A3COM-HUAWEI-DOT11-CFGEXT-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.10.2.75.6
- Last updated
- 2010-06-02 14:00
- Organization
- HUAWEI-3COM Technologies Co., Ltd.
- Revisions
- 2010-06-02 14:00, 2007-04-25 20:00
- Namespace
- 3com
- Source file
A3COM-HUAWEI-DOT11-CFGEXT-MIB- Digest
sha256:89f8e79876eaedd429f0c92c6b1346397290766ca36d58ca419563e25f26fabb
Description
This MIB provides information for WLAN configuration extended. The h3c-dot11-cfg.mib define MIB objects for WLAN basic configuration, while this MIB will define MIB objects for load balance these kinds feature. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
Contact
Platform Team HUAWEI-3COM Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.huawei-3com.com Zip:100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-DOT11-REF-MIB | h3cDot11 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-DOT11-CFGEXT-MIB A3COM-HUAWEI-DOT11-REF-MIB A3COM-HUAWEI-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cDot11LoadBalance OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.6.1 | |||
| h3cDot11LBGlobalGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1 | |||
| h3cDot11LoadBalanceTrafficEnable OBJECT-TYPE Represents whether enable load balancing according to station traffic. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.1 | TruthValue | read-write | current |
| h3cDot11LoadBalanceTrafficThres OBJECT-TYPE Represents the threshold value for Traffic based load balancing. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.2 | Integer32 | read-write | current |
| h3cDot11LoadBalanceSessionEnable OBJECT-TYPE Represents whether enable load balancing according to station session number. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.3 | TruthValue | read-write | current |
| h3cDot11LoadBalanceSessionThres OBJECT-TYPE Represents the threshold value for session number based load balancing. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.4 | Integer32 | read-write | current |
| h3cDot11LoadBalanceTrafficGap OBJECT-TYPE Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold and session gap are exceeded. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.5 | Integer32 (10..40) | read-write | current |
| h3cDot11LoadBalanceSessionGap OBJECT-TYPE Session gap threshold. Load balancing is carried out for a radio when the session threshold and session gap are exceeded. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.6 | Integer32 (1..8) | read-write | current |
| h3cDot11LBTrafficThresKbps OBJECT-TYPE Represents the threshold value for Traffic based load balancing. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.7 | Integer32 | read-write | current |
| h3cDot11LBTrafficGapKbps OBJECT-TYPE Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold gap are exceeded. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.1.8 | Integer32 | read-write | current |
| h3cDot11LBRadioGroupTable OBJECT-TYPE This table defines load balance radio group. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2 | not-accessible | current | |
| h3cDot11LBRadioGroupEntry OBJECT-TYPE Each entry contains information of one load balance radio group. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1 | not-accessible | current | |
| h3cDot11LBRadioGroupId OBJECT-TYPE Represents load balance radio group ID. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.1 | Unsigned32 | not-accessible | current |
| h3cDot11LBRadioGroupDesc OBJECT-TYPE Represents the description of load balance radio group. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.2 | OCTET STRING | read-create | current |
| h3cDot11LBRadioGroupRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.43.45.1.10.2.75.6.1.2.1.3 | RowStatus | read-create | current |