A3COM-HUAWEI-MPLS-LDP-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.5.12.2
- Last updated
- 1999-06-30 12:00
- Organization
- HuaweiMPLS Working Group
- Revisions
- 1996-11-08 21:55
- Namespace
- 3com
- Source file
A3COM-HUAWEI-MPLS-LDP-MIB- Digest
sha256:d13474bd539c38b33dd41540bf5fbcea623d14fe5d02471a64a90c9ca3f4abeb
Description
All rights reserved
Contact
S. Manikantan, Huawei Software Pvt. Ltd., 481, Mount Road, Nandanam. CHENNAI-35 INDIA manis@Huawei.futsoft.com
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-OID-MIB | huaweiMgmt, hwMpls |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-MPLS-LDP-MIB A3COM-HUAWEI-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AddressFamilyNumbers TEXTUAL-CONVENTION An address family. Values are defined in RFC 1700 - Assigned Numbers. All values may not be relevant in all contexts when used in this MIB, but are included for completeness. | current | |||
| AtmVcIdentifier TEXTUAL-CONVENTION The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. | current | |||
| AtmVpIdentifier TEXTUAL-CONVENTION The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. | current | |||
| BitRate type | ||||
| BurstSize type | ||||
| DisplayString type | ||||
| MplsLabel TEXTUAL-CONVENTION Represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the label carried in the MPLS shim header is 20 bits wide and the top 12 bits must be zero. The frame relay label can be either 10, 17 or 23 bits wide depending on the size of the DLCI field size and the top 22, 15, or 9 bits must be zero, respectively. For an ATM interface, the lowermost 16 bits are interpreted as the VCI, the next 8 bits as the VPI and the remaining bits must be zero. Also note the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the datapath. | current | |||
| MplsLdpGenAddr TEXTUAL-CONVENTION The value of an network layer or data link layer address. | current | |||
| MplsLdpIdentifier TEXTUAL-CONVENTION The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. | current | |||
| MplsLsrIdentifier TEXTUAL-CONVENTION The Label Switch Router (LSR) identifier is the first 4 bytes or the IP Address component of the Label Distribution Protocol (LDP) identifier. | current | |||
| MplsTunnelIndex TEXTUAL-CONVENTION Index into mplsTunnelTable. | current | |||
| PhysAddress type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwMplsLdpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1 | |||
| hwMplsLdpLsrObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.1 | |||
| hwMplsLdpLsrIncarnTable OBJECT-TYPE HuaweiMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard <IETF DRAFT> MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1 | not-accessible | current | |
| hwMplsLdpLsrIncarnEntry OBJECT-TYPE An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1 | not-accessible | current | |
| hwMplsLdpLsrID OBJECT-TYPE The LSR's Identifier. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.1 | MplsLsrIdentifier | read-write | current |
| hwMplsLdpLsrLoopDetectionPresent OBJECT-TYPE A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.2 | TruthValue | read-only | current |
| hwMplsLdpLsrLoopDetectionAdminStatus OBJECT-TYPE To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hwMplsLdpLsrPathVectorLimit OBJECT-TYPE This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.4 | INTEGER | read-write | current |
| hwMplsLdpLsrHopCountLimit OBJECT-TYPE This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.5 | INTEGER | read-write | current |
| hwMplsLdpLsrLoopPreventionPresent OBJECT-TYPE A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'true'. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.6 | TruthValue | read-only | current |
| hwMplsLdpLsrLoopPreventionAdminStatus OBJECT-TYPE To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'enabled'. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.7 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hwMplsLdpLsrLabelRetentionMode OBJECT-TYPE The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'liberal'. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.8 | INTEGER {conservative(1), liberal(2)} | read-write | current |
| hwMplsLdpLsrIncarnID OBJECT-TYPE The incarnation acts as index to all the elements in this table. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.9 | INTEGER | read-only | current |
| hwMplsLdpLsrMaxLdpEntities OBJECT-TYPE The maximum number of LDP entities that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.10 | INTEGER (1..1024) | read-write | current |
| hwMplsLdpLsrMaxLocalPeers OBJECT-TYPE The maximum number of Local LDP peers that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.11 | INTEGER (1..1024) | read-write | current |
| hwMplsLdpLsrMaxRemotePeers OBJECT-TYPE The maximum number of Remote LDP peers that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.12 | INTEGER (1..1024) | read-write | current |
| hwMplsLdpLsrMaxIfaces OBJECT-TYPE The maximum number of Label enabled Interfaces that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.13 | INTEGER | read-write | current |
| hwMplsLdpLsrMaxLsps OBJECT-TYPE The maximum number of Label Switched Paths that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.14 | INTEGER | read-write | current |
| hwMplsLdpLsrMaxCrlspTnls OBJECT-TYPE The maximum number of CRLSPs that can be supported by this Incarnation. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.15 | INTEGER | read-write | current |
| hwMplsLdpLsrMaxErhopPerCrlspTnl OBJECT-TYPE The maximum number of ER-Hops that can be supported in a CRLSP tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.16 | INTEGER | read-write | current |
| hwMplsLdpLsrRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.17 | RowStatus | read-create | current |
| hwMplsLdpLsrMaxVcmCapability OBJECT-TYPE | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.18 | INTEGER | read-write | current |
| hwMplsLdpLsrVcmPathVecInAllLblMapPresent OBJECT-TYPE | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.19 | TruthValue | read-write | current |
| hwMplsLdpLsrRequestRetrytimerValue OBJECT-TYPE | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.20 | INTEGER | read-write | current |
| hwMplsLdpLsrNumOfRequestRetryAttempts OBJECT-TYPE | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.21 | INTEGER | read-write | current |
| hwMplsLdpEntityObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.2 | |||
| hwMplsLdpEntityTable OBJECT-TYPE This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1 | not-accessible | current | |
| hwMplsLdpEntityEntry OBJECT-TYPE An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1 | not-accessible | current | |
| hwMplsLdpEntityID OBJECT-TYPE The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.1 | MplsLdpIdentifier | accessible-for-notify | current |
| hwMplsLdpEntityLabelSpaceType OBJECT-TYPE The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.2 | INTEGER {unknown(1), perInterface(2), perPlatform(3)} | read-create | current |
| hwMplsLdpEntityDefVpi OBJECT-TYPE The Default VPI value used in the label for the default VPI. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.3 | AtmVpIdentifier | read-create | current |
| hwMplsLdpEntityDefVci OBJECT-TYPE The Default VCI value used in the label for the default VCI. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.4 | AtmVcIdentifier | read-create | current |
| hwMplsLdpEntityUnlabTrafVpi OBJECT-TYPE VPI value of the VCC supporting unlabeled traffic. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.5 | AtmVpIdentifier | read-create | current |
| hwMplsLdpEntityUnlabTrafVci OBJECT-TYPE VCI value of the VCC supporting unlabeled traffic. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.6 | AtmVcIdentifier | read-create | current |
| hwMplsLdpEntityMergeCapability OBJECT-TYPE Sets the merge capability for this LDP entity. Current Release of HuaweiMPLS does not provide support for any kind of Merge. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.7 | INTEGER {noMerge(0), vpMerge(1), vcMerge(2), vpVcMerge(3)} | read-create | current |
| hwMplsLdpEntityVcDirectionality OBJECT-TYPE Sets the VC directionality for this LDP entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.8 | INTEGER {bidirectional(1), unidirectional(2)} | read-create | current |
| hwMplsLdpEntityWellKnownDiscoveryPort OBJECT-TYPE The well known LDP Discovery Port. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.9 | INTEGER | read-create | current |
| hwMplsLdpEntityMtu OBJECT-TYPE The maximum transmission unit (MTU) that was configured for this entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.10 | INTEGER (0..65535) | read-create | current |
| hwMplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE The two octet value which is the proposed keep alive hold timer for this LDP Entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.11 | INTEGER (1..65535) | read-create | current |
| hwMplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero). | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.12 | INTEGER | read-create | current |
| hwMplsLdpEntityLabelDistributionMethod OBJECT-TYPE For any given LDP session, the method of label distribution must be specified. Current release of HuaweiMPLS does not provide support for 'downstreamUnsolicited'. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.13 | INTEGER {downstreamOnDemand(1), downstreamUnsolicited(2)} | read-create | current |
| hwMplsLdpEntityLabelAllocationMethod OBJECT-TYPE For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.14 | INTEGER {ordered(1), independent(2)} | read-create | current |
| hwMplsLdpEntityHelloHoldTimer OBJECT-TYPE The two octet value which is the proposed hello hold timer for this LDP Entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.15 | INTEGER (1..65535) | read-create | current |
| hwMplsLdpEntityRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.16 | RowStatus | read-create | current |
| hwMplsLdpEntityIfTable OBJECT-TYPE This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2 | not-accessible | current | |
| hwMplsLdpEntityIfEntry OBJECT-TYPE An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1 | not-accessible | current | |
| hwMplsLdpEntityIfIndex OBJECT-TYPE Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hwMplsLdpEntityIfIpv4Address OBJECT-TYPE The IPv4 address associated with the interface. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.2 | IpAddress | read-create | current |
| hwMplsLdpEntityIfRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.3 | RowStatus | read-create | current |
| hwMplsLdpEntityConfAtmLabelRangeTable OBJECT-TYPE The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3 | not-accessible | current | |
| hwMplsLdpEntityConfAtmLabelRangeEntry OBJECT-TYPE A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1 | not-accessible | current | |
| hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.1 | AtmVpIdentifier | not-accessible | current |
| hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.2 | AtmVcIdentifier | not-accessible | current |
| hwMplsLdpEntityConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.3 | AtmVpIdentifier | read-create | current |
| hwMplsLdpEntityConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.4 | AtmVcIdentifier | read-create | current |
| hwMplsLdpEntityConfAtmLabelRangeRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.5 | RowStatus | read-create | current |
| hwMplsLdpEntityStatsTable OBJECT-TYPE This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4 | not-accessible | current | |
| hwMplsLdpEntityStatsEntry OBJECT-TYPE A row in this table contains statistical information about an LDP Entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4.1 | not-accessible | current | |
| hwMplsLdpAttemptedSessions OBJECT-TYPE A count of the total attempted sessions for this LDP Entity. | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4.1.1 | Counter32 | read-only | current |
| hwMplsLdpPeerObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.3 | |||
| hwMplsLdpPeerTable OBJECT-TYPE Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1 | not-accessible | current | |
| hwMplsLdpPeerEntry OBJECT-TYPE Information about a single Peer. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1 | not-accessible | current | |
| hwMplsLdpPeerIndex OBJECT-TYPE An identifier for the LDP peer that is unique within the scope of this agent. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hwMplsLdpPeerID OBJECT-TYPE The LDP identifier of this LDP Peer. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.2 | MplsLdpIdentifier | read-create | current |
| hwMplsLdpPeerInternetworkAddrType OBJECT-TYPE The type of the internetwork layer address of this LDP peer. This object indicates how the value of hwMplsLdpPeerInternetworkAddr is to be interpreted. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.3 | AddressFamilyNumbers | read-create | current |
| hwMplsLdpPeerInternetworkAddr OBJECT-TYPE The value of the internetwork layer address of this LDP peer. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.4 | MplsLdpGenAddr | read-create | current |
| hwMplsLdpPeerDefaultMtu OBJECT-TYPE The default maximum transmission unit (MTU) of the LDP Peer. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.5 | INTEGER (0..65535) | read-create | current |
| hwMplsLdpPeerKeepAliveHoldTimer OBJECT-TYPE The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.6 | INTEGER (1..65535) | read-create | current |
| hwMplsLdpPeerLabelDistributionMethod OBJECT-TYPE For any given LDP session, the method of label distribution must be specified. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.7 | INTEGER {downstreamOnDemand(1), downstreamUnsolicited(2)} | read-create | current |
| hwMplsLdpPeerType OBJECT-TYPE Indicates whether a peer is a local peer or a remote peer | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.8 | INTEGER {local(1), remote(2)} | read-create | current |
| hwMplsLdpPeerRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.9 | RowStatus | read-create | current |
| hwMplsLdpPeerConfAtmLabelRangeTable OBJECT-TYPE The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2 | not-accessible | current | |
| hwMplsLdpPeerConfAtmLabelRangeEntry OBJECT-TYPE A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1 | not-accessible | current | |
| hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.1 | AtmVpIdentifier | not-accessible | current |
| hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.2 | AtmVcIdentifier | not-accessible | current |
| hwMplsLdpPeerConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.3 | AtmVpIdentifier | read-only | current |
| hwMplsLdpPeerConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number configured for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.4 | AtmVcIdentifier | read-only | current |
| hwMplsLdpSessionObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.4 | |||
| hwMplsLdpSessionTable OBJECT-TYPE A table of Sessions between the LDP Entities and LDP Peers. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1 | not-accessible | current | |
| hwMplsLdpSessionEntry OBJECT-TYPE An entry in this table represents information on a single session between an LDP Entity and LDP Peer. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1 | not-accessible | current | |
| hwMplsLdpSessionIndex OBJECT-TYPE An unique identifier for this entry such that it identifies a specific LDP Session. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hwMplsLdpSessionID OBJECT-TYPE The LDP Session identifier. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.2 | MplsLdpIdentifier | read-only | current |
| hwMplsLdpSessionProtocolVersion OBJECT-TYPE The version of the LDP Protocol which this session is using. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.3 | INTEGER (0..65535) | read-only | current |
| hwMplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE The keep alive hold time remaining for this session. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.4 | TimeInterval | read-only | current |
| hwMplsLdpSessionRole OBJECT-TYPE An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.5 | INTEGER {active(1), passive(2)} | read-only | current |
| hwMplsLdpSessionState OBJECT-TYPE The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.6 | INTEGER {nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5)} | read-only | current |
| hwMplsLdpSessionAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.7 | AtmVpIdentifier | read-only | current |
| hwMplsLdpSessionAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.8 | AtmVcIdentifier | read-only | current |
| hwMplsLdpSessionAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.9 | AtmVpIdentifier | read-only | current |
| hwMplsLdpSessionAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number for this range. | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.10 | AtmVcIdentifier | read-only | current |
| hwMplsLdpHelloAdjacencyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.5 | |||
| hwMplsLdpHelloAdjacencyTable OBJECT-TYPE A table of Hello Adjacencies for Sessions. | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1 | not-accessible | current | |
| hwMplsLdpHelloAdjacencyEntry OBJECT-TYPE Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1 | not-accessible | current | |
| hwMplsLdpHelloAdjacencyIndex OBJECT-TYPE An identifier for the adjacency. | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hwMplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE The time remaining for this Hello Adjacency. | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1.2 | TimeInterval | read-only | current |
| hwMplsLdpCrlspTnlObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.1.6 | |||
| hwMplsLdpCrlspTnlTable OBJECT-TYPE The hwMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hwMplsLdpCrlspErHopTable. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1 | not-accessible | current | |
| hwMplsLdpCrlspTnlEntry OBJECT-TYPE An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1 | not-accessible | current | |
| hwMplsLdpCrlspTnlIndex OBJECT-TYPE Uniquely identifies this row. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.1 | MplsTunnelIndex | accessible-for-notify | current |
| hwMplsLdpCrlspTnlName OBJECT-TYPE The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.2 | DisplayString | read-create | current |
| hwMplsLdpCrlspTnlDirection OBJECT-TYPE Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.3 | INTEGER {in(1), out(2), inOut(3)} | read-create | current |
| hwMplsLdpCrlspTnlSignallingProto OBJECT-TYPE The signaling protocol, if any, that set up this tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.4 | INTEGER {none(1), ldp(2), rsvp(3)} | read-create | current |
| hwMplsLdpCrlspTnlSetupPrio OBJECT-TYPE The setup priority of this tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.5 | INTEGER (0..7) | read-create | current |
| hwMplsLdpCrlspTnlHoldingPrio OBJECT-TYPE The holding priority for this tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.6 | INTEGER (0..7) | read-create | current |
| hwMplsLdpCrlspTnlPeakDataRate OBJECT-TYPE The peak rate - the maximum rate at which traffic will be sent on the CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.7 | BitRate | read-create | current |
| hwMplsLdpCrlspTnlPeakBurstSize OBJECT-TYPE The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.8 | BurstSize | read-create | current |
| hwMplsLdpCrlspTnlCommittedDataRate OBJECT-TYPE The committed rate - the committed rate at which traffic will be sent on the CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.9 | BitRate | read-create | current |
| hwMplsLdpCrlspTnlCommittedBurstSize OBJECT-TYPE The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.10 | BurstSize | read-create | current |
| hwMplsLdpCrlspTnlExcessBurstSize OBJECT-TYPE The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.11 | BurstSize | read-create | current |
| hwMplsLdpCrlspTnlIsPinned OBJECT-TYPE Indicates whether the loose-routed hops of this tunnel are to be pinned. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.12 | TruthValue | read-create | current |
| hwMplsLdpCrlspTnlFrequency OBJECT-TYPE Indicates the frequency of usage of the established CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.13 | INTEGER (0..2) | read-create | current |
| hwMplsLdpCrlspTnlWeight OBJECT-TYPE Indicates the weight that is the established CRLSP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.14 | INTEGER (0..255) | read-create | current |
| hwMplsLdpCrlspTnlRowStatus OBJECT-TYPE For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hwMplsLdpErHopTable, associated with this tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.15 | RowStatus | read-create | current |
| hwMplsLdpCrlspErHopTable OBJECT-TYPE The hwMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hwMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hwMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2 | not-accessible | current | |
| hwMplsLdpCrlspErHopEntry OBJECT-TYPE An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1 | not-accessible | current | |
| hwMplsLdpCrlspErHopIndex OBJECT-TYPE Secondary index into this table identifying the particular hop. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.1 | INTEGER | not-accessible | current |
| hwMplsLdpCrlspErHopAddrType OBJECT-TYPE Address type of this hop. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.2 | INTEGER {ipV4(1)} | read-create | current |
| hwMplsLdpCrlspErHopIpv4Addr OBJECT-TYPE If hwMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.3 | IpAddress | read-create | current |
| hwMplsLdpCrlspErHopIpv4PrefixLen OBJECT-TYPE If hwMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.4 | INTEGER (1..32) | read-create | current |
| hwMplsLdpCrlspErHopStrictOrLoose OBJECT-TYPE Whether this is a strict or loose hop. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.5 | INTEGER {strict(1), loose(2)} | read-create | current |
| hwMplsLdpCrlspErHopRowStatus OBJECT-TYPE For creating, modifying and deleting this row. | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.6 | RowStatus | read-create | current |
| hwMplsLdpNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.2 | |||
| hwMplsLdpNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.2.2.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwMplsLdpFailedInitSessionThresholdExceeded NOTIFICATION-TYPE This notification is generated whenever the value of hwMplsLdpEntityFailedInitSessionThreshold is exceeded. | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.1 | current |
| hwMplsLdpCrlspTunnelUp NOTIFICATION-TYPE This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel. | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.2 | current |
| hwMplsLdpCrlspTunnelDown NOTIFICATION-TYPE This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc., | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.3 | current |
| hwMplsLdpCrlspTunnelSetupFailure NOTIFICATION-TYPE This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc., | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.4 | current |
| hwMplsLdpIncarnUpEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the Incarnation UP Event failure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.11 | current |
| hwMplsLdpIncarnDownEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the Incarnation DOWN Event failure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.12 | current |
| hwMplsLdpEntityUpEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the ENTITY UP Event failure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.13 | current |
| hwMplsLdpEntityDownEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the ENTITY DOWN Event failure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.14 | current |
| hwMplsLdpSessionUpEventFailure NOTIFICATION-TYPE Generation of this trap occurs when the value of 'hwMplsLdpSessionState' enters the 'operational(5)' state. | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.15 | current |
| hwMplsLdpSessionDownEventFailure NOTIFICATION-TYPE Generation of this trap occurs when the value of 'hwMplsLdpSessionState' leaves the 'operational(5)' state. | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.16 | current |