ADTRAN-AOS-3G
- Registered at
- 1.3.6.1.4.1.664.5.53.6.21.3.6.1.4.1.664.5.53.99.91.3.6.1.4.1.664.6.10000.53.6.2
- Last updated
- 2010-01-05 00:00
- Organization
- ADTRAN, Inc.
- Revisions
- 2010-01-05 00:00, 2010-01-14 00:00
- Namespace
- adtran
- Source file
ADTRAN-AOS-3G- Digest
sha256:2e2abfd886f9a31d9eaac6625dc64791dc233be31b8b86abf179548c53090a15
Description
A MIB module for monitoring 3G module values.
Contact
Technical Support Dept. Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com
Imports
| From | Symbols |
|---|---|
| ADTRAN-AOS | adGenAOSConformance, adGenAOSWan |
| ADTRAN-MIB | adIdentity |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADTRAN-AOS ADTRAN-AOS-3G ADTRAN-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| adGenAOS3G OBJECT-IDENTITY | 1.3.6.1.4.1.664.5.53.6.2 | |||
| adGenAOS3GTraps OBJECT-IDENTITY The table contains traps/alarms caused by changes in configuration values and when statistical data reach certain thresholds. | 1.3.6.1.4.1.664.5.53.6.2.0 | current | ||
| adGenAOS3GTable OBJECT-TYPE The table contains 3G cellular statistical data for the cellular interface. | 1.3.6.1.4.1.664.5.53.6.2.1 | not-accessible | current | |
| adGenAOS3GEntry OBJECT-TYPE This is an entry into the 3G table. | 1.3.6.1.4.1.664.5.53.6.2.1.1 | not-accessible | current | |
| adGenAOS3GNetworkAccessID OBJECT-TYPE The Network Access ID is the User ID submitted by the 3G Modem during Mobile IP authentication. For more information, refer to RFC 4282. | 1.3.6.1.4.1.664.5.53.6.2.1.1.1 | DisplayString | read-only | current |
| adGenAOS3GHASS OBJECT-TYPE This OID displays whether the shared secret for the home agent has been set for Mobile IP authentication. | 1.3.6.1.4.1.664.5.53.6.2.1.1.2 | Bits {unset(0), set(1)} | read-only | current |
| adGenAOS3GHASPI OBJECT-TYPE The Home Agent Security Parameter Index uniquely identifies a security association for the home agent for use during Mobile IP authentication. | 1.3.6.1.4.1.664.5.53.6.2.1.1.3 | Unsigned32 | read-only | current |
| adGenAOS3GAAASS OBJECT-TYPE This OID displays whether the shared secret for AAA has been set for Mobile IP authentication. | 1.3.6.1.4.1.664.5.53.6.2.1.1.4 | Bits {unset(0), set(1)} | read-only | current |
| adGenAOS3GAAASPI OBJECT-TYPE The AAA Security Parameter Index uniquely identifies a security association for AAA for use during Mobile IP authentication. | 1.3.6.1.4.1.664.5.53.6.2.1.1.5 | Unsigned32 | read-only | current |
| adGenAOS3GReverseTunneling OBJECT-TYPE This OID describes if a tunnel is setup from the 3G module's care of address to the home agent. A care of address is a temporary IP address for a mobile device. | 1.3.6.1.4.1.664.5.53.6.2.1.1.6 | Bits {unset(0), set(1)} | read-only | current |
| adGenAOS3GHomeAddress OBJECT-TYPE The permanent home IP address for the 3G module in the cellular network. | 1.3.6.1.4.1.664.5.53.6.2.1.1.7 | IpAddress | read-only | current |
| adGenAOS3GPrimaryHomeAddress OBJECT-TYPE The primary IP address of the 3G module's home agent. | 1.3.6.1.4.1.664.5.53.6.2.1.1.8 | IpAddress | read-only | current |
| adGenAOS3GSecHomeAddress OBJECT-TYPE The secondary IP address of the 3G module's home agent. | 1.3.6.1.4.1.664.5.53.6.2.1.1.9 | IpAddress | read-only | current |
| adGenAOS3GRSSI OBJECT-TYPE The Receive Signal Strength Indicator for the cellular connection. This value is a measurement of signal strength. | 1.3.6.1.4.1.664.5.53.6.2.1.1.10 | Integer32 | read-only | current |
| adGenAOS3GECIO OBJECT-TYPE The Ec/Io for the cellular connection. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. | 1.3.6.1.4.1.664.5.53.6.2.1.1.11 | DisplayString | read-only | current |
| adGenAOS3GPnOffset OBJECT-TYPE The Pn Offset for the cellular connection. Base stations assigned to a particular frequency carrier operate at the same center frequency. The PN offset is used to distinguish base stations from one another. | 1.3.6.1.4.1.664.5.53.6.2.1.1.12 | Integer32 | read-only | current |
| adGenAOS3GServiceType OBJECT-TYPE The current Cellular Service Type for the cellular connection. | 1.3.6.1.4.1.664.5.53.6.2.1.1.13 | DisplayString | read-only | current |
| adGenAOS3GServiceTypePreference OBJECT-TYPE The current Cellular Service Type Preference for the cellular connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode which chooses the best available signal. | 1.3.6.1.4.1.664.5.53.6.2.1.1.14 | INTEGER {modeAUTO(4), mode1xRTT(9), mode1xEVDO(10)} | read-write | current |
| adGenAOS3GConnectionState OBJECT-TYPE The current Connection State for the cellular connection. | 1.3.6.1.4.1.664.5.53.6.2.1.1.15 | DisplayString | read-only | current |
| adGenAOS3GECIOIntegerValue OBJECT-TYPE The Ec/Io for the cellular connection displayed in integer form. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. EC/IO values typically are represented as a value with a decimal place. In this representation the value will be scaled by 10. Hence a value of 1.5 will be represented as 15. | 1.3.6.1.4.1.664.5.53.6.2.1.1.16 | Integer32 | read-only | current |
| adGenAOS3GHardwareDataTable OBJECT-TYPE The table contains profile information for the 3G cellular interface. | 1.3.6.1.4.1.664.5.53.6.2.2 | not-accessible | current | |
| adGenAOS3GHardwareDataEntry OBJECT-TYPE This is an entry into the 3G hardware data table. | 1.3.6.1.4.1.664.5.53.6.2.2.1 | not-accessible | current | |
| adGenAOS3GSystemID OBJECT-TYPE The System Identification number is the identifier for a cellular network in a certain area. | 1.3.6.1.4.1.664.5.53.6.2.2.1.1 | Unsigned32 | read-only | current |
| adGenAOS3GNetworkID OBJECT-TYPE The Network Identification number identifies a subset of a particular SID corresponding to different networks. | 1.3.6.1.4.1.664.5.53.6.2.2.1.2 | DisplayString | read-only | current |
| adGenAOS3GPrefferedRoamList OBJECT-TYPE The PRL is a database of cell towers that the cellular modem can roam on. This OID specifies the current version of that database that is programmed onto the cellular modem. | 1.3.6.1.4.1.664.5.53.6.2.2.1.3 | Unsigned32 | read-only | current |
| adGenAOS3GMobileDirNumber OBJECT-TYPE The MDN is the 10 digit phone number assigned to the 3G module. | 1.3.6.1.4.1.664.5.53.6.2.2.1.4 | DisplayString | read-only | current |
| adGenAOS3GESN OBJECT-TYPE The Electronic Serial Number is is a unique number that identifies the 3G module. | 1.3.6.1.4.1.664.5.53.6.2.2.1.5 | DisplayString | read-only | current |
| adGenAOS3GMobileStationID OBJECT-TYPE The MSID is a 10 digit number that identifies the 3G module in the network. | 1.3.6.1.4.1.664.5.53.6.2.2.1.6 | DisplayString | read-only | current |
| adGenAOS3GHardwareVersion OBJECT-TYPE The hardware version of the 3G modem. | 1.3.6.1.4.1.664.5.53.6.2.2.1.7 | DisplayString | read-only | current |
| adGenAOS3GFirmwareVersion OBJECT-TYPE The firmware version of the 3G modem. | 1.3.6.1.4.1.664.5.53.6.2.2.1.8 | DisplayString | read-only | current |
| adGenAOS3GThresholdDataTable OBJECT-TYPE The table contains settings regarding whether the trap is enabled and threshold values for certain traps. | 1.3.6.1.4.1.664.5.53.6.2.3 | not-accessible | current | |
| adGenAOS3GThresholdDataEntry OBJECT-TYPE This is an entry into the 3G threshold data table. | 1.3.6.1.4.1.664.5.53.6.2.3.1 | not-accessible | current | |
| adGenAOS3GEnableTraps OBJECT-TYPE This OID indicates whether traps are enabled for the interface. | 1.3.6.1.4.1.664.5.53.6.2.3.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| adGenAOS3GRSSIThreshold OBJECT-TYPE This is a value from (-200..200) that sets the threshold for an RSSI trap to occur. When the RSSI is below this value, it will cause an RSSI alarm trap. When the RSSI rises above this value, it will cause an RSSI cleared trap. | 1.3.6.1.4.1.664.5.53.6.2.3.1.2 | Integer32 (-200..200) | read-write | current |
| adGenAOS3GECIOThreshold OBJECT-TYPE This is a value from (-200..200) that sets the threshold for an ECIO trap to occur. When the ECIO is below this value, it will cause an ECIO alarm trap. When the ECIO rises above this value, it will cause an ECIO cleared trap. | 1.3.6.1.4.1.664.5.53.6.2.3.1.3 | Integer32 (-200..200) | read-write | current |
| adGenAOS3GConformance OBJECT-IDENTITY | 1.3.6.1.4.1.664.5.53.99.9 | |||
| adGenAOS3GGroup OBJECT-IDENTITY | 1.3.6.1.4.1.664.5.53.99.9.1 | |||
| adGenAOS3GCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.664.5.53.99.9.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| rssiDataRangeAlarm NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has exceeded the range specified by the user. | 1.3.6.1.4.1.664.5.53.6.2.0.1 | current |
| ecioDataRangeAlarm NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has exceeded the range specified by the user. | 1.3.6.1.4.1.664.5.53.6.2.0.2 | current |
| rssiDataRangeClear NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has returned to the range specified by the user. | 1.3.6.1.4.1.664.5.53.6.2.0.3 | current |
| ecioDataRangeClear NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has returned to the range specified by the user. | 1.3.6.1.4.1.664.5.53.6.2.0.4 | current |
| configValueSet NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that a data value object for the 3G cellular interface from the 3G Hardware Table has been modified from the previous state. | 1.3.6.1.4.1.664.5.53.6.2.0.5 | current |
| modemResetAlarm NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the 3G modem has been reset. | 1.3.6.1.4.1.664.5.53.6.2.0.6 | current |
| serviceTypeChangeAlarm NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the service type for the 3G cellular interface has changed. | 1.3.6.1.4.1.664.5.53.6.2.0.7 | current |
| connectionStateDownAlarm NOTIFICATION-TYPE This trap signifies that the SNMP entity, acting in an agent role, has detected that the connection status of the modem has gone down from either DORMANT or a CONNECTED state. | 1.3.6.1.4.1.664.5.53.6.2.0.8 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| adGenAOS3GTableGroup OBJECT-GROUP This group contains 3G cellular statistical data for profile information. | 1.3.6.1.4.1.664.5.53.99.9.1.1 | current |
| adGenAOS3GHardwareDataGroup OBJECT-GROUP This group contains 3G cellular statistical data for hardware information. | 1.3.6.1.4.1.664.5.53.99.9.1.2 | current |
| adGenAOS3GThresholdDataGroup OBJECT-GROUP This group contains threshold data for enabling 3G interface thresholds. | 1.3.6.1.4.1.664.5.53.99.9.1.3 | current |
| adGenAOS3GTrapGroup NOTIFICATION-GROUP Traps which may be used to enhance event driven management of the interface. | 1.3.6.1.4.1.664.5.53.99.9.1.4 | current |
| adGenAOS3GFullCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement version 2 of the adGenAOS3G MIB. | 1.3.6.1.4.1.664.5.53.99.9.2.1 | current |