A3COM-HUAWEI-IPSEC-MONITOR-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.10.2.7
- Last updated
- 2004-10-26 00:00
- Organization
- Huawei-3COM Technologies Co., Ltd.
- Namespace
- 3com
- Source file
A3COM-HUAWEI-IPSEC-MONITOR-MIB- Digest
sha256:731e7481dd7cad3fdf48d1317a0ad571ee4c83b7b3b32e4dbfe8db37138efca9
Description
The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Contact
Huawei 3Com Technologies Co., Ltd. Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei-3com.com ZIP: 100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-IPSEC-MONITOR-MIB A3COM-HUAWEI-OID-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| H3cAuthAlgo TEXTUAL-CONVENTION The authentication algorithm used in the IKE negotiations. invalidAlg(2147483647) is defined as invalid value. | current | |||
| H3cDiffHellmanGrp TEXTUAL-CONVENTION The Diffie Hellman Group used in the IKE and IPSec negotiations. invalidGroup(2147483647) is defined as invalid value. | current | |||
| H3cEncapMode TEXTUAL-CONVENTION The encapsulation mode used by an IPSec Phase-2 Tunnel. invalidMode(2147483647) is defined as invalid value. | current | |||
| H3cEncryptAlgo TEXTUAL-CONVENTION The encryption algorithm used in the IKE and IPSec negotiations. invalidAlg(2147483647) is defined as invalid value. | current | |||
| H3cIPSecIDType TEXTUAL-CONVENTION The type of IPSec Identity. | current | |||
| H3cIPSecNegoType TEXTUAL-CONVENTION The type of key used by an IPSec Phase-2 Tunnel. invalidType(2147483647) is defined as invalid value. | current | |||
| H3cIPSecTunnelState TEXTUAL-CONVENTION The state of IPSec tunnel. | current | |||
| H3cSaProtocol TEXTUAL-CONVENTION The protocol of security association. | current | |||
| H3cTrafficType TEXTUAL-CONVENTION The type of the data flow. | current | |||
| H3cTrapStatus TEXTUAL-CONVENTION The switch which determines whether send a trap or not. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cIPSecObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1 | |||
| h3cIPSecTunnelTable OBJECT-TYPE The IPSec Phase-2 Tunnel Table. There is one entry in this table for each active IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1 | not-accessible | current | |
| h3cIPSecTunnelEntry OBJECT-TYPE Information about h3cIPSecTunnelTable. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1 | not-accessible | current | |
| h3cIPSecTunIfIndex OBJECT-TYPE The interface index( the ifIndex of ifTable ). | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cIPSecTunEntryIndex OBJECT-TYPE The index of IPSec policy applied in the interface. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.2 | Integer32 (1..2147483647) | not-accessible | current |
| h3cIPSecTunIndex OBJECT-TYPE The index of IPSec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.3 | Integer32 (1..2147483647) | not-accessible | current |
| h3cIPSecTunIKETunnelIndex OBJECT-TYPE The index of the associated IPSec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.4 | Integer32 (1..2147483647) | read-only | current |
| h3cIPSecTunLocalAddr OBJECT-TYPE The IP address of the local peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.5 | IpAddress | read-only | current |
| h3cIPSecTunRemoteAddr OBJECT-TYPE The IP address of the remote peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.6 | IpAddress | read-only | current |
| h3cIPSecTunKeyType OBJECT-TYPE The key negotiate mode used by the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.7 | H3cIPSecNegoType | read-only | current |
| h3cIPSecTunEncapMode OBJECT-TYPE The encapsulation mode used by the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.8 | H3cEncapMode | read-only | current |
| h3cIPSecTunInitiator OBJECT-TYPE The initiator of this IPSec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.9 | INTEGER {local(1), remote(2), none(2147483647)} | read-only | current |
| h3cIPSecTunLifeSize OBJECT-TYPE The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.10 | Gauge32 | read-only | current |
| h3cIPSecTunLifeTime OBJECT-TYPE The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.11 | Integer32 (1..2147483647) | read-only | current |
| h3cIPSecTunRemainTime OBJECT-TYPE The remain time of SA in seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.12 | Integer32 (0..2147483647) | read-only | current |
| h3cIPSecTunActiveTime OBJECT-TYPE The duration the IPSec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.13 | Integer32 (0..2147483647) | read-only | current |
| h3cIPSecTunRemainSize OBJECT-TYPE The remain LifeSize of SA in kilobytes. 0 is defined as invalid value. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.14 | Gauge32 | read-only | current |
| h3cIPSecTunTotalRefreshes OBJECT-TYPE The total number of security association refreshing performed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.15 | Counter32 | read-only | current |
| h3cIPSecTunCurrentSaInstances OBJECT-TYPE The number of security associations which are currently active or expiring. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.16 | Gauge32 | read-only | current |
| h3cIPSecTunInSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the inbound security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.17 | H3cEncryptAlgo | read-only | current |
| h3cIPSecTunInSaAhAuthAlgo OBJECT-TYPE The authentication algorithm used by the inbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.18 | H3cAuthAlgo | read-only | current |
| h3cIPSecTunInSaEspAuthAlgo OBJECT-TYPE The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.19 | H3cAuthAlgo | read-only | current |
| h3cIPSecTunDiffHellmanGrp OBJECT-TYPE The Diffie Hellman Group used by the security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.20 | H3cDiffHellmanGrp | read-only | current |
| h3cIPSecTunOutSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the outbound security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.21 | H3cEncryptAlgo | read-only | current |
| h3cIPSecTunOutSaAhAuthAlgo OBJECT-TYPE The authentication algorithm used by the outbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.22 | H3cAuthAlgo | read-only | current |
| h3cIPSecTunOutSaEspAuthAlgo OBJECT-TYPE The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.23 | H3cAuthAlgo | read-only | current |
| h3cIPSecTunPolicyName OBJECT-TYPE The policy name used by this IPSec tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.24 | DisplayString | read-only | current |
| h3cIPSecTunPolicyNum OBJECT-TYPE The sequence number of policy used by this IPSec tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.25 | Integer32 (1..2147483647) | read-only | current |
| h3cIPSecTunStatus OBJECT-TYPE The status of the IPSec Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.1.1.26 | INTEGER {initial(1), ready(2), rekeyed(3), closed(4)} | read-only | current |
| h3cIPSecTunnelStatTable OBJECT-TYPE The IPSec Phase-2 Tunnel Statistics Table. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2 | not-accessible | current | |
| h3cIPSecTunnelStatEntry OBJECT-TYPE Information about h3cIPSecTunnelStatTable. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1 | not-accessible | current | |
| h3cIPSecTunInOctets OBJECT-TYPE The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.1 | Counter64 | read-only | current |
| h3cIPSecTunInDecompOctets OBJECT-TYPE The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.2 | Counter64 | read-only | current |
| h3cIPSecTunInPkts OBJECT-TYPE The total number of packets received by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.3 | Counter64 | read-only | current |
| h3cIPSecTunInDropPkts OBJECT-TYPE The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.4 | Counter64 | read-only | current |
| h3cIPSecTunInReplayDropPkts OBJECT-TYPE The total number of packets dropped during receiving process due to Anti-Replay process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.5 | Counter32 | read-only | current |
| h3cIPSecTunInAuthFails OBJECT-TYPE The total number of inbound authentication's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.6 | Counter32 | read-only | current |
| h3cIPSecTunInDecryptFails OBJECT-TYPE The total number of inbound decryption's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.7 | Counter32 | read-only | current |
| h3cIPSecTunOutOctets OBJECT-TYPE The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.8 | Counter64 | read-only | current |
| h3cIPSecTunOutUncompOctets OBJECT-TYPE The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.9 | Counter64 | read-only | current |
| h3cIPSecTunOutPkts OBJECT-TYPE The total number of packets sent by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.10 | Counter64 | read-only | current |
| h3cIPSecTunOutDropPkts OBJECT-TYPE The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.11 | Counter64 | read-only | current |
| h3cIPSecTunOutEncryptFails OBJECT-TYPE The total number of outbound encryption's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.12 | Counter32 | read-only | current |
| h3cIPSecTunNoMemoryDropPkts OBJECT-TYPE The total number of packets dropped due to no enough memory by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.13 | Counter32 | read-only | current |
| h3cIPSecTunQueueFullDropPkts OBJECT-TYPE The total number of packets dropped due to queue full by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.14 | Counter32 | read-only | current |
| h3cIPSecTunInvalidLenDropPkts OBJECT-TYPE The total number of packets dropped due to invalid length packet by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.15 | Counter32 | read-only | current |
| h3cIPSecTunTooLongDropPkts OBJECT-TYPE The total number of packets dropped due to too long packet by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.16 | Counter32 | read-only | current |
| h3cIPSecTunInvalidSaDropPkts OBJECT-TYPE The total number of packets dropped due to invalid SA by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.2.1.17 | Counter32 | read-only | current |
| h3cIPSecSaTable OBJECT-TYPE The IPSec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3 | not-accessible | current | |
| h3cIPSecSaEntry OBJECT-TYPE Information about h3cIPSecSaTable. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1 | not-accessible | current | |
| h3cIPSecSaIndex OBJECT-TYPE The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPSec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cIPSecSaDirection OBJECT-TYPE The direction of the SA. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.2 | INTEGER {in(1), out(2)} | read-only | current |
| h3cIPSecSaValue OBJECT-TYPE The value of the SPI. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.3 | Unsigned32 (1..4294967295) | read-only | current |
| h3cIPSecSaProtocol OBJECT-TYPE The security protocol of the SA. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.4 | H3cSaProtocol | read-only | current |
| h3cIPSecSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.5 | H3cEncryptAlgo | read-only | current |
| h3cIPSecSaAuthAlgo OBJECT-TYPE The authentication algorithm used by the SA. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.6 | H3cAuthAlgo | read-only | current |
| h3cIPSecSaStatus OBJECT-TYPE The status of the SA. | 1.3.6.1.4.1.43.45.1.10.2.7.1.3.1.7 | INTEGER {active(1), expiring(2)} | read-only | current |
| h3cIPSecTrafficTable OBJECT-TYPE The IPSec Phase-2 Tunnel Traffic Table. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4 | not-accessible | current | |
| h3cIPSecTrafficEntry OBJECT-TYPE Information about h3cIPSecTrafficTable. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1 | not-accessible | current | |
| h3cIPSecTrafficLocalType OBJECT-TYPE The type of local peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.1 | H3cTrafficType | read-only | current |
| h3cIPSecTrafficLocalAddr1 OBJECT-TYPE The first specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet. If the local peer type is IP address range, then this is the value of beginning IP address of the range. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.2 | IpAddress | read-only | current |
| h3cIPSecTrafficLocalAddr2 OBJECT-TYPE The second specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet mask. If the local peer type is IP address range, then this is the value of ending IP address of the range. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.3 | IpAddress | read-only | current |
| h3cIPSecTrafficLocalProtocol OBJECT-TYPE The protocol number of the local peer's traffic. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.4 | Integer32 (0..255) | read-only | current |
| h3cIPSecTrafficLocalPort OBJECT-TYPE The port number of the local peer's traffic. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.5 | Integer32 (0..65535) | read-only | current |
| h3cIPSecTrafficRemoteType OBJECT-TYPE The type of remote peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.6 | H3cTrafficType | read-only | current |
| h3cIPSecTrafficRemoteAddr1 OBJECT-TYPE The first specification of remote peer's IP address. If the remote peer type is single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet. If the remote peer type is IP address range, then this is the value of beginning IP address of the range. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.7 | IpAddress | read-only | current |
| h3cIPSecTrafficRemoteAddr2 OBJECT-TYPE Single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote peer type is IP address range, then this is the value of ending IP address of the range. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.8 | IpAddress | read-only | current |
| h3cIPSecTrafficRemoteProtocol OBJECT-TYPE The protocol number of the remote peer's traffic. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.9 | Integer32 (0..255) | read-only | current |
| h3cIPSecTrafficRemotePort OBJECT-TYPE The port number of the remote peer's traffic. | 1.3.6.1.4.1.43.45.1.10.2.7.1.4.1.10 | Integer32 (0..65535) | read-only | current |
| h3cIPSecGlobalStats OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1.5 | |||
| h3cIPSecGlobalActiveTunnels OBJECT-TYPE The total number of currently active IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.1 | Gauge32 | read-only | current |
| h3cIPSecGlobalActiveSas OBJECT-TYPE The total number of currently active or expiring IPSec Phase-2 SA. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.2 | Gauge32 | read-only | current |
| h3cIPSecGlobalInOctets OBJECT-TYPE The total number of octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.3 | Counter64 | read-only | current |
| h3cIPSecGlobalInDecompOctets OBJECT-TYPE The total number of decompressed octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.4 | Counter64 | read-only | current |
| h3cIPSecGlobalInPkts OBJECT-TYPE The total number of packets received by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.5 | Counter64 | read-only | current |
| h3cIPSecGlobalInDrops OBJECT-TYPE The total number of packets dropped during receiving process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.6 | Counter64 | read-only | current |
| h3cIPSecGlobalInReplayDrops OBJECT-TYPE The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.7 | Counter32 | read-only | current |
| h3cIPSecGlobalInAuthFails OBJECT-TYPE The total number of inbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.8 | Counter32 | read-only | current |
| h3cIPSecGlobalInDecryptFails OBJECT-TYPE The total number of inbound decryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.9 | Counter32 | read-only | current |
| h3cIPSecGlobalOutOctets OBJECT-TYPE The total number of octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.10 | Counter64 | read-only | current |
| h3cIPSecGlobalOutUncompOctets OBJECT-TYPE The total number of uncompressed octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.11 | Counter64 | read-only | current |
| h3cIPSecGlobalOutPkts OBJECT-TYPE The total number of packets sent by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.12 | Counter64 | read-only | current |
| h3cIPSecGlobalOutDrops OBJECT-TYPE The total number of packets dropped during sending process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.13 | Counter64 | read-only | current |
| h3cIPSecGlobalOutEncryptFails OBJECT-TYPE The total number of outbound encryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.14 | Counter32 | read-only | current |
| h3cIPSecGlobalNoMemoryDropPkts OBJECT-TYPE The total number of packets dropped due to no enough memory by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.15 | Counter32 | read-only | current |
| h3cIPSecGlobalNoFindSaDropPkts OBJECT-TYPE The total number of packets dropped due to not find SA by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.16 | Counter32 | read-only | current |
| h3cIPSecGlobalQueueFullDropPkts OBJECT-TYPE The total number of packets dropped due to queue full by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.17 | Counter32 | read-only | current |
| h3cIPSecGlobalInvalidLenDropPkts OBJECT-TYPE The total number of packets dropped due to invalid packet length by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.18 | Counter32 | read-only | current |
| h3cIPSecGlobalTooLongDropPkts OBJECT-TYPE The total number of packets dropped due to too long packet by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.19 | Counter32 | read-only | current |
| h3cIPSecGlobalInvalidSaDropPkts OBJECT-TYPE The total number of packets dropped due to invalid SA by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.1.5.20 | Counter32 | read-only | current |
| h3cIPSecTrapObject OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1.6 | |||
| h3cIPSecPolicyName OBJECT-TYPE The IPSec policy name with a trap. | 1.3.6.1.4.1.43.45.1.10.2.7.1.6.1 | DisplayString | accessible-for-notify | current |
| h3cIPSecPolicySeqNum OBJECT-TYPE The IPSec policy sequence number with a trap. | 1.3.6.1.4.1.43.45.1.10.2.7.1.6.2 | Integer32 | accessible-for-notify | current |
| h3cIPSecPolicySize OBJECT-TYPE The number of IPSec policies with a trap. | 1.3.6.1.4.1.43.45.1.10.2.7.1.6.3 | Integer32 | accessible-for-notify | current |
| h3cIPSecSpiValue OBJECT-TYPE The SPI value associated with a trap. | 1.3.6.1.4.1.43.45.1.10.2.7.1.6.4 | Integer32 | accessible-for-notify | current |
| h3cIPSecTrapCntl OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1.7 | |||
| h3cIPSecTrapGlobalCntl OBJECT-TYPE Indicates whether all IPSec traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.1 | H3cTrapStatus | read-write | current |
| h3cIPSecTunnelStartTrapCntl OBJECT-TYPE Indicates whether h3cIPSecTunnelStart traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.2 | H3cTrapStatus | read-write | current |
| h3cIPSecTunnelStopTrapCntl OBJECT-TYPE Indicates whether h3cIPSecTunnelStop traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.3 | H3cTrapStatus | read-write | current |
| h3cIPSecNoSaTrapCntl OBJECT-TYPE Indicates whether h3cIPSecNoSaFailure traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.4 | H3cTrapStatus | read-write | current |
| h3cIPSecAuthFailureTrapCntl OBJECT-TYPE Indicates whether h3cIPSecAuthFailFailure traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.5 | H3cTrapStatus | read-write | current |
| h3cIPSecEncryFailureTrapCntl OBJECT-TYPE Indicates whether h3cIPSecEncryFailFailure traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.6 | H3cTrapStatus | read-write | current |
| h3cIPSecDecryFailureTrapCntl OBJECT-TYPE Indicates whether h3cIPSecDecryFailFailure traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.7 | H3cTrapStatus | read-write | current |
| h3cIPSecInvalidSaTrapCntl OBJECT-TYPE Indicates whether h3cIPSec Invalid Sa Failure traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.8 | H3cTrapStatus | read-write | current |
| h3cIPSecPolicyAddTrapCntl OBJECT-TYPE Indicates whether h3cIPSecPolicyAdd traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.9 | H3cTrapStatus | read-write | current |
| h3cIPSecPolicyDelTrapCntl OBJECT-TYPE Indicates whether h3cIPSecPolicyDel traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.10 | H3cTrapStatus | read-write | current |
| h3cIPSecPolicyAttachTrapCntl OBJECT-TYPE Indicates whether h3cIPSecPolicyAttach traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.11 | H3cTrapStatus | read-write | current |
| h3cIPSecPolicyDetachTrapCntl OBJECT-TYPE Indicates whether h3cIPSecPolicyDetach traps should be generated. | 1.3.6.1.4.1.43.45.1.10.2.7.1.7.12 | H3cTrapStatus | read-write | current |
| h3cIPSecTrap OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1.8 | |||
| h3cIPSecNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1 | |||
| h3cIPSecConformance OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.2 | |||
| h3cIPSecCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.2.1 | |||
| h3cIPSecGroups OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.7.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cIPSecTunnelStart NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 Tunnel is created. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.1 | current |
| h3cIPSecTunnelStop NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 Tunnel is deleted. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.2 | current |
| h3cIPSecNoSaFailure NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 non-existent SA error occurs. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.3 | current |
| h3cIPSecAuthFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 authentication failure occurs. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.4 | current |
| h3cIPSecEncryFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 tunnel has an encrypting failure. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.5 | current |
| h3cIPSecDecryFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 tunnel has a decrypting failure. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.6 | current |
| h3cIPSecInvalidSaFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 invalid SA failure occurs. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.7 | current |
| h3cIPSecPolicyAdd NOTIFICATION-TYPE This notification is generated when an IPSec policy is added. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.8 | current |
| h3cIPSecPolicyDel NOTIFICATION-TYPE This notification is generated when an IPSec policy is deleted. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.9 | current |
| h3cIPSecPolicyAttach NOTIFICATION-TYPE This notification is generated when an IPSec policy is attached with one interface. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.10 | current |
| h3cIPSecPolicyDetach NOTIFICATION-TYPE This notification is generated when an IPSec policy is detached with one interface. | 1.3.6.1.4.1.43.45.1.10.2.7.1.8.1.11 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| h3cIPSecCompliance MODULE-COMPLIANCE | 1.3.6.1.4.1.43.45.1.10.2.7.2.1.1 | current |
| h3cIPSecTunnelTableGroup OBJECT-GROUP The group contains the IPSec tunnel's property information. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.1 | current |
| h3cIPSecTunnelStatGroup OBJECT-GROUP The group contains the IPSec tunnel's statistic information. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.2 | current |
| h3cIPSecSaGroup OBJECT-GROUP The group contains the SA's property information. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.3 | current |
| h3cIPSecTrafficTableGroup OBJECT-GROUP The group contains the property information of the data flow protected by IPSec tunnel. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.4 | current |
| h3cIPSecGlobalStatsGroup OBJECT-GROUP The group contains all of the IPSec tunnel's statistic information. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.5 | current |
| h3cIPSecTrapObjectGroup OBJECT-GROUP The group contains all of trap objects of IPSec tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.6 | current |
| h3cIPSecTrapCntlGroup OBJECT-GROUP The group contains all of trap switches of IPSec tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.7 | current |
| h3cIPSecTrapGroup NOTIFICATION-GROUP The group contains all of trap of IPSec tunnels. | 1.3.6.1.4.1.43.45.1.10.2.7.2.2.8 | current |