MIBs Depot

ACS-MIB

Registered at
1.3.6.1.4.1.10418.16
Last updated
2010-10-10 00:00
Organization
Avocent Corporation
Revisions
2010-10-10 00:00, 2009-12-11 00:00, 2007-09-17 00:00
Namespace
avocent
Source file
ACS-MIB
Digest
sha256:cac9134bc4a681218463547e6c96fbe008a85f01ea574abafad674bad95b6564

Description

This module defines the Avocent MIB extensions to ACS60xx products.

Contact

postal : Avocent Corporation 47281 Bayside Parkway Fremont, CA 94538, USA e-mail : Technical Support techsupport@avocent.com

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ACS-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PowerSupplyState
type
SerialPortPinOut
type
SerialPortSignalState
type
SerialPortSpeed
type

Objects

NameOIDSyntaxAccessStatus
acsProducts
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1
acs6016
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1.1
acs6032
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1.2
acs6048
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1.3
acs6004
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1.4
acs6008
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.1.5
acsManagement
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2
acsAppliance
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2.1
acsHostName
OBJECT-TYPE
The appliance name
1.3.6.1.4.1.10418.16.2.1.1DisplayString (SIZE(0..32))read-onlycurrent
acsProductModel
OBJECT-TYPE
The appliance product model
1.3.6.1.4.1.10418.16.2.1.2DisplayString (SIZE(0..50))read-onlycurrent
acsPartNumber
OBJECT-TYPE
The part number of this appliance as shown on the label attached or imprinted on the appliance.
1.3.6.1.4.1.10418.16.2.1.3DisplayString (SIZE(0..32))read-onlycurrent
acsSerialNumber
OBJECT-TYPE
The serial number of this appliance as shown on the label attached or imprinted on the appliance.
1.3.6.1.4.1.10418.16.2.1.4DisplayString (SIZE(0..32))read-onlycurrent
acsEIDNumber
OBJECT-TYPE
The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance.
1.3.6.1.4.1.10418.16.2.1.5DisplayString (SIZE(0..32))read-onlycurrent
acsBootcodeVersion
OBJECT-TYPE
The version of the bootcode of this appliance.
1.3.6.1.4.1.10418.16.2.1.6DisplayString (SIZE(0..32))read-onlycurrent
acsFirmwareVersion
OBJECT-TYPE
The version of the firmware of this appliance.
1.3.6.1.4.1.10418.16.2.1.7DisplayString (SIZE(0..32))read-onlycurrent
acsPowerSupply
OBJECT-IDENTITY
It gives information about Power Supply of this appliance
1.3.6.1.4.1.10418.16.2.1.8current
acsPowerSupplyNumber
OBJECT-TYPE
Number of the power supplies of this appliance
1.3.6.1.4.1.10418.16.2.1.8.1Integer32read-onlycurrent
acsPowerSupplyStatePw1
OBJECT-TYPE
State of the first power supply
1.3.6.1.4.1.10418.16.2.1.8.2PowerSupplyStateread-onlycurrent
acsPowerSupplyStatePw2
OBJECT-TYPE
State of the second power supply
1.3.6.1.4.1.10418.16.2.1.8.3PowerSupplyStateread-onlycurrent
acsReboot
OBJECT-TYPE
A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the appliance immediately reboots.
1.3.6.1.4.1.10418.16.2.1.9INTEGER {noAction(1), reboot(2)}read-writecurrent
acsSessions
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2.2
acsActiveSessionsNumberOfSession
OBJECT-TYPE
Number of active sessions.
1.3.6.1.4.1.10418.16.2.2.1Integer32read-onlycurrent
acsActiveSessionsTable
OBJECT-TYPE
This table contains the list of active sessions.
1.3.6.1.4.1.10418.16.2.2.2not-accessiblecurrent
acsActiveSessionsTableEntry
OBJECT-TYPE
each entry has the information about the active session
1.3.6.1.4.1.10418.16.2.2.2.1not-accessiblecurrent
acsActiveSessionsTableIndex
OBJECT-TYPE
A unique index representing an entry in this table.
1.3.6.1.4.1.10418.16.2.2.2.1.1InterfaceIndexOrZeroread-onlycurrent
acsActiveSessionsTableUser
OBJECT-TYPE
The name of the user that opens this session.
1.3.6.1.4.1.10418.16.2.2.2.1.2DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableGroup
OBJECT-TYPE
The name of the group that the user belongs to.
1.3.6.1.4.1.10418.16.2.2.2.1.3DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableType
OBJECT-TYPE
The session type.
1.3.6.1.4.1.10418.16.2.2.2.1.4DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableConnection
OBJECT-TYPE
Connection type.
1.3.6.1.4.1.10418.16.2.2.2.1.5DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableSessionTime
OBJECT-TYPE
Time of the session
1.3.6.1.4.1.10418.16.2.2.2.1.6DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableFrom
OBJECT-TYPE
The source IP address of the session.
1.3.6.1.4.1.10418.16.2.2.2.1.7DisplayString (SIZE(0..32))read-onlycurrent
acsActiveSessionsTableKill
OBJECT-TYPE
A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immediately kills the session.
1.3.6.1.4.1.10418.16.2.2.2.1.8INTEGER {noAction(1), killSession(2)}read-writecurrent
acsSerialPort
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2.3
acsSerialPortNumberOfPorts
OBJECT-TYPE
Number of Serial Ports (physical serial port plus Aux Port.
1.3.6.1.4.1.10418.16.2.3.1Integer32read-onlycurrent
acsSerialPortTable
OBJECT-TYPE
This table contains information about serial ports.
1.3.6.1.4.1.10418.16.2.3.2not-accessiblecurrent
acsSerialPortTableEntry
OBJECT-TYPE
each entry has the information about specific serial port.
1.3.6.1.4.1.10418.16.2.3.2.1not-accessiblecurrent
acsSerialPortTableNumber
OBJECT-TYPE
A unique index representing an entry in this table. It is the number of the serial port. For AUX port, the number will be the number of physical serial ports plus 1.
1.3.6.1.4.1.10418.16.2.3.2.1.1Integer32 (1..49)read-onlycurrent
acsSerialPortTableDeviceName
OBJECT-TYPE
The associated device name for the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.2DisplayString (SIZE(0..25))read-onlycurrent
acsSerialPortTableStatus
OBJECT-TYPE
The status of the serial port: disabled(1) = it was configured as disable. idle(2) = there is not any session opened in this port. inUse(3) = there is session(s) opened in this port.
1.3.6.1.4.1.10418.16.2.3.2.1.3INTEGER {disabled(1), idle(2), inUse(3)}read-onlycurrent
acsSerialPortTableName
OBJECT-TYPE
Name associated with this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.4DisplayString (SIZE(0..25))read-onlycurrent
acsSerialPortTableProfile
OBJECT-TYPE
Configured profile for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.5INTEGER {casProfile(1), tsProfile(2), dialInProfile(3), powerProfile(4)}read-onlycurrent
acsSerialPortTablePinOut
OBJECT-TYPE
RJ45 Pin-out configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.6SerialPortPinOutread-onlycurrent
acsSerialPortTableComSpeed
OBJECT-TYPE
Speed configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.7SerialPortSpeedread-onlycurrent
acsSerialPortTableComParity
OBJECT-TYPE
Parity configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.8INTEGER {none(1), odd(2), even(3)}read-onlycurrent
acsSerialPortTableComDataSize
OBJECT-TYPE
Data Size configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.9Integer32read-onlycurrent
acsSerialPortTableComStopBits
OBJECT-TYPE
Number of Stop Bits configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.10Integer32read-onlycurrent
acsSerialPortTableComFlowControl
OBJECT-TYPE
Flow Control configured for this serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.11INTEGER {none(1), hardware(2), software(3)}read-onlycurrent
acsSerialPortTableSignalStateDTR
OBJECT-TYPE
State of the DTR RS-232C signal.
1.3.6.1.4.1.10418.16.2.3.2.1.12SerialPortSignalStateread-onlycurrent
acsSerialPortTableSignalStateDCD
OBJECT-TYPE
State of the DCD RS-232C signal.
1.3.6.1.4.1.10418.16.2.3.2.1.13SerialPortSignalStateread-onlycurrent
acsSerialPortTableSignalStateRTS
OBJECT-TYPE
State of the RTS RS-232C signal.
1.3.6.1.4.1.10418.16.2.3.2.1.14SerialPortSignalStateread-onlycurrent
acsSerialPortTableSignalStateCTS
OBJECT-TYPE
State of the CTS RS-232C signal.
1.3.6.1.4.1.10418.16.2.3.2.1.15SerialPortSignalStateread-onlycurrent
acsSerialPortTableTxBytes
OBJECT-TYPE
The number of transmited bytes by the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.16Integer32read-onlycurrent
acsSerialPortTableRxBytes
OBJECT-TYPE
The number of received bytes by the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.17Integer32read-onlycurrent
acsSerialPortTableFrameError
OBJECT-TYPE
The number of frame error detected in the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.18Integer32read-onlycurrent
acsSerialPortTableParityError
OBJECT-TYPE
The number of parity error detected in the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.19Integer32read-onlycurrent
acsSerialPortTableBreak
OBJECT-TYPE
The number of break detected in the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.20Integer32read-onlycurrent
acsSerialPortTableOverrun
OBJECT-TYPE
The number of overrun error detected in the serial port.
1.3.6.1.4.1.10418.16.2.3.2.1.21Integer32read-onlycurrent
acsPowerMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2.5
acsPowerMgmtNumSerialPorts
OBJECT-TYPE
The number of Serial Ports that has PDU connected on the appliance.
1.3.6.1.4.1.10418.16.2.5.1Integer32read-onlycurrent
acsPowerMgmtSerialTable
OBJECT-TYPE
Information about each serial port thas has PDU connect.
1.3.6.1.4.1.10418.16.2.5.2not-accessiblecurrent
acsPowerMgmtSerialTableEntry
OBJECT-TYPE
Information about each serial port thas has PDU connect.
1.3.6.1.4.1.10418.16.2.5.2.1not-accessiblecurrent
acsPowerMgmtSerialTableIndex
OBJECT-TYPE
The index of the register.
1.3.6.1.4.1.10418.16.2.5.2.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtSerialTablePortNumber
OBJECT-TYPE
The number of the serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.2.1.2Integer32read-onlycurrent
acsPowerMgmtSerialTableDeviceName
OBJECT-TYPE
The device name of this serial port.
1.3.6.1.4.1.10418.16.2.5.2.1.3DisplayStringread-onlycurrent
acsPowerMgmtSerialTableNumberPDUs
OBJECT-TYPE
Total number of units connected in this serial port.
1.3.6.1.4.1.10418.16.2.5.2.1.4Integer32read-onlycurrent
acsPowerMgmtPDUTable
OBJECT-TYPE
This table contains the list of detected PDUs.
1.3.6.1.4.1.10418.16.2.5.3not-accessiblecurrent
acsPowerMgmtPDUTableEntry
OBJECT-TYPE
each entry has the information about the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1not-accessiblecurrent
acsPowerMgmtPDUTablePortNumber
OBJECT-TYPE
Number of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.3.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtPDUTablePduIndex
OBJECT-TYPE
A PDU position in the chain.
1.3.6.1.4.1.10418.16.2.5.3.1.2InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtPDUTablePduId
OBJECT-TYPE
PDU identification.
1.3.6.1.4.1.10418.16.2.5.3.1.3DisplayStringread-onlycurrent
acsPowerMgmtPDUTablePortName
OBJECT-TYPE
Name of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.3.1.4DisplayStringread-onlycurrent
acsPowerMgmtPDUTableModel
OBJECT-TYPE
Model of the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.5DisplayStringread-onlycurrent
acsPowerMgmtPDUTableVendor
OBJECT-TYPE
Vendor of the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.6DisplayStringread-onlycurrent
acsPowerMgmtPDUTableFirmwareVersion
OBJECT-TYPE
Version of the PDU firmware.
1.3.6.1.4.1.10418.16.2.5.3.1.7DisplayStringread-onlycurrent
acsPowerMgmtPDUTableNumberOfOutlets
OBJECT-TYPE
Number of outlets of the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.8Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentNOS
OBJECT-TYPE
Number of current sensors in the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.9Integer32read-onlyobsolete
acsPowerMgmtPDUTableCurrent1Value
OBJECT-TYPE
Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
1.3.6.1.4.1.10418.16.2.5.3.1.10Integer32read-onlyobsolete
acsPowerMgmtPDUTableCurrent1Max
OBJECT-TYPE
Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
1.3.6.1.4.1.10418.16.2.5.3.1.11Integer32read-writeobsolete
acsPowerMgmtPDUTableCurrent2Value
OBJECT-TYPE
Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
1.3.6.1.4.1.10418.16.2.5.3.1.12Integer32read-onlyobsolete
acsPowerMgmtPDUTableCurrent2Max
OBJECT-TYPE
Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
1.3.6.1.4.1.10418.16.2.5.3.1.13Integer32read-writeobsolete
acsPowerMgmtPDUTableCurrent3Value
OBJECT-TYPE
Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
1.3.6.1.4.1.10418.16.2.5.3.1.14Integer32read-onlyobsolete
acsPowerMgmtPDUTableCurrent3Max
OBJECT-TYPE
Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
1.3.6.1.4.1.10418.16.2.5.3.1.15Integer32read-writeobsolete
acsPowerMgmtPDUTableTemperatureNOS
OBJECT-TYPE
Number of temperature sensors in the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.16Integer32read-onlyobsolete
acsPowerMgmtPDUTableTemperature1Value
OBJECT-TYPE
Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
1.3.6.1.4.1.10418.16.2.5.3.1.17Integer32read-onlyobsolete
acsPowerMgmtPDUTableTemperature1Max
OBJECT-TYPE
Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.18Integer32read-writeobsolete
acsPowerMgmtPDUTableTemperature2Value
OBJECT-TYPE
Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
1.3.6.1.4.1.10418.16.2.5.3.1.19Integer32read-onlyobsolete
acsPowerMgmtPDUTableTemperature2Max
OBJECT-TYPE
Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.20Integer32read-writeobsolete
acsPowerMgmtPDUTableTemperature3Value
OBJECT-TYPE
Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
1.3.6.1.4.1.10418.16.2.5.3.1.21Integer32read-onlyobsolete
acsPowerMgmtPDUTableTemperature3Max
OBJECT-TYPE
Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.22Integer32read-writeobsolete
acsPowerMgmtPDUTableHumidityNOS
OBJECT-TYPE
Number of humidity sensors in the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.23Integer32read-onlyobsolete
acsPowerMgmtPDUTableHumidity1Value
OBJECT-TYPE
Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
1.3.6.1.4.1.10418.16.2.5.3.1.24Integer32read-onlyobsolete
acsPowerMgmtPDUTableHumidity1Max
OBJECT-TYPE
Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.25Integer32read-writeobsolete
acsPowerMgmtPDUTableHumidity2Value
OBJECT-TYPE
Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
1.3.6.1.4.1.10418.16.2.5.3.1.26Integer32read-onlyobsolete
acsPowerMgmtPDUTableHumidity2Max
OBJECT-TYPE
Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.27Integer32read-writeobsolete
acsPowerMgmtPDUTableHumidity3Value
OBJECT-TYPE
Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
1.3.6.1.4.1.10418.16.2.5.3.1.28Integer32read-onlyobsolete
acsPowerMgmtPDUTableHumidity3Max
OBJECT-TYPE
Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
1.3.6.1.4.1.10418.16.2.5.3.1.29Integer32read-writeobsolete
acsPowerMgmtPDUTableVoltageNOS
OBJECT-TYPE
Number of voltage sensors in the PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.30Integer32read-onlyobsolete
acsPowerMgmtPDUTableVoltage1Value
OBJECT-TYPE
Voltage of this sensor in this PDU unit.
1.3.6.1.4.1.10418.16.2.5.3.1.31Integer32read-onlyobsolete
acsPowerMgmtPDUTableVoltage1Max
OBJECT-TYPE
Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
1.3.6.1.4.1.10418.16.2.5.3.1.32Integer32read-writeobsolete
acsPowerMgmtPDUTableVoltage2Value
OBJECT-TYPE
Voltage of this sensor in this PDU unit.
1.3.6.1.4.1.10418.16.2.5.3.1.33Integer32read-onlyobsolete
acsPowerMgmtPDUTableVoltage2Max
OBJECT-TYPE
Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
1.3.6.1.4.1.10418.16.2.5.3.1.34Integer32read-writeobsolete
acsPowerMgmtPDUTableVoltage3Value
OBJECT-TYPE
Voltage of this sensor in this PDU unit.
1.3.6.1.4.1.10418.16.2.5.3.1.35Integer32read-onlyobsolete
acsPowerMgmtPDUTableVoltage3Max
OBJECT-TYPE
Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
1.3.6.1.4.1.10418.16.2.5.3.1.36Integer32read-writeobsolete
acsPowerMgmtPDUTableNumberOfPhases
OBJECT-TYPE
Number of phases of this PDU unit.
1.3.6.1.4.1.10418.16.2.5.3.1.37INTEGER {single-phase(0), three-phase(3)}read-onlycurrent
acsPowerMgmtPDUTableNumberOfBanks
OBJECT-TYPE
Number of banks of this PDU unit.
1.3.6.1.4.1.10418.16.2.5.3.1.38Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentValue
OBJECT-TYPE
Actual value of current sensor in this PDU.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.39Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentMax
OBJECT-TYPE
Max detected value of current sensor in this PDU.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.40Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentMin
OBJECT-TYPE
Min detected value of current sensor in this PDU.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.41Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentAvg
OBJECT-TYPE
Average value for current sensor in this PDU.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.42Integer32read-onlycurrent
acsPowerMgmtPDUTableCurrentReset
OBJECT-TYPE
Reset max, min and avg values of current.
1.3.6.1.4.1.10418.16.2.5.3.1.43INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPDUTableVoltageType
OBJECT-TYPE
Type of voltage values.
1.3.6.1.4.1.10418.16.2.5.3.1.44INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPDUTableVoltageValue
OBJECT-TYPE
Actual value of voltage sensor in this PDU unit.( V )
1.3.6.1.4.1.10418.16.2.5.3.1.45Integer32read-onlycurrent
acsPowerMgmtPDUTableVoltageMax
OBJECT-TYPE
Max detected value of voltage sensor in this PDU unit.( V )
1.3.6.1.4.1.10418.16.2.5.3.1.46Integer32read-onlycurrent
acsPowerMgmtPDUTableVoltageMin
OBJECT-TYPE
Min detected value of voltage sensor in this PDU unit.( V )
1.3.6.1.4.1.10418.16.2.5.3.1.47Integer32read-onlycurrent
acsPowerMgmtPDUTableVoltageAvg
OBJECT-TYPE
Average value for voltage sensor in this PDU unit.( V )
1.3.6.1.4.1.10418.16.2.5.3.1.48Integer32read-onlycurrent
acsPowerMgmtPDUTableVoltageReset
OBJECT-TYPE
Reset max, min and avg values of voltage.
1.3.6.1.4.1.10418.16.2.5.3.1.49INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPDUTablePowerType
OBJECT-TYPE
Type of power consumption values.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.50INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPDUTablePowerValue
OBJECT-TYPE
Actual value of power consumption in this PDU unit.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.51Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerMax
OBJECT-TYPE
Max detected value of power consumption in this PDU unit.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.52Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerMin
OBJECT-TYPE
Min detected value of power consumption in this PDU unit.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.53Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerAvg
OBJECT-TYPE
Average value for power consumption in this PDU unit.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.3.1.54Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerReset
OBJECT-TYPE
Reset max, min and avg values of power consumption.
1.3.6.1.4.1.10418.16.2.5.3.1.55INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPDUTablePowerFactorType
OBJECT-TYPE
Type of power factor values.
1.3.6.1.4.1.10418.16.2.5.3.1.56INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPDUTablePowerFactorValue
OBJECT-TYPE
Actual value of power factor in this PDU unit.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.3.1.57Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerFactorMax
OBJECT-TYPE
Max detected value of power factor in this PDU unit.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.3.1.58Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerFactorMin
OBJECT-TYPE
Min detected value of power factor in this PDU unit.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.3.1.59Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerFactorAvg
OBJECT-TYPE
Average value for power factor in this PDU unit.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.3.1.60Integer32read-onlycurrent
acsPowerMgmtPDUTablePowerFactorReset
OBJECT-TYPE
Reset max, min and avg values of power factor.
1.3.6.1.4.1.10418.16.2.5.3.1.61INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPDUTableAlarm
OBJECT-TYPE
Show the PDU alarm status.
1.3.6.1.4.1.10418.16.2.5.3.1.62INTEGER {normal(1), blow-fuse(2), hw-ocp(3), high-critical(4), high-warning(5), low-warning(6), low-critical(7)}read-onlycurrent
acsPowerMgmtPDUTableEnvSensors
OBJECT-TYPE
Number of environmental sensor in this PDU.
1.3.6.1.4.1.10418.16.2.5.3.1.63Integer32read-onlycurrent
acsPowerMgmtTotalNumberOfOutlets
OBJECT-TYPE
Number of outlets managed by the appliance.
1.3.6.1.4.1.10418.16.2.5.4Integer32read-onlycurrent
acsPowerMgmtOutletsTable
OBJECT-TYPE
This table contains the information about outlets.
1.3.6.1.4.1.10418.16.2.5.5not-accessiblecurrent
acsPowerMgmtOutletsTableEntry
OBJECT-TYPE
each entry has the information about the outlet.
1.3.6.1.4.1.10418.16.2.5.5.1not-accessiblecurrent
acsPowerMgmtOutletsTablePortNumber
OBJECT-TYPE
Serial Port number.
1.3.6.1.4.1.10418.16.2.5.5.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtOutletsTablePduNumber
OBJECT-TYPE
Index.
1.3.6.1.4.1.10418.16.2.5.5.1.2InterfaceIndexread-onlycurrent
acsPowerMgmtOutletsTableNumber
OBJECT-TYPE
Number of the outlet in the PDU.
1.3.6.1.4.1.10418.16.2.5.5.1.3InterfaceIndexread-onlycurrent
acsPowerMgmtOutletsTableName
OBJECT-TYPE
Name of the outlet.
1.3.6.1.4.1.10418.16.2.5.5.1.4DisplayStringread-onlycurrent
acsPowerMgmtOutletsTableStatus
OBJECT-TYPE
Status of the outlet.
1.3.6.1.4.1.10418.16.2.5.5.1.5INTEGER {off(1), on(2)}read-onlycurrent
acsPowerMgmtOutletsTablePowerControl
OBJECT-TYPE
A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. powerLock(5)= when SET the power lock command is sent to PDU. powerUnlock(6)=when SET the power unlock command is sent to PDU. The powerLock and powerUnlock are valid only for Cyclades-PM PDUs
1.3.6.1.4.1.10418.16.2.5.5.1.6INTEGER {noAction(1), powerOn(2), powerOff(3), powerCycle(4), powerLock(5), powerUnlock(6)}read-writecurrent
acsPowerMgmtOutletsTablePortName
OBJECT-TYPE
Serial Port Name where the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.5.1.7DisplayStringread-onlycurrent
acsPowerMgmtOutletsTablePduId
OBJECT-TYPE
PDU identification.
1.3.6.1.4.1.10418.16.2.5.5.1.8DisplayStringread-onlycurrent
acsPowerMgmtNumberOfOutletGroup
OBJECT-TYPE
Number of configured group of outlets.
1.3.6.1.4.1.10418.16.2.5.6Integer32read-onlycurrent
acsPowerMgmtGroupTable
OBJECT-TYPE
This table contains the information about group of outlets.
1.3.6.1.4.1.10418.16.2.5.7not-accessiblecurrent
acsPowerMgmtGroupTableEntry
OBJECT-TYPE
each entry has the information about group of outlets.
1.3.6.1.4.1.10418.16.2.5.7.1not-accessiblecurrent
acsPowerMgmtGroupTableIndex
OBJECT-TYPE
Index of the group.
1.3.6.1.4.1.10418.16.2.5.7.1.1InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtGroupTableName
OBJECT-TYPE
Name of the group of outlets.
1.3.6.1.4.1.10418.16.2.5.7.1.2DisplayStringread-onlycurrent
acsPowerMgmtGroupTableStatus
OBJECT-TYPE
Status of the group of outlet.
1.3.6.1.4.1.10418.16.2.5.7.1.3INTEGER {off(1), on(2)}read-onlycurrent
acsPowerMgmtGroupTablePowerControl
OBJECT-TYPE
A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU.
1.3.6.1.4.1.10418.16.2.5.7.1.4INTEGER {noAction(1), powerOn(2), powerOff(3), powerCycle(4)}read-writecurrent
acsPowerMgmtPhasesTable
OBJECT-TYPE
This table contains data monitoring of each detected phase.
1.3.6.1.4.1.10418.16.2.5.8not-accessiblecurrent
acsPowerMgmtPhasesTableEntry
OBJECT-TYPE
each entry has the data monitoring about phases.
1.3.6.1.4.1.10418.16.2.5.8.1not-accessiblecurrent
acsPowerMgmtPhasesTablePortNumber
OBJECT-TYPE
Number of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.8.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtPhasesTablePduIndex
OBJECT-TYPE
A PDU position in the chain.
1.3.6.1.4.1.10418.16.2.5.8.1.2InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtPhasesTablePhaseIndex
OBJECT-TYPE
phase index in the PDU.
1.3.6.1.4.1.10418.16.2.5.8.1.3InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtPhasesTablePhaseName
OBJECT-TYPE
phase name in the PDU.
1.3.6.1.4.1.10418.16.2.5.8.1.4DisplayStringread-onlycurrent
acsPowerMgmtPhasesTablePduId
OBJECT-TYPE
PDU identification.
1.3.6.1.4.1.10418.16.2.5.8.1.5DisplayStringread-onlycurrent
acsPowerMgmtPhasesTablePortName
OBJECT-TYPE
Name of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.8.1.6DisplayStringread-onlycurrent
acsPowerMgmtPhasesTableCurrentValue
OBJECT-TYPE
Actual value of current sensor in this phase.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.7Integer32read-onlycurrent
acsPowerMgmtPhasesTableCurrentMax
OBJECT-TYPE
Max detected value of current sensor in this phase.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.8Integer32read-onlycurrent
acsPowerMgmtPhasesTableCurrentMin
OBJECT-TYPE
Min detected value of current sensor in this phase.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.9Integer32read-onlycurrent
acsPowerMgmtPhasesTableCurrentAvg
OBJECT-TYPE
Average value for current sensor in this phase.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.10Integer32read-onlycurrent
acsPowerMgmtPhasesTableCurrentReset
OBJECT-TYPE
Reset max, min and avg values of current.
1.3.6.1.4.1.10418.16.2.5.8.1.11INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPhasesTableVoltageType
OBJECT-TYPE
Type of voltage values.
1.3.6.1.4.1.10418.16.2.5.8.1.12INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPhasesTableVoltageValue
OBJECT-TYPE
Actual value of voltage sensor in this phase.( V )
1.3.6.1.4.1.10418.16.2.5.8.1.13Integer32read-onlycurrent
acsPowerMgmtPhasesTableVoltageMax
OBJECT-TYPE
Max detected value of voltage sensor in this phase.( V )
1.3.6.1.4.1.10418.16.2.5.8.1.14Integer32read-onlycurrent
acsPowerMgmtPhasesTableVoltageMin
OBJECT-TYPE
Min detected value of voltage sensor in this phase.( V )
1.3.6.1.4.1.10418.16.2.5.8.1.15Integer32read-onlycurrent
acsPowerMgmtPhasesTableVoltageAvg
OBJECT-TYPE
Average value for voltage sensor in this phase.( V )
1.3.6.1.4.1.10418.16.2.5.8.1.16Integer32read-onlycurrent
acsPowerMgmtPhasesTableVoltageReset
OBJECT-TYPE
Reset max, min and avg values of voltage.
1.3.6.1.4.1.10418.16.2.5.8.1.17INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPhasesTablePowerType
OBJECT-TYPE
Type of power consumption values.
1.3.6.1.4.1.10418.16.2.5.8.1.18INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPhasesTablePowerValue
OBJECT-TYPE
Actual value of power consumption in this phase.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.19Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerMax
OBJECT-TYPE
Max detected value of power consumption in this phase.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.20Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerMin
OBJECT-TYPE
Min detected value of power consumption in this phase.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.21Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerAvg
OBJECT-TYPE
Average value for power consumption in this phase.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.8.1.22Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerReset
OBJECT-TYPE
Reset max, min and avg values of power consumption.
1.3.6.1.4.1.10418.16.2.5.8.1.23INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPhasesTablePowerFactorType
OBJECT-TYPE
Type of power factor values.
1.3.6.1.4.1.10418.16.2.5.8.1.24INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtPhasesTablePowerFactorValue
OBJECT-TYPE
Actual value of power factor in this phase.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.8.1.25Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerFactorMax
OBJECT-TYPE
Max detected value of power factor in this phase.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.8.1.26Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerFactorMin
OBJECT-TYPE
Min detected value of power factor in this phase.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.8.1.27Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerFactorAvg
OBJECT-TYPE
Average value for power factor in this phase.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.8.1.28Integer32read-onlycurrent
acsPowerMgmtPhasesTablePowerFactorReset
OBJECT-TYPE
Reset max, min and avg values of power factor.
1.3.6.1.4.1.10418.16.2.5.8.1.29INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtPhasesTableAlarm
OBJECT-TYPE
Show the phase alarm status.
1.3.6.1.4.1.10418.16.2.5.8.1.30INTEGER {normal(1), blow-fuse(2), hw-ocp(3), high-critical(4), high-warning(5), low-warning(6), low-critical(7)}read-onlycurrent
acsPowerMgmtBanksTable
OBJECT-TYPE
This table contains data monitoring of each detected bank.
1.3.6.1.4.1.10418.16.2.5.9not-accessiblecurrent
acsPowerMgmtBanksTableEntry
OBJECT-TYPE
each entry has the data monitoring about bank.
1.3.6.1.4.1.10418.16.2.5.9.1not-accessiblecurrent
acsPowerMgmtBanksTablePortNumber
OBJECT-TYPE
Number of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.9.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtBanksTablePduIndex
OBJECT-TYPE
A PDU position in the chain.
1.3.6.1.4.1.10418.16.2.5.9.1.2InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtBanksTableBankIndex
OBJECT-TYPE
Bank index in the PDU.
1.3.6.1.4.1.10418.16.2.5.9.1.3InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtBanksTableBankName
OBJECT-TYPE
Bank name in the PDU.
1.3.6.1.4.1.10418.16.2.5.9.1.4DisplayStringread-onlycurrent
acsPowerMgmtBanksTablePduId
OBJECT-TYPE
PDU identification.
1.3.6.1.4.1.10418.16.2.5.9.1.5DisplayStringread-onlycurrent
acsPowerMgmtBanksTablePortName
OBJECT-TYPE
Name of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.9.1.6DisplayStringread-onlycurrent
acsPowerMgmtBanksTableCurrentValue
OBJECT-TYPE
Actual value of current sensor in this bank.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.7Integer32read-onlycurrent
acsPowerMgmtBanksTableCurrentMax
OBJECT-TYPE
Max detected value of current sensor in this bank.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.8Integer32read-onlycurrent
acsPowerMgmtBanksTableCurrentMin
OBJECT-TYPE
Min detected value of current sensor in this bank.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.9Integer32read-onlycurrent
acsPowerMgmtBanksTableCurrentAvg
OBJECT-TYPE
Average value for current sensor in this bank.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.10Integer32read-onlycurrent
acsPowerMgmtBanksTableCurrentReset
OBJECT-TYPE
Reset max, min and avg values of current.
1.3.6.1.4.1.10418.16.2.5.9.1.11INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtBanksTableVoltageType
OBJECT-TYPE
Type of voltage values.
1.3.6.1.4.1.10418.16.2.5.9.1.12INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtBanksTableVoltageValue
OBJECT-TYPE
Actual value of voltage sensor in this bank.( V )
1.3.6.1.4.1.10418.16.2.5.9.1.13Integer32read-onlycurrent
acsPowerMgmtBanksTableVoltageMax
OBJECT-TYPE
Max detected value of voltage sensor in this bank.( V )
1.3.6.1.4.1.10418.16.2.5.9.1.14Integer32read-onlycurrent
acsPowerMgmtBanksTableVoltageMin
OBJECT-TYPE
Min detected value of voltage sensor in this bank.( V )
1.3.6.1.4.1.10418.16.2.5.9.1.15Integer32read-onlycurrent
acsPowerMgmtBanksTableVoltageAvg
OBJECT-TYPE
Average value for voltage sensor in this bank.( V )
1.3.6.1.4.1.10418.16.2.5.9.1.16Integer32read-onlycurrent
acsPowerMgmtBanksTableVoltageReset
OBJECT-TYPE
Reset max, min and avg values of voltage.
1.3.6.1.4.1.10418.16.2.5.9.1.17INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtBanksTablePowerType
OBJECT-TYPE
Type of power consumption values.
1.3.6.1.4.1.10418.16.2.5.9.1.18INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtBanksTablePowerValue
OBJECT-TYPE
Actual value of power consumption in this bank.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.19Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerMax
OBJECT-TYPE
Max detected value of power consumption in this bank.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.20Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerMin
OBJECT-TYPE
Min detected value of power consumption in this bank.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.21Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerAvg
OBJECT-TYPE
Average value for power consumption in this bank.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.9.1.22Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerReset
OBJECT-TYPE
Reset max, min and avg values of power consumption.
1.3.6.1.4.1.10418.16.2.5.9.1.23INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtBanksTablePowerFactorType
OBJECT-TYPE
Type of power factor values.
1.3.6.1.4.1.10418.16.2.5.9.1.24INTEGER {none-sensor(0), estimated(1), read(2)}read-onlycurrent
acsPowerMgmtBanksTablePowerFactorValue
OBJECT-TYPE
Actual value of power factor in this bank.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.9.1.25Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerFactorMax
OBJECT-TYPE
Max detected value of power factor in this bank.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.9.1.26Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerFactorMin
OBJECT-TYPE
Min detected value of power factor in this bank.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.9.1.27Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerFactorAvg
OBJECT-TYPE
Average value for power factor in this bank.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.9.1.28Integer32read-onlycurrent
acsPowerMgmtBanksTablePowerFactorReset
OBJECT-TYPE
Reset max, min and avg values of power factor.
1.3.6.1.4.1.10418.16.2.5.9.1.29INTEGER {no-action(1), reset(2)}read-writecurrent
acsPowerMgmtBanksTableAlarm
OBJECT-TYPE
Show the bank alarm status.
1.3.6.1.4.1.10418.16.2.5.9.1.30INTEGER {normal(1), blow-fuse(2), hw-ocp(3), high-critical(4), high-warning(5), low-warning(6), low-critical(7)}read-onlycurrent
acsPowerMgmtEnvMonTable
OBJECT-TYPE
This table contains data monitoring of each detected environmental sensor.
1.3.6.1.4.1.10418.16.2.5.10not-accessiblecurrent
acsPowerMgmtEnvMonTableEntry
OBJECT-TYPE
each entry has the data monitoring about environmental sensors.
1.3.6.1.4.1.10418.16.2.5.10.1not-accessiblecurrent
acsPowerMgmtEnvMonTablePortNumber
OBJECT-TYPE
Number of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.10.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtEnvMonTablePduIndex
OBJECT-TYPE
A PDU position in the chain.
1.3.6.1.4.1.10418.16.2.5.10.1.2InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtEnvMonTableIndex
OBJECT-TYPE
envmon sensor index.
1.3.6.1.4.1.10418.16.2.5.10.1.3InterfaceIndexOrZeroread-onlycurrent
acsPowerMgmtEnvMonTableName
OBJECT-TYPE
envmon sensor name.
1.3.6.1.4.1.10418.16.2.5.10.1.4DisplayStringread-onlycurrent
acsPowerMgmtEnvMonTablePduId
OBJECT-TYPE
PDU identification.
1.3.6.1.4.1.10418.16.2.5.10.1.5DisplayStringread-onlycurrent
acsPowerMgmtEnvMonTablePortName
OBJECT-TYPE
Name of serial port when the PDU is connected.
1.3.6.1.4.1.10418.16.2.5.10.1.6DisplayStringread-onlycurrent
acsPowerMgmtEnvMonTableType
OBJECT-TYPE
The type of environmental monitor.
1.3.6.1.4.1.10418.16.2.5.10.1.7INTEGER {temp-internal(1), temperature(2), humidity(3), air-flow(4), smoke(5), dry-concact(6), water-level(7), motion(8), unplugged(9), unknown(10)}read-onlycurrent
acsPowerMgmtEnvMonTableStatus
OBJECT-TYPE
Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor.
1.3.6.1.4.1.10418.16.2.5.10.1.8INTEGER {normal(1), triggered(2), not-applicable(3)}read-onlycurrent
acsPowerMgmtEnvMonTableValue
OBJECT-TYPE
Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
1.3.6.1.4.1.10418.16.2.5.10.1.9Integer32read-onlycurrent
acsPowerMgmtEnvMonTableMaxValue
OBJECT-TYPE
Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
1.3.6.1.4.1.10418.16.2.5.10.1.10Integer32read-onlycurrent
acsPowerMgmtOutElecMonTable
OBJECT-TYPE
This table contains the information about data monitoring of outlets.
1.3.6.1.4.1.10418.16.2.5.11not-accessiblecurrent
acsPowerMgmtOutElecMonTableEntry
OBJECT-TYPE
each entry has the information about the outlet.
1.3.6.1.4.1.10418.16.2.5.11.1not-accessiblecurrent
acsPowerMgmtOutElecMonTablePortNumber
OBJECT-TYPE
Serial Port number.
1.3.6.1.4.1.10418.16.2.5.11.1.1InterfaceIndexread-onlycurrent
acsPowerMgmtOutElecMonTablePduNumber
OBJECT-TYPE
Index.
1.3.6.1.4.1.10418.16.2.5.11.1.2InterfaceIndexread-onlycurrent
acsPowerMgmtOutElecMonTableNumber
OBJECT-TYPE
Number of the outlet in the PDU.
1.3.6.1.4.1.10418.16.2.5.11.1.3InterfaceIndexread-onlycurrent
acsPowerMgmtOutElecMonTableCurrentValue
OBJECT-TYPE
Actual value of outlet current sensor.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.4Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableCurrentMax
OBJECT-TYPE
Max detected value of outlet current sensor.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.5Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableCurrentMin
OBJECT-TYPE
Min detected value of outlet current sensor.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.6Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableCurrentAvg
OBJECT-TYPE
Average value for outlet current sensor.( A x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.7Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableCurrentReset
OBJECT-TYPE
Reset max, min and avertage values of outlet current.
1.3.6.1.4.1.10418.16.2.5.11.1.8INTEGER {noAction(1), reset(2)}read-writecurrent
acsPowerMgmtOutElecMonTablePowerValue
OBJECT-TYPE
Actual value of outlet power comsumption sensor.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.9Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerMax
OBJECT-TYPE
Max detected value of outlet power comsumption sensor.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.10Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerMin
OBJECT-TYPE
Min detected value of outlet power comsumption sensor.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.11Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerAvg
OBJECT-TYPE
Average value for outlet power comsumption sensor.( W x 10 )
1.3.6.1.4.1.10418.16.2.5.11.1.12Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerReset
OBJECT-TYPE
Reset max, min and avertage values of outlet power comsumption.
1.3.6.1.4.1.10418.16.2.5.11.1.13INTEGER {noAction(1), reset(2)}read-writecurrent
acsPowerMgmtOutElecMonTableVoltageValue
OBJECT-TYPE
Actual value of outlet voltage sensor.( V )
1.3.6.1.4.1.10418.16.2.5.11.1.14Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableVoltageMax
OBJECT-TYPE
Max detected value of outlet voltage sensor.( V )
1.3.6.1.4.1.10418.16.2.5.11.1.15Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableVoltageMin
OBJECT-TYPE
Min detected value of outlet voltage sensor.( V )
1.3.6.1.4.1.10418.16.2.5.11.1.16Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableVoltageAvg
OBJECT-TYPE
Average value for outlet voltage sensor.( V )
1.3.6.1.4.1.10418.16.2.5.11.1.17Integer32read-onlycurrent
acsPowerMgmtOutElecMonTableVoltageReset
OBJECT-TYPE
Reset max, min and avertage values of outlet voltage.
1.3.6.1.4.1.10418.16.2.5.11.1.18INTEGER {noAction(1), reset(2)}read-writecurrent
acsPowerMgmtOutElecMonTablePowerFactorValue
OBJECT-TYPE
Actual value of outlet power-factor sensor.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.11.1.19Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerFactorMax
OBJECT-TYPE
Max detected value of outlet power-factor sensor.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.11.1.20Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerFactorMin
OBJECT-TYPE
Min detected value of outlet power-factor sensor.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.11.1.21Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerFactorAvg
OBJECT-TYPE
Average value for outlet power-factor sensor.( PF x 100 )
1.3.6.1.4.1.10418.16.2.5.11.1.22Integer32read-onlycurrent
acsPowerMgmtOutElecMonTablePowerFactorReset
OBJECT-TYPE
Reset max, min and avertage values of outlet power-factor.
1.3.6.1.4.1.10418.16.2.5.11.1.23INTEGER {noAction(1), reset(2)}read-writecurrent
acsPowerMgmtOutElecMonTableAlarm
OBJECT-TYPE
Show the outlet alarm status.
1.3.6.1.4.1.10418.16.2.5.11.1.24INTEGER {normal(1), blow-fuse(2), hw-ocp(3), high-critical(4), high-warning(5), low-warning(6), low-critical(7)}read-onlycurrent
acsTrapObject
OBJECT-IDENTITY
1.3.6.1.4.1.10418.16.2.6