A3COM0039-GENERIC-BRIDGE

Registered at: 1.3.6.1.4.1.43.10.18.1

1.3.6.1.4.1.43.10.18.2

1.3.6.1.4.1.43.10.18.4

1.3.6.1.4.1.43.10.18.5
Namespace: 3com
Source file: A3COM0039-GENERIC-BRIDGE
Digest: sha256:c258c200cac9607d13e16da3b1ebd6a8c3c97367f64f6522687e6b7f9f67a2a1

Imports

From	Symbols
A3COM0004-GENERIC	`bridgeMgmt`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM0004-GENERIC
A3COM0039-GENERIC-BRIDGE
A3Com-products-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

Name	OID	Syntax	Access	Status
brControlPackage OBJECT-IDENTITY	1.3.6.1.4.1.43.10.18.1
brClearCounters OBJECT-TYPE Clears all the counters associated with the bridgeing function for all bridge ports. A read will always return a value of no-action(1), a write of no-acti on(1) will have no effect, while a write of clear(2) will clear all the counters.	1.3.6.1.4.1.43.10.18.1.1	INTEGER {no-action(1), clear(2)}	read-write	mandatory
brSTAPMode OBJECT-TYPE Determines whether the STAP algorithm is on or off. The value on(2) provides STAP per Vlan while the value single(3) provides a single STAP domain which runs under the Vlans.	1.3.6.1.4.1.43.10.18.1.2	INTEGER {off(1), on(2), single(3)}	read-write	mandatory
brLearnMode OBJECT-TYPE Determines whether the bridge is not learning addresses (off), or learning addresses as permanent, deleteOnReset or deleteOnTimeout.	1.3.6.1.4.1.43.10.18.1.3	INTEGER {off(1), on(2)}	read-write	mandatory
brAgingMode OBJECT-TYPE Determines whether the bridge will age out entries in its filtering database or not.	1.3.6.1.4.1.43.10.18.1.7	INTEGER {on(1), off(2)}	read-write	mandatory
brMonitorPackage OBJECT-IDENTITY	1.3.6.1.4.1.43.10.18.2
brDataBase OBJECT-IDENTITY	1.3.6.1.4.1.43.10.18.4
brDummyPackage OBJECT-IDENTITY	1.3.6.1.4.1.43.10.18.5
brDatabaseType OBJECT-TYPE This dummy object enables the database full trap to differentiate between the filtering database, the permanent database and the ATM CAM.	1.3.6.1.4.1.43.10.18.5.1	INTEGER {filtering(1), permanent(2), atmCam(3)}	read-only	mandatory
brDatabaseLevel OBJECT-TYPE This dummy object enables the database full trap to differentiate between the database being 90% and 100% full.	1.3.6.1.4.1.43.10.18.5.2	INTEGER {ninetyPercent(90), oneHundredPercent(100)}	read-only	mandatory