MIBs Depot

A3COM-HUAWEI-LswQos-MIB

Registered at
1.3.6.1.4.1.43.45.1.2.23.1.16
Last updated
2002-11-19 00:00
Organization
HUAWEI LANSWITCH
Revisions
2002-11-19 00:00
Namespace
3com
Source file
A3COM-HUAWEI-LswQos-MIB
Digest
sha256:46ce2dc73bfcecda85b2e75b72f38e339aac0aeb551473ba58d91f4a1a8bfcdf

Description

Module node for qos and acl.

Contact

huawei beiyan

Imports

FromSymbols
A3COM-HUAWEI-OID-MIBlswCommon
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM-HUAWEI-LswQos-MIB
A3COM-HUAWEI-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
HwMirrorOrMonitorType
TEXTUAL-CONVENTION
Specify the mirror source or destination type. port(1): the mirror source or destination is port. board(2): the mirror source or destination is board.
current

Objects

NameOIDSyntaxAccessStatus
hwLswQosMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.2.23.1.16.2
hwPriorityTrustMode
OBJECT-TYPE
Priority type of inbound queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.1INTEGER {default(0), dscp(1), ipprecedence(2), cos(3), localprecedence(4)}read-writecurrent
hwPortMonitorBothIfIndex
OBJECT-TYPE
The ifIndex of in/out monitor port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.2INTEGERread-writecurrent
hwQueueTable
OBJECT-TYPE
Queue table which contains queue entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3not-accessiblecurrent
hwQueueEntry
OBJECT-TYPE
The configuration information of queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1not-accessiblecurrent
hwQueueIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.1INTEGERread-onlycurrent
hwQueueScheduleMode
OBJECT-TYPE
The mode of the queue schedule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.2INTEGER {sp(1), wrr(2), wrr-max-delay(3), sc-0(4), sc-1(5), sc-2(6), rr(7), wfq(8), hq-wrr(9)}read-writecurrent
hwQueueWeight1
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hwQueueWeight1 represent the weight of queue 1.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.3INTEGERread-writecurrent
hwQueueWeight2
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hwQueueWeight2 represent the weight of queue 2.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.4INTEGERread-writecurrent
hwQueueWeight3
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hwQueueWeight3 represent the weight of queue 3.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.5INTEGERread-writecurrent
hwQueueWeight4
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hwQueueWeight4 represent the weight of queue 4.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.6INTEGERread-writecurrent
hwQueueMaxDelay
OBJECT-TYPE
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.7INTEGER (0..255)read-writecurrent
hwQueueWeight5
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hwQueueWeight5 represent the weight of queue 5.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.8INTEGERread-writecurrent
hwQueueWeight6
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hwQueueWeight6 represent the weight of queue 6.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.9INTEGERread-writecurrent
hwQueueWeight7
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hwQueueWeight7 represent the weight of queue 7.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.10INTEGERread-writecurrent
hwQueueWeight8
OBJECT-TYPE
If queue mode is wfq, then hwQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hwQueueWeight8 represent the weight of queue 8.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.11INTEGERread-writecurrent
hwRateLimitTable
OBJECT-TYPE
Rate limit table which contains limit entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4not-accessiblecurrent
hwRateLimitEntry
OBJECT-TYPE
The configuration information of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1not-accessiblecurrent
hwRateLimitAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.1INTEGER (0..2999)read-createcurrent
hwRateLimitIfIndex
OBJECT-TYPE
ifIndex of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.2INTEGERread-createcurrent
hwRateLimitVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.3INTEGER (0..4094)read-createcurrent
hwRateLimitDirection
OBJECT-TYPE
Direction of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hwRateLimitUserAclNum
OBJECT-TYPE
The number of user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hwRateLimitUserAclRule
OBJECT-TYPE
The number of user acl-rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.6INTEGER (0..65535)read-createcurrent
hwRateLimitIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwRateLimitIpAclRule
OBJECT-TYPE
The number of Ip acl-rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.8INTEGER (0..65535)read-createcurrent
hwRateLimitLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwRateLimitLinkAclRule
OBJECT-TYPE
The number of link acl-rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.10INTEGER (0..65535)read-createcurrent
hwRateLimitTargetRateMbps
OBJECT-TYPE
Target rate: Mbps.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.11INTEGERread-createcurrent
hwRateLimitTargetRateKbps
OBJECT-TYPE
Target rate: Kbps.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.12INTEGERread-createcurrent
hwRateLimitPeakRate
OBJECT-TYPE
Peak rate of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.13INTEGER (0 | 64..8388608)read-createcurrent
hwRateLimitCIR
OBJECT-TYPE
CIR of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.14INTEGER (0..34120000)read-createcurrent
hwRateLimitCBS
OBJECT-TYPE
Burst traffic of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.15INTEGER (0..1048575)read-createcurrent
hwRateLimitEBS
OBJECT-TYPE
Excess burst traffic of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.16INTEGER (0..268435455)read-createcurrent
hwRateLimitPIR
OBJECT-TYPE
PIR of the rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.17INTEGER (0..34120000)read-createcurrent
hwRateLimitConformLocalPre
OBJECT-TYPE
Conform local pre.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.18INTEGERread-createcurrent
hwRateLimitConformActionType
OBJECT-TYPE
Conform action type.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.19INTEGER {invalid(0), remark-cos(1), remark-drop-priority(2), remark-cos-drop-priority(3), remark-policed-service(4), remark-dscp(5)}read-createcurrent
hwRateLimitExceedActionType
OBJECT-TYPE
Exceed action type.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.20INTEGER {invalid(0), forward(1), drop(2), remarkdscp(3), exceed-cos(4)}read-createcurrent
hwRateLimitExceedDscp
OBJECT-TYPE
Exceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.21INTEGER (0..63 | 255)read-createcurrent
hwRateLimitRuntime
OBJECT-TYPE
Runtime.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.22TruthValueread-onlycurrent
hwRateLimitRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.23RowStatusread-createcurrent
hwRateLimitExceedCos
OBJECT-TYPE
Exceeding COS of rate-limited port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.24INTEGERread-createcurrent
hwRateLimitConformCos
OBJECT-TYPE
If the user choose remark-cos value of the hwRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.25INTEGER (0..7 | 255)read-createcurrent
hwRateLimitConformDscp
OBJECT-TYPE
If the user choose remark-dscp value of the hwRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.26INTEGER (0..63 | 255)read-createcurrent
hwRateLimitMeterStatByteCount
OBJECT-TYPE
The counter of conform byte.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.27Counter64read-onlycurrent
hwRateLimitMeterStatByteXCount
OBJECT-TYPE
The counter of exceed byte.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.28Counter64read-onlycurrent
hwRateLimitMeterStatState
OBJECT-TYPE
The status of meter statistic.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.29INTEGER {set(1), unDo(2), reset(3), running(4), notRunning(5)}read-createcurrent
hwPriorityTable
OBJECT-TYPE
The priority table which contains priority entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5not-accessiblecurrent
hwPriorityEntry
OBJECT-TYPE
The configuration information of priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1not-accessiblecurrent
hwPriorityAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.1INTEGER (0..2999)read-createcurrent
hwPriorityIfIndex
OBJECT-TYPE
ifIndex of the port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.2INTEGERread-createcurrent
hwPriorityVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.3INTEGER (0..4094)read-createcurrent
hwPriorityDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hwPriorityUserAclNum
OBJECT-TYPE
The number of user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hwPriorityUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.6INTEGER (0..65535)read-createcurrent
hwPriorityIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwPriorityIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.8INTEGER (0..65535)read-createcurrent
hwPriorityLinkAclNum
OBJECT-TYPE
The number of Link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwPriorityLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.10INTEGER (0..65535)read-createcurrent
hwPriorityDscp
OBJECT-TYPE
Set DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.11INTEGER (0..63 | 255)read-createcurrent
hwPriorityIpPre
OBJECT-TYPE
Set Ip precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.12INTEGER (0..7 | 255)read-createcurrent
hwPriorityIpPreFromCos
OBJECT-TYPE
Set Ip precedence according to vlan priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.13TruthValueread-createcurrent
hwPriorityCos
OBJECT-TYPE
Set vlan priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.14INTEGER (0..7 | 255)read-createcurrent
hwPriorityCosFromIpPre
OBJECT-TYPE
Set vlan priority according to IP precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.15TruthValueread-createcurrent
hwPriorityLocalPre
OBJECT-TYPE
Set local precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.16INTEGER (0..7 | 255)read-createcurrent
hwPriorityPolicedServiceType
OBJECT-TYPE
The service type of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.17INTEGER {invalid(0), auto(1), trust-dscp(2), new-dscp(3), untrusted(4)}read-createcurrent
hwPriorityPolicedServiceDscp
OBJECT-TYPE
The service Dscp of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.18INTEGER (0..63 | 255)read-createcurrent
hwPriorityPolicedServiceExp
OBJECT-TYPE
The service Exp of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.19INTEGER (0..7 | 255)read-createcurrent
hwPriorityPolicedServiceCos
OBJECT-TYPE
The service COS of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.20INTEGER (0..7 | 255)read-createcurrent
hwPriorityPolicedServiceLoaclPre
OBJECT-TYPE
The service local pre of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.21INTEGER (0..7 | 255)read-createcurrent
hwPriorityPolicedServiceDropPriority
OBJECT-TYPE
The service drop priority of proliced Priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.22INTEGER (0..2 | 255)read-createcurrent
hwPriorityRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.23TruthValueread-onlycurrent
hwPriorityRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.24RowStatusread-createcurrent
hwRedirectTable
OBJECT-TYPE
Redirect table which contains rediect entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6not-accessiblecurrent
hwRedirectEntry
OBJECT-TYPE
Configuration information of redirection.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1not-accessiblecurrent
hwRedirectAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.1INTEGER (0..2999)read-createcurrent
hwRedirectIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.2INTEGERread-createcurrent
hwRedirectVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.3INTEGER (0..4094)read-createcurrent
hwRedirectDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hwRedirectUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hwRedirectUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.6INTEGER (0..65535)read-createcurrent
hwRedirectIpAclNum
OBJECT-TYPE
The num of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwRedirectIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.8INTEGER (0..65535)read-createcurrent
hwRedirectLinkAclNum
OBJECT-TYPE
The num of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwRedirectLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.10INTEGER (0..65535)read-createcurrent
hwRedirectToCpu
OBJECT-TYPE
Redirect to cpu.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.11TruthValueread-createcurrent
hwRedirectToIfIndex
OBJECT-TYPE
The ifIndex of port to be redirect to.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.12INTEGERread-createcurrent
hwRedirectToNextHop1
OBJECT-TYPE
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.13IpAddressread-createcurrent
hwRedirectToNextHop2
OBJECT-TYPE
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.14IpAddressread-createcurrent
hwRedirectRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.15TruthValueread-onlycurrent
hwRedirectRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.16RowStatusread-createcurrent
hwRedirectToSlotNo
OBJECT-TYPE
The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.17INTEGER (1..16)read-createcurrent
hwRedirectRemarkedDSCP
OBJECT-TYPE
DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.18INTEGER (0..63 | 255)read-createcurrent
hwRedirectRemarkedPri
OBJECT-TYPE
The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.19INTEGER (0..7 | 255)read-createcurrent
hwRedirectRemarkedTos
OBJECT-TYPE
The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.20INTEGER (0..15 | 255)read-createcurrent
hwRedirectToNextHop3
OBJECT-TYPE
The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.21IpAddressread-createcurrent
hwRedirectTargetVlanID
OBJECT-TYPE
The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.22INTEGER (0..4094)read-createcurrent
hwRedirectMode
OBJECT-TYPE
The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.23INTEGER {strict-priority(1), load-balance(2)}read-createcurrent
hwRedirectToNestedVlanID
OBJECT-TYPE
The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.24Integer32read-createcurrent
hwRedirectToModifiedVlanID
OBJECT-TYPE
The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.25Integer32read-createcurrent
hwStatisticTable
OBJECT-TYPE
Statistic table which contains statistic entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7not-accessiblecurrent
hwStatisticEntry
OBJECT-TYPE
Configuration about statistic information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1not-accessiblecurrent
hwStatisticAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.1INTEGER (0..2999)read-createcurrent
hwStatisticIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.2INTEGERread-createcurrent
hwStatisticVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.3INTEGER (0..4094)read-createcurrent
hwStatisticDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hwStatisticUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hwStatisticUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.6INTEGER (0..65535)read-createcurrent
hwStatisticIpAclNum
OBJECT-TYPE
The number of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwStatisticIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.8INTEGER (0..65535)read-createcurrent
hwStatisticLinkAclNum
OBJECT-TYPE
The number of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwStatisticLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.10INTEGER (0..65535)read-createcurrent
hwStatisticRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.11TruthValueread-onlycurrent
hwStatisticPacketCount
OBJECT-TYPE
The counter of the packets which is matched.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.12Counter64read-onlycurrent
hwStatisticByteCount
OBJECT-TYPE
The counter of the byte which is matched.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.13Counter64read-onlycurrent
hwStatisticCountClear
OBJECT-TYPE
Clear the counter of the packets.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.14INTEGER {cleared(1), nouse(2)}read-writecurrent
hwStatisticRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.15RowStatusread-createcurrent
hwStatisticPacketXCount
OBJECT-TYPE
The counter of the outprofile packets.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.16Counter64read-onlycurrent
hwStatisticByteXCount
OBJECT-TYPE
The counter of the outprofile bytes.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.17Counter64read-onlycurrent
hwMirrorTable
OBJECT-TYPE
Mirror table which contains mirror entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8not-accessiblecurrent
hwMirrorEntry
OBJECT-TYPE
Configuration information to be mirrored.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1not-accessiblecurrent
hwMirrorAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.1INTEGER (0..2999)read-createcurrent
hwMirrorIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.2INTEGERread-createcurrent
hwMirrorVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.3INTEGER (0..4094)read-createcurrent
hwMirrorDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hwMirrorUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hwMirrorUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.6INTEGER (0..65535)read-createcurrent
hwMirrorIpAclNum
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwMirrorIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.8INTEGER (0..65535)read-createcurrent
hwMirrorLinkAclNum
OBJECT-TYPE
The number of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwMirrorLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.10INTEGER (0..65535)read-createcurrent
hwMirrorToIfIndex
OBJECT-TYPE
The ifIndex of port that to be mirrored to.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.11INTEGERread-createcurrent
hwMirrorToCpu
OBJECT-TYPE
Mirror to cpu.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.12TruthValueread-createcurrent
hwMirrorRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.13TruthValueread-onlycurrent
hwMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.14RowStatusread-createcurrent
hwMirrorToGroup
OBJECT-TYPE
The destination of stream-based mirroring is the mirroring group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.15Integer32read-createcurrent
hwPortMirrorTable
OBJECT-TYPE
Port Mirror.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.9not-accessiblecurrent
hwPortMirrorEntry
OBJECT-TYPE
Configuration information of port mirroring.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1not-accessiblecurrent
hwPortMirrorIfIndex
OBJECT-TYPE
The ifIndex of mirror port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.1INTEGERread-createcurrent
hwPortMirrorDirection
OBJECT-TYPE
The direction of mirror port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.2INTEGER {in(1), out(2), both(3)}read-createcurrent
hwPortMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.3RowStatusread-createcurrent
hwLineRateTable
OBJECT-TYPE
Line Rate.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10not-accessiblecurrent
hwLineRateEntry
OBJECT-TYPE
Configuration information of line-rate port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1not-accessiblecurrent
hwLineRateIfIndex
OBJECT-TYPE
The ifIndex of port of line rate.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.1INTEGERread-createcurrent
hwLineRateDirection
OBJECT-TYPE
The direction of line rate.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.2INTEGER {in(1), out(2)}read-createcurrent
hwLineRateValue
OBJECT-TYPE
The value of the line-rate.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.3INTEGERread-createcurrent
hwLineRateRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.4RowStatusread-createcurrent
hwBandwidthTable
OBJECT-TYPE
Bandwidth.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11not-accessiblecurrent
hwBandwidthEntry
OBJECT-TYPE
Configuration information of bandwidth of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1not-accessiblecurrent
hwBandwidthAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.1INTEGER (0..2999)read-createcurrent
hwBandwidthIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.2INTEGERread-createcurrent
hwBandwidthVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.3INTEGER (0..4094)read-createcurrent
hwBandwidthDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.4INTEGER {invalid(0), output(2)}read-createcurrent
hwBandwidthIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.5INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwBandwidthIpAclRule
OBJECT-TYPE
The subitem of ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.6INTEGER (0..65535)read-createcurrent
hwBandwidthLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.7INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwBandwidthLinkAclRule
OBJECT-TYPE
The subitem of link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.8INTEGER (0..65535)read-createcurrent
hwBandwidthMinGuaranteedWidth
OBJECT-TYPE
The min width which is guaranteed.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.9INTEGER (1..8388608)read-writecurrent
hwBandwidthMaxGuaranteedWidth
OBJECT-TYPE
The max width which is guaranteed.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.10INTEGER (1..8388608)read-writecurrent
hwBandwidthWeight
OBJECT-TYPE
Weight of bandwidth.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.11INTEGER (0..100)read-writecurrent
hwBandwidthRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.12TruthValueread-onlycurrent
hwBandwidthRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.13RowStatusread-writecurrent
hwRedTable
OBJECT-TYPE
Red table which contains RED entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12not-accessiblecurrent
hwRedEntry
OBJECT-TYPE
Configuration information of RED.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1not-accessiblecurrent
hwRedAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.1INTEGER (0..2999)read-createcurrent
hwRedIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.2INTEGERread-createcurrent
hwRedVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.3INTEGER (0..4094)read-createcurrent
hwRedDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.4INTEGER {invalid(0), output(2)}read-createcurrent
hwRedIpAclNum
OBJECT-TYPE
The num of Ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.5INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hwRedIpAclRule
OBJECT-TYPE
The subitem of Ip acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.6INTEGER (0..65535)read-createcurrent
hwRedLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.7INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hwRedLinkAclRule
OBJECT-TYPE
The subitem of link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.8INTEGER (0..65535)read-createcurrent
hwRedStartQueueLen
OBJECT-TYPE
The length of Starting queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.9INTEGER (0..262128)read-writecurrent
hwRedStopQueueLen
OBJECT-TYPE
The length of stopping queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.10INTEGER (0..262128)read-writecurrent
hwRedProbability
OBJECT-TYPE
Probability.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.11INTEGER (0..100)read-writecurrent
hwRedRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.12TruthValueread-onlycurrent
hwRedRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.13RowStatusread-writecurrent
hwMirrorGroupTable
OBJECT-TYPE
Mirror Group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13not-accessiblecurrent
hwMirrorGroupEntry
OBJECT-TYPE
Configuration information of mirroring group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1not-accessiblecurrent
hwMirrorGroupID
OBJECT-TYPE
Group ID of mirroring group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.1INTEGER (1..20)read-onlycurrent
hwMirrorGroupDirection
OBJECT-TYPE
Direction of data stream which would be mirrored.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.2INTEGER {input(1), output(2)}read-writecurrent
hwMirrorGroupMirrorIfIndexList
OBJECT-TYPE
ifIndex list of source port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.3OCTET STRING (SIZE(1..257))read-writecurrent
hwMirrorGroupMonitorIfIndex
OBJECT-TYPE
ifIndex of destination port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.4INTEGERread-writecurrent
hwMirrorGroupRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.5RowStatusread-writecurrent
hwFlowtempTable
OBJECT-TYPE
Flow-template table which contains flow-template entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14not-accessiblecurrent
hwFlowtempEntry
OBJECT-TYPE
Configuration information of flow-template.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1not-accessiblecurrent
hwFlowtempIndex
OBJECT-TYPE
Index of flow template.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.1INTEGER {default(1), user-defined(2)}read-onlycurrent
hwFlowtempIpProtocol
OBJECT-TYPE
protocol-type of IP packet.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.2TruthValueread-createcurrent
hwFlowtempTcpFlag
OBJECT-TYPE
The flag of Tcp paceket.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.3TruthValueread-createcurrent
hwFlowtempSPort
OBJECT-TYPE
The port of source.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.4TruthValueread-createcurrent
hwFlowtempDPort
OBJECT-TYPE
The port of destination.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.5TruthValueread-createcurrent
hwFlowtempIcmpType
OBJECT-TYPE
The type of Icmp.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.6TruthValueread-createcurrent
hwFlowtempIcmpCode
OBJECT-TYPE
The code of Icmp.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.7TruthValueread-createcurrent
hwFlowtempFragment
OBJECT-TYPE
The flag of Fragment.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.8TruthValueread-createcurrent
hwFlowtempDscp
OBJECT-TYPE
Dscp of IP packet.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.9TruthValueread-createcurrent
hwFlowtempIpPre
OBJECT-TYPE
The Precedence of Ip packet.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.10TruthValueread-createcurrent
hwFlowtempTos
OBJECT-TYPE
Tos of IP packet.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.11TruthValueread-createcurrent
hwFlowtempSIp
OBJECT-TYPE
The Ip of source.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.12TruthValueread-createcurrent
hwFlowtempSIpMask
OBJECT-TYPE
The mask of source-Ip.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.13IpAddressread-createcurrent
hwFlowtempDIp
OBJECT-TYPE
The Ip of destination.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.14TruthValueread-createcurrent
hwFlowtempDIpMask
OBJECT-TYPE
The mask of destination-Ip.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.15IpAddressread-createcurrent
hwFlowtempEthProtocol
OBJECT-TYPE
Protocol type of Ethernet.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.16TruthValueread-createcurrent
hwFlowtempSMac
OBJECT-TYPE
The Mac of source.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.17TruthValueread-createcurrent
hwFlowtempSMacMask
OBJECT-TYPE
The mask of source-Mac.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.18MacAddressread-createcurrent
hwFlowtempDMac
OBJECT-TYPE
The mac of destination.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.19TruthValueread-createcurrent
hwFlowtempDMacMask
OBJECT-TYPE
The mask of destination-Mac.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.20MacAddressread-createcurrent
hwFlowtempVpn
OBJECT-TYPE
Vpn
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.21TruthValueread-createcurrent
hwFlowtempRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.22RowStatusread-createcurrent
hwFlowtempVlanId
OBJECT-TYPE
Source VLAN ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.23TruthValueread-createcurrent
hwFlowtempCos
OBJECT-TYPE
802.1P priority.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.24TruthValueread-createcurrent
hwFlowtempEnableTable
OBJECT-TYPE
The table of flow-template.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.15not-accessiblecurrent
hwFlowtempEnableEntry
OBJECT-TYPE
Enable entry of flow-template.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1not-accessiblecurrent
hwFlowtempEnableIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.1INTEGERread-createcurrent
hwFlowtempEnableVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.2INTEGER (0..4094)read-createcurrent
hwFlowtempEnableFlowtempIndex
OBJECT-TYPE
The index of Flowtemp table.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.3INTEGER {default(1), user-defined(2)}read-writecurrent
hwTrafficShapeTable
OBJECT-TYPE
The traffic-shape table which contains traffic-shape entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16not-accessiblecurrent
hwTrafficShapeEntry
OBJECT-TYPE
Configuration information of traffic-shape.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1not-accessiblecurrent
hwTrafficShapeIfIndex
OBJECT-TYPE
IfIdex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.1INTEGERread-createcurrent
hwTrafficShapeQueueId
OBJECT-TYPE
ID of queue which would be shaped.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.2INTEGER (0..7 | 255)read-createcurrent
hwTrafficShapeMaxRate
OBJECT-TYPE
The max rate.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.3INTEGERread-createcurrent
hwTrafficShapeBurstSize
OBJECT-TYPE
The size of burst.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.4INTEGERread-createcurrent
hwTrafficShapeBufferLimit
OBJECT-TYPE
The limit of buffer.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.5INTEGER (0 | 16..8000)read-createcurrent
hwTrafficShapeRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.6RowStatusread-createcurrent
hwPortQueueTable
OBJECT-TYPE
The port-queue table which contains port-queue entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17not-accessiblecurrent
hwPortQueueEntry
OBJECT-TYPE
Configuration information of port-queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1not-accessiblecurrent
hwPortQueueIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.1INTEGERread-onlycurrent
hwPortQueueQueueID
OBJECT-TYPE
ID of port-queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.2INTEGER (0..7)read-onlycurrent
hwPortQueueWrrPriority
OBJECT-TYPE
The priority of Wrr.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.3INTEGER {sp(1), wrr-high-priority(2), wrr-low-priority(3)}read-writecurrent
hwPortQueueWeight
OBJECT-TYPE
The weight of this queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.4INTEGER (0 | 1..255)read-writecurrent
hwDropModeTable
OBJECT-TYPE
The drop-mode table which contains drop-mode entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.18not-accessiblecurrent
hwDropModeEntry
OBJECT-TYPE
Configuration information of the drop-mode.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1not-accessiblecurrent
hwDropModeIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.1INTEGERread-onlycurrent
hwDropModeMode
OBJECT-TYPE
Mode.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.2INTEGER {random-detect(1), tail-drop(2)}read-writecurrent
hwDropModeWredIndex
OBJECT-TYPE
The index of Wred table.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.3INTEGER (0..3)read-writecurrent
hwWredTable
OBJECT-TYPE
The Wred table which contains wred Entry.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19not-accessiblecurrent
hwWredEntry
OBJECT-TYPE
Configuration information of Wred.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1not-accessiblecurrent
hwWredIndex
OBJECT-TYPE
Index of wred.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.1INTEGER (0..3)read-onlycurrent
hwWredQueueId
OBJECT-TYPE
Queue ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.2INTEGER (0..7)read-onlycurrent
hwWredGreenMinThreshold
OBJECT-TYPE
The min threshold of Green.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.3INTEGER (0..65535)read-writecurrent
hwWredGreenMaxThreshold
OBJECT-TYPE
The max threshold of Greem.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.4INTEGER (0..65535)read-writecurrent
hwWredGreenMaxProb
OBJECT-TYPE
The max prob of Green.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.5INTEGER (1..15)read-writecurrent
hwWredYellowMinThreshold
OBJECT-TYPE
The min threshold of Yellow.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.6INTEGER (0..65535)read-writecurrent
hwWredYellowMaxThreshold
OBJECT-TYPE
The max threshold of Yellow.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.7INTEGER (0..65535)read-writecurrent
hwWredYellowMaxProb
OBJECT-TYPE
The Prob threshold of Yellow.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.8INTEGER (1..15)read-writecurrent
hwWredRedMinThreshold
OBJECT-TYPE
The min threshold of Red.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.9INTEGER (0..65535)read-writecurrent
hwWredRedMaxThreshold
OBJECT-TYPE
The max threshold of Red.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.10INTEGER (0..65535)read-writecurrent
hwWredRedMaxProb
OBJECT-TYPE
The max prob of Red.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.11INTEGER (1..15)read-writecurrent
hwWredExponent
OBJECT-TYPE
Exponent.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.12INTEGER (1..15)read-writecurrent
hwCosToLocalPrecedenceMapTable
OBJECT-TYPE
Table of map of the COS to local-precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.20not-accessiblecurrent
hwCosToLocalPrecedenceMapEntry
OBJECT-TYPE
Configuration information of map of the COS to local precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1not-accessiblecurrent
hwCosToLocalPrecedenceMapCosIndex
OBJECT-TYPE
Index of the map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1.1INTEGER (0..7)read-onlycurrent
hwCosToLocalPrecedenceMapLocalPrecedenceValue
OBJECT-TYPE
Value of local precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1.2INTEGER (0..7)read-writecurrent
hwCosToDropPrecedenceMapTable
OBJECT-TYPE
The table of map of COS to drop-precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.21not-accessiblecurrent
hwCosToDropPrecedenceMapEntry
OBJECT-TYPE
Configuration information of the map of the COS to drop-precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1not-accessiblecurrent
hwCosToDropPrecedenceMapCosIndex
OBJECT-TYPE
Index of the map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1.1INTEGER (0..7)read-onlycurrent
hwCosToDropPrecedenceMapDropPrecedenceValue
OBJECT-TYPE
Value of drop-precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1.2INTEGER (0..2)read-writecurrent
hwDscpMapTable
OBJECT-TYPE
Table of dscp map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22not-accessiblecurrent
hwDscpMapEntry
OBJECT-TYPE
Configuration information of Dscp map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1not-accessiblecurrent
hwDscpMapConformLevel
OBJECT-TYPE
Conformable level of Dscp-map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.1INTEGER (0..2)read-onlycurrent
hwDscpMapDscpIndex
OBJECT-TYPE
Index of dscp.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.2INTEGER (0..63)read-onlycurrent
hwDscpMapDscpValue
OBJECT-TYPE
Value of Dscp.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.3INTEGER (0..63)read-writecurrent
hwDscpMapExpValue
OBJECT-TYPE
Exp value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.4INTEGER (0..7)read-writecurrent
hwDscpMapCosValue
OBJECT-TYPE
COS value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.5INTEGER (0..7)read-writecurrent
hwDscpMapLocalPrecedence
OBJECT-TYPE
The precedence of local.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.6INTEGER (0..7)read-writecurrent
hwDscpMapDropPrecedence
OBJECT-TYPE
The precedence of Drop.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.7INTEGER (0..2)read-writecurrent
hwExpMapTable
OBJECT-TYPE
The table of Exp-map
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23not-accessiblecurrent
hwExpMapEntry
OBJECT-TYPE
Configuration information of Exp-map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1not-accessiblecurrent
hwExpMapConformLevel
OBJECT-TYPE
Conformable level of Exp-map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.1INTEGER (0..2)read-onlycurrent
hwExpMapExpIndex
OBJECT-TYPE
Index of Exp.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.2INTEGER (0..7)read-onlycurrent
hwExpMapDscpValue
OBJECT-TYPE
Dscp value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.3INTEGER (0..63)read-writecurrent
hwExpMapExpValue
OBJECT-TYPE
Exp value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.4INTEGER (0..7)read-writecurrent
hwExpMapCosValue
OBJECT-TYPE
COS Value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.5INTEGER (0..7)read-writecurrent
hwExpMapLocalPrecedence
OBJECT-TYPE
The precedence of local.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.6INTEGER (0..7)read-writecurrent
hwExpMapDropPrecedence
OBJECT-TYPE
The precedence of Drop.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.7INTEGER (0..2)read-writecurrent
hwLocalPrecedenceMapTable
OBJECT-TYPE
The table of local-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.24not-accessiblecurrent
hwLocalPrecedenceMapEntry
OBJECT-TYPE
Configuraion information of local-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1not-accessiblecurrent
hwLocalPrecedenceMapConformLevel
OBJECT-TYPE
Conformable level of local-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.1INTEGER (0..2)read-onlycurrent
hwLocalPrecedenceMapLocalPrecedenceIndex
OBJECT-TYPE
Index of local-precedence.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.2INTEGER (0..7)read-writecurrent
hwLocalPrecedenceMapCosValue
OBJECT-TYPE
COS value.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.3INTEGER (0..7)read-writecurrent
hwPortWredTable
OBJECT-TYPE
The table of PortWred.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25not-accessiblecurrent
hwPortWredEntry
OBJECT-TYPE
Configuration information of port Wred.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1not-accessiblecurrent
hwPortWredIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.1INTEGERread-onlycurrent
hwPortWredQueueID
OBJECT-TYPE
ID of port-Wred queue.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.2INTEGER (0..7)read-onlycurrent
hwPortWredQueueStartLength
OBJECT-TYPE
Queue length.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.3INTEGER (0..2047)read-writecurrent
hwPortWredQueueProbability
OBJECT-TYPE
Probability.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.4INTEGER (0..100)read-writecurrent
hwMirroringGroupTable
OBJECT-TYPE
The table of MirrorGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26not-accessiblecurrent
hwMirroringGroupEntry
OBJECT-TYPE
Configuration information of MirrorGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1not-accessiblecurrent
hwMirroringGroupID
OBJECT-TYPE
GroupID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.1INTEGER (1..20)not-accessiblecurrent
hwMirroringGroupType
OBJECT-TYPE
GroupType.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.2INTEGER {local(1), remote-source(2), remote-destination(3)}read-createcurrent
hwMirroringGroupStatus
OBJECT-TYPE
MirroringGroup status.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
hwMirroringGroupRowStatus
OBJECT-TYPE
RowStatus, Now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.4RowStatusread-createcurrent
hwMirroringGroupMirrorTable
OBJECT-TYPE
MirroringGroup mirroring-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27not-accessiblecurrent
hwMirroringGroupMirrorEntry
OBJECT-TYPE
MirroringGroup mirroring-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1not-accessiblecurrent
hwMirroringGroupMirrorInboundIfIndexList
OBJECT-TYPE
Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList. Example A: hwMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hwMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hwMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hwMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hwMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HwMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hwMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hwMirroringGroupMirrorInTypeList is not supported, the first four octets of hwMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hwMirroringGroupMirrorOutboundIfIndexList and hwMirroringGroupMirrorOutTypeList are a pair and have the same relations like hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList pair.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.1OCTET STRINGread-createcurrent
hwMirroringGroupMirrorOutboundIfIndexList
OBJECT-TYPE
Outbound-Mirror ifIndex and slot number list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.2OCTET STRINGread-createcurrent
hwMirroringGroupMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.3RowStatusread-createcurrent
hwMirroringGroupMirrorInTypeList
OBJECT-TYPE
Inbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.4OCTET STRINGread-createcurrent
hwMirroringGroupMirrorOutTypeList
OBJECT-TYPE
Outbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.5OCTET STRINGread-createcurrent
hwMirroringGroupMonitorTable
OBJECT-TYPE
MirroringGroup monitor-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.28not-accessiblecurrent
hwMirroringGroupMonitorEntry
OBJECT-TYPE
MirroringGroup monitor-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1not-accessiblecurrent
hwMirroringGroupMonitorIfIndex
OBJECT-TYPE
If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hwMirroringGroupMonitorType.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.1INTEGERread-createcurrent
hwMirroringGroupMonitorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.2RowStatusread-createcurrent
hwMirroringGroupMonitorType
OBJECT-TYPE
Specify whether the monitor destination is port or board. If this object is not supported, then the value of hwMirroringGroupMonitorIfIndex means ifIndex.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.3HwMirrorOrMonitorTyperead-createcurrent
hwMirroringGroupReflectorTable
OBJECT-TYPE
MirroringGroup reflector-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.29not-accessiblecurrent
hwMirroringGroupReflectorEntry
OBJECT-TYPE
MirroringGroup reflector-port information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1not-accessiblecurrent
hwMirroringGroupReflectorIfIndex
OBJECT-TYPE
Only valid for remote-source MirroringGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1.1INTEGERread-createcurrent
hwMirroringGroupReflectorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1.2RowStatusread-createcurrent
hwMirroringGroupRprobeVlanTable
OBJECT-TYPE
MirroringGroup rprobe-vlan information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.30not-accessiblecurrent
hwMirroringGroupRprobeVlanEntry
OBJECT-TYPE
MirroringGroup rprobe-vlan information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1not-accessiblecurrent
hwMirroringGroupRprobeVlanID
OBJECT-TYPE
Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1.1INTEGER (0..4094)read-createcurrent
hwMirroringGroupRprobeVlanRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1.2RowStatusread-createcurrent
hwMirroringGroupMirrorMacTable
OBJECT-TYPE
MirroringGroup MAC information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31not-accessiblecurrent
hwMirroringGroupMirrorMacEntry
OBJECT-TYPE
MirroringGroup MAC information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1not-accessiblecurrent
hwMirroringGroupMirrorMacSeq
OBJECT-TYPE
The sequence MAC number of the same group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.1Integer32not-accessiblecurrent
hwMirroringGroupMirrorMac
OBJECT-TYPE
The MAC address of the MirroringGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.2MacAddressread-createcurrent
hwMirrorMacVlanID
OBJECT-TYPE
The vlan ID of MAC address .
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.3Integer32 (0..4094)read-createcurrent
hwMirroringGroupMirroMacStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.4RowStatusread-createcurrent
hwMirroringGroupMirrorVlanTable
OBJECT-TYPE
MirroringGroup Vlan Information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32not-accessiblecurrent
hwMirroringGroupMirrorVlanEntry
OBJECT-TYPE
MirroringGroup Vlan Information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1not-accessiblecurrent
hwMirroringGroupMirrorVlanSeq
OBJECT-TYPE
The sequence vlan number of the same group.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.1Integer32not-accessiblecurrent
hwMirroringGroupMirrorVlanID
OBJECT-TYPE
The vlan ID of MirroringGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.2Integer32 (0..4094)read-createcurrent
hwMirroringGroupMirrorVlanDirection
OBJECT-TYPE
The vlan direction of MirroringGroup.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.3INTEGER {inbound(1), outbound(2), both(3)}read-createcurrent
hwMirroringGroupMirroVlanStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.4RowStatusread-createcurrent
hwPortTrustTable
OBJECT-TYPE
Port trust information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33not-accessiblecurrent
hwPortTrustEntry
OBJECT-TYPE
Port trust information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1not-accessiblecurrent
hwPortTrustIfIndex
OBJECT-TYPE
ifIndex of the port which port trust is configured.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.1Integer32not-accessiblecurrent
hwPortTrustTrustType
OBJECT-TYPE
Trust type of port trust.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.2INTEGER {port(1), cos(2), dscp(3)}read-writecurrent
hwPortTrustOvercastType
OBJECT-TYPE
Overcast type of port trust.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.3INTEGER {noOvercast(1), overcastDSCP(2), overcastCOS(3)}read-writecurrent
hwPortTrustReset
OBJECT-TYPE
This object is used to reset port trust to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.4INTEGER {reset(1)}read-writecurrent
hwRemarkVlanIDTable
OBJECT-TYPE
Remark vlan ID information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34not-accessiblecurrent
hwRemarkVlanIDEntry
OBJECT-TYPE
Remark vlan ID information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1not-accessiblecurrent
hwRemarkVlanIDAclIndex
OBJECT-TYPE
Action identifier, acl index.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.1Integer32 (0..2999)not-accessiblecurrent
hwRemarkVlanIDIfIndex
OBJECT-TYPE
Action identifier, ifIndex.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.2Integer32not-accessiblecurrent
hwRemarkVlanIDVlanID
OBJECT-TYPE
Action identifier, vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.3Integer32 (0..4094)not-accessiblecurrent
hwRemarkVlanIDDirection
OBJECT-TYPE
Action identifier, direction of data stream.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.4INTEGER {invalid(0), input(1), output(2)}not-accessiblecurrent
hwRemarkVlanIDUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.5Integer32 (0 | 5000..5999 | 10000..12999)read-createcurrent
hwRemarkVlanIDUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.6Integer32 (0..65535)read-createcurrent
hwRemarkVlanIDIpAclNum
OBJECT-TYPE
The num of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.7Integer32 (0 | 2000..3999 | 10000..12999)read-createcurrent
hwRemarkVlanIDIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.8Integer32 (0..65535)read-createcurrent
hwRemarkVlanIDLinkAclNum
OBJECT-TYPE
The num of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.9Integer32 (0 | 4000..4999 | 10000..12999)read-createcurrent
hwRemarkVlanIDLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.10Integer32 (0..65535)read-createcurrent
hwRemarkVlanIDRemarkVlanID
OBJECT-TYPE
Remark vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.11Integer32 (0..4094)read-createcurrent
hwRemarkVlanIDPacketType
OBJECT-TYPE
Packet type of the remarked vlan ID.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.12INTEGER {all(1), tagged(2), untagged(3)}read-createcurrent
hwRemarkVlanIDRowStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.13RowStatusread-createcurrent
hwCosToDscpMapTable
OBJECT-TYPE
COS to DSCP map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.35not-accessiblecurrent
hwCosToDscpMapEntry
OBJECT-TYPE
COS to DSCP map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1not-accessiblecurrent
hwCosToDscpMapCosIndex
OBJECT-TYPE
COS index of COS to DSCP map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.1Integer32 (0..7)not-accessiblecurrent
hwCosToDscpMapDscpValue
OBJECT-TYPE
DSCP value of COS to DSCP map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.2Integer32 (0..63)read-writecurrent
hwCosToDscpMapReSet
OBJECT-TYPE
This object is used to reset COS to DSCP map to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.3INTEGER {reset(1)}read-writecurrent
hwDscpToLocalPreMapTable
OBJECT-TYPE
DSCP to Local-precedence map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.36not-accessiblecurrent
hwDscpToLocalPreMapEntry
OBJECT-TYPE
DSCP to Local-precedence map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1not-accessiblecurrent
hwDscpToLocalPreMapDscpIndex
OBJECT-TYPE
DSCP Index of DSCP to Local-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.1Integer32 (0..63)not-accessiblecurrent
hwDscpToLocalPreMapLocalPreVal
OBJECT-TYPE
Local-precedence value of DSCP to Local-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.2Integer32 (0..7)read-writecurrent
hwDscpToLocalPreMapReset
OBJECT-TYPE
This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.3INTEGER {reset(1)}read-writecurrent
hwDscpToDropPreMapTable
OBJECT-TYPE
DSCP to Drop-precedence map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.37not-accessiblecurrent
hwDscpToDropPreMapEntry
OBJECT-TYPE
DSCP to Drop-precedence map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1not-accessiblecurrent
hwDscpToDropPreMapDscpIndex
OBJECT-TYPE
DSCP Index of DSCP to Drop-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.1Integer32 (0..63)not-accessiblecurrent
hwDscpToDropPreMapDropPreVal
OBJECT-TYPE
Drop-precedence value of DSCP to Drop-precedence map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.2Integer32 (0..2)read-writecurrent
hwDscpToDropPreMapReset
OBJECT-TYPE
This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.3INTEGER {reset(1)}read-writecurrent
hwDscpToCosMapTable
OBJECT-TYPE
DSCP to COS map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.38not-accessiblecurrent
hwDscpToCosMapEntry
OBJECT-TYPE
DSCP to COS map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1not-accessiblecurrent
hwDscpToCosMapDscpIndex
OBJECT-TYPE
DSCP index of DSCP to COS map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.1Integer32 (0..63)not-accessiblecurrent
hwDscpToCosMapCosValue
OBJECT-TYPE
COS value of DSCP to COS map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.2Integer32 (0..7)read-writecurrent
hwDscpToCosMapReset
OBJECT-TYPE
This object is used to reset DSCP to COS map to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.3INTEGER {reset(1)}read-writecurrent
hwDscpToDscpMapTable
OBJECT-TYPE
DSCP to DSCP map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.39not-accessiblecurrent
hwDscpToDscpMapEntry
OBJECT-TYPE
DSCP to DSCP map information.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1not-accessiblecurrent
hwDscpToDscpMapDscpIndex
OBJECT-TYPE
DSCP index of DSCP to DSCP map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.1Integer32 (0..63)not-accessiblecurrent
hwDscpToDscpMapDscpValue
OBJECT-TYPE
DSCP value of DSCP to DSCP map.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.2Integer32 (0..63)read-writecurrent
hwDscpToDscpMapReset
OBJECT-TYPE
This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.
1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.3INTEGER {reset(1)}read-writecurrent