MIBs Depot

AC-PSTN-MIB

Registered at
1.3.6.1.4.1.5003.9.10.9
Last updated
2012-09-24 15:39
Organization
AudioCodes Ltd
Namespace
audiocodes
Source file
AC-PSTN-MIB
Digest
sha256:f31e3c594e3eb915fa4d60d4ebd9bfa11eea20c86d37e492f04fe0d8d8432c2f

Contact

Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com

Imports

FromSymbols
AUDIOCODES-TYPES-MIBacBoardMibs, acGeneric, acProducts, acRegistrations, audioCodes
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AC-PSTN-MIB
AUDIOCODES-TYPES-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
acPSTNConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1
acTrunkConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1
acTrunk
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.1
acTrunkTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.1.1not-accessiblecurrent
acTrunkEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1not-accessiblecurrent
acTrunkIndex
OBJECT-TYPE
Trunk ID at board in which the call is taking place. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1Unsigned32 (0..83)read-onlycurrent
acTrunkAdministrativeState
OBJECT-TYPE
Trunk Administrative State. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2INTEGER {locked(0), unLocked(1)}read-writecurrent
acTrunkProtocolType
OBJECT-TYPE
Used to set the PSTN protocol to be used for this trunk. Relevant only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS = 3 T1_TRANSPARENT = 4 E1_TRANSPARENT_31 = 5 E1_TRANSPARENT_30 = 6 E1_MFCR2 = 7 E1_CAS = 8 E1_RAW_CAS = 9 T1_NI2_ISDN = 10 T1_4ESS_ISDN = 11 T1_5ESS_9_ISDN = 12 T1_5ESS_10_ISDN = 13 T1_DMS100_ISDN = 14 J1_TRANSPARENT = 15 T1_NTT_ISDN = 16 E1_AUSTEL_ISDN = 17 E1_HKT_ISDN = 18 E1_KOR_ISDN = 19 T1_HKT_ISDN = 20 E1_QSIG = 21 E1_TNZ_ISDN = 22 T1_QSIG = 23 T1_IUA = 28 E1_IUA = 29 E1_FRENCH_VN6_ISDN = 30 E1_FRENCH_VN3_ISDN = 31 T1_EURO_ISDN = 34 T1_DMS100_MERIDIAN_ISDN = 35 T1_NI1_ISDN = 36 E1_DUA = 37 E1_Q931_PACKETS = 38 T1_Q931_PACKETS = 39 E1_NI2_ISDN = 40 E1-CAS-R15 = 41 V5 = 43 BRI-EURO-ISDN = 50 BRI-NI-2 = 51 BRI-DMS100 = 52 BRI-5ESS = 53 BRI-QSIG = 54 BRI-VNG = 55 BRI-NTT = 56 BRI-IUA = 57. . Access: Online. AC INI-Param: PROTOCOLTYPE
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3INTEGER {nONE(0), e1EuroISDN(1), t1Cas(2), t1RawCas(3), t1Transparent(4), e1Transparent31(5), e1Transparent30(6), e1Mfcr2(7), e1CasR2(8), e1RawCAS(9), t1-NI2ISDN(10), t1-4EssISDN(11), t1-5Ess-9-ISDN(12), t1-5Ess-10-ISDN(13), t1-Dms100-ISDN(14), j1-TRANSPARENT(15), t1-NTT-ISDN(16), e1-AUSTEL-ISDN(17), e1-HKT-ISDN(18), e1-KOR-ISDN(19), t1-HKT-ISDN(20), e1-QSIG(21), e1-TNZ-22(22), t1-EXTRA-23(23), t1-IUA(28), e1-IUA(29), e1-EXTRA-30(30), e1-FRENCH-VN3-ISDN(31), t1-EXTRA-32(32), eXTRA-33(33), t1-EURO-ISDN(34), t1-DMS100-MERIDIAN-ISDN(35), t1-NI1-ISDN(36), e1-DUA(37), e1-Q931-PACKETS(38), t1-Q931-PACKETS(39), e1-NI2-ISDN(40), e1-CAS-R15(41), v5(43), bRI-EURO-ISDN(50), bRI-NI-2(51), bRI-DMS100(52), bRI-5ESS(53), bRI-QSIG(54), bRI-VNG(55), bRI-NTT(56), bRI-IUA(57)}read-writecurrent
acTrunkClockMaster
OBJECT-TYPE
Used to select the trunk clock source. 0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the internal/TDM bus clock source depending on the parameter TDM Bus Clock Source). Access: Online. AC INI-Param: CLOCKMASTER
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4INTEGER {acCLOCK-MASTER-OFF(0), acCLOCK-MASTER-ON(1)}read-writecurrent
acTrunkFramingMethod
OBJECT-TYPE
Selects the Framing method to be used for this trunk. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5INTEGER {eXTENDED-SUPER-FRAME(0), sUPER-FRAME(1), e1-FRAMING-DDF(2), e1-FRAMING-MFF-CRC4(3), e1-FRAMING-MFF-CRC4-EXT(4), t1-FRAMING-F4(6), t1-FRAMING-F12(7), t1-FRAMING-ESF(8), t1-FRAMING-ESF-CRC6(9), t1-FRAMING-F72(10), t1-FRAMING-ESF-CRC6-JT(11)}read-writecurrent
acTrunkLineCode
OBJECT-TYPE
Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (for T1 or E1 trunks) 2 = Use HDB3 line code (for E1 trunks only). Access: Online. AC INI-Param: LINECODE
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6INTEGER {acB8ZS(0), acAMI(1), acHDB3(2)}read-writecurrent
acTrunkTraceLevel
OBJECT-TYPE
Defines the Trace level: acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 acFULL_ISDN_TRACE_WITH_DUPLICATION = 5 acISDN_Q931_RAW_DATA_TRACE = 6 acISDN_Q921_RAW_DATA_TRACE = 7 acISDN_Q931_Q921_RAW_DATA_TRACE = 8 acSS7_MTP2 = 10 acSS7_MTP2_AND_APPLI = 11 acSS7_MTP2_SL_L3_NO_MSU = 12 acSS7_AAL = 15. Access: Online. AC INI-Param: TRACELEVEL
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7INTEGER {acNO-TRACE(0), acFULL-ISDN-TRACE(1), acLAYER3-ISDN-TRACE(2), acONLY-ISDN-Q931-MSGS-TRACE(3), acLAYER3-ISDN-TRACE-NO-DUPLICATION(4), acFULL-ISDN-TRACE-WITH-DUPLICATION(5), acISDN-Q931-RAW-DATA-TRACE(6), acISDN-Q921-RAW-DATA-TRACE(7), acISDN-Q931-Q921-RAW-DATA-TRACE(8), acSS7-MTP2(10), acSS7-MTP2-AND-APPLI(11), acSS7-MTP2-SL-L3-NO-MSU(12), acSS7-AAL(15)}read-writecurrent
acTrunkDialPlanName
OBJECT-TYPE
Sets the Dial Plan name that will be used on the specific trunk. Range = string 11 characters. Access: Instant. AC INI-Param: CasTrunkDialPlanName
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8SnmpAdminString (SIZE(0..11))read-writecurrent
acTrunkLineType
OBJECT-TYPE
Line type. lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured to either E1 or T1. lineTypeUnknown(-1) - For non BRI IF when no lines are configured. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9INTEGER {lineTypeE1(10), lineTypeT1(11), lineTypeBRI(12), lineTypeUnknown(21)}read-onlycurrent
acTrunkAutoClockPriority
OBJECT-TYPE
Defines the trunk priority for auto-clock fallback (Priority range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default setting 100 = Do not choose this trunk). Access: Online. AC INI-Param: AutoClockTrunkPriority
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10Unsigned32 (0..100)read-writecurrent
acTrunkDeactivate
OBJECT-TYPE
Deactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. notAvailable(0) appears when the trunk is locked. The trunk can't be SET to this state. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11INTEGER {notAvailable(0), deActivated(1), activated(2)}read-writecurrent
acTrunkLoopbackConfig
OBJECT-TYPE
This variable represents the loopback state of the trunk. Access: Offline. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.12INTEGER {noLoop(0), lineLoop(1)}read-writecurrent
acTrunkLine
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.2
acTrunkLineTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.2.1not-accessiblecurrent
acTrunkLineEntry
OBJECT-TYPE
configuration of the DS1 interface.
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1not-accessiblecurrent
acTrunkLineBuildOutLoss
OBJECT-TYPE
Used to select the line build out loss to be used for this trunk. 0 = 0 dB 1 = 7.5 dB 2 = 15 dB 3 = 22.5 dB. Access: Online. AC INI-Param: LINEBUILDOUT.LOSS
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.1INTEGER {ac0DB(0), ac7-5DB(1), ac15DB(2), ac22-5DB(3)}read-writecurrent
acTrunkLineBuildOutOverwrite
OBJECT-TYPE
Used to overwrite the Framer's XPM registers values (these registers control the line pulse shape). 0 = No overwrite 1 = Overwrite. Access: Online. AC INI-Param: LINEBUILDOUT.OVERWRITE
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.2INTEGER {acNO-OVER-WRITE(0), acOVER-WRITE(1)}read-writecurrent
acTrunkLineBuildOutXPM0
OBJECT-TYPE
Used to control the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM0
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.3Unsigned32 (0..255)read-writecurrent
acTrunkLineBuildOutXPM1
OBJECT-TYPE
Used to control the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM1
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.4Unsigned32 (0..255)read-writecurrent
acTrunkLineBuildOutXPM2
OBJECT-TYPE
Used to control the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM2
1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.5Unsigned32 (0..255)read-writecurrent
acTrunkISDN
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.3
acTrunkISDNCommon
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.3.1
acTrunkISDNCommonTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1not-accessiblecurrent
acTrunkISDNCommonEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1not-accessiblecurrent
acTrunkISDNCommonTerminationSide
OBJECT-TYPE
Used to set the ISDN Termination to either User or Network. Termination = For ISDN only. User side = 0 Network side = 1. Access: Online. AC INI-Param: TERMINATIONSIDE
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.1INTEGER {acUSER-TERMINATION-SIDE(0), acNETWORK-TERMINATION-SIDE(1)}read-writecurrent
acTrunkISDNCommonQ931LayerResponseBehavior
OBJECT-TYPE
Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Access: Online. AC INI-Param: ISDNIBEHAVIOR
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.2Integer32 (-2147483647..2147483647)read-writecurrent
acTrunkISDNCommonIncomingCallsBehavior
OBJECT-TYPE
This is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNINCALLSBEHAVIOR
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.3Unsigned32 (0..4294967295)read-writecurrent
acTrunkISDNCommonOutgoingCallsBehavior
OBJECT-TYPE
This is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual. Access: Online. AC INI-Param: ISDNOUTCALLSBEHAVIOR
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.4Unsigned32 (0..65535)read-writecurrent
acTrunkISDNCommonGeneralCCBehavior
OBJECT-TYPE
This is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNGENERALCCBEHAVIOR
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.5Unsigned32 (0..65535)read-writecurrent
acTrunkISDNCommonIuaInterfaceId
OBJECT-TYPE
Defines the IUA trunk interface ID value - unsigned integer - in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.6Integer32 (-1..2147483647)read-onlycurrent
acTrunkISDNCommonDuplicateQ931BuffMode
OBJECT-TYPE
Activates / de-activates delivery of raw Q.931 messages. Refer to the VoPLib documentation ('ISDN Flexible Behavior'). Access: Online. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.7Unsigned32 (0..255)read-writecurrent
acTrunkISDNCommonBRILayer2Mode
OBJECT-TYPE
Indicates point to point or point to Multipoint mode for layer2. Applicable in BRI trunks only. One of the following values: Point to point = 0 Point to Multipoint = 1 . Access: Online. AC INI-Param: BriLayer2Mode
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.8INTEGER {bRI-L2-MODE-P2P(0), bRI-L2-MODE-P2MP(1)}read-writecurrent
acTrunkISDNCommonNSBehaviour2
OBJECT-TYPE
Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Refer to the VoPLib documentation (ISDN Flexible Behavior). Access: Online. AC INI-Param: ISDNNSBehaviour2
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.9Unsigned32 (0..65535)read-writecurrent
acTrunkISDNCommonRestartBChannel
OBJECT-TYPE
Sends restart request for a specific B-channel. Only ONE restart request at a time for a given trunk should be sent, since the restart state machine is not on per B-channel basis, but on a per trunk basis. Inputs: E1: -1, 1 - 31. T1: -1, 1 - 24. Use -1 to reset and re-initialize all B-channels in the selected trunk. Access: Online. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.10Integer32 (-1..31)read-writecurrent
acTrunkISDNNfas
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.3.2
acTrunkISDNNfasTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1not-accessiblecurrent
acTrunkISDNNfasEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1not-accessiblecurrent
acTrunkISDNNfasDchConfig
OBJECT-TYPE
Defines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = D-channel is Primary 1 = Backup 2 = NFAS. Access: Online. AC INI-Param: DCHCONFIG
1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.1INTEGER {acDCH-CONFIG-PRIMARY(0), acDCH-CONFIG-BACKUP(1), acDCH-CONFIG-NFAS(2)}read-writecurrent
acTrunkISDNNfasInterfaceId
OBJECT-TYPE
Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID. Refer to the VoPLib documentation(ISDN Flexible Behavior). Default = (unsigned char)-1. Range = 0 to 255. Access: Online. AC INI-Param: ISDNNFASINTERFACEID
1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.2Unsigned32 (0..255)read-writecurrent
acTrunkISDNNfasGroupNumber
OBJECT-TYPE
Relevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 9, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig parameters are ignored). Access: Online. AC INI-Param: NFASGROUPNUMBER
1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.3Unsigned32 (0..12)read-writecurrent
acTrunkISDNDpnss
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.3.3
acTrunkISDNDpnssTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1not-accessiblecurrent
acTrunkISDNDpnssEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1not-accessiblecurrent
acTrunkISDNDpnssBehavior
OBJECT-TYPE
The DPNSSBehaviour parameter represents a Bit field parameter. Each bit represents a specific type of DPNSS behavior. Currently only the first 2 bits are in use. - DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask 0x0001) When set to 1: DPNSS stops repeating SABMR after NL and NT1 limits are exceeded. When set to 0: DPNSS continues repeating SABMR after NL and NT1 limits are exceeded. Default is 0 (continue repeating SABMR) - DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002) When set to 1: the Startup Procedure is considered as a SUCCESS only when ALL DLCs succeeded to Reset When set to 0: the Startup Procedure is considered as a SUCCESS as soon as 1 DLC succeeded to Reset Default is 0: (only partial reset is considered as a success). . Access: Online. AC INI-Param: DPNSSBehavior
1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.1Unsigned32 (0..2147483647)read-writecurrent
acTrunkISDNDpnssNumRealChannels
OBJECT-TYPE
This parameter is relevant only to protocol ISDN DPNSS. Defines the number of real channels. Default value is 30. Valid range 1 to 30. Access: Online. AC INI-Param: DPNSSNumRealChannels
1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.2Unsigned32 (1..30)read-writecurrent
acTrunkISDNDpnssNumVirtualChannels
OBJECT-TYPE
This parameter is relevant only to protocol ISDN DPNSS. Defines the number of virtual channels. Default value is 30. Valid range 0 to 30. Access: Online. AC INI-Param: DPNSSNumVirtualChannels
1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.3Unsigned32 (0..30)read-writecurrent
acTrunkCAS
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.4
acTrunkCASTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.4.1not-accessiblecurrent
acTrunkCASEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1not-accessiblecurrent
acTrunkCASTablesIndex
OBJECT-TYPE
This parameter determines which CAS protocol file to use on a specific trunk. The index value corresponds to the number configured for the parameter CASFileName_X. Range = not greater than the parameter defining the PSTN CAS Table Num. Access: Online. AC INI-Param: CASTABLEINDEX
1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.1Unsigned32 (0..7)read-writecurrent
acTrunkCASTablePerChannel
OBJECT-TYPE
Sets the Cas protocol table index per channel. User need to set each channel the table number 0-7, with comma saperator between channels: '1,3,1,3,1,3..'. Access: Instant. AC INI-Param: CasChannelIndex
1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.2SnmpAdminString (SIZE(0..63))read-writecurrent
acTrunkV5
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.5
acTrunkV5Table
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.5.1not-accessiblecurrent
acTrunkV5Entry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1not-accessiblecurrent
acTrunkV5NumberOfCChannels
OBJECT-TYPE
Indicates the number of timeslots used as communication channels in a V5 trunk. 0 - No C-channel, the trunk is voice only. 1 - Timeslot 16 is used for the V5 signaling . Access: Online. AC INI-Param: V5NumberOfCChannels
1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.1Unsigned32 (0..1)read-writecurrent
acTrunkV5ProtocolSide
OBJECT-TYPE
Indicates the V5 side of the V5 protocol served by the trunk.. 0 - AN side. 1 - LE side . Access: Online. AC INI-Param: V5ProtocolSide
1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.2INTEGER {an-Side(0), le-Side(1)}read-writecurrent
acTrunkGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.1.8
acTrunkGlobalLifeLineType
OBJECT-TYPE
This parameter is used to define the type of trunk lifeline. Short trunks 1-2, 3-4. 0 = Activate lifeline on power down 1 = Activate lifeline on power down or on detection of LAN disconnect 2 = Activate lifeline on power down or on detection of LAN disconnect or loss of ping. Access: Offline. AC INI-Param: TrunkLifeLineType
1.3.6.1.4.1.5003.9.10.9.1.1.8.1INTEGER {hW-Only(0), hW-And-Link-Detection(1), hW-And-Link-And-Network-Detection(2)}read-writecurrent
acTrunkGlobalBChannelAlarms
OBJECT-TYPE
When set to 1 B-Channels Alarms will be sent. Access: Offline. AC INI-Param: BChannelAlarms
1.3.6.1.4.1.5003.9.10.9.1.1.8.2INTEGER {disable(0), enable(1)}read-writecurrent
acISDNConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.2
acMiscISDN
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.2.1
acMiscISDNQ931RelayMode
OBJECT-TYPE
Activates / de-activates the ISDN level 3 Q.931 Relay Mode. Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or Layer3_IS_IUA. Access: Offline. AC INI-Param: Q931RELAYMODE
1.3.6.1.4.1.5003.9.10.9.1.2.1.1INTEGER {none(0), activateLAPDmessaging(1), layer3-IS-IUA(3)}read-writecurrent
acMiscISDNDuplicateQ931BuffMode
OBJECT-TYPE
Access: Offline. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE
1.3.6.1.4.1.5003.9.10.9.1.2.1.2Unsigned32 (0..255)read-writeobsolete
acDS3Config
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.3
acDS3ConfigFramingMethod
OBJECT-TYPE
Used to select the physical DS3 framing method to be used in this board. 0 = M23 framing 1 = C Bit Parity. Access: Offline. AC INI-Param: DS3FRAMINGMETHOD
1.3.6.1.4.1.5003.9.10.9.1.3.1INTEGER {dS3-M23(0), dS3-C-BIT-PARITY(1)}read-writeobsolete
acDS3ConfigClockSource
OBJECT-TYPE
Selects the physical DS3 framing method to be used in this board. Applicable only to the TP-2810. 0 = DS3 Clock is recovered from the line 1 = DS3 trunk clock source is provided by the board's internal clock 2 = Clock is taken from the local PLL which is not synchronized with any other clock. Access: Offline. AC INI-Param: DS3CLOCKSOURCE
1.3.6.1.4.1.5003.9.10.9.1.3.2INTEGER {acClock-Source-External(0), acClock-Source-Local-Board(1), acClock-Source-Local-PLL(2)}read-writeobsolete
acDS3ConfigLineBuiltOut
OBJECT-TYPE
Used to select the DS3 line build out. Applies only to the TP-2810. Access: Offline. AC INI-Param: DS3LINEBUILTOUT
1.3.6.1.4.1.5003.9.10.9.1.3.3INTEGER {acLINE-BUILT-OUT-LEVEL-1(0), acLINE-BUILT-OUT-LEVEL-2(1), acLINE-BUILT-OUT-LEVEL-3(2), acLINE-BUILT-OUT-LEVEL-4(3), acLINE-BUILT-OUT-LEVEL-5(4), acLINE-BUILT-OUT-LEVEL-6(5)}read-writeobsolete
acCasConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.4
acCasConfigEnable
OBJECT-TYPE
This parameter enables or disables the possibility CAS protocol configuration. At TP6310 When this parameter is enable the conference will disabled in case it's relevant. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: CASProtocolEnable
1.3.6.1.4.1.5003.9.10.9.1.4.1INTEGER {disable(0), enable(1)}read-writecurrent
acCASFile
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.4.2
acCASFileTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.4.2.1not-accessiblecurrent
acCASFileEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1not-accessiblecurrent
acCASFileIndex
OBJECT-TYPE
Cas Table Indexd. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.1Unsigned32 (0..7)read-onlycurrent
acCASFileName
OBJECT-TYPE
This is a pointer to the CAS filename index (0-7). The index is CASFileName_X. CASFileName_0 through to CASFileName_7 are the path and names of the CAS protocol configuration files. AC INI-Param: CASFILENAME
1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
acSonetSDH
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.1.5
acSonetSDHTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.5.1not-accessiblecurrent
acSonetSDHEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.1.5.1.1not-accessiblecurrent
acSonetSDHIndex
OBJECT-TYPE
Fiber groupe index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.1Unsigned32 (1)not-accessiblecurrent
acSonetSDHFbrGrpMappingType
OBJECT-TYPE
Selects SDH/SONET mapping type (signal label + payload mapping type) for the PSTN interface. Generally per Fiber Group. Single Fiber Group supported in the PSTN interface of TP6310 and TP12610. Applicable only to the TP-6310 and TP-12610. Relevant only when acSysTDMBusType = acFRAMERS (2). 0 = Asynchronous VT1.5 and DS1 1 = Asynchronous TU12 and E1 3 = Asynchronous mapping of DS3 in STS1, DS3 channelized to DS1s 15 = Undefined Should be in coordination with other parameters as follows: - sonetMediumType - acTrunkProtocolType. Access: Offline. AC INI-Param: SDHFbrGrp_Mapping_Type
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.2INTEGER {asynchronousVT15andDS1(0), asynchronousTU12andE1(1), sTS1asynchronousDS3(3), undefined(15)}read-writecurrent
acSonetSDHFbrGrpKlmNumberingScheme
OBJECT-TYPE
Provides VC/VT numbering scheme for STM-1/OC3 fiber group. Access: Offline. AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.3INTEGER {numberingScheme-MLK(0), numberingScheme-LMK(1), numberingScheme-KLM(2)}read-writecurrent
acSonetSDHFbrGrpAPSDirectionMode
OBJECT-TYPE
Sets the Automatic Protection Switch Unidir/Bidir mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_DirMode
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.4INTEGER {unidirectional(0), bidirectional(1)}read-writecurrent
acSonetSDHFbrGrpAPSRevertMode
OBJECT-TYPE
Sets the Automatic Protection Switch Revertive mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_RevertMode
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.5INTEGER {nonRevertive(0), revertive(1)}read-writecurrent
acSonetSDHFbrGrpAPSWaitToRestoreTime
OBJECT-TYPE
Sets the APS Wait-to-restore time for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_WTR
1.3.6.1.4.1.5003.9.10.9.1.5.1.1.6Unsigned32 (5..12)read-writecurrent
acPSTNStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2
acTrunkStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2.1
acTrunkStatusTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.1.1not-accessiblecurrent
acTrunkStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.1.1.1not-accessiblecurrent
acTrunkStatusLedStatusColor
OBJECT-TYPE
Trunk led status color. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.1INTEGER {off(0), red(1), green(2)}read-onlycurrent
acTrunkStatusLedStatusState
OBJECT-TYPE
Trunk led status blinking rate. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.2INTEGER {steady(0), blink(1)}read-onlycurrent
acTrunkStatusChannels
OBJECT-TYPE
Reperesents Trunk's Channels-Status. Each nibble (half Byte) presents one channel status, as following: 1 - invalid B-Channel. 2 - None. 3 - Open. 4 - Media. 5 - SS7. 6 - HDLC. 7 - DPNSS. 8 - CAS. 9 - Out Of Service. 10 - Maintenance. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.3OCTET STRING (SIZE(0..16))read-onlycurrent
acTrunkStatusV5InterfaceNum
OBJECT-TYPE
V5.2 interface containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.4Integer32 (-1..31)read-onlycurrent
acTrunkStatusV5LinkID
OBJECT-TYPE
V5.2 link containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.5Integer32 (-1..62)read-onlycurrent
acTrunkStatusDChannel
OBJECT-TYPE
Describes the trunk's D channel status. 0 - dChannelEstablished 1 - dChannelNotEstablished 10 - dChannelNotApplicable. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.6INTEGER {dChannelEstablished(0), dChannelNotEstablished(1), dChannelNotApplicable(10)}read-onlycurrent
acTrunkStatusAlarm
OBJECT-TYPE
Describes the trunk's alarm status. 0 - Disabled. 1 - Active - OK. 2 - LOS/LOF Alarm. 3 - AIS Alarm. 4 - RAI Alram. 5 - D-Channel Alarm. 6 - Lower Layer Down. 7 - NFAS Alarm. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.7INTEGER {greyDisabled(0), greenActive(1), redLosLof(2), blueAis(3), yellowRai(4), orangeDChannel(5), purpleLowerLayerDown(6), darkOrangeNFASAlarm(7)}read-onlycurrent
acTrunkStatusDchannelActivity
OBJECT-TYPE
Defines D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.1.1.1.8INTEGER {dChannelActive(0), dChannelStandby(1), dChannelNotApplicable(2)}read-onlycurrent
acDigitalLegs
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2.2
acDigitalLegsTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.2.1not-accessiblecurrent
acDigitalLegsEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.2.1.1not-accessiblecurrent
acDigitalLegsLegIndex
OBJECT-TYPE
Decribes The Digital EndPoint In A Call. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.1Unsigned32 (0..5000)not-accessiblecurrent
acDigitalLegsCallIndex
OBJECT-TYPE
Decribes The Call which The Digital EndPoint Participant In It. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.2Unsigned32 (0..5000)read-onlycurrent
acDigitalLegsTrunk
OBJECT-TYPE
Describes the Trunk the Leg belong to. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.3Unsigned32 (0..255)read-onlycurrent
acDigitalLegsBchannel
OBJECT-TYPE
Describes the Bchannel the Leg belong to. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.4Unsigned32 (0..76500)read-onlycurrent
acDigitalLegsEchoCanceller
OBJECT-TYPE
Enables or Disables the Echo Canceller. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.5INTEGER {disable(0), enable(1)}read-onlycurrent
acDigitalLegsDTMFDetection
OBJECT-TYPE
Enables or Disables the DTMF Detection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.6INTEGER {disable(0), enable(1)}read-onlycurrent
acDigitalLegsVoiceVolume
OBJECT-TYPE
Describs the volume of the voice in dB. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.7Unsigned32 (0..20000)read-onlycurrent
acDigitalLegsHighPassFilter
OBJECT-TYPE
Enables or Disables theHigh Pass Filter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.8INTEGER {disable(0), enable(1)}read-onlycurrent
acDigitalLegsInputGain
OBJECT-TYPE
Describes the Input Gain on the leg in dB. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.9INTEGER {disable(0), enable(1)}read-onlycurrent
acDigitalLegsDSPDevice
OBJECT-TYPE
describes the DSP Device the Leg connected to. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.10Unsigned32 (0..20000)read-onlycurrent
acDigitalLegsLegName
OBJECT-TYPE
Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.2.1.1.11SnmpAdminString (SIZE(0..64))read-onlycurrent
acSDHKLMNumberingScheme
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2.3
acSDHKLMNumberingSchemeTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.3.1not-accessiblecurrent
acSDHKLMNumberingSchemeEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.3.1.1not-accessiblecurrent
acSDHKLMNumberingSchemeTrunkIndex
OBJECT-TYPE
Trunk Number. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.3.1.1.1Unsigned32 (0..5000)not-accessiblecurrent
acSDHKLMNumberingSchemeTUG3OrSTS1
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.3.1.1.2Unsigned32 (1..3)read-onlycurrent
acSDHKLMNumberingSchemeTUG2OrVTG
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.3.1.1.3Unsigned32 (1..7)read-onlycurrent
acSDHKLMNumberingSchemeTU12OrVT15
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.3.1.1.4Unsigned32 (1..4)read-onlycurrent
acFiberGroupStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2.4
acNFASGroupStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.9.2.5
acNFASGroupStatusTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.5.1not-accessiblecurrent
acNFASGroupStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.9.2.5.1.1not-accessiblecurrent
acNFASGroupStatusIndex
OBJECT-TYPE
NFAS Group Index. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.1Unsigned32 (1..12)not-accessiblecurrent
acNFASGroupStatusGroupStatus
OBJECT-TYPE
Describes the status of the NFAS group. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.2INTEGER {notExists(-1), inService(0), outOfService(1), swactInProgress(2)}read-onlycurrent
acNFASGroupStatusPrimaryDChannel
OBJECT-TYPE
The NFAS Group Configured Primary D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.3Integer32 (-1..83)read-onlycurrent
acNFASGroupStatusBackupDChannel
OBJECT-TYPE
The NFAS Group Configured Backup D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.4Integer32 (-1..83)read-onlycurrent
acNFASGroupStatusAction
OBJECT-TYPE
Switches ISDN signaling from active to standby (backup) D-channel of the NFAS Group. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.5INTEGER {actionDone(0), switchOver(1)}read-writecurrent
acNFASGroupStatusActionResult
OBJECT-TYPE
Action result. Includes action status (success, failure or notApplicable). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.6SnmpAdminString (SIZE(0..40))read-onlycurrent
acNFASGroupStatusPrimaryDChannelActivity
OBJECT-TYPE
Defines Primary D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.7INTEGER {dChannelActive(0), dChannelStandby(1), dChannelNotApplicable(2)}read-onlycurrent
acNFASGroupStatusBackupDChannelActivity
OBJECT-TYPE
Defines Backup D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.9.2.5.1.1.8INTEGER {dChannelActive(0), dChannelStandby(1), dChannelNotApplicable(2)}read-onlycurrent