A3COM51-SS9000SX
- Registered at
- 1.3.6.1.4.1.43.11.3.6.1.4.1.43.271.3.6.1.4.1.1916
- Namespace
- 3com
- Source file
A3COM51-SS9000SX- Digest
sha256:d939aaf61191790817a53bbb7d6c3f369aa235586d2db9b6a597cb580ec538b9
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysDescr, sysUpTime |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM51-SS9000SX SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1916.0 | extremeV1Traps | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.1 | extremeAgent | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.2 | extremeProduct | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.3 | extremeMisc | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.4 | extremeV2Traps | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.43.1.1 | terminalServer | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.2 | dedicatedBridgeServer | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.3 | dedicatedRouteServer | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.4 | brouter | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.5 | genericMSWorkstation | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.6 | genericMSServer | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.7 | genericUnixServer | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.8 | hub | |
| 1.3.6.1.4.1.43.1.9 | cards | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.10 | chipSets | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.11 | oem | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.12 | atm | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.13 | powerSupplies | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.14 | tdm | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.15 | cableModems | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.16 | switches | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.17 | voice | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.18 | intranetAppliances | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.19 | xDSL | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.20 | wirelessDevices | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.21 | networkJacks | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.22 | securitySwitches | A3Com-products-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| a3Com OBJECT-IDENTITY | 1.3.6.1.4.1.43 | |||
| products OBJECT-IDENTITY | 1.3.6.1.4.1.43.1 | |||
| hub OBJECT-IDENTITY | 1.3.6.1.4.1.43.1.8 | |||
| superStackSwitch9000SX OBJECT-IDENTITY | 1.3.6.1.4.1.43.1.8.32 | |||
| superStackSwitch3800 OBJECT-IDENTITY | 1.3.6.1.4.1.43.1.8.34 | |||
| superStackSwitch9100 OBJECT-IDENTITY | 1.3.6.1.4.1.43.1.8.36 | |||
| superStackSwitch9000SX_mib OBJECT-IDENTITY | 1.3.6.1.4.1.43.27 | |||
| ss9000UnitPaceMode OBJECT-TYPE This object specifies the type of backoff algorithm. Any port can use the standard ethernet algorithm or, for PACE applications, it can be set into low latency mode. In this mode, the backoff algorithm is optimized to minimize the possibility of collisions. PACE mode can be set for the whole unit only. | 1.3.6.1.4.1.43.27.1 | INTEGER {notApplicable(1), normalEthernet(2), lowLatency(3)} | read-write | mandatory |
| ss9000PortTable OBJECT-TYPE The port management table. | 1.3.6.1.4.1.43.27.2 | not-accessible | mandatory | |
| ss9000PortTableEntry OBJECT-TYPE This table contains pairs of 32-bit counters which map to RMON 2 64-bit counters | 1.3.6.1.4.1.43.27.2.1 | not-accessible | mandatory | |
| ss9000PortIndex OBJECT-TYPE The index of this table entry. | 1.3.6.1.4.1.43.27.2.1.1 | INTEGER | read-only | mandatory |
| ss9000PortRxPktCtLow OBJECT-TYPE The lower 32 bits of the 64 bit receive packet counter for this port | 1.3.6.1.4.1.43.27.2.1.2 | Counter | read-only | mandatory |
| ss9000PortRxPktCtHigh OBJECT-TYPE The upper 32 bits of the 64 bit receive packet counter for this port | 1.3.6.1.4.1.43.27.2.1.3 | Counter | read-only | mandatory |
| ss9000PortRxByteCtLow OBJECT-TYPE The lower 32 bits of the 64 bit receive byte counter for this port | 1.3.6.1.4.1.43.27.2.1.4 | Counter | read-only | mandatory |
| ss9000PortRxByteCtHigh OBJECT-TYPE The upper 32 bits of the 64 bit receive byte counter for this port | 1.3.6.1.4.1.43.27.2.1.5 | Counter | read-only | mandatory |
| ss9000PortTxPktCtLow OBJECT-TYPE The lower 32 bits of the 64 bit transmit packet counter for this port | 1.3.6.1.4.1.43.27.2.1.6 | Counter | read-only | mandatory |
| ss9000PortTxPktCtHigh OBJECT-TYPE The upper 32 bits of the 64 bit transmit packet counter for this port | 1.3.6.1.4.1.43.27.2.1.7 | Counter | read-only | mandatory |
| ss9000PortTxByteCtLow OBJECT-TYPE The lower 32 bits of the 64 bit transmit byte counter for this port | 1.3.6.1.4.1.43.27.2.1.8 | Counter | read-only | mandatory |
| ss9000PortTxByteCtHigh OBJECT-TYPE The upper 32 bits of the 64 bit transmit byte counter for this port | 1.3.6.1.4.1.43.27.2.1.9 | Counter | read-only | mandatory |
| ss9000SaveConfiguration OBJECT-TYPE When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the ss9000SaveStatus object to determine when the asynchronous save operation has completed. | 1.3.6.1.4.1.43.27.3 | INTEGER {saveToPrimary(1), saveToSecondary(2)} | write-only | mandatory |
| ss9000SaveStatus OBJECT-TYPE This object will return the status of a save operation invoked by setting the ss9000SaveConfiguration object. A network management application can read this object to determine that a save operation has completed. | 1.3.6.1.4.1.43.27.4 | INTEGER {saveInProgress(1), saveNotInProgress(2)} | read-only | mandatory |
| ss9000MauType OBJECT-IDENTITY | 1.3.6.1.4.1.43.27.5 | |||
| ss9000MauType1000BaseSX OBJECT-IDENTITY | 1.3.6.1.4.1.43.27.5.1 | |||
| extreme OBJECT-IDENTITY | 1.3.6.1.4.1.1916 |
Notifications
| Name | OID | Status |
|---|---|---|
| overheat NOTIFICATION-TYPE A overheat trap indicates that the on board tempature sensor has reported a overheat condition. System will shutdown until unit has suficiently cooled such that operation may begin again. A cold start trap will be issued when the unit has come back on line. | 1.3.6.1.4.1.1916.0.1 | |
| fanfailed NOTIFICATION-TYPE A fan failed trap indicates one or more of the cooling fans inside the device has failed. A fanOK trap will be sent once the fan has attained normal operation. | 1.3.6.1.4.1.1916.0.2 | |
| fanOK NOTIFICATION-TYPE A fan has tansitioned out of a failure state and is now operating correctly. | 1.3.6.1.4.1.1916.0.3 | |
| invalidLoginAttempt NOTIFICATION-TYPE A user attempted to login to console or by telnet but was refused access due to incorrect username or password | 1.3.6.1.4.1.1916.0.4 |