A3COM-HUAWEI-MPLS-BGP-VPN-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.5.12.3
- Last updated
- 2001-07-20 12:00
- Organization
- IETF Layer-3 Virtual Private Networks Working Group.
- Revisions
- 2001-07-20 12:00, 2001-07-17 12:00, 2001-07-10 12:00, 2001-06-19 12:00, 2001-05-30 12:00, 2000-09-30 12:00
- Namespace
- 3com
- Source file
A3COM-HUAWEI-MPLS-BGP-VPN-MIB- Digest
sha256:ac9dd5d2ca0b2b05957e01b9bb5df32d11ddaabd85b3201913d907986b0078da
Description
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Contact
Thomas D. Nadeau tnadeau@cisco.com Luyuan Fang luyuanfang@att.com Stephen Brannon Fabio M. Chiussi fabio@bell-labs.com Joseph Dube jdube@avici.com Martin Tatham martin.tatham@bt.com Harmen Van Der Linde hvdl@att.com Comments and discussion to ppvpn@ietf.org
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-OID-MIB | huaweiMgmt, hwMpls |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, experimental, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-MPLS-BGP-VPN-MIB A3COM-HUAWEI-OID-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MplsVpnId TEXTUAL-CONVENTION An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this identifier can then be used at any LSR within a specific MPLS domain to identify this MPLS/BGP VPN. It may also be possible to preserve the uniqueness of this identifier across MPLS domain boundaries, in which case this identifier can then be used to uniquely identify MPLS/BGP VPNs on a more global basis. | current | |||
| MplsVpnRouteDistinguisher TEXTUAL-CONVENTION Syntax for a route distinguisher and route target. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mplsVpnObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.3.1 | |||
| mplsVpnScalars OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.3.1.1 | |||
| mplsVpnConfiguredVrfs OBJECT-TYPE The number of VRFs which are configured on this node. | 1.3.6.1.4.1.43.45.1.5.12.3.1.1.1 | Unsigned32 | read-only | current |
| mplsVpnActiveVrfs OBJECT-TYPE The number of VRFs which are active on this node. That is, those whose operStatus = Up (1). | 1.3.6.1.4.1.43.45.1.5.12.3.1.1.2 | Unsigned32 | read-only | current |
| mplsVpnConf OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.3.1.2 | |||
| mplsVpnInterfaceConfTable OBJECT-TYPE This table specifies per-interface MPLS capability and associated information. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1 | not-accessible | current | |
| mplsVpnInterfaceConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1 | not-accessible | current | |
| mplsVpnInterfaceConfIndex OBJECT-TYPE This is a unique index for an entry in the MplsVPNInterfaceConfTable. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.1 | InterfaceIndex | read-only | current |
| mplsVpnInterfaceLabelEdgeType OBJECT-TYPE Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.2 | INTEGER {providerEdge(1), customerEdge(2)} | read-only | current |
| mplsVpnInterfaceVpnClassification OBJECT-TYPE Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.3 | INTEGER {carrierOfCarrier(1), enterprise(2), interProvider(3)} | read-only | current |
| mplsVpnInterfaceIpAddress OBJECT-TYPE The IP address of this interface. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.4 | InetAddress | read-create | current |
| mplsVpnInterfaceIpAddressMask OBJECT-TYPE The IP address mask of this interface. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.5 | InetAddress | read-create | current |
| mplsVpnInterfaceConfRowStatus OBJECT-TYPE The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will have been associated, otherwise the agent would not allow the association. If the agent only allows read-only operations on this table, it will create entries in this table as they are created. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.6 | RowStatus | read-create | current |
| mplsVpnVrfConfTable OBJECT-TYPE This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2 | not-accessible | current | |
| mplsVpnVrfConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1 | not-accessible | current | |
| mplsVpnVrfName OBJECT-TYPE The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.1 | MplsVpnId | read-only | current |
| mplsVpnVrfRouteDistinguisher OBJECT-TYPE The route distinguisher for this VRF. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.2 | MplsVpnRouteDistinguisher | read-create | current |
| mplsVpnVrfNetPrefixType OBJECT-TYPE Denotes the type network prefix in use for the PE-CE connections. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.3 | INTEGER {other(1), rip(2), ospf(3), isis(4), bgp(5), static(6)} | read-only | current |
| mplsVpnVrfNetPrefix OBJECT-TYPE Denotes the network prefix for the PE-CE connections. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.4 | InetAddress | read-only | current |
| mplsVpnVrfIpRouteRedistributeConn OBJECT-TYPE Denotes the redistribution of directly connected networks into the VRF BGP table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.5 | TruthValue | read-create | current |
| mplsVpnVrfIpRouteRedistributeStatic OBJECT-TYPE Denotes the redistribution of static routes into the VRF BGP table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.6 | TruthValue | read-create | current |
| mplsVpnVrfIpRouteRedistributeRip OBJECT-TYPE Denotes the redistribution of rip routes into the VRF BGP table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.7 | TruthValue | read-create | current |
| mplsVpnVrfConfHighRouteThreshold OBJECT-TYPE Denotes high-level water marker for the number of routes which this VRF may hold. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.8 | Unsigned32 | read-create | current |
| mplsVpnVrfConfIsWarnOnly OBJECT-TYPE Denotes the action when the amount of VPN's routes exceed the mplsVpnVrfConfHighRouteThreshold. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.9 | TruthValue | read-create | current |
| mplsVpnVrfConfMaxRoutes OBJECT-TYPE Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to mplsVrfMaxPossibleRoutes unless it is set to 0. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.10 | Unsigned32 | read-create | current |
| mplsVpnVrfConfRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.11 | RowStatus | read-create | current |
| mplsVpnVrfRouteTargetTable OBJECT-TYPE This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3 | not-accessible | current | |
| mplsVpnVrfRouteTargetEntry OBJECT-TYPE An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1 | not-accessible | current | |
| mplsVpnVrfRouteTarget OBJECT-TYPE The route target distribution policy. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.1 | MplsVpnRouteDistinguisher | read-only | current |
| mplsVpnVrfRouteTargetType OBJECT-TYPE The route target export distribution type. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.2 | INTEGER {import(1), export(2)} | read-only | current |
| mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE Row status for this entry. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.3 | RowStatus | read-create | current |
| mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4 | not-accessible | current | |
| mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1 | not-accessible | current | |
| mplsVpnVrfBgpNbrAddr OBJECT-TYPE Denotes the BGP neighbor address. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.1 | InetAddress | read-only | current |
| mplsVpnVrfBgpNbrRole OBJECT-TYPE Denotes the role played by this BGP neighbor with respect to this VRF. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.2 | INTEGER {ce(1), pe(2)} | read-create | current |
| mplsVpnVrfBgpNbrType OBJECT-TYPE Denotes the address family of the PE address. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.3 | InetAddressType | read-create | current |
| mplsVpnVrfBgpNbrAsNumber OBJECT-TYPE The Automonous System that the BGP's neighbour in. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.4 | Unsigned32 | read-create | current |
| mplsVpnVrfBgpNbrAdminStatus OBJECT-TYPE The action set by SNMP client. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.5 | INTEGER {mplsVpnVrfBgpNbrSetUp(1), mplsVpnVrfBgpNbrSetDown(2)} | read-create | current |
| mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.6 | RowStatus | read-create | current |
| mplsVpnRoute OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.5.12.3.1.3 | |||
| mplsVpnVrfRouteTable OBJECT-TYPE This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in the same VRF. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1 | not-accessible | current | |
| mplsVpnVrfRouteEntry OBJECT-TYPE An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1 | not-accessible | current | |
| mplsVpnVrfRouteDest OBJECT-TYPE The destination IP address of this route. This object may not take a Multicast (Class D) address value. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.1 | InetAddress | read-only | current |
| mplsVpnVrfRouteMask OBJECT-TYPE Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mplsVpnVrfRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of the corresponding instance of the mplsVpnVrfRouteDest object is not equal to mplsVpnVrfRouteDest. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.2 | InetAddress | read-create | current |
| mplsVpnVrfRouteNextHop OBJECT-TYPE On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. . | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.3 | InetAddress | read-only | current |
| mplsVpnVrfRouteIfIndex OBJECT-TYPE The ifIndex value that identifies the local interface through which the next hop of this route should be reached. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.4 | InterfaceIndex | read-create | current |
| mplsVpnVrfRouteProto OBJECT-TYPE The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.5 | INTEGER {other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16)} | read-create | current |
| mplsVpnVrfRouteRowStatus OBJECT-TYPE Row status for this table. It is used according to row installation and removal conventions. | 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.6 | RowStatus | read-create | current |