MIBs Depot

AC-MEDIA-MIB

Registered at
1.3.6.1.4.1.5003.9.10.4
Last updated
2012-07-26 05:01
Organization
AudioCodes Ltd
Namespace
audiocodes
Source file
AC-MEDIA-MIB
Digest
sha256:c00ca61eadbf538eaaeae3e3f887a193e0777ea273c62f0de187b2958a145980

Contact

Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com

Imports

FromSymbols
AUDIOCODES-TYPES-MIBacBoardMibs, acGeneric, acProducts, acRegistrations, audioCodes
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AC-MEDIA-MIB
AUDIOCODES-TYPES-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
acMediaConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1
acMediaDSPConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.1
acMediaDSPConfigVersionTemplateNumber
OBJECT-TYPE
Selects the DSP load number. Each load has a different coder list, a different channel capacity and different features supported. Range = 0 to 255. Access: Offline. AC INI-Param: DSPVERSIONTEMPLATENUMBER
1.3.6.1.4.1.5003.9.10.4.1.1.1Unsigned32 (0..255)read-writecurrent
acMediaDspTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.1.1.21not-accessiblecurrent
acMediaDspEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.1.1.21.1not-accessiblecurrent
acMediaDspIndex
OBJECT-TYPE
Entry number in the table. AC INI-Param: DspTemplates_Index
1.3.6.1.4.1.5003.9.10.4.1.1.21.1.1Unsigned32 (0..1)not-accessiblecurrent
acMediaDspRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.1.21.1.2RowStatusread-createcurrent
acMediaDspTemplateNumber
OBJECT-TYPE
DSP template number. Access: Offline. AC INI-Param: DspTemplates_DspTemplateNumber
1.3.6.1.4.1.5003.9.10.4.1.1.21.1.3Unsigned32 (0..16)read-createcurrent
acMediaDspResourcesPercentage
OBJECT-TYPE
Percentage use for the specified template. Access: Offline. AC INI-Param: DspTemplates_DspResourcesPercentage
1.3.6.1.4.1.5003.9.10.4.1.1.21.1.4Unsigned32 (0..100)read-createcurrent
acMediaVoiceConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2
acVoice
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2.1
acVoicePayloadFormat
OBJECT-TYPE
Sets the voice payload format. Choose either 0 = RTP or 1 = ATM (which enables working with vendors that use G.726 ATM Payload Format over RTP. Uses the enum acTVoicePayloadFormat. 0 = VoicePayloadFormatRTP 1 = VoicePayloadFormatATM 2 = VoicePAyloadFormatIllegal. Access: Online. AC INI-Param: VOICEPAYLOADFORMAT
1.3.6.1.4.1.5003.9.10.4.1.2.1.1INTEGER {voicePayloadFormatRTP(0), voicePayloadFormatATM(1)}read-writecurrent
acVoiceVolume
OBJECT-TYPE
Defines the voice output gain control. Range: -32 dB to +31 dB in 1 dB steps -32 = mute Default = 0 = No Gain. Access: Online. AC INI-Param: VOICEVOLUME
1.3.6.1.4.1.5003.9.10.4.1.2.1.2Integer32 (-32..31)read-writecurrent
acVoiceInputGain
OBJECT-TYPE
Defines the PCM input gain. Range = -32 dB to +31 dB in 1 dB steps. Default = No Gain. Access: Online. AC INI-Param: INPUTGAIN
1.3.6.1.4.1.5003.9.10.4.1.2.1.3Integer32 (-32..31)read-writecurrent
acVoiceTestMode
OBJECT-TYPE
Defines the type of testing mode applied: 0 = Coder Loopback performs an encoder/decoder loopback inside the DSP device 1 = PCM Loopback loops back an incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to the outgoing PCM 3 = NoLoopback sets the channel to work in normal mode. Access: Online. AC INI-Param: TESTMODE
1.3.6.1.4.1.5003.9.10.4.1.2.1.4INTEGER {coderLoopback(0), pCMLoopback(1), toneInjection(2), noLoopback(3)}read-writecurrent
acVoiceTTYTransportType
OBJECT-TYPE
Defines the transferring method of TTY signals during a call 0 = Disable 1= Bypass 2 = Relay . Access: Online. AC INI-Param: TTYTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.2.1.5INTEGER {disable(0), bypass(1), inband-Relay(2)}read-writecurrent
acVoiceEnableMediaSecurity
OBJECT-TYPE
Enables or disables Media Security protocol (SRTP) . Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEMEDIASECURITY
1.3.6.1.4.1.5003.9.10.4.1.2.1.6INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceAriaProtocolSupport
OBJECT-TYPE
Enables or disables Aria encryption protocol. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable Supported on TP6310, TP8410 and M800. Access: Offline. AC INI-Param: AriaProtocolSupport
1.3.6.1.4.1.5003.9.10.4.1.2.1.7INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceCoderRate
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2.1.20
acVoiceCoderRateEVRC
OBJECT-TYPE
This parameter is used to configure the EVRC coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 4 kbps 3 = 8 kbps. Access: Online. AC INI-Param: EVRCRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.1INTEGER {variableRate(0), ac1kbps(1), ac4kbps(2), ac8kbps(3)}read-writecurrent
acVoiceCoderRateQCELP8
OBJECT-TYPE
This parameter is used to configure the QCELP8 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 2 kbps 3 = 4 kbps 4 = 8 kbps. Access: Online. AC INI-Param: QCELP8Rate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.2INTEGER {variableRate(0), ac1kbps(1), ac2kbps(2), ac4kbps(3), ac8kbps(4)}read-writecurrent
acVoiceCoderRateQCELP13
OBJECT-TYPE
This parameter is used to configure the QCELP13 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 3 kbps 3 = 7 kbps 4 = 13 kbps . Access: Online. AC INI-Param: QCELP13Rate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.3INTEGER {variableRate(0), ac1kbps(1), ac3kbps(2), ac7kbps(3), ac13kbps(4)}read-writecurrent
acVoiceCoderRateG729EVMaxBitRate
OBJECT-TYPE
Determines the maximum generation bitrate for all participants in a session using G729EV coder. This parameter is defined per session and is equal for all the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVMaxBitRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.4INTEGER {g729EV-RATE-8-KBPS(0), g729EV-RATE-12-KBPS(1), g729EV-RATE-14-KBPS(2), g729EV-RATE-16-KBPS(3), g729EV-RATE-18-KBPS(4), g729EV-RATE-20-KBPS(5), g729EV-RATE-22-KBPS(6), g729EV-RATE-24-KBPS(7), g729EV-RATE-26-KBPS(8), g729EV-RATE-28-KBPS(9), g729EV-RATE-30-KBPS(10), g729EV-RATE-32-KBPS(11), g729EV-RATE-UNDEFINED(15)}read-writecurrent
acVoiceCoderRateG729EVLocalMBS
OBJECT-TYPE
Determines the maximal bitrate, which may be used by the G729EV coder at a specific channel. This parameter is defined per channel and may vary between the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVLocalMBS
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.5INTEGER {g729EV-RATE-8-KBPS(0), g729EV-RATE-12-KBPS(1), g729EV-RATE-14-KBPS(2), g729EV-RATE-16-KBPS(3), g729EV-RATE-18-KBPS(4), g729EV-RATE-20-KBPS(5), g729EV-RATE-22-KBPS(6), g729EV-RATE-24-KBPS(7), g729EV-RATE-26-KBPS(8), g729EV-RATE-28-KBPS(9), g729EV-RATE-30-KBPS(10), g729EV-RATE-32-KBPS(11), g729EV-RATE-UNDEFINED(15)}read-writecurrent
acVoiceCoderRateG729EVReceiveMBS
OBJECT-TYPE
Determines the value of the MBS field of the G729EV frames to be sent to the other party. This parameter reflects the maximum bit rate, which the local G729EV supports as a receiver. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVReceiveMBS
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.6INTEGER {g729EV-RATE-8-KBPS(0), g729EV-RATE-12-KBPS(1), g729EV-RATE-14-KBPS(2), g729EV-RATE-16-KBPS(3), g729EV-RATE-18-KBPS(4), g729EV-RATE-20-KBPS(5), g729EV-RATE-22-KBPS(6), g729EV-RATE-24-KBPS(7), g729EV-RATE-26-KBPS(8), g729EV-RATE-28-KBPS(9), g729EV-RATE-30-KBPS(10), g729EV-RATE-32-KBPS(11), g729EV-RATE-UNDEFINED(15)}read-writecurrent
acVoiceCoderRateMsRtaForwardErrorCorrectionEnable
OBJECT-TYPE
Determines the Microsoft RTA coder forward error correction mode. 0 - Disable. 1 - Enable. Access: Online. AC INI-Param: MSRTAForwardErrorCorrectionEnable
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.7INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceCoderRateMsRtaTxBitRate
OBJECT-TYPE
Determines the Microsoft RTA coder TX bit rate. 0 - Automatic. Any value between 8,800 - 29,000. Access: Online. AC INI-Param: MSRTATxBitRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.8Unsigned32 (0..29000)read-writecurrent
acVoiceCoderRateSilkTxInbandFEC
OBJECT-TYPE
Determines the SILK encoder forward error correction mode. Access: Online. AC INI-Param: SilkTxInbandFEC
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.9INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceCoderRateSilkMaxAverageBitRate
OBJECT-TYPE
Determines the SILK encoder maximal average bit rate. Narrow band range is 5000-16000 .Wide band range is 8000-30000. Access: Online. AC INI-Param: SilkMaxAverageBitRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.10Unsigned32 (5000..30000)read-writecurrent
acVoiceCoderRateSpeexNBBitRate
OBJECT-TYPE
Determines the bitrate of Speex NB coder. Access: Instant. AC INI-Param: SpeexNBBitRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.11INTEGER {cE-SPEEX-NB-RATE-2-15-KBPS(1), cE-SPEEX-NB-RATE-5-95-KBPS(2), cE-SPEEX-NB-RATE-8-00-KBPS(3), cE-SPEEX-NB-RATE-11-0-KBPS(4), cE-SPEEX-NB-RATE-15-0-KBPS(5), cE-SPEEX-NB-RATE-18-2-KBPS(6), cE-SPEEX-NB-RATE-24-6-KBPS(7), cE-SPEEX-NB-RATE-3-95-KBPS(8)}read-writecurrent
acVoiceCoderRateSpeexWBBitRate
OBJECT-TYPE
Determines the bitrate of Speex WB coder. Access: Instant. AC INI-Param: SpeexWBBitRate
1.3.6.1.4.1.5003.9.10.4.1.2.1.20.12INTEGER {cE-SPEEX-WB-RATE-3-95-KBPS(0), cE-SPEEX-WB-RATE-5-75-KBPS(1), cE-SPEEX-WB-RATE-7-75-KBPS(2), cE-SPEEX-WB-RATE-9-80-KBPS(3), cE-SPEEX-WB-RATE-12-8-KBPS(4), cE-SPEEX-WB-RATE-16-8-KBPS(5), cE-SPEEX-WB-RATE-20-6-KBPS(6), cE-SPEEX-WB-RATE-23-8-KBPS(7), cE-SPEEX-WB-RATE-27-8-KBPS(8), cE-SPEEX-WB-RATE-34-2-KBPS(9), cE-SPEEX-WB-RATE-42-2-KBPS(10)}read-writecurrent
acVoiceAGC
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2.2
acVoiceAGCEnable
OBJECT-TYPE
Activates the AGC (Automatic Gain Control). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEAGC
1.3.6.1.4.1.5003.9.10.4.1.2.2.1INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceAGCGainSlope
OBJECT-TYPE
Determines the AGC (Automatic Gain Control) convergence rate. Range = 0 to 31 (according to acTAGCGainSlope) Default = 3 (= 1 db/sec). Access: Online. AC INI-Param: AGCGAINSLOPE
1.3.6.1.4.1.5003.9.10.4.1.2.2.2Unsigned32 (0..31)read-writecurrent
acVoiceAGCRedirection
OBJECT-TYPE
Determines the AGC (Automatic Gain Control) direction. 0 = AGC works on signals from the TDM side 1 = AGC works on signals coming from the Network side. Access: Online. AC INI-Param: AGCREDIRECTION
1.3.6.1.4.1.5003.9.10.4.1.2.2.3Unsigned32 (0..1)read-writecurrent
acVoiceAGCTargetEnergy
OBJECT-TYPE
Determines the signal energy value [-dBm] that the AGC (Automatic Gain Control) attempts to attain. Range = 0 to 63. Access: Online. AC INI-Param: AGCTARGETENERGY
1.3.6.1.4.1.5003.9.10.4.1.2.2.4Unsigned32 (0..63)read-writecurrent
acVoiceAGCMinGain
OBJECT-TYPE
Defines the minimum gain by the AGC when activated [- db]. Range = 0 to -31. Access: Offline. AC INI-Param: AGCMINGAIN
1.3.6.1.4.1.5003.9.10.4.1.2.2.5Unsigned32 (0..31)read-writecurrent
acVoiceAGCMaxGain
OBJECT-TYPE
Defines the maximum gain by the AGC when activated [db]. Range = 0 to 18. Access: Offline. AC INI-Param: AGCMAXGAIN
1.3.6.1.4.1.5003.9.10.4.1.2.2.6Unsigned32 (0..18)read-writecurrent
acVoiceAGCDisableFastAdaptation
OBJECT-TYPE
Disables the AGC Fast Adaptation mode. Enable = 1 Disable = 0. Access: Offline. AC INI-Param: AGCDISABLEFASTADAPTATION
1.3.6.1.4.1.5003.9.10.4.1.2.2.7INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceEC
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2.3
acVoiceECEnable
OBJECT-TYPE
Enables or disables the Echo Canceller. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEECHOCANCELLER
1.3.6.1.4.1.5003.9.10.4.1.2.3.1INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceECMaxLength
OBJECT-TYPE
Defines the maximum board EC (Echo Canceler) length capability. 0 = EC length determined internally to reach maximum channel capacity. 4 = 32 msec 11 = 64 msec 22 = 128 msec TP-1610 only: Using 64 or 128 msec reduces the channel capacity to 200 channels. . Access: Offline. AC INI-Param: MAXECHOCANCELLERLENGTH
1.3.6.1.4.1.5003.9.10.4.1.2.3.2INTEGER {eCLengthDefault(0), eCLength15MSec(1), eCLength20MSec(2), eCLength25MSec(3), eCLength32MSec(4), eCLength35MSec(5), eCLength40MSec(6), eCLength45MSec(7), eCLength50MSec(8), eCLength55MSec(9), eCLength60MSec(10), eCLength64MSec(11), eCLength128MSec(22)}read-writecurrent
acVoiceECHybridLoss
OBJECT-TYPE
Sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to the enumeration acTECHybridLoss. 0 = 6 dBm 2 = 0 dBm 3 = 3 dBm. Access: Online. AC INI-Param: ECHYBRIDLOSS
1.3.6.1.4.1.5003.9.10.4.1.2.3.3INTEGER {eCHybridLoss6DBM(0), eCHybridLoss0DBM(2), eCHybridLoss3DBM(3)}read-writecurrent
acVoiceECToneDetector
OBJECT-TYPE
Used to configure the Echo Canceler Tone Detector. Detects a 2100 Hz tone at the input signal to the TDM (received signal). Improves Echo Canceler operation accordingly. Detects 2100, 2100 with phase reversals and 2100 with AM. Improves the operation of the Echo Canceler by slowing adaptation when the signal is detected. This data is also used by the fax state machine. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableToneDetector
1.3.6.1.4.1.5003.9.10.4.1.2.3.4INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceECComfortNoiseGeneration
OBJECT-TYPE
Use this parameter to enable or enable Echo Canceler Comfort Noise Generation, which generates comfort noise when the Non Linear Processor (NLP) is active. When the NLP ascertains that the signal is echo and not doubletalk and decides to clip, instead of transmitting silence it transmits a synthesized signal similar to the background noise. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableComfortNoiseGeneration
1.3.6.1.4.1.5003.9.10.4.1.2.3.5INTEGER {disable(0), enable(1)}read-writecurrent
acVoiceSC
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.2.4
acVoiceSCMode
OBJECT-TYPE
Enables or disables Silence Suppression Mode. 0 = Disable = SILENCE_COMPRESION_DISABLE 1 = Enable = SILENCE_COMPRESION_ENABLE 2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE. Access: Online. AC INI-Param: ENABLESILENCECOMPRESSION
1.3.6.1.4.1.5003.9.10.4.1.2.4.1INTEGER {sILENCE-COMPRESION-DISABLE(0), sILENCE-COMPRESION-ENABLE(1), sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2)}read-writecurrent
acVoiceSCVBRCoderDTXMin
OBJECT-TYPE
Defines the minimum number of frames gap between two SID frames, when using the EVRC voice activity detector. . Access: Online. AC INI-Param: EVRCDTXMin
1.3.6.1.4.1.5003.9.10.4.1.2.4.2Unsigned32 (0..20000)read-writecurrent
acVoiceSCVBRCoderDTXMax
OBJECT-TYPE
Defines the maximum number of frames gap between two SID frames, when using the EVRC voice activity detector. Access: Online. AC INI-Param: EVRCDTXMax
1.3.6.1.4.1.5003.9.10.4.1.2.4.3Unsigned32 (0..20000)read-writecurrent
acVoiceSCVBRCoderHangover
OBJECT-TYPE
For indicating the desired number of silence frames at the beginning of each silence period, when using the VBR CODER silence suppression. . Access: Online. AC INI-Param: VBRCoderHangover
1.3.6.1.4.1.5003.9.10.4.1.2.4.4Unsigned32 (0..255)read-writecurrent
acMediaFaxModemConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3
acFaxModem
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.1
acFMCommon
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.1.1
acFMCommonRelayVolume
OBJECT-TYPE
Determines the fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm. Access: Online. AC INI-Param: FAXMODEMRELAYVOLUME
1.3.6.1.4.1.5003.9.10.4.1.3.1.1.1Integer32 (-18..-3)read-writecurrent
acFMCommonV34Transport
OBJECT-TYPE
Sets the V.34 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V34MODEMTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.1.1.2INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3), ansMute(4)}read-writecurrent
acFMCommonEnableInbandNetworkDetection
OBJECT-TYPE
Enables or disables inband network detection related to fax/modem. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: EnableFaxModemInbandNetworkDetection
1.3.6.1.4.1.5003.9.10.4.1.3.1.1.3INTEGER {disable(0), enable(1)}read-writecurrent
acFMCommonCEDTransferMode
OBJECT-TYPE
0 - transfer CED using T38. 1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0). 2 - transfer CED using RFC, and block CED over VBD/VoIP. 3 - transfer CED using RFC in parallel with CED over VBD/VoIP. Access: Instant. AC INI-Param: CEDTransferMode
1.3.6.1.4.1.5003.9.10.4.1.3.1.1.4INTEGER {usingFaxRelayOrVBD(0), voiceModeOrVBD(1), rFC4733BlockingRTPVBD(2), rFC4733AlongWithRTPVBD(3)}read-writecurrent
acFMBypass
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.1.2
acFMBypassCoderType
OBJECT-TYPE
Users can use this parameter to set the fax/modem bypass coder (according to acTCoders). 0 = G.711 A-Law 1 = G.711 Mu-Law. Access: Online. AC INI-Param: FAXMODEMBYPASSCODERTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.1INTEGER {g711Alaw-64(0), g711Mulaw(1)}read-writecurrent
acFMBypassPacketizationPeriod
OBJECT-TYPE
Defines the number of basic frames to generate one RTP fax/modem bypass packet. Access: Online. AC INI-Param: FAXMODEMBYPASSM
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.2Unsigned32 (1..12)read-writecurrent
acFMBypassBasicPacketInterval
OBJECT-TYPE
Sets the basic Fax / Modem Bypass RTP packet rate. 0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) 1 = 5 msec (PACKET_INTERVAL_5_MSEC) 2 = 10 msec (PACKET_INTERVAL_10_MSEC) 3 = 20 msec (PACKET_INTERVAL_20_MSEC). Access: Online. AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.3INTEGER {pACKET-INTERVAL-DEFAULT(0), pACKET-INTERVAL-5-MSEC(1), pACKET-INTERVAL-10-MSEC(2), pACKET-INTERVAL-20-MSEC(3)}read-writecurrent
acFMBypassDJBufMinDelay
OBJECT-TYPE
Determines the Jitter Buffer constant delay (in milliseconds) during a Fax & Modem Bypass session. (The minimum Jitter Buffer Size). Range = 0 to 150. Access: Online. AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.4Unsigned32 (0..150)read-writecurrent
acFMBypassFaxBypassOutputGain
OBJECT-TYPE
Defines the fax bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: FaxBypassOutputGain
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.5Integer32 (-31..31)read-writecurrent
acFMBypassModemBypassOutputGain
OBJECT-TYPE
Defines the modem bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: ModemBypassOutputGain
1.3.6.1.4.1.5003.9.10.4.1.3.1.2.6Integer32 (-31..31)read-writecurrent
acFMNSE
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.1.3
acFMNSEPayloadType
OBJECT-TYPE
Users can use this parameter to modify the NSE packet's payload type. Range = 96 to 127. Access: Online. AC INI-Param: NSEPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.1.3.1Unsigned32 (96..127)read-writecurrent
acFMNSEMode
OBJECT-TYPE
Enables or disables Cisco's NSE fax / modem automatic pass-through mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NSEMODE
1.3.6.1.4.1.5003.9.10.4.1.3.1.3.2INTEGER {disable(0), enable(1)}read-writecurrent
acFax
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.2
acFaxTransportMode
OBJECT-TYPE
Sets the Fax over IP transport method. 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: FAXTRANSPORTMODE
1.3.6.1.4.1.5003.9.10.4.1.3.2.1INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)}read-writecurrent
acFaxBypassPayloadType
OBJECT-TYPE
Users can use this parameter to modify the Fax Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (102). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: FAXBYPASSPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.2.2Unsigned32 (0..127)read-writecurrent
acFaxRelayECMEnable
OBJECT-TYPE
Enables or disables the using of ECM mode during Fax Relay. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: FAXRELAYECMENABLE
1.3.6.1.4.1.5003.9.10.4.1.3.2.3INTEGER {disable(0), enable(1)}read-writecurrent
acFaxRelayMaxRate
OBJECT-TYPE
Limits the maximum rate at which fax messages are transmitted. 0 = 2400 bps 1 = 4800 bps 2 = 7200 bps 3 = 9600 bps 4 = 12000 bps 5 = 14400 bps 6 = 16800 bps 7 = 19200 bps 8 = 21600 bps 9 = 24000 bps 10 = 26400 bps 11 = 28800 bps 12 = 31200 bps 13 = 33600 bps. Access: Online. AC INI-Param: FAXRELAYMAXRATE
1.3.6.1.4.1.5003.9.10.4.1.3.2.4INTEGER {acRate2400bps(0), acRate4800bps(1), acRate7200bps(2), acRate9600bps(3), acRate12000bps(4), acRate14400bps(5), acRate16800bps(6), acRate19200b(7), acRate21600bps(8), acRate24000bps(9), acRate26400bps(10), acRate28800bps(11), acRate31200bps(12), acRate33600bps(13)}read-writecurrent
acFaxRelayRedundancyDepth
OBJECT-TYPE
Determines the depth of redundancy for fax packets. This parameter is applicable only to non-V.21 packets. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy. Access: Online. AC INI-Param: FAXRELAYREDUNDANCYDEPTH
1.3.6.1.4.1.5003.9.10.4.1.3.2.5Unsigned32 (0..2)read-writecurrent
acFaxEnhancedRelayRedundancyDepth
OBJECT-TYPE
Determines the number of repetitions to be applied to control packets when using the T.38 standard. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy 3 = 3 packet redundancy 4 = Maximum redundancy. Access: Online. AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH
1.3.6.1.4.1.5003.9.10.4.1.3.2.6Unsigned32 (0..4)read-writecurrent
acFaxCNGDetectorMode
OBJECT-TYPE
Determines the CNG Detector mode. 0 = Disable 1 = Relay 2 = Event Only. Access: Online. AC INI-Param: CNGDETECTORMODE
1.3.6.1.4.1.5003.9.10.4.1.3.2.7INTEGER {cNG-DETECTOR-MODE-DISABLE(0), cNG-DETECTOR-MODE-RELAY(1), cNG-DETECTOR-MODE-EVENT-ONLY(2)}read-writecurrent
acFaxV34TransportMethod
OBJECT-TYPE
Determines the V.34 fax transport method. One of the following values: 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V34FAXTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.2.8INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)}read-writecurrent
acFaxT38Version
OBJECT-TYPE
T38 fax relay version. 0 = T.38 version 0 (from 06/1998) 3 = T.38 version 3 (V.34 over T.38 support) Default = 3. Access: Online. AC INI-Param: T38Version
1.3.6.1.4.1.5003.9.10.4.1.3.2.9INTEGER {t38Version0(0), t38Version3(3)}read-writecurrent
acModem
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.3
acModemV22Transport
OBJECT-TYPE
Sets the V.22 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V22MODEMTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.3.1INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)}read-writecurrent
acModemV23Transport
OBJECT-TYPE
Sets the V.23 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V23MODEMTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.3.2INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)}read-writecurrent
acModemV32Transport
OBJECT-TYPE
Sets the V.32 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V32MODEMTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.3.3INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3), ansMute(4)}read-writecurrent
acModemBypassPayloadType
OBJECT-TYPE
Users can use this parameter to modify the Modem Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (103). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: MODEMBYPASSPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.3.3.4Unsigned32 (0..127)read-writecurrent
acModemBellTransportType
OBJECT-TYPE
Use this parameter to set the Bell modem transport method. 0 = Transparent 2 = Bypass (enum ByPassEnable) 3 = Transparent with Events (enum EventsOnly). Access: Online. AC INI-Param: BellModemTransportType
1.3.6.1.4.1.5003.9.10.4.1.3.3.5INTEGER {disable(0), byPassEnable(2), eventsOnly(3)}read-writecurrent
acModemV21Transport
OBJECT-TYPE
Sets the V.21 modem transport method (must be set to 0 = Disable). 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V21ModemTransportType
1.3.6.1.4.1.5003.9.10.4.1.3.3.6INTEGER {disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)}read-writedeprecated
acModemEnableV150ModemRelaySupport
OBJECT-TYPE
Determines whether to enable V.150.1 modem relay support. Range: 0 - Disable 1 - Enable. Access: Offline. AC INI-Param: EnableV150ModemRelaySupport
1.3.6.1.4.1.5003.9.10.4.1.3.3.7INTEGER {disable(0), enable(1)}read-writeobsolete
acV150dot1
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.3.4
acV150dot1AllocationProfile
OBJECT-TYPE
Selects the V.150.1 profile, determining how many DSP channels have V.150.1 support. Range = 0 to 3. Access: Offline. AC INI-Param: V1501AllocationProfile
1.3.6.1.4.1.5003.9.10.4.1.3.4.1Unsigned32 (0..20)read-writecurrent
acV150dot1SSEPayloadTypeRx
OBJECT-TYPE
SSE payload type RX. Access: Online. AC INI-Param: V1501SSEPayloadTypeRx
1.3.6.1.4.1.5003.9.10.4.1.3.4.2Unsigned32 (96..127)read-writecurrent
acV150dot1SSEPayloadTypeTx
OBJECT-TYPE
SSE payload type TX. Access: Online. AC INI-Param: V1501SSEPayloadTypeTx
1.3.6.1.4.1.5003.9.10.4.1.3.4.3Unsigned32 (96..127)read-writecurrent
acV150dot1SSERedundancyDepth
OBJECT-TYPE
SSE is a part of V150.1 modem relay protocol and SSE messages are sent over RTP. SSE redundancy refers to the sending of SSE messages several times to increase reliability. This parameter determines the number of times each SSE message is to be resent. Access: Online. AC INI-Param: V1501SSERedundancyDepth
1.3.6.1.4.1.5003.9.10.4.1.3.4.4Unsigned32 (1..6)read-writecurrent
acV150dot1SPRTPayloadTypeRx
OBJECT-TYPE
SPRT payload type RX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeRx
1.3.6.1.4.1.5003.9.10.4.1.3.4.5Unsigned32 (96..127)read-writecurrent
acV150dot1SPRTPayloadTypeTx
OBJECT-TYPE
SPRT payload type TX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeTx
1.3.6.1.4.1.5003.9.10.4.1.3.4.6Unsigned32 (96..127)read-writecurrent
acV150dot1SPRTTransportChannel0MaxPayloadSize
OBJECT-TYPE
SPRT transport channel 0 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize
1.3.6.1.4.1.5003.9.10.4.1.3.4.7Unsigned32 (140..256)read-writecurrent
acV150dot1SPRTTransportChannel2MaxPayloadSize
OBJECT-TYPE
SPRT transport channel 2 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize
1.3.6.1.4.1.5003.9.10.4.1.3.4.8Unsigned32 (132..256)read-writecurrent
acV150dot1SPRTTransportChannel2MaxWindowSize
OBJECT-TYPE
SPRT transport channel 2 max window size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize
1.3.6.1.4.1.5003.9.10.4.1.3.4.9Unsigned32 (8..32)read-writecurrent
acV150dot1SPRTTransportChannel3MaxPayloadSize
OBJECT-TYPE
SPRT transport channel 3 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize
1.3.6.1.4.1.5003.9.10.4.1.3.4.10Unsigned32 (140..256)read-writecurrent
acMediaRtpRtcpConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4
acRtpRtcp
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.1
acRtpRtcpBrokenConnectionEventTimeout
OBJECT-TYPE
Determines for how long the RTP connection should be broken before the Broken Connection event is issued. In units of 100 msec. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT
1.3.6.1.4.1.5003.9.10.4.1.4.1.1Unsigned32 (3..2684354)read-writecurrent
acRtpRtcpBrokenConnectionEventActivationMode
OBJECT-TYPE
Determines if the broken connection mechanism is activated when the RTP stream is activated or when the first RTP packet is received. 0 = After First incoming packet (default) 1 = Upon channels RTP activation. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE
1.3.6.1.4.1.5003.9.10.4.1.4.1.2INTEGER {afterFirstIncomingRTPPacket(0), onRTPStreamActivation(1)}read-writecurrent
acRtpRtcpBasicRTPPacketInterval
OBJECT-TYPE
Selects the RTP packet rate for sample based coders (such as G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. 0 = Default (set internally) 1 = 5 msec 2 = 10 msec 3 = 20 msec. Access: Online. AC INI-Param: BASICRTPPACKETINTERVAL
1.3.6.1.4.1.5003.9.10.4.1.4.1.3INTEGER {pACKET-INTERVAL-DEFAULT(0), pACKET-INTERVAL-5-MSEC(1), pACKET-INTERVAL-10-MSEC(2), pACKET-INTERVAL-20-MSEC(3)}read-writecurrent
acRtpRtcpConnectionEstablishNotificationMode
OBJECT-TYPE
Determines the notification mode for the RTP connection establishment event acEV_CONNECTION_ESTABLISHED. 0 = Notify only after a broken connection event 1 = Also notify when the first RTP packet is received. Access: Online. AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE
1.3.6.1.4.1.5003.9.10.4.1.4.1.4INTEGER {afterBrokenConnection(0), uponFirstRTPFrameDetection(1)}read-writecurrent
acRtpRtcpEnableMediaUDPChecksum
OBJECT-TYPE
Determines whether to enable the UDP checksum calculation for RTP media TX over IPv4. One of the following possible values: 0 = Disable (No checksum: UDP checksum for IPv4 TX = 0) 1 = Enable (UDP checksum will be in the UDP header upon IPv4 TX) . Access: Offline. AC INI-Param: EnableMediaUDPChecksum
1.3.6.1.4.1.5003.9.10.4.1.4.1.5INTEGER {disable(0), enable(1)}read-writecurrent
acRtp
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.2
acRtpBaseUDPPort
OBJECT-TYPE
Defines the lower boundary of UDP ports to be used by the board. The upper boundary is calculated on the basis of BoardBaseUDPPort + 10 * (Number of Channels). This parameter value must be a multiple of 10. . Access: Offline. AC INI-Param: BASEUDPPORT
1.3.6.1.4.1.5003.9.10.4.1.4.2.1Unsigned32 (1024..65535)read-writecurrent
acRtpComfortNoiseEnable
OBJECT-TYPE
When set to 1 (Enable), SID packets are sent with the RTP SID type (RFC 3389). 0 = Disable 1 = Enable Determines whether Silence Indicator (SID) packets that are sent and received are according to RFC 3389. 0 = Disabled (default). 1 = Enabled. Note: Applicable only to MP-11x and Mediant 1000. . Access: Online. AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.2INTEGER {disable(0), enable(1)}read-writecurrent
acRtpEnableRFC2658Interleaving
OBJECT-TYPE
When enabled, RTP packets include an interleaving byte for VBR coders. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLERFC2658INTERLEAVING
1.3.6.1.4.1.5003.9.10.4.1.4.2.3INTEGER {withOut-RFC2658Interleaving-And-TOC(0), including-RFC2658Interleaving-And-TOC(1), including-TOC-Only(2), interleave-Bundling(3)}read-writeobsolete
acRtpRxTxMode
OBJECT-TYPE
Selects which RTP directions are enabled. Both Tx and Rx sides can be disabled. 0 = RTPTxRx 1 = RTPTxOnly 2 = RTPRxOnly 3 = RTPUnactive 4 = RTPRxRFC2833Tx. Access: Online. AC INI-Param: RTPDIRECTIONCONTROL
1.3.6.1.4.1.5003.9.10.4.1.4.2.4INTEGER {rTPTxRx(0), rTPTxOnly(1), rTPRxOnly(2), rTPUnactive(3), rTPRxRFC2833Tx(4)}read-writecurrent
acRtpRFC2833TxPayloadType
OBJECT-TYPE
Controls the RFC 2833 Tx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833TXPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.5Unsigned32 (96..127)read-writecurrent
acRtpRFC2833RxPayloadType
OBJECT-TYPE
Controls the RFC 2833 Rx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833RXPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.6Unsigned32 (96..127)read-writecurrent
acRtpRedundancyPayloadType
OBJECT-TYPE
This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter 'RTP Payload Type'. Range: 96 to 127. Access: Online. AC INI-Param: RFC2198PAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.7Unsigned32 (96..127)read-writecurrent
acRtpRedundancyDepth
OBJECT-TYPE
Redundancy depth of RFC 2198 redundancy packets. 0 = Disabled In Gen 3 boards: range is 0-5 For other Gens 0-1. Access: Online. AC INI-Param: RTPREDUNDANCYDEPTH
1.3.6.1.4.1.5003.9.10.4.1.4.2.8Unsigned32 (0..5)read-writecurrent
acRtpPacketizationFactor
OBJECT-TYPE
Defines the number of DSP payloads for generating one RTP packet. Range = Hardware dependent. Access: Online. AC INI-Param: RTPPACKINGFACTOR
1.3.6.1.4.1.5003.9.10.4.1.4.2.9Unsigned32 (1..12)read-writecurrent
acRtpNoOpPayloadType
OBJECT-TYPE
User can modify the Noop packets RTP Payload type by setting this parameter. Range = 96 to 127. Access: Online. AC INI-Param: RTPNOOPPAYLOADTYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.10Unsigned32 (96..127)read-writecurrent
acRtpNoOpEnable
OBJECT-TYPE
Enables / disable Noop packets sending mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NoOpEnable
1.3.6.1.4.1.5003.9.10.4.1.4.2.11INTEGER {disable(0), enable(1)}read-writecurrent
acRtpNoOpInterval
OBJECT-TYPE
Used to modify the Noop packets sending interval Parameter value is in milliseconds Default value = 10 sec (10000 msec) Range = 20 to 600000 (20 msec to 10 min - 10 min = 600000). Access: Online. AC INI-Param: NoOpInterval
1.3.6.1.4.1.5003.9.10.4.1.4.2.12Unsigned32 (20..600000)read-writecurrent
acRtpVBRCoderHeaderFormat
OBJECT-TYPE
0 - payload only (no header, no toc, no m-factor) 1- support RFC 2658 format, 1 byte for interleaving header (always 0) and toc, no m-factor 2 payload including toc only, allow m-factor 3- RFC 3358 format . Access: Online. AC INI-Param: VBRCoderHeaderFormat
1.3.6.1.4.1.5003.9.10.4.1.4.2.13INTEGER {withOut-RFC2658Interleaving-And-TOC(0), including-RFC2658Interleaving-And-TOC(1), including-TOC-Only(2), interleave-Bundling(3)}read-writecurrent
acRtpAMRCoderHeaderFormat
OBJECT-TYPE
AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame contains CRM byte and toc RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables RFC_3267_INTERLEAVING=2 - supported as receivers only. Access: Online. AC INI-Param: AMRCODERHEADERFORMAT
1.3.6.1.4.1.5003.9.10.4.1.4.2.14INTEGER {cE-AMR-DEFAULT-FORMAT(0), cE-AMR-RFC-3267-BUNDLING(1), cE-AMR-RFC-3267-INTERLEAVING(2), cE-AMR-IF2(3)}read-writecurrent
acRtpAMRFECRedundancyDepth
OBJECT-TYPE
Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. 0 = No Redundancy 1 = Redundancy depth of a single packet 2 = Redundancy depth of 2 packets 3 = Redundancy depth of 3 packets . Access: Online. AC INI-Param: AMRFECREDUNDANCYDEPTH
1.3.6.1.4.1.5003.9.10.4.1.4.2.15INTEGER {cE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0), cE-AMR-FEC-REDUNDANCY-LEVEL-1(1), cE-AMR-FEC-REDUNDANCY-LEVEL-2(2), cE-AMR-FEC-REDUNDANCY-LEVEL-3(3)}read-writecurrent
acRtpAMRFECNumOfMngtPolicyEntries
OBJECT-TYPE
Sets the number of entries to be defined at the AMR management policy table. Each entry defines the policy of a different rate. Access: Online. AC INI-Param: AMRFECNUMBEROFCODECMODES
1.3.6.1.4.1.5003.9.10.4.1.4.2.16Unsigned32 (0..9)read-writecurrent
acRtpAMRFECDelayHysteresis
OBJECT-TYPE
Defines the hysteresis of the Delay Threshold for AMR Hand-out events (in msec). Access: Online. AC INI-Param: AMRFECDELAYHYSTERESIS
1.3.6.1.4.1.5003.9.10.4.1.4.2.17Unsigned32 (0..255)read-writecurrent
acRtpAMRFECDelayThreshold
OBJECT-TYPE
Defines the one-way delay value (in msec) that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default). Access: Online. AC INI-Param: AMRFECDELAYTHRESHHOLD
1.3.6.1.4.1.5003.9.10.4.1.4.2.18Unsigned32 (0..255)read-writecurrent
acRtpQcelpCoderHeaderFormat
OBJECT-TYPE
Determines whether to define a separate header format for the QCELP coder (different to the header format of EVRC coder). One of the following values: -1 - QCELP coder uses the same header format as EVRC coder, according to VBRCoderHeaderFormat parameter. 1 to 2 - QCELP coder uses the value defined by this parameter to define its header format. This parameter is relevant only for Control Protocol users. TPNCP and PCI users should always use -1 value. Access: Instant. AC INI-Param: QcelpCoderHeaderFormat
1.3.6.1.4.1.5003.9.10.4.1.4.2.19INTEGER {parameter-Is-Not-Used(-1), including-RFC2658Interleaving-And-TOC(1), including-TOC-Only(2)}read-writecurrent
acRtpAMROctetAlignedEnable
OBJECT-TYPE
0 = disable the AMR Octet Aligned mode. 1 = enable the AMR Octet Aligned mode. Access: Online. AC INI-Param: AmrOctetAlignedEnable
1.3.6.1.4.1.5003.9.10.4.1.4.2.20INTEGER {disable(0), enable(1)}read-writecurrent
acAMRFECCodecPolicies
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.2.21
acAMRFECCodecPoliciesTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1not-accessiblecurrent
acAMRFECCodecPoliciesEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1not-accessiblecurrent
acAMRFECCodecPoliciesIndex
OBJECT-TYPE
AC INI-Param: AMRFECCodecPolicies_Index
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.1Unsigned32 (0..7)not-accessiblecurrent
acAMRFECCodecPoliciesRowStatus
OBJECT-TYPE
AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.2RowStatusread-createcurrent
acAMRFECCodecPoliciesRate
OBJECT-TYPE
AMR Rate x of policy x (values 0-8). Access: Online. AC INI-Param: AMRFECCodecPolicies_Rate
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.3Unsigned32read-createcurrent
acAMRFECCodecPoliciesRedundancyLevel
OBJECT-TYPE
Redundancy Level for policy x. Same values as RFC 3267 Redundancy field. Access: Online. AC INI-Param: AMRFECCodecPolicies_RedundancyLevel
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.4Unsigned32read-createcurrent
acAMRFECCodecPoliciesThreshold
OBJECT-TYPE
FLR (Frame Loss Ratio) threshold of policy 1. Values are taken from 3GPP TS 44.318 (0-63). Access: Online. AC INI-Param: AMRFECCodecPolicies_Threshold
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.5Unsigned32read-createcurrent
acAMRFECCodecPoliciesHysteresis
OBJECT-TYPE
Hysteresis of FLR threshold for policy 1. Values are taken from 3GPP TS 44.318. (0-15). Access: Online. AC INI-Param: AMRFECCodecPolicies_Hysteresis
1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.6Unsigned32read-createcurrent
acRtcp
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.3
acRtcpDisableIntervalRandomization
OBJECT-TYPE
Controls whether RTCP report intervals are randomized or whether each report interval accords exactly to the parameter defining RTCP Mean Tx Interval (in milliseconds). 0 = Randomize 1 = Dont Randomize. Access: Online. AC INI-Param: DISABLERTCPRANDOMIZE
1.3.6.1.4.1.5003.9.10.4.1.4.3.1Unsigned32 (0..1)read-writecurrent
acRtcpXr
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.4
acRtcpXrBurstThreshold
OBJECT-TYPE
voice quality monitoring - excessive burst alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONBURSTHR
1.3.6.1.4.1.5003.9.10.4.1.4.4.1Integer32 (-1..12)read-writecurrent
acRtcpXrDelayThreshold
OBJECT-TYPE
voice quality monitoring - excessive delay alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONDELAYTHR
1.3.6.1.4.1.5003.9.10.4.1.4.4.2Integer32 (-1..12)read-writecurrent
acRtcpXrEndOofCallRvalDelayThreshold
OBJECT-TYPE
voice quality monitoring - end of call low quality alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONEOCRVALTHR
1.3.6.1.4.1.5003.9.10.4.1.4.4.3Integer32 (-1..12)read-writecurrent
acRtcpXrGMin
OBJECT-TYPE
voice quality monitoring - minimum gap size (number of frames). Access: Online. AC INI-Param: VQMONGMIN
1.3.6.1.4.1.5003.9.10.4.1.4.4.4Unsigned32 (0..255)read-writecurrent
acRtcpXrEnable
OBJECT-TYPE
Sets voice quality monitoring (RTCP-XR) mode. 0 = Disable 1 = Enable all 2 = Enable Only Calculation. Access: Offline. AC INI-Param: VQMONENABLE
1.3.6.1.4.1.5003.9.10.4.1.4.4.5INTEGER {disable(0), enable(1), enableOnlyCalculation(2)}read-writecurrent
acVideoRtpRtcp
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.4.5
acVideoRtpRtcpDisableRtcpIntervalRandomization
OBJECT-TYPE
Determines whether to enable RTCP Interval Randomization. One of the following values: 0 Enable RTCP Interval Randomization 1 Disable RTCP Interval Randomization . Access: Online. AC INI-Param: VideoDisableRtcpIntervalRandomization
1.3.6.1.4.1.5003.9.10.4.1.4.5.1INTEGER {disable(0), enable(1)}read-writecurrent
acVideoRtpRtcpMeanTxInterval
OBJECT-TYPE
Defines the mean interval between two transmitted RTCP packets (milliseconds). If the interval is set to 0, no RTCP packets are transmitted at all. Access: Online. AC INI-Param: VideoRtcpMeanTxInterval
1.3.6.1.4.1.5003.9.10.4.1.4.5.2Unsigned32 (0..65535)read-writecurrent
acVideoRtpRtcpBrokenConnectionActivationMode
OBJECT-TYPE
Broken connection event activation mode. 0 - Activate broken connection after the arrival of the first RTP packet. 1 - Activate broken connection immediately after the Activate RTP command. . Access: Online. AC INI-Param: VideoBrokenConnectionActivationMode
1.3.6.1.4.1.5003.9.10.4.1.4.5.3INTEGER {afterFirstIncomingRtpPacket(0), onRtpStreamActivation(1)}read-writecurrent
acVideoRtpRtcpBrokenConnectionEventTimeout
OBJECT-TYPE
Timeout that defines when broken connection event occurs. Time resolution is 20msec. Access: Online. AC INI-Param: VideoBrokenConnectionEventTimeout
1.3.6.1.4.1.5003.9.10.4.1.4.5.4Unsigned32 (0..65535)read-writecurrent
acMediaIBSConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.5
acIBS
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.5.1
acIBSAnalogSignalTransportType
OBJECT-TYPE
Determines the analog signal transport type. 0 = Ignore 1 = Transfer hookflash via RFC 2833. Access: Online. AC INI-Param: ANALOGSIGNALTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.5.1.1INTEGER {ignore(0), transfer(1)}read-writecurrent
acIBSDTMFVolume
OBJECT-TYPE
Defines and controls the DTMF generation volume [-dBm]. Range = -31 to 0. Access: Online. AC INI-Param: DTMFVOLUME
1.3.6.1.4.1.5003.9.10.4.1.5.1.2Integer32 (-31..0)read-writecurrent
acIBSDTMFTransportType
OBJECT-TYPE
Defines the type of DTMF transport. 0 = Erase DTMFs from voice transport not relayed to remote 2 = DTMFs not erased are not relayed to remote 3 = DTMFs are muted from the voice stream and relayed according to RFC 2833 7 = DTMFs are sent according to RFC 2833 and muted when received. Access: Online. AC INI-Param: DTMFTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.5.1.3INTEGER {acMuteDTMF(0), acTransparentDTMF(2), acRFC2833RelayDTMF(3), acRFC2833RelayDecoderMute(7)}read-writecurrent
acIBSMFTransportType
OBJECT-TYPE
Defines the type of MF transport. 0 = Erase MFs from voice transport not relayed to remote 2 = MFs not erased are not relayed to remote 3 = MFs are muted from the voice stream and relayed according to RFC 2833. Access: Online. AC INI-Param: MFTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.5.1.4INTEGER {acMuteMF(0), acTransparentMF(2), acRFC2833RalayMF(3)}read-writecurrent
acIBSTrunkTestingTonesEnable
OBJECT-TYPE
Enables or disables trunk testing tones. 0 = Disables trunk testing tones 1 = Enables trunk testing tones. Access: Offline. AC INI-Param: ENABLETRUNKTESTINGTONES
1.3.6.1.4.1.5003.9.10.4.1.5.1.5INTEGER {disables(0), enables(1)}read-writecurrent
acIBSCASRelayTransportMode
OBJECT-TYPE
Controls the ABCD signaling transport type over IP. 0 = No Relay over the network 1 = Enable CAS relay according to RFC 2833. Access: Online. AC INI-Param: CASTRANSPORTTYPE
1.3.6.1.4.1.5003.9.10.4.1.5.1.6INTEGER {cASEventsOnly(0), cASRFC2833Relay(1)}read-writecurrent
acIBSRxDtmfHangOverTime
OBJECT-TYPE
Used to configure the Voice Silence time (in ms units) after playing DTMF or MF digits to the TDM side that arrived as Relay from the Network side. Range from 0 to 2000, Default 1000. Access: Online. AC INI-Param: RxDtmfHangOverTime
1.3.6.1.4.1.5003.9.10.4.1.5.1.7Unsigned32 (0..2000)read-writecurrent
acIBSTxDtmfHangOverTime
OBJECT-TYPE
Voice Silence time (in ms units) after detecting the end of DTMF or MF digits at the TDM side when the DTMF Transport Type is either Relay or Mute.This feature allows the user to configure the silence time. . Access: Online. AC INI-Param: TxDtmfHangOverTime
1.3.6.1.4.1.5003.9.10.4.1.5.1.8Unsigned32 (0..2000)read-writecurrent
acIBSDTMFTwistControl
OBJECT-TYPE
Defines a delta (in dB) between the high and low frequency component in the DTMF signal. dB Positive values cause the higher frequency component to be stronger than the lower one. Negative values cause the opposite effect. For any parameter value, both components change so that their average is constant. Range = -10 to 10. Access: Offline. AC INI-Param: DTMFGenerationTwist
1.3.6.1.4.1.5003.9.10.4.1.5.1.9Integer32 (-10..10)read-writecurrent
acIBSNTEMaxDuration
OBJECT-TYPE
Maximal time for sending NTEs (Named Telephony Events) to the network, regardless of the time range when the TDM signal is detected. -1= NTE will stop only upon detection of End event (default). Access: Online. AC INI-Param: NTEMaxDuration
1.3.6.1.4.1.5003.9.10.4.1.5.1.10Integer32 (-1..200000000)read-writecurrent
acIBSDetectors
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.5.2
acIBSDetectorsMFR1Enable
OBJECT-TYPE
Enables or disables detection of MFR1 signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR1DETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.1INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsMFR2ForwardEnable
OBJECT-TYPE
Enables or disables detection of MFR2 forward signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR2FORWARDDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.2INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsMFR2BackwardEnable
OBJECT-TYPE
Enables or disables detection of MFR2 backward signaling. Access: Online. AC INI-Param: MFR2BACKWARDDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.3INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsR1LineEnable
OBJECT-TYPE
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R1LINEDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.4INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsR2LineEnable
OBJECT-TYPE
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R2LINEDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.5INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsAC15Enable
OBJECT-TYPE
Enables or disables detection of Line signaling. Access: Online. AC INI-Param: AC15DETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.6INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsDTMFEnable
OBJECT-TYPE
Enables or disables detection of DTMF signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: DTMFDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.7INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsCallProgressEnable
OBJECT-TYPE
Enables or disables detection of Call Progress Tones. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: CALLPROGRESSDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.8INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsUserDefinedToneEnable
OBJECT-TYPE
Enables or disables detection of User Defined Tones signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: USERDEFINEDTONEDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.9INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsDetectionRedirection
OBJECT-TYPE
Determines the IBS (In-Band Signaling) Detection Direction. 0 = PCM 1 = Network. Access: Online. AC INI-Param: IBSDETECTIONREDIRECTION
1.3.6.1.4.1.5003.9.10.4.1.5.2.10INTEGER {pcm(0), network(1)}read-writecurrent
acIBSDetectorsSS4Enable
OBJECT-TYPE
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS4DETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.11INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsMFSS5Enable
OBJECT-TYPE
Enables or disables detection of MF SS5 line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFSS5DETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.12INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsSS5Enable
OBJECT-TYPE
Detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS5DETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.13INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsSITEnable
OBJECT-TYPE
Enables or disables SIT (Special Information Tone) detection according to the ITU-T recommendation E.180/Q.35. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: SITDETECTORENABLE
1.3.6.1.4.1.5003.9.10.4.1.5.2.14INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsCOTEnable
OBJECT-TYPE
Enables or disables Continuity Test tone detection and generation according to the ITU-T Q.724 recommendation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLECONTINUITYTONES
1.3.6.1.4.1.5003.9.10.4.1.5.2.15INTEGER {disable(0), enable(1)}read-writecurrent
acIBSDetectorsR1DetectionStandard
OBJECT-TYPE
This parameter determines which one of the R1 MF protocol flavors will be used for detection. 0 = ITU 1 = R1.5. Access: Offline. AC INI-Param: R1DetectionStandard
1.3.6.1.4.1.5003.9.10.4.1.5.2.16INTEGER {mfR1DetectionStandardItu(0), mfR1DetectionStandardR15(1)}read-writecurrent
acIBSDetectorsUDTDetectorFrequencyDeviation
OBJECT-TYPE
Defines the deviation allowed for the detection of each signal frequency. Units are in Hertz. Valid values range 1-50. Default value 50 Hz. . Access: Offline. AC INI-Param: UDTDETECTORFREQUENCYDEVIATION
1.3.6.1.4.1.5003.9.10.4.1.5.2.17Unsigned32 (1..50)read-writecurrent
acIBSDetectorsCPTDetectorFrequencyDeviation
OBJECT-TYPE
Defines the deviation allowed for the detection of each CPT signal frequency. Units are in Hertz. Valid values range 1-30. Default value 10 Hz. . Access: Offline. AC INI-Param: CPTDETECTORFREQUENCYDEVIATION
1.3.6.1.4.1.5003.9.10.4.1.5.2.18Unsigned32 (1..30)read-writecurrent
acIPMediaConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6
acIPMedia
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.1
acIPMediaDSPDetectorsEnable
OBJECT-TYPE
Enables or disables DSP IP Media Detectors. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEDSPIPMDETECTORS
1.3.6.1.4.1.5003.9.10.4.1.6.1.1INTEGER {disable(0), enable(1)}read-writecurrent
acIPMediaEnableMCApplication
OBJECT-TYPE
Enables media control functionality. Access: Offline. AC INI-Param: ENABLEMEDIACONTROL
1.3.6.1.4.1.5003.9.10.4.1.6.1.2INTEGER {disable(0), enable(1)}read-writecurrent
acIPMAnswerDetector
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.2
acIPMAnswerDetectorEnable
OBJECT-TYPE
Enables or disables activation of the AD (Answer Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEANSWERDETECTOR
1.3.6.1.4.1.5003.9.10.4.1.6.2.1INTEGER {no(0), yes(1)}read-writecurrent
acIPMAnswerDetectorActivityDelay
OBJECT-TYPE
Controls (in 100 msec resolution) the time between sending Activation command (AnswerDetector = 1) and the time that the detector actually starts to work. Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORACTIVITYDELAY
1.3.6.1.4.1.5003.9.10.4.1.6.2.2Unsigned32 (0..128)read-writecurrent
acIPMAnswerDetectorSilenceTime
OBJECT-TYPE
This parameter controls the silence time period (in 100 msec resolution) from no speech input until the END_OF_SPEECH event is sent. 10 = 1 second Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORSILENCETIME
1.3.6.1.4.1.5003.9.10.4.1.6.2.3Unsigned32 (0..128)read-writecurrent
acIPMAnswerDetectorRedirection
OBJECT-TYPE
Determines the AD (Answer Detector) Redirection. 0 (PCM) = Speech from the PCM side is detected 1 (Network) = Speech from the IP side is detected. Access: Online. AC INI-Param: ANSWERDETECTORREDIRECTION
1.3.6.1.4.1.5003.9.10.4.1.6.2.4INTEGER {speechPCMSideDetected(0), speechIPSideDetected(1)}read-writecurrent
acIPMAnswerDetectorSensitivity
OBJECT-TYPE
Controls the AD (Answer Detector) sensitivity. The allowed values are different for different boards: DSP Gen2-based products: range 0 - 2, default 0. DSP Gen2-based products: range 0 - 7, default 3. Lowest value matches highest sensitivity and vice versa. Access: Online. AC INI-Param: ANSWERDETECTORSENSITIVITY
1.3.6.1.4.1.5003.9.10.4.1.6.2.5Unsigned32 (0..7)read-writecurrent
acIPMEnergyDetector
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.3
acIPMEnergyDetectorEnable
OBJECT-TYPE
Activates the ED (Energy Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEENERGYDETECTOR
1.3.6.1.4.1.5003.9.10.4.1.6.3.1INTEGER {no(0), yes(1)}read-writecurrent
acIPMEnergyDetectorQualityFactor
OBJECT-TYPE
Determines the ED's (Energy Detector's) sensitivity (0 -10). 0 = Insensitive 10 = Most Sensitive Range = 0 to 10. Access: Online. AC INI-Param: ENERGYDETECTORQUALITYFACTOR
1.3.6.1.4.1.5003.9.10.4.1.6.3.2Unsigned32 (0..10)read-writecurrent
acIPMEnergyDetectorThreshold
OBJECT-TYPE
Defines the ED's (Energy Detector's) threshold. A signal exceeding the threshold invokes an 'Above' or 'Below' event. ActualThreshold = -44 dBm + (EDThreshold * 6) Default = 3 = -26 dBm Range: 0 to 7. Access: Online. AC INI-Param: ENERGYDETECTORTHRESHOLD
1.3.6.1.4.1.5003.9.10.4.1.6.3.3Unsigned32 (0..7)read-writecurrent
acIPMEnergyDetectorEnergyRedirection
OBJECT-TYPE
Selects the direction of the energy detection. 0 = Detect from the TDM side 1 = Detect from the network side. Access: Online. AC INI-Param: ENERGYDETECTORREDIRECTION
1.3.6.1.4.1.5003.9.10.4.1.6.3.4INTEGER {tDM(0), network(1)}read-writecurrent
acIPMediaPatternDetector
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.4
acIPMediaPatternDetectorEnable
OBJECT-TYPE
Enables or disables activation of the PD (Pattern Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEPATTERNDETECTOR
1.3.6.1.4.1.5003.9.10.4.1.6.4.1INTEGER {no(0), yes(1)}read-writecurrent
acIPMediaPatternDetectorDetectionThreshold
OBJECT-TYPE
Defines the number of consecutive patterns to trigger the pattern detection event. Range = 0 to 31. Access: Offline. AC INI-Param: PDTHRESHOLD
1.3.6.1.4.1.5003.9.10.4.1.6.4.2Unsigned32 (0..31)read-writecurrent
acIPMediaAMD
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.5
acIPMediaAMDDetectionDirection
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) detection direction. One of the following values: 0 = Detection from the TDM side 1 = Detection from the Network side. Access: Online. AC INI-Param: AMDDETECTIONDIRECTION
1.3.6.1.4.1.5003.9.10.4.1.6.5.1INTEGER {acAmdTdmDetection(0), acAmdNetworkDetection(1)}read-writecurrent
acIPMediaAMDSensitivity
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) detection sensitivity: 0 = Best detection of an answering machine 7 = Best detection of a live call. Access: Online. AC INI-Param: AMDDetectionSensitivity
1.3.6.1.4.1.5003.9.10.4.1.6.5.2Unsigned32 (0..7)read-writecurrent
acIPMediaAMDDetectionSensitivityHighResolution
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) high resolution detection sensitivity. The high resolution has 16 levels of sensitivity while the normal resolution (Answer Machine Detector Sensitivity) has 8 levels. 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel
1.3.6.1.4.1.5003.9.10.4.1.6.5.3Unsigned32 (0..15)read-writecurrent
acIPMediaAMDSensitivityResolution
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) detection sensitivity resolution: 0 = Normal detection sensitivity resolution (8 sensitivity levels) 1 = High detection sensitivity resolution (16 sensitivity levels). Access: Online. AC INI-Param: AMDSensitivityParameterSuit
1.3.6.1.4.1.5003.9.10.4.1.6.5.4INTEGER {normal(0), high(1)}read-writecurrent
acIPMediaAMDBeepDetectionTimeout
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) Beep detection timeout. Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). Access: Online. AC INI-Param: AMDBeepDetectionTimeout
1.3.6.1.4.1.5003.9.10.4.1.6.5.5Unsigned32 (0..1638)read-writecurrent
acIPMediaAMDBeepDetectionSensitivity
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) Beep detection sensitivity. 0 - Least sensitive. 3 - Most sensitive. Access: Online. AC INI-Param: AMDBeepDetectionSensitivity
1.3.6.1.4.1.5003.9.10.4.1.6.5.6Unsigned32 (0..3)read-writecurrent
acIPMediaAMDSensitivityParameterSuit
OBJECT-TYPE
Determines the serial number of the AMD (Answer Machine Detector) parameter suit: 0 = USA Parameter Suit with normal detection sensitivity resolution (8 sensitivity levels) 1 = USA Parameter Suit with high detection sensitivity resolution (16 sensitivity levels) 2-7 : other countries parameter suits with up to 16 sensitivity levels. Access: Online. AC INI-Param: AMDSensitivityParameterSuit
1.3.6.1.4.1.5003.9.10.4.1.6.5.7Unsigned32 (0..7)read-writecurrent
acIPMediaAMDSensitivityLevel
OBJECT-TYPE
Determines the AMD (Answer Machine Detector) level of detection sensitivity. It has 16 levels of sensitivity : 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel
1.3.6.1.4.1.5003.9.10.4.1.6.5.8Unsigned32 (0..15)read-writecurrent
acIPMConference
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.6
acIPMConferenceGASNMinInterval
OBJECT-TYPE
Minimum interval between Active Speaker Notification (ASN) events. An ASN event reports on the active speakers in a conference. The event is issued whenever the active speakers change. units = 100 ms Minimum configurable interval between events is 500 ms (5 units). Access: Instant. AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL
1.3.6.1.4.1.5003.9.10.4.1.6.6.1Unsigned32 (10..65535)read-writecurrent
acIPMConferenceEnergythreshold
OBJECT-TYPE
Conference - Minimum energy level for a user to be included in Active Speaker Notification (ASN) events (units: -dBm). Valid range 0 to (-39) dbm. Access: Instant. AC INI-Param: ActiveSpeakerEnergyThreshold
1.3.6.1.4.1.5003.9.10.4.1.6.6.2Unsigned32 (0..39)read-writecurrent
acIPMConferenceEnableHDConference
OBJECT-TYPE
Enable\Disable HD Conference. Access: Offline. AC INI-Param: EnableHDConference
1.3.6.1.4.1.5003.9.10.4.1.6.6.3INTEGER {disable(0), enable(1)}read-writecurrent
acIPMVideoConference
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.6.7
acIPMVideoConferenceSwitchingInterval
OBJECT-TYPE
Determines the video view rotation interval in seconds. Applicable when using timer trigger switching mode. Access: Online. AC INI-Param: VideoConferenceSwitchingInterval
1.3.6.1.4.1.5003.9.10.4.1.6.7.1Unsigned32 (0..65535)read-writecurrent
acIPMVideoConferenceEnableActiveSpeakerHighlight
OBJECT-TYPE
Highlights the speaker for participants viewing a symmetric layout (2x2 or 3x3) . 0 - Don't highlight active speaker. 1 - Highlight active speaker. Access: Online. AC INI-Param: VideoEnableActiveSpeakerHighlight
1.3.6.1.4.1.5003.9.10.4.1.6.7.2INTEGER {disable(0), enable(1)}read-writecurrent
acIPMVideoConferenceParticipantType
OBJECT-TYPE
Indicates a participant's capabilities in the conference. Regular (2) Regular participant who is able to both send and receive video. . Access: Online. AC INI-Param: VideoConferenceParticipantType
1.3.6.1.4.1.5003.9.10.4.1.6.7.3INTEGER {regular(2)}read-writecurrent
acIPMVideoConferenceParticipantTriggerMode
OBJECT-TYPE
Participant trigger mode defines the trigger for modifying the participant's view. Voice Activated Video Switch (0) A participants view will be changed according to the active speakers detection. Timer (1) A participants view is rotated every configured time among the different video participants in the conference. Fixed (3) A participants view is fixed. . Access: Online. AC INI-Param: VideoConferenceParticipantTriggerMode
1.3.6.1.4.1.5003.9.10.4.1.6.7.4INTEGER {triggerMode-Speaker(0), triggerMode-Timer(1), triggerMode-Fixed(3)}read-writecurrent
acIPMVideoConferenceParticipantLayout
OBJECT-TYPE
Indicates the participant's view layout. 1 user (0). 2*2 users (1). All same size. 3*3 users (2). All same size. . Access: Online. AC INI-Param: VideoConferenceParticipantLayout
1.3.6.1.4.1.5003.9.10.4.1.6.7.5INTEGER {layout-1XUSER(0), layout-2x2-USERS(1), layout-3x3-USERS(2)}read-writecurrent
acIPMVideoConferenceEnableConferenceParticipantSelfView
OBJECT-TYPE
Self view indication. 0 - The participant cannot view himself 1 - The participant can view himself. Access: Online. AC INI-Param: VideoEnableConferenceParticipantSelfView
1.3.6.1.4.1.5003.9.10.4.1.6.7.6INTEGER {disable(0), enable(1)}read-writecurrent
acMediaCallerIDConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.7
acCallerID
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.7.1
acCallerIDTypes
OBJECT-TYPE
Defines the supported Caller ID standard. 0 = Bellcore 1 = ETSI 2 = NTT 4 = British 16 = ETSI_ETS 17 = Denmark 18 = Indian 19 = Brazilian. Access: Online. AC INI-Param: CALLERIDTYPE
1.3.6.1.4.1.5003.9.10.4.1.7.1.1INTEGER {bellcore(0), eTSI(1), nTT(2), bT(4), dTMF-Based-ETSI(16), denmark(17), indian(18), brazilian(19)}read-writecurrent
acCallerIDTransportType
OBJECT-TYPE
Defines the CallerID Transport type. 0 = Disable 1 = Relay 3 = Mute. Access: Online. AC INI-Param: CallerIDTransportType
1.3.6.1.4.1.5003.9.10.4.1.7.1.2INTEGER {callerID-DISABLE(0), callerID-RELAY(1), callerID-MUTE(3)}read-writecurrent
acCallerIDDTMFBasedMaxDigits
OBJECT-TYPE
Determines the maximum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MAXDTMFDIGITSINCIDSTRING
1.3.6.1.4.1.5003.9.10.4.1.7.1.3Unsigned32 (0..26)read-writecurrent
acCallerIDDTMFBasedMinDigits
OBJECT-TYPE
Determines the mimumum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MINDTMFDIGITSINCIDSTRING
1.3.6.1.4.1.5003.9.10.4.1.7.1.4Unsigned32 (0..26)read-writecurrent
acCallerIDNTTDIDSignallingForm
OBJECT-TYPE
Configures the signalling format used when generating an NTT DID. 0 = FSK Siganl 1 = DTMF Based Signal. Access: Online. AC INI-Param: NTTDIDSignallingForm
1.3.6.1.4.1.5003.9.10.4.1.7.1.5INTEGER {nttDidFskSignalling(0), nttDidDtmfBasedSignalling(1)}read-writecurrent
acMediaNetworkConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.8
acMediaNetwork
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.8.1
acMediaNetworkDisableNAT
OBJECT-TYPE
Enables or disables the NAT feature. 0 = Do not disable NAT 1 = Disable NAT. Access: Online. AC INI-Param: DISABLENAT
1.3.6.1.4.1.5003.9.10.4.1.8.1.1INTEGER {no(0), yes(1)}read-writecurrent
acMediaNetworkRtpIpTos
OBJECT-TYPE
Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. Access: Instant. AC INI-Param: IPTOS
1.3.6.1.4.1.5003.9.10.4.1.8.1.2Unsigned32 (0..15)read-writedeprecated
acMediaNetworkRtpIpPrecedence
OBJECT-TYPE
Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. Access: Instant. AC INI-Param: IPPRECEDENCE
1.3.6.1.4.1.5003.9.10.4.1.8.1.3Unsigned32 (0..7)read-writedeprecated
acMediaNetworkIPDiffServ
OBJECT-TYPE
Defines the value of the 'DiffServ' field in the IP header for media (RTP) traffic. Range: 0 to 63. Access: Instant. AC INI-Param: IPDIFFSERV
1.3.6.1.4.1.5003.9.10.4.1.8.1.4Unsigned32 (0..63)read-writedeprecated
acMediaNetworkInboundLatchMode
OBJECT-TYPE
Determines the way of handling incoming media packets from non-expected address/port. Access: Online. AC INI-Param: InboundMediaLatchMode
1.3.6.1.4.1.5003.9.10.4.1.8.1.5INTEGER {strict(0), dynamic(1)}read-writecurrent
acMediaJBConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.9
acJitterBuffer
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.9.1
acJitterBufferMinDelay
OBJECT-TYPE
Defines the Dynamic Jitter Buffer Minimum Delay (in msec). Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFMINDELAY
1.3.6.1.4.1.5003.9.10.4.1.9.1.1Unsigned32 (0..150)read-writecurrent
acJitterBufferOptFactor
OBJECT-TYPE
Defines the Dynamic Jitter Buffer frame error/delay optimization. Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFOPTFACTOR
1.3.6.1.4.1.5003.9.10.4.1.9.1.2Unsigned32 (0..13)read-writecurrent
acVideoJitterBuffer
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.9.2
acVideoJitterBufferMinDelay
OBJECT-TYPE
Jitter buffer minimum delay in milliseconds. Must be less than JitterBufferMaxDelay. Access: Online. AC INI-Param: VideoJitterBufferMinDelay
1.3.6.1.4.1.5003.9.10.4.1.9.2.1Unsigned32 (0..500)read-writecurrent
acVideoJitterBufferMaxDelay
OBJECT-TYPE
Jitter buffer maximum delay in milliseconds. Access: Online. AC INI-Param: VideoJitterBufferMaxDelay
1.3.6.1.4.1.5003.9.10.4.1.9.2.2Unsigned32 (0..500)read-writecurrent
acVideoJitterBufferDJBOptimizationFactor
OBJECT-TYPE
JB Optimization Factor controls the jitter buffer's adaptation rates A High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease. Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases. . Access: Online. AC INI-Param: VideoDJBOptimizationFactor
1.3.6.1.4.1.5003.9.10.4.1.9.2.3Unsigned32 (0..10)read-writecurrent
acMediaAggregation
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.10
acMediaAggregationRemoteBaseUDPPort
OBJECT-TYPE
Remote Base UDP Port For Aggrigation. Access: Offline. AC INI-Param: REMOTEBASEUDPPORT
1.3.6.1.4.1.5003.9.10.4.1.10.1Unsigned32 (0..65535)read-writecurrent
acMediaAggregationL1L1ComplexRxUDPPort
OBJECT-TYPE
The UDP port for the incoming (from the remote side) and the outgoing (destination UDP) packets, for Complex Multiplexed RTP mode. Access: Offline. AC INI-Param: L1L1ComplexRxUDPPort
1.3.6.1.4.1.5003.9.10.4.1.10.2Unsigned32 (0..65535)read-writecurrent
acMediaAggregationL1L1ComplexTxUDPPort
OBJECT-TYPE
The Source UDP port for the outgoing UDP Multiplexed RTP packets, for Complex-Multiplex RTP mode. Access: Offline. AC INI-Param: L1L1ComplexTxUDPPort
1.3.6.1.4.1.5003.9.10.4.1.10.3Unsigned32 (0..65535)read-writecurrent
acStreamingCache
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.11
acStreamingCacheSize
OBJECT-TYPE
Sets the streaming cache size in MBs. The remaining size (out of 32MBs) is used as VoicePrompt storage. Access: Offline. AC INI-Param: gStreamingCacheSize
1.3.6.1.4.1.5003.9.10.4.1.11.1Unsigned32 (0..32)read-writecurrent
acStreamingCacheRefreshTime
OBJECT-TYPE
Defines the streaming cache data refresh time in minutes. If -1 is set, refresh is off. Access: Offline. AC INI-Param: gStreamingCacheRefreshTime
1.3.6.1.4.1.5003.9.10.4.1.11.2Integer32 (-1..65535)read-writecurrent
acStreamingCacheClearService
OBJECT-TYPE
reset the streaming cache. Access: Instant. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.11.3Unsigned32 (1..2)read-writecurrent
acMediaVideoConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.12
acMediaVideoConfigEncoderIntraInterval
OBJECT-TYPE
Sets the frequency for the number of frames at which the encoder outputs an Intra frame. Access: Online. AC INI-Param: VideoEncoderIntraInterval
1.3.6.1.4.1.5003.9.10.4.1.12.1Unsigned32 (0..65535)read-writecurrent
acMediaVideoConfigMaxPacketSize
OBJECT-TYPE
Sets the maximum packet size in bytes. Access: Online. AC INI-Param: VideoMaxPacketSize
1.3.6.1.4.1.5003.9.10.4.1.12.2Unsigned32 (1..1400)read-writecurrent
acMediaVideoConfigTargetBitrate
OBJECT-TYPE
Sets the target output bit rate. Access: Online. AC INI-Param: VideoTargetBitrate
1.3.6.1.4.1.5003.9.10.4.1.12.3Unsigned32 (1..384)read-writecurrent
acMediaVideoConfigQualityParameterForRateControl
OBJECT-TYPE
This value determines the trade off between video quality and frame rate. A low value indicates a higher quality with a lower frame rate and vice versa. Access: Online. AC INI-Param: VideoQualityParameterForRateControl
1.3.6.1.4.1.5003.9.10.4.1.12.4Unsigned32 (0..31)read-writecurrent
acMediaVideoConfigRateControlType
OBJECT-TYPE
Sets bitrate output to either a constant or a variable bit rate. CBR (0) Constant Bit Rate. VBR (1) Variable Bit Rate. Target Bitrate indicates the target average output bit rate. . Access: Online. AC INI-Param: VideoRateControlType
1.3.6.1.4.1.5003.9.10.4.1.12.5INTEGER {ceVideoConstantBitRate(0), ceVideoVaribleBitRate(1)}read-writecurrent
acMediaVideoConfigEnableReSyncHeader
OBJECT-TYPE
Indicates whether to add a video packet header to every packet in order to increase error resilience. 0 - Disable 1 - Enable. Access: Online. AC INI-Param: VideoEnableReSyncHeader
1.3.6.1.4.1.5003.9.10.4.1.12.6INTEGER {disable(0), enable(1)}read-writecurrent
acMediaVideoConfigEnableAudioVideoSynchronization
OBJECT-TYPE
Determines whether to enable audio and video synchronization. 0 - No synchronization between audio and video streams 1 - Synchronization between audio and video streams . Access: Online. AC INI-Param: EnableAudioVideoSynchronization
1.3.6.1.4.1.5003.9.10.4.1.12.7INTEGER {disable(0), enable(1)}read-writecurrent
acIPMediaChannels
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.13
acIPMediaChannelsEnable
OBJECT-TYPE
Whether to enable DSP channels reservation for IPmedia support. Relevant for Mediant 1000 board only. One of the following possible 0 = Disable 1 - Enable. Access: Offline. AC INI-Param: EnableIPMediaChannels
1.3.6.1.4.1.5003.9.10.4.1.13.1INTEGER {disable(0), enable(1)}read-writecurrent
acIPMediaChannelsResourcesTable
OBJECT-TYPE
IPMedia channels info
1.3.6.1.4.1.5003.9.10.4.1.13.21not-accessiblecurrent
acIPMediaChannelsResourcesEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.1.13.21.1not-accessiblecurrent
acIPMediaChannelsResourcesIndex
OBJECT-TYPE
Index Field for line. Internal parameter. AC INI-Param: IPMediaChannels_Index
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.1Unsigned32 (0..5)not-accessiblecurrent
acIPMediaChannelsResourcesRowStatus
OBJECT-TYPE
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.2RowStatusread-createcurrent
acIPMediaChannelsResourcesAction
OBJECT-TYPE
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.3INTEGER {none(0)}read-createcurrent
acIPMediaChannelsResourcesActionRes
OBJECT-TYPE
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.4INTEGER {succeeded(0)}read-onlycurrent
acIPMediaChannelsResourcesModuleID
OBJECT-TYPE
Refers to M1K board only, module at which slot. Access: Offline. AC INI-Param: IPMediaChannels_ModuleID
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.5Unsigned32 (0..6)read-createcurrent
acIPMediaChannelsResourcesDSPChannelsReserved
OBJECT-TYPE
How many DSP channels reserve for IPMedia channels. Access: Offline. AC INI-Param: IPMediaChannels_DSPChannelsReserved
1.3.6.1.4.1.5003.9.10.4.1.13.21.1.6Unsigned32 (0..10000)read-createcurrent
acAcousticEchoSuppressor
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.1.14
acAcousticEchoSuppressorEnable
OBJECT-TYPE
Enable support of network echo suppressor on board level. Reduces board resource capacity. Access: Offline. AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT
1.3.6.1.4.1.5003.9.10.4.1.14.1INTEGER {disable(0), enable(1)}read-writecurrent
acAcousticEchoSuppressorEchoCancellerType
OBJECT-TYPE
Echo Canceller type. Line echo canceller for TDM Side or acoustic echo suppressor on network side. Access: Online. AC INI-Param: ECHOCANCELLERTYPE
1.3.6.1.4.1.5003.9.10.4.1.14.2INTEGER {lineEchoCanceller(0), acousticEchoSuppressorNetwork(1)}read-writecurrent
acAcousticEchoSuppressorAttenuationIntensity
OBJECT-TYPE
Acoustic echo suppressor attenuation intensity. intensity of attenuation on signals identified as echo. Access: Online. AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY
1.3.6.1.4.1.5003.9.10.4.1.14.3Unsigned32 (0..3)read-writecurrent
acAcousticEchoSuppressorMaxERLThreshold
OBJECT-TYPE
Acoustic echo suppressor max ERL threshold in DB. Max ratio between signal level and retruned echo from phone. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD
1.3.6.1.4.1.5003.9.10.4.1.14.4Unsigned32 (0..60)read-writecurrent
acAcousticEchoSuppressorMinReferenceDelay
OBJECT-TYPE
Acoustic echo suppressor MIN reference delay in mSec. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS
1.3.6.1.4.1.5003.9.10.4.1.14.5Unsigned32 (0..40)read-writecurrent
acAcousticEchoSuppressorMaxReferenceDelay
OBJECT-TYPE
Acoustic echo suppressor MAX reference delay. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS
1.3.6.1.4.1.5003.9.10.4.1.14.6Unsigned32 (0..40)read-writecurrent
acMediaStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.2
acIPLegs
OBJECT-IDENTITY
1.3.6.1.4.1.5003.9.10.4.2.1
acIPLegsTable
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.2.1.1not-accessiblecurrent
acIPLegsEntry
OBJECT-TYPE
1.3.6.1.4.1.5003.9.10.4.2.1.1.1not-accessiblecurrent
acIPLegsLegIndex
OBJECT-TYPE
Describes Rtp Endpoint In A Specific Call. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.1Unsigned32 (0..5000)not-accessiblecurrent
acIPLegsCallIndex
OBJECT-TYPE
Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.2Unsigned32 (0..5000)read-onlycurrent
acIPLegsRTPActive
OBJECT-TYPE
Decribes whether the RTP is active or not. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.3INTEGER {disable(0), enable(1)}read-onlycurrent
acIPLegsCoderType
OBJECT-TYPE
describes the coder Type. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.4INTEGER {acG711Alaw-64(0), acG711Mulaw(1), acG726-16(2), acG726-24(3), acG726-32(4), acG726-40(5), acG727-16(6), acG727-24-16(7), acG727-24(8), acG727-32-16(9), acG727-32-24(10), acG727-32(11), acG727-40-16(12), acG727-40-24(13), acG727-40-32(14), acG723Low(15), acG723High(16), acG729(17), acGSM610(18), vacGSM610MS(20), acGSM-EFR(21), acTransparent(22), acG728(23), acNetCoder-4-8(25), acNetCoder-5-6(26), acNetCoder-6-4(27), acNetCoder-7-2(28), acNetCoder-8(29), acNetCoder-8-8(30), acNetCoder-9(31), acEVRC(32), acEVRC-TFO(33), acQCELP-8(34), acQCELP-8-TFO(35), acQCELP-13(36), acQCELP-13-TFO(37), acEVRC-TTY(38), acNoCoder(40), acModemAnswer(41), acModemCall(42), acVoxADPCM(43), acG711Alaw-5-5(45), acG711Mulaw-5-5(46), acG726-32-5-5(47), acG729E(48), acLinearPCM(49), acAMR-4-7(50), acAMR-5-15(51), acAMR-5-9(52), acAMR-6-7(53), acAMR-7-4(54), acAMR-7-95(55), acAMR-10-2(56), acAMR-12-2(57), acEVRC-B(58), acEVRC-TFOV(60), acQCELP-8-TFOV(61), acQCELP-13-TFOV(62), acILBC-15(63), acILBC-13(64), acBV-16(65), acAMRWB-6-6(66), acAMRWB-8-85(67), acAMRWB-12-65(68), acAMRWB-14-25(69), acAMRWB-15-85(70), acAMRWB-18-25(71), acAMRWB-19-85(72), acAMRWB-23-05(73), acAMRWB-23-85(74), acG722-48K(75), acG722-56K(76), acG722-64K(77), acDPNSSCoder(78), acEG711Alaw-10ms(80), acEG711Alaw-20ms(81), acEG711Alaw-30ms(82), acEG711Mulaw-10ms(83), acEG711Mulaw-20ms(84), acEG711Mulaw-30ms(85)}read-onlycurrent
acIPLegsSilenceCompression
OBJECT-TYPE
Enables or Disables the Silence Compression. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.5INTEGER {disable(0), enable(1)}read-onlycurrent
acIPLegsDTMFDetection
OBJECT-TYPE
Enables or Disables the DTMF Detection. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.6INTEGER {disable(0), enable(1)}read-onlycurrent
acIPLegsLocalRTPPort
OBJECT-TYPE
Describes the RTP port of the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.7Unsigned32 (0..20000)read-onlycurrent
acIPLegsRemoteRTPAddress
OBJECT-TYPE
Describes the RTP address. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.8IpAddressread-onlycurrent
acIPLegsFaxTransportType
OBJECT-TYPE
Describes the Fax transfor Type currently working. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.9INTEGER {transparent(0), relay(1), bypass(2), withevents(3)}read-onlycurrent
acIPLegsRxPackets
OBJECT-TYPE
Describes the received packets on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.10Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsTxPackets
OBJECT-TYPE
Describes the Transmitted packets on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.11Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsRxBytes
OBJECT-TYPE
Describes the received Bytes on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.12Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsTxBytes
OBJECT-TYPE
Describes the Transmitted packets on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.13Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsJitter
OBJECT-TYPE
Describes the Jitter on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.14Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsPacketLoss
OBJECT-TYPE
Describes the Lost packets on the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.15Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsSSRCOfSender
OBJECT-TYPE
Describes the SSRC Of the Sender. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.16Unsigned32 (0..2147483647)read-onlycurrent
acIPLegsDSPDevice
OBJECT-TYPE
Describes the DSP Device Of the Leg. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.17Unsigned32 (0..2000)read-onlycurrent
acIPLegsLegName
OBJECT-TYPE
Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A
1.3.6.1.4.1.5003.9.10.4.2.1.1.1.18SnmpAdminString (SIZE(0..64))read-onlycurrent