MIBs Depot

A3COM-HUAWEI-NQA-MIB

Registered at
1.3.6.1.4.1.43.45.1.5.25.28
Last updated
2006-08-14 00:00
Organization
Huawei Technologies Co., Ltd.
Namespace
3com
Source file
A3COM-HUAWEI-NQA-MIB
Digest
sha256:85f7c64c54d55b2e0f1574340aee1d596f65f4d1398616eb51b33ace1c0fae43

Description

The private mib file includes the test information of the device. It is supplementary for rfc2925.txt.

Contact

R&D BeiJing, Huawei Technologies Co., Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com

Imports

FromSymbols
A3COM-HUAWEI-OID-MIBhuaweiDatacomm
DISMAN-PING-MIBpingCtlDescr, pingCtlEntry, pingCtlOwnerIndex, pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlTestName, pingCtlType
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM-HUAWEI-NQA-MIB
A3COM-HUAWEI-OID-MIB
DISMAN-PING-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwNqaObjects
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.5.25.28.1
hwNqaMIBVersion
OBJECT-TYPE
Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'
1.3.6.1.4.1.43.45.1.5.25.28.1.1DisplayStringread-onlycurrent
hwNqaCtlTable
OBJECT-TYPE
Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
1.3.6.1.4.1.43.45.1.5.25.28.1.2not-accessiblecurrent
hwNqaCtlEntry
OBJECT-TYPE
Defines an entry in the hwNqaCtlTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1not-accessiblecurrent
hwNqaCtlTargetPort
OBJECT-TYPE
The destination port that may be used by udpEcho, tcpConnect and jitter probes.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.1Integer32 (0..65536)read-createcurrent
hwNqaCtlSourcePort
OBJECT-TYPE
The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.2Integer32 (0..65536)read-createcurrent
hwNqaCtlTTL
OBJECT-TYPE
Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.3Integer32read-createcurrent
hwNqaCtlJitterAdminInterval
OBJECT-TYPE
Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.4Integer32 (0..60000)read-createcurrent
hwNqaCtlJitterAdminNumPackets
OBJECT-TYPE
Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.5Integer32read-createcurrent
hwNqaCtlHttpOperationType
OBJECT-TYPE
Http operation type: get or post.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.6INTEGER {get(1), post(2)}read-createcurrent
hwNqaCtlHttpOperationString
OBJECT-TYPE
Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.7DisplayString (SIZE(0..255))read-createcurrent
hwNqaCtlFtpOperationType
OBJECT-TYPE
Ftp operation type.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.8INTEGER {get(1), put(2)}read-createcurrent
hwNqaCtlFtpUsername
OBJECT-TYPE
Ftp username.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.9DisplayString (SIZE(0..32))read-createcurrent
hwNqaCtlFtpPassword
OBJECT-TYPE
Ftp password.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.10DisplayString (SIZE(0..32))read-createcurrent
hwNqaCtlFtpOperationString
OBJECT-TYPE
Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.11DisplayString (SIZE(0..255))read-createcurrent
hwNqaCtlVPNInstance
OBJECT-TYPE
VPN name by which system finds route in the specified VPN to send NQA probe packets.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.12DisplayString (SIZE(0..255))read-createcurrent
hwNqaCtlHistoryKeptTime
OBJECT-TYPE
To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.13Integer32 (1..1440)read-createcurrent
hwNqaCtlHistoryEnable
OBJECT-TYPE
To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
hwNqaCtlICPIFAdvFactor
OBJECT-TYPE
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.15Integer32read-createcurrent
hwNqaCtlCodecType
OBJECT-TYPE
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.16INTEGER {notDefined(1), g711Alaw(2), g711Ulaw(3), g729A(4), icmpTimestamp(5)}read-createcurrent
hwNqaResultsTable
OBJECT-TYPE
Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hwNqaResultsTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.3not-accessiblecurrent
hwNqaResultsEntry
OBJECT-TYPE
The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1not-accessiblecurrent
hwNqaResultsRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.1Unsigned32read-onlycurrent
hwNqaResultsRttTimeouts
OBJECT-TYPE
The number of times that a NQA probe failed because the probe timed out.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.2Unsigned32read-onlycurrent
hwNqaResultsRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.3Unsigned32read-onlycurrent
hwNqaResultsRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.4Unsigned32read-onlycurrent
hwNqaResultsRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.5Unsigned32read-onlycurrent
hwNqaResultsRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.6Unsigned32read-onlycurrent
hwNqaResultsRttStatsErrors
OBJECT-TYPE
The number of some other errors.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.7Unsigned32read-onlycurrent
hwNqaResultsMaxDelaySD
OBJECT-TYPE
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.8Unsigned32read-onlycurrent
hwNqaResultsMaxDelayDS
OBJECT-TYPE
The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.9Unsigned32read-onlycurrent
hwNqaResultsLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.10Unsigned32read-onlycurrent
hwNqaResultsPacketLateArrival
OBJECT-TYPE
The value of this object indicates the number of the packets that arrived after the timeout.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.11Unsigned32read-onlycurrent
hwNqaResultsRttSum
OBJECT-TYPE
The sum of round trip time.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.12Unsigned32read-onlycurrent
hwNqaResultsNumOfDelaySD
OBJECT-TYPE
The number of delay from source to destination that are successfully measured.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.13Unsigned32read-onlycurrent
hwNqaResultsMinDelaySD
OBJECT-TYPE
The minimum of all one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.14Unsigned32read-onlycurrent
hwNqaResultsSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.15Unsigned32read-onlycurrent
hwNqaResultsSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.16Unsigned32read-onlycurrent
hwNqaResultsNumOfDelayDS
OBJECT-TYPE
The number of delay from destination to source that are successfully measured.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.17Unsigned32read-onlycurrent
hwNqaResultsMinDelayDS
OBJECT-TYPE
The minimum of all one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.18Unsigned32read-onlycurrent
hwNqaResultsSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.19Unsigned32read-onlycurrent
hwNqaResultsSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.20Unsigned32read-onlycurrent
hwNqaJitterStatsTable
OBJECT-TYPE
Statistics table for latest jitter activity.
1.3.6.1.4.1.43.45.1.5.25.28.1.4not-accessiblecurrent
hwNqaJitterStatsEntry
OBJECT-TYPE
An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1not-accessiblecurrent
hwNqaJitterStatsNumOfRTT
OBJECT-TYPE
The number of received destination device responses with which jitter test can reach round-trip time.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.1Counter32read-onlycurrent
hwNqaJitterStatsMinOfPositivesSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.2Gauge32read-onlycurrent
hwNqaJitterStatsMaxOfPositivesSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.3Gauge32read-onlycurrent
hwNqaJitterStatsNumOfPositivesSD
OBJECT-TYPE
The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.4Gauge32read-onlycurrent
hwNqaJitterStatsSumOfPositivesSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.5Gauge32read-onlycurrent
hwNqaJitterStatsSum2PositivesSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.6Gauge32read-onlycurrent
hwNqaJitterStatsMinOfNegativesSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.7Gauge32read-onlycurrent
hwNqaJitterStatsMaxOfNegativesSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.8Gauge32read-onlycurrent
hwNqaJitterStatsNumOfNegativesSD
OBJECT-TYPE
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.9Gauge32read-onlycurrent
hwNqaJitterStatsSumOfNegativesSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.10Gauge32read-onlycurrent
hwNqaJitterStatsSum2NegativesSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.11Gauge32read-onlycurrent
hwNqaJitterStatsMinOfPositivesDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.12Gauge32read-onlycurrent
hwNqaJitterStatsMaxOfPositivesDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.13Gauge32read-onlycurrent
hwNqaJitterStatsNumOfPositivesDS
OBJECT-TYPE
The number that records positive jitter times from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.14Gauge32read-onlycurrent
hwNqaJitterStatsSumOfPositivesDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.15Gauge32read-onlycurrent
hwNqaJitterStatsSum2PositivesDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.16Gauge32read-onlycurrent
hwNqaJitterStatsMinOfNegativesDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.17Gauge32read-onlycurrent
hwNqaJitterStatsMaxOfNegativesDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.18Gauge32read-onlycurrent
hwNqaJitterStatsNumOfNegativesDS
OBJECT-TYPE
The number that records negative jitter times from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.19Gauge32read-onlycurrent
hwNqaJitterStatsSumOfNegativesDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.20Gauge32read-onlycurrent
hwNqaJitterStatsSum2NegativesDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.21Gauge32read-onlycurrent
hwNqaJitterStatsPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.22Gauge32read-onlycurrent
hwNqaJitterStatsPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.23Gauge32read-onlycurrent
hwNqaJitterStatsAvePositivesSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.24Gauge32read-onlycurrent
hwNqaJitterStatsAveNegativesSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.25Gauge32read-onlycurrent
hwNqaJitterStatsAvePositivesDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.26Gauge32read-onlycurrent
hwNqaJitterStatsAveNegativesDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.27Gauge32read-onlycurrent
hwNqaJitterStatsPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.28Gauge32read-onlycurrent
hwNqaJitterStatsOperOfICPIF
OBJECT-TYPE
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.29Gauge32read-onlycurrent
hwNqaJitterStatsOperOfMOS
OBJECT-TYPE
The MOS (Mean Opinion Score) value for the latest jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.30Gauge32read-onlycurrent
hwNqaAgentEnable
OBJECT-TYPE
Enable NQA agent function.
1.3.6.1.4.1.43.45.1.5.25.28.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hwNqaTcpServerTable
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information.
1.3.6.1.4.1.43.45.1.5.25.28.1.6not-accessiblecurrent
hwNqaTcpServerEntry
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
1.3.6.1.4.1.43.45.1.5.25.28.1.6.1not-accessiblecurrent
hwNqaTcpServerIpAddress
OBJECT-TYPE
Tcp server's ip address.
1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.1InetAddressnot-accessiblecurrent
hwNqaTcpServerPort
OBJECT-TYPE
Tcp server's port number.
1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.2Integer32 (0..65536)not-accessiblecurrent
hwNqaTcpServerRowStatus
OBJECT-TYPE
hwNqaTcpServerIpAddress and hwNqaTcpServerPort must be set during a creation operation.
1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.3RowStatusread-createcurrent
hwNqaUdpServerTable
OBJECT-TYPE
Status of NQA udp server configuration information.
1.3.6.1.4.1.43.45.1.5.25.28.1.7not-accessiblecurrent
hwNqaUdpServerEntry
OBJECT-TYPE
This entry includes not only the udp server ip address but also the udp server udp port.
1.3.6.1.4.1.43.45.1.5.25.28.1.7.1not-accessiblecurrent
hwNqaUdpServerIpAddress
OBJECT-TYPE
Udp server's ip address.
1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.1InetAddressnot-accessiblecurrent
hwNqaUdpServerPort
OBJECT-TYPE
Udp server's port number.
1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.2Integer32 (0..65536)not-accessiblecurrent
hwNqaUdpServerRowStatus
OBJECT-TYPE
hwNqaUdpServerIpAddress and hwNqaUdpServerPort must be set during a creation operation.
1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.3RowStatusread-createcurrent
hwNqaServerEnable
OBJECT-TYPE
Enable NQA server function.
1.3.6.1.4.1.43.45.1.5.25.28.1.8INTEGER {enable(1), disable(2)}read-writecurrent
hwNqaStatsMaxGroupNumber
OBJECT-TYPE
The maximum number saved per group. The maximum value of hwNqaCtlStatisticsGroupNumber can not exceed the value of this object.
1.3.6.1.4.1.43.45.1.5.25.28.1.9Integer32read-onlycurrent
hwNqaStatisticsCtlTable
OBJECT-TYPE
Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hwNqaStatisticsResultsTable and the hwNqaGroupStatsJitterTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.10not-accessiblecurrent
hwNqaStatisticsCtlEntry
OBJECT-TYPE
Defines an entry in the hwNqaStatisticsCtlTable. The hwNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hwNqaStatisticsCtlTable to correspond to the pingCtlEntry.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1not-accessiblecurrent
hwNqaCtlStatisticsInterval
OBJECT-TYPE
Statistic information will be calculated after the time that is the value of hwNqaCtlStatisticsInterval.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.1Unsigned32read-createcurrent
hwNqaCtlStatisticsGroupNumber
OBJECT-TYPE
The value of this object indicates the number of group saved. The length of this object is from 1 to hwNqaStatsMaxGroupNumber.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.2Unsigned32read-createcurrent
hwNqaCtlStatisticsKeptTime
OBJECT-TYPE
To indicate how long the statistic information will be saved after the test stops.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.3Unsigned32 (1..1440)read-createcurrent
hwNqaCtlBeginTime
OBJECT-TYPE
Time at which the type-specified test will start.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.4DateAndTimeread-createcurrent
hwNqaCtlLifeTime
OBJECT-TYPE
To indicate how long the type-specified test will last.
1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.5Unsigned32read-createcurrent
hwNqaStatisticsResultsTable
OBJECT-TYPE
Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hwNqaStatisticsResultsTable. The statistic cycle is the value of hwNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (HwNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.43.45.1.5.25.28.1.11not-accessiblecurrent
hwNqaStatisticsResultsEntry
OBJECT-TYPE
Defines an entry in the hwNqaStatisticsResultsTable. The hwNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hwNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1not-accessiblecurrent
hwNqaStatResIndex
OBJECT-TYPE
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hwNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
hwNqaStatResIpTargetAddressType
OBJECT-TYPE
This object indicates the type of address stored in the corresponding hwNqaStatResIpTargetAddress object.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.2InetAddressTyperead-onlycurrent
hwNqaStatResIpTargetAddress
OBJECT-TYPE
This object represent the host address to be used at a remote host for performing a network analysis operation.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.3InetAddressread-onlycurrent
hwNqaStatResMinRtt
OBJECT-TYPE
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.4Gauge32read-onlycurrent
hwNqaStatResMaxRtt
OBJECT-TYPE
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.5Gauge32read-onlycurrent
hwNqaStatResAverageRtt
OBJECT-TYPE
The average NQA probe round-trip-time (RTT).
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.6Gauge32read-onlycurrent
hwNqaStatResProbeResponses
OBJECT-TYPE
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.7Counter32read-onlycurrent
hwNqaStatResSentProbes
OBJECT-TYPE
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.8Counter32read-onlycurrent
hwNqaStatResRttSumOfSquares
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.9Counter32read-onlycurrent
hwNqaStatResStartTime
OBJECT-TYPE
This object contains the start time of the statistic.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.10DateAndTimeread-onlycurrent
hwNqaStatResInterval
OBJECT-TYPE
This object contains the interval between two times of statistic.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.11Gauge32read-onlycurrent
hwNqaStatResRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.12Counter32read-onlycurrent
hwNqaStatResRttTimeouts
OBJECT-TYPE
The number of times that a probe failed because the probe timed out.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.13Counter32read-onlycurrent
hwNqaStatResRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because errors related to sockets.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.14Counter32read-onlycurrent
hwNqaStatResRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.15Counter32read-onlycurrent
hwNqaStatResRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.16Counter32read-onlycurrent
hwNqaStatResRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.17Counter32read-onlycurrent
hwNqaStatResRttErrors
OBJECT-TYPE
The number of other errors.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.18Counter32read-onlycurrent
hwNqaStatResLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.19Gauge32read-onlycurrent
hwNqaStatResPacketLateArrival
OBJECT-TYPE
The value of this object reflects the number of the packets that arrived after the timeout.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.20Counter32read-onlycurrent
hwNqaStatResRttSum
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.21Counter32read-onlycurrent
hwNqaStatResNumOfDelaySD
OBJECT-TYPE
The number of one way times from source to destination that are successfully measured.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.22Counter32read-onlycurrent
hwNqaStatResMinDelaySD
OBJECT-TYPE
The minimum one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.23Gauge32read-onlycurrent
hwNqaStatResMaxDelaySD
OBJECT-TYPE
The maximum one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.24Gauge32read-onlycurrent
hwNqaStatResSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.25Counter32read-onlycurrent
hwNqaStatResSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.26Counter32read-onlycurrent
hwNqaStatResNumOfDelayDS
OBJECT-TYPE
The number of one way times from destination to source that are successfully measured.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.27Counter32read-onlycurrent
hwNqaStatResMinDelayDS
OBJECT-TYPE
The minimum one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.28Gauge32read-onlycurrent
hwNqaStatResMaxDelayDS
OBJECT-TYPE
The maximum one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.29Gauge32read-onlycurrent
hwNqaStatResSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.30Counter32read-onlycurrent
hwNqaStatResSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.31Counter32read-onlycurrent
hwNqaGroupStatsJitterTable
OBJECT-TYPE
Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hwNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (HwNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.43.45.1.5.25.28.1.12not-accessiblecurrent
hwNqaGroupStatsJitterEntry
OBJECT-TYPE
An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1not-accessiblecurrent
hwNqaStatJitterIndex
OBJECT-TYPE
An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hwNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
hwNqaStatJitterMinOfPosSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.2Gauge32read-onlycurrent
hwNqaStatJitterMaxOfPosSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.3Gauge32read-onlycurrent
hwNqaStatJitterNumOfPosSD
OBJECT-TYPE
The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.4Counter32read-onlycurrent
hwNqaStatJitterSumOfPosSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.5Counter32read-onlycurrent
hwNqaStatJitterSumOfSquarePosSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.6Counter32read-onlycurrent
hwNqaStatJitterMinOfNegSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.7Gauge32read-onlycurrent
hwNqaStatJitterMaxOfNegSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.8Gauge32read-onlycurrent
hwNqaStatJitterNumOfNegSD
OBJECT-TYPE
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.9Counter32read-onlycurrent
hwNqaStatJitterSumOfNegSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.10Counter32read-onlycurrent
hwNqaStatJitterSumOfSquareNegSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.11Counter32read-onlycurrent
hwNqaStatJitterMinOfPosDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.12Gauge32read-onlycurrent
hwNqaStatJitterMaxOfPosDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.13Gauge32read-onlycurrent
hwNqaStatJitterNumOfPosDS
OBJECT-TYPE
The number that records positive jitter times from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.14Counter32read-onlycurrent
hwNqaStatJitterSumOfPosDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.15Counter32read-onlycurrent
hwNqaStatJitterSumOfSquarePosDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.16Counter32read-onlycurrent
hwNqaStatJitterMinOfNegDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.17Gauge32read-onlycurrent
hwNqaStatJitterMaxOfNegDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.18Gauge32read-onlycurrent
hwNqaStatJitterNumOfNegDS
OBJECT-TYPE
The number that records negative jitter times from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.19Counter32read-onlycurrent
hwNqaStatJitterSumOfNegDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.20Counter32read-onlycurrent
hwNqaStatJitterSumOfSquareNegDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.21Counter32read-onlycurrent
hwNqaStatJitterPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.22Counter32read-onlycurrent
hwNqaStatJitterPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.23Counter32read-onlycurrent
hwNqaStatJitterAvePosSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.24Gauge32read-onlycurrent
hwNqaStatJitterAveNegSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.25Gauge32read-onlycurrent
hwNqaStatJitterAvePosDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.26Gauge32read-onlycurrent
hwNqaStatJitterAveNegDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.27Gauge32read-onlycurrent
hwNqaStatJitterPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.28Counter32read-onlycurrent
hwNqaStatJitterMaxOfICPIF
OBJECT-TYPE
The maximum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.29Gauge32read-onlycurrent
hwNqaStatJitterMinOfICPIF
OBJECT-TYPE
The minimum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.30Gauge32read-onlycurrent
hwNqaStatJitterMaxOfMOS
OBJECT-TYPE
The maximum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.31Gauge32read-onlycurrent
hwNqaStatJitterMinOfMOS
OBJECT-TYPE
The minimum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.32Gauge32read-onlycurrent
hwNqaReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.43.45.1.5.25.28.1.13not-accessiblecurrent
hwNqaReactionEntry
OBJECT-TYPE
Defines an entry in the hwNqaReactionTable.The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third index element selects a single reaction.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1not-accessiblecurrent
hwNqaReactOwnerIndex
OBJECT-TYPE
The first index of hwNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed test.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.1SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
hwNqaReactTestName
OBJECT-TYPE
The second index of hwNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed test.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.2SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
hwNqaReactItemIndex
OBJECT-TYPE
The third index of hwNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.3Unsigned32 (1..10)accessible-for-notifycurrent
hwNqaReactCheckedElement
OBJECT-TYPE
A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hwNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hwNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.4INTEGER {probetime(1), probefailure(2), jitterrtt(3), jitterpacketloss(4), jittersd(5), jitterds(6), icpif(7), mos(8), jitterOwdSD(9), jitterOwdDS(10)}read-createcurrent
hwNqaReactThresholdUpperLimit
OBJECT-TYPE
This object defines an administrative upper-threshold value for hwNqaReactCheckedElement. The value of this object is zero if hwNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.5Unsigned32read-createcurrent
hwNqaReactThresholdLowerLimit
OBJECT-TYPE
This object defines an administrative lower-threshold value for hwNqaReactCheckedElement. The value of hwNqaReactThresholdLowerLimit should be equal or less than the value of hwNqaReactThresholdUpperLimit. The value of this object is zero if hwNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.6Unsigned32read-createcurrent
hwNqaReactThresholdType
OBJECT-TYPE
This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hwNqaReactThresholdConsecNum, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hwNqaReactThresholdAccumNum, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.7INTEGER {invalid(0), average(1), consecutive(2), accumulative(3)}read-createcurrent
hwNqaReactThresholdConsecNum
OBJECT-TYPE
This object defines a consecutive threshold limit. The value is zero when hwNqaReactThresholdType is not 'consecutive'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.8Unsigned32read-createcurrent
hwNqaReactThresholdAccumNum
OBJECT-TYPE
This object defines an accumulative threshold limit. The value is zero when the hwNqaReactThresholdType is not 'accumulative'.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.9Unsigned32read-createcurrent
hwNqaReactActionType
OBJECT-TYPE
Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.10INTEGER {none(0), trapOnly(1), triggerOnly(2), trapAndTrigger(3)}read-createcurrent
hwNqaReactCurrentStatus
OBJECT-TYPE
Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the hwNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the hwNqaReactThresholdType and the threshold value.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.11INTEGER {invalid(1), overThreshold(2), belowThreshold(3)}read-onlycurrent
hwNqaReactRowStatus
OBJECT-TYPE
This object allows entries to be created and deleted in the hwNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.12RowStatusread-createcurrent
hwNqaReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.13Unsigned32read-onlycurrent
hwNqaReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.14Unsigned32read-onlycurrent
hwNqaStatisticsReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.43.45.1.5.25.28.1.14not-accessiblecurrent
hwNqaStatisticsReactionEntry
OBJECT-TYPE
Defines an entry in the hwNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third index element identifies an entry in the hwNqaStatisticsResultsTable. The forth index element selects a single reaction.
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1not-accessiblecurrent
hwNqaStatReactOwnerIndex
OBJECT-TYPE
The first index of hwNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.1SnmpAdminString (SIZE(0..32))not-accessiblecurrent
hwNqaStatReactTestName
OBJECT-TYPE
The second index of hwNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.2SnmpAdminString (SIZE(0..32))not-accessiblecurrent
hwNqaStatReactIndex
OBJECT-TYPE
The third index of hwNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hwNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.3Unsigned32not-accessiblecurrent
hwNqaStatReactItemIndex
OBJECT-TYPE
The forth index of hwNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.4Unsigned32not-accessiblecurrent
hwNqaStatReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.5Counter32read-onlycurrent
hwNqaStatReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.6Counter32read-onlycurrent
hwNqaImplementationTypeDomains
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.5.25.28.2
hwNqaUdpEcho
OBJECT-IDENTITY
Indicates that an implementation is using the UDP based echo server. Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hwNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.43.45.1.5.25.28.2.1current
hwNqaTcpconnect
OBJECT-IDENTITY
Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hwNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.43.45.1.5.25.28.2.2current
hwNqajitter
OBJECT-IDENTITY
Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
1.3.6.1.4.1.43.45.1.5.25.28.2.3current
hwNqaHttp
OBJECT-IDENTITY
Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
1.3.6.1.4.1.43.45.1.5.25.28.2.4current
hwNqadlsw
OBJECT-IDENTITY
Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
1.3.6.1.4.1.43.45.1.5.25.28.2.5current
hwNqadhcp
OBJECT-IDENTITY
Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
1.3.6.1.4.1.43.45.1.5.25.28.2.6current
hwNqaftp
OBJECT-IDENTITY
Indicates that an implementation is using tcp packet for ftp connect and data transfer.
1.3.6.1.4.1.43.45.1.5.25.28.2.7current
hwNqaNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.5.25.28.3

Notifications

NameOIDStatus
hwNqaProbeTimeOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdConsecNum. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.1current
hwNqaJitterRTTOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum in one test. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.2current
hwNqaProbeFailure
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hwNqaReactThresholdAccumNum in one test while the value of hwNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hwNqaReactThresholdConsecNum in one test while the value of hwNqaReactThresholdType is 'consecutive'. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.3current
hwNqaJitterPacketLoss
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hwNqaReactThresholdAccumNum in one test while the value of hwNqaReactThresholdType is 'accumulative'. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.4current
hwNqaJitterSDOverThreshold
NOTIFICATION-TYPE
The SD means the jitter values from source to destination. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.5current
hwNqaJitterDSOverThreshold
NOTIFICATION-TYPE
The DS means the jitter values from destination to source. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.
1.3.6.1.4.1.43.45.1.5.25.28.3.6current
hwNqaICPIFOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.43.45.1.5.25.28.3.7current
hwNqaMOSOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' , pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.43.45.1.5.25.28.3.8current