A3COM-HUAWEI-IF-EXT-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.10.2.40
- Last updated
- 2009-05-06 19:36
- Organization
- Hangzhou H3C Technologies Co., Ltd.
- Revisions
- 2009-05-06 19:36, 2004-11-13 19:36
- Namespace
- 3com
- Source file
A3COM-HUAWEI-IF-EXT-MIB- Digest
sha256:21652a957d89384422b5d65c62e61257e8ba5fb36c7dec57ddb66d3d969c01b7
Description
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
Contact
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | ifDescr, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-IF-EXT-MIB A3COM-HUAWEI-OID-MIB HCNUM-TC IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cIfExtScalarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.1 | |||
| h3cIfStatGlobalFlowInterval OBJECT-TYPE Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function. | 1.3.6.1.4.1.43.45.1.10.2.40.1.1 | Integer32 | read-write | current |
| h3cIfExtGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2 | |||
| h3cIfStat OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2.1 | |||
| h3cIfStatScalarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.1 | |||
| h3cIfStatTable OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2 | |||
| h3cIfFlowStatTable OBJECT-TYPE This table contains objects to get statistic information of interfaces on a device. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1 | not-accessible | current | |
| h3cIfStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1 | not-accessible | current | |
| h3cIfStatFlowInterval OBJECT-TYPE Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.1 | Integer32 | read-write | current |
| h3cIfStatFlowInBits OBJECT-TYPE In bits in the specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.2 | Unsigned32 | read-only | current |
| h3cIfStatFlowOutBits OBJECT-TYPE Out bits in specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.3 | Unsigned32 | read-only | current |
| h3cIfStatFlowInPkts OBJECT-TYPE In Packets in the specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.4 | Unsigned32 | read-only | current |
| h3cIfStatFlowOutPkts OBJECT-TYPE Out packets in the specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.5 | Unsigned32 | read-only | current |
| h3cIfStatFlowInBytes OBJECT-TYPE In bytes in the specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.6 | Unsigned32 | read-only | current |
| h3cIfStatFlowOutBytes OBJECT-TYPE Out bytes in the specific interval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.7 | Unsigned32 | read-only | current |
| h3cIfSpeedStatTable OBJECT-TYPE This table contains objects to get average speed information in the specific interval of interfaces on a device. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2 | not-accessible | current | |
| h3cIfSpeedStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1 | not-accessible | current | |
| h3cIfSpeedStatInterval OBJECT-TYPE Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.1 | Integer32 | read-write | current |
| h3cIfSpeedStatInPkts OBJECT-TYPE Average of input packets per second in the specific interval by h3cIfSpeedStatInterval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.2 | Unsigned32 | read-only | current |
| h3cIfSpeedStatOutPkts OBJECT-TYPE Average of output packets per second in the specific interval by h3cIfSpeedStatInterval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.3 | Unsigned32 | read-only | current |
| h3cIfSpeedStatInBytes OBJECT-TYPE Average of input bytes per second in the specific interval by h3cIfSpeedStatInterval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.4 | Unsigned32 | read-only | current |
| h3cIfSpeedStatOutBytes OBJECT-TYPE Average of output bytes per second in the specific interval by h3cIfSpeedStatInterval. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.5 | Unsigned32 | read-only | current |
| h3cIfHCFlowStatTable OBJECT-TYPE This table contains objects to get statistic information of interfaces on a device. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3 | not-accessible | current | |
| h3cIfHCFlowStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1 | not-accessible | current | |
| h3cIfStatFlowHCInBits OBJECT-TYPE In bits in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBits. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.1 | CounterBasedGauge64 | read-only | current |
| h3cIfStatFlowHCOutBits OBJECT-TYPE Out bits in specific interval. This object is a 64-bit version of h3cIfStatFlowOutBits. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.2 | CounterBasedGauge64 | read-only | current |
| h3cIfStatFlowHCInPkts OBJECT-TYPE In Packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowInPkts. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.3 | CounterBasedGauge64 | read-only | current |
| h3cIfStatFlowHCOutPkts OBJECT-TYPE Out packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutPkts. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.4 | CounterBasedGauge64 | read-only | current |
| h3cIfStatFlowHCInBytes OBJECT-TYPE In bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBytes. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.5 | CounterBasedGauge64 | read-only | current |
| h3cIfStatFlowHCOutBytes OBJECT-TYPE Out bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutBytes. | 1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.6 | CounterBasedGauge64 | read-only | current |
| h3cIfControl OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2.2 | |||
| h3cRTParentIfTable OBJECT-TYPE This table contains all interfaces that can create sub interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.1 | not-accessible | current | |
| h3cRTParentIfEntry OBJECT-TYPE This entry describes a interface that can create sub interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1 | not-accessible | current | |
| h3cRTParentIfIndex OBJECT-TYPE The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.1 | Integer32 | not-accessible | current |
| h3cRTMinSubIfOrdinal OBJECT-TYPE The minimum ordinal of the sub interface can be created. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.2 | Integer32 | read-only | current |
| h3cRTMaxSubIfOrdinal OBJECT-TYPE The max ordinal of the sub interface can be created. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.3 | Integer32 | read-only | current |
| h3cRTSubIfTable OBJECT-TYPE This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal must be in the range between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface from h3cRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2 | not-accessible | current | |
| h3cRTSubIfEntry OBJECT-TYPE The h3cRTSubIfTable entry items | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1 | not-accessible | current | |
| h3cRTSubIfParentIfIndex OBJECT-TYPE The parent interface index. The value should be the same as the h3cRTParentIfIndex. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.1 | Integer32 | not-accessible | current |
| h3cRTSubIfOrdinal OBJECT-TYPE The ordinal of sub interface. It should between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.2 | Integer32 | not-accessible | current |
| h3cRTSubIfSubIfIndex OBJECT-TYPE The ifIndex value of the sub interface | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.3 | Integer32 | read-only | current |
| h3cRTSubIfSubIfDesc OBJECT-TYPE The name of the interface | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.4 | DisplayString (SIZE(0..255)) | read-only | current |
| h3cRTSubIfRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.5 | RowStatus | read-create | current |
| h3cIfLinkModeTable OBJECT-TYPE This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.3 | not-accessible | current | |
| h3cIfLinkModeEntry OBJECT-TYPE The interface link mode table entry | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1 | not-accessible | current | |
| h3cIfLinkModeIndex OBJECT-TYPE The value is same as ifIndex. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.1 | Integer32 | not-accessible | current |
| h3cIfLinkMode OBJECT-TYPE The current link mode of the interface If h3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.2 | INTEGER {bridgeMode(1), routeMode(2)} | read-write | current |
| h3cIfLinkModeSwitchSupport OBJECT-TYPE Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode. | 1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.3 | TruthValue | read-only | current |
| h3cIfInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.2.3 | |||
| h3cIfPhysicalNumber OBJECT-TYPE Represents the number of physical interfaces in the device. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.1 | Integer32 | read-only | current |
| h3cIfTable OBJECT-TYPE A list of interface entries. The number of entries is given by the value of IfNumber. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2 | not-accessible | current | |
| h3cIfEntry OBJECT-TYPE An entry containing management information applicable to a particular interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1 | not-accessible | current | |
| h3cIfUpDownTimes OBJECT-TYPE The interface's up/down times, since the device was initialized. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.1 | Integer32 | read-only | current |
| h3cIfMtu OBJECT-TYPE The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.2 | Integer32 | read-write | current |
| h3cIfBandwidthRate OBJECT-TYPE The rate of the bandwidth for an interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.3 | Integer32 (0..100) | read-only | current |
| h3cIfDiscardPktRate OBJECT-TYPE The rate of the discarded packets for an interface. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.4 | Integer32 (0..100) | read-only | current |
| h3cIfStatusKeepTime OBJECT-TYPE The time since the interface entered its current operational state. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.5 | TimeTicks | read-only | current |
| h3cIfInNUcastPkts OBJECT-TYPE The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.6 | Counter64 | read-only | current |
| h3cIfOutNUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.7 | Counter64 | read-only | current |
| h3cIfIsPoe OBJECT-TYPE Whether the interface supports poe. | 1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.8 | TruthValue | read-only | current |
| h3cIfExtTrap OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.3 | |||
| h3cIfExtTrapPrex OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.3.0 | |||
| h3cIfExtTrapObject OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.40.3.1 | |||
| h3cIfExtTrapCfgTable OBJECT-TYPE The trap configuration table. | 1.3.6.1.4.1.43.45.1.10.2.40.3.1.1 | not-accessible | current | |
| h3cIfExtTrapCfgEntry OBJECT-TYPE An entry for this table. | 1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1 | not-accessible | current | |
| h3cIfBandwidthUpperLimit OBJECT-TYPE The rate of the bandwidth upper limit for an interface. | 1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.1 | Integer32 (1..100) | read-write | current |
| h3cIfDiscardPktRateUpperLimit OBJECT-TYPE The rate of the discarded packets upper limit for an interface. | 1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.2 | Integer32 (1..100) | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cIfBandwidthUsageHigh NOTIFICATION-TYPE The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. | 1.3.6.1.4.1.43.45.1.10.2.40.3.0.1 | current |
| h3cIfDiscardPktRateHigh NOTIFICATION-TYPE The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. | 1.3.6.1.4.1.43.45.1.10.2.40.3.0.2 | current |