ACD-SA-MIB
- Registered at
- 1.3.6.1.4.1.22420.2.12
- Last updated
- 2011-12-21 01:00
- Organization
- Accedian Networks, Inc.
- Revisions
- 2011-12-21 01:00, 2011-03-15 01:00
- Namespace
- accedian
- Source file
ACD-SA-MIB- Digest
sha256:261d8f53912018889d505318802c788a6786e054f99c770e224eba35f5972812
Description
The Service Availability database for this Accedian Networks device.
Contact
Accedian Technical Assistance Center Accedian Networks, Inc. 4878 Levy, suite 202 Saint-Laurent, Quebec Canada H4R 2P1 E-mail: support@accedian.com
Imports
| From | Symbols |
|---|---|
| ACCEDIAN-SMI | acdMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ACCEDIAN-SMI ACD-SA-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AcdSaAdminStateFlag TEXTUAL-CONVENTION This flag is used for the administrative state. The value IS indicates the state is In-Service. The value OOS indicates the state is Out-of-Service. | current | |||
| AcdSaMetricType TEXTUAL-CONVENTION A value that represents a type of metric that can be used in an instance of Service Availability. | current | |||
| AcdSaOperStateFlag TEXTUAL-CONVENTION This flag is used for the operational state. The value IS indicates the state is In-Service. The value OOS indicates the state is Out-of-Service. The value oos-au indicates the state is Out-of-Service-Autonomous. This state is entered when all of the metrics associated with the service instance are disabled. | current | |||
| AcdSaValidFlag TEXTUAL-CONVENTION The validity flag can have three values: valid, adjusted, or pending. The value of valid indicates the metrics are calculated normally. The value of adjusted is used to indicate a change occurred in the configuration during the reporting period which may impact the service availability calculation. The value of pending indicates that the counters were reset in the middle of a time interval. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| acdSaNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.0 | |||
| acdSaMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.1 | |||
| acdSaConfig OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.1.1 | |||
| acdSaServiceConfigTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.1.1 | not-accessible | current | |
| acdSaServiceConfigEntry OBJECT-TYPE An entry consisting of all settings for a Service. | 1.3.6.1.4.1.22420.2.12.1.1.1.1 | not-accessible | current | |
| acdSaServiceIndex OBJECT-TYPE Unique value for each service instance. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.1 | Unsigned32 | not-accessible | current |
| acdSaServiceConfigRowStatus OBJECT-TYPE All columns must have a valid value before a row can be activated. To create a new Service you shall provide a unique name for an empty row with the RowStatus set to Create and Go. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.2 | RowStatus | read-create | current |
| acdSaServiceConfigName OBJECT-TYPE A unique name used to identify the Service. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.3 | DisplayString (SIZE(1..31)) | read-create | current |
| acdSaServiceConfigAdminState OBJECT-TYPE Administrative state is(1) or oos(2). | 1.3.6.1.4.1.22420.2.12.1.1.1.1.4 | AcdSaAdminStateFlag | read-write | current |
| acdSaServiceConfigReportingPeriod OBJECT-TYPE A reporting period over which availability counters are evaluated in addition to the monotonic counters (In minutes). | 1.3.6.1.4.1.22420.2.12.1.1.1.1.5 | Unsigned32 (1..1440) | read-write | current |
| acdSaServiceConfigUaWindowSize OBJECT-TYPE The number of consecutive seconds over which to assess unavailability. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.6 | Unsigned32 (1..1000) | read-write | current |
| acdSaServiceConfigHliWindowSize OBJECT-TYPE The number of consecutive Time Intervals used to assess High Loss Intervals for this instance. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.7 | Unsigned32 (1..999) | read-write | current |
| acdSaServiceConfigTimeInterval OBJECT-TYPE The interval of time during which the metric is evaluated. Allowed values are 1, 5, 10, 20, or 60. | 1.3.6.1.4.1.22420.2.12.1.1.1.1.8 | Unsigned32 (1..60) | read-write | current |
| acdSaMetricConfigTable OBJECT-TYPE The ..... | 1.3.6.1.4.1.22420.2.12.1.1.2 | not-accessible | current | |
| acdSaMetricConfigEntry OBJECT-TYPE An entry consisting of all settings for a Metric. | 1.3.6.1.4.1.22420.2.12.1.1.2.1 | not-accessible | current | |
| acdSaMetricIndex OBJECT-TYPE Index for each metric instance. | 1.3.6.1.4.1.22420.2.12.1.1.2.1.1 | Unsigned32 | not-accessible | current |
| acdSaMetricConfigRowStatus OBJECT-TYPE All columns must have a valid value before a row can be activated. To create a new Service you shall provide the a unique name for an empty row with the RowStatus set to Create and Go. To delete the VLAN set you need to set the RowStatus to destroy. | 1.3.6.1.4.1.22420.2.12.1.1.2.1.2 | RowStatus | read-create | current |
| acdSaMetricConfigName OBJECT-TYPE A unique name used to identify the Metric. | 1.3.6.1.4.1.22420.2.12.1.1.2.1.3 | DisplayString (SIZE(1..31)) | read-create | current |
| acdSaMetricConfigSrcName OBJECT-TYPE A unique name used to identify the source metric. | 1.3.6.1.4.1.22420.2.12.1.1.2.1.4 | DisplayString (SIZE(1..31)) | read-create | current |
| acdSaMetricConfigType OBJECT-TYPE Enable or disable the Service Availability entry. | 1.3.6.1.4.1.22420.2.12.1.1.2.1.5 | AcdSaMetricType | read-write | current |
| acdSaMetricConfigThreshold OBJECT-TYPE Indicates the delay threshold for this metric when type is one of metric delay parameters (in micro-seconds). Indicates the packet loss threshold for this metric when type is one of packet-loss parameter expressed in millionth of percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.1.2.1.6 | Unsigned32 | read-write | current |
| acdSaCounter OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.1.2 | |||
| acdSaServiceCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.1 | not-accessible | current | |
| acdSaServiceCounterEntry OBJECT-TYPE An entry consisting of all counters for a Service. | 1.3.6.1.4.1.22420.2.12.1.2.1.1 | not-accessible | current | |
| acdSaServiceCounterPeriodIndex OBJECT-TYPE An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.1 | Unsigned32 | read-only | current |
| acdSaServiceCounterValidFlag OBJECT-TYPE Indicates the validity of the service counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.2 | AcdSaValidFlag | read-only | current |
| acdSaServiceCounterUpTime OBJECT-TYPE Uptime is a measure of the time a service has been up during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.3 | Unsigned32 | read-only | current |
| acdSaServiceCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a service has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.4 | Unsigned32 | read-only | current |
| acdSaServiceCounterMaintTime OBJECT-TYPE The MaintTime is a measure of the time a service has been in maintenance during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.5 | Unsigned32 | read-only | current |
| acdSaServiceCounterAvailRatio OBJECT-TYPE Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.1.1.6 | Unsigned32 (0..100000000) | read-only | current |
| acdSaServiceCounterGaps OBJECT-TYPE The gap shall be the number of time the state change from available to unavailable. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.7 | Unsigned32 | read-only | current |
| acdSaServiceCounterLargestGap OBJECT-TYPE The largest gap shall be the largest number of consecutive unavailable second. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.8 | Unsigned32 | read-only | current |
| acdSaServiceCounterChliTime OBJECT-TYPE The CHLI time is a counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.1.1.9 | Unsigned32 | read-only | current |
| acdSaServiceCounterChliRatio OBJECT-TYPE The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.1.1.10 | Unsigned32 (0..100000000) | read-only | current |
| acdSaServiceHistCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.2 | not-accessible | current | |
| acdSaServiceHistCounterEntry OBJECT-TYPE An entry consisting of all counters for a Service. | 1.3.6.1.4.1.22420.2.12.1.2.2.1 | not-accessible | current | |
| acdSaServiceHistCounterPeriodIndex OBJECT-TYPE An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.1 | Unsigned32 | not-accessible | current |
| acdSaServiceHistCounterIntervalEnd OBJECT-TYPE This is the time of the end of this entry. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.2 | DateAndTime | read-only | current |
| acdSaServiceHistCounterValidFlag OBJECT-TYPE Indicates the validity of the service counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.3 | AcdSaValidFlag | read-only | current |
| acdSaServiceHistCounterUpTime OBJECT-TYPE Uptime is a measure of the time a service has been up during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.4 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a service has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.5 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterMaintTime OBJECT-TYPE The MaintTime is a measure of the time a service has been in maintenance during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.6 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterAvailRatio OBJECT-TYPE Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.2.1.7 | Unsigned32 (0..100000000) | read-only | current |
| acdSaServiceHistCounterGaps OBJECT-TYPE The gap shall be the number of time the state change from available to unavailable. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.8 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterLargestGap OBJECT-TYPE The largest gap shall be the largest number of consecutive unavailable second. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.9 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterChliTime OBJECT-TYPE The CHLI time is a counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.2.1.10 | Unsigned32 | read-only | current |
| acdSaServiceHistCounterChliRatio OBJECT-TYPE The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.2.1.11 | Unsigned32 (0..100000000) | read-only | current |
| acdSaServiceMonoCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.3 | not-accessible | current | |
| acdSaServiceMonoCounterEntry OBJECT-TYPE An entry consisting of all monotonic counters for a Service. | 1.3.6.1.4.1.22420.2.12.1.2.3.1 | not-accessible | current | |
| acdSaServiceMonoCounterValidFlag OBJECT-TYPE Indicates the validity of the service counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.1 | AcdSaValidFlag | read-only | current |
| acdSaServiceMonoCounterUpTime OBJECT-TYPE Uptime is a measure of the time a service has been up during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.2 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a service has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.3 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterMaintTime OBJECT-TYPE The MaintTime is a measure of the time a service has been in maintenance during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.4 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterAvailRatio OBJECT-TYPE Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.3.1.5 | Unsigned32 (0..100000000) | read-only | current |
| acdSaServiceMonoCounterGaps OBJECT-TYPE The gap shall be the number of time the state change from available to unavailable. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.6 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterLargestGap OBJECT-TYPE The largest gap shall be the largest number of consecutive unavailable second. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.7 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterChliTime OBJECT-TYPE A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.3.1.8 | Unsigned32 | read-only | current |
| acdSaServiceMonoCounterChliRatio OBJECT-TYPE The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.12.1.2.3.1.9 | Unsigned32 (0..100000000) | read-only | current |
| acdSaMetricCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.4 | not-accessible | current | |
| acdSaMetricCounterEntry OBJECT-TYPE An entry consisting of all counters for a Metric. | 1.3.6.1.4.1.22420.2.12.1.2.4.1 | not-accessible | current | |
| acdSaMetricCounterValidFlag OBJECT-TYPE Indicates the validity of the metric counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.4.1.1 | AcdSaValidFlag | read-only | current |
| acdSaMetricCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a metric has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.4.1.2 | Unsigned32 | read-only | current |
| acdSaMetricCounterChliTime OBJECT-TYPE A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.4.1.3 | Unsigned32 | read-only | current |
| acdSaMetricHistCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.5 | not-accessible | current | |
| acdSaMetricHistCounterEntry OBJECT-TYPE An entry consisting of all counters for a Metric. | 1.3.6.1.4.1.22420.2.12.1.2.5.1 | not-accessible | current | |
| acdSaMetricHistCounterID OBJECT-TYPE Unique value for each Metric instance. This value follows the ordering of the service table. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.1 | Unsigned32 | not-accessible | current |
| acdSaMetricHistCounterPeriodIndex OBJECT-TYPE An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.2 | Unsigned32 | not-accessible | current |
| acdSaMetricHistCounterIntervalEnd OBJECT-TYPE This is the time of the end of this entry. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.3 | DateAndTime | read-only | current |
| acdSaMetricHistCounterValidFlag OBJECT-TYPE Indicates the validity of the metric counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.4 | AcdSaValidFlag | read-only | current |
| acdSaMetricHistCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a metric has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.5 | Unsigned32 | read-only | current |
| acdSaMetricHistCounterChliTime OBJECT-TYPE A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.5.1.6 | Unsigned32 | read-only | current |
| acdSaMetricMonoCounterTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.2.6 | not-accessible | current | |
| acdSaMetricMonoCounterEntry OBJECT-TYPE An entry consisting of all counters for a Metric. | 1.3.6.1.4.1.22420.2.12.1.2.6.1 | not-accessible | current | |
| acdSaMetricMonoCounterValidFlag OBJECT-TYPE Indicates the validity of the metric counter during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.6.1.1 | AcdSaValidFlag | read-only | current |
| acdSaMetricMonoCounterUaTime OBJECT-TYPE The UaTime is a measure of the time a metric has been unavailable during this sampling interval. | 1.3.6.1.4.1.22420.2.12.1.2.6.1.2 | Unsigned32 | read-only | current |
| acdSaMetricMonoCounterChliTime OBJECT-TYPE A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset. | 1.3.6.1.4.1.22420.2.12.1.2.6.1.3 | Unsigned32 | read-only | current |
| acdSaStatus OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.1.3 | |||
| acdSaServiceStatusTable OBJECT-TYPE This table contains all instance of service availability of this unit. | 1.3.6.1.4.1.22420.2.12.1.3.1 | not-accessible | current | |
| acdSaServiceStatusEntry OBJECT-TYPE An entry consisting of all status for a Service. | 1.3.6.1.4.1.22420.2.12.1.3.1.1 | not-accessible | current | |
| acdSaServiceStatusID OBJECT-TYPE Unique value for each service instance. | 1.3.6.1.4.1.22420.2.12.1.3.1.1.1 | Unsigned32 | not-accessible | current |
| acdSaServiceStatusName OBJECT-TYPE A unique name used to identify the Service. | 1.3.6.1.4.1.22420.2.12.1.3.1.1.2 | DisplayString (SIZE(1..31)) | read-only | current |
| acdSaServiceStatusAdminState OBJECT-TYPE Administrative state is one of is(1) or oos(2). | 1.3.6.1.4.1.22420.2.12.1.3.1.1.3 | AcdSaAdminStateFlag | read-only | current |
| acdSaServiceStatusOperState OBJECT-TYPE Operational state is one of is(1), oos(2) or oosAu (3). | 1.3.6.1.4.1.22420.2.12.1.3.1.1.4 | AcdSaOperStateFlag | read-only | current |
| acdSaServiceStatusNbrMetrics OBJECT-TYPE The number of metrics associated with this Service instance. | 1.3.6.1.4.1.22420.2.12.1.3.1.1.5 | Gauge32 | read-only | current |
| acdSaConformance OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.2 | |||
| acdSaCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.2.1 | |||
| acdSaGroups OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.12.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| acdSaCompliance MODULE-COMPLIANCE The compliance statement for support of the ACD-SA-MIB module. | 1.3.6.1.4.1.22420.2.12.2.1.1 | current |
| acdSaServiceConfigGroup OBJECT-GROUP Objects for the Service configuration Group. | 1.3.6.1.4.1.22420.2.12.2.2.1 | current |
| acdSaMetricConfigGroup OBJECT-GROUP Objects for the Metric configuration Group. | 1.3.6.1.4.1.22420.2.12.2.2.2 | current |
| acdSaServiceCounterGroup OBJECT-GROUP Objects for the Service Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.3 | current |
| acdSaServiceHistCounterGroup OBJECT-GROUP Objects for the Service History Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.4 | current |
| acdSaServiceMonoCounterGroup OBJECT-GROUP Objects for the Service Monotonic Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.5 | current |
| acdSaMetricCounterGroup OBJECT-GROUP Objects for the Metric Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.6 | current |
| acdSaMetricHistCounterGroup OBJECT-GROUP Objects for the Metric History Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.7 | current |
| acdSaMetricMonoCounterGroup OBJECT-GROUP Objects for the Metric History Counter Group. | 1.3.6.1.4.1.22420.2.12.2.2.8 | current |
| acdSaServiceStatusGroup OBJECT-GROUP Objects for the Service Status Group. | 1.3.6.1.4.1.22420.2.12.2.2.9 | current |