance | read-only | current |
| aePwe3AggCurrent15RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.2 | Counter32 | read-only | current |
| aePwe3AggCurrent15RxByte OBJECT-TYPE Total number of bytes received. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.3 | Counter32 | read-only | current |
| aePwe3AggCurrent15TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.4 | Counter32 | read-only | current |
| aePwe3AggCurrent15TxByte OBJECT-TYPE Total number of bytes transmitted. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.5 | Counter32 | read-only | current |
| aePwe3AggCurrent15ClassifiedPacket OBJECT-TYPE Total number of received packets that have passed classification. Packet classification is performed on each packet received to determine if the packet is truly intended for this interface. If the packet passes classification, it is passed through to the intended T1 interface. Under normal conditions, the received packet count and the classified packet count will be incrementing at the same rate. If the received packet count is increasing faster than the classified packet count, this is an indication that stray packets are being received by the interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.6 | Counter32 | read-only | current |
| aePwe3AggCurrent15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.7 | PerfInvalidFlag | read-only | current |
| aePwe3AggCurrent15ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.9.1.8 | AeThresholdCrossingPointer | read-write | current |
| aePwe3AggInterval15Table OBJECT-TYPE The aggregate bundle table contains statistics for the specified interval and aggregate (i.e. Ethernet) PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.10 | not-accessible | current | |
| aePwe3AggInterval15Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1 | not-accessible | current | |
| aePwe3AggInterval15Instance OBJECT-TYPE Index for the aggregate PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.1 | AePwe3AggInstance | read-only | current |
| aePwe3AggInterval15Interval OBJECT-TYPE There are 32 15-minute bucket intervals. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.2 | INTEGER (1..96) | read-only | current |
| aePwe3AggInterval15RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.3 | Counter32 | read-only | current |
| aePwe3AggInterval15RxByte OBJECT-TYPE Total number of bytes received. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.4 | Counter32 | read-only | current |
| aePwe3AggInterval15TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.5 | Counter32 | read-only | current |
| aePwe3AggInterval15TxByte OBJECT-TYPE Total number of bytes transmitted. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.6 | Counter32 | read-only | current |
| aePwe3AggInterval15ClassifiedPacket OBJECT-TYPE Total number of received packets that have passed classification. Packet classification is performed on each packet received to determine if the packet is truly intended for this interface. If the packet passes classification, it is passed through to the intended T1 interface. Under normal conditions, the received packet count and the classified packet count will be incrementing at the same rate. If the received packet count is increasing faster than the classified packet count, this is an indication that stray packets are being received by the interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.7 | Counter32 | read-only | current |
| aePwe3AggInterval15ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.10.1.8 | PerfInvalidFlag | read-only | current |
| aePwe3AggCurrent24Table OBJECT-TYPE The aggregate bundle table contains statistics for the aggregate (i.e. Ethernet) PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.11 | not-accessible | current | |
| aePwe3AggCurrent24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1 | not-accessible | current | |
| aePwe3AggCurrent24Instance OBJECT-TYPE Index for the aggregate PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.1 | AePwe3AggInstance | read-only | current |
| aePwe3AggCurrent24RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.2 | Counter32 | read-only | current |
| aePwe3AggCurrent24RxByte OBJECT-TYPE Total number of bytes received. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.3 | Counter32 | read-only | current |
| aePwe3AggCurrent24TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.4 | Counter32 | read-only | current |
| aePwe3AggCurrent24TxByte OBJECT-TYPE Total number of bytes transmitted. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.5 | Counter32 | read-only | current |
| aePwe3AggCurrent24ClassifiedPacket OBJECT-TYPE Total number of received packets that have passed classification. Packet classification is performed on each packet received to determine if the packet is truly intended for this interface. If the packet passes classification, it is passed through to the intended T1 interface. Under normal conditions, the received packet count and the classified packet count will be incrementing at the same rate. If the received packet count is increasing faster than the classified packet count, this is an indication that stray packets are being received by the interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.6 | Counter32 | read-only | current |
| aePwe3AggCurrent24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.7 | PerfInvalidFlag | read-only | current |
| aePwe3AggCurrent24ThresholdCrossingPointer OBJECT-TYPE Indicates the index of the threshold crossing entry. Threshold crossings are not implemented. | 1.3.6.1.4.1.6321.1.2.5.5.2.11.1.8 | AeThresholdCrossingPointer | read-write | current |
| aePwe3AggInterval24Table OBJECT-TYPE The aggregate bundle table contains statistics for the specified interval and aggregate (i.e. Ethernet) PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.12 | not-accessible | current | |
| aePwe3AggInterval24Entry OBJECT-TYPE | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1 | not-accessible | current | |
| aePwe3AggInterval24Instance OBJECT-TYPE Index for the aggregate PWE3 interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.1 | AePwe3AggInstance | read-only | current |
| aePwe3AggInterval24Interval OBJECT-TYPE There are 2 24-hour interval (yesterday). | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.2 | INTEGER (1) | read-only | current |
| aePwe3AggInterval24RxPacket OBJECT-TYPE Total number of packets received. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.3 | Counter32 | read-only | current |
| aePwe3AggInterval24RxByte OBJECT-TYPE Total number of bytes received. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.4 | Counter32 | read-only | current |
| aePwe3AggInterval24TxPacket OBJECT-TYPE Total number of packets transmitted. Under normal conditions, the received and transmitted counts will be incrementing at the same rate. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.5 | Counter32 | read-only | current |
| aePwe3AggInterval24TxByte OBJECT-TYPE Total number of bytes transmitted. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.6 | Counter32 | read-only | current |
| aePwe3AggInterval24ClassifiedPacket OBJECT-TYPE Total number of received packets that have passed classification. Packet classification is performed on each packet received to determine if the packet is truly intended for this interface. If the packet passes classification, it is passed through to the intended T1 interface. Under normal conditions, the received packet count and the classified packet count will be incrementing at the same rate. If the received packet count is increasing faster than the classified packet count, this is an indication that stray packets are being received by the interface. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.7 | Counter32 | read-only | current |
| aePwe3AggInterval24ValidData OBJECT-TYPE Indicates the validity of the data in the bucket. | 1.3.6.1.4.1.6321.1.2.5.5.2.12.1.8 | PerfInvalidFlag | read-only | current |