MIBs Depot

A3COM-HUAWEI-DOT11S-MESH-MIB

Registered at
1.3.6.1.4.1.43.45.1.10.2.75.11
Last updated
2009-08-01 10:00
Organization
Hangzhou H3C Technologies Co., Ltd.
Revisions
2009-08-01 10:00, 2008-11-07 10:00, 2008-07-08 18:00
Namespace
3com
Source file
A3COM-HUAWEI-DOT11S-MESH-MIB
Digest
sha256:d476d2199db689ba212e70a115e22e7c555219c14bf4aa926333596434bcf5df

Description

The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.

Contact

Platform Team Hangzhou H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085

Imports

FromSymbols
A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioElementIndex, h3cDot11, h3cDot11APElementIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

A3COM-HUAWEI-DOT11-REF-MIB
A3COM-HUAWEI-DOT11S-MESH-MIB
A3COM-HUAWEI-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cDot11sConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.75.11.1
h3cDot11sMeshGlobalPara
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.75.11.1.1
h3cDot11sMeshMkdID
OBJECT-TYPE
This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.1.1MacAddressread-writecurrent
h3cDot11sMeshPflTable
OBJECT-TYPE
This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except h3cDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2not-accessiblecurrent
h3cDot11sMeshPflEntry
OBJECT-TYPE
Each entry contains information of a mesh profile.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1not-accessiblecurrent
h3cDot11sMeshPflIndex
OBJECT-TYPE
This object represents the index of the mesh profile.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.1Integer32not-accessiblecurrent
h3cDot11sMeshPflMeshID
OBJECT-TYPE
This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, h3cDot11sMeshPflEnable can not be set to 'true'.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.2OCTET STRING (SIZE(0..32))read-createcurrent
h3cDot11sMeshPflBindIntNum
OBJECT-TYPE
This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of h3cDot11sMeshPflEnable can not be set to 'true'.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.3Integer32read-createcurrent
h3cDot11sMeshPflKeepAlive
OBJECT-TYPE
This object represents the mesh link keep-alive interval.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.4Integer32 (1..1800)read-createcurrent
h3cDot11sMeshPflBackhaulRate
OBJECT-TYPE
This object represents the link backhaul rate.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.5Integer32read-createcurrent
h3cDot11sMeshMkdServEnable
OBJECT-TYPE
This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.6TruthValueread-createcurrent
h3cDot11sMeshPflEnable
OBJECT-TYPE
This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.7TruthValueread-createcurrent
h3cDot11sMeshPflRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.8RowStatusread-createcurrent
h3cDot11sMpPlcyTable
OBJECT-TYPE
This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3not-accessiblecurrent
h3cDot11sMpPlcyEntry
OBJECT-TYPE
Each entry contains information of a MP policy.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1not-accessiblecurrent
h3cDot11sMpPlcyIndex
OBJECT-TYPE
This object represents the MP policy index.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.1Integer32not-accessiblecurrent
h3cDot11sMpPlcyName
OBJECT-TYPE
This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.2OCTET STRING (SIZE(1..15))read-createcurrent
h3cDot11sMpPlcyInitEnable
OBJECT-TYPE
This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.3TruthValueread-createcurrent
h3cDot11sMlspEnable
OBJECT-TYPE
This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.4TruthValueread-createcurrent
h3cDot11sProbReqInterval
OBJECT-TYPE
This object represents the probe request interval.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.5Integer32read-createcurrent
h3cDot11sRoleAuthEnable
OBJECT-TYPE
This object indicates whether the device can play as the role of an authenticator.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.6TruthValueread-createcurrent
h3cDot11sLinkHoldRSSI
OBJECT-TYPE
This object represents the link-hold receive signal strength indicator (RSSI).
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.7Integer32 (5..100)read-createcurrent
h3cDot11sLinkHoldTime
OBJECT-TYPE
This object represents the link-hold time.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.8Integer32 (1000..20000)read-createcurrent
h3cDot11sSwitchMargin
OBJECT-TYPE
This object represents the link-switch margin.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.9Integer32 (1..100)read-createcurrent
h3cDot11sLinkSaturationRSSI
OBJECT-TYPE
This object represents the link saturation receive signal strength indicator (RSSI).
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.10Integer32 (30..150)read-createcurrent
h3cDot11sLinkRateMode
OBJECT-TYPE
This object represents the rate mode of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.11INTEGER {fixed(1), realtime(2)}read-createcurrent
h3cDot11sMaxLinkNum
OBJECT-TYPE
This object represents the maximum number of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.12Integer32read-createcurrent
h3cDot11sMpPlcyRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.3.1.13RowStatusread-createcurrent
h3cDot11sMlspCfgTable
OBJECT-TYPE
This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.4not-accessiblecurrent
h3cDot11sMlspCfgEntry
OBJECT-TYPE
Each entry contains information of MLSP proxy MAC address.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.4.1not-accessiblecurrent
h3cDot11sMlspProxyIndex
OBJECT-TYPE
This object represents the MLSP proxy MAC address index.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.4.1.1Integer32not-accessiblecurrent
h3cDot11sMlspProxyMac
OBJECT-TYPE
This object represents the MLSP proxy MAC address.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.4.1.2MacAddressread-createcurrent
h3cDot11sMlspRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.4.1.3RowStatusread-createcurrent
h3cDot11sRadioCfgTable
OBJECT-TYPE
This table is used to configure mesh to the specified radio.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.5not-accessiblecurrent
h3cDot11sRadioCfgEntry
OBJECT-TYPE
Each entry contains mesh configure information of the specified radio.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.5.1not-accessiblecurrent
h3cDot11sCfgRadioIndex
OBJECT-TYPE
Represents index of the radio.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.5.1.1H3cDot11RadioElementIndexnot-accessiblecurrent
h3cDot11sMeshPflMap
OBJECT-TYPE
This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.5.1.2Integer32read-writecurrent
h3cDot11sMpPlcyMap
OBJECT-TYPE
This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.5.1.3Integer32read-writecurrent
h3cDot11sAPCfgTable
OBJECT-TYPE
This table is used to configure mesh to the specified AP.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.6not-accessiblecurrent
h3cDot11sAPCfgEntry
OBJECT-TYPE
Each entry contains mesh configure information of the specified AP.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.6.1not-accessiblecurrent
h3cDot11sPortalEnable
OBJECT-TYPE
This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.
1.3.6.1.4.1.43.45.1.10.2.75.11.1.6.1.1TruthValueread-writecurrent
h3cDot11sWDSConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.75.11.2
h3cDot11sWDSPeerMacTable
OBJECT-TYPE
This table is used to configure wireless distribution system (WDS). The row of this table can not be modified.
1.3.6.1.4.1.43.45.1.10.2.75.11.2.1not-accessiblecurrent
h3cDot11sWDSPeerMacEntry
OBJECT-TYPE
Each entry contains information of WDS.
1.3.6.1.4.1.43.45.1.10.2.75.11.2.1.1not-accessiblecurrent
h3cDot11sWDSPeerMacIndex
OBJECT-TYPE
This object represents the peer MAC address index.
1.3.6.1.4.1.43.45.1.10.2.75.11.2.1.1.1Integer32not-accessiblecurrent
h3cDot11sWDSPeerMacAddrss
OBJECT-TYPE
This object represents the peer MAC address.
1.3.6.1.4.1.43.45.1.10.2.75.11.2.1.1.2MacAddressread-createcurrent
h3cDot11sWDSPeerMacRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.43.45.1.10.2.75.11.2.1.1.3RowStatusread-createcurrent
h3cDot11sMeshStatusGroup
OBJECT-IDENTITY
1.3.6.1.4.1.43.45.1.10.2.75.11.3
h3cDot11sMeshLinkStatusTable
OBJECT-TYPE
This table is used to represent the status of mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1not-accessiblecurrent
h3cDot11sMeshLinkStatusEntry
OBJECT-TYPE
Each entry contains status information of mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1not-accessiblecurrent
h3cDot11sMeshLinkIfIndex
OBJECT-TYPE
This object represents the interface index of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1.1Unsigned32not-accessiblecurrent
h3cDot11sMeshLinkName
OBJECT-TYPE
This object represents the name of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1.2OCTET STRINGread-onlycurrent
h3cDot11sMeshLinkBSSID
OBJECT-TYPE
This object represents the BSS ID of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1.3MacAddressread-onlycurrent
h3cDot11sMeshLinkPeerMac
OBJECT-TYPE
This object represents the peer MAC address of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1.4MacAddressread-onlycurrent
h3cDot11sMeshLinkExistDuration
OBJECT-TYPE
This object represents the time for which the link has been up.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.1.1.5Integer32read-onlycurrent
h3cDot11sMeshLinkStatisTable
OBJECT-TYPE
This table is used to represent the statistical information of mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2not-accessiblecurrent
h3cDot11sMeshLinkStatisEntry
OBJECT-TYPE
Each entry contains statistical information of mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1not-accessiblecurrent
h3cDot11sMeshLinkStatIfIndex
OBJECT-TYPE
This object represents the interface index of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.1Unsigned32not-accessiblecurrent
h3cDot11sMeshLinkNbrIndex
OBJECT-TYPE
Represents the neighbor index of the mesh link.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.2Unsigned32read-onlycurrent
h3cDot11sMeshLinkRxTotByte
OBJECT-TYPE
Represents the amount of bytes that the mesh link received.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.3Counter32read-onlycurrent
h3cDot11sMeshLinkRxTotPkt
OBJECT-TYPE
Represents the amount of packets that the mesh link received.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.4Counter32read-onlycurrent
h3cDot11sMeshLinkRxUniPkt
OBJECT-TYPE
Represents the amount of unicast packets that the mesh link received.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.5Counter32read-onlycurrent
h3cDot11sMeshLinkRxBrocPkt
OBJECT-TYPE
Represents the amount of broadcast packets that the mesh link received.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.6Counter32read-onlycurrent
h3cDot11sMeshLinkRxMuticPkt
OBJECT-TYPE
Represents the amount of multicast packets that the mesh link received.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.7Counter32read-onlycurrent
h3cDot11sMeshLinkRxDiscPkt
OBJECT-TYPE
Represents the amount of packets that the mesh link discarded.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.8Counter32read-onlycurrent
h3cDot11sMeshLinkTxTotByte
OBJECT-TYPE
Represents the total amount of bytes that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.9Counter32read-onlycurrent
h3cDot11sMeshLinkTxTotPkt
OBJECT-TYPE
Represents the total amount of packets that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.10Counter32read-onlycurrent
h3cDot11sMeshLinkTxUniPkt
OBJECT-TYPE
Represents the amount of unicast packets that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.11Counter32read-onlycurrent
h3cDot11sMeshLinkTxBrocPkt
OBJECT-TYPE
Represents the amount of broadcast packets that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.12Counter32read-onlycurrent
h3cDot11sMeshLinkTxMuticPkt
OBJECT-TYPE
Represents the amount of multicast packets that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.13Counter32read-onlycurrent
h3cDot11sMeshLinkTxDiscPkt
OBJECT-TYPE
Represents the amount of discarded packets that the mesh link transmitted.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.14Counter32read-onlycurrent
h3cDot11sMeshLinkIFName
OBJECT-TYPE
Represents the name of mesh link interface.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.2.1.15OCTET STRINGread-onlycurrent
h3cDot11sMeshNbrStatusTable
OBJECT-TYPE
This table represents the status information for the neighbors of MP.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3not-accessiblecurrent
h3cDot11sMeshNbrStatusEntry
OBJECT-TYPE
Each entry of the table will provide status information for the neighbors of MP.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1not-accessiblecurrent
h3cDot11sMeshNbrIndex
OBJECT-TYPE
Represents the index for the neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.1Unsigned32not-accessiblecurrent
h3cDot11sMeshNbrRadioID
OBJECT-TYPE
Represents the radio ID of the neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.2Unsigned32read-onlycurrent
h3cDot11sMeshLocalMeshID
OBJECT-TYPE
Represents the local mesh ID.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
h3cDot11sMeshNbrMeshID
OBJECT-TYPE
Represents the mesh ID of the neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.4OCTET STRING (SIZE(0..32))read-onlycurrent
h3cDot11sMeshNbrBSSID
OBJECT-TYPE
Represents the BSS ID of the neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.5MacAddressread-onlycurrent
h3cDot11sMeshNbrPeerMac
OBJECT-TYPE
Represents the MAC address of the peer neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.6MacAddressread-onlycurrent
h3cDot11sMeshLinkInMp
OBJECT-TYPE
Represents the interface index of mesh link that used to connect with this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.7Unsigned32read-onlycurrent
h3cDot11sMeshMPLinkStatus
OBJECT-TYPE
Represents the status of mesh link that used to connect with this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.8INTEGER {processing(1), up(2), down(3)}read-onlycurrent
h3cDot11sMeshNbrChannel
OBJECT-TYPE
Represents the channel number used by this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.9Unsigned32read-onlycurrent
h3cDot11sMeshNbrLinkDuration
OBJECT-TYPE
Represents the duration of mesh link that used to connect with this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.10Integer32read-onlycurrent
h3cDot11sMeshNbrRSSI
OBJECT-TYPE
Represents the RSSI of mesh link that used to connect with this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.11Integer32read-onlycurrent
h3cDot11sMeshNbrSNR
OBJECT-TYPE
Represents the SNR of mesh link that used to connect with this neighbor.
1.3.6.1.4.1.43.45.1.10.2.75.11.3.3.1.12Integer32read-onlycurrent