MIBs Depot

AC-SYSTEM-MIB

Registered at
1.3.6.1.4.1.5003.9.10.10
Last updated
2014-08-20 03:59
Organization
AudioCodes Ltd
Namespace
audiocodes
Source file
AC-SYSTEM-MIB
Digest
sha256:420452b3269ac4103025018b02dda9b17a02dae93ddbff29abe73bd041c340db

Contact

Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com

Imports

FromSymbols
AUDIOCODES-TYPES-MIBacBoardMibs, acGeneric, acProducts, acRegistrations, audioCodes
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, RowPointer, RowStatus, TAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AC-SYSTEM-MIB
AUDIOCODES-TYPES-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
acSystemConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1
acSysControl
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.1
acSysControlProtocolType
OBJECT-TYPE
Defines the control protocol type. Choose either: 0 = None 1 = MGCP 2 = MEGACO 4 = H.323 8 = SIP. Access: Offline. AC INI-Param: MGCONTROLPROTOCOLTYPE
1.3.6.1.4.1.5003.9.10.10.1.1.1INTEGER {controlProtocol-None(0), controlProtocol-MGCP(1), controlProtocol-MEGACO(2), controlProtocol-H323(4), controlProtocol-SIP(8)}read-writecurrent
acSysControlTrunkingToAnalogFunctionalityProfile
OBJECT-TYPE
This parameter defines the Trunking to Analog Functionality Profile. 0 = Disable 1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality Refer to the enumerator acTrunkingToAnalogFunctionalityProfile enum for the possible values. Access: Offline. AC INI-Param: TrunkingToAnalogFunctionalityProfile
1.3.6.1.4.1.5003.9.10.10.1.1.2INTEGER {disable(0), cASAnalog(1)}read-writecurrent
acSysTDM
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.2
acSysTDMClock
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.2.1
acSysTDMClockSource
OBJECT-TYPE
Selects the clock source on which the board synchronizes. 1 = Local oscillator 3 = MVIP 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2 12 = SC2M 13 = SC4M 14 = SC8M 15 = BITS 16 = Network-B 17 = ATM-OC3 18 = ATM-OC3-B 19 = ATM-OC12 20 = Network-DS3-1 21 = Network-DS3-2 22 = Network-DS3-3 Default = 1 TP-1610 = 3 The Paramater is online for TP6310 and TP8410 . For all other boards, the parameter is offline. Access: Online. AC INI-Param: TDMBUSCLOCKSOURCE
1.3.6.1.4.1.5003.9.10.10.1.2.1.1INTEGER {internal(1), mVIP(3), network(4), h110-A(8), h110-B(9), netReference1(10), netReference2(11), sC-2M(12), sC-4M(13), sC-8M(14), bITS(15), network-b(16), aTM-OC3(17), aTM-OC3-B(18), aTM-OC12(19), network-DS3-1(20), network-DS3-2(21), network-DS3-3(22)}read-writecurrent
acSysTDMClockEnableFallBack
OBJECT-TYPE
Defines the auto fallback of the clock. Range: 0 = Manual 1 = Auto Non-Revertive 2 = Auto Revertive. Access: Online. AC INI-Param: TDMBUSENABLEFALLBACK
1.3.6.1.4.1.5003.9.10.10.1.2.1.2INTEGER {manual(0), autoNon-Revertive(1), auto-Revertive(2)}read-writecurrent
acSysTDMClockLocalReference
OBJECT-TYPE
When the clock source is set to Network, this parameter selects the Trunk ID to be used as the clock synchronization source of the board. When using H.110/H.100 bus, this parameter also selects the trunk used as the clock source for the NetRef clock generation (in this case, the clock source must not be set to Network. Range = 0 to (MAX_TRUNK _NUM-1). Access: Online. AC INI-Param: TDMBusLocalReference
1.3.6.1.4.1.5003.9.10.10.1.2.1.3Unsigned32 (0..256)read-writecurrent
acSysTDMClockMasterSlaveSelection
OBJECT-TYPE
Sets SC/MVIP/H.100/H.110 to either: 0 = Slave mode (another board in the system must supply the clock to the TDM bus) or Master mode (the board is the clock source for the TDM bus) or Secondary Master mode (for H100/H110 Bus only). 1 = H110A Master in Master mode 2 = H.110B Master. Access: Online. AC INI-Param: TDMBUSMASTERSLAVESELECTION
1.3.6.1.4.1.5003.9.10.10.1.2.1.4INTEGER {acTDMBusSlaveMode(0), acTDMBusMasterMode(1), acH110BusSecondaryMasterMode(2)}read-writecurrent
acSysTDMClockNetRefSpeed
OBJECT-TYPE
Determines the NetRef frequency (for both generation and synchronization). 0 = 8 kHz 1 = 1.544 MHz 2 = 2.048 MHz. Access: Online. AC INI-Param: TDMBUSNETREFSPEED
1.3.6.1.4.1.5003.9.10.10.1.2.1.5INTEGER {acTH110BusNetRefSpeed-8khz(0), acTH110BusNetRefSpeed-1544khz(1), acTH110BusNetRefSpeed-20488khz(2)}read-writecurrent
acSysTDMClockAutoFallBackEnable
OBJECT-TYPE
Enables or disables the PSTN trunk auto-fallback feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockEnable
1.3.6.1.4.1.5003.9.10.10.1.2.1.6INTEGER {disable(0), enable(1)}read-writecurrent
acSysTDMClockAutoFallBackRevertingEnable
OBJECT-TYPE
Enables/disables the PSTN trunk auto-fallback reverting feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockRevertingEnable
1.3.6.1.4.1.5003.9.10.10.1.2.1.7INTEGER {disable(0), enable(1)}read-writecurrent
acSysTDMClockBitsReference
OBJECT-TYPE
Configures the BITS clock reference when the board source clock is set to BITS and Fallback is set to manual or non-revertive. 1 = REF_1 2 = REF_2. Access: Online. AC INI-Param: TDMBITSClockReference
1.3.6.1.4.1.5003.9.10.10.1.2.1.8Unsigned32 (1..2)read-writecurrent
acSysTDMClockPLLOutOfRange
OBJECT-TYPE
Determines the valid PPM range outside the Stratum 3 standard. This parameter is only relevant for the TP8410 on the Mediant 3000. This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7). Access: Online. AC INI-Param: PLLOutOfRange
1.3.6.1.4.1.5003.9.10.10.1.2.1.9INTEGER {oor-9-2to12ppm(0), oor-40to52ppm(1), oor-100to130ppm(2), oor-64to83ppm(3), oor-13-8to18ppm(4), oor-24-6to32ppm(5), oor-36-6to47-5ppm(6), oor-52to67-5ppm(7)}read-writecurrent
acSysTDMClockFallbackClock
OBJECT-TYPE
Selects the fallback clock source on which board synchronizes in the event of clock failure. 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2. Access: Online. AC INI-Param: TDMBusFallbackClock
1.3.6.1.4.1.5003.9.10.10.1.2.1.10INTEGER {network(4), h110-A(8), h110-B(9), netReference1(10), netReference2(11)}read-writecurrent
acSysTDMBus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.2.2
acSysTDMBusType
OBJECT-TYPE
Selects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board). Range: 0 = acMVIP_BUS 1 = acSC_BUS 2 = acFRAMERS 4 = acH100_BUS 5 = EXT TDM 6 = Analog 8 = SW Pstn Default: TP-1610 and TP-2810 = 2 TPM-1100 = 5 TP-260 = 1. Access: Offline. AC INI-Param: TDMBUSTYPE
1.3.6.1.4.1.5003.9.10.10.1.2.2.1INTEGER {mVIP-BUS(0), sC-BUS(1), uSE-FRAMERS(2), qSLAC-BUS(3), uSE-H110-BUS(4), uSE-EXT-BUS(5), aNALOG-BUS(6), uSE-PSTN-SW-ONLY(8)}read-writecurrent
acSysTDMBusSpeed
OBJECT-TYPE
Selects the TDM bus speed according to the Bus Type as follows: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0 Where: 0 = 2048 kbps 2 = 4096 kbps 3 = 8192 kbps 4 = 16384 kbps Default: TP-260 = 2 All other boards = 3. Access: Offline. AC INI-Param: TDMBUSSPEED
1.3.6.1.4.1.5003.9.10.10.1.2.2.2INTEGER {acTDMBusSpeed-2Mbps(0), acTDMBusSpeed-4Mbps(2), acTDMBusSpeed-8Mbps(3), acTDMBusSpeed-16Mbps(4)}read-writecurrent
acSysTDMBusOutputPort
OBJECT-TYPE
Defines the SC/MVIP/H.100/H.110 output port to be used for the board's channel #0. All other channels then occupy the next timeslots sequentially. Range: 0 to 15 for SC/MVIP 0 to 31 for H.110. Access: Offline. AC INI-Param: TDMBUSOUTPUTPORT
1.3.6.1.4.1.5003.9.10.10.1.2.2.3Unsigned32 (0..31)read-writecurrent
acSysTDMBusOutputStartingChannel
OBJECT-TYPE
Defines the outgoing TDM Timeslot for board's channel #0. The remaining channels are organized sequentially. Access: Offline. AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL
1.3.6.1.4.1.5003.9.10.10.1.2.2.4Unsigned32 (0..127)read-writecurrent
acSysPCM
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.2.3
acSysPCMLawSelect
OBJECT-TYPE
Selects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter). 1 = A-law 3 = Mu-Law. Access: Offline. AC INI-Param: PCMLAWSELECT
1.3.6.1.4.1.5003.9.10.10.1.2.3.1INTEGER {automatic(0), aLaw(1), muLaw(3)}read-writecurrent
acSysPCMIdlePattern
OBJECT-TYPE
Defines the PCM pattern applied to the E1/T1 timeslot (B-channel) when the channel is idle. Default: 0xFF if PCMLawSelect is Mu-Law 0xD5 if PCMLawSelect is A-Law Range = 0x00 to 0xFF. Access: Offline. AC INI-Param: IDLEPCMPATTERN
1.3.6.1.4.1.5003.9.10.10.1.2.3.2Unsigned32 (0..255)read-writecurrent
acSysPCMIdleABCDPattern
OBJECT-TYPE
Defines the ABCD (CAS) pattern to be applied on the signaling bus before it is changed by the user or the PSTN protocol. This is only relevant when using PSTN interface with CAS protocols. Range = 0x0 to 0xF. Access: Offline. AC INI-Param: IDLEABCDPATTERN
1.3.6.1.4.1.5003.9.10.10.1.2.3.3Unsigned32 (0..255)read-writecurrent
acSysPCMSerialPortAuditIntervalMin
OBJECT-TYPE
Interval timeout in minutes, of the Serial Port audit. In case of 0 value, the audit isn't running. Access: Offline. AC INI-Param: SerialPortAuditIntervalMin
1.3.6.1.4.1.5003.9.10.10.1.2.3.4Unsigned32 (0..60)read-writecurrent
acSysNetworkConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3
acSysIP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.1
acSysIPAddress
OBJECT-TYPE
Board IP Address. In human readable form. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.1IpAddressread-writecurrent
acSysIPSubNetAddress
OBJECT-TYPE
Board SubNet Address. In human readable form. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.2IpAddressread-writecurrent
acSysIPDefaultGatewayAddress
OBJECT-TYPE
Default Gateway Address. Board's Default Gateway IP address. In human readable form. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.3IpAddressread-writecurrent
acSysIPDHCPEnable
OBJECT-TYPE
Enables/disables DHCP support. 0 = Disable 1 = Enable After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is enabled, the gateway attempts to obtain its IP address and other network parameters from the DHCP server. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn’t deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. Note: DHCPEnable is a special ‘Hidden’ parameter. Once defined and saved in flash memory, its assigned value doesn’t revert to its default even if the parameter doesn't appear in the INI file. Access: Online. AC INI-Param: DHCPEnable
1.3.6.1.4.1.5003.9.10.10.1.3.1.4INTEGER {disable(0), enable(1)}read-writecurrent
acSysIPDHCPSpeedFactor
OBJECT-TYPE
Controls the DHCP renewal speed. When set to 0, the DHCP lease renewal is disabled. Otherwise, the renewal time is divided by this factor. Some DHCP-enabled routers perform better when set to 4. 0 = Disable DHCP 1 = Normal 2 to 10 = Fast. Access: Offline. AC INI-Param: DHCPSpeedFactor
1.3.6.1.4.1.5003.9.10.10.1.3.1.5Unsigned32 (0..10)read-writecurrent
acSysIPDnsPrimaryServerType
OBJECT-TYPE
This parameter defines the DNS primary server's IP address type. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.6INTEGER {ipv4(1)}read-writecurrent
acSysIPDnsPrimaryServer
OBJECT-TYPE
This parameter defines the DNS primary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSPriServerIP
1.3.6.1.4.1.5003.9.10.10.1.3.1.7IpAddressread-writecurrent
acSysIPDnsSecondaryServerType
OBJECT-TYPE
This parameter defines the DNS secondary server's IP address type. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.8INTEGER {ipv4(1)}read-writecurrent
acSysIPDnsSecondaryServer
OBJECT-TYPE
This parameter defines the DNS secondary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSSecServerIP
1.3.6.1.4.1.5003.9.10.10.1.3.1.9IpAddressread-writecurrent
acSysIPDHCPLeaseRenewalEnable
OBJECT-TYPE
Enables/disables DHCP renewal support. This paramater will only take effect if DHCPEnable = 0. After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is disabled, the gateway will boot from flash. It will then attempt to communicate with the DHCP server to renew the lease. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn’t deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. For cases where the booting the board via DHCP is not desirable, but renewing DHCP leasing is. if DHCPEnable = 1, this paramater will not have any effect. Access: Online. AC INI-Param: EnableDHCPLeaseRenewal
1.3.6.1.4.1.5003.9.10.10.1.3.1.10INTEGER {disable(0), enable(1)}read-writedeprecated
acSysIPWanInterfaceName
OBJECT-TYPE
Sets the WAN interface name to be used by VOIP signalling applications. see CLI documentation for interface name formats. Access: Offline. AC INI-Param: WanInterfaceName
1.3.6.1.4.1.5003.9.10.10.1.3.1.11SnmpAdminString (SIZE(0..38))read-writecurrent
acMultipleIP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.1.30
acMultipleIPEnable
OBJECT-TYPE
Enables the multiple IPs feature. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableMultipleIPs
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.1INTEGER {disable(0), enable(1)}read-writeobsolete
acMultipleIPEnableTPNCPasOAM
OBJECT-TYPE
Sets the TPNCP location on the Operation, Administration and Management (OAM) network, when operating in multiple IPs mode. If this parameter is set and the machine is working in multiple IPs mode, TPNCP is located on the OAM network. 0 = TPNCP on Control network 1 = TPNCP on OAM network. Access: Offline. AC INI-Param: EnableTPNCPasOAM
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.2INTEGER {disable(0), enable(1)}read-writecurrent
acMultipleIPEnableDNSasOAM
OBJECT-TYPE
Sets the location of the DNS. If this parameter is set and the machine is functioning in multiple IPs mode, the DNS is located on the OAM network. If not, the DNS is on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableDNSasOAM
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.3INTEGER {disable(0), enable(1)}read-writecurrent
acMultipleIPEnableNTPasOAM
OBJECT-TYPE
Sets the location of the Network Time Protocol (NTP). If this parameter is set and the machine is functioning in multiple IPs mode, the NTP is located on the OAM network. If not, the NTP is located on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableNTPasOAM
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4INTEGER {disable(0), enable(1)}read-writecurrent
acMultipleIPEnableSCTPasControl
OBJECT-TYPE
Sets the location of the Stream Control Transmission Protocol (SCTP). If this parameter is set and the machine is functioning in multiple IPs mode, the SCTP is located on the control network. If not, the SCTP is located on the OAM network. 0 = Default 1 = Enable. Access: Offline. AC INI-Param: EnableSCTPasControl
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5INTEGER {disable(0), enable(1)}read-writecurrent
acMultipleIPEnableNetwotkSeparation
OBJECT-TYPE
Enables Network Physical Separation. Allows the user to have separate port for each Network. Requires suitable hardware. 0 = Disabled 1 = Enabled. Access: Offline. AC INI-Param: ENABLENETWORKPHYSICALSEPARATION
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.6INTEGER {disable(0), enable(1)}read-writecurrent
acMultipleIPInterfaceTableAction
OBJECT-TYPE
This is an action object. Set this to validateConfiguration(2) when you want the configuration in the acSysInterfaceTable to be validated immediately (as opposed to at reset). done(1) is the default value for any GET on this object. The results of the action should be followed in the syslog. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.7INTEGER {done(1), validateConfiguration(2)}read-writecurrent
acNetworkIPTable
OBJECT-TYPE
IP control table. Enables to add, remove or configure the device's networks.
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21not-accessibleobsolete
acNetworkIPEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1not-accessibleobsolete
acNetworkIPIndex
OBJECT-TYPE
The row's index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1INTEGER {oam(1), media(2), control(3)}not-accessibleobsolete
acNetworkIPIfIndex
OBJECT-TYPE
The row's index in the IF MIB. The IF MIB is not yet supported and so for now this is the same as the ipCidrRouteIfIndex object. 0 = OAM 1 = Media 2 = Control. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2Unsigned32 (0..2)read-onlyobsolete
acNetworkIPLocalIPAddress
OBJECT-TYPE
Sets the IP address of the OAM (Operation, Administration & Management) when operating in multiple IPs mode. Range: Legal IP address Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3IpAddressread-writeobsolete
acNetworkIPLocalSubnetMask
OBJECT-TYPE
Sets the Subnet Mask for the OAM interface, when operating in multiple IPs mode. Range: Legal Subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4IpAddressread-writeobsolete
acNetworkIPLocalDefGW
OBJECT-TYPE
Sets the Default gateway for the OAM interface when operating in multiple IPs mode. Range: Legal IP address in subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5IpAddressread-writeobsolete
acNetworkIPAdminState
OBJECT-TYPE
Determines if a row is currentely active or not. Lock(1) - the row is in configuration (non active) state. UnLock(2) - row is in active state. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6INTEGER {lock(1), unLock(2)}read-writeobsolete
acSysInterfaceTable
OBJECT-TYPE
Multiple Interfaces' Interface Table
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22not-accessiblecurrent
acSysInterfaceEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1not-accessiblecurrent
acSysInterfaceIndex
OBJECT-TYPE
Index Field for line. AC INI-Param: InterfaceTable_Index
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1Unsigned32 (0..31)not-accessiblecurrent
acSysInterfaceRowStatus
OBJECT-TYPE
ROWSTATUS Field for line. AC INI-Param: InterfaceTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2RowStatusread-createcurrent
acSysInterfaceAction
OBJECT-TYPE
Mangement Field for ACTIONS. AC INI-Param: InterfaceTable_Action
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3INTEGER {none(0)}read-createcurrent
acSysInterfaceActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. AC INI-Param: InterfaceTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysInterfaceApplicationTypes
OBJECT-TYPE
The type assigned to the interface. Access: Offline. AC INI-Param: InterfaceTable_ApplicationTypes
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5INTEGER {oam(0), media(1), control(2), oamAndMedia(3), oamAndControl(4), mediaAndControl(5), oamAndMediaAndControl(6), maintenance(99)}read-createcurrent
acSysInterfaceMode
OBJECT-TYPE
Interface configuration mode. Access: Offline. AC INI-Param: InterfaceTable_InterfaceMode
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6INTEGER {iPv6PrefixManual(3), iPv6Manual(4), iPv4Manual(10)}read-createcurrent
acSysInterfaceIPAddress
OBJECT-TYPE
IP Address (can be either IPv4 or IPv6) for this interface. Access: Online. AC INI-Param: InterfaceTable_IPAddress
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7SnmpAdminString (SIZE(0..45))read-createcurrent
acSysInterfacePrefixLength
OBJECT-TYPE
The number of ‘1’ bits in this interface’s netmask. Access: Offline. AC INI-Param: InterfaceTable_PrefixLength
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8Unsigned32 (0..128)read-createcurrent
acSysInterfaceGateway
OBJECT-TYPE
Default Gateway. Filled in one row only. 0 in others. Access: Offline. AC INI-Param: InterfaceTable_Gateway
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9SnmpAdminString (SIZE(0..45))read-createcurrent
acSysInterfaceVlanID
OBJECT-TYPE
VLAN ID of this interface. Access: Offline. AC INI-Param: InterfaceTable_VlanID
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10Unsigned32 (0..4094)read-createcurrent
acSysInterfaceName
OBJECT-TYPE
a 16 character string of this interface’s name. Access: Offline. AC INI-Param: InterfaceTable_InterfaceName
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11SnmpAdminString (SIZE(0..16))read-createcurrent
acSysInterfacePrimaryDNSServerIPAddress
OBJECT-TYPE
Primary DNS server IP address. Access: Online. AC INI-Param: InterfaceTable_PrimaryDNSServerIPAddress
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.12SnmpAdminString (SIZE(0..45))read-createcurrent
acSysInterfaceSecondaryDNSServerIPAddress
OBJECT-TYPE
Secondary DNS server IP address. Access: Online. AC INI-Param: InterfaceTable_SecondaryDNSServerIPAddress
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.13SnmpAdminString (SIZE(0..45))read-createcurrent
acSysInterfaceUnderlyingInterface
OBJECT-TYPE
Multiple Interfaces' Interface Table. Access: Offline. AC INI-Param: InterfaceTable_UnderlyingInterface
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.14RowPointerread-createcurrent
acSysPhysicalPortsTable
OBJECT-TYPE
Physical Ports Table
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23not-accessiblecurrent
acSysPhysicalPortsEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1not-accessiblecurrent
acSysPhysicalPortsIndex
OBJECT-TYPE
Index Field for line. AC INI-Param: PhysicalPortsTable_Index
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.1Unsigned32 (0..5)not-accessiblecurrent
acSysPhysicalPortsRowStatus
OBJECT-TYPE
ROWSTATUS Field for line. AC INI-Param: PhysicalPortsTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.2RowStatusread-createcurrent
acSysPhysicalPortsAction
OBJECT-TYPE
Mangement Field for ACTIONS. AC INI-Param: PhysicalPortsTable_Action
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.3INTEGER {none(0)}read-createcurrent
acSysPhysicalPortsActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. AC INI-Param: PhysicalPortsTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysPhysicalPortsPort
OBJECT-TYPE
Physical Ports Table. AC INI-Param: PhysicalPortsTable_Port
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5SnmpAdminString (SIZE(0..17))read-onlycurrent
acSysPhysicalPortsMode
OBJECT-TYPE
Port Enable/Disable. AC INI-Param: PhysicalPortsTable_Mode
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.6INTEGER {disable(0), enable(1)}read-onlycurrent
acSysPhysicalPortsNativeVlan
OBJECT-TYPE
Port's Native VID or PVID. Access: Offline. AC INI-Param: PhysicalPortsTable_NativeVlan
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.7Unsigned32 (0..4096)read-createcurrent
acSysPhysicalPortsSpeedDuplex
OBJECT-TYPE
Port's Speed and Duplex Mode. Access: Offline. AC INI-Param: PhysicalPortsTable_SpeedDuplex
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.8INTEGER {s10BaseTHalfDuplex(0), s10BaseTFullDuplex(1), s100BaseTHalfDuplex(2), s100BaseTFullDuplex(3), autoNegotiation(4), s1000BaseTHalfDuplex(6), s1000BaseTFullDuplex(7)}read-createcurrent
acSysPhysicalPortsPortDescription
OBJECT-TYPE
Port's User Description. Access: Offline. AC INI-Param: PhysicalPortsTable_PortDescription
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.9SnmpAdminString (SIZE(0..17))read-createcurrent
acSysPhysicalPortsGroupMember
OBJECT-TYPE
Physical Ports Table. AC INI-Param: PhysicalPortsTable_GroupMember
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.10SnmpAdminString (SIZE(0..17))read-onlycurrent
acSysPhysicalPortsGroupStatus
OBJECT-TYPE
Active or Redundant Status. AC INI-Param: PhysicalPortsTable_GroupStatus
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.11SnmpAdminString (SIZE(0..17))read-onlycurrent
acSysEtherGroupTable
OBJECT-TYPE
Ether Group Table
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24not-accessiblecurrent
acSysEtherGroupEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1not-accessiblecurrent
acSysEtherGroupIndex
OBJECT-TYPE
Index Field for line. AC INI-Param: EtherGroupTable_Index
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.1Unsigned32 (0..5)not-accessiblecurrent
acSysEtherGroupRowStatus
OBJECT-TYPE
ROWSTATUS Field for line Static table - only notInService/active supported. AC INI-Param: EtherGroupTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.2RowStatusread-createcurrent
acSysEtherGroupAction
OBJECT-TYPE
Mangement Field for ACTIONS. AC INI-Param: EtherGroupTable_Action
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.3INTEGER {none(0)}read-createcurrent
acSysEtherGroupActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. AC INI-Param: EtherGroupTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysEtherGroupGroup
OBJECT-TYPE
Ethernet Group's Name. AC INI-Param: EtherGroupTable_Group
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.5SnmpAdminString (SIZE(0..15))read-onlycurrent
acSysEtherGroupMode
OBJECT-TYPE
Group Mode of Operation. Access: Offline. AC INI-Param: EtherGroupTable_Mode
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.6INTEGER {oneRXoneTX(2), twoRXoneTX(3), twoRXtwoTX(4)}read-writecurrent
acSysEtherGroupMember1
OBJECT-TYPE
First Member of the Group. Select the OID corresponding to the one appearing in the Physical Ports table. The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5. acSysPhysicalPortsPort. Access: Offline. AC INI-Param: EtherGroupTable_Member1
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.7RowPointerread-writecurrent
acSysEtherGroupMember2
OBJECT-TYPE
Second Member of the Group. Select the OID corresponding to the one appearing in the Physical Ports table. The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5. acSysPhysicalPortsPort. Access: Offline. AC INI-Param: EtherGroupTable_Member2
1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.8RowPointerread-writecurrent
acSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.2
acSyslogServerIPAddress
OBJECT-TYPE
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Online. AC INI-Param: SYSLOGSERVERIP
1.3.6.1.4.1.5003.9.10.10.1.3.2.1IpAddressread-writecurrent
acSyslogEnable
OBJECT-TYPE
Enable SysLog protocol log. Access: Online. AC INI-Param: ENABLESYSLOG
1.3.6.1.4.1.5003.9.10.10.1.3.2.2INTEGER {disable(0), enable(1)}read-writecurrent
acSyslogAcSyslogServerPortNumber
OBJECT-TYPE
Defines the Port number of the Syslog Server. Range = Legal Port Number. Access: Online. AC INI-Param: SyslogServerPort
1.3.6.1.4.1.5003.9.10.10.1.3.2.3Unsigned32 (0..65535)read-writecurrent
acSyslogFacility
OBJECT-TYPE
parameter to determine the facility number at syslog messages. can be: 16 = local use 0 (local0) 17 = local use 1 (local1) .. 23 = local use 0 (local7). Access: Online. AC INI-Param: SyslogFacility
1.3.6.1.4.1.5003.9.10.10.1.3.2.4Unsigned32 (16..23)read-writecurrent
acSysNTP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.3
acSysNTPServerIPAddress
OBJECT-TYPE
This parameter is used to define the NTP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: NTPServerIP
1.3.6.1.4.1.5003.9.10.10.1.3.3.1IpAddressread-writecurrent
acSysNTPUtcOffset
OBJECT-TYPE
This parameter is used to define the NTP time to offset, in seconds. Default = 0 Range = -43200 to +43200 seconds. Access: Instant. AC INI-Param: NTPServerUTCOffset
1.3.6.1.4.1.5003.9.10.10.1.3.3.2Integer32 (-43200..43200)read-writecurrent
acSysNTPUpdateInterval
OBJECT-TYPE
This parameter defines the NTP update interval, in seconds. It's inadvisable to set it exceeding 1 month (2592000 seconds). Range = 0 to 2592000 seconds Default = 86400 seconds. Access: Instant. AC INI-Param: NTPUpdateInterval
1.3.6.1.4.1.5003.9.10.10.1.3.3.3Unsigned32 (1..2147483647)read-writecurrent
acSysNTPSecondaryServerIP
OBJECT-TYPE
Defines the NTP Secondary Server IP address. Access: Instant. AC INI-Param: NTPSecondaryServerIP
1.3.6.1.4.1.5003.9.10.10.1.3.3.4IpAddressread-writecurrent
acSysDayLightSavingTime
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.3.21
acSysDayLightSavingTimeMode
OBJECT-TYPE
Determines whether to enable the time ajustment to day light saving time while update time from NTP server. Access: Instant. AC INI-Param: DayLightSavingTimeEnable
1.3.6.1.4.1.5003.9.10.10.1.3.3.21.1INTEGER {disable(0), enable(1)}read-writecurrent
acSysDayLightSavingTimeOffset
OBJECT-TYPE
when DayLightSavingTimeEnable is Enable, this parametes determine the fix size in minutes: 0-120. Access: Instant. AC INI-Param: DayLightSavingTimeOffset
1.3.6.1.4.1.5003.9.10.10.1.3.3.21.2Unsigned32 (0..120)read-writecurrent
acSysDayLightSavingTimeStart
OBJECT-TYPE
This parameter defines the date and time of starting day light time in current year. 2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day of Month) mo:wday/week:hh:mm where week of month is 01-04, or 05 for specifying last week of the month, and wday is one of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT. Access: Instant. AC INI-Param: DayLightSavingTimeStart
1.3.6.1.4.1.5003.9.10.10.1.3.3.21.3SnmpAdminString (SIZE(0..16))read-writecurrent
acSysDayLightSavingTimeEnd
OBJECT-TYPE
This parameter defines the date and time of ending day light time in current year. 2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day of Month) mo:wday/week:hh:mm where week of month is 01-04, or 05 for specifying last week of the month, and wday is one of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT. Access: Instant. AC INI-Param: DayLightSavingTimeEnd
1.3.6.1.4.1.5003.9.10.10.1.3.3.21.4SnmpAdminString (SIZE(0..16))read-writecurrent
acSysWEB
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.4
acSysWEBConfigDisable
OBJECT-TYPE
Enables or disables Web Configuration. 0 = Read & Write mode (default) 1 = Read Only mode. Access: Offline. AC INI-Param: DISABLEWEBCONFIG
1.3.6.1.4.1.5003.9.10.10.1.3.4.1INTEGER {enable(0), disable(1)}read-writecurrent
acSysWEBHTTPSOnly
OBJECT-TYPE
Use this parameter to allow only HTTPS connections (force security). When set to 1, unencrypted HTTP (normally, port 80) is blocked. Access: Offline. AC INI-Param: HTTPSOnly
1.3.6.1.4.1.5003.9.10.10.1.3.4.2INTEGER {disable(0), enable(1)}read-writecurrent
acSysWEBHTTPSPort
OBJECT-TYPE
Determine the local Secure HTTPS port of the device. The default port is 443. Range = 1-65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: HTTPSPORT
1.3.6.1.4.1.5003.9.10.10.1.3.4.3Unsigned32 (0..65535)read-writecurrent
acSysWEBWebUseRadiusLogin
OBJECT-TYPE
Uses the RADIUS (Remote Authentication Dial-In User Server/Service) for Web interface authentication. Make sure that ENABLERADIUS is on. Use of this parameter without HTTPSONLY = 1 is not recommended. Access: Instant. AC INI-Param: WEBRADIUSLOGIN
1.3.6.1.4.1.5003.9.10.10.1.3.4.4INTEGER {disable(0), enable(1)}read-writecurrent
acSysWEBHTTPSCipherString
OBJECT-TYPE
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSCipherString
1.3.6.1.4.1.5003.9.10.10.1.3.4.5SnmpAdminString (SIZE(0..200))read-writecurrent
acSysWEBDenyAuthenticationTimer
OBJECT-TYPE
Defines the time the next authentication attempt from the last authentication faild IP should be denied. The range can be any value from 0 - 86400 in seconds. Access: Online. AC INI-Param: DenyAuthenticationTimer
1.3.6.1.4.1.5003.9.10.10.1.3.4.6Unsigned32 (0..86400)read-writecurrent
acSysWEBWanHttpPort
OBJECT-TYPE
Determines the WAN HTTP port of the device. If set to 0, WAN HTTP access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpPort
1.3.6.1.4.1.5003.9.10.10.1.3.4.7Unsigned32 (0..65535)read-writeobsolete
acSysWEBWanHttpsPort
OBJECT-TYPE
Determines the WAN HTTPS port of the device. If set to 0, WAN HTTPS access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpsPort
1.3.6.1.4.1.5003.9.10.10.1.3.4.8Unsigned32 (0..65535)read-writeobsolete
acSysWEBAllowWanHttp
OBJECT-TYPE
Enables or disables WAN access to the management interface via HTTP. Access: Offline. AC INI-Param: AllowWanHttp
1.3.6.1.4.1.5003.9.10.10.1.3.4.9INTEGER {disable(0), enable(1)}read-writecurrent
acSysWEBAllowWanHttps
OBJECT-TYPE
Enables or disables WAN access to the management interface via HTTPS. Access: Offline. AC INI-Param: AllowWanHttps
1.3.6.1.4.1.5003.9.10.10.1.3.4.10INTEGER {disable(0), enable(1)}read-writecurrent
acSysWEBACLTable
OBJECT-TYPE
Access control list for the WEB.
1.3.6.1.4.1.5003.9.10.10.1.3.4.21not-accessiblecurrent
acSysWEBACLEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1not-accessiblecurrent
acSysWEBACLIndex
OBJECT-TYPE
WEB ACL (Access Control List) index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1Unsigned32 (0..9)read-onlycurrent
acSysWEBACLIP
OBJECT-TYPE
Allows IP addresses to connect to the Web interface. Set to zeroes to allow all IP addresses. Range: Valid IP address . Access: Instant. AC INI-Param: WEBACCESSLIST
1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2IpAddressread-writecurrent
acSysWEBAccess
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.5
acSysWEBAccessTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.5.1not-accessiblecurrent
acSysWEBAccessEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1not-accessiblecurrent
acSysWEBAccessRowStatus
OBJECT-TYPE
WEB Basic row-status. AC INI-Param: WEBAccessRowStatus
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1Unsigned32 (1)read-writecurrent
acSysWEBAccessAction
OBJECT-TYPE
WEB Access action. AC INI-Param: WEBAccessAction
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2Unsigned32 (0)read-createcurrent
acSysWEBAccessActionResult
OBJECT-TYPE
WEB Access action result. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3Unsigned32 (0)read-onlycurrent
acSysWEBAccessIndex
OBJECT-TYPE
WEB Access index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4INTEGER {administrator(0), monitoringLevel(1)}read-onlycurrent
acSysWEBAccessUserName
OBJECT-TYPE
WEB Basic user name. Range = String[26]. Access: Instant. AC INI-Param: WEBAccessUserName
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5SnmpAdminString (SIZE(0..60))read-createcurrent
acSysWEBAccessUserCode
OBJECT-TYPE
WEB Basic userAccess. Access: Instant. AC INI-Param: WEBAccessUserCode
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6SnmpAdminString (SIZE(0..60))read-createcurrent
acSysWEBAccessWebAuthMode
OBJECT-TYPE
Selects HTTP basic (clear text) or digest (MD5) authentication for the web interface. When set to 0, basic authentication (clear text) will be used. When set to 1, digest authentication (MD5) will be used. When set to 2, digest authentication (MD5) will be used for HTTP, while basic authentication will be used for HTTPS. Note that turning on RADIUS login forces basic authentication. Access: Instant. AC INI-Param: WebAuthMode
1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7INTEGER {basicMode(0), digestModeWhenPossible(1), digestModeHTTPOnly(2)}read-createcurrent
acSysNATTraversal
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.6
acSysSTUN
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.6.21
acSysSTUNEnable
OBJECT-TYPE
This parameter is used to enable the STUN module, used for NAT traversal of UDP packets. Access: Offline. AC INI-Param: ENABLESTUN
1.3.6.1.4.1.5003.9.10.10.1.3.6.21.1INTEGER {disable(0), enable(1)}read-writecurrent
acSysSTUNPrimaryServerIP
OBJECT-TYPE
Defines the primary STUN Server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERPRIMARYIP
1.3.6.1.4.1.5003.9.10.10.1.3.6.21.2IpAddressread-writecurrent
acSysSTUNSecondaryServerIP
OBJECT-TYPE
Defines the secondary STUN server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERSECONDARYIP
1.3.6.1.4.1.5003.9.10.10.1.3.6.21.3IpAddressread-writecurrent
acSysSTUNBindingLifeTime
OBJECT-TYPE
This parameter is used to define the NAT binding lifetime, in seconds. STUN refreshes the binding information after this time expires. Range = 0 - 2592000. Access: Offline. AC INI-Param: NATBINDINGDEFAULTTIMEOUT
1.3.6.1.4.1.5003.9.10.10.1.3.6.21.4Unsigned32 (0..2147483647)read-writecurrent
acSysTelnet
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.7
acSysTelnetServerEnable
OBJECT-TYPE
Enables or disables the embedded Telnet server. Telnet is disabled by default for security reasons. 0 = Disable 1= Enable 2 = SSL mode (if available - requires an SSL-aware Telnet client software) SSL mode is not available on the MP-108 / MP-124 media gateways. Access: Instant. AC INI-Param: TelnetServerEnable
1.3.6.1.4.1.5003.9.10.10.1.3.7.1INTEGER {disable(0), enable(1), ssl(2)}read-writecurrent
acSysTelnetServerPort
OBJECT-TYPE
Defines the port number for the embedded Telnet server. Range = Valid port number. Access: Online. AC INI-Param: TELNETSERVERPORT
1.3.6.1.4.1.5003.9.10.10.1.3.7.2Unsigned32 (0..65535)read-writecurrent
acSysTelnetServerIdleDisconnect
OBJECT-TYPE
This parameter is used to set the timeout for disconnection of an idle Telnet session (minutes). When set to zero, idle sessions are not disconnected. Range: Any number. Access: Offline. AC INI-Param: TelnetServerIdleDisconnect
1.3.6.1.4.1.5003.9.10.10.1.3.7.3Unsigned32 (0..2147483647)read-writecurrent
acSysTelnetSSHServerPort
OBJECT-TYPE
Defines the port number for the embedded SSH server. Range = Valid port number. Access: Online. AC INI-Param: SSHServerPort
1.3.6.1.4.1.5003.9.10.10.1.3.7.4Unsigned32 (0..65535)read-writecurrent
acSysTelnetSSHServerEnable
OBJECT-TYPE
Enables or disables the embedded SSH server. 0 = Disable 1= Enable . Access: Online. AC INI-Param: SSHServerEnable
1.3.6.1.4.1.5003.9.10.10.1.3.7.5INTEGER {disable(0), enable(1)}read-writecurrent
acSysTelnetSSHAdminKey
OBJECT-TYPE
This parameter holds an RSA public key for strong authentication to the SSH interface (if enabled). The value should be a base64-encoded string see the Security appendix for additional information. Access: Instant. AC INI-Param: SSHAdminKey
1.3.6.1.4.1.5003.9.10.10.1.3.7.6SnmpAdminString (SIZE(0..510))read-writecurrent
acSysTelnetSSHRequirePublicKey
OBJECT-TYPE
Enables or disables RSA public keys in SSH. When set to 0, RSA public keys are optional (if SSHAdminKey is set). When set to 1, RSA public keys are mandatory. Access: Instant. AC INI-Param: SSHRequirePublicKey
1.3.6.1.4.1.5003.9.10.10.1.3.7.7INTEGER {disable(0), enable(1)}read-writecurrent
acSysTelnetServerWanPort
OBJECT-TYPE
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtTelnetPort
1.3.6.1.4.1.5003.9.10.10.1.3.7.8Unsigned32 (0..65535)read-writeobsolete
acSysTelnetWanSSHServerPort
OBJECT-TYPE
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtSSHPort
1.3.6.1.4.1.5003.9.10.10.1.3.7.9Unsigned32 (0..65535)read-writeobsolete
acSysTelnetSSHMaxSessions
OBJECT-TYPE
Configure maximum allowed number of SSH sessions. Access: Online. AC INI-Param: SSHMaxSessions
1.3.6.1.4.1.5003.9.10.10.1.3.7.10Unsigned32 (1..2)read-writecurrent
acSysTelnetSSHMaxPayloadSize
OBJECT-TYPE
Configure maximum uncompressed payload size for SSH packets, in bytes. Access: Online. AC INI-Param: SSHMaxPayloadSize
1.3.6.1.4.1.5003.9.10.10.1.3.7.11Unsigned32 (550..32768)read-writecurrent
acSysTelnetSSHMaxBinaryPacketSize
OBJECT-TYPE
Configure maximum packet size for SSH packets, in bytes. Access: Online. AC INI-Param: SSHMaxBinaryPacketSize
1.3.6.1.4.1.5003.9.10.10.1.3.7.12Unsigned32 (582..35000)read-writecurrent
acSysTelnetAllowWanTelnet
OBJECT-TYPE
Enables or disables WAN access to the management interface via Telnet. Access: Offline. AC INI-Param: AllowWanTelnet
1.3.6.1.4.1.5003.9.10.10.1.3.7.13INTEGER {disable(0), enable(1)}read-writecurrent
acSysTelnetAllowWanSSH
OBJECT-TYPE
Enables or disables WAN access to the management interface via SSH. Access: Offline. AC INI-Param: AllowWanSSH
1.3.6.1.4.1.5003.9.10.10.1.3.7.14INTEGER {disable(0), enable(1)}read-writecurrent
acSysHTTPClient
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.8
acSysHTTPClientAutoUpdatePredefinedTime
OBJECT-TYPE
Schedules an automatic update to a predefined time of the day. The range is 'HH:MM' (24-hour format). For example: 20:18 . Access: Online. AC INI-Param: AutoUpdatePredefinedTime
1.3.6.1.4.1.5003.9.10.10.1.3.8.1SnmpAdminString (SIZE(0..6))read-writecurrent
acSysHTTPClientAutoUpdateFrequency
OBJECT-TYPE
Determines the number of minutes the gateway waits between automatic updates. The default value is 0 (the update at fixed intervals mechanism is disabled). Range: Any number . Access: Online. AC INI-Param: AutoUpdateFrequency
1.3.6.1.4.1.5003.9.10.10.1.3.8.2Unsigned32 (0..65536)read-writecurrent
acSysHTTPClientAutoUpdateCmpFile
OBJECT-TYPE
Enables / disables the automatic update mechanism for the cmp file. 0 = The automatic update mechanism doesn't apply to the cmp file (default). 1 = The automatic update mechanism includes the cmp file. Access: Online. AC INI-Param: AutoUpdateCmpFile
1.3.6.1.4.1.5003.9.10.10.1.3.8.3INTEGER {disable(0), enable(1)}read-writecurrent
acSysHTTPClientCmpFileURL
OBJECT-TYPE
This parameter provides a link to a software image (CMP file) to be downloaded from a remote server. . Access: Offline. AC INI-Param: CmpFileURL
1.3.6.1.4.1.5003.9.10.10.1.3.8.4SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientIniFileURL
OBJECT-TYPE
This parameter provides a link to an ini file to be downloaded from a remote server. . Access: Offline. AC INI-Param: IniFileURL
1.3.6.1.4.1.5003.9.10.10.1.3.8.5SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientIniFileTemplateURL
OBJECT-TYPE
Provides a link to an ini file to be downloaded from a remote server, in addition to IniFileUrl. Range = http://server_name/file, https://server_name/file. Access: Offline. AC INI-Param: IniFileTemplateUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.6SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientCPTFileURL
OBJECT-TYPE
Provides a link to a Call Progress Tones (CPT) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Offline. AC INI-Param: CptFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.7SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientVPFileURL
OBJECT-TYPE
Provides a link to a Voice Prompts file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Online. AC INI-Param: VpFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.8SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientPRTFileURL
OBJECT-TYPE
Provides a link to a prerecorded tones dat file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Online. AC INI-Param: PrtFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.9SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientFXSCoeffFileURL
OBJECT-TYPE
Provides a link to an FXS coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXSCoeffFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.10SnmpAdminString (SIZE(0..254))read-writedeprecated
acSysHTTPClientFXOCoeffFileURL
OBJECT-TYPE
Provides a link to an FXO coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXOCoeffFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.11SnmpAdminString (SIZE(0..254))read-writedeprecated
acSysHTTPClientCASFileURL
OBJECT-TYPE
Provides a link to a Channel Associated Signaling (CAS) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Online. AC INI-Param: CasFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.12SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientXMLFileUrl
OBJECT-TYPE
Provides a link to an XML segments file, to be downloaded from a remote server. See the chapter 'Automatic Update Facility' for supported URL options. Access: Online. AC INI-Param: APSSegmentsFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.13SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientCoderTableFileUrl
OBJECT-TYPE
Provides a link to a coder table (CTBL) file that is to be downloaded from a remote server. . Access: Online. AC INI-Param: CoderTableFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.14SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientUserInfoFileURL
OBJECT-TYPE
Provides a link to the user information file, to be downloaded using Automatic Update. Relevant only for H323 or SIP controlled devices. Access: Online. AC INI-Param: UserInfoFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.15SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientDialPlanFileURL
OBJECT-TYPE
URL for downloading a Dial Plan file using the Automatic Update facility. Access: Online. AC INI-Param: DialPlanFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.16SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientTLSPkeyFileUrl
OBJECT-TYPE
URL for downloading a TLS private key file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSPkeyFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.17SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientTLSCertFileUrl
OBJECT-TYPE
URL for downloading a TLS certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSCertFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.18SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientTLSRootFileUrl
OBJECT-TYPE
URL for downloading a TLS trusted root certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSRootFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.19SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientWebLogoFileUrl
OBJECT-TYPE
URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Online. AC INI-Param: WebLogoFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.20SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientVideoFontFileURL
OBJECT-TYPE
Indicates the URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Online. AC INI-Param: VideoFontFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.21SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientV5PortConfFileURL
OBJECT-TYPE
Provides a link to a software (V5PortConfiguration file) to be downloaded from a remote server. Access: Online. AC INI-Param: V5PortConfigurationFileURL
1.3.6.1.4.1.5003.9.10.10.1.3.8.22SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientDataConfigurationFileUrl
OBJECT-TYPE
Provides a link to a data configuration file to be downloaded from a remote server using the Automatic Update facility. Access: Offline. AC INI-Param: RGCONFFILEURL
1.3.6.1.4.1.5003.9.10.10.1.3.8.23SnmpAdminString (SIZE(0..254))read-writecurrent
acSysHTTPClientAmdSensitivityFileUrl
OBJECT-TYPE
Provides a link to the AMD Sensitivity file to be downloaded from a remote server. Access: Online. AC INI-Param: AmdSensitivityFileUrl
1.3.6.1.4.1.5003.9.10.10.1.3.8.24SnmpAdminString (SIZE(0..254))read-writecurrent
acSysSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.9
acSysSNMPKeepAliveTrapPort
OBJECT-TYPE
The port to which the keep alive traps are sent to. Access: Instant. AC INI-Param: KeepAliveTrapPort
1.3.6.1.4.1.5003.9.10.10.1.3.9.1Unsigned32 (0..65334)read-writecurrent
acSysSNMPEmsColdStrartIndication
OBJECT-TYPE
EMS object to be used as indication to the device's state in the 'eyes' of the EMS. Default - 0. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.9.2Unsigned32 (0..2147483647)read-writecurrent
acSysSNMPWanPort
OBJECT-TYPE
This parameter specifies the WAN port number for SNMP requests and responses. If set to 0, WAN access to SNMP is disabled. Range = 0 to 65535. Access: Offline. AC INI-Param: WanMgmtSnmpPort
1.3.6.1.4.1.5003.9.10.10.1.3.9.3Unsigned32 (0..65535)read-writeobsolete
acSysSNMPAllowWanSnmp
OBJECT-TYPE
Enables or disables WAN access to the management interface via SNMP. Access: Offline. AC INI-Param: AllowWanSnmp
1.3.6.1.4.1.5003.9.10.10.1.3.9.4INTEGER {disable(0), enable(1)}read-writecurrent
acSysVLAN
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.10
acSysVLANOamVlanId
OBJECT-TYPE
Sets the OAMP (Operation, Administration, Management and Provisioning) VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANOAMVLANID
1.3.6.1.4.1.5003.9.10.10.1.3.10.1Unsigned32 (1..4094)read-writeobsolete
acSysVLANControlVlanId
OBJECT-TYPE
Sets the control VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANCONTROLVLANID
1.3.6.1.4.1.5003.9.10.10.1.3.10.2Unsigned32 (1..4094)read-writeobsolete
acSysVLANMediaVlanId
OBJECT-TYPE
Sets the media VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANMEDIAVLANID
1.3.6.1.4.1.5003.9.10.10.1.3.10.3Unsigned32 (1..4094)read-writeobsolete
acSysVLANNetworkServiceClassPriority
OBJECT-TYPE
This parameter is used to set the priority for Network service class content. Range = 0 to 7 Default = 7. Access: Online. AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY
1.3.6.1.4.1.5003.9.10.10.1.3.10.4Unsigned32 (0..7)read-writedeprecated
acSysVLANPremiumServiceClassMediaPriority
OBJECT-TYPE
Sets the priority for the Premium service class content and media traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY
1.3.6.1.4.1.5003.9.10.10.1.3.10.5Unsigned32 (0..7)read-writedeprecated
acSysVLANGoldServiceClassPriority
OBJECT-TYPE
Sets the priority for the Gold service class content. Range = 0 to 7 Default = 4. Access: Online. AC INI-Param: VLANGOLDSERVICECLASSPRIORITY
1.3.6.1.4.1.5003.9.10.10.1.3.10.6Unsigned32 (0..7)read-writedeprecated
acSysVLANBronzeServiceClassPriority
OBJECT-TYPE
Sets the priority for the Bronze service class content. Range = 0 to 7 Default = 2. Access: Online. AC INI-Param: VLANBRONZESERVICECLASSPRIORITY
1.3.6.1.4.1.5003.9.10.10.1.3.10.7Unsigned32 (0..7)read-writedeprecated
acSysVLANPremiumServiceClassControlPriority
OBJECT-TYPE
Sets the priority for the Premium service class content and control traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY
1.3.6.1.4.1.5003.9.10.10.1.3.10.8Unsigned32 (0..7)read-writedeprecated
acSysVLANNetworkServiceClassDiffServ
OBJECT-TYPE
This parameter is used to set the DiffServ for Network service class content. Range = 0 to 63 Default = 48. Access: Online. AC INI-Param: NETWORKSERVICECLASSDIFFSERV
1.3.6.1.4.1.5003.9.10.10.1.3.10.9Unsigned32 (0..63)read-writecurrent
acSysVLANPremiumServiceClassMediaDiffServ
OBJECT-TYPE
This parameter is used to set the DiffServ for Premium service class content and media traffic. Range = 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV
1.3.6.1.4.1.5003.9.10.10.1.3.10.10Unsigned32 (0..63)read-writecurrent
acSysVLANPremiumServiceClassControlDiffServ
OBJECT-TYPE
Sets the DiffServ for the Premium service class content and control traffic. Range: 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV
1.3.6.1.4.1.5003.9.10.10.1.3.10.11Unsigned32 (0..63)read-writecurrent
acSysVLANGoldServiceClassDiffServ
OBJECT-TYPE
Sets the DiffServ for the Gold service class content. Range = 0 to 63 Default = 26. Access: Online. AC INI-Param: GOLDSERVICECLASSDIFFSERV
1.3.6.1.4.1.5003.9.10.10.1.3.10.12Unsigned32 (0..63)read-writecurrent
acSysVLANBronzeServiceClassDiffServ
OBJECT-TYPE
Sets the DiffServ for the Bronze service class content. Range = 0 to 63 Default = 10. Access: Online. AC INI-Param: BRONZESERVICECLASSDIFFSERV
1.3.6.1.4.1.5003.9.10.10.1.3.10.13Unsigned32 (0..63)read-writecurrent
acSysVLANVlanNativeVlanId
OBJECT-TYPE
Sets the native VLAN identifier. Access: Online. AC INI-Param: VLANNATIVEVLANID
1.3.6.1.4.1.5003.9.10.10.1.3.10.14Unsigned32 (1..4094)read-writecurrent
acSysVLANMode
OBJECT-TYPE
Sets the VLAN functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: VLANMODE
1.3.6.1.4.1.5003.9.10.10.1.3.10.15INTEGER {disable(0), enable(1)}read-writecurrent
acSysVlanMapTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.10.21not-accessiblecurrent
acSysVlanMapEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1not-accessiblecurrent
acSysVlanMapIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: DiffServToVlanPriority_Index
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1Unsigned32 (0..63)not-accessiblecurrent
acSysVlanMapRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2RowStatusread-createcurrent
acSysVlanMapAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3INTEGER {none(0)}read-createcurrent
acSysVlanMapActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysVlanMapDiffServ
OBJECT-TYPE
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_DiffServ
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5Unsigned32 (0..63)read-createcurrent
acSysVlanMapVlanPriority
OBJECT-TYPE
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_VlanPriority
1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6Unsigned32 (0..7)read-createcurrent
acSysSCTP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.11
acSysSCTPHeartBeatInterval
OBJECT-TYPE
Defines the SCTP heartbeat interval. Range: 1 to 3600. Access: Offline. AC INI-Param: SCTPHBInterval
1.3.6.1.4.1.5003.9.10.10.1.3.11.1Unsigned32 (0..3600)read-writecurrent
acSysSCTPT4SACKTimer
OBJECT-TYPE
Defines the SCTP T4 SACK timer interval. Range: 1 to 5. Access: Offline. AC INI-Param: SCTPT4SAckTimer
1.3.6.1.4.1.5003.9.10.10.1.3.11.2Unsigned32 (1..5)read-writecurrent
acSysSCTPCheckSumMethod
OBJECT-TYPE
Stream Control Transmission Protocol (SCTP) uses a checksum mechanism in order to authenticate packets on both sides (the receiving side and the transmitting side). Presently, two checksum mechanisms are available: 0 = adler32 checksum mechanism 1 = crc32c checksum mechanism (improved mechanism). Access: Offline. AC INI-Param: SCTPChecksumMethod
1.3.6.1.4.1.5003.9.10.10.1.3.11.3INTEGER {adler(0), crc(1)}read-writecurrent
acSysSCTPHostName
OBJECT-TYPE
When this parameter is set to any value other than an empty string, SCTP (Stream Control Transmission Protocol) uses the value as the value of the FQDN (Fully Qualified Domain Name) parameter attached to the INIT chunk. In this case, the FQDN parameter replaces any IP address parameters in the INIT chunk. This feature enables overcoming NAT problems where the original IP addresses belonging to the endpoint supports are converted into pseudo addresses. When this parameter is not set (default), the INIT chunk is sent without any FQDN parameter. Range = String[42]. Access: Offline. AC INI-Param: SCTPHOSTNAME
1.3.6.1.4.1.5003.9.10.10.1.3.11.4SnmpAdminString (SIZE(0..255))read-writecurrent
acSysSCTPAssociationsNum
OBJECT-TYPE
Defines the maximum number of Stream Control Transmission Protocol (SCTP) associations that can be opened. Range: 1 to 8. Access: Offline. AC INI-Param: SCTPAssociationsNum
1.3.6.1.4.1.5003.9.10.10.1.3.11.5Unsigned32 (1..8)read-writecurrent
acSysEthernetPort
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.12
acSysEthernetPortPhyConfiguration
OBJECT-TYPE
Controls the Ethernet connection mode type. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite port is not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX) in this mode is always configured correctly. 0 = 10 Base-T half-duplex 1 = 10 Base-T full-duplex 2 = 100 Base-TX half-duplex 3 = 100 Base-TX full-duplex 4 = Auto-negotiate. Access: Offline. AC INI-Param: EthernetPhyConfiguration
1.3.6.1.4.1.5003.9.10.10.1.3.12.1INTEGER {halfDuplex10BaseT(0), fullDuplex10BaseT(1), halfDuplex100BaseT(2), fullDuplex100BaseT(3), autoNegotiate(4), fullDuplex1000BaseT(7)}read-writecurrent
acSysPOE
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.12.21
acSysPOETable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1not-accessiblecurrent
acSysPOEEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1not-accessiblecurrent
acSysPOEIndex
OBJECT-TYPE
This parameter is used for the Power Over Ethenet (PoE) Index Field for line. Internal parameter. AC INI-Param: POETable_Index
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.1Unsigned32 (0..11)not-accessiblecurrent
acSysPOERowStatus
OBJECT-TYPE
Power Over Ethenet (PoE) ROWSTATUS field for line. Internal parameter. Access: Offline. AC INI-Param: POETable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.2RowStatusread-createcurrent
acSysPOEAction
OBJECT-TYPE
Power Over Ethenet (PoE) Mangement Field for ACTIONS. Internal parameter. Access: Offline. AC INI-Param: POETable_Action
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.3INTEGER {none(0)}read-createcurrent
acSysPOEActionRes
OBJECT-TYPE
Power Over Ethenet (PoE) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: POETable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysPOEPortEnable
OBJECT-TYPE
This parameter is used for Power Over Ethenet (PoE) - enable/diasble port PoE. Access: Offline. AC INI-Param: POETable_PortEnable
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.5INTEGER {disable(0), enable(1)}read-createcurrent
acSysPOEPortPower
OBJECT-TYPE
This parameter is used for Power Over Ethenet (PoE) - Port Power[mW]. Access: Offline. AC INI-Param: POETable_PortPower
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.6Unsigned32 (4000..30000)read-createcurrent
acSysPOEPortATEnable
OBJECT-TYPE
This parameter is used to show if working in mode IEEE 802.3AF (0) or IEEE 802.3AT (1). Access: Offline. AC INI-Param: POETable_PortATEnable
1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.7INTEGER {disable(0), enable(1)}read-createcurrent
acSysNetworkSettings
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.3.13
acSysNetworkSettingsDisableICMPRedirects
OBJECT-TYPE
Disable ICMP Redirect messages. When set to 0 ICMP Redirect messages are not ignored. Access: Instant. AC INI-Param: DisableICMPRedirects
1.3.6.1.4.1.5003.9.10.10.1.3.13.1INTEGER {disable(0), enable(1)}read-writecurrent
acSysMiscConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.4
acSysDiagnostics
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.4.1
acSysDiagnosticsEnable
OBJECT-TYPE
Checks the correct functionality of the different hardware components on the board. On completion of the check, the board sends an EV_END_BIT value, which contains information on the test results of each hardware component. 0 = No diagnostics (default) 1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY and Flash) 2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY, but partial, test of Flash, a quicker mode). Access: Offline. AC INI-Param: ENABLEDIAGNOSTICS
1.3.6.1.4.1.5003.9.10.10.1.4.1.1INTEGER {disabled(0), builtInTest(1), builtInTestwithPartialFlash(2), builtInTestWithSDRAM(3), builtInTestOnUtopiaVxb(4), internalUse(99)}read-writecurrent
acSysDiagnosticsEnablePerformanceThresholdAlarms
OBJECT-TYPE
This parameter enables sending SNMP traps and Syslog messages when performance of the device is degraded (according to the configured thresholds). Access: Instant. AC INI-Param: PM_EnableThresholdAlarms
1.3.6.1.4.1.5003.9.10.10.1.4.1.2INTEGER {disable(0), enable(1)}read-writecurrent
acSysDiagnosticsListOfActivitiesToLog
OBJECT-TYPE
This parameter defines what activities are to be reported by the device in the form of a log message. Parameter format is x,y,z-... where x,y,z are activity codes to be reported by the device. Supported activity codes: PVC - Parameter Value Changes. AFL - Auxiliary Files Loading. DR - Device Reset. FB - Flash Burning. SWU - SoftWareUpdate. ARD - Access to Restricted Domains. NAA - Non Authorized Access. SPC - Sensitive Parameters Changes. Access: Online. AC INI-Param: ActivityListToLog
1.3.6.1.4.1.5003.9.10.10.1.4.1.3SnmpAdminString (SIZE(0..32))read-writecurrent
acSysGenericINI
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.4.2
acSysGenericINILine
OBJECT-TYPE
Flexible INI file line. to enter more than one line, use '$@$' between lines. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.4.2.1SnmpAdminString (SIZE(0..512))read-writecurrent
acSysGenericINISecureStartup
OBJECT-TYPE
Enables or disables secure startup mode. In this mode, downloading of the INI file is restricted to a URL provided in prior configuration (see parameter IniFileURL) or via DHCP. Access: Offline. AC INI-Param: EnableSecureStartup
1.3.6.1.4.1.5003.9.10.10.1.4.2.2INTEGER {disable(0), enable(1)}read-writecurrent
acSysGenericCli
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.4.3
acSysGenericCliCommand
OBJECT-TYPE
send CLI command. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.4.3.1SnmpAdminString (SIZE(0..512))read-writecurrent
acSysGenericCliCommandResponse
OBJECT-TYPE
get CLI command response. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.4.3.2SnmpAdminString (SIZE(0..512))read-onlycurrent
acSysLicenseKey
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.5
acSysLicenseKeyString
OBJECT-TYPE
Coded Key specific for board and required features. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.5.1SnmpAdminString (SIZE(0..256))read-writecurrent
acSysLicenseKeyActiveList
OBJECT-TYPE
List of all avtivated features. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.5.2SnmpAdminString (SIZE(0..484))read-onlycurrent
acSysFile
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.6
acSysFileCpt
OBJECT-TYPE
Defines Call Progress Tone filenames (downloaded by TFTP). AC INI-Param: CALLPROGRESSTONESFILENAME
1.3.6.1.4.1.5003.9.10.10.1.6.1SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileVp
OBJECT-TYPE
Defines the name (and path) of the file containing the Voice Prompts. Range = String of ASCII characters. AC INI-Param: VOICEPROMPTSFILENAME
1.3.6.1.4.1.5003.9.10.10.1.6.2SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFilePrerecordedTones
OBJECT-TYPE
Defines the name (and path) of the file containing the Prerecorded Tones. Range = String of ASCII characters. AC INI-Param: PrerecordedTonesFileName
1.3.6.1.4.1.5003.9.10.10.1.6.3SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileXml
OBJECT-TYPE
This parameter is used to indicate the name of the file containing the XML file. AC INI-Param: XMLFileName
1.3.6.1.4.1.5003.9.10.10.1.6.4SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileExternalCoder
OBJECT-TYPE
This parameter defines the name of an external coders table. In this table, the user can decide which coders will be used in the system. The original file is a text file, and it is converted by DCONVERT to a bynary file. AC INI-Param: CODERTBLFILENAME
1.3.6.1.4.1.5003.9.10.10.1.6.5SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileUserInfo
OBJECT-TYPE
The file name to be loaded. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.6.6SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileDialPlanFileName
OBJECT-TYPE
This parameter is used to indicate the name of the file containing the Dial Plan. AC INI-Param: gDialPlanFileName
1.3.6.1.4.1.5003.9.10.10.1.6.7SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileTLSPkeyFileName
OBJECT-TYPE
This parameter defines the name of a private key file (internal). Set to blank to regenerate the key and certificate. AC INI-Param: HTTPSPkeyFileName
1.3.6.1.4.1.5003.9.10.10.1.6.8SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileTLSCertFileName
OBJECT-TYPE
Defines the name of the HTTPS server certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSCertFileName
1.3.6.1.4.1.5003.9.10.10.1.6.9SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileTLSRootFileName
OBJECT-TYPE
Defines the name of the HTTPS trusted root certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSRootFileName
1.3.6.1.4.1.5003.9.10.10.1.6.10SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileFirstVideoFontFileName
OBJECT-TYPE
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
1.3.6.1.4.1.5003.9.10.10.1.6.11SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileSecondVideoFontFileName
OBJECT-TYPE
Indicates the name of the second file containing the Video Font file index. AC INI-Param: VideoFontFIleName
1.3.6.1.4.1.5003.9.10.10.1.6.12SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileThirdVideoFontFileName
OBJECT-TYPE
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
1.3.6.1.4.1.5003.9.10.10.1.6.13SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileV5PortConfFileName
OBJECT-TYPE
Indicates the name and location of the V5 Port Configuration file. AC INI-Param: V5PortConfigurationFileName
1.3.6.1.4.1.5003.9.10.10.1.6.14SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysFileAmdSensitivityFileName
OBJECT-TYPE
Name of the AMD Sensitivity auxiliary file. AC INI-Param: AmdSensitivityFileName
1.3.6.1.4.1.5003.9.10.10.1.6.15SnmpAdminString (SIZE(0..47))read-onlycurrent
acSysSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7
acSysSecurityTLSVersion
OBJECT-TYPE
This parameter defines the supported versions of SSL/TLS. When set to 0, SSL/TLS handshakes always start with SSL 2.0 and switch to TLS 1.0 if both peers support it. When set to 1, TLS 1.0 is the only version supported clients attempting to contact the device using SSL 2.0 will be rejected. Possible values: 0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default) 1 = TLS 1.0 will always be used. Access: Online. AC INI-Param: TLSVersion
1.3.6.1.4.1.5003.9.10.10.1.7.1INTEGER {sSL-2-3-and-TLS-1(0), tLS-1-only(1)}read-writecurrent
acSysSecurityOcspEnable
OBJECT-TYPE
Enables or disables certificate checking via OCSP. Access: Instant. AC INI-Param: OcspEnable
1.3.6.1.4.1.5003.9.10.10.1.7.2INTEGER {disabled(0), enabled(1)}read-writecurrent
acSysSecurityOcspServerIPType
OBJECT-TYPE
This parameter defines the OCSP server's IP address Type. 0 - unknown 1 - IPv4 2 - IPv6. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.3InetAddressTyperead-writecurrent
acSysSecurityOcspServerIP
OBJECT-TYPE
This parameter defines the OCSP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspServerIP
1.3.6.1.4.1.5003.9.10.10.1.7.4InetAddressread-writecurrent
acSysSecurityOcspServerPort
OBJECT-TYPE
This parameter defines the OCSP server's TCP port number. Range = 1 to 32767. Access: Instant. AC INI-Param: OcspServerPort
1.3.6.1.4.1.5003.9.10.10.1.7.5Unsigned32 (1..32767)read-writecurrent
acSysSecurityOcspDefaultResponse
OBJECT-TYPE
Determines default OCSP behavior when the server cannot be contacted. 0 = reject peer certificate. 1 = allow peer certificate. . Access: Instant. AC INI-Param: OcspDefaultResponse
1.3.6.1.4.1.5003.9.10.10.1.7.6INTEGER {rejectPeerCertificate(0), allowPeerCertificate(1)}read-writecurrent
acSysSecurityTLSFIPS140Mode
OBJECT-TYPE
Determines whether to enable the FIPS140 mode for TLS. Access: Offline. AC INI-Param: TLS_Fips140_Mode
1.3.6.1.4.1.5003.9.10.10.1.7.7INTEGER {disabled(0), enabled(1)}read-writecurrent
acSysSecurityGenCsrSubjectName
OBJECT-TYPE
generate CSR Subject Name. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.8SnmpAdminString (SIZE(0..600))read-writecurrent
acSysSecuritySelfSignedCertificateSubjectName
OBJECT-TYPE
Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.9SnmpAdminString (SIZE(0..64))read-writecurrent
acSysSecurityOcspSecondaryServerIPType
OBJECT-TYPE
This parameter defines the OCSP secondary server's IP address Type. 0 - unknown 1 - IPv4 2 - IPv6. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.10InetAddressTyperead-writecurrent
acSysSecurityOcspSecondaryServerIP
OBJECT-TYPE
This parameter defines the OCSP secondary server IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspSecondaryServerIP
1.3.6.1.4.1.5003.9.10.10.1.7.11InetAddressread-writecurrent
acSysSecurityHTTPSRequireClientCertificate
OBJECT-TYPE
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Online. AC INI-Param: HTTPSRequireClientCertificate
1.3.6.1.4.1.5003.9.10.10.1.7.12INTEGER {disable(0), enable(1)}read-writecurrent
acSysSecurityAUPDVerifyCertificates
OBJECT-TYPE
This parameter configures the AutoUpdate facility to verify server certificates when using HTTPS. Access: Online. AC INI-Param: AUPDVerifyCertificates
1.3.6.1.4.1.5003.9.10.10.1.7.13INTEGER {disable(0), enable(1)}read-writecurrent
acSysSecurityRequireStrictCertification
OBJECT-TYPE
Verify the certification strictly - for SSL. Access: Online. AC INI-Param: RequireStrictCert
1.3.6.1.4.1.5003.9.10.10.1.7.14INTEGER {disable(0), enable(1)}read-writecurrent
acSysSecurityTLSExpiryCheckStart
OBJECT-TYPE
The system will report when the TLS server certificate is about to expire within this number of days. Access: Instant. AC INI-Param: TLSExpiryCheckStart
1.3.6.1.4.1.5003.9.10.10.1.7.15Unsigned32 (0..3650)read-writecurrent
acSysSecurityTLSExpiryCheckPeriod
OBJECT-TYPE
Defines how often the system will check for TLS server certificate expiry (in days). Access: Instant. AC INI-Param: TLSExpiryCheckPeriod
1.3.6.1.4.1.5003.9.10.10.1.7.16Unsigned32 (1..3650)read-writecurrent
acSysIKE
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.21
acSysIKEPolicyTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.21.1not-accessibleobsolete
acSysIKEPolicyEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1not-accessibleobsolete
acSysIKEPolicyIndex
OBJECT-TYPE
This parameter is used for the Internet Key Encryption (IKE) Index Field for line. Internal parameter. AC INI-Param: IKE_DB_INDEX
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1Unsigned32 (0..19)not-accessibleobsolete
acSysIKEPolicyRowStatus
OBJECT-TYPE
This parameter is used for the Internet Key Encryption (IKE) ROWSTATUS Field for line. Internal parameter. AC INI-Param: IKE_DB_ROWSTATUS
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2RowStatusread-createobsolete
acSysIKEPolicyAction
OBJECT-TYPE
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: IKE_DB_ACTION
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3INTEGER {none(0)}read-createobsolete
acSysIKEPolicyActionRes
OBJECT-TYPE
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: IKE_DB_ACTION_RESULT
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4INTEGER {succeeded(0)}read-onlyobsolete
acSysIKEPolicyShardKey
OBJECT-TYPE
IKE Policy - Shared Key. Access: Instant. AC INI-Param: IKEPOLICYSHAREDKEY
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5SnmpAdminString (SIZE(0..80))read-createobsolete
acSysIKEPolicyLifeInSeconds
OBJECT-TYPE
IKE Policy - IKE SA LifeTime in seconds. Access: Instant. AC INI-Param: IKEPOLICYLIFEINSEC
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6Unsigned32 (0..2147483647)read-createobsolete
acSysIKEPolicyLifeInKB
OBJECT-TYPE
IKE Policy - IKE SA LifeTime in KB. Access: Instant. AC INI-Param: IKEPOLICYLIFEINKB
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7Unsigned32 (0..2147483647)read-createobsolete
acSysIKEPolicyProposal0Encryption
OBJECT-TYPE
IKE Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8INTEGER {dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIKEPolicyProposal1Encryption
OBJECT-TYPE
IKE Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9INTEGER {dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIKEPolicyProposal2Encryption
OBJECT-TYPE
IKE Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10INTEGER {dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIKEPolicyProposal3Encryption
OBJECT-TYPE
IKE Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11INTEGER {dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIKEPolicyProposal0Authentication
OBJECT-TYPE
IKE Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIKEPolicyProposal1Authentication
OBJECT-TYPE
IKE Policy - Proposal 1 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIKEPolicyProposal2Authentication
OBJECT-TYPE
IKE Policy - Proposal 2 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIKEPolicyProposal3Authentication
OBJECT-TYPE
IKE Policy - Proposal 3 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIKEPolicyProposal0DHGroup
OBJECT-TYPE
IKE Policy - Proposal 0 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16INTEGER {dH-786-BIT(0), dH-1024-BIT(1), not-set(10)}read-createobsolete
acSysIKEPolicyProposal1DHGroup
OBJECT-TYPE
IKE Policy - Proposal 1 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17INTEGER {dH-786-BIT(0), dH-1024-BIT(1), not-set(10)}read-createobsolete
acSysIKEPolicyProposal2DHGroup
OBJECT-TYPE
IKE Policy - Proposal 2 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18INTEGER {dH-786-BIT(0), dH-1024-BIT(1), not-set(10)}read-createobsolete
acSysIKEPolicyProposal3DHGroup
OBJECT-TYPE
IKE Policy - Proposal 3 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19INTEGER {dH-786-BIT(0), dH-1024-BIT(1), not-set(10)}read-createobsolete
acSysIKEPolicyAuthenticationMethod
OBJECT-TYPE
This parameter is used for Internet Key Encryption (IKE) Policy - IKE Authentication Method (Preshared key/ RSA). Access: Offline. AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD
1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20INTEGER {presharedKey(0), rsaSignature(1)}read-createobsolete
acSysIPSec
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.22
acSysIPSecEnable
OBJECT-TYPE
IPsec Enable flag. Access: Offline. AC INI-Param: ENABLEIPSEC
1.3.6.1.4.1.5003.9.10.10.1.7.22.1INTEGER {no(0), yes(1)}read-writecurrent
acSysIPSecDpdMode
OBJECT-TYPE
IPsec Dead Peer Detection (RFC 3706) - Mode of Operation. One of the following values: '0' - Disabled (Default) '1' - Periodic '2' - On demand. Access: Instant. AC INI-Param: IPSECDPDMODE
1.3.6.1.4.1.5003.9.10.10.1.7.22.2INTEGER {disabled(0), periodic(1), ondemand(2)}read-writecurrent
acSysIPSecIKECertificateExtValidate
OBJECT-TYPE
Enables or disables certificate extension checking for IKE. Access: Instant. AC INI-Param: IKEcertificateExtValidate
1.3.6.1.4.1.5003.9.10.10.1.7.22.3INTEGER {disabled(0), enabled(1)}read-writecurrent
acSysIPSecSPDTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.22.21not-accessibleobsolete
acSysIPSecSPDEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1not-accessibleobsolete
acSysIPSecSPDIndex
OBJECT-TYPE
Security Policy Database (SPD) Index Field for line. Internal parameter. AC INI-Param: SPD_INDEX
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1Unsigned32 (0..19)not-accessibleobsolete
acSysIPSecSPDRowStatus
OBJECT-TYPE
Security Policy Database (SPD) ROWSTATUS field for line. Internal parameter. AC INI-Param: SPD_ROWSTATUS
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2RowStatusread-createobsolete
acSysIPSecSPDAction
OBJECT-TYPE
Security Policy Database (SPD) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: SPD_ACTION
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3INTEGER {none(0)}read-createobsolete
acSysIPSecSPDActionRes
OBJECT-TYPE
Security Policy Database (SPD) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: SPD_ACTION_RESULT
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4INTEGER {succeeded(0)}read-onlyobsolete
acSysIPSecSPDPolicyRemoteIPAddr
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Remote IP address as IP or Host Name. Access: Instant. AC INI-Param: IPSECPOLICYREMOTEIPADDRESS
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5SnmpAdminString (SIZE(0..99))read-createobsolete
acSysIPSecSPDPolicySrcPort
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Source Port. Access: Instant. AC INI-Param: IPSECPOLICYSRCPORT
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6Unsigned32 (0..65536)read-createobsolete
acSysIPSecSPDPolicyDestPort
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Destination Port. Access: Instant. AC INI-Param: IPSECPOLICYDSTPORT
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7Unsigned32 (0..65536)read-createobsolete
acSysIPSecSPDPolicyProtocol
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Protocol. Access: Instant. AC INI-Param: IPSECPOLICYPROTOCOL
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8Unsigned32 (0..255)read-createobsolete
acSysIPSecSPDKeyExchangeMethodIndex
OBJECT-TYPE
This parameter is used for the Secure Internet Protocol (IPsec) Policy - Index into the Key Exchange Method Table (IKE Table). Access: Offline. AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9Unsigned32 (0..2147483647)read-createobsolete
acSysIPSecSPDLifeInSeconds
OBJECT-TYPE
IPsec Policy - IPSec SA LifeTime in seconds. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINSEC
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10Unsigned32 (0..2147483647)read-createobsolete
acSysIPSecSPDLifeInKB
OBJECT-TYPE
IPsec Policy - IPSec SA LifeTime in KB. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINKB
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11Unsigned32 (0..2147483647)read-createobsolete
acSysIPSecSPDProposal0Encryption
OBJECT-TYPE
IPsec Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12INTEGER {none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIPSecSPDProposal1Encryption
OBJECT-TYPE
IPsec Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13INTEGER {none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIPSecSPDProposal2Encryption
OBJECT-TYPE
IPsec Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14INTEGER {none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIPSecSPDProposal3Encryption
OBJECT-TYPE
IPsec Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15INTEGER {none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)}read-createobsolete
acSysIPSecSPDProposal0Authentication
OBJECT-TYPE
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIPSecSPDProposal1Authentication
OBJECT-TYPE
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIPSecSPDProposal2Authentication
OBJECT-TYPE
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIPSecSPDProposal3Authentication
OBJECT-TYPE
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19INTEGER {hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)}read-createobsolete
acSysIPSecSPDPolicyLocalIPAddrType
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy - Local IP address type (OAM/Control). Access: Offline. AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20INTEGER {oam(0), control(2)}read-createobsolete
acSysIPSecSPDMode
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy - Mode of Operation (Transport/Tunneling). '0' - Transport '1' - Tunneling. Access: Instant. AC INI-Param: IPSECMODE
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21INTEGER {transport(0), tunneling(1)}read-createobsolete
acSysIPSecSPDPolicyRemoteTunnelIPAddress
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22IpAddressread-createobsolete
acSysIPSecSPDPolicyLocalTunnelIPAddress
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23IpAddressread-createobsolete
acSysIPSecSPDPolicyRemoteTunnelSubnetMask
OBJECT-TYPE
This parameter is used for Secure Internet Protocol (IPsec) Policy - Subnet Mask of the Remote IPSec Address. Access: Instant. AC INI-Param: IPSECPOLICYREMOTESUBNETMASK
1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24IpAddressread-createobsolete
acSysIPsecProposalTable
OBJECT-TYPE
IPsec Proposal table
1.3.6.1.4.1.5003.9.10.10.1.7.22.22not-accessiblecurrent
acSysIPsecProposalEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1not-accessiblecurrent
acSysIPsecProposalIndex
OBJECT-TYPE
Index Field for line. AC INI-Param: IPsecProposalTable_Index
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1Unsigned32 (0..4)not-accessiblecurrent
acSysIPsecProposalRowStatus
OBJECT-TYPE
ROWSTATUS Field for line. AC INI-Param: IPsecProposalTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2RowStatusread-createcurrent
acSysIPsecProposalAction
OBJECT-TYPE
Mangement Field for ACTIONS. AC INI-Param: IPsecProposalTable_Action
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3INTEGER {none(0)}read-createcurrent
acSysIPsecProposalActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecProposalTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysIPsecProposalEncryptionAlgorithm
OBJECT-TYPE
Selects the encryption (privacy) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_EncryptionAlgorithm
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5INTEGER {none(0), desCbc(1), tripleDesCbc(2), aes(3)}read-createcurrent
acSysIPsecProposalAuthenticationAlgorithm
OBJECT-TYPE
Selects the message authentication (integrity) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6INTEGER {none(0), hmacSha1-96(2), hmacMd5-96(4)}read-createcurrent
acSysIPsecProposalDiffieHellmanGroup
OBJECT-TYPE
Selects the Diffie-Hellman group to use. Access: Online. AC INI-Param: IPsecProposalTable_DHGroup
1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7INTEGER {group1-768Bits(0), group2-1024Bits(1)}read-createcurrent
acSysIPsecSATable
OBJECT-TYPE
IPsec SA table
1.3.6.1.4.1.5003.9.10.10.1.7.22.23not-accessiblecurrent
acSysIPsecSAEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1not-accessiblecurrent
acSysIPsecSAIndex
OBJECT-TYPE
Index Field for line. AC INI-Param: IPsecSATable_Index
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1Unsigned32 (0..20)not-accessiblecurrent
acSysIPsecSARowStatus
OBJECT-TYPE
ROWSTATUS Field for line. AC INI-Param: IPsecSATable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2RowStatusread-createcurrent
acSysIPsecSAAction
OBJECT-TYPE
Mangement Field for ACTIONS. AC INI-Param: IPsecSATable_Action
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3Unsigned32 (0)read-createcurrent
acSysIPsecSAActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecSATable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4Unsigned32 (0)read-onlycurrent
acSysIPsecSARemoteEndpointAddress
OBJECT-TYPE
IP address or DNS host name of the peer. Access: Online. AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5SnmpAdminString (SIZE(0..98))read-createcurrent
acSysIPsecSAAuthenticationMethod
OBJECT-TYPE
Selects the method used for peer authentication during IKE main mode. Access: Online. AC INI-Param: IPsecSATable_AuthenticationMethod
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6INTEGER {presharedKey(0), rSASignature(1)}read-createcurrent
acSysIPsecSASharedKey
OBJECT-TYPE
Defines the pre-shared key (in textual format). Access: Online. AC INI-Param: IPsecSATable_SharedKey
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7SnmpAdminString (SIZE(0..79))read-createcurrent
acSysIPsecSASourcePort
OBJECT-TYPE
Defines the source port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_SourcePort
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8Unsigned32 (0..65535)read-createcurrent
acSysIPsecSADestPort
OBJECT-TYPE
Defines the destination port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_DestPort
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9Unsigned32 (0..65535)read-createcurrent
acSysIPsecSAProtocol
OBJECT-TYPE
Defines the protocol type to which this configuration applies. Standard IP protocol numbers should be used, e.g.: 0 = Any protocol (default) 17 = UDP 6 = TCP . Access: Online. AC INI-Param: IPsecSATable_Protocol
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10Unsigned32 (0..255)read-createcurrent
acSysIPsecSAPhase1SaLifetimeInSec
OBJECT-TYPE
Determines the duration (in seconds) for which the negotiated IKE SA (main mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11Unsigned32 (0..2147483647)read-createcurrent
acSysIPsecSAPhase2SaLifetimeInSec
OBJECT-TYPE
Determines the duration (in seconds) for which the negotiated IPSec SA (quick mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12Unsigned32 (0..2147483647)read-createcurrent
acSysIPsecSAPhase2SaLifetimeInKB
OBJECT-TYPE
Determines the maximum volume of traffic (in kilobytes) for which the negotiated IPSec SA (quick mode) is valid. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13Unsigned32 (0..2147483647)read-createcurrent
acSysIPsecSADPDmode
OBJECT-TYPE
Controls dead peer detection (DPD) as per RFC 3706. Access: Online. AC INI-Param: IPsecSATable_DPDmode
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14INTEGER {dPDDisabled(0), dPDPeriodic(1), dPDOnDemand(2)}read-createcurrent
acSysIPsecSAIPsecMode
OBJECT-TYPE
Selects the IPSec mode of operation. 0 = Transport mode (default) 1 = Tunnel mode . Access: Online. AC INI-Param: IPsecSATable_IPsecMode
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15INTEGER {transport(0), tunnel(1)}read-createcurrent
acSysIPsecSARemoteTunnelAddress
OBJECT-TYPE
IP address of the peer router. Access: Online. AC INI-Param: IPsecSATable_RemoteTunnelAddress
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16SnmpAdminString (SIZE(0..45))read-createcurrent
acSysIPsecSARemoteSubnetIPAddress
OBJECT-TYPE
IP address of the remote subnetwork. Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetIPAddress
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17SnmpAdminString (SIZE(0..45))read-createcurrent
acSysIPsecSARemoteSubnetPrefixLength
OBJECT-TYPE
Prefix length of the Remote Subnet IP Address parameter (in bits). Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18Unsigned32 (0..128)read-createcurrent
acSysIPsecSAInterfaceName
OBJECT-TYPE
Select the OID of the interface name corresponding to the one appearing in the interface table. The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11. acSysInterfaceIndex Note: when ignore a default value will be SET: 0.0. Access: Online. AC INI-Param: IPsecSATable_InterfaceName
1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.19RowPointerread-createcurrent
acFirewall
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.23
acSysAccessListTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.23.1not-accessiblecurrent
acSysAccessListEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1not-accessiblecurrent
acSysAccessListIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: ACCESSLIST_Index
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1Unsigned32 (0..49)not-accessiblecurrent
acSysAccessListRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2RowStatusread-createcurrent
acSysAccessListAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3INTEGER {none(0)}read-createcurrent
acSysAccessListActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysAccessListSourceIP
OBJECT-TYPE
Source IP for access rule. Access: Online. AC INI-Param: ACCESSLIST_Source_IP
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5SnmpAdminString (SIZE(0..60))read-createcurrent
acSysAccessListNetMask
OBJECT-TYPE
Mask for this access rule (bitwise ANDed with the source IP of the packet). Access: Online. AC INI-Param: ACCESSLIST_Net_Mask
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6IpAddressread-createdeprecated
acSysAccessListStartPort
OBJECT-TYPE
Port range - start. Access: Online. AC INI-Param: ACCESSLIST_Start_Port
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7Unsigned32 (0..65535)read-createcurrent
acSysAccessListEndPort
OBJECT-TYPE
Port range - end. Access: Online. AC INI-Param: ACCESSLIST_End_Port
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8Unsigned32 (0..65535)read-createcurrent
acSysAccessListProtocol
OBJECT-TYPE
IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP, ANY or numeric value). Access: Online. AC INI-Param: ACCESSLIST_Protocol
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9SnmpAdminString (SIZE(0..10))read-createcurrent
acSysAccessListPacketSize
OBJECT-TYPE
Maximum packet size (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Packet_Size
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10Unsigned32 (0..65535)read-createcurrent
acSysAccessListByteRate
OBJECT-TYPE
Allowed traffic in bytes per second (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Rate
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11Unsigned32 (0..2147483647)read-createcurrent
acSysAccessListByteBurst
OBJECT-TYPE
Allowed traffic burst in bytes (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Burst
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12Unsigned32 (0..2147483647)read-createcurrent
acSysAccessListAllowType
OBJECT-TYPE
Allow or block traffic matching this rule. Access: Online. AC INI-Param: ACCESSLIST_Allow_Type
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13INTEGER {notSet(0), allow(1), block(2)}read-createcurrent
acSysAccessListMatchCount
OBJECT-TYPE
Statistics: number of matched packets. AC INI-Param: ACCESSLIST_MatchCount
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14Unsigned32 (0..65535)read-onlycurrent
acSysAccessListInterfaceName
OBJECT-TYPE
Name of the specific interface the rule applies to. None - default value when no interface was chosen. Access: Online. AC INI-Param: ACCESSLIST_Interface_ID
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.15SnmpAdminString (SIZE(0..15))read-createcurrent
acSysAccessListUseSpecificInterface
OBJECT-TYPE
Rule for specific interface or for the entire interfaces. Access: Online. AC INI-Param: ACCESSLIST_Use_Specific_Interface
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.16INTEGER {disable(0), enable(1)}read-createcurrent
acSysAccessListSourcePort
OBJECT-TYPE
Source Port. Access: Online. AC INI-Param: ACCESSLIST_Source_Port
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.17Unsigned32 (0..65535)read-createcurrent
acSysAccessListPrefixLength
OBJECT-TYPE
Prefix length of source IP address (defining a subnet). Access: Online. AC INI-Param: ACCESSLIST_PrefixLen
1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.18Unsigned32 (0..128)read-createcurrent
acSysMediaEncription
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.24
acSysMediaEncriptionRTPAuthenticationDisableTx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Authentication on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableTx
1.3.6.1.4.1.5003.9.10.10.1.7.24.1INTEGER {inactive(0), active(1)}read-writecurrent
acSysMediaEncriptionRTPAuthenticationDisableRx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Authentication on received RTP packets 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableRx
1.3.6.1.4.1.5003.9.10.10.1.7.24.2INTEGER {inactive(0), active(1)}read-writecurrent
acSysMediaEncriptionRTPEncryptionDisableTx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableTx
1.3.6.1.4.1.5003.9.10.10.1.7.24.3INTEGER {inactive(0), active(1)}read-writecurrent
acSysMediaEncriptionRTPEncryptionDisableRx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableRx
1.3.6.1.4.1.5003.9.10.10.1.7.24.4INTEGER {inactive(0), active(1)}read-writecurrent
acSysMediaEncriptionRTCPEncryptionDisableTx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Encryption on transmitted RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableTx
1.3.6.1.4.1.5003.9.10.10.1.7.24.5INTEGER {inactive(0), active(1)}read-writecurrent
acSysMediaEncriptionRTCPEncryptionDisableRx
OBJECT-TYPE
On a secured RTP session, determines whether to enable Encryption on received RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableRx
1.3.6.1.4.1.5003.9.10.10.1.7.24.6INTEGER {inactive(0), active(1)}read-writecurrent
acSysSRTP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.24.21
acSysSRTPPacketMKISize
OBJECT-TYPE
Determines the size of the parameter Master Key Identifier (MKI) in SRTP Tx packets. One of the following values: 0 = MKI Disabled 1 - 4 = size (bytes of MKI). Access: Online. AC INI-Param: SRTPTxPacketMKISize
1.3.6.1.4.1.5003.9.10.10.1.7.24.21.1Unsigned32 (0..4)read-writecurrent
acSys802dot1x
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.7.25
acSys802dot1xMode
OBJECT-TYPE
Enables support for IEEE 802.1x physical port security. 0 = Disabled 1 = EAP-MD5 2 = Protected EAP (PEAP) 3 = EAP-TLS . Access: Instant. AC INI-Param: 802.1xMode
1.3.6.1.4.1.5003.9.10.10.1.7.25.1INTEGER {disabled(0), eapMd5(1), protectedEap(2), eapTls(3)}read-writecurrent
acSys802dot1xUsername
OBJECT-TYPE
Username for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xUsername
1.3.6.1.4.1.5003.9.10.10.1.7.25.2SnmpAdminString (SIZE(0..31))read-writecurrent
acSys802dot1xPassword
OBJECT-TYPE
Password for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xPassword
1.3.6.1.4.1.5003.9.10.10.1.7.25.3SnmpAdminString (SIZE(0..31))read-writecurrent
acSys802dot1xVerifyPeerCertificate
OBJECT-TYPE
Verify Peer Certificate for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xVerifyPeerCertificate
1.3.6.1.4.1.5003.9.10.10.1.7.25.4INTEGER {disable(0), enable(1)}read-writecurrent
acSysSerialIF
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.8
acSysSerialIFBaudRate
OBJECT-TYPE
Enables changes to the Serial Baud Rate for Simplified Message Desk Interface (SMDI). Standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600, 115200. Access: Offline. AC INI-Param: SerialBaudRate
1.3.6.1.4.1.5003.9.10.10.1.8.1INTEGER {r1200(1200), r2400(2400), r4800(4800), r9600(9600), r14400(14400), r19200(19200), r38400(38400), r57600(57600), r115200(115200)}read-writecurrent
acSysSerialIFData
OBJECT-TYPE
Changes the serial data bit for the Simplified Message Desk Interface (SMDI). 7 = 7 Bit 8 = 8 Bit. Access: Offline. AC INI-Param: SerialData
1.3.6.1.4.1.5003.9.10.10.1.8.2Unsigned32 (7..8)read-writecurrent
acSysSerialIFParity
OBJECT-TYPE
Changes the serial parity for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Odd 2 = Even. Access: Offline. AC INI-Param: SerialParity
1.3.6.1.4.1.5003.9.10.10.1.8.3INTEGER {none(0), odd(1), even(2)}read-writecurrent
acSysSerialIFStop
OBJECT-TYPE
Changes the serial stop for the Simplified Message Desk Interface (SMDI). 1 = 1 Bit 2 = 2 Bit. Access: Offline. AC INI-Param: SerialStop
1.3.6.1.4.1.5003.9.10.10.1.8.4Unsigned32 (1..2)read-writecurrent
acSysSerialIFFlowControl
OBJECT-TYPE
Changes the serial flow control for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Hardware. Access: Offline. AC INI-Param: SerialFlowControl
1.3.6.1.4.1.5003.9.10.10.1.8.5INTEGER {none(0), hardware(1)}read-writecurrent
acVoiceStream
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.9
acVoiceStreamStatus
OBJECT-TYPE
Enables/disables the voice streaming for all voice source types (HTTP, NFS, Local Storage). When enabled, the module requires some system resources, such as tasks and memory allocation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.9.1INTEGER {disabled(0), enabled(1)}read-writecurrent
acVoiceStreamUploadMethod
OBJECT-TYPE
Defines the HTTP request type for uploading the voice stream to the file server. 0 = POST 1 = PUT. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.9.2INTEGER {httpPostMethod(0), httpPutMethod(1)}read-writecurrent
acVoiceStreamUploadPostUri
OBJECT-TYPE
Defines the URI used on the POST request, to upload voice data from the media server to a web server. This parameter is used only when using the HTTP POST for recording and the command is not issued by the Lib (tpncp protocol). The path needs to be set to the upload script on the web server. . Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.9.3SnmpAdminString (SIZE(0..59))read-writecurrent
acSysAMS
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.10
acSysAMSProfile
OBJECT-TYPE
Enable/Disable AMS Advanced IVR play functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: AMSProfile
1.3.6.1.4.1.5003.9.10.10.1.10.1Unsigned32 (0..7)read-writecurrent
acSysAMSApsIpAddress
OBJECT-TYPE
Sets the destination UDP port to which the Heartbeat Packets are sent. Range = IP address in dotted notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Offline. AC INI-Param: HeartbeatDestIP
1.3.6.1.4.1.5003.9.10.10.1.10.2IpAddressread-writecurrent
acSysAMSApsPort
OBJECT-TYPE
Sets the destination UDP port to which the heartbeat packets are sent. Access: Offline. AC INI-Param: HeartbeatDestPort
1.3.6.1.4.1.5003.9.10.10.1.10.3Unsigned32 (0..64000)read-writecurrent
acSysAMSPrimaryLanguage
OBJECT-TYPE
Defines the Primary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSPrimaryLanguage
1.3.6.1.4.1.5003.9.10.10.1.10.4SnmpAdminString (SIZE(0..3))read-writecurrent
acSysAMSSecondaryLanguage
OBJECT-TYPE
Defines the Secondary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSSecondaryLanguage
1.3.6.1.4.1.5003.9.10.10.1.10.5SnmpAdminString (SIZE(0..3))read-writecurrent
acSysAMSAPSProfile
OBJECT-TYPE
Indicates if the system should expect to use APS bundle (vp.dat and segments.xml files), or if the system should expect the vp.dat file only. A 1 means that an APS bundle should be used. A 0 means that the system should use vp.dat only. The default setting is 1, meaning expect APS bundle. Access: Offline. AC INI-Param: APSEnabled
1.3.6.1.4.1.5003.9.10.10.1.10.6INTEGER {vpDatProvidedAudio(0), apsProvidedAudio(1)}read-writecurrent
acSysAMSForceRepositoryEnable
OBJECT-TYPE
Indicates that a new audio repository (consisting of VP and XML files) should always be uploaded to the board regardless of whether signals are still being played on the old repository. Access: Instant. AC INI-Param: AMSForceRepositoryUpdateEnabled
1.3.6.1.4.1.5003.9.10.10.1.10.7INTEGER {disable(0), enable(1)}read-writecurrent
acSysNetworkFileSystem
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.11
acSysNFSTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.11.21not-accessiblecurrent
acSysNFSEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.11.21.1not-accessiblecurrent
acSysNFSIndex
OBJECT-TYPE
Index Field for line. Internal parameter. Index can be up to 15 in dependency of board type. AC INI-Param: NFSServers_Index
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1Unsigned32 (0..15)not-accessiblecurrent
acSysNFSRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2RowStatusread-createcurrent
acSysNFSAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3INTEGER {none(0)}read-createcurrent
acSysNFSActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysNFSHostOrIP
OBJECT-TYPE
The domain name or IP address of the NFS server. If a domain name is provided, then a DNS server must be configured. Access: Online. AC INI-Param: NFSServers_HostOrIP
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5SnmpAdminString (SIZE(0..39))read-createcurrent
acSysNFSRootPath
OBJECT-TYPE
Path to the root of the exported file system. Access: Online. AC INI-Param: NFSServers_RootPath
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6SnmpAdminString (SIZE(0..99))read-createcurrent
acSysNFSNfsVersion
OBJECT-TYPE
NFS version to use with this remote file system, 2 or 3 (default). Access: Online. AC INI-Param: NFSServers_NfsVersion
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7INTEGER {v2(2), v3(3)}read-createcurrent
acSysNFSAuthType
OBJECT-TYPE
Identifies the authentication method used with this remote file system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default). Access: Online. AC INI-Param: NFSServers_AuthType
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8INTEGER {null(0), unix(1)}read-createcurrent
acSysNFSUID
OBJECT-TYPE
User ID used in authentication if using AUTH_UNIX. The default is 0. Access: Online. AC INI-Param: NFSServers_UID
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9Unsigned32 (0..2147483647)read-createcurrent
acSysNFSGID
OBJECT-TYPE
Group ID used in authentication if using AUTH_UNIX. The default is 1. Access: Online. AC INI-Param: NFSServers_GID
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10Unsigned32 (0..2147483647)read-createcurrent
acSysNFSVlanType
OBJECT-TYPE
The VLAN, OAM(0) or Media(1), to use when accessing this remote file system. The default is to use the media VLAN. This parameters applies only if multiple IP addresses are configured on this board. Access: Online. AC INI-Param: NFSServers_VlanType
1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11INTEGER {oam(0), media(1)}read-createcurrent
acSysHA
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.12
acSysHAGlobalIPAddress
OBJECT-TYPE
Defines the M3K global IP address to be used by the active module in HA system. (Dotted format notation. e.g., 192.10.1.255). Range = Legal IP address. Access: Offline. AC INI-Param: M3KGlobalIpAddr
1.3.6.1.4.1.5003.9.10.10.1.12.1IpAddressread-writeobsolete
acSysHARemoteAddress
OBJECT-TYPE
Defines the Maintenance IF IP address of the remote HA unit. Relevant to M4K and SW-SBC. Access: Offline. AC INI-Param: HARemoteAddress
1.3.6.1.4.1.5003.9.10.10.1.12.2IpAddressread-writecurrent
acSysHARevertive
OBJECT-TYPE
When enabled, unit with higher HA priority will take the active state in HA system. Relevant to M4K and SW-SBC. Access: Offline. AC INI-Param: HARevertiveEnabled
1.3.6.1.4.1.5003.9.10.10.1.12.3INTEGER {disable(0), enable(1)}read-writecurrent
acSysHAPriority
OBJECT-TYPE
Enables the user to define the HA priority to decide if unit should be in Active or Redundant state (Valid only when acSysHARevertive is set) Relevant to M4K and SW-SBC. Access: Offline. AC INI-Param: HAPriority
1.3.6.1.4.1.5003.9.10.10.1.12.4Unsigned32 (1..10)read-writecurrent
acSysHARedundantPriority
OBJECT-TYPE
Enables the user to define the Redundant HA priority to decide if unit should be in Active or Redundant state. Valid range is 1-10. Relevant to M4K and SW-SBC. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.1.12.5Unsigned32 (1..10)read-writecurrent
acSysHAPingEnabled
OBJECT-TYPE
Enabling network monitor using ping to test reachability from defined source interface, a drop in reachability will trigger switch over to redundant unit. Access: Online. AC INI-Param: HAPingEnabled
1.3.6.1.4.1.5003.9.10.10.1.12.6INTEGER {disable(0), enable(1)}read-writecurrent
acSysHAPingDestination
OBJECT-TYPE
Defines the ping destination IP address of HA network monitor reachability module. Access: Online. AC INI-Param: HAPingDestination
1.3.6.1.4.1.5003.9.10.10.1.12.7IpAddressread-writecurrent
acSysHAPingSourceIfName
OBJECT-TYPE
Defines the ping source inteface to test for HA network monitor reachability module. Access: Online. AC INI-Param: HAPingSourceIfName
1.3.6.1.4.1.5003.9.10.10.1.12.8SnmpAdminString (SIZE(0..16))read-writecurrent
acSysHAPingTimeout
OBJECT-TYPE
Defines the ping time out value in seconds for HA network monitor reachability module. Access: Online. AC INI-Param: HAPingTimeout
1.3.6.1.4.1.5003.9.10.10.1.12.9Unsigned32 (1..60)read-writecurrent
acSysHAPingRetries
OBJECT-TYPE
Defines the ping retries value for HA network monitor reachability module. Access: Online. AC INI-Param: HAPingRetries
1.3.6.1.4.1.5003.9.10.10.1.12.10Unsigned32 (0..100)read-writecurrent
acSysTransmission
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.13
acSysTransmissionType
OBJECT-TYPE
Sets the PSTN Transmission type for the board: optical SONET / SDH or copper DS3. Access: Offline. AC INI-Param: PSTNTransmissionType
1.3.6.1.4.1.5003.9.10.10.1.13.1INTEGER {none(0), opticalSonetSdh(1), copperDs3(2), copperE1Ds1(3)}read-writecurrent
acSysTiming
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.14
acSysTimingMode
OBJECT-TYPE
Determines the PSTN Timing synchonization mode of the Gateway. One of the following values: TM_External_MODE(1) -External Timing mode - use the SAT trunks Centralized Line Timing to synchronize the Gateway with one of the PSTN interfaces. TM_LineSync_MODE(2) -Distributed Line Timing mode (for the 1610 boards)- without using the SAT timing module. TM_Standalone_MODE(0) -Non-synchronized mode - each board or TPM is synchronized internally from one of the PSTN interfaces without using the SAT timing module. Access: Online. AC INI-Param: TMMode
1.3.6.1.4.1.5003.9.10.10.1.14.1INTEGER {standAlone(0), external(1), lineSync(2)}read-writecurrent
acSysTimingValidationTime
OBJECT-TYPE
Reference validation time. Applicable for External timing and Line timing timing references. Range: 0 - 15 minutes. Resolution: 1 minute. Access: Online. AC INI-Param: TMReferenceValidationTime
1.3.6.1.4.1.5003.9.10.10.1.14.2Unsigned32 (0..15)read-writecurrent
acSysTimingClockToDeriveA
OBJECT-TYPE
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_A
1.3.6.1.4.1.5003.9.10.10.1.14.3INTEGER {deriveREFFromLineClock1(0), deriveInternalClock(4), clockFromReceiveSide(7)}read-writeobsolete
acSysTimingClockToDeriveB
OBJECT-TYPE
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_B
1.3.6.1.4.1.5003.9.10.10.1.14.4INTEGER {deriveREFFromLineClock1(0), deriveInternalClock(4), clockFromReceiveSide(7)}read-writeobsolete
acSysTimingExternalIFType
OBJECT-TYPE
Defines the external line reference (BITS) transmission format. Access: Online. AC INI-Param: TMExternalIFType
1.3.6.1.4.1.5003.9.10.10.1.14.5INTEGER {e1CRC4(0), e1CAS(1), e1FAS(2), t1D4(3), t1ESF(4), t12(5)}read-writecurrent
acSysTimingLoopBackRef1
OBJECT-TYPE
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef1
1.3.6.1.4.1.5003.9.10.10.1.14.6INTEGER {loopDisable(0), loopEnable(1)}read-writecurrent
acSysTimingLoopBackRef2
OBJECT-TYPE
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef2
1.3.6.1.4.1.5003.9.10.10.1.14.7INTEGER {loopDisable(0), loopEnable(1)}read-writecurrent
acSysTimingTransmitControl
OBJECT-TYPE
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMTransmitControl
1.3.6.1.4.1.5003.9.10.10.1.14.8INTEGER {systemClock(0), aIS(1), disableTransmit(2)}read-writeobsolete
acSysTimingE1LineBuildOut
OBJECT-TYPE
Sets the transmission power between the timing module on the SAT and the E1 external reference clock (ohms). This parameter is only relevant for the Mediant 3000.This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1). Access: Online. AC INI-Param: TME1LineBuildOut
1.3.6.1.4.1.5003.9.10.10.1.14.9INTEGER {tm75OhmNormal(0), tm120OhmNormal(1), tm75OhmHighReturnLoss(4), tm120OhmHighReturnLoss(5), tm75OhmNormalGappedClock(6), tm120OhmNormalGappedClock(7)}read-writeobsolete
acSysTimingT1LineBuildOut
OBJECT-TYPE
External Reference Transmit Line Build Out. Access: Online. AC INI-Param: TMT1LineBuildOut
1.3.6.1.4.1.5003.9.10.10.1.14.10INTEGER {dSX10to133feet0dBCSU(0), dSX1133to266feet(1), dSX1266to399feet(2), dSX1399to533feet(3), dSX1533to655feet(4), dSX10to133ft0dBgappedclock(7)}read-writeobsolete
acSysLDAP
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.15
acSysLDAPServerIp
OBJECT-TYPE
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Online. AC INI-Param: LDAPSERVERIP
1.3.6.1.4.1.5003.9.10.10.1.15.1IpAddressread-writedeprecated
acSysLDAPServerPort
OBJECT-TYPE
Defines the port number for the LDAP server. Range = Valid port number. Access: Online. AC INI-Param: LDAPSERVERPORT
1.3.6.1.4.1.5003.9.10.10.1.15.2Unsigned32 (0..65535)read-writedeprecated
acSysLDAPServerMaxRespondTime
OBJECT-TYPE
Defines the period of time the module will wait for LDAP server response (seconds). Access: Instant. AC INI-Param: LDAPSERVERMAXRESPONDTIME
1.3.6.1.4.1.5003.9.10.10.1.15.3Unsigned32 (0..86400)read-writedeprecated
acSysLDAPServerDomainName
OBJECT-TYPE
This parameter is used to indicate the name of LDAP server. Access: Online. AC INI-Param: LDAPSERVERDOMAINNAME
1.3.6.1.4.1.5003.9.10.10.1.15.4SnmpAdminString (SIZE(0..255))read-writedeprecated
acSysLDAPSearchDN
OBJECT-TYPE
This parameter is used to indicate the search DN for LDAP search request. Access: Online. AC INI-Param: LDAPSEARCHDN
1.3.6.1.4.1.5003.9.10.10.1.15.5SnmpAdminString (SIZE(0..255))read-writedeprecated
acSysLDAPPassword
OBJECT-TYPE
This parameter is used to indicate the user password of LDAP server. Access: Online. AC INI-Param: LDAPPASSWORD
1.3.6.1.4.1.5003.9.10.10.1.15.6SnmpAdminString (SIZE(0..255))read-writedeprecated
acSysLDAPBindDN
OBJECT-TYPE
This parameter is used to indicate the of LDAP server bind DN. Access: Online. AC INI-Param: LDAPBINDDN
1.3.6.1.4.1.5003.9.10.10.1.15.7SnmpAdminString (SIZE(0..255))read-writedeprecated
acSysLDAPServiceEnable
OBJECT-TYPE
Used to either enable or disable LDAP service. 0- disable (default) 1 - enable. Access: Offline. AC INI-Param: LDAPSERVICEENABLE
1.3.6.1.4.1.5003.9.10.10.1.15.8INTEGER {disable(0), enable(1)}read-writecurrent
acSysLDAPCacheEnable
OBJECT-TYPE
Enables/Disable using the cashe in LDAP. 0- disable (default) 1 - enable. Access: Offline. AC INI-Param: LDAPCACHEENABLE
1.3.6.1.4.1.5003.9.10.10.1.15.9INTEGER {disable(0), enable(1)}read-writecurrent
acSysLDAPCacheEntryTimeout
OBJECT-TYPE
The time (in seconds) that an entry in the LDAP cache is valid. Access: Online. AC INI-Param: LDAPCACHEENTRYTIMEOUT
1.3.6.1.4.1.5003.9.10.10.1.15.10Unsigned32 (0..2147483647)read-writecurrent
acSysLDAPCacheEntryRemovalTimeout
OBJECT-TYPE
The time (in seconds) that an entry in the LDAP cache is removed from cache. Access: Online. AC INI-Param: LDAPCACHEENTRYREMOVALTIMEOUT
1.3.6.1.4.1.5003.9.10.10.1.15.11Unsigned32 (0..2147483647)read-writecurrent
asSysNqm
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.1.16
acSysNqmSenderTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.21not-accessiblecurrent
acSysNqmSenderEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.21.1not-accessiblecurrent
acSysNqmSenderIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: NqmSenderTable_Index
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.1Unsigned32 (0..9)not-accessiblecurrent
acSysNqmSenderRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: NqmSenderTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.2RowStatusread-createcurrent
acSysNqmSenderAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: NqmSenderTable_Action
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.3INTEGER {none(0)}read-createcurrent
acSysNqmSenderActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: NqmSenderTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysNqmSenderSenderName
OBJECT-TYPE
Sender descriptive name. Access: Online. AC INI-Param: NqmSenderTable_SenderName
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.5SnmpAdminString (SIZE(0..64))read-createcurrent
acSysNqmSenderActive
OBJECT-TYPE
Sender enable. Access: Online. AC INI-Param: NqmSenderTable_Active
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.6INTEGER {disable(0), enable(1)}read-createcurrent
acSysNqmSenderTargetIpAddress
OBJECT-TYPE
Target IP address. Access: Online. AC INI-Param: NqmSenderTable_TargetIpAddress
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.7SnmpAdminString (SIZE(0..45))read-createcurrent
acSysNqmSenderTargetPort
OBJECT-TYPE
Target transport layer port number. Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970, 3980, 3990. Access: Online. AC INI-Param: NqmSenderTable_TargetPort
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.8Unsigned32 (3900..3990)read-createcurrent
acSysNqmSenderPacketInterval
OBJECT-TYPE
Interval between each packet transmitting [msec]. Access: Online. AC INI-Param: NqmSenderTable_PacketInterval
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.9Unsigned32 (5..1000)read-createcurrent
acSysNqmSenderPayloadSize
OBJECT-TYPE
Size of IP payload [bytes]. Access: Online. AC INI-Param: NqmSenderTable_PayloadSize
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.10Unsigned32 (28..1420)read-createcurrent
acSysNqmSenderIpTos
OBJECT-TYPE
TOS value in the IP header. Access: Online. AC INI-Param: NqmSenderTable_IpTos
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.11Unsigned32 (0..255)read-createcurrent
acSysNqmSenderTimeout
OBJECT-TYPE
Receive timeout on expected packet. Access: Online. AC INI-Param: NqmSenderTable_Timeout
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.12Unsigned32 (0..32000)read-createcurrent
acSysNqmSenderRttThreshold
OBJECT-TYPE
Maximum allowable Round Trip Time [msec], if exceeded some action is needed. Access: Online. AC INI-Param: NqmSenderTable_RttThreshold
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.13Unsigned32 (0..32000)read-createcurrent
acSysNqmSenderJitterThreshold
OBJECT-TYPE
Maximum allowable Jitter [msec], if exceeded some action is needed. Access: Online. AC INI-Param: NqmSenderTable_JitterThreshold
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.14Unsigned32 (0..32000)read-createcurrent
acSysNqmSenderPacketLossThershold
OBJECT-TYPE
Maximum allowable Packet Loss, if exceeded some action is needed. Access: Online. AC INI-Param: NqmSenderTable_PacketLossThershold
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.15Unsigned32 (0..32000)read-createcurrent
acSysNqmSenderProbingConfigName
OBJECT-TYPE
Name of corresponding probe in probing table. Access: Online. AC INI-Param: NqmSenderTable_ProbingConfigName
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.16RowPointerread-createcurrent
acSysNqmSenderSourceInterfaceName
OBJECT-TYPE
Name of source interface. Access: Online. AC INI-Param: NqmSenderTable_SourceInterfaceName
1.3.6.1.4.1.5003.9.10.10.1.16.21.1.17RowPointerread-createcurrent
acSysNqmProbingTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.22not-accessiblecurrent
acSysNqmProbingEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.22.1not-accessiblecurrent
acSysNqmProbingIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: NqmProbingTable_Index
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.1Unsigned32 (0..9)not-accessiblecurrent
acSysNqmProbingRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: NqmProbingTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.2RowStatusread-createcurrent
acSysNqmProbingAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: NqmProbingTable_Action
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.3INTEGER {none(0)}read-createcurrent
acSysNqmProbingActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: NqmProbingTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysNqmProbingProbeName
OBJECT-TYPE
Probe descriptive name. Access: Online. AC INI-Param: NqmProbingTable_ProbeName
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.5SnmpAdminString (SIZE(0..64))read-createcurrent
acSysNqmProbingDuration
OBJECT-TYPE
Duration of probing session [sec]. Access: Online. AC INI-Param: NqmProbingTable_Duration
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.6Unsigned32 (20..32000)read-createcurrent
acSysNqmProbingFrequency
OBJECT-TYPE
Time interval between the start of two consecutive probing sessions [sec]. Access: Online. AC INI-Param: NqmProbingTable_Frequency
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.7Unsigned32 (0..32000)read-createcurrent
acSysNqmProbingLifeSpan
OBJECT-TYPE
Life span of this probe [sec]. Access: Online. AC INI-Param: NqmProbingTable_LifeSpan
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.8Unsigned32 (0..2000000000)read-createcurrent
acSysNqmProbingStartTime
OBJECT-TYPE
start time of this probe - now | pending | yyyy:MM:dd:HH:mm:ss. Access: Online. AC INI-Param: NqmProbingTable_StartTime
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.9SnmpAdminString (SIZE(0..64))read-createcurrent
acSysNqmProbingHistoryEntriesToKeep
OBJECT-TYPE
Number of probing result entries to keep in the history file. Access: Online. AC INI-Param: NqmProbingTable_HistoryEntriesToKeep
1.3.6.1.4.1.5003.9.10.10.1.16.22.1.10Unsigned32 (1..1000)read-createcurrent
acSysNqmResponderTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.23not-accessiblecurrent
acSysNqmResponderEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.1.16.23.1not-accessiblecurrent
acSysNqmResponderIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: NqmResponderTable_Index
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.1Unsigned32 (0..9)not-accessiblecurrent
acSysNqmResponderRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: NqmResponderTable_RowStatus
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.2RowStatusread-createcurrent
acSysNqmResponderAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: NqmResponderTable_Action
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.3INTEGER {none(0)}read-createcurrent
acSysNqmResponderActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: NqmResponderTable_ActionRes
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.4INTEGER {succeeded(0)}read-onlycurrent
acSysNqmResponderResponderName
OBJECT-TYPE
Responder descriptive name. Access: Online. AC INI-Param: NqmResponderTable_ResponderName
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.5SnmpAdminString (SIZE(0..64))read-createcurrent
acSysNqmResponderActive
OBJECT-TYPE
Responder Enable. Access: Online. AC INI-Param: NqmResponderTable_Active
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.6Unsigned32 (0..1)read-createcurrent
acSysNqmResponderLocalPort
OBJECT-TYPE
Local transport layer port number. Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970, 3980, 3990. Access: Online. AC INI-Param: NqmResponderTable_LocalPort
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.7Unsigned32 (3900..3990)read-createcurrent
acSysNqmResponderSourceInterfaceName
OBJECT-TYPE
Name of source interface. Access: Online. AC INI-Param: NqmResponderTable_SourceInterfaceName
1.3.6.1.4.1.5003.9.10.10.1.16.23.1.8RowPointerread-createcurrent
acSystemStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2
acSysType
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.1
acSysTypeProduct
OBJECT-TYPE
The type of the Board. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.1.1INTEGER {acUnknown(0), acTrunkPack-08(1), acMediaPack-108(2), acMediaPack-124(3), acTrunkPack-1600(20), acTPM1100(22), acTrunkPack-260-IpMedia(23), acTrunkPack-1610(24), acMediaPack-104(25), acMediaPack-102(26), acTrunkPack-1610-SB(29), acTrunkPack-1610-IpMedia(30), acTrunkPack-MEDIANT2000(31), acTrunkPack-STRETTO2000(32), acTrunkPack-IPMServer2000(33), acTrunkPack-2810(34), acTrunkPack-260-UN-IpMedia(35), acTrunkPack-260-IpMedia-30Ch(36), acTrunkPack-260-IpMedia-60Ch(37), acTrunkPack-260-IpMedia-120Ch(38), acTrunkPack-260RT-IpMedia-30Ch(39), acTrunkPack-260RT-IpMedia-60Ch(40), acTrunkPack-260RT-IpMedia-120Ch(41), acTrunkPack-260(42), acTrunkPack-260-UN(43), acTPM1100-PCM(44), acTrunkPack-6310(45), acTPM6300(46), acMediant1000(47), acIPMedia3000(48), acMediant3000(49), acStretto3000(50), acTrunkPack-6310-IpMedia(51), acTrunkPack-6310-SB(52), acATP-1610(53), acATP-260(54), acATP-260-UN(55), acMediaPack-118(56), acMediaPack114(57), acMediaPack112(58), acTrunkPack-6310-T3(59), acMediant3000-T3(60), acIPmedia3000-T3(61), acTrunkPack-6310-T3-IpMedia(62), acTrunkPack-8410(63), acTrunkPack-8410-IpMedia(64), acMediant-600(65), acTrunkPack-12610(66), acMediant1000-MSBG(67), acMediant-600-MSBG(68), acMediant800-MSBG(69), acMediant-4000(70), acMediant1000-ESBC(71), acMediant800-ESBC(72), acHosted(73), acMediant-850-MSBG(74), acMediant-850-ESBC(75), acMediant-500-MSBG(76), acMediant-500-ESBC(77), acMediant-2600(78), acMediant-VE-SBC(79), acMediant-VE-H-SBC(80), acMediant-SE-SBC(81), acMediant-SE-H-SBC(82), acMediant-6000-SBC(83), acMediant-500L-MSBG(84), acMediant-500L-ESBC(85)}read-onlycurrent
acSysTypeDSP
OBJECT-TYPE
Dsp Type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.1.2Unsigned32 (0..2147483647)read-onlycurrent
acSysTypeModule
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.1.3INTEGER {soloist(0), second(1), first(2)}read-onlycurrent
acSysTypeCPUSpeed
OBJECT-TYPE
CPU Speed. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.1.4Unsigned32 (0..2147483647)read-onlycurrent
acSysVersion
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.2
acSysVersionSoftware
OBJECT-TYPE
TrunkPack Software Version. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.2.1SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysVersionFlash
OBJECT-TYPE
Flash [BootLoader] Version. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.2.2Unsigned32 (0..2147483647)read-onlycurrent
acSysVersionIniFile
OBJECT-TYPE
Ini file version. AC INI-Param: INIFileVersion
1.3.6.1.4.1.5003.9.10.10.2.2.3Unsigned32 (0..2147483647)read-onlycurrent
acSysVersionSoftwareDate
OBJECT-TYPE
TrunkPack Software Date. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.2.4SnmpAdminString (SIZE(0..40))read-onlycurrent
acSysId
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.3
acSysIdName
OBJECT-TYPE
The name fo the board. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.3.1SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysIdSerialNumber
OBJECT-TYPE
serial number of board. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.3.2Unsigned32 (0..2147483647)read-onlycurrent
acSysIdSlotNumber
OBJECT-TYPE
Slot number. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.3.3Unsigned32 (0..2147483647)read-onlycurrent
acSysIdFirstSerialNumber
OBJECT-TYPE
The device's first serial number. When the device is part of a dual module board this is the first module's serial number. When the device is the first module in a dual module or the device is not in a dual module board, the values for asSysIdSerialNumber and acSysIdFirstSerialNumber are the same. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.3.4Unsigned32 (0..2147483647)read-onlycurrent
acSysCount
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.4
acSysCountDSPs
OBJECT-TYPE
DSP Count. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.4.1Unsigned32 (0..2147483647)read-onlycurrent
acSysCountChannels
OBJECT-TYPE
Channel Count. Analog or Mixed board - the returned value is the number of analog channels. Digital board - the number of digitial channels. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.4.2Unsigned32 (0..2147483647)read-onlycurrent
acSysCountTrunks
OBJECT-TYPE
Trunks Count. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.4.3Unsigned32 (0..2147483647)read-onlycurrent
acSysState
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.5
acSysStateTemperature
OBJECT-TYPE
Temperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.1Unsigned32 (0..100)read-onlycurrent
acSysStateOperational
OBJECT-TYPE
The operational state of the gateway. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.2INTEGER {disabled(1), enabled(2)}read-onlycurrent
acSysStateHAupdateInProgress
OBJECT-TYPE
Indicates during update process, which done between active and redundant boards. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.3INTEGER {updateDone(1), updateInProgress(2)}read-onlycurrent
acSysStateGWSeverity
OBJECT-TYPE
The highest alarm severity on the device. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.4INTEGER {noAlarm(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)}read-onlycurrent
acSysStateIsPstnManagementEnable
OBJECT-TYPE
Is Pstn Management Enable 0 - Disable 1 - Enable. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.5INTEGER {disable(0), enable(1)}read-onlycurrent
acSysStateErrorMessage
OBJECT-TYPE
Error Messages from the board. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.6SnmpAdminString (SIZE(0..512))read-onlycurrent
acSysStateErrorID
OBJECT-TYPE
Error Message ID. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.7Unsigned32 (0..2147483647)read-writecurrent
acSysStateDataCpuUtilization
OBJECT-TYPE
Data CPU usage in percentage. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.8Unsigned32 (0..100)read-onlycurrent
acSysStateDataMemoryUtilization
OBJECT-TYPE
Data memory usage in percentage. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.5.9Unsigned32 (0..100)read-onlycurrent
acSysNetwork
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.6
acSysEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.6.1
acSysEthernetFirstPortDuplexMode
OBJECT-TYPE
full-duplex or half-duplex connection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.1INTEGER {halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)}read-onlycurrent
acSysEthernetFirstPortSpeed
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.2INTEGER {forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)}read-onlycurrent
acSysEthernetSecondPortDuplexMode
OBJECT-TYPE
full-duplex or half-duplex connection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.3INTEGER {halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)}read-onlycurrent
acSysEthernetSecondPortSpeed
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.4INTEGER {forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)}read-onlycurrent
acSysEthernetActivePortNumber
OBJECT-TYPE
Display the current active ethernet port number. 0 - not relevant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.5Unsigned32 (0..2)read-onlycurrent
acSysEthernetPowerBudget
OBJECT-TYPE
Display the availbale power budget for the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.6Unsigned32 (0..2147483647)read-onlycurrent
acSysEthernetPowerAllocated
OBJECT-TYPE
Display the allocated power in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.7Unsigned32 (0..2147483647)read-onlycurrent
acSysEthernetPowerRemaining
OBJECT-TYPE
Display the availbale remaining power in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.8Unsigned32 (0..2147483647)read-onlycurrent
acSysEthernetStatusTable
OBJECT-TYPE
Ethernet relevant information
1.3.6.1.4.1.5003.9.10.10.2.6.1.21not-accessiblecurrent
acSysEthernetStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1not-accessiblecurrent
acSysEthernetStatusIndex
OBJECT-TYPE
The row's index. On 8410 Systems: Index 1 – related to GBE port no.1 in the TER (Media). Index 2 – related to GBE port no.2 in the TER (Media). Index 3 – related to port 1A in PEM #1 (Control). Index 4 – related to port 1B in PEM #2 (Control). Index 5 – related to port 2A in PEM #1 (OAM). Index 6 – related to port 2B in PEM #2 (OAM). On MSBG only: 1-12 LAN interfaces. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1Unsigned32 (1..12)not-accessiblecurrent
acSysEthernetStatusPortDuplexMode
OBJECT-TYPE
full-duplex or half-duplex connection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2INTEGER {halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)}read-onlycurrent
acSysEthernetStatusPortSpeed
OBJECT-TYPE
port speed. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3INTEGER {forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000), ac10Gbps(10000)}read-onlycurrent
acSysEthernetStatusActivePortNumber
OBJECT-TYPE
Status of ethernet port - active or not active. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4INTEGER {notActive(0), active(1)}read-onlycurrent
acSysEthernetStatusPortState
OBJECT-TYPE
Port State. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5INTEGER {disabled(0), blocking(1), learning(2), forwarding(3), notApplicable(10)}read-onlycurrent
acSysEthernetStatusPowerOverEthernet
OBJECT-TYPE
Power over Ethernet interface status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6INTEGER {notApplicable(0), active(1), notActive(2), poeAlarm(3)}read-onlycurrent
acSysEthernetStatusAllocatedPower
OBJECT-TYPE
Power consumed by the port. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.7SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysEthernetStatusGroup
OBJECT-TYPE
The group which the port is a member of. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.8SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysEthernetStatusPowerOverEthernetDetails
OBJECT-TYPE
Power over Ethernet interface status details. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.9SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysWanStatusTable
OBJECT-TYPE
Ethernet relevant information
1.3.6.1.4.1.5003.9.10.10.2.6.1.22not-accessiblecurrent
acSysWanStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1not-accessiblecurrent
acSysWanStatusIndex
OBJECT-TYPE
The row's index. On MSBG Only. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.1Unsigned32 (1..4)not-accessiblecurrent
acSysWanStatusPortType
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.2INTEGER {ethernet(0), t1(1), sHDSL(2), adslVdsl(3), invalidPhyType(4)}read-onlycurrent
acSysWanStatusPortDuplexMode
OBJECT-TYPE
full-duplex or half-duplex connection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.3INTEGER {halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)}read-onlycurrent
acSysWanStatusPortSpeed
OBJECT-TYPE
port speed. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.4INTEGER {forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)}read-onlycurrent
acSysWanStatusActivePortNumber
OBJECT-TYPE
Status of ethernet port - active or not active. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.5INTEGER {notActive(0), active(1)}read-onlycurrent
acSysWanStatusPortState
OBJECT-TYPE
Port State. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.6INTEGER {disabled(0), blocking(1), learning(2), forwarding(3), notApplicable(10)}read-onlycurrent
acSysWanStatusPowerOverEthernet
OBJECT-TYPE
Power over Ethernet interface status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.7INTEGER {notApplicable(0), active(1), notActive(2)}read-onlycurrent
acSysEthernetRedundantStatusTable
OBJECT-TYPE
Ethernet relevant information for redundant board (relevant for HA system). {@}Relevant only to M4K.
1.3.6.1.4.1.5003.9.10.10.2.6.1.23not-accessiblecurrent
acSysEthernetRedundantStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1not-accessiblecurrent
acSysEthernetRedundantStatusIndex
OBJECT-TYPE
The row's index. On MSBG only: 1-12 LAN interfaces. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.1Unsigned32 (1..12)not-accessiblecurrent
acSysEthernetRedundantStatusPortDuplexMode
OBJECT-TYPE
full-duplex or half-duplex connection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.2INTEGER {halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)}read-onlycurrent
acSysEthernetRedundantStatusPortSpeed
OBJECT-TYPE
port speed. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.3INTEGER {forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)}read-onlycurrent
acSysEthernetRedundantStatusActivePortNumber
OBJECT-TYPE
Status of ethernet port - active or not active. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.4INTEGER {notActive(0), active(1)}read-onlycurrent
acSysEthernetRedundantStatusPortState
OBJECT-TYPE
Port State. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.5INTEGER {disabled(0), blocking(1), learning(2), forwarding(3), notApplicable(10)}read-onlycurrent
acSysEthernetRedundantStatusPowerOverEthernet
OBJECT-TYPE
Power over Ethernet interface status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.6INTEGER {notApplicable(0), active(1), notActive(2), poeAlarm(3)}read-onlycurrent
acSysEthernetRedundantStatusAllocatedPower
OBJECT-TYPE
Power consumed by the port. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.7SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysEthernetRedundantStatusGroup
OBJECT-TYPE
The group which the port is a member of. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.8SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysEthernetRedundantStatusPowerOverEthernetDetails
OBJECT-TYPE
Power over Ethernet interface status details. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.9SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysNAT
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.6.2
acSysNATType
OBJECT-TYPE
Identified NAT type. -1 - STUN client is disabled 0 - None 1 - FullCone 2 - Restricted 3 - PortRestricted 4 - Symmetric 5 - SymmetricFireWall 6 - Blocked 7 - Unknown 10 - NAT identification in progress. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.2.1INTEGER {stunDisabled(-1), none(0), fullCone(1), restricted(2), portRestricted(3), symmetric(4), symmetricFireWall(5), blocked(6), unknown(7), natIdentificationInProgress(10)}read-onlycurrent
acSysWebStat
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.6.3
acSysWebStatPasswordControlViaSNMP
OBJECT-TYPE
If set to 1 it will allow changing the web interface username and password via SNMP. AC INI-Param: WEBPasswordControlViaSNMP
1.3.6.1.4.1.5003.9.10.10.2.6.3.1INTEGER {disabled(0), enabled(1)}read-onlycurrent
acSysIPStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.6.4
acSysInterfaceStatusTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.4.21not-accessiblecurrent
acSysInterfaceStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1not-accessiblecurrent
acSysInterfaceStatusEntryIndex
OBJECT-TYPE
Related Interface index in the interface configuration table (in case the table is empty - meaning there is only single IP the index will appear with 0). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1Unsigned32 (0..31)not-accessiblecurrent
acSysInterfaceStatusTypeIndex
OBJECT-TYPE
1 - IP Address. 2 - IPv6 Link-Local Address. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2Unsigned32 (1..2)not-accessiblecurrent
acSysInterfaceStatusApplicationTypes
OBJECT-TYPE
The type assigned to the interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3INTEGER {oam(0), media(1), control(2), oamAndMedia(3), oamAndControl(4), mediaAndControl(5), oamAndMediaAndControl(6), data(11), maintenance(99)}read-onlycurrent
acSysInterfaceStatusMode
OBJECT-TYPE
Interface configuration mode. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4INTEGER {iPv6PrefixManual(3), iPv6Manual(4), iPv4Manual(10)}read-onlycurrent
acSysInterfaceStatusIPAddress
OBJECT-TYPE
IP Address (can be either IPv4 or IPv6) for this interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5SnmpAdminString (SIZE(0..45))read-onlycurrent
acSysInterfaceStatusPrefixLength
OBJECT-TYPE
The number of ‘1’ bits in this interface’s netmask. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6Unsigned32 (0..128)read-onlycurrent
acSysInterfaceStatusGateway
OBJECT-TYPE
Default Gateway. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7SnmpAdminString (SIZE(0..45))read-onlycurrent
acSysInterfaceStatusVlanID
OBJECT-TYPE
VLAN ID of this interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8Unsigned32 (0..4094)read-onlycurrent
acSysInterfaceStatusName
OBJECT-TYPE
16 character string of this interface’s name. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9SnmpAdminString (SIZE(0..15))read-onlycurrent
acSysDataInterfaceStatusTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.4.22not-accessiblecurrent
acSysDataInterfaceStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1not-accessiblecurrent
acSysDataInterfaceStatusIndex
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.1Unsigned32 (0..69)not-accessiblecurrent
acSysDataInterfaceStatusName
OBJECT-TYPE
Interface name. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.2SnmpAdminString (SIZE(0..70))read-onlycurrent
acSysDataInterfaceStatusIPAddress
OBJECT-TYPE
IPv4 Address for this interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.3SnmpAdminString (SIZE(0..45))read-onlycurrent
acSysDataInterfaceStatusNetmask
OBJECT-TYPE
Netmask for this interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.4SnmpAdminString (SIZE(0..45))read-onlycurrent
acSysDataInterfaceStatusInfo
OBJECT-TYPE
Status of interface can be one of the following: Unknown, Disabled, Enabled, Connected or Disconnected. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.5SnmpAdminString (SIZE(0..30))read-onlycurrent
acSysDataInterfaceStatusDescription
OBJECT-TYPE
Description of the interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.6SnmpAdminString (SIZE(0..30))read-onlycurrent
acSysDataInterfaceStatusOperationalState
OBJECT-TYPE
Protocol is UP or Down. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.7INTEGER {down(0), up(1)}read-onlycurrent
acSysDataInterfaceStatusStateTime
OBJECT-TYPE
Time elapsed since the interface entered its current state (HH:MM:SS). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.8SnmpAdminString (SIZE(0..9))read-onlycurrent
acSysDataInterfaceStatusUptime
OBJECT-TYPE
Time since the interface was created (HH:MM:SS). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.9SnmpAdminString (SIZE(0..9))read-onlycurrent
acSysDataInterfaceStatusMtuMode
OBJECT-TYPE
the Maximum Transmission Unit (MTU) on the specified interface. Can be: automatically, DHCP or value (in bytes). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.10SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysDataInterfaceStatusDnsStatus
OBJECT-TYPE
DNS servers information for this interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.11SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysDataInterfaceStatusRxPackets
OBJECT-TYPE
Total packets received. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.12Counter32read-onlycurrent
acSysDataInterfaceStatusRxBytes
OBJECT-TYPE
Total bytes received. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.13Counter32read-onlycurrent
acSysDataInterfaceStatusRxDropped
OBJECT-TYPE
No space in receive buffers available. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.14Counter32read-onlycurrent
acSysDataInterfaceStatusRxErrors
OBJECT-TYPE
Bad packets received. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.15Counter32read-onlycurrent
acSysDataInterfaceStatusTxPackets
OBJECT-TYPE
Total packets transmitted. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.16Counter32read-onlycurrent
acSysDataInterfaceStatusTxBytes
OBJECT-TYPE
Total bytes transmitted. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.17Counter32read-onlycurrent
acSysDataInterfaceStatusTxDropped
OBJECT-TYPE
No space in transmit buffers available. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.18Counter32read-onlycurrent
acSysDataInterfaceStatusTxErrors
OBJECT-TYPE
Packet transmit problems. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.19Counter32read-onlycurrent
acSysDataInterfaceStatusMinutes
OBJECT-TYPE
This value determines time interval in minutes, on which the rate sampling is done. The value is relevant to the columns MinuteInputRate and MinuteOutputRate. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.20Unsigned32 (0..2147483647)read-onlycurrent
acSysDataInterfaceStatusMinuteInputRate
OBJECT-TYPE
The average received bits rate (bps) and packets rate (pps) during the last ‘acSysDataInterfaceStatusMinutes’ minutes. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.21SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysDataInterfaceStatusMinuteOutputRate
OBJECT-TYPE
The average transmitted bits rate (bps) and packets rate (pps) during the last ‘acSysDataInterfaceStatusMinutes’ minutes. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.22SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysDataInterfaceStatusSeconds
OBJECT-TYPE
This value determines time interval in seconds on which the rate sampling is done. The value is relevant to the columns SecondInputRate and SecondOutputRate. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.23Unsigned32 (0..2147483647)read-onlycurrent
acSysDataInterfaceStatusSecondInputRate
OBJECT-TYPE
The average received bits rate (bps) and packets rate (pps) during the last ‘acSysDataInterfaceStatusSeconds’ seconds. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.24SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysDataInterfaceStatusSecondOutputRate
OBJECT-TYPE
The average transmitted bits rate (bps) and packets rate (pps) during the last ‘acSysDataInterfaceStatusSeconds’ seconds. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.25SnmpAdminString (SIZE(0..100))read-onlycurrent
acSysTime
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.7
acSysTimeUp
OBJECT-TYPE
Time (in Seconds) that the board is alive. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.7.1Unsigned32 (0..2147483647)read-onlycurrent
acSysVoicePrompt
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.8
acSysVoicePromptTotalMemorySize
OBJECT-TYPE
Get the total voice prompt memory size. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.8.1Unsigned32 (0..2147483647)read-onlycurrent
acSysVoicePromptMaxFreeMemorySize
OBJECT-TYPE
Get the maximu voice prompt memory free size. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.8.2Unsigned32 (0..2147483647)read-onlycurrent
acSysRepositoryAMS
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.9
acSysRepositoryAMSIsReadyForUpdate
OBJECT-TYPE
Verify if the old repository is free or there are signals still using it. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.9.1INTEGER {false(0), true(1)}read-onlycurrent
acSysHAStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.10
acSysHAStatusReady
OBJECT-TYPE
Defines whether the M3K system supports HA or not. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.10.1INTEGER {notApplicable(1), yes(2), no(3)}read-onlycurrent
acSysHAStatusNetworkWatchdogStatus
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.10.2SnmpAdminString (SIZE(0..400))read-onlycurrent
acSysLDAPStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.11
acSysLDAPStatusServerMode
OBJECT-TYPE
LDAP server status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.11.1INTEGER {notApplicable(0), connectionBroken(1), connecting(2), connected(3)}read-onlycurrent
acSysNqmStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.12
acSysNqmHistoryTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.12.1not-accessiblecurrent
acSysNqmHistoryEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.2.12.1.1not-accessiblecurrent
acSysNqmHistorySenderIndex
OBJECT-TYPE
Index of Sender from acSysNqmSenderTable. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.1Unsigned32 (0..9)not-accessiblecurrent
acSysNqmHistoryIndex
OBJECT-TYPE
Internal index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.2Unsigned32not-accessiblecurrent
acSysNqmHistoryProbeTime
OBJECT-TYPE
NULL terminated. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.3SnmpAdminString (SIZE(0..32))read-onlycurrent
acSysNqmHistoryIsValid
OBJECT-TYPE
Null terminated Yes/No or textual reason. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.4SnmpAdminString (SIZE(0..16))read-onlycurrent
acSysNqmHistoryRoundTripTime
OBJECT-TYPE
round trip time [msec]. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.5Unsigned32 (0..99999)read-onlycurrent
acSysNqmHistoryPacketLossTx
OBJECT-TYPE
outging packet loss. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.6Unsigned32 (0..999999)read-onlycurrent
acSysNqmHistoryPacketLossRx
OBJECT-TYPE
incoming packet loss. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.7Unsigned32 (0..999999)read-onlycurrent
acSysNqmHistoryTotalPacketLoss
OBJECT-TYPE
sum of Rx and Tx packet loss. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.8Unsigned32 (0..9999999)read-onlycurrent
acSysNqmHistoryJitterTx
OBJECT-TYPE
outgoing jitter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.9Unsigned32 (0..999999)read-onlycurrent
acSysNqmHistoryJitterRx
OBJECT-TYPE
incoming jitter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.10Unsigned32 (0..999999)read-onlycurrent
acSysNqmHistoryTotalJitter
OBJECT-TYPE
round trip jitter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.11Unsigned32 (0..9999999)read-onlycurrent
acSysNqmHistoryCqMos
OBJECT-TYPE
Conversation quality MOS. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.12Unsigned32 (0..99999)read-onlycurrent
acSysNqmHistoryLqMos
OBJECT-TYPE
Listener quality MOS. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.12.1.1.13Unsigned32 (0..99999)read-onlycurrent
acSysDataStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.2.13
acSysDataStatusFirewallTCPConnections
OBJECT-TYPE
The number of TCP firewall connections. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.13.1Unsigned32read-onlycurrent
acSysDataStatusFirewallUDPConnections
OBJECT-TYPE
The number of UDP firewall connections. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.13.2Unsigned32read-onlycurrent
acSysDataStatusFirewallICMPConnections
OBJECT-TYPE
The number of ICMP firewall connections. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.2.13.3Unsigned32read-onlycurrent
acSystemAction
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.3
acSysAction
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.3.1
acSysActionSet
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.3.1.1
acSysActionSetReset
OBJECT-TYPE
remote Reset. To remote reset the board, set the value of this object to 1. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.1Unsigned32 (0..1)read-writecurrent
acSysActionSetResetControl
OBJECT-TYPE
Determines the remote reset action. 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload. Access: Instant. AC INI-Param: RemoteResetControl
1.3.6.1.4.1.5003.9.10.10.3.1.1.2INTEGER {resetFromFlashAfterBurn(1), resetFromFlashNoBurn(2), resetFromBootP(3)}read-writecurrent
acSysActionSetDefaults
OBJECT-TYPE
To set the board to default values, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.3Unsigned32 (0..1)read-writecurrent
acSysActionSetSaveConfig
OBJECT-TYPE
To save all current configuration in the board onto the flash, set the value of this object to 1. NOTE: Do NOT save the configuration while voice is running - this will cause a delay. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.4Unsigned32 (0..1)read-writecurrent
acSysActionSetAutoUpdate
OBJECT-TYPE
To update the system configuration according to the provisioned IniFileUrl, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.5Unsigned32 (0..1)read-writecurrent
acSysActionSetGetTimeFromNTPServer
OBJECT-TYPE
Initiates an immediate NTP time fetch. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.6Unsigned32 (0..1)read-writecurrent
acSysActionSetSwUpgrade
OBJECT-TYPE
Defines the type of SW upgrade in M3K HA system: Hitless upgrade only or system reset upgrade if hitless is not supported. This parameter can be set by ini file and snmp. Access: Instant. AC INI-Param: M3KHASwUpgradeMode
1.3.6.1.4.1.5003.9.10.10.3.1.1.7INTEGER {hitLessUpGrade(1), systemResetUpGrade(2)}read-writecurrent
acSysActionSetOnLineChangesApply
OBJECT-TYPE
Applies the board on line changed params. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.8INTEGER {defaultValue(0), applyChanges(1)}read-writecurrent
acSysActionSetIPSecTLSUpgrade
OBJECT-TYPE
To update the IPSec TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.9INTEGER {defaultValue(0), upDateChanges(1)}read-writecurrent
acSysActionSetGWAppTLSUpgrade
OBJECT-TYPE
To update the GWApp TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.10INTEGER {defaultValue(0), upDateChanges(1)}read-writecurrent
acSysActionSetConvertNetworkIFsConfiguration
OBJECT-TYPE
SET to 1 will convert network configuration to advance multiple network Interfaces mode. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.11INTEGER {defaultValue(0), convertAction(1)}read-writecurrent
acSysActionSetActionId
OBJECT-TYPE
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.12Unsigned32 (0..2147483647)read-writecurrent
acSysActionSetAutoUpdateActionResult
OBJECT-TYPE
Indicates the autoupdates operation status in the form of a string: 'acSysActionId ; <status> ; <reson>'. The status field can be: 'success'\'failure'\'inProgress'. The infromation is valid only when downloading one file at a time. Note - a second way of following the success of the file downloading is to see the files name being updated in the acSysFile subtree. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.1.13SnmpAdminString (SIZE(0..200))read-onlycurrent
acSysActionSetApplyINImethod
OBJECT-TYPE
INI parsing method. 0 = Apply After Reset 1 = Apply Immediate When downloading a new INI to the gateway this parameter determine if a parsing will be done immediately or after a reboot. Note that the default is immediately parsing. Access: Instant. AC INI-Param: ApplyINImethod
1.3.6.1.4.1.5003.9.10.10.3.1.1.14INTEGER {applyAfterReset(0), applyImmediate(1)}read-writecurrent
acSysActionAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.3.1.2
acSysActionAdminState
OBJECT-TYPE
Determines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl. 1 - shuttingDown: (read only) Graceful Shutdown is being carried out. 2 - unlocked: GW is in service. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.2.1INTEGER {locked(0), shuttingDown(1), unlocked(2)}read-writecurrent
acSysActionAdminStateLockTimeout
OBJECT-TYPE
Defines the time remaining (in seconds) for the shutdown to complete. 0 = immediate shutdown -1 = waits until all calls drop (infinite) >0 = the number of seconds to wait. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.2.2Integer32 (-1..32768)read-writecurrent
acSysUpload
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.3.1.3
acSysUploadActionType
OBJECT-TYPE
Action to be carried out. Setting this field triggers the action. File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17) only access is instant. File removal supported for all other then iniFile(1), casFile(7), v5PortFile(16) and DataConfigurationFile(17), (v5PortFile removal is done via acV5PortActionType) access is offline. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.1INTEGER {none(0), upload(1), remove(2), actionDone(10)}read-writecurrent
acSysUploadFileType
OBJECT-TYPE
The file type to be uploaded. Note - for file types with more then one instance (like CAS files) use the acSysActionFileInstance to specify which instance you want to upload. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.2INTEGER {iniFile(1), cptFile(2), vpFile(3), prerecordedTonesFile(4), fxsCoeffFile(5), fxoCoeffFile(6), casFile(7), xmlFile(8), externalCoderFile(9), userInfoFile(10), dialPlanFile(11), tlsPKeyFile(12), tlsCertFile(13), tlsRootFile(14), videoFontFile(15), v5PortFile(16), dataConfigurationFile(17), amdSensitivityFile(18)}read-writecurrent
acSysUploadFileNumber
OBJECT-TYPE
File number for file types that have more then one file instance, such as CAS, VideoFont etc'. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.3Integer32 (-1..7)read-writecurrent
acSysUploadFileURI
OBJECT-TYPE
URI indicating file location to be downloaded to. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.4SnmpAdminString (SIZE(0..254))read-writecurrent
acSysUploadActionID
OBJECT-TYPE
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.5Unsigned32 (0..2147483647)read-writecurrent
acSysUploadActionResult
OBJECT-TYPE
Action result. Includes action status (success, failure or inProgress), action ID. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.3.1.3.6SnmpAdminString (SIZE(0..40))read-onlycurrent
acSystemChassis
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.4
acSystemChassisDryContactsOutStatus
OBJECT-TYPE
Indicates current state of the alarm dry contacts – out signals (3 signals). This is a bit-map of possible conditions. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.1Bits {noAlarm(0), criticalAlarm(1), majorAlarm(2), minorAlarm(3)}read-onlycurrent
acSystemChassisDryContactsInStatus
OBJECT-TYPE
Indicates current state of the alarm dry contacts - in signals (1 signals). The role of each input signal should be according to the customer's requirements. This is a bit-map of possible conditions. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.2Bits {noAlarm(0), alarm1(1)}read-onlycurrent
acSystemChassisLastChanged
OBJECT-TYPE
The value of sysUpTime at the time a row is modified in any of the acSystemChassis subtree's objects. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.3Unsigned32 (0..4294967295)read-onlycurrent
acSysModuleTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.21not-accessiblecurrent
acSysModuleEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.21.1not-accessiblecurrent
acSysModuleIndex
OBJECT-TYPE
The Module number in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysModuleGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. 1 being the bottom slot and so on. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.2Unsigned32 (1..12)read-onlycurrent
acSysModuleType
OBJECT-TYPE
The module's type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.3INTEGER {acUnknown(0), acTrunkPack-08(1), acMediaPack-108(2), acMediaPack-124(3), acTrunkPack-1600(20), acTPM1100(22), acTrunkPack-260-IpMedia(23), acTrunkPack-1610(24), acMediaPack-104(25), acMediaPack-102(26), acTrunkPack-1610-SB(29), acTrunkPack-1610-IpMedia(30), acTrunkPack-MEDIANT2000(31), acTrunkPack-STRETTO2000(32), acTrunkPack-IPMServer2000(33), acTrunkPack-2810(34), acTrunkPack-260-UN-IpMedia(35), acTrunkPack-260-IpMedia-30Ch(36), acTrunkPack-260-IpMedia-60Ch(37), acTrunkPack-260-IpMedia-120Ch(38), acTrunkPack-260RT-IpMedia-30Ch(39), acTrunkPack-260RT-IpMedia-60Ch(40), acTrunkPack-260RT-IpMedia-120Ch(41), acTrunkPack-260(42), acTrunkPack-260-UN(43), acTPM1100-PCM(44), acTrunkPack-6310(45), acTPM6300(46), acMediant1000(47), acIPMedia3000(48), acMediant3000(49), acStretto3000(50), acTrunkPack-6310-IpMedia(51), acTrunkPack-6310-SB(52), acATP-1610(53), acATP-260(54), acATP-260-UN(55), acMediaPack-118(56), acMediaPack114(57), acMediaPack112(58), acTrunkPack-6310-T3(59), acMediant3000-T3(60), acIPmedia3000-T3(61), acTrunkPack-6310-T3-IpMedia(62), acTrunkPack-8410(63), acTrunkPack-8410-IpMedia(64), acMediant-800-MSBG(69), acMediant-500-MSBR(76), acMediant-500-ESBC(77), acMediant-500L-MSBR(84), acMediant-500L-ESBC(85), sA1(250), sA2(251), sA3(252), acMediant1000CPUmodule(253), acMediant1000IFDigitalModule(254), acMediant1000IFAnalogModule(255), acMediant1000IFBRIModule(256), acMediant1000IPMediaModule(257), acMediant600CPUmodule(258), acMediant600IFDigitalModule(259), acMediant600IFAnalogModule(260), acMediant600IFBRIModule(261), acMediant600IPMediaModule(262), acMediant800CPUmodule(265), acMediant800IFDigitalModule(266), acMediant800IFAnalogModule(267), acMediant800IFBRIModule(268), acMediant800IFWANModule(269), acMediant800IFWiFiModule(270), acMediant800IPMediaModule(271), acMediant800EthernetModule(272), acMediant800IFT1WANModule(273), acMediant800IFSHDSLModule(274), acMediant800IFADSLModule(275), acMediant1000IFWANModule(276), acMediant1000IFT1WANModule(277), acMediant1000IFSHDSLModule(278), acMediant1000IFADSLModule(279), acMediant4000CPUmodule(280), acMediant1000EthernetModule(281), acSWESBCModule(282), acMediant500CPUmodule(283), acMediant500IFDigitalModule(284), acMediant500IFAnalogModule(285), acMediant500IFBRIModule(286), acMediant500IFWANModule(287), acMediant500IFWiFiModule(288), acMediant500IPMediaModule(289), acMediant500EthernetModule(290), acMediant500IFT1WANModule(291), acMediant500IFSHDSLModule(292), acMediant500IFADSLModule(293), acMediant500IFGESFPModule(294), acMediant4000MPModule(295), acMediant-850-MSBG(296), acMediant850CPUmodule(297), acMediant850IFDigitalModule(298), acMediant850IFAnalogModule(299), acMediant850IFBRIModule(300), acMediant850IFWANModule(301), acMediant850IFWiFiModule(302), acMediant850IPMediaModule(303), acMediant850EthernetModule(304), acMediant850IFT1WANModule(305), acMediant850IFSHDSLModule(306), acMediant850IFADSLModule(307), acMediant2600CPUmodule(308), acMediant2600MPModule(309)}read-onlycurrent
acSysModulePresence
OBJECT-TYPE
Is the module present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.4INTEGER {present(1), missing(2)}read-onlycurrent
acSysModuleLicenseKeyList
OBJECT-TYPE
List of active features as enabled by the license key. SA modules return NULL. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.5SnmpAdminString (SIZE(0..1400))read-onlycurrent
acSysModuleSerialNumber
OBJECT-TYPE
The module's serial number. For 6310 the serial number is the decimal form of the last 5 characters in the MAC Address. SA modules return 0. When the modules in the table are unavailable for audit (no HA) (-1) is returned. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.6Integer32 (-1..2147483647)read-onlycurrent
acSysModuleSWVersion
OBJECT-TYPE
The version of the SW being run in the module placed . SA Modules return NULL. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.7SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysModuleOperationalState
OBJECT-TYPE
The operational state of the module. Determined internally by the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.8INTEGER {disable(1), enable(2)}read-onlycurrent
acSysModuleHAStatus
OBJECT-TYPE
Modules status with in the system. Designed to define the HA state. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.9INTEGER {acitveNonHA(1), active(2), redundant(3), standAlone(4), redundantNonHA(5), notApplicable(6)}read-onlycurrent
acSysModuleLEDs
OBJECT-TYPE
Bit Field for the LEDs on the front of the module. LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. 3 MSB are the color - 0 - none 1- Green 2 - Red 3 - Yellow 4 - Orange 5 - Blue 7 - Gray (unknown). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.10OCTET STRING (SIZE(0..50))read-onlycurrent
acSysModuleTemperature
OBJECT-TYPE
Temperature of the board in degrees Celsius. SA Modules return 0. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.11Integer32 (-1..100)read-onlycurrent
acSysModuleActions
OBJECT-TYPE
Actions to be performed by the module. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.12INTEGER {reset(1), switchOver(2), actionDone(3)}read-writecurrent
acSysModuleFRUaction
OBJECT-TYPE
Field Replace Unit actions Relevant to IF-Module only. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.13INTEGER {fruActionDone(1), fruOutOfServiceAction(2), fruBackToServiceAction(3), fruNotApplicable(4)}read-writecurrent
acSysModuleFRUstatus
OBJECT-TYPE
Field Replace Unit module's status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.14INTEGER {moduleNotExist(1), moduleExistOk(2), moduleOutOfService(3), moduleBackToServiceStart(4), moduleMismatch(5), moduleFaulty(6), notApplicable(7)}read-onlycurrent
acSysModuleNumOfPorts
OBJECT-TYPE
The number of physical interfaces in a module, analog or digital. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.15Unsigned32 (1..4)read-onlycurrent
acSysModuleFirstPortNum
OBJECT-TYPE
The logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.21.1.16Unsigned32 (0..19)read-onlycurrent
acSysFanTrayTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.22not-accessiblecurrent
acSysFanTrayEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.22.1not-accessiblecurrent
acSysFanTrayIndex
OBJECT-TYPE
Fan-Tray's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysFanTrayGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.2Unsigned32 (1)read-onlycurrent
acSysFanTrayExistence
OBJECT-TYPE
Is the Fan-Tray present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.3INTEGER {present(1), missing(2)}read-onlycurrent
acSysFanTrayType
OBJECT-TYPE
The type of the Fan-Tray . AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.4SnmpAdminString (SIZE(0..50))read-onlycurrent
acSysFanTrayLEDs
OBJECT-TYPE
This object built as a bit-field which represents the Fan-Tray's LEDs status. The first four bites represent the System's LED status and the last four bites represent the Shelf-LED’s status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.5OCTET STRING (SIZE(0..20))read-onlycurrent
acSysFanTraySeverity
OBJECT-TYPE
The Severity of the whole fan tray according to the current active alarm in the alarm table: Critical, Major or cleared. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.6INTEGER {cleared(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)}read-onlycurrent
acSysFanTrayFansConfiguredSpeed
OBJECT-TYPE
The fan's configured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.7OCTET STRING (SIZE(0..8))read-onlycurrent
acSysFanTrayFansCurrentSpeed
OBJECT-TYPE
The fan's mesured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.8OCTET STRING (SIZE(0..8))read-onlycurrent
acSysFanTrayFansStatus
OBJECT-TYPE
A bit field which display the working status of each fan in the Fan-Tray. 0 - Working 1 - Faulty. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.22.1.9OCTET STRING (SIZE(0..1))read-onlycurrent
acSysPowerSupplyTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.23not-accessiblecurrent
acSysPowerSupplyEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.23.1not-accessiblecurrent
acSysPowerSupplyIndex
OBJECT-TYPE
Power-Supply's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysPowerSupplyGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.2Unsigned32 (1..2)read-onlycurrent
acSysPowerSupplyExistence
OBJECT-TYPE
Is the Power-Supply present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.3INTEGER {present(1), missing(2)}read-onlycurrent
acSysPowerSupplyHwversion
OBJECT-TYPE
PS’s HW version. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.4SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysPowerSupplyLEDs
OBJECT-TYPE
A bit-field representation of the Power-Supply LEDs' status. The first four bites represent the Power-Supply LED's status and the last four bites represent the Fault LED's status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.5OCTET STRING (SIZE(0..20))read-onlycurrent
acSysPowerSupplySeverity
OBJECT-TYPE
The Severity of the power-supply according to the current active alarm in the alarm table. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.23.1.6INTEGER {cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)}read-onlycurrent
acSysPEMTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.24not-accessiblecurrent
acSysPEMEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.24.1not-accessiblecurrent
acSysPEMIndex
OBJECT-TYPE
PEM-Module's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.24.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysPEMGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.24.1.2Unsigned32 (1..2)read-onlycurrent
acSysPEMExistence
OBJECT-TYPE
Is the PEM-Module present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.24.1.3INTEGER {present(1), missing(2)}read-onlycurrent
acSysPEMType
OBJECT-TYPE
PEM’s Type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.24.1.4SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysPEMElectricWireConnection
OBJECT-TYPE
Present the status of the electricity connector located on the PEM card. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.24.1.5INTEGER {connected(1), disconnected(2)}read-onlycurrent
acSysSATModule
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.4.25
acSysSATTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.25.21not-accessiblecurrent
acSysSATEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.25.21.1not-accessiblecurrent
acSysSATSatIndex
OBJECT-TYPE
SAT-Module's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1Unsigned32 (1..2)not-accessiblecurrent
acSysSATGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2Unsigned32 (2..4)read-onlycurrent
acSysSATType
OBJECT-TYPE
SAT’s Type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysSATInitInformation
OBJECT-TYPE
Sat's Init Information. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4INTEGER {detected(0), reConfig(1), reConfigTry2(2), reConfigTry3(3), notInitialized(4), initIsMissing(5), initWasReset(6), initFail(7), initInProgress(8), initUpdateREFTable(9), remoteKeepAlive(10), initComplete(11)}read-onlycurrent
acSysSATTimingUnitExistence
OBJECT-TYPE
Is the Timig Unit present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5INTEGER {exist(1), notExist(2)}read-onlycurrent
acSysSATTimingRefSelection
OBJECT-TYPE
SAT's Timing Reference Selection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6INTEGER {bITSNOREF(0), rEFFromBITSA(1), rEFFromBITSB(2), bITSNOREF1(3), rEFFromLineClock1(4), rEFFromLineClock2(5), rEFFromLineClock3(6), rEFFromLineClock7(7)}read-onlycurrent
acSysSATFramersTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.25.22not-accessiblecurrent
acSysSATFramersEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.25.22.1not-accessiblecurrent
acSysSATFramersSatIndex
OBJECT-TYPE
SAT-Module's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1Unsigned32 (1..2)not-accessiblecurrent
acSysSATFramersFramerIndex
OBJECT-TYPE
Framer's Index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2Unsigned32 (1..2)not-accessiblecurrent
acSysSATFramersFramerInterfaceStatus
OBJECT-TYPE
Framer Interface Status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3INTEGER {framerInitialized(0), framerNotInitialized(1)}read-onlycurrent
acSysSATFramersFramerLoopBackRef
OBJECT-TYPE
Frame rLoop Back Reference. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4INTEGER {loopdisable(0), loopenable(1)}read-onlycurrent
acSysSATFramersFramerInterfaceType
OBJECT-TYPE
Framer Interface Type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5INTEGER {e1CRC4(0), e1CAS(1), e1FAS(2), t1D4(3), t1ESF(4), t12(5)}read-onlycurrent
acSysSATFramersFramerTransmitControl
OBJECT-TYPE
Framer Transmit Control. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6INTEGER {systemClock(0), aIS(1), disableTransmit(2)}read-onlycurrent
acSysSATFramersRxStatus
OBJECT-TYPE
Provides the alarm status of the clock interface. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7INTEGER {alarmClear(0), lOFAlarm(1), lOSAlarm(2), aISAlarm(3), aISInit(4)}read-onlycurrent
acSysSATFramersIsUsedAsPLLClock
OBJECT-TYPE
Is Used As PLL Clock indication. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8INTEGER {notUsed(0), used(1)}read-onlycurrent
acSysTimingModule
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.4.26
acSysPLLStatusTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.26.21not-accessiblecurrent
acSysPLLStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.26.21.1not-accessiblecurrent
acSysPLLStatusIndex
OBJECT-TYPE
Table's Index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1Unsigned32 (0..1)not-accessiblecurrent
acSysPLLStatusOperatingMode
OBJECT-TYPE
PLL's Current Operating Mode. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2INTEGER {freeRun(0), lockToRef1(1), lockToRef2(2), lockToLocal(3), holdOver(4)}read-onlycurrent
acSystemChassisHA
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.10.4.27
acSystemChassisHADevice1Name
OBJECT-TYPE
Define the unit identification name of the first unit of HA system. Relevant to M4K and SW-SBC. Access: Instant. AC INI-Param: HAUnitIdName
1.3.6.1.4.1.5003.9.10.10.4.27.1SnmpAdminString (SIZE(0..128))read-writecurrent
acSystemChassisHADevice2Name
OBJECT-TYPE
Define the unit identification name of the second unit of HA system. Relevant to M4K and SW-SBC. Access: Instant. AC INI-Param: HAUnitIdName
1.3.6.1.4.1.5003.9.10.10.4.27.2SnmpAdminString (SIZE(0..128))read-writecurrent
acSystemChassisHAActiveDevice
OBJECT-TYPE
Specifies the active device. Relevant to M4K and SW-SBC. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.3INTEGER {notApplicable(0), device1(1), device2(2), standAlone(3)}read-onlycurrent
acSysRedundantModuleTable
OBJECT-TYPE
Relevant only to M4K.
1.3.6.1.4.1.5003.9.10.10.4.27.21not-accessiblecurrent
acSysRedundantModuleEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.27.21.1not-accessiblecurrent
acSysRedundantModuleIndex
OBJECT-TYPE
The Module number in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysRedundantModuleGeographicalPosition
OBJECT-TYPE
The CPU slot number of the redundant board. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.2Unsigned32 (1..12)read-onlycurrent
acSysRedundantModuleType
OBJECT-TYPE
The module's type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.3INTEGER {acUnknown(0), acMediant4000CPUmodule(280), acMediant4000MPModule(295), acMediant2600CPUmodule(308), acMediant2600MPModule(309)}read-onlycurrent
acSysRedundantModulePresence
OBJECT-TYPE
Is the module present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.4INTEGER {present(1), missing(2)}read-onlycurrent
acSysRedundantModuleLicenseKeyList
OBJECT-TYPE
List of active features as enabled by the license key. SA modules return NULL. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.5SnmpAdminString (SIZE(0..1400))read-onlycurrent
acSysRedundantModuleSerialNumber
OBJECT-TYPE
The module's serial number. For 6310 the serial number is the decimal form of the last 5 characters in the MAC Address. SA modules return 0. When the modules in the table are unavailable for audit (no HA) (-1) is returned. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.6Integer32 (-1..2147483647)read-onlycurrent
acSysRedundantModuleSWVersion
OBJECT-TYPE
The version of the SW being run in the module placed . SA Modules return NULL. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.7SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysRedundantModuleOperationalState
OBJECT-TYPE
The operational state of the module. Determined internally by the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.8INTEGER {disable(1), enable(2)}read-onlycurrent
acSysRedundantModuleHAStatus
OBJECT-TYPE
Modules status with in the system. Designed to define the HA state. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.9INTEGER {acitveNonHA(1), active(2), redundant(3), standAlone(4), redundantNonHA(5), notApplicable(6)}read-onlycurrent
acSysRedundantModuleLEDs
OBJECT-TYPE
Bit Field for the LEDs on the front of the module. LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. 3 MSB are the color - 0 - none 1- Green 2 - Red 3 - Yellow 4 - Orange 5 - Blue 7 - Gray (unknown). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.10OCTET STRING (SIZE(0..50))read-onlycurrent
acSysRedundantModuleTemperature
OBJECT-TYPE
Temperature of the board in degrees Celsius. SA Modules return 0. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.11Integer32 (-1..100)read-onlycurrent
acSysRedundantModuleActions
OBJECT-TYPE
Actions to be performed by the module. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.12INTEGER {reset(1), actionDone(3)}read-writecurrent
acSysRedundantModuleFRUaction
OBJECT-TYPE
Field Replace Unit actions Relevant to IF-Module only. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.13INTEGER {fruActionDone(1), fruOutOfServiceAction(2), fruBackToServiceAction(3), fruNotApplicable(4)}read-writecurrent
acSysRedundantModuleFRUstatus
OBJECT-TYPE
Field Replace Unit module's status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.14INTEGER {moduleNotExist(1), moduleExistOk(2), moduleOutOfService(3), moduleBackToServiceStart(4), moduleMismatch(5), moduleFaulty(6), notApplicable(7)}read-onlycurrent
acSysRedundantModuleNumOfPorts
OBJECT-TYPE
The number of physical interfaces in a module, analog or digital. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.15Unsigned32 (1..4)read-onlycurrent
acSysRedundantModuleFirstPortNum
OBJECT-TYPE
The logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.21.1.16Unsigned32 (0..19)read-onlycurrent
acSysRedundantFanTrayTable
OBJECT-TYPE
Relevant only to M4K.
1.3.6.1.4.1.5003.9.10.10.4.27.22not-accessiblecurrent
acSysRedundantFanTrayEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.27.22.1not-accessiblecurrent
acSysRedundantFanTrayIndex
OBJECT-TYPE
Fan-Tray's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysRedundantFanTrayGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.2Unsigned32 (1)read-onlycurrent
acSysRedundantFanTrayExistence
OBJECT-TYPE
Is the Fan-Tray present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.3INTEGER {present(1), missing(2)}read-onlycurrent
acSysRedundantFanTrayType
OBJECT-TYPE
The type of the Fan-Tray . AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.4SnmpAdminString (SIZE(0..50))read-onlycurrent
acSysRedundantFanTrayLEDs
OBJECT-TYPE
This object built as a bit-field which represents the Fan-Tray's LEDs status. The first four bites represent the System's LED status and the last four bites represent the Shelf-LED’s status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.5OCTET STRING (SIZE(0..20))read-onlycurrent
acSysRedundantFanTraySeverity
OBJECT-TYPE
The Severity of the whole fan tray according to the current active alarm in the alarm table: Critical, Major or cleared. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.6INTEGER {cleared(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)}read-onlycurrent
acSysRedundantFanTrayFansConfiguredSpeed
OBJECT-TYPE
The fan's configured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.7OCTET STRING (SIZE(0..8))read-onlycurrent
acSysRedundantFanTrayFansCurrentSpeed
OBJECT-TYPE
The fan's mesured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.8OCTET STRING (SIZE(0..8))read-onlycurrent
acSysRedundantFanTrayFansStatus
OBJECT-TYPE
A bit field which display the working status of each fan in the Fan-Tray. 0 - Working 1 - Faulty. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.22.1.9OCTET STRING (SIZE(0..1))read-onlycurrent
acSysRedundantPowerSupplyTable
OBJECT-TYPE
Relevant only to M4K.
1.3.6.1.4.1.5003.9.10.10.4.27.23not-accessiblecurrent
acSysRedundantPowerSupplyEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.10.4.27.23.1not-accessiblecurrent
acSysRedundantPowerSupplyIndex
OBJECT-TYPE
Power-Supply's index in the system. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
acSysRedundantPowerSupplyGeographicalPosition
OBJECT-TYPE
The slot number in the chassis. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.2Unsigned32 (1..2)read-onlycurrent
acSysRedundantPowerSupplyExistence
OBJECT-TYPE
Is the Power-Supply present or missing. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.3INTEGER {present(1), missing(2)}read-onlycurrent
acSysRedundantPowerSupplyHwversion
OBJECT-TYPE
PS’s HW version. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.4SnmpAdminString (SIZE(0..20))read-onlycurrent
acSysRedundantPowerSupplyLEDs
OBJECT-TYPE
A bit-field representation of the Power-Supply LEDs' status. The first four bites represent the Power-Supply LED's status and the last four bites represent the Fault LED's status. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.5OCTET STRING (SIZE(0..20))read-onlycurrent
acSysRedundantPowerSupplySeverity
OBJECT-TYPE
The Severity of the power-supply according to the current active alarm in the alarm table. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.10.4.27.23.1.6INTEGER {cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)}read-onlycurrent