MIBs Depot

ADVANTECH-EKI-PRONEER-MIB

Registered at
1.3.6.1.4.1.10297
Last updated
2014-12-02 00:00
Organization
Advantech iConnectivity Group
Revisions
2014-12-02 00:00
Namespace
advantech
Source file
ADVANTECH-EKI-PRONEER-MIB
Digest
sha256:63b14a6a3f6e2034acb7393d1dc558ed255b03397ab97611c757ad32268c016d

Description

The MIB module is for Advantech switch, e.g. EKI-XXXX, etc. Copyright (C) Advantech iConnectivity Group(2014).

Contact

Advantech iConnectivity ICOM E-mail: ICG.Support@advantech.com.tw Guider.Lee@advantech.com.tw

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVANTECH-EKI-PRONEER-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.10297.100advantechCommonMIBADVANTECH-COMMON-MIB

Objects

NameOIDSyntaxAccessStatus
aSwitchMIB
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202
proneer
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000
monitoring
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1
deviceInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.1
systemName
OBJECT-TYPE
System name of the switch
1.3.6.1.4.1.10297.202.7000.1.1.1DisplayString (SIZE(0..128))read-writecurrent
systemLocation
OBJECT-TYPE
System location of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.2DisplayString (SIZE(0..255))read-writecurrent
systemContact
OBJECT-TYPE
System contact of the switch
1.3.6.1.4.1.10297.202.7000.1.1.3DisplayString (SIZE(0..255))read-writecurrent
macAddress
OBJECT-TYPE
MAC address of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.4DisplayStringread-onlycurrent
ipAddress
OBJECT-TYPE
IP address of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.5IpAddressread-onlycurrent
subnetMask
OBJECT-TYPE
Subnet mask of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.6IpAddressread-onlycurrent
gateway
OBJECT-TYPE
Default gateway of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.7IpAddressread-onlycurrent
loaderVersion
OBJECT-TYPE
Boot loader version of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.8DisplayStringread-onlycurrent
loaderDate
OBJECT-TYPE
Boot loader date of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.9DisplayStringread-onlycurrent
firmwareVersion
OBJECT-TYPE
Firmware version of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.10DisplayStringread-onlycurrent
firmwareDate
OBJECT-TYPE
Firmware release date of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.11DisplayStringread-onlycurrent
systemObjectID
OBJECT-TYPE
SNMP system object ID of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.12OBJECT IDENTIFIERread-onlycurrent
systemUpTime
OBJECT-TYPE
The time since the switch was last re-initialized.
1.3.6.1.4.1.10297.202.7000.1.1.13TimeTicksread-onlycurrent
ledStatus
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.1.14
ledSYSStatus
OBJECT-TYPE
The LED status of system operating.
1.3.6.1.4.1.10297.202.7000.1.1.14.1INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledRMStatus
OBJECT-TYPE
The LED status of ring master.
1.3.6.1.4.1.10297.202.7000.1.1.14.2INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledPWR1Status
OBJECT-TYPE
The LED status of power input 1.
1.3.6.1.4.1.10297.202.7000.1.1.14.3INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledPWR2Status
OBJECT-TYPE
The LED status of power input 2.
1.3.6.1.4.1.10297.202.7000.1.1.14.4INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledAlarmStatus
OBJECT-TYPE
The LED status of alarm.
1.3.6.1.4.1.10297.202.7000.1.1.14.5INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledPFAILStatus
OBJECT-TYPE
The LED status of P-Fail.
1.3.6.1.4.1.10297.202.7000.1.1.14.6INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledRFAILStatus
OBJECT-TYPE
The LED status of R-Fail.
1.3.6.1.4.1.10297.202.7000.1.1.14.7INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledLOOPStatus
OBJECT-TYPE
The LED status of loop detection.
1.3.6.1.4.1.10297.202.7000.1.1.14.8INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
ledTempStatus
OBJECT-TYPE
The LED status of system temperature.
1.3.6.1.4.1.10297.202.7000.1.1.14.9INTEGER {notSupported(0), up(1), down(2)}read-onlycurrent
buildVersion
OBJECT-TYPE
Build version of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.15DisplayStringread-onlycurrent
loggingMessage
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.2
loggingBufferTable
OBJECT-TYPE
The table of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1not-accessiblecurrent
loggingBufferEntry
OBJECT-TYPE
The entry of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1.1not-accessiblecurrent
loggingBufferIndex
OBJECT-TYPE
The index of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1.1.1Integer32 (1..65535)not-accessiblecurrent
loggingBufferSeverity
OBJECT-TYPE
The severity of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.2INTEGER {emerg(0), alert(1), crit(2), error(3), warning(4), notice(5), info(6), debug(7)}read-onlycurrent
loggingBufferCategory
OBJECT-TYPE
The category of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.3DisplayStringread-onlycurrent
loggingBufferTimeStamp
OBJECT-TYPE
The time stamp of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.4DisplayStringread-onlycurrent
loggingBufferMessage
OBJECT-TYPE
The messge of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.5DisplayStringread-onlycurrent
clearBufferedMsg
OBJECT-TYPE
Delete the logging message in buffer.
1.3.6.1.4.1.10297.202.7000.1.2.2INTEGER {clear(1)}read-writecurrent
loggingFileTable
OBJECT-TYPE
The table of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3not-accessiblecurrent
loggingFileEntry
OBJECT-TYPE
The entry of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1not-accessiblecurrent
loggingFileIndex
OBJECT-TYPE
The index of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.1Integer32 (1..65535)not-accessiblecurrent
loggingFileSeverity
OBJECT-TYPE
The severity of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.2INTEGER {emerg(0), alert(1), crit(2), error(3), warning(4), notice(5), info(6), debug(7)}read-onlycurrent
loggingFileCategory
OBJECT-TYPE
The category of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.3DisplayStringread-onlycurrent
loggingFileTimeStamp
OBJECT-TYPE
The time stamp of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.4DisplayStringread-onlycurrent
loggingFileMessage
OBJECT-TYPE
The message of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.5DisplayStringread-onlycurrent
clearFileMsg
OBJECT-TYPE
Delete the logging message in file.
1.3.6.1.4.1.10297.202.7000.1.2.4INTEGER {clear(1)}read-writecurrent
portMonitoring
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.3
portStatisticTable
OBJECT-TYPE
The table of the RMON counters.
1.3.6.1.4.1.10297.202.7000.1.3.1not-accessiblecurrent
portStatisticEntry
OBJECT-TYPE
The entry of the RMON counters.
1.3.6.1.4.1.10297.202.7000.1.3.1.1not-accessiblecurrent
portStatisticIndex
OBJECT-TYPE
The port index of the port counters.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.1Integer32 (1..65535)read-onlycurrent
portCounterClear
OBJECT-TYPE
Clear the port counter.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.2INTEGER {nothing(0), clear(1)}read-writecurrent
ifInOctets
OBJECT-TYPE
The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.3Integer32read-onlycurrent
ifInUcastPkts
OBJECT-TYPE
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.4Integer32read-onlycurrent
ifInNUcastPkts
OBJECT-TYPE
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.5Integer32read-onlycurrent
ifInDiscards
OBJECT-TYPE
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime
1.3.6.1.4.1.10297.202.7000.1.3.1.1.6Integer32read-onlycurrent
ifOutOctets
OBJECT-TYPE
The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.7Integer32read-onlycurrent
ifOutUcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.8Integer32read-onlycurrent
ifOutNUcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifOutMulticastPkts and ifOutBroadcastPkts.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.9Integer32read-onlycurrent
ifOutDiscards
OBJECT-TYPE
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.10Integer32read-onlycurrent
ifInMulticastPkts
OBJECT-TYPE
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.11Integer32read-onlycurrent
ifInBroadcastPkts
OBJECT-TYPE
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.12Integer32read-onlycurrent
ifOutMulticastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.13Integer32read-onlycurrent
ifOutBroadcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.14Integer32read-onlycurrent
dot3StatsAlignmentErrors
OBJECT-TYPE
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. This counter does not increment for group encoding schemes greater than 4 bits per group. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsAlignmentErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.15Integer32read-onlycurrent
dot3StatsFCSErrors
OBJECT-TYPE
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.16Integer32read-onlycurrent
dot3StatsSingleCollisionFrames
OBJECT-TYPE
A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.17Integer32read-onlycurrent
dot3StatsMultipleCollisionFrames
OBJECT-TYPE
A count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.18Integer32read-onlycurrent
dot3StatsDeferredTransmissions
OBJECT-TYPE
A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.19Integer32read-onlycurrent
dot3StatsLateCollisions
OBJECT-TYPE
The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.20Integer32read-onlycurrent
dot3StatsExcessiveCollisions
OBJECT-TYPE
A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.21Integer32read-onlycurrent
dot3StatsFrameTooLongs
OBJECT-TYPE
A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. For interfaces operating at 10 Gb/s, this counter can roll over in less than 80 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFrameTooLongs object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.22Integer32read-onlycurrent
dot3StatsSymbolErrors
OBJECT-TYPE
For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than slotTime, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' or 'carrier extend error' on the GMII. For an interface operating in full-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' on the GMII. For an interface operating at 10 Gb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Receive Error' on the XGMII. The count represented by an instance of this object is incremented at most once per carrier event, even if multiple symbol errors occur during the carrier event. This count does not increment if a collision is present. This counter does not increment when the interface is operating at 10 Mb/s. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsSymbolErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.23Integer32read-onlycurrent
dot3ControlInUnknownOpcodes
OBJECT-TYPE
A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.24Integer32read-onlycurrent
dot3InPauseFrames
OBJECT-TYPE
A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCInPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.25Integer32read-onlycurrent
dot3OutPauseFrames
OBJECT-TYPE
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.26Integer32read-onlycurrent
linkAggregation
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.4
lagStatusTable
OBJECT-TYPE
The table of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1not-accessiblecurrent
lagStatusEntry
OBJECT-TYPE
The entry of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1.1not-accessiblecurrent
lagStatusIndex
OBJECT-TYPE
The name of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1.1.1Integer32 (1..65535)read-onlycurrent
lagStatusName
OBJECT-TYPE
The LAG port description
1.3.6.1.4.1.10297.202.7000.1.4.1.1.2DisplayStringread-onlycurrent
lagStatusType
OBJECT-TYPE
The type of the LAG. Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candidate ports. LACP determines which candidate ports are active member ports.
1.3.6.1.4.1.10297.202.7000.1.4.1.1.3INTEGER {static(1), lacp(2), none(3)}read-onlycurrent
lagStatusLinkState
OBJECT-TYPE
LAG port link status
1.3.6.1.4.1.10297.202.7000.1.4.1.1.4INTEGER {up(1), down(2), notPresent(3)}read-onlycurrent
lagStatusActiveMember
OBJECT-TYPE
Active member ports of the LAG
1.3.6.1.4.1.10297.202.7000.1.4.1.1.5DisplayStringread-onlycurrent
lagStatusStandbyMember
OBJECT-TYPE
Inactive or candudate member ports of the LAG
1.3.6.1.4.1.10297.202.7000.1.4.1.1.6DisplayStringread-onlycurrent
lacpInfoTable
OBJECT-TYPE
The table of LACP
1.3.6.1.4.1.10297.202.7000.1.4.2not-accessiblecurrent
lacpInfoEntry
OBJECT-TYPE
The entry of LACP
1.3.6.1.4.1.10297.202.7000.1.4.2.1not-accessiblecurrent
lacpInfoLagIndex
OBJECT-TYPE
The LACP name
1.3.6.1.4.1.10297.202.7000.1.4.2.1.1DisplayStringread-onlycurrent
lacpInfoPortIndex
OBJECT-TYPE
Member port name
1.3.6.1.4.1.10297.202.7000.1.4.2.1.2DisplayStringread-onlycurrent
lacpInfoPartnerSysId
OBJECT-TYPE
The system ID of link partner.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.3DisplayStringread-onlycurrent
lacpInfoPnkey
OBJECT-TYPE
Port key of partner
1.3.6.1.4.1.10297.202.7000.1.4.2.1.4DisplayStringread-onlycurrent
lacpInfoAtkey
OBJECT-TYPE
Port key of actor
1.3.6.1.4.1.10297.202.7000.1.4.2.1.5DisplayStringread-onlycurrent
lacpInfoSel
OBJECT-TYPE
LACP selection logic status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.6DisplayStringread-onlycurrent
lacpInfoMux
OBJECT-TYPE
LACP mux state machine status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.7DisplayStringread-onlycurrent
lacpInfoReceiv
OBJECT-TYPE
LACP receive state machine status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.8DisplayStringread-onlycurrent
lacpInfoPrdtx
OBJECT-TYPE
LACP periodic transmission state machine status of the port.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.9DisplayStringread-onlycurrent
lacpInfoAtstat
OBJECT-TYPE
The actor state field of LACP PDU description.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.10DisplayStringread-onlycurrent
lacpInfoPnstat
OBJECT-TYPE
The partner state field of LACP PDU description.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.11DisplayStringread-onlycurrent
lldpStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.5
lldpClearStatistics
OBJECT-TYPE
Clear the LLDP statistics
1.3.6.1.4.1.10297.202.7000.1.5.1INTEGER {clear(1)}read-writecurrent
inertions
OBJECT-TYPE
The number of times the complete set of infomation advertised by a partcular MAC Service Access Point(MSAP) has been inserted into tables associated with the remote systems
1.3.6.1.4.1.10297.202.7000.1.5.2Integer32read-onlycurrent
deletions
OBJECT-TYPE
The number of times the complete set of infomation advertised by MSAP has been deleted from tables associated with the remote systems
1.3.6.1.4.1.10297.202.7000.1.5.3Integer32read-onlycurrent
drops
OBJECT-TYPE
The number of times the complete set of information advertised by MSAP could not be entered into tables associated with the remote systems because of insufficient resources.
1.3.6.1.4.1.10297.202.7000.1.5.4Integer32read-onlycurrent
ageouts
OBJECT-TYPE
The number of times the complete set of information advertised by MSAP has been deleted from tables associated with the remote systems because the information timeliness interval has expired.
1.3.6.1.4.1.10297.202.7000.1.5.5Integer32read-onlycurrent
lldpPortStatisticsTable
OBJECT-TYPE
The table of LLDP port statistics
1.3.6.1.4.1.10297.202.7000.1.5.6not-accessiblecurrent
lldpPortStatisticsEntry
OBJECT-TYPE
The entry of LLDP port statistics
1.3.6.1.4.1.10297.202.7000.1.5.6.1not-accessiblecurrent
lldpPortStatIndex
OBJECT-TYPE
Interface or port number.
1.3.6.1.4.1.10297.202.7000.1.5.6.1.1Integer32 (1..65535)read-onlycurrent
lldpPortStatTotalTxFrame
OBJECT-TYPE
Number of LLDP frames transmitted on the corresponding port.
1.3.6.1.4.1.10297.202.7000.1.5.6.1.2Integer32read-onlycurrent
lldpPortStatTotalRxFrame
OBJECT-TYPE
Number of LLDP frames received by this LLDP agent on the corresponding port, while the LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.3Integer32read-onlycurrent
lldpPortStatDiscardRxFrame
OBJECT-TYPE
Number of LLDP frames discard for any reason by this LLDP agent on the corresponding port
1.3.6.1.4.1.10297.202.7000.1.5.6.1.4Integer32read-onlycurrent
lldpPortStatErrorRxFrame
OBJECT-TYPE
Number of invalid LLDP frames received by the LLDP agent on the corresponding port, while the LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.5Integer32read-onlycurrent
lldpPortStatDiscardRxTlv
OBJECT-TYPE
Number of TLVs LLDP frames discard for any reason by this LLDP agent on the corresponding port
1.3.6.1.4.1.10297.202.7000.1.5.6.1.6Integer32read-onlycurrent
lldpPortStatUnrecognizedRxTlv
OBJECT-TYPE
Number of TLVs LLDP frames that are unrecognized while this LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.7Integer32read-onlycurrent
lldpPortStatTotalRxAgeouts
OBJECT-TYPE
Number of age out LLDP frames
1.3.6.1.4.1.10297.202.7000.1.5.6.1.8Integer32read-onlycurrent
igmpStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.6
totalRx
OBJECT-TYPE
IGMP snooping total Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.1Integer32read-onlycurrent
validRx
OBJECT-TYPE
IGMP snooping valid Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.2Integer32read-onlycurrent
invalidRx
OBJECT-TYPE
IGMP snooping invalid Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.3Integer32read-onlycurrent
otherRx
OBJECT-TYPE
IGMP snooping other Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.4Integer32read-onlycurrent
leaveRx
OBJECT-TYPE
IGMP snooping leave Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.5Integer32read-onlycurrent
reportRx
OBJECT-TYPE
IGMP snooping report Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.6Integer32read-onlycurrent
generalQueryRx
OBJECT-TYPE
IGMP snooping general query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.7Integer32read-onlycurrent
specialGroupQueryRx
OBJECT-TYPE
IGMP snooping special group query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.8Integer32read-onlycurrent
specialGroupSourceQueryRx
OBJECT-TYPE
IGMP snooping special group source query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.9Integer32read-onlycurrent
leaveTx
OBJECT-TYPE
IGMP snooping leave Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.10Integer32read-onlycurrent
reportTx
OBJECT-TYPE
IGMP snooping report Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.11Integer32read-onlycurrent
generalQueryTx
OBJECT-TYPE
IGMP snooping general query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.12Integer32read-onlycurrent
specialGroupQueryTx
OBJECT-TYPE
IGMP snooping special group query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.13Integer32read-onlycurrent
specialGroupSourceQueryTx
OBJECT-TYPE
IGMP snooping special group source query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.14Integer32read-onlycurrent
clearigmpStatistics
OBJECT-TYPE
Clear IGMP snooping statistics counter
1.3.6.1.4.1.10297.202.7000.1.6.15INTEGER {clear(1)}read-writecurrent
mldStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.1.7
mldtotalRx
OBJECT-TYPE
MLD total Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.1Integer32read-onlycurrent
mldvalidRx
OBJECT-TYPE
MLD valid Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.2Integer32read-onlycurrent
mldinvalidRx
OBJECT-TYPE
MLD invalid Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.3Integer32read-onlycurrent
mldotherRx
OBJECT-TYPE
MLD other Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.4Integer32read-onlycurrent
mldleaveRx
OBJECT-TYPE
MLD leave Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.5Integer32read-onlycurrent
mldreportRx
OBJECT-TYPE
MLD report Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.6Integer32read-onlycurrent
mldgeneralQueryRx
OBJECT-TYPE
MLD general query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.7Integer32read-onlycurrent
mldspecialGroupQueryRx
OBJECT-TYPE
MLD special group query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.8Integer32read-onlycurrent
mldspecialGroupSourceQueryRx
OBJECT-TYPE
MLD special group source query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.9Integer32read-onlycurrent
mldleaveTx
OBJECT-TYPE
MLD leave Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.10Integer32read-onlycurrent
mldreportTx
OBJECT-TYPE
MLD report Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.11Integer32read-onlycurrent
mldgeneralQueryTx
OBJECT-TYPE
MLD general query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.12Integer32read-onlycurrent
mldspecialGroupQueryTx
OBJECT-TYPE
MLD special group query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.13Integer32read-onlycurrent
mldspecialGroupSourceQueryTx
OBJECT-TYPE
MLD special group source query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.14Integer32read-onlycurrent
clearmldStatistics
OBJECT-TYPE
Clear MLD statistics counter
1.3.6.1.4.1.10297.202.7000.1.7.15INTEGER {clear(1)}read-writecurrent
system
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2
ipSettings
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.1
ipv4Mode
OBJECT-TYPE
the mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
1.3.6.1.4.1.10297.202.7000.2.1.1INTEGER {static(1), dhcp(2)}read-writecurrent
ipv4Address
OBJECT-TYPE
If static mode is enabled, enter IP address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.2IpAddressread-writecurrent
ipv4SubnetMask
OBJECT-TYPE
If static mode is enabled, enter subnet mask in this field.
1.3.6.1.4.1.10297.202.7000.2.1.3IpAddressread-writecurrent
ipv4Gateway
OBJECT-TYPE
If static mode is enabled, enter gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.4IpAddressread-writecurrent
ipv4DnsServer1
OBJECT-TYPE
If static mode is enabled, enter primary DNS server address in this field
1.3.6.1.4.1.10297.202.7000.2.1.5IpAddressread-writecurrent
ipv4DnsServer2
OBJECT-TYPE
If static mode is enabled, enter secondary DNS server address in this field
1.3.6.1.4.1.10297.202.7000.2.1.6IpAddressread-writecurrent
interfaceIpv4Table
OBJECT-TYPE
The table of interface IP address
1.3.6.1.4.1.10297.202.7000.2.1.7not-accessiblecurrent
interfaceIpv4Entry
OBJECT-TYPE
The entry of interface IP address
1.3.6.1.4.1.10297.202.7000.2.1.7.1not-accessiblecurrent
interfaceIpv4Index
OBJECT-TYPE
The index of interface IPv4 table
1.3.6.1.4.1.10297.202.7000.2.1.7.1.1Integer32 (1..32)read-onlycurrent
interfaceIpv4Vlan
OBJECT-TYPE
The VLAN ID of interface IPv4 table
1.3.6.1.4.1.10297.202.7000.2.1.7.1.2Integer32 (1..4094)read-onlycurrent
interfaceIpv4Mode
OBJECT-TYPE
the mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.3INTEGER {static(1), dhcp(2)}read-writecurrent
interfaceIpv4Address
OBJECT-TYPE
If static mode is enabled, enter IP address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.4IpAddressread-writecurrent
interfaceIpv4SubnetMask
OBJECT-TYPE
If static mode is enabled, enter subnet mask in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.5IpAddressread-writecurrent
interfaceIpv4Gateway
OBJECT-TYPE
If static mode is enabled, enter gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.6IpAddressread-writecurrent
interCurrIpv4DhcpState
OBJECT-TYPE
The current status of IPv4 DHCP.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.7INTEGER {enable(1), disable(2)}read-onlycurrent
interCurrIpv4Address
OBJECT-TYPE
The current IPv4 address
1.3.6.1.4.1.10297.202.7000.2.1.7.1.8IpAddressread-onlycurrent
interCurrIpv4SubnetMask
OBJECT-TYPE
The current IPv4 subnet mask
1.3.6.1.4.1.10297.202.7000.2.1.7.1.9IpAddressread-onlycurrent
interCurrIpv4Gateway
OBJECT-TYPE
The current IPv4 gateway.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.10IpAddressread-onlycurrent
ipv6Settings
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.2
autoConfiguration
OBJECT-TYPE
IPv6 Auto Configuration state.
1.3.6.1.4.1.10297.202.7000.2.2.1INTEGER {enable(1), disable(2)}read-writecurrent
ipv6Address
OBJECT-TYPE
If auto configuration mode is disabled, enter IPv6 address in this field.
1.3.6.1.4.1.10297.202.7000.2.2.2DisplayStringread-writecurrent
ipv6SubnetMask
OBJECT-TYPE
If auto configuration mode is disabled, enter IPv6 submask in this field.
1.3.6.1.4.1.10297.202.7000.2.2.3Integer32 (0..128)read-writecurrent
ipv6Gateway
OBJECT-TYPE
If auto configuration mode is disabled, enter IPv6 gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.2.4DisplayStringread-writecurrent
dhcpv6Client
OBJECT-TYPE
DHCPv6 client state
1.3.6.1.4.1.10297.202.7000.2.2.5INTEGER {enable(1), disable(2)}read-writecurrent
ipv6InUseTable
OBJECT-TYPE
The table of in-use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6not-accessiblecurrent
ipv6InUseEntry
OBJECT-TYPE
The entry of in-use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6.1not-accessiblecurrent
ipv6InUseIndex
OBJECT-TYPE
The current use IPv6 submask
1.3.6.1.4.1.10297.202.7000.2.2.6.1.1Integer32 (1..32)read-onlycurrent
ipv6InUseAddress
OBJECT-TYPE
The current use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6.1.2DisplayStringread-onlycurrent
ipv6InUseSubnetMask
OBJECT-TYPE
The current use IPv6 submask
1.3.6.1.4.1.10297.202.7000.2.2.6.1.3Integer32read-onlycurrent
ipv6InUseRouter
OBJECT-TYPE
The current use IPv6 router address
1.3.6.1.4.1.10297.202.7000.2.2.7DisplayStringread-onlycurrent
dhcpv6DUID
OBJECT-TYPE
The DHCPv6 DUID
1.3.6.1.4.1.10297.202.7000.2.2.8DisplayStringread-onlycurrent
dhcpv6IPAddress
OBJECT-TYPE
The DHCPv6 IP address
1.3.6.1.4.1.10297.202.7000.2.2.9DisplayStringread-onlycurrent
managementVlan
OBJECT-TYPE
This allows the entry of a VLAN from which a management station will be allowed to manage the device using TCP/IP (in-band via web manager or Telnet). Management stations that are on VLANs other than the one seleted here will not be able to manage the Switch. The default management VLAN is VLAN 1.
1.3.6.1.4.1.10297.202.7000.2.3Integer32 (1..4094)read-writecurrent
systemTime
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4
systemTimeSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1
enableSNTP
OBJECT-TYPE
enable or disable using SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.1.1INTEGER {enable(1), disable(2)}read-writecurrent
manualTime
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1.2
year
OBJECT-TYPE
The year of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.1Integer32 (2000..2035)read-writecurrent
month
OBJECT-TYPE
The month of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.2Integer32 (1..12)read-writecurrent
day
OBJECT-TYPE
The day of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.3Integer32 (1..31)read-writecurrent
hours
OBJECT-TYPE
The hour of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.4Integer32 (0..23)read-writecurrent
minutes
OBJECT-TYPE
The minutes of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.5Integer32 (0..59)read-writecurrent
seconds
OBJECT-TYPE
The second of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.6Integer32 (0..59)read-writecurrent
timeZone
OBJECT-TYPE
The UTC Timezone of the switch.
1.3.6.1.4.1.10297.202.7000.2.4.1.3INTEGER {none(0), gmtminus1200-International-Date-Line-West(1), gmtminus1100-MidwayIsland-Samoa(2), gmtminus1000-Hawaii(3), gmtminus0900-Alaska(4), gmtminus0800-Pacific-Time-US-and-Canada(5), gmtminus0800-Tijuana-Baja-California(6), gmtminus0700-Arizona(7), gmtminus0700-Chihuahua-La-Paz-Mazatlan-New(8), gmtminus0700-Chihuahua-La-Paz-Mazatlan-Old(9), gmtminus0700-Mountain-Time-US-and-Canada(10), gmtminus0600-Central-America(11), gmtminus0600-Central-Time-US-and-Canada(12), gmtminus0600-Guadalajara-Mexico-City-Monterrey-New(13), gmtminus0600-Guadalajara-Mexico-City-Monterrey-Old(14), gmtminus0600-Saskatchewan(15), gmtminus0500-Bogota-Lima-Quito-Rio-Branco(16), gmtminus0500-Eastern-Time-US-and-Canada(17), gmtminus0500-Indiana-East(18), gmtminus0430-Caracas(19), gmtminus0400-Atlantic-Time-Canada(20), gmtminus0400-La-Paz(21), gmtminus0400-Manaus(22), gmtminus0400-Santiago(23), gmtminus0330-Newfoundland(24), gmtminus0300-Brasilia(25), gmtminus0300-Buenos-Aires(26), gmtminus0300-Georgetown(27), gmtminus0300-Greenland(28), gmtminus0300-Montevideo(29), gmtminus0200-Mid-Atlantic(30), gmtminus0100-Azores(31), gmtminus0100-Cape-Verde-Is(32), gmt-Casablanca(33), gmt-Greenwich-Mean-Time-Dublin-Edinburgh-Lisbon-London(34), gmt-Monrovia-Reykjavik(35), gmtplus0100-Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna(36), gmtplus0100-Belgrade-Bratislava-Budapest-Ljubljana-Prague(37), gmtplus0100-Brussels-Copenhagen-Madrid-Paris(38), gmtplus0100-Sarajevo-Skopje-Warsaw-Zagreb(39), gmtplus0100-West-Central-Africa(40), gmtplus0200-Amman(41), gmtplus0200-Athens-Bucharest-Istanbul(42), gmtplus0200-Beirut(43), gmtplus0200-Cairo(44), gmtplus0200-Harare-Pretoria(45), gmtplus0200-Helsinki-Kyiv-Riga-Sofia-Tallinn-Vilnius(46), gmtplus0200-Jerusalem(47), gmtplus0200-Minsk(48), gmtplus0200-Windhoek(49), gmtplus0300-Baghdad(50), gmtplus0300-Kuwait-Riyadh(51), gmtplus0300-Moscow-St-Petersburg-Volgograd(52), gmtplus0300-Nairobi(53), gmtplus0300-Tbilisi(54), gmtplus0330-Tehran(55), gmtplus0400-Abu-Dhabi-Muscat(56), gmtplus0400-Baku(57), gmtplus0400-Caucasus-Standard-Time(58), gmtplus0400-Port-Louis(59), gmtplus0400-Yerevan(60), gmtplus0430-Kabul(61), gmtplus0500-Ekaterinburg(62), gmtplus0500-Islamabad-Karachi(63), gmtplus0500-Tashkent(64), gmtplus0530-Chennai-Kolkata-Mumbai-New-Delhi(65), gmtplus0530-Sri-Jayawardenepura(66), gmtplus0545-Kathmandu(67), gmtplus0600-Almaty-Novosibirsk(68), gmtplus0600-Astana-Dhaka(69), gmtplus0630-Yangon-Rangoon(70), gmtplus0700-Bangkok-Hanoi-Jakarta(71), gmtplus0700-Krasnoyarsk(72), gmtplus0800-Beijing-Chongqing-Hong-Kong-Urumqi(73), gmtplus0800-Irkutsk-Ulaan-Bataar(74), gmtplus0800-Kuala-Lumpur-Singapore(75), gmtplus0800-Perth(76), gmtplus0800-Taipei(77), gmtplus0900-Osaka-Sapporo-Tokyo(78), gmtplus0900-Seoul(79), gmtplus0900-Yakutsk(80), gmtplus0930-Adelaide(81), gmtplus0930-Darwin(82), gmtplus1000-Brisbane(83), gmtplus1000-Canberra-Melbourne-Sydney(84), gmtplus1000-Guam-Port-Moresby(85), gmtplus1000-Hobart(86), gmtplus1000-Vladivostok(87), gmtplus1100-Magadan-Solomon-Is-New-Caledonia(88), gmtplus1200-Auckland-Wellington(89), gmtplus1200-Fiji-Kamchatka-Marshall-Is(90), gmtplus1300-Nuku-alofa(91)}read-writecurrent
daylightSaving
OBJECT-TYPE
the mode of daylight saving time. Disable: Disable daylight saving time. Recurring: Using recurring mode of daylight saving time Non-Recurring: Using non-recurring mode of daylight saving time USA: Using daylight saving time in the United States that starts on the second Sunday of March and ends on the first Sunday of November European: daylight saving time in the Europe that starts on the last Sunday of March and ends on the last Sunday of November
1.3.6.1.4.1.10297.202.7000.2.4.1.4INTEGER {disable(1), recurring(2), no-recurring(3), usa(4), european(5)}read-writecurrent
daylightSavingOffset
OBJECT-TYPE
Specify the adjust offset of daylight saving time
1.3.6.1.4.1.10297.202.7000.2.4.1.5Integer32 (1..1440)read-writecurrent
recurringFrom
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1.6
recFromDay
OBJECT-TYPE
The starting day of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.1Integer32 (1..7)read-writecurrent
recFromWeek
OBJECT-TYPE
The starting week of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.2Integer32 (1..5)read-writecurrent
recFromMonth
OBJECT-TYPE
The starting month of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.3Integer32 (1..12)read-writecurrent
recFromHours
OBJECT-TYPE
The starting hour of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.4Integer32 (0..23)read-writecurrent
recFromMinutes
OBJECT-TYPE
The starting minutes of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.5Integer32 (0..59)read-writecurrent
recurringTo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1.7
recToDay
OBJECT-TYPE
The ending day of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.1Integer32 (1..7)read-writecurrent
recToWeek
OBJECT-TYPE
The ending week of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.2Integer32 (1..5)read-writecurrent
recToMonth
OBJECT-TYPE
The ending month of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.3Integer32 (1..12)read-writecurrent
recToHours
OBJECT-TYPE
The ending hour of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.4Integer32 (0..23)read-writecurrent
recToMinutes
OBJECT-TYPE
The ending minute of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.5Integer32 (0..59)read-writecurrent
nonRecurringFrom
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1.8
nonRecFromYear
OBJECT-TYPE
The starting year of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.1Integer32 (2000..2037)read-writecurrent
nonRecFromMonth
OBJECT-TYPE
The starting month of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.2Integer32 (1..12)read-writecurrent
nonRecFromDay
OBJECT-TYPE
The starting day of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.3Integer32 (1..31)read-writecurrent
nonRecFromHours
OBJECT-TYPE
The starting hour of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.4Integer32 (0..23)read-writecurrent
nonRecFromMinutes
OBJECT-TYPE
The starting minute of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.5Integer32 (0..59)read-writecurrent
nonRecurringTo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.1.9
nonRecToYear
OBJECT-TYPE
The ending year of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.1Integer32 (2000..2037)read-writecurrent
nonRecToMonth
OBJECT-TYPE
The ending month of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.2Integer32 (1..12)read-writecurrent
nonRecToDay
OBJECT-TYPE
The ending day of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.3Integer32 (1..31)read-writecurrent
nonRecToHours
OBJECT-TYPE
The ending hour of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.4Integer32 (0..23)read-writecurrent
nonRecToMinutes
OBJECT-TYPE
The ending minute of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.5Integer32 (0..59)read-writecurrent
serverAddress
OBJECT-TYPE
IP address or hostname of time server
1.3.6.1.4.1.10297.202.7000.2.4.1.10DisplayStringread-writecurrent
serverPort
OBJECT-TYPE
Time server port number
1.3.6.1.4.1.10297.202.7000.2.4.1.11Integer32 (1..65535)read-writecurrent
systemTimeStatus
OBJECT-TYPE
If user set system time with SNMP, the value sould not apply to switch. They need to set active(1) to apply into switch
1.3.6.1.4.1.10297.202.7000.2.4.1.12INTEGER {active(1), notInService(2)}read-writecurrent
systemTimeInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.4.2
currentDateTime
OBJECT-TYPE
Current Date and Time on the device.
1.3.6.1.4.1.10297.202.7000.2.4.2.1DisplayStringread-onlycurrent
currentSNTP
OBJECT-TYPE
The status of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.2INTEGER {enable(1), disable(2)}read-onlycurrent
currentSNTPServerAddr
OBJECT-TYPE
The IP address or hostname of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.3DisplayStringread-onlycurrent
currentSNTPServerPort
OBJECT-TYPE
The port number of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.4Integer32 (1..65535)read-onlycurrent
currentTimeZone
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.4.2.5DisplayStringread-onlycurrent
currentDaylightSavingStatus
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.4.2.6DisplayStringread-onlycurrent
currentDaylightSavingOffset
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.4.2.7DisplayStringread-onlycurrent
currentDaylightSavingFrom
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.4.2.8DisplayStringread-onlycurrent
currentDaylightSavingTo
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.4.2.9DisplayStringread-onlycurrent
sfp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.5
sfpSerialInfoTable
OBJECT-TYPE
The table of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1not-accessiblecurrent
sfpSerialInfoEntry
OBJECT-TYPE
The entry of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1.1not-accessiblecurrent
sfpPortIndex
OBJECT-TYPE
The index of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1.1.1DisplayStringread-onlycurrent
sfpConnector
OBJECT-TYPE
The SFP connector
1.3.6.1.4.1.10297.202.7000.2.5.1.1.2DisplayStringread-onlycurrent
sfpSpeed
OBJECT-TYPE
The SFP speed
1.3.6.1.4.1.10297.202.7000.2.5.1.1.3DisplayStringread-onlycurrent
sfpVendorName
OBJECT-TYPE
The SFP vender name
1.3.6.1.4.1.10297.202.7000.2.5.1.1.4DisplayStringread-onlycurrent
sfpVendorPn
OBJECT-TYPE
The SFP vendor product number
1.3.6.1.4.1.10297.202.7000.2.5.1.1.6DisplayStringread-onlycurrent
spfVendorRev
OBJECT-TYPE
The SFP vender revision
1.3.6.1.4.1.10297.202.7000.2.5.1.1.7DisplayStringread-onlycurrent
sfpVendorSn
OBJECT-TYPE
The SFP vendor serial number
1.3.6.1.4.1.10297.202.7000.2.5.1.1.8DisplayStringread-onlycurrent
sfpDateCode
OBJECT-TYPE
The SFP data code
1.3.6.1.4.1.10297.202.7000.2.5.1.1.9DisplayStringread-onlycurrent
sfpDMIInfoTable
OBJECT-TYPE
The table of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2not-accessiblecurrent
sfpDMIInfoEntry
OBJECT-TYPE
The entry of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2.1not-accessiblecurrent
sfpDMIPortIndex
OBJECT-TYPE
The index of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2.1.1DisplayStringread-onlycurrent
sfpDMITemperature
OBJECT-TYPE
The SFP DMI temperature
1.3.6.1.4.1.10297.202.7000.2.5.2.1.2DisplayStringread-onlycurrent
sfpDMIVoltage
OBJECT-TYPE
The SFP DMI voltage
1.3.6.1.4.1.10297.202.7000.2.5.2.1.3DisplayStringread-onlycurrent
sfpDMITxBias
OBJECT-TYPE
The SFP DMI Tx bias
1.3.6.1.4.1.10297.202.7000.2.5.2.1.4DisplayStringread-onlycurrent
sfpDMITxPower
OBJECT-TYPE
The SFP DMI Tx power
1.3.6.1.4.1.10297.202.7000.2.5.2.1.5DisplayStringread-onlycurrent
sfpDMIRxPower
OBJECT-TYPE
The SFP DMI Rx power
1.3.6.1.4.1.10297.202.7000.2.5.2.1.6DisplayStringread-onlycurrent
ddmDiagnosticAlarm
OBJECT-TYPE
The DDM diagnostic alarm setting
1.3.6.1.4.1.10297.202.7000.2.5.3INTEGER {disabled(1), syslog(2), email(3), snmp(4)}read-writecurrent
sfpDMIAlarmInfoTable
OBJECT-TYPE
The table of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4not-accessiblecurrent
sfpDMIAlarmInfoEntry
OBJECT-TYPE
The entry of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4.1not-accessiblecurrent
sfpDMIAlarmPortIndex
OBJECT-TYPE
The index of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4.1.1DisplayStringread-onlycurrent
sfpDMITempHighAlarmState
OBJECT-TYPE
The state of SFP DMI temperature high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITempHighAlarmValue
OBJECT-TYPE
The value of SFP DMI temperature high alarm. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.3DisplayStringread-writecurrent
sfpDMITempHighWarnState
OBJECT-TYPE
The state of SFP DMI temperature high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITempHighWarnValue
OBJECT-TYPE
The value of SFP DMI temperature high warning. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.5DisplayStringread-writecurrent
sfpDMITempLowAlarmState
OBJECT-TYPE
The state of SFP DMI temperature low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITempLowAlarmValue
OBJECT-TYPE
The value of SFP DMI temperature low alarm. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.7DisplayStringread-writecurrent
sfpDMITempLowWarnState
OBJECT-TYPE
The state of SFP DMI temperature low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITempLowWarnValue
OBJECT-TYPE
The value of SFP DMI temperature low warning. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.9DisplayStringread-writecurrent
sfpDMIVoltageHighAlarmState
OBJECT-TYPE
The state of SFP DMI voltage high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.10INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIVoltageHighAlarmValue
OBJECT-TYPE
The value of SFP DMI voltage high alarm. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.11DisplayStringread-writecurrent
sfpDMIVoltageHighWarnState
OBJECT-TYPE
The state of SFP DMI voltage high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIVoltageHighWarnValue
OBJECT-TYPE
The value of SFP DMI voltage high warning. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.13DisplayStringread-writecurrent
sfpDMIVoltageLowAlarmState
OBJECT-TYPE
The state of SFP DMI voltage low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIVoltageLowAlarmValue
OBJECT-TYPE
The value of SFP DMI voltage low alarm. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.15DisplayStringread-writecurrent
sfpDMIVoltageLowWarnState
OBJECT-TYPE
The state of SFP DMI voltage low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.16INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIVoltageLowWarnValue
OBJECT-TYPE
The value of SFP DMI voltage low warning. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.17DisplayStringread-writecurrent
sfpDMITxBasisHighAlarmState
OBJECT-TYPE
The state of SFP DMI TX Basis high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxBasisHighAlarmValue
OBJECT-TYPE
The value of SFP DMI TX Basis high alarm. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.19DisplayStringread-writecurrent
sfpDMITxBasisHighWarnState
OBJECT-TYPE
The state of SFP DMI TX Basis high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.20INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxBasisHighWarnValue
OBJECT-TYPE
The value of SFP DMI TX Basis high warning. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.21DisplayStringread-writecurrent
sfpDMITxBasisLowAlarmState
OBJECT-TYPE
The state of SFP DMI TX Basis low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.22INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxBasisLowAlarmValue
OBJECT-TYPE
The value of SFP DMI TX Basis low alarm. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.23DisplayStringread-writecurrent
sfpDMITxBasisLowWarnState
OBJECT-TYPE
The state of SFP DMI TX Basis low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.24INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxBasisLowWarnValue
OBJECT-TYPE
The value of SFP DMI TX Basis low warning. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.25DisplayStringread-writecurrent
sfpDMITxPowerHighAlarmState
OBJECT-TYPE
The state of SFP DMI TX power high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.26INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxPowerHighAlarmValue
OBJECT-TYPE
The value of SFP DMI TX power high alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.27DisplayStringread-writecurrent
sfpDMITxPowerHighWarnState
OBJECT-TYPE
The state of SFP DMI TX power high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.28INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxPowerHighWarnValue
OBJECT-TYPE
The value of SFP DMI TX power high warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.29DisplayStringread-writecurrent
sfpDMITxPowerLowAlarmState
OBJECT-TYPE
The state of SFP DMI TX power low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.30INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxPowerLowAlarmValue
OBJECT-TYPE
The value of SFP DMI TX power low alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.31DisplayStringread-writecurrent
sfpDMITxPowerLowWarnState
OBJECT-TYPE
The state of SFP DMI TX power low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.32INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMITxPowerLowWarnValue
OBJECT-TYPE
The value of SFP DMI TX power low warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.33DisplayStringread-writecurrent
sfpDMIRxPowerHighAlarmState
OBJECT-TYPE
The state of SFP DMI RX power high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.34INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIRxPowerHighAlarmValue
OBJECT-TYPE
The value of SFP DMI RX power high alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.35DisplayStringread-writecurrent
sfpDMIRxPowerHighWarnState
OBJECT-TYPE
The state of SFP DMI RX power high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.36INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIRxPowerHighWarnValue
OBJECT-TYPE
The value of SFP DMI RX power high warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.37DisplayStringread-writecurrent
sfpDMIRxPowerLowAlarmState
OBJECT-TYPE
The state of SFP DMI RX power low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.38INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIRxPowerLowAlarmValue
OBJECT-TYPE
The value of SFP DMI RX power low alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.39DisplayStringread-writecurrent
sfpDMIRxPowerLowWarnState
OBJECT-TYPE
The state of SFP DMI RX power low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.40INTEGER {enabled(1), disabled(2)}read-writecurrent
sfpDMIRxPowerLowWarnValue
OBJECT-TYPE
The value of SFP DMI RX power low warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.41DisplayStringread-writecurrent
dhcpClientOpt82
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.6
dhcpClientOpt82Status
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.1INTEGER {enabled(1), disabled(2)}read-writecurrent
dhcpClientOpt82CircuitIDFormat
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.2INTEGER {string(1), hex(2), userDefined(3)}read-writecurrent
dhcpClientOpt82CircuitIDString
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.3DisplayStringread-writecurrent
dhcpClientOpt82CircuitIDHex
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.4DisplayStringread-writecurrent
dhcpClientOpt82CircuitIDUserDefine
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.5DisplayStringread-writecurrent
dhcpClientOpt82RemoteIDFormat
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.6INTEGER {string(1), hex(2), userDefined(3)}read-writecurrent
dhcpClientOpt82RemoteIDString
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.7DisplayStringread-writecurrent
dhcpClientOpt82RemoteIDHex
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.8DisplayStringread-writecurrent
dhcpClientOpt82RemoteIDUserDefine
OBJECT-TYPE
1.3.6.1.4.1.10297.202.7000.2.6.9DisplayStringread-writecurrent
networkPort
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.2.7
httpNetworkPort
OBJECT-TYPE
The network port of http.
1.3.6.1.4.1.10297.202.7000.2.7.1Integer32 (1..65535)read-writecurrent
httpsNetworkPort
OBJECT-TYPE
The network port of https.
1.3.6.1.4.1.10297.202.7000.2.7.2Integer32 (1..65535)read-writecurrent
telnetNetworkPort
OBJECT-TYPE
The network port of telnet.
1.3.6.1.4.1.10297.202.7000.2.7.3Integer32 (1..65535)read-writecurrent
sshNetworkPort
OBJECT-TYPE
The network port of ssh.
1.3.6.1.4.1.10297.202.7000.2.7.4Integer32 (1..65535)read-writecurrent
l2switching
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3
portSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.1
portSettingTable
OBJECT-TYPE
The table of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1not-accessiblecurrent
portSettingEntry
OBJECT-TYPE
The entry of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1.1not-accessiblecurrent
portSettingIndex
OBJECT-TYPE
The index of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1.1.1Integer32 (1..65535)read-onlycurrent
description
OBJECT-TYPE
Port description
1.3.6.1.4.1.10297.202.7000.3.1.1.1.2DisplayStringread-writecurrent
enableState
OBJECT-TYPE
Port admin state
1.3.6.1.4.1.10297.202.7000.3.1.1.1.3INTEGER {enable(1), disable(2)}read-writecurrent
linkStatus
OBJECT-TYPE
Port link status
1.3.6.1.4.1.10297.202.7000.3.1.1.1.4INTEGER {up(1), down(2)}read-onlycurrent
speed
OBJECT-TYPE
Port speed capabilities
1.3.6.1.4.1.10297.202.7000.3.1.1.1.5INTEGER {auto(1), auto-10M(2), auto-100M(3), auto-1000M(4), auto-10M-100M(5), fixed-10M(6), fixed-100M(7), fixed-1000M(8)}read-writecurrent
duplex
OBJECT-TYPE
Port duplex capabilities
1.3.6.1.4.1.10297.202.7000.3.1.1.1.6INTEGER {auto(1), half(2), full(3)}read-writecurrent
flowControlConfig
OBJECT-TYPE
Port flow control setting
1.3.6.1.4.1.10297.202.7000.3.1.1.1.7INTEGER {enable(1), disable(2)}read-writecurrent
flowControlStatus
OBJECT-TYPE
Port flow control status
1.3.6.1.4.1.10297.202.7000.3.1.1.1.8INTEGER {enable(1), disable(2)}read-onlycurrent
mirror
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.2
mirrorTable
OBJECT-TYPE
The table of mirror funciton
1.3.6.1.4.1.10297.202.7000.3.2.1not-accessiblecurrent
mirrorEntry
OBJECT-TYPE
The entry of mirror funciton
1.3.6.1.4.1.10297.202.7000.3.2.1.1not-accessiblecurrent
sessionId
OBJECT-TYPE
Mirror session ID
1.3.6.1.4.1.10297.202.7000.3.2.1.1.1Integer32 (1..4)read-onlycurrent
monitorSessionState
OBJECT-TYPE
Mirror session state
1.3.6.1.4.1.10297.202.7000.3.2.1.1.2INTEGER {port-based(1), disable(2)}read-writecurrent
destinationPort
OBJECT-TYPE
Mirror session destination port
1.3.6.1.4.1.10297.202.7000.3.2.1.1.3Integer32read-writecurrent
ingressState
OBJECT-TYPE
Destination port ingress state
1.3.6.1.4.1.10297.202.7000.3.2.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
sourceTxPort
OBJECT-TYPE
Mirror session source tx ports only select portbased-enabled state.
1.3.6.1.4.1.10297.202.7000.3.2.1.1.5Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
sourceRxPort
OBJECT-TYPE
Mirror session source rx ports only select portbased-enabled state
1.3.6.1.4.1.10297.202.7000.3.2.1.1.6Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
lag
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.3
loadBalanceAlgorithm
OBJECT-TYPE
LAG load balance distribution algorithm. MAC Address: Based on source and destination MAC address for all packets IP/MAC Address: Based on source and destination IP addresses for IP packet, and source and destination MAC address for non-IP packets. Source Port: Based on Source Port for all packets.
1.3.6.1.4.1.10297.202.7000.3.3.1INTEGER {mac-address(1), ip-mac-address(2), source-port(3)}read-writecurrent
lagManagementTable
OBJECT-TYPE
The table of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2not-accessiblecurrent
lagManagementEntry
OBJECT-TYPE
The entry of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2.1not-accessiblecurrent
lagIndex
OBJECT-TYPE
The index of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2.1.1Integer32 (1..65535)read-onlycurrent
lagName
OBJECT-TYPE
LAG port name
1.3.6.1.4.1.10297.202.7000.3.3.2.1.2DisplayStringread-writecurrent
lagType
OBJECT-TYPE
the type of the LAG Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candidate ports. LACP determines which candidate ports are active member ports.
1.3.6.1.4.1.10297.202.7000.3.3.2.1.3INTEGER {static(1), lacp(2), none(3)}read-writecurrent
lagPorts
OBJECT-TYPE
the trunk member ports in this field
1.3.6.1.4.1.10297.202.7000.3.3.2.1.4Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
lagLinkState
OBJECT-TYPE
LAG port link status
1.3.6.1.4.1.10297.202.7000.3.3.2.1.5INTEGER {up(1), down(2), not-present(3)}read-onlycurrent
lagActiveMember
OBJECT-TYPE
Active member ports of the LAG
1.3.6.1.4.1.10297.202.7000.3.3.2.1.6DisplayStringread-onlycurrent
lagStandbyMember
OBJECT-TYPE
Inactive or candidate member ports of the LAG
1.3.6.1.4.1.10297.202.7000.3.3.2.1.7DisplayStringread-onlycurrent
lagPortTable
OBJECT-TYPE
The table of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3not-accessiblecurrent
lagPortEntry
OBJECT-TYPE
The entry of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1not-accessiblecurrent
lagPortIndex
OBJECT-TYPE
The index of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1.1Integer32 (1..65535)read-onlycurrent
lagPortDescription
OBJECT-TYPE
The description of the LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1.2DisplayStringread-onlycurrent
lagPortType
OBJECT-TYPE
Member port media type
1.3.6.1.4.1.10297.202.7000.3.3.3.1.3DisplayStringread-onlycurrent
lagPortEnableState
OBJECT-TYPE
LAG port admin state
1.3.6.1.4.1.10297.202.7000.3.3.3.1.4INTEGER {enable(1), disable(2)}read-writecurrent
lagPortLinkStatus
OBJECT-TYPE
LAG port link status
1.3.6.1.4.1.10297.202.7000.3.3.3.1.5INTEGER {up(1), down(2)}read-onlycurrent
lagPortSpeed
OBJECT-TYPE
Current LAG port speed
1.3.6.1.4.1.10297.202.7000.3.3.3.1.6INTEGER {auto(1), auto-10M(2), auto-100M(3), auto-1000M(4), auto-10M-100M(5), fixed-10M(6), fixed-100M(7), fixed-1000M(8)}read-writecurrent
lagPortDuplex
OBJECT-TYPE
Current LAG port duplex
1.3.6.1.4.1.10297.202.7000.3.3.3.1.7INTEGER {auto(1), half(2), full(3)}read-onlycurrent
lagPortFlowCtrlConfig
OBJECT-TYPE
LAG port flow control configuration
1.3.6.1.4.1.10297.202.7000.3.3.3.1.8INTEGER {enable(1), disable(2)}read-writecurrent
lagPortFlowCtrlStatus
OBJECT-TYPE
Current LAG port flow control state
1.3.6.1.4.1.10297.202.7000.3.3.3.1.9INTEGER {enable(1), disable(2)}read-onlycurrent
lacpSystemPriority
OBJECT-TYPE
Configure the system priority of LACP
1.3.6.1.4.1.10297.202.7000.3.3.4Integer32 (1..65535)read-writecurrent
lacpPortTable
OBJECT-TYPE
The table of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5not-accessiblecurrent
lacpPortEntry
OBJECT-TYPE
The entry of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5.1not-accessiblecurrent
lacpPortIndex
OBJECT-TYPE
The index of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.1Integer32 (1..65535)read-onlycurrent
lacpPriority
OBJECT-TYPE
LACP priority of the port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.2Integer32 (1..65535)read-writecurrent
lacpTimeout
OBJECT-TYPE
The periodic transmissions of LACP PDUs Long: Transmit LACP PDU with slow periodic (30s). Short: Transmit LACPP DU with fast periodic (1s).
1.3.6.1.4.1.10297.202.7000.3.3.5.1.3INTEGER {long(1), short(2)}read-writecurrent
lacpPortMode
OBJECT-TYPE
LACP mode of the port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.4INTEGER {active(1), passive(2)}read-writecurrent
vlan
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.4
vlanTable
OBJECT-TYPE
The table of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1not-accessiblecurrent
vlanEntry
OBJECT-TYPE
The entry of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1.1not-accessiblecurrent
vlanIndex
OBJECT-TYPE
The index of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1.1.1Integer32 (1..4094)read-writecurrent
vlanId
OBJECT-TYPE
The VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.1.1.2Integer32 (1..4094)read-writecurrent
vlanNamePrefix
OBJECT-TYPE
The prefix string of the VLAN name
1.3.6.1.4.1.10297.202.7000.3.4.1.1.3DisplayStringread-writecurrent
vlanType
OBJECT-TYPE
The VLAN type
1.3.6.1.4.1.10297.202.7000.3.4.1.1.4INTEGER {default(1), static(2), dyanmic(3)}read-onlycurrent
vlanRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.4.1.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
vlanInterfaceTable
OBJECT-TYPE
The table of the VLN inetrface
1.3.6.1.4.1.10297.202.7000.3.4.2not-accessiblecurrent
vlanInterfaceEntry
OBJECT-TYPE
The entry of the VLN inetrface
1.3.6.1.4.1.10297.202.7000.3.4.2.1not-accessiblecurrent
vlanPortIndex
OBJECT-TYPE
The port index of the VLAN interface
1.3.6.1.4.1.10297.202.7000.3.4.2.1.1Integer32 (1..65535)read-onlycurrent
vlanInterfaceVlanMode
OBJECT-TYPE
VLAN mode for the interface. Hybrid: support all functions as defined in IEEE 802.1Q Access: Accepts only untagged frames and join an untagged VLAN Trunk: An ubtagged member of one VLAN at most, and is a tagged member of zero or more VLANs. Tunnel: Port-based Q-in-Q mode
1.3.6.1.4.1.10297.202.7000.3.4.2.1.2INTEGER {hybrid(1), access(2), trunk(3), tunnel(4)}read-onlycurrent
vlanPvid
OBJECT-TYPE
The port-based VLAN ID, It only available with Hybrid and Trunk mode.
1.3.6.1.4.1.10297.202.7000.3.4.2.1.3Integer32 (1..4094)read-writecurrent
vlanAcceptedType
OBJECT-TYPE
the acceptable-frame-type of the specified interfaces. It is only available with Hybrid mode.
1.3.6.1.4.1.10297.202.7000.3.4.2.1.4INTEGER {all(1), tag-only(2), untag-only(3)}read-writecurrent
vlanIngressFiltering
OBJECT-TYPE
the status of ingress filtering. It is only available with Hybrid mode.
1.3.6.1.4.1.10297.202.7000.3.4.2.1.5INTEGER {enable(1), disbale(2)}read-writecurrent
portToVlanTable
OBJECT-TYPE
The table of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3not-accessiblecurrent
portToVlanEntry
OBJECT-TYPE
The entry of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1not-accessiblecurrent
portToVlanVlanIndex
OBJECT-TYPE
The index of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1.1Integer32 (1..4094)read-onlycurrent
portToVlanPortIndex
OBJECT-TYPE
The port index of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1.2Integer32 (1..65535)read-onlycurrent
portToVlanVlanId
OBJECT-TYPE
VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.3.1.3Integer32read-onlycurrent
portToVlanInterfaceVlanMode
OBJECT-TYPE
Display the interface VLAN mode of this port
1.3.6.1.4.1.10297.202.7000.3.4.3.1.4INTEGER {hybrid(1), access(2), trunk(3), tunnel(4)}read-onlycurrent
portToVlanMembership
OBJECT-TYPE
the membership for this port with the specified VLAN ID. Forbidden: Specify the port is forbidden in the VLAN. Excluded: Specify the port is excluded in the VLAN. Tagged: Specify the port is tagged in the VLAN. Untagged: Specify the port is untagged in the VLAN.
1.3.6.1.4.1.10297.202.7000.3.4.3.1.5INTEGER {forbidden(1), exclued(2), tagged(3), untagged(4)}read-writecurrent
portToVlanPvid
OBJECT-TYPE
the VLAN ID to be the port-based VLAN ID for this port.
1.3.6.1.4.1.10297.202.7000.3.4.3.1.6INTEGER {enable(1), disable(2)}read-onlycurrent
portVlanTable
OBJECT-TYPE
The table of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4not-accessiblecurrent
portVlanEntry
OBJECT-TYPE
The entry of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4.1not-accessiblecurrent
portVlanPortIndex
OBJECT-TYPE
The port index of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4.1.1Integer32 (1..65535)read-onlycurrent
portVlanPortMode
OBJECT-TYPE
the interface VLAN mode of this port
1.3.6.1.4.1.10297.202.7000.3.4.4.1.2INTEGER {hybrid(1), access(2), trunk(3), tunnel(4)}read-onlycurrent
portVlanAdminVlans
OBJECT-TYPE
the administrative VLAN list of this port
1.3.6.1.4.1.10297.202.7000.3.4.4.1.3DisplayStringread-onlycurrent
portVlanOperVlans
OBJECT-TYPE
The operational VLAN list of this port
1.3.6.1.4.1.10297.202.7000.3.4.4.1.4DisplayStringread-onlycurrent
voiceVlan
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.4.5
voiceVlanState
OBJECT-TYPE
Voice VLAN state
1.3.6.1.4.1.10297.202.7000.3.4.5.1INTEGER {enable(1), disable(2)}read-writecurrent
voiceVlanId
OBJECT-TYPE
Voice VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.5.2Integer32 (1..4094)read-writecurrent
voiceVlanRemarkCos_8021p
OBJECT-TYPE
a value of vpt that will be advertised by LLDP-MED
1.3.6.1.4.1.10297.202.7000.3.4.5.3Integer32 (0..7)read-writecurrent
voiceVlanRemark1q
OBJECT-TYPE
1p remark state
1.3.6.1.4.1.10297.202.7000.3.4.5.4INTEGER {enable(1), disable(2)}read-writecurrent
voiceVlanAgingTime
OBJECT-TYPE
value of aging time
1.3.6.1.4.1.10297.202.7000.3.4.5.5Integer32 (30..65535)read-writecurrent
telephonyOUITable
OBJECT-TYPE
The table of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6not-accessiblecurrent
telephonyOUIEntry
OBJECT-TYPE
The entry of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1not-accessiblecurrent
telephonyOUIIndex
OBJECT-TYPE
The index of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.1Integer32 (1..16)read-onlycurrent
telephonyOUIAddress
OBJECT-TYPE
oui address
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.2DisplayStringread-writecurrent
telephonyOUIDescription
OBJECT-TYPE
description of the specified MAC address to the voice VLAN OUI table
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.3DisplayStringread-writecurrent
telephonyOUIRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
telephonyOUIPortTable
OBJECT-TYPE
The table of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7not-accessiblecurrent
telephonyOUIPortEntry
OBJECT-TYPE
The entry of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1not-accessiblecurrent
telephonyOUIPortIndex
OBJECT-TYPE
The port index of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.1Integer32 (1..65535)read-onlycurrent
telephonyOUIState
OBJECT-TYPE
Ingress/Egress type value
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.2INTEGER {enable(1), disable(2)}read-writecurrent
telephonyOUICosMode
OBJECT-TYPE
port cos mode Src: QoS attributes are applied to packets with OUIs in the source MAC address. All: QoS attributes are applied to packets that are classified to the Voice VLAN
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.3INTEGER {all(1), src(2)}read-writecurrent
interfaceVlanTable
OBJECT-TYPE
The table of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6not-accessiblecurrent
interfaceVlanEntry
OBJECT-TYPE
The entry of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1not-accessiblecurrent
interfaceVlanIndex
OBJECT-TYPE
The index of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1.1Integer32 (1..4094)read-writecurrent
interfaceVlanId
OBJECT-TYPE
The interface VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.6.1.2Integer32 (1..4094)read-writecurrent
interfaceVlanName
OBJECT-TYPE
The name of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1.3DisplayStringread-onlycurrent
interfaceVlanRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.4.6.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
eee
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.5
eeePortTable
OBJECT-TYPE
The table of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1not-accessiblecurrent
eeePortEntry
OBJECT-TYPE
The entry of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1.1not-accessiblecurrent
eeePortIndex
OBJECT-TYPE
The port index of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1.1.1Integer32 (1..65535)read-onlycurrent
eeeState
OBJECT-TYPE
Port EEE function.
1.3.6.1.4.1.10297.202.7000.3.5.1.1.2INTEGER {enable(1), disable(2)}read-writecurrent
multicast
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.6
unknownMulticastAction
OBJECT-TYPE
the unknown multicast action Drop: drop the unknown multicast data. Flood: flood the unknown multicast data. Router port: forward the unknown multicast data to router port.
1.3.6.1.4.1.10297.202.7000.3.6.1INTEGER {drop(1), flood(2), routerPort(3)}read-writecurrent
forwardMethod
OBJECT-TYPE
the multicast forward method. MAC: forward method dmac+vid.
1.3.6.1.4.1.10297.202.7000.3.6.2INTEGER {mac(1)}read-onlycurrent
igmpSnooping
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.6.3
igmpSnoopingState
OBJECT-TYPE
the enabling status of IGMP functionality
1.3.6.1.4.1.10297.202.7000.3.6.3.1INTEGER {enable(1), disabled(2)}read-writecurrent
igmpSnoopingVersion
OBJECT-TYPE
the igmp snooping version v2: Only support process igmp v2 packet. v3: Support v3 basic and v2.
1.3.6.1.4.1.10297.202.7000.3.6.3.2INTEGER {v2(1), v3(2)}read-writecurrent
igmpSnoopingReportSuppression
OBJECT-TYPE
the enabling status of IGMP v2 report suppression
1.3.6.1.4.1.10297.202.7000.3.6.3.3INTEGER {enable(1), disabled(2)}read-writecurrent
igmpSnoopingTable
OBJECT-TYPE
The table of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4not-accessiblecurrent
igmpSnoopingEntry
OBJECT-TYPE
The entry of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1not-accessiblecurrent
igmpSnoopingIndex
OBJECT-TYPE
The index of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.1Integer32 (1..4094)read-onlycurrent
igmpSnoopingVlanId
OBJECT-TYPE
The IGMP entry VLAN ID
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.2Integer32 (1..4904)read-onlycurrent
igmpSnoopStatus
OBJECT-TYPE
The enable status of IGMP VLAN functionality
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.3INTEGER {enable(1), disable(2)}read-writecurrent
routerPortsAutoLearn
OBJECT-TYPE
The enable statue of IGMP router port learning.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.4INTEGER {enable(1), disable(2)}read-writecurrent
queryRobustness
OBJECT-TYPE
The Robusstness Variable allows tuning for the expected packet loss on a subnet
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.5Integer32 (1..7)read-writecurrent
queryInterval
OBJECT-TYPE
The interval of querier send general query
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.6Integer32 (30..18000)read-writecurrent
queryMaxResponseInterval
OBJECT-TYPE
In Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.7Integer32 (5..20)read-writecurrent
lastMemberQueryCounter
OBJECT-TYPE
The count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.8Integer32 (1..7)read-writecurrent
lastMemberQueryInterval
OBJECT-TYPE
The interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.9Integer32 (1..25)read-writecurrent
immediateLeave
OBJECT-TYPE
Leave the group when receive IGMP Leave message.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.10INTEGER {enable(1), disable(2)}read-writecurrent
operQueryRobustness
OBJECT-TYPE
The operation query robustness.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.11Integer32read-onlycurrent
operQueryInterval
OBJECT-TYPE
The operation query interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.12Integer32read-onlycurrent
operQueryMaxResponseInterval
OBJECT-TYPE
The operating query max response interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.13Integer32read-onlycurrent
operLastMemberQueryCounter
OBJECT-TYPE
The operating last member query counter.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.14Integer32read-onlycurrent
operLastMemberQueryInterval
OBJECT-TYPE
The operation last member query interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.15Integer32read-onlycurrent
igmpQuerierTable
OBJECT-TYPE
The table of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5not-accessiblecurrent
igmpQuerierEntry
OBJECT-TYPE
The entry of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1not-accessiblecurrent
igmpQuerierVlanId
OBJECT-TYPE
The VLAN ID of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.1Integer32 (1..4094)read-onlycurrent
igmpQuerierState
OBJECT-TYPE
The enabling status of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.2INTEGER {enable(1), disable(2)}read-writecurrent
igmpQuerierStatus
OBJECT-TYPE
The enabling status of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.3INTEGER {querier(1), nonQuerier(2)}read-onlycurrent
igmpQuerierVersion
OBJECT-TYPE
The query version of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.4INTEGER {v2(1), v3(2)}read-writecurrent
igmpQuerierIP
OBJECT-TYPE
The query IP address of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.5DisplayStringread-onlycurrent
igmpStaticGroupTable
OBJECT-TYPE
The table of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6not-accessiblecurrent
igmpStaticGroupEntry
OBJECT-TYPE
The entry of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1not-accessiblecurrent
igmpStaticGroupIndex
OBJECT-TYPE
The index of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.1Integer32 (1..256)read-onlycurrent
igmpStaticGroupVlanId
OBJECT-TYPE
The VLAN ID of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.2Integer32read-writecurrent
igmpStaticGroupIPaddress
OBJECT-TYPE
The IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.3IpAddressread-writecurrent
igmpStaticGroupMemberPorts
OBJECT-TYPE
The member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.4Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
igmpStaticGroupRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
igmpGroupTable
OBJECT-TYPE
The table of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7not-accessiblecurrent
igmpGroupEntry
OBJECT-TYPE
The entry of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1not-accessiblecurrent
igmpGroupVlanId
OBJECT-TYPE
The VLAN ID of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.1Integer32 (1..4094)read-onlycurrent
igmpGroupIPaddress
OBJECT-TYPE
The group IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.2IpAddressread-onlycurrent
igmpGroupMemberPorts
OBJECT-TYPE
The member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.3DisplayStringread-onlycurrent
igmpGroupType
OBJECT-TYPE
The type of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.4INTEGER {static(1), dynamic(2)}read-onlycurrent
igmpGroupLife
OBJECT-TYPE
The life time of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.5Integer32read-onlycurrent
igmpRouterTable
OBJECT-TYPE
The table of IGMP router
1.3.6.1.4.1.10297.202.7000.3.6.3.8not-accessiblecurrent
igmpRouterEntry
OBJECT-TYPE
The entry of IGMP router
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1not-accessiblecurrent
igmpRouterVlanId
OBJECT-TYPE
The VLAN ID of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.1Integer32 (1..4094)read-onlycurrent
igmpRouterPort
OBJECT-TYPE
The port of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.2DisplayStringread-onlycurrent
igmpRouterExpireTime
OBJECT-TYPE
The expire time of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.3Integer32read-onlycurrent
mldSnooping
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.6.4
mldSnoopingState
OBJECT-TYPE
the enabling status of MLD functionality
1.3.6.1.4.1.10297.202.7000.3.6.4.1INTEGER {enable(1), disabled(2)}read-writecurrent
mldSnoopingVersion
OBJECT-TYPE
the MLD snooping version
1.3.6.1.4.1.10297.202.7000.3.6.4.2INTEGER {v1(1), v2(2)}read-writecurrent
mldSnoopingReportSuppression
OBJECT-TYPE
the enabling status of MLD report suppression
1.3.6.1.4.1.10297.202.7000.3.6.4.3INTEGER {enable(1), disabled(2)}read-writecurrent
mldSnoopingTable
OBJECT-TYPE
The table of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4not-accessiblecurrent
mldSnoopingEntry
OBJECT-TYPE
The entry of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1not-accessiblecurrent
mldSnoopingIndex
OBJECT-TYPE
The index of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.1Integer32 (1..4094)read-onlycurrent
mldSnoopingVlanId
OBJECT-TYPE
The MLD entry VLAN ID
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.2Integer32 (1..4904)read-onlycurrent
mldSnoopStatus
OBJECT-TYPE
The enable status of MLD VLAN functionality
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.3INTEGER {enable(1), disable(2)}read-writecurrent
mldSnoopRouterPortsAutoLearn
OBJECT-TYPE
The enable statue of MLD router port learning.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.4INTEGER {enable(1), disable(2)}read-writecurrent
mldSnoopQueryRobustness
OBJECT-TYPE
The Robusstness Variable allows tuning for the expected packet loss on a subnet
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.5Integer32 (1..7)read-writecurrent
mldSnoopQueryInterval
OBJECT-TYPE
The interval of querier send general query
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.6Integer32 (30..18000)read-writecurrent
mldSnoopQueryMaxResponseInterval
OBJECT-TYPE
In Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.7Integer32 (5..20)read-writecurrent
mldSnoopLastMemberQueryCounter
OBJECT-TYPE
The count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.8Integer32 (1..7)read-writecurrent
mldSnoopLastMemberQueryInterval
OBJECT-TYPE
The interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.9Integer32 (1..25)read-writecurrent
mldSnoopImmediateLeave
OBJECT-TYPE
Leave the group when receive MLD Leave message.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.10INTEGER {enable(1), disable(2)}read-writecurrent
operMldSnoopQueryRobustness
OBJECT-TYPE
The operation MLD query robustness.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.11Integer32read-onlycurrent
operMldSnoopQueryInterval
OBJECT-TYPE
The operation MLD query interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.12Integer32read-onlycurrent
operMldSnoopQueryMaxResponseInterval
OBJECT-TYPE
The operating MLD query max response interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.13Integer32read-onlycurrent
operMldSnoopLastMemberQueryCounter
OBJECT-TYPE
The operating MLD last member query counter.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.14Integer32read-onlycurrent
operMldSnoopLastMemberQueryInterval
OBJECT-TYPE
The operation MLD last member query interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.15Integer32read-onlycurrent
mldQuerierTable
OBJECT-TYPE
The table of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5not-accessiblecurrent
mldQuerierEntry
OBJECT-TYPE
The entry of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1not-accessiblecurrent
mldQuerierVlanId
OBJECT-TYPE
The VLAN ID of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.1Integer32 (1..4094)read-onlycurrent
mldQuerierState
OBJECT-TYPE
The enabling status of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.2INTEGER {enable(1), disable(2)}read-writecurrent
mldQuerierStatus
OBJECT-TYPE
The querier status of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.3INTEGER {querier(1), nonQuerier(2)}read-onlycurrent
mldQuerierVersion
OBJECT-TYPE
The query version of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.4INTEGER {v1(1), v2(2)}read-writecurrent
mldQuerierIP
OBJECT-TYPE
The query IP address of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.5DisplayStringread-onlycurrent
mldStaticGroupTable
OBJECT-TYPE
The table of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6not-accessiblecurrent
mldStaticGroupEntry
OBJECT-TYPE
The entry of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1not-accessiblecurrent
mldStaticGroupIndex
OBJECT-TYPE
The index of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.1Integer32 (1..256)read-onlycurrent
mldStaticGroupVlanId
OBJECT-TYPE
The VLAN ID of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.2Integer32 (1..4094)read-writecurrent
mldStaticGroupIPaddress
OBJECT-TYPE
The IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.3DisplayStringread-writecurrent
mldStaticGroupMemberPorts
OBJECT-TYPE
The member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.4Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
mldStaticGroupRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
mldGroupTable
OBJECT-TYPE
The table of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7not-accessiblecurrent
mldGroupEntry
OBJECT-TYPE
The entry of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1not-accessiblecurrent
mldGroupVlanId
OBJECT-TYPE
The VLAN ID of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.1Integer32 (1..4094)read-onlycurrent
mldGroupIPaddress
OBJECT-TYPE
The group IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.2DisplayStringread-onlycurrent
mldGroupMemberPorts
OBJECT-TYPE
The member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.3DisplayStringread-onlycurrent
mldGroupType
OBJECT-TYPE
The type of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.4INTEGER {static(1), dynamic(2)}read-onlycurrent
mldGroupLife
OBJECT-TYPE
The life time of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.5Integer32read-onlycurrent
mldRouterTable
OBJECT-TYPE
The table of MLD router
1.3.6.1.4.1.10297.202.7000.3.6.4.8not-accessiblecurrent
mldRouterEntry
OBJECT-TYPE
The entry of MLD router
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1not-accessiblecurrent
mldRouterVlanId
OBJECT-TYPE
The VLAN ID of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.1Integer32 (1..4094)read-onlycurrent
mldRouterPort
OBJECT-TYPE
The port of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.2DisplayStringread-onlycurrent
mldRouterExpireTime
OBJECT-TYPE
The expire time of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.3Integer32read-onlycurrent
jamboFrame
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.7
jamboFramePktSize
OBJECT-TYPE
Jumbo frame size
1.3.6.1.4.1.10297.202.7000.3.7.1Integer32 (1518..9216)read-writecurrent
stp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8
stpEnable
OBJECT-TYPE
Specify the STP status to be enable/disable on the switch. Enable STP will block all switch port and SNMP set will timeout.
1.3.6.1.4.1.10297.202.7000.3.8.1INTEGER {enable(1), disable(2)}read-writecurrent
bpduForward
OBJECT-TYPE
The BPDU forwarding action when the global STP is disable
1.3.6.1.4.1.10297.202.7000.3.8.2INTEGER {flooding(1), filtering(2)}read-writecurrent
pathCostMethod
OBJECT-TYPE
The path cost method of STP
1.3.6.1.4.1.10297.202.7000.3.8.3INTEGER {short(1), long(2)}read-writecurrent
forceVersion
OBJECT-TYPE
The operating mode of STP STP-compatible: IEEE 802.1D STP operation RSTP-Operation: IEEE 802.1W operation
1.3.6.1.4.1.10297.202.7000.3.8.4INTEGER {stp-compatible(1), rstp-operation(2), mstp-operation(3)}read-writecurrent
stpPortTable
OBJECT-TYPE
The table of STP port
1.3.6.1.4.1.10297.202.7000.3.8.5not-accessiblecurrent
stpPortEntry
OBJECT-TYPE
The entry of STP port
1.3.6.1.4.1.10297.202.7000.3.8.5.1not-accessiblecurrent
stpPortIndex
OBJECT-TYPE
The port index of STP
1.3.6.1.4.1.10297.202.7000.3.8.5.1.1Integer32 (1..65535)read-onlycurrent
stpAdminEnable
OBJECT-TYPE
enable/disable the STP port state
1.3.6.1.4.1.10297.202.7000.3.8.5.1.2INTEGER {enable(1), disable(2)}read-writecurrent
stpPathCost
OBJECT-TYPE
the port is contribution, when it is the Root Port, to the Root Path Cost for the Bridge. (0 means 'Auto')
1.3.6.1.4.1.10297.202.7000.3.8.5.1.3Integer32read-writecurrent
stpEdgePort
OBJECT-TYPE
the edge port configuration: No: Force to false state (as link to a bridge). Yes: Force to true state (as link to a host).
1.3.6.1.4.1.10297.202.7000.3.8.5.1.4INTEGER {yes(1), no(2)}read-writecurrent
stpP2pMac
OBJECT-TYPE
the Point-to-Point port configuration:
1.3.6.1.4.1.10297.202.7000.3.8.5.1.5INTEGER {yes(1), no(2)}read-writecurrent
stpMigrate
OBJECT-TYPE
Force to try to use the new MST/RST BPDUs, and hence to test the hypothesis that all legacy systems that do not understand the new BPDU formats have been removed from the LAN segment on the port(s).
1.3.6.1.4.1.10297.202.7000.3.8.5.1.6INTEGER {enable(1), disable(2)}read-writecurrent
stpBridgeInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.6
stpBridgePriority
OBJECT-TYPE
the Bridge Priority in the CIST instance. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440
1.3.6.1.4.1.10297.202.7000.3.8.6.1Integer32read-writecurrent
stpBridgeForwardDelay
OBJECT-TYPE
the delay time an interface takes to converge from blocking state to forwarding state. Max Age <= 2*(Forward Delay Time - 1)
1.3.6.1.4.1.10297.202.7000.3.8.6.2Integer32 (4..30)read-writecurrent
stpBridgeMaxAge
OBJECT-TYPE
the time any switch should wait before trying to change the STP topology after unhearing Hello BPUD. Max Age <= 2*(Forward Delay Time - 1) Max Age >= 2*(Hello Time + 1)
1.3.6.1.4.1.10297.202.7000.3.8.6.3Integer32 (6..40)read-writecurrent
stpBridgeTxHoldCount
OBJECT-TYPE
the Transmit Hold Count used to limit BPDU transmission rate.
1.3.6.1.4.1.10297.202.7000.3.8.6.4Integer32 (1..10)read-writecurrent
stpBridgeHelloTime
OBJECT-TYPE
the interval between periodic transmissions of BPDU by Designated Ports. Max Age >= 2*(Hello Time + 1)
1.3.6.1.4.1.10297.202.7000.3.8.6.5Integer32 (1..10)read-writecurrent
stpBridgeStatus
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.7
bridgeIdentifier
OBJECT-TYPE
STP bridge identifier
1.3.6.1.4.1.10297.202.7000.3.8.7.1DisplayStringread-onlycurrent
definatedRootBridge
OBJECT-TYPE
STP destination root bridge ID
1.3.6.1.4.1.10297.202.7000.3.8.7.2DisplayStringread-onlycurrent
rootPathCost
OBJECT-TYPE
STP root path cost
1.3.6.1.4.1.10297.202.7000.3.8.7.3Integer32read-onlycurrent
designatedBridge
OBJECT-TYPE
STP designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.7.4DisplayStringread-onlycurrent
rootPort
OBJECT-TYPE
STP root port
1.3.6.1.4.1.10297.202.7000.3.8.7.5DisplayStringread-onlycurrent
lastTopologyChange
OBJECT-TYPE
STP last topology change
1.3.6.1.4.1.10297.202.7000.3.8.7.6INTEGERread-onlycurrent
stpPortStatusTable
OBJECT-TYPE
The table of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8not-accessiblecurrent
stpPortStatusEntry
OBJECT-TYPE
The entry of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1not-accessiblecurrent
stpPortStatusIndex
OBJECT-TYPE
The index of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1.1Integer32 (1..65535)read-onlycurrent
stpPortPriority
OBJECT-TYPE
The Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, 240
1.3.6.1.4.1.10297.202.7000.3.8.8.1.2Integer32read-writecurrent
stpPortPathCost
OBJECT-TYPE
Path Cost to the selected ports in the CIST instance. (0 means `Auto`)
1.3.6.1.4.1.10297.202.7000.3.8.8.1.3DisplayStringread-onlycurrent
stpPortDesignatedRootBridge
OBJECT-TYPE
The designated root bridge
1.3.6.1.4.1.10297.202.7000.3.8.8.1.4DisplayStringread-onlycurrent
stpPortRootPathCost
OBJECT-TYPE
The root path cost
1.3.6.1.4.1.10297.202.7000.3.8.8.1.5Integer32read-onlycurrent
stpPortDesignatedBridge
OBJECT-TYPE
The designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.8.1.6DisplayStringread-onlycurrent
stpPortEdgrPortConf
OBJECT-TYPE
The edge port configuration
1.3.6.1.4.1.10297.202.7000.3.8.8.1.7DisplayStringread-onlycurrent
stpPortP2PMacConf
OBJECT-TYPE
The point-to-point MAC configuration
1.3.6.1.4.1.10297.202.7000.3.8.8.1.8DisplayStringread-onlycurrent
stpPortRoles
OBJECT-TYPE
The port roles
1.3.6.1.4.1.10297.202.7000.3.8.8.1.9INTEGER {disabled(0), master(1), root(2), designated(3), alternate(4), backup(5)}read-onlycurrent
stpPortStatus
OBJECT-TYPE
The port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1.10INTEGER {disabled(0), discarding(1), learning(2), forwarding(3)}read-onlycurrent
stpStatisticTable
OBJECT-TYPE
The table of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9not-accessiblecurrent
stpStatisticEntry
OBJECT-TYPE
The entry of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9.1not-accessiblecurrent
stpStatisticPortIndex
OBJECT-TYPE
The port index of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9.1.1Integer32 (1..65535)read-onlycurrent
configurationBPDUsReceived
OBJECT-TYPE
The configuration BPDU received
1.3.6.1.4.1.10297.202.7000.3.8.9.1.2Integer32read-onlycurrent
tcnBPDUsReceived
OBJECT-TYPE
The TCN BPDU received
1.3.6.1.4.1.10297.202.7000.3.8.9.1.3Integer32read-onlycurrent
configurationBPDUsTransmitted
OBJECT-TYPE
The configuration BPDU transmitted
1.3.6.1.4.1.10297.202.7000.3.8.9.1.4Integer32read-onlycurrent
tcnBPDUsTransmitted
OBJECT-TYPE
The TCN BPDU transmitted
1.3.6.1.4.1.10297.202.7000.3.8.9.1.5Integer32read-onlycurrent
mstp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.10
mstConfigIdentification
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.10.1
mstConfigName
OBJECT-TYPE
The configuration name of MSTP
1.3.6.1.4.1.10297.202.7000.3.8.10.1.1DisplayStringread-writecurrent
mstRevisionLevel
OBJECT-TYPE
The revision level of MSTP
1.3.6.1.4.1.10297.202.7000.3.8.10.1.2Integer32 (0..65535)read-writecurrent
mstInstanceID
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.10.2
mstiIDSetting
OBJECT-TYPE
The MSTI ID of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.1Integer32 (0..15)read-writecurrent
mstiVlanListSetting
OBJECT-TYPE
The VLAN list of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.2DisplayStringread-writecurrent
mstiIDSettingMove
OBJECT-TYPE
The moving action of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.3INTEGER {nothing(1), move(2)}read-writecurrent
mstiIDInfoTable
OBJECT-TYPE
The table of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4not-accessiblecurrent
mstiIDInfoEntry
OBJECT-TYPE
The entry of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1not-accessiblecurrent
mstiIDIndex
OBJECT-TYPE
The MSTI ID of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.1Integer32 (0..15)read-onlycurrent
mstiVLANList
OBJECT-TYPE
The VLAN List of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.2DisplayStringread-onlycurrent
stpInstance
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.10.3
stpPriorityInfoTable
OBJECT-TYPE
The table of STP priority info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1not-accessiblecurrent
stpPriorityInfoEntry
OBJECT-TYPE
The entry of STP priority info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1not-accessiblecurrent
stpMstiIDIndex
OBJECT-TYPE
The MSTI ID of STP instance info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.1Integer32 (1..15)read-onlycurrent
stpPriorityValue
OBJECT-TYPE
The priority of STP instance info. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.2Integer32read-writecurrent
stpPriorityDefault
OBJECT-TYPE
Set the priority to default value.
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.3INTEGER {nothing(1), default(2)}read-writecurrent
mstInstanceInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.8.10.4
mstBridgeIdentifier
OBJECT-TYPE
STP bridge identifier in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.1DisplayStringread-onlycurrent
mstDesignatedRootBridge
OBJECT-TYPE
STP destination root bridge ID in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.2DisplayStringread-onlycurrent
mstRootPathCost
OBJECT-TYPE
STP root path cost in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.3Integer32read-onlycurrent
mstDesignatedBridge
OBJECT-TYPE
STP designated bridge in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.4DisplayStringread-onlycurrent
mstRootPort
OBJECT-TYPE
STP root port in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.5DisplayStringread-onlycurrent
mstLastTopologyChange
OBJECT-TYPE
STP last topology change in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.6INTEGERread-onlycurrent
mstStpPortStatusTable
OBJECT-TYPE
The table of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7not-accessiblecurrent
mstStpPortStatusEntry
OBJECT-TYPE
The entry of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1not-accessiblecurrent
mstStpPortStatusIndex
OBJECT-TYPE
The index of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.1Integer32 (1..65535)read-onlycurrent
mstStpPortPriority
OBJECT-TYPE
The Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, 240
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.2DisplayStringread-onlycurrent
mstStpPortPathCost
OBJECT-TYPE
Path Cost to the selected ports in the CIST instance. (0 means `Auto`)
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.3DisplayStringread-onlycurrent
mstStpPortDesignatedRootBridge
OBJECT-TYPE
The designated root bridge
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.4DisplayStringread-onlycurrent
mstStpPortRootPathCost
OBJECT-TYPE
The root path cost
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.5DisplayStringread-onlycurrent
mstStpPortDesignatedBridge
OBJECT-TYPE
The designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.6DisplayStringread-onlycurrent
mstStpPortEdgrPortConf
OBJECT-TYPE
The edge port configuration
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.7DisplayStringread-onlycurrent
mstStpPortP2PMacConf
OBJECT-TYPE
The point-to-point MAC configuration
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.8DisplayStringread-onlycurrent
mstStpPortRoles
OBJECT-TYPE
The port roles
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.9DisplayStringread-onlycurrent
mstStpPortStatus
OBJECT-TYPE
The port status
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.10DisplayStringread-onlycurrent
mstInstanceInfoID
OBJECT-TYPE
MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.4.8Integer32read-writecurrent
qinqVlan
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.9
outerVlanEthtype
OBJECT-TYPE
Q-in-Q outer VLAN ether type
1.3.6.1.4.1.10297.202.7000.3.9.1DisplayStringread-writecurrent
qinqPortInfoTable
OBJECT-TYPE
The table of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2not-accessiblecurrent
qinqPortInfoEntry
OBJECT-TYPE
The entry of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2.1not-accessiblecurrent
qinqPortIndex
OBJECT-TYPE
The port index of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2.1.1INTEGER (1..65535)read-onlycurrent
qinqOuterPVID
OBJECT-TYPE
The Q-in-Q outer PVID
1.3.6.1.4.1.10297.202.7000.3.9.2.1.2INTEGER (1..4094)read-writecurrent
qinqOuterMode
OBJECT-TYPE
The Q-in-Q outer mode
1.3.6.1.4.1.10297.202.7000.3.9.2.1.3INTEGER {nni(1), uni(2)}read-writecurrent
garp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.10
garpJoinTime
OBJECT-TYPE
The GARP join time. Join time * 2 must be below leave time.
1.3.6.1.4.1.10297.202.7000.3.10.1INTEGER (1..600)read-writecurrent
garpLeaveTime
OBJECT-TYPE
The GARP leave time. The leave time must below leave all time and bigger then Join time * 2
1.3.6.1.4.1.10297.202.7000.3.10.2INTEGER (2..3000)read-writecurrent
garpLeaveAllTime
OBJECT-TYPE
The GARP leave all time. The leave all time must bigger then leave time.
1.3.6.1.4.1.10297.202.7000.3.10.3INTEGER (2..12000)read-writecurrent
gvrp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.11
gvrpStatus
OBJECT-TYPE
The status of GVRP.
1.3.6.1.4.1.10297.202.7000.3.11.1INTEGER {enable(1), disable(2)}read-writecurrent
xRingElite
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.12
xRingEliteState
OBJECT-TYPE
The status of X-Ring Elite.
1.3.6.1.4.1.10297.202.7000.3.12.1INTEGER {enable(1), disable(2)}read-writecurrent
xRingEliteRingIDTable
OBJECT-TYPE
The table of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2not-accessiblecurrent
xRingEliteRingIDEntry
OBJECT-TYPE
The entry of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2.1not-accessiblecurrent
xRingEliteRingIDIndex
OBJECT-TYPE
The index of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2.1.1Integer32 (1..512)read-onlycurrent
xRingEliteRingID
OBJECT-TYPE
The ring ID of X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.2Integer32 (1..255)read-writecurrent
xRingEliteRule
OBJECT-TYPE
The rule of the X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.3INTEGER {basic(1), couple(2), tunnel(3), mrm(4), mrc(5), legacy(6)}read-writecurrent
xRingElitePort1
OBJECT-TYPE
The port1 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.12.2.1.4Integer32read-writecurrent
xRingElitePort2
OBJECT-TYPE
The port2 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.12.2.1.5Integer32read-writecurrent
xRingEliteRingIDStatus
OBJECT-TYPE
The status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.6DisplayStringread-onlycurrent
xRingElitePort1Status
OBJECT-TYPE
The port1 status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.7DisplayStringread-onlycurrent
xRingElitePort2Status
OBJECT-TYPE
The port2 status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.8DisplayStringread-onlycurrent
xRingEliteRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.12.2.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
loopback
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.13
loopbackEnabled
OBJECT-TYPE
The status of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.1INTEGER {enable(1), disable(2)}read-writecurrent
loopbackInterval
OBJECT-TYPE
The interval of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.2Integer32 (1..32767)read-writecurrent
loopbackRecoverTime
OBJECT-TYPE
The recover time of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.3Integer32 (60..1000000)read-writecurrent
loopbackPortTable
OBJECT-TYPE
The port table of loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4not-accessiblecurrent
loopbackPortEntry
OBJECT-TYPE
The port entry of loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1not-accessiblecurrent
loopbackPortIndex
OBJECT-TYPE
The index of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.1Integer32 (1..65535)read-onlycurrent
loopbackPortEnabled
OBJECT-TYPE
The enabled status of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
loopbackPortLoopStatus
OBJECT-TYPE
The loop status of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.3INTEGER {normal(1), shutdown(2)}read-onlycurrent
xRingPro
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14
xRingProStatus
OBJECT-TYPE
The status of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.1INTEGER {enable(1), disable(2)}read-writecurrent
xRingProRingSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14.2
xRingProRingID
OBJECT-TYPE
The ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.2.1Integer32 (1..255)read-writecurrent
xRingProRingPort1
OBJECT-TYPE
The port1 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.2.2Integer32 (1..65535)read-writecurrent
xRingProRingPort2
OBJECT-TYPE
The port2 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.2.3Integer32 (1..65535)read-writecurrent
xRingProRingAdd
OBJECT-TYPE
The add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.2.4INTEGER {nothing(0), add(1)}read-writecurrent
xRingProCoupleSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14.3
xRingProCoupleID
OBJECT-TYPE
The couple ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.1Integer32 (1..255)read-writecurrent
xRingProCouplePort
OBJECT-TYPE
The couple port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.2Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
xRingProCoupleMasterRingID
OBJECT-TYPE
The master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.3Integer32 (1..255)read-writecurrent
xRingProCoupleAdd
OBJECT-TYPE
The add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.4INTEGER {nothing(0), add(1)}read-writecurrent
xRingProInfoTable
OBJECT-TYPE
The table of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4not-accessiblecurrent
xRingProInfoEntry
OBJECT-TYPE
The entry of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1not-accessiblecurrent
xRingProInfoRingID
OBJECT-TYPE
The ring ID of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.1Integer32 (1..255)read-onlycurrent
xRingProInfoMode
OBJECT-TYPE
The mode of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.2DisplayStringread-onlycurrent
xRingProInfoOperState
OBJECT-TYPE
The operation state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.3DisplayStringread-onlycurrent
xRingProInfoPort1
OBJECT-TYPE
The port1 of X-Ring Pro Infomation.
1.3.6.1.4.1.10297.202.7000.3.14.4.1.4DisplayStringread-onlycurrent
xRingProInfoPort1FwdState
OBJECT-TYPE
The port1 forwarding state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.5DisplayStringread-onlycurrent
xRingProInfoPort2
OBJECT-TYPE
The port2 of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.6DisplayStringread-onlycurrent
xRingProInfoPort2FwdState
OBJECT-TYPE
The port2 forwarding state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.7DisplayStringread-onlycurrent
xRingProInfoDel
OBJECT-TYPE
The delete action of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.8INTEGER {nothing(0), del(1)}read-writecurrent
xRingProInfoRole
OBJECT-TYPE
The role of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.9INTEGER {member(0), head(1), tail(2), none(3)}read-onlycurrent
xRingProPairSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14.5
xRingProPairID
OBJECT-TYPE
The pair ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.1Integer32 (1..255)read-writecurrent
xRingProPairPort
OBJECT-TYPE
The pair port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.2Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
xRingProPairMasterRingID
OBJECT-TYPE
The pair master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.3Integer32 (1..255)read-writecurrent
xRingProPairAdd
OBJECT-TYPE
The add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.4INTEGER {nothing(0), add(1)}read-writecurrent
xRingProRPairSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14.6
xRingProRPairID
OBJECT-TYPE
The R-pair ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.1Integer32 (1..255)read-writecurrent
xRingProRPairPort
OBJECT-TYPE
The R-pair port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.2Integer32 (1..65535)read-writecurrent
xRingProRPairMasterRingID
OBJECT-TYPE
The R-pair master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.3Integer32 (1..255)read-writecurrent
xRingProRPairAdd
OBJECT-TYPE
The add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.4INTEGER {nothing(0), add(1)}read-writecurrent
xRingProChainSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.14.7
xRingProChainID
OBJECT-TYPE
The chain ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.7.1Integer32 (1..255)read-writecurrent
xRingProChainRole
OBJECT-TYPE
The role of X-Ring Pro.
1.3.6.1.4.1.10297.202.7000.3.14.7.2INTEGER {member(0), head(1), tail(2)}read-writecurrent
xRingProChainHeadPort
OBJECT-TYPE
The head port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.7.3Integer32 (1..65535)read-writecurrent
xRingProChainMemberPort
OBJECT-TYPE
The member port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.7.4Integer32 (1..65535)read-writecurrent
xRingProChainAdd
OBJECT-TYPE
The add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.7.5INTEGER {nothing(0), add(1)}read-writecurrent
gmrp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.15
gmrpStatus
OBJECT-TYPE
The status of GMRP.
1.3.6.1.4.1.10297.202.7000.3.15.1INTEGER {enable(1), disable(2)}read-writecurrent
gmrpMulticastGroupTable
OBJECT-TYPE
The table of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2not-accessiblecurrent
gmrpMulticastGroupEntry
OBJECT-TYPE
The entry of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1not-accessiblecurrent
gmrpMulticastGroupIndex
OBJECT-TYPE
The index of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.1Integer32 (1..10)read-onlycurrent
gmrpMulticastGroupVlanId
OBJECT-TYPE
The vlan id of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.2Integer32 (1..4094)read-onlycurrent
gmrpMulticastGroupMacAddress
OBJECT-TYPE
The MAC address of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.3DisplayStringread-onlycurrent
gmrpMulticastGroupType
OBJECT-TYPE
The type of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.4INTEGER {static(1), dynamic(2)}read-onlycurrent
gmrpMulticastGroupMemberPorts
OBJECT-TYPE
The member ports of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.5DisplayStringread-onlycurrent
erps
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.3.16
erpsState
OBJECT-TYPE
The status of ERPS
1.3.6.1.4.1.10297.202.7000.3.16.1INTEGER {enable(1), disable(2)}read-writecurrent
erpsGroupTable
OBJECT-TYPE
The table of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2not-accessiblecurrent
erpsGroupEntry
OBJECT-TYPE
The entry of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1not-accessiblecurrent
erpsGroupRingIndex
OBJECT-TYPE
The index of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.1Integer32 (1..255)read-onlycurrent
erpsGroupInstance
OBJECT-TYPE
The instance of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.2Integer32 (1..8)read-writecurrent
erpsGroupRingId
OBJECT-TYPE
The ring ID of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.3Integer32 (1..255)read-writecurrent
erpsGroupRole
OBJECT-TYPE
The role of ERPS group
1.3.6.1.4.1.10297.202.7000.3.16.2.1.4INTEGER {rplowner(0), rplneighbor(1), other(2)}read-writecurrent
erpsGroupState
OBJECT-TYPE
The current state of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.5DisplayStringread-onlycurrent
erpsGroupEastLinkRPL
OBJECT-TYPE
The rpl setting of ERPS group east link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.7INTEGER {rpl(1), n-rpl(2)}read-writecurrent
erpsGroupEastLinkState
OBJECT-TYPE
The current state of ERPS group east link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.8DisplayStringread-onlycurrent
erpsGroupWestLinkRPL
OBJECT-TYPE
The rpl setting of ERPS group west link
1.3.6.1.4.1.10297.202.7000.3.16.2.1.10INTEGER {rpl(1), n-rpl(2)}read-writecurrent
erpsGroupWestLinkState
OBJECT-TYPE
The current state of ERPS group west link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.11DisplayStringread-onlycurrent
erpsGroupMEL
OBJECT-TYPE
The MEL of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.12Integer32 (0..7)read-writecurrent
erpsGroupRAPSChannelVlan
OBJECT-TYPE
The r-aps channel vlan of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.13Integer32 (1..4094)read-writecurrent
erpsGroupTrafficChannel
OBJECT-TYPE
The traffic channel of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.14Integer32 (0..15)read-writecurrent
erpsGroupRevertive
OBJECT-TYPE
The revertive setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.15INTEGER {revertive(1), none-revertive(2)}read-writecurrent
erpsGroupType
OBJECT-TYPE
The ring type of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.16INTEGER {majorRing(1), subRing(2)}read-writecurrent
erpsGroupInterconnected
OBJECT-TYPE
The interconnected setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.17INTEGER {interconnected(1), none-interconnected(2)}read-writecurrent
erpsGroupChannel
OBJECT-TYPE
The virtual channel setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.18INTEGER {with-virtual-channel(1), without-virtual-channel(2)}read-writecurrent
erpsGroupTcPropagation
OBJECT-TYPE
The tc-propagation setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.19INTEGER {tc-propagation(1), none-tc-propagation(2)}read-writecurrent
erpsWTRTimer
OBJECT-TYPE
The WTR timer of ERPS group.(1 Unit = 1 minute)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.20Integer32 (1..12)read-writecurrent
erpsGuardTimer
OBJECT-TYPE
The guard timer of ERPS group.(1 Unit = 10 ms)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.21Integer32 (1..200)read-writecurrent
erpsHoldOffTimer
OBJECT-TYPE
The hold-off timer of ERPS group.(1 Unit = 100 ms)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.22Integer32 (0..100)read-writecurrent
erpsGroupRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.99INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
macAddressTable
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.4
staticMacSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.4.1
staticMacSettingTable
OBJECT-TYPE
The table of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1not-accessiblecurrent
staticMacSettingEntry
OBJECT-TYPE
The entry of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1.1not-accessiblecurrent
staticMacSettingIndex
OBJECT-TYPE
The index of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1.1.1Integer32 (1..256)read-onlycurrent
staticMacSettingMacAddress
OBJECT-TYPE
The MAC address to which packets will be statically forwardef. It only supports unicast MAC address
1.3.6.1.4.1.10297.202.7000.4.1.1.1.2DisplayStringread-writecurrent
staticMacSettingVlan
OBJECT-TYPE
the VLAN which the static MAC belongs to
1.3.6.1.4.1.10297.202.7000.4.1.1.1.3Integer32 (1..4094)read-writecurrent
staticMacSettingPort
OBJECT-TYPE
the port number of the MAC entry. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.4.1.1.1.4Integer32read-writecurrent
staticMacSettingRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.4.1.1.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
dynamicMacSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.4.2
macAgingTime
OBJECT-TYPE
The dynamic MAC address aging out value
1.3.6.1.4.1.10297.202.7000.4.2.1Integer32 (10..630)read-writecurrent
dynamicLearned
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.4.3
clearMacAddressTable
OBJECT-TYPE
Clear the MAC table
1.3.6.1.4.1.10297.202.7000.4.3.1INTEGER {clear(1)}read-writecurrent
macAddressInfoTable
OBJECT-TYPE
The table of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2not-accessiblecurrent
macAddressInfoEntry
OBJECT-TYPE
The entry of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1not-accessiblecurrent
macAddressInfoIndex
OBJECT-TYPE
The index of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.1Integer32 (1..65535)read-onlycurrent
macAddressInfoMAC
OBJECT-TYPE
The MAC address to show dynamic MAC entries.
1.3.6.1.4.1.10297.202.7000.4.3.2.1.2DisplayStringread-onlycurrent
macAddressInfoVlan
OBJECT-TYPE
The VLAN to show dynamic MAC entries.
1.3.6.1.4.1.10297.202.7000.4.3.2.1.3Integer32 (1..4094)read-onlycurrent
macAddressInfoType
OBJECT-TYPE
The type of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.4INTEGER {static(1), dynamic(2)}read-onlycurrent
macAddressInfoPort
OBJECT-TYPE
The port of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.5DisplayStringread-onlycurrent
addtoStaticMacTable
OBJECT-TYPE
Add the entry from dynamic to static.
1.3.6.1.4.1.10297.202.7000.4.3.2.1.6INTEGER {nothing(0), addtoStaticMac(1)}read-writecurrent
security
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5
stormControl
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.1
stromControlUnit
OBJECT-TYPE
The mode of stromg control. pps: strom control rate calculates by packet-based bps: strom control rate calculates by octet-based
1.3.6.1.4.1.10297.202.7000.5.1.1INTEGER {pps(1), bps(2)}read-writecurrent
stromControlPreamble_IFG
OBJECT-TYPE
the rate calculates w/o preamble & IFG (20 bytes) Excluded: exclude preamble & IFG (20 bytes) when count ingress storm control rate. Included: include preamble & IFG (20 bytes) when count ingress storm control rate.
1.3.6.1.4.1.10297.202.7000.5.1.2INTEGER {excluded(1), included(2)}read-writecurrent
stromControlPortTable
OBJECT-TYPE
The table of port security setting
1.3.6.1.4.1.10297.202.7000.5.1.3not-accessiblecurrent
stromControlPortEntry
OBJECT-TYPE
The entry of port security setting
1.3.6.1.4.1.10297.202.7000.5.1.3.1not-accessiblecurrent
stromControlPortIndex
OBJECT-TYPE
The port index of port security setting
1.3.6.1.4.1.10297.202.7000.5.1.3.1.1Integer32 (1..65535)read-onlycurrent
stromControlPortState
OBJECT-TYPE
the state of setting
1.3.6.1.4.1.10297.202.7000.5.1.3.1.2INTEGER {enable(1), disable(2)}read-writecurrent
stromControlPortAction
OBJECT-TYPE
the state of setting Drop: Packets exceed storm control rate will be droped. Shutdown: Port exceed storm control rate will be shutdown.
1.3.6.1.4.1.10297.202.7000.5.1.3.1.3INTEGER {drop(1), shutdown(2)}read-writecurrent
enablebroadcast
OBJECT-TYPE
enable/diable the broadcast packet
1.3.6.1.4.1.10297.202.7000.5.1.3.1.4INTEGER {enable(1), disable(2)}read-writecurrent
broadcastRate
OBJECT-TYPE
Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.4.1.10297.202.7000.5.1.3.1.5Integer32 (1..1000000)read-writecurrent
enableunknownMulticast
OBJECT-TYPE
enable/diable the unknown multicast packet
1.3.6.1.4.1.10297.202.7000.5.1.3.1.6INTEGER {enable(1), disable(2)}read-writecurrent
unknownMulticastRate
OBJECT-TYPE
Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.4.1.10297.202.7000.5.1.3.1.7Integer32 (1..1000000)read-writecurrent
enableunknownUnicast
OBJECT-TYPE
enable/diable the unknown unicast packet
1.3.6.1.4.1.10297.202.7000.5.1.3.1.8INTEGER {enable(1), disable(2)}read-writecurrent
unknownUnicastRate
OBJECT-TYPE
Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.4.1.10297.202.7000.5.1.3.1.9Integer32 (1..1000000)read-writecurrent
protectedPort
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.2
protectedPortTable
OBJECT-TYPE
The table of protected port
1.3.6.1.4.1.10297.202.7000.5.2.1not-accessiblecurrent
protectedPortEntry
OBJECT-TYPE
The entry of protected port
1.3.6.1.4.1.10297.202.7000.5.2.1.1not-accessiblecurrent
protectedPortIndex
OBJECT-TYPE
The port index of protected port
1.3.6.1.4.1.10297.202.7000.5.2.1.1.1Integer32 (1..65535)read-onlycurrent
protectedPortType
OBJECT-TYPE
Configure port protect type Unprotected: Unprotected port can communicate with all ports. Protected: Prevent protected ports from communication with each other.
1.3.6.1.4.1.10297.202.7000.5.2.1.1.2INTEGER {unprotected(1), porotected(2)}read-writecurrent
dos
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.3
dmacEqualsmac
OBJECT-TYPE
Both the source and the destination MAC addresses are the same
1.3.6.1.4.1.10297.202.7000.5.3.1INTEGER {enable(1), disable(2)}read-writecurrent
land
OBJECT-TYPE
Both the source and the destination IPv4/IPv6 addresses are the same
1.3.6.1.4.1.10297.202.7000.5.3.2INTEGER {enable(1), disable(2)}read-writecurrent
udpBlat
OBJECT-TYPE
Both the source and the destination UDP port are the same
1.3.6.1.4.1.10297.202.7000.5.3.3INTEGER {enable(1), disable(2)}read-writecurrent
tcpBlat
OBJECT-TYPE
Both the source and the destination TCP port are the same
1.3.6.1.4.1.10297.202.7000.5.3.4INTEGER {enable(1), disable(2)}read-writecurrent
pod
OBJECT-TYPE
Ping packets that length are larger than 65535 bytes
1.3.6.1.4.1.10297.202.7000.5.3.5INTEGER {enable(1), disable(2)}read-writecurrent
ipv6MinFragment
OBJECT-TYPE
IPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed.
1.3.6.1.4.1.10297.202.7000.5.3.6INTEGER {enable(1), disable(2)}read-writecurrent
ipv6MinFragmentValue
OBJECT-TYPE
IPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed.
1.3.6.1.4.1.10297.202.7000.5.3.7Integer32 (0..65535)read-writecurrent
icmpFragment
OBJECT-TYPE
Fragmented ICMP packets.
1.3.6.1.4.1.10297.202.7000.5.3.8INTEGER {enable(1), disable(2)}read-writecurrent
ipv4PingMaxSize
OBJECT-TYPE
IPv4 PING packet with the length
1.3.6.1.4.1.10297.202.7000.5.3.9INTEGER {enable(1), disable(2)}read-writecurrent
ipv6PingMaxSize
OBJECT-TYPE
IPv6 PING packet with the length
1.3.6.1.4.1.10297.202.7000.5.3.10INTEGER {enable(1), disable(2)}read-writecurrent
pingMaxSizeSetting
OBJECT-TYPE
Ping packet Max Size Setting. The default value is 512 Bytes, it can be configured if needed.
1.3.6.1.4.1.10297.202.7000.5.3.11Integer32 (0..65535)read-writecurrent
smurfAttack
OBJECT-TYPE
ICMP echo request packet that destination IPv4 address is broadcast address.
1.3.6.1.4.1.10297.202.7000.5.3.12INTEGER {enable(1), disable(2)}read-writecurrent
smurfAttackValue
OBJECT-TYPE
The default Netmask length is 0, and it can be configured if needed.
1.3.6.1.4.1.10297.202.7000.5.3.13Integer32 (0..32)read-writecurrent
tcpMinHdrSize
OBJECT-TYPE
TCP packet that header length is less than the configured value.
1.3.6.1.4.1.10297.202.7000.5.3.14INTEGER {enable(1), disable(2)}read-writecurrent
tcpMinHdrSizeValue
OBJECT-TYPE
The default TCP Min Hdr Size is 20, it can be configured if needed.
1.3.6.1.4.1.10297.202.7000.5.3.15Integer32 (0..31)read-writecurrent
tcp_Syn
OBJECT-TYPE
TCP SYN packets with source port less than 1024.
1.3.6.1.4.1.10297.202.7000.5.3.16INTEGER {enable(1), disable(2)}read-writecurrent
nullScanAttack
OBJECT-TYPE
TCP sequence number is zero, and all control flags are zeroes.
1.3.6.1.4.1.10297.202.7000.5.3.17INTEGER {enable(1), disable(2)}read-writecurrent
xMasScanAttack
OBJECT-TYPE
TCP sequence number is zero, and the FIN/URG/PSH flags are set.
1.3.6.1.4.1.10297.202.7000.5.3.18INTEGER {enable(1), disable(2)}read-writecurrent
tcpSYN_FINAttack
OBJECT-TYPE
A TCP packet with the SYN and FIN flags set.
1.3.6.1.4.1.10297.202.7000.5.3.19INTEGER {enable(1), disable(2)}read-writecurrent
tcpSYN_RSTAttack
OBJECT-TYPE
A TCP packet with the SYN and RST flags set.
1.3.6.1.4.1.10297.202.7000.5.3.20INTEGER {enable(1), disable(2)}read-writecurrent
tcpFragment
OBJECT-TYPE
Fragmented TCP packets.
1.3.6.1.4.1.10297.202.7000.5.3.21INTEGER {enable(1), disable(2)}read-writecurrent
dosPortTable
OBJECT-TYPE
The table of DoS port
1.3.6.1.4.1.10297.202.7000.5.3.22not-accessiblecurrent
dosPortEntry
OBJECT-TYPE
The entry of DoS port
1.3.6.1.4.1.10297.202.7000.5.3.22.1not-accessiblecurrent
dosportIndex
OBJECT-TYPE
The port index of DoS port
1.3.6.1.4.1.10297.202.7000.5.3.22.1.1Integer32 (1..65535)read-onlycurrent
dosProtection
OBJECT-TYPE
Configure port protect state
1.3.6.1.4.1.10297.202.7000.5.3.22.1.2INTEGER {enable(1), disable(2)}read-writecurrent
access
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.4
telnetInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.4.1
telnetService
OBJECT-TYPE
enable/disable the tlent service
1.3.6.1.4.1.10297.202.7000.5.4.1.1INTEGER {enable(1), disable(2)}read-writecurrent
currentTelnetSessionCount
OBJECT-TYPE
The current telnet session counter
1.3.6.1.4.1.10297.202.7000.5.4.1.2Integer32read-onlycurrent
httpSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.4.2
httpService
OBJECT-TYPE
enable/disable the http service
1.3.6.1.4.1.10297.202.7000.5.4.2.1INTEGER {enable(1), disable(2)}read-writecurrent
httpSessionTimeout
OBJECT-TYPE
the HTTP session timeout
1.3.6.1.4.1.10297.202.7000.5.4.2.2Integer32 (0..86400)read-writecurrent
httpsSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.4.3
httpsService
OBJECT-TYPE
enable/disable the https service
1.3.6.1.4.1.10297.202.7000.5.4.3.1INTEGER {enable(1), disable(2)}read-writecurrent
httpsSessionTimeout
OBJECT-TYPE
the HTTPs session timeout
1.3.6.1.4.1.10297.202.7000.5.4.3.2Integer32 (0..86400)read-writecurrent
sshInfo
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.4.4
sshService
OBJECT-TYPE
enable/disable the ssh service
1.3.6.1.4.1.10297.202.7000.5.4.4.1INTEGER {enable(1), disable(2)}read-writecurrent
portSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.5
portSecurityTable
OBJECT-TYPE
The table of port security
1.3.6.1.4.1.10297.202.7000.5.5.1not-accessiblecurrent
portSecurityEntry
OBJECT-TYPE
The entry of port security
1.3.6.1.4.1.10297.202.7000.5.5.1.1not-accessiblecurrent
portSecurityPortIndex
OBJECT-TYPE
The port index of port security
1.3.6.1.4.1.10297.202.7000.5.5.1.1.1Integer32 (1..65535)read-onlycurrent
portSecurityEnabled
OBJECT-TYPE
Enable/Disable port security
1.3.6.1.4.1.10297.202.7000.5.5.1.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
portSecurityFDBLimit
OBJECT-TYPE
The number of FDB learning.
1.3.6.1.4.1.10297.202.7000.5.5.1.1.3Integer32 (0..64)read-writecurrent
portSecurityViolationMACNotify
OBJECT-TYPE
Enable/Disable Violation MAC Notification
1.3.6.1.4.1.10297.202.7000.5.5.1.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
ipSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.6
ipSecurityStatus
OBJECT-TYPE
Enable/Disable IP security
1.3.6.1.4.1.10297.202.7000.5.6.1INTEGER {enabled(1), disabled(2)}read-writecurrent
ipSecurityTable
OBJECT-TYPE
The table of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2not-accessiblecurrent
ipSecurityEntry
OBJECT-TYPE
The entry of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2.1not-accessiblecurrent
ipSecurityIndex
OBJECT-TYPE
The index of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2.1.1Integer32 (1..10)read-onlycurrent
ipSecurityIPAddr
OBJECT-TYPE
The IP address of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2.1.2IpAddressread-writecurrent
ipSecurityIPMask
OBJECT-TYPE
The IP mask of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2.1.3IpAddressread-writecurrent
ipSecurityService
OBJECT-TYPE
The service of IP security
1.3.6.1.4.1.10297.202.7000.5.6.2.1.4Bits {ping(0), http(1), telnet(2), ssh(3), snmp(4)}read-writecurrent
ipSecurityVlanId
OBJECT-TYPE
The VLAN id of IP security. This value will appear on multiple interface.
1.3.6.1.4.1.10297.202.7000.5.6.2.1.5Integer32 (1..4094)read-writecurrent
ipSecurityRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.5.6.2.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-writecurrent
ieee8021x
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.7
ieee8021xState
OBJECT-TYPE
Enable/Disable IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.1INTEGER {enabled(1), disabled(2)}read-writecurrent
ieee8021xServerIP
OBJECT-TYPE
The server IP address of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.2IpAddressread-writecurrent
ieee8021xServerPort
OBJECT-TYPE
The server port of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.3Integer32 (1..65535)read-writecurrent
ieee8021xAccountingPort
OBJECT-TYPE
The accounting port of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.4Integer32 (1..65535)read-writecurrent
ieee8021xSecurityKey
OBJECT-TYPE
The security key of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.5DisplayStringread-writecurrent
ieee8021xReauthPeriod
OBJECT-TYPE
The reauth period of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.6Integer32 (1..65535)read-writecurrent
ieee8021xPortTable
OBJECT-TYPE
The table of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.7not-accessiblecurrent
ieee8021xPortEntry
OBJECT-TYPE
The entry of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.7.1not-accessiblecurrent
ieee8021xPortIndex
OBJECT-TYPE
The index of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.7.1.1Integer32 (1..65535)read-onlycurrent
ieee8021xPortState
OBJECT-TYPE
The port state of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.7.1.2INTEGER {authorize(1), disabled(2)}read-writecurrent
ieee8021xAuthBased
OBJECT-TYPE
The authentication based of IEEE 802.1x
1.3.6.1.4.1.10297.202.7000.5.7.8INTEGER {port(1), mac(2), mac-auth-bypass(3)}read-writecurrent
securityLogin
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.8
securityLoginState
OBJECT-TYPE
Enable/Disable security login.
1.3.6.1.4.1.10297.202.7000.5.8.1INTEGER {enabled(1), disabled(2)}read-writecurrent
radiusServer
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.8.2
radiusServerIP
OBJECT-TYPE
Radius server IP.
1.3.6.1.4.1.10297.202.7000.5.8.2.1IpAddressread-writecurrent
radiusServerPort
OBJECT-TYPE
Radius server port.
1.3.6.1.4.1.10297.202.7000.5.8.2.2Integer32 (1..65535)read-writecurrent
radiusServerSecurityKey
OBJECT-TYPE
The security key of radius server.
1.3.6.1.4.1.10297.202.7000.5.8.2.3DisplayStringread-writecurrent
tacacsServer
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.8.3
tacacsServerIP
OBJECT-TYPE
TACACS server IP.
1.3.6.1.4.1.10297.202.7000.5.8.3.1IpAddressread-writecurrent
tacacsServerPort
OBJECT-TYPE
TACACS server port.
1.3.6.1.4.1.10297.202.7000.5.8.3.2Integer32 (1..65535)read-writecurrent
tacacsServerSecurityKey
OBJECT-TYPE
The security key of TACACS server.
1.3.6.1.4.1.10297.202.7000.5.8.3.3DisplayStringread-writecurrent
securityLoginType
OBJECT-TYPE
Enable/Disable security login.
1.3.6.1.4.1.10297.202.7000.5.8.4INTEGER {none(0), radius(1), tacacs(2), radiusAndtacacs(3), radiusAndtacacsAndweb(4)}read-writecurrent
securityLoginHttpState
OBJECT-TYPE
Enable/Disable HTTP type of security login.
1.3.6.1.4.1.10297.202.7000.5.8.5INTEGER {enabled(1), disabled(2)}read-writecurrent
securityLoginTelnetState
OBJECT-TYPE
Enable/Disable telnet type of security login.
1.3.6.1.4.1.10297.202.7000.5.8.6INTEGER {enabled(1), disabled(2)}read-writecurrent
securityLoginSSHState
OBJECT-TYPE
Enable/Disable SSH type of security login.
1.3.6.1.4.1.10297.202.7000.5.8.7INTEGER {enabled(1), disabled(2)}read-writecurrent
acl
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.9
macAclTable
OBJECT-TYPE
The table of mac acl
1.3.6.1.4.1.10297.202.7000.5.9.1not-accessiblecurrent
macAclEntry
OBJECT-TYPE
The entry of mac acl
1.3.6.1.4.1.10297.202.7000.5.9.1.1not-accessiblecurrent
macAclIndex
OBJECT-TYPE
The index of mac ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.1.1.1Integer32 (1..250)read-writecurrent
destinationMacAddress
OBJECT-TYPE
The destination MAC address of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.2DisplayStringread-writecurrent
destinationMacMask
OBJECT-TYPE
The destination MAC mask of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.3DisplayStringread-writecurrent
sourceMacAddress
OBJECT-TYPE
The source MAC address of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.4DisplayStringread-writecurrent
sourceMacMask
OBJECT-TYPE
The source MAC mask of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.5DisplayStringread-writecurrent
macAclEtherType
OBJECT-TYPE
The ether type of mac ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.1.1.6Integer32 (1..65535)read-writecurrent
macAclVlanID
OBJECT-TYPE
The vlan id of mac ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.1.1.7Integer32 (1..4094)read-writecurrent
macAclPortList
OBJECT-TYPE
The port list of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.8Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
macAclAction
OBJECT-TYPE
The action of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.9INTEGER {permit(1), drop(2)}read-writecurrent
macAclActiveStatus
OBJECT-TYPE
The active status of mac ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.10INTEGER {active(1), inactive(2)}read-writecurrent
macAclRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.5.9.1.1.99INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
ipAclTable
OBJECT-TYPE
The table of ip acl
1.3.6.1.4.1.10297.202.7000.5.9.2not-accessiblecurrent
ipAclEntry
OBJECT-TYPE
The entry of ip acl
1.3.6.1.4.1.10297.202.7000.5.9.2.1not-accessiblecurrent
ipAclIndex
OBJECT-TYPE
The index of ip ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.2.1.1Integer32 (1..250)read-writecurrent
destinationIpAddress
OBJECT-TYPE
The destination ip address of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.2IpAddressread-writecurrent
destinationIpMask
OBJECT-TYPE
The destination ip mask of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.3IpAddressread-writecurrent
sourceIpAddress
OBJECT-TYPE
The source ip address of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.4IpAddressread-writecurrent
sourceIpMask
OBJECT-TYPE
The source ip mask of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.5IpAddressread-writecurrent
ipProtocol
OBJECT-TYPE
The ip protocol of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.6INTEGER {none(1), icmp(2), tcp(3), udp(4)}read-writecurrent
l4DestinationPort
OBJECT-TYPE
The L4 destination port of ip ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.2.1.7Integer32 (1..65535)read-writecurrent
l4SourcePort
OBJECT-TYPE
The L4 source port of ip ACL entry
1.3.6.1.4.1.10297.202.7000.5.9.2.1.8Integer32 (1..65535)read-writecurrent
ipAclPortList
OBJECT-TYPE
The port list of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.9Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
ipAclAction
OBJECT-TYPE
The action of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.10INTEGER {permit(1), drop(2)}read-writecurrent
ipAclActiveStatus
OBJECT-TYPE
The active status of ip ACL entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.11INTEGER {active(1), inactive(2)}read-writecurrent
ipAclRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.5.9.2.1.99INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
ipSourceGuard
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.10
ipSourceGuardEnablePorts
OBJECT-TYPE
The enable port list for ip source guard.
1.3.6.1.4.1.10297.202.7000.5.10.1Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
ipSourceGuardTable
OBJECT-TYPE
The table of ip source guard
1.3.6.1.4.1.10297.202.7000.5.10.2not-accessiblecurrent
ipSourceGuardEntry
OBJECT-TYPE
The entry of ip source guard
1.3.6.1.4.1.10297.202.7000.5.10.2.1not-accessiblecurrent
ipSourceGuardIndex
OBJECT-TYPE
The index of ip source guard entry
1.3.6.1.4.1.10297.202.7000.5.10.2.1.1Integer32 (1..64)read-onlycurrent
ipSourceGuardSourceIp
OBJECT-TYPE
The destination ip address of ip source guard entry.
1.3.6.1.4.1.10297.202.7000.5.10.2.1.2IpAddressread-writecurrent
ipSourceGuardSourceMac
OBJECT-TYPE
The destination MAC address of ip source guard entry.
1.3.6.1.4.1.10297.202.7000.5.10.2.1.3DisplayStringread-writecurrent
ipSourceGuardPort
OBJECT-TYPE
The port of ip source guard entry
1.3.6.1.4.1.10297.202.7000.5.10.2.1.4Integer32 (1..65535)read-writecurrent
ipSourceGuardRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.5.10.2.1.5INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
dhcpSnooping
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.11
dhcpSnoopingState
OBJECT-TYPE
Enable/Disable DHCP snooping.
1.3.6.1.4.1.10297.202.7000.5.11.1INTEGER {enabled(1), disabled(2)}read-writecurrent
dhcpSnoopingPorts
OBJECT-TYPE
The enable port list for dhcp snooping.
1.3.6.1.4.1.10297.202.7000.5.11.2Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
dhcpSnoopingBindingPorts
OBJECT-TYPE
The enable blinding port list for dhcp snooping.
1.3.6.1.4.1.10297.202.7000.5.11.3Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
dhcpSnoopingTable
OBJECT-TYPE
The table of dhcp snooping
1.3.6.1.4.1.10297.202.7000.5.11.4not-accessiblecurrent
dhcpSnoopingEntry
OBJECT-TYPE
The entry of dhcp snooping
1.3.6.1.4.1.10297.202.7000.5.11.4.1not-accessiblecurrent
dhcpSnoopingIndex
OBJECT-TYPE
The index of dhcp snooping entry
1.3.6.1.4.1.10297.202.7000.5.11.4.1.1Integer32 (1..64)read-onlycurrent
dhcpSnoopingMac
OBJECT-TYPE
The destination MAC address of dhcp snooping entry.
1.3.6.1.4.1.10297.202.7000.5.11.4.1.2DisplayStringread-onlycurrent
dhcpSnoopingIp
OBJECT-TYPE
The destination ip address of dhcp snooping entry.
1.3.6.1.4.1.10297.202.7000.5.11.4.1.3IpAddressread-onlycurrent
dhcpSnoopingLeaseTime
OBJECT-TYPE
The lease time of dhcp snooping entry
1.3.6.1.4.1.10297.202.7000.5.11.4.1.4INTEGER (60..864000)read-onlycurrent
dhcpSnoopingVlanId
OBJECT-TYPE
The VLAN ID of dhcp snooping entry
1.3.6.1.4.1.10297.202.7000.5.11.4.1.5Integer32 (1..4094)read-onlycurrent
dhcpSnoopingPort
OBJECT-TYPE
The port of dhcp snooping entry
1.3.6.1.4.1.10297.202.7000.5.11.4.1.6Integer32 (1..65535)read-onlycurrent
arpSpoofing
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.5.12
arpSpoofingTable
OBJECT-TYPE
The table of arp spoofing
1.3.6.1.4.1.10297.202.7000.5.12.1not-accessiblecurrent
arpSpoofingEntry
OBJECT-TYPE
The entry of arp spoofing
1.3.6.1.4.1.10297.202.7000.5.12.1.1not-accessiblecurrent
arpSpoofingIndex
OBJECT-TYPE
The index of arp spoofing entry
1.3.6.1.4.1.10297.202.7000.5.12.1.1.1Integer32 (1..64)read-onlycurrent
arpSpoofingSourceMac
OBJECT-TYPE
The source MAC address of arp spoofing entry.
1.3.6.1.4.1.10297.202.7000.5.12.1.1.2DisplayStringread-writecurrent
arpSpoofingSourceIp
OBJECT-TYPE
The source ip address of arp spoofing entry.
1.3.6.1.4.1.10297.202.7000.5.12.1.1.3IpAddressread-writecurrent
arpSpoofingRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.5.12.1.1.4INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
qos
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6
general
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.1
qosMode
OBJECT-TYPE
The QoS operaion mode
1.3.6.1.4.1.10297.202.7000.6.1.1INTEGER {basic(1), disable(2)}read-writecurrent
qosPortSettingTable
OBJECT-TYPE
The table of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2not-accessiblecurrent
qosPortSettingEntry
OBJECT-TYPE
The entry of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2.1not-accessiblecurrent
qosPortIndex
OBJECT-TYPE
The port index of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2.1.1Integer32 (1..65535)read-onlycurrent
qosPortCos
OBJECT-TYPE
The default CoS/802.1p priority value
1.3.6.1.4.1.10297.202.7000.6.1.2.1.2Integer32 (0..7)read-writecurrent
qosPortRemarkCoS
OBJECT-TYPE
enable/disable CoS remark
1.3.6.1.4.1.10297.202.7000.6.1.2.1.3INTEGER {enable(1), disable(2)}read-writecurrent
qosPortRemarkDSCP
OBJECT-TYPE
enable/disable DSCP remark
1.3.6.1.4.1.10297.202.7000.6.1.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
qosPortRemarkIPPrecedence
OBJECT-TYPE
Enable/Disable IP Precedence remark
1.3.6.1.4.1.10297.202.7000.6.1.2.1.5INTEGER {enable(1), disable(2)}read-writecurrent
queueSettingTable
OBJECT-TYPE
The table of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3not-accessiblecurrent
queueSettingEntry
OBJECT-TYPE
the entry of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3.1not-accessiblecurrent
queueIndex
OBJECT-TYPE
The index of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3.1.1Integer32 (1..8)read-onlycurrent
queueMethod
OBJECT-TYPE
queue to strict priority type or Weight round robin type
1.3.6.1.4.1.10297.202.7000.6.1.3.1.2INTEGER {strictPriority(1), wrr(2)}read-writecurrent
queueWeight
OBJECT-TYPE
If the queue type is WRR, set the queue weight for the queue.
1.3.6.1.4.1.10297.202.7000.6.1.3.1.3Integer32read-writecurrent
queuePercentOfWRRBandwidth
OBJECT-TYPE
The percentage of the WRR bandwidth
1.3.6.1.4.1.10297.202.7000.6.1.3.1.4DisplayStringread-onlycurrent
costoQueueMapTable
OBJECT-TYPE
The table of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4not-accessiblecurrent
costoQueueMapEntry
OBJECT-TYPE
The entry of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1not-accessiblecurrent
cosIndex
OBJECT-TYPE
The index of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1.1Integer32 (0..8)read-onlycurrent
cosQueue
OBJECT-TYPE
The queue of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1.2Integer32 (1..8)read-writecurrent
queuetoCosMapTable
OBJECT-TYPE
The table of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5not-accessiblecurrent
queuetoCosMapEntry
OBJECT-TYPE
The entry of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1not-accessiblecurrent
queuetoCosIndex
OBJECT-TYPE
The queue index of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1.1Integer32 (1..8)read-onlycurrent
queueCos
OBJECT-TYPE
The cos of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1.2Integer32 (0..7)read-writecurrent
dscptoQueueMapTable
OBJECT-TYPE
The table of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6not-accessiblecurrent
dscptoQueueMapEntry
OBJECT-TYPE
The entry of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1not-accessiblecurrent
dscpIndex
OBJECT-TYPE
The DSCP index of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1.1Integer32 (0..64)read-onlycurrent
dscpQueue
OBJECT-TYPE
The queue of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1.2Integer32 (1..8)read-writecurrent
queuetoDSCPMapTable
OBJECT-TYPE
The table of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7not-accessiblecurrent
queuetoDSCPMapEntry
OBJECT-TYPE
The entry of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1not-accessiblecurrent
queuetoDSCPIndex
OBJECT-TYPE
The queue index of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1.1Integer32 (1..8)read-onlycurrent
queuDscp
OBJECT-TYPE
The DSCP of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1.2Integer32 (0..63)read-writecurrent
ipPrecedencetoQueueMapTable
OBJECT-TYPE
The table of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8not-accessiblecurrent
ipPrecedencetoQueueMapEntry
OBJECT-TYPE
The entry of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1not-accessiblecurrent
ipPrecedenceIndex
OBJECT-TYPE
The index of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1.1Integer32 (0..8)read-onlycurrent
ipPrecedenceQueue
OBJECT-TYPE
The queue of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1.2Integer32 (1..8)read-writecurrent
queueToipPrecedenceMapTable
OBJECT-TYPE
The table of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9not-accessiblecurrent
queueToipPrecedenceMapEntry
OBJECT-TYPE
The entry of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1not-accessiblecurrent
queueToipPrecedenceIndex
OBJECT-TYPE
The index of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1.1Integer32 (1..8)read-onlycurrent
ipPrecedence
OBJECT-TYPE
The IP precedence of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1.2Integer32 (0..7)read-writecurrent
qosBasicMode
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.2
trustMode
OBJECT-TYPE
the QoS operation mode. CoS/802.1p: Traffic is mapped to queues based on the CoS field in the VLAN tag, or based on the per-port default CoS value if there is no VLAN tag on the incoming packet. DSCP: All IP traffic is mapped to queues based on the DSCP field in the IP header. If traffic is not IP traffic, it is mapped to the lowest priority queue. CoS/802.1p-DSCP: All IP traffic is mapped to queues based on the DSCP field in the IP header. If traffic is not IP but has VLAN tag, mapped to queues based on the CoS value in the VLAN tag. IP Precedence: All IP traffic is mapped to queues based on the IP Precedence field in the IP header. If traffic is not IP traffic, it is mapped to the lowest priority queue. None: All traffic is mapped to the lowest priority queue.
1.3.6.1.4.1.10297.202.7000.6.2.1INTEGER {cos-8021p(1), dscp(2), cos8021p-dscp(3), ip-precendence(4), none(5)}read-writecurrent
qosBasicPortTable
OBJECT-TYPE
The table of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2not-accessiblecurrent
qosBasicPortEntry
OBJECT-TYPE
The entry of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2.1not-accessiblecurrent
qosBasicPortIndex
OBJECT-TYPE
The port index of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2.1.1Integer32 (1..65535)read-onlycurrent
qosBasicPortTrust
OBJECT-TYPE
the port trust state Enabled: Traffic from this port will follow the global trust type. Disabled: Traffic will always go to the lowest priority queue.
1.3.6.1.4.1.10297.202.7000.6.2.2.1.2INTEGER {enable(1), disable(2)}read-writecurrent
rateLimit
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.3
ingressBandwidthControl
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.3.1
ingressBandwidthTable
OBJECT-TYPE
The table of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1not-accessiblecurrent
ingressBandwidthEntry
OBJECT-TYPE
The entry of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1not-accessiblecurrent
ingressBandwidthPortIndex
OBJECT-TYPE
The port index of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.1Integer32 (1..65535)read-onlycurrent
ingressBandwidthState
OBJECT-TYPE
enable/disable ingress bandwidth control
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.2INTEGER {enable(1), disable(2)}read-writecurrent
ingressBandwidthRate
OBJECT-TYPE
rate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.3Integer32 (16..1000000)read-writecurrent
egressBandwidthControl
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.3.2
egressBandwidthTable
OBJECT-TYPE
The table of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1not-accessiblecurrent
egressBandwidthEntry
OBJECT-TYPE
The entry of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1not-accessiblecurrent
egressBandwidthPortIndex
OBJECT-TYPE
The port index of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.1Integer32 (1..65535)read-onlycurrent
egressBandwidthState
OBJECT-TYPE
enable/disable egress bandwidth control
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.2INTEGER {enable(1), disable(2)}read-writecurrent
egressBandwidthRate
OBJECT-TYPE
rate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.3Integer32 (0..1000000)read-writecurrent
egressQueueBandwidthControl
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.6.3.3
egressqueueBandwidthTable
OBJECT-TYPE
The table of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1not-accessiblecurrent
egressqueueBandwidthEntry
OBJECT-TYPE
The entry of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1not-accessiblecurrent
egressqueueBandwidthPortIndex
OBJECT-TYPE
The port index of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.1Integer32 (1..65535)read-onlycurrent
egressqueueBandwidthQueueIndex
OBJECT-TYPE
The queue index of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.2Integer32 (1..8)read-onlycurrent
egressqueueBandwidthState
OBJECT-TYPE
enable/disable egress bandwidth contro
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.3INTEGER {enable(1), disable(2)}read-writecurrent
egressqueueBandwidthCir
OBJECT-TYPE
rate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.4Integer32 (16..1000000)read-writecurrent
management
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7
lldp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.1
lldpEnabled
OBJECT-TYPE
Enable/Disable LLDP protocol on this switch
1.3.6.1.4.1.10297.202.7000.7.1.1INTEGER {enable(1), disable(2)}read-writecurrent
lldpPduDisableAction
OBJECT-TYPE
Select LLDP PDU handling action to be filtered, bridging or flooded when LLDP is globally disabled.
1.3.6.1.4.1.10297.202.7000.7.1.2INTEGER {filtering(1), bridging(2), flooding(3)}read-writecurrent
lldpTransmissionInterval
OBJECT-TYPE
The interval at which frames are transmitted. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535. LLDP transmission delay should not be larger than LLDP transmission interval * 0.25
1.3.6.1.4.1.10297.202.7000.7.1.3Integer32 (5..32767)read-writecurrent
lldpHoldtimeMultiplier
OBJECT-TYPE
The multiplier on the transmit interval to assign to TTL. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535.
1.3.6.1.4.1.10297.202.7000.7.1.4Integer32 (2..10)read-writecurrent
lldpReinitializationDelay
OBJECT-TYPE
The delay before a re-initialization
1.3.6.1.4.1.10297.202.7000.7.1.5Integer32 (1..10)read-writecurrent
lldpTransmitDelay
OBJECT-TYPE
The delay after an LLDP frame is sent. LLDP transmission delay should not be larger than LLDP transmission interval * 0.25
1.3.6.1.4.1.10297.202.7000.7.1.6Integer32 (1..8191)read-writecurrent
lldpPortConfTable
OBJECT-TYPE
The table of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7not-accessiblecurrent
lldpPortConfEntry
OBJECT-TYPE
The entry of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7.1not-accessiblecurrent
lldpPortIndex
OBJECT-TYPE
The port index of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7.1.1Integer32 (1..65535)read-onlycurrent
lldpPortState
OBJECT-TYPE
the transmission state of LLDP port interface. Disable: Disable the transmission of LLDP PDUs. RX Only: Receive LLDP PDUs only. TX Only: Transmit LLDP PDUs only. TX And RX: Transmit and receive LLDP PDUs both.
1.3.6.1.4.1.10297.202.7000.7.1.7.1.2INTEGER {disable(1), rx-only(2), tx-only(3), rx-tx(4)}read-writecurrent
lldpPortOptionalTLVs
OBJECT-TYPE
The LLDP optional TLVs to be carried
1.3.6.1.4.1.10297.202.7000.7.1.7.1.3Bits {systemName(0), portDescription(1), systemDescription(2), systemCapability(3), ieee8023MAC-PHY(4), ieee8023LinkAggeration(5), ieee8023MaxFrameSize(6), managementAddress(7), ieee8021PVID(8)}read-writecurrent
lldpPortVlans
OBJECT-TYPE
The VLAN name ID to be carried. User can inpu vlan such as: 1-2, 100.
1.3.6.1.4.1.10297.202.7000.7.1.7.1.4DisplayStringread-writecurrent
localDevice
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.1.8
lldpLocalDeviceChassisidsubtype
OBJECT-TYPE
LLDP local device chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.1DisplayStringread-onlycurrent
lldpLocalDeviceChassisID
OBJECT-TYPE
LLDP local device chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.8.2DisplayStringread-onlycurrent
lldpLocalDeviceSystemName
OBJECT-TYPE
LLDP local device system name
1.3.6.1.4.1.10297.202.7000.7.1.8.3DisplayStringread-onlycurrent
lldpLocalDeviceSystemDescription
OBJECT-TYPE
LLDP local device system description
1.3.6.1.4.1.10297.202.7000.7.1.8.4DisplayStringread-onlycurrent
lldpLocalDeviceCapabilitiesSupported
OBJECT-TYPE
LLDP local device capabilities supported
1.3.6.1.4.1.10297.202.7000.7.1.8.5DisplayStringread-onlycurrent
lldpLocalDeviceCapabilitiesEnabled
OBJECT-TYPE
LLDP local device capabilities enabled
1.3.6.1.4.1.10297.202.7000.7.1.8.6DisplayStringread-onlycurrent
lldpLocalDevicePortIDsubtype
OBJECT-TYPE
LLDP local device port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.7DisplayStringread-onlycurrent
lldpLocalPortStatusTable
OBJECT-TYPE
The table of LLFP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8not-accessiblecurrent
lldpLocalPortStatusEntry
OBJECT-TYPE
The entry of LLFP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1not-accessiblecurrent
lldpLocalPortIndex
OBJECT-TYPE
The port index of LLDP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.1Integer32 (1..65535)read-onlycurrent
lldpLocalPortStatus
OBJECT-TYPE
LLDP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.2INTEGER {disable(1), rx-only(2), tx-only(3), rx-tx(4)}read-onlycurrent
lldpLocalPortChassisIDsubtype
OBJECT-TYPE
LLDP local port chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.3DisplayStringread-onlycurrent
lldpLocalPortChassisID
OBJECT-TYPE
LLDP local port chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.4DisplayStringread-onlycurrent
lldpLocalPortSystemname
OBJECT-TYPE
LLDP local port system name
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.5DisplayStringread-onlycurrent
lldpLocalPortSystemdescription
OBJECT-TYPE
LLDP local port system description
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.6DisplayStringread-onlycurrent
lldpLocalPortSupportedsystemcapabilities
OBJECT-TYPE
LLDP local port supported system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.7DisplayStringread-onlycurrent
lldpLocalPortEnablesystemcapabilities
OBJECT-TYPE
LLDP local port enable system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.8DisplayStringread-onlycurrent
lldpLocalPortIDsubtype
OBJECT-TYPE
LLDP local port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.9DisplayStringread-onlycurrent
lldpLocalPortID
OBJECT-TYPE
LLDP local port ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.10DisplayStringread-onlycurrent
lldpLocalPortDescription
OBJECT-TYPE
LLDP local port description
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.11DisplayStringread-onlycurrent
lldpLocalPortManagementAddress
OBJECT-TYPE
LLDP local port management address
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.12DisplayStringread-onlycurrent
lldpLocalPortAuto_negosupported
OBJECT-TYPE
LLDP local port auto-nego supported
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.13DisplayStringread-onlycurrent
lldpLocalPortAuto_negoenabled
OBJECT-TYPE
LLDP local port auto-nego enabled
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.14DisplayStringread-onlycurrent
lldpLocalPortAuto_negoAdvertisedCapabilities
OBJECT-TYPE
LLDP local port auto-nego advertised capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.15DisplayStringread-onlycurrent
lldpLocalPortOperationMAUtype
OBJECT-TYPE
LLDP local port operation MAU type
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.16DisplayStringread-onlycurrent
lldpLocalPortIeee8023MaxFrameSize
OBJECT-TYPE
LLDP local port IEEE 802.3 max frame size
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.17DisplayStringread-onlycurrent
lldpLocalPortAggregationCapability
OBJECT-TYPE
LLDP local port aggregation capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.18DisplayStringread-onlycurrent
lldpLocalPortAggregationStatus
OBJECT-TYPE
LLDP local port aggregation status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.19DisplayStringread-onlycurrent
lldpLocalPortAggregationPortID
OBJECT-TYPE
LLDP local port aggregation port ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.20DisplayStringread-onlycurrent
lldpLocalPortPvid
OBJECT-TYPE
LLDP local port PVID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.21DisplayStringread-onlycurrent
lldpLocalPortVlanName
OBJECT-TYPE
LLDP local port vlan name
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.22DisplayStringread-onlycurrent
remoteDevice
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.1.9
lldpremoteDeviceTable
OBJECT-TYPE
The table of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1not-accessiblecurrent
lldpremoteDeviceEntry
OBJECT-TYPE
The entry of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1not-accessiblecurrent
lldpremoteDeviceIndex
OBJECT-TYPE
The index of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.1Integer32 (1..65535)read-onlycurrent
lldpremoteDeviceLocalPort
OBJECT-TYPE
LLDP remote device local port
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.2DisplayStringread-onlycurrent
lldpremoteDeviceChassisIDsubtype
OBJECT-TYPE
LLDP remote device chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.3DisplayStringread-onlycurrent
lldpremoteDeviceChassisID
OBJECT-TYPE
LLDP remote device chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.4DisplayStringread-onlycurrent
lldpremoteDevicePortIDsubtype
OBJECT-TYPE
LLDP remote device port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.5DisplayStringread-onlycurrent
lldpremoteDevicePortID
OBJECT-TYPE
LLDP remote device port ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.6DisplayStringread-onlycurrent
lldpremoteDeviceSystemName
OBJECT-TYPE
LLDP remote device system name
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.7DisplayStringread-onlycurrent
lldpremoteDeviceTimetolive
OBJECT-TYPE
LLDP remote device time to live
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.8DisplayStringread-onlycurrent
lldpremoteDeviceEntryIndex
OBJECT-TYPE
LLDP remote device entry index
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.9DisplayStringread-onlycurrent
lldpremoteDevicePortDescription
OBJECT-TYPE
LDP remote device port description
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.10DisplayStringread-onlycurrent
lldpremoteDeviceSystemdescription
OBJECT-TYPE
LLDP remote device system description
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.11DisplayStringread-onlycurrent
lldpremoteDeviceSupportedsystemcapabilities
OBJECT-TYPE
LLDP remote device supported syste, capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.12DisplayStringread-onlycurrent
lldpremoteDeviceEnablesystemcapabilities
OBJECT-TYPE
LLDP remote device enable system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.13DisplayStringread-onlycurrent
lldpremoteDeviceManagementAddress
OBJECT-TYPE
LLDP remote device management address
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.14DisplayStringread-onlycurrent
lldpremoteDeviceAuto_negosupported
OBJECT-TYPE
LLDP remote device auto-nego supported
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.15DisplayStringread-onlycurrent
lldpremoteDeviceAuto_negoenabled
OBJECT-TYPE
LLDP remote device auto-nego enabled
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.16DisplayStringread-onlycurrent
lldpremoteDeviceAuto_negoAdvertisedCapabilities
OBJECT-TYPE
LLDP remote device auto-nego advertised capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.17DisplayStringread-onlycurrent
lldpremoteDeviceOperationMAUtype
OBJECT-TYPE
LLDP remote device operation MAU type
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.18DisplayStringread-onlycurrent
lldpremoteDeviceMdipowersupportportclass
OBJECT-TYPE
LLDP remote device PSE MDI power support class
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.19DisplayStringread-onlycurrent
lldpremoteDevicePsemdipowersupport
OBJECT-TYPE
LLDP remote device PSE MDI power support
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.20DisplayStringread-onlycurrent
lldpremoteDevicePsemdipowerstatus
OBJECT-TYPE
LLDP remote device PSE MDI power status
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.21DisplayStringread-onlycurrent
lldpremoteDevicePsepowerpaircontrolability
OBJECT-TYPE
LLDP remote device PSE power pair control ability
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.22DisplayStringread-onlycurrent
lldpremoteDevicePsepowerpair
OBJECT-TYPE
LLDP remote device PSE power pair
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.23DisplayStringread-onlycurrent
lldpremoteDevicePsepowerclass
OBJECT-TYPE
LLDP remote device PSE power class
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.24DisplayStringread-onlycurrent
lldpremoteDeviceIeee8023MaxFrameSize
OBJECT-TYPE
LLDP remote device IEEE 802.3 Max frame size
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.25DisplayStringread-onlycurrent
lldpremoteDeviceAggregationCapability
OBJECT-TYPE
LLDP remote device aggregation capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.26DisplayStringread-onlycurrent
lldpremoteDeviceAggregationStatus
OBJECT-TYPE
LLDP remote device aggregation status
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.27DisplayStringread-onlycurrent
lldpremoteDeviceAggregationPortID
OBJECT-TYPE
LLDP remote device aggregation Port ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.28DisplayStringread-onlycurrent
lldpremoteDevicePvid
OBJECT-TYPE
LLDP remote device PVID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.29DisplayStringread-onlycurrent
lldpremoteDeviceVlanName
OBJECT-TYPE
LLDP remote device VLAN name
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.30DisplayStringread-onlycurrent
lldpremoteDeviceRowStatus
OBJECT-TYPE
LLDP remote device device rowstatus
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.31INTEGER {active(1), desroty(6)}read-writecurrent
lldpOverloadingTable
OBJECT-TYPE
The table of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10not-accessiblecurrent
lldpOverloadingEntry
OBJECT-TYPE
The entry of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10.1not-accessiblecurrent
lldpOverloadingPortIndex
OBJECT-TYPE
The port index of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10.1.1Integer32 (1..65535)read-onlycurrent
lldpOverloadingTotal
OBJECT-TYPE
LLDP overloading total
1.3.6.1.4.1.10297.202.7000.7.1.10.1.2Integer32read-onlycurrent
lldpOverloadingLeftToSend
OBJECT-TYPE
LLDP overloading left to send
1.3.6.1.4.1.10297.202.7000.7.1.10.1.3Integer32read-onlycurrent
lldpOverloadingStatus
OBJECT-TYPE
LLDP overloading status
1.3.6.1.4.1.10297.202.7000.7.1.10.1.4DisplayStringread-onlycurrent
lldpOverloadingMandatoryTLVs
OBJECT-TYPE
LLDP overloading mandatory TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.5DisplayStringread-onlycurrent
lldpOverloadingIeee8023TLVs
OBJECT-TYPE
LLDP overloading IEEE 802.3 TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.6DisplayStringread-onlycurrent
lldpOverloadingOptionalTLVs
OBJECT-TYPE
LLDP overloading optional TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.7DisplayStringread-onlycurrent
lldpOverloadingIeee8021TLVs
OBJECT-TYPE
LLDP overloading IEEE 802.1 TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.8DisplayStringread-onlycurrent
snmp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.2
snmpState
OBJECT-TYPE
SNMP golbal setting
1.3.6.1.4.1.10297.202.7000.7.2.1INTEGER {enable(1), disable(2)}read-writecurrent
snmpCommunityTable
OBJECT-TYPE
The table of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2not-accessiblecurrent
snmpCommunityEntry
OBJECT-TYPE
The entry of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1not-accessiblecurrent
snmpCommunityIndex
OBJECT-TYPE
The index of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1.1Integer32 (1..8)read-onlycurrent
snmpCommunityString
OBJECT-TYPE
The name of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1.2DisplayStringread-writecurrent
snmpCommunityAccessRight
OBJECT-TYPE
SNMP access mode
1.3.6.1.4.1.10297.202.7000.7.2.2.1.3INTEGER {ro(1), rw(2)}read-writecurrent
snmpCommunityRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.2.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
snmpTrapHostTable
OBJECT-TYPE
The table of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3not-accessiblecurrent
snmpTrapHostEntry
OBJECT-TYPE
The entry of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1not-accessiblecurrent
snmpTrapHostIndex
OBJECT-TYPE
The index of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.1Integer32 (0..8)read-onlycurrent
snmpTrapHostIpaddress
OBJECT-TYPE
The ipaddress or hostname of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.2DisplayStringread-writecurrent
snmpTrapHostCommunityName
OBJECT-TYPE
The community name of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.3DisplayStringread-writecurrent
snmpTrapHostVersion
OBJECT-TYPE
The SNMP version of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.4INTEGER {v1(1), v2cTrap(2), v2cInform(3), v3Trap(4), v3Inform(5)}read-writecurrent
snmpTrapHostRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.3.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
snmpv3UserTable
OBJECT-TYPE
The table of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4not-accessiblecurrent
snmpv3UserEntry
OBJECT-TYPE
The entry of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1not-accessiblecurrent
snmpv3UserIndex
OBJECT-TYPE
The index of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.1Integer32 (0..8)read-onlycurrent
snmpv3UserName
OBJECT-TYPE
The name of SNMPv3 user. Please input more than 8 characters.
1.3.6.1.4.1.10297.202.7000.7.2.4.1.2DisplayStringread-writecurrent
snmpv3UserAccessRight
OBJECT-TYPE
The access right of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.3INTEGER {readonly(1), readwrite(2)}read-writecurrent
snmpv3UserAuthProtocol
OBJECT-TYPE
The authentication protocol of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.4INTEGER {none(1), md5(2), sha(3)}read-writecurrent
snmpv3UserAuthPassword
OBJECT-TYPE
The authentication password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.'
1.3.6.1.4.1.10297.202.7000.7.2.4.1.5DisplayStringread-writecurrent
snmpv3UserPrivProtocol
OBJECT-TYPE
The priviledge protocol of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.6INTEGER {none(1), des(2), aes(3)}read-writecurrent
snmpv3UserPrivPassword
OBJECT-TYPE
The priviledge password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.'
1.3.6.1.4.1.10297.202.7000.7.2.4.1.7DisplayStringread-writecurrent
snmpv3UserRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.4.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
snmpv3EngineID
OBJECT-TYPE
The snmpv3 engine ID
1.3.6.1.4.1.10297.202.7000.7.2.5DisplayStringread-onlycurrent
poe
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.3
poeSystemSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.3.1
poeFwVersion
OBJECT-TYPE
The PoE firmware version
1.3.6.1.4.1.10297.202.7000.7.3.1.1DisplayStringread-onlycurrent
poeMaxPowerAvailable
OBJECT-TYPE
The maximum power available in PoE. actual maximun power value is different according Switch Model. ex : EKI-7710G maximun poe power value is 120W. EKI-7712G maximun poe power value is 240W.
1.3.6.1.4.1.10297.202.7000.7.3.1.2INTEGER (0..720)read-writecurrent
poeActualPowerConsumption
OBJECT-TYPE
The actual power consumption in PoE
1.3.6.1.4.1.10297.202.7000.7.3.1.3INTEGERread-onlycurrent
poeOverLoadDisconnect
OBJECT-TYPE
The overload disconnect mode in PoE
1.3.6.1.4.1.10297.202.7000.7.3.1.4INTEGER {overload-port-first(1), port-based-priority(2)}read-writecurrent
poePortSettingTable
OBJECT-TYPE
The table of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2not-accessiblecurrent
poePortSettingEntry
OBJECT-TYPE
The table of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2.1not-accessiblecurrent
poePortIndex
OBJECT-TYPE
The index of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2.1.1Integer32 (1..65535)read-onlycurrent
poePortState
OBJECT-TYPE
The state of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.2INTEGER {enable(1), disable(2)}read-writecurrent
poePortLegacy
OBJECT-TYPE
The legacy of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.3INTEGER {enable(1), disable(2)}read-writecurrent
poePortPowerLimitClass
OBJECT-TYPE
The power limit form classification of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
poePortPriority
OBJECT-TYPE
The priority of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.5INTEGER {low(1), medium(2), high(3), critical(4)}read-writecurrent
poePortPowerLimit
OBJECT-TYPE
The power limit of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.6Integer32 (0..30000)read-writecurrent
poePortStatusTable
OBJECT-TYPE
The table of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3not-accessiblecurrent
poePortStatusEntry
OBJECT-TYPE
The table of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3.1not-accessiblecurrent
poePortStatusIndex
OBJECT-TYPE
The index of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3.1.1Integer32 (1..65535)read-onlycurrent
poePortCurrent
OBJECT-TYPE
The current of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.2DisplayStringread-onlycurrent
poePortVoltage
OBJECT-TYPE
The voltage of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.3DisplayStringread-onlycurrent
poePortPower
OBJECT-TYPE
The power of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.4DisplayStringread-onlycurrent
poePortTemp
OBJECT-TYPE
The temperature of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.5DisplayStringread-onlycurrent
tcpModbus
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.4
tcpModbusState
OBJECT-TYPE
The state of TCP Modbus
1.3.6.1.4.1.10297.202.7000.7.4.1INTEGER {enable(1), disable(2)}read-writecurrent
tcpModbusTimeout
OBJECT-TYPE
The time out of TCP Modbus
1.3.6.1.4.1.10297.202.7000.7.4.2Integer32 (1..32767)read-writecurrent
dhcpServer
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.5
dhcpServerState
OBJECT-TYPE
The state of DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.1INTEGER {enable(1), disable(2)}read-writecurrent
dhcpServerGlobalSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.5.2
dhcpServerLeaseTime
OBJECT-TYPE
The lease time of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.1INTEGER (60..864000)read-writecurrent
dhcpServerLowIP
OBJECT-TYPE
The low IP address of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.2IpAddressread-writecurrent
dhcpServerHighIP
OBJECT-TYPE
The high IP address of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.3IpAddressread-writecurrent
dhcpServerSubmask
OBJECT-TYPE
The subnet mask of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.4IpAddressread-writecurrent
dhcpServerGateway
OBJECT-TYPE
The gateway of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.5IpAddressread-writecurrent
dhcpServerDNS
OBJECT-TYPE
The DNS of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.6IpAddressread-writecurrent
dhcpServerStatus
OBJECT-TYPE
If user set golbal setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.2.7INTEGER {active(1), notInService(2)}read-writecurrent
dhcpServerClearIpPool
OBJECT-TYPE
Clear IP pool in DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.2.8INTEGER {clear(1)}read-writecurrent
dhcpServerPortTable
OBJECT-TYPE
The table of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3not-accessiblecurrent
dhcpServerPortEntry
OBJECT-TYPE
The entry of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3.1not-accessiblecurrent
dhcpServerPortIndex
OBJECT-TYPE
The index of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3.1.1Integer32 (1..65535)read-onlycurrent
dhcpServerPortLowIP
OBJECT-TYPE
The low IP address of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.2IpAddressread-writecurrent
dhcpServerPortHighIP
OBJECT-TYPE
The high IP address of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.3IpAddressread-writecurrent
dhcpServerPortMask
OBJECT-TYPE
The subnet mask of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.4IpAddressread-writecurrent
dhcpServerPortGW
OBJECT-TYPE
The gateway of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.5IpAddressread-writecurrent
dhcpServerPortDNS
OBJECT-TYPE
The DNS of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.6IpAddressread-writecurrent
dhcpServerPortStatus
OBJECT-TYPE
If user set port setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.3.1.7INTEGER {active(1), notInService(2)}read-writecurrent
dhcpServerPortClear
OBJECT-TYPE
Clear IP poll on DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.8INTEGER {nothing(0), clear(1)}read-writecurrent
dhcpServerOpt82Table
OBJECT-TYPE
The table of DHCP option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4not-accessiblecurrent
dhcpServerOpt82Entry
OBJECT-TYPE
The entry of DHCP option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4.1not-accessiblecurrent
dhcpServerOpt82Index
OBJECT-TYPE
The index of DHCP server option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4.1.1Integer32 (1..2)read-onlycurrent
dhcpServerOpt82CircuitIDFormat
OBJECT-TYPE
The circuit ID format of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.2INTEGER {string(1), hex(2)}read-writecurrent
dhcpServerOpt82CircuitID
OBJECT-TYPE
The circuit ID of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.3DisplayStringread-writecurrent
dhcpServerOpt82RemoteIDFormat
OBJECT-TYPE
The remote ID format of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.4INTEGER {string(1), hex(2)}read-writecurrent
dhcpServerOpt82RemoteID
OBJECT-TYPE
The remote ID of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.5DisplayStringread-writecurrent
dhcpServerOpt82LowIP
OBJECT-TYPE
The low IP address of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.6IpAddressread-writecurrent
dhcpServerOpt82HighIP
OBJECT-TYPE
The high IP address of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.7IpAddressread-writecurrent
dhcpServerOpt82Mask
OBJECT-TYPE
The subnet mask of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.8IpAddressread-writecurrent
dhcpServerOpt82GW
OBJECT-TYPE
The gateway of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.9IpAddressread-writecurrent
dhcpServerOpt82DNS
OBJECT-TYPE
The DNS of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.10IpAddressread-writecurrent
dhcpServerOpt82Status
OBJECT-TYPE
If user set option82 setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.4.1.11INTEGER {active(1), notInService(2)}read-writecurrent
dhcpServerOpt82Clear
OBJECT-TYPE
Clear IP poll on DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.12INTEGER {nothing(0), clear(1)}read-writecurrent
dhcpServerLeaseTable
OBJECT-TYPE
The table of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5not-accessiblecurrent
dhcpServerLeaseEntry
OBJECT-TYPE
The entry of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1not-accessiblecurrent
dhcpServerLeaseIndex
OBJECT-TYPE
The index of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.1Integer32 (0..1000)read-onlycurrent
dhcpServerLeaseIp
OBJECT-TYPE
The IP address of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.2DisplayStringread-onlycurrent
dhcpServerLeaseClientMac
OBJECT-TYPE
The client MAC of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.3DisplayStringread-onlycurrent
dhcpServerLeaseStartTime
OBJECT-TYPE
The start time of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.4DisplayStringread-onlycurrent
dhcpServerLeaseEndTime
OBJECT-TYPE
The end time of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.5DisplayStringread-onlycurrent
dhcpServerLeaseType
OBJECT-TYPE
The type of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.6DisplayStringread-onlycurrent
dhcpServerRestart
OBJECT-TYPE
Restart DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.6INTEGER {restart(1)}read-writecurrent
dhcpServerVlanTable
OBJECT-TYPE
The table of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7not-accessiblecurrent
dhcpServerVlanEntry
OBJECT-TYPE
The entry of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1not-accessiblecurrent
dhcpServerVlanIndex
OBJECT-TYPE
The index of DHCP server VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1.1Integer32 (1..2)read-onlycurrent
dhcpServerVlanId
OBJECT-TYPE
The VLAN ID of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1.2Integer32 (1..4094)read-writecurrent
dhcpServerVlanLowIP
OBJECT-TYPE
The low IP address of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.3IpAddressread-writecurrent
dhcpServerVlanHighIP
OBJECT-TYPE
The high IP address of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.4IpAddressread-writecurrent
dhcpServerVlanMask
OBJECT-TYPE
The subnet mask of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.5IpAddressread-writecurrent
dhcpServerVlanGW
OBJECT-TYPE
The gateway of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.6IpAddressread-writecurrent
dhcpServerVlanDNS
OBJECT-TYPE
The DNS of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.7IpAddressread-writecurrent
dhcpServerVlanStatus
OBJECT-TYPE
If user set VLAN setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.7.1.8INTEGER {active(1), notInService(2)}read-writecurrent
dhcpServerVlanClear
OBJECT-TYPE
Clear IP poll on DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.9INTEGER {nothing(0), clear(1)}read-writecurrent
dhcpServerClientMacTable
OBJECT-TYPE
The table of DHCP client mac setting
1.3.6.1.4.1.10297.202.7000.7.5.8not-accessiblecurrent
dhcpServerClientMacEntry
OBJECT-TYPE
The entry of DHCP server client mac setting
1.3.6.1.4.1.10297.202.7000.7.5.8.1not-accessiblecurrent
dhcpServerClientMacEntryID
OBJECT-TYPE
The index of DHCP server client mac entry
1.3.6.1.4.1.10297.202.7000.7.5.8.1.1Integer32 (1..100)read-writecurrent
dhcpServerClientMacEntryMac
OBJECT-TYPE
The MAC address of DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.2DisplayStringread-writecurrent
dhcpServerClientMacEntryIP
OBJECT-TYPE
The IP address of DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.3IpAddressread-writecurrent
dhcpServerClientMacEntryMask
OBJECT-TYPE
The subnet mask of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.4IpAddressread-writecurrent
dhcpServerClientMacEntryGW
OBJECT-TYPE
The gateway of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.5IpAddressread-writecurrent
dhcpServerClientMacEntryDNS
OBJECT-TYPE
The DNS of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.6IpAddressread-writecurrent
dhcpServerClientMacEntryRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.7INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
smtpClient
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.6
smtpActiveProfile
OBJECT-TYPE
The active profile of SMTP client
1.3.6.1.4.1.10297.202.7000.7.6.1INTEGER {one(1), two(2), none(3)}read-writecurrent
smtpProfileTable
OBJECT-TYPE
The table of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2not-accessiblecurrent
smtpProfileEntry
OBJECT-TYPE
The entry of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2.1not-accessiblecurrent
smtpProfileIndex
OBJECT-TYPE
The index of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2.1.1Integer32 (1..2)read-onlycurrent
smtpServerIp
OBJECT-TYPE
The SMTP server IP
1.3.6.1.4.1.10297.202.7000.7.6.2.1.2DisplayStringread-writecurrent
smtpServerPort
OBJECT-TYPE
The SMTP server port
1.3.6.1.4.1.10297.202.7000.7.6.2.1.3Integer32read-onlycurrent
smtpSenderMail
OBJECT-TYPE
The SMTP sender mail
1.3.6.1.4.1.10297.202.7000.7.6.2.1.4DisplayStringread-writecurrent
smtpTargetMail1
OBJECT-TYPE
The SMTP target mail 1
1.3.6.1.4.1.10297.202.7000.7.6.2.1.5DisplayStringread-writecurrent
smtpTargetMail2
OBJECT-TYPE
The SMTP target mail 2
1.3.6.1.4.1.10297.202.7000.7.6.2.1.6DisplayStringread-writecurrent
smtpTargetMail3
OBJECT-TYPE
The SMTP target mail 3
1.3.6.1.4.1.10297.202.7000.7.6.2.1.7DisplayStringread-writecurrent
smtpTargetMail4
OBJECT-TYPE
The SMTP target mail 4
1.3.6.1.4.1.10297.202.7000.7.6.2.1.8DisplayStringread-writecurrent
smtpTargetMail5
OBJECT-TYPE
The SMTP target mail 5
1.3.6.1.4.1.10297.202.7000.7.6.2.1.9DisplayStringread-writecurrent
smtpTargetMail6
OBJECT-TYPE
The SMTP target mail 6
1.3.6.1.4.1.10297.202.7000.7.6.2.1.10DisplayStringread-writecurrent
smtpTargetMail7
OBJECT-TYPE
The SMTP target mail 7
1.3.6.1.4.1.10297.202.7000.7.6.2.1.11DisplayStringread-writecurrent
smtpTargetMail8
OBJECT-TYPE
The SMTP target mail 8
1.3.6.1.4.1.10297.202.7000.7.6.2.1.12DisplayStringread-writecurrent
rmon
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.7
rmonStatisticsTable
OBJECT-TYPE
The table of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1not-accessiblecurrent
rmonStatisticsEntry
OBJECT-TYPE
The entry of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1not-accessiblecurrent
rmonStatisticsIndex
OBJECT-TYPE
The index of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.1Integer32 (1..65535)read-writecurrent
rmonStatisticsPort
OBJECT-TYPE
The port number of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.2Integer32read-writecurrent
rmonStatisticsDropEvents
OBJECT-TYPE
The drop events of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.3Counter32read-onlycurrent
rmonStatisticsOctets
OBJECT-TYPE
The octets of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.4Counter32read-onlycurrent
rmonStatisticsPackets
OBJECT-TYPE
The packets of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.5Counter32read-onlycurrent
rmonStatisticsBroadcast
OBJECT-TYPE
The broadcast of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.6Counter32read-onlycurrent
rmonStatisticsMulticast
OBJECT-TYPE
The multicast of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.7Counter32read-onlycurrent
rmonStatisticsOwner
OBJECT-TYPE
The owner of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.8DisplayStringread-writecurrent
rmonStatisticsRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.1.1.9INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
rmonHistoryTable
OBJECT-TYPE
The table of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2not-accessiblecurrent
rmonHistoryEntry
OBJECT-TYPE
The entry of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1not-accessiblecurrent
rmonHistoryIndex
OBJECT-TYPE
The index of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.1Integer32 (1..65535)read-writecurrent
rmonHistoryPort
OBJECT-TYPE
The port number of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.2Integer32read-writecurrent
rmonHistoryBucketsRequest
OBJECT-TYPE
The buckets requested of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.3Integer32 (1..50)read-writecurrent
rmonHistoryInterval
OBJECT-TYPE
The index of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.5Integer32 (1..3600)read-writecurrent
rmonHistoryOwner
OBJECT-TYPE
The port number of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.6DisplayStringread-writecurrent
rmonHistoryRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.2.1.7INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
rmonAlarmTable
OBJECT-TYPE
The table of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3not-accessiblecurrent
rmonAlarmEntry
OBJECT-TYPE
The entry of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1not-accessiblecurrent
rmonAlarmIndex
OBJECT-TYPE
The index of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.1Integer32 (1..65535)read-writecurrent
rmonAlarmInterval
OBJECT-TYPE
The interval of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.2Integer32 (1..2147483647)read-writecurrent
rmonAlarmVariable
OBJECT-TYPE
The variable of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.3DisplayStringread-writecurrent
rmonAlarmSampleType
OBJECT-TYPE
The sample type of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.4INTEGER {absolute(1), delta(2)}read-writecurrent
rmonAlarmRisingThreshold
OBJECT-TYPE
The rising threshold of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.5Integer32 (1..2147483647)read-writecurrent
rmonAlarmFallingThreshold
OBJECT-TYPE
The falling threshold of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.6Integer32 (1..2147483647)read-writecurrent
rmonAlarmRisingEventIndex
OBJECT-TYPE
The rising event index of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.7Integer32 (1..65535)read-writecurrent
rmonAlarmFallingEventIndex
OBJECT-TYPE
The falling event indx of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.8Integer32 (1..65535)read-writecurrent
rmonAlarmOwner
OBJECT-TYPE
The owner of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.9DisplayStringread-writecurrent
rmonAlarmRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.3.1.10INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
rmonEventTable
OBJECT-TYPE
The table of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4not-accessiblecurrent
rmonEventEntry
OBJECT-TYPE
The entry of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1not-accessiblecurrent
rmonEventIndex
OBJECT-TYPE
The index of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.1Integer32 (1..65535)read-writecurrent
rmonEventDescription
OBJECT-TYPE
The description of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.2DisplayStringread-writecurrent
rmonEventType
OBJECT-TYPE
The type of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.3INTEGER {none(1), log(2), trap(3), logTrap(4)}read-writecurrent
rmonEventCommunity
OBJECT-TYPE
The community of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.4DisplayStringread-writecurrent
rmonEventOwner
OBJECT-TYPE
The owner of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.5DisplayStringread-writecurrent
rmonEventRowStatus
OBJECT-TYPE
User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.4.1.7INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-createcurrent
ntp
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.7.8
ntpServer
OBJECT-TYPE
enable/disable NTP server.
1.3.6.1.4.1.10297.202.7000.7.8.1INTEGER {enable(1), disable(2)}read-writecurrent
ntpManualTime
OBJECT-TYPE
enable/disable NTP manual time.
1.3.6.1.4.1.10297.202.7000.7.8.2INTEGER {enable(1), disable(2)}read-writecurrent
ntpServerTable
OBJECT-TYPE
The table of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3not-accessiblecurrent
ntpServerEntry
OBJECT-TYPE
The entry of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1not-accessiblecurrent
ntpServerIndex
OBJECT-TYPE
The index of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1.1Integer32 (1..10)read-onlycurrent
ntpServerIp
OBJECT-TYPE
The ip address of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1.2IpAddressread-writecurrent
diagnostics
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8
copperTest
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.1
portNumber
OBJECT-TYPE
The port ID for copper test
1.3.6.1.4.1.10297.202.7000.8.1.1INTEGERread-writecurrent
copperTestAction
OBJECT-TYPE
Copper test action
1.3.6.1.4.1.10297.202.7000.8.1.2INTEGER {copperTest(1)}read-writecurrent
copperTestResult
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.1.3
resultPort
OBJECT-TYPE
The copper test port ID
1.3.6.1.4.1.10297.202.7000.8.1.3.1INTEGERread-onlycurrent
channelA
OBJECT-TYPE
The copper test result for channel A
1.3.6.1.4.1.10297.202.7000.8.1.3.2DisplayStringread-onlycurrent
cableLengthA
OBJECT-TYPE
The copper test result for cable length A
1.3.6.1.4.1.10297.202.7000.8.1.3.3DisplayStringread-onlycurrent
channelB
OBJECT-TYPE
The copper test result for channel B
1.3.6.1.4.1.10297.202.7000.8.1.3.4DisplayStringread-onlycurrent
cableLengthB
OBJECT-TYPE
The copper test result forcable length B
1.3.6.1.4.1.10297.202.7000.8.1.3.5DisplayStringread-onlycurrent
channelC
OBJECT-TYPE
The copper test result for channel C
1.3.6.1.4.1.10297.202.7000.8.1.3.6DisplayStringread-onlycurrent
cableLengthC
OBJECT-TYPE
The copper test result for cable length C
1.3.6.1.4.1.10297.202.7000.8.1.3.7DisplayStringread-onlycurrent
channelD
OBJECT-TYPE
The copper test result for channel D
1.3.6.1.4.1.10297.202.7000.8.1.3.8DisplayStringread-onlycurrent
cableLengthD
OBJECT-TYPE
The copper test result for cable length D
1.3.6.1.4.1.10297.202.7000.8.1.3.9DisplayStringread-onlycurrent
channelRx
OBJECT-TYPE
The copper test result for channel Rx
1.3.6.1.4.1.10297.202.7000.8.1.3.10DisplayStringread-onlycurrent
cableLengthRx
OBJECT-TYPE
The copper test result for cable length Rx
1.3.6.1.4.1.10297.202.7000.8.1.3.11DisplayStringread-onlycurrent
channelTx
OBJECT-TYPE
The copper test result for channel Tx
1.3.6.1.4.1.10297.202.7000.8.1.3.12DisplayStringread-onlycurrent
cableLengthTx
OBJECT-TYPE
The copper test result for cable length Tx
1.3.6.1.4.1.10297.202.7000.8.1.3.13DisplayStringread-onlycurrent
pingTest
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.2
pingIPAddress
OBJECT-TYPE
The IP address or hostname of ping target
1.3.6.1.4.1.10297.202.7000.8.2.1DisplayStringread-writecurrent
pingCount
OBJECT-TYPE
How many times to send ping request packets
1.3.6.1.4.1.10297.202.7000.8.2.2Integer32 (1..5)read-writecurrent
pingInterval
OBJECT-TYPE
Time interval between each ping request packets
1.3.6.1.4.1.10297.202.7000.8.2.3Integer32 (1..5)read-writecurrent
pingSize
OBJECT-TYPE
The size of ping packet
1.3.6.1.4.1.10297.202.7000.8.2.4Integer32 (8..5120)read-writecurrent
pingAction
OBJECT-TYPE
The ping action
1.3.6.1.4.1.10297.202.7000.8.2.5INTEGER {ping(1)}read-writecurrent
pingResult
OBJECT-TYPE
After ping finished, results will show in this OID
1.3.6.1.4.1.10297.202.7000.8.2.6DisplayStringread-onlycurrent
ipv6pingTest
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.3
pingIPv6Address
OBJECT-TYPE
The IPv6 address of ping target
1.3.6.1.4.1.10297.202.7000.8.3.1DisplayStringread-writecurrent
pingIPv6Count
OBJECT-TYPE
How many times to send ping request packet
1.3.6.1.4.1.10297.202.7000.8.3.2Integer32 (1..5)read-writecurrent
pingIPv6Interval
OBJECT-TYPE
Time interval between each ping request packet
1.3.6.1.4.1.10297.202.7000.8.3.3Integer32 (1..5)read-writecurrent
pingIPv6Size
OBJECT-TYPE
The size of ping packet
1.3.6.1.4.1.10297.202.7000.8.3.4Integer32 (8..5120)read-writecurrent
pingIPv6Action
OBJECT-TYPE
The IPv6 ping action
1.3.6.1.4.1.10297.202.7000.8.3.5INTEGER {ping(1)}read-writecurrent
pingIPv6Result
OBJECT-TYPE
After ping finished, results will show in this field
1.3.6.1.4.1.10297.202.7000.8.3.6DisplayStringread-onlycurrent
loggingSetting
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.4
loggingService
OBJECT-TYPE
Enable/Disable logging system
1.3.6.1.4.1.10297.202.7000.8.4.1INTEGER {enable(1), disable(2)}read-writecurrent
localLoggingTable
OBJECT-TYPE
The table of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2not-accessiblecurrent
localLoggingEntry
OBJECT-TYPE
The entry of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2.1not-accessiblecurrent
localLoggingIndex
OBJECT-TYPE
The index of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2.1.1Integer32 (1..3)read-onlycurrent
bufferedtarget
OBJECT-TYPE
The target to store log message Buffered: Store log messages in device buffer. File: Store log message in file. Console: Show the log message on console.
1.3.6.1.4.1.10297.202.7000.8.4.2.1.2INTEGER {buffered(1), console(2), file(3)}read-onlycurrent
localLoggingStatus
OBJECT-TYPE
Enable/Disable status the logging system
1.3.6.1.4.1.10297.202.7000.8.4.2.1.3INTEGER {enable(1), disable(2)}read-onlycurrent
localLoggingSeverity
OBJECT-TYPE
Severity of log message which will be stored
1.3.6.1.4.1.10297.202.7000.8.4.2.1.4Bits {emerg(0), alert(1), crit(2), error(3), warning(4), notice(5), info(6), debug(7)}read-writecurrent
remoteloggingTable
OBJECT-TYPE
The table of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3not-accessiblecurrent
remoteloggingEntry
OBJECT-TYPE
The entry of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3.1not-accessiblecurrent
remoteloggingIndex
OBJECT-TYPE
The index of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3.1.1Integer32 (1..8)read-onlycurrent
remoteloggingAddress
OBJECT-TYPE
The IP address of remote log server
1.3.6.1.4.1.10297.202.7000.8.4.3.1.2IpAddressread-writecurrent
remoteloggingPort
OBJECT-TYPE
The port number of remote log server
1.3.6.1.4.1.10297.202.7000.8.4.3.1.3Integer32 (1..65535)read-writecurrent
remoteloggingSeverity
OBJECT-TYPE
The severity of log messages which will be sent
1.3.6.1.4.1.10297.202.7000.8.4.3.1.4Bits {emerg(0), alert(1), crit(2), error(3), warning(4), notice(5), info(6), debug(7)}read-writecurrent
remoteloggingFacility
OBJECT-TYPE
The facility of log messages which will be sent
1.3.6.1.4.1.10297.202.7000.8.4.3.1.5INTEGER {local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)}read-writecurrent
remoteloggingRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.8.4.3.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
factoryDefault
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.5
factoryDefaultAction
OBJECT-TYPE
user to restore switch to factory default
1.3.6.1.4.1.10297.202.7000.8.5.1INTEGER {factoryDefault(1)}read-writecurrent
factoryDefaultKeepFlag
OBJECT-TYPE
Keep setting when switch is restore to factory default.
1.3.6.1.4.1.10297.202.7000.8.5.2Bits {vlan(1), ipaddress(2), useraccount(3)}read-writecurrent
reboot
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.6
rebootAction
OBJECT-TYPE
user to reboot the switch
1.3.6.1.4.1.10297.202.7000.8.6.1INTEGER {reboot(1)}read-writecurrent
dhcpAutoProvision
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.7
dhcpAutoProvisionEnable
OBJECT-TYPE
The status of DHCP auto provision
1.3.6.1.4.1.10297.202.7000.8.7.1INTEGER {enable(1), disable(2)}read-writecurrent
ledIndication
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.8.8
ledAlarmState
OBJECT-TYPE
Enable/Disable LED alarm
1.3.6.1.4.1.10297.202.7000.8.8.1INTEGER {enable(1), disable(2)}read-writecurrent
ledPowerFailureEvent
OBJECT-TYPE
Enable/Disable LED power failure event
1.3.6.1.4.1.10297.202.7000.8.8.2INTEGER {enable(1), disable(2)}read-writecurrent
ledFiberLinkdownEvent
OBJECT-TYPE
Enable/Disable LED fiber port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.3INTEGER {enable(1), disable(2)}read-writecurrent
ledPortLinkdownEvent
OBJECT-TYPE
Enable/Disable LED port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.4INTEGER {enable(1), disable(2)}read-writecurrent
ledPortLinkdownEventPort
OBJECT-TYPE
The member ports of LED port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.5Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29), port31(30), port32(31)}read-writecurrent
ledEventInfoTable
OBJECT-TYPE
The table of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6not-accessiblecurrent
ledEventInfoEntry
OBJECT-TYPE
The entry of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1not-accessiblecurrent
ledEventIndex
OBJECT-TYPE
The index of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.1Integer32 (1..3)read-onlycurrent
ledType
OBJECT-TYPE
The type of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.2DisplayStringread-onlycurrent
ledEvent
OBJECT-TYPE
The event of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.3DisplayStringread-onlycurrent
ledState
OBJECT-TYPE
The state of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.4DisplayStringread-onlycurrent
ledErrorTimes
OBJECT-TYPE
The error times of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.5Integer32 (0..65535)read-onlycurrent
maintenance
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9
backupManager
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.1
backupMethod
OBJECT-TYPE
The method of backup file
1.3.6.1.4.1.10297.202.7000.9.1.1INTEGER {tftp(1)}read-writecurrent
backupServerIP
OBJECT-TYPE
The IP address of the TFTP server
1.3.6.1.4.1.10297.202.7000.9.1.2DisplayStringread-writecurrent
backupType
OBJECT-TYPE
The backup configuration type
1.3.6.1.4.1.10297.202.7000.9.1.3INTEGER {image(1), startupConfig(2), runningConfig(3), flashlog(5), bufferlog(6)}read-writecurrent
backupImage
OBJECT-TYPE
The backup firmware image
1.3.6.1.4.1.10297.202.7000.9.1.4INTEGER {partition0(1), partition1(2)}read-writecurrent
backupAction
OBJECT-TYPE
The backup action
1.3.6.1.4.1.10297.202.7000.9.1.5INTEGER {backup(1)}read-writecurrent
upgradeManager
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.2
upgradeMethod
OBJECT-TYPE
The upgrade file method
1.3.6.1.4.1.10297.202.7000.9.2.1INTEGER {tftp(1)}read-writecurrent
upgradeServerIP
OBJECT-TYPE
The server IP address
1.3.6.1.4.1.10297.202.7000.9.2.2DisplayStringread-writecurrent
upgradeFileName
OBJECT-TYPE
The upgrade file name
1.3.6.1.4.1.10297.202.7000.9.2.3DisplayStringread-writecurrent
upgradeType
OBJECT-TYPE
The upgrade type
1.3.6.1.4.1.10297.202.7000.9.2.4INTEGER {image(1), startupConfig(2), runningConfig(3)}read-writecurrent
upgradeImage
OBJECT-TYPE
The uprade firmware image
1.3.6.1.4.1.10297.202.7000.9.2.5INTEGER {active(1), backup(2)}read-writecurrent
upgradeAction
OBJECT-TYPE
The upgrade action
1.3.6.1.4.1.10297.202.7000.9.2.6INTEGER {upgrade(1)}read-writecurrent
upgradeStatus
OBJECT-TYPE
The upgrade status
1.3.6.1.4.1.10297.202.7000.9.2.7INTEGER {on-going(1), done(2)}read-onlycurrent
dualImage
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.3
activeImage
OBJECT-TYPE
The active image
1.3.6.1.4.1.10297.202.7000.9.3.1INTEGER {image1(1), image2(2)}read-writecurrent
imageInfoTable
OBJECT-TYPE
The table of image info
1.3.6.1.4.1.10297.202.7000.9.3.2not-accessiblecurrent
imageInfoEntry
OBJECT-TYPE
The entry of image info
1.3.6.1.4.1.10297.202.7000.9.3.2.1not-accessiblecurrent
flashPartition
OBJECT-TYPE
The FLASH partition
1.3.6.1.4.1.10297.202.7000.9.3.2.1.1Integer32 (0..2)read-onlycurrent
imageName
OBJECT-TYPE
The image name
1.3.6.1.4.1.10297.202.7000.9.3.2.1.2DisplayStringread-onlycurrent
imageSize
OBJECT-TYPE
The image size
1.3.6.1.4.1.10297.202.7000.9.3.2.1.3Integer32read-onlycurrent
createdTime
OBJECT-TYPE
The FW creation time
1.3.6.1.4.1.10297.202.7000.9.3.2.1.4DisplayStringread-onlycurrent
imageVersion
OBJECT-TYPE
The image version
1.3.6.1.4.1.10297.202.7000.9.3.2.1.5DisplayStringread-onlycurrent
configurationManager
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.4
sourceFile
OBJECT-TYPE
The configuration source file
1.3.6.1.4.1.10297.202.7000.9.4.1INTEGER {running(1), startup(2)}read-writecurrent
destinationFile
OBJECT-TYPE
The configuration destination file
1.3.6.1.4.1.10297.202.7000.9.4.2INTEGER {running(1), startup(2)}read-writecurrent
saveConfiguration
OBJECT-TYPE
Save the current configuration
1.3.6.1.4.1.10297.202.7000.9.4.3INTEGER {save(1)}read-writecurrent
accountManager
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.5
localUserTable
OBJECT-TYPE
The table of local user
1.3.6.1.4.1.10297.202.7000.9.5.1not-accessiblecurrent
localUserEntry
OBJECT-TYPE
The entry of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1not-accessiblecurrent
localUserIndex
OBJECT-TYPE
The index of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.1Integer32 (1..32)read-onlycurrent
localUserName
OBJECT-TYPE
The user name of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.2DisplayStringread-writecurrent
localUserPasswordType
OBJECT-TYPE
The pasword type of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.3INTEGER {cleartext(1), encrypted(2), noPassword(3)}read-writecurrent
localUserPassword
OBJECT-TYPE
The password of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.4DisplayStringread-writecurrent
localUserPrivilegeType
OBJECT-TYPE
The privilege type of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.5INTEGER {admin(1), user(2)}read-writecurrent
localUserRowStatus
OBJECT-TYPE
User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.9.5.1.1.99INTEGER {active(1), notInService(2), createAndWait(5), destory(6)}read-createcurrent
nKey
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.9.6
nKeyAutoMode
OBJECT-TYPE
The auto mode of N-Key.
1.3.6.1.4.1.10297.202.7000.9.6.1INTEGER {enable(1), disable(2)}read-writecurrent
nKeyStatus
OBJECT-TYPE
Select N-key is idle or backup the current configurations to N-Key or restore N-Key's configurations to switch. The fourth option is read-only.
1.3.6.1.4.1.10297.202.7000.9.6.2INTEGER {idle(0), backup(1), restore(2), running(3)}read-writecurrent
traps
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.99
trapObject
OBJECT-IDENTITY
1.3.6.1.4.1.10297.202.7000.99.1
ddmiAlarmDescr
OBJECT-TYPE
The description of DDMI trap
1.3.6.1.4.1.10297.202.7000.99.1.1DisplayStringread-onlycurrent
xRingMasterStatus
OBJECT-TYPE
The status of XRing Pro Master.
1.3.6.1.4.1.10297.202.7000.99.1.2INTEGER {masterToSlave(1), slaveToMaster(2)}read-onlycurrent

Notifications

NameOIDStatus
ddmiAlarmWarning
NOTIFICATION-TYPE
The DDMI trap
1.3.6.1.4.1.10297.202.7000.99.2current
xRingProMasterChange
NOTIFICATION-TYPE
This trap is sent if XRing Pro master change
1.3.6.1.4.1.10297.202.7000.99.3current
stpStateChange
NOTIFICATION-TYPE
This trap is sent if spanning tree port state change to blocking or forwarding
1.3.6.1.4.1.10297.202.7000.99.5current