A3COM0012-TRAPTABLE2
- Registered at
- 1.3.6.1.4.1.43.10.10.21.3.6.1.4.1.43.10.10.3
- Namespace
- 3com
- Source file
A3COM0012-TRAPTABLE2- Digest
sha256:f3c672d79cc54ea839cebfbe5d100c41a488d6804448fbd27be6395fff195651
Imports
| From | Symbols |
|---|---|
| A3COM0004-GENERIC | localSnmp |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM0004-GENERIC A3COM0012-TRAPTABLE2 A3Com-products-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| snmpTrapTable OBJECT-TYPE This table can store the destination addresses of SNMP managers that wish to receive traps from this device. | 1.3.6.1.4.1.43.10.10.2 | not-accessible | mandatory | |
| snmpTrapEntry OBJECT-TYPE This table can store the destination addresses of SNMP managers that wish to receive traps from this device. | 1.3.6.1.4.1.43.10.10.2.1 | not-accessible | mandatory | |
| snmpTrapIndex OBJECT-TYPE This is the unique identifier for this row in the snmpTrapTable. When creating a new row, a manager can read the value of the snmpTrapNextFreeIndex object and (if non-zero) can use this value as the index of the new row to be created. The actual number of rows that can be created on any particular device depends on the memory and processing resources available at the time. | 1.3.6.1.4.1.43.10.10.2.1.1 | INTEGER (1..255) | read-only | mandatory |
| snmpTrapDestination OBJECT-TYPE This DisplayString is the network address of the device to which SNMP traps will be sent. This is an IP or IPX address. The following formats can be used. IP nnn.nnn.nnn.nnn - dotted format IPX AABBCCDD:AABBCCDDEEFF - network : node Destination addresses must be unique within this table. An error is returned if an attempt is made to add a duplicate address. | 1.3.6.1.4.1.43.10.10.2.1.2 | DisplayString (SIZE(0..50)) | read-write | mandatory |
| snmpTrapProtocol OBJECT-TYPE This defines the transport protocol to use when sending an SNMP trap. At present, this value is determined by the format/value of snmpTrapDestionation which is currently un-ambiguous and so this object is read-only. | 1.3.6.1.4.1.43.10.10.2.1.3 | INTEGER {unknown(1), ip(2), ipx(3)} | read-only | mandatory |
| snmpTrapCommunity OBJECT-TYPE SNMP Community String to be used when sending Traps to this destination. | 1.3.6.1.4.1.43.10.10.2.1.4 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| snmpTrapCategory OBJECT-TYPE 32 Bit Mask indicating which Trap categories that the snmpTrapDestination is interested in. '00000001'h - High Priority Configuration Traps '00000002'h - Low Priority Configuration Traps '00000004'h - High Priority Security Traps '00000008'h - Low Priority Security Traps '00000010'h - Alarms & Polling Traps '00000020'h - Regular Heartbeat Traps '00000040'h - End Station Table Traps '00000080'h - reserved '00000100'h - Physical Entity Traps '00000200'h - Facility Traps '00000400'h - Service Related Traps A value of 0xFFFFFFFF enables all traps. | 1.3.6.1.4.1.43.10.10.2.1.5 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| snmpTrapThrottle OBJECT-TYPE The maximum rate at which that snmpTrapDestination is willing to receive traps, specified as the minimum interval in milliseconds between traps. For example, a value of 2000 will limit traps sent to this destination to one trap every 2 seconds. A value of zero indicates that no trap throttling is required. | 1.3.6.1.4.1.43.10.10.2.1.6 | INTEGER (0..99999) | read-write | mandatory |
| snmpTrapRowStatus OBJECT-TYPE The SNMPv2 RowStatus convention. Notes: Because this is such a simple table:- 1) Writing any data to a destroyed row, changes its state to active. 2) There is no notReady or notInService state. Each row is either active or destroyed. | 1.3.6.1.4.1.43.10.10.2.1.7 | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)} | read-write | mandatory |
| snmpTrapNextFreeIndex OBJECT-TYPE Indicates the the next value of snmpTrapIndex which can be used to create a new trap destination entry. This value is zero if there are no free rows in the table. | 1.3.6.1.4.1.43.10.10.3 | INTEGER (0..255) | read-only | mandatory |