A3COM-HUAWEI-LswVLAN-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.2.23.1.2
- Last updated
- 2001-12-26 14:52
- Organization
- Hangzhou H3C Tech. Co., Ltd.
- Namespace
- 3com
- Source file
A3COM-HUAWEI-LswVLAN-MIB- Digest
sha256:2df2be385561dcf9adbc168c3975770aa22f129d0b7f730da614bf2863cf9df2
Contact
Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-LswINF-MIB | PortList, hwifVLANTrunkStatusEntry |
| A3COM-HUAWEI-OID-MIB | lswCommon |
| IF-MIB | ifEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-LswINF-MIB A3COM-HUAWEI-LswVLAN-MIB A3COM-HUAWEI-OID-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HwVlanIndex TEXTUAL-CONVENTION A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwLswVlanMngObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1 | current | ||
| hwdot1qVlanMIBTable OBJECT-TYPE VLAN MIB table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1 | not-accessible | current | |
| hwdot1qVlanMIBEntry OBJECT-TYPE Entries of VLAN MIB table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1 | not-accessible | current | |
| hwdot1qVlanIndex OBJECT-TYPE The VLAN-ID. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.1 | HwVlanIndex | read-only | current |
| hwdot1qVlanName OBJECT-TYPE Name of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.2 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| hwdot1qVlanPorts OBJECT-TYPE Port list of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.3 | PortList | read-write | current |
| hwdot1qVlanType OBJECT-TYPE Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.4 | INTEGER {superVlan(1), common-vlan(2), sub-vlan(3), isolate-user-vlan(4), secondary-vlan(5)} | read-write | current |
| hwdot1qVlanMacFilter OBJECT-TYPE Whether to filter MAC addresses. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.5 | TruthValue | read-only | current |
| hwdot1qVlanMcastUnknownProtos OBJECT-TYPE Whether to broadcast the unknown packets. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.6 | TruthValue | read-only | current |
| hwExistInterface OBJECT-TYPE Whether there is virtual interface. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.7 | TruthValue | read-only | current |
| hwVlanInterfaceIndex OBJECT-TYPE Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.8 | INTEGER | read-only | current |
| hwdot1qVlanMacLearn OBJECT-TYPE MAC address learning identity. (common vlan/Sub-vlan) | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.9 | TruthValue | read-only | current |
| hwdot1qVlanStatus OBJECT-TYPE Status of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.10 | INTEGER {other(1), static(2), dynamic(3)} | read-only | current |
| hwdot1qVlanCreationTime OBJECT-TYPE The sysUPTime when the VLAN is created. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.11 | TimeTicks | read-only | current |
| hwdot1qVlanPriority OBJECT-TYPE Priority of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.12 | INTEGER (0..7) | read-write | current |
| hwdot1qVlanRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.13 | RowStatus | read-create | current |
| hwdot1qVlanBroadcastSuppression OBJECT-TYPE Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.14 | INTEGER (0..100) | read-write | current |
| hwdot1qVlanBcastSuppressionPPS OBJECT-TYPE If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hwdot1qVlanBroadcastSuppression. If the mode is set, hwdot1qVlanBroadcastSuppression is unavailable. And vice versa. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.15 | INTEGER (0..148800) | read-write | current |
| hwdot1qVlanMulticast OBJECT-TYPE Multicast vlan. The default value is disable(0). | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.16 | INTEGER {disable(0), enable(1)} | read-write | current |
| hwdot1qVlanTaggedPorts OBJECT-TYPE Tagged port list of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.17 | PortList | read-only | current |
| hwdot1qVlanUntaggedPorts OBJECT-TYPE Untagged port list of the VLAN. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.18 | PortList | read-only | current |
| hwdot1qVlanPortIndexs OBJECT-TYPE PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.19 | OCTET STRING | read-write | current |
| hwVlanInterfaceTable OBJECT-TYPE Virtual interface configuration table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2 | not-accessible | current | |
| hwVlanInterfaceEntry OBJECT-TYPE Entries of virtual interface configuration table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1 | not-accessible | current | |
| hwVlanInterfaceID OBJECT-TYPE Index of the vlan interface table. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.1 | INTEGER | read-only | current |
| hwdot1qVlanID OBJECT-TYPE VLAN-ID | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.2 | HwVlanIndex | read-only | current |
| hwdot1qVlanIpAddress OBJECT-TYPE IP address of interface. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.3 | IpAddress | read-write | current |
| hwdot1qVlanIpAddressMask OBJECT-TYPE IP address mask of interface. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.4 | IpAddress | read-write | current |
| hwVlanInterfaceAdminStatus OBJECT-TYPE Status of VLAN virtual interfaces. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.5 | INTEGER {up(1), down(2)} | read-write | current |
| hwVlanInterfaceFrameType OBJECT-TYPE Frame type accepted by VLAN virtual interfaces. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.6 | INTEGER {ethernet-ii(1), ethernet-snap(2), ethernet-8022(3), ethernet-8023(4)} | read-only | current |
| hwInterfaceRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.7 | RowStatus | read-create | current |
| hwVlanInterfaceIpMethod OBJECT-TYPE Vlan interface ip address acquiring method which is manual, dhcp or bootp. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.8 | INTEGER {assigned-ip(1), dhcp-ip(2), bootp-ip(3)} | read-write | current |
| hwVlanInterfaceIfIndex OBJECT-TYPE IfIndex of VLAN interface. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.9 | INTEGER | read-only | current |
| hwifIsolateMappingTable OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4 | not-accessible | current | |
| hwifIsolateMappingEntry OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1 | not-accessible | current | |
| hwifIsolatePrimaryVlanID OBJECT-TYPE Primary VLAN-ID. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.1 | HwVlanIndex | read-only | current |
| hwifIsolateSecondaryVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifIsolateSecondaryVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwVlanInterfaceAddrTable OBJECT-TYPE VLAN interface IP address configuration table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5 | not-accessible | current | |
| hwVlanInterfaceAddrEntry OBJECT-TYPE Entries of VLAN interface IP address configuration table | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1 | not-accessible | current | |
| hwVlanInterfaceIpIfIndex OBJECT-TYPE Index of VLAN interfaces. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.1 | INTEGER | read-only | current |
| hwVlanInterfaceIpAddr OBJECT-TYPE IP address of VLAN interface. When taking destory operation, you could set it zero to destory all IP addresses(but cluster IP address) in this VLAN interface. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.2 | IpAddress | read-write | current |
| hwVlanInterfaceIpMask OBJECT-TYPE IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.3 | IpAddress | read-write | current |
| hwVlanInterfaceIpType OBJECT-TYPE IP address type. cluster(3) will only be set when taking GET or GET NEXT operation. primary(1) is optional when taking SET primary IP address operation. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.4 | INTEGER {primary(1), sub(2), cluster(3), vrrp(4)} | read-write | current |
| hwVlanInterfaceIpRowStatus OBJECT-TYPE Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.5 | RowStatus | read-create | current |
| hwdot1qVlanBatchMIBTable OBJECT-TYPE VLAN batch configuration table. In the case of VLAN batch creation, hwdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hwdot1qVlanBatchStartIndex 2, hwdot1qVlanBatchEndIndex 4, hwdot1qVlanBatchSetOperate create(1), hwdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hwdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hwdot1qVlanBatchStartIndex 10, hwdot1qVlanBatchEndIndex 20, hwdot1qVlanBatchSetOperate delete(2), hwdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6 | not-accessible | current | |
| hwDot1qVlanBatchMIBEntry OBJECT-TYPE VLAN batch configuration entry. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1 | not-accessible | current | |
| hwdot1qVlanBatchOperIndex OBJECT-TYPE The consequence of operation. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.1 | Integer32 | read-only | current |
| hwdot1qVlanBatchStartIndex OBJECT-TYPE The value of start VLAN-ID. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.2 | HwVlanIndex | read-write | current |
| hwdot1qVlanBatchEndIndex OBJECT-TYPE The value of end VLAN-ID. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.3 | HwVlanIndex | read-write | current |
| hwdot1qVlanBatchOperStatus OBJECT-TYPE The status of operation. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.4 | INTEGER {opInprogress(1), opfailure(2), opsuccess(3), opsuccesspartial(4)} | read-only | current |
| hwdot1qVlanBatchRowStatus OBJECT-TYPE The row status of HwDot1qVlanBatchMIBEntry. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.5 | RowStatus | read-create | current |
| hwdot1qVlanBatchSetOperate OBJECT-TYPE VLAN batch creation or deletion. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.6 | INTEGER {create(1), delete(2)} | read-create | current |
| hwifSuperVlanMappingTable OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7 | not-accessible | current | |
| hwifSuperVlanMappingEntry OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1 | not-accessible | current | |
| hwifSuperVlanID OBJECT-TYPE Super VLAN ID. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.1 | HwVlanIndex | read-only | current |
| hwifSubVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifSubVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwLswVlanProtoObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2 | current | ||
| hwVLANMibGarpLeaveAllTime OBJECT-TYPE The GARP LeaveAll time, in centiseconds. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.14 | TimeInterval | read-write | current |
| hwvLANMibSwitchCountTable OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15 | not-accessible | current | |
| hwvLANMibSwitchCountEntry OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1 | not-accessible | current | |
| hwVLANMibSwitchGMRPRXPkt OBJECT-TYPE Number of GMRP frames received. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.1 | Counter32 | read-only | current |
| hwVLANMibSwitchGVRPRXPkt OBJECT-TYPE Number of GVRP frames received. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.2 | Counter32 | read-only | current |
| hwVLANMibSwitchGMRPTXPkt OBJECT-TYPE Number of GMRP frames transmitted. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.3 | Counter32 | read-only | current |
| hwVLANMibSwitchGVRPTXPkt OBJECT-TYPE Number of GVRP frames transmitted. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.4 | Counter32 | read-only | current |
| hwVLANMibSwitchDiscardedPkt OBJECT-TYPE Number of discarded frames. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.5 | Counter32 | read-only | current |
| hwVLANMibSwitchGarpStatClear OBJECT-TYPE Clear various Statistics viz. read operation not supported. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.6 | INTEGER {clear(1)} | read-write | current |
| hwvLANMibHoldTimeTable OBJECT-TYPE A table for setting/getting the Hold Time for a particular port. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16 | not-accessible | current | |
| hwvLANMibHoldTimeEntry OBJECT-TYPE A table for setting/getting the HoldTime of the port. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16.1 | not-accessible | current | |
| hwVLANMibHoldTime OBJECT-TYPE HoldTime of the port. | 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16.1.1 | INTEGER (10..32765) | read-write | current |