ACD-PAA-MIB
- Registered at
- 1.3.6.1.4.1.22420.2.5
- Last updated
- 2010-11-10 01:00
- Organization
- Accedian Networks, Inc.
- Revisions
- 2010-11-10 01:00, 2009-02-23 01:00, 2008-02-06 01:00, 2007-10-12 01:00, 2006-12-18 01:00, 2006-11-11 01:00
- Namespace
- accedian
- Source file
ACD-PAA-MIB- Digest
sha256:f0e4d86ee33311b91d9772e7cfa7b59b350b7331b430dc8d7049f0e9792da1e0
Description
PAA database for this Accedian Networks device.
Contact
Accedian Technical Assistance Center Accedian Networks, Inc. 4878 Levy, suite 202 Saint-Laurent, Quebec Canada H4R 2P1 E-mail: support@accedian.com
Imports
| From | Symbols |
|---|---|
| ACCEDIAN-SMI | acdMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ACCEDIAN-SMI ACD-PAA-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| acdPaaResultTable OBJECT-TYPE Result table of all Paa entries | 1.3.6.1.4.1.22420.2.5.1 | not-accessible | current | |
| acdPaaResultEntry OBJECT-TYPE An entry consisting of results for a PAA instance. | 1.3.6.1.4.1.22420.2.5.1.1 | not-accessible | current | |
| acdPaaResultID OBJECT-TYPE Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.1.1.1 | Unsigned32 | not-accessible | current |
| acdPaaResultState OBJECT-TYPE Indicates the state of the instance. | 1.3.6.1.4.1.22420.2.5.1.1.2 | INTEGER {disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6)} | read-only | current |
| acdPaaResultPktLossNeCurrValid OBJECT-TYPE Indicates the validity of the Near-end current packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.3 | TruthValue | read-only | current |
| acdPaaResultPktLossNeCurrValue OBJECT-TYPE Indicates the Near-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.4 | Unsigned32 (0..10000) | read-only | current |
| acdPaaResultPktLossNePrevValid OBJECT-TYPE Indicates the validity of the Near-end previous packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.5 | TruthValue | read-only | current |
| acdPaaResultPktLossNePrevValue OBJECT-TYPE Indicates the Near-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.6 | Unsigned32 (0..10000) | read-only | current |
| acdPaaResultPktLossFeCurrValid OBJECT-TYPE Indicates the validity of the Far-end current packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.7 | TruthValue | read-only | current |
| acdPaaResultPktLossFeCurrValue OBJECT-TYPE Indicates the Far-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.8 | Unsigned32 (0..10000) | read-only | current |
| acdPaaResultPktLossFePrevValid OBJECT-TYPE Indicates the validity of the Far-end previous packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.9 | TruthValue | read-only | current |
| acdPaaResultPktLossFePrevValue OBJECT-TYPE Indicates the Far-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.10 | Unsigned32 (0..10000) | read-only | current |
| acdPaaResultOneWayDvInstValue OBJECT-TYPE Indicates the One-way delay variation instantaneous value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.11 | Integer32 | read-only | current |
| acdPaaResultOneWayDvCurrValid OBJECT-TYPE Indicates the validity of the current One-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.12 | TruthValue | read-only | current |
| acdPaaResultOneWayDvCurrMinValue OBJECT-TYPE Indicates the current One-way delay variation minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.13 | Integer32 | read-only | current |
| acdPaaResultOneWayDvCurrMaxValue OBJECT-TYPE Indicates the current One-way delay variation maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.14 | Integer32 | read-only | current |
| acdPaaResultOneWayDvCurrAvgValue OBJECT-TYPE Indicates the current One-way delay variation average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.15 | Integer32 | read-only | current |
| acdPaaResultOneWayDvCurrThreshExc OBJECT-TYPE Indicates the current number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.16 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDvPrevValid OBJECT-TYPE Indicates the validity of the previous One-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.17 | TruthValue | read-only | current |
| acdPaaResultOneWayDvPrevMinValue OBJECT-TYPE Indicates the previous One-way delay variation minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.18 | Integer32 | read-only | current |
| acdPaaResultOneWayDvPrevMaxValue OBJECT-TYPE Indicates the previous One-way delay variation maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.19 | Integer32 | read-only | current |
| acdPaaResultOneWayDvPrevAvgValue OBJECT-TYPE Indicates the previous One-way delay variation average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.20 | Integer32 | read-only | current |
| acdPaaResultOneWayDvPrevThreshEx OBJECT-TYPE Indicates the previous number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.21 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDelayInstValue OBJECT-TYPE Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.22 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayCurrValid OBJECT-TYPE Indicates the validity of the current Two-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.23 | TruthValue | read-only | current |
| acdPaaResultTwoWayDelayCurrMinValue OBJECT-TYPE Indicates the current Two-way delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.24 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayCurrMaxValue OBJECT-TYPE Indicates the current Two-way delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.25 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayCurrAvgValue OBJECT-TYPE Indicates the current Two-way delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.26 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayCurrThreshEx OBJECT-TYPE Indicates the current number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.27 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDelayPrevValid OBJECT-TYPE Indicates the validity of the previous Two-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.28 | TruthValue | read-only | current |
| acdPaaResultTwoWayDelayPrevMinValue OBJECT-TYPE Indicates the previous Two-way delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.29 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayPrevMaxValue OBJECT-TYPE Indicates the previous Two-way delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.30 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayPrevAvgValue OBJECT-TYPE Indicates the previous Two-way delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.31 | Integer32 | read-only | current |
| acdPaaResultTwoWayDelayPrevThreshEx OBJECT-TYPE Indicates the previous number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.32 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDvInstValue OBJECT-TYPE Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.33 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvCurrValid OBJECT-TYPE Indicates the validity of the current Two-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.34 | TruthValue | read-only | current |
| acdPaaResultTwoWayDvCurrMinValue OBJECT-TYPE Indicates the current Two-way delay variation minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.35 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvCurrMaxValue OBJECT-TYPE Indicates the current Two-way delay variation maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.36 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvCurrAvgValue OBJECT-TYPE Indicates the current Two-way delay variation average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.37 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvCurrThreshEx OBJECT-TYPE Indicates the current number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.38 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDvPrevValid OBJECT-TYPE Indicates the validity of the previous Two-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.39 | TruthValue | read-only | current |
| acdPaaResultTwoWayDvPrevMinValue OBJECT-TYPE Indicates the previous Two-way delay variation minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.40 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvPrevMaxValue OBJECT-TYPE Indicates the previous Two-way delay variation maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.41 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvPrevAvgValue OBJECT-TYPE Indicates the previous Two-way delay variation average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.42 | Integer32 | read-only | current |
| acdPaaResultTwoWayDvPrevThreshEx OBJECT-TYPE Indicates the previous number of samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.43 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDelayInstValue OBJECT-TYPE Indicate the One-way delay instantaneous value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.44 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayCurrValid OBJECT-TYPE Indicate the validity of the current One-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.45 | TruthValue | read-only | current |
| acdPaaResultOneWayDelayCurrMinValue OBJECT-TYPE Indicate the current One-way delay minimum value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.46 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayCurrMaxValue OBJECT-TYPE Indicate the current One-way delay maximum value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.47 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayCurrAvgValue OBJECT-TYPE Indicate the current One-way delay average value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.48 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayCurrThreshEx OBJECT-TYPE Indicate the current number of sample exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.49 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDelayPrevValid OBJECT-TYPE Indicate the validity of the previous One-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.50 | TruthValue | read-only | current |
| acdPaaResultOneWayDelayPrevMinValue OBJECT-TYPE Indicate the previous One-way delay minimum value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.51 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayPrevMaxValue OBJECT-TYPE Indicate the previous One-way delay maximum value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.52 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayPrevAvgValue OBJECT-TYPE Indicate the previous One-way delay average value. The value is express in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.53 | Integer32 | read-only | current |
| acdPaaResultOneWayDelayPrevThreshEx OBJECT-TYPE Indicate the previous number of sample exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.54 | Unsigned32 | read-only | current |
| acdPaaResultPktLossTime OBJECT-TYPE Indicates the time when the current packet loss results were moved to the previous packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.55 | DateAndTime | read-only | current |
| acdPaaResultOneWayTime OBJECT-TYPE Indicates the time when the current one-way results were moved to the previous one-way results. | 1.3.6.1.4.1.22420.2.5.1.1.56 | DateAndTime | read-only | current |
| acdPaaResultTwoWayTime OBJECT-TYPE Indicates the time when the current two-way results were moved to the previous two-way results. | 1.3.6.1.4.1.22420.2.5.1.1.57 | DateAndTime | read-only | current |
| acdPaaResultPktLossNeCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period near-end packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.58 | Unsigned32 | read-only | current |
| acdPaaResultPktLossNePrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period near-end packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.59 | Unsigned32 | read-only | current |
| acdPaaResultPktLossFeCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period far-end packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.60 | Unsigned32 | read-only | current |
| acdPaaResultPktLossFePrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period far-end packet loss results. | 1.3.6.1.4.1.22420.2.5.1.1.61 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDelayCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period one-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.62 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDelayPrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period one-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.63 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDvCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period one-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.64 | Unsigned32 | read-only | current |
| acdPaaResultOneWayDvPrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period one-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.65 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDelayCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period two-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.66 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDelayPrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period two-way delay results. | 1.3.6.1.4.1.22420.2.5.1.1.67 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDvCurrSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the current period two-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.68 | Unsigned32 | read-only | current |
| acdPaaResultTwoWayDvPrevSamples OBJECT-TYPE Indicates the number of samples gathered to calculate the previous period two-way delay variation results. | 1.3.6.1.4.1.22420.2.5.1.1.69 | Unsigned32 | read-only | current |
| acdPaaResultIgmpJoinDelayInstValue OBJECT-TYPE Indicates the IGMP Join delay instantaneous value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.70 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayCurrValid OBJECT-TYPE Indicates the validity of the current IGMP Join delay results. | 1.3.6.1.4.1.22420.2.5.1.1.71 | TruthValue | read-only | current |
| acdPaaResultIgmpJoinDelayCurrMinValue OBJECT-TYPE Indicates the current IGMP Join delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.72 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayCurrMaxValue OBJECT-TYPE Indicates the current IGMP Join delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.73 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayCurrAvgValue OBJECT-TYPE Indicates the current IGMP Join delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.74 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayCurrThreshEx OBJECT-TYPE Indicates the current number of IGMP Join samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.75 | Unsigned32 | read-only | current |
| acdPaaResultIgmpJoinDelayPrevValid OBJECT-TYPE Indicates the validity of the previous IGMP Join delay results. | 1.3.6.1.4.1.22420.2.5.1.1.76 | TruthValue | read-only | current |
| acdPaaResultIgmpJoinDelayPrevMinValue OBJECT-TYPE Indicates the previous IGMP Join delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.77 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayPrevMaxValue OBJECT-TYPE Indicates the previous IGMP Join delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.78 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayPrevAvgValue OBJECT-TYPE Indicates the previous IGMP Join delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.79 | Integer32 | read-only | current |
| acdPaaResultIgmpJoinDelayPrevThreshEx OBJECT-TYPE Indicates the previous number of IGMP Join samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.80 | Unsigned32 | read-only | current |
| acdPaaResultIgmpLeaveDelayInstValue OBJECT-TYPE Indicates the IGMP Leave delay instantaneous value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.81 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrValid OBJECT-TYPE Indicates the validity of the current IGMP Leave delay results. | 1.3.6.1.4.1.22420.2.5.1.1.82 | TruthValue | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrMinValue OBJECT-TYPE Indicates the current IGMP Leave delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.83 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrMaxValue OBJECT-TYPE Indicates the current IGMP Leave delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.84 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrAvgValue OBJECT-TYPE Indicates the current IGMP Leave delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.85 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrThreshEx OBJECT-TYPE Indicates the current number of IGMP Leave samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.86 | Unsigned32 | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevValid OBJECT-TYPE Indicates the validity of the previous IGMP Leave delay results. | 1.3.6.1.4.1.22420.2.5.1.1.87 | TruthValue | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevMinValue OBJECT-TYPE Indicates the previous IGMP Leave delay minimum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.88 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevMaxValue OBJECT-TYPE Indicates the previous IGMP Leave delay maximum value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.89 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevAvgValue OBJECT-TYPE Indicates the previous IGMP Leave delay average value. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.1.1.90 | Integer32 | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevThreshEx OBJECT-TYPE Indicates the previous number of IGMP Leave samples exceeding the limit. | 1.3.6.1.4.1.22420.2.5.1.1.91 | Unsigned32 | read-only | current |
| acdPaaResultIgmpJoinDelayTime OBJECT-TYPE Indicates the time when the current IGMP Join delay results were moved to the previous IGMP join delay results. | 1.3.6.1.4.1.22420.2.5.1.1.92 | DateAndTime | read-only | current |
| acdPaaResultIgmpLeaveDelayTime OBJECT-TYPE Indicates the time when the current IGMP Leave results were moved to the previous IGMP Leave results. | 1.3.6.1.4.1.22420.2.5.1.1.93 | DateAndTime | read-only | current |
| acdPaaResultIgmpJoinDelayCurrSamples OBJECT-TYPE Indicates the number of IGMP Join samples gathered to calculate the current period IGMP Join delay results. | 1.3.6.1.4.1.22420.2.5.1.1.94 | Unsigned32 | read-only | current |
| acdPaaResultIgmpJoinDelayPrevSamples OBJECT-TYPE Indicates the number of IGMP Join samples gathered to calculate the previous period IGMP Join delay results. | 1.3.6.1.4.1.22420.2.5.1.1.95 | Unsigned32 | read-only | current |
| acdPaaResultIgmpLeaveDelayCurrSamples OBJECT-TYPE Indicates the number of IGMP Leave samples gathered to calculate the current period IGMP Leave delay results. | 1.3.6.1.4.1.22420.2.5.1.1.96 | Unsigned32 | read-only | current |
| acdPaaResultIgmpLeaveDelayPrevSamples OBJECT-TYPE Indicates the number of IGMP Leave samples gathered to calculate the previous period IGMP Leave delay results. | 1.3.6.1.4.1.22420.2.5.1.1.97 | Unsigned32 | read-only | current |
| acdPaaResultPktLossCurrGaps OBJECT-TYPE Indicates the number of gaps that occured in the current period. | 1.3.6.1.4.1.22420.2.5.1.1.98 | Unsigned32 | read-only | current |
| acdPaaResultPktLossPrevGaps OBJECT-TYPE Indicates the number of gaps that occured in the previous period. | 1.3.6.1.4.1.22420.2.5.1.1.99 | Unsigned32 | read-only | current |
| acdPaaResultPktLossCurrLargestGap OBJECT-TYPE Indicates the size of the largest gap that occured in the current period. | 1.3.6.1.4.1.22420.2.5.1.1.100 | Unsigned32 | read-only | current |
| acdPaaResultPktLossPrevLargestGap OBJECT-TYPE Indicates the size of the largest gap that occured in the previous period. | 1.3.6.1.4.1.22420.2.5.1.1.101 | Unsigned32 | read-only | current |
| acdPaaResultPktLossNeCurrValueExt OBJECT-TYPE Extended near-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.102 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaResultPktLossNePrevValueExt OBJECT-TYPE Extended near-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.103 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaResultPktLossFeCurrValueExt OBJECT-TYPE Extended far-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.104 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaResultPktLossFePrevValueExt OBJECT-TYPE Extended far-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.1.1.105 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaResultPktLossNeCurrNbrLoss OBJECT-TYPE Indicates the current period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNeCurrSamples. | 1.3.6.1.4.1.22420.2.5.1.1.106 | Unsigned32 | read-only | current |
| acdPaaResultPktLossNePrevNbrLoss OBJECT-TYPE Indicates the previous period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNePrevSamples. | 1.3.6.1.4.1.22420.2.5.1.1.107 | Unsigned32 | read-only | current |
| acdPaaResultPktLossFeCurrNbrLoss OBJECT-TYPE Indicates the current period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFeCurrSamples. | 1.3.6.1.4.1.22420.2.5.1.1.108 | Unsigned32 | read-only | current |
| acdPaaResultPktLossFePrevNbrLoss OBJECT-TYPE Indicates the previous period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFePrevSamples. | 1.3.6.1.4.1.22420.2.5.1.1.109 | Unsigned32 | read-only | current |
| acdPaaStatusTable OBJECT-TYPE Status table of all Paa entries | 1.3.6.1.4.1.22420.2.5.2 | not-accessible | current | |
| acdPaaStatusEntry OBJECT-TYPE An entry consisting of the status for a PAA instance. | 1.3.6.1.4.1.22420.2.5.2.1 | not-accessible | current | |
| acdPaaStatusID OBJECT-TYPE Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.2.1.1 | Unsigned32 | not-accessible | current |
| acdPaaStatusCcAlert OBJECT-TYPE Indicates the presence of the Connectivity Check alert. | 1.3.6.1.4.1.22420.2.5.2.1.2 | TruthValue | read-only | current |
| acdPaaStatusPktLossAlert OBJECT-TYPE Indicates the presence of the Packet Loss alert. | 1.3.6.1.4.1.22420.2.5.2.1.3 | TruthValue | read-only | current |
| acdPaaStatusOneWayDvAlert OBJECT-TYPE Indicates the presence of the One-way Delay Variation alert. | 1.3.6.1.4.1.22420.2.5.2.1.4 | TruthValue | read-only | current |
| acdPaaStatusOneWayAvgDvAlert OBJECT-TYPE Indicates the presence of the One-way Average Delay Variation alert. | 1.3.6.1.4.1.22420.2.5.2.1.5 | TruthValue | read-only | current |
| acdPaaStatusTwoWayDelayAlert OBJECT-TYPE Indicates the presence of the Two-way Delay alert. | 1.3.6.1.4.1.22420.2.5.2.1.6 | TruthValue | read-only | current |
| acdPaaStatusTwoWayAvgDelayAlert OBJECT-TYPE Indicates the presence of the Two-way Average Delay alert. | 1.3.6.1.4.1.22420.2.5.2.1.7 | TruthValue | read-only | current |
| acdPaaStatusTwoWayDvAlert OBJECT-TYPE Indicates the presence of the Two-way Delay Variation alert. | 1.3.6.1.4.1.22420.2.5.2.1.8 | TruthValue | read-only | current |
| acdPaaStatusTwoWayAvgDvAlert OBJECT-TYPE Indicates the presence of the Two-way Average Delay Variation alert. | 1.3.6.1.4.1.22420.2.5.2.1.9 | TruthValue | read-only | current |
| acdPaaStatusOneWayDelayAlert OBJECT-TYPE Indicate the presence of the One Way Delay alert. | 1.3.6.1.4.1.22420.2.5.2.1.10 | TruthValue | read-only | current |
| acdPaaStatusOneWayAvgDelayAlert OBJECT-TYPE Indicate the presence of the One Way Average Delay alert. | 1.3.6.1.4.1.22420.2.5.2.1.11 | TruthValue | read-only | current |
| acdPaaStatusState OBJECT-TYPE Paa instance state. | 1.3.6.1.4.1.22420.2.5.2.1.12 | INTEGER {disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6)} | read-only | current |
| acdPaaStatusPeerAddress OBJECT-TYPE The peer address. Dynamically resolved or statically configured. | 1.3.6.1.4.1.22420.2.5.2.1.13 | DisplayString (SIZE(0..32)) | read-only | current |
| acdPaaUdpCfgTable OBJECT-TYPE Configuration table of all UDP PAA entries. | 1.3.6.1.4.1.22420.2.5.3 | not-accessible | current | |
| acdPaaUdpCfgEntry OBJECT-TYPE An entry consisting of all settings to manage a PAA instance. | 1.3.6.1.4.1.22420.2.5.3.1 | not-accessible | current | |
| acdPaaUdpCfgID OBJECT-TYPE Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.3.1.1 | Unsigned32 | not-accessible | current |
| acdPaaUdpCfgName OBJECT-TYPE This is a string to identify this PAA instance. | 1.3.6.1.4.1.22420.2.5.3.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| acdPaaUdpCfgState OBJECT-TYPE Configuration state of this PAA entry. | 1.3.6.1.4.1.22420.2.5.3.1.3 | INTEGER {enable(0), disable(1)} | read-write | current |
| acdPaaUdpCfgPktSize OBJECT-TYPE Transmit packet size. | 1.3.6.1.4.1.22420.2.5.3.1.4 | Unsigned32 | read-write | current |
| acdPaaUdpCfgSamplingPeriod OBJECT-TYPE Interval in milliseconds at which PAA issues PAA measurement packets. | 1.3.6.1.4.1.22420.2.5.3.1.5 | Unsigned32 | read-write | current |
| acdPaaUdpCfgCcLossThresh OBJECT-TYPE Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss. | 1.3.6.1.4.1.22420.2.5.3.1.6 | Unsigned32 | read-write | current |
| acdPaaUdpCfgPktLossRefPeriod OBJECT-TYPE Reference period in milliseconds for packet loss measurement. | 1.3.6.1.4.1.22420.2.5.3.1.7 | Unsigned32 | read-write | current |
| acdPaaUdpCfgPktLossThresh OBJECT-TYPE Allowed packet loss, in pecentage (%). | 1.3.6.1.4.1.22420.2.5.3.1.8 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayRefPeriod OBJECT-TYPE Reference period in milliseconds for one-way measurement. | 1.3.6.1.4.1.22420.2.5.3.1.9 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayDvMax OBJECT-TYPE Maximum allowed instantaneous delay variation. | 1.3.6.1.4.1.22420.2.5.3.1.10 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayDvThresh OBJECT-TYPE Number of consecutive delay variations greater than the threshold. | 1.3.6.1.4.1.22420.2.5.3.1.11 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayAvgDvThresh OBJECT-TYPE One-way average delay variation threshold. | 1.3.6.1.4.1.22420.2.5.3.1.12 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayRefPeriod OBJECT-TYPE Reference period in milliseconds for two-way measurement. | 1.3.6.1.4.1.22420.2.5.3.1.13 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayDelayMax OBJECT-TYPE Maximum allowed instantaneous delay. | 1.3.6.1.4.1.22420.2.5.3.1.14 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayDelayThresh OBJECT-TYPE Number of consecutive delays greater than the threshold. | 1.3.6.1.4.1.22420.2.5.3.1.15 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayAvgDelayThresh OBJECT-TYPE Two-way average delay threshold. | 1.3.6.1.4.1.22420.2.5.3.1.16 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayDvMax OBJECT-TYPE Maximum allowed instantaneous delay variation. | 1.3.6.1.4.1.22420.2.5.3.1.17 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayDvThresh OBJECT-TYPE Number of consecutive delay variations greater than the threshold. | 1.3.6.1.4.1.22420.2.5.3.1.18 | Unsigned32 | read-write | current |
| acdPaaUdpCfgTwoWayAvgDvThresh OBJECT-TYPE Two-way average delay variation threshold. | 1.3.6.1.4.1.22420.2.5.3.1.19 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIPv4DstAddr OBJECT-TYPE The destination IP address used to reach the peer PAA instance. | 1.3.6.1.4.1.22420.2.5.3.1.20 | IpAddress | read-write | current |
| acdPaaUdpCfgPortNumber OBJECT-TYPE The source UDP port number on which to listen for peer PAA samples. | 1.3.6.1.4.1.22420.2.5.3.1.21 | Unsigned32 | read-write | current |
| acdPaaUdpCfgDscpValue OBJECT-TYPE The DSCP value used to reach the peer PAA instance. Its value ranges from 0 to 64. | 1.3.6.1.4.1.22420.2.5.3.1.22 | Unsigned32 | read-write | current |
| acdPaaUdpCfgVlan1PbitsValue OBJECT-TYPE The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7. | 1.3.6.1.4.1.22420.2.5.3.1.23 | Unsigned32 | read-write | current |
| acdPaaUdpCfgVlan2PbitsValue OBJECT-TYPE The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7. | 1.3.6.1.4.1.22420.2.5.3.1.24 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayDelayMax OBJECT-TYPE Maximum allowed instantaneous delay. | 1.3.6.1.4.1.22420.2.5.3.1.25 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayDelayThresh OBJECT-TYPE Nbr consecutive delay > max before alert. | 1.3.6.1.4.1.22420.2.5.3.1.26 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOneWayAvgDelayThresh OBJECT-TYPE Two-way average delay threshold. | 1.3.6.1.4.1.22420.2.5.3.1.27 | Unsigned32 | read-write | current |
| acdPaaUdpCfgDestinationPortNumber OBJECT-TYPE The destination UDP port number used to reach the peer PAA instance. | 1.3.6.1.4.1.22420.2.5.3.1.28 | Unsigned32 | read-write | current |
| acdPaaUdpCfgPeerID OBJECT-TYPE Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.3.1.29 | Unsigned32 | read-write | current |
| acdPaaUdpCfgOperationMode OBJECT-TYPE PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink | 1.3.6.1.4.1.22420.2.5.3.1.30 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpOneWayJoinPeriod OBJECT-TYPE The IGMP One-way join period is the amount of time to wait from the beginning of the period before an IGMP join request is sent out. | 1.3.6.1.4.1.22420.2.5.3.1.31 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpRefPeriod OBJECT-TYPE The IGMP reference period is the total amount of time in which we sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period). | 1.3.6.1.4.1.22420.2.5.3.1.32 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpMaxJoinDly OBJECT-TYPE The maximum join delay objective. | 1.3.6.1.4.1.22420.2.5.3.1.33 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpJoinDlyThres OBJECT-TYPE The maximum consecutive join delay samples allowed greater than the maximum join delay. | 1.3.6.1.4.1.22420.2.5.3.1.34 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpJoinAvgDlyThres OBJECT-TYPE The maximum join average delay. | 1.3.6.1.4.1.22420.2.5.3.1.35 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpMaxLvDly OBJECT-TYPE The maximum join delay objective. | 1.3.6.1.4.1.22420.2.5.3.1.36 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpLvDlyThresh OBJECT-TYPE The maximum consecutive leave delay samples allowed greater than the maximum leave delay. | 1.3.6.1.4.1.22420.2.5.3.1.37 | Unsigned32 | read-write | current |
| acdPaaUdpCfgIgmpLvAvgDlyThresh OBJECT-TYPE The maximum leave delay average. | 1.3.6.1.4.1.22420.2.5.3.1.38 | Unsigned32 | read-write | current |
| acdPaaUdpCfgPktLossThreshExt OBJECT-TYPE Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.3.1.39 | Unsigned32 (0..100000000) | read-write | current |
| acdPaaL2CfgTable OBJECT-TYPE Configuration table of all L2 PAA entries | 1.3.6.1.4.1.22420.2.5.4 | not-accessible | current | |
| acdPaaL2CfgEntry OBJECT-TYPE An entry consisting of all settings to manage a PAA instance. | 1.3.6.1.4.1.22420.2.5.4.1 | not-accessible | current | |
| acdPaaL2CfgID OBJECT-TYPE Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.4.1.1 | Unsigned32 | not-accessible | current |
| acdPaaL2CfgName OBJECT-TYPE This is a string to identify this PAA instance. | 1.3.6.1.4.1.22420.2.5.4.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| acdPaaL2CfgState OBJECT-TYPE Configuration state of this PAA entry. | 1.3.6.1.4.1.22420.2.5.4.1.3 | INTEGER {enable(0), disable(1)} | read-write | current |
| acdPaaL2CfgPktSize OBJECT-TYPE Transmit packet size. | 1.3.6.1.4.1.22420.2.5.4.1.4 | Unsigned32 | read-write | current |
| acdPaaL2CfgSamplingPeriod OBJECT-TYPE Interval in milliseconds at which PAA issues PAA measurement packets. | 1.3.6.1.4.1.22420.2.5.4.1.5 | Unsigned32 | read-write | current |
| acdPaaL2CfgCcLossThresh OBJECT-TYPE Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss. | 1.3.6.1.4.1.22420.2.5.4.1.6 | Unsigned32 | read-write | current |
| acdPaaL2CfgPktLossRefPeriod OBJECT-TYPE Reference period in milliseconds for packet loss measurement. | 1.3.6.1.4.1.22420.2.5.4.1.7 | Unsigned32 | read-write | current |
| acdPaaL2CfgPktLossThresh OBJECT-TYPE Allowed packet loss, in percentage (%). | 1.3.6.1.4.1.22420.2.5.4.1.8 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayRefPeriod OBJECT-TYPE Reference period in milliseconds for one-way measurement. | 1.3.6.1.4.1.22420.2.5.4.1.9 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayDvMax OBJECT-TYPE Maximum allowed instantaneous delay variation. | 1.3.6.1.4.1.22420.2.5.4.1.10 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayDvThresh OBJECT-TYPE Number of consecutive delay variations greater than the threshold. | 1.3.6.1.4.1.22420.2.5.4.1.11 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayAvgDvThresh OBJECT-TYPE One-way average delay variation threshold. | 1.3.6.1.4.1.22420.2.5.4.1.12 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayRefPeriod OBJECT-TYPE Reference period in milliseconds for two-way measurement. | 1.3.6.1.4.1.22420.2.5.4.1.13 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayDelayMax OBJECT-TYPE Maximum allowed instantaneous delay. | 1.3.6.1.4.1.22420.2.5.4.1.14 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayDelayThresh OBJECT-TYPE Number of consecutive delays greater than the threshold. | 1.3.6.1.4.1.22420.2.5.4.1.15 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayAvgDelayThresh OBJECT-TYPE Two-way average delay threshold. | 1.3.6.1.4.1.22420.2.5.4.1.16 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayDvMax OBJECT-TYPE Maximum allowed instantaneous delay variation. | 1.3.6.1.4.1.22420.2.5.4.1.17 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayDvThresh OBJECT-TYPE Number of consecutive delay variations greater than the threshold. | 1.3.6.1.4.1.22420.2.5.4.1.18 | Unsigned32 | read-write | current |
| acdPaaL2CfgTwoWayAvgDvThresh OBJECT-TYPE Two-way average delay variation threshold. | 1.3.6.1.4.1.22420.2.5.4.1.19 | Unsigned32 | read-write | current |
| acdPaaL2CfgPortName OBJECT-TYPE The Port Name used to reach the peer PAA instance. | 1.3.6.1.4.1.22420.2.5.4.1.20 | DisplayString (SIZE(1..32)) | read-write | current |
| acdPaaL2CfgMacDst OBJECT-TYPE The MAC address used to reach the peer PAA instance. | 1.3.6.1.4.1.22420.2.5.4.1.21 | MacAddress | read-write | current |
| acdPaaL2CfgEtype OBJECT-TYPE The Ethernet type used for this PAA instance. | 1.3.6.1.4.1.22420.2.5.4.1.22 | Unsigned32 | read-write | current |
| acdPaaL2CfgVlan1IdEn OBJECT-TYPE Enable or disable the first VLAN ID check | 1.3.6.1.4.1.22420.2.5.4.1.23 | TruthValue | read-write | current |
| acdPaaL2CfgVlan1Id OBJECT-TYPE The first VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095. | 1.3.6.1.4.1.22420.2.5.4.1.24 | Unsigned32 | read-write | current |
| acdPaaL2CfgVlan2IdEn OBJECT-TYPE Enable or disable the second VLAN ID check | 1.3.6.1.4.1.22420.2.5.4.1.25 | TruthValue | read-write | current |
| acdPaaL2CfgVlan2Id OBJECT-TYPE The second VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095. | 1.3.6.1.4.1.22420.2.5.4.1.26 | Unsigned32 | read-write | current |
| acdPaaL2CfgVlan1PbitsValue OBJECT-TYPE The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7. | 1.3.6.1.4.1.22420.2.5.4.1.27 | Unsigned32 | read-write | current |
| acdPaaL2CfgVlan2PbitsValue OBJECT-TYPE The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7. | 1.3.6.1.4.1.22420.2.5.4.1.28 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayDelayMax OBJECT-TYPE Maximum allowed instantaneous delay. | 1.3.6.1.4.1.22420.2.5.4.1.29 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayDelayThresh OBJECT-TYPE Nbr consecutive delay > max before alert. | 1.3.6.1.4.1.22420.2.5.4.1.30 | Unsigned32 | read-write | current |
| acdPaaL2CfgOneWayAvgDelayThresh OBJECT-TYPE One-way average delay threshold. | 1.3.6.1.4.1.22420.2.5.4.1.31 | Unsigned32 | read-write | current |
| acdPaaL2CfgPeerID OBJECT-TYPE Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.4.1.32 | Unsigned32 | read-write | current |
| acdPaaL2CfgOperationMode OBJECT-TYPE PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink | 1.3.6.1.4.1.22420.2.5.4.1.33 | Unsigned32 | read-write | current |
| acdPaaL2CfgPktLossThreshExt OBJECT-TYPE Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.4.1.34 | Unsigned32 (0..100000000) | read-write | current |
| acdPaaHistResultTable OBJECT-TYPE Result table of all Paa entries | 1.3.6.1.4.1.22420.2.5.5 | not-accessible | current | |
| acdPaaHistResultEntry OBJECT-TYPE An entry consisting of results for a PAA instance for a specific periodin time. | 1.3.6.1.4.1.22420.2.5.5.1 | not-accessible | current | |
| acdPaaHistResultID OBJECT-TYPE Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). | 1.3.6.1.4.1.22420.2.5.5.1.1 | Unsigned32 | not-accessible | current |
| acdPaaHistResultSampleIndex OBJECT-TYPE An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PAA instance. This index starts at 1 and increases by one as each new sample. | 1.3.6.1.4.1.22420.2.5.5.1.2 | Unsigned32 | not-accessible | current |
| acdPaaHistResultStatus OBJECT-TYPE The status of this acdPaaHistResult entry. | 1.3.6.1.4.1.22420.2.5.5.1.3 | INTEGER {valid(1), invalid(2)} | read-only | current |
| acdPaaHistResultDuration OBJECT-TYPE The interval in seconds over which the data is sampled for this entry. | 1.3.6.1.4.1.22420.2.5.5.1.4 | Unsigned32 | read-only | current |
| acdPaaHistResultIntervalEnd OBJECT-TYPE This is the time of the end of this entry. | 1.3.6.1.4.1.22420.2.5.5.1.5 | DateAndTime | read-only | current |
| acdPaaHistResultPktLossNeValid OBJECT-TYPE Indicates the validity of the Near-end packet loss results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.6 | TruthValue | read-only | current |
| acdPaaHistResultPktLossNeSamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate the Near-end packet loss. | 1.3.6.1.4.1.22420.2.5.5.1.7 | Unsigned32 | read-only | current |
| acdPaaHistResultPktLossNeValue OBJECT-TYPE Indicates the Near-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent. | 1.3.6.1.4.1.22420.2.5.5.1.8 | Unsigned32 (0..10000) | read-only | current |
| acdPaaHistResultPktLossFeValid OBJECT-TYPE Indicates the validity of the Far-end packet loss results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.9 | TruthValue | read-only | current |
| acdPaaHistResultPktLossFeSamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate the Far-end packet loss. | 1.3.6.1.4.1.22420.2.5.5.1.10 | Unsigned32 | read-only | current |
| acdPaaHistResultPktLossFeValue OBJECT-TYPE Indicates the Far-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent. | 1.3.6.1.4.1.22420.2.5.5.1.11 | Unsigned32 (0..10000) | read-only | current |
| acdPaaHistResultOneWayDelayValid OBJECT-TYPE Indicate the validity of the One-way delay results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.12 | TruthValue | read-only | current |
| acdPaaHistResultOneWayDelaySamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate One-way delay results. | 1.3.6.1.4.1.22420.2.5.5.1.13 | Unsigned32 | read-only | current |
| acdPaaHistResultOneWayDelayMinValue OBJECT-TYPE Indicate the One-way delay minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.14 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDelayMaxValue OBJECT-TYPE Indicate the One-way delay maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.15 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDelayAvgValue OBJECT-TYPE Indicate the One-way delay average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.16 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDelayThreshEx OBJECT-TYPE Indicate the number of sample exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.17 | Unsigned32 | read-only | current |
| acdPaaHistResultOneWayDvValid OBJECT-TYPE Indicates the validity of the One-way delay variation results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.18 | TruthValue | read-only | current |
| acdPaaHistResultOneWayDvSamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results. | 1.3.6.1.4.1.22420.2.5.5.1.19 | Unsigned32 | read-only | current |
| acdPaaHistResultOneWayDvMinValue OBJECT-TYPE Indicates the One-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.20 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDvMaxValue OBJECT-TYPE Indicates the One-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.21 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDvAvgValue OBJECT-TYPE Indicates the One-way delay variation average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.22 | Integer32 | read-only | current |
| acdPaaHistResultOneWayDvThreshEx OBJECT-TYPE Indicates the number of samples exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.23 | Unsigned32 | read-only | current |
| acdPaaHistResultTwoWayDelayValid OBJECT-TYPE Indicates the validity of the Two-way delay results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.24 | TruthValue | read-only | current |
| acdPaaHistResultTwoWayDelaySamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results. | 1.3.6.1.4.1.22420.2.5.5.1.25 | Unsigned32 | read-only | current |
| acdPaaHistResultTwoWayDelayMinValue OBJECT-TYPE Indicates the Two-way delay minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.26 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDelayMaxValue OBJECT-TYPE Indicates the Two-way delay maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.27 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDelayAvgValue OBJECT-TYPE Indicates the Two-way delay average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.28 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDelayThreshEx OBJECT-TYPE Indicates the number of samples exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.29 | Unsigned32 | read-only | current |
| acdPaaHistResultTwoWayDvValid OBJECT-TYPE Indicates the validity of the Two-way delay variation results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.30 | TruthValue | read-only | current |
| acdPaaHistResultTwoWayDvSamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results. | 1.3.6.1.4.1.22420.2.5.5.1.31 | Unsigned32 | read-only | current |
| acdPaaHistResultTwoWayDvMinValue OBJECT-TYPE Indicates the Two-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.32 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDvMaxValue OBJECT-TYPE Indicates the Two-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.33 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDvAvgValue OBJECT-TYPE Indicates the Two-way delay variation average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.34 | Integer32 | read-only | current |
| acdPaaHistResultTwoWayDvThreshEx OBJECT-TYPE Indicates the number of samples exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.35 | Unsigned32 | read-only | current |
| acdPaaHistResultIgmpJoinDelayValid OBJECT-TYPE Indicates the validity of the IGMP Join delay results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.36 | TruthValue | read-only | current |
| acdPaaHistResultIgmpJoinDelaySamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate IGMP Join delay results. | 1.3.6.1.4.1.22420.2.5.5.1.37 | Unsigned32 | read-only | current |
| acdPaaHistResultIgmpJoinDelayMinValue OBJECT-TYPE Indicates the IGMP Join delay minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.38 | Integer32 | read-only | current |
| acdPaaHistResultIgmpJoinDelayMaxValue OBJECT-TYPE Indicates the IGMP Join delay maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.39 | Integer32 | read-only | current |
| acdPaaHistResultIgmpJoinDelayAvgValue OBJECT-TYPE Indicates the IGMP Join delay average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.40 | Integer32 | read-only | current |
| acdPaaHistResultIgmpJoinDelayThreshEx OBJECT-TYPE Indicates the number of IGMP Join samples exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.41 | Unsigned32 | read-only | current |
| acdPaaHistResultIgmpLeaveDelayValid OBJECT-TYPE Indicates the validity of the IGMP Leave delay results during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.42 | TruthValue | read-only | current |
| acdPaaHistResultIgmpLeaveDelaySamples OBJECT-TYPE Indicates the number of samples gathered during the sampling interval to calculate IGMP Leave delay results. | 1.3.6.1.4.1.22420.2.5.5.1.43 | Unsigned32 | read-only | current |
| acdPaaHistResultIgmpLeaveDelayMinValue OBJECT-TYPE Indicates the IGMP Leave delay minimum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.44 | Integer32 | read-only | current |
| acdPaaHistResultIgmpLeaveDelayMaxValue OBJECT-TYPE Indicates the IGMP Leave delay maximum value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.45 | Integer32 | read-only | current |
| acdPaaHistResultIgmpLeaveDelayAvgValue OBJECT-TYPE Indicates the IGMP Leave delay average value during this sampling interval. The value is expressed in micro-seconds. | 1.3.6.1.4.1.22420.2.5.5.1.46 | Integer32 | read-only | current |
| acdPaaHistResultIgmpLeaveDelayThreshEx OBJECT-TYPE Indicates the number of IGMP Leave samples exceeding the limit during this sampling interval. | 1.3.6.1.4.1.22420.2.5.5.1.47 | Unsigned32 | read-only | current |
| acdPaaHistResultPktLossNeValueExt OBJECT-TYPE Extended near-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.5.1.48 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaHistResultPktLossFeValueExt OBJECT-TYPE Extended far-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). | 1.3.6.1.4.1.22420.2.5.5.1.49 | Unsigned32 (0..100000000) | read-only | current |
| acdPaaHistResultPktLossNeNbrLoss OBJECT-TYPE Indicates the number of near-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples. | 1.3.6.1.4.1.22420.2.5.5.1.50 | Unsigned32 | read-only | current |
| acdPaaHistResultPktLossFeNbrLoss OBJECT-TYPE Indicates the number of far-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples. | 1.3.6.1.4.1.22420.2.5.5.1.51 | Unsigned32 | read-only | current |
| acdPaaNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.5.7 | |||
| acdPaaMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.5.8 | |||
| acdPaaConformance OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.5.9 | |||
| acdPaaCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.5.9.1 | |||
| acdPaaGroups OBJECT-IDENTITY | 1.3.6.1.4.1.22420.2.5.9.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| acdPaaCompliance MODULE-COMPLIANCE The compliance statement for support of the ACD-PAA-MIB module. | 1.3.6.1.4.1.22420.2.5.9.1.1 | current |
| acdPaaResultGroup OBJECT-GROUP Objects for the PAA result Group. | 1.3.6.1.4.1.22420.2.5.9.2.1 | current |
| acdPaaStatusGroup OBJECT-GROUP Objects for the PAA status Group. | 1.3.6.1.4.1.22420.2.5.9.2.2 | current |
| acdPaaUdpCfgGroup OBJECT-GROUP Objects for the PAA UDP configuration Group. | 1.3.6.1.4.1.22420.2.5.9.2.3 | current |
| acdPaaL2CfgGroup OBJECT-GROUP Objects for the PAA L2 configuration Group. | 1.3.6.1.4.1.22420.2.5.9.2.4 | current |
| acdPaaHistResultGroup OBJECT-GROUP Objects for the PAA history result Group. | 1.3.6.1.4.1.22420.2.5.9.2.5 | current |