A3COM-HUAWEI-DOT11-ACMT-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.10.2.75.1
- Last updated
- 2010-08-04 18:00
- Organization
- Hangzhou H3C Technologies Co., Ltd.
- Revisions
- 2010-08-04 18:00, 2009-08-07 18:00, 2009-07-29 18:00, 2009-05-07 20:00, 2008-07-09 18:00, 2007-12-21 18:00, 2007-06-19 18:00, 2007-04-27 20:00, 2006-05-10 19:00
- Namespace
- 3com
- Source file
A3COM-HUAWEI-DOT11-ACMT-MIB- Digest
sha256:146f58dc834ef513d76e731943db5697d0c4ece409b127d799c29768ae5691dc
Description
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Contact
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-DOT11-REF-MIB | H3cDot11MACModeType, H3cDot11ObjectIDType, H3cDot11TunnelSecSchemType, h3cDot11 |
| IANAifType-MIB | IANAifType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-DOT11-ACMT-MIB A3COM-HUAWEI-DOT11-REF-MIB A3COM-HUAWEI-OID-MIB IANAifType-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cDot11ACObjectGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1 | |||
| h3cDot11ACObject OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.1 | |||
| h3cDot11CurrentACMACMode OBJECT-TYPE Represents which MAC mode defined in the CAPWAP draft is in use for the AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.1 | H3cDot11MACModeType | read-only | current |
| h3cDot11MaxAPNumPermitted OBJECT-TYPE Represents the maximum number of AP connection permitted for one AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.2 | Integer32 | read-only | current |
| h3cDot11MaxStationNumPermitted OBJECT-TYPE Represents the maximum number of station connection permitted for one AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.3 | Integer32 | read-only | current |
| h3cDot11ACLoadInfo OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2 | |||
| h3cDot11APConnectCount OBJECT-TYPE Represents the total number of APs which are connecting to AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.1 | Integer32 | read-only | current |
| h3cDot11StationConnectCount OBJECT-TYPE Represents the total number of stations which are accessing the WLAN service through AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.2 | Integer32 | read-only | current |
| h3cDot11ACIFLoadInfoTable OBJECT-TYPE Represents AP number information of interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3 | not-accessible | current | |
| h3cDot11ACIFLoadInfoEntry OBJECT-TYPE Each entry represents AP number information of an interface | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1 | not-accessible | current | |
| h3cDot11ACIfIndex OBJECT-TYPE Represents index of AC interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.1 | Integer32 | accessible-for-notify | current |
| h3cDot11ACIfApNum OBJECT-TYPE Represents AP number connected to the AC interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.2 | Integer32 | read-only | current |
| h3cDot11ACIfStaNum OBJECT-TYPE Represents Station number connected to the AC interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.3 | Integer32 | read-only | current |
| h3cDot11ACIfName OBJECT-TYPE Represents InterfaceName AP number connected to AC interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.4 | OCTET STRING | read-only | current |
| h3cDot11MasterAPCount OBJECT-TYPE Represents the total number of AP which have established the master tunnel with AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.4 | Integer32 | read-only | current |
| h3cDot11SlaveAPCount OBJECT-TYPE Represents the total number of AP which have established the slave tunnel with AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.5 | Integer32 | read-only | current |
| h3cDot11ConnectAutoAPCount OBJECT-TYPE Represents the total number of auto AP which are connecting to AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.6 | Integer32 | read-only | current |
| h3cDot11PersistentAPCount OBJECT-TYPE Represents the total number of persistent AP. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.7 | Integer32 | read-only | current |
| h3cDot11AcUploadFrameCnt OBJECT-TYPE Represents the number of frames that AP sends to AC through LWAPP tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.8 | Counter64 | read-only | current |
| h3cDot11AcDownloadFrameCnt OBJECT-TYPE Represents the number of frames that AC sends to AP through LWAPP tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.9 | Counter64 | read-only | current |
| h3cDot11AcUploadFrameBytes OBJECT-TYPE Represents the bytes of frames that AP sends to AC through LWAPP tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.10 | Counter64 | read-only | current |
| h3cDot11AcDownloadFrameBytes OBJECT-TYPE Represents the bytes of frames that AC sends to AP through LWAPP tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.11 | Counter64 | read-only | current |
| h3cDot11BackupACRole OBJECT-TYPE This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.12 | INTEGER {null(1), master(2), slave(3)} | read-only | current |
| h3cDot11BackupACNMSIP OBJECT-TYPE This object represents the manger IP address of the slave ac. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.13 | IpAddress | read-only | current |
| h3cDot11ACBackupMode OBJECT-TYPE This object represents the ac backup mode. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.14 | INTEGER {null(1), hotBackup(2), coldBackup(3)} | read-only | current |
| h3cDot11ACBackupStatus OBJECT-TYPE This object represents the ac backup status. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.15 | INTEGER {active(1), standby(2)} | read-only | current |
| h3cDot11ACSwitchCnt OBJECT-TYPE This object represents the ac switch times. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.16 | Integer32 | read-only | current |
| h3cDot11WLANAssocStatisInfo OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3 | |||
| h3cDot11StationAssocSum OBJECT-TYPE Represents the total number of station association. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.1 | Counter32 | read-only | current |
| h3cDot11StationAssocFailSum OBJECT-TYPE Represents the total number of station association failure. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.2 | Counter32 | read-only | current |
| h3cDot11StationReassocSum OBJECT-TYPE Represents the total number of station reassociation. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.3 | Counter32 | read-only | current |
| h3cDot11StationAssocRejectedSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.4 | Counter32 | read-only | current |
| h3cDot11StationExDeAuthenSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP). | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.5 | Counter32 | read-only | current |
| h3cDot11StationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.6 | Integer32 | read-only | current |
| h3cDot11ACBASInfo OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4 | |||
| h3cDot11ACBASSysObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.1 | |||
| h3cDot11ACBASTableObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2 | |||
| h3cDot11ACBASIfTable OBJECT-TYPE Represents the BAS information of interfaces. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3 | not-accessible | current | |
| h3cDot11ACBASIfEntry OBJECT-TYPE Each entry represents the BAS information of an interface | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1 | not-accessible | current | |
| h3cDot11ACBASIfIndex OBJECT-TYPE The ifIndex of the BAS interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.1 | Integer32 | not-accessible | current |
| h3cDot11ACBASIfDescr OBJECT-TYPE A textual string containing information about the BAS interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.2 | OCTET STRING (SIZE(0..255)) | read-only | current |
| h3cDot11ACBASIfType OBJECT-TYPE The type of the BAS interface. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.3 | IANAifType | read-only | current |
| h3cDot11ACStaUserSecAuthStatis OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5 | |||
| h3cDot11ACStaUserAuthCurNumber OBJECT-TYPE Represents the current number of user authenticated with this AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.1 | Integer32 | read-only | current |
| h3cDot11ACStaUserConnFailCnt OBJECT-TYPE Represents the total number of user disconnected with this AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.2 | Counter32 | read-only | current |
| h3cDot11ACStaUserAuthReqCnt OBJECT-TYPE Represents the total number of user authenticate request with this AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.3 | Counter32 | read-only | current |
| h3cDot11ACStaUserAuthSuccCnt OBJECT-TYPE Represents the total number of user authenticated successed with this AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.4 | Counter32 | read-only | current |
| h3cDot11ACStaUserAuthFailCnt OBJECT-TYPE Represents the total number of user authenticated failed with this AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.5 | Counter32 | read-only | current |
| h3cDot11CAPWAPTunnelGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.2 | |||
| h3cDot11CAPWAPTunnelTable OBJECT-TYPE The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1 | not-accessible | current | |
| h3cDot11CAPWAPTunnelEntry OBJECT-TYPE Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1 | not-accessible | current | |
| h3cDot11CurrTunnelAPID OBJECT-TYPE To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.1 | H3cDot11ObjectIDType | accessible-for-notify | current |
| h3cDot11CtrlTunnelCurrSec OBJECT-TYPE Represents what security scheme is in use for control tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.2 | H3cDot11TunnelSecSchemType | read-only | current |
| h3cDot11CtrlTunnelUpTime OBJECT-TYPE Represents how long for control tunnel up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.3 | Integer32 | read-only | current |
| h3cDot11DataTunnelCurrSec OBJECT-TYPE Represents what security scheme is in use for data tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.4 | H3cDot11TunnelSecSchemType | read-only | current |
| h3cDot11DataTunnelUpTime OBJECT-TYPE Represents how long for data tunnel up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.5 | Integer32 | read-only | current |
| h3cDot11CtrlTunnelUpTimeTicks OBJECT-TYPE Represents how long control tunnel is up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.6 | TimeTicks | read-only | current |
| h3cDot11ACMtNotifyGroup OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.3 | |||
| h3cDot11ACMtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0 | |||
| h3cDot11ACMtTrapVarObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1 | |||
| h3cDot11ACMtTrapTunlDwnInfo OBJECT-TYPE Represents the reason for tunnel down. The following values are supported: tunnelTimeout(1), - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure(2), - rekey process is failed, tunnel will - be broken. apReset(3), - Administrator reset AP. apCrash(4), - AP reboot for system crash. apDeleted(5) - Delete AP from AC and trigger - tunnel down. apCfgChange(6) - The configuration for AP was changed. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.1 | INTEGER {tunnelTimeout(1), keyUpdateFailure(2), apReset(3), apCrash(4), apDeleted(5), apCfgChange(6)} | accessible-for-notify | current |
| h3cDot11ACMtTrapTunlUpInfo OBJECT-TYPE Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.2 | INTEGER {up(1)} | accessible-for-notify | current |
| h3cDot11ACMtTrapBackupSwitchInfo OBJECT-TYPE Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.3 | INTEGER {masterToSlave(1), slaveToMaster(2)} | accessible-for-notify | current |
| h3cDot11ACMtTrapTnlAPName OBJECT-TYPE Represents name of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.4 | OCTET STRING | accessible-for-notify | current |
| h3cDot11ACMtTrapTnlAPIPAddr OBJECT-TYPE Represents IP address of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.5 | IpAddress | accessible-for-notify | current |
| h3cDot11LoadBalanceType OBJECT-TYPE Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.6 | INTEGER {traffic(1), session(2)} | accessible-for-notify | current |
| h3cDot11LoadBalanceThreshold OBJECT-TYPE Represents the value of load balance threshold. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.7 | Integer32 | accessible-for-notify | current |
| h3cDot11ACMtTrapAPIPv6Addr OBJECT-TYPE Represents IPv6 address of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.8 | OCTET STRING | accessible-for-notify | current |
| h3cDot11ACMtTrapTunlDwnCount OBJECT-TYPE Reprsents how many times that the tunnel between AC and AP has down. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.9 | Integer32 | accessible-for-notify | current |
| h3cDot11ACMaxStaNum OBJECT-TYPE Represents the max number of STA on AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.10 | Integer32 | accessible-for-notify | current |
| h3cDot11ACMtTrapTnlAPSysName OBJECT-TYPE Represents system name of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.11 | OCTET STRING | accessible-for-notify | current |
| h3cDot11ACMtFirstTrapTime OBJECT-TYPE Represents the first trap time. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.12 | TimeTicks | accessible-for-notify | current |
| h3cDot11ACStatusSwitchInfo OBJECT-TYPE Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.13 | INTEGER {activeToStandby(1), standbyToActive(2)} | accessible-for-notify | current |
| h3cDot11SourceACNmsIP OBJECT-TYPE Represents the NMS IP address of master AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.14 | IpAddress | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cDot11ACMtTunnelSetupTrap NOTIFICATION-TYPE This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.1 | current |
| h3cDot11ACMtTunnelDownTrap NOTIFICATION-TYPE This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.2 | current |
| h3cDot11ACMtBackupSwtTrap NOTIFICATION-TYPE This trap is sent by AC when AC switches from master to slave or from slave to master. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.3 | current |
| h3cDot11ACLoadBalanceTrap NOTIFICATION-TYPE This trap is sent by AC when load-balance is enabled on AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.4 | current |
| h3cDot11ACStaFullTrap NOTIFICATION-TYPE This notification will be sent when STA is full on AC. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.5 | current |
| h3cDot11ACStatusSwitchTrap NOTIFICATION-TYPE This notification will be sent when AC switchs from standby to active or from standby to active. | 1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.6 | current |