MIBs Depot

A3COM-HUAWEI-TUNNEL-MIB

Registered at
1.3.6.1.4.1.43.45.1.10.2.53
Last updated
2005-06-04 00:00
Organization
Huawei 3Com Technologies Co., Ltd.
Revisions
2005-06-04 00:00
Namespace
3com
Source file
A3COM-HUAWEI-TUNNEL-MIB
Digest
sha256:44895ced9d9edd64b4812826793a9e578f43f880a33452be3db2d1527e0f07a7

Description

This MIB contains objects to Manage configuration and Monitor tunnel.

Contact

Platform Team Huawei 3Com Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085

Imports

FromSymbols
A3COM-HUAWEI-OID-MIBh3cCommon
IF-MIBInterfaceIndexOrZero, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM-HUAWEI-OID-MIB
A3COM-HUAWEI-TUNNEL-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-FLOW-LABEL-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
H3cTunnelType
TEXTUAL-CONVENTION
Tunnel type defination.
current

Objects

NameOIDSyntaxAccessStatus
h3cTunnelMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.53.1
h3cTunnelTables
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.53.1.1
h3cTunnelIfTable
OBJECT-TYPE
The (conceptual) table containing information on configured tunnels.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1not-accessiblecurrent
h3cTunnelIfEntry
OBJECT-TYPE
An entry (conceptual row) containing the information on a particular configured tunnel.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1not-accessiblecurrent
h3cTunnelIfEncapsMethod
OBJECT-TYPE
The encapsulation method used by the tunnel.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.3H3cTunnelTyperead-writecurrent
h3cTunnelIfHopLimit
OBJECT-TYPE
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.4Integer32 (0 | 1..255)read-onlycurrent
h3cTunnelIfSecurity
OBJECT-TYPE
The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related information may be available in a MIB module for the security protocol in use.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.5INTEGER {none(1), ipsec(2), other(3)}read-onlycurrent
h3cTunnelIfTOS
OBJECT-TYPE
The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value of -2 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB module. A value between 0 and 63 inclusive indicates that the bit field is set to the indicated value.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.6Integer32 (-2..63)read-onlycurrent
h3cTunnelIfFlowLabel
OBJECT-TYPE
The method used to set the IPv6 Flow Label value. This object need not be present in rows where h3cTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.7IPv6FlowLabelOrAnyread-onlycurrent
h3cTunnelIfAddressType
OBJECT-TYPE
The type of address in the corresponding h3cTunnelIfLocalInetAddress and h3cTunnelIfRemoteInetAddress objects.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.8InetAddressTyperead-writecurrent
h3cTunnelIfLocalInetAddress
OBJECT-TYPE
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by h3cTunnelIfAddressType.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.9InetAddressread-writecurrent
h3cTunnelIfRemoteInetAddress
OBJECT-TYPE
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the value is 0.0.0.0 for tunnels over IPv4 or :: for tunnels over IPv6. The type of this object is given by h3cTunnelIfAddressType.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.10InetAddressread-writecurrent
h3cTunnelIfEncapsLimit
OBJECT-TYPE
The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size).
1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.11Integer32 (-1 | 0..255)read-onlycurrent
h3cTunnelInetConfigTable
OBJECT-TYPE
The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the h3cTunnelIfTable with a fixed destination address should have a corresponding row in the h3cTunnelInetConfigTable, regardless of whether it was created via SNMP.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3not-accessiblecurrent
h3cTunnelInetConfigEntry
OBJECT-TYPE
An entry (conceptual row) containing the information on a particular configured tunnel.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1not-accessiblecurrent
h3cTunnelInetConfigSlot
OBJECT-TYPE
Slot number. h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot and h3cTunnelInetConfigTunnNum descirbe a tunnel interface. For Example, interface tunnel 0/0/25 would be configured as: h3cTunnelInetConfigSlot 0 h3cTunnelInetConfigSubSlot 0 h3cTunnelInetConfigTunnNum 25
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.1Integer32 (0..255)not-accessiblecurrent
h3cTunnelInetConfigSubSlot
OBJECT-TYPE
Sub slot number. As described in h3cTunnelInetConfigSlot's description.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.2Integer32 (0..255)not-accessiblecurrent
h3cTunnelInetConfigTunnNum
OBJECT-TYPE
Tunnel number. As described in h3cTunnelInetConfigSlot's description.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.3Integer32 (0..65535)not-accessiblecurrent
h3cTunnelInetConfigIfIndex
OBJECT-TYPE
If the value of h3cTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.6InterfaceIndexOrZeroread-onlycurrent
h3cTunnelInetConfigStatus
OBJECT-TYPE
The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the h3cTunnelIfTable may be modified while this row is active. To create a row in this table, the management station should set h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot, h3cTunnelInetConfigTunnNum, and set h3cTunnelInetConfigStatus to createAndGo. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the h3cTunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the h3cTunnelIfTable.
1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.7RowStatusread-createcurrent